040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 57
EXTRUDED
ALUMINUM
Materials:
● Aluminum Alloy (6063 T-5)
ASTM Codes:
● ASTM C1063
● ASTM B244-97
● ASTM B136-84 (Color Anodizing)
● ASTM D4214-98 (Factory Paint)
● ASTM ND1730-67-TYPE B
(Chem-Film/Alodine coating)
● AA-M32-C10A21 (Clear Anodized)
● AAMA 605.2 (70% KYNAR
Baked-On Paint)
Note: Standard length is 10 feet.
Additional lengths available
upon request.
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 58
EXTRUDED ALUMINUM
Ordering
3/16” Return
Key
Knowing the names of the dimensions that comprise a vent, reveal or other
extruded aluminum trim can help greatly in selecting the specific product you need. Inside
x
When ordering, you may refer to the drawing shown to the right. Point-to-Point is
Ground
the distance from one point to another, and the “ground” (Outside Ground) is the
height of the point. These two dimensions are of primary concern when ordering.
y
7/8” Nail
Flange
Note: When factoring in the thickness
These product are manufactured in extruded aluminum. Custom shapes and radius
shapes are available as are factory finishes.
of the material, all PCS style trims
measure a full 7/8” thickness for
conventional 3 coat stucco.
Please note not all extruded aluminum items are available in stock in all size
combinations listed. Please call 1-87-Stockton to verify availability.
Radius Shapes
Reveal
(Curving is limited. Please consult factory for details)
Type of Curves
CAN BE
CURVED
Most of Stockton’s extruded aluminum shapes can be ordered curved. For tight radius requirement, certain shapes
have minimum curving ability based on the radius dimension and direction needed. Please consult us prior to ordering.
Due to the curving process, only 8 usable feet are available from a 10’ length. Please indicate the amount of material required in
usable feet. All material will be rounded up to a 10’ length. (As an example, 54 LF usable will be rounded up to 60 LF). Please
specify the point of radius (face of plaster, face of framing, center of reveal, etc.), as well as indicate the direction of the curve from
the diagrams on this page.
Note: The radius is pulled towards the arrow that appears on each diagram of the types of curves available.
Note: All the extruded moldings can be curved. However, there are limitations on the direction of the curve and the tightness of
the curve based on the profile/shape.
RADIUS – TYPE 1
RADIUS – TYPE 2
RADIUS – TYPE 3
RADIUS – TYPE 4
R
R
R
R
Arch
Reverse Arch
Outside Curve
Inside Curve
R
.............
R
............
Point of Measurement
Point of Measurement
Point of Measurement
R
Point of Measurement
R
R
R
Direction of Curve
Direction of Curve
Direction of Curve
Direction of Curve
Condition – Concave
Condition – Convex
Condition – Hardway
Condition – Hardway
Quick Hole Reference
Vent Holes/Slots: Are for air flow.
Weep Holes/Slots: Are for water/moisture release.
Key Holes/Slots: Are to give mud/stucco something to grab on to.
58
www.StocktonProducts.com
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 59
EXTRUDED ALUMINUM
Intersections
Factory fabricated mitered corners and intersections are available. Intersections are available in standard styles, which are shown on
this page. Custom shapes and designs are also available. The intersections are heli-arc welded. Six inch legs are standard. Longer
legs—up to two feet in length—are available. Different size reveal widths and shapes can be intersected. Moldings can be miter cut
and/or notched to meet special field conditions. Consult your Stockton sales representative for details.
“T”
“+” (plus)
“L”
“Outside Corner”
“Inside Corner”
Finishes
Clear Anodized
The standard finish for Stockton Plaster Moldings is Clear Anodized, Architectural 200R1. This is an electrochemical conversion
process that deposits an oxide film on the aluminum extrusion. The coating is extremely durable and resistant to most forms of
corrosion and the satin finish gives the molding an aesthetically pleasing appearance.
Specifications
Standard Finish: Architectural 200R1, medium etch (AA-M32C10A21)
Optional Finish: Class II 204R1, medium etch (AA-M32C10A31)
Fluorophore Paint (Kynar/Hylar)®
Kynar/Hylar is a 70% fluoropolymer resin based 2-coat baked on paint that is offered as an optional finish where high durability is
required and/or the moldings must match existing colors.
This premium finish is recommended for exterior applications where harsh conditions exist. It is extremely resistant to ultraviolet
color degradation and chalking. It is available in a wide variety of colors.
