Railway applications
• Relays
• Time relays
• Monitoring relays
• Sockets
Devices for superior requirements
Reliable and Safe Solutions for Railway and Transportation Applications
Solutions for the transport market need to guarantee safety, security and comfort. The applications are expected
to last a long time under challenging conditions. Be it for high-speed trains, metros, subways or other rail vehicles – in tunnels, on bridges, in train stations, airports, on the open track, or in harbor facilities, the Comat
Releco Group has the right solution for different kind of applications. We offer a wide range of relays, control and
monitoring devices that are developed in compliance with the European Railway Standard EN 50155 (including
also EN 61373, EN 45545 and NF F 16-101/102).
The EN 50155 standard applies for all electronic devices such as command, control, protection units, as well as
power supplies, which are used in the transportation market. It applies either to the accumulator battery side or
also the low-voltage power supply part of the vehicle.
Regarding fire protection, the products offered in this brochure are manufactured in accordance with standard
NF F 16-101/102.
A table a the last page of this brochure shows the overview of the products and the standards they comply
with. Individual declarations of conformity are available on demand. Please do not hesitate to contact us for any
further questions or comments.
Comat AG
Bernstrasse 4
3076 Worb
Switzerland
www.comat.ch
info@comat.ch
Railway applications
C31D/R4
Long life series with twin contacts
C32D/R5
Standard relay
R3-N3x
6
Standard relay
R4-A4x
7
Miniature relay
R7-A2x8
Miniature relay
R7-T2x9
Interface relay
CINT-2110
Interface relay
CINT-2211
Interface relay
CINT-2512
Interface relay
CINT-6113
Interface relay
CINT-6214
Interface relay
CINT-6315
Signal relay
C203.06R16
Power relay
RIC20-x17
Power relay
RIC25-x18
2.
Time Relays
Time functions
Page 19
20
Multifunction Timer, relay change-over
CIM1R21
Multifunction Timer, solid-state AC
CIM12R
22
23
Multifunction Timer, solid-state DC
CIM13R
Multifunction Timer, relay change-over
CIM2R24
Multifunction Timer, solid-state AC
CIM22R25
Multifunction Timer, solid-state DC
CIM23R26
Multifunction Timer, relay change-over
CIM3R27
Multifunction Timer, semi-conductor AC
CIM32R28
Multifunction Timer, semi-conductor DC
CIM33R29
CT-System: Plug-in time modules
CT32R, CT33R, CT36R30
CT32…R, CT33…R, CT36…R31
Plug-in time relays
3.
Monitoring Relays
34
3-phase monitoring
MRU32R
35
1-phase monitoring
MRI11R36
3-phase monitoring
MRI32R37
1-phase monitoring
MRM11R
38
3-phase monitoring
MRM32R
39
CT-System: Plug-in current monitoring modules
CT512R, CT515R, CT516R
40
Plug-in current monitoring set
CT512…R, CT515…R, CT516…R
42
Plug-in DC voltage monitoring module
CT524R41
Plug-in DC voltage monitoring set
CT524…R42
Insulation monitoring
4.
ESU-D2R43
Sockets
2
Page 33
MRU11R
1-phase monitoring
1
Time Relays
Long life series with single contacts
Page 3
Monitoring Relays
Relays
3
Sockets
1.
Relays
Index
Page 45
Socket for 11 pin relays and plug-in modules
C11A
(for relays: C31D/R, C32D/R, R3-N3)
46
Socket for 11 pin relays and plug-in modules
C12B0
(for relays: C31D/R, C32D/R, R3-N3)
47
Socket for 14 pin relays
CS-144
(for relays: R4-A4x)
48
Socket for miniature relays
CS-118
(for relays: R7-x)
49
4
Notes
2 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Relays
1
1.Relays
ApplicationTypes
Output contacts
Design
11 pin plug-in, long life relay
C31D/R
10 A, 250V AC-1
11 pin plug-in, long life relay
C32D/R
6 A, 250V AC-1
11 pin plug-in, standard relay
R3-N3…
6 A, 250V AC-1
14 pin plug-in, standard relay
R4-A4…
8 pin plug-in, miniature standard relay
R7-A2…
10 A, 250V AC-1
8 pin plug-in, miniature standard relay
R7-T2…
6A, 250V AC-1
Interface relay
CINT-21
6A, 250V AC-1
Interface relay
CINT-22
6A, 250V AC-1
Interface relay
CINT-25
2A, 250V AC-1
Interface relay
CINT-61
10A, 250V AC-1
Interface relay
CINT-62
8A, 250V AC-1
Interface relay
CINT-63
8A, 250V AC-1
Interface relay
C203.06
Power relay
RIC20-…
Power relay
RIC25-…
10 A, 250V AC-1
2x
2A, 125V AC-1
;
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
;
;
20 A, 230V AC-1
;
25 A, 230V AC-1
Railway/01a.12 |
3
Long life series with single contacts
C31D/R
11 pin plug-in relay, 3-pole, change-over contacts,
according to IEC 60067
Type: C31D/R …V
Long Life Relays for Railway application, 3 change-over contacts
Types with LED status indicator
Types with free wheeling diode
Manual actuator and mech. status indicator
10 A / 250 V AC-1
10 A / 30 V DC-1
50 mA / 10 V
Contacts
Type single contact micro disconnection
MaterialAgCuNi
Rated current
10 A
Inrush current max. (20 ms)
40 A
Switching voltage AC-1 max.
250 V
AC load max.
2500 VA AC-1
DC load max.
see Fig. 2
Coils (Values are valid at 20 °C)
Operating voltage range
Nominal power DC
Coil Table
Connection diagram
0.7 … 1.25 U N
1.2 W
VN DC
24
36
72
110
8 9 5 7 4 3
2
32 34 22 24 12 14
A1 (+)
31
21
11
A2
11
6
1
10
Fig. 1 AC voltage endurance
Ω
340
780
3200
9700
mA
70
46
23
11
107
AC-1
Cycles
Maximum contact load
Recommended minimum contact load 106
Types with LED indicator take additional 5 … 10 mA @ < 80 V
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
– / 2.5 kV
Contact / contact
– / 2.5 kV
Contact open
– / 1.5 kV
-40 … +70 °C / -40 … +85 °C
12 ms
20 ms
3.5 ms
≥ 108 operations
≤ 360 operations / h
IP 40
80 g
2
3
4
5
6
7
Switching current [ A ]
8
9
10
DC-1
L/R 40 ms
4
3
2
1
0.5
0.3
0.2
0
50
100
150
200
250
Voltage [ V ]
C31D/R DC…V
"…" Enter the voltage for full type designation
Dimensions [mm]
31
51
34
32
11
A1
A2
C11A, C12B0
35
Accessories
Socket:
1
10
8
6
0.1
Standard types
DC: 24, 36, 72, 110 V
0
Fig. 2 DC load limit curve
Current [A]
General Specifications
Ambient temperature operation / storage
Pick-up time typ.
Release time typ.
Bounce time NO contact typ.
Mechanical life
Operating frequency at nominal load
Ingress protection rating
Weight
105
10
11 1
2
9
3
8
4
24
7 6 5
21
14
12
22
35
Technical approvals, conformities
See table on page 53.
4 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Long life series with twin contacts
C32D/R
Relays
11 pin plug-in relay, 3-pole, change-over twin contacts,
according to IEC 60067
Type: C32D/R …V
Long Life Relays for Railway application, 3 change-over twin contacts
Types with LED status indicator
Types with free wheeling diode
Manual actuator and mech. status indicator
1
6 A / 250 V AC-1
6 A / 30 V DC-1
10 mA / 5 V
Contacts
Type twin contact micro disconnection
MaterialAgCuNi
Rated current
6A
Inrush current max. (20 ms)
15 A
Switching voltage AC-1 max.
250 V
AC load max.
1500 VA AC-1
DC load max.
see Fig. 2
Coils (Values are valid at 20 °C)
Operating voltage range
Nominal power DC
Coil Table
Connection diagram
0.7 … 1.25 U N
1.2 W
VN DC
24
36
110
Ω
340
780
9700
mA
70
46
11
31
21
11
A2
11
6
1
10
107
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
– / 2.5 kV
Contact / contact
– / 2.5 kV
Contact open
– / 1.5 kV
AC-1
106
0
1
2
3
4
Switching current [A]
5
6
Fig. 2 DC load limit curve
10
8
6
4
3
Current [A]
-40 … +70 °C / -40 … +85 °C
12 ms
20 ms
3.5 ms
≥ 108 operations
≤ 360 operations / h
IP 40
80 g
DC-1
L/R 40 ms
2
1
0.5
0.3
0.2
Standard types
DC: 24, 36, 110 V
2
A1 (+)
Fig. 1 AC voltage endurance
Types with LED indicator take additional 5 … 10 mA @ < 80 V
General Specifications
Ambient temperature operation / storage
Pick-up time typ.
Release time typ.
Bounce time NO contact typ.
Mechanical life
Operating frequency at nominal load
Ingress protection rating
Weight
8 9 5 7 4 3
32 34 22 24 12 14
Cycles
Maximum contact load
Recommended minimum contact load C32D/R DC…V
0.1
0
50
100
150
Voltage [V]
200
250
"…" Enter the voltage for full type designation
Accessories
Socket:
Dimensions [mm]
C11A, C12B0
31
35
51
32
11
A1
A2
34
10
11 1
2
9
3
8
4
24
7 6 5
21
14
12
22
35
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
5
Standard Relays
R3-N3…
11-pin plug-in relay, 3-pole, change-over contacts,
according to IEC 60067
Type: R3-Nxx/…V
Relays for Railway application, 3 change-over contacts
Maximum contact load
Recommended minimum contact load
6 A / 250 V AC-1, 6 A / 30 V DC-1
10 mA / 10 V Code 4
5 mA / 5 V Code 8
Contacts
Material
Optional
Optional
Rated current Inrush current max. (20 ms)
Switching voltage AC-1 max.
AC load max.
DC load max.
AgNi + 0.2µ Au
AgNi + 10µ Au
6A
15 A
250 V
see Fig. 1
see Fig. 2
Coil (Values are valid at 20 °C)
Coil resistance
Operating voltage range
Nominal power
Coil Table
Connection diagram
4 3
5 7
8
12 14
22 24
32 34
11
21
31
A2
1
6
11
10
see table; tolerance ± 10 %
0.7 … 1.25 U N
1.1 W
V DC
Ω
mA
24
48
72
110
525
2133
4844
12900
46
22
15
9
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
4 kV / 2.5 kV
Contact / contact
4 kV / 2.5 kV
Contact open
1.5 kV / 1 kV
Standard types
DC: 24, 48, 72, 110 V
Free wheeling diode
LED
LED + free wheeling diode
R3-N34/DC…V
R3-N34D/DC…V
R3-N34X/DC…V
R3-N34DX/DC…V
R3-N38/DC…V
R3-N38D/DC…V
R3-N38X/DC…V
R3-N38DX/DC…V*
106
Accessories
Socket: Optional accessories (blanking plug): C11A, C12B0
SO-NP, SO-OP
0
1
2
3
4
Switching current [ A]
6
5
6
DC-1
L/R 40 ms
4
3
2
1
0.5
0.3
0.2
0.1
"..." Enter the voltage for full type designation
AC-1
cos phi 0.4
Fig. 2 DC load limit curve
Current [A]
- 25 (no ice) … +70 ºC / -40 … +80 °C
18 ms / ≤ 3 ms
35 ms / ≤ 1 ms
> 10 millions
IP 40
95 g
2
A1 (+)
107
105
Specifications
Ambient temperature operation / storage
Pick-up time / bounce time
Release time / bounce time (D version)
Mechanical life
Ingress protection rating
Weight
9
Fig. 1 AC voltage endurance
Cycles
Code 4
Code 8
0
50
100
150
Voltage [ V ]
200
250
Dimensions [mm]
1
11
A1
9
58.5
8
4
3
35
2
10
A2
7
6
5
35
Technical approvals, conformities
See table on page 53.
6 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Standard Relays
R4-A4…
Relays
14-pin plug-in relay, 4-pole, change-over contacts
Type: R4-A4xx/…V
Relays for Railway application, 4 change-over contacts
Maximum contact load
Recommended minimum contact load
6 A / 250 V AC-1, 0.5 A / 110 V DC-1
6 A / 30 V DC-1, 0.2 A / 220 V DC-1
10 mA / 10 V Code 4
5 mA / 5 V Code 8
Contacts
Material
Optional
Optional
Rated current
Inrush current max. (20 ms)
Switching voltage AC-1 max.
AC load max.
DC load max.
AgNi + 0,2 µ Au
AgNi + 10 µ Au
6A
18 A
250 V
see Fig.1
see Fig. 2
Code 4
Code 8
Coil (Values are valid at 20 °C)
Coil resistance
Operating voltage range
Nominal power
1
Connection diagram
1 2 4 5 7 8 10 11
13
12 14 22 24 32 34 42 44
A1 (+)
see table; tolerance ± 10 %
0.7 … 1.25 U N
1.4 W
11
21
31
41
A2
3
6
9
12
14
Fig. 1 AC voltage endurance
V DC
Ω
mA
24
36
48
72
110
426
881
1500
3456
8231
56
41
32
21
13
107
Cycles
Coil Table
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
4 kV / 2.5 kV
Contact / contact
4 kV / 2.5 kV
Contact open
1.5 kV / 1 kV
-25 (no ice) … +55 °C / -40 … +80 °C
15 ms / ≤ 2 ms
20 ms / ≤ 2 ms
> 20 millions
IP40
90 g
Standard types
DC: 24, 36, 48, 72, 110 V
LED
Free wheeling diode
Polarity and free wheeling diode
R4-A44/DC…V
R4-A44X/DC…V
R4-A44DX/DC…V
R4-A44FX/DC…V
106
105
R4-A48/DC…V
R4-A48X/DC…V
R4-A48DX/DC…V
R4-A48FX/DC…V
0
1
2
3
4
Switching current [ A]
5
6
Fig. 2 DC load limit curve
6
DC-1
L/R 40 ms
4
3
2
Current [A]
Specifications
Ambient temperature operation / storage
Pick-up time / bounce time
Release time / bounce time
Mechanical life
Ingress protection rating
Weight
AC-1
cos phi 0.4
1
0.5
0.3
0.2
0.1
0
50
100
150
Voltage [ V ]
200
250
"..." Enter the voltage for full type designation
Dimensions [mm]
CS-144
SO-NP, SO-OP
35
1
52.5
Accessories
Socket: Optional accessories (blanking plug): 4
2
5
7
10
11
8
6
9
3
12
13
14
35
3
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
7
Miniature relays
R7-A2…
8-pin plug-in miniature relay, 2-pole, change-over contacts
Type: R7-A2x/…V
Relays for Railway application, sensitive, 2 change-over contacts
Maximum contact load:
Recommended minimum contact load
10 A / 250 V AC-1, 10 A / 30 V DC-1
10 mA / 10 V Code 4
5 mA / 5 V Code 8
Contacts
Material
Optional
Optional
Rated current
Inrush current max. (20 ms)
Switching voltage AC-1 max.
AC load max.
DC load max.
