PLUMBING FIXTURE SCHEDULE
TAG
WC-1
WC-2
FIXTURE
ADA TANK TYPE FLOOR MOUNT
WATER CLOSET
TANK TYPE FLOOR MOUNT
WATER CLOSET
MANUF.
MODEL
ACCESSORIES
SUPPLIES
TRAP
ROUGH-IN
HEIGHT
CW
KOHLER
K-3609 CIMARRON
SEAT - CHURCH 295SSC
-
INTEGRAL
18"
1/2"
-
4"
2"
KOHLER
K-3609 CIMARRON
SEAT - CHURCH 295SSC
-
INTEGRAL
18"
1/2"
-
4"
2"
UR-1
ADA WALL HUNG URINAL
KOHLER
K-4904-ET BARDON
FLUSH VALVE - SLOAN 186-1.0
LAV-1
ADA WALL HUNG LAVATORY
KOHLER
K-2005 KINGSTON
MOEN 8413F05
LAV-2
WALL HUNG LAVATORY
KOHLER
K-2005 KINGSTON
MS-1
MOP SERVICE SINK
FIAT
MSB-2424
SH-1
ADA SHOWER
MOEN
T8346, T8371HD
INTEGRAL
LOOSE KEY
CHROME
CHROME TRAP
LOOSE KEY
CHROME
CHROME TRAP
MOEN 8413F05
830-AA FAUCET, 889-CC BRACKET, E-77-AA
GUARDS, 832AA HOSE
BALL VALVES
2.5 GPM FLOW CONTROL, SUPPLY STOPS
INTEGRAL
CONNECTIONS
HW
WASTE
VENT
REMARKS
17"
3/4"
-
2"
1-1/2"
3
34"
1/2"
1/2"
1-1/2"
1-1/2"
3
31"
1/2"
1/2"
1-1/2"
1-1/2"
3
PVC
FLOOR
1/2"
1/2"
3"
1-1/2"
FLOOR DRAIN
HEAD 6'-0"
1/2"
1/2"
-
-
2
FLOOR DRAIN
PVC
JR SMITH
2005-A-NB ROUND
FLOOR
2"
1-1/2"
1, 4
CAST IRON NSF 8" DEEP FLOOR
SINK
3/4 GRATE
PVC
FS-1
JR SMITH
3410Y-13
FLOOR
3"
1-1/2"
1, 4
REMARKS:
GENERAL: INSTALL ADA FIXTURES PER LATEST ADA STANDARDS. INSTALL FLUSH VALVES WITH HANDLES TOWARD THE WIDE SIDE OF THE STALL.
PROVIDE ADA SINKS AND LAVATORIES WITH INSULATED TRAPS, STOPS AND SUPPLIES.
PROVIDE CHROME PLATED COMMERCIAL GRADE STOPS AND SUPPLIES.
1. VERIFY EXACT LOCATION OF DRAIN WITH THE ARCHITECT/GENERAL PRIOR TO INSTALLATION.
2. PROVIDE SHOWER VALVE WITH SINGLE LEVER PRESSURE BALANCED VALVE, INTEGRAL STOPS, TEMPERATURE LIMIT STOPS, HAND HELD SHOWER, 30" SLIDE BAR, 69" HOSE. 2.5 GPM FLOW.
3. PROVIDE WITH FLOOR CARRIER
4. PROVIDE TRAP PRIMER PORT. PROVIDE TRAP PRIMER VALVE WITH DISTRIBUTION UNIT. CONNECT UP TO FOUR DRAINS TO ONE TRAP PRIMER. CAP ANY UNUSED CONNECTIONS. PROVIDE BALL VALVE AND TOP PIPE CONNECTION FOR EACH
VALVE.
FD-1
WC-1,2
Cimarron®
Comfort Height® Toilet
K-3609
Features
•
•
•
•
•
•
•
•
•
•
•
•
Vitreous china.
Two-piece toilet.
Comfort Height® Elongated bowl.
AquaPiston® flushing system.
Includes left-hand polished chrome trip lever.
1.28 gpf (4.8 lpf).
2-1/8" (54 mm) fully glazed trapway.
12" (305 mm) rough-in.
Less seat and supply.
10-1/2" (267 mm) x 7-1/8" (181 mm) water area.
28-3/4" (730 mm) x 17-5/8" (447 mm) x 30-3/4" (781 mm).
Floor mount / Floor outlet.
Recommended Accessories
K-4650 Toilet Seat
K-7637 Angle Supply with Stop (single)
Components
Product includes:
K-4309 Elongated Toilet Bowl
K-4421 Toilet Tank
Additional included component/s: Tank cover, Trip lever, Bolt
cap accessory pack, and Tank accessory pack.
CSA B651 OBC
Codes/Standards
ASME A112.19.2/CSA B45.1
DOE - Energy Policy Act 1992
EPA WaterSense®
ADA
ICC/ANSI A117.1
CSA B651
OBC
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
Color
Code Description
0
White
96
Biscuit
47
Almond
NY
Dune
95
Ice™ Grey
G9
Sandbar
7
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
5-23-2015 08:10
Black Black™
Cimarron®
Comfort Height® Toilet
K-3609
For Back-to-Back Installations
Technical Information
All product dimensions are nominal.
Toilet type:
Two-piece
Bowl shape:
Elongated front
Flush type:
AquaPiston
Trap passageway:
2-1/8" (54 mm)
Water Consumption
Full:
1.28 gpf (4.8 lpf)
Water surface size:
10-1/2" x 7-7/8" (267 mm x 200 mm)
Rim to water surface: 6-3/8" (162 mm)
Rough-in:
12" (305 mm)
Seat-mounting holes: 5-1/2" (140 mm)
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
5-23-2015 08:10
Notes
Install this product according to the installation
guide.