Note: Certain colors require a Kynar XL (with topcoat) given the exotic nature of the color. Please advise the factory of the
required color prior to job costing due to the fact that these colors require additional cost and minimum order quantities.
Specifications
Typical Finish meets or exceeds AAMA 605.2 Specification “Voluntary Specification for High Performance Organic on Architectural
Extrusion Panels.” Meets or exceeds a nominal dry film thickness of 1.2 mil. Kynar® is a Registered Trademark of Atochem North
America, Inc.
Color Anodized
The following color anodized finishes are available as special order items: Gold, Light Bronze, Medium Bronze, Dark Bronze and
Black. Color anodized finishes can vary from piece to piece. This is a characteristic of the anodizing process and should be taken
into account prior to placing an order. Typically, the color of the extrusions will fall within a certain range, and this range can be
established before anodizing. Check with factory for details.
Specifications
Color Anodized Finish: Integral colors to conform with designation 3AA-M112C22A32 of the Aluminum Association.
Alodine/Chem-Film
Alodine/Chem-film is a chemical conversion process that protects the aluminum extrusion until a primer coat can be applied in the
field. Chemical conversion should be specified for all extrusions to be field painted.
Specifications
Chemical Conversion Finish: Conforms with ASTM D 1730 Type B and MIL-C-5541A.
1-87-STOCKTON
www.StocktonProducts.com
59
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 60
EXTRUDED ALUMINUM
Fiber Cement Board Moldings
From Stockton Products™
Stockton Products™ now offers a complete line of
extruded aluminum moldings for use with 5/16"
Fiber Cement Board panels.
Construction using weather-resistant Fiber Cement Board
siding has become a popular choice among architects and
builders, particularly for extreme weather regions. Known
for its versatility, durability and performance, construction
using Fiber Cement Board is an excellent choice for all
types of commercial projects.
Stockton Products’ line of moldings gives you the ability
to enhance the aesthetic look of any Fiber Cement Board
project as well as providing a solution for any condition
and detail when using this style of construction.
Fearturing
• 6063 T5 extruded aluminum
• Standard finish clear anodized
• Other finishes available, contact factory
• 10’ cut length
• Factory curving available
• Factory fabricated intersections available
NEW
PJ-FCB
Page 71
Page 64
CR-FCB:
Channel Reveal
Page 68
F MOLD-FCB:
F Mold
Page 71
J MOLD-FCB:
J Mold
Page 77
SB-FCB:
Starter Base
60
Page 71
IC-FCB:
Inside Corner
Page 73
OC-FCB:
Outside Corner
Page 78
WS-FCB:
Weep Screed
Page 73
OCG-FCB:
Outside Corner Guard
ICR-FCB:
Inside Corner Reveal
Page 76
PJ-FCB:
Panel Joiner
Page 79
WHD-FCB:
Window Head Drip
www.StocktonProducts.com
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 61
EXTRUDED ALUMINUM
Ventilation
Many shapes are available vented to allow for air flow.
All vent slots are 1/8” wide by 1” long, spaced 1 1/2” on
center lengthwise. Multiple rows of vents are spaced laterally,
1/2” on center. Each lengthwise row of vent slots provides
approximately one square inch of venting per lineal foot.
Note: The “V” designation in model numbers indicates
vented ability.
Reveal
width
1/2”
3/4”
1”
1 1/2”
2”
3”
4”
6”
Note: not all extruded
aluminum items are
available vented in all
size combinations.
Please call 1-87-Stockton
to verify availability.
Can Be Curved
Vent
slots
1
1
1
2
3
5
5
10
Vent area per
lineal foot (appox.)
1” square
1” square
1” square
2” square
3” square
5” square
5” square
10” square
Percent of area
vented (appox.)
15.0%
12.5%
9.4%
12.5%
14.1%
14.3%
14.5%
20.8%
Page
NEW
Stockton
Products’
Extruded
Aluminum
CAN BE
CURVED
These products are designed
so that they can be curved for
installation. Gives you more
options to create arched
decorative reveals and more!
Curving is limited. Please consult factory.
A comprehensive line of
extruded aluminum products
for drywall, plaster and
stucco applications.
64
CR-FCB:
Channel Reveal
Page
Page
Page
Page
64
64
65
65
DCS:
Drywall Channel Screed
DCS 50-2: Drywall Channel
Screed 50-2 Piece
DMCT:
High Strength Corner Trim
DRM:
Wall Reveal
Page
Page
Page
Page
65
66
66
66
DRMB:
Reveal Base
1-87-STOCKTON
DRMF:
F Wall Reveal
DRML:
Edge Trim
www.StocktonProducts.com
DRMW:
W Corner Reveal
61
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 62
EXTRUDED ALUMINUM
Page
Page
Page
Page
67
67
67
68
DRMZ:
Z Wall Reveal
DRWT:
W Reveal
Page
Page
68
68
EES 75-100: Plaster Edge
Expansion Screed - 2 pc.