AgNi + 0.2µ Au
AgNi + 10µ Au
10 A
30 A
250 V
see Fig. 1
see Fig. 2
Coil Table
Ω ± 10%
535
2004
4750
11337
mA
45
24
15
10
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
4 kV / 2.5 kV
Contact / contact
4 kV / 2.5 kV
Contact open
1.5 kV / 1 kV
Standard types
DC: 24, 48, 72, 110 V
LED:
Free wheeling diode:
LED + free wheeling diode:
R7-A24/DC…V
R7-A24X/DC…V
R7-A24D/DC…V
R7-A24DX/DC…V
11
21
A2
5
6
8
0
1
2
3
4
5
6
7
Switching current [ A]
8
9
10
Fig. 2 DC load limit curve
10
8
6
4
3
DC-1
L/R 40 ms
2
1
0.5
0.3
0.2
0
50
100
150
Voltage [ V ]
200
250
Dimensions [mm]
37.5
CS-118
AC-1
cos phi 0.4
106
0.1
"..." Enter the voltage for full type designation
Accessories
Socket: R7-A28/DC…V
R7-A28X/DC…V
R7-A28D/DC…V
R7-A28DX/DC…V
7
A1(+)
107
Current [A]
-25 (no ice) … +70 ºC / -40 … +80 °C
> 20 millions
10 ms
15 ms
IP40
35 g
4
Fig. 1 AC voltage endurance
105
Specifications
Ambient temperature operation / storage
Number of mechanical operations
Pick-up time typ.
Release time typ.
Ingress protection rating
Weight
2
22 24
see table; tolerance ±10 %
0.7 … 1.25 U N
1.1 W
V DC
24
48
72
110
3
1
12 14
28
Coil (Values are valid at 20 °C)
Coil resistance
Operating voltage range
Nominal power
Connection diagram
Cycles
Code 4
Code 8
1
2
3
4
5
7
A
6
8
B
21
4.75
Technical approvals, conformities
See table on page 53.
8 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Miniature relays
R7-T2…
Relays
8-pin plug-in miniature relay, 2-pole, change-over twin contacts
Type: R7-T2x/…V
Relays for Railway application, 2 change-over twin contacts
Maximum contact load
Recommended minimum contact load
6 A / 250 V AC-1, 6 A / 30 V DC-1
5 mA / 5 V Code 1
1 mA / 5 V Code 2
Contacts
Material
Standard
Optional
Rated current
Inrush current max. (20 ms)
Switching voltage AC-1 max.
AC load max.
DC load max.
AgNi + 0.2µ Au
AgNi + 10µ Au
6A
15 A
250 V
see Fig. 1
see Fig. 2
Connection diagram
1 3
12
Coil Table
see table; tolerance ± 10 %
0.7 … 1.25 U N
1.1 W
V DC
24
48
72
110
Ω ± 10%
535
2004
4750
11337
mA
45
24
15
10
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
4 kV / 2.5 kV
Contact / contact
4 kV / 2.5 kV
Contact open
1.5 kV / 1 kV
Standard types
DC: 24, 48, 72, 110 V
LED:
Free wheeling diode:
LED + free wheeling diode:
R7-T21/DC…V
R7-T21X/DC…V
R7-T21D/DC…V
R7-T21DX/DC…V
R7-T22/DC…V
R7-T22X/DC…V
R7-T22D/DC…V
R7-T22DX/DC…V
CS-118
21
A2
5
6
8
AC-1
0
1
2
3
4
Switching current [ A]
6
5
6
DC-1
L/R 40 ms
4
3
2
1
0.5
0.3
0.2
0
50
100
150
Voltage [ V ]
200
250
Dimensions [mm]
37.5
Accessories
Socket: 11
106
0.1
"..." Enter the voltage for full type designation
7
A1(+)
Fig. 2 DC load limit curve
Current [A]
-25 (no ice) … +70 ºC / -40 … +80 °C
> 20 millions
10 ms
15 ms
IP40
35 g
4
24
107
105
Specifications
Ambient temperature operation / storage
Number of mechanical operations
Pick-up time typ.
Release time typ.
Ingress protection rating
Weight
2
22
Fig. 1 AC voltage endurance
Cycles
Coil (Values are valid at 20 °C)
Coil resistance
Operating voltage range
Nominal power
14
28
Code 1
Code 2
1
1
2
3
4
5
7
A
6
8
B
21
4.75
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
9
Interface relays 6.2 mm
CINT-21
Interface module with mechanical change-over output contact,
DIN rail mounting
Types: CINT-21/…V
Standard interface module, 1 change-over contact
Cage clamp terminal
Control voltage UC 24 V, 50/60 Hz
Green LED for status indication
Max. contact load
6 A / 250 V AC-1
Contact Data
Type micro disconnection
MaterialAgSnO2
Rated current
6A
Inrush current max. (5 ms)
30 A
Switching voltage AC-1 max.
250 V
AC load max.
1500 VA
DC load max.
see Fig. 2
Recommended min. contact load
10 mA / 12 V
Connection diagram
RELAY
A1
Control input Vn =
Operating voltage range
Typical input current
Nominal power consumption
UC 24 V
16.3 … 30 V
11 mA
260 mW
Fig. 1 AC voltage endurance
107
Cycles
-40 … + 70 °C / -40 … + 85 °C
5 ms
10 ms
≥ 107 / ≥ 105 operations
stranded wire 0.5 … 1.5 mm2
IP 20
any
Polyamid
105
104
0
1
2
3
4
6
Fig. 2 DC load limit curve
6
5
CINT-21/UC24V
CINT-BR20 (2 x 10 pin)
CINT-BEZ/64 (64 pieces)
CINT-R1/DC24V
5
Switching current [A]
DC-1
2
Current [A]
Accessories
Plug-in bridges:
Label plate:
Replacement relay for CINT-21:
AC-1
106
Standard types
UC 24 (AC/DC):
11
12
SOCKET
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
6 kV / 4 kV
Contact open
1.5 kV / 1 kV
General Specifications
Ambient temperature operation / storage
Typical response time @ Vn
Typical release time @ Vn
Service life mech. / elec.
Cond. cross section cage clamp terminal
Ingress protection rating
Mounting position
Housing material
14
A2
1
0.5
0.3
0.2
0.1
0
50
100
150
Voltage [ V ]
200
250
Dimensions [mm]
Connector bridge
CINT-BR20
12
11
49,2
14
44,3
TS35
93,5
Label
included
CINT-BR8
A1
A2
6,2
3,4
73
Technical approvals, conformities
See table on page 53.
10 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Interface relays 6.2 mm
CINT-22
Relays
Interface module with mechanical change-over output contact,
DIN rail mounting
Types: CINT-22/UC24V
Standard interface module, 1 change-over contact
Cage clamp terminal
Control voltage UC 24 V, 50/60 Hz
Green LED for status indication
Max. contact load
6 A / 250 V AC-1
Contact Data
Type Material
Rated current
Inrush current max. (20 ms)
Switching voltage AC-1 max.
AC load max.
DC load max.
Recommended min. contact load
micro disconnection
Ag Ni +5μ Au
6A
10 A
250 V
1500 VA
see Fig. 2
1 mA / 1 V
Control input Vn =
Operating voltage range
Typical input current
Nominal power consumption
UC 24 V
16.8 … 30 V
11 mA
260 mW
1
Connection diagram
RELAY
A1
Fig. 1 AC voltage endurance
107
106
105
104
1
2
3
4
6
5
CINT-22/UC24 V
CINT-BR20 (2 x 10 pin)
CINT-BEZ/64 (64 pieces)
CINT-R2/DC24V
5
6
Fig. 2 DC load limit curve
DC-1
2
Current [A]
Accessories
Plug-in bridges:
Label plate:
Replacement relay for CINT-22:
0
Switching current [A]
Standard types
UC 24 (AC/DC):
AC-1
Cycles
-40 … +70 °C / -40 … +85 °C
5 ms
10 ms
≥ 107 / ≥ 105 operations
stranded wire 0.5 … 1.5 mm2
IP 20
any
Polyamid
11
12
SOCKET
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
6 kV / 4 kV
Contact open
1.5 kV / 1 kV
General Specifications
Ambient temperature operation / storage
Typical response time @ Vn
Typical release time @ Vn
Service life mech. / elec.
Cond. cross section cage clamp terminal
Ingress protection rating
Mounting position
Housing material
14
A2
1
0.5
0.3
0.2
0.1
0
50
100
150
Voltage [ V ]
200
250
Dimensions [mm]
Connector bridge
CINT-BR20
12
11
49,2
14
44,3
TS35
93,5
Label
included
CINT-BR8
A1
A2
6,2
3,4
73
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
11
Interface relays 6.2 mm
CINT-25
Interface module with solide state DC output,
DIN rail mounting
Types: CINT-25/UC24V
Standard interface module, Solide state DC
Cage clamp terminal
Control voltage UC 24 V, 50/60 Hz
Green LED for status indication
Max. contact load
2 A / 24 V DC-1
Contact Data
Type Material
Rated current
Inrush current max. (10 ms)
Switching voltage DC-1 max.
DC load max.
Recommended min. contact load
micro disconnection
Solide state
2A
20 A
30 V
48 W
1 mA, 6 V
Control input Vn =
Operating voltage range
Typical input current
Nominal power consumption
UC 24 V
16.8 … 30 V
11 mA
260 mW
Connection diagram
RELAY
(+)
A1
14
A2
11
12
SOCKET
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Input / output
– / 2.5 kV
General Specifications
Ambient temperature operation / storage
Typical response time @ Vn
Typical release time @ Vn
Cond. cross section cage clamp terminal
Ingress protection rating
Mounting position
Housing material
-40 … + 55 °C / - 40 … + 85 °C
1 ms
1 ms
stranded wire 0.5 … 1.5 mm2
IP 20
any
Polyamid
Standard types
UC 24 (AC/DC):
Accessories
Plug-in bridges: Label plate: Replacement relay for CINT-25: CINT-25/UC24V
CINT-BR20 (2 x 10 pin)
CINT-BEZ/64 (64 pieces)
CINT-R5/DC24V
Dimensions [mm]
Connector bridge
CINT-BR20
12
11
49,2
14
44,3
TS35
93,5
Label
included
CINT-BR8
A1
A2
6,2
3,4
73
Technical approvals, conformities
See table on page 53.
12 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Interface relays 14 mm
CINT-61
Relays
Interface module with mechanical change-over output contact,
DIN rail mounting
Types: CINT-61/UC24V
Standard interface module, 1 change-over contact
Cage clamp terminal
Control voltage UC 24 V, 50/60 Hz
Green LED for status indication
Contact Data
Type micro disconnection
MaterialAgSnO2
Rated current
10 A / (16 A*)
Inrush current max. (5 ms)
80 A
Switching voltage AC-1 max.
250 V
AC load max.
4000 VA
DC load max.
see Fig. 2
Recommended min. contact load
10 mA, 24 V
* For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12)
Control input Vn =
Operating voltage range
Typical input current
Nominal power consumption
UC 24 V
16.8 … 30 V
20 mA
480 mW
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
6 kV / 4 kV
Contact open
1.5 kV / 1 kV
General Specifications
Ambient temperature operation / storage
Typical response time @ Vn
Typical release time @ Vn
Service life mech. / elec.
Cond. cross section cage clamp terminal
Ingress protection rating
Mounting position
Housing material
1
10 A / 250 V AC-1
-40 … + 70 °C / -40 … + 85 °C
5 ms
10 ms
≥ 107 / ≥ 105 operations
stranded wire 0.5 … 1.5 mm2
IP 20
any
Polyamid
Connection diagram
RELAY
A1
Fig. 1 AC voltage endurance
107
CINT-BR8/5 (5 pieces x 8 pin)
CINT5-BEZ/18 (18 pieces)
CINT-R21/DC24V
AC-1
106
105
104
0
2
4
6
8
10
12
Switching current [A]
14
16
Fig. 2 DC load limit curve
10
16
10
DC-1
5
Current [A]
Accessories
Plug-in bridges: Label plate: Replacement relay for CINT-61: CINT-61/UC24 V
22 21 24
SOCKET
Standard types
UC 24 (AC/DC):
12 11 14
A2
Cycles
Max. contact load
2
1
0.5
0.3
0.2
0.1
0
50
100
150
Voltage [V]
200
250
Dimensions [mm]
22 NC 12
21 COM 11
220-240
VU
TS35
93
45
RELAYS
48
24 NO 14
A1
A2
14
3,4
72
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
13
Interface relays 14 mm
CINT-62
Interface module with 2 mechanical change-over output contacts,
DIN rail mounting
Types: CINT-62/UC24V
Standard interface module, 1 change-over contact
Cage clamp terminal
Control voltage UC 24 V, 50/60 Hz
Green LED for status indication
Max. contact load
8 A / 250 V AC-1
Contact Data
Type Material
Rated current
Inrush current max. (20 ms)
Switching voltage AC-1 max.
AC load max.
DC load max.
Recommended min. contact load
micro disconnection
Ag Ni +5μ Au
8A
15 A
250 V
2000 VA
see Fig. 2
5 mA / 5 V
Control input Vn =
Operating voltage range
Typical input current
Nominal power consumption
UC 24 V
16.8 … 30 V
20 mA
480 mW
RELAY
A1
Fig. 1 AC voltage endurance
107
AC-1
Cycles
106
-40 … +70 °C / -40 … +85 °C
5 ms
10 ms
≥ 107 / ≥ 105 operations
stranded wire 0.5 … 1.5 mm2
IP 20
any
Polyamid
105
104
0
1
2
3
4
5
Switching current [A]
6
7
8
Fig. 2 DC load limit curve
10
8
DC-1
5
CINT-62/UC24V
CINT-BR8/5 (5 pieces x 8 pin)
CINT5-BEZ/18 (18 pieces)
CINT-R22/DC24V
Current [A]
Accessories
Plug-in bridges:
Label plate:
Replacement relay for CINT-62:
22 21 24
SOCKET
Standard types
UC 24 (AC/DC):
12 11 14
A2
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
6 kV / 4 kV
Contact / contact
4 kV / 2 kV
Contact open
1.5 kV / 1 kV
General Specifications
Ambient temperature operation / storage
Typical response time @ Vn
Typical release time @ Vn
Service life mech. / elec.
Cond. cross section spring cage
Ingress protection rating
Mounting position
Housing material
Connection diagram
2
1
0.5
0.3
0.2
0.1
0
50
100
150
Voltage [V]
200
250
Dimensions [mm]
22 NC 12
21 COM 11
220-240
VU
TS35
93
45
RELAYS
48
24 NO 14
A1
A2
14
3,4
72
Technical approvals, conformities
See table on page 53.
14 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Interface relays 14 mm
CINT-63
Relays
Interface module with 2 mechanical change-over output contacts,
DIN rail mounting
Types: CINT-63/UC24V
Standard interface module, 1 change-over contact
Cage clamp terminal
Control voltage UC 24 V, 50/60 Hz
Green LED for status indication
Contact Data
Type micro disconnection
MaterialAg Ni
Rated current
8A
Inrush current max. (20 ms)
15 A
Switching voltage AC-1 max.
250 V
AC load max.
