ESD Control Solutions
Made in the
United States of America
Made in the
United Kingdom
ESD Control Products Designed for Europe
Earth Bonding
Point Bars
Pg. 6
Bottles
Pg. 12
Tape
Pg. 10
Containers
Pg. 8
Testers &
Monitors
Pg. 9 & 10
Reztore® Surface
& Mat Cleaner
Pg. 6
Overhead Ionisers
Pg. 10 & 14
Packaging
Bags
Pg. 13
SmartLog V5™
Pg. 9
PCB Storage
Charleswater.co.uk
Signs
Charleswater.co.uk
Testers
Pg. 9
Bench Top
Ionisers
Pg. 10
Binders
Pg. 8
Floor
Marking Tape
Pg. 5
Wrist Straps
Pg. 2
Worksurface Mats
Pg. 4
Floor Mats
Pg. 5
Foot
Grounders
Pg. 3
Lab Coats
Pg. 3
Floor Maintenance
Pg. 5
Waste Bins & Liners
Pg. 8
Probes
Pg. 12
Charleswater Limited is a limited-liability company, registered in England. It is a wholly owned subsidiary of Desco
Industries Inc. (DII), an American manufacturing corporation based in California.
Use Charleswater static control products to optimise your ESD Control programme and to improve quality and throughput.
According to EN 61340-5-2, “Where no ESD handling precautions are taken, a high proportion of electronic apparatus failure
can be attributed to ESD damage. This figure could in theory be reduced to zero by adapting the precautions described in
EN 61340-5-1 in all areas.”
Charleswater sells through a distribution network and holds substantial stocks in the UK. A shipment is received from the USA
every week. Charleswater has a strong commitment to providing the best possible service to all our distribution partners and
the employees work closely with them to ensure availability of product when required.
Charleswater and DII have over 30 years of experience and expertise in the theory and practice of controlling electrostatic
energy in the production electronics context. The organisation is happy to pass this knowledge on to its distributors and customers.
The company maintains an extensive library of technical standards and literature and all the products are supported by
technical bulletins and drawings where appropriate.
Charleswater ESD control products are approved by and supplied to most of the leading electronics manufacturers in Europe
and the rest of the world. Charleswater Limited is an ISO 9001 registered company.
As the European operation of the USA based manufacturer, we see our strength as the products we make. Corporate policy for
Charleswater is to replicate the means used in the USA, using distributors as the most effective way to provide products
to customers.
We market a selection of the very best ESD Control Products manufactured by DII. A number of these are made for the
European market. In addition, we source appropriate products from the UK in order to offer the most complete ESD control
product line possible. Please take the time to visit our web site at Charleswater.co.uk where you will find further information
on our company, including our on-line catalogue which details our entire product range.
Limited Warranty, Warranty Exclusions, Limit of Liability and RMA Request Instructions. See Charleswater’s Warranty http://www.charleswater.co.uk/LimitedWarranty.aspx
1
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
See our products being
Made in the
United States of America
on our web site:
DescoIndustries.com/Factories
Personnel Grounding
Single-Wire Adjustable Elastic
Wrist Straps
•
•
•
•
Meets EN 61340-5-1 tested per ANSI/ESD S1.1
Long-lasting; washable
Fully adjustable and re-adjustable; no loose links
Solid stainless steel wrist band stud
Wrist Bands
Coiled Cords
Item
Colour
Stud
Item
Socket/Socket
Length
60000
Sapphire
4mm
60260
4mm/4mm
1.8m
60001
Sapphire
10mm
60261
10mm/10mm
1.8m
Wrist Bands
Item
Colour
Stud
60158
Blue
10mm
Dual-Wire MagSnap 360™
Metal Wrist Straps
• Meets EN 61340-5-1, tested per ANSI/ESD S1.1
• 360° rotation between wristband and coiled cord; designed to
promote comfort, freedom of motion, and reduce strain on the
operator’s wrist
• Magnetic connection between wristband and coiled cord;
creates a superior electrical connection to eliminate intermittent
failures in traditional snap connections using springs
• Medical grade series stainless steel backplate and links; creates
a more reliable path-to-ground for the operator and is ideal for
use with low voltage style monitors
• Made in the United States of America
Most Popular
Items Listed Here!
Wrist Straps
Item
Size
60694
Small
60695
Medium
60696
Large
To see the full range
of wrist straps visit
Charleswater.co.uk
Reztore® Hand Lotion
• Improves reliability of path-to-ground when using wrist straps, ESD gloves, or ESD footwear
• Special ESD formulation for the electronic manufacturing environment; will not insulate skin
like regular lotions
• Dissipative formulation creates a superior path to ground.
