Attached are page(s) from the 2011 Hilti North
American Product Technical Guide. For
complete details on this product, including data
development, product specifications, general
suitability, installation, corrosion, and spacing &
edge distance guidelines, please refer to the
Technical Guide, or contact Hilti.
H ilt i, I nc .
5400 South 122 n d East Avenue
Tulsa, OK 74146
1-800-879-8000
www.hilti.com
General Construction Fastening Systems
3.2.4 Perimeter Wall Application Fasteners
3.2.4.1
ApplicationDescription
3.2.4.1 Application Description
3.2.4.2
ProductDescription
3.2.4.3
MaterialSpeci cations
3.2.4.4
TechnicalData
3.2.4.5
Ordering Information
Perimeter wall applications as part
ofcurtainwallsandbypassballoon
framing are common in steel and metal
framedstructures.Lightgaugesteel
framing and track encompass the
outsideperimeterofthebuilding.
Steeltrackisfasteneddirectlyorwith
other cold-formed steel components
tosteelframingmembersortoconcrete
slabedges.
Perimeter Wall Track Applications
De ection Slip Clip Connections
X-U
X-U15
DS
EDS
Listings/Approvals
ICC-ES (International Code Council)
ESR-2269(X-U&X-U15)
ESR-1663(DS,EDS)
COLA (City of Los Angeles)
RR25675(X-U&X-U15)
RR25646(DS,EDS)
3.2.4.2 Product Description
X-U
DS/EDS
TheHiltiX-UUniversalKnurled
ShankFastenerisdesignedasa
highperformancesolutiontosimplify
powder-actuated fastener selection.
TheX-Uisonefastenertypethat
performsequallywellonbothhighand
standard strength concrete and steel.
RefertoSection3.2.3foradditional
informationontheX-UUniversal
KnurledShankFastener.
TheDSseriesfastenerisahigh
performance fastener of 0.177" shank
diametersuitableforbothconcrete
and steel applications. It is offered in
asinglefastenerversiononlywitha
10 mm dome head design and a 10 mm
guidancewasher.Availablelengths
are 1" through 4-5/8".EDSfasteners
have knurled shanks intended for
usewithsteelbasematerialsandare
availableinlengthsof3/4" and 7/8".
TheDS/EDSfastenersareintended
onlyforcaseswherea0.177"diameter
shankspeci cationisrequired.
X-U 15
TheX-U15isahighperformance
fastenerdesignedspeci callyfor
attachments to steel. It is offered in a
0.145" shank diameter and 5/8" length.
3.2.4.3 Material Speci cations
Fastener
Designation
X-UUniversalKnurledShankFastener&X-U15
DS/EDSHeavyDutyFasteners
Fastener
Material
CarbonSteel
CarbonSteel
Fastener
Plating
5 µm Zinc1
5 µm Zinc1
1 ASTMB633,SC1,TypeIII.
36 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.caIDirectFasteningTechnicalGuide2011
General Construction Fastening Systems
Perimeter Wall Application Fasteners 3.2.4
3.2.4.4 Technical Data
Perimeter Wall Track Applications
2-1/4"
2-1/4"
3"
3-5/8"
3-5/8"
Figure1:3-5/8"Track-1Fastener
Figure2:3-5/8"Track-2Fasteners
2-1/4"
2-1/4"
6"
4-1/2"
6"
Figure3:6"Track-1Fastener
Figure4:6"Track-2Fasteners
Allowable Shear Loads for Attachment of Perimeter Track to 4000 psi Normal Weight Concrete 1,2,3,4,5,6
Fastener
Description
Fastener
Shank Diameter
in. (mm)
Fastener Length
in. (mm)
Track
Width in.7
3-5/8
1
Universal
KnurledShank
Fasteners
(27)
6
X-U
0.157
(4.0)
3-5/8
1-1/4
(32)
6
3-5/8
1
HeavyDuty
Fasteners
(27)
6
DS
0.177
(4.5)
3-5/8
1-1/4
(32)
6
Number of
Fasteners
1
Shear
lb(kN)
225
(1.00)
2
450
(2.00)
1
225
(1.00)
2
450
(2.00)
1
275
2
(1.22)
–
1
275
(1.22)
2
620
(2.76)
1
240
(1.07)
2
410
(1.82)
1
240
(1.07)
2
480
(2.14)
1
350
2
1
2
(1.56)
–
350
(1.56)
–
1 Allowableloadsweredevelopedfromtestingthelow-velocityfastenerswith16gauge(Fy 33ksi)steeltrack.Asafetyfactorgreaterthanorequalto5.0was
usedinaccordancewithICC-ESAC70.Steeltrackmembersnotmeetingthespeci cationnotedmustbeinvestigatedinaccordancewithaccepteddesigncriteria.
