50 Hz
SH Series
CENTRIFUGAL ELECTRIC PUMPS MADE OF AISI 316 STAINLESS STEEL
IN COMPLIANCE WITH EN 733, EQUIPPED WITH IE2/IE3 MOTORS
COMPLYING WITH REGULATION (EC) no. 640/2009
Cod. 191002941 R
ev
.B Ed.06/2012
Rev
ev.B
SH SERIES
HYDRA
ULIC PERFORMANCE RANGE A
T 50 Hz
HYDRAULIC
AT
2
CONTENTS
5
6
8
9
14
15
24
26
28
51
75
93
99
Specifications ......................................................................................................................................
Construction Characteristics ................................................................................................................
List of Models ......................................................................................................................................
List of Models and Tables of Materials .................................................................................................
SH Mechanical Seal .......................................................................................................................
Motors ..........................................................................................................................................
Hydraulic Performance Range, SH series, 50 Hz 2 Poles .................................................................
Hydraulic Performance Range, SH series, 50 Hz 4 Poles .................................................................
Operating Characteristics, SH series, 50 Hz 2 Poles .......................................................................
Operating Characteristics, SH series, 50 Hz 4 Poles .......................................................................
Dimensions and Weights ...............................................................................................................
Accessories ...................................................................................................................................
Technical Appendix .......................................................................................................................
3
4
Centrifugal
electric pumps
made of
AISI 316
stainless steel
in compliance
with EN 733
MARKET SECTORS
The Lowara SH series pumps are used for water and clean
liquid circulation in heating, ventilating and air
conditioning systems, and for pressure boosting in
industrial applications.
SH Series
• Temperature of pumped
liquid
liquid:
Standard -10°C to +120°C.
Special versions available on request.
• Maximum working pressure
pressure:
12 bar (PN 12).
MOTOR
SPECIFICA
TIONS
SPECIFICATIONS
PUMP
• The SH series consists of singlestage
centrifugal pumps made of
pressed AISI 316 stainless steel.
• The liquid sizes and diameters of the
suction and delivery ports are in
compliance with EN 733 standards
(ex DIN 24255).
• Flange dimensions in compliance
with EN 1092-1.
• Available sizes: DN 25 to DN 80.
• Anti-clockwise rotation when facing
pump’s suction port.
• Back pull-out design.
APPLICA
TION RANGE
APPLICATION
• Delivery
Delivery:
up to 240 m3/h, 2 poles.
up to 130 m3/h, 4 poles.
• Head
Head:
up to 110 m, 2 poles.
up to 23 m, 4 poles.
5
• Three-phase asynchronous, squirrel
cage rotor, enclosed construction,
external ventilation.
• Performances according to
EN 60034-1.
• Standard supplied IE2/IE3
motors are compliant with
Regulation (EC) no. 640/2009
and IEC 60034-30
60034-30.
• IP55 protection.
• Insulation class 155 (F).
• Max. ambient temperature: 40°C.
For different environmental
conditions, check the power.
• Overload protection to be provided
by user.
• Condensation drain plugs on all
LOWARA motors.
• Standard voltage
voltage:
Single-phase version 220-240 V, 50 Hz
Three-phase version 220-240/380-415
V, 50 Hz for powers up to 3 kW;
380-415/660-690 V, 50 Hz for
powers above 3 kW.
CONSTRUCTION
CHARACTERISTIC
S
CHARACTERISTICS
• Stainless steel centrifugal pump with end suction
and radial discharge ports.
• Pump body made of AISI 316L stainless steel.
• Flanges in compliance with EN 1092-1 (ex UNI
2236 and DIN 2533).
• Back pull-out design (impeller, bracket and motor
can be extracted without disconnecting the pump
body from the piping).
• Closed impeller made of AISI 316L stainless steel,
laser-technology welded (for sizes 25, 32, 40, 50,
65-160/75, 65-160/110A) or AISI CF8M cast
stainless steel.
• Mechanical seal according to EN 12756 (ex DIN
24960).
• AISI 316L stainless steel fill & drain plugs.
MOTOR-PUMP COUPLING
• SHE
SHE: close-coupled by means of a bracket with
impeller keyed directly to the motor shaft extension.
• SHS
SHS: with a bracket, adaptor and rigid coupling
keyed to the standard motor shaft extension.
• SHF
SHF: with bracket, support, flexible coupling, and
aligning and anchoring base.
..SC : with bracket, support, spacer coupling,
• SHF
SHF..SC
aligning and anchoring base.
• Bare shaft pump version.
ACCES
SORIES ON REQUEST
ACCESSORIES
• AISI 316 stainless steel or galvanized iron
counterflanges.
• Intermediate flange with pressure gauge connection.
• Pump and motor shims.
OPTIONAL FEA
TURES
FEATURES
• Different voltages and frequencies.
• Special materials for the mechanical seal and
gaskets.
• Version with internal recirculation of pumped liquid
to mechanical seal.
• Version with rotation locking system seal.
• Tropicalized motors.
• Version with Hydrovar® control system.
• SHF with flexible coupling with spacer.
• Diesel motor.
6
SH SERIES
IDENTIFICA
TION CODE
IDENTIFICATION
SH
E
4
32
-
200
/
40
6
A
/_
SC
Version with spacer coupling
Null or
Letter assigned by the manufacturer
Reduced impeller
Null = 50 Hz
6 = 60 Hz
Rated motor power (kW x 10)
Impeller nominal diameter (mm)
Discharge port nominal diameter (mm)
‰ = 2-pole motor
4 = 4-pole motor
E = Close-coupled version
S = Version with rigid coupling, IEC standard motor
F = Version with flexible coupling, base according to EN 733
SH Series name
SHE - SHS RA
TING PLA
TE
RATING
PLATE
LEGEND
1 - Electric pump type
2 - Code
3 - Delivery range
4 - Head range
5 - Motor type
6 - Date of manufacturing and serial number
7 - Impeller diameter
8 - Minimum head
9 - Mechanical seal material identification code
10 - Speed
11 - Rated power
12 - Maximum operating temperature
13 - Maximum operating pressure
14 - O-ring material identification code
SHF RA
TING PLA
TE
RATING
PLATE
(PUMP ONL
Y)
ONLY)
SHF RA
TING PLA
TE
RATING
PLATE
(ELECTRIC PUMP)
7
ELENCO MODELLI SERIE SH 50 Hz
z 50 Hz
LIST OF MODELS SH SERIES
4 POLI
2 POLES
4 POLES
SIZE
25-125/07
25-125/11
25-160/15
25-160/22
25-200/30
25-200/40
25-250/55
25-250/75
25-250/110
32-125/07
32-125/11
32-160/15
32-160/22
32-200/30
32-200/40
32-250/55
32-250/75
32-250/110
40-125/11
40-125/15
40-125/22
40-160/30
40-160/40
40-200/55
40-200/75
40-250/92
40-250/110A
40-250/110
40-250/150
50-125/22
50-125/30
50-125/40
50-160/55
50-160/75
50-200/92
50-200/110A
50-200/110
50-250/150
50-250/185
50-250/220
65-160/40
65-160/55
65-160/75
65-160/92
65-160/110A
65-160/110
65-200/150
65-200/185
65-200/220
65-250/300
65-250/370
80-160/110
80-160/150
80-160/185
80-200/220
80-200/300
80-200/370
80-250/450
80-250/550
80-250/750
• = Available
VERSION
kW
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
1,1
1,5
2,2
3
4
5,5
7,5
9,2
11
11
15
2,2
3
4
5,5
7,5
9,2
11
11
15
18,5
22
4
5,5
7,5
9,2
11
11
15
18,5
22
30
37
11
15
18,5
22
30
37
45
55
75
SIZE
SHEM
SHE
SHS
SHF
•
•
•
•
•
•
•
•
•
•
•
•
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25-125/02A
25-125/02
25-160/02
25-160/03
25-200/03
25-200/05
25-250/07
25-250/11
25-250/15
32-125/02A
32-125/02
32-160/02
32-160/03
32-200/03
32-200/05
32-250/07
32-250/11
32-250/15
40-125/02A
40-125/02
40-125/03
40-160/03
40-160/05
40-200/07
40-200/11
40-250/11
40-250/15
40-250/22
50-125/03A
50-125/03
50-125/05
50-160/07
50-160/11
50-200/11
50-200/15
50-250/22A
50-250/22
50-250/30
65-160/05
65-160/07
65-160/11A
65-160/11
65-160/15
65-200/15
65-200/22
65-200/30
65-250/40
65-250/55
80-160/15
80-160/22A
80-160/22
80-200/30
80-200/40
80-250/55
80-250/75
80-250/110
• = Available
sh_she-shs-shf_2p50-en_b_tem
8
VERSION
kW
0,25
0,25
0,25
0,37
0,37
0,55
0,75
1,1
1,5
0,25
0,25
0,25
0,37
0,37
0,55
0,75
1,1
1,5
0,25
0,25
0,37
0,37
0,5
0,75
1,1
1,1
1,5
2,2
0,37
0,37
0,5
0,75
1,1
1,1
1,5
2,2
2,2
3
0,5
0,75
1,1
1,1
1,5
1,5
2,2
3
4
5,5
1,5
2,2
2,2
3
4
5,5
7,5
11
SHE4
SHS4
SHF4
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
sh_she4-shs4-shf4_4p50-en_c_tem
SHE - SHE4 SERIES
LIST OF MODELS AND T
ABLE OF MA
TERIALS
TABLE
MATERIALS
DENOMINAZIONE MODELLI
SERIE SHE - SHE4 CON
STAFFA DI SOSTEGNO
VERSIONS
MATERIALI SHE
REF.
NAME
2
3
4
5
6
7
8
9
10
11
12
13
15
4 POLES
SHE 25-125/07
SHE 25-125/11
SHE 25-160/15
SHE 25-160/22
SHE 25-200/30
SHE 25-200/40
SHE 25-250/55
SHE 25-250/75
SHE 25-250/110
SHE 32-125/07
SHE 32-125/11
SHE 32-160/15
SHE 32-160/22
SHE 32-200/30
SHE 32-200/40
SHE 32-250/55
SHE 32-250/75
SHE 32-250/110
SHE 40-125/11
SHE 40-125/15
SHE 40-125/22
SHE 40-160/30
SHE 40-160/40
SHE 40-200/55
SHE 40-200/75
SHE 40-250/92
SHE 40-250/110
SHE 50-125/22
SHE 50-125/30
SHE 50-125/40
SHE 50-160/55
SHE 50-160/75
SHE 50-200/92
SHE 50-200/110
SHE 65-160/40
SHE 65-160/55
SHE 65-160/75
SHE 65-160/92
SHE 65-160/110
SHE 80-160/110
SHE4 25-200/05
SHE4 25-250/07
SHE4 25-250/11
SHE4 25-250/15
SHE4 32-200/05
SHE4 32-250/07
SHE4 32-250/11
SHE4 32-250/15
SHE4 40-160/05
SHE4 40-200/07
SHE4 40-200/11
SHE4 40-250/11
SHE4 40-250/15
SHE4 40-250/22
SHE4 50-125/05
SHE4 50-160/07
SHE4 50-160/11
SHE4 50-200/11
SHE4 50-200/15
SHE4 50-250/22A
SHE4 50-250/22
SHE4 50-250/30
SHE4 65-160/05
SHE4 65-160/07
SHE4 65-160/11A
SHE4 65-160/11
SHE4 65-160/15
SHE4 65-200/15
SHE4 65-200/22
SHE4 65-200/30
SHE4 65-250/40
SHE4 65-250/55
SHE4 80-160/15
SHE4 80-160/22A
SHE4 80-160/22
SHE4 80-200/30
SHE4 80-200/40
SHE4 80-250/55
SHE4 80-250/75
sh-she-p-en_b_mo
REFERENCE STANDARDS
MATERIAL
N.
1
2 POLES
EUROPE
USA
Pump body
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 25-32-40-50-65(160)
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 65(200-250)-80
Stainless steel
EN 10213-4-GX5CrNiMo19-11-2 (1.4408) ASTM CF8M (cast AISI 316)
Seal housing
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
Wear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Counterwear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
AISI 316L
Shaft extension
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Rigid shaft coupling
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Impeller locknut and washer
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Tab
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Fill/drain plugs
Mechanical seal
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
Ceramic / Carbon / FPM (standard version)
Elastomers
FPM (standard version)
Adapter *
Aluminium
EN 1706-AC-AlSi11Cu2 (Fe) (AC46100)
-
Adapter *
Cast iron
Galvanized steel
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Pump body fastening bolts & screws
* For the 25/32/40-125 2/4 pole, 25/32/40-160 2/4 pole, 25/32/40-200 2/4 pole versions
AISI 316
sh_she-en_c_tm
9
SHE - SHE4 SERIES
LIST OF MODELS AND T
ABLE OF MA
TERIALS
TABLE
MATERIALS
DENOMINAZIONE MODELLI
SERIE SHE CON PIEDE DI
SOSTEGNO SUL MOTORE
VERSIONS
2 POLES
4 POLES
SHE 40-250/150
SHE 50-250/150
SHE 50-250/185
SHE 50-250/220
SHE 65-200/150
SHE 65-200/185
SHE 65-200/220
SHE 80-160/150
SHE 80-160/185
SHE 80-200/220
SHE4 80-250/110
sh-she-s-en_b_mo
DENOMINAZIONE MODELLI
SERIE SHE4 CON MOTORE
MEC 71 B5
VERSIONS
4 POLES
SHE4 25-125/02A
SHE4 25-125/02
SHE4 25-160/02
SHE4 25-160/03
SHE4 25-200/03
SHE4 32-125/02A
SHE4 32-125/02
SHE4 32-160/02
SHE4 32-160/03
SHE4 32-200/03
SHE4 40-125/02A
SHE4 40-125/02
SHE4 40-125/03
SHE4 40-160/03
SHE4 50-125/03A
SHE4 50-125/03
sh-she4-p-en_a_mo
MATERIALI SHE
REF.
NAME
REFERENCE STANDARDS
MATERIAL
N.
1
2
3
4
5
6
7
8
9
10
11
12
13
15
EUROPE
USA
Pump body
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 25-32-40-50-65(160)
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 65(200-250)-80
Stainless steel
EN 10213-4-GX5CrNiMo19-11-2 (1.4408) ASTM CF8M (cast AISI 316)
Seal housing
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
Wear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Counterwear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
AISI 316L
Shaft extension
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Rigid shaft coupling
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Impeller locknut and washer
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Tab
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Fill/drain plugs
Mechanical seal
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
Ceramic / Carbon / FPM (standard version)
Elastomers
FPM (standard version)
Adapter *
Aluminium
EN 1706-AC-AlSi11Cu2 (Fe) (AC46100)
-
Adapter *
Cast iron
Galvanized steel
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Pump body fastening bolts & screws
* For the 25/32/40-125 2/4 pole, 25/32/40-160 2/4 pole, 25/32/40-200 2/4 pole versions
AISI 316
sh_she-en_c_tm
10
SHS - SHS4 SERIES
LIST OF MODELS AND T
ABLE OF MA
TERIALS
TABLE
MATERIALS
DENOMINAZIONE MODELLI
SERIE SHS - SHS4 CON
STAFFA DI SOSTEGNO
VERSIONS
2 POLES
4 POLES
SHS 25-125/07
SHS 25-125/11
SHS 25-160/15
SHS 25-160/22
SHS 25-200/30
SHS 25-200/40
SHS 25-250/55
SHS 25-250/75
SHS 32-125/07
SHS 32-125/11
SHS 32-160/15
SHS 32-160/22
SHS 32-200/30
SHS 32-200/40
SHS 32-250/55
SHS 32-250/75
SHS 40-125/11
SHS 40-125/15
SHS 40-125/22
SHS 40-160/30
SHS 40-160/40
SHS 40-200/55
SHS 40-200/75
SHS 50-125/22
SHS 50-125/30
SHS 50-125/40
SHS 50-160/55
SHS 50-160/75
SHS 65-160/40
SHS 65-160/55
SHS 65-160/75
SHS4 25-250/07
SHS4 25-250/11
SHS4 25-250/15
SHS4 32-250/07
SHS4 32-250/11
SHS4 32-250/15
SHS4 40-200/07
SHS4 40-200/11
SHS4 40-250/11
SHS4 40-250/15
SHS4 40-250/22
SHS4 50-160/07
SHS4 50-160/11
SHS4 50-200/11
SHS4 50-200/15
SHS4 50-250/22A
SHS4 50-250/22
SHS4 50-250/30
SHS4 65-160/05
SHS4 65-160/07
SHS4 65-160/11A
SHS4 65-160/11
SHS4 65-160/15
SHS4 65-200/15
SHS4 65-200/22
SHS4 65-200/30
SHS4 65-250/40
SHS4 65-250/55
SHS4 80-160/15
SHS4 80-160/22A
SHS4 80-160/22
SHS4 80-200/30
SHS4 80-200/40
SHS4 80-250/55
SHS4 80-250/75
MATERIALI SHS
REF.
NAME
sh-shs-p-en_b_mo
REFERENCE STANDARDS
MATERIAL
N.
1
2
3
4
5
7
8
9
10
11
12
13
14
15
EUROPE
USA
Pump body
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 25-32-40-50-65(160)
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 65(200-250)-80
Stainless steel
EN 10213-4-GX5CrNiMo19-11-2 (1.4408) ASTM CF8M (cast AISI 316)
Seal housing
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
Wear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Counterwear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Rigid shaft coupling
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Impeller locknut and washer
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Tab
Acciaio inox
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Fill/drain plugs
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Mechanical seal
Ceramic / Carbon / FPM (standard version)
Elastomers
FPM (standard version)
AISI 316L
Adapter *
Aluminium
EN 1706-AC-AlSi11Cu2 (Fe) (AC46100)
-
Adapter
Cast iron
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Adapter motor coupling
Cast iron
Galvanized steel
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Pump body fastening bolts & screws
* For the 25/32/40-125 2/4 pole, 25/32/40-160 2/4 pole, 25/32/40-200 2/4 pole versions
sh_shs-en_c_tm
11
SHS SERIES
LIST OF MODELS AND T
ABLE OF MA
TERIALS
TABLE
MATERIALS
DENOMINAZIONE MODELLI
SERIE SHS CON PIEDE DI
SOSTEGNO SUL MOTORE
VERSIONS
2 POLES
4 POLES
SHS 25-250/110
SHS 32-250/110
SHS 40-250/110A
SHS 40-250/110
SHS 40-250/150
SHS 50-200/110A
SHS 50-200/110
SHS 50-250/150
SHS 50-250/185
SHS 50-250/220
SHS 65-160/110A
SHS 65-160/110
SHS 65-200/150
SHS 65-200/185
SHS 65-200/220
SHS 65-250/300
SHS 65-250/370
SHS 80-160/110
SHS 80-160/150
SHS 80-160/185
SHS 80-200/220
SHS 80-200/300
SHS 80-200/370
SHS4 80-250/110
sh-shs-s-en_b_mo
MATERIALI SHS
REF.