• Non-contaminating and solder-safe; free of chemicals that may adversely affect solderability
or cause corrosion of electronic components
• Contains Vitamins A, D, and E
• Enriched with aloe vera
• Mild peach scent
• Made in the United States of America
Hand Lotion
Item
Size
70950
235ml
70951
1l
See our products being
Made in the
United Kingdom
on our web site:
DescoIndustries.com/Factories
To see the full
range of Reztore®
products visit
Charleswater.co.uk
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
2
Personnel Grounding
Standard Foot Grounder
• Designed to satisfy footwear requirements of
EN 61340-5-1
• Wear resistant rubber provides contact
area to floor
• Non-marking interior will not mark shoes
• Non-fraying hook and loop material
- adjustable and comfortable
Item
Resistor
Unit
70004
1 Megohm
Each
Standard Toe Grounders
• Designed to satisfy Footwear requirements of EN
61340-5-1
• Top-of-the-line, extra wide bands of rubber
• Non-marking dissipative interior
• Made in the United States of America
Item
Unit
70008
Each
Three Layer Non-Marking
Foot Grounder
• Designed to satisfy footwear requirements
of EN 61340-5-1
• Top-of-the-line, extra wide bands
of rubber
• Non-marking dissipative interior
• Made in the United States of America
Item
Resistor
Unit
70007
1 Megohm
Each
Snap-Loc Heel Grounder
• Designed to satisfy footwear requirements of
EN 61340-5-1
• Top-of-the-line, extra wide bands of rubber.
• Hook and loop fastening assembly
• Made in the United States of America
Item
Resistor
Unit
70050
1 Megohm
Each
Disposable Heel Grounders
Disposable Conductive Booties
• Comfortable to wear; yellow for easy identification
• Disposable heel grounders are sanitary and
promote cleanliness for visitors to the ESD
protected area
• Designed for use on all shoes
• Disposable conductive surgical style Booties
are “one size fits all” with elastic opening
• Cleanroom compatible
Item
Unit
70001
Pack of 100
Item
Unit
52016
Box of 150
To see the full range of foot grounders visit Charleswater.co.uk
Statshield® Smocks
ESD Lab Coats
• Designed to satisfy groundable ESD Garment requirements
of EN 61340-5-1 per ANSI/ESD STM2.1
• Hip-to-cuff grounding allows your coil
cord to snap to the hip of the smock
for hands-free grounding, increasing
productivity
• Minimum of 9% carbon conductive
nylon fibers woven In chain-link
design
• Creates Faraday Cage effect
• Panel To Panel Conductivity
• Label with ESD protective
symbol on breast pocket
• Made in the United States of
America
• Designed to satisfy groundable ESD Garment
requirements of EN 61340-5-1 per ANSI/ESD
STM2.1
• 2 side pockets and 1 breast pocket
• Cuffs with snap-fastener
• Tough and durable material
• Composition: polyester (63%), cotton
(33%) and conductive fibres (4%)
• Creates Faraday Cage effect
• Label with ESD protective
3
Item
Description
72100
Jacket, Blue
72160
Jacket, Black
Item
Description
72152
Lab Coat, White
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
See our products being
Made in the
United States of America
on our web site:
DescoIndustries.com/Factories
Working Surface Matting
Statfree T2™ Dissipative Dual Layer Rubber
•
•
•
•
Durable rubber material, dissipative on one side and conductive on the other
Dissipative working surface, 1 x 106 to < 1 x 109 ohms Rp-p
Lightly embossed surface
Meets EN 61340-5-1 working surface, tested per
IEC 61340-2-3
• Made in the United States of America
Item
Colour
Size
80684
Blue
1.5mm x 0.6m x 12.2m
80685
Blue
1.5mm x 0.76m x 12.2m
80686
Blue
1.5mm x 1.2m x 12.2m
80688
Dark Grey
1.5mm x 0.76m x 12.2m
80689
Dark Grey
1.5mm x 1.2m x 12.2m
80663
Green
1.5mm x 1.2m x 12.2m
Statfree O™ Dissipative 3 Layer Vinyl
•
•
•
•
Heat Fused 3-Layer Vinyl Composite
9.5 MM Thickness, Additional Cushioning
Dissipative (1 x 106 to < 1 x 109 ohms Rp-p)
Meets EN 61340-5-1 working surface, tested
per IEC 61340-2-3
• Made in the United States of America
Item
Colour
Size
80530
Blue
9.5mm x 0.6m x 18.3m
Most Popular
Items Listed Here!
