Resistors Mount SOIC
Surface
Resistor
Networks
Surface Mount
SOIC
Surface
Mount
SOIC
SOIC
Series
Resistor
Networks
Make Possible
Resistor
Networks
·
SOIC
Seriesfor COTS applications
Tested
Both narrow and wide body versions available
Tested for COTS applications
Standard
JEDEC 8, 14, 16, and 20 pin packages
SOIC
Series
Both
narrow and wide body versions available
Ultra-stable
TaNSil® resistors on silicon substrates
• Tested
for COTS
applications
Standard
JEDEC
8, 14, 16, and 20 pin packages
RoHS
compliant
andversions
Sn/Pb terminations available
• Both
narrow
and
wide
body
Ultra-stable TaNSil®
resistors onavailable
silicon substrates
• Standard
JEDEC
8, and
14, 16,
and 20terminations
pin packages available
Standard
Sn/Pb
Pb-free
·
·
·
·
• Ultra-stable TaNSil® resistors on silicon substrates
• RoHS compliant and Sn/Pb terminations available
All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2)
IRC’s TaNSil® SOIC resistor networks are the perfect solution for high volume applications that demand a small
wiring board footprint. The .050" lead spacing provides higher lead density, increased component count,
lower resistor cost, and high reliability.
The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost
and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC’s self-passivating TaNSil® resistor film.
The SOIC series is ideally suited for the latest surface mount assembly techniques and each lead can be
100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses
created by soldering and temperature excursions.
For applications requiring high performance resistor networks in a low cost, surface mount package, specify
IRC SOIC resistor networks.
Electrical Data
Environmental Data
Resistance Range
10R to 250K
Absolute Tolerance
To ±0.1%
Ratio Tolerance to R1
To ±0.05%
Absolute TCR
To ±25ppm/°C
Tracking TCR
To ±5ppm/°C
Element Power Rating @ 70°C
Isolated Schematic
Bussed Schematic
100mW
50mW
Power Rating @ 70°C
SOIC-N Package
8-Pin
14-Pin
16-Pin
400mW
700mW
800mW
Power Rating @ 70°C
SOIC-W Package
16-Pin
20-Pin
1.2W
1.5W
Rated Operating________________
Voltage
(not to exceed √ Power X Resistance)
Operating Temperature
Noise
Test Per
MIL-PRF-83401
Typical
Delta R
Max
Delta R
Thermal Shock
±0.02%
±0.1%
Power
Conditioning
±0.03%
±0.1%
High Temperature
Exposure
±0.03%
±0.05%
Short-time
Overload
±0.02%
±0.05%
Low Temperature
Storage
±0.03%
±0.05%
Life
±0.05%
±0.1%
100 Volts
-55°C to +125°C
<-30dB
General Note
General
Note
General
Note
IRC
reserves the
right to make changes in product specification without notice or liability.
All
is subject
to IRC’s
own
data
andmake
is considered
accurate
at time
ofspecification
going to print.
Electronics
reserves
the
toto
make
changes
in product
specification
without
noticenotice
or liability.
TTinformation
electronics
reserves
theright
right
changes
in product
without
or liability.
AllIRC
information
isissubject
TTTT
Electronics’
data
and
is considered
accurate
at time
of going
to print.
All
information
subject
to
electronics’
own
data
and
considered
accurate
at time
of going
to print.
©
Advanced
FilmtoDivision
• 4222own
South
Staples
Street
•isCorpus
Christi
Texas
78411
USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
www.bitechnologies.com www.irctt.com
www.welwyn-tt.com
www.ttelectronicsresistors.com
SOIC Series Issue January 2009 Sheet 1 of 4
plcplc
© TT Electronics
electronics
09.15
11.