2 Allowablevaluesareforfastenersinstalledinconcretehavingthedesignatedcompressivestrengthatthetimeofinstallation.
3 SpacingandedgedistanceconstraintsareasnotedinFigure1-4atthetopofthispage.
4 Allowableshearloadvaluesareforloadsappliedperpendiculartotheedgeoftheconcrete.
5 Multiplefastenersarerecommendedforanyattachment.
6 Minimum edge distance of 2-1/4"cannotbedecreased.Closeredgedistancescanresultinedgebreakoutfailureofthebasematerialduringinstallation.Asa
result, fasteners are offset from the center line of the track.
7 SSMA track designation for 3-5/8" track is 362T 150-54 and for 6" track is 600T 150-54.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.caIDirectFasteningTechnicalGuide2011 37
General Construction Fastening Systems
3.2.4 Perimeter Wall Application Fasteners
A ! A""#$%" ! &'$" (#) " *'%'$+$ !,c = 3000 psi Lightweight Concrete 1,2,3,4,5,6
Fastener
Description
Fastener
Shank Diameter
in. (mm)
Fastener Length
in. (mm)
Track
Width in.7
3-5/8
1
(27)
6
Universal
K123456 7891.
F9:;5153:
3-5/8
0.157
(4.0)
X<=
1-1/4
(32)
6
3-5/8
1-1/2
(37)
6
3-5/8
1
(27)
6
Heavy Duty
3-5/8
0.177
(4.5)
DS
F9:;5153:
1-1/4
(32)
6
3-5/8
1-1/2
(37)
6
1
2
3
4
5
6
7
Number of
Fasteners
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Shear
lb -./0
260 (1.16)
490 (2.18)
260 (1.16)
520 (2.31)
350 (1.56)
465 (2.07)
350 (1.56)
720 (3.20)
295 (1.31)
465 (2.07)
295 (1.31)
755 (3.36)
205 (0.91)
395 (1.76)
205 (0.91)
720 (3.20)
225 (1.00)
370 (1.65)
225 (1.00)
595 (2.65)
215 (0.96)
370 (1.65)
215 (0.96)
590 (2.62)
>??@BCD?E ?@CGH BEIe developed fr@o JEHJLMN JOE ?@BPQE?@RLJS TCHJEMEIH BLJO UV NCWNE YZy ≥ 33 ksi) steel track. A safety factor greater than or equal to
5.0 was used in accordance with ICC-ES AC70. Steel members not meeting the speciication noted must be investigated in accordance with accepted
design criteria.
>??@BCD?E QC?WEH CIe for fasteners installed in concrete having the designated compressive strength at the time of installation.
Spacing and edge distance constraints arE CH M@JEG LM ZLNWIes 1-4 at the top of the previous page.
>??@BCD?E HOECI ?@CG QC?WEH CIe for loads applied perpendicular to the edge of the concrete.
Multiple fasteners are recommended for any attachment.
Minimum edge distance of 2-1/[\ RCMM@J DE GERIeased. Closer edge distances can rEHW?J LM EGNE DIeakout failurE @T JOE DCHE oCJEILC? during installation. As a
result, fasteners are offset from the center line of the track.
SSMA track designation for 3-5/8" track is 362T 150-54 and for 6" track is 600T 150-54.
≥1/2"
≥
≥
≥
≥1"
]^_`ab cd
3-5/8" or 6" Track e ]fghbiba
≥1/2"
]^_`ab jd
3-5/8" or 6" Track k ]fghbibag
Allowable Shear Loads for Attachment of Perimeter Track to Minimum ASTM A 36 (Fy ≥ 36 ksi; Fu ≥ 58 ksi) Steel, lb lmnp1,2,3,4
Fastener
Description
Fastener
Shank
Diameter
in. (mm)
Universal
X<=
0.157
(4.0)
X<= qr
0.145
(3.7)
EDS
0.177
(4.5)
K123456 7891.