Statfree Z2™ Dissipative 3 Layer Vinyl
• Heat fused vinyl composite with top and bottom dissipative vinyl
layers and conductive grid mesh inner layer
• Compatible for use with continuous monitors
• Meets EN 61340-5-1 working surface, tested per IEC 61340-2-3
• Made in the United States of America
Item
Colour Size
80480
Blue
3.2mm x 1.2m x 15.2m
Micastat® Laminate Sheets
•
•
•
•
•
Dissipative High Pressure Thermoset Amino Resin Laminate
Dissipative (< 1 x 109 ohms Rp-p)
Dedicated Conductive Layer
Meets EN 61340-5-1 working surface, tested per IEC 61340-2-3
Made in the United States of America
Item
Colour
Size
90068
Grey
0.97mm x 0.76m x 3.0m
90070
Grey
0.97mm x 0.76m x 3.6m
90080
Grey
0.97mm x 1.2m x 3.6m
90084
Grey
0.97mm x 1.5m x 3.0m
Reztore® Antistatic Surface & Mat Cleaner
• Static dissipative solution: 1 x 106 to < 1 x 109 ohms
• Does not contain silicone
• Made in the United States of America
Item
Description
Litres
71021
Spray Bottle
1
71025
Spray Bottle, Carton Of 12
1
71028
Refill Box
10
See our products being
Made in the
United Kingdom
on our web site:
DescoIndustries.com/Factories
To see the full
range of working
surface matting visit
Charleswater.co.uk
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
4
Floor Paint and Floor Care
Statguard® Dissipative Floor Finish
• Easy to apply; improves productivity
• Produces beautiful, long lasting, durable finish, but easy to strip • Made in the United States of America
Item
71046
71049
Description
Statguard® Floor Finish
Litres
Statguard® Low-VOC Floor Finish
19
Most Popular
Items Listed Here!
10
Statguard® Conductive Acrylic
Latex Paint
•
•
•
•
Meets EN 61340-5-1 flooring tested per IEC 61340-4-1
Easy to repair, touch up, and maintain
Adheres to floor, walls, or wood furniture
Made in the United States of America
Item
Colour
Litres
71016
Dark Grey
3.8
Statguard® Conductive Epoxy
• One coat system saves labour
• Epoxy is a tight cross-linking thermosetting epoxide polymer
providing superior toughness and durability
• Made in the United States of America
Item
Colour
Litres
71010
Light Grey
15
Statguard® Floor Cleaner
• Formulated with dissipative agents that rejuvenate and improve
the properties of floor finish
• Cleans conductive tile flooring
• Made in the United States of America
Item
Litres
71045
10
Statguard® Floor Stripper
• Non-ammoniated and phosphate-free
• Low pH formulation (pH 10.5)
• Strips floor finish from vinyl, VCT, concrete, rubber, terrazzo,
quarry tile, brick, slate, and unglazed ceramic
• Made in the United States of America
Item
Litres
71047
10
Floor Tape and Packaging Tape
• Tough, durable floor tape
• Quick-stick adhesive
• Made in the United States of America
5
Item
Description
Size
91352
Floor Marking Tape, English
50mm x 66m
91350
Aisle Marking Tape
76mm x 33m
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
See our products being
Made in the
United States of America
on our web site:
DescoIndustries.com/Factories
Floor Matting and Grounding
Statfree G2™ Conductive Smooth Rubber
•
•
•
•
Heat, chemical, and abrasion resistant
Easy to cut
Meets EN 61340-5-1 flooring, tested per IEC 61340-4-1
Made in the United States of America
Item
Colour
Size
80109
Black
1.5mm x 1.2m x 2.4m
80113
Black
1.5mm x 1.2m x 12.2m
Statfree S Plus™ Dissipative Anti-Fatigue Rubber
•
•
•
•
•
Cross-link vinyl/nitrile rubber construction
Slip resistant and soil resistant heavy embossed texture
Beveled edges
Meets EN 61340-5-1 flooring, tested per IEC 61340-4-1
Made in the United States of America
Item
Colour
Size
80135
Grey
9.5mm x 0.9m x 18.3m
Earth Bonding Point Bar
• Common ground point to be mounted on under-side of
benchtop or shelf
• Supplied with screws and spare ring terminal
• Black cord 3m long, exits via strain relief on left
Item
Description
52015
10mm Stud, 2 x 4mm Jacks, 1 Meg
To see the full
range of grounding
kits visit
Charleswater.co.uk
Earth Bonding Point Mat Grounding Cord
• Low profile common ground point conical design reduces chances
of accidental detachment
• 10mm snap stud
• Made in the United States of America
Item
Description
60488
10mm stud to 10mm socket, 1 Meg, 4.5m
60474
10mm stud to M5 ring terminal, 1 Meg, 4.5m
Universal Snap Kit
• Snap is user installable
• Kit includes a 10mm stud, 10mm socket,
long screw, short screw, and label
• Made in the United States of America
Item
Description
80014
Universal Snap Kit, 10mm
See our products being
Made in the
United Kingdom
on our web site:
DescoIndustries.com/Factories
Most Popular
Items Listed Here!