For back-to-back toilet installations: Use only a
45° double wye fitting.
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
The Model Plumbing Codes require the
installation of elongated open-front toilet seats
on public bathrooms.
C O M M E R C I A L
P L A S T I C
S E A T S
WC-1,2
MODEL 295C
• ELONGATED
• SOLID
SERIES
SEAT, OPEN FRONT LESS COVER
PLASTIC
• POSTUREPEDIC
• CONCEALED
5 1/2"
18 1/2"
7 7/8"
19"
CONTOUR DESIGN
300 SERIES STAINLESS STEEL CHECK HINGES
Seats shall be No. ____________ as manufactured by Church Seats.
Seats shall be heavy weight and injection-molded of solid plastic. Seats
shall be open front less cover for elongated bowl and feature exclusive
Posturepedic contour design and four large molded-in bumpers.
Concealed check hinges to feature 300 Series stainless steel posts that
stop seat 11 degrees beyond vertical. Uses 300 Series stainless steel
hardware. Color to be
. (specify white or fixture manufacturer’s
color) Hinges shall be
. (specify hinge type)
3 1/4"
14 1/4"
Ring thickness is 13/16"
Ring thickness including the bumper is 1"
Height of Seat is 2-1/4"
Church Seats, Sheboygan Falls, WI 53085
www.ChurchSeats.com
295C Concealed check hinge stops seat 11° beyond vertical.
295SSC Self-sustaining, concealed stainless steel check hinge holds seat in any raised position
up to 11° beyond vertical.
Phone: 920-467-2664 800-233-7328 Fax: 920-467-8573
UR-1
Bardon™ 1/8th GPF
High Efficiency Urinal (HEU)
K-4904-ET
Features
•
•
•
•
•
•
•
•
Vitreous china.
Washout flushing action.
3/4" top spud.
14-1/8" (359 mm) extended rim.
0.125 gpf (0.47 lpf) to 1.0 gpf (3.8 lpf).
WaterSense® compliant when used with WaterSense
flushometer.
Will replace K-4960-ET urinal.
26-7/8" (683 mm) x 18" (457 mm) x 14-1/8" (359 mm)
Recommended Accessories
K-10668 WaterSense® 0.125 gpf Exposed Flushometer
K-10949 Tripoint™ DC 1/8 GPF Urinal Flushometer
K-13520 WaterSense® 0.125 gpf Exposed Flushometer
K-10675 WAVE DC 0.5 GPF Urinal Flushometer
K-10958 Tripoint™ DC 0.5 GPF Urinal Flushometer
K-13519 0.5 gpf Exposed Flushometer
K-10676 WAVE DC 1.0 GPF Wshdwn Flushometer
K-10960 1.0 gpf Exposed Flushometer
K-13518 1.0 gpf Exposed Flushometer
Components
Additional included component/s: 3/4" inlet spud, 2" outlet spud,
Strainer, and Hangers (2).
Codes/Standards
ASME A112.19.2/CSA B45.1
EPA WaterSense®
ADA
ICC/ANSI A117.1
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
Color
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
5-23-2015 04:47
Code Description
0
White
96
Biscuit
47
Almond
7
Black Black™
Bardon™ 1/8th GPF
High Efficiency Urinal (HEU)
K-4904-ET
21"
Technical Information
All product dimensions are nominal.
Spud size:
3/4"
Notes
Install this product according to the installation
guide.
ADA compliant when installed to the specific
requirements of these regulations.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
5-23-2015 04:47
UR-1
Buy
om
n
t
t
Ac t •
n
C
C
plia
•
Ac t •
Buy
n
•
om
n
e r i ca
Am
e r i ca
Am
plia
Sloan® Model
Flushometer
u
u
u
u
186
Description
Exposed Urinal Flushometer for ¾” top spud urinals.
Flush Cycle
£ Model 186 Water Saver (1.5 gpf/5.7 Lpf)
£ Model 186-1.0 Low Consumption (1.0 gpf/3.8 Lpf)
Variations
£ DFB
Dual Filtered Fixed Bypass Diaphragm
Specifications
Quiet, Exposed, Diaphragm Type, Chrome Plated Urinal Flushometer with the following
features:
• High Chloramine Resistant PERMEX™ Synthetic Rubber Diaphragm with Linear
Filtered Bypass and Vortex Cleansing Action™
• ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle
Packing
• ¾” I.P.S. Screwdriver Bak-Chek™ Angle Stop
• Vandal Resistant Stop Cap
• Adjustable Tailpiece
• Vacuum Breaker with Flush Connection
• Spud Coupling and Spud Flange for ¾” Top Spud
• Sweat Solder Adapter with Cover Tube and Cast Wall Flange
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Non-Hold-Open Handle and No External Volume Adjustment to Ensure Water
Conservation
• Low Consumption flush accuracy
• Handle Packing, Stop Seat and Vacuum Breaker Molded from PERMEX™ Rubber
Compound for Chloramine Resistance
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy
Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections
of ASSE 1037.
u
Accessories
See Accessories Section of the Sloan catalog for details on these and other Flushometer
variations.
Certified
This space for Architect/Engineer approval
The information contained in this document is subject to change without notice.
Sloan 186 S.S. — Rev. 0d (06/10)
Copyright © 2010 SLOAN VALVE COMPANY
SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL 60131
Ph: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380
www.sloanvalve.com
LAV-1
LAV-2
Kingston™
Wall-Mount Bathroom Sink
K-2005
Features
•
•
•
•
With hanger.
With overflow.
4" (102 mm) centers.
21-1/4" (540 mm) x 18-1/8" (460 mm).
Material
•
Vitreous china.
Installation
•
Wall-mount
Recommended Accessories
K-8998 P-Trap
Components
CSA B651 OBC
Additional included component/s: Hanger.