NAME
REFERENCE STANDARDS
MATERIAL
N.
1
2
3
4
5
7
8
9
10
11
12
13
14
15
EUROPE
USA
Pump body
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 25-32-40-50-65(160)
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 65(200-250)-80
Stainless steel
EN 10213-4-GX5CrNiMo19-11-2 (1.4408) ASTM CF8M (cast AISI 316)
Seal housing
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
Wear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Counterwear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Rigid shaft coupling
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Impeller locknut and washer
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Tab
Acciaio inox
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Fill/drain plugs
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Mechanical seal
Ceramic / Carbon / FPM (standard version)
Elastomers
FPM (standard version)
AISI 316L
Adapter *
Aluminium
EN 1706-AC-AlSi11Cu2 (Fe) (AC46100)
-
Adapter
Cast iron
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Adapter motor coupling
Cast iron
Galvanized steel
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Pump body fastening bolts & screws
* For the 25/32/40-125 2/4 pole, 25/32/40-160 2/4 pole, 25/32/40-200 2/4 pole versions
sh_shs-en_c_tm
12
SHF BARE SHAF
T SERIES
SHAFT
LIST OF MODELS AND T
ABLE OF MA
TERIALS
TABLE
MATERIALS
DENOMINAZIONE MODELL
SERIE SHF
VERSIONS
SHF 25-125
SHF 25-160
SHF 25-200
SHF 25-250
SHF 32-125
SHF 32-160
SHF 32-200
SHF 32-250
SHF 40-125
SHF 40-160
SHF 40-200
SHF 40-250
SHF 50-125
SHF 50-160
SHF 50-200
SHF 50-250
SHF 65-160
SHF 65-200
SHF 65-250
SHF80-160
SHF 80-200
SHF 80-250
sh-shf-p-en_a_mo
MATERIALI SHF
REF.
NAME
REFERENCE STANDARDS
MATERIAL
N.
1
2
3
4
5
6
8
9
10
11
12
13
14
15
EUROPE
USA
Pump body
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 25-32-40-50-65(160)
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 65(200-250)-80
Stainless steel
EN 10213-4-GX5CrNiMo19-11-2 (1.4408) ASTM CF8M (cast AISI 316)
Seal housing
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
Wear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Counterwear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Shaft extension
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Impeller locknut and washer
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Tab
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Fill/drain plugs
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Mechanical seal
Ceramic / Carbon / FPM (standard version)
Elastomers
FPM (standard version)
AISI 316L
Adapter *
Aluminium
EN 1706-AC-AlSi11Cu2 (Fe) (AC46100)
-
Adapter
Cast iron
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Transmission support body
Cast iron
Galvanized steel
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Pump body fastening bolts & screws
* For the 25/32/40-125 2/4 pole, 25/32/40-160 2/4 pole, 25/32/40-200 2/4 pole versions
sh_shf-en_c_tm
13
SH MECHANICAL SEAL SERIES, ACCORDING TO EN 12756
Mechanical seal with mounting dimensions according to EN12756 (ex DIN 24960) and ISO 3069.
FIG. 1 (*)
FIG. 2 (**)
(*) Standard version
(**) Version with fixed assembly anti-rotation lockpin
TENUTA MECCANICA SH MATERIALI
LIST OF MA
TERIALS
MATERIALS
POSITION 1 - 2
POSITION 3
B : Resin impregnated carbon
Q 1 : Silicon carbide
V : Ceramic
E
V
POSITION 4 - 5
: EPDM
: FPM
G
: AISI 316
sh_ten-mec-en_a_tm
TENUTA MECCANICA SH COMBINAZIONI
SEAL TYPES
TYPE
1
2
ROTATING ASSEMBLY
FIXED ASSEMBLY
VB V G G
V
Q1 B V G G
Q1 Q1 V G G
VB E G G
Q1 B E G G
Q1 Q1 E G G
Q1
Q1
V
Q1
Q1
POSITION
3
ELASTOMERS
TEMPERATURE
4
5
SPRINGS
OTHER COMPONENTS
STANDARD MECHANICAL SEAL
B
V
G
OTHER MECHANICAL SEAL TYPES
B
V
G
Q1
V
G
B
E
G
B
E
G
Q1
E
G
( °C )
G
-10 +120
G
G
G
G
G
-10
-10
-30
-30
-30
+120
+120
+120
+120
+120
sh_tipi-ten-mec-en_a_tc
COMPLETE PUMP PRES
SURE / TEMPERA
TURE OPERA
TING LIMITS
PRESSURE
TEMPERATURE
OPERATING
(WITH ANY OF THE SEALS LISTED ABO
VE)
ABOVE)
14
MOTORS FOR SH SERIES
Standard supplied IE2/IE3 three-phase surface motors ≥ 0,75 kW are compliant with
Regulation (EC) no. 640/2009 and IEC 60034-30.
Enclosed short circuit squirrel cage motor (TEFC), with external ventilation.
Electrical performances according to EN 60034-1.
Insulation class 155 (F).
IP55 protection.
Condensate drain plugs on standard version.
Cooling by fan according to EN 60034-6.
Cable gland metric size according to EN 50262.
Standard voltage:
• Single-phase version: 220-240 V 50 Hz, with incorporated automatic-reset overload protection up to 1,5 kW.
• Three-phase version: 220-240/380-415 V 50 Hz for powers up to 3 kW. 380-415/660-690 V 50 Hz for powers
above 3 kW. Overload protection to be provided by the user.
MOTOR TYPE
kW
0,75
1,1
1,5
2,2
SM90RB14/107
SM90RB14/111
SM90RB14/115
PLM90B14/122
90R
90R
90R
90
Construction
Design
PN
IEC SIZE*
SHE SERIES
MOTORI MONOFASE PER SERIE SHE 50 Hz, 2 poli
SINGLE-PHASE MOTORS A
T 50 Hz, 2 POLES
AT
B14
B14
B14
B14
INPUT
CAPACITOR
DATA FOR 230 V 50 Hz VOLTAGE
CURRENT
In (A)
Tn
220-240 V
µF
V
min-1
ls / ln
η%
cosϕ
Nm
Ts/Tn
Tm/Tn
4,83-5,23
6,88-6,65
9,21-8,58
12,5-11,6
30
30
40
70
450
450
450
450
2875
2800
2810
2825
5,28
3,89
4,00
4,47
71,8
74,7
76,1
82,4
0,92
0,96
0,98
0,97
2,49
3,75
5,15
7,43
0,70
0,46
0,39
0,53
2,59
1,72
1,74
1,87
* R = Reduced size of motor casing as compared to shaft extension and flange.
she-motm-2p50-en_e_te
15
SHE
SERIES
MOTORI
TRIFASE PER SERIE SHE 50 Hz, 2 poli
THREE-PHASE MOTORS A
T 50 Hz, 2 POLES
AT
Year of
manufacture
Efficiency ηN
%
∆ 380 V
∆ 400 V
Y 380 V
Y 400 V
Y 415 V
Y 660 V
Y 690 V
∆ 415 V
IE
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
0,75
1,1
1,5
2,2
3
4
5,5
7,5
9,2
11
15
18,5
22
82,5
84,0
85,6
83,7
85,5
86,3
87,6
88,6
89,3
90,3
90,3
91,2
91,3
83,1
84,7
86,5
83,7
86,8
86,3
87,6
88,1
88,8
91,1
90,3
91,2
91,3
81,3
83,4
85,8
83,7
85,6
86,3
87,6
88,1
88,8
90,3
90,3
91,2
91,3
82,8
84,4
85,9
83,7
86,1
86,3
87,6
88,6
89,3
90,3
90,3
91,2
91,3
82,7
84,5
86,4
83,7
86,8
86,3
87,6
88,1
88,8
91,1
90,3
91,2
91,3
80,1
82,5
84,9
83,7
85,6
86,3
87,6
88,1
88,8
90,3
90,3
91,2
91,3
82,6
84,3
86,0
83,7
86,3
86,3
87,6
88,6
89,3
90,3
90,3
91,2
91,3
82,0
84,0
86,0
83,7
86,8
86,3
87,6
88,1
88,8
91,1
90,3
91,2
91,3
78,9
81,4
84,0
83,7
85,6
86,3
87,6
88,1
88,8
90,3
90,3
91,2
91,3
82,5
84,0
85,6
83,7
85,5
86,3
87,6
88,6
89,3
90,3
90,3
91,2
91,3
82,0
84,0
86,0
83,7
86,8
86,3
87,6
88,1
88,8
91,1
90,3
91,2
91,3
78,9
81,4
84,0
83,7
85,6
86,3
87,6
88,1
88,8
90,3
90,3
91,2
91,3
82,5
84,0
85,6
83,7
85,5
86,3
87,6
88,6
89,3
90,8
90,3
91,2
91,3
82,0
84,0
86,0
83,7
86,8
86,3
87,6
88,1
88,8
91,1
90,3
91,2
91,3
78,9
81,4
84,0
83,7
85,6
86,3
87,6
88,1
88,8
90,3
90,3
91,2
91,3
82,5
84,0
85,6
83,7
85,5
86,3
87,6
88,6
89,3
91,0
90,3
91,2
91,3
82,0
84,0
86,0
83,7
86,8
86,3
87,6
88,1
88,8
91,1
90,3
91,2
91,3
78,9
81,4
84,0
83,7
85,6
86,3
87,6
88,1
88,8
90,3
90,3
91,2
91,3
Manufacturer
PN
Lowara srl Unipersonale
Reg. No. 341820260
Montecchio Maggiore Vicenza - Italia
kW
Model
SM90RB14S/307PE
SM90RB14S/311PE
SM90RB14S/315PE
PLM90B14S/322
PLM90B14S/330
PLM112RB14S/340
PLM112B14S/355
PLM132B14S/375
PLM132B14S/392
PLM132B14S/3110
PLM160B34S/3150
PLM160B34S/3185
PLM160B34S/3220
0,75
1,1
1,5
2,2
3
4
5,5
7,5
9,2
11
15
18,5
22
90R
90R
90R
90
90
112R
112
132
132
132
160
160
160
SPECIAL
kW
N. of
Poles
2
TN
fN
Hz
cosϕ
ls / lN
Nm
Ts/TN
Tm/Tn
50
0,78
0,79
0,80
0,80
0,82
0,85
0,87
0,87
0,88
0,87
0,91
0,88
0,89
7,38
8,31
8,80
8,63
8,39
9,52
10,3
9,21
9,66
9,72
8,45
9,75
9,50
2,48
3,63
4,96
7,25
9,96
13,1
18,1
24,5
30,3
36,0
48,6
59,8
71,1
3,57
3,95
4,31
3,74
3,50
3,04
4,43
3,26
3,17
3,46
2,26
2,82
2,74
3,75
3,95
4,10
3,71
3,32
4,40
5,80
4,55
4,54
4,56
3,81
4,53
4,26
kW
0,75
1,1
1,5
2,2
3
4
5,5
7,5
9,2
11
15
18,5
22
∆
Y
Y
220 V 230 V 240 V 380 V 400 V 415 V 380 V 400 V 415 V 660 V 690 V
IN (A)
2,96
4,19
5,56
8,05
10,8
13,6
18,3
25,4
29,7
36,0
47,2
58,3
68,3
2,94
4,14
5,49
8,04
10,6
13,5
18,0
24,8
28,9
35,1
45,3
56,9
66,2
2,96
4,16
5,51
8,09
10,6
13,5
17,9
24,4
28,3
34,7
44,0
55,9
64,3
1,71
2,42
3,21
4,65
6,23
7,88
10,6
14,7
17,2
20,8
27,2
33,7
39,4
1,70
2,39
3,17
4,64
6,14
7,77
10,4
14,3
16,7
20,3
26,2
32,9
38,2
1,71
2,40
3,18
4,67
6,12
7,79
10,3
14,1
16,4
20,0
25,4
32,3
37,1
1,70
2,41
3,21
4,62
6,18
7,80
10,6
14,5
17,3
20,8
27,2
34,1
40,0
1,69
2,38
3,18
4,61
6,10
7,63
10,4
14,0
16,8
20,3
26,0
33,2
38,6
1,70
2,38
3,19
4,63
6,06
7,65
10,5
13,9
16,6
20,1
25,3
32,8
37,8
0,98
1,39
1,85
2,67
3,57
4,51
6,14
8,35
10,0
12,0
15,7
19,7
23,1
0,98
1,37
1,84
2,66
3,52
4,41
6,02
8,11
9,70
11,7
15,0
19,1
22,3
nN
-1
min
2875 ÷ 2895
2870 ÷ 2900
2870 ÷ 2895
2885 ÷ 2900
2850 ÷ 2885
2895 ÷ 2920
2885 ÷ 2905
2920 ÷ 2935
2910 ÷ 2930
2910 ÷ 2925
2940 ÷ 2950
2945 ÷ 2955
2945 ÷ 2955
Observe the regulations and codes locally
in force regarding sorted waste disposal.
Operating conditions **
V
∆
2
Data for 400 V / 50 Hz Voltage
Voltage UN
PN
3
By June 2011
∆ 240 V
Construction
Design
∆ 230 V
IEC SIZE*
PN
∆ 220 V
Altitude
T. amb
Above Sea
min/max
Level (m)
°C
” 1000
-15 / 40
ATEX
No
she-ie2-mott-2p50-en_c_te
* R = Reduced size of motor casing as compared to shaft extension and flange.
** Operating conditions to be referred to motor only. About electric pump, refer to limits in user’s manual.
16
SHS
SERIES
MOTORI
TRIFASE PER SERIE SHS 50 Hz, 2 poli
THREE-PHASE MOTORS A
T 50 Hz, 2 POLES
AT
Year of
manufacture
Efficiency ηN
%
∆ 380 V
∆ 400 V
Y 380 V
Y 400 V
Y 415 V
Y 660 V
Y 690 V
∆ 415 V
IE
kW
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
22
82,5
84,0
85,6
83,7
85,5
86,3
87,6
88,6
89,8
90,3
91,2
91,3
83,1
84,7
86,5
83,7
86,8
86,3
87,6
88,1
89,8
90,3
91,2
91,3
81,3
83,4
85,8
83,7
85,6
86,3
87,6
88,1
89,8
90,3
91,2
91,3
82,8
84,4
85,9
83,7
86,1
86,3
87,6
88,6
89,8
90,3
91,2
91,3
82,7
84,5
86,4
83,7
86,8
86,3
87,6
88,1
89,8
90,3
91,2
91,3
80,1
82,5
84,9
83,7
85,6
86,3
87,6
88,1
89,8
90,3
91,2
91,3
82,6
84,3
86,0
83,7
86,3
86,3
87,6
88,6
89,8
90,3
91,2
91,3
82,0
84,0
86,0
83,7
86,8
86,3
87,6
88,1
89,8
90,3
91,2
91,3
78,9
81,4
84,0
83,7
85,6
86,3
87,6
88,1
89,8
90,3
91,2
91,3
82,5
84,0
85,6
83,7
85,5
86,3
87,6
88,6
89,8
90,3
91,2
91,3
82,0
84,0
86,0
83,7
86,8
86,3
87,6
88,1
89,8
90,3
91,2
91,3
78,9
81,4
84,0
83,7
85,6
86,3
87,6
88,1
89,8
90,3
91,2
91,3
82,5
84,0
85,6
83,7
85,5
86,3
87,6
88,6
89,8
90,3
91,2
91,3
82,0
84,0
86,0
83,7
86,8
86,3
87,6
88,1
89,8
90,3
91,2
91,3
78,9
81,4
84,0
83,7
85,6
86,3
87,6
88,1
89,8
90,3
91,2
91,3
82,5
84,0
85,6
83,7
85,5
86,3
87,6
88,6
89,8
90,3
91,2
91,3
82,0
84,0
86,0
83,7
86,8
86,3
87,6
88,1
89,8
90,3
91,2
91,3
78,9
81,4
84,0
83,7
85,6
86,3
87,6
88,1
89,8
90,3
91,2
91,3
Model
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
22
SM80B5/307PE
SM80B5/311PE
SM90RB5/315PE
PLM90B5/322
PLM100RB5/330
PLM112RB5/340
PLM132RB5/355
PLM132B5/375
PLM160B35/3110
PLM160B35/3150
PLM160B35/3185
PLM180RB35/3220
80
80
90R
90
100R
112R
132R
132
160
160
160
180R
N. of
Poles
TN
fN
Hz
cosϕ
ls / lN
Nm
Ts/TN
Tm/Tn
50
0,78
0,79
0,80
0,80
0,82
0,85
0,87
0,87
0,88
0,91
0,88
0,89
7,38
8,31
8,80
8,63
8,39
9,52
10,3
9,21
8,14
8,45
9,75
9,50
2,48
3,63
4,96
7,25
9,96
13,1
18,1
24,5
35,6
48,6
59,8
71,1
3,57
3,95
4,31
3,74
3,50
3,04
4,43
3,26
2,22
2,26
2,82
2,74
3,75
3,95
4,10
3,71
3,32
4,40
5,80
4,55
4,00
3,81
4,53
4,26
B5
PN
kW
2
V
∆
kW
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
22
∆
Y
Y
220 V 230 V 240 V 380 V 400 V 415 V 380 V 400 V 415 V 660 V 690 V
IN (A)
2,96
4,19
5,56
8,05
10,8
13,6
18,3
25,4
35,5
47,2
58,3
68,3
2,94
4,14
5,49
8,04
10,6
13,5
18,0
24,8
34,3
45,3
56,9
66,2
2,96
4,16
5,51
8,09
10,6
13,5
17,9
24,4
33,4
44,0
55,9
64,3
1,71
2,42
3,21
4,65
6,23
7,88
10,6
14,7
20,5
27,2
33,7
39,4
1,70
2,39
3,17
4,64
6,14
7,77
10,4
14,3
19,8
26,2
32,9
38,2
1,71
2,40
3,18
4,67
6,12
7,79
10,3
14,1
19,3
25,4
32,3
37,1
1,70
2,41
3,21
4,62
6,18
7,80
10,6
14,5
20,6
27,2
34,1
40,0
1,69
2,38
3,18
4,61
6,10
7,63
10,4
14,0
19,9
26,0
33,2
38,6
1,70
2,38
3,19
4,63
6,06
7,65
10,5
13,9
19,5
25,3
32,8
37,8
0,98
1,39
1,85
2,67
3,57
4,51
6,14
8,35
11,9
15,7
19,7
23,1
0,98
1,37
1,84
2,66
3,52
4,41
6,02
8,11
11,5
15,0
19,1
22,3
* R = Reduced size of motor casing as compared to shaft extension and flange.
nN
min-1
2875 ÷ 2895
2870 ÷ 2900
2870 ÷ 2895
2885 ÷ 2900
2850 ÷ 2885
2895 ÷ 2920
2885 ÷ 2905
2920 ÷ 2935
2940 ÷ 2950
2940 ÷ 2950
2945 ÷ 2955
2945 ÷ 2955
Observe the regulations and codes locally
in force regarding sorted waste disposal.