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
6
ESD Packaging
Statshield® Transparent Metal-In Bags
•
•
•
•
General use ESD shielding bag
40% light transmission
Meets EN 61340-5-1 and Packaging EN 61340-5-3
Made in the United States of America
Item
Description
Size
Unit
90508
Bag without zipper
150mm x 255mm
Pack of 100
90514
Bag without zipper
200mm x 305mm
Pack of 100
90532
Bag without zipper
455mm x 610mm
Pack of 100
90602
Bag with zipper
100mm x 150mm
Pack of 100
90627
Bag with zipper
355mm x 455mm
Pack of 100
90632
Bag with zipper
455mm x 610mm
Pack of 100
Most Popular
Items Listed Here!
Statshield® Transparent Metal-Out Bags
•
•
•
•
Aluminium metal outer layer of laminated film
Integral antistatic, low tribocharging properties
Meets EN 61340-5-1 and Packaging EN 61340-5-3
Made in the United States of America
Item
Description
Size
Unit
90314
Bag without zipper
200mm x 305mm
Pack of 100
90320
Bag without zipper
255mm x 610mm
Pack of 100
90324
Bag without zipper
305mm x 405mm
Pack of 100
90406
Bag with zipper
125mm x 200mm
Pack of 100
90416
Bag with zipper
255mm x 305mm
Pack of 100
90432
Bag with zipper
455mm x 610mm
Pack of 100
Statshield® EMI/RFI Moisture Barrier Bags
•
•
•
•
Protects contents from ESD, moisture, and EMI/RFI interference
Thickness: Nominal 0.0035" (0.089mm) ±10%
Meets EN 61340-5-1 and Packaging EN 61340-5-3
Made in the United States of America
Item
Size
Unit
90704
200mm x 255mm
Pack of 100
90708
255mm x 610mm
Pack of 100
90714
380mm x 455mm
Pack of 100
To see the full
range of ESD packaging
supplies visit
Charleswater.co.uk
Metal-In Shielding Bubble Bags
• Combines “Faraday Cage” and mechanical protection
• Shields as well as normal shielding bag
of equivalent size
7
Item
Size
Unit
90960
100mm x 150mm, 25mm Flap
Pack of 10
90961
150mm x 255mm, 25mm Flap
Pack of 10
90964
305mm x 405mm, 50mm Flap
Pack of 10
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
See our products being
Made in the
United States of America
on our web site:
DescoIndustries.com/Factories
Tape and Accessories
Desiccant and Humidity
Indicators Cards
ESD Labels
• Clear visible markings
• Strong Adhesive
• RoHS 2, REACH and
Conflict Minerals compliant
• Use Humidity Indicator Cards and
Desiccant in Statshield® ESD Moisture
Barrier Bags to absorb moisture and
protect ESD and moisture sensitive items
• Lead-free RoHS compliant
• Made in the United States of America
Item
Description
Size
Unit
91302
Attention, RS-471
50mm x 50mm
Roll of 500
91335
Susceptibility
5mm x 5mm
Roll of 1,000
91309
Moisture Barrier Bag,
IPC/JEDEC J-STD 020
82mm x 95mm
Roll of 100
Corrugated
Circuit Board Shippers
• Economical, efficient method of storing static sensitive
electronic devices
• Constructed from a unique buried conductive layer of impregnatedcorrugated fiberboard with a static dissipative surface
• Made in the United States of America
Item
Size
37057
229mm x 191mm x 64mm
37061
267mm x 216mm x 64mm
37065
318mm x 267mm x 64mm
37071