Codes/Standards
ASME A112.19.2/CSA B45.1
ADA
ICC/ANSI A117.1
CSA B651
OBC
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
Color
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
5-23-2015 05:21
Code Description
0
White
96
Biscuit
47
Almond
7
Black Black™
Kingston™
Wall-Mount Bathroom Sink
K-2005
Concealed Arm Hole Locations
Technical Information
All product dimensions are nominal.
Bowl configuration:
Single
Installation:
Wall-mount
Bowl area (Only)
Length: 16" (406 mm)
Width: 10" (254 mm)
Water depth: 3-1/8" (79 mm)
Number of deck holes: 3
Soap/Lotion hole:
1-1/4" (32 mm)
Drain hole:
1-3/4" (44 mm)
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
5-23-2015 05:21
Notes
Install this product according to the installation
guide.
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
LAV-1
LAV-2
S p e c ­i ­f i ­c a ­t i o n s
COMMERCIAL
DESCRIPTION
•
•
•
•
Solid brass construction
Chrome, Brushed Chrome or Brushed Nickel finish
1/2" IPS connections
Solid brass waterways
OPERATION
• Lever handle
• Temperature controlled through 110˚ arc of handle
FLOW
•
Single Handle Lavatory Faucet
Standard aerator is limited to 2.2 gpm max. (8.3 L/min)
CARTRIDGE
• Ceramic disc cartridge *(with temperature limit stop)
• Nonmetallic/nonferrous and ceramic material
STANDARDS
•
•
•
•
MODEL
8413
8413F15
8413F05
8413F03
8414
8414BC
8414BN
Third party certified to WaterSense® (only applies to 1.5 gpm),
ASME A112.18.1/CSA B125.1, and all applicable requirements
referenced therein including NSF 61/9
Contains no more than 0.25% weighted average lead content
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
ADA
for lever handles
FLOW (gpm)
2.2
1.5
0.5
0.35
2.2
2.2
2.2
DRAIN
Without
Without
Without
Without
Metal
Metal
Metal
FINISH
Chrome
Chrome
Chrome
Chrome
Chrome
Brushed Chrome
Brushed Nickel
WATERSENSE
CERTIFIED
x
WARRANTY
• Warranted for 5 years against material or manufacturing defects
See table above
NOTE: This faucet is designed to be
installed thru 3 holes, 1" min. dia.
HOT
COLD
55˚
55˚
7"
(128mm)
6"
(153mm)
6-5/8"
(168mm)
5-5/8"
(143mm)
2-1/2"
(64mm)
5"
(127mm)
1-1/8" MAX.
(29mm)
2"
(51mm)
2"
(51mm)
2-7/16"
(62mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 9/12
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
www.moen.com
M
OLDED-STONE®
MOP SERVICE BASIN
MSB 2424
MSB 3624
MS-1
Molded-Stone® Mop Service Basin
FEATURES
• MSB 2424
The MSB 2424 shall have overall outside
dimensions of 24” x 24” x 10”. The molding
shall be done in matched metal dies under heat
and pressure resulting in a one-piece
homogeneous product. The unit shall have 10”
high walls with not less than 1” wide.
The stainless steel drain body is designed to
provide for a caulk connection or QDC-3 joint to
a 3” drain pipe. A combination dome strainer
and lint basket made from stainless steel shall
be included with factory installed stainless steel
drain body for caulked joint to accept a 3” pipe.
• MSB 3624
NOTES
OPTIONS
• Service Faucet (830-AA): Chrome plated with vacuum
breaker, integral stops, adjustable wall brace, pail hook and
3
⁄4” hose thread on spout.
The MSB 3624 shall have overall outside
dimensions of 36” x 24” x 10”. The molding
shall be done in matched metal dies under heat
and pressure resulting in a one-piece
homogeneous product. The unit shall have 10”
high walls with not less than 1” wide shoulders
and an integrally molded shelf 10 9⁄16” wide where
indicated.
The stainless steel drain body is designed to
provide for a caulk connection or QDC-3 joint to
a 3” drain pipe. A combination dome strainer
and lint basket made from stainless steel shall
be included with factory installed stainless steel
drain body for caulked joint to accept a 3” pipe.
• Hose and Hose Bracket (832-AA)
• Mop Hanger (889-CC)
• Alternate Strainer (1453-BB) - For residential use (EFS-3624
and EFS-2424)
• 3” Quick Drain Connector (QDC-3XH): Neoprene connecting
gasket suitable for attaching extra heavy cast iron soil pipe
and Schedule 40 steel pipe to the drain body. Neoprene
connecting gasket (QDC-3SN) suitable for attaching hubless
cast iron pipe (no hub, nominal O.D. of 3.31”) and service
weight cast iron soil pipe (nominal O.D. of 3.38”) to the drain
body.
• Silicone Sealant (833-AA)
• Vinyl Bumperguard (E-77-AA)
• Stainless Steel Bumperguard (E-88-AA)
• Stainles Steel Wall Guard (MSG2424, MSG2828, MG3232,
MSG3636, and MSG3624)
FIAT PRODUCTS
¤
A CRANE PLUMBING COMP ANY
CR/PL© 04/03 Printed in U.S.A.
M
OLDED-STONE®
MOP SERVICE BASIN
MSB 2424
MSB 3624
Molded-Stone® Mop Service Basin
FIAT PRODUCTS
¤
A CRANE PLUMBING COMP ANY
IMPORTANT: Roughing-in dimensions may vary 1/2" and are subject to change or cancellation without prior notice.
CR/PL© 04/03 Printed in U.S.A.
