Engineering
Safety &
Productivity
Hazard•Gard® EVLL Series
Explosionproof LED Luminaires
Class I, Division 1 factory-sealed
LED luminaire for general illumination
Hazard•Gard® EVLL Series LED Luminaires
High-performance, high-brightness Hazard•Gard® EVLL LED Luminaire –
brilliantly combining safety, reliability and energy efficiency.
The world’s most demanding environments need smart new
lighting ideas and innovative approaches to enhancing safety.
You need lighting that cuts the overall cost of ownership.
Lighting that improves energy efficiency and lives up to everescalating environmental standards.
You need all of this innovation from a single source. It could
only be: Cooper Crouse-Hinds.
Introducing ESP solutions.
For more than 100 years,
Cooper Crouse-Hinds has exceeded
customer expectations when it comes to
new ideas and technological
advancements.
Today, as the electrical industry’s global leader for hazardous
environments, we continue to reach beyond the expected –
especially with our commitment to
ESP (Engineering Safety & Productivity).
The problem that never happens. That’s the goal behind ESP
– smarter, more powerful solutions engineering safety and
productivity in your world.
Time to look at LEDs in a whole new light.
Dramatic advances in LED technology have broadened the
applicability of this type of illumination, creating an exciting
new option for hazardous, industrial and other highly
demanding locations. Compared to traditional incandescent
and HID technologies, LED light sources can deliver longer
life, enhanced energy efficiency, greater eco-friendliness,
lowered maintenance demands and equal or better quality of
light.
You’re faced with high maintenance and operating costs within
your petrochemical facility. In addition, frequent lamp failures
pose a safety concern where continuous lighting is required.
You’re tasked with identifying a lighting solution that reduces
ownership costs while maintaining similar or improved light
levels.
Old Way:
300 pieces of conventional 400W probe start metal halide
luminaires are installed throughout the facility, requiring
frequent change out of burned-out lamps and ballasts,
resulting in high maintenance costs and ongoing safety
concerns.
New Way:
Install 175W Hazard•Gard® EVLL LED Luminaires to realize up to
56% reduction in energy consumption and slash maintenance
costs associated with lamp replacement. The EVLL LED is
designed to easily adapt to existing mounting modules for quick
replacement and ease of installation.
Benefit:
Innovative applications for this exciting technology are a
natural fit for us, and LED lighting solutions have rapidly
become an integral part of our vision.
2
Realize a potential $215K in energy and maintenance cost
savings per year making the change to Hazard•Gard® EVLL LED
Luminaires. Utilize an environmentally-friendly light
source by implementing Cooper Crouse-Hinds
LED technology.
Hazard•Gard® EVLL Series LED Luminaires
The Hazard•Gard® EVLL Series is a perfect example of
Cooper Crouse-Hinds innovation.
• Improve safety and productivity
• Reduce energy consumption
Engineering
Safety &
Productivity
• Cut overall cost of ownership
• Meet rising environmental standards
Installation and replacement made simple
Modular design - This contractor-friendly design is
ideal for both new construction applications and retrofit.
These luminaires use the same mounting modules as
existing Hazard•Gard® Series luminaires. The quickconnect design facilitates installation - install and wire the
mounting module, then screw in your luminaire. Two start Acme threads
ease and reduce installation time.
High efficiency and lumen output
Driver module assembly - High efficiency LED drivers are designed to
provide reliable operation in even the harshest environments. Various AC
and DC input voltage options are available to suit virtually any drive
requirement.
Safe, reliable heat transfer
Heat sink - Enhanced heat sink design
provides safe and effective heat transfer
from the LED assembly to the outside
environment, ensuring low LED junction
temperature, reliability and sustained
lumen performance.
NEMA 4X Rated
LED Housing Assembly - The LED housing is constructed of
durable die cast aluminum, providing an efficient thermal path to
the heat sink assembly. The impact-resistant lens is sealed from the
outside environment and provides ingress protection against water
and dust. Multi-die LED arrays are used to provide energy-efficient,
long-life white light.
Optional Color Temperatures
Warm and cool white color temperatures
available.
3
Hazard•Gard® EVLL Series LED Luminaires
Hazard•Gard® EVLL LED offers new solutions for old challenges.
The Class I, Division 1 Hazard•Gard® EVLL LED product offering provides the same durability and reliability of a
traditional HID fixture, coupled with the low cost of ownership and energy efficiency of Cooper Crouse-Hinds LED
technology. High-performance LEDs and a solid-state electronic driver provide light where you need it, at a
fraction of the operating costs of HID lighting technologies.
THE EVLL LED FAMILY
LED SYSTEM
Hazard•Gard® EVLL Series LED Luminaires are designed to provide
full-spectrum, crisp, white light. Five versions of the EVLL LED are
available, providing ideal solutions for a wide range of applications.