394mm x 318mm x 64mm
Item
Description
Size
Unit
90664
Humidity Indicator Card, 5%
10% 15% RH, J-STD-033A
5.1cm x 7.6cm
Can of 125
90665
Humidity Indicator Card, 5%
10% 60% RH, J-STD-033B
5.1cm x 7.6cm
Can of 125
90668
Desiccant Pak, 1 Unit
51mm x 102mm
Box of 450
Waste Bins and Liners
• Conductive waste bins are useful in
large ESD Protected Areas where
waste accumulates and cannot be
conveniently removed except in bulk
• Bin liners are made of antistatic
polyethylene
• Marked with ESD protective symbol
• Made in the United Kingdom
Item
Description
Size
Unit
91101
Conductive Waste Bin
25cm x 25cm x 40cm
Each
91100
Conductive Waste Bin
40cm x 40cm x 78cm
Each
Dissipative Document Holders
91106
Round Conductive
Waste Bin
Diameter 265mm x
320mm high
Each
• Designed for use within ESD Protected Areas
• Keep important douments organised and neat
91103
Blue Bin Liner, 30L
Diameter 32cm
Pack of 100
91102
Blue Bin Liner, 50L
660mm x 750mm
Pack of 100
91104
Blue Bin Liner, 110L
Diameter 46cm
Pack of 100
Wescorp™ ESD Cellulose Tape
Item
Description
Size
Unit
91220
Ring Binder, A4, 2-Ring
25mm
Each
91222
Ring Binder, A4, 4-Ring
50mm
Each
91240
Clipboard, A4
355mm x 230mm
Each
91241
Clipboard with cover, A4
362mm x 480mm
Each
91227
Rigid Wallet Document,
A4, 4-Hole
302mm x 222mm
Pack of 10
91230
Wallet Document,
A4, 11-Hole
233mm x 306mm
91226
Document Holder, A4,
2-Side Open
91228
Document Holder, A4
See our products being
Made in the
United Kingdom
on our web site:
DescoIndustries.com/Factories
• Ideal in packaging for container sealing,
static shielding bag closure, and holding
DIP tubes
• Prevents damage to sensitive electronic
components in manufacturing
• Ideal for sealing ESD bags and other ESD
packaging/containers
• Lead-free RoHS compliant
Item
Description
Size
72400
Tape without ESD Symbols
12mm x 32.9m, 25.4mm Core
72405
Tape without ESD Symbols
24mm x 65.8m, 76.2mm Core
72410
Tape with ESD Symbols
18mm x 5.8m, 76.2mm Core
72412
Tape with ESD Symbols
48mm x 5.8m, 76.2mm Core
Pack of 100
72415
Tape with ESD Symbols and
Yellow Stripes
24mm x 65.8m, 76.2m Core
306mm x 219mm
Pack of 100
72416
Tape with ESD Symbols and
Yellow Stripes
48mm x 65.8m, 76.2mm Core
82mm x 117mm
Each
71137
ESD Tape Dispenser
50mm Wide x 76mm Core
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
8
Personnel Testing and Monitoring
SmartLog V5TM With Turnstile
•
•
•
•
•
•
•
Data acquisition system for personnel grounding test results
Ensures accuracy of personnel grounding test data
Tests per EN 61340-5-1 A.1 and A.2
Works with TEAM5 software to generate reports for supervisors and managers
Live reporting of operator ESD status means allows for self-management
Built-in relay compatible with most access control devices
Made in the United States of America and the United Kingdom
Item
Description
50493
TEAM5 Software
50768
SmartLog V5TM
50769
SmartLog V5TM with 10mm Adapter
50777
Turnstile with SmartLog V5TM, 220VAC
Combo Tester
Most Popular
Items Listed Here!