13
Surface Mount SOIC
Resistor
Networks
SOIC
SOICSeries
Series
Surface
SurfaceMount
MountSOIC
SOIC
Resistor
ResistorNetworks
Networks
Make Possible
Manufacturing Capability Data
ISOLATED SCHEMATIC A
Absolute
TCR
(ppm/°C)
BUSSED SCHEMATIC B
Ohmic
Range
(Ω)
Available
Tolerances
Available
Ratio
Tolerances
Best
Tracking
(±ppm/°C)
Ohmic
Range
(Ω)
Available
Tolerances
Available
Ratio
Tolerances
Best
Tracking
(±ppm/°C)
10-25
FGJ
FG
50
10-25
FGJ
FG
200
26-50
DFGJ
CDFG
10
26-50
FGJ
DFG
100
51-200
CDFGJ
CDFG
5
51-100
DFGJ
CDFG
50
5
101-200
DFGJ
BCDFG
25
201-500
BCDFGJ
BCDFG
20
250
201-250K
BCDFGJ ABCDFG
501-100K
100
5
26-50
DFGJ
CDFG
10
26-50
FGJ
DFG
100
51-200
CDFGJ
CDFG
5
51-100
DFGJ
CDFG
50
201-250K
BCDFGJ
ABFG
5
101-200
DFGJ
BCDFG
25
201-500
BCDFGJ
BCDFG
20
501-100K
50
BCDFGJ ABCDFG
BCDFGJ ABCDFG
5
26-50
DFGJ
CDFG
10
51-100
DFGJ
CDFG
50
51-200
CDFGJ
CDFG
5
101-200
DFGJ
BCDFG
25
201-250K
BCDFGJ
ABFG
5
201-500
BCDFGJ
BCDFG
20
501-100K
51-200
CDFGJ
CDFG
5
201-500
201-250K
BCDFGJ
ABFG
5
501-100K
BCDFGJ ABCDFG
5
BCDFGJ
20
BCDFG
25
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
BCDFGJ ABCDFG
5
SOIC Series Issue January 2009 Sheet 2 of 4
General
GeneralNote
Note
TT
to to
make
changes
in product
specification
without
noticenotice
or liability.
TT Electronics
electronicsreserves
reservesthe
theright
right
make
changes
in product
specification
without
or liability.
All
to to
TTTT
Electronics’
ownown
datadata
andand
is considered
accurate
at time
going
to print.
Allinformation
informationis issubject
subject
electronics’
is considered
accurate
at of
time
of going
to print.
www.ttelectronicsresistors.com
www.bitechnologies.com www.irctt.com
www.welwyn-tt.com
©
plcplc
© TT
TTElectronics
electronics
09.15
11. 13
Surface Mount SOIC
Surface Mount SOIC
Resistor Networks
Resistor Networks
Make Possible
SOIC Series
SOIC Series
N
(4.902 ± 0.102) (8.661 ± 0.102) (9.906 ± 0.102) (10.211 ± 0.102) (12.751 ± 0.102)
E
H
A
1
2
3
0.050" Typ
(5.994 ± 0.203)
(10.312 ± 0.203)
(3.886 ± 0.102)
(7.493 ± 0.102)
(1.626 ± 0.102)
(2.540 ± 0.102)
(0.191 ± 0.254)
(0.279 ± 0.051)
Note: N = number of pins (8, 14, 16)
D
A
C
0.016" ± .002"
0° min / 8° max
0.007" ±0.003"
N
N
R1
2
1
3
Schematic A
Isolated
N
% Of Rated Power
100
R1
1
.033"±0.017
2
3
50
Schematic B
Bussed
Note: N = number of pins (8, 14, 16)
10
R1
1
2
25
3
Schematic B
Bussed
70
125
Ambient Temperature (°C)
Note: N = number of pins (8, 14, 16)
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
SOIC Series Issue January 2009 Sheet 3 of 4
General Note
General
Note
TT
Electronics
reserves the right to make changes in product specification without notice or liability.
TT information
electronics reserves
right
to makeown
changes
in product
specification
orto
liability.
All
is subjectthe
to TT
Electronics’
data and
is considered
accuratewithout
at time notice
of going
print.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
© TT electronics plc
www.ttelectronicsresistors.com
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
09.15
11. 13
Surface Mount SOIC
Resistor
Networks
SOIC Series
Surface Mount
Surface
MountSOIC
SOIC
Resistor Networks
Resistor
Networks
Make Possible
SOIC Series
Ordering Data
Prefix
GUS - SS4A - 01 - 1002 - F
B
(Inclusion of Prefix is preferred but, historically, it may have been omitted.)