Voltage UN
PN
2
Data for 400 V / 50 Hz Voltage
B35
Manufacturer
Lowara srl Unipersonale
Reg. No. 341820260
Montecchio Maggiore Vicenza - Italia
3
By June 2011
∆ 240 V
Construction
Design
∆ 230 V
IEC SIZE*
PN
∆ 220 V
Operating conditions **
Altitude
T. amb
Above Sea
min/max
Level (m)
°C
” 1000
-15 / 40
ATEX
No
shs-ie2-mott-2p50-en_b_te
** Operating conditions to be referred to motor only. About electric pump, refer to limits in user’s manual.
17
SHF
SERIES
MOTORI
TRIFASE PER SERIE SHF 50 Hz, 2 poli (fino a 18,5 kW)
THREE-PHASE MOTORS A
T 50 Hz, 2 POLES (up to 18,5 kW)
AT
Year of
manufacture
Efficiency ηN
%
∆ 380 V
∆ 400 V
Y 380 V
Y 400 V
Y 415 V
Y 660 V
Y 690 V
∆ 415 V
IE
kW
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
82,5
84,0
81,8
83,7
85,1
86,3
87,6
88,6
89,8
90,3
91,2
83,1
84,7
81,8
83,7
85,1
86,3
87,6
88,1
89,8
90,3
91,2
81,3
83,4
81,8
83,7
85,1
86,3
87,0
88,1
89,8
90,3
91,2
82,8
84,4
81,8
83,7
85,1
86,3
87,6
88,6
89,8
90,3
91,2
82,7
84,5
81,8
83,7
85,1
86,3
87,6
88,1
89,8
90,3
91,2
80,1
82,5
81,8
83,7
85,1
86,3
87,0
88,1
89,8
90,3
91,2
82,6
84,3
81,8
83,7
85,1
86,3
87,6
88,6
89,8
90,3
91,2
82,0
84,0
81,8
83,7
85,1
86,3
87,6
88,1
89,8
90,3
91,2
78,9
81,4
81,8
83,7
85,1
86,3
87,0
88,1
89,8
90,3
91,2
82,5
84,0
81,8
83,7
85,1
86,3
87,6
88,6
89,8
90,3
91,2
82,0
84,0
81,8
83,7
85,1
86,3
87,6
88,1
89,8
90,3
91,2
78,9
81,4
81,8
83,7
85,1
86,3
87,0
88,1
89,8
90,3
91,2
82,5
84,0
81,8
83,7
85,1
86,3
87,6
88,6
89,8
90,3
91,2
82,0
84,0
81,8
83,7
85,1
86,3
87,6
88,1
89,8
90,3
91,2
78,9
81,4
81,8
83,7
85,1
86,3
87,0
88,1
89,8
90,3
91,2
82,5
84,0
81,8
83,7
85,1
86,3
87,6
88,6
89,8
90,3
91,2
82,0
84,0
81,8
83,7
85,1
86,3
87,6
88,1
89,8
90,3
91,2
78,9
81,4
81,8
83,7
85,1
86,3
87,0
88,1
89,8
90,3
91,2
PN
kW
Model
SM80B3/307PE
SM80B3/311PE
PLM90B3/315
PLM90B3/322
PLM100B3/330
PLM112B3/340
PLM132B3/355
PLM132B3/375
PLM160B3/3110
PLM160B3/3150
PLM160B3/3185
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
80
80
90
90
100
112
132
132
160
160
160
B3
N. of
Poles
2
TN
fN
Hz
cosϕ
ls / lN
Nm
Ts/TN
Tm/Tn
50
0,78
0,79
0,86
0,80
0,84
0,87
0,83
0,87
0,88
0,91
0,88
7,38
8,31
7,86
8,63
9,45
9,16
9,93
9,21
8,14
8,45
9,75
2,48
3,63
4,96
7,25
9,83
13,2
17,9
24,5
35,6
48,6
59,8
3,57
3,95
3,34
3,74
3,59
3,60
3,34
3,26
2,22
2,26
2,82
3,75
3,95
3,27
3,71
4,27
4,59
4,66
4,55
4,00
3,81
4,53
Voltage UN
V
∆
PN
kW
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
∆
Y
Y
220 V 230 V 240 V 380 V 400 V 415 V 380 V 400 V 415 V 660 V 690 V
IN (A)
2,96
4,19
5,53
8,05
10,4
13,3
19,2
25,4
35,5
47,2
58,3
2,94
4,14
5,23
8,04
10,2
13,0
19,1
24,8
34,3
45,3
56,9
2,96
4,16
5,13
8,09
10,3
12,9
19,2
24,4
33,4
44,0
55,9
1,71
2,42
3,19
4,65
5,98
7,67
11,1
14,7
20,5
27,2
33,7
1,70
2,39
3,02
4,64
5,91
7,50
11,0
14,3
19,8
26,2
32,9
1,71
2,40
2,96
4,67
5,92
7,43
11,1
14,1
19,3
25,4
32,3
1,70
2,41
3,19
4,62
6,01
7,68
10,9
14,5
20,6
27,2
34,1
1,69
2,38
3,03
4,61
5,95
7,51
10,8
14,0
19,9
26,0
33,2
2
Data for 400 V / 50 Hz Voltage
1,70
2,38
2,96
4,63
5,96
7,45
10,8
13,9
19,5
25,3
32,8
0,98
1,39
1,84
2,67
3,47
4,44
6,30
8,35
11,9
15,7
19,7
0,98
1,37
1,75
2,66
3,44
4,34
6,22
8,11
11,5
15,0
19,1
** Operating conditions to be referred to motor only. About electric pump, refer to limits in user’s manual.
18
nN
-1
min
2875 ÷ 2895
2870 ÷ 2900
2865 ÷ 2895
2885 ÷ 2900
2905 ÷ 2920
2890 ÷ 2905
2930 ÷ 2945
2920 ÷ 2935
2940 ÷ 2950
2940 ÷ 2950
2945 ÷ 2955
Observe the regulations and codes locally
in force regarding sorted waste disposal.
Manufacturer
Lowara srl Unipersonale
Reg. No. 341820260
Montecchio Maggiore Vicenza - Italia
3
By June 2011
∆ 240 V
Construction
Design
∆ 230 V
IEC SIZE
PN
∆ 220 V
Operating conditions **
Altitude
T. amb
Above Sea
min/max
Level (m)
°C
” 1000
-15 / 40
ATEX
No
shf-ie2-mott18-2p50-en_b_te
SHS-SHF
SERIES
MOTORI TRIFASE
PER SERIE SHS-SHF 50 Hz, 2 poli (da 22kW fino a75kW)
THREE-PHASE MOTORS A
T 50 Hz, 2 POLES (from 22 to 75 kW)
AT
Year of
manufacture
Efficiency ηN
%
∆ 400 V
Y 660 V
Y 690 V
∆ 415 V
IE
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
22
30
37
45
55
75
91,8
92,6
93,0
93,2
93,6
94,1
92,2
92,9
93,3
93,5
93,8
94,3
92,2
92,7
93,2
93,4
93,8
93,6
92,0
92,5
93,0
93,3
93,6
93,4
92,4
93,0
93,4
93,6
93,9
94,3
92,2
92,9
93,3
93,6
93,9
94,3
92,4
93,0
93,5
93,8
94,0
94,3
92,4
93,0
93,4
93,6
93,8
94,2
91,8
92,3
92,8
93,1
93,3
93,2
PN
WEG Equipamentos Eletricos S.A.
Reg. No. 07.175.725/0010-50
Jaragua do Sul - SC (Brazil)
kW
Model
22
30
37
45
55
75
W22 180M2-B3 22kW
W22 200L2-B3 (B35) 30kW
W22 200L2-B3 (B35) 37kW
W22 225S/M2-B3 45kW
W22 250S/M2-B3 55kW
W22 280S/M2-B3 75kW
IEC SIZE
Manufacturer
180
200
200
225
250
280
Construction
Design
kW
N. of
Poles
B3
B3
B35
2
TN
fN
Hz
cosϕ
ls / lN
Nm
Ts/TN
Tm/Tn
50
0,88
0,87
0,87
0,89
0,89
0,89
7,30
6,50
6,80
7,00
7,00
7,00
71,40
97,00
120,0
145,0
178,0
241,0
2,20
2,40
2,40
2,20
2,20
2,00
3,00
2,70
2,60
2,80
2,80
2,80
B3
Operating conditions **
V
∆
400 V
40,90
55,90
68,70
81,50
99,20
135,00
39,10
53,60
65,80
78,00
95,00
129,00
kW
22
30
37
45
55
75
Y
415 V
IN (A)
660 V
690 V
nN
38,10
52,20
64,00
75,80
92,50
126,00
23,55
32,18
39,.55
46,92
57,12
77-73
22,67
31,07
38,14
45,22
55,07
74,78
2940 ÷ 2950
2950 ÷ 2960
2945 ÷ 2955
2955 ÷ 2960
2955 ÷ 2960
2970 ÷ 2975
-1
min
** Operating conditions to be referred to motor only. About electric pump, refer to limits in user’s manual.
Note: Observe the regulations and codes locally in force regarding sorted waste disposal.
19
See note.
380 V
2
Data for 400 V / 50 Hz Voltage
Voltage UN
PN
By June 2011
PN
∆ 380 V
Altitude
T. amb
Above Sea
min/max
Level (m)
°C
” 1000
-15 / 40
ATEX
No
shf-ie2-mott75-2p50-en_a_te
SHE4
MOTORISERIES
TRIFASE PER SERIE SHE 50 Hz, 4 poli
THREE-PHASE MOTORS A
T 50 Hz, 4 POLES
AT
Year of
manufacture
Efficiency ηN
%
∆ 380 V
∆ 400 V
Y 380 V
Y 400 V
Y 415 V
Y 660 V
Y 690 V
∆ 415 V
IE
kW
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
80,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,3
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
79,8
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
81,1
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
79,1
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
81,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,2
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
78,4
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
80,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,2
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
78,4
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
80,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,2
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
78,4
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
80,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,2
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
78,4
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
PN
kW
Model
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
SM471B5/302
SM471B5/304
SM490RB14S/305
LLM490RB5S/307
PLM490B5S/311
PLM490B5S/315
PLM4100B5S/322
PLM4100B5S/330
PLM4112B5S/340
PLM4132B14S/355
PLM4132B14S/375
PLM4160B34S/3110
71
71
90R
90R
90
90
100
100
112
132
132
160
N. of
Poles
TN
fN
Hz
cosϕ
ls / lN
Nm
Ts/TN
Tm/Tn
50
0,59
0,60
0,67
0,75
0,72
0,67
0,77
0,73
0,78
0,78
0,78
0,83
3,58
3,39
3,95
5,78
6,34
6,79
7,50
7,84
7,91
7,89
7,71
6,94
1,71
2,57
3,77
5,03
7,27
9,88
14,4
19,6
26,3
35,9
49,1
71,6
3,16
3,40
2,45
2,77
2,80
3,33
2,71
2,96
2,86
2,79
2,75
2,34
2,63
2,47
2,38
3,31
3,43
3,67
3,97
4,09
3,94
3,47
3,63
3,02
4
V
∆
kW
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
∆
Y
Y
220 V 230 V 240 V 380 V 400 V 415 V 380 V 400 V 415 V 660 V 690 V
IN (A)
1,68
2,46
2,98
3,08
4,64
6,50
8,49
12,0
15,5
20,4
27,4
38,3
1,71
2,53
3,03
3,03
4,61
6,51
8,31
11,9
15,3
19,9
26,8
37,9
1,77
2,62
3,1
3,01
4,61
6,62
8,24
12,0
15,2
19,6
26,4
37,9
0,97
1,42
1,72
1,78
2,68
3,75
4,90
6,91
8,93
11,8
15,8
22,1
0,99
1,46
1,75
1,75
2,66
3,76
4,80
6,89
8,82
11,5
15,5
21,9
1,02
1,51
1,79
1,74
2,66
3,82
4,76
6,94
8,78
11,3
15,2
21,9
1,78
2,66
3,74
4,87
6,88
8,80
11,9
15,9
21,8
1,75
2,64
3,75
4,78
6,86
8,64
11,5
15,6
21,2
1,74
2,64
3,80
4,72
6,90
8,60
11,5
15,4
21,1
1,03
1,54
2,16
2,81
3,97
5,08
6,85
9,20
12,6
1,01
1,53
2,16
2,76
3,96
4,99
6,66
8,98
12,3
nN
-1
min
1375 ÷ 1400
1355 ÷ 1380
1380 ÷ 1400
1410 ÷ 1430
1435 ÷ 1445
1440 ÷ 1450
1445 ÷ 1455
1455 ÷ 1465
1445 ÷ 1455
1455 ÷ 1465
1450 ÷ 1460
1465 ÷ 1470
Observe the regulations and codes locally
in force regarding sorted waste disposal.
Voltage UN
PN
2
Data for 400 V / 50 Hz Voltage
B5
SPECIAL
Manufacturer
Lowara srl Unipersonale
Reg. No. 341820260
Montecchio Maggiore Vicenza - Italia
By June 2011
∆ 240 V
Construction
Design
∆ 230 V
IEC SIZE*
PN
∆ 220 V
Operating conditions **
Altitude
T. amb
Above Sea
min/max
Level (m)
°C
” 1000
-15 / 40
ATEX
No
she-ie2-mott-4p50-en_b_te
* R = Reduced size of motor casing as compared to shaft extension and flange.
** Operating conditions to be referred to motor only. About electric pump, refer to limits in user’s manual.
20
SHS4-SHF4
SERIES
MOTORI TRIFASE
PER SERIE SHS4-SHF4 50 Hz, 4 poli (fino a 11 kW)
THREE-PHASE MOTORS A
T 50 Hz, 4 POLES (up to 11 kW)
AT
Year of
manufacture
Efficiency ηN
%
∆ 380 V
∆ 400 V
Y 380 V
Y 400 V
Y 415 V
Y 660 V
Y 690 V
∆ 415 V
IE
kW
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
80,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,3
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
79,8
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
81,1
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
79,1
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
81,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,2
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
78,4
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
80,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,2
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
78,4
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
80,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,2
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
78,4
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
80,4
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
81,2
81,4
83,1
84,7
85,5
86,6
88,0
88,7
89,8
78,4
81,1
82,0
84,7
84,1
86,6
88,0
88,7
89,8
Model
SM471B3/302
SM471B3/304
SM480B3 (B5 )/305
LLM480B3 (B5) /307
PLM490B3 (B5) /311
PLM490B3 (B5) /315
PLM4100B3 (B5) /322
PLM4100B3 (B5) /330
PLM4112B3 (B5) /340
PLM4132B3 (B5) /355
PLM4132B3 (B5) /375
PLM4160B3 (B5) /3110
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
71
71
80
80
90
90
100
100
112
132
132
160
N. of
Poles
TN
fN
Hz
cosϕ
ls / lN
Nm
Ts/TN
Tm/Tn
50
0,59
0,60
0,67
0,75
0,72
0,67
0,77
0,73
0,78
0,78
0,78
0,83
3,58
3,39
3,95
5,78
6,34
6,79
7,50
7,84
7,91
7,89
7,71
6,94
1,71
2,57
3,77
5,03
7,27
9,88
14,4
19,6
26,3
35,9
49,1
71,6
3,16
3,40
2,45
2,77
2,80
3,33
2,71
2,96
2,86
2,79
2,75
2,34
2,63
2,47
2,38
3,31
3,43
3,67
3,97
4,09
3,94
3,47
3,63
3,02
4
V
∆
kW
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
∆
Y
Y
220 V 230 V 240 V 380 V 400 V 415 V 380 V 400 V 415 V 660 V 690 V
IN (A)
1,68
2,46
2,98
3,08
4,64
6,50
8,49
12,0
15,5
20,4
27,4
38,3
1,71
2,53
3,03
3,03
4,61
6,51
8,31
11,9
15,3
19,9
26,8
37,9
1,77
2,62
3,10
3,01
4,61
6,62
8,24
12,0
15,2
19,6
26,4
37,9
0,97
1,42
1,72
1,78
2,68
3,75
4,90
6,91
8,93
11,8
15,8
22,1
0,99
1,46
1,75
1,75
2,66
3,76
4,80
6,89
8,82
11,5
15,5
21,9
1,02
1,51
1,79
1,74
2,66
3,82
4,76
6,94
8,78
11,3
15,2
21,9
1,78
2,66
3,74
4,87
6,88
8,80
11,9
15,9
21,8
1,75
2,64
3,75
4,78
6,86
8,64
11,5
15,6
21,2
1,74
2,64
3,80
4,72
6,90
8,60
11,5
15,4
21,1
1,03
1,54
2,16
2,81
3,97
5,08
6,85
9,20
12,6
1,01
1,53
2,16
2,76
3,96
4,99
6,66
8,98
12,3
** Operating conditions to be referred to motor only. About electric pump, refer to limits in user’s manual.
21
nN
-1
min
1375 ÷ 1400
1355 ÷ 1380
1380 ÷ 1400
1410 ÷ 1430
1435 ÷ 1445
1440 ÷ 1450
1445 ÷ 1455
1455 ÷ 1465
1445 ÷ 1455
1455 ÷ 1465
1450 ÷ 1460
1465 ÷ 1470
Observe the regulations and codes locally
in force regarding sorted waste disposal.