2000 VA
DC load max.
see Fig. 2
Recommended min. contact load
10 mA / 24 V
Control input Vn =
Operating voltage range
Typical input current
Nominal power consumption
UC 24 V
16.8 … 30 V
20 mA
480 mW
Insulation
Pulse (1.2 / 50 us / Dielectric strength (V rms, 1 minute)
Contact / coil
6 kV / 4 kV
Contact / contact
4 kV / 2 kV
Contact open
1.5 kV / 1 kV
General Specifications
Ambient temperature operation / storage
Typical response time @ Vn
Typical release time @ Vn
Service life mech. / elec.
Cond. cross section cage clamp terminal
Ingress protection rating
Mounting position
Housing material
1
8 A / 250 V AC-1
-40 … +70 °C / -40 … +85 °C
5 ms
10 ms
≥ 107 / ≥ 105 operations
stranded wire 0.5 … 1.5 mm2
IP 20
any
Polyamid
Connection diagram
RELAY
A1
SOCKET
Fig. 1 AC voltage endurance
107
AC-1
106
105
104
0
1
2
3
4
5
Switching current [A]
6
7
8
Fig. 2 DC load limit curve
10
8
DC-1
5
CINT-63/UC24 V
CINT-BR8/5 (5 pieces x 8 pin)
CINT5-BEZ/18 (18 pieces)
CINT-R23/DC24V
Current [A]
Accessories
Plug-in bridges: Label plate: Replacement relay for CINT-63: 22 21 24
A2
Standard types
UC 24 (AC/DC):
12 11 14
Cycles
Max. contact load
2
1
0.5
0.3
0.2
0.1
0
50
100
150
Voltage [V]
200
250
Dimensions [mm]
22 NC 12
21 COM 11
220-240
VU
TS35
93
45
RELAYS
48
24 NO 14
A1
A2
14
3,4
72
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
15
Signal relays
C203.06R
Interface module with 2 mechanical change-over twin contacts,
DIN rail mounting
Types: 203.06R/…V
Standard interface module, 2 separate change-over contacts
Screw terminals
Control voltage UC 24 or 36 V, 50/60 Hz
LED status indicator for each channel
Sealed relays built in
Also suitable for panel mounting 2 x M4
Max. contact load
2 A / 30 V DC-1
Contact Data
Type Material
Rated current
Switching voltage AC-1 max.
AC load max.
DC load max.
Recommended min. contact load
twin contacts
Ag + Au
2A
125 V
100 VA
see Fig. 2
10 μA / 10 mV
Connection diagram
A1 A1 A2
1 2
1
11 12 14
UC 24 V
16.8 … 30 V
18 mA
220 mW
UC 36 V
25.2 … 45 V
9 mA
330 mW
2
11 12 14
Fig. 1 DC voltage endurance
106
Insulation
Contact / Coil
2.5 kVrms 1 minute
General Specifications
Ambient temperature operation / storage
Typical response time @ Vn
Typical release time @ Vn
Service life mech. / elec.
Cond. cross section screw terminal
Ingress protection rating
Max. screw torque
Mounting position
Housing material
Weight
-40 … +70 °C / -40 … +85 °C
10 ms
20 ms
≥ 107 / ≥ 10 5 operations
stranded wire 2.5 mm2, 2 x 1.5 mm2
IP 20
0.4 Nm
any
Lexan
80 g
DC-1 30V
Cycles
Control input Vn =
Operating voltage range
Typical input current
Nominal power consumption (per channel)
105
0
0.2
0.4
0.6 0.8
1
1.2 1.4
Switching current [A]
1.6
1.8
2
Fig. 2 DC load limit curve
DC-1
2
Standard types
C203.06R/UC…V
"…" Enter the voltage for full type designation
Accessories
Label plate: 1
Current [A]
UC (AC DC): 24, 36 V
0.5
0.3
BZS-DIN17.5
0.2
0.1
0
50
100
150
Voltage [ V ]
Dimensions [mm]
4,2
17,5
2,5
TS 35
75
LABEL
5
64
Technical approvals, conformities
See table on page 53.
16 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Power relays
RIC20-…
Relays
20 A, AC/DC control voltage, silent operation,
DIN rail mounting according to DIN 43 880
Type: RIC20-xxx/…V
Hum-free installation contactor, 2 contacts, 2 NO, 1 NO-1 NC, 2 NC types available
4 kW / 230 V AC-1, 0.5 A / 220 V DC-1
10 mA / 24 V
Contacts
MaterialAgNi
Rated current
20 A
Inrush current max. (100 ms)
50 A
Switching voltage AC-1 max.
400 V
AC load max. AC-1, AC-7a
4 kW / 230 V
AC-3
1.3 kW /230 V (NO contact only)
DC load max.
see Fig. 1
Control input Vn =
Operating voltage range [V]
Typ. pic up voltage [V]
Typ. release voltage [V]
Power consumption [W]
Inductive turn-off voltage
Surge immunity EN 61000-4-5
UC 24 V
20.4 … 26.4
17
7
≤ 2.5
None
2 kV
Insulation
Rated insulation voltage
Rated impulse withstand voltage Min. clearance of open contact
230 V
4 kV
3.6 mm
General Specifications
Ambient temperature
storage
operation, Spacer after 2 contactors side by side
operation, Spacer after 3 contactors side by side
Pick-up time
Release time
Mechanical life
AC voltage endurance at rated load AC-3, AC-7b
DC voltage endurance at rated load DC-1
Operating frequency at rated load DC-1
Operating frequency at rated load AC-1
Conductor cross section coil /contacts
Max. Screw torque coil / contacts
Ingress protection rating
Weight
-30 … +80 °C
-5 … +55 °C
-5 … +40 °C
15 … 45 ms
20 … 50 ms
≥ 3 x 106 operations
≥ 3 x 105 operations
105 operations
≤ 300 operations / h
≤ 600 operations / h
Stranded wire 2.5 mm2 / 6 mm2
0.6 Nm / 1.2 Nm
IP 20
140 g
UC 36 V
30.6 … 39.6
25
11
≤ 2.5
None
2 kV
UC 230 V
195 … 253
160
70
≤ 2.5
None
2 kV
1
Connection diagram
1A13
1 A1 R1
R1 A1 R3
2A24
2 A2 R2
R2 A2 R4
2x NO
RIC20-200
1x NO + 1x NC
RIC20-110
2 x NC
RIC20 -020
Coil circuit
A1
U
A2
Fig. 1 DC load limit curve DC-1
DC-1
DC-3
DC-5
20
10
5
Current [A]
Rated operational power
Recommended minimum contact load
2
1
0.5
0.2
0.1
0.05
0
50
100
150
Voltage [ V ]
200
250
Standard types
Accessories
Auxiliary contact bloc: Sealing cover: Spacer: RIC-AUX… RIC25, 40, 63
RIC-SEAL20
RIC-DIST
Samples of lamp loads
Incandescent lamps 230 V / 100 W
Fluorescent lamps not corrected 230 V / 36 W
Fluorescent lamps electronic ballast units 36 W
Number of lamps
20
17
15
Dimensions [mm]
*Option:
Sealing cover
Type: RIC-SEAL 20
1.5*
17,5
Mounting information
If multiple contactors are mounted side by side, spacers (RIC DIST) have to be inserted for the purpose of heat dissipation.
Example: Ambient temperature up to 40°C: 1 spacer after 3 RIC // 40…55°C: 1 spacer after 2 RIC.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
45
RIC20-200/UC …V
RIC20-110/UC …V
RIC20-020/UC …V
TS 35
"…" Enter the voltage for full type designation
2NO:
1NO + 1NC:
2NC:
85
UC (AC/DC) 50/60 Hz: 24, 36, 230 V
5
44 (45.5* )
16.5
Technical approvals, conformities
See table on page 53.
Railway/01a.12 |
17
Power relays
RIC25-…
25 A, AC/DC control voltage, silent operation
DIN Rail mounting according to DIN 43 880
Type: RIC25-xxx/…V
Hum-free installation contactor, 4
contacts, 4 NO, 4 NC, 2 NO-2 NC types available
Rated operational power AC-1Single phase: 5.4 kW/230 V, 0.5 A/220 V DC-1
3 phase 230 V: 9 kW
3 phase 400 V: 16 kW
Recommended minimum contact load
10 mA / 24 V
Contacts
MaterialAgNi
Rated current
25 A
Inrush current max. (100 ms)
50 A
Switching voltage AC-1 max.
400 V
AC load max. AC-1, AC-7a
4 kW / 230 V
AC-3
2.2 kW /230 V, 4 kW / 400 V
DC load max.
see Fig. 1
Control input Vn =
Operating voltage range [V]
Typ. pic up voltage [V]
Typ. release voltage [V]
Power consumption [W]
Inductive turn-off voltage
Surge immunity EN 61000-4-5
UC 24 V
20.4 … 26.4
17
7
≤3
None
2 kV
Insulation
Rated insulation voltage
Rated impulse withstand voltage Min. clearance of open contact
440 V
4 KV
3.6 mm
General Specifications
Ambient temperature
storage
operation, Spacer after 2 contactors side by side
operation, Spacer after 3 contactors side by side
Pick-up time
Release time
Mechanical life
AC voltage endurance at rated load AC-3, AC-7b
DC voltage endurance at rated load DC-1
Operating frequency at rated load DC-1
Operating frequency at rated load AC-1, AC-3
Conductor cross section coil / contacts terminals
Max. Screw torque coil / contacts
Ingress protection rating
Weight
-30 … +80 °C
-5 … +55 °C
-5 … +40 °C
15 … 45 ms
20 … 70 ms
≥ 3 x 106 operations
≥ 5 x 105 operations
105 operations
≤ 300 operations / h
≤ 600 operations / h
Stranded wire 2.5 mm2 / 6 mm2
0.6 Nm / 1.2 Nm
IP 20
270 g
UC 36 V
30.6 … 39.6
25
11
≤3
None
2 kV
Connection diagram
UC 230 V
195 … 253
160
70
≤3
None
2 kV
1 3 A1 5 7
R1 R3 A1 R5 R7
2 4 A2 6 8
4x NO: RIC25-400
R2 R4 A2 R6 R8
4x NC: RIC25-040
1 R1 A1 R3 3
2 R2 A2 R4 4
2x NO + 2x NC: RIC25-220
Coil circuit
A1
U
A2
Fig. 1 DC load limit curve DC-1
25
DC-1
DC-3
DC-5
15
10
Current [A]
5
2
1
0.5
0.2
0.1
0
50
100
150
Voltage [ V ]
200
250
Standard types
RIC25-400/UC…V
"…" Enter the voltage for full type designation
2NO + 2NC:
4NC:
RIC25-220/UC…V
RIC25-040/UC…V
RIC-AUX…
RIC-SEAL25
RIC-DIST
Samples of lamp loads
Incandescent lamps 230 V/ 100 W
Fluorescent lamps not corrected 230 V/ 36 W
Fluorescent lamps electronic ballast units 36 W
Number of lamps
20
20
20
Mounting information
If multiple contactors are mounted side by side, spacers (RIC DIST) have to be inserted for the purpose of heat dissipation.
Example: Ambient temperature up to 40°C: 1 spacer after 3 RIC // 40…55°C: 1 spacer after 2 RIC.
18 | Railway/01a.12
*Option:
Sealing cover
Type: RIC-SEAL25
85
Accessories
Auxillary contact bloc:
Sealing cover:
Spacer:
Dimensions [mm]
45
4NO:
TS 35
UC (AC/DC) 50/60 Hz: 24, 36, 230 V
1.5*
35
5
44 ( 45.5*)
16.5
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Time Relays
2. Time Relays
✪
TF-60 Setting of long times
2
The TF 60 time setting methode permits short examination of long delay time settings. Elapsing times of
hours can be monitored in the sec. range.
Example for a delay time of 38h:
1.Set range switch to 60sec
2.Set 38sec on the potentiometer (e.g. check 38sec
by chronometer)
3.Set range switch to 60h
The delay time now amounts to 38h.
ApplicationTypes
Functions*
t min. – max. Output contacts
Time relay with mechanical CO output contact
CIM1R
E, A, W, N, K, B, B1, S, LS
50 ms – 60 h✪
Time relay with AC solide-state output
CIM12R
E, A, W, N, K, B, B1, S, LS
50 ms – 60 h✪
2 A 250 V
Time relay with DC solide-state output
CIM13R
E, A, W, N, K, B, B1, S, LS
50 ms – 60 h✪
5 A 24 VD
Time relay with mechanical CO output contact
CIM2R
E, A, L, M, B2, G, H
50 ms – 60 h✪
Time relay with AC solide-state output
CIM22R
E, A, L, M, B2, G, H
50 ms – 60 h✪
2A 250V
Time relay with AC solide-state output
CIM23R
E, A, L, M, B2, G, H
50 ms – 60 h✪
5A 24VD
Time relay with mechanical CO output contact
CIM3R
F, Q, G, H, I, P
50 ms – 60 h✪
Time relay with AC solide-state output
CIM32R
F, Q, G, H, I, P
50 ms – 60 h✪
2A 250V
Time relay with DC solide-state output
CIM33R
F, Q, G, H, I, P
50 ms – 60 h✪
5 A 24 VD
Modular time relay with power CO output contacts
CT32.31
E, A, W, N, K, B, B1
0.15 s – 60 min
10 A
Modular time relay with 3 twin CO output contacts
CT32.32
E, A, W, N, K, B, B1
0.15 s – 60 min
6 A
Modular time relay with power CO output contacts
CT33.31
E, A, F, W, N, Q, K, L, B, B1, G, H
30 ms – 60 h✪
10 A
Modular time relay with 3 twin CO output contacts
CT33.32
E, A, F, W, N, Q, K, L, B, B1, G, H
30 ms – 60 h✪
6 A
Modular time relay with power CO output contacts
CT36.31
I, P2x 50 ms – 60 h✪
10 A
Modular time relay with 3 twin CO output contactsCT36.32
I, P2x 50 ms – 60 h✪
6 A
*Function diagrams: refer to page 20
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Design
16 A 250 V
16 A 250 V
16A 250V
Railway/01a.12 |
19
Time functions
Delay functions
E
Shot timing modes
On delay
t
A
S
R
S R on
S OFF R off with delay
S
R
S R on with delay (t1)
S OFF R off with delay (t2)
Off delay
t
F
S
R
S R on with delay
S OFF R off
On and off delay
t1
t2
Puls shaping
K
Puls shaping
S
R
S (pulse or continuous contact)
R on for t
S no influence on R and t
Pulse shaping, retrigger (subsequ.time operation from 0)
t
M
S
R
S (pulse or continuous contact)
R on for t
S on for t = t RESET
S
R
S OFF R on for t
S no influence on R and t
Puls shaping
t
Delayed pulse
G
H
S
R
t2
S (pulse or continuous contact)
R after t1 on for t2
S no influence on R and t
On delay single shot
t1
S
R
t2
S R after t1 on for t2
S OFF R off
Special functions
Y
X1
t
S
on for t
OFF
on with delay for t S OFF
off
S
R
S R on
S OFF R off and starts t
S R restart only after t
S
Restart delay
t
t
Stop/Reset
t STOP
S STOP interrupts t
(t-addition)
t RESET
S RESET reset t
t restarts immediately
20 | Railway/01a.12
One shot trailing edge
N
t
S
R
S OFF R on for t
S on for t R off
One shot leading and trailing edge
O
t1
t2
S
R
S R on for t1
S OFF R on for t2
S OFF off for t1 R off
S
R
S R on/off periodically
according to t
S OFF R off
Blinker, pulse start
B
t t t
Blinker, pulse start, trailing pulse
B1
S
R
t t t
S R on/off periodically
according to t
S OFF: last pulse = t
Blinker, interval start
B2
t
S
R
t t
S R after t on/off periodically
according to t
S OFF R off
Repeat cycle timer, pulse start
I
t1 t2 t1
S
R
S R on/off periodically
according to t1 and t2
S OFF R off
Repeat cycle timer, interval start
P
t1 t2 t1
S
R
C55, CT1:
t2 t1
S R after t1 (t2) on/off periodically according to t2 and t1
S OFF R off
Special functions
Star-delta timer
t
t
S R on for t
S OFF R off
(pulse clipping)
Repeat cycle timer
On delay single shot
t1
S
R
Blinker functions
t
L
One shot leading edge
W
T
t is stopped
R on/off
Test
Step-on / Step-off switch
S
S
R
LS
S
R on/off
Step-switching (staircase lighting timer), with time lapse
t
t
S
R
S R on and starts t
S on for t R off
S =Triggering
R = Output circuit
= switches…
ON
OFF
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Multifunction Timer, DIN Rail mounting
CIM1R
Time relay with mechanical change-over output contact
8 time functions + stepping function, ON-OFF switch, 50 ms … 60 h
Type: CIM1R/UC24-240V
Sophisticated multifunction time relay, 1 change-over power contact with zero crossing switching
(50/60 Hz), 8 time functions, stepping function and service function ON/OFF, time ranges:
50 ms … 60 h, multifunction LED state indicator, suitable for any time-control application and also
staircase lighting, Light-switch neon lamp current absorption on input B1, Manual switching function
for maintenance, emergency, etc., 16.6 Hz power supply applications. Railway version available.
