DIMENSIONAL CATALOG
ABS-DWV Pipe and Fittings
PVC-DWV Pipe and Fittings
PVC Sewer Pipe
PVC Schedule 30 DWV Thin
Wall 3.25 in. O.D. Pipe and
Fittings
DWV
(Updated August 22, 2016)
DC-DWV
© 1977-2016 Charlotte Pipe and Foundry Company
Plastic DWV Pipe and Fitting Dimensions
All products manufactured by Charlotte Pipe and
Foundry Company are proudly made in the U.S.A.
Table of Contents
Page
ABS “Foam Core” Schedule 40 DWV
Pipe Data...................................................4
ABS Plus® “Foam Core” Schedule 40 DWV
Pipe Data...................................................5
PVC “Foam Core” Schedule 40 DWV
Pipe Data...................................................6
RePVC® Schedule 40 DWV Pipe Data..................7
PVC Schedule 40 DWV Pipe Data.......................8
D 3034 PVC Sewer Pipe Data.............................9
PVC D 2729 Sewer and Drain Pipe Data............10
PVC and ABS DWV Fittings Dimensions.......11-55
PVC Thin Wall Sch. 30 Pipe Data......................56
PVC Thin Wall Sch. 30 Fittings
Dimensions..........................................57-63
Certification.................................................64-65
Warranty..........................................................66
Download our Tech Tools App for dimensional
info, tech calculators and more on your
mobile device.
Charlotte Pipe, ABS Plus and RePVC are registered trademarks of
Charlotte Pipe and Foundry Company.
Pipe Data
ABS Foam Core Pipe
ABS Schedule 40 DWV Pipe
(For Non-Pressure Applications)
ABS SCHEDULE 40 FOAM CORE (BLACK)
PLAIN END
ASTM F 628
MIN.
WT. PER
PART NO.
NOM. SIZE
UPC #
QTY. PER AVG. OD WALL 100 FT.
611942-SKID (IN.) (IN.) (LBS.)
ABS 3112 11⁄2” x 10’03132 2590 1.900 0.145
27.1
ABS 3112 11⁄2” x 20’03133 5180 1.900 0.145
27.1
ABS 3200 2” x 10’031341670 2.3750.154 37.7
ABS 3200 2” x 20’031353340 2.3750.154 37.7
ABS 3300 3” x 10’03136 750 3.5000.216 74.5
ABS 3300 3” x 20’031371500 3.5000.216 74.5
ABS 3400 4” x 10’03138 480 4.5000.237 107.1
ABS 3400 4” x 20’03139 960 4.5000.237 107.1
ABS 3600 6” x 20’03141 400 6.6250.280 187.8
NSF Listed. Meets All Requirements of ASTM F 628.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.
NOT FOR PRESSURE
Do not use PVC / ABS / ABS Plus® cellular core (foam core)
pipe for pressure applications. The use of cellular core pipe
in pressure applications may result in system failure and
property damage.
4
Pipe Data
ABS Plus® Foam Core DWV Pipe
ABS Plus is a registered trademark of Charlotte Pipe and Foundry Company.
ABS Plus Schedule 40 DWV Pipe
(For Non-Pressure Applications)
ABS PLUS SCHEDULE 40 FOAM CORE (BLACK)
PLAIN END
ASTM F 1488
MIN.
WT. PER
PART NO.
NOM. SIZE
UPC #
QTY. PER AVG. OD WALL 100 FT.
611942-SKID (IN.) (IN.) (LBS.)
APA 17112 11⁄2” x 10’12495 2590 1.900 0.145 31.4
APA 17112 11⁄2” x 20’12494 5180 1.900 0.145 31.4
APA 17200
2” x 10’12497 1670 2.3750.154 41.9
APA 17200
2” x 20’12496 3340 2.3750.154 41.9
APA 17300
3” x 10’12499 750 3.5000.216 84.0
APA 17300
3” x 20’12498 1500 3.5000.216 84.0
APA 17400
4” x 10’12501 480 4.5000.237 118.80
APA 17400
4” x 20’12500 960 4.5000.237 118.80
NSF Listed. Meets All Requirements of ASTM F 1488.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.
NOT FOR PRESSURE
Do not use PVC / ABS / ABS Plus® cellular core (foam core)
pipe for pressure applications. The use of cellular core pipe
in pressure applications may result in system failure and
property damage.
5
A
B
S
D
W
V
P
I
P
E
Pipe Data
PVC Foam Core Pipe
PVC Schedule 40 DWV Pipe
(For Non-Pressure Applications)
PVC SCHEDULE 40 FOAM CORE (WHITE)
PLAIN END
ASTM F 891
MIN.
WT. PER
PART NO.
NOM. SIZE
UPC #
QTY. PER AVG. OD WALL 100 FT.
611942-SKID (IN.) (IN.) (LBS.)
PVC 4112
PVC 4112
PVC 4200
PVC 4200
PVC 4300
PVC 4300
PVC 4400
PVC 4400
PVC 4600
PVC 4600
PVC 4800
PVC 4910
PVC 4912
11⁄2” x 10’04178
11⁄2” x 20’04177
2” x 10’ 04174
2” x 20’ 04173
3” x 10’ 03934
3” x 20’ 03935
4” x 10’ 03936
4” x 20’ 03937
6” x 10’ 03938
6” x 20’ 03939
8” x 20’ 03941
10” x 20’03942
12” x 20’03943
1650 1.900 0.145
3300 1.900 0.145
990 2.3750.154
1980 2.3750.154
1040 3.5000.216
920 3.5000.216
600 4.5000.237
1200 4.5000.237
280 6.6250.280
560 6.6250.280
360 8.6250.322
220 10.7500.365
120 12.7500.406
PVC SCHEDULE 40 FOAM CORE (WHITE)
32.3
32.3
43.9
43.9
89.7
89.7
123.8
123.8
235.0
235.0
371.0
566.3
700.0
BELL-END
MIN.
WT. PER
PART NO.
NOM. SIZE
UPC #
QTY. PER AVG. OD WALL 100 FT.
611942-SKID (IN.) (IN.) (LBS.)
PVC 4300B3” x 20’04782 920
PVC 4400B4” x 10’04783 540
PVC 4400B4” x 20’04784 1080
PVC 4600B6” x 10’09904 240
PVC 4600B6” x 20’04786 480
3.5000.216
4.5000.237
4.5000.237
6.6250.280
6.6250.280
89.7
123.8
123.8
235.0
235.0
NOTE: When ordering, please specify plain end or
bell end.
NSF Listed. Meets All Requirements of ASTM F 891.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.
NOT FOR PRESSURE
Do not use PVC / ABS / ABS Plus® cellular core (foam core)
pipe for pressure applications. The use of cellular core pipe
in pressure applications may result in system failure and
property damage.
6
Pipe Data
RePVC® DWV Pipe
RePVC is a registered trademark of Charlotte Pipe and Foundry Company.
PVC Schedule 40 DWV Pipe with Recycled Content
(For Non-Pressure Applications)
PVC SCHEDULE 40 (WHITE)
PLAIN END
ASTM F 1760
MIN.
WT. PER
PART NO.
NOM. SIZE
UPC #
QTY. PER AVG. OD WALL 100 FT.
611942-SKID (IN.) (IN.) (LBS.)
PVC 15112 11⁄2” x 20’11744 3300’ 1.9000.145 50.7
PVC 15200 2” x 20’117451980’ 2.3750.154 68.1
PVC 15300 3” x 20’11746 920’ 3.5000.216 141.2
PVC 15400 4” x 20’117481200’ 4.5000.237 201.2
PVC 15600 6” x 20’11749 560’ 6.6250.280 353.7
PVC 15800 8” x 20’11984 360’ 8.6250.322 544.6
NSF Listed. Meets All Requirements of ASTM D 4396 and ASTM F 1760.
All products manufactured by Charlotte
Pipe and Foundry Company are proudly
made in the U.S.A.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.
7
R
e
P
V
C
D
W
V
P
I
P
E
Pipe Data
PVC Schedule 40 DWV Pipe
PVC Schedule 40 DWV Pipe
PVC SCHEDULE
SCHEDULE 40
40 (WHITE)
(WHITE)
PVC
PLAIN END
END
PLAIN
PVC
PVC 1120
1120
ASTM
ASTM DD 2665
2665
WT. PER
PART NO.
NOM. SIZE
UPC #
QTY. PER AVG. OD MIN. WALL 100 FT.
611942-SKID (IN.) (IN.) (LBS.)
PVC 7100* 11⁄4”x10’03945 2120’1.660.140 42.4
PVC 7100* 11⁄4”x20’03946 4240’1.660.140 42.4
PVC 7112* 11⁄2”x10’03947 1650’1.900.145 51.8
PVC 7112* 11⁄2”x20’03948 3300’1.900.145 51.8
PVC 7200* 2”x10’03949 990’2.375.154 69.5
PVC 7200* 2”x20’ 039501980’2.375.154 69.5
PVC 7300* 3”x10’ 039511040’3.500.216 144.2
PVC 7300* 3”x20’03952 920’3.500.216 144.2
PVC 7400 †4”x10’03953 600’4.500.237 205.5
PVC 7400 †4”x20’ 039541200’4.500.237 205.5
PVC 7500 †5”x20’04837 760’5.563.258 272.5
PVC 7600 †6”x10’03955 280’6.625.280 361.2
PVC 7600 †6”x20’03956 560’6.625.280 361.2
PVC 7800 †8”x10’13087 180’8.625.322 543.6
PVC 7800 †8”x20’03958 360’8.625.322 543.6
PVC 7910 †10”x20’03959 220’10.750 .365 770.7
PVC 7912 †12”x20’03961 120’12.750 .406 1019.0
PVC 7914 †14”x20’04862 60’14.000 .437 1205.0
PVC 7916 †16”x20’04918 60’16.000 .500 1575.7
* Dual Marked ASTM D 1785 & ASTM D 2665.
† Triple Marked ASTM D 1785 & ASTM D 2665 & ASTM F 480.