Voltage UN
PN
2
Data for 400 V / 50 Hz Voltage
B3
PN
kW
B3 / B5
Manufacturer
Lowara srl Unipersonale
Reg. No. 341820260
Montecchio Maggiore Vicenza - Italia
By June 2011
∆ 240 V
Construction
Design
∆ 230 V
IEC SIZE
PN
∆ 220 V
Operating conditions **
Altitude
T. amb
Above Sea
min/max
Level (m)
°C
” 1000
-15 / 40
ATEX
No
shf-ie2-mott11-4p50-en_a_te
MOTOR NOISE
The tables below show the mean sound pressure levels (Lp) measured at 1 meter’s distance in a free field according
to the A curve (ISO 1680 standard).
The noise values are measured with idling 50 Hz motor with a tolerance of 3 dB (A).
SHF
MOTORS
RUMOROSITA' MOTORI SHF
22POLI
POLES
50Hz 50 Hz
SHE-SHS
MOTORS
RUMOROSITA' MOTORI SHE-SHS
22POLI
POLES
50Hz 50 Hz
POWER
MOTOR TYPE
NOISE
POWER
MOTOR TYPE
NOISE
LpA
LpA
kW
IEC* SIZE
dB
kW
IEC SIZE
dB
0,75
1,1
1,5
2,2
3
3
4
5,5
5,5
7,5
9,2
11
11
11
15
18,5
22
22
30
37
90R
90R
90R - 90
90
90
100R
112R
112
132R
132
132
132
160R
160
160
160
160
180R
200
200
<70
<70
<70
<70
<70
<70
<70
<70
<70
71
73
73
73
71
71
73
70
70
72
72
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
22
30
37
45
55
75
80
80
90
90
100
112
132
132
160
160
160
180
200
200
225
250
280
<70
<70
<70
<70
<70
<70
71
71
71
71
73
67
72
72
75
75
77
SHE4
MOTORS
RUMOROSITA'
MOTORI SHE4
44POLI
POLES
50Hz50 Hz
POWER
MOTOR TYPE
SHS4-SHF4
MOTORS
RUMOROSITA' MOTORI
SHF4-SHS4
44POLI
POLES
50Hz50 Hz
NOISE
POWER
MOTOR TYPE
LpA
NOISE
LpA
kW
IEC* SIZE
dB
kW
IEC SIZE
dB
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
71
71
90R
90R
90
90
100
100
112
132
132
160
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
71
71
80
80
90
90
100
100
112
132
132
160
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
*R=Reduced size of motor as compared to shaft extension and flange.
she-shs-shf_mott-en_d_tr
22
AVAILABLE V
OL
TAGES
VOL
OLT
MOTORS FOR SH SERIES (up to 22 kW)
SINGLE-PHASE
THREE-PHASE - 2 POLES
s = Standard voltage
3 x 440-460-480/-
3 x 110-115/190-200
3 x 200-208/346-360
3 x 330-346/575-600
3 x 575/-
3 x 230/400 50 Hz
3 x 265/460 60 Hz
3 x 400/690 50 Hz
3 x 460/- 60 Hz
o
o
o
-
3 x 380-400/660-690
-
3 x 255-265-277/440-460-480
o
o
o
-
3 x 220-230/380-400
-
3 x 500-525/-
1 x 200-210
s
s
s
s
3 x 440-460/-
1 x 120-127
o
o
-
3 x 290-300/500-525
1x 110-115
-
3 x 255-265/440-460
1 x 100
s
s
s
s
PN
kW
3 x 200-208/346-360
1 x 220-230
80
80
80
90
50/60 Hz
3 x 380-400-415/660-690
1 x 110-120
0,75
1,1
1,5
2,2
60 Hz
3 x 220-230-240/380-400-415
PN
kW
1 x 100
50 Hz
1 x 220-240
60 Hz
IEC SIZE
50 Hz
0,75
1,1
1,5
2,2
3
4
5,5
7,5
9,2
11
15
18,5
22
s
s
s
s
s
o
o
o
o
o
o
o
o
o
o
o
o
o
s
s
s
s
s
s
s
s
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
s
s
s
s
s
s
s
s
s
s
s
s
s
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o = Optional voltage
- = Not available
sh-volt-lowa-en_a_te
MOTORS FOR SH SERIES ((≥
≥ 22 kW)
THREE-PHASE - 2 POLES
PN
kW
3 x 110/190
3 x 200-208/346-360
3 x 255-265/440-460
3 x 290-300/500-525
3 x 440-460/-
3 x 500-525/-
3 x 230/380
3 x 380-400/660-690
3 x 440-480/-
3 x 110-115/190-200
3 x 200-208/346-360
3 x 255-265-277/440-460-480
3 x 330-346/575-600
3 x 575/-
3 x 230/400 50 Hz
3 x 265/460 60 Hz
3 x 400/690 50 Hz
3 x 460/- 60 Hz
50/60 Hz
3 x 380-400-415/660-690
60 Hz
3 x 220-230-240/380-400-415
50 Hz
22
30
37
45
55
75
o
o
o
o
o
o
s
s
s
s
s
s
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
s
s
s
s
s
s
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
s = Standard voltage
o = Optional voltage
- = Not available
23
sh-volt-weg-en_b_te
SHE-SHS-SHF SERIES
HYDRA
ULIC PERFORMANCE RANGE A
T 50 Hz, 2 POLES
HYDRAULIC
AT
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
24
SHE-SHS-SHF SERIES
TABELLA DI PRESTAZIONI IDRAULICHE SERIE SHE-SHS-SHF 2 poli 50 Hz
TABLE OF HYDRA
ULIC PERFORMANCES A
T 50 Hz, 2 POLES
HYDRAULIC
AT
PUMP
RATED
TYPE
POWER
kW
25-125/07 *
0,75
25-125/11 *
1,1
25-160/15 *
1,5
25-160/22 *
2,2
25-200/30
3
25-200/40
4
25.250/55
5,5
25-250/75
7,5
25-250/110
11
32-125/07 *
0,75
32-125/11 *
1,1
32-160/15 *
1,5
32-160/22 *
2,2
32-200/30
3
32-200/40
4
32-250/55
5,5
32-250/75
7,5
32-250/110
11
40-125/11 *
1,1
40-125/15 *
1,5
40-125/22 *
2,2
40-160/30
3
40-160/40
4
40-200/55
5,5
40-200/75
7,5
40-250/ **
**
40-250/110
11
40-250/150
15
50-125/22 *
2,2
50-125/30
3
50-125/40
4
50-160/55
5,5
50-160/75
7,5
50-200/ **
**
50-200/110
11
50-250/150
15
50-250/185
19
50-250/220
22
65-160/40
4
65-160/55
5,5
65-160/75
7,5
65-160/ **
**
65-160/110
11
65-200/150
15
65-200/185
19
65-200/220
22
65-250/300
30
65-250/370
37
80-160/110
11
80-160/150
15
80-160/185
19
80-200/220
22
80-200/300
30
80-200/370
37
80-250/450*** 45
80-250/550*** 55
80-250/750*** 75
*
Q = DELIVERY
l/min 0
150
200
250
300
400
450
600
700
800
900
1000
1200
1500
1800
2000
2500
3150
3700
m3/h 0
9
12
15
18
24
27
36
42
48
54
60
72
90
108
120
150
189
222
H = TOTAL HEAD METRES COLUMN OF WATER
HP
1
1,5
2
3
4
5,5
7,5
10
15
1
1,5
2
3
4
5,5
7,5
10
15
1,5
2
3
4
5,5
7,5
10
**
15
20
3
4
5,5
7,5
10
**
15
20
25
30
5,5
7,5
10
**
15
20
25
30
40
50
15
20
25
30
40
50
60
75
100
17,3
22,3
27,7
34,6
44,9
54,5
61,4
75,9
87,5
16,6
21,6
27,6
35
43,7
53,5
61,7
74,1
86,2
14,4
17,5
25,3
32,2
38
49,1
58,2
64,9
74,7
87,7
17,2
21,7
25,7
34,1
40,8
53
60,1
70,2
80
88,9
19,6
24,2
28,2
38,2
43,2
53
60,2
68
84,3
98
33,6
40,3
47,2
53
63,6
71,4
83,5
95,7
112
14,2
18,9
24,8
31,5
39,2
49,4
55,8
69,3
81,5
14,4
19,4
24,6
32,5
38,5
49
56,7
68,9
80,1
12,5
17
22,9
29,4
36,7
46,8
53,2
66,5
78,7
13
17,8
22,7
31
36
46,8
54,2
66,2
77,5
10,5
14,7
20,5
27
33,8
43,8
50,3
63,2
75,4
11,3
16,2
20,6
29
33
44
51,2
63
74,3
8,4
12,3
17,9
24,2
30,4
40,3
47
59,6
71,8
9,5
14,2
18,1
26,6
30
41
47,9
60
71
12,5
16
22,2
29,5
35,5
46,4
55,1
62
71,4
84,2
11,9
17,7
22,4
31,9 27
39,2
51,1
63,3 58,4
9,8
12,7
21
22,3
33,8
40
52,2
63,3
10,9
14,4
20,4
26,9
33,2
43,8
52,3
59,5
69
81,5
18
28,8
58,7
10
13,4
19,5
25,4
31,7
42
50,8
58
67,8
80
7
10,2
15,9
20,8
26,7
36,2
45
51,5
61,5
74,3
14,6
18,8
23,3
30,6
37,5
47,5
55
66,6
75
84,6
8
13,2
17
22,8
31
40
44,6
55,2
69,2
13,4
17,5
22,2
29,2
36,2
45,3
52,8
65
73,2
82,8
18,5
25
34,5
62,5
12,2
16,3
20,8
27,6
34,8
42,8
50,3
63,3
71,4
80,7
16,8
21,4
26
35,4
40,8
11
14,8
19,3
25,8
33
40
47,5
61
69
78,5
16
20,7
25,3
34,3
39,8
48,8
56,5
64,4
9,5
13,4
18
24
31,2
36,8
44,3
58,3
66,3
75,8
15,2
19,8
24,7
33
38,5
47,5
55,3
63,3
81,7
95,3
A single-phase version ( SHEM ) is also available
** /92 = 9.2kW - 12.5HP SHE
18,6
10,8
15,2
20
25,5
30,6
38,5
47
55
75
88
30
37
44
49,8
61,2
69,5
80,5
93,6
110
7,6
11,8
16,8
20
25,4
32
40
49
69
82,5
27,5
34,5
41,5
47,5
59
67,5
78
91
108
14,5
21,4
35,4
44,5
64
78
25,5
33
40
46
57
66
76
89
106
20,5
27,5
35
41
52
61
70
83,5
101
12,5
20
27,5 19,5
33,5
44 36,5
53,5 46
61
75 64,6
92
82
she-shs-shf-2p50-en_e_th
** /110 = 11kW - 15HP SHS
*** Only the SHF version is available
6,5
10,5
15
19,8
27
29,8
37,5
51
59,5
69,5
13,5
18
23
30
35,5
44,3
52
60
79,5
93
31,9
38,8
45,7
Performances accordin to ISO standards 9906 - Annex A.
25
SHE4-SHS4-SHF4 SERIES
HYDRA
ULIC PERFORMANCE RANGE A
T 50 Hz, 4 POLES
HYDRAULIC
AT
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
26
SHE4-SHS4-SHF4 SERIES
TABELLA DI PRESTAZIONI IDRAULICHE SERIE SHE4-SHS4-SHF4 4 poli 50 Hz
TABLE OF HYDRA
ULIC PERFORMANCES A
T 50 Hz, 4 POLES
HYDRAULIC
AT
PUMP
RATED
TYPE
POWER
25-125/02A *
25-125/02 *
25-160/02 *
25-160/03 *
25-200/03 *
25-200/05 *
25-250/07
25-250/11
25-250/15
32-125/02A *
32-125/02 *
32-160/02 *
32-160/03 *
32-200/03 *
32-200/05 *
32-250/07
32-250/11
32-250/15
40-125/02A *
40-125/02 *
40-125/03 *
40-160/03 *
40-160/05 *
40-200/07
40-200/11
40-250/11
40-250/15
40-250/22
50-125/03A *
50-125/03 *
50-125/05 *
50-160/07
50-160/11
50-200/11
50-200/15
50-250/22A
50-250/22
50-250/30
65-160/05
65-160/07
65-160/11A
65-160/ 11
65-160/15
65-200/15
65-200/22
65-200/30
65-250/40
65-250/55
80-160/15
80-160/22A
80-160/22
80-200/30
80-200/40
80-250/55
80-250/75
80-250/110
kW
HP
0,25
0,25
0,25
0,37
0,37
0,55
0,75
1,1
1,5
0,25
0,25
0,25
0,37
0,37
0,55
0,75
1,1
1,5
0,25
0,25
0,37
0,37
0,55
0,75
1,1
1,1
1,5
2,2
0,37
0,37
0,55
0,75
1,1
1,1
1,5
2,2
2,2
3
0,55
0,75
1,1
1,1
1,5
1,5
2,2
3
4
5,5
1,5
2,2
2,2
3
4
5,5
7,5
11
0,33
0,33
0,33
0,5
0,5
0,75
1
1,5
2
0,33
0,33
0,33
0,5
0,5
0,75
1
1,5
2
0,33
0,33
0,5
0,5
0,75
1
1,5
1,5
2
3
0,5
0,5
0,75
1
1,5
1,5
2
3
3
4
0,75
1
1,5
1,5
2
2
3
4
5,5
7,5
2
3
3
4
5,5
7,5
1
15
Q = DELIVERY
l/min 0
75
100
125
150
200
250
300
350
400
450
500
600
750
1000
1200
1800
2000
2200
m3/h 0
4,5
6
7,5
9
12
15
18
21
24
27
30
36
45
60
72
108
120
132
3,4
3,4
4,9
5,1
7,8
11,7
15
19
6
7,5
9
10,8
14,3
18,4
21,3
25,2
9,3
12
16,4
5,2
6,5
8
9,8
11,3
17,3
20,3
24,2
3,2
4,5
6,1
9,7
12,3
16,1
20,2
H = TOTAL HEAD METRES COLUMN OF WATER
4,4
5,6
6,9
8,6
11
13,4
14,9
18,8
21,5
4,4
5,5
6,9
8,6
10,8
13,2
14,5
18,4
21,3
3,5
5,4
6,3
8
9,2
11,9
14,2
15,7
18,1
21,5
4,4
5,4
6,4
8,2
9,9
12,8
14,7
17,5
19,4
21,9
5,4
6,4
7,6
9,4
10,6
11,9
14,4
17,5
20,7
24
8,3
9,6
11
12,9
16,1
20,3
23,1
26,7
3,8
4,8
6,1
7,8
9,4
12
13,3
17,1
19,9
3,9
5
5,9
7,8
9,4
12
13
16,8
19,7
3,4
4,3
5,6
7,2
8,7
11,3
12,6
16,3
19,1
3,6
4,7
5,4
7,4
8,7
11,3
12,3
16,1
19
2,9
3,8
5,1
6,6
8
10,5
11,9
15,5
18,3
3,1
4,3
4,9
6,9
7,9
10,6
11,6
15,3
18,2
2,4
3,2
4,4
5,9
7,1
9,6
11
14,6
17,3
2,7
3,8
4,4
6,4
7
9,8
10,8
14,4
17,5
3
4,8
5,7
7,2
8,5
11,2
13,3
15
17
20,3
2,9
4,3
5,1
7,5
9
12,4
15,1
1,6
2,7
2,9
5,2
5,1
7,8
8,9
12,5
15,2
2,7
4,4
5,2
6,6
7,9
10,5
12,7
14
16,3
19,7
6,7
9,9
12,6
3,6
5,4
6,5
10,1
12,8
2,3
3,9
4,7
5,9
7,2
9,7
11,8
13
15,6
18,8
1,8
3,3
4
5,2
6,4
8,6
10,8
11,9
14,5
17,7
3,8
4,6
5,6
7,3
8,8
11,2
13
16
17,8
20,5
* SHS4 version is not available.
1,3
2,7
3,3
4
5,4
7,3
9,5
10,3
13
16,3
3,6
4,3
5,3
7
8,5
10,7
12,4
15,5
17,3
20,2
2
2,7
3,1
4,4
5,8
8
11,4
14,8
3,3
4
5
6,7
8,2
10
11,8
15
16,8
19,6
4,2
5,3
7
8,5
9,7
3
3,7
4,7
6,3
7,8
9,3
11,2
14,3
16,2
19
3,9
5,1
6,3
8,2
9,5
10,6
13,2
16,6
2,7
3,3
4,3
5,8
7,5
8,6
10,3
13,8
15,4
18,4
3,7
4,8
6,1
8
9,2
10,2
12,8
16,3
19,5
23,2
1,9
2,6
3,6
5
6,5
6,8
8,7
12
13,8
16,7
3,2
4,4
5,7
7
8,5
9,3
12
15,6
18,8
22,7
7,6
9
10,4
2,3
4,8
5,5
13,5
2,5
3,6
4,9
5,9
7,3
7,9
10,6
14,2
17,7
21,4
7
8,5
9,8
12
15,4
19,5
22,2
26,1
4,6
8,4
7
10,1
14,2 12,2
18,6 16,8
she4-shs4-shf4-4p50-en_f_th
Performances accordin to ISO standards 9906 - Annex A.
27
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
28
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
29
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
30
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
31
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
32
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
33
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
34
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
35
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
36
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
37
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
38
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
39
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
40
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
41
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
42
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
43
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
44
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
45
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
46
SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
47
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
48
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
49
SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
50
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
51
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
52
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
53
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
54
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
55
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
56
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
57
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
58
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
59
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
60
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
61
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
62
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
63
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
64
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
65
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
66
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
67
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
68
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
69
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
70
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
71
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
72
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 50 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density ρ = 1,0 Kg/dm3 and kinematic viscosity ν = 1 mm2/sec.