SH-1
Spec­i ­fi­c a­t ions
COMMERCIAL
DESCRIPTION
•
•
•
•
•
•
Metal and brass construction with Chrome plated finish, also in
Classic Brushed Nickel (CBN) finish
Pressure balancing cycle valve
Contains: hand-held shower, with non-positive pause, 30" slide bar, drop ell,
vacuum breaker, 69" metal hose and mounting hardware
Slide bar is NOT DESIGNED TO BE A GRAB BAR
Supplied with vandal resistant screws
Quick cleaning rubber nozzles
OPERATION
•
•
•
•
•
•
Temperature valve has ADA compliant lever style handle
Handle operates counterclockwise through a 270° arc
with off at 6 o'clock, and maximum hot at the 9 o'clock position.
Shut off in clockwise direction
Adjustable temperature limit stop
Pressure balancing mechanism maintains selected discharge temperature to ± 3.6°
Single function spray pattern
Easy to operate pause button (reduces the flow of water to a trickle)
FLOW
T8346 (2.5gpm/9.5 lpm) - Chrome finish
T8346CBN (2.5gpm/9.5 lpm) - CBN finish
T8346EP15 (1.5gpm/5.7 lpm) - Chrome finish; WaterSense® Certified
T8346EP15CBN (1.5gpm/5.7 lpm) - CBN finish; WaterSense® Certified
Single-Handle Posi-Temp
Handheld Shower System
CARTRIDGE
•
•
•
•
•
•
•
•
Pair with a brass Posi-Temp rough-in valve:
8370HD*: 1/2" CC connection without integral stops
8371HD*: 1/2" CC connection with integral stops
8372HD*: 1/2" IPS connection with integral stops
8373HD*: 1/2" PEX connection with integral stops
8374HD*: 1/2" CPVC connection with integral stops
8375HD*: 1/2" UPONOR connection with integral stops
*Includes the 1222HD Brass Posi-Temp Cartridge
Accommodates back to back installations
Model: T8346, T8346CBN
STANDARDS
•
Third party certified to WaterSense® (only applies to 1.5 gpm)
ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein
•
ADA
for lever handle
WARRANTY
•
Warranted for 5 years against material or manufacturing defects
2" Dia.
1/2-14 NPT
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
DROP ELL
2" Diameter
1/2-14
NPSL
THREAD
FINISHED
WALL LINE
1/2-14 NPT
8-1/8" (206mm)
SPRAY WAND
HEIGHT
3-5/16" (85mm)
SPRAY HEAD
DIAMETER
1/2-14
NPSL THREAD
DROP ELL
7" (178mm)
ESC. DIAM.
Vacuum
Breaker
28-1/2"
NOMIMAL
(723mm)
H
3/16" (21mm) - 2" (51mm)
with optional adapter
2-1/2" MAX.
(63mm)
ESCUTCHEON
CL
C
DIRECTION
OF HANDLE
ROTATION
4-1/2" (114mm)
PLASTER GUARD
OPENING
6'-6"
(1981mm)
NOMINAL
3" (76mm)
MIN. WALL
CAVITY
45" (1143)
48" (1219mm)
FLOOR LINE
NOMINAL
HANDLE
6'-6" (1981mm)
NOMINAL
FINISHED
WALL LINE
TUB RIM
FLOOR LINE
*Refer to (ADAAG) guidelines or local codes for proper ADA installation.
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 11/12
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
www.moen.com
FD-1
A
NONE
5-17-85
FLOOR OR SHOWER DRAINS
FUNCTION: General service floor drain for use in showers, toilets, kitchens and other finished areas where foot traffic is expected.
The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are
finished in material of square or straight line pattern. Reversible flashing collar permits adjustment of the strainer to meet finished
floor level.
WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA
TD
G
IN
I
ve
nti N E E R Cu
n
on R
ather Tha
MEMBER OF:
WITH ADJUSTABLE STRAINER HEADS
S2005
DRAWING NUMBER
9 (230) DIA
Low
Position
High
Position
B DIA or SQ
X-MIN
MAX
XX-MIN
MAX
TD
PJ
2005
9 (230) DIA
Low
Position
High
Position
B DIA or SQ
X-MIN
MAX
XX-MIN
MAX
▼ 2 5/8"(67)
1 1/4 (32)
4(100)
1 1/4 (32)
Trap Primer
Connection
(When Specified)
**6 3/4 (170)
4(100)
Trap Primer
Connection
(When Specified)
Seepage
Openings
A
A
Seepage
Openings
**6 3/4 (170)
A (Pipe Size) = 02(50), 03(75), 04(100), 05(125) or 06(150)
SPEEDI-SET OUTLET
NO-HUB OUTLET
Fig. 2005Y……(A) ROUND TOP
Fig. 2005Y.……(B) SQUARE TOP
Fig. 2005L……(A) ROUND TOP
Fig. 2005L……(B) SQUARE TOP
Outlet
Size
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
SIZE
SCALE:
DATE:
APPROVED BY:
CHECKED BY:
DRAWN BY:
FIGURE
NUMBER
®
NITARY
SA
®
P
ASPE
EN e
r
CUSTOMER
DRIVEN
MEMBER OF ACORN’S FAMILY OF COMPANIES
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
Q
SMITH MFG. CO.
LOCATION
®
re
SMITH ® JAY R.
Nickel Bronze
Strainer Head
▲ 02(50) 05(125) DIA or SQ
▲ 03(75) 06(150) DIA or SQ
▲ 04(100) 08(205) DIA or SQ
Strainer
Size
B
DIA or SQ
05 (125)
06 (150)
07 (180)
08 (205)
•09 (230)
•10 (255)
▼ This dimension to internal stop of speedi-set gasket.
• Add 3/8"(10) to all min/max dimensions for round strainers.
* Collar is reversible to obtain extreme high and low strainer
positions.
