Reference Guide for Conduit Bodies and Covers
Time-tested, innovative Condulet® conduit fittings from Cooper Crouse-Hinds move power where you need it simply and safely in any electrical
installation. Over one hundred years after the introduction of the Condulet, Cooper Crouse-Hinds Condulets perform to the highest standard of
safety and reliability, and remain the leader in conduit outlet bodies today.
INDUSTRIAL
COMMERCIAL
Form 7 Condulets
Form 8 Condulets
Mark 9 Condulets
Form 5 Condulets
Series 5 Condulets
• Bodies made of Feraloy (Iron) or aluminum;
Corro-free™ epoxy powder coat available
• Bodies made of Feraloy (Iron) only
• Bodies made of Aluminum only
• Durable malleable iron construction
• Flat back provides more interior cubic
capacity; built-in screw holes for covers
• Flat back provides more interior cubic capacity;
built-in screw holes for covers
• Interchangeable with Appleton Form 35 and
O-Z/Gedney® malleable iron offering
• Corrosive-resistant copper-free
aluminum construction
• Larger conduit bodies allow for wider
conductors for installation in industrial
environment conduit systems
• Larger conduit bodies allow for wider
conductors for installation in industrial
environment conduit systems
• Built-in rollers on 1-1/4" to 4" on C and LB bodies
to facilitate wire pulling
• Tapered threads allow superior grounding
continuity throughout conduit system; integral
bushing allows for wire protection and smooth
pulling surface
• Tapered threads allow superior grounding
continuity throughout conduit system; integral
bushing allows for wire protection and smooth
pulling surface
• Available in styles: C, LB, LL, LR, T, TB and X
• Available in styles: C, LB, LL, LR, T, TB and X
Choice of covers to meet customer
applications need & preference.
Choice of covers to meet customer
applications need & preference.
Choice of covers to meet customer
applications need & preference.
Choice of covers to meet customer
applications need & preference.
Choice of covers to meet customer
applications need & preference.
• Wedgenut and Wedgenut with integral gasket
cover available in steel (zinc plated); Wedgenut
design facilitates installation and removal
(Nuts are held captive inside cover).
• Two cover screws are provided for tight cover
and gasket assembly.
• Self-retaining cover screws
• Sheet steel cover with stainless screws
• Sheet aluminum cover with stainless screws
• Cover, and cover with integral gasket in aluminum
• Cast malleable iron cover with stainless screws
• Neoprene gaskets available
• Sheet steel cover with integral gasket cover
with stainless screws
• Sheet aluminum cover with integral gasket
and stainless screws
• Round back body shape for ease of use
with conduit shape
• Exclusive Snaptight™ and Wedgenut cover
available
• For neat, compact installations in industrial
environment conduit systems
• Tapered threads allow superior grounding
continuity throughout conduit system; integral
bushing allows for wire protection and smooth
pulling surface
TM
®
• Available in styles: C, LB, LL, LR, T, TB and X
• Interchangeable with other manufacturers
die cast offering
• Available with threaded hubs for use with
Rigid/IMC or as combination body with
threaded hubs and set-screws for Rigid/IMC
or EMT conduit
• Available in styles: C, LB, LL, LR and T
• Available in styles: C, E, L, LB, LL, LR, T,
TA, TB and X
• Wedgenut, and Wedgenut with integral gasket
covers available in steel (zinc plated)
• Snaptight cover in steel (zinc plated); Snaptight
design allows installation without the use of screws.