73
74
DIMENSIONS
AND WEIGHTS
75
SHE SERIES
DIMENSIONS AND WEIGHTS A
T 50 Hz, 2 POLES
AT
76
SHE SERIES
DIMENSIONI E PESI SERIE SHE 2 poli 50 Hz
DIMENSIONS AND WEIGHTS A
T 50 Hz, 2 POLES
AT
DIMENSIONS (mm)
PUMP TYPE
WEIGHT
SUPPORT
PUMP
DNM DNA
SHE 25-125/07/D
SHE 25-125/11/D
SHE 25-160/15/D
SHE 25-160/22/C
SHE 25-200/30/P
SHE 25-200/40/P
SHE 25-250/55/P
SHE 25-250/75/P
SHE 25-250/110/P
SHE 32-125/07/D
SHE 32-125/11/D
SHE 32-160/15/D
SHE 32-160/22/C
SHE 32-200/30/P
SHE 32-200/40/P
SHE 32-250/55/P
SHE 32-250/75/P
SHE 32-250/110/P
SHE 40-125/11/D
SHE 40-125/15/D
SHE 40-125/22/C
SHE 40-160/30/P
SHE 40-160/40/P
SHE 40-200/55/P
SHE 40-200/75/P
SHE 40-250/92/P
SHE 40-250/110/P
SHE 40-250/150/P
SHE 50-125/22/C
SHE 50-125/30/P
SHE 50-125/40/P
SHE 50-160/55/P
SHE 50-160/75/P
SHE 50-200/92/P
SHE 50-200/110/P
SHE 50-250/150/P
SHE 50-250/185/P
SHE 50-250/220/P
SHE 65-160/40/P
SHE 65-160/55/P
SHE 65-160/75/P
SHE 65-160/92/P
SHE 65-160/110/P
SHE 65-200/150/P
SHE 65-200/185/P
SHE 65-200/220/P
SHE 80-160/110/P
SHE 80-160/150/P
SHE 80-160/185/P
SHE 80-200/220/P
25
25
25
25
25
25
25
25
25
32
32
32
32
32
32
32
32
32
40
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
80
80
80
80
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
100
100
100
100
a
h2
w
w1
x
b
c
*c1
h1
m
m1
n
n1
s
80
80
80
80
80
80
100
100
100
80
80
80
80
80
80
100
100
100
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
140
140
160
160
180
180
225
225
225
140
140
160
160
180
180
225
225
225
140
140
140
160
160
180
180
225
225
225
160
160
160
180
180
200
200
225
225
225
200
200
200
200
200
225
225
225
225
225
225
250
208
208
208
208
208
208
208
208
208
208
305
343
305
343
305
343
343
305
343
343
305
343
343
343
-
129
129
129
134
134
154
168
191
191
129
129
129
134
134
154
168
191
191
129
129
134
134
154
168
191
191
191
240
134
134
154
168
191
191
191
240
240
240
154
168
191
191
191
240
240
240
191
240
240
240
49
49
49
49
49
49
49
49
49
49
5
5
5
5
5
5
5
5
5
5
20
20
20
20
20
20
20
20
20
20
160
160
160
160
160
160
180
180
180
112
112
132
132
160
160
180
180
180
112
112
112
132
132
160
160
180
180
180
132
132
132
160
160
160
160
180
180
180
160
160
160
160
160
180
180
180
180
180
180
180
304
304
304
304
304
304
304
304
304
304
210
210
254
254
210
254
254
210
254
254
190
190
210
210
230
230
265
265
265
190
190
210
210
230
230
265
265
265
190
190
190
210
210
230
230
265
265
304
210
210
210
210
210
245
245
304
304
304
245
245
245
245
245
304
304
304
265
304
304
304
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
254
130
130
130
130
130
130
130
254
254
254
130
130
130
130
130
254
254
254
130
254
254
254
15
15
15
15
15
15
15
15
15
15
* Motor shim on request
B
H
218
218
253
253
284
284
345
345
345
218
218
253
253
284
284
345
345
345
218
218
218
253
253
284
284
345
345
345
253
253
253
253
253
310
310
345
345
345
310
310
310
310
310
310
310
310
345
345
345
345
300
300
320
320
340
340
405
405
405
252
252
292
292
340
340
405
405
405
252
252
252
292
292
340
340
405
405
420
292
292
292
340
340
360
360
420
420
420
360
360
360
360
360
420
420
420
405
420
420
430
L
k
443
443
443
478
478
499
553
567
605
443
443
443
478
478
499
553
567
605
443
443
478
478
499
553
567
605
605
694
498
498
519
553
567
605
605
694
694
694
519
553
567
605
605
694
694
694
630
719
719
719
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
100
100
100
100
100
100
100
107
107
107
104
104
104
104
104
104
104
107
107
107
130
130
130
130
130
130
130
130
160
160
160
160
max
kg
18,6
20,6
24,4
29
38
41
66
84
92
18,6
20,6
24,4
29
38
41
66
84
92
21,6
22,4
30
32
40
52
65
89
94
130
30
33
40
52
67
84
88
131
144
147
56
63
80
95
102
131
141
151
94
128
139
156
sh-she-2p50-en_e_td
77
SHE4 SERIES
DIMENSIONS AND WEIGHTS A
T 50 Hz, 4 POLES
AT
78
SHE4 SERIES
DIMENSIONI E PESI SERIE SHE4 4 poli 50 Hz
DIMENSIONS AND WEIGHTS A
T 50 Hz, 4 POLES
AT
DIMENSIONS (mm)
PUMP TYPE
WEIGHT
PUMP
DNM DNA
SHE4 25-125/02A/A
SHE4 25-125/02/A
SHE4 25-160/02/A
SHE4 25-160/03/A
SHE4 25-200/03/A
SHE4 25-200/05/A
SHE4 25-250/07/C
SHE4 25-250/11/P
SHE4 25-250/15/P
SHE4 32-125/02A/A
SHE4 32-125/02/A
SHE4 32-160/02/A
SHE4 32-160/03/A
SHE4 32-200/03/A
SHE4 32-200/05/A
SHE4 32-250/07/C
SHE4 32-250/11/P
SHE4 32-250/15/P
SHE4 40-125/02A/A
SHE4 40-125/02/A
SHE4 40-125/03/A
SHE4 40-160/03/A
SHE4 40-160/05/A
SHE4 40-200/07/C
SHE4 40-200/11/P
SHE4 40-250/11/P
SHE4 40-250/15/P
SHE4 40-250/22/P
SHE4 50-125/03A/A
SHE4 50-125/03/A
SHE4 50-125/05/A
SHE4 50-160/07/C
SHE4 50-160/11/P
SHE4 50-200/11/P
SHE4 50-200/15/P
SHE4 50-250/22A/P
SHE4 50-250/22/P
SHE4 50-250/30/P
SHE4 65-160/05/A
SHE4 65-160/07/C
SHE4 65-160/11A/P
SHE4 65-160/11/P
SHE4 65-160/15/P
SHE4 65-200/15/P
SHE4 65-200/22/P
SHE4 65-200/30/P
SHE4 65-250/40/P
SHE4 65-250/55/P
SHE4 80-160/15/P
SHE4 80-160/22A/P
SHE4 80-160/22/P
SHE4 80-200/30/P
SHE4 80-200/40/P
SHE4 80-250/55/P
SHE4 80-250/75/P
SHE4 80-250/110/P
25
25
25
25
25
25
25
25
25
32
32
32
32
32
32
32
32
32
40
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
a
80
80
80
80
80
80
100
100
100
80
80
80
80
80
80
100
100
100
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
125
125
h2
SUPPORT
w
140 140 160 160 180 180 225 225 225 140 140 160 160 180 180 225 225 225 140 140 140 160 160 180 180 225 225 225 160 160 160 180 180 200 200 225 225 225 200 200 200 200 200 225 225 225 250 250 225 225 225 250 250 280 280 280 208
w1
315
343
315
343
343
-
x
b
121 121 121 121 121 129 128 134 134 121 121 121 121 121 129 128 134 134 121 121 121 121 129 128 134 134 134 168 121 121 129 128 134 134 134 168 168 168 129 128 134 134 134 134 168 168 168 191 134 168 168 168 168 191 191 240 49
c
*c1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 40
* Motor shim on request
h1
m
m1
160 160 160 160 160 160 180 180 180 112 112 132 132 160 160 180 180 180 112 112 112 132 132 160 160 180 180 180 132 132 132 160 160 160 160 180 180 180 160 160 160 160 160 180 180 180 200 200 180 180 180 180 180 200 200 200 304 210
n
190
190
210
210
230
230
265
265
265
190
190
210
210
230
230
265
265
265
190
190
190
210
210
230
230
265
265
265
210
210
210
210
210
245
245
265
265
265
245
245
245
245
245
245
245
245
265
265
265
265
265
265
265
303
303
304
n1
B
H
218
218
253
253
284
284
345
345
345
218
218
253
253
284
284
345
345
345
218
218
218
253
253
285
285
345
345
345
253
253
253
253
253
310
310
345
345
345
310
310
310
310
310
310
310
310
345
345
345
345
345
345
345
383
383
383
300
300
320
320
340
340
405
405
405
252
252
292
292
340
340
405
405
405
252
252
252
292
292
340
340
405
405
405
292
292
292
340
340
360
360
405
405
405
360
360
360
360
360
405
405
405
450
450
405
405
405
430
430
480
480
480
s
130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 210 210 254 15
L
k
411
411
411
411
411
443
431
498
498
411
411
411
411
411
443
431
498
498
411
411
411
411
443
431
498
498
498
522
431
431
463
431
498
498
498
522
522
553
463
431
498
498
498
498
522
553
598
605
523
547
547
578
623
630
630
719
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
100
100
100
100
100
100
100
107
107
107
104
104
104
104
104
104
104
107
107
107
130
130
130
130
130
130
130
130
140
140
160
160
160
160
160
160
160
160
max
kg
15
16
18
19
26
27
42
49
51
15
16
18
19
26
27
42
49
51
16
17
18
20
24
27
35
47
61
65
20
20
26
30
40
48
51
56
56
62
32
36
44
45
48
56
64
64
84
97
55
63
66
69
88
102
106
145
sh-she4-4p50-en_e_td
79
SHS SERIES
DIMENSIONS AND WEIGHTS A
T 50 Hz, 2 POLES
AT
80
SHS SERIES
DIMENSIONI E PESI SERIE SHS 2 poli 50 Hz
DIMENSIONS AND WEIGHTS A
T 50 Hz, 2 POLES
AT
DIMENSIONS (mm)
PUMP TYPE
WEIGHT
SUPPORT
PUMP
DNM DNA
a
f
h2
B
n
n1
H
L
k
w
w1
x
b
c
*c1
h1
m
m1
s
max
SHS 25-125/07/D
25
50
80
155 140
-
-
129
-
-
-
160
-
-
190 130
-
218 300
498
98
24
kg
SHS 25-125/11/D
25
50
80
155 140
-
-
129
-
-
-
160
-
-
190 130
-
218 300
498
98
25
SHS 25-160/15/D
25
50
80
155 160
-
-
129
-
-
-
160
-
-
210 130
-
253 320
498
98
27
SHS 25-160/22/C
25
50
80
155 160
-
-
134
-
-
-
160
-
-
210 130
-
253 320
533
98
33
SHS 25-200/30/P
25
50
80
165 180
-
-
134
-
-
-
160
-
-
230 130
-
284 340
543
98
44
SHS 25-200/40/P
25
50
80
165 180
-
-
154
-
-
-
160
-
-
230 130
-
284 340
564
98
51
SHS 25-250/55/P
25
50 100 192 225
-
399 168
-
-
-
180
-
-
265 130
-
345 405
667
98
77
SHS 25-250/75/P
25
50 100 192 225
-
397 191
-
-
-
180
-
-
265 130
-
345 405
659
98
91
SHS 25-250/110/P
25
50 100 222 225 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
98
130
SHS 32-125/07/D
32
50
80
155 140
-
-
129
-
-
-
112
-
-
190 130
-
218 252
498
98
24
SHS 32-125/11/D
32
50
80
155 140
-
-
129
-
-
-
112
-
-
190 130
-
218 252
498
98
25
SHS 32-160/15/D
32
50
80
155 160
-
-
129
-
-
-
132
-
-
210 130
-
253 292
498
98
27
SHS 32-160/22/C
32
50
80
155 160
-
-
134
-
-
-
132
-
-
210 130
-
253 292
533
98
33
SHS 32-200/30/P
32
50
80
165 180
-
-
134
-
-
-
160
-
-
230 130
-
284 340
543
98
44
SHS 32-200/40/P
32
50
80
165 180
-
-
154
-
-
-
160
-
-
230 130
-
284 340
564
98
51
SHS 32-250/55/P
32
50 100 192 225
-
399 168
-
-
-
180
-
-
265 130
-
345 405
667
98
77
SHS 32-250/75/P
32
50 100 192 225
-
397 191
-
-
-
180
-
-
265 130
-
345 405
659
98
91
SHS 32-250/110/P
32
50 100 222 225 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
98
130
SHS 40-125/11/D
40
65
80
155 140
-
-
129
-
-
-
112
-
-
190 130
-
218 252
498
100
26
SHS 40-125/15/D
40
65
80
155 140
-
-
129
-
-
-
112
-
-
190 130
-
218 252
498
100
26
SHS 40-125/22/C
40
65
80
155 140
-
-
134
-
-
-
112
-
-
190 130
-
218 252
533
100
32
SHS 40-160/30/P
40
65
80
165 160
-
-
134
-
-
-
132
-
-
210 130
-
253 292
543
100
42
SHS 40-160/40/P
40
65
80
165 160
-
-
154
-
-
-
132
-
-
210 130
-
253 292
564
100
48
SHS 40-200/55/P
40
65 100 192 180
-
399 168
-
-
-
160
-
-
230 130
-
300 340
667
100
63
SHS 40-200/75/P
40
65 100 192 180
-
397 191
-
-
-
160
-
-
230 130
-
300 340
659
100
80
SHS 40-250/110A/P 40
65 100 222 225 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
107
129
SHS 40-250/110/P
40
65 100 222 225 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
107
129
SHS 40-250/150/P
40
65 100 222 225 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
107
142
SHS 50-125/22/C
50
65 100 155 160
-
-
134
-
-
-
132
-
-
210 130
-
253 292
553
104
36
SHS 50-125/30/P
50
65 100 165 160
-
-
134
-
-
-
132
-
-
210 130
-
253 292
563
104
37
SHS 50-125/40/P
50
65 100 165 160
-
-
154
-
-
-
132
-
-
210 130
-
253 292
584
104
48
SHS 50-160/55/P
50
65 100 192 180
-
399 168
-
-
-
160
-
-
210 130
-
300 340
667
104
62
SHS 50-160/75/P
50
65 100 192 180
-
397 191
-
-
-
160
-
-
210 130
-
300 340
659
104
81
SHS 50-200/110A/P 50
65 100 222 200 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
104
126
SHS 50-200/110/P
50
65 100 222 200 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
104
130
SHS 50-250/150/P
50
65 100 222 225 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
107
148
SHS 50-250/185/P
50
65 100 222 225 330
-
240 49 5 20 180 304 254 304 254 15 350 420
816
107
156
SHS 50-250/220/P
50
65 100 222 225 330
-
240 49 5 20 180 304 254 304 254 15 350 420
816
107
162
SHS 65-160/40/P
65
80 100 165 200
-
-
154
-
-
-
160
-
-
245 130
-
310 360
584
130
60
SHS 65-160/55/P
65
80 100 192 200
-
399 168
-
-
-
160
-
-
245 130
-
310 360
667
130
78
SHS 65-160/75/P
65
80 100 192 200
-
397 191
-
-
-
160
-
-
245 130
-
310 360
659
130
93
SHS 65-160/110A/P 65
80 100 222 200 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
130
116
SHS 65-160/110/P
65
80 100 222 200 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
130
120
SHS 65-200/150/P
65
80 100 222 225 330
-
240 49 5 20 180 304 210 304 254 15 350 420
816
130
147
SHS 65-200/185/P
65
80 100 222 225 330
-
240 49 5 20 180 304 254 304 254 15 350 420
816
130
153
SHS 65-200/220/P
65
80 100 222 225 330
-
240 49 5 20 180 304 254 304 254 15 350 420
816
130
167
SHS 65-250/300/C
65
80 100 228 250 361
-
317 82 30
-
200 370 305 385 318 18 402 517
985
140
290
SHS 65-250/370/C
65
80 100 228 250 361
-
317 82 30
-
200 370 305 385 318 18 402 517
985
140
322
SHS 80-160/110/P
80 100 125 222 225 330
-
240 49 5 20 180 304 210 304 254 15 350 420
841
160
116
SHS 80-160/150/P
80 100 125 222 225 330
-
240 49 5 20 180 304 210 304 254 15 350 420
841
160
152
SHS 80-160/185/P
80 100 125 222 225 330
-
240 49 5 20 180 304 254 304 254 15 350 420
841
160
160
SHS 80-200/220/P
80 100 125 222 250 330
-
240 49 5 20 180 304 254 304 254 15 350 430
841
160
162
SHS 80-200/300/C
80 100 125 228 250 361
-
317 82 30
-
200 370 305 385 318 18 402 517
985
160
312
SHS 80-200/370/C
80 100 125 228 250 361
-
317 82 30
-
200 370 305 385 318 18 402 517
985
160
317
* Motor shim on request
sh-shs-2p50-en_f_td
81
SHS4 SERIES
DIMENSIONS AND WEIGHTS A
T 50 Hz, 4 POLES
AT
82
SHS4 SERIES
DIMENSIONI E PESI SERIE SHS4 4 poli 50 Hz
DIMENSIONS AND WEIGHTS A
T 50 Hz, 4 POLES
AT
DIMENSIONS (mm)
PUMP TYPE
WEIGHT
PUMP
DNM DNA
SHS4 25-250/07/C
SHS4 25-250/11/P
SHS4 25-250/15/P
SHS4 32-250/07/C
SHS4 32-250/11/P
SHS4 32-250/15/P
SHS4 40-200/07/C
SHS4 40-200/11/P
SHS4 40-250/11/P
SHS4 40-250/15/P
SHS4 40-250/22/P
SHS4 50-160/07/C
SHS4 50-160/11/P
SHS4 50-200/11/P
SHS4 50-200/15/P
SHS4 50-250/22A/P
SHS4 50-250/22/P
SHS4 50-250/30/P
SHS4 65-160/05/A
SHS4 65-160/07/C
SHS4 65-160/11A/P