4
Model
Equivalent HID
EVLL5L
100W-150W MH
EVLL7L
150W-175W HPS/MH
EVLL9L
175W-250W MH
EVLL11L
250W-400W HPS/MH
EVLL13L
400W HPS/MH PS
Typical
Energy Savings
• High brightness light emitting diode (LED) arrays
• Color temperature: 3000K (CRI 82) and 5600K (CRI 65) options
available
• Advanced heat sink design ensures LED does not exceed
manufacturer’s temperature ratings across all specified
ambient conditions
• LM-79 and LM-80 reports available
APPLICATIONS
Up to 62%
• Five lumen outputs for replacement of existing HID luminaires
• Locations requiring continuous and consistent light levels in
extreme ambient temperatures
• Areas requiring frequent on-and-off of lights
• Where flammable vapors, gases, ignitable dusts, fibers or
flyings are present; indoors or outdoors
• Where extremely corrosive, wet, dusty, hot and/or cold
conditions exist
• NEMA 4X, marine, wet locations and hose-down
environments
• Manufacturing plants; heavy industrial, chemical,
petrochemical or pharmaceutical facilities; platforms; loading
docks; tunnels; outdoor wall and stanchion mounted general
area lighting
Hazard•Gard® EVLL Series LED Luminaires
Engineering
Safety &
Productivity
EVLL LED BENEFITS
Industry best for ease of installation
• Quick-connect design – install and wire the mounting
module, then simply screw in the luminaire
• Factory-sealed – no external sealing fittings required in
Groups B, C, and D
• Adapter available for connection to existing Hazard•Gard®
EVI, EVLP, and EVM modules
Reduce operation and maintenance costs
• Energy-efficient – up to 62% reduction in energy used
versus equivalent HID fixtures
• 60,000 hours rated life – eliminates need for frequent lamp
replacement
Reliable performance in any environment
• Shock- and vibration-resistant solid-state luminaires have
no filaments or glass components that could break – greatly
reduces the risk of premature failure
• T5 temperature rating
• Operating ambient -25ºC to 65ºC
CERTIFICATIONS & COMPLIANCES
NEC and CEC
• Class I, Division 1, Groups B, C, D
• Class I, Zone 1, Groups IIB + H2, IIB, IIA
• Class II, Groups E, F, G (Pending)
• Class III, Simultaneous Presence (Pending)
UL Standards
• 844 Electric Fixture Hangers for Hazardous Locations
• 1598 Luminaire
• 1598A Luminaire for Installation on Marine Vessels
CSA Standard
• C22.2 No. 137
Environmental Ratings
• NEMA 4X
• IP66
• Marine and Wet Locations
IEC and ATEX Certifications and Protection (Pending)
• Ex II 2G Ex d IIC (Zone 1, 2) (Pending)
• Ex II 2D Ex tD A21 IP66 (Zone 21, 22) (Pending)
ELECTRICAL RATINGS
STANDARD MATERIALS
• Body and mounting modules – copper-free aluminum with
Corro-free™ epoxy powder coat
• Lens – shatter-resistant, explosionproof glass
• Gaskets – silicone
• Guard – stainless steel
• External hardware – stainless steel
• Factory-sealed*
*Refer to Installation and Maintenance Sheet for external seal requirements.
Model
Voltage
Input
Amps
(Max.)
Power
Factor
Input
Power
Lumen
Output
EVLL5L
100-277VAC 50/60 Hz
108-250VDC
0.46-1.82
0.38-1.89
0.99%
1
80W
5625
EVLL7L
100-277VAC 50/60 Hz
108-250VDC
0.51-1.11
0.42-1.15
0.99%
1
100W
6750
EVLL9L
100-277VAC 50/60 Hz
108-250VDC
0.61-1.19
0.56-1.30
0.99%
1
130W
9000
EVLL11L
100-277VAC 50/60 Hz
108-250VDC
0.76-1.56
0.73-1.71
0.99%
1
151W
10500
EVLL13L
100-277VAC 50/60 Hz
108-250VDC
0.78-1.58
0.75-1.73
0.99%
1
175W
13500
5
Hazard•Gard® EVLL Series LED Luminaires
CATALOG NUMBERING SYSTEM
SERIES
LAMP
OUTPUT
LED
COLOR
MOUNTING
MODULE
HUB SIZE
GUARD
VOLTAGE
EVLL
5L
C
A
2
0
/UNV
SERIES
EVLL
SUFFIXES
Explosionproof Vaportight Low Profile LED Luminaire
LAMP OUTPUT
5L
5,625 Lumen Output
7L
6,750 Lumen Output
9L
9,000 Lumen Output
11L
10,500 Lumen Output
13L
13,500 Lumen Output
LED COLOR
C
Cool (5600K nominal)
W
Warm (3000K nominal)
MOUNTING MODULE
A
Pendant EVSP
BX
Wall Bracket EVSW
CX
Ceiling Mount EVSC
6
J
M
Blank
Stanchion EVSJ
Mounting Module Adapter EVSA (See Note #1)
No Mounting Module Supplied
HUB SIZE
2
3
5
25
32
Blank
⁄4” NPT (Pendant, Ceiling, and Wall Only)
1” NPT (Pendant, Ceiling, and Wall Only)
1 1⁄2” NPT (Stanchion Only)
25 mm (Pendant, Ceiling, and Wall Only)
32 mm (Pendant, Ceiling, and Wall Only)
Leave Blank For Mounting Module Adapter and No Mounting Module
GUARD
0
1
No Guard
Stainless Steel
3
Notes:
VOLTAGE (See Note #2)
/UNV
120VAC to 277VAC 50/60 Hz, 108VDC to 250VDC
1. EVSA Adapter for use with existing Cooper
Crouse-Hinds EVI, EVLP, and EVM mounting
modules.