Maximum contact load
Recommended minimum contact load
16 A / 250 V AC-1
10 mA / 10 V
Time functions and related connection diagrams (Function diagrams: refer to page 20)
The functions are selectable by rotary switch
LED function table:
NO
Short blinking
OFF
YES
Long blinking
ON
YES
Time data
7 partial time ranges, tmax (rotary switch)
Fine adjustment range (rotary knob)
Time range tolerance Repetition accuracy
Response time, power on, on A1
Min. trigger pulse on B1
Reset time B1 (AC/DC)
Voltage failure buffering (50 / 60 Hz)
0.6, 6, 60 s / 6, 60 min / 6, 60 h
tmin … tmax, 0.5 … 6
tmin: -5 % … +0 % / tmax: -0 % … +5 %
± 0.1 % or DC: 2 ms / AC: 10 ms
≤ 45 ms
20 ms (AC / DC)
≤ 40 ms
≥ 20 ms
Contacts
Type
Rated operational current at 40 °C / 60 °C
Max. inrush current (10 ms)
Max. switching voltage AC-1
Max. AC load AC-1 (Fig.1) Max. DC load DC-1
AgNi / 1 CO, micro disconnection
16 A / 13 A
30 A
250 V
4 kVA
see Fig. 2
Insulation
Test voltage open contact
Test voltage between contacts and control input
General Specifications
Ambient temperature storage / operation
Mechanical life of contact
Conductor cross section
Ingress protection rating
Max. Screw torque
Housing material
Weight
UC 24-240 V (UC = AC/DC)
UC 16.8 … 250 V
approx. 0.5 W
16 … 63 Hz
≤ 0.5 mA
≤ 10 mA
13 / 15 V
107
AC-1
2
106
105
0
2
4
6
8
10
Switching current [A]
12
14
16
Fig. 2 DC load limit curve
20
16
10
DC-1
5
2
1
0.5
0.2
0.1
0
50
100
150
200
Voltage [V]
1 kVrms 1 minute
2.5 kVrms 1 minute
250
300
Dimensions [mm]
-40 … +85 °C / -40 … +70 °C
30 x 106 operations
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP 20
0.4 Nm
Lexan
70 g
Standard types
UC (AC/DC) 15…60 Hz
Fig. 1 AC voltage endurance
CIM1R/UC24-240V
4,2
17,5
5
45
Power supply- and control input
Nominal voltage (A1, B1)
Operating voltage range
Power consumption
Frequency range
Allowed DC residual current into B1
AC Neon lamp residual current into B1
Trigger threshold voltage on B1, AC / DC
Time Relays
NO
ON
TS 35
A1 B1 A2
OFF
Continuous ON
75
A1 B1 A2
OFF
2,5
A1 A2
S
S
Time run
Cycles
B W
S
Relay
Current [A]
E
A K N B1 S LS
Connection diagram
LED
44
20
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
21
Multifunction Timer, DIN Rail mounting
CIM12R
Time relay with AC solid-state output
8 time functions and stepping function, ON-OFF switch, 50 ms … 60 h
Type: CIMR12R/UC24-240V
Sophisticated multifunction time relay, 1 triac output, suitable for high frequency of operations and
inductive loads, 8 time functions, stepping function and service function ON/OFF, time ranges:
50 ms … 60 h, multifunction LED state indicator, suitable for any time-control application and also
staircase lighting, Light-switch neon lamp current absorption on input B1, manual switching function
for maintenance, emergency, etc., 16.6 Hz applications. Railway version available.
Maximum contact load
Minimum contact load 2 A / 250 V
50 mA
Time functions and related connection diagrams (Function diagrams: refer to page 20)
The functions are selectable by rotary switch
LED function table:
A1 B1 A2
Time data
7 partial time ranges, tmax (rotary switch)
Fine adjustment range (rotary knob)
Time range tolerance Repetition accuracy
Response time, power on, on A1
Min. trigger pulse on B1
Reset time B1 (AC/DC)
Voltage failure buffering (50 / 60 Hz)
OFF
NO
Continuous ON
ON
NO
Short blinking
OFF
YES
Long blinking
ON
YES
0.6, 6, 60 s / 6, 60 min / 6, 60 h
tmin … tmax, 0.5 … 6
tmin: -5 % … +0 % / tmax: -0 % … +5 %
± 0.1 % or DC: 2 ms / AC: 10 ms
≤ 45 ms
20 ms (AC / DC)
≤ 40 ms
≥ 20 ms
Output
Type
Rated operational current at 40 °C (Fig.1)
Max. inrush current (10 ms)
Max. switching voltage
Max. AC load AC-1 I2t value
Leakage current
Triac, zero crossing
2A
100 A
250 V
300 VA
78 A2s
< 1 mA
Power supply- and control input
Nominal voltage
Operating voltage range
Power consumption
Frequency range
Allowed DC residual current into B1
AC Neon lamp residual current into B1
Trigger threshold voltage on B1, AC / DC
UC 24-240 V (UC = AC/DC)
UC 16.8 … 250 V
approx. 0.5 W
16 … 63 Hz
≤ 0.5 mA
≤ 10 mA
13 / 15 V
Insulation
Test voltage between output and control input
2.5 kVrms 1 minute
General Specifications
Ambient temperature storage / operation
Conductor cross section
Ingress protection rating
Max. Screw torque
Housing material
Weight
TRIAC
Fig. 1 Output derating curve
2
1
0
0
10
20
30
40
50
Temperature [∞C]
60
70
80
Dimensions [mm]
-40 … +85 °C / -40 … +70 °C
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP 20
0.4 Nm
Lexan
70 g
45
A1 B1 A2
OFF
TS 35
A1 A2
S
S
Time run
75
B W
S
Relay
Current [A]
E
A K N B1 S LS
Connection diagram
LED
UC (AC/DC), 15…60 Hz
CIM12R/UC24-240V
4,2
17,5
2,5
Standard types
5
44
20
Technical approvals, conformities
See table on page 53.
22 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Multifunction Timer, DIN Rail mounting
CIM13R
Time relay with DC solid-state output
8 time functions and stepping function, ON-OFF switch, 50 ms … 60 h
Type: CIM13R/UC24-240V
Sophisticated multifunction time relay, 1 transistor output, 8 time functions, stepping function and
service function ON/OFF, time ranges from 50 ms … 60 h, multifunction LED state indicator, suitable
for any time-control application and also staircase-light control, light-switch neon lamp current
absorption on input B1, manual switching function for maintenance, emergency, etc., 16.6 Hz
applications. Railway version available.
Maximum contact load
Recommended minimum contact load 5 A / 30 V
1 mA
Time functions and related connection diagrams (Function diagrams: refer to page 20)
The functions are selectable by rotary switch
LED function table:
NO
ON
NO
Short blinking
OFF
YES
Long blinking
ON
YES
0.6, 6, 60 s / 6, 60 min / 6, 60 h
tmin … tmax, 0.5 … 6
tmin: -5 % … +0 % / tmax: -0 % … +5 %
± 0.1 % or DC: 2 ms / AC: 10 ms
≤ 45 ms
20 ms (AC / DC)
≤ 40 ms
≥ 20 ms
Output
Type
Rated operational current at 40 °C (Fig.1)
Max. inrush current (10 µs)
Max. switching voltage
Leakage current
MOS FET
5A
40 A
30 V
< 10 µA
Power supply- and control input
Nominal voltage (UC = AC / DC)
Operating voltage range
Power consumption
Frequency range
Allowed DC residual current into B1
AC Neon lamp residual current into B1
Trigger threshold voltage on B1, AC / DC
UC 24-240 V (UC = AC/DC)
UC 16.8 … 250 V
approx. 0.5 W
16 … 63 Hz
≤ 0.5 mA
≤ 10 mA
13 / 15 V
Insulation
Test voltage between output and control input
2.5 kVrms 1 minute
General Specifications
Ambient temperature storage / operation
Conductor cross section
Ingress protection rating
Max. Screw torque
Housing material
Weight
-40 … +85 °C / -40 … +70 °C
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP 20
0.4 Nm
Lexan
70 g
MOSFET
Fig. 1 Output derating curve
6
2
5
4
3
2
1
0
0
10
30
40
50
Temperature [∞C]
60
70
80
Dimensions [mm]
Standard types
UC (AC/DC), 15…60 Hz
20
75
Time data
7 partial time ranges, tmax (rotary switch)
Fine adjustment range (rotary knob)
Time range tolerance Repetition accuracy
Response time, power on, on A1
Min. trigger pulse on B1
Reset time B1 (AC/DC)
Voltage failure buffering (50 / 60 Hz)
Time Relays
A1 B1 A2
OFF
Continuous ON
45
A1 B1 A2
OFF
TS 35
A1 A2
S
S
Time run
CIM13R/UC24-240V
4,2
17,5
2,5
B W
S
Relay
Current [A]
E
A K N B1 S LS
Connection diagram
LED
5
44
20
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
23
Multifunction Timer, DIN Rail mounting
CIM2R
Time relay with mechanical change-over output contact
7 time functions and 7 time ranges from 50 ms … 60 h
Type: CIM2R/UC24-240V
Sophisticated multifunction time relay, 1 change-over power contact switching in zero crossing
(50/60 Hz), 7 time functions and service function ON/OFF, 7 time ranges from 50 ms to 60 h,
multifunction LED state indicator, suitable for any time-control application, light-switch neon lamp
current absorption on input B1, manual switching function for maintenance, emergency, etc.,
16.6 Hz power supply applications. Railway version available.
Maximum contact load
Recommended minimum contact load
16 A / 250 V AC-1
10 mA / 10 V
Time functions and related connection diagrams (Function diagrams: refer to page 20)
The functions are selectable by rotary switch
LED function table:
OFF
NO
Continuous ON
ON
NO
Short blinking
OFF
YES
Long blinking
ON
YES
Time data
7 partial time ranges, tmax (rotary switch)
Fine adjustment range (rotary knob)
Time range tolerance Repetition accuracy
Response time, power on, on A1
Min. trigger pulse on B1
Reset time B1 (AC/DC)
Voltage failure buffering (50 / 60 Hz)
0.6, 6, 60 s / 6, 60 min / 6, 60 h
tmin … tmax, 0.5 … 6
tmin: -5 % … +0 % / tmax: -0 % … +5 %
± 0.1 % or DC: 2 ms / AC: 10 ms
≤ 45 ms
20 ms (AC / DC)
≤ 40 ms
≥ 20 ms
Contacts
Type
Rated operational current at 40 °C / 60 °C
Max. inrush current (10 ms)
Max. switching voltage AC-1
Max. AC load AC-1 (Fig.1) Max. DC load DC-1
AgNi / 1 CO, micro disconnection
16 A / 13 A
30 A
250 V
4 kVA
see Fig. 2
Power supply- and control input
Nominal voltage (A1, B1)
Operating voltage range
Power consumption
Frequency range
Allowed DC residual current into B1
AC Neon lamp residual current into B1
Trigger threshold voltage on B1, AC / DC
Insulation
Test voltage open contact
Test voltage between contacts and control input
General Specifications
Ambient temperature storage / operation
Mechanical life of contact
Conductor cross section
Ingress protection rating
Max. Screw torque
Housing material
Weight
UC 24-240 V (UC = AC / DC)
UC 16.8 … 250 V
approx. 0.5 W
16 … 63 Hz
≤ 0.5 mA
≤ 10 mA
13 / 15 V
Fig. 1 AC voltage endurance
107
AC-1
106
105
0
2
4
6
8
10
Switching current [A]
12
14
16
Fig. 2 DC load limit curve
20
16
10
DC-1
5
2
1
0.5
0.2
0.1
0
50
100
150
200
Voltage [V]
1 kVrms 1 minute
2.5 kVrms 1 minute
250
300
Dimensions [mm]
-40 … +85 °C / -40 … +70 °C
30 x 106 operations
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP 20
0.4 Nm
Lexan
70 g
45
A1 B1 A2
OFF
TS 35
A1 B1 A2
S
75
A1 A2
S
Time run
Cycles
B2 H
S
Relay
Current [A]
E
A L M G
Connection diagram
LED
UC (AC/DC) 15…60 Hz
CIM2R/UC24-240V
4,2
17,5
2,5
Standard types
5
44
20
Technical approvals, conformities
See table on page 53.