NSF Listed. Meets All Requirements of
ASTM D 1784, ASTM D 1785, and
ASTM D 2665.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.
8
Pipe Data
PVC Sewer Pipe
PVC SDR 35 PSM Pipe
SDR-35
ASTM D 3034 & ASTM F 477
GASKETED - PS 46
PART NO.
NOM. SIZE
S/M 6004G
S/M 6004G
S/M 6006G
S/M 6006G
S/M 6008G
UPC #
611942-
QTY. PER SKID
LAYING
LENGTH
WT. PER
100 FT. (LBS.)
AVG. OD
(IN.)
MIN. WALL
(IN.)
4”x14’ 11920 84014’-0”110.4 4.215 .120
4”x20’ 040121200 20’-0”109.7 4.215 .120
6”x14’ 11921 39214’-0”249.6 6.275 .180
6”x20’04016 56020’-0”247.0 6.275 .180
8”x14’ 11922 14014’-0”451.0 8.400 .240
Weight is approximate and is for shipping purposes only.
SDR-35
SOLVENT WELD - PS 46
PART NO.
NOM. SIZE
S/M 6004
S/M 6004
S/M 6006
S/M 6006
P
V
C
UPC #
611942-
QTY. PER SKID
LAYING
LENGTH
WT. PER
100 FT. (LBS.)
4”x10’0400860010’-0”108.3
4”x20’ 04009120020’-0”108.3
6”x10’0401328010’-0”241.7
6”x20’0401456020’-0”241.7
AVG. OD
(IN.)
4.215
4.215
6.275
6.275
MIN. WALL
(IN.)
.120
.120
.180
.180
Weight is approximate and is for shipping purposes only.
Meets All Requirements of ASTM D 3034.
SDR 35 Gaskets meet or exceed ASTM F 477. Gasketed joints meet ASTM D 3212.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.
NOT FOR PRESSURE
Do not use PVC Sewer pipe for pressure applications. The
use of sewer pipe in pressure applications may result in
system failure and property damage.
9
S
E
W
E
R
P
I
P
E
Pipe Data
PVC Sewer and Drain Pipe
PVC ASTM D 2729 Pipe
SOLVENT WELD BELLED END
PART NO.
NOM. SIZE
UPC #
611942-
QTY. PER SKID
AVG. OD
(IN.)
ASTM D 2729
MIN. WALL BELL DEPTH
(IN.)
(IN.)
WT. PER
100 FT. (LBS.)
PVC 30030 3” x 10’10903 810’3.2500.070 3.00
PVC 30040 4” x 10’10905 500’4.2150.075 3.50
52.8
70.4
Perforated PVC ASTM D 2729 Pipe
SOLVENT WELD BELLED END
PART NO.
NOM. SIZE
UPC #
611942-
QTY. PER SKID
AVG. OD
(IN.)
ASTM D 2729
MIN. WALL BELL DEPTH
(IN.)
(IN.)
WT. PER
100 FT. (LBS.)
P VC 30030P3” x 10’118141040’3.250 0.070 3.00 52.8
PVC 30040P4” x 10’11815 500’4.2150.075 3.50 70.4
Perforated pipe is supplied with two rows of 1/2” diameter holes every five inches.
Rows are parallel to the pipe axis and are 120° apart.
Weight is approximate and is for shipping purposes only.
Pipe listed in this section meets or exceeds the requirements of ASTMD 2729.
All products manufactured by Charlotte Pipe and Foundry Company are proudly made
in the U.S.A.
Failure to follow safety precautions may result in
misapplication or improper installation and testing which
can cause severe personal injury and / or property damage.
Primers and cements are extremely flammable and may
be explosive. Do not store or use near heat or open
flame, or death or serious injury may occur.
• Solvent fumes created during the joining process are
heavier than air and may be trapped in newly installed
piping systems.
• Ignition of the solvent vapors caused by spark or flame
may result in injury or death from explosion or fire.
• Read and obey all manufacturers' warnings and any
instructions pertaining to primers and cements.
• Provide adequate ventilation to reduce fire hazard and
to minimize inhalation of solvent vapors when working
with cements, primers and new piping systems.
NOT FOR PRESSURE
Do not use PVC Sewer pipe for pressure applications. The
use of sewer pipe in pressure applications may result in
system failure and property damage.
10
PVC and ABS DWV Fittings
HUB DIMENSIONS
ABS
SIZE
A
B
C
D
11⁄2 1.9101.895 .687 .156
2 2.385 2.370 .750 .156
3 3.5153.4951.500 .218
4 4.5154.4951.750 .250
6 6.6476.6143.000 .281
PVC
SIZE
A
B
C
D
11⁄4 1.6751.650 .687 .156
11⁄2 1.9151.895 .687 .156
2 2.390 2.370 .750 .156
3 3.5203.4951.500 .218
4 4.5204.4951.750 .250
6 6.6476.6143.000 .281
8 8.6558.6104.000 .322
10 10.776 10.737 5.000 .365
12 12.778 12.736 6.000 .406
14 14.035 13.085 7.000 .437
16 16.045 15.980 8.000 .500
11
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 100
Coupling
SIZE
HUB X HUB
AB
1
11⁄4
⁄8 15⁄8
1
11⁄2 ⁄8 19⁄16
2 15⁄64 13⁄4
3 3⁄16 33⁄16
4 1⁄4 33⁄4
6 1⁄4 61⁄4
8 1⁄4 81⁄4
10 5⁄16 103⁄8
12 3⁄8137⁄16
14(F) 317
16(F)
3 3⁄8 19 3⁄8
PART NO. 101
Female Adapter
SIZE
FPT X HUB
A
1
11⁄2 ⁄4
2 1⁄4 3 5⁄16 4 11⁄32
6 1⁄4
8 1⁄4
10(F)
2 7⁄8
12(F)
3 3⁄16
PART NO. PVC 101X
Female Adapter with Cleanout Plug
FPT X HUB
SIZE
8**
10(F)
12(F)
See Part No. 101 and 106
Fabricated
** Assembled from two molded components
Note: Shading indicates available in PVC only.
(F)
12
PVC and ABS DWV Fittings
PART NO. 102
Pipe Increaser–Reducer
SIZE
HUB X HUB
AN
11⁄2 x 2
25⁄32 17⁄32
11⁄2 x 3
311⁄32 13⁄32
2 x 3
35⁄32 7⁄8
2 x 4
4
13⁄8
3
15
3 x 4
4 ⁄16 ⁄16
3 x 6
61⁄22
4 x 6
69⁄3213⁄4
4 x 8
71⁄2123⁄32
6 x 8
813⁄32 113⁄32
4 x 10**
1125⁄64 415⁄32
4 x 12**
4 x 14(F)
1993⁄4
(F)
4 x 16
205⁄8 101⁄4
6 x 10
927⁄3217⁄8
6 x 12**
133⁄8 43⁄8
(F)
6 x 14
6 x 16(F)
8 x 10
103⁄4 11⁄16
8 x 12
123⁄421⁄16
(F)
8 x 14
221⁄2 113⁄8
(F)
8 x 16
241⁄4 121⁄8
10 x 12
123⁄4 111⁄16
10 x 14(F)173⁄4 53⁄4
10 x 16(F)
2512
12 x 14(F)1611⁄16 33⁄16
12 x 16(F)203⁄4 67⁄16
14 x 16(F)197⁄8 47⁄16
Fabricated
** Assembled from two molded components
Note: Shading indicates available in PVC only.
(F)
13
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 103
Trap Adapter–Male, Less Washer &
Metal Nut
SIZE
11⁄2 x 11⁄4
11⁄2 2
SPIGOT X SLIP
A
⁄16
⁄16
3
⁄16
3
3
PART NO. 103P
Trap Adapter–Male, with Washer &
Polyethylene Nut
SIZE
11⁄2 x 11⁄4
11⁄2 2
SPIGOT X SLIP
A
⁄16
⁄16 3
⁄16
3
3
PART NO. PVC 103R
Trap Adapter–Male, with 11⁄2” Plastic Nut
& Washer & 11⁄2” x 11⁄4” Washer
SPIGOT X SLIP WITH PLASTIC NUT
SIZE
A
11⁄2 ⁄16 3
PART NO. 103W
Trap Adapter–Male, with Washer &
Plastic Nut
SPIGOT X SLIP WITH PLASTIC NUT
SIZE
A
11⁄2 x 11⁄4
11⁄2 2
⁄16
⁄16 3
⁄16
3
3
Note: Shading indicates available in PVC only.
14
PVC and ABS DWV Fittings
PART NO. 103X
Trap Adapter–Male, with Washer &
Chrome Nut
SIZE
11⁄2 x 11⁄4
11⁄2 2
SPIGOT X SLIP
A
⁄16
⁄16
3
⁄16
3
3
PART NO. 104
Trap Adapter–Female
NOTE: NOT A MALE ADAPTER.
HUB X SLIP
A
SIZE
11⁄2 x 11⁄4
11⁄2 ⁄16
⁄16 3
3
PART NO. 104P
Trap Adapter–Female, with Washer &
Plastic Nut
SIZE
11⁄2 x 11⁄4
11⁄2 HUB X SLIP
A
⁄16
⁄16 3
3
PART NO. ABS 104R*
Trap Adapter–Female, with 11⁄2” Plastic
Nut & Washer & 11⁄2” x 11⁄4” Washer
HUB X SLIP WITH PLASTIC NUT
SIZE
A
11⁄2 *
⁄16 3
* Available in ABS only
Note: Shading indicates available in PVC only.