•• Not available for 5"(125) size strainer.
** MIN 6 3/4"(170) hole required for core drilled application.
VARIATIONS:
REGULARLY FURNISHED:
Duco Cast Iron Body with Flashing
Collar and Adjustable Strainer Head
as Indicated by Suffix Letter Selected.
NOTE: Dimensions shown in
parentheses are in millimeters.
▲ Meets ASME Standard A112.6.3-2001
••
Flapper Type Backwater Valve -V
Hinged Grate -H
L Speedi-Set Service Weight
2(50), 3(75) & 4"(100) only
LXH Speedi-Set Extra Heavy
2(50), 3(75) & 4"(100) only
Sediment Bucket -B
Trap Primer Connection -P050
1/2" (13) & -P075 3/4" (19)
Vandal Proof Screws -U
Wide Flanged Strainer (Specify
Fig. DX2005)
T Threaded Outlet
Heelproof Grate -HP
-AHP (Round) or -BHP (Square)
*Collar
In High
Position
X
MIN
MAX
1 1/4(32)
1 1/4(32)
1 1/4(32)
1 1/2(38)
1 1/2(38)
1 1/2(38)
2 1/4(57) 3/4(19)
2 1/4(57) 3/4(19)
2 1/4(57) 7/8(22)
2 1/2(64) 1(25)
2 3/8(60) 1(25)
2 3/8(60) 1(25)
11-18-11
11-20-09
12/18/08
10/24/06
REV.
DATE
Rev. Dwg., Var.
Revised Variations
Addition to Variations
NO-HUB to SPEEDI-SET
DESCRIPTION
1 5/8(41)
1 5/8(41)
1 7/8(48)
1 7/8(48)
1 7/8(48)
1 7/8(48)
7(45)
9(58)
14(90)
17(110)
18(116)
23(48)
6.5(42)
12.5(81)
11(71)
14(90)
16(103)
16(103)
OPTIONAL MATERIALS:
Bronze Body -BB
Chrome Plated Strainer -CP
Galvanized Cast Iron Body -G
Nickel Bronze Strainer -NB
Polished Bronze Strainer -PB
Stainless Steel (Specify Fig. 9700-A)
02(50), 03(75) or 04"(100) sizes only.
Q
P
N
M
*Collar
Free Area
In Low
SQ IN
Position
(SQ CM)
XX
MIN
MAX ROUND SQUARE
SEE PM0457 FOR
OPTIONAL STRAINER HEADS.
TBW
RN
JJ
RN
CR
BW
BW
CL
BY
CKD. BY
WEIGHT
POUNDS
VOLUME
CUBIC FEET
FIGURE NUMBER
2005
LOCATION
PM0457 SH 1 of 2
G
IN
I
ve
nti N E E R Cu
n
on R
ather Tha
FLAPPER TYPE BACKWATER VALVE
ROUND STRAINER
ASSUME NO RESPONSIBILIT OR USE OF SUPERSEDED OR VOID DATA
B
H
B DIA 05 (125)
H
2 (51)
MIN 1 1/4 (32)
X MAX 2 1/4 (57)
VARIATIONS:
MATERIALS:
Chrome Plated -CP *Hinged Grate (Specify
Suffix -AH)
Polished Bronze -PB
Sediment Bucket -B
Nickel Bronze -NB
Vandal Proof Screws -U
06 (150)
2 (51)
1 1/4 (32)
2 1/4 (57)
07 (180)
2 1/4 (57)
1 1/4 (32)
2 1/4 (57)
08 (205)
2 1/2 (64)
1 1/2 (38)
2 1/2 (64)
09 (230)
2 1/2 (64)
1 1/2 (38)
2 1/2 (64)
SUFFIX -A
MATERIALS:
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
H
B DIA 05 (125)
H
2 (51)
MIN 1 1/4 (32)
X
MAX 2 1/4 (57)
06 (150)
2 (51)
1 1/4 (32)
2 1/4 (57)
07 (180)
2 1/4 (57)
1 1/4 (32)
2 1/4 (57)
B DIA 05 (125)
H
2 (51)
X MIN 1 1/4 (32)
MAX 2 1/4 (57)
10 (255)
2 3/4 (70)
1 1/2 (38)
2 3/4 (70)
FIGURE
NUMBER
SUFFIX -C
06 (150)
2 (51)
1 1/4 (32)
2 1/4 (57)
Flapper Type Backwater Valve
(Specify Suffix -BV) 05 (125),
06 (150), 07 (180) or 08" (205)
sizes only
*Hinged Grate (Specify Suffix -BH)
Sediment Bucket -B
Vandal Proof Screws -U
08 (205)
09 (230)
2 1/2 (64) 2 1/4 (57)
1 1/2 (38) 1 1/2 (38)
2 1/2 (64) 2 1/4 (57)
08 (205)
2 1/2 (64)
1 1/2 (38)
2 1/2 (64)
MATERIALS:
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
6
6 (150)
3 1/8(79)
3 1/8
10 (255)
2 1/4 (57)
1 1/2 (38)
2 3/8 (60)
REINFORCED TRACTOR STRAINER
FUNCTION: Used in finished floors where medium weight wheeled loads are
anticipated and loose set non-tilt tractor grate is desired.
VARIATIONS:
Flapper Type Backwater
Valve (Specify Suffix -CV)
Sediment Bucket -B
Vandal Proof Screws -U
MATERIALS:
Cast Iron -CI
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
B
H
SUFFIX
10 (255)
2 3/4 (70)
1 7/8 (48)
2 3/4 (70)
-D
-E
Specify Type, Size & Finish eg: C06NB
FUNCTION: Used in a non-traffic area when a funnel type strainer head
is required and space does not allow use of the 3500 series funnel. The
extended rim allows use as an anti-flood and anti-splash drip pan.