F9:;5153:
Heavy Duty
F9:;5153:
1
Number of
Fasteners
1
2
1
2
1
2
Steel Thickness (in.)
3/16
720
1440
395
800
665
1330
(3.20)
(6.40)
(1.76)
(3.56)
(2.96)
(5.92)
1/4
720
1440
395
790
935
1870
3/8
(3.20)
(6.40)
(1.76)
(3.51)
(4.16)
(8.32)
720
1440
450
900
970
1940
≥3/45
1/2
(3.20)
(6.40)
(2.00)
(4.00)
(4.31)
(8.62)
720
1440
5006
10006
995
1990
(3.20)
(6.40)
(2.22)
(4.45)
(4.43)
(8.86)
375
750
4006
8006
655
1310
(1.67)
(3.34)
(1.78)
(3.56)
(2.91)
(5.82)
sOE JCDW?CJEG C??@BCD?E ?@CG QC?WEH CIe for the low-velocity fasteners only, using a safety factor that is grECJEI JOCM @I EtWC? J@ uvwx RC?RW?CJEG LM CRR@Idance with
yzzP{| >z}wv |JEE? oEoDEIH R@MMERJEG J@ JOE HWDHJICJE oWHJ DE LMQEHJLNCJEG LM CRR@Idance with accepted design criteria.
~@BPQE?@RLJS TCHJEMEIH HOC?? DE GILQEM J@ BOEIE JOE @LMJ @T JOE TCHJEMEI EMEJICJEH JOE HJEE? DCHE oCJEILC?x E€REJ CH M@JEGv
Multiple fasteners are recommended for increased rE?LCDL?LJS.
2
3
4 The minimum edge distance for fastening into steel is 1/2". Minimum spacing for fastening into steel without reduction in performance is 1".
5 Unless otherwise noted, tabulated allowable load values provided for ≥3/4" steel arE DCHEG W@M oLMLoWo @LMJ EMEJICJL@M @T U/2". If 1/2" point penetration is not
CROLEQEGx DWJ C @LMJ EMEJICJL@M @T CJ ?ECHJ /‚\ LH @DJCLMEGx JOE JCDW?CJEG HOECI ?@CG HO@W?G DE IEGWREG DS ‚ EIcent.
6 Based upon minimum point penetration of 15/32".
38 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca
General Construction Fastening Systems
Perimeter Wall Application Fasteners 3.2.4
De ection Slip Clip Connections
Figure7:
NormalWeightConcrete
Figure8:
LightweightConcretewithPourStop
Allowable Loads for Attachment of Cold-Formed Steel De ection Slip Clips with X-U Universal
Powder-Actuated Fasteners 3,4,5,6,7,8,9
Clip Type
Fastener
Number of
Fasteners
2
VerticlipSLB600
ƒ„… †‡ˆ‰
X-U27
3
4
2
WSC 950
ƒ„Š †‡ˆ‰
X-U27
3
4
WSC 1500
ƒ„‹ †‡ˆ‰
FCSC
ƒ„… †‡ˆ‰
2
X-U27
3
2
X-U27
3
Normal Weight
Concrete
Allowable Load 1
lb (kN)
Lightweight Concrete
with Pour Stop
Allowable Load 2
lb (kN)
160
(0.71)
245
(1.09)
330
(1.47)
125
(0.56)
145
(0.64)
220
(0.98)
90
(0.40)
185
(0.82)
140
(0.62)
290
(1.29)
160
(0.71)
245
(1.09)
380
(1.69)
155
(0.69)
275
(1.22)
275
(1.22)
130
(0.58)
235
(1.05)
170
(0.76)
320
(1.42)
Location of
Fasteners
1 Allowableloadbasedonasafetyfactorof5.0indirectionshowninFigure7aboveforattachmentofde ectionslipclipto4000psiNormalWeightConcreteSlab.
2 Allowableloadbasedonasafetyfactorof5.0indirectionshowninFigure8aboveforattachmentofde ectionslipclipto3000psiLightweightConcreteSlabwith
12GA.sheetsteelpourstopwithminimumyieldstrength(Fy) of 33 ksi.
3 Testingbasedonde ectionslipclipsobtainedinFebruary2007.Subsequentchangesbythemanufacturertothede ectionslipclipdesignmayaffectloadvalues.