15
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 104W
Trap Adapter–Female, with Washer &
Plastic Nut
HUB X SLIP WITH PLASTIC NUT
SIZE
A
11⁄2 x 11⁄4
11⁄2 ⁄16
⁄16 3
3
PART NO. 104X
Trap Adapter–Female, with Washer &
Chrome Nut
SIZE
11⁄4
11⁄2 x 11⁄4
11⁄2 HUB X SLIP
A
⁄16 ⁄16
3
⁄16 3
3
PART NO. 105
Fitting Cleanout Adapter
SIZE
SPIGOT X FPT
AB
3
11⁄4 ⁄16 3⁄4
1
5
1 ⁄2 ⁄32 5⁄8
2 5⁄32 5⁄8
3 7⁄32 3⁄4
4 1⁄4 7⁄8
6 5⁄1617⁄16
15
8(F)
⁄1621⁄4
15
10(F)
⁄1621⁄4
(F)
1
12 1 ⁄827⁄16
PART NO. 105X
Fitting Cleanout Adapter with
Cleanout Plug
SIZE
SPIGOT X FPT
A
For dimensions see part numbers 105 and 106.
Fabricated
Note: Shading indicates available in PVC only.
(F)
16
PVC and ABS DWV Fittings
PART NO. 106
Cleanout Plug
SIZE
MPT
AB
11⁄2 13⁄8 5⁄8 2 13⁄8 5⁄8
21⁄2 *11⁄2 3⁄4
3 13⁄4 3⁄4 4 17⁄8 7⁄8 6 21
8 23⁄8 13⁄8 10 27⁄1617⁄16
12 217⁄32 117⁄32
PART NO. 107
Flush Bushing
SIZE
SPIGOT X HUB
C
11⁄2 x 11⁄4 3⁄16
5
2 x 11⁄4
⁄16
1
5
2 x 1 ⁄2 ⁄16
3 x 11⁄2 1
7
3 x 2
⁄8
4 x 2
1 1 ⁄8
1
4 x 3
⁄2
3
6
x
4
1
⁄4
8 x 4
27⁄8
8 x 6
15⁄8
10 x 4**
10 x 6**
35⁄32
10 x 8
1 1 ⁄2
12 x 4**
55⁄32
12 x 6**
45⁄32
12 x 8
2 1 ⁄2
12 x 10
1 1 ⁄2
* Available in ABS only
** Assembled from two molded components
Note: Shading indicates available in PVC only.
17
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. PVC 107
Concentric Reducer Bushing
SIZE
SPIGOT X HUB
C
14 x 4(F)
8
14 x 6(F)
14 x 8(F)
14 x 10(F)95⁄8
14 x 12(F)73⁄8
16 x 4(F)
83⁄4
16 x 6(F)
91⁄4
(F) 16 x 8
101⁄4
(F)
16 x 10
107⁄8
16 x 12(F)105⁄8
16 x 14(F)
91⁄4
PART NO. PVC 108
Flush Bushing (Cleanout Adapter)
SIZE
SPIGOT X FPT
C
5
2 x 11⁄2 ⁄16
(CP)
8 x 6 15⁄8
10 x 8
11⁄2
12 x 8
113⁄16
PART NO. PVC 108X
Flush Bushing (Cleanout Adapter)
with Plug
SIZE
10 x 8
12 x 8
SPIGOT
ABC
F or dimensions see part numbers 106 & 108
Fabricated
PVC 108, 8”x6” is available only as a component part
of PVC 444X.
Note: Shading indicates available in PVC only.
(F)
(CP)
18
PVC and ABS DWV Fittings
PART NO. 109
Male Adapter
MPT X HUB
NOTE: NOT A TRAP ADAPTER. WILL NOT ACCEPT A TAIL PIECE.
SEE PART NUMBER 104
SIZE
A
11⁄4 11⁄4 x 11⁄2
11⁄2 2
3
4
⁄16
⁄16
3
⁄16 3
⁄16
3
⁄8
3
⁄8
3
(Octagon shoulders for
tightening purposes.)
3
PART NO. 110
Flush Cleanout Plug
SIZE
2
3
4
A
⁄8
⁄4
3
⁄4
5
3
PART NO. 111
Male Fitting Adapter
SIZE
MPT X SPIGOT
AB
11⁄2 113⁄16 3⁄4 11⁄2 x 11⁄4111⁄16 11⁄16
2 115⁄16 7⁄8
3 31⁄16 11⁄2
PART NO. PVC 113
Tray Plug Adapter
SIZE
HUB
AB
11⁄2 29⁄16
17
⁄32
Note: Shading indicates available in PVC only.
19
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. ABS 113S*
Tray Plug Adapter
SIZE
SPIGOT
AB
11⁄2 35⁄16
1
⁄4
PART NO. ABS 114*
Threaded Cap
FPT
SIZE
11⁄2 *
A
⁄4
3
PART NO. PVC 115
Adapter Coupling
SDR 35 HUB X DWV HUB
SIZE
A
8(F) 13⁄4 10(F)31⁄2
10 x 8(F)31⁄2
12(F)1
PART NO. 116
Cap
SIZE
SOCKET
AC
11⁄2 115⁄1615⁄16
2 25⁄3213⁄8
3 215⁄16129⁄32
4 31⁄821⁄32
6 43⁄435⁄8
8 613⁄324
10 73⁄45
12 97⁄166
14(F) 51⁄251⁄16
16(F) 53⁄451⁄4
* Available in ABS only
(F)
Fabricated
Note: Shading indicates available in PVC only.
20
PVC and ABS DWV Fittings
PART NO. 117
Adapter Coupling
(Adapts Sewer and Drain Spigot to DWV Spigot)
HUB X HUB
SIZE
A
3 x 3
4 x 3
4 x 4
⁄8
⁄4
1
⁄2
1
3
PART NO. PVC 117X
Adapter Coupling
(Adapts Sewer and Drain Spigot to DWV Hub)
HUB X SPG
SIZE
A
4 x 3
1
⁄4
PART NO. 118
Adapter Bushing
(Adapts DWV Hub to Sewer and Drain Spigot)
DWV SPIGOT X HUB
SIZE
AB
3
4
1
1
⁄413⁄4
⁄42
PART NO. 119
No-Hub Adapter
(Adapts Cast Iron No-Hub Spigot to DWV Spigot)
SPIGOT X HUB
SIZE
A
11⁄2127⁄32
2
123⁄32
2 x 11⁄2111⁄16
3
113⁄16
4
127⁄32
4 x 3
25⁄32
Note: Shading indicates available in PVC only.
21
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. PVC 120
Adapter Bushing
DWV SPIGOT X SDR 35 HUB
SIZE
A
8(F)
10(F)
12(F)
⁄8
⁄8
5
⁄8
5
5
PART NO. 122
Spigot Adapter, Cast Iron
(Adapts Cast Iron Spigot to DWV Spigot)
HUB X HUB
SIZE
A
2 x 2
3 x 3
4 x 4
⁄8
⁄16
1
⁄2
3
7
PART NO. 123
Hub Adapter, Cast Iron
(Adapts DWV Spigot to Cast Iron Hub)
HUB X SPIGOT
SIZE
A
2 x 2(P)323⁄32
3 x 3(P)45⁄64
4 x 4(P)425⁄64
PART NO. PVC 123R
Hub Adapter, Cast Iron, Increaser
(Adapts DWV Spigot to Cast Iron Hub)
HUB X SPIGOT
A
SIZE
11⁄2 x 2(P)31⁄2
3 x 4(P)4
Plain End: Joint can be made with compression
gasket only.
Fabricated
Note: Shading indicates available in PVC only.
(P)
(F)
22
PVC and ABS DWV Fittings
PART NO. 130
Repair Coupling
SIZE
HUB X HUB
A
11⁄215⁄8
2 17⁄8
3 33⁄16
4 33⁄4
6 61⁄4
8(F)83⁄16
10(F)103⁄16
12(F)123⁄16
PART NO. PVC 131
Test Cap(C1)
SIZE
11⁄2
2
3
4
A
⁄32
9
⁄32
5
⁄16
3
⁄8
9
PART NO. PVC 132
Outside Diameter Test Cap
SIZE
11⁄2
2
3
4
(C2)
A
⁄16
9
⁄16
9
⁄16
9
⁄16
9
Inserts into pipe
Inserts over pipe
Fabricated
Note: Shading indicates available in PVC only.
(C1)
(C2)
(F)
23
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 300
1/4 Bend
(Sanitary 90° Ell)
ALL HUB
SIZE
A
11⁄419⁄16
11⁄213⁄4
2 25⁄16
3 31⁄16
4 37⁄8
6 5
8 6
10 99⁄32
12 1023⁄32
14(F)163⁄4
16(F)189⁄16
PART NO. PVC 300A
Short 1/4 Bend
SIZE
(90° Ell)
ALL HUB
B
8(N)41⁄2
10(N)61⁄4
12(N)75⁄16
PART NO. 300R
1/4 Bend, Reducing
SIZE
ALL HUB
AB
2 x 11⁄227⁄1625⁄16
Fabricated
Not a sanitary pattern
Note: Shading indicates available in PVC only.
(F)
(N)
24
PVC and ABS DWV Fittings
PART NO. 300S
1/4 Bend with Side Inlet
SIZE
HUB X HUB
ABC
3 x 3 x 11⁄235⁄6417⁄8
3 x 3 x 2
35⁄6417⁄8
15
15
⁄16
⁄16
PART NO. PVC 301
Vent 1/4 Bend, Street
SIZE
HUB X SPIGOT
AB
8(F)41⁄2131⁄2
10(F)61⁄4183⁄4
12(F)75⁄161813⁄16
PART NO. 302
1/4 Bend, Street
(Sanitary 90° Street Ell)
SPIGOT X HUB
SIZE
AB
11⁄415⁄825⁄16
11⁄213⁄421⁄2
2 25⁄1633⁄16
3 31⁄16 49⁄16
4 37⁄8 55⁄8
6 53⁄1681⁄8
8 61⁄810
10(F)147⁄16193⁄4
12(F)163⁄819
14(F)161⁄4 239⁄16
16(F)197⁄8 237⁄16
Fabricated
Note: Shading indicates available in PVC only.