24 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Multifunction Timer, DIN Rail mounting
CIM22R
Time relay with AC solid-state output
7 time functions and 7 time ranges 50 ms … 60 h
Type: CIM22R/UC24-240V
Sophisticated multifunction time relay, 1 triac output, suitable for high frequency of operations and
inductive loads, 7 time functions and service function ON/OFF, 7 time ranges from 50 ms … 60 h,
multifunction LED state indicator, suitable for any time-control application light-switch neon lamp
current absorption on input B1, manual switching function for maintenance, emergency, etc.,
16.6 Hz applications. Railway version available.
Maximum contact load
Minimum contact load 2 A / 250 V
50 mA
Time functions and related connection diagrams (Function diagrams: refer to page 20)
The functions are selectable by rotary switch
LED function table:
Time data
7 partial time ranges, tmax (rotary switch)
Fine adjustment range (rotary knob)
Time range tolerance Repetition accuracy
Response time, power on, on A1
Min. trigger pulse on B1
Reset time B1 (AC/DC)
Voltage failure buffering (50 / 60 Hz)
OFF
NO
Continuous ON
ON
NO
Short blinking
OFF
YES
Long blinking
ON
YES
0.6, 6, 60 s / 6, 60 min / 6, 60 h
tmin … tmax, 0.5 … 6
tmin: -5 % … +0 % / tmax: -0 % … +5 %
± 0.1 % or DC: 2 ms / AC: 10 ms
≤ 45 ms
20 ms (AC / DC)
≤ 40 ms
≥ 20 ms
Output
Type
Rated operational current at 40 °C (Fig.1)
Max. inrush current (10 ms)
Max. switching voltage
Max. AC load AC-1 I2t value
Leakage current
Triac, zero crossing
2A
100 A
250 V
300 VA
78 A2s
< 1 mA
Power supply- and control input
Nominal voltage
Operating voltage range
Power consumption
Frequency range
Allowed DC residual current into B1
AC Neon lamp residual current into B1
Trigger threshold voltage on B1, AC / DC
UC 24-240 V (UC = AC / DC)
UC 16.8 … 250 V
approx. 0.5 W
16 … 63 Hz
≤ 0.5 mA
≤ 10 mA
13 / 15 V
Insulation
Test voltage between output and control input
2.5 kVrms 1 minute
General Specifications
Ambient temperature storage / operation
Conductor cross section
Ingress protection rating
Max. Screw torque
Housing material
Weight
Time Relays
A1 B1 A2
OFF
TRIAC
Fig. 1 Output derating curve
2
2
1
0
0
10
20
30
40
50
Temperature [∞C]
60
70
80
Dimensions [mm]
-40 … +85 °C / -40 … +70 °C
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP 20
0.4 Nm
Lexan
70 g
45
A1 B1 A2
S
TS 35
A1 A2
S
Time run
75
B2 H
S
Relay
Current [A]
E
A L M G
Connection diagram
LED
UC (AC/DC), 15…60 Hz
CIM22R/UC24-240V
4,2
17,5
2,5
Standard types
5
44
20
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
25
Multifunction Timer, DIN Rail mounting
CIM23R
Time relay with DC solid-state output
7 time functions and 7 time ranges from 50 ms … 60 h
Type: CIM23R/UC24-240V
Sophisticated multifunction time relay, 1 transistor output, 7 time functions and service function
ON/OFF, 7 time ranges from 50 ms … 60 h, multifunction LED state indicator suitable for any
time-control application, light-switch neon lamp current absorption on input B1, manual switching
function for maintenance, emergency, etc., 16.6 Hz applications. Railway version available.
Maximum contact load
Recommended minimum contact load 5 A / 30 V
1 mA
Time functions and related connection diagrams (Function diagrams: refer to page 20)
The functions are selectable by rotary switch
LED function table:
A1 B1 A2
Time data
7 partial time ranges, tmax (rotary switch)
Fine adjustment range (rotary knob)
Time range tolerance Repetition accuracy
Response time, power on, on A1
Min. trigger pulse on B1
Reset time B1 (AC/DC)
Voltage failure buffering (50 / 60 Hz)
NO
Continuous ON
ON
NO
Short blinking
OFF
YES
Long blinking
ON
YES
Connection diagram
MOSFET
0.6, 6, 60 s / 6, 60 min / 6, 60 h
tmin … tmax, 0.5 … 6
tmin: -5 % … +0 % / tmax: -0 % … +5 %
± 0.1 % or DC: 2 ms / AC: 10 ms
≤ 45 ms
20 ms (AC / DC)
≤ 40 ms
≥ 20 ms
Output
Type
Rated operational current at 40 °C (Fig.1))
Max. inrush current (10 µs)
Max. switching voltage
Leakage current
MOS FET
5A
40 A
30 V
< 10 µA
Power supply- and control input
Nominal voltage (UC = AC / DC)
Operating voltage range
Power consumption
Frequency range
Allowed DC residual current into B1
AC Neon lamp residual current into B1
Trigger threshold voltage on B1, AC / DC
UC 24-240 V (UC = AC / DC)
UC 16.8 … 250 V
approx. 0.5 W
16 … 63 Hz
≤ 0.5 mA
≤ 10 mA
13 / 15 V
Insulation
Test voltage between output and control input
2.5 kVrms 1 minute
General Specifications
Ambient temperature storage / operation
Conductor cross section
Ingress protection rating
Max. Screw torque
Housing material
Weight
-40 … +85 °C / -40 … +70 °C
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP 20
0.4 Nm
Lexan
70 g
Fig. 1 Output derating curve
6
5
4
3
2
1
0
0
10
30
40
50
Temperature [∞C]
60
70
80
Dimensions [mm]
75
Standard types
UC (AC/DC), 15…60 Hz
20
CIM23R/UC24-240V
4,2
17,5
5
45
S
A1 B1 A2
Time run
OFF
TS 35
B2 H
A1 A2
S
Relay
OFF
2,5
A L M G
S
LED
Current [A]
E
44
20
Technical approvals, conformities
See table on page 53.
26 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Multifunction Timer, DIN Rail mounting
CIM3R
Time relay with mechanical change-over output contact
6 time functions and service function, 7 time ranges from 50 ms…60 h
Type: CIM3R/UC24-240V
Sophisticated multifunction time relay, 1 change-over power contact switching in zero crossing
(50/60 Hz), 6 time functions and service function ON/OFF, 7 time ranges from 50 ms to 60 h,
multifunction LED state indicator, suitable for any time-control application, light-switch neon lamp
current absorption on input B1, manual switching function for maintenance, emergency, etc.,
16.6 Hz power supply applications. Railway version available.
Maximum contact load
Recommended minimum contact load
16 A / 250 V AC-1
10 mA / 10 V
Time functions and related connection diagrams (Function diagrams: refer to page 20)
The functions are selectable by rotary switch
LED function table:
NO
ON
NO
Short blinking
OFF
YES
Long blinking
ON
YES
Time data
7 partial time ranges, tmax (rotary switch)
Fine adjustment range (rotary knob)
Time range tolerance
Repetition accuracy
Response time, power on, on A1
Min. trigger pulse on B1
Reset time B1 (AC/DC)
Voltage failure buffering (50 / 60 Hz)
0.6, 6, 60 s / 6, 60 min / 6, 60 h
tmin … tmax, 0.5 … 6
tmin: -5 % … +0 % / tmax: -0 % … +5 %
± 0.1 % or DC: 2 ms / AC: 10 ms
≤ 45 ms
20 ms (AC / DC)
≤ 40 ms
≥ 20 ms
Contacts
Type
Rated operational current at 40 °C / 60 °C
Max. inrush current (10 ms)
Max. switching voltage AC-1
Max. AC load AC-1 (Fig.1)
Max. DC load DC-1
AgNi / 1 CO, micro disconnection
16 A / 13 A
30 A
250 V
4 kVA
see Fig. 2
Insulation
Test voltage open contact
Test voltage between contacts and control input
General Specifications
Ambient temperature storage / operation
Mechanical life of contact
Conductor cross section
Ingress protection rating
Max. Screw torque
Housing material
Weight
UC 24-240 V (UC = AC / DC)
UC 16.8 … 250 V
approx. 0.5 W
16 … 63 Hz
≤ 0.5 mA
≤ 10 mA
13 / 15 V
Fig. 1 AC voltage endurance
107
AC-1
2
106
105
0
2
4
6
8
10
Switching current [A]
12
14
16
Fig. 2 DC load limit curve
20
16
10
DC-1
5
2
1
0.5
0.2
0.1
0
50
100
150
200
Voltage [V]
1 kVrms 1 minute
2.5 kVrms 1 minute
250
300
Dimensions [mm]
-40 … +85 °C / -40 … +70 °C
30 x 106 operations
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP 20
0.4 Nm
Lexan
70 g
45
Power supply- and control input
Nominal voltage (A1, B1)
Operating voltage range
Power consumption
Frequency range
Allowed DC residual current into B1
AC Neon lamp residual current into B1
Trigger threshold voltage on B1, AC / DC
Time Relays
OFF
Continuous ON
TS 35
A1 B1 A2
OFF
75
A1 B1 A2
S
Time run
Cycles
S
Relay
Current [A]
F Q G
H I P
Connection diagram
LED
UC (AC/DC) 15…60 Hz
CIM3R/UC24-240V
4,2
17,5
2,5
Standard types
5
44
20
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
27
Multifunction Timer, DIN Rail mounting
CIM32R
Time relay with AC solid-state output
6 time functions and service function, 7 time ranges from 50 ms…60 h
Type: CIM32R/UC24-240V
Sophisticated multifunction time relay, 1 triac output, suitable for high frequency of operations and
inductive loads, 6 time functions and service function ON/OFF, 7 time ranges from 50 ms … 60 h,
multifunction LED state indicator, suitable for any time-control application light-switch neon lamp
current absorption on input B1, manual switching function for maintenance, emergency, etc.,
16.6 Hz applications. Railway version available.
Maximum contact load
Minimum contact load 2 A / 250 V
50 mA
Time functions and related connection diagrams (Function diagrams: refer to page 20)
The functions are selectable by rotary switch
Connection diagram
F Q G
H I P
S
A1 B1 A2
S
A1 B1 A2
LED
Relay
Time run
OFF
OFF
NO
Continuous ON
ON
NO
Short blinking
OFF
YES
Long blinking
ON
YES
Time data
7 partial time ranges, tmax (rotary switch)
Fine adjustment range (rotary knob)
Time range tolerance
Repetition accuracy
Response time, power on, on A1
Min. trigger pulse on B1
Reset time B1 (AC/DC)
Voltage failure buffering (50 / 60 Hz)
0.6, 6, 60 s / 6, 60 min / 6, 60 h
tmin … tmax, 0.5 … 6
tmin: -5 % … +0 % / tmax: -0 % … +5 %
± 0.1 % or DC: 2 ms / AC: 10 ms
≤ 45 ms
20 ms (AC / DC)
≤ 40 ms
≥ 20 ms
Output
Type
Rated operational current at 40 °C (Fig.1)
Max. inrush current (10 ms)
Max. switching voltage
Max. AC load AC-1 I2t value
Leakage current
Triac, zero crossing
2A
100 A
250 V
300 VA
78 A2s
< 1 mA
Power supply- and control input
Nominal voltage
Operating voltage range
Power consumption
Frequency range
Allowed DC residual current into B1
AC Neon lamp residual current into B1
Trigger threshold voltage on B1, AC / DC
UC 24-240 V (UC = AC / DC)
UC 16.8 … 250 V
approx. 0.5 W
16 … 63 Hz
≤ 0.5 mA
≤ 10 mA
13 / 15 V
Insulation
Test voltage between output and control input
2.5 kVrms 1 minute
TRIAC
Fig. 1 Output derating curve
2
Current [A]
LED function table:
1
0
0
10
20
30
40
50
Temperature [∞C]
60
70
80
45
75
-40 … +85 °C / -40 … +70 °C
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP 20
0.4 Nm
Lexan
70 g
TS 35
Dimensions [mm]
General Specifications
Ambient temperature storage / operation
Conductor cross section
Ingress protection rating
Max. Screw torque
Housing material
Weight
UC (AC/DC), 15…60 Hz
CIM32R/UC24-240V
4,2
17,5
2,5
Standard types
5
44
20
Technical approvals, conformities
See table on page 53.
28 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Multifunction Timer, DIN Rail mounting
CIM33R
Time relay with DC solid-state output
6 time functions and service function, 7 time ranges from 50 ms…60 h
Type: CIM33/UC24-240V
Sophisticated multifunction time relay, 1 transistor output, 6 time functions and service function
ON/OFF, 7 time ranges from 50 ms … 60 h, Multifunction LED state indicator, suitable for any
time-control application, light-switch neon lamp current absorption on input B1, manual switching
function for maintenance emergency, etc., 16.6 Hz applications. Railway version available.
Maximum contact load
Recommended minimum contact load
5 A / 30 V
1 mA
Time functions and related connection diagrams (Function diagrams: refer to page 20)
The functions are selectable by rotary switch
LED function table:
Continuous ON
ON
NO
Short blinking
OFF
YES
Long blinking
ON
YES
Connection diagram
MOSFET
0.6, 6, 60 s / 6, 60 min / 6, 60 h
tmin … tmax, 0.5 … 6
tmin: -5 % … +0 % / tmax: -0 % … +5 %
± 0.1 % or DC: 2 ms / AC: 10 ms
≤ 45 ms
20 ms (AC / DC)
≤ 40 ms
≥ 20 ms
Output
Type
Rated operational current at 40 °C (Fig.1)
Max. inrush current (10 µs)
Max. switching voltage
Leakage current
MOS FET
5A
40 A
30 V
< 10 µA
Power supply- and control input
Nominal voltage
Operating voltage range
Power consumption
Frequency range
Allowed DC residual current into B1
AC Neon lamp residual current into B1
Trigger threshold voltage on B1, AC / DC
UC 24-240 V (UC = AC / DC)
UC 16.8 … 250 V
approx. 0.5 W
16 … 63 Hz
≤ 0.5 mA
≤ 10 mA
13 / 15 V
Insulation
Test voltage between output and control input
2.5 kVrms 1 minute
General Specifications
Ambient temperature storage / operation
Conductor cross section
Ingress protection rating
Max. Screw torque
Housing material
Weight
-40 … +85 °C / -40 … +70 °C
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP 20
0.4 Nm
Lexan
70 g
Fig. 1 Output derating curve
6
2
5
4
3
2
1
0
0
10
20
30
40
50
Temperature [∞C]
60
70
80
Dimensions [mm]
75
Standard types
UC (AC/DC), 15…60 Hz
Time Relays
Time data
7 partial time ranges, tmax (rotary switch)
Fine adjustment range (rotary knob)
Time range tolerance Repetition accuracy
Response time, power on, on A1
Min. trigger pulse on B1
Reset time B1 (AC/DC)
Voltage failure buffering (50 / 60 Hz)
NO
CIM33R/UC24-240V
4,2
17,5
5
45
A1 B1 A2
Time run
OFF
TS 35
S
A1 B1 A2
Relay
OFF
2,5
H I P
S
LED
Current [A]
F Q G
44
20
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
29
CT-System
Plug-in timer modules
(to combine with industrial relays)
CT32R, CT33R, CT36R
Type CT32R, CT33R, CT36R, /…V
Plug-in time modules for sockets with module slot in combination with plug-in relays.
Power supply and control voltages 24 … 240 V. Time ranges 30 ms up to 60 h.
LED output state indicator.
Time functions and related connection diagrams (Function diagrams: refer to page 20)
CT32R (Universal)
CT33R (Universal)
CT36R (Repeat cycle timer)
Time data
Type
CT32RCT33RCT36R
Partial time ranges, tmax 1.5, 6, 15, 60 /s /min
150, 600 ms
2 x 600 ms
1.5, 6, 15, 60 /s /min /h 2 x 6, 60 /s /min /h
Min. time tmin
0.15 s
30 ms
2 x 50 ms
Fine adj. range tmin …
1 … 1 0
0.2 … 1
2 x 5 … 60
Time range tolerance
-25 … 0 %
-25 … 0 %
-25 … 0 %
0 … 25 %
0 … 25 %
0 … 25 %
Repetition accuracy
± 0.2 % or 20 ms
± 0.2 % or 20 ms
± 0.2 % or 20 ms
Temperature drift of time
0.1 % / K
0.1 % / K
0.1 % / K
Min. trigger pulse width B1
≥ 30 ms
≥ 30 ms
–
Reset time pow. supply
≤ 150 ms
≤ 150 ms
≤ 150 ms
Voltage failure buffering
≥ 20 ms
≥ 20 ms
≥ 20 ms
Output data
Nominal voltage Type
Rated operational current
On-state resistance
Leakage current
UC 24–48 V
Solid state
150 mA
≤ 25 Ω
≤ 150 µA
Power supply and control input (UC = AC/ DC)
Type
Nominal voltage
Operating voltage range
Input B1 inactive
Supply current CT32RCT33RCT36R
UC 24 – 48 V
UC 24 – 48 V
UC 24 – 48 V
16.8 … 60 V
16.8 … 60 V
16.8 … 60 V
≤ 9 V
≤ 9 V
–
5 … 11 mA
5 … 11 mA
6 … 12 mA
General Specification
Ambient temperature storage / operation
Ingress protection rating
Housing material
Weight
-40 … +85 °C / -40 … +70 °C
IP 40 when plugged in
Lexan
25 g
Standard types
CT32R/UC24-48V
CT33R/UC24-48V
CT36R/UC24-48V
Dimensions [mm]
Remark:This module is part of several ready for connection units consisting of
socket, relay and module. A wide range of suitable relays are available.