DS:
Drip Screed
NEW
Page
69
F MOLD-FCB:
F Mold
Page
69
70
70
71
NEW
IC-FCB:
Inside Corner
FPM:
F Plaster Molding
Page
71
NEW
FRWDM: Facia/Recessed
Window Drip Molding
Page
71
ICR-FCB:
Inside Corner Reveal
NEW
J MOLD-FCB:
J Mold
Page
Page
72
72
73
62
WINDOW
NVS:
Narrow V Screed
www.StocktonProducts.com
FCM:
Fascia Corner Molding
Page
WINDOW
70
Page
JPM:
J Plaster Molding
69
F-D 75-75:
F Drip Molding
Page
Page
Page
WINDOW
Page
FDM:
F Drywall Molding
DS300:
Drip Screed 3” Reveal
FRWM: Facia/Recessed
Window Molding
Page
72
JDM:
J Drywall Molding
NEW
OC-FCB:
Outside Corner
Page
73
NEW
OCG-FCB:
Outside Corner Guard
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 63
EXTRUDED ALUMINUM
Page
Page
73
74
PCM:
Plaster Corner Molding
Page
Page
74
PCS:
Plaster Channel Screed
74
PCS 50-25/25: Plaster
Channel Screed 50-25/25
PCS 75-2: Plaster Channel
Screed 75 - 2 pc.
Page
Page
Page
Page
75
75
75
76
PCS 75-25/25: Plaster
Channel Screed 75-25/25
PCS 75 Short V: Plaster
Channel Screed Short V
PCS 75 Wide V: Plaster
Channel Screed Wide V
PCS DA: Plaster Channel
Screed DA
Acoustical
Ceiling Tile
Page
NEW
76
PJ-FCB:
Panel Joiner
Page
Page
76
77
RWM:
W Reveal Molding
NEW
Page
77
SB-FCB:
Starter Base
SV:
Soffit Vent
Page
Page
Page
Page
77
78
78
78
TDM:
T Drywall Molding
TRM:
T Reveal Molding
Page
Page
79
79
WPM: Plaster Soffit
Reveal Molding
WHD-FCB:
Window Head Drip
1-87-STOCKTON
NEW
VSMV: Vented Soffit
Molding-16V80
WS-FCB:
Weep Screed
Page
Page
79
80
XDM: X Drywall Corner
Molding
www.StocktonProducts.com
NEW
XPM:
X Plaster Molding
63
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 64
KEY
EXTRUDED ALUMINUM
PLASTER/
STUCCO
CONCRETE
PLYWOOD
FOAM
WOOD
CR-FCB: Channel Reveal
for Fiber Cement Board
● Available Vented or No Vents
A decorative reveal used to create an aesthetically pleasing vertical accent
between panels. Available vented for soffit venting requirements.
Note: Do not use in a horizontal condition.
NEW
3/8”
3/8”
Y
X
Length
10’
1”
Optional
Vent Slots
X Size Y Size
3/8”
1/2”
DCS: Drywall Channel Screed
● Available With 1/8” x 1” Vent Slots or No Vents
Drywall version of the plaster channel screed used to create a decorative
reveal & to separate dissimilar materials. Used with one-coat stucco and
direct applied systems. Available with 1/8” weep holes.
x
Length
X Size
Y Size
10’
1/2”
*5/8”
1/2”
3/4”
1”
1 1/2”
2”
3”
4”
Optional
Weep
Holes
CAN BE
CURVED
Optional
Vent Slots
y
*Not available with a
1 1/2” Y size.
DCS 50-2:
Drywall Channel Screed 50 - 2 pc.
● Available With 1/8” x 1” Vent Slots or No Vents
A two-piece version of the DCS series molding that
provides 1/4” +/- movement where a “true” expansion
joint is required. Used for stucco over block or when
only a 1/2” depth is required.