SHS4 65-160/11/P
SHS4 65-160/15/P
SHS4 65-200/15/P
SHS4 65-200/22/P
SHS4 65-200/30/P
SHS4 65-250/40/P
SHS4 65-250/55/P
SHS4 80-160/15/P
SHS4 80-160/22A/P
SHS4 80-160/22/P
SHS4 80-200/30/P
SHS4 80-200/40/P
SHS4 80-250/55/P
SHS4 80-250/75/P
SHS4 80-250/110/P
25
25
25
32
32
32
40
40
40
40
40
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
a
f
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
125
125
155
155
155
155
155
155
155
155
155
155
165
155
155
155
155
165
165
165
155
155
155
155
155
155
165
165
165
192
155
165
165
165
165
192
192
222
h2
SUPPORT
w
225 225 225 225 225 225 180 180 225 225 225 180 180 200 200 225 225 225 200 200 200 200 200 225 225 225 250 250 225 225 225 250 250 280 280 280 330
w1
x
b
380
435
380
435
435
-
128
134
134
128
134
134
128
134
134
134
168
128
134
134
134
168
168
168
129
128
134
134
134
134
168
168
168
191
134
168
168
168
168
191
191
240
49
* Motor shim on request
c
*c1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 40
h1
m
m1
180 180 180 180 180 180 160 160 180 180 180 160 160 160 160 180 180 180 160 160 160 160 160 180 180 180 200 200 180 180 180 180 180 200 200 200 304 210
n
n1
s
265
265
265
265
265
265
230
230
265
265
265
210
210
245
245
265
265
265
245
245
245
245
245
245
245
245
265
265
265
265
265
265
265
303
303
304
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
210
210
254
15
B
H
345
345
345
345
345
345
284
284
345
345
345
253
253
310
310
345
345
345
310
310
310
310
310
310
310
310
345
345
345
345
345
345
345
383
383
383
405
405
405
405
405
405
340
340
405
405
405
340
340
360
360
405
405
405
360
360
360
360
360
405
405
405
450
450
405
405
405
430
430
480
480
480
L
k
486
553
553
486
553
553
486
553
553
553
587
486
553
553
553
587
587
618
518
486
553
553
553
553
587
618
663
697
578
612
612
643
688
722
722
841
98
98
98
98
98
98
100
100
107
107
107
104
104
104
104
107
107
107
130
130
130
130
130
130
130
130
140
140
160
160
160
160
160
160
160
160
max
kg
42
49
50
42
49
50
31
37
51
64
68
30
36
49
52
58
59
65
34
38
46
48
51
54
71
72
97
104
59
67
67
72
88
107
113
153
sh-shs4-4p50-en_e_td
83
SHF BARE SHAF
T SERIES
SHAFT
DIMENSIONS AND WEIGHTS A
T 50 Hz
AT
84
SHF BARE SHAF
T SERIES
SHAFT
DIMENSIONI E PESI SERIE SHF
DIMENSIONS AND WEIGHTS A
T 50 Hz
AT
DIMENSIONS (mm)
PUMP TYPE
DNM DNA
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
25-125
25-160
25-200
25-250
32-125
32-160
32-200
32-250
40-125
40-160
40-200
40-250
50-125
50-160
50-200
50-250
65-160
65-200
65-250
80-160
80-200
80-250
25
25
25
25
32
32
32
32
40
40
40
40
50
50
50
50
65
65
65
80
80
80
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
80
80
80
100
100
100
WEIGHT
SUPPORT
PUMP
a
f
h1
h2
b
c
80
80
80
100
80
80
80
100
80
80
100
100
100
100
100
100
100
100
100
125
125
125
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
470
360
470
470
112
132
160
180
112
132
160
180
112
132
160
180
132
160
160
180
160
180
200
180
180
200
140
160
180
225
140
160
180
225
140
160
180
225
160
180
200
225
200
225
250
225
250
280
47
48
47
54
47
48
47
54
47
48
50
54
48
48
40
54
48
65
80
54
65
80
3
3
3
6
3
3
3
6
3
3
3
6
3
3
6
6
6
15
18
6
15
18
m
m1
n
B
SHAFT
n1
s
100 70 190 140 14
100 70 240 190 14
100 70 240 190 14
125 95 320 250 14
100 70 190 140 14
100 70 240 190 14
100 70 240 190 14
125 95 320 250 14
100 70 210 160 14
100 70 240 190 14
100 70 265 212 14
125 95 320 250 14
100 70 240 190 14
100 70 265 212 14
100 70 265 212 14
125 95 320 250 14
125 95 280 212 14
125 95 320 250 14
160 120 360 280 18
125 95 320 250 14
125 95 345 280 14
160 120 400 315 18
w
d
l
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260
340
260
340
340
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
32
24
32
32
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
80
50
80
80
t
k
u
kg
27 8 218 98
27 8 253 98
27 8 284 98
27 8 345 98
27 8 218 98
27 8 253 98
27 8 284 98
27 8 345 98
27 8 218 100
27 8 253 100
27 8 284 100
27 8 345 107
27 8 253 104
27 8 253 104
27 8 310 104
27 8 345 107
27 8 310 130
27 8 310 130
35 10 345 140
27 8 345 160
35 10 345 160
35 10 383 160
14
17
20
34
14
17
20
34
16
18
20
33
17
24
30
37
31
42
55
37
55
67
sh-shf-en_c_td
85
SHF BASE-MOUNTED SERIES
DIMENSIONS AND WEIGHTS A
T 50 Hz, 2 POLES
AT
86
SHF BASE-MOUNTED SERIES
DIMENSIONI E PESI SERIE SHF 2 poli 50 Hz
DIMENSIONS AND WEIGHTS A
T 50 Hz, 2 POLES
AT
DIMENSIONS (mm)
PUMP TYPE
s
WEIGHT COUPLING
FOR
DNM DNA
SHF 25-125/07/D
SHF 25-125/11/D
SHF 25-160/15/P
SHF 25-160/22/P
SHF 25-200/30/P
SHF 25-200/40/P
SHF 25-250/55/P
SHF 25-250/75/P
SHF 25-250/110/P
SHF 32-125/07/D
SHF 32-125/11/D
SHF 32-160/15/P
SHF 32-160/22/P
SHF 32-200/30/P
SHF 32-200/40/P
SHF 32-250/55/P
SHF 32-250/75/P
SHF 32-250/110/P
SHF 40-125/11/D
SHF 40-125/15/P
SHF 40-125/22/P
SHF 40-160/30/P
SHF 40-160/40/P
SHF 40-200/55/P
SHF 40-200/75/P
SHF 40-250/110A/P
SHF 40-250/110/P
SHF 40-250/150/P
SHF 50-125/22/P
SHF 50-125/30/P
SHF 50-125/40/P
SHF 50-160/55/P
SHF 50-160/75/P
SHF 50-200/110A/P
SHF 50-200/110/P
SHF 50-250/150/P
SHF 50-250/185/P
SHF 50-250/220/C
SHF 65-160/40/P
SHF 65-160/55/P
SHF 65-160/75/P
SHF 65-160/110A/P
SHF 65-160/110/P
SHF 65-200/150/P
SHF 65-200/185/P
SHF 65-200/220/C
SHF 65-250/300/C
SHF 65-250/370/C
SHF 80-160/110/P
SHF 80-160/150/P
SHF 80-160/185/P
SHF 80-200/220/C
SHF 80-200/300/C
SHF 80-200/370/C
SHF 80-250/450/C
SHF 80-250/550/C
SHF 80-250/750/C
25
25
25
25
25
25
25
25
25
32
32
32
32
32
32
32
32
32
40
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
100
a
B1
B2
L1
L2
L3
G
M
h1
h2
80
80
80
80
80
80
100
100
100
80
80
80
80
80
80
100
100
100
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
125
125
125
320
320
350
350
350
350
440
440
490
320
320
350
350
350
350
440
440
490
350
350
350
350
350
400
400
490
490
490
350
350
350
400
400
440
440
490
490
490
400
400
400
490
490
490
490
490
550
550
490
490
490
490
550
550
550
600
670
360
360
390
390
390
390
490
490
540
360
360
390
390
390
390
490
490
540
390
390
390
390
390
450
450
540
540
540
390
390
390
450
450
490
490
540
540
540
450
450
450
540
540
540
540
540
610
610
540
540
540
540
610
610
610
660
730
746
746
791
791
822
825
910
910
1067
746
746
791
791
822
825
910
910
1067
746
791
791
822
825
910
910
1067
1067
1067
811
842
845
910
910
1067
1067
1067
1067
1127
845
845
845
1067
1067
1067
1067
1127
1340
1340
1092
1092
1092
1262
1365
1365
1454
1563
1670
540
540
600
600
600
600
740
740
840
540
540
600
600
600
600
740
740
840
600
600
600
600
600
660
660
840
840
840
600
600
600
660
660
740
740
840
840
840
660
660
660
840
840
840
840
840
940
940
840
840
840
840
940
940
940
1060
1200
800
800
900
900
900
900
1120
1120
1250
800
800
900
900
900
900
1120
1120
1250
900
900
900
900
900
1000
1000
1250
1250
1250
900
900
900
1000
1000
1120
1120
1250
1250
1250
1000
1000
1000
1250
1250
1250
1250
1250
1400
1400
1250
1250
1250
1250
1400
1400
1400
1600
1800
130
130
150
150
150
150
190
190
205
130
130
150
150
150
150
190
190
205
150
150
150
150
150
170
170
205
205
205
150
150
150
170
170
190
190
205
205
205
170
170
170
205
205
205
205
205
230
230
205
205
205
205
230
230
230
270
300
60
60
60
60
60
60
75
75
75
60
60
60
60
60
60
75
75
75
60
60
60
60
60
60
60
75
75
75
60
60
60
60
60
60
60
75
75
75
75
75
75
75
75
75
75
75
90
90
75
75
75
75
75
75
90
90
90
212
212
232
232
260
260
280
280
280
212
212
232
232
260
260
280
280
280
212
212
212
232
232
260
260
280
280
280
232
232
232
260
260
260
260
280
280
280
260
260
260
260
260
280
280
280
310
310
280
280
280
280
310
310
365
390
420
140
140
160
160
180
180
225
225
225
140
140
160
160
180
180
225
225
225
140
140
140
160
160
180
180
225
225
225
160
160
160
180
180
200
200
225
225
225
200
200
200
200
200
225
225
225
250
250
225
225
225
250
250
250
280
280
280
Hmax SCREWS
352
352
392
392
440
440
505
505
520
352
352
392
392
440
440
505
505
520
352
352
352
392
400
451
451
520
520
520
392
392
400
451
451
500
500
520
520
559
460
460
460
500
500
520
520
559
627
627
520
520
520
559
627
627
749
792
892
M16
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M16
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M24
M20
M20
M20
M20
M24
M24
M24
M24
M24
TYPE
kg
67
69
73
75
95
97
130
134
181
67
69
73
75
95
97
130
134
181
70
74
77
92
96
123
128
167
170
175
84
92
95
120
122
145
150
165
170
246
133
150
154
162
162
185
190
274
367
403
198
209
220
302
373
402
501
582
700
A2
A2
A3
A3
B1
B1
C1
C1
C2
A2
A2
A3
A3
B1
B1
C1
C1
C2
A2
A3
A3
B1
B1
C1
C1
C2
C2
C2
A3
B1
B1
C1
C1
C2
C2
C2
C2
D1
B1
C1
C1
C2
C2
C2
C2
D1
E1
E1
C2
C2
C2
D2
E1
E1
E1
F1
G1
sh-shf-2p50-en_g_td
87
SHF4 BASE-MOUNTED SERIES
DIMENSIONS AND WEIGHTS A
T 50 Hz, 4 POLES
AT
88
SHF4 BASE-MOUNTED SERIES
DIMENSIONI E PESI SERIE SHF4 4 poli 50 Hz
DIMENSIONS AND WEIGHTS A
T 50 Hz, 4 POLES
AT
DIMENSIONS (mm)
PUMP TYPE
s
WEIGHT
FOR
DNM DNA
SHF4 25-125/02A/A
SHF4 25-125/02/A
SHF4 25-160/02/A
SHF4 25-160/03/A
SHF4 25-200/03/A
SHF4 25-200/05/A
SHF4 25-250/07/C
SHF4 25-250/11/P
SHF4 25-250/15/P
SHF4 32-125/02A/A
SHF4 32-125/02/A
SHF4 32-160/02/A
SHF4 32-160/03/A
SHF4 32-200/03/A
SHF4 32-200/05/A
SHF4 32-250/07/C
SHF4 32-250/11/P
SHF4 32-250/15/P
SHF4 40-125/02A/A
SHF4 40-125/02/A
SHF4 40-125/03/A
SHF4 40-160/03/A
SHF4 40-160/05/A
SHF4 40-200/07/C
SHF4 40-200/11/P
SHF4 40-250/11/P
SHF4 40-250/15/P
SHF4 40-250/22/P
SHF4 50-125/03A/A
SHF4 50-125/03/A
SHF4 50-125/05/A
SHF4 50-160/07/C
SHF4 50-160/11/P
SHF4 50-200/11/P
SHF4 50-200/15/P
SHF4 50-250/22A/P
SHF4 50-250/22/P
SHF4 50-250/30/P
SHF4 65-160/05/A
SHF4 65-160/07/C
SHF4 65-160/11A/P
SHF4 65-160/11/P
SHF4 65-160/15/P
SHF4 65-200/15/P
SHF4 65-200/22/P
SHF4 65-200/30/P
SHF4 65-250/40/P
SHF4 65-250/55/P
SHF4 80-160/15/P
SHF4 80-160/22A/P
SHF4 80-160/22/P
SHF4 80-200/30/P
SHF4 80-200/40/P
SHF4 80-250/55/P
SHF4 80-250/75/P
SHF4 80-250/110/P
25
25
25
25
25
25
25
25
25
32
32
32
32
32
32
32
32
32
40
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
a
B1
B2
L1
L2
L3
G
M
h1
h2
80
80
80
80
80
80
100
100
100
80
80
80
80
80
80
100
100
100
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
125
125
320
320
320
320
320
320
400
400
400
320
320
320
320
320
320
400
400
400
320
320
320
320
320
350
350
400
400
400
320
320
320
350
350
350
350
400
400
400
350
350
400
400
400
400
440
440
440
440
400
440
440
440
440
490
490
490
360
360
360
360
360
360
450
450
450
360
360
360
360
360
360
450
450
450
360
360
360
360
360
390
390
450
450
450
360
360
360
390
390
390
390
450
450
450
390
390
450
450
450
450
490
490
490
490
450
490
490
490
490
540
540
540
704
704
704
704
704
746
734
811
811
704
704
704
704
704
746
734
811
811
704
704
704
704
746
734
811
811
811
888
724
724
766
734
811
811
811
888
888
888
766
734
811
811
811
811
888
888
1031
1058
836
913
913
1023
1056
1083
1083
1202
540
540
540
540
540
540
660
660
660
540
540
540
540
540
540
660
660
660
540
540
540
540
540
600
600
660
660
660
540
540
540
600
600
600
600
660
660
660
600
600
600
660
660
660
740
740
740
740
660
740
740
740
740
840
840
840
800
800
800
800
800
800
1000
1000
1000
800
800
800
800
800
800
1000
1000
1000
800
800
800
800
800
900
900
1000
1000
1000
800
800
800
900
900
900
900
1000
1000
1000
900
900
1000
1000
1000
1000
1120
1120
1120
1120
1000
1120
1120
1120
1120
1250
1250
1250
130
130
130
130
130
130
170
170
170
130
130
130
130
130
130
170
170
170
130
130
130
130
130
150
150
170
170
170
130
130
130
150
150
150
150
170
170
170
150
150
170
170
170
170
190
190
190
190
170
190
190
190
190
205
205
205
60
60
60
60
60
60
75
75
75
60
60
60
60
60
60
75
75
75
60
60
60
60
60
60
60
75
75
75
60
60
60
60
60
60
60
75
75
75
75
75
75
75
75
75
75
75
90
90
75
75
75
75
75
90
90
90
212
212
232
232
260
260
280
280
280
212
212
232
232
260
260
280
280
280
212
212
212
232
232
260
260
280
280
280
232
232
232
260
260
260
260
280
280
280
260
260
260
260
260
280
280
280
310
310
280
280
280
280
280
310
310
310
140
140
160
160
180
180
225
225
225
140
140
160
160
180
180
225
225
225
140
140
140
160
160
180
180
225
225
225
160
160
160
180
180
200
200
225
225
225
200
200
200
200
200
225
225
225
250
250
225
225
225
250
250
280
280
280
Hmax SCREWS
352
352
392
392
440
440
505
505
505
352
352
392
392
440
440
505
505
505
352
352
352
392
392
440
440
505
505
505
392
392
392
440
440
460
460
505
505
505
460
460
460
460
460
505
505
505
550
550
505
505
505
530
530
590
590
590
M16
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
COUPLING
TYPE
kg
72
72
74
74
78
80
98
106
108
72
72
74
74
78
80
98
106
108
57
57
58
60
62
70
78
105
108
131
59
59
61
69
77
88
91
132
132
136
84
86
94
94
97
109
133
137
178
193
127
143
143
162
171
194
198
256
A1
A1
A1
A1
A1
A2
A2
A3
A3
A1
A1
A1
A1
A1
A2
A2
A3
A3
A1
A1
A1
A1
A2
A2
A3
A3
A3
B1
A1
A1
A2
A2
A3
A3
A3
B1
B1
B1
A2
A2
A3
A3
A3
A3
B1
B1
C3
C4
A3
B1
B1
C3
C3
C4
C4
C5
sh-shf4-4p50-en_f_td
89
SHF SC SERIES MOUNTED ON BASE
DIMENSIONS AND WEIGHTS A
T 50 Hz, 2 POLES
AT
90
a
B1
B2
L1
L2
L3
G
M
h1
h2
Hmax
f
x
SCREWS
kg
COUPLING
TYPE
SHF SC SERIES MOUNTED ON BASE
DIMENSIONI E PESI SERIE SHF SC 2 poli 50 Hz
DIMENSIONS AND WEIGHTS A
T 50 Hz, 2 POLES
AT
80
80
80
80
80
80
100
100
100
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
125
125
125
320
320
350
350
350
350
440
440
490
350
350
350
350
350
400
400
490