16
75
4
38
4
20
54
Technical approvals, conformities
See table on page 53.
30 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Power Relay
Plug-in timer set
CT-System
Control Relay
CT32.31R, CT33.31R, CT36.31R
CT32.32R, CT33.32R, CT36.32R
Timer Delay Relay-Set
Relay, Module and Socket
Set delivery includes:
•Relay
•Module
•Front cover
•Socket
•Retaining clip
Relay data:
See page 4/5
C31D/R
C32D/R
Universal Power Relay 10A
10A 250VA
6A 250VA
MIN
50mA 10V
10mA 5V
9 8 7 5 3 4
R
R
S
+
CT32R Universal-Timer
7 functions, voltage controlled, time
lapse display, blinking.
Seismic approved.
Function /Triggering
0,15 s-60 min H
0,15-1,5s…
6-60min
ANKB1
W B
CT33R Universal-Timer
12 functions, voltage controlled, time
lapse display, blinking, high setting
accuracy by dial graduation 1:5.
Timer Range
Function /Triggering
W H B
E
A N L F K G B1 Q
t 2 = t1
G H
t 2 = 0,5s
30ms-60 h H
30-150ms…
12-60 h
CT36R Universal-Taktgeber
Pulse or pause start.
t1/ t2 separately settable.
Time lapse display t1/ t2.
Function /Triggering
2 x 50ms-60 h H
2x50-600ms…
5-60h
+
Set Order-Nr.:
Set Order-Nr.:
CT32.31R/…V
CT32.32R/…V
Delivery includes:
• Relay C32D/R DC…V
• Module CT32R/UC24-48V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
Set Order-Nr.:
Set Order-Nr.:
CT33.31R/…V
CT33.32R/…V
DC 24, 36V
DC 24, 36V
Delivery includes:
• Relay C31D/R DC…V
• Module CT33R/UC24-48V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
Delivery includes:
• Relay C32D/R DC…V
• Module CT33R/UC24-48V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
Set Order-Nr.:
Set Order-Nr.:
CT36.31R/…V
CT36.32R/…V
Delivery includes:
• Relay C31D/R DC…V
• Module CT36R/UC24-48V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
2
DC 24, 36V
Delivery includes:
• Relay C31D/R DC…V
• Module CT32R/UC24-48V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
DC 24, 36V
Timer Range
A2 35 25 15 B1 A1
10 11 6 1 12 2
+
+
DC 24, 36V
Timer Range
E
S
A2 35 25 15 B1 A1
10 11 6 1 12 2
TIMER-MODUL
A2 A1 A2 B1 A1 A2 B1 A1
+
I P
38 36 28 26 18 16
Triggering
S
F Q
38 36 28 26 18 16
TIMER-MODUL
Timer-Modul
Function (see page 30)
The control relay with highest
switching reliablility for control
and signal circuits ranging from
10mA 5V.
MAX
9 8 7 5 3 4
E
Relay with
3 twin contacts 6A
Time Relays
Relay data’s see:
Relay C31; C32
with 3 power change-overcontacts this is the robust relay
for AC and DC circuits ranging
from 50mA 10V.
DC 24, 36V
Delivery includes:
• Relay C32D/R DC…V
• Module CT36R/UC24-48V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
Dimensions [mm]
See page 30.
Technical approvals,
conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
31
Notes
32 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Application
Types
Monitoring Voltage monitoring, AC / DC single phase
MRU11R
0 … AC 480 V / DC 690 V
Voltage monitoring, AC / DC three phase
MRU32R
0 … AC 480 V / DC 690 V
Current monitoring, AC / DC single phase
MRI11R
0 … 5 A
Current monitoring, AC / DC three phase
MRI32R
0 … 5 A
Multifunction monitoring, AC / DC single phase
MRM11R
U, I, P, f, cosφ
Multifunction monitoring, AC / DC three phase
MRM32R
U, I, P, f, cosφ
DC Voltage monitoring
CT524.31R
0 … 30 V
DC Voltage monitoring
CT524.32R
0 … 30 V
DC Current monitoring
CT512.31R
0 … 200 mA
DC Current monitoring
CT512.32R
0 … 200 mA
DC Current monitoring
CT515.31R
0 … 2 A
DC Current monitoring
CT515.32R
0 … 2 A
DC Current monitoring
CT516.31R
0 … 6 A
DC Current monitoring
CT516.32R
0 … 6 A
Isolation monitoring, DC networks
ESU-D2
1 … 50 kΩ
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Monitoring range
Output contacts
Design
3
50 mm
Railway/01a.12 |
Monitoring Relays
3. Monitoring Relays
33
1-phase monitoring
MRU11R
Voltage monitoring relay AC/DC, single phase
DIN Rail mounting according to DIN 43 880
Type: MRU11R/…V
Voltage monitoring relay with over- and under voltage thresholds up to 690 V.
Alarm delay setting. Alarm LED. Display for voltmeter function, alarm signal
and interactive parameter setting.
1 change-over alarm contact 6 A 250 V. Comfortable parameter setting.
Monitoring function
LIMIT 1
HYST 1
LIMIT 1
HYST
INPUT
INPUT
HYST
LIMIT2
HYST
LIMIT1
AL
AL
t OFF
ok
ok
ye
fail
t OFF
ok
al
rd
alarm
t ON
t OFF
ok
al
Alarm delay:
AL
t ON
t OFF
Connection diagram
N
ok
al
L
U– U–
al
t OFF, t ON
LOAD
t ON
Measuring circuit data
Over/under voltage setting ranges AC / DC
Frequency
Resolution
Accuracy
Input resistance
0 … 480 V / 0 … 690 V
DC, AC 16 … 100 Hz
100 mV
2 % ±1 digit
1 MΩ
Time data
Alarm delay setting time
Reset time setting range
Voltage failure buffering
0.1 … 999.9 s
0.1 … 999.9 s
ca. 30 ms
Contacts
Type / Material
Rated operational current
Max. inrush current
Max. switching voltage
Max. AC load AC-1 (Fig.1) Max. DC load DC-1, 24 V / 220 V (Fig.2)
Recommended min. contact load
1 CO / AgNi 0.15
6A
15 A
250 V
1250 VA
120 W / 25 W
10 mA / 10 V
Power supply
Nominal voltage AC/DC
Operating voltage range
AC frequency
Power consumption
UC12-48V
12 … 48 V
10 … 57 V
16 … 63 Hz
2 W / 3 VA
U+
AL
15 16 18
A1 A2
Fig. 1 AC voltage enduranc
Cycles
107
AC-1
106
105
0
1
2
3
4
Switching current [A]
5
6
Fig. 2 DC load limit curve
10
DC-1
6
5
UC110-240V
110 … 240 V
85 … 250 V
16 … 63 Hz
2 W / 3 VA
Current [A]
t ON
gn
INPUT
2
1
0.5
0.3
Insulation
Test voltage open - contact
Test voltage measuring input - contacts
Test voltage measuring input - power supply
0.2
1 kVrms 1 minute
4 kVrms 1 minute
4 kVrms 1 minute
0.1
0
50
100
150
200
Voltage [V]
250
300
Dimensions [mm]
General specifications
Ambient temperature storage /operation
Mechanical life of contacts
Conductor cross section
Ingress protection rating
Max. screw torque
Housing material
Weight
-40 … +85 °C / -25 … +60 °C
30 x 106 operations
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP20
0.4 Nm
Lexan EXL 9330
130 g
Standard types
AC/DC 12-48 V, 15…60 Hz
AC/DC 110-240 V, 15…60 Hz
MRU11R/UC12-48V
MRU11R/UC110-240V
Technical approvals, conformities
See table on page 53.
34 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
3-phase monitoring
MRU32R
Voltage monitoring relay AC/DC, three phase
DIN Rail mounting according to DIN 43 880
Type: MRU32R/…V
Voltage monitoring relay with over- and under voltage thresholds up to 690 V.
Alarm delay setting. Alarm LED. Display for voltmeter function, alarm signal
and interactive parameter setting.
2 change-over alarm contacts 6 A 250 V. Comfortable parameter setting.
Monitoring function
LIMIT 1
HYST 1
LIMIT 1
HYST
AL
AL
t ON
t OFF
ok
ok
ye
fail
t OFF
ok
al
rd
alarm
t ON
t OFF
ok
al
Alarm delay:
AL
t ON
t OFF
Connection diagram
N L1 L2 L3
ok
al
al
t OFF, t ON
LOAD
t ON
gn
INPUT
U– U–
U1+
U2+
U3+
AL1
AL2
15 16 18 25 26 28
0 … 480 V / 0 … 690 V
DC, AC 16 … 100 Hz
100 mV
2 % ±1 digit
1 MΩ
Time data
Alarm delay setting time
Reset time setting range
Voltage failure buffering
0.1 … 999.9 s
0.1 … 999.9 s
ca. 30 ms
Contacts
Type / Material
Rated operational current
Max. inrush current
Max. switching voltage
Max. AC load AC-1 (Fig.1) Max. DC load DC-1, 24 V / 220 V (Fig.2)
Recommended min. contact load
2 CO / AgNi 0.15
6A
15 A
250 V
1250 VA
120 W / 25 W
10 mA / 10 V
Power supply
Nominal voltage AC/DC
Operating voltage range
AC frequency
Power consumption
UC12-48V
12 … 48 V
10 … 57 V
16 … 63 Hz
2 W / 3 VA
A1 A2
Fig. 1 AC voltage enduranc
107
Cycles
Measuring circuit data
Over/under voltage setting ranges AC / DC
Frequency
Resolution
Accuracy
Input resistance
AC-1
106
105
0
1
2
3
4
Switching current [A]
5
6
Fig. 2 DC load limit curve
10
DC-1
Current [A]
6
5
UC110-240V
110 … 240 V
85 … 250 V
16 … 63 Hz
2 W / 3 VA
3
2
1
0.5
0.3
0.2
Insulation
Test voltage open - contact
Test voltage between poles
Test voltage measuring input - contacts
Test voltage measuring input - power supply
1 kVrms 1 minute
2.5 kVrms 1 minute
4 kVrms 1 minute
4 kVrms 1 minute
General specifications
Ambient temperature storage /operation
Mechanical life of contacts
Conductor cross section
Ingress protection rating
Max. screw torque
Housing material
Weight
-40 … +85 °C / -25 … +60 °C
30 x 106 operations
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP20
0.4 Nm
Lexan EXL 9330
130 g
0.1
0
50
100
150
200
Voltage [V]
250
300
Dimensions [mm]
Standard types
AC/DC 12-48 V, 15…60 Hz
AC/DC 110-240 V, 15…60 Hz
MRU32R/UC12-48V
MRU32R/UC110-240V
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Monitoring Relays
HYST
LIMIT1
LOAD
INPUT
HYST
LIMIT2
LOAD
INPUT
Railway/01a.12 |
35
1-phase monitoring
MRI11R
Current monitoring relay AC/DC, single phase
DIN Rail mounting according to DIN 43 880
Type: MRI11R/…V
Current monitoring relay with over- and under voltage thresholds up to 5 A.
Alarm delay setting. Alarm LED. Display for voltmeter function, alarm signal
and interactive parameter setting.
1 change-over alarm contact 6 A 250 V. Comfortable parameter setting.
Monitoring function
LIMIT 1
HYST 1
LIMIT 1
HYST
INPUT
INPUT
HYST
LIMIT2
HYST
LIMIT1
AL
AL
t ON
t OFF
ok
ok
ye
fail
t OFF
ok
al
rd
alarm
t ON
t OFF
ok
al
Alarm delay:
AL
t ON
t OFF
Connection diagram
N
ok
al
L
I– I+
al
t OFF, t ON
LOAD
t ON
gn
INPUT
AL
15 16 18
0…5A
DC, AC 16 … 100 Hz
100 mA
2 % ±1 digit
5 mΩ
Time data
Alarm delay setting time
Reset time setting range
Voltage failure buffering
0.1 … 999.9 s
0.1 … 999.9 s
ca. 30 ms
Contacts
Type / Material
Rated operational current
Max. inrush current
Max. switching voltage
Max. AC load AC-1 (Fig.1)
Max. DC load DC-1, 24 V / 220 V (Fig.2)
Recommended min. contact load
1 CO / AgNi 0.15
6A
15 A
250 V
1250 VA
120 W / 25 W
10 mA / 10 V
Power supply
Nominal voltage AC/DC
Operating voltage range
AC frequency
Power consumption
UC12-48V
12 … 48 V
10 … 57 V
16 … 63 Hz
2 W / 3 VA
A1 A2
Fig. 1 AC voltage enduranc
107
Cycles
Measuring circuit data
Over/under current setting ranges AC / DC
Frequency
Resolution
Accuracy
Input resistance
AC-1
106
105
0
1
2
3
4
Switching current [A]
5
6
Fig. 2 DC load limit curve
10
DC-1
UC110-240V
110 … 240 V
85 … 250 V
16 … 63 Hz
2 W / 3 VA
Current [A]
6
5
2
1
0.5
0.3
0.2
Insulation
Test voltage open - contact
Test voltage measuring input - contacts
Test voltage measuring input - power supply
1 kVrms 1 minute
4 kVrms 1 minute
4 kVrms 1 minute
General specifications
Ambient temperature storage /operation
Mechanical life of contacts
Conductor cross section
Ingress protection rating
Max. screw torque
Housing material
Weight
-40 … +85 °C / -25 … +60 °C
30 x 106 operations
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP20
0.4 Nm
Lexan EXL 9330
130 g
0.1
0
50
100
150
200
Voltage [V]
250
300
Dimensions [mm]
Standard types
UC 12-48 V (AC/DC), 15…60 Hz
UC 110-240 V (AC/DC), 15…60 Hz
MRI11R/UC12-48V
MRI11R/UC110-240V
Technical approvals, conformities
See table on page 53.
36 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
3-phase monitoring
MRI32R
Current monitoring relay AC/DC, three phase
DIN Rail mounting according to DIN 43 880
Type: MRI32R/…V
Current monitoring relay with over- and under current thresholds up to 5 A.
Alarm delay setting. Alarm LED. Display for voltmeter function, alarm signal
and interactive parameter setting.
2 change-over alarm contacts 6 A 250 V. Comfortable parameter setting.