(F)
25
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 303
1/4 Bend, with Low Heel Inlet
SIZE
ALL HUB
AB
3 x 3 x 11⁄231⁄1643⁄16
3 x 3 x 2
31⁄1647⁄16 4 x 4 x 2
37⁄8 57⁄16
PART NO. 304
Long Sweep 1/4 Bend
SIZE
HUB X HUB
A
11⁄223⁄4
2 31⁄4
3 41⁄16
4 415⁄16
6 9
PART NO. PVC 305
Long Sweep 1/4 Bend
with High Heel Inlet
SIZE
3 x 3 x 2
ALL HUB
ABC
41⁄1655⁄821⁄4
Note: Shading indicates available in PVC only.
26
PVC and ABS DWV Fittings
PART NO. 307
Long Sweep 1/4 Bend
with Low Heel Inlet
SIZE
ALL HUB
AB
3 x 3 x 11⁄2*41⁄1643⁄4
3 x 3 x 2
41⁄16415⁄16
PART NO. 309
Long Sweep 1/4 Bend, Street
SIZE
HUB X SPIGOT
AB
11⁄223⁄4319⁄32
2 31⁄441⁄8
3 45⁄3259⁄16
4 415⁄16611⁄16
PART NO. 310
1/4 Bend, Street
with Low Heel Inlet
HUB X SPIGOT X HUB
SIZE
ABC
3 x 3 x 2
31⁄16515⁄16 49⁄16
PART NO. PVC 311
Long Sweep 1/4 Bend,
with Side Inlet
SIZE
3 x 3 x 2
ALL HUB
ABC
41⁄1613⁄813⁄4
* Available in ABS only
Note: Shading indicates available in PVC only.
27
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 319
1/6 Bend
SIZE
(60° Ell)
HUB X HUB
A
11⁄21
2 15⁄16
3 111⁄16
4 21⁄16
PART NO. 320
1/6 Bend, Street
(60° Street Ell)
HUB X SPIGOT
SIZE
AB
11⁄2
113⁄4
2 15⁄1623⁄16
3 111⁄1633⁄16
4 21⁄16313⁄16
PART NO. 321
1/8 Bend
SIZE
(45° Ell)
HUB X HUB
A
11⁄41
11⁄211⁄8
2 11⁄2
3 13⁄4
4 23⁄16
6 21⁄16
8 21⁄16
1031⁄8
12 331⁄64
14(F)81⁄4
16(F)105⁄16
Fabricated
Note: Shading indicates available in PVC only.
(F)
28
PVC and ABS DWV Fittings
PART NO. 323
1/8 Bend, Street
(45° Street Ell)
SPIGOT X HUB
SIZE
AB
11⁄4
113⁄4
1
1 ⁄211⁄817⁄8
2 11⁄223⁄8
3 13⁄431⁄4
4 23⁄16315⁄16
6 21⁄16515⁄64
8
263⁄32
10 31⁄885⁄32
12 331⁄6491⁄2
14(F)93⁄8159⁄16
16(F)105⁄16181⁄2
PART NO. 324
1/16 Bend
SIZE
(221⁄2° Ell)
HUB X HUB
A
1
11⁄2
⁄2
11
2 ⁄16
3 13⁄16
4 1
6 11⁄2
8 11⁄2
10 2
122
14(F)51⁄4
16(F)513⁄16
Fabricated
Note: Shading indicates available in PVC only.
(F)
29
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 326
1/16 Bend, Street
(221⁄2° Street Ell)
SPIGOT X HUB
SIZE
AB
1
11⁄2
⁄211⁄4
11
2 ⁄1611⁄2
3 13⁄1625⁄16
4
123⁄4
6 11⁄253⁄64
8(F)61⁄81015⁄16
10(F)511⁄16113⁄4
12(F)51⁄2141⁄16
14(F)69⁄16137⁄8
16(F)85⁄16163⁄4
PART NO. 327
Double 1/4 Bend
SIZE
ALL HUB
AB
11⁄213⁄413⁄4
2
25⁄1625⁄16
3
31⁄1631⁄16
2 x 11⁄2 x 11⁄2115⁄1623⁄16
Fabricated
Note: Shading indicates available in PVC only.
(F)
30
PVC and ABS DWV Fittings
PART NO. PVC 328
1/32 Bend
SIZE
HUB X HUB
A
8(F)51⁄8
10(F)57⁄8
12(F)511⁄16
PART NO. 329
Closet Bend, Reducing
SIZE
3 x 4
HUB X HUB
AB
3
33⁄8
PART NO. 330
Closet Bend, Reducing
SIZE
3 x 4
HUB X SPIGOT
AB
6
35⁄8
PART NO. ABS 330X*
Closet Bend, Reducing
with Test Cap
SIZE
3 x 4*
HUB X SPIGOT
AB
6
35⁄8
Fabricated
* Available in ABS only
Note: Shading indicates available in PVC only.
(F)
31
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 331
Vent Ell
(90° Short Turn Ell)
HUB X HUB
SIZE
A
11⁄213⁄16
2 11⁄2
3 17⁄8
PART NO. 333
Vent Ell, Street
(90° Short Turn Street Ell)
HUB X SPIGOT
SIZE
AB
11⁄217⁄32115⁄16
2 11⁄223⁄8
3 17⁄831⁄2
PART NO. 400
Sanitary Tee
SIZE
ALL HUB
AB
11⁄419⁄1625⁄16
11⁄213⁄423⁄4
2 25⁄16311⁄16
3 31⁄1647⁄8
4 37⁄861⁄8
6
581⁄2
8
6101⁄2
10(F)1613⁄32161⁄2
12(F)191⁄8191⁄2
Fabricated
Note: Shading indicates available in PVC only.
(F)
32
PVC and ABS DWV Fittings
PART NO. PVC 400A
Straight Tee
SIZE
ALL HUB
A BC E
8(N)
941⁄2 41⁄2 41⁄2
10(N)121⁄261⁄461⁄465⁄16
12(N)147⁄1677⁄3277⁄3271⁄4
14(N)(F)
21101⁄2101⁄2115⁄8
16(N)(F)237⁄81115⁄161115⁄16143⁄16
PART NO. 401
Sanitary Tee, Reducing
SIZE
ALL HUB
A B C
2 x 11⁄2 x 11⁄223⁄1631⁄8115⁄16
2 x 11⁄2 x 2
25⁄16311⁄1625⁄16
1
2 x 2 x 1 ⁄223⁄1631⁄8115⁄16
3 x 3 x 11⁄229⁄16211⁄1613⁄4
3 x 3 x 2
27⁄835⁄1621⁄8
4 x 4 x 11⁄231⁄431⁄162
4 x 4 x 2
35⁄1633⁄1621⁄16
4 x 4 x 3
39⁄1643⁄43
6 x 6 x 4
427⁄3263⁄64325⁄32
8 x 8 x 4**
81⁄4101⁄241⁄8
8 x 8 x 6**
73⁄41031⁄6463⁄64
Fabricated
Not a sanitary pattern
** Assembled from two molded components
Note: Shading indicates available in PVC only.
(F)
(N)
33
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. PVC 401A
Straight Tee, Reducing
SIZE
ALL HUB
A BC
8 x 8 x 4(N)**77⁄8 101⁄2 51⁄4
(N)
7
8 x 8 x 6 **6 ⁄8
101⁄2 51⁄4
10 x 10 x 4(N)**91⁄4103⁄853⁄16
10 x 10 x 6(N)** 8103⁄853⁄16
10 x 10 x 8(N)611⁄32103⁄853⁄16
12 x 12 x 4(N)***927⁄32 101⁄4 51⁄8
12 x 12 x 6(N)**829⁄32101⁄451⁄8
12 x 12 x 8(N)75⁄32101⁄451⁄8
12 x 12 x 10(N)73⁄16127⁄1667⁄32
(N)(F)
14 x 14 x 4
1011⁄16 10
5
(N)(F)
14 x 14 x 6
111⁄4 12
6
14 x 14 x 8(N)(F)115⁄81571⁄2
14 x 14 x 10(N)(F)12 17 81⁄2
14 x 14 x 12(N)(F)123⁄81991⁄2
(N)(F)
16 x 16 x 4
1215⁄16 103⁄8 53⁄16
16 x 16 x 6(N)(F)121⁄4 14
7
16 x 16 x 8(N)(F)125⁄816 8
16 x 16 x 10(N)(F)13 18 9
16 x 16 x 12(N)(F)137⁄16193⁄497⁄8
(N)(F)
16 x 16 x 14
1315⁄16 23 111⁄2
PART NO. 403
Sanitary Tee, Street
SPIGOT X HUB X HUB
SIZE
ABC
11⁄213⁄431⁄221⁄2
2 25⁄1649⁄1637⁄32
3
363⁄849⁄16
437⁄877⁄855⁄8
Fabricated
Not a sanitary pattern
** Assembled from two molded components
*** Assembled from three molded components
Note: Shading indicates available in PVC only.
(F)
(N)
34
PVC and ABS DWV Fittings
PART NO. 404
Sanitary Tee, Street Reducing
SPIGOT X HUB X HUB
SIZE
ABC
2 x 11⁄2 x 11⁄2*25⁄32 4227⁄32
2 x 11⁄2 x 2* 225⁄6441⁄237⁄32
2 x 2 x 11⁄221⁄8427⁄8
3 x 3 x 11⁄229⁄1643⁄1631⁄4
3 x 3 x 2
27⁄843⁄435⁄8
4 x 4 x 2
35⁄16415⁄16313⁄16
PART NO. PVC 410
Tee Cross
SIZE
ALL HUB
A B C
6 x 6 x 4 x 4(F)511⁄16 91⁄4 45⁄8
6 x 6 x 6 x 6(F)61⁄8103⁄453⁄8
8 x 8 x 4 x 4(F)65⁄16 87⁄8 47⁄16
8 x 8 x 6 x 6(F)77⁄8511⁄1671⁄4
8 x 8 x 8 x 8(F)85⁄16 131⁄8 69⁄16
10 x 10 x 4 x 4(F)73⁄4 12
6
10 x 10 x 6 x 6(F)81⁄2 111⁄2 53⁄4
10 x 10 x 8 x 8(F)87⁄8131⁄263⁄4
10 x 10 x 10 x 10(F)8 183⁄8 93⁄16
12 x 12 x 4 x 4(F)87⁄8 10
5
12 x 12 x 6 x 6(F)93⁄412 6
12 x 12 x 8 x 8(F)97⁄8153⁄477⁄8
12 x 12 x 10 x 10(F)101⁄416 8
12 x 12 x 12 x 12(F)91⁄8 21101⁄2
Fabricated
* Available in ABS only
Note: Shading indicates available in PVC only.