VARIATIONS:
Flapper Type Backwater
Valve (Specify Suffix
-F37V or F38V)
B
H
REV.
DATE
Specify Type, Size & Finish eg: F06NB
Revised Suffix-BS
Revised
Revised Tables
Added Nickel Bronze
DESCRIPTION
NOTE: Dimensions shown in parenthesis are in millimeters.
X
B
H
DIA
MIN
MAX
07 (180) 3 1/4 (83) 2 5/8 (67) 3 1/2 (89)
09 (230) 3 1/2 (89) 2 3/4 (70) 3 1/2 (89)
ADJUSTABLE STRAINER HEAD
MIN
MAX
1 1/4 (32) 2 1/8 (54)
10-4-01
8-24-99
6-11-99
11-4-97
VARIATIONS:
Flapper Type Backwater
Valve (Specify Suffix -DV
or -EV)
Sediment Bucket -B
Vandal Proof Screws -U
Specify Type, Size & Finish eg: D09PB
E09PB
SUFFIX -D-E
FUNCTION: Provides integral flange set 5/32" (4) below rim to receive floor
covering. Flange may have option of tapped holes for securing pan and
gasket.
MATERIALS:
VARIATIONS:
Chrome Plated -CP Flapper Type Backwater
7 1/27 1/2
(190)
Polished Bronze -PB Valve (Specify Suffix
6
6 (150)
5/32
-FV)
5/32 (4) Nickel Bronze -NB
Holes in Flange -SH
Sediment Bucket -B
2
2
(51)
Vandal Proof Screws -U
X
G
E
F
E
VARIATIONS:
Gasketed Water Tight
Cover -GC
Secured Cover -SC
Secondary Strainer
Grate-SG
Specify Type, Size & Finish
eg: BSNB
SUFFIX -BS
TILE FLANGE
SUFFIX -F
08 (205)
2 1/2 (64)
1 1/2 (38)
2 1/2 (64)
VARIATIONS:
MATERIALS:
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
B DIA 05 (125)
H
2 (51)
MIN 1 1/4 (32)
MAX 2 1/4 (57)
07 (180)
2 1/4 (57)
1 1/4 (32)
2 1/4 (57)
STRAINER HEAD w/SQUARE HINGED COVER
FUNCTION: Used in finished floors where light wheeled loads are
anticipated.
H
06 (150)
2 (51)
1 1/4 (32)
2 1/4 (57)
VARIATIONS
Grate (Specify
Suffix -AH)
Vandal Proof Screws -U
* Hinged
Specify Type, Size & Finish eg: AV05NB
*Not available for 05" (125) size
SUFFIX -AV
Specify Type, Size & Finish eg: B05NB
*Not available for 05" (125) size
B
MATERIALS:
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
H
SQUARE STRAINER
B
FUNCTION: Provides backwater protection at point where protection is needed.
B
Specify Type, Size & Finish eg: A05NB
*Not available for 05" (125) size
SUFFIX -B
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
DRAWING NUMBER
A
SIZE
NONE
SCALE
5-17-85
DATE:
APPROVED BY:
MEMBER OF:
OPTIONAL STRAINER HEADS
TD
TD
PJ
CHECKED BY:
®
REINFORCED ROUND STRAINER
2010 SERIES OPTIONAL
STRAINER HEADS
DRAWN BY:
ASPE
P
CUSTOMER
DRIVEN
NITARY
SA
®
EN e
r
MEMBER OF ACORN’S FAMILY OF COMPANIES
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
G
SMITH MFG. CO.
®
re
SMITH ® JAY R.
SUFFIX -F37-F38
RN
TBW
CMD
EMB
CL
BY
CKD. BY
BS
BS
SUFFIX
B DIA
H
MIN
X MAX
-F37
07 (180)
3 1/4 (83)
2 5/8 (67)
3 1/2 (89)
-F38
09 (230)
3 1/2 (89)
2 3/4 (70)
3 1/2 (89)
MATERIALS:
Cast Iron -CI
Chrome Plated -CP
Galvanized Cast Iron -G
Polished Bronze -PB
Nickel Bronze -NB
Specify Type, Size & Finish eg: F37NB F38CP
FIGURE NUMBER
2010 SERIES OPTIONAL
STRAINER HEADS
1 0f 2
LOCATION
PM0457 SH 2 of 2
ASSUME NO RESPONSIBILIT OR USE OF SUPERSEDED OR VOID DATA
LOW DOME STRAINER
FUNCTION: Used in areas where intermittent
FUNCTION: Solid gas tight, vandal proof,
drain use is required. Solid cover prevents
threaded cover for areas where intermittent
intrusion of chips, saw-dust, etc., which are
drain use is required.
swept up before cover is opened for washdown.
MATERIALS:
VARIATIONS:
The secondary strainer prevents debris from
Chrome Plated -CP Flapper Type Backentering the waste line.
water Valve (Specify
Polished Bronze -PB
MATERIALS:
VARIATIONS:
B
Suffix -JV)
Cast Iron -CI
Flapper Type
Nickel Bronze -NB
Holes in Flange -SH
Backwater
H Chrome Plated -CP
Sediment Bucket -B
Polished Bronze
Valve (Specify
6(150)
Vandal Proof Screws -U
-PB
Suffix -GV)
Nickel Bronze -NB Vandal Proof
X
Screws -U
MIN MAX
FUNCTION: Used in gutters and recessed areas
where excessive debris build-up is expected.
Dome insures drainage even when partly
covered.