SUFFIXES
S812
Trunnion Mount
2. Accessory kit EVLL347/480 K1 (step down
transformer in separate enclosure) is
available for 347V and 480V 60 Hz
applications.
Hazard•Gard® EVLL Series LED Luminaires
Engineering
Safety &
Productivity
PHOTOMETRICS
POLAR PLOT CANDELA
(EVLL13LCA20/UNV1)
DISTANCE TO MOUNTING HEIGHT
Isofootcandle chart shows illuminance in
footcandles at ground level
(EVLL13LCA20/UNV1)
3
2
1
0
-1
-2
-3
-3
-2
-1
0
1
2
3
ISOFOOTCANDLE CHART
Footcandle Values for Isofootcandle Lines
A
B
C
D
E
F
ZONE (DEGREES)
LUMENS
% OF LUMINAIRE
Mtg.
Hgt.
A
B
C
D
E
F
0-30
4221
31.7%
12’
34.72
13.89
6.94
3.47
1.39
0.69
0-40
6923
52.1%
16’
19.53
7.81
3.91
1.95
0.78
0.39
0-60
11630
87.5%
20’
12.50
5.00
2.50
1.25
0.50
0.25
0-90
13500
100.0%
25’
8.00
3.20
1.60
0.80
0.32
0.16
90-180
0
0%
0-180
13500
100.0%
LUMEN OUTPUT FOR OTHER EVLL LED LUMINAIRES
Luminaire
Series
EVLL5L
EVLL7L
EVLL9L
EVLL11L
EVLL13L
System
Watts
80W
100W
130W
151W
175W
Lumens
5625
6750
9000
10500
13500
7
Hazard•Gard® EVLL Series LED Luminaires
Engineering
Safety &
Productivity
DIMENSIONS (INCHES)
Pendant
Mount )
Ceiling
Mount )
[104] [91.3]
4.09 3.59
Wall
Mount )
Stanchion
Mount )
[80.2]
3.16
25°
[366.2] [391.6]
14.42 15.42
[334.5]
13.17
[342.4] [367.8]
13.48 14.48
[341.9]
13.46
[407.7]
16.05
[404.8]
Ø 16
[414.4]
Ø 16.32
[414.4]
Ø 16.32
WEIGHTS
[241.5]
9.51
[345.2]
13.59
[353]
13.90
[378.4]
14.90
[454.6]
17.90
[459.5]
18.09
[407.6]
Ø 16.05
FAMILY TREE
Model
EVLL5L
EVLL7L
EVLL9L
EVLL11L
EVLL13L
Add Mounting Modules:
Pendant
Ceiling
Stanchion
Wall
Adapter
Lbs.
51.76
51.81
52.38
53.00
53.00
EV87
EV22
EV33
EVMJ4
EVSJ5
2.0
3.5
3.0
5.5
2.0
EVSW2
EVSW3
EVSW25
EVSW32
EV22
EV33
EVMP2
EVMP3
EVJ2
EVSA
EVSC2 EVSC25
EVSC3 EVSC32
AMBIENT TEMPERATURE
Model
EVLL5L
EVLL7L
EVLL9L
EVLL11L
EVLL13L
Max.
Ambient
Temp.
ºC
Cl. I,
Div. 1
Cl. II, Div.
1&2/
Simu.
Presence
Cl. I,
Zone 1
40
55
65
40
55
65
40
55
65
40
55
40
55
T6
T6
T5
T6
T6
T5
T6
T6
T5
T6
T6
T6
T6
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
For more information, please contact us at www.crouse-hinds.com/contactus
Cooper Industries, Ltd.
600 Travis, Ste. 5800
Houston, TX 77002-1001
P: 713-209-8400
www.cooperindustries.com
5039-0412
Printed in USA
EVSP2
EVSP3
EVSP25
EVSP32