Style, Schematic and Termination
SS4A =
SS4ALF =
SS4B =
SS4BLF =
8-pin SOIC-N, 4 Isolated Resistors; Sn/Pb terminations
8-pin SOIC-N, 4 Isolated Resistors; 100% tin (Pb-free) terminations
8-pin SOIC-N, 7 Bussed Resistors; Sn/Pb terminations
8-pin SOIC-N, 7 Bussed Resistors; 100% tin (Pb-free) terminations
SS7A =
SS7ALF =
SS7B =
SS7BLF =
14-pin SOIC-N, 7 Isolated Resistors; Sn/Pb terminations
14-pin SOIC-N, 7 Isolated Resistors; 100% tin (Pb-free) terminations
14-pin SOIC-N, 13 Bussed Resistors; Sn/Pb terminations
14-pin SOIC-N, 13 Bussed Resistors; 100% tin (Pb-free) terminations
SS8A =
SS8ALF =
SS8B =
SS8BLF =
16-pin SOIC-N, 8 Isolated Resistors; Sn/Pb terminations
16-pin SOIC-N, 8 Isolated Resistors; 100% tin (Pb-free) terminations
16-pin SOIC-N, 15 Bussed Resistors; Sn/Pb terminations
16-pin SOIC-N, 15 Bussed Resistors; 100% tin (Pb-free) terminations
SL8A =
SL8ALF =
SL8B =
SL8BLF =
16-pin SOIC-W, 8 Isolated Resistors; Sn/Pb terminations
16-pin SOIC-W, 8 Isolated Resistors; 100% tin (Pb-free) terminations
16-pin SOIC-W, 15 Bussed Resistors; Sn/Pb terminations
16-pin SOIC-W, 15 Bussed Resistors; 100% tin (Pb-free) terminations
SL0A =
SL0ALF =
SL0B =
SL0BLF =
20-pin SOIC-W, 10 Isolated Resistors; Sn/Pb terminations
20-pin SOIC-W, 10 Isolated Resistors; 100% tin (Pb-free) terminations
20-pin SOIC-W, 19 Bussed Resistors; Sn/Pb terminations
20-pin SOIC-W, 19 Bussed Resistors; 100% tin (Pb-free) terminations
Absolute TCR Code
00 = ±250ppm/°C; 01 = ±100ppm/°C
02 = ±50ppm/°C; 03 = ±25ppm/°C
Resistance Code
4-Digit Resistance Code
Ex: 1002 = 10KΩ, 50R1 = 50.1Ω
(The USA style coding shown is preferred, but, historically, European style coding (e.g. 10K) may have been used.)
Absolute Tolerance Code
J = ±5%; G = ±2%; F = ±1%; D = ±0.5%
C = ±0.25%; B = ±0.1%
Optional Ratio Tolerance Code
G = ±2%; F = ±1%; D = ±0.5%;
C = ±0.25%; B = ±0.1%; A = ±0.05%
Packaging
Specify tubes or tape & reel.
Tape and reel packaging is compliant with EIA-481-D: 8 mm through 200 mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components
for Automatic Handling.
Tube packaging drawing detail available upon request.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
SOIC Series Issue January 2009 Sheet 4 of 4
General Note
General
Note
TT electronics
Electronics reserves
make
changes
in product
specification
without
noticenotice
or liability.
TT
reservesthe
theright
righttoto
make
changes
in product
specification
without
or liability.
All information
TTTT
Electronics’
own
data
andand
is considered
accurate
at time
of going
to print.
All
informationisissubject
subjecttoto
electronics’
own
data
is considered
accurate
at time
of going
to print.
© TT
plcplc
©
TT Electronics
electronics
www.ttelectronicsresistors.com
www.bitechnologies.com www.irctt.com
www.welwyn-tt.com
09.15
11.13