(F)
35
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 416
Sanitary Tee with Left Side Inlet
SIZE
ALL HUB
ABC
3 x 3 x 3 x 11⁄231⁄1647⁄8311⁄16
3 x 3 x 3 x 2
31⁄1647⁄8311⁄16
4 x 4 x 4 x 2
37⁄861⁄85
PART NO. 417
Sanitary Tee with Right Side Inlet
SIZE
ALL HUB
ABC
3 x 3 x 3 x 11⁄231⁄1647⁄8311⁄16
3 x 3 x 3 x 2
31⁄1647⁄8311⁄16
4 x 4 x 4 x 2
37⁄861⁄85
PART NO. PVC 418
Sanitary Tee with Left & Right Side Inlets
SIZE
ALL HUB
ABC
3 x 3 x 3 x 2 x 2 31⁄1647⁄8311⁄16
4 x 4 x 4 x 2 x 2 37⁄861⁄85
Note: Shading indicates available in PVC only.
36
PVC and ABS DWV Fittings
PART NO. 428
Double Sanitary Tee
(Sanitary Cross)
ALL HUB
SIZE
AB
11⁄213⁄423⁄4
2 25⁄16311⁄16
3 31⁄1647⁄8
4 37⁄861⁄8
PART NO. 429
Double Sanitary Tee, Reducing
(Sanitary Cross)
ALL HUB
SIZE
ABC
2 x 2 x 11⁄2 x 11⁄223⁄1631⁄8115⁄16
3 x 3 x 11⁄2 x 11⁄229⁄16211⁄1613⁄4
3 x 3 x 2 x 2
27⁄835⁄1621⁄8
4 x 4 x 2 x 2
35⁄1633⁄1621⁄16
4 x 4 x 3 x 3
39⁄1643⁄43
PART NO. PVC 431
Double Sanitary Tee
Street, Reducing
(Sanitary Cross)
SPIGOT X HUB X HUB X HUB
SIZE
ABC
3 x 3 x 11⁄2 x 11⁄229⁄1643⁄1631⁄4
Note: Shading indicates available in PVC only.
37
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. PVC 438
Double Sanitary Tee with Side Inlet
SIZE
(Sanitary Cross)
ALL HUB
ABC
3 x 3 x 3 x 3 x 2 31⁄1647⁄8311⁄16
4 x 4 x 4 x 4 x 2 37⁄861⁄85
PART NO. PVC 439
Double Sanitary Tee
with Left & Right Side Inlets
(Sanitary Cross)
ALL HUB
SIZE
ABC
3x3x3x3x2x2 31⁄1647⁄8311⁄16
4x4x4x4x2x2 37⁄861⁄85
PART NO. 441
Vent Tee
SIZE
ALL HUB
AB
11⁄213⁄1623⁄8
2 11⁄23
3 17⁄833⁄4
4 21⁄25
Note: Shading indicates available in PVC only.
38
PVC and ABS DWV Fittings
PART NO. 444X
Cleanout Tee with Cleanout Plug
SIZE
HUB X HUB X FPT
ABC
11⁄2115⁄1623⁄813⁄16
2
21⁄4311⁄2
3
211⁄1637⁄8115⁄16
4
33⁄851⁄829⁄16
6
484
6 x 6 x 4**
8
8
4
8
51⁄4 101⁄2 55⁄32
8 x 8 x 4(F)73⁄4 91⁄4 45⁄8
8 x 8 x 6***
81⁄4111⁄455⁄8
10(F)123⁄4 121⁄2 61⁄4
10 x 10 x 4(F)87⁄8 93⁄4 47⁄8
10 x 10 x 6(F)105⁄8 113⁄4 57⁄8
10 x 10 x 8
103⁄8103⁄853⁄16
12(F)133⁄8 141⁄2 71⁄4
12 x 12 x 4(F)911⁄16 10
5
12 x 12 x 6** 95⁄16121⁄861⁄16
12 x 12 x 8
115⁄32101⁄461⁄32
12 x 12 x 10(F)135⁄16121⁄261⁄4
Fabricated
** Assembled from two molded components
*** Assembled from three molded components
Note: Shading indicates available in PVC only.
(F)
39
See Part No. 106
for plug dimensions.
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 445
Cleanout Tee
SIZE
HUB X HUB X FPT
ABC
11⁄2115⁄1623⁄813⁄16
2
21⁄4311⁄2
3
211⁄1637⁄8115⁄16
4
33⁄851⁄829⁄16
6
484
8
51⁄4101⁄255⁄32
8 x 8 x 4(F)73⁄491⁄445⁄8
8 x 8 x 6(F)81⁄4111⁄455⁄8
10(F)123⁄4121⁄261⁄4
10 x 10 x 4(F)811⁄16113⁄457⁄8
10 x 10 x 6(F)105⁄8113⁄457⁄8
10 x 10 x 8
103⁄8103⁄853⁄16
12(F)133⁄8141⁄271⁄4
12 x 12 x 4(F)911⁄1610 5
12 x 12 x 6(F)95⁄16121⁄861⁄16
12 x 12 x 8
115⁄32101⁄461⁄32
12 x 12 x 10(F)135⁄16121⁄261⁄4
PART NO. 445X
Flush Cleanout Tee with Cleanout Plug
For dimensions see Part Numbers 445 and 110.
Fabricated
Note: Shading indicates available in PVC only.
(F)
40
PVC and ABS DWV Fittings
PART NO. PVC 447
Horizontal Twin Tee
SIZE
3 x 3 x 11⁄2 x 11⁄2
ALL HUB
ABCD
⁄813⁄413⁄3229⁄16
7
PART NO. 448
Two-Way Cleanout
SIZE
ALL HUB
A
3 41⁄16
4415⁄16
PART NO. PVC 449
Sanitary Tee with 2” Left Hand
Sanitary Inlet on Center
SIZE
ALL HUB
AB
2 25⁄16311⁄16
PART NO. 500
Double Fixture Fitting
SIZE
ALL HUB
ABC
2
31⁄245⁄841⁄4
1
1
1
2 x 1 ⁄2 x 1 ⁄2 x 1 ⁄227⁄831⁄231⁄8
2 x 11⁄2 x 2 x 2*
31⁄245⁄841⁄4
2 x 2 x 11⁄2 x 11⁄227⁄831⁄231⁄8
3
415⁄1663⁄4 61⁄4
3 x 2 x 3 x 3*
415⁄16615⁄1661⁄4
* Available in ABS only
Note: Shading indicates available in PVC only.
41
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 501
Combination Wye & 1/8 Bend
SIZE
(One Piece)
ALL HUB
ABC
11⁄2315⁄1631⁄2315⁄16
2 51⁄847⁄1651⁄8
3 79⁄1661⁄279⁄16
4
1081⁄210
PART NO. 502
Combination Wye & 1/8 Bend,
Reducing
SIZE
(One Piece)
ALL HUB
ABC
2 x 11⁄2 x 11⁄243⁄1631⁄2315⁄16
2 x 2 x 11⁄243⁄1631⁄2315⁄16
3 x 3 x 11⁄243⁄431⁄2315⁄16
3 x 3 x 2
511⁄1647⁄1651⁄8
4 x 4 x 2
61⁄841⁄251⁄8
4 x 4 x 3
81⁄1661⁄279⁄16
PART NO. PVC 503
Combination Wye & 1/8 Bend
SIZE
(Two Pieces)
ALL HUB
ABC
6**§1115⁄32101⁄8119⁄64
8**§1419⁄32141⁄81423⁄32
10**§181⁄2161⁄2181⁄4
12**§211⁄2191⁄2211⁄2
14(F)∞
16(F)∞
Fabricated
** Assembled from two molded components
§ Fitting shipped with any required bushing(s) installed,
street bend strapped to fitting; assembled from
molded components.
∞ Fitting shipped with street bend strapped to fitting.
Note: Shading indicates available in PVC only.
(F)
42
PVC and ABS DWV Fittings
PART NO. PVC 504
Combination Wye & 1/8 Bend,
Reducing
SIZE
(Two Pieces)
ALL HUB
ABC
6 x 6 x 3§93⁄871⁄16719⁄32
6 x 6 x 4(1)87⁄887⁄16713⁄16
8 x 8 x 4§
13107⁄16113⁄4
§
8 x 8 x 6 121⁄2107⁄16113⁄16
10 x 10 x 4§163⁄16141⁄41527⁄64
10 x 10 x 6§1531⁄32141⁄4159⁄64
10 x 10 x 8§157⁄16141⁄41425⁄32
12 x 12 x 4§163⁄4131⁄21511⁄32
12 x 12 x 6§167⁄16131⁄2155⁄64
12 x 12 x 8§163⁄321317⁄32145⁄8
12 x 12 x 10§1915⁄32171⁄16183⁄16
(F)∞
14 x 14 x 4
(F)∞
14 x 14 x 6
14 x 14 x 8(F)∞
14 x 14 x 10(F)∞
14 x 14 x 12(F)∞
(F)∞
16 x 16 x 4
16 x 16 x 6(F)∞
16 x 16 x 8(F)∞
16 x 16 x 10(F)∞231⁄4 232215⁄16
16 x 16 x 12(F)∞
(F)∞
16 x 16 x 14
Fabricated
One piece short pattern
§ Fitting shipped with any required bushing(s) installed,
street bend strapped to fitting; assembled from
molded components.