• Determines that the operator’s personnel grounding
device is functioning correctly
• Tests per EN 61340-5-1 A.1 and A.2
• Made in the United States of America
Item
Description
99037
Combo Tester
99038
Combo Tester with Stand and Foot Plate
Combo Tester X3
•
•
•
•
•
Simultaneous testing in less than 3 seconds
Tests per EN 61340-5-1 A.1 and A.2
Solid-state test switch with no moving parts
Built-in relay compatible with most access control devices
Made in the United States of America
Item
Description
99031
Combo Tester X3
99032
Combo Tester X3 With Stand
99033
Combo Tester X3 with 10mm Adapter
99034
Combo Tester X3 With 10mm Adapter and Stand
See the full
range of testers and
monitors visit
Charleswater.co.uk
Multi-Mount Continuous Monitor
• Continuously monitors the integrity of one operator
and ESD working surface, eliminating the need for wrist strap
periodic testing and recording
• Made in the United States of America
Item
Description
99129
Continuous Monitor, 220VAC
Dual Operator Continuous Monitor
with Satellites
• Continuously monitors the integrity of two operators and working surface,
eliminating the need for wrist strap periodic testing and recording
• Made in the United States of America
9
Item
Description
99093
Continuous Monitor, 4mm, 220VAC
99095
Continuous Monitor, 10mm, 220VAC
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
See our products being
Made in the
United States of America
on our web site:
DescoIndustries.com/Factories
Monitors and Ionisers
Overhead Zero
Volt Ioniser
SIM Software License
•
•
•
EMIT SIM Software monitors and records
the activity of EMIT Smart Products
Polls both ionisers and monitors from
one software installation
Records and displays failures to
notify supervisors or engineers when
a device needs attention
•
•
•
•
Item
Description
50152
Up To 50 Devices & 1 Year Service
Chargebuster Overhead
Ioniser
• ±10V offset voltage balance
• Meets EN 61340-5-1 per ANSI/ESD STM3.1
• Made in the United States of America
Fast decay times
(<3 seconds at 46cm)
±3V offset voltage balance Meets EN 61340-5-1 per ANSI/ESD STM3.1
Made in the United States of America
Item
Description
50671
Overhead Ioniser, 2-Fan, 220VAC
50672
Overhead Ioniser, 3-Fan, 220VAC
Compatible
Chargebuster Overhead
Ioniser With Lights
•
•
•
•
700 lumen LED panel lights (cool white)
±10V offset voltage balance Meets EN 61340-5-1 per ANSI/ESD STM3.1
Made in the United States of America
Item
Description
50681
Overhead Ioniser, 3-Fan, 220VAC
Item
Description
50682
Overhead Ioniser, 2-Fan, 220VAC
50602
Overhead Ioniser with Lights, 2-Fan, 220VAC
50603
Overhead Ioniser with Lights, 3-Fan, 220VAC
Bench Top Zero
Volt Ioniser
•
•
•
•
Mini Zero Volt
Ioniser 2
Fast decay times (<2 seconds at 30cm)
±3V offset voltage balance
Meets EN 61340-5-1 per ANSI/ESD STM3.1
Made in the United States of America
Item
Description
50670
Bench Top Ioniser, 220VAC
•
•
•
•
Compatible
Fast decay times (<3 seconds at 30cm)
Compact size (14 cm x 9 cm x 4 cm)
Meets EN 61340-5-1 per ANSI/ESD STM3.1
Made in the United States of America
Item
Description
50642
Mini Zero Volt Ioniser 2
Chargebuster Ion Gun
• Point-of-use compressed air ioniser
• Fast decay times (<1 second at 15cm)
• ±30V offset voltage balance
• Meets EN 61340-5-1 per ANSI/ESD STM3.1
Item
Description
50644
Ion Gun, 220VAC
Ion Python
•
•
•
•
Zero Volt Monitor
•
•
•
•
•
•
Most advanced means of monitoring the
ground path for operators, working surface,
and equipment
Adjustable audible alarm level
For use with dual-wire wrist straps
Durable stainless steel enclosure
Meets EN 61340-5-1
Made in the United States of America
•
•
•
Adjustable 30 to 100 PSI air pressure
±25V offset voltage balance
Meets EN61340-5-1 per ANSI/ESD STM3.1
Made in the United States of America
Item
Description
50621
Ion Python, with Foot Switch, 220VAC
50623
Ion Python, with Hand Gun, 220VAC
Zero Volt Monitor Solo
Continuously monitors the ground integrity and charge generation of one operator and supervisor as well as the ground integrity for one ESD worksurface and one optional tool
Meets EN 61340-5-1
Made in the United States of America
Item
Description
Item
Description
50537
Monitor With 2 Wrist Straps
50579
Continuous Monitor With 1 Wrist Strap
See our products being
Made in the
United Kingdom
on our web site:
DescoIndustries.com/Factories
Compatible
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
10
ESD Test Equipment
Digital Surface Resistance Meter Kit
•
•
Designed to measure resistance point-to-point (Rp-p) and surface-to-ground (Rg) in accordance with EN 61340-5-1
Electrostatics and its test method IEC 61340-2-3
Determines if a surface is dissipative, conductive, or insulative
for ESD control applications in electronics manufacturing or
handling environments
• Measures temperature and relative humidity
• Made in the United States of America
Item
Description
99026
Digital Surface Resistance Meter Kit
Most Popular
Items Listed Here!