490
490
350
350
350
400
400
440
440
490
490
490
400
400
400
490
490
490
490
490
550
550
490
490
490
490
550
550
550
600
670
360
360
390
390
390
390
490
490
540
390
390
390
390
390
450
450
540
540
540
390
390
390
450
450
490
490
540
540
540
450
450
450
540
540
540
540
540
610
610
540
540
540
540
610
610
610
660
730
845
845
889
889
920
923
1007
1007
1164
845
889
889
920
923
1007
1007
1164
1164
1164
909
940
943
1007
1007
1164
1164
1164
1164
1224
943
1007
1007
1164
1164
1164
1164
1224
1477
1477
1189
1189
1189
1359
1502
1502
1591
1700
1807
540
540
600
600
600
600
740
740
840
600
600
600
600
600
660
660
840
840
840
600
600
600
660
660
740
740
840
840
840
660
660
660
840
840
840
840
840
940
940
840
840
840
840
940
940
940
1060
1200
800
800
900
900
900
900
1120
1120
1250
900
900
900
900
900
1000
1000
1250
1250
1250
900
900
900
1000
1000
1120
1120
1250
1250
1250
1000
1000
1000
1250
1250
1250
1250
1250
1400
1400
1250
1250
1250
1250
1400
1400
1400
1600
1800
130
130
150
150
150
150
190
190
205
150
150
150
150
150
170
170
205
205
205
150
150
150
170
170
190
190
205
205
205
170
170
170
205
205
205
205
205
230
230
205
205
205
205
230
230
230
270
300
60
60
60
60
60
60
75
75
75
60
60
60
60
60
60
60
75
75
75
60
60
60
60
60
60
60
75
75
75
75
75
75
75
75
75
75
75
90
90
75
75
75
75
75
75
90
90
90
212
212
232
232
260
260
280
280
280
212
212
212
232
232
260
260
280
280
280
232
232
232
260
260
260
260
280
280
280
260
260
260
260
260
280
280
280
310
310
280
280
280
280
310
310
365
390
420
140
140
160
160
180
180
225
225
225
140
140
140
160
160
180
180
225
225
225
160
160
160
180
180
200
200
225
225
225
200
200
200
200
200
225
225
225
250
250
225
225
225
250
250
250
280
280
280
352
352
392
392
440
440
505
505
520
352
352
352
392
400
451
451
520
520
520
392
392
400
451
451
500
500
520
520
559
460
460
460
500
500
520
520
559
627
627
520
520
520
559
627
627
749
792
892
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
470
470
360
360
360
470
470
470
470
470
470
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
140
140
100
100
100
100
140
140
140
140
140
M16
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M16
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M24
M20
M20
M20
M20
M24
M24
M24
M24
M24
69
71
75
77
97
99
132
136
183
72
76
79
94
98
125
130
169
172
177
86
94
97
122
124
147
152
167
172
248
135
152
156
164
164
187
192
276
370
406
200
211
222
304
376
405
504
587
706
A2S
A2S
A3S
A3S
B1S
B1S
C1S
C1S
C2S
A2S
A3S
A3S
B1S
B1S
C1S
C1S
C2S
C2S
C2S
A3S
B1S
B1S
C1S
C1S
C2S
C2S
C2S
C2S
D1S
B1S
C1S
C1S
C2S
C2S
C2S
C2S
D1S
E1S
E1S
C2S
C2S
C2S
D2S
E1S
E1S
E1S
F1S
G1S
DIMENSIONS (mm)
PUMP TYPE
s
WEIGHT
FOR
DNM DNA
SHF 32-125/07/D SC
SHF 32-125/11/D SC
SHF 32-160/15/P SC
SHF 32-160/22/P SC
SHF 32-200/30/P SC
SHF 32-200/40/P SC
SHF 32-250/55/P SC
SHF 32-250/75/P SC
SHF 32-250/110/P SC
SHF 40-125/11/D SC
SHF 40-125/15/P SC
SHF 40-125/22/P SC
SHF 40-160/30/P SC
SHF 40-160/40/P SC
SHF 40-200/55/P SC
SHF 40-200/75/P SC
SHF 40-250/110A/P SC
SHF 40-250/110/P SC
SHF 40-250/150/P SC
SHF 50-125/22/P SC
SHF 50-125/30/P SC
SHF 50-125/40/P SC
SHF 50-160/55/P SC
SHF 50-160/75/P SC
SHF 50-200/110A/P SC
SHF 50-200/110/P SC
SHF 50-250/150/P SC
SHF 50-250/185/P SC
SHF 50-250/220/C SC
SHF 65-160/40/P SC
SHF 65-160/55/P SC
SHF 65-160/75/P SC
SHF 65-160/110A/P SC
SHF 65-160/110/P SC
SHF 65-200/150/P SC
SHF 65-200/185/P SC
SHF 65-200/220/C SC
SHF 65-250/300/C SC
SHF 65-250/370/C SC
SHF 80-160/110/P SC
SHF 80-160/150/P SC
SHF 80-160/185/P SC
SHF 80-200/220/C SC
SHF 80-200/300/C SC
SHF 80-200/370/C SC
SHF 80-250/450/C SC
SHF 80-250/550/C SC
SHF 80-250/750/C SC
32
32
32
32
32
32
32
32
32
40
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
100
sh-shf-sc-2p50-en_e_td
91
92
ACCESSORIES
93
DIMENSIONS OF ROUND THREADED COUNTERFLANGES
ACCORDING TO EN 1092-1
DIMENSIONI CONTROFLANGE TONDE
DIMENSIONS (mm)
HOLES
DN
øC
øA
B
øD
H
øF
N°
PN
25
Rp 1
85
10
115
16
14
4
16
32
Rp 1¼
100
13
140
16
18
4
16
40
Rp 1½
110
14
150
19
18
4
16
50
Rp 2
125
16
165
24
18
4
16
65
Rp 2½
145
16
185
23
18
4
16
80
Rp 3
160
17
200
27
18
8
16
100
Rp 4
180
18
220
31
18
8
16
sh-ctf-tonde-f-en_b_td
DIMENSIONS OF ROUND WELD
-ON COUNTERFLANGES
WELD-ON
ACCORDING TO EN 1092-1
DIMENSIONI CONTROFLANGE TONDE
DIMENSIONS (mm)
HOLES
DN
øC
øA
B
øD
øF
N°
PN
65
77
145
18
185
18
4
16
80
90
160
20
200
18
8
16
100
115,5
180
22
220
18
8
16
sh-ctf-tonde-s-en_b_td
AISI 304 FLANGE WITH PRES
SURE GA
UGE CONNECTOR
PRESSURE
GAUGE
FLANGIA CON ATTACCO G 1/2"
DESIGNATION
25
32
40
50
65
80
100
DIMENSIONS (mm)
d
D
29
36
44
54
69
85
105
70
82
92
107
127
142
162
fh-fla-manom-en_a_td
94
FLEXIBLE COUPLING DIMENSIONS
SHF DIMENSIONI GIUNTO ELASTICO
REF.
SIZE x d1 x d2
A1
A2
A3
B1
C1
C2
C3
C4
C5
D1
D2
E1
F1
G1
DIMENSIONS (mm)
DENOMINATION
B 68 x 24 x 14
B 68 x 24 x 19
B 68 x 24 x 24
B 80 x 24 x 28
B 95 x 24 x 38
B 95 x 24 x 42
B 95 x 32 x 28
B 95 x 32 x 38
B 95 x 32 x 42
B 110 x 24 x 48
B 110 x 32 x 48
B 125 x 32 x 55
B 140 x 32 x 60
B 160 x 32 x 65
d1
H7
24
24
24
24
24
24
32
32
32
24
32
32
32
32
K1
K4
PUMP-SIDE HALF COUPLING
MOTOR-SIDE HALF COUPLING
l1
20
20
20
30
35
35
35
35
35
40
40
50
55
60
b1
js9
8
8
8
8
8
8
10
10
10
8
10
10
10
10
t1 0
+0.2
27,3
27,3
27,3
27,3
27,3
27,3
35,3
35,3
35,3
27,3
35,3
35,3
35,3
35,3
s1
q1
u
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M10
10
10
10
19
20
20
20
20
20
22
22
30
13
13
2÷4
2÷4
2÷4
2÷4
2÷4
2÷4
2÷4
2÷4
2÷4
2÷4
2÷4
2÷4
2÷4
2÷6
d2
H7
14
19
24
28
38
42
28
38
42
48
48
55
60
65
l2
20
20
20
30
35
35
35
35
35
40
40
50
55
60
b2
js9
5
6
8
8
10
12
8
10
12
14
14
16
18
18
t2 0
+0.2
16,3
21,8
27,3
31,3
41,3
45,3
31,3
41,3
45,3
51,8
51,8
59,3
64,4
69,4
s2
q2
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M10
8
8
8
12
15
15
15
15
15
18
18
20
22
25
shf-giunto-elastico-en_c_td
95
SP
ACER COUPLING DIMENSIONS
SPACER
DIMENSIONI GIUNTO ELASTICO CON SPAZIATORE
REF.
SIXE x l x d1 x d2
A2S
A3S
B1S
C1S
C2S
D1S
D2S
E1S
F1S
G1S
DIMENSIONS (mm)
DENOMINATION
H 80-100 x 24 x 19
H 80-100 x 24 x 24
H 80-100 x 24 x 28
H 95-100 x 24 x 38
H 95-100 x 24 x 42
H 110-100 x 24 x 48
H 110-100 x 32 x 48
H 125-140 x 32 x 55
H 140-140 x 32 x 60
H 160-140 x 32 x 65
l0
+1
100
100
100
100
100
100
100
140
140
140
d1
K1
K5
PUMP-SIDE HALF COUPLING
MOTOR-SIDE HALF COUPLING
H7
24
24
24
24
24
24
32
32
32
32
l1
30
30
30
35
35
40
40
50
55
60
b1
js9
8
8
8
8
8
8
10
10
10
10
t1 0
+0.2
s1
27,3 M6
27,3 M6
27,3 M6
27,3 M6
27,3 M6
27,3 M6
35,3 M6
35,3 M8
35,3 M8
35,3 M10
H7
q1
u
d2
19
19
19
20
20
22
22
30
13
13
5
5
5
5
5
5
5
5
5
6
19
24
28
38
42
48
48
55
60
65
l2
45
45
45
45
45
50
50
50
65
70
b2
js9
6
8
8
10
12
14
14
16
18
18
t2 0
+0.2
s2
21,8 M6
27,3 M6
31,3 M6
41,3 M6
45,3 M6
51,8 M6
51,8 M6
59,3 M8
64,4 M8
69,4 M10
q2
15
15
15
20
20
25
25
25
30
35
sh-giunto-elastico-con-sp-en_c_td
96
MOTOR SHIM FOR SH VERSIONS
DIMENSIONI SPESSORI PIATTI PER MOTORI SHF
DIMENSIONS (mm)
DENOMINATION
b
x
35
35
40
40
40
40
40
40
40
50
50
50
50
80
90
h
12
20
8
10
12
12
20
30
40
8
20
20
30
30
30
x
HOLES
l
125
125
180
155
155
180
180
155
180
226
226
304
304
360
406
a
l1
l2
c
N°
øs
17
17
17
20
20
17
17
20
17
21
21
25
25
26,5
30
100
100
140
100
100
140
140
100
140
140
140
210
210
-
125
125
125
178
178
254
254
311
349
12,5
12,5
20
15
15
20
20
15
20
24
24
25
25
24,5
28,5
2
2
2
3
3
2
2
3
2
3
3
3
3
2
2
10
10
14
10
10
14
14
10
14
14
14
16
16
18
22
sp-piatti-mot-shf-en_c_td
CYLINDRICAL MOTOR
SHIM (SHF)
DIMENSIONI SPESSORI
DIMENSIONS (mm)
DESIGNATION
d1
x
h
45
45
45
55
55
55
55
55
65
65
65
65
65
41
61
89
52
70
80
90
100
60
68
78
80
88
PUMP
SHIM (SHF)
DIMENSIONI SPESSORI POMPA SHF
DIMENSIONS (mm)
DESIGNATION
b x h x m1
d2
10
10
10
12
12
12
12
12
16
16
16
16
16
40
40
40
40
70
80
80
80
10
20
25
30
20
10
25
30
160
160
160
160
125
160
160
160
a
m2
øs
t
25
25
25
25
15
20
20
20
110
110
110
110
95
120
120
120
14
14
14
14
14
18
18
18
16,5
16,5
16,5
16,5
37,5
42,5
42,5
42,5
sp-pompa-shf-en_b_td
sp-tondi-mot-shf-en_b_td
97
98
TECHNICAL
APPENDIX
99
TYPICAL APPLICA
TIONS OF SH SERIES ELECTRIC PUMPS
APPLICATIONS
Water Purification:
De-ionized water
Water Treatment
Filtration
Commercial Pools
Waste Management:
Waste treatment
Pollution control
Food and Drink:
Food processing
Bottle washing
Citrus Processing
Dish washing
Brewing
Sanitary ware
Machine Tools:
Degreasing
Parts washing
Machine centres
Chemical treatment
Heat treatment
Medical:
Laser cooling
Medical chillers
Sanitary equipment
Vehicle Maintenance:
Car washing
Lorry of Truck wash
Wheel or tyre washing
Airplane washing
Heating, Ventilating &
Air Conditioning (HVAC)
Condensate return
Air scrubbers
Water re-circulation
Cooling towers
Cooling systems
Temperature control
Chillaer
Induction heating
Heat exchangers
Water heating
Booster packages
Marine:
Water on board ships
Boat design (wave machines)
Agriculture:
Irrigation
Greenhouses
Poultry Washing
Cotton humidifiers
Computers:
Washing of circuit boards
Graphics:
Film washing
Cooling of presses
Laundry:
Commercial washing
Plastics:
Extrusion machines
Temperature control
Manufacture of polymers
General Industry:
Spray Booths
Light chemical transfer
Booster systems
Fire fighting
TECHNICAL APPENDIX
100
NPSH
The minimum operating values that can be reached at the
pump suction end are limited by the onset of cavitation.
Cavitation is the formation of vapour-filled cavities within
liquids where the pressure is locally reduced to a critical value,
or where the local pressure is equal to, or just below the
vapour pressure of the liquid.
The vapour-filled cavities flow with the current and
when they reach a higher pressure area the vapour
contained in the cavities condenses. The cavities collide,
generating pressure waves that are transmitted to the
walls. These, being subjected to stress cycles, gradually
become deformed and yield due to fatigue. This
phenomenon, characterized by a metallic noise
produced by the hammering on the pipe walls, is called
incipient cavitation.
The damage caused by cavitation may be magnified by
electrochemical corrosion and a local rise in
temperature due to the plastic deformation of the
walls. The materials that offer the highest resistance to
heat and corrosion are alloy steels, especially austenitic
steel. The conditions that trigger cavitation may be
assessed by calculating the total net suction head,
referred to in technical literature with the acronym
NPSH (Net Positive Suction Head).
The NPSH represents the total energy (expressed in m.)
of the liquid measured at suction under conditions of
incipient cavitation, excluding the vapour pressure
(expressed in m.) that the liquid has at the pump inlet.
To find the static height hz at which to install the
machine under safe conditions, the following formula
must be verified:
hp + hz ≥ (NPSHr + 0.5) + hf + hpv
1
where:
hp is the absolute pressure applied to the free liquid
surface in the suction tank, expressed in m. of
liquid; hp is the quotient between the barometric
pressure and the specific weight of the liquid.
hz is the suction lift between the pump axis and the
free liquid surface in the suction tank, expressed
in m.; hz is negative when the liquid level is
lower than the pump axis.
hf is the flow resistance in the suction line and its
accessories, such as: fittings, foot valve, gate
valve, elbows, etc.
hpv is the vapour pressure of the liquid at the
operating temperature, expressed in m. of
liquid. hpv is the quotient between the Pv vapour
pressure and the liquid’s specific weight.
0,5 is the safety factor.
The maximum possible suction head for installation
depends on the value of the atmospheric pressure
(i.e. the elevation above sea level at which the pump
is installed) and the temperature of the liquid.
To help the user, with reference to water temperature
(4° C) and to the elevation above sea level, the
following tables show the drop in hydraulic pressure
head in relation to the elevation above sea level, and
the suction loss in relation to temperature.
Water
temperature (°C) 20
Suction
loss (m)
40
0,2 0,7
60 80
90
110
120
2,0 5,0 7,4 15,4 21,5
Elevation above
sea level (m)
500 1000 1500 2000
2500 3000
Suction
loss (m)
2,75
0,55
1,1
1,65
2,2
3,3
Friction loss is shown in the tables at pages 103-104 of
this catalogue. To reduce it to a minimum, especially
in cases of high suction head (over 4-5 m.) or within
the operating limits with high flow rates, we
recommend using a suction line having a larger
diameter than that of the pump’s suction port.
It is always a good idea to position the pump as close
as possible to the liquid to be pumped.
Make the following calculation:
Liquid: water at ~15°C γ = 1 kg/dm3
Flow rate required: 30 m3/h
Head for required delivery: 43 m.
Suction lift: 3,5 m.
The selection is an FHE 40-200/75 pump whose NPSH
required value is, at 30 m3/h, di 2,5 m.
For water at 15 °C
hp = Pa / γ = 10,33m, hpv = Pv / γ = 0,174m (0,01701 bar)
The Hf flow resistance in the suction line with foot
valves is ~ 1,2 m.
By substituting the parameters in formula 1 with the
numeric values above, we have:
10,33 + (-3,5) ≥ (2,5 + 0,5) + 1,2 + 0,17
from which we have: 6,8 > 4,4
The relation is therefore verified.