∞ Fitting shipped with street bend strapped to fitting.
Note: Shading indicates available in PVC only.
(F)
(1)
43
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. PVC 507
Double Combination Wye & 1/8 Bend
(Three Pieces or Five Pieces)
ALL HUB
A BC
SIZE
4
913⁄3281⁄495⁄32
1
1
2 x 2 x 1 ⁄2 x 1 ⁄247⁄843⁄8415⁄16
3 x 3 x 2 x 2
65⁄64415⁄16511⁄64
4 x 4 x 2 x 2
75⁄165 6
4 x 4 x 3 x 3
819⁄6465⁄8719⁄32
§
6 x 6 x 4 x 4 1121⁄32101⁄8103⁄16
PART NO. PVC 515
Combination Wye & 1/8 Bend
with Left Side Inlet
SIZE
A
ALL HUB
B
C
D
E
3 x 3 x 3 x 2 65⁄16731⁄6451⁄433⁄817⁄8
PART NO. PVC 516
Combination Wye & 1/8 Bend
with Right Side Inlet
SIZE
A
ALL HUB
B C
D
E
3 x 3 x 3 x 2 65⁄16731⁄6451⁄433⁄817⁄8
§ Fitting shipped with any required bushing(s) installed,
street bend strapped to fitting; assembled from
molded components.
Note: Shading indicates available in PVC only.
44
PVC and ABS DWV Fittings
PART NO. PVC 517
Combination Wye & 1/8 Bend
with Left & Right Side Inlets
SIZE
A
ALL HUB
B C
D
E
3x3x3x2x2 65⁄16731⁄6451⁄433⁄817⁄8
PART NO. 600
SIZE
Wye
(45° Wye)
ALL HUB
ABC
11⁄435⁄811⁄1629⁄16
11⁄2
411⁄827⁄8
2
513⁄835⁄8
3 65⁄815⁄85
4 81⁄417⁄863⁄8
6 101⁄813⁄487⁄16
8 141⁄8 23⁄8 113⁄4
10 161⁄227⁄8135⁄8
12 197⁄16311⁄3216
14(F)313⁄8 8221⁄4
16(F)365⁄16103⁄4253⁄16
Fabricated
Note: Shading indicates available in PVC only.
(F)
45
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 601
Wye, Reducing
SIZE
(45° Wye)
ALL HUB
ABC
2 x 11⁄2 x 11⁄231⁄211⁄16215⁄16
2 x 11⁄2 x 2
41⁄2 137⁄16
1
2 x 2 x 1 ⁄243⁄811⁄1637⁄16
3 x 3 x 11⁄241⁄4 1⁄245⁄16
7
3 x 3 x 2
5
⁄845⁄8
4 x 4 x 11⁄2 506
4 x 4 x 2
51⁄16 3⁄859⁄16
4 x 4 x 3
65⁄811⁄166
6 x 6 x 3
71⁄16 1⁄471⁄2
6 x 6 x 4
67⁄8 3⁄1671⁄2
8 x 8 x 4**
107⁄161119⁄16
8 x 8 x 6
107⁄161913⁄16
10 x 10 x 4** 141⁄4 13⁄8 1515⁄16
10 x 10 x 6** 141⁄4 13⁄8 15
10 x 10 x 8
141⁄413⁄8131⁄16
12 x 12 x 4** 131⁄2 1⁄2 1623⁄32
12 x 12 x 6** 131⁄2 1⁄2 1529⁄64
12 x 12 x 8
1319⁄32 1⁄2137⁄8
12 x 12 x 10 171⁄1617⁄8153⁄32
14 x 14 x 4(F)123⁄8 137⁄64 1523⁄64
14 x 14 x 6(F)1551⁄64 15⁄64 1837⁄64
14 x 14 x 8(F)1549⁄6431⁄641651⁄64
14 x 14 x 10(F)1857⁄64343⁄641829⁄32
14 x 14 x 12(F)257⁄859⁄1620
16 x 16 x 4(F)1211⁄1619⁄16151⁄4
16 x 16 x 6(F)153⁄4 3⁄16173⁄16
16 x 16 x 8(F)187⁄1619⁄16183⁄8
16 x 16 x 10(F)2331⁄2195⁄8
16 x 16 x 12(F)263⁄841⁄2213⁄4
16 x 16 x 14(F)271⁄251⁄4239⁄16
Fabricated
** Assembled from two molded components.
Note: Shading indicates available in PVC only.
(F)
46
PVC and ABS DWV Fittings
PART NO. 602
Wye, Street
(45° Wye)
SPIGOT X HUB X HUB
SIZE
A BC
11⁄243⁄417⁄827⁄8
2 57⁄821⁄435⁄8
3 81⁄831⁄85
4 915⁄1635⁄861⁄4
PART NO. 603
Wye, Street, Reducing
(45° Wye)
SPIGOT X HUB X HUB
SIZE
ABC
3 x 3 x 11⁄253⁄4 247⁄32
3 x 3 x 2
61⁄223⁄845⁄8
4 x 4 x 2
623⁄3221⁄8515⁄64
4 x 4 x 3
83⁄8213⁄166
PART NO. 611
Double Wye
(Double 45° Wye)
ALL HUB
SIZE
ABC
11⁄2
411⁄827⁄8
2
513⁄835⁄8
3 65⁄815⁄85
4 81⁄417⁄863⁄8
6 103⁄1613⁄487⁄16
8(F)191⁄1647⁄8135⁄8
10(F)221⁄16511⁄16161⁄4
12(F)195⁄1667⁄8257⁄8
14(F)287⁄1671⁄8203⁄8
Fabricated
Note: Shading indicates available in PVC only.
(F)
47
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. PVC 611S
Double Wye with 2” Side Inlet
SIZE
3x3x3x2
(Double 45° Wye)
ALL HUB
ABCD
65⁄815⁄8513⁄4
PART NO. 612
Double Wye, Reducing
(Double 45° Wye)
ALL HUB
SIZE
A BC
2 x 2 x 11⁄2 x 11⁄243⁄811⁄1637⁄16
1
3 x 3 x 11⁄2 x 11⁄241⁄4
⁄245⁄16
15
7
3 x 3 x 2 x 2
4 ⁄16
⁄845⁄8
3
4 x 4 x 2 x 2
5
⁄859⁄16
5
1
4 x 4 x 3 x 3
6 ⁄81 ⁄166
6 x 6 x 4 x 4**
101⁄813⁄4103⁄16
8 x 8 x 4 x 4(F)101⁄16 13⁄161013⁄16
8 x 8 x 6 x 6(F)
1311⁄2125⁄8
(F)
10 x 10 x 4 x 4 113⁄1627⁄1614
3
10 x 10 x 6 x 6(F)1415⁄16
⁄4
145⁄8
(F)
7
10 x 10 x 8 x 8 183 ⁄16151⁄16
12 x 12 x 4 x 4(F)1113⁄161 14
12 x 12 x 6 x 6(F)1511⁄16 7⁄16 171⁄8
12 x 12 x 8 x 8(F)187⁄8 33⁄16 161⁄2
12 x 12 x 10 x 10(F)2111⁄16 37⁄8 181⁄16
14 x 14 x 4 x 4(F)
14 x 14 x 6 x 6(F)15
1
163⁄16
14 x 14 x 8 x 8(F) 1927⁄161719⁄32
14 x 14 x 10 x 10(F)217⁄8 4183⁄4
(F)
3
7
14 x 14 x 12 x 12 25 ⁄16519 ⁄8
(F)
16 x 16 x 4 x 4 16 x 16 x 6 x 6(F)159⁄16 17⁄32 1721⁄32
16 x 16 x 8 x 8(F)183⁄4
11⁄2 183⁄16
16 x 16 x 10 x 10(F)219⁄16 19⁄16 205⁄8
16 x 16 x 12 x 12(F)2611⁄1647⁄16213⁄4
(F)
16 x 16 x 14 x 14 Fabricated
** Assembled from two molded components.
Note: Shading indicates available in PVC only.
(F)
48
PVC and ABS DWV Fittings
PART NO. PVC 625
Wye with Left Side Inlet
ALL HUB
SIZE ABCDE
3 x 3 x 3 x 2 65⁄815⁄8 521⁄413⁄4
4 x 4 x 4 x 2 81⁄417⁄863⁄821⁄235⁄16
PART NO. PVC 626
Wye with Right Side Inlet
SIZE
A
ALL HUB
B C
D
E
3 x 3 x 3 x 2 65⁄815⁄8521⁄413⁄4
4 x 4 x 4 x 2 81⁄417⁄863⁄821⁄235⁄16
PART NO. 700
Return Bend
SIZE
HUB X HUB
ABC
11⁄231⁄213⁄413⁄4
2 57⁄3223⁄823⁄8
3 63⁄431⁄1631⁄16
4 81⁄2311⁄16311⁄16
Note: Shading indicates available in PVC only.
49
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. ABS 704P*
Tail Piece Adapter with Plastic Nut &
Packing Ring
SIZE
SPIGOT X SLIP
A
11⁄2(C)23⁄16
PART NO. 706X
P-Trap with Solvent Weld Joint
SIZE
HUB X HUB
ABC
11⁄245⁄8315⁄1613⁄4
2 613⁄1647⁄823⁄8
3 815⁄16615⁄1631⁄16
4 111⁄1687⁄16311⁄16
PART NO. 707X
P-Trap with Cleanout & Solvent
Weld Joint
SIZE
HUB X HUB
ABC
11⁄245⁄8315⁄1613⁄4
2 613⁄1647⁄823⁄8
PART NO. 708P
P-Trap with Union & Plastic Nut
SIZE
HUB X HUB
ABC
11⁄449⁄1631⁄213⁄8
11⁄245⁄8315⁄1613⁄4
2 613⁄1647⁄823⁄8
* Available in ABS only; contact sales office for availability.
(C)
Contact sales office for availability.
Note: Shading indicates available in PVC only.