MATERIALS:
Chrome Plated -CP
B
Polished Bronze -PB
Nickel Bronze -NB
H VARIATIONS:
Flapper Type Backwater Valve
(Specify Suffix -GV)
Sediment Bucket -B
Vandal Proof Screws -U
B DIA 05 (125) 06 (150)
H
2 (51)
2 (51)
MIN 1 1/4 (32) 1 1/4 (32)
MAX 2 1/4 (57) 2 1/4 (57)
08 (205)
2 1/2 (64)
1 1/2 (38)
2 1/2 (64)
B DIA
H
X MIN
MAX
Specify Type, Size & Finish
eg: G08PB
SUFFIX -G
05 (125) 06 (150)
2 (51)
2 (51)
1 1/4 (32) 1 1/4 (32)
2 1/4 (57) 2 1/4 (57)
FUNCTION: Used in finished floors where
some light wheeled traffic is anticipated.
TD
07 (180)
2 1/4 (57)
1 1/4 (32)
2 1/4 (57)
VARIATIONS:
Flapper Type Backwater Valve(Specify
Suffix -KV)
Sediment Bucket -B
Vandal Proof
Screws -U
08 (205)
2 1/2 (64)
1 1/2 (38)
2 1/2 (64)
3(76)
Specify Type, Size & Finish
eg: H05CP
SUFFIX -H
REINFORCED SQUARE
STRAINER
MATERIALS:
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
SPANNER WRENCH COVER
SOLID HINGED COVER
FUNCTION: Used in finished floors where
light wheeled loads and or heavy foot traffic
are anticipated.
MATERIALS:
VARIATIONS:
Chrome Plated -CP
Sediment Bucket -B
Polished Bronze -PB
Vandal Proof
Nickel Bronze -NB
Screws -U
FUNCTION: Shower room drain set at wall and
floor junction. Vertical grate openings prevent
drain stoppage should flat surface become
covered.
MATERIALS:
Cast Iron -CI
D
Chrome Plated -CP
B
Polished Bronze -PB
C
Nickel Bronze -NB
22 1/2
1/2(64)
VARIATIONS:
Vandal Proof Screws -U
2010 SERIES OPTIONAL
STRAINER HEADS
FIGURE
NUMBER
SUFFIX
L
M
N
P
R
T
B x B' 4 1/2(115)x8(205) 4(100)x12(305) 5(125)x9(230) 5(125)x13(330)6(150)x10(255) 5(125)x17(430)
H
2 1/4 (57)
2 1/2 (64)
2 1/4 (57)
3 (76)
2 1/4 (57)
3 (76)
1 3/8 (35)
1 7/8 (48)
1 3/8 (35)
2 1/8 (54)
1 3/8 (35)
2 1/4 (57)
X MIN
MAX
2 3/8 (60)
2 3/4 (70)
2 3/8 (60)
3 (76)
2 3/8 (60)
3 1/8 (79)
Specify Type, Size & Finish
eg: K07CP
SUFFIX -K
4 1/2
4(115)
1/2
MATERIALS:
Cast Bronze -CB
Galvanized Cast
Iron -G
A
6 6(150)
22 (51)
SUFFIX
NOTE: Extension can be stacked for increased
maximum adjustment.
-Y
-Z
4 (100) DIA
REV.
DATE
MAX
2 1/8 (54)
2 1/8 (54)
Specify Type, Size & Finish
eg: YCP, ZCP
2 1/2
(64)
DESCRIPTION
NOTE: Dimensions shown in parenthesis are in millimeters.
Specify Type, Size & Finish
eg: VPB, WNB
SUFFIX
-V -W
MATERIALS:
Polished Bronze -PB
Rough Bronze -RB
Nickel Bronze -NB
6
6 (150)
3/16 (56)
22 3/16
SUFFIX -69
TBW
CMD
TBW
EMB
BY
BS
BS
BS
BS
CKD. BY
5 x 2 1/2
(125) x (64)
VARIATIONS:
Flapper Type Backwater Valve(Specify
Suffix -69V)
Sediment Bucket -B
Vandal Proof
Screws -U
eg: A06NB-69
8 1/4 x 3 1/4 Oval
(210) x (83)
1 (25)
Fig. 3590
2 1/2
(64)
Revised
Revised Tables
T Strainer was S Strainer
Added Nickel Bronze
Chg'd Func of Suffix -V -W
B
C
D
X
MAX
MIN
3 1/2 (89) 3 1/2 (89) 4 1/2 (115) 1 5/8 (41) 2 5/8(67)
6 3/4 (170) 6 3/4 (170) 6 1/2 (165) 1 5/8 (41) 2 5/8(67)
6 x 2 1/2 Oval
(150) x (64)
4 1/4 (110)
Fig. 3581
8-24-99
6-11-99
1-22-99
11-4-97
10-28-96
X
Chrome Plated -CP
Nickel Bronze -NB
Polished Bronze -PB
VARIATIONS:
Less Dome -LD
Standpipe Height
other than 6" (150)
(Specify Height)
6 DIA (150)
4 1/4 (110)
H
G
F
E
D
MIN
3/4 (19)
3/4 (19)
SUFFIX -Y-Z
SUFFIX -X
Fig. 3580
A
SIZE
2 (51)
3 (76)
-V
-W
FUNCTION: Used in finished floors where light
wheeled loads and or heavy foot traffic are
anticipated.
FUNCTION: Used as overflow drain in
decorative pools, fish ponds or similar areas.
Dome prevents floating objects from entering
drain line.
MATERIALS:
REGULARLY
FURNISHED:
Duco Cast Iron -CI
SUFFIX
HEAVY DUTY ADJUSTABLE
OVERFLOW WITH STANDPIPE
FUNCTION: Used when a strainer head must
be raised to accommodate deeper floor fill.