Monitoring function
LIMIT 1
HYST 1
LIMIT 1
HYST
AL
t ON
t OFF
ok
gn
ok
ye
fail
t OFF
ok
al
rd
alarm
t ON
t OFF
ok
al
Alarm delay:
AL
t ON
t OFF
Connection diagram
N L1 L2 L3
ok
al
I1– I1+
al
t OFF, t ON
I2– I2+
LOAD
t ON
AL1
Measuring circuit data
Over/under current setting ranges AC / DC
Frequency
Resolution
Accuracy
Input resistance
0…5A
DC, AC 16 … 100 Hz
100 mA
2 % ±1 digit
5 mΩ
Time data
Alarm delay setting time
Reset time setting range
Voltage failure buffering
0.1 … 999.9 s
0.1 … 999.9 s
ca. 30 ms
Contacts
Type / Material
Rated operational current
Max. inrush current
Max. switching voltage
Max. AC load AC-1 (Fig.1)
Max. DC load DC-1, 24 V / 220 V (Fig.2)
Recommended min. contact load
2 CO / AgNi 0.15
6A
15 A
250 V
1250 VA
120 W / 25 W
10 mA / 10 V
Power supply
Nominal voltage AC/DC
Operating voltage range
AC frequency
Power consumption
UC12-48V
12 … 48 V
10 … 57 V
16 … 63 Hz
2 W / 3 VA
I3– I3+
AL2
15 16 18 25 26 28
A1 A2
Fig. 1 AC voltage enduranc
Cycles
107
AC-1
106
105
0
1
2
3
4
Switching current [A]
5
6
Fig. 2 DC load limit curve
10
DC-1
Current [A]
6
5
UC110-240V
110 … 240 V
85 … 250 V
16 … 63 Hz
2 W / 3 VA
3
2
1
0.5
0.3
0.2
Insulation
Test voltage open - contact
Test voltage between poles
Test voltage measuring input - contacts
Test voltage measuring input - power supply
1 kVrms 1 minute
2.5 kVrms 1 minute
4 kVrms 1 minute
4 kVrms 1 minute
General specifications
Ambient temperature storage /operation
Mechanical life of contacts
Conductor cross section
Ingress protection rating
Max. screw torque
Housing material
Weight
-40 … +85 °C / -25 … +60 °C
30 x 106 operations
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP20
0.4 Nm
Lexan EXL 9330
130 g
0.1
0
50
100
150
200
Voltage [V]
250
300
Dimensions [mm]
Standard types
UC 12-48 V (AC/DC), 15…60 Hz
UC 110-240 V (AC/DC, 15…60 Hz
MRI32R/UC12-48V
MRI32R/UC110-240V
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Monitoring Relays
AL
INPUT
LOAD
INPUT
HYST
LIMIT1
LOAD
INPUT
HYST
LIMIT2
Railway/01a.12 |
37
1-phase monitoring
MRM11R
Multifunction monitoring relay AC/DC, single phase
DIN Rail mounting according to DIN 43 880
Type: MRM11R/…V
Multifunctional monitoring relay for simultaneous measurement of current and voltage and
monitoring of U, I, P, cosφ and f. Alarm delay setting. Alarm LED. Display for multimeter function,
alarm signal and interactive parameter setting.
1 change-over alarm contact 6 A 250 V. Comfortable parameter setting.
Monitoring function
LIMIT 1
HYST 1
LIMIT 1
HYST
INPUT
INPUT
HYST
LIMIT2
HYST
LIMIT1
AL
AL
t OFF
ok
ok
ye
fail
t OFF
ok
al
rd
alarm
t ON
t OFF
ok
al
Alarm delay:
AL
t ON
t OFF
Connection diagram
N
ok
al
L
U– U–
al
t OFF, t ON
LOAD
t ON
Measuring circuit data
Voltage setting ranges AC / DC
Current setting ranges AC / DC
Frequency
Resolution U / I
Accuracy
Input resistance U / I
0 … 480 V / 0 … 690 V
0…5A
DC, AC 16 … 100 Hz
100 mV / 100 mA
2 % ±1 digit
1 MΩ / 5 mΩ
Time data
Alarm delay setting time
Reset time setting range
Voltage failure buffering
0.1 … 999.9 s
0.1 … 999.9 s
ca. 30 ms
Contacts
Type / Material
Rated operational current
Max. inrush current
Max. switching voltage
Max. AC load AC-1 (Fig.1)
Max. DC load DC-1, 24 V / 220 V (Fig.2)
Recommended min. contact load
1 CO / AgNi 0.15
6A
15 A
250 V
1250 VA
120 W / 25 W
10 mA / 10 V
Power supply
Nominal voltage AC/DC
Operating voltage range
AC frequency
Power consumption
UC12-48V
12 … 48 V
10 … 57 V
16 … 63 Hz
2 W / 3 VA
I– U/I+
AL
15 16 18
A1 A2
Fig. 1 AC voltage enduranc
Cycles
107
AC-1
106
105
0
1
2
3
4
Switching current [A]
5
6
Fig. 2 DC load limit curve
10
DC-1
6
5
UC110-240V
110 … 240 V
85 … 250 V
16 … 63 Hz
2 W / 3 VA
Current [A]
t ON
gn
INPUT
2
1
0.5
0.3
0.2
Insulation
Test voltage open - contact
Test voltage measuring input - contacts
Test voltage measuring input - power supply
1 kVrms 1 minute
4 kVrms 1 minute
4 kVrms 1 minute
General specifications
Ambient temperature storage /operation
Mechanical life of contacts
Conductor cross section
Ingress protection rating
Max. screw torque
Housing material
Weight
-40 … +85 °C / -25 … +60 °C
30 x 106 operations
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP20
0.4 Nm
Lexan EXL 9330
130 g
0.1
0
50
100
150
200
Voltage [V]
250
300
Dimensions [mm]
Standard types
UC 12-48 V (AC/DC), 15…60 Hz
UC 110-240 V (AC/DC), 15…60 Hz
MRM11R/UC12-48V
MRM11R/UC110-240V
Technical approvals, conformities
See table on page 53.
38 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
3-phase monitoring
MRM32R
Multifunction monitoring relay AC/DC, three phase
DIN Rail mounting according to DIN 43 880
Type: MRM32R/…V
Multifunctional monitoring relay for simultaneous measurement of current and voltage and
monitoring of U, I, P, cosφ and f and Δφ. Alarm delay setting. Alarm LED. Display for multimeter
function, alarm signal and interactive parameter setting.
2 change-over alarm contacts 6 A 250 V. Comfortable parameter setting.
Monitoring function
LIMIT 1
HYST 1
LIMIT 1
HYST
AL
t ON
t OFF
ok
gn
ok
ye
fail
t OFF
ok
al
rd
alarm
t ON
t OFF
ok
al
Alarm delay:
AL
t ON
t OFF
Connection diagram
N L1 L2 L3
ok
al
al
t OFF, t ON
LOAD
t ON
U– U–
I1– U/I1+
I2– U/I2+
I3– U/I3+
AL1
Measuring circuit data
Voltage setting ranges AC / DC
Current setting ranges AC / DC
Frequency
Resolution U / I
Accuracy
Input resistance U / I
0 … 480 V / 0 … 690 V
0…5A
DC, AC 16 … 100 Hz
100 mV / 100 mA
2 % ±1 digit
1 MΩ / 5 mΩ
Time data
Alarm delay setting time
Reset time setting range
Voltage failure buffering
0.1 … 999.9 s
0.1 … 999.9 s
ca. 30 ms
Contacts
Type / Material
Rated operational current
Max. inrush current
Max. switching voltage
Max. AC load AC-1 (Fig.1)
Max. DC load DC-1, 24 V / 220 V (Fig.2)
Recommended min. contact load
2 CO / AgNi 0.15
6A
15 A
250 V
1250 VA
120 W / 25 W
10 mA / 10 V
Power supply
Nominal voltage AC/DC
Operating voltage range
AC frequency
Power consumption
UC12-48V
12 … 48 V
10 … 57 V
16 … 63 Hz
2 W / 3 VA
AL2
15 16 18 25 26 28
A1 A2
Fig. 1 AC voltage enduranc
Cycles
107
AC-1
106
105
0
1
2
3
4
Switching current [A]
5
6
Fig. 2 DC load limit curve
10
DC-1
Current [A]
6
5
UC110-240V
110 … 240 V
85 … 250 V
16 … 63 Hz
2 W / 3 VA
3
2
1
0.5
0.3
0.2
Insulation
Test voltage open - contact
Test voltage between poles
Test voltage measuring input - contacts
Test voltage measuring input - power supply
1 kVrms 1 minute
2.5 kVrms 1 minute
4 kVrms 1 minute
4 kVrms 1 minute
General specifications
Ambient temperature storage /operation
Mechanical life of contacts
Conductor cross section
Ingress protection rating
Max. screw torque
Housing material
Weight
-40 … +85 °C / -25 … +60 °C
30 x 106 operations
Stranded wire 2.5 mm2, 2 x 1.5 mm2
IP20
0.4 Nm
Lexan EXL 9330
130 g
0.1
0
50
100
150
200
Voltage [V]
250
300
Dimensions [mm]
Standard types
UC 12-48 V (AC/DC), 15…60 Hz
UC 110-240 V (AC/DC), 15…60 Hz
MRM32R/UC12-48V
MRM32R/UC110-240V
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Monitoring Relays
AL
INPUT
LOAD
INPUT
HYST
LIMIT1
LOAD
INPUT
HYST
LIMIT2
Technical approvals, conformities
See table on page 53.
Railway/01a.12 |
39
CT-System
Plug-in current monitoring modules
(to combine with industrial relays)
CT512R, CT515R, CT516R
Plug-in current monitoring module; 0.2 A, 2 A, 6 A. DC 24 V operation
Type: CT512R, CT515R, CT516R /… V
Plug-in current monitoring modules for sockets with module slot in combination with
plug-in relays. DC 24 V operation. LED alarm state indicators for OK and fail.
Separate adjustment of upper and lower level.
Monitoring functions
Connection diagram
Over / under voltage
internal / external range
Measuring circuit data
Type
Measuring and setting ranges (rotary knobs)
Max. current 100% duty cycle
Voltage drop on internal shunt res. @ Imax
Temperature drift -25 … 60 °C
CT512R
0 … 200 mA
300 mA
300 mV
≤ 3 %
Time data
Alarm delay time settings
Reset time
100 ms, 500 ms, 2 s
100 ms
Power supply
Nominal voltage
Operation voltage range Supply current
Polarity reversal protection
DC 24 V
18 … 30 V
3 … 7 mA
- 30 V
General specifications
Ambient temperature storage/operation
Ingress protection rating
Housing material
Weight
-40 … +85 °C / -40 … +70 °C
IP 40 when plugged in
Lexan
25 g
CT515RCT516R
0 … 2 A
0…6A
3 A
7A
200 mV
100 mV
≤ 3 %
≤3%
DC 36 V
18 … 45 V
5 mA
- 51 V
Standard types
CT512R
CT515R
CT516R
CT512R/DC24V
CT515R/DC24V
CT516R/DC24V
CT512R/DC36V
CT515R/DC36V
CT516R/DC36V
Remark: This module is part of several ready for connection units consisting of ­socket,
relay and module.
A wide variety of suitable relays is available.
Dimensions [mm]
16
75
4
38
4
20
54
Technical approvals, conformities
See table on page 53.
40 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
CT-System
Plug-in DC voltage monitoring module
(to combine with industrial relays)
CT524R, plug-in DC voltage monitoring module
Plug-in DC voltage monitoring module
Type: CT524R /…V
Plug-in DC voltage monitoring module for sockets with module slot in combination with
11p plug-in relays. DC 24 V operation. LED alarm state indicators for OK and fail.
Separate adjustment of upper and lower level.
Monitoring functions
Connection diagram
Over / under voltage
internal / external range
Time data
Alarm delay time settings
Reset time
100 ms, 500 ms, 2 s
100 ms
Power supply
Nominal voltage
Operation voltage range Supply current
Polarity reversal protection (1 minute)
DC 24 V
18 … 30 V
8 … 13 mA
- 30 V
General specifications
Ambient temperature storage/operation
Ingress protection rating
Housing material
Weight
-40 … + 85 °C / -40 … +70 °C
IP 40 when plugged in
Lexan
25 g
Monitoring Relays
Measuring circuit data
TypeCT524R
Measuring and setting ranges (rotary knobs)
0 … 30 V
Over voltage (10 ms)
± 150 V
Input resistance
106 kΩ
Temperature drift -25 … 60 °C
≤2%
Standard types
CT524R
3
CT524R/DC24V
Remark: This module is part of several ready for connection units consisting of ­socket,
relay and module.
A wide variety of suitable relays is available.
Dimensions [mm]
16
75
4
38
4
20
54
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
41
Plug-in monitoring Set
CT-System
Power Relay
Control Relay
C31L
C32L
DC Voltage Monitoring-Set
DC Current Monitoring-Set
Set-Delivery includes:
•Relay
•Module
•Front cover
•Socket
•Retaining clip
Relay data‘s see:
Section industrial Relays
Universal Power Relay 10A
with 3 power change-overcontacts this is the robust relay for
AC and DC circuits ranging from
50mA 10V.
10A 250VA
6A 250VA
MIN
50mA 10V
10mA 5V
CT524
DC Voltage Monitoring
0-30V
40V
B1 A1
A2
+
Input resistance
B1 ➞ A2: 100kΩ
R
A2 35 25 15 B1 A1
DC Current Monitoring
10 11 6 1 12 2
Set Order-Nr.:
Set Order-Nr.:
0-200mA
300mA
Delivery includes:
•Relay C32D/R DC24V
•Module CT524R/DC24V
•Front cover FS-C
•Socket C12B0
•Retaining clip HF-32
Set Order-Nr.:
Set Order-Nr.:
DC 24, 36V
B1 A1
RL
CT524.32R/24V
Delivery includes:
•Relay C31D/R DC24V
•Module CT524R/DC24V
•Front cover FS-C
•Socket C12B0
•Retaining clip HF-32
CT512.31R/…V
A2
A2 35 25 15 B1 A1
10 11 6 1 12 2
+
CT512
Triggering
R
CT524.31R/24V
V in
Range:
I max:
38 36 28 26 18 16
TIMER-MODUL
4 functions can be selected: Overvoltage / undervoltage monitoring with
adjustable hysteresis or 2 range monitors (INT or EXT). Adjustable alarm
delay. LED display for errors and ok. Contact inspection window at the
top. Manual safety operation.
Module see page 40 / 41
9 8 7 5 3 4
38 36 28 26 18 16
TIMER-MODUL
Monitoring Module
Triggering
The control relay with highest
switching reliablility for control
and signal circuits ranging from
10mA 5V.