50
PVC and ABS DWV Fittings
PART NO. 708X
P-Trap with Union & Chrome Nut
SIZE
HUB X HUB
ABC
11⁄245⁄8315⁄1613⁄4
PART NO. PVC 709X
P-Trap with Cleanout, Union &
Chrome Nut
SIZE
HUB X HUB
ABC
11⁄245⁄8315⁄1613⁄4
PART NO. PVC 710
Low Profile P-Trap with Solvent Weld
SIZE
HUB X HUB
ABC
2 613⁄1649⁄1623⁄8
PART NO. 711P
L.A. Pattern P-Trap with Union &
Polyethylene Nut
SIZE
SLIP X HUB
ABC
11⁄245⁄8315⁄1633⁄4
PART NO. 711W
L.A. Pattern P-Trap with Union &
Plastic Nut
SIZE
SLIP X HUB
ABC
11⁄245⁄8315⁄1633⁄4
Note: Shading indicates available in PVC only.
51
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. PVC 711X
L.A. Pattern P-Trap with Union &
Chrome Nut
SIZE
SLIP X HUB
ABC
11⁄245⁄8315⁄1633⁄4
PART NO. 720X
Drum Trap
SIZE
HUB X HUB
AB
3 x 6 x 11⁄2413⁄16 111⁄16
PART NO. 800 & 800K
Closet Flange
SIZE
HUB END
ABC
4 x 3
7
4 x 4◊7
11⁄4
11⁄4
⁄16
⁄16
7
7
PART NO. ABS 800S*
Closet Flange with Stop
SIZE
4 x 3*
HUB END
ABCD
7
21⁄4
⁄16 7
11⁄2
PART NO. 801
Closet Flange, Reducing
SIZE
4 x 3
SPIGOT
ABCD
7
23⁄4 121⁄32
◊ 800K, 4”x4” not available in ABS
* Available in ABS only
Note: Shading indicates available in PVC only.
52
⁄16
7
PVC and ABS DWV Fittings
PART NO. PVC 810K
Closet Flange, Adjustable with Plastic Ring
SIZE
4 x 3
HUB END
ABC
7
11⁄8
7
⁄16
PART NO. ABS 811P*
Closet Flange, Adjustable with Plastic Ring
SIZE
4 x 3*
4 x 4*
HUB END
ABC
7
7
11⁄8
11⁄8
7
7
⁄16
⁄16
PART NO. 811
Closet Flange, Adjustable with Metal Ring
SIZE
4 x 3
4 x 4
HUB END
ABC
7
7
11⁄4
11⁄8
1
1
⁄4
⁄4
PART NO. PVC 811K
Closet Flange, Adjustable with Metal Ring
SIZE
4 x 3
HUB END
ABC
7
11⁄4
1
⁄4
PART NO. 812
Closet Flange, Adjustable with Metal Ring
SIZE
4 x 3
4 x 4
SPIGOT
ABC
7
7
25⁄8
25⁄8
1
1
⁄4
⁄4
* Available in ABS only
Note: Shading indicates available in PVC only.
53
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
PVC and ABS DWV Fittings
PART NO. 812P
Closet Flange, Adjustable with Plastic Ring
SIZE
4 x 3
4 x 4
SPIGOT
ABC
7
7
25⁄8
25⁄8
7
7
⁄16
⁄16
PART NO. 815
Flush Closet Flange
(Fits Over 3” Pipe or Inside 4” Pipe)
HUB
SIZE
ABC
4 x 4 / 4 x 3
7
27⁄8
⁄16
7
PART NO. 815K
Flush Closet Flange with Knockout
(Fits Over 3” Pipe or Inside 4” Pipe)
HUB
ABC
SIZE
4 x 4 / 4 x 3
7
27⁄32
⁄16
7
PART NO. 820
Offset Closet Flange, Adjustable with
Metal Ring
SIZE
4 x 3
(11⁄2” Offset)
HUB
A B C
7
45⁄16
1
D
E
⁄411⁄225⁄16
PART NO. 820P
Offset Closet Flange , Adjustable with
Plastic Ring
SIZE
4 x 3
(1 1⁄2” Offset)
HUB
A B C
7
45⁄16
7
D
E
⁄1611⁄225⁄16
Note: Shading indicates available in PVC only.
54
PVC and ABS DWV Fittings
PART NO. ABS 824*
Closet Flange, Adjustable with Metal Ring
& 4” Extended Spigot
SIZE
4*
SPIGOT
ABC
7
411⁄16
1
⁄4
PART NO. ABS 900*
Swivel Tray Plug Adapter
with Washer
SIZE
SPG X FPT
AB
11⁄2*123⁄32
15
⁄32
PART NO. ABS 900X*
Swivel Tray Plug Adapter
with Washer, Extended
SIZE
SPG X FPT
AB
11⁄2*27⁄16
15
⁄32
PART NO. ABS 910*
Swivel Tray Plug Adapter
with Washer
SIZE
H X FPT
AB
11⁄2*113⁄16
15
⁄32
* Available in ABS only
55
P
V
C
&
A
B
S
D
W
V
F
I
T
T
I
N
G
S
Pipe Data
Thin Wall PVC DWV Pipe
PVC Thin Wall Schedule 30 Pipe
PVC SCHEDULE 30 (White)
PLAIN END
ASTM D 2949
MIN.
WT. PER
PART NO.
NOM. SIZE
UPC #
QTY. PER AVG. OD WALL 100 FT.
611942-SKID (IN.) (IN.) (LBS.)
PVC 93003”x10’039631250’3.25 .125 80.2
Weight is approximate and is for shipping purposes only.
Pipe listed in this section meets or exceeds the requirements of ASTM D 2949.
All products manufactured by Charlotte
Pipe and Foundry Company are proudly
made in the U.S.A.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.
56
PVC Thin Wall Schedule 30 Fittings
HUB DIMENSIONS
PVC Thin Wall SCH 30 Fittings
Hub Dimensional Tolerances
SIZE
A
B
C
D
3.2653.2451.5000.140
3.25 O.D.
±.008 ±.008 MIN. MIN.
IPS Hub Dimensional Tolerances
SIZE
A
B
C
D
11⁄ 1.9151.894 0.7500.156
2
+.010/-.005±.006 MIN. MIN.
2 2.3902.369 0.8750.156
+.010/-.005±.006 MIN. MIN.
3 3.5203.498 1.5000.218
+.010/-.005±.008 MIN. MIN.
4 4.5204.491 1.5000.250
+.010/-.005±.009 MIN. MIN.
57
T
H
I
N
W
A
L
L
P
V
C
D
W
V
PVC Thin Wall Schedule 30 Fittings
PART NO. PVC 1100
Coupling
SIZE
3
HUB X HUB
ABC
⁄16
3
37⁄32 117⁄32
PART NO. PVC 1101
Female Adapter
SIZE
3
FTP X HUB
ABC
⁄16
3
11⁄2 117⁄32
PART NO. PVC 1102
Pipe Increaser-Reducer
SIZE
11⁄2 x 3
2 x 3
4 x 3
HUB X HUB
ABCN
23⁄4 3⁄4
23⁄4 7⁄8
47⁄32 19⁄16
11⁄2
11⁄2
13⁄4
PART NO. PVC 1105X
Fitting Cleanout Adapter
with Cleanout Plug
SPIGOT
AB
SIZE
3
7
⁄32 117⁄32
PART NO. PVC 1109
Male Adapter
SIZE
3
MPT X HUB
ABC
5
⁄16
11⁄2
11⁄2
58
11⁄4
11⁄4
27⁄32
PVC Thin Wall Schedule 30 Fittings
PART NO. PVC 1112
Reducer Bushing
SIZE
HUB X SPIGOT
ABC
3 x 11⁄225⁄16
3 x 2
27⁄16
4 x 3
21⁄8
11⁄2
11⁄2
13⁄4
⁄4
⁄32
15⁄8
3
29
PART NO. PVC 1116
Cap
SOCKET
AC
SIZE
3 25⁄16 115⁄16
T
H
I
N
PART NO. PVC 1117
W
A
L
L
Adapter Coupling
(Adapts S&D Hub to DWV Hub)
SPIGOT X SPIGOT
SIZE
A
⁄16
P
V
C
PART NO. PVC 1129
D
W
V
4 x 3
9
Hub Adapter
(Adapts 3” IPS Hub to 3” Thin Wall Pipe)
SPIGOT X HUB
SIZE
AB
3 x 3
11⁄2 125⁄32
PART NO. PVC 1130
Repair Coupling
SIZE
HUB X HUB
A
3 33⁄16
59
PVC Thin Wall Schedule 30 Fittings
PART NO. PVC 1300
1/4 Bend
SIZE
HUB X HUB
AB
3 27⁄8 117⁄32
PART NO. PVC 1302
1/4 Bend, Street
SIZE
SPIGOT X HUB
ABC
3 27⁄8
49⁄32 117⁄32
PART NO. PVC 1319
1/6 Bend
SIZE
HUB X HUB
A
3 11⁄2
PART NO. PVC 1321
1/8 Bend
SIZE
HUB X HUB
AB
3 11⁄32 117⁄32
PART NO. PVC 1323
1/8 Bend, Street
SIZE
3
SPIGOT X HUB
ABC
11⁄32 217⁄32 117⁄32
60
PVC Thin Wall Schedule 30 Fittings
PART NO. PVC 1324
1/16 Bend
HUB X HUB
A
SIZE
3
11
⁄16
PART NO. PVC 1400
Sanitary Tee
SIZE
3
HUB X HUB
ABC
231⁄32 41⁄2 117⁄32
T
H
I
N
PART NO. PVC 1401
Sanitary Tee, Reducing
SIZE
3 x 11⁄2
3 x 2
A
HUB X HUB
B C
D
29⁄16 211⁄16 111⁄16 11⁄2
27⁄32 33⁄8 131⁄32 11⁄2
E
3
7
⁄4
⁄8
Sanitary Tee with Right & Left Side Inlets
ALL HUB
A B C
3 x 3 x 3 x 11⁄2 x 11⁄2215⁄16
3 x 3 x 3 x 2 x 2
215⁄16
P
V
C
D
W
V
PART NO. PVC 1418
SIZE
W
A
L
L
413⁄32 215⁄16
413⁄32 215⁄16
61
PVC Thin Wall Schedule 30 Fittings
PART NO. PVC 1429
Double Sanitary Tee, Reducing
SIZE
3 x 11⁄2
A
HUB X HUB
B C
D
21⁄4 221⁄32 125⁄32 117⁄32
E
25
⁄32
PART NO. PVC 1444X
Cleanout Tee with Cleanout Plug
SIZE
3
HUB X HUB X FTP
ABC
23⁄4
33⁄4
17⁄8
See Part No. 106
for plug dimensions.