• Cover in Feraloy (Iron)
• Cover, and cover with integral gasket in aluminum
• Neoprene gaskets available
• Cover available with Corro-free™ epoxy coat
• Wedgenut, and Wedgenut with Integral gasket
covers in Feraloy (Iron)
• Wedgenut cover in cast aluminum
• Neoprene gaskets available
Form 7 Conduit Bodies
Round back bodies
made of Feraloy (Iron)
or aluminum
Trade
Size
C
1/2 - 3"
E
1/2 - 1"
L
1/2 - 2"
LB
1/2 - 4"
LL
1/2 - 4"
LR
1/2 - 4"
T
1/2 - 4"
TA
1/2 - 2"
TB
1/2 - 2"
X
1/2 - 2"
Note: Add suffix SA to part number for aluminum,
Add S752 for Corro-free epoxy coat
Form 8 Conduit Bodies
Wedgenut cover, sheet steel
1/2 - 4"
Snaptight cover, sheet steel
1/2 - 2"
Wedgenut cover with integral
gasket, sheet steel
Wedgenut cover with integral
gasket, sheet aluminum
Wedgenut cover, Feraloy
(Iron alloy)
Wedgenut cover with integral
gasket, Feraloy (Iron alloy)
Flat back bodies
in aluminum only
Trade
Size
Malleable Iron
Bodies
Trade
Size
C
1/2 - 3"
C
1/2 - 4"
LB
1/2 - 4"
LL
1/2 - 4"
C
1/2 - 4"
LR
1/2 - 4"
T
1/2 - 4"
LB
1/2 - 4"
LL
1/2 - 3"
LR
1/2 - 3"
T
1/2 - 3"
TB
1/2 - 2"
X
1/2 - 2"
1/2 - 4"
LL
1/2 - 4"
LR
1/2 - 4"
T
1/2 - 4"
TB
1/2 - 2"
X
1/2 - 1"
Note: Add suffix SA to part number for aluminum
Mark 9 Covers
Covers &
Gaskets
Trade
Size
Cover, sheet steel
1/2 - 4"
Covers &
Gaskets
Cover, sheet aluminum
Cover, sheet steel with
integral gasket
Cover, Feraloy (Iron Alloy)
Neoprene gaskets
1/2 - 4"
Neoprene gaskets
Form 7 SnapPack™
New! Packaged body and sheet steel
cover with integral gasket in all
configurations and sizes!
For more information visit www.crouse-hinds.com
Crouse-Hinds is a registered trademark of Cooper Industries, Inc.
© 2008 Cooper Industries, Inc.
1/2 - 2"
X
1/2 - 2"
Form 5 Covers
Trade
Size
1/2 - 2"
Covers &
Gaskets
Trade Size
Sheet Steel Cover
1/2 - 4"
Cover with integral gasket,
sheet aluminum
1/2 - 2"
Neoprene
Gasket
(perforated, for use with
above covers)
Neoprene gaskets
1/2 - 4"
NEW!
Sheet Steel Cover with
integral gasket
1/2 - 4"
1/2 - 4"
Die Cast
Aluminum
Threaded
Trade
Size
Threaded &
Set Screw Trade
Size
LB
1/2 - 4"
1/2 - 2"
(2-1/4 - 4" set screw
only)
LL
1/2 - 4"
1/2 - 2"
C
1/2 - 4"
1/2 - 2"
LR
1/2 - 4"
1/2 - 2"
T
1/2 - 4"
1/2 - 2"
Series 5 Covers
1/2 - 4"
1/2 - 2"
1/2 - 4"
TB
Cast Iron Cover
1/2 - 4"
Wedgenut cover, cast aluminum
4920-0208
LB
1/2 - 2"
1/2 - 2"
Series 5 Bodies
Trade
Size
Form 8 Covers
Trade Size
Form 5 Bodies
Flat back bodies
made of Feraloy
(Iron) only
Form 7 Covers
Covers &
Gaskets
Mark 9 Conduit Bodies
Covers &
Gaskets
Trade
Size
Sheet Aluminum Cover
1/2 - 4"
Neoprene
Gasket
(perforated, for use with
above covers
1/2 - 4"
NEW!
Sheet Aluminum Cover with
integral gasket
1/2 - 4"
1/2 - 4"
1/2 - 4"
1/2 - 4"
Form 5 SnapPack™
New! Packaged body and sheet steel
cover with integral gasket in all
configurations and sizes!
Series 5 SnapPack™
Packaged body, neoprene gasket and sheet
aluminum cover in all configurations
and sizes!