MAX
9 8 7 5 3 4
Range:
U max:
Relay with
3 twin contacts 6A
Voltage drop
A1 ➞ B1 ≤ 300mV
in
CT512.32R/…V
DC 24, 36V
Delivery includes:
• Relay C31D/R DC…V
• Module CT512R/DC…V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
Delivery includes:
• Relay C32D/R DC…V
• Module CT512R/DC…V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
Set Order-Nr.:
Set Order-Nr.:
+
CT515
DC Current Monitoring
Range:
I max:
CT515.31R/…V
0-2A
3A
Triggering
DC 24, 36V
A2
B1 A1
RL
Voltage drop
A1 ➞ B1 ≤ 200mV
in
CT515.32R/…V
DC 24, 36V
Delivery includes:
• Relay C31D/R DC…V
• Module CT515R/DC…V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
Delivery includes:
• Relay C32D/R DC…V
• Module CT515R/DC…V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
Set Order-Nr.:
Set Order-Nr.:
+
CT516
DC Current Monitoring
CT516.31R/…V
CT516.32R/…V
0-6A
7A
DC 24, 36V
DC 24, 36V
Range:
I max:
Triggering
A2
B1 A1
RL
in
+
42 | Railway/01a.12
Voltage drop
A1 ➞ B1 ≤ 100mV
Delivery includes:
• Relay C31D/R DC…V
• Module CT516R/DC…V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
Delivery includes:
• Relay C32D/R DC…V
• Module CT516R/DC…V
• Front cover FS-C
• Socket C12B0
• Retaining clip HF-32
Dimensions [mm]
See page 40.
Technical approvals,
conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Insulation monitoring
ESU-D2R
Insulation monitoring relay for unearthed DC-networks
DIN Rail mounting
Type: ESU-D2R/UC24V
Earth insulation resistance monitoring relay
Pre alarm 1 CO and main alarm 1 NO + 1 CO contact outputs 5 A / 250 V
UC 24 … 48 V, operating voltages, monitoring of DC 12 … 48 V power supply networks.
Monitoring of earth interruption on the device.
The device measures single or combined resistances occurring against + or – pole of the
DC network. Adjustable alarm delay. Proved reliability in rolling stock applications.
Monitoring function
The ESU-D2 monitors the isolation resistance in nongrounded DC-networks (24 – 48 V).
Two alarm steps (prealarm AL1 and main alarm AL2) are
indicated via separate output contacts.
Displays: bargraph-display of the measured earthing
resistance (green = ok). Two red LEDs show the ground
tendency towards plus (+) or minus (–).
Output terminals 5 V for the external display of the earthing
resistance (0,1 V/kΩ).
Test functions: Periodic automatic check, also with key
“Test”.
Environmental failures: monitoring of AC-short circuit, overvoltage, ground interruption.
V
1 … 50 kΩ / 4 … 30 kΩ
4 kΩ
≤ 10 %
60 V
≤ 5 mA
0.2 mA
AC 250 V
1.5 µF 1)
Only one ESU-D2
per DC network!
0.1 … 10 s
600 ms
1s
Monitoring Relays
Connect E1, E2 separately on E.
Fig. 2 DC load limit curve
5
4
3
DC-1
2
Contacts
Type / Material
Rated operational current / min. contact load
Max. switching voltage (Fig. 1)
2 CO, 1 NO micro disconnection / AgNi
5 A / 1 mA 12 V
250 V
Power supply
Nominal voltage
Operation voltage range
Power consumption
Voltage failure buffering
UC 24-48 V
16.8 … 60 V
2W
≥ 50 ms
1
3
0.5
0.2
0.1
0
50
100
150
200
Voltage [V]
250
300
2 kVrms 1 minute
General specifications
Ambient temperature storage /operation
Ingress protection rating Max. screw torque
Weight
-40 … +85 °C / -40 … +70 °C
Housing: IP 40, terminals: IP 20
0.5 Nm
250 g
Standard types
75
Dimensions [mm]
Insulation
Test voltage contacts to other circuits
UC24-48 (AC/DC)
Pre alarm
Main alarm
Types for capacitances until 60 µF on request
Time data
Alarm delay time adjustment range Fault detection time
Auto reset time, fail to OK
Installation to be monitored
DC 0.. 52V
Current [A]
1)
+
TS35
Measuring circuit data
Measuring / setting range for pre alarm Constant value for main alarm Tolerance Overvoltage alarm level of DC network
Input current + → -
Sampling current pulses +/- → earth
Overvoltage safety from earth to +/- poles Max. capacity +/- → earth
Connection diagram
50
ESU-D2R/UC24-48V
5
105
Pluggable terminal blocks
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01a.12 |
43
Notes
44 | Railway/01a.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
4.Sockets
Rated load
Socket for 11 pin relays and plug-in modules
C11A
10 A, 250V
Socket for 11 pin relays and plug-in modules
C12B0
10A, 250V
Socket for 14 pin relays
CS-144
10A, 250V
Socket for miniature relays
CS-118
10A, 250V
Pins
Sockets
ApplicationTypes
4
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01.12 |
45
C11A
Socket for 11 pin plug-in relays C31D/R, C32D/R, R3-N3x and
plug-in modules
Type: C11A
3-pole, 1 level
Module slot for over voltage suppressing and LED indicator modules,
coil bridge bus bar to connect in A2
Rated current
Specifications
Rated load
Insulation – All terminals/DIN rail
– Terminal/terminal
Cross-section of connecting wire
– Multi-wire
Max. screw torque
Screw dimensions
Labelling space Connection label Mounting
Ambient temperature operation / storage
Weight
10 A
10 A
Test voltage Vrms / 1 min
2.5 kV
2.5 kV
1 x 4 mm2, 2 x 2.5 mm2
0.7 Nm
M3, Pozi, slot
detachable
1...11; DIN / EN
DIN rail TS35 or panel mounting
-40 (no ice) … +70 ºC / -40 … + 85 °C
56 g
Associated plug-in 11-pin relays C31D/R, C32D/R and R3-N3x
Type
C11A
Connection diagram
10 (A2)
9 (34)
11 (31)
8 (32)
6 (21)
7 (24)
1 (11)
5 (22)
3 (14)
2 (A1)
4 (12)
Accessories
Retaining springs, steel HF-32 (Relays C31, C32)
HF-33 (Timecube + Relays C31, C32)
S3-C (Relays R3-N3x)
Coil bridge bus bar C-A2
Marking strip cardboard white 8 x 16L-16/5 (under transp. plastic cover)
Illuminated display
RL1/…
Suppressing unit
RC1/…
RCL1/…
RD1/…
Dimensions [mm]
Technical approvals, conformities
See table on page 53.
46 | Railway/01.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
C12B0
Socket for 11 pin plug-in relays C31D/R, C32D/R, R3-N3x and
plug-in control modules
Type: C12B0
3-pole, 1 level
Module slot for timer- and monitoring modules, over voltage suppressing and
LED indicator modules
coil bridge bus bar to connect in A2
Rated current
Specifications
Rated load
Insulation – All terminals/DIN rail
– Terminal/terminal
Cross-section of connecting wire
– Multi-wire
Max. screw torque
Screw dimensions
Labelling space Connection label Mounting
Ambient temperature operation / storage
Weight
10 A
10 A
Test voltage Vrms / 1 min
2.5 kV
2.5 kV
1 x 4 mm2, 2 x 2.5 mm2
0.7 Nm
M3, Pozi, slot
detachable
1...12; DIN/EN
DIN rail TS35 or panel mounting
-40 (no ice) … +70 ºC / -40 … +85 °C
61 g
Associated plug-in 11-pin relays C31D/R, C32D/R and R3-N3x
Type
C12B0
Connection diagram
10 (A2)
9 (34)
11 (31)
8 (32)
6 (21)
7 (24)
1 (11)
5 (22)
12 (B1)
3 (14)
2 (A1)
4 (12)
Accessories
Retaining springs, steel HF-32 (Relays C31, C32)
HF-33 (Timecube + Relays C31, C32)
S3-C (Relays R3-N3x)
Coil bridge bus bar C-A2
Marking strip cardboard white 8 x 16L-16/5 (under transp. plastic cover)
Illuminated display
RL1/…
Suppressing unit
RC1/…
RCL1/…
RD1/…
Sockets
Dimensions [mm]
4
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01.12 |
47
CS-144
Socket for 14-pin plug-in relays R4-Ax
Type: CS-144
4-pole, 2 connection level
Integrated retaining clip and labelling space
Rated current
Specifications
Rated load
Insulation – All terminals/DIN rail
– Terminal/terminal
Cross-section of connecting wire
– Single-wire
– Multi-wire
Max. screw torque
Screw dimensions
Integrated retaining clip/plastic Labelling space Connection label Mounting
Ambient temperature operation / storage
Weight
10 A
10 A / 250 V
Test voltage Vrms / 1 min
2.5 kV
2.5 kV
4 mm2 or 2 x 2.5 mm2
22 - 14 AWG
1 Nm
M3.5, Pozi, slot
for relay series C4
detachable
1...14; DIN/EN
DIN rail TS35 or panel mounting
-40 (no ice) … +70 ºC / -40 … +80 °C
80 g
Associated, plug-in 14-pin relays
R4-A4x
Type
CS-144
Accessories
Retaining spring, steel Retaining clip, plastic S4-C
S3-CMG
Connection diagram
12 (41)
14 (A2)
10 (42)
11 (44)
9 (31)
7 (32)
8 (34)
6 (21)
4 (22)
5 (24)
1 (12)
2 (14)
3 (11)
13 (A1)
Dimensions [mm]
11 44 8 34 5 24 2 14
10 42 7 32 4 22 1 12
3.6
ø4
7
4
1
11
8
5
2
6
9
14
Incl. Clip
7
3
12
M4/M5
92
10
21
7 32 4 22 1 12
13
CS-144
14 A2
13 A1
12 41 9 31 6 21 3 11
38
3
29
Technical approvals, conformities
See table on page 53.
48 | Railway/01.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
CS-118
Socket for miniature plug-in relays R7-A, R7-T
Type: CS-18
2-pole, 1 level
integrated clip and marking label
suitable for C80 series time relays with clip
coil bridge bus bar to connect in A2
plug-in slot for overvoltage suppressing units
Rated current
10 A
Specifications
Rated load
Insulation
– All terminal/DIN rail
– Terminal/terminal
Cross section of connecting wire
– Single wire
– Multi wire
Max. screw torque
Screw dimensions
Integrated retaining clip/plastic
Labelling space
Connection label
Mounting
Ambient temperature operation / storage
Weight
4 mm2, 2 x 1.5 mm2
2.5 mm2 / AWG 16, 2 x 1 mm2 / AWG 18
0.7 Nm
M3, Pozi, slot
for relays C7
detachable
1…8, DIN/EN
DIN rail TS35 or panel mounting
-40 (no ice) … +70 °C / -40 … +80 °C
37 g
Associated plug-in 8-pin relays
R7-A, R7-T
Type
CS-118
Accessories
Coil bridge bus bar
Retaining clip, plastic S7-B
RC-G
10 A / 250 V
Test voltage Vrms / 1 min
2.5 kV
2.5 kV
Connection diagram
8 (A2)
4 (24)
6 (21)
2 (22)
5 (11)
3 (14)
7 (A1)
1 (12)
Sockets
Dimensions [mm]
4
Technical approvals, conformities
See table on page 53.
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01.12 |
49
Notes
50 | Railway/01.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Sockets
Notes
4
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01.12 |
51
Notes
52 | Railway/01.12
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Technical approvals, conformities
YES
YES
NO
N/A
Category 1, Class B
F2
I3
E120922
YES
YES
YES
NO
N/A
Category 1, Class B
F2
I3
E120922
R3-N3…
T3
YES
R4-A4…
T1
YES
R7-A2…
T3
YES
R7-T2…
T3
YES
C203.6R
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
HL2
HL2
CINT-21
TX
YES
NO
YES
NO
NO
Category 1, Class B
F2
I3
HL2
HL2
CINT-22
TX
YES
NO
YES
NO
NO
Category 1, Class B
F2
I3
HL2
HL2
CINT-25
T2
YES
NO
YES
NO
NO
Category 1, Class B
F2
I3
HL2
HL2
CINT-61
TX
YES
NO
YES
NO
NO
Category 1, Class B
F2
I3
HL2
HL2
CINT-62
TX
YES
NO
YES
NO
NO
Category 1, Class B
F2
I3
HL2
HL2
CINT-63
TX
YES
NO
YES
NO
NO
Category 1, Class B
F2
I3
HL2
HL2
C2
Listed
YES
C1
R24
TX
TX
S2
R23
C31D/R
C32D/R
Type
Power
supply
S1
Inflammability I
UL
Smoke gas
index F
EN 45545-2
Schock &
vibrations test
NF F 16-101/102
Protective
coating PCB
EN 61373
Temperature
rating
EN 50155
Relays
Category 1, Class B
Approval in process
Category 1, Class B
Category 1, Class B
Time relays
RIC20-…
YES
YES
YES
NO
NO
In approval
RIC25-…
YES
YES
YES
NO
NO
Category 1, Class B
CIM1R
TX
YES
YES
YES
YES
YES
Category 1, Class B
F2
I3
HL2
HL2
CIM12R
TX
YES
YES
YES
YES
YES
Category 1, Class B
F2
I3
HL2
HL2
CIM13R
TX
YES
YES
YES
YES
YES
Category 1, Class B
F2
I3
HL2
HL2
CIM2R
TX
YES
YES
YES
YES
YES
Category 1, Class B
F2
I3
HL2
HL2
CIM22R
TX
YES
YES
YES
YES
YES
Category 1, Class B
F2
I3
HL2
HL2
CIM23R
TX
YES
YES
YES
YES
YES
Category 1, Class B
F2
I3
HL2
HL2
CIM3R
TX
YES
YES
YES
YES
YES
Category 1, Class B
F2
I3
HL2
HL2
CIM32R
TX
YES
YES
YES
YES
YES
Category 1, Class B
F2
I3
HL2
HL2
CIM33R
TX
YES
YES
YES
YES
YES
Category 1, Class B
F2
I3
HL2
HL2
CT32R (modul)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
HL2
HL2
HL2
HL2
HL2
HL2
HL2
HL2
HL2
HL2
HL2
HL2
HL2
HL2
CT32.31R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT32.32R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT33R (modul)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT33.31R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT33.32R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT36R (modul)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT36.31R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT32.32R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
Monitoring relays
CT512R (modul)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT512.31R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
I3
CT512.32R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
CT515R (modul)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT515.31R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT515.32R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT516R (modul)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT516.31R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT516.32R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT524R (modul)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT524.31R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
CT524.32R (set)
TX
YES
YES
YES
NO
YES
Category 1, Class B
F2
I3
F2
I3
MRI11R
Approval in process
MRI32R
Approval in process
MRM11R
Approval in process
MRM32R
Approval in process
MRU11R
Approval in process
MRU32R
ESU-D2R
Approval in process
TX
YES
YES
YES
YES
YES
Category 1, Class B
Sockets
C11A
TX
N /A
N /A
N /A
N /A
N /A
Category 1, Class B
F2
I3
HL2
HL2
E120922
C12B0
TX
N /A
N /A
N /A
N /A
N /A
Category 1, Class B
F2
I3
HL2
HL2
E120922
CS-118
TX
N /A
N /A
N /A
N /A
N /A
Approval in process
F2
I3
HL2
HL2
E196531
CS-144
TX
N /A
N /A
N /A
N /A
N /A
Category 1, Class B
F2
I3
HL2
HL2
E196531
This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
Railway/01.12 |
53
railway/01a.2012E
Comat Ag • Bernstr. 4
CH-3076 Worb Tel. +41 (0)31 838 55 77
Fax +41 (0)31 838 55 99
www.comat.ch • info@comat.ch