4 Allowableloadvaluesareforfastenersinstalledinconcretehavingthedesignatedcompressivestrengthatthetimeofinstallation.
5 Allowableloadvaluesarebasedoffofthe xturestested.Othermembersconnectedtothede ectionslipclipsmustbeinvestigatedinaccordancewithaccepted
design criteria.
6 Spacingoffastenersaresubsequenttothedesignofeachde ectionslipclipandthelocationofanypre-drilledholes.
7 Foredgedistanceandbasematerialthicknessrequirements,referenceSection3.2.1.1.4.
8 Allowablevaluesareforloadsappliedperpendiculartotheedgeoftheconcrete.
9 Multiplefastenersarerecommendedforanyattachment.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.caIDirectFasteningTechnicalGuide2011 39
General Construction Fastening Systems
3.2.4 Perimeter Wall Application Fasteners
¡¢£¤¥¦ § ¨ ©ª¦¦«
Allowable Loads for Attachment of Cold-Formed Steel De ection Slip Clips with X-U Universal Powder-Actuated
Fasteners to Minimum ASTM A36 (Fy 36 ksi; Fu 58 ksi) Steel 1,2,3,4,5,6,7,8
Clip Type
Number of
Fasteners
Fastener
Allowable Load
lb ¬­®¯
740
(3.29)
1490
(6.63)
2115
(9.41)
510
(2.27)
610
(2.71)
870
(3.87)
970
(4.31)
1105
(4.92)
1300
(5.78)
715
(3.18)
940
(4.18)
1055
(4.69)
2
Verticlip SLB600
X-U 16
3
°±² ³´µ¶
4
2
WSC 950
X-U 16
3
°±· ³´µ¶
4
2
WSC 1500
X-U 16
3
°±¸ ³´µ¶
4
2
¹º»º
X-U 16
Location of
Fasteners
3
°±² ³´µ¶
4
1 AllowableloadbasedonavariablesafetyfactorinaccordancewithSectionFofAISI-NorthAmericanSpeci cationfortheDesignofColdFormedSteel
Structural Members, 2007 Edition.
2 Testingbasedonde ectionslipclipsdevelopedinFebruary2007.Subsequentchangesbythede ectionslipclipmanufacturertotheclipdesignmayaffect
load values.
3 Allowableloadvaluesarebasedoffoftheconnectionstested.Steelmembersconnectedtothede ectionslipclipsmustbeinvestigatedinaccordancewith
accepted design criteria.
4 Spacingofthefastenersdependsonthespeci cde ectionslipclipandlocationofpre-drilledholesinthede ectionslipclip.
5 ForedgedistanceandbasematerialthicknessrequirementsreferenceSection3.2.1.2.2.
6 Allowable load values are for loads applied perpendicular to the edge of the base steel member.
7 Multiple fasteners are recommended for any attachment.
8 Allowable load values are based off of testing into 1/4" ASTM A36 structural steel.
3.2.4.5 Ordering Information
Fastener
Description
Shank Length
in. (mm)
Shank Ø
in. (mm)
Washer Ø
Packaging Qty
X-U 16 P8TH
X-U 19 P8TH
X-U 27 P8TH
X-U 32
X-U 15
EDS 19 P10
EDS 22 P10
DS 27 P10
DS 32 P10
5/8 (16)
3/4 (19)
1 (27)
1-1/4 (32)
5/8 (16)
3/4 (19)
7/8 (22)
1 (27)
1-1/4 (32)
0.157 (4.0)
0.157 (4.0)
0.157 (4.0)
0.157 (4.0)
0.145 (3.7)
0.177 (4.0)
0.177 (4.0)
0.177 (4.0)
0.177 (4.0)
Plastic 8 mm “tophat” or collated
Plastic 8 mm “tophat” or collated
Plastic 8 mm “tophat” or collated
Plastic 8 mm “tophat” or collated
Plastic 8 mm “tophat” or collated
Plastic 10 mm
Plastic 10 mm
Plastic 10 mm
Plastic 10 mm
100 pcs / box
100 pcs / box
100 pcs / box
100 pcs / box
100 pcs / box
100 pcs / box
100 pcs / box
100 pcs / box
100 pcs / box
40 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca
Œ
Ž‘’ “”•’–Ž–— ˜‘™–Ž‘”š ›œŽ žŸ