Length
X Size
Y Size
10’
1/2”
3/4”
1/4”
1/2”
3/4”
1”
1 1/2”
2”
64
3/16”
Optional
Vent Slots
y
3/16”
CAN BE
CURVED
x
www.StocktonProducts.com
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 65
WATERPROOF
BARRIER
WALL
SHEATHING
DRYWALL
DRYWALL
MUD
EXTRUDED ALUMINUM
FIBER
CEMENT
DMCT: High Strength Corner Trim
A 90° outside corner with taping flanges for drywall. Provides a high
strength corner for high impact areas. Includes key holes for proper
plaster adhesion.
y
CAN BE
CURVED
x
Key
Holes
Key
Holes
Length
X Size
10’
3/8”
Y Size
7/8”
DRM: Wall Reveal
● Available With 1/8” x 1” Vent Slots or No Vents
A reveal molding with taping flanges that provides a decorative reveal in
drywall. This molding is installed after the drywall board, greatly improving
installation ease and time. Includes key holes for proper plaster adhesion.
Note: Not all X Sizes (Depth) or Y Sizes (Reveal)
combinations are available. Please consult with
customer service.
Length
X Size
Y Size
Z Size
10’
1/4”
1/2”
5/8”
1/8”
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1 1/2”
2”
3”
7/8”
CAN BE
CURVED
Key
Holes
Optional
Vent Slots
y
x
Key
Holes
z
DRMB: Reveal Base
“Z” style with a taping flange that provides a reveal and a termination
point for drywall. Includes key holes for proper plaster adhesion.
CAN BE
CURVED
Length
X Size
Y Size
Z Size
10’
5/8”
1”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
7/8”
1-87-STOCKTON
z
Key
Holes
x
y
www.StocktonProducts.com
65
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 66
KEY
EXTRUDED ALUMINUM
DRMF: F Wall Reveal
PLASTER/
STUCCO
CONCRETE
PLYWOOD
WOOD
FOAM
Shown
Vented
● Available With 1/8” x 1” Vent Slots or No Vents
“F” style with a taping flange that creates a reveal and board termination
point at tops and bases of walls and at door and window frames. Includes
key holes for proper plaster adhesion.
Note: Not all X Sizes (Depth) or Y Sizes
(Reveal) combinations are available.
Please consult with customer service.
Length
X Size
Y Size
Z Size
10’
1/4”
1/2”
5/8”
1/8”
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1 1/2”
2”
3”
7/8”
CAN BE
CURVED
Optional
Vent Slots
y
x
z
Key
Holes
DRML: Edge Trim
“L” style drywall molding with a taping flange that provides a drywall
termination point by capping of the raw edge of the drywall board.
Includes key holes for proper plaster adhesion.
CAN BE
CURVED
Length
X Size
10’
1/2”
5/8”
3/4”
1”
1 1/2”
2”
3”
4”
Y Size
7/8”
y
Key
Holes
x
DRMW: W Corner Reveal
“W” style drywall molding with taping flanges that creates an inverted
corner for setbacks, stepdowns and other special drywall conditions.
Includes key holes for proper plaster adhesion.
x
x
Key
Holes
CAN BE
CURVED
Key
Holes
Length
X Size
10’
1/2”
5/8”
66
y
Y Size
7/8”
www.StocktonProducts.com
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 67
WATERPROOF
BARRIER
WALL
SHEATHING
DRYWALL
DRYWALL
MUD
EXTRUDED ALUMINUM
FIBER
CEMENT
DRMZ: Z Wall Reveal
● Available With 1/8” x 1” Vent Slots or No Vents
“Z” style with a taping flange that provides a reveal and a termination
point for drywall at door frames, windows and wall bases. Includes key
holes for proper plaster adhesion.
Note: Not all X, Y and Z conbinations
are available. Please contact factory
for details.
Length
X Size
Y Size
Z Size
10’
1/4”
1/2”
5/8”
1/8”
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1 1/2”
2”
3”
4”
7/8”
CAN BE
CURVED
Key
Holes
z
y
x
DRWT: “W” Reveal
● Available With Vents or No Vents
“W” style drywall molding with taping flange that creates a reveal at a
wall/drywall ceiling condition. Includes key holes for proper plaster
adhesion.
Optional
Vent Slots
CAN BE
CURVED
x
x
Shown
Vented
Length
X Size
10’
3/4”
y
Y Size
3/4”
Key Holes
y
DS: Drip Screed
● Available With 1/8” x 1” Vent Slots or No Vents
An aesthetically pleasing drip screed for conventional 3-coat stucco that
functions as a plaster stop/drip edge and creates a reveal at the fascia/soffit
corner condition.
Note: *1 3/8” X Size available in 7/8” Y Size only.
Note: **2” not available vented.