MIN
2 1/2
1/2 (64)
MIN 2
MAX 3 3/4
MAX
3 3/4 (95)
Specify Type,Size & Finish
eg: LNB
SUFFIX
-L-M-N-P-R-T
EXTENSION ADAPTOR
3 3/4 - 12
3(95)
3/4 - 12
Specify Type, Size & Finish
eg: J06NB
SUFFIX -J
ANGLE STRAINER
B x B'
B SQ 05 (125) 06 (150) 07 (180) 08 (205)
H
2 (51)
2 (51)
2 1/4 (57) 2 1/2 (64)
MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38)
X MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64)
2 (51) 3 (76)
RECTANGULAR STRAINER
H
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
DRAWING NUMBER
A
SIZE
NONE
SCALE
5-17-85
DATE:
G
IN
I
ve
nti N E E R Cu
n
on R
ather Tha
H
TD
APPROVED BY:
MEMBER OF:
OPTIONAL STRAINER HEADS
B
PJ
CHECKED BY:
®
P
DRAWN BY:
ASPE
NITARY
SA
®
EN e
r
CUSTOMER
DRIVEN
MEMBER OF ACORN’S FAMILY OF COMPANIES
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
H
SMITH MFG. CO.
®
re
SMITH ® JAY R.
Fig. 3591
4 1/2
(115)
5 x 2 1/2
(125) x (64)
FIGURE NUMBER
2010 SERIES OPTIONAL
STRAINER HEADS
2 of 2
FS-1
A
SJM
WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA
S3410
DRAWING NUMBER
SIZE
NONE
SCALE:
9-19-85
DATE:
APPROVED BY:
MEMBER OF:
G
IN
I
ve
nti N E E R Cu
n
on R
ather Tha
SANI-CEPTOR® ACID RESISTANT COATED
FLOOR & INDIRECT WASTE DRAINS
A.R. COATED NON-TRAFFIC TOPS
8" (205) SQUARE TOP - MEDIUM RECEPTORS
FUNCTION: Used in kitchens, hospitals, food markets, restaurants, schools and all types of food handling areas not subject
to foot or other traffic where the ultimate in sanitation is desirable and a medium capacity receptor is required.
Free Area
11 SQ IN
(71) SQ CM
10 (255) SQ
8 (205) SQ
2 (51)
10 (255) SQ
8 (205) SQ
2 (51)
6 (150)
6 (150)
3 (76)
3 (76)
A (Pipe Size) = 02(50), 03(75) or 04(100)
A
A
WITH DOME BOTTOM STRAINER
WITH SEDIMENT BUCKET
Fig. 3410C . . . . . . . . . . CAULK OUTLET . . . . . . . . . . Fig. 3411C
Fig. 3410Y . . . . . . . . . NO-HUB OUTLET . . . . . . . . . . Fig. 3411Y
FEATURES, OPTIONS & ORDERING INFORMATION
3410, 3411
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
JD
CHECKED BY:
VGD
DRAWN BY:
FIGURE
NUMBER
®
NITARY
SA
®
P
SINCE 1926
ASPE
MEMBER OF MORRIS GROUP INTERNATIONAL™
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
EN e
r
CUSTOMER
DRIVEN
LOCATION
G
K
SMITH MFG. CO.
®
re
SMITH ® JAY R.
REGULARLY FURNISHED: Cast Iron Flanged Receptor with Seepage Holes, Acid Resistant Coated Interior, and Loose Set
Acid Resistant Coated Cast Iron Grate. Aluminum Dome Bottom Strainer or White ABS Sediment Bucket as Indicated by
Figure Number.
OPTIONAL MATERIALS:
VARIATIONS:
All Duco Cast Iron Receptor and Grate -CI
Aluminum Flat Bottom Strainer -FBS
All Galvanized Receptor and Grate -G
Flashing Clamp -C
Less Flange (Specify Fig. 3415, 3416)
Polished Aluminum Dome Bottom Strainer -PDBS
NOTE: This grate is not recommended for
L Speedi-Set Service Weight
any type of traffic including pedestrian traffic.
LXH Speedi-Set Extra Heavy
NOTE: Dimensions shown in
parentheses are in millimeters.
OPTIONAL TOP GRATES AND COVERS FOR INDIRECT WASTE APPLICATIONS
SUFFIX
NUMBER
DESCRIPTION
-10 . . . . . . . . . . Less A.R.C. Grate
-12 . . . . . . . . . . With A.R.C. 1/2 Grate
-13 . . . . . . . . . . With A.R.C. 3/4 Grate
-14 . . . . . . . . . . With A.R.C. Grate with 2 1/2" (64) DIA Center Hole
-15 . . . . . . . . . . With NB Rim and Aluminum Recessed Grate
-21 . . . . . . . . . . With A.R.C. Grate and 4" (100) DIA A.R.C. Funnel
-22 . . . . . . . . . . With A.R.C. Grate and 6" (150) DIA A.R.C. Funnel
-25 . . . . . . . . . . With A.R.C. Grate and 8 1/4(210) x 3 1/4(83) x 4 1/2"(115) High Oval A.R.C. Funnel
-26 . . . . . . . . . . With A.R.C. Grate and 6(150) x 2 1/2(64) x 1"(25) High Oval A.R.C. Funnel
-41 . . . . . . . . . . With A.R.C. Solid Cover
-42 . . . . . . . . . . With A.R.C. 1/2 Solid Cover
-44 . . . . . . . . . . With A.R.C. Solid Cover with 2 1/2" (64) DIA Center Hole
K
J
H
G
REV.
8-4-14
6-10-14
01/20/11
12-3-98
DATE
Revised Variations
Revised Reg. Furn., Var.
Updated Logo
Added Note
DESCRIPTION
TBW
TBW
JJ
CMD
BY
CL
TWK
TW
CL
CKD. BY
WEIGHT
POUNDS
VOLUME
CUBIC FEET
FIGURE NUMBER
3410, 3411