PART NO. PVC 1600
Wye
HUB X HUB
ABCD
SIZE
3
47⁄8
3
⁄4
41⁄8 117⁄32
PART NO. PVC 1601
Wye, Reducing
SIZE
A
3 x 11⁄2 311⁄16
3 x 2
311⁄16
HUB X HUB
B C
⁄8
1
⁄4
3
D
31⁄2 117⁄32
43⁄8 117⁄32
E
25
7
⁄32
⁄8
PART NO. PVC 1611
Double Wye
SIZE
3
HUB X HUB
ABCD
429⁄32
13
⁄16
41⁄8 117⁄32
62
PVC Thin Wall Schedule 30 Fittings
PART NO. PVC 1800
Closet Flange
SIZE
4 x 3
HUB
ABCD
7
11⁄4
7
⁄16
19⁄16
PART NO. PVC 1800K
Closet Flange
SIZE
4 x 3
HUB
ABCD
7
11⁄4
7
⁄16
19⁄16
PART NO. PVC 1811
Closet Flange, Adjustable with Metal Ring
SIZE
4 x 3
HUB
ABCD
63⁄4
11⁄4
1
⁄4
11⁄2
Closet Flange, Adjustable with Metal Ring
4 x 3
SPIGOT
ABCD
63⁄4
W
A
L
L
P
V
C
D
W
V
PART NO. PVC 1812
SIZE
T
H
I
N
11⁄4
1
⁄4
63
11⁄2
Certification
This is to certify that all Plastic Pipe and Fittings manufactured
by Charlotte Pipe and Foundry Company are manufactured in the
United States and conform to the following standards:
PVC SCH. 40 SOLID WALL PIPE
ASTM D 1784, ASTM D 1785, ASTM D 2665
FHA UM 79a
FEDERAL SPECIFICATION L-P-320a
NSF STANDARD NO. 14 AND 61
PVC SCH. 40 DWV CELLULAR CORE PIPE
ASTM D 4396, ASTM F 891
NSF STANDARD NO. 14
RePVC ® SCH. 40 DWV PIPE
ASTM D 4396, ASTM F 1760
NSF STANDARD NO. 14
PVC SCH. 40 DWV FITTINGS
ASTM D 1784, ASTM D 2665, ASTM D 3311, ASTM F 1866
FHA UM 79a
FEDERAL SPECIFICATION L-P-320a
NSF STANDARD NO. 14
PVC SDR-21 AND SDR-26 PRESSURE PIPE
ASTM D 1784, ASTM D 2241
NSF STANDARD NO. 14 AND 61
PVC SCH. 40 PRESSURE FITTINGS
ASTM D 1784, ASTM D 2466
NSF STANDARD NO. 14 AND 61
PVC SCH. 40 WELL CASING PIPE
ASTM D 1784, ASTM F 480
NSF STANDARD NO. 14 AND 61
PVC SCH. 80 PIPE
ASTM D 1784, ASTM D 1785, PVC 1120
NSF STANDARD NO. 14 AND 61
PVC SCH. 80 FITTINGS
ASTM D 1784, ASTM D 2467, ASTM D 2464, ASTM F 1970
NSF STANDARD NO. 14 AND 61
64
Certification
PVC SDR 35 SEWER MAIN PIPE
ASTM D 1784, ASTM D 3034 SDR 35
ASTM D 3212, ASTM F 477
PVC SEWER AND DRAIN PIPE
ASTM D 1784, ASTM D 2729
PVC THIN WALL PIPE & FITTINGS
ASTM D 1784, ASTM D 2949
NSF STANDARD NO. 14
CPVC FLOWGUARD GOLD ® CTS PIPE & FITTINGS
ASTM D 1784, ASTM D 2846
FHA UM-61a
NSF STANDARD NO. 14. AND 61
CSA LISTED ON SPECIFIED ITEMS
CPVC REUZE® CTS PIPE
ASTM D 1784, ASTM D 2846
NSF STANDARD NO. 14.
CPVC CHEMDRAIN ® SCH. 40 PIPE & FITTINGS
ASTM D 1784, ASTM F 2618
NSF STANDARD NO. 14
ABS SCH. 40 DWV CELLULAR CORE PIPE
ASTM D 3965, ASTM F 628
NSF STANDARD NO. 14
ABS PLUS ® SCH. 40 DWV CELLULAR CORE PIPE
ASTM D 3965, ASTM D 4396, ASTM F 1488
NSF STANDARD NO. 14.
ABS SCH. 40 DWV FITTINGS
ASTM D 3965, ASTM D 2661, ASTM D 3311
FHA UM 79a
FEDERAL SPECIFICATION L-P-322b
NSF STANDARD NO. 14
65
C
E
R
T
I
F
I
C
A
T
I
O
N
LIMITED WARRANTY
Charlotte Pipe and Foundry Company® (Charlotte Pipe®) Products are warranted to be free from
manufacturing defects and to conform to currently applicable ASTM standards for a period of
five (5) years from date of delivery. Buyer’s remedy for breach of this warranty is limited to
replacement of, or credit for, the defective product. This warranty excludes any expense for removal
or reinstallation of any defective product and any other incidental, consequential, or punitive
damages. This limited warranty is the only warranty made by seller and is expressly in lieu
of all other warranties, express and implied, including any warranties of merchantability
and fitness for a particular purpose. No statement, conduct or description by Charlotte Pipe
or its representative, in addition to or beyond this Limited Warranty, shall constitute a warranty.
This Limited Warranty may only be modified in writing signed by an officer of Charlotte Pipe.
This Limited Warranty will not apply if:
1) The Products are used for purposes other than their intended purpose as defined by local
plumbing and building codes, and the applicable ASTM standard.
2) The Products are not installed in good and workmanlike manner consistent with normal
industry standards; installed in compliance with the latest instructions published by Charlotte
Pipe and good plumbing practices; and installed in conformance with all applicable plumbing,
fire and building code requirements.
3) This limited warranty does not apply when the products of Charlotte Pipe are used with the
products of other manufacturers that do not meet the applicable ASTM or CISPI standards
or that are not marked in a manner to indicate the entity that manufactured them.
4) In hubless cast iron installations, this warranty will not apply if products are joined with
unshielded hubless couplings. Charlotte Pipe requires that its hubless cast iron pipe and fittings
be joined only with shielded hubless couplings manufactured in accordance with CISPI 310,
ASTM C 1277 and certified by NSF® International or with Heavy Duty Couplings meeting
ASTM C 1540.
5) The Products fail due to defects or deficiencies in design, engineering, or installation of the
piping system of which they are a part.
6) The Products have been the subject of modification; misuse; misapplication; improper
maintenance or repair; damage caused by the fault or negligence of anyone other than
Charlotte Pipe; or any other act or event beyond the control of Charlotte Pipe.
7) The Products fail due to the freezing of water in the Products.
8) The Products fail due to contact with chemical agents, fire stopping materials, thread sealant,
plasticized vinyl products, or other aggressive chemical agents that are not compatible.
9) Pipe outlets, sound attenuation systems or other devices are permanently attached to the
surface of Charlotte® PVC, ABS or CPVC products with solvent cement or adhesive glue.
Charlotte Pipe products are manufactured to the applicable ASTM or CISPI standard. Charlotte
Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or
compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe
and Foundry.
Any Charlotte Pipe products alleged to be defective must be made available to Charlotte Pipe at
the following address for verification, inspection and determination of cause:
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC / Cast Iron pipe or fittings can result in explosive
failures and cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS /
CPVC / Cast Iron pipe or fittings.
• NEVER test PVC / ABS / CPVC / Cast
Iron pipe or fittings with compressed
air or gas, or air over water boosters.
• ONLY use PVC / ABS / CPVC / Cast Iron
pipe or fittings for water or approved
chemicals.
• Refer to warnings on PPFA’s website
and ASTM D 1785.
Charlotte Pipe and Foundry Company
Attention: Technical Services
2109 Randolph Road
Charlotte, North Carolina 28207
Purchaser must obtain a return materials
authorization and instructions for return
shipment to Charlotte Pipe of any product
claimed defective or shipped in error.
Any Charlotte Pipe product proved to be
defective in manufacture will be replaced
F.O.B. point of original delivery, or credit
will be issued, at the discretion of Charlotte
Pipe.
4/24/15
Charlotte and Charlotte Pipe are registered trademarks of Charlotte Pipe and Foundry Company.
66
This catalog accurately reflects dimensional information to the best
of our knowledge. If the dimensions on your job are critical, please
verify dimensional information with our factory.
This dimensional catalog accurately reflects our product line at the
time the catalog was printed. However, we add and delete items on
an ongoing basis to better serve our customers. Please refer to our
current list price sheets for an accurate listing of items offered.
Charlotte Pipe® products are manufactured to the applicable ASTM
standard. Charlotte Pipe and Foundry cannot accept responsibility
for the performance, dimensional accuracy, or compatibility of pipe,
fittings, gaskets, or couplings not manufactured or sold by Charlotte
Pipe and Foundry.
67
PO BOX 35430
CHARLOTTE
NORTH CAROLINA 28235
PHONE
(704) 348-6450
(800) 572-4199
FAX
(800) 553-1605
WWW.CHARLOTTEPIPE.COM