Note: Not all X Sizes (Depth) or Y Sizes (Reveal)
combinations are available. Please consult with
CAN BE
customer service.
CURVED
Optional
Vent Slots
Length
10’
X Size
Y Size
7/8”
*1 3/8”
1-87-STOCKTON
3/4”
7/8”
**2”
3”
Z Size
z
7/8”
x
y
3/16”
www.StocktonProducts.com
67
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 68
KEY
EXTRUDED ALUMINUM
PLASTER/
STUCCO
CONCRETE
PLYWOOD
WOOD
FOAM
DS300: Drip Screed 3” Reveal
● Available With 1/8” x 1” Vent Slots or No Vents
An aesthetically pleasing drip screed for conventional 3-coat stucco that
functions as a plaster stop/drip edge and creates a reveal at the fascia/soffit
corner condition.
Note: Available vented. Non-vented is a
special order. Please contact factory for details.
Length
X Size
10’
7/8”
CAN BE
CURVED
Y Size
3”
3/16”
Optional
Vent Slots
1”
x
x
Shown
Vented
y
3/16”
EES 75-100 2PC:
Plaster Edge Expansion Screed - 2 pc.
● Available With 1/8” x 1” Vent Slots or No Vents
A 2-piece plaster control screed that permits movement in a plaster
soffit/wall condition.
Note: Available as a special order.
Contact factory for lead times.
CAN BE
CURVED
Optional
Vent Slots
x
Shown
Vented
Length
X Size
10’
3/4”
Y Size
y
1”
F MOLD-FCB: F Mold
for Fiber Cement Board
Creates a decorative reveal in a wall/soffit transition.
NEW
1 5/8”
X
Y
Length
X Size
10’
3/8”
68
Y Size
3/8”
1/2”
www.StocktonProducts.com
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 69
WATERPROOF
BARRIER
WALL
SHEATHING
DRYWALL
DRYWALL
MUD
EXTRUDED ALUMINUM
FIBER
CEMENT
F-D 75-75: F Drip Molding
Provides a plaster stop/drip molding with an aesthetic reveal for window
heads, tops of door frames and plate conditions where a drip edge is
required. Available with 1/8” weep holes.
x
CAN BE
CURVED
Optional
Weep
Holes
y
Length
X Size
10’
3/4”
1 3/8”
Y Size
3/4”
WINDOW
FCM: Fascia Corner Molding
A plaster stop for fascia/soffit corner conditions that provides a reveal on
the soffit portion.
CAN BE
CURVED
z
Length
X Size
Y Size
Z Size
10’
3/4”
7/8”
2 3/16”
y
x
FDM: F Drywall Molding
● Available With 1/8” x 1” Vent Slots or No Vents
A drywall stop/control screed for drywall, used at the top or base of
columns, the top of walls at the ceiling, or at the base to create a reveal.
Also used at the top of windows to permit the continuation of a horizontal
reveal at the window line. Available with 1/8” weep holes.
Note: *Not available with a 1 1/2” Y size.
Note: **Available on 1/2” reveal.
Optional
Vent Slots
Length
X Size
Y Size
10’
1/2”
*5/8”
**1/2”
3/4”
1”
1 1/2”
2”
3”
4”
1-87-STOCKTON
y
Optional
Weep
Holes
CAN BE
CURVED
x
www.StocktonProducts.com
69
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 70
KEY
EXTRUDED ALUMINUM
PLASTER/
STUCCO
CONCRETE
PLYWOOD
FOAM
WOOD
FPM: F Plaster Molding
● Available With 1/8” x 1” Vent Slots or No Vents
A plaster stop/control screed for conventional 3-coat stucco, used at the
top or base of columns, the top of walls at the ceiling, or at the base to
create a reveal. Also used at the top of windows to permit the continuation
of a horizontal reveal at the window line. Available with 1/8” weep holes.
Note: *1 3/8” X Size available in 3/4” Y Size only.
Optional
Vent Slots
Length
10’
X Size
3/4”
*1 3/8”
y
Y Size
1/2”
3/4”
1”
1 1/2”
2”
2 1/2”
3”
4”
Optional
Weep
Holes
CAN BE
CURVED
x
FRWDM:
Facia/Recessed Window Drip Molding
A plaster stop for fascia/soffit corner conditions that provides a 3 1/8”
reveal leg with a drip edge for recessed window conditions where a drip
edge is required. Can be also be used when a caulking leg is required for
backer rod and sealant.
