Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
VARIOSUB D-SU B
Contact Inserts and Carriers
Description
D-Sub 9 contact inserts, with PCB an d
9 x MPT 0 .5 screw connections
The male and female inserts in D-SUB 9
and D-SUB 15 format enable 9 or 15 data
lines and the cable shield to be connected .
Industrial connectors are available for th e
sleeve housing and mounting sides . These
connectors are made with a scre w
connection, for soldering onto printed circuit
boards, with U-grooves, with a flat-ribbo n
cable connection and for crimp contacts .
Special features :
— Screw connection for data lines up t o
0 .5 mm 2 conductor cross section ,
—male connector with spring-fit shiel d
contacting ,
—solid male contacts ,
—female contacts with two independen t
spring zones ensure low insertion forces ,
—tight contacts ,
—can be plugged onto all D-SUB plu g
connectors with the same number o f
positions,
—contact inserts with holes in the mountin g
ears are suitable for mounting in sleeve
and panel mounting frames ,
—contact inserts with threads in th e
mounting ears are suitable for especiall y
easy mounting in panel mounting frames .
120
Phoenix Contact
D-Sub 15 contact inserts, with PCB and
15 x MPT 0 .5 screw connections
D-Sub 9 contact inserts, solder connection ,
9-pos., with straight U-grooves, with hole
D-Sub 15 contact inserts, solder connection ,
15-pos ., with straight U-grooves, with hole
D-Sub 9 contact inserts, solder connection ,
9-pos ., with angled solder pins, with thread
D-Sub 15 contact inserts, solder connection ,
15-pos ., with angled solder pins, with thread
D-Sub 9 contact inserts, flat-ribbon cabl e
connection, 9-pos., with holes
D-Sub 15 contact inserts, flat-ribbon cable
connection, 15-pos ., with holes
D-Sub 9 contact carriers, crimp contact carriers ,
9-pos, with thread
D-Sub 15 contact carriers, crimp contact carriers ,
15-pos., with thread
D-Sub 9 contact carriers, crimp contact carriers ,
9-pos., with hole s
D-Sub 15 contact carriers, crimp contact carriers ,
15-pos ., with holes
Technical data
Mechanical data
Insertion force per signal contact
Extraction force per signal contact
Insertion/withdrawal cycle s
Material and surface s
Insulating bod y
Contact material
Contact surface
Electrical data
Max . amperage
Operating voltag e
Connection capacity solid / strande d
Contact resistance per contact pai r
Insulation resistanc e
Temperature range
Type of
contact
Type
male
female
VS-09-ST-DSUB/9-MPT-0, 5
VS-09-BU-DSUB/9-MPT-0,5
male
female
VS-15-ST-DSUB/15-MPT-0,5
VS-15-BU-DSUB/15-MPT-0, 5
male
female
mal e
female
mal e
femal e
mal e
femal e
mal e
femal e
mal e
femal e
mal e
femal e
male
female
male
female
male
female
[N ]
[N ]
<_ 3 .3
<_ 2 .2
200
PBTP
CU alloy
Ni/Au
[A]
[V]
[m m 5] / AWG
[m62]
[MN]
[°C]
1
63
0 .14-0 .50/26-20
<_ 2. 5
5000
-20 to +7 0
VS-. ..-DSUB-E . . .
VS- . ..-DSUB-F K
VS- .. .-DSUB-CD- . ..
Solder connection
Flat-ribbon cable connection
Crimp connection
S-15-ST-OSUB-EG
S•15-BU-DSUB-EG
Type
Order No.
Pcs.
Pkt .
VS-09-ST-DSUB-F K
VS-09-BU-DSUB-F K
16 88 81 6
168882 9
10
VS-15-ST-DSUB-F K
VS-15-BU-DSUB-FK
1688890
1688900
10
Pcs .
Pkt .
Type
Order No.
VS-09-ST-DSUB-CD-G
VS-09-BU-DSUB-CD-G
1688832
168884 5
10
VS-15-ST-DSUB-CD-G
VS-15-BU-DSUB-CD-G
1688913
16 88 92 6
10
VS-09-ST-DSUB-CD-B
VS-09-BU-DSUB-CD-B
1688858
16 88 86 1
10
VS-15-ST-DSUB-CD-B
VS-15-BU-DSUB-CD-B
1688939
168894 2
10
16 88 87 4
16 88 88 7
0
5
3 .3
5 2 .2
>_ 200
3.3
5 2 .2
0 200
3. 3
2. 2
0 200
PBTP
CU alloy
Ni/Au
PBTP
CU alloy
Ni/A u
PBT P
1
63
0 .14-0 .50/26-20
5 2 .5
2 5000
-55 to +125
1
63
1
63
5
—/—
<_ 2.5
2 5000
-55 to +125
5
—/
—
2 5000
-55 to +12 5
Note :
Crimp contact carriers are supplied without crimp contacts. Fo r
matching crimp contacts, please see page 126 .
Phoenix Contact
12 1