Analogue Surface Resistance Meter Kit
• Ohm values are expressed with analogue display and LEDs
• Automatic test range voltage selection per Compliance Verification ESD TR53
• Dedicated LED illuminates when battery power is low to prevent operator from
making bad measurements
• Made in the United States of America
Item
Description
99111
Analogue Surface Resistance Meter Kit
Digital Static Field Meter
• Portable electrostatic meter for testing of static fields • Problem solving tool that may be used to identify items that are
able to be charged
• Optical distance indicator ensures accuracy and repeatability
• Made in the United States of America
Item
Description
50597
Digital Static Field Meter
Ionisation Test Kit
• Portable kit for testing of electrostatic fields, and offset
voltage and decay times of air ionisers
• Use for EN 61340-5-1 required compliance verification of
ionisers per ANSI/ESD STM3.1
• Charger applies ±1,000V to conductive plate to determine
decay times
• Made in the United States of America
Item
Description
50598
Ionisation Test Kit
ESD Survey Kit
To see the full
range of ESD test
kits visit
Charleswater.co.uk
• ESD Survey Kit Includes:
- Digital Surface Resistance Meter Kit
- AC Outlet Analyser and Wrist Strap Tester
- Low Resistance Tester
- Digital Static Field Meter and Ionisation Test Kit
- Training Paddles Set
- Jewel® Wrist Strap
- Wescorp™ Heel Grounder, Medium
- Pelican Case 1510 with wheels, retractable handle, and
custom foam insert
Item
Description
99201
ESD Survey Kit, UK
99202
ESD Survey Kit, Europe
11
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
See our products being
Made in the
United States of America
on our web site:
DescoIndustries.com/Factories
Bottles and Tools
durAstatic™ Dissipative
ESD Protective Bottles
•
•
•
•
Designed to protect your valuable static sensitive printed circuitry
No migratory additives - reduces the chance for contamination
from the bottle
Embossed with ESD Protective Symbol
Made in the United States of America
Item
Size
Colour
Pump
35283
180ml
Blue
One-Touch
35276
180ml
Yellow
One-Touch
35270
180ml
Orange
One-Touch
35273
180ml
Green
One-Touch
Natural HDPE Bottles
•
•
•
•
•
High Density Polyethylene
Square shape provides stability and saves storage space
Available with no-spill locking pump
Easy to fill wide opening
Made in the United States of America
Item
Size
Colour
Pump
35702
120ml
Natural
Take-Along
Nylon Probe Tools
• Ideal material for use in ESD protected area
• Nylon finish will not mar delicate surfaces
• Temperature resistant
• Made in the United States of America
Item
Description
Size
35621
Spudger Probe
140mm
35622
Point Blade Probe
150mm
35619
Fork-Blade Probe
178mm
Stainless Steel Probe Tools
• Ergonomic hex handle for better grip
• Non-magnetic, conductive, 300 series stainless steel
• Made in the United States of America
Item
Description
Size
35617
Angle Probe
140mm
35630
Probe Kit Of Four With Pouch
140mm
Brushes
• Allows thorough cleaning of ESD sensitive assemblies
without the danger of high charges generated by
conventional brushes
• Hot stamped ESD protective symbol
Item
Description
Size
35689
Dissipative Brush, Curved Handle
76mm x 38mm
35695
Conductive Brush, Curved Handle
20mm x 38mm
35694
Flat Conductive Brush
12.7mm
35686
Flat Dissipative Brush
25.4mm
See our products being
Made in the
United Kingdom
on our web site:
DescoIndustries.com/Factories
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
12
Packaging Bags & Accessories
Charleswater sells the full range of SCS products. SCS is the world’s largest vertically
integrated manufacturer of static control film, static shielding bags, moisture barrier bags,
humidity indicator cards, and ESD instrumentation. These catalogue pages are a sampling
of what we have available. Visit Charleswater.co.uk to see the SCS product range we have
to offer. If you don’t see what you are looking for, contact us.