101
TECHNICAL APPENDIX
TECHNICAL APPENDIX VAPOUR PRESSURE PS VAPOUR
PRESSURE AND ρ DENSITY OF WATER TABLE
t
T
ps
ρ
t
T
ps
ρ
t
T
ps
ρ
°C
K
bar
°C
K
bar
K
bar
273,15
274,15
275,15
276,15
277,15
278,15
279,15
280,15
281,15
282,15
283,15
284,15
285,15
286,15
287,15
288,15
289,15
290,15
291,15
292,15
293,15
294,15
295,15
296,15
297,15
298,15
299,15
300,15
301,15
302,15
303,15
304,15
305,15
306,15
307,15
308,15
309,15
310,15
311,15
312,15
313,15
314,15
315,15
316,15
317,15
318,15
319,15
320,15
321,15
322,15
323,15
324,15
325,15
326,15
327,15
0,00611
0,00657
0,00706
0,00758
0,00813
0,00872
0,00935
0,01001
0,01072
0,01147
0,01227
0,01312
0,01401
0,01497
0,01597
0,01704
0,01817
0,01936
0,02062
0,02196
0,02337
0,24850
0,02642
0,02808
0,02982
0,03166
0,03360
0,03564
0,03778
0,04004
0,04241
0,04491
0,04753
0,05029
0,05318
0,05622
0,05940
0,06274
0,06624
0,06991
0,07375
0,07777
0,08198
0,09639
0,09100
0,09582
0,10086
0,10612
0,11162
0,11736
0,12335
0,12961
0,13613
0,14293
0,15002
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
102
104
106
108
110
112
114
116
118
328,15
329,15
330,15
331,15
332,15
333,15
334,15
335,15
336,15
337,15
338,15
339,15
340,15
341,15
342,15
343,15
344,15
345,15
346,15
347,15
348,15
349,15
350,15
351,15
352,15
353,15
354,15
355,15
356,15
357,15
358,15
359,15
360,15
361,15
362,15
363,15
364,15
365,15
366,15
367,15
368,15
369,15
370,15
371,15
372,15
373,15
375,15
377,15
379,15
381,15
383,15
385,15
387,15
389,15
391,15
0,15741
0,16511
0,17313
0,18147
0,19016
0,1992
0,2086
0,2184
0,2286
0,2391
0,2501
0,2615
0,2733
0,2856
0,2984
0,3116
0,3253
0,3396
0,3543
0,3696
0,3855
0,4019
0,4189
0,4365
0,4547
0,4736
0,4931
0,5133
0,5342
0,5557
0,5780
0,6011
0,6249
0,6495
0,6749
0,7011
0,7281
0,7561
0,7849
0,8146
0,8453
0,8769
0,9094
0,9430
0,9776
1,0133
1,0878
1,1668
1,2504
1,3390
1,4327
1,5316
1,6362
1,7465
1,8628
kg/dm3
0,9857
0,9852
0,9846
0,9842
0,9837
0,9832
0,9826
0,9821
0,9816
0,9811
0,9805
0,9799
0,9793
0,9788
0,9782
0,9777
0,9770
0,9765
0,9760
0,9753
0,9748
0,9741
0,9735
0,9729
0,9723
0,9716
0,9710
0,9704
0,9697
0,9691
0,9684
0,9678
0,9671
0,9665
0,9658
0,9652
0,9644
0,9638
0,9630
0,9624
0,9616
0,9610
0,9602
0,9596
0,9586
0,9581
0,9567
0,9552
0,9537
0,9522
0,9507
0,9491
0,9476
0,9460
0,9445
°C
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
kg/dm3
0,9998
0,9999
0,9999
0,9999
1,0000
1,0000
1,0000
0,9999
0,9999
0,9998
0,9997
0,9997
0,9996
0,9994
0,9993
0,9992
0,9990
0,9988
0,9987
0,9985
0,9983
0,9981
0,9978
0,9976
0,9974
0,9971
0,9968
0,9966
0,9963
0,9960
0,9957
0,9954
0,9951
0,9947
0,9944
0,9940
0,9937
0,9933
0,9930
0,9927
0,9923
0,9919
0,9915
0,9911
0,9907
0,9902
0,9898
0,9894
0,9889
0,9884
0,9880
0,9876
0,9871
0,9862
0,9862
120
122
124
126
128
130
132
134
136
138
140
145
155
160
165
170
175
180
185
190
195
200
205
210
215
220
225
230
235
240
245
250
255
260
265
270
275
280
285
290
295
300
305
310
315
320
325
330
340
350
360
370
374,15
393,15
395,15
397,15
399,15
401,15
403,15
405,15
407,15
409,15
411,15
413,15
418,15
428,15
433,15
438,15
433,15
448,15
453,15
458,15
463,15
468,15
473,15
478,15
483,15
488,15
493,15
498,15
503,15
508,15
513,15
518,15
523,15
528,15
533,15
538,15
543,15
548,15
553,15
558,15
563,15
568,15
573,15
578,15
583,15
588,15
593,15
598,15
603,15
613,15
623,15
633,15
643,15
647,30
1,9854
2,1145
2,2504
2,3933
2,5435
2,7013
2,867
3,041
3,223
3,414
3,614
4,155
5,433
6,181
7,008
7,920
8,924
10,027
11,233
12,551
13,987
15,550
17,243
19,077
21,060
23,198
25,501
27,976
30,632
33,478
36,523
39,776
43,246
46,943
50,877
55,058
59,496
64,202
69,186
74,461
80,037
85,927
92,144
98,70
105,61
112,89
120,56
128,63
146,05
165,35
186,75
210,54
221,20
kg/dm3
0,9429
0,9412
0,9396
0,9379
0,9362
0,9346
0,9328
0,9311
0,9294
0,9276
0,9258
0,9214
0,9121
0,9073
0,9024
0,8973
0,8921
0,8869
0,8815
0,8760
0,8704
0,8647
0,8588
0,8528
0,8467
0,8403
0,8339
0,8273
0,8205
0,8136
0,8065
0,7992
0,7916
0,7839
0,7759
0,7678
0,7593
0,7505
0,7415
0,7321
0,7223
0,7122
0,7017
0,6906
0,6791
0,6669
0,6541
0,6404
0,6102
0,5743
0,5275
0,4518
0,3154
G-at_npsh_a_sc
TECHNICAL APPENDIX
102
TABLE OF FLOW RESISTANCE IN 100 m OF STRAIGHT CAST
IRON PIPELINE (HAZEN-WILLIAMS FORMULA C=100)
FLOW RATE
m3/h
l/min
0,6
10
0,9
15
1,2
20
1,5
25
1,8
30
2,1
35
2,4
40
3
50
3,6
60
4,2
70
4,8
80
5,4
90
6
100
7,5
125
9
150
10,5
175
12
200
15
250
18
300
24
400
30
500
36
600
42
700
48
800
54
900
60
1000
75
1250
90
1500
105
1750
120
2000
150
2500
180
3000
210
3500
240
4000
300
5000
360
6000
420
7000
480
8000
540
9000
600
10000
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
15
1/2"
20
3/4"
25
1"
32
1 1/4"
40
1 1/2"
0,94
16
1,42
33,9
1,89
57,7
2,36
87,2
2,83
122
3,30
162
0,53
3,94
0,80
8,35
1,06
14,21
1,33
21,5
1,59
30,1
1,86
40,0
2,12
51,2
2,65
77,4
3,18
108
3,72
144
4,25
185
0,34
1,33
0,51
2,82
0,68
4,79
0,85
7,24
1,02
10,1
1,19
13,5
1,36
17,3
1,70
26,1
2,04
36,6
2,38
48,7
2,72
62,3
3,06
77,5
3,40
94,1
4,25
142
0,21
0,40
0,31
0,85
0,41
1,44
0,52
2,18
0,62
3,05
0,73
4,06
0,83
5,19
1,04
7,85
1,24
11,0
1,45
14,6
1,66
18,7
1,87
23,3
2,07
28,3
2,59
42,8
3,11
59,9
3,63
79,7
4,15
102
5,18
154
0,13
0,13
0,20
0,29
0,27
0,49
0,33
0,73
0,40
1,03
0,46
1,37
0,53
1,75
0,66
2,65
0,80
3,71
0,93
4,93
1,06
6,32
1,19
7,85
1,33
9,54
1,66
14,4
1,99
20,2
2,32
26,9
2,65
34,4
3,32
52,0
3,98
72,8
5,31
124
6,63
187
50
2
0,17
0,16
0,21
0,25
0,25
0,35
0,30
0,46
0,34
0,59
0,42
0,89
0,51
1,25
0,59
1,66
0,68
2,13
0,76
2,65
0,85
3,22
1,06
4,86
1,27
6,82
1,49
9,07
1,70
11,6
2,12
17,5
2,55
24,6
3,40
41,8
4,25
63,2
5,10
88,6
5,94
118
6,79
151
7,64
188
NOMINAL DIAMETER in mm and INCHES
65
80
100
125 150
175
2 1/2"
3"
4"
5"
6"
7"
200
8"
250
10"
300
12"
350
14"
400
16"
0,53
0,27
0,66
0,40
0,80
0,56
0,93
0,75
1,06
0,96
1,33
1,45
1,59
2,03
1,86
2,71
2,12
3,46
2,65
5,23
3,18
7,33
3,72
9,75
4,25
12,49
4,78
15,5
5,31
18,9
0,68
0,32
0,85
0,49
1,02
0,69
1,19
0,91
1,36
1,17
1,70
1,77
2,04
2,47
2,38
3,29
2,72
4,21
3,06
5,24
3,40
6,36
0,71
0,28
0,83
0,38
0,94
0,48
1,18
0,73
1,42
1,02
1,65
1,35
1,89
1,73
2,12
2,16
2,36
2,62
1,21
0,64
1,39
0,82
1,56
1,02
1,73
1,24
1,19
0,53
1,33
0,65
The hr values must be multiplied by:
0.71 for galvanized or painted steel pipes
0.54 for stainless steel or copper pipes
0.47 for PVC or PE pipes
0,20
0,16
0,25
0,25
0,30
0,35
0,35
0,46
0,40
0,59
0,45
0,74
0,50
0,90
0,63
1,36
0,75
1,90
0,88
2,53
1,01
3,23
1,26
4,89
1,51
6,85
2,01
11,66
2,51
17,6
3,02
24,7
3,52
32,8
4,02
42,0
4,52
52,3
5,03
63,5
6,28
96,0
7,54
134
8,79
179
0,30
0,27
0,33
0,33
0,41
0,49
0,50
0,69
0,58
0,92
0,66
1,18
0,83
1,78
1,00
2,49
1,33
4,24
1,66
6,41
1,99
8,98
2,32
11,9
2,65
15,3
2,99
19,0
3,32
23,1
4,15
34,9
4,98
48,9
5,81
65,1
6,63
83,3
8,29
126
0,32
0,23
0,37
0,31
0,42
0,40
0,53
0,60
0,64
0,84
0,85
1,43
1,06
2,16
1,27
3,03
1,49
4,03
1,70
5,16
1,91
6,41
2,12
7,79
2,65
11,8
3,18
16,5
3,72
21,9
4,25
28,1
5,31
42,5
6,37
59,5
7,43
79,1
8,49
101
0,34
0,20
0,41
0,28
0,54
0,48
0,68
0,73
0,82
1,02
0,95
1,36
1,09
1,74
1,22
2,16
1,36
2,63
1,70
3,97
2,04
5,57
2,38
7,40
2,72
9,48
3,40
14,3
4,08
20,1
4,76
26,7
5,44
34,2
6,79
51,6
8,15
72,3
0,38
0,20
0,47
0,30
0,57
0,42
0,66
0,56
0,75
0,72
0,85
0,89
0,94
1,08
1,18
1,63
1,42
2,29
1,65
3,05
1,89
3,90
2,36
5,89
2,83
8,26
3,30
11,0
3,77
14,1
4,72
21,2
5,66
29,8
6,61
39,6
7,55
50,7
8,49
63,0
0,42
0,20
0,49
0,26
0,55
0,34
0,62
0,42
0,69
0,51
0,87
0,77
1,04
1,08
1,21
1,44
1,39
1,84
1,73
2,78
2,08
3,90
2,43
5,18
2,77
6,64
3,47
10,0
4,16
14,1
4,85
18,7
5,55
23,9
6,24
29,8
6,93
36,2
G-at-pct_a_th
hr = flow resistance for 100m of straight pipeline (m)
V = water speed (m/s)
103
TECHNICAL APPENDIX
FLOW RESISTANCE
TABLE OF FLOW RESISTANCE IN BENDS, VALVES AND GATES
The flow resistance is calculated using the equivalent pipeline length method according to the table below:
DN
ACCESSORY
TYPE
25
32
40
50
45° bend
90° bend
90° smooth bend
Union tee or cross
Gate
Non return valve
0,2
0,4
0,4
1,1
1,1
0,2
0,6
0,4
1,3
1,5
0,4
0,9
0,4
1,7
1,9
0,4
1,1
0,6
2,1
0,2
2,4
65
80
100
125
Equivalent pipeline length (m)
0,6
0,6
0,9
1,1
1,3
1,5
2,1
2,6
0,9
1,1
1,3
1,7
2,6
3,2
4,3
5,3
0,2
0,2
0,4
0,4
3,0
3,4
4,7
5,9
150
200
250
300
1,5
3,0
1,9
6,4
0,6
7,4
1,9
3,9
2,8
7,5
0,9
9,6
2,4
4,7
3,4
10,7
1,1
11,8
2,8
5,8
3,9
12,8
1,3
13,9
G-a-pcv_a_th
The table is valid for the Hazen Williams coefficient C = 100 (cast iron pipework). For steel pipework, multiply the
values by 1.41. For stainless steel, copper and coated cast iron pipework, multiply the values by 1.85.
When the equivalent pipeline length has been determined, the flow resistance is obtained from the table of
flow resistance.
The values given are guideline values which are bound to vary slightly according to the model, especially for gate
valves and non-return valves, for which it is a good idea to check the values supplied by the manufacturers.
TECHNICAL APPENDIX
104
V
OL
UMETRIC
CAP
ACITY
OLUMETRIC
CAPACITY
VOLUMETRIC
CAPACITY
Litres
Cubic metres
Cubic feet
Cubic feet
Imp. gal.
US gal.
per minute
per hour
per hour
per minute
per minute
per minute
l/min
m3/h
ft3/h
0,0600
1,0000
0,0283
1,6990
0,2728
0,2271
1,0000
16,6667
0,4719
28,3168
4,5461
3,7854
ft3/min
0,0353
0,5886
0,0167
1,0000
0,1605
0,1337
Imp. gal/min
0,2200
3,6662
0,1038
6,2288
1,0000
0,8327
Us gal./min
0,2642
4,4029
0,1247
7,4805
1,2009
1,0000
Pound force per
square inch
psi
1.45 x 10-4
0,1450
14,5038
1,0000
1,4223
0,0193
metre
of water
m H 2O
1.02 x 10-4
0,1020
10,1972
0,7031
1,0000
0,0136
millimetre of
mercury
mm Hg
0,0075
7,5006
750,0638
51,7151
73,5561
1,0000
2,1189
35,3147
1,0000
60,0000
9,6326
8,0208
PRESSURE
AND
HEAD
SURE
AND
HEAD
PRESSURE
PRES
Newton per
square metre
N/m2
1,0000
1000,0000
1 x 105
6894,7570
9806,6500
133,3220
kilo Pascal
bar
kPa
bar
1 x 10-5
0,0100
1,0000
0,0689
0,0981
0,0013
0,0010
1,0000
100,0000
6,8948
9,8067
0,1333
LENGTH
TH
LENGTH
LENG
millimetre
centimetre
metre
inch
foot
yard
mm
cm
m
in
ft
yd
1,0000
10,0000
1000,0000
25,4000
304,8000
914,4000
0,1000
1,0000
100,0000
2,5400
30,4800
91,4400
0,0010
0,0100
1,0000
0,0254
0,3048
0,9144
0,0394
0,3937
39,3701
1,0000
12,0000
36,0000
0,0011
0,0033
0,0328
3,2808
0,0833
1,0000
3,0000
0,0109
1,0936
0,0278
0,3333
1,0000
VOLUME
OL
UME
OLUME
V
cubic metre
m
3
1,0000
0,0010
1 x 10-6
0,0045
0,0038
0,0283
litre
millilitre
imp. Gallon
US gallon
cubic foot
litro
ml
imp. gal.
US gal.
ft3
1000,0000
1,0000
0,0010
4,5461
3,7854
28,3168
1 x 106
1000,0000
1,0000
4546,0870
3785,4120
28316,8466
219,9694
0,2200
2.2 x 10-4
1,0000
0,8327
6,2288
264,1720
0,2642
2.642 x 10-4
1,2009
1,0000
7,4805
35,3147
0,0353
3.53 x 10-5
0,1605
0,1337
1,0000
G-at_pp-en_a_sc
105
TECHNICAL APPENDIX
FURTHER PRODUCT SELECTION AND DOCUMENT
ATION
DOCUMENTA
Xylect
Xylect is pump solution selection software with an extensive online database of product information across the entire
Lowara, and Vogel range of pumps and related products, with multiple search options and helpful project management
facilities. The system holds up-to-date product information on thousands of products and accessories.
The possibility to search by applications and the detailed information output given makes it easy to make the optimal
selection without having detailed knowledge about the Lowara and Vogel products.
The search can be made by:
•
Application
•
Product type
•
Duty point
Xylect gives a detailed output:
•
List with search results
•
Performance curves (flow, head, power,
efficiency, NPSH)
•
Motor data
•
Dimensional drawings
•
Options
•
Data sheet printouts
•
Document downloads incl dxf files
TECHNICAL APPENDIX
The search by application guides users not familiar with
the product range to the right choice.
106
FURTHER PRODUCT SELECTION AND DOCUMENT
ATION
DOCUMENTA
Xylect
The detailed output makes it easy to select the optimal pump from the given alternatives.
The best way to work with Xylect is to create a
personal account. This makes it possible to:
•
Set own standard units
•
Create and save projects
•
Share projects with other Xylect users
Every user have a My Xylect space, where all projects
are saved.
For more information about Xylect please contact
our sales network or visit www.xylect.com.
Dimensional drawings appear on the screen and can be
downloaded in dxf format.
107
TECHNICAL APPENDIX
Xylem
1) The tissue in plants that brings water upward from the roots;
2) a leading global water technology company.
We’re 12,000 people unified in a common purpose: creating innovative solutions
to meet our world’s water needs. Developing new technologies that will improve
the way water is used, conserved, and re-used in the future is central to our work.
We move, treat, analyze, and return water to the environment, and we help people
use water efficiently, in their homes, buildings, factories and farms. In more than 150
countries, we have strong, long-standing relationships with customers who know us
for our powerful combination of leading product brands and applications expertise,
backed by a legacy of innovation.
For more information on how Xylem can help you, go to xyleminc.com.
Headquarters
LOWARA S.r.l. Unipersonale
Via Vittorio Lombardi 14
36075 Montecchio Maggiore - Vicenza - Italy
Tel.(+39) 0444 707111 - Fax(+39) 0444 492166
e-mail: lowara.mkt@xyleminc.com
web: www.lowara.com - www.completewatersystems.com
LOWARA reserves the right to make modification without prior notice.
LOWARA is a trademark of Xylem Inc. or one of its subsidiaries.