Shielding and Moisture Barrier Bags
1000 Series
Product
Detail
1500 Series
2000 Series
3000 Series
• Metal-In Bag
• PCB assemblies, sensitive
devices, computer
manufacturers and general
ESD markets
• Metal-Out Bag
• Low exterior static surface
resistivity
• Low charge retention
1 x 104 to < 1 x 1011 ohms
1 x 104 to < 1 x 108 ohms
1 x 104 to < 1 x 1011 ohms
1 x 104 to < 1 x 1011 ohms
Thickness
0.0028" (0.071mm)
0.0030" (0.0762mm)
0.0036" (0.0914mm)
0.006” (0.1524mm)
Puncture
Resistance
12 lbs
10 lbs
20 lbs
16 lbs
N/A
N/A
≤0.035
(gms / 100 in2 / 24 hrs, 100°F)
≤0.0003
(gms / 100 in2 / 24 hrs, 100°F)
Surface
Resistance:
Exterior
MVTR
Items
• 10035, 100812, 1001012,
30046, 300610, 30058
• Dri-Shield™ Aluminized
Moisture Barrier Bag
• Cost effective
• Designed for moisture
sensitive items
• 150713, 150720, 150815
To see the full range of
• Dri-Shield™ Foil Moisture
Barrier Bag
• Thick, durable bag
• Nylon Reinforcement Layer
• 7001618, 7001824,
7001024
• D301618, D301012,
D301020
bags visit Charleswater.co.uk
Desiccant
Humidity Indicator Cards
• SCS Desiccant pouches
absorb moisture that
passes through the bag
laminate
• Desiccant is packed inside
white non-woven Tyvek®
pouches, and is shipped in
sealed pails
• Use with Moisture
Barrier Bags and Humidity
Indicator Cards
• Measures the level of relative
humidity that the contents of
the packaging have been
exposed to
• SCS Humidity Indicator Cards
(HIC) are printed with moisture
sensitive spots which change
color from blue to pink when
exposed to a relative humidity
level
Item
Size
Unit
Item
Description
Unit
1/2PLDES550
1/2 Unit
Pail of 550
6HIC200
6 Spot
Can of 200
1PLDES300
1 Unit
Pail of 300
51060HIC125
5-10-60%
Can of 125
13
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
See our products being
Made in the
United States of America
on our web site:
DescoIndustries.com/Factories
Electronics
Benchtop Air Ionizer
Monitors
• Steady-state DC benchtop ioniser with
auto-balance
• Less than 2 seconds discharge time
with ±15 volts offset voltage (balance)
• Electrostatically shielded emitter points
• Ionisation performance is consistent at all
speeds and allows for use with sensitive
applications, such as calibration, test or
repair procedures
• No power cord included
•
•
Item
Description
963E-NO
Benchtop Air ionizer, No Power Cord
EM Eye - ESD Event Meter
• Detects, counts and measures ESD events that can
damage ESD items and cause tool lock-ups, erratic
behavior and parametric errors
• Calculates event magnitude for Charged Device
Model (CDM), Human Body Model (HBM) and
Machine Model (MM)
• Records all measurements to a microSD card for
PC download
• Touchscreen display provides intuitive user interface
• Rechargeable lithium ion battery
• Assembled in the United States of America with
Globally Sourced Materials
Continuously monitors the
path-to-ground integrity of an
operator and conductive or
dissipative working surface
Visible and audible alarms
indicate improper grounding of the operator and working surface
Item
Description
724MO
724 Workstation Monitor, No Adapter
CTC331-WW
Iron Man™ Plus Monitor
Ground Pro Meter
• Verifies Critical Grounding Parameters of a Facility
• Provides Accurate Measurements of Ground
Impedance on a Working Tool
• Meets ANSI/ESD S20.20 requirements for AC
impedance
• Auto-Zero Function for Test Leads
• Calibrated with accepted procedures and
standards traceable to the National Institute of
Standards and Technology.
Item
Description
Item
Description
CTM048-21
EM Eye Meter With ESD Sensor
CTM051
Ground Pro Ground Integrity Meter
Static Management Program (SMP)
The Next Generation of ESD Process Control
• Continuously monitors static control systems at all stages of the manufacturing process
• Ensures the investments that make up your ESD program (ESD Mats, Wrist Straps, Grounding Equipment, Continuous Monitors, etc.) are working properly
• Allows manufacturers to identify problem areas to help prevent product rework while
improving their overall ESD program
• The Static Management Program (SMP) is designed to give you real-time performance
data that can help you gain process savings, quality improvements and higher yields
•
Contact us for a Virtual Demo
See our products being
Made in the
United Kingdom
on our web site:
DescoIndustries.com/Factories
Item
Description
CTC061-5-243-WW
WS Aware Monitor
CTC034-030-5-WW
EM Aware Monitor
CTC065-5-WW
Ground Master Monitor
SMP Software
Web: Charleswater.co.uk • Tel: +44 (0)1892 665 313 • E-mail: Service@Charleswater.co.uk
Address: Unit 17, Millbrook Business Park, Sybron Way, Crowborough, East Sussex, TN6 3JZ, United Kingdom
14
ESD Control Products
Designed For Europe
Statguard®
Statfree®
Unit 17, Millbrook Business Park, Sybron Way
Crowborough, East Sussex, TN6 3JZ, U.K.
2/16
DESCO INDUSTRIES INC.
Employee Owned
© Copyright 2016 Desco Industries Inc.
Statshield®