3”
CAN BE
CURVED
WINDOW
Length
X Size
Y Size
10’
7/8”
1 3/8”
3 1/8”
3/16”
y
x
FRWM: Facia/Recessed
Window Molding
A plaster stop for fascia/soffit corner conditions that provides a 3 1/8”
reveal leg for recessed windows. Can be used when a caulking leg is
required for backer rod and sealant.
3”
CAN BE
CURVED
Length
X Size
Y Size
10’
7/8”
1 3/8”
3 1/8”
70
3/16”
y
WINDOW
x
www.StocktonProducts.com
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 71
WATERPROOF
BARRIER
WALL
SHEATHING
DRYWALL
DRYWALL
MUD
EXTRUDED ALUMINUM
FIBER
CEMENT
IC-FCB: Inside Corner
for Fiber Cement Board
Used in an inside corner condition where two fiber cement boards meet.
Y
NEW
X
1 1/8”
Length
X Size
10’
1/2”
Y Size
1/2”
ICR-FCB: Inside Corner Reveal
for Fiber Cement Board
An inside corner trim that creates a decorative 3/8” reveal
at an inside corner condition.
NEW
Y
X
Length
X Size
10’
3/8”
Y Size
3/8”
1 5/8”
J MOLD-FCB: J Mold
for Fiber Cement Board
Used as a termination molding to case off the fiber cement panel.
NEW
1 1/8”
Length
X Size
10’
3/8”
1-87-STOCKTON
3/8”
X
www.StocktonProducts.com
71
040315-Stockton51.qxp_Layout 1 4/7/15 9:37 AM Page 72
KEY
EXTRUDED ALUMINUM
PLASTER/
STUCCO
CONCRETE
PLYWOOD
WOOD
FOAM
JDM: J Drywall Molding
A drywall version of the “J” molding. Gives a nice finished look to
drywall terminations.
CAN BE
CURVED
Length
X Size
Y Size
10’
1/2”
5/8”
1 1/8”
y
x
JPM: J Plaster Molding
A plaster stop/casing bead for conventional 3-coat stucco used in a variety
of conditions that gives a nice finished look at all plaster terminations.
Note: *2” Y Size available on 1 1/2” and 1 3/8” X Size only.
CAN BE
CURVED
y
Length
X Size
Y Size
10’
3/4”
1”
1 1/2”
1 3/8”
1 1/8”
*2”
x
NVS: Narrow V Screed
A narrow control screed that is both decorative and functional. A 1/8”
wide expansion screed for conditions that require crack control with a
minimal reveal.
CAN BE
CURVED
Length
X Size
10’
1/2”
3/4”
7/8”
72
y
Y Size
1/8”
x
www.StocktonProducts.com
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:38 AM Page 73
WATERPROOF
BARRIER
WALL
SHEATHING
DRYWALL
DRYWALL
MUD
EXTRUDED ALUMINUM
FIBER
CEMENT
OC-FCB: Outside Corner
for Fiber Cement Board
Creates a decorative reveal and a high strength
protective corner at an outside corner condition.
1 1/2”
NEW
X
X
3/8”
Length
X Size
10’
3/8”
OCG-FCB: Outside Corner Guard
for Fiber Cement Board
Creates a decorative high
strength corner at an
outside corner condition.
NEW
1 1/2”
X
X
Length
X Size
10’
3/8”
3/4”
PCM: Plaster Corner Molding
Creates a plaster stop and high strength corner for conventional
3-coat stucco with an aesthetically pleasing exposed edge at all
outside corner conditions.
y
CAN BE
CURVED
Length
X Size
Y Size
10’
3/4”
7/8”
1 5/8”
1-87-STOCKTON
x
3/16”
www.StocktonProducts.com
73
040315-Stockton51.qxp_Layout 1 4/7/15 9:38 AM Page 74
KEY
EXTRUDED ALUMINUM
PLASTER/
STUCCO
CONCRETE
PLYWOOD
FOAM
WOOD
PCS: Plaster Channel Screed
● Available With 1/8” x 1” Vent Slots or No Vents
A decorative reveal used as a plaster stop/control screed for conventional
3-coat stucco to separate dissimilar materials and/or to create aesthetically
pleasing shadow lines on the exterior walls, ceilings and soffits. Available
with 1/8” weep holes.
Note: *Venting is not available on the 1/2” reveal.
x
Note: **1 1/2” X Size available in 1 1/2” Y Size only.
Note: ***Available in 3/4” Y Size only.
Length
10’
X Size
3/4”
1”
**1 1/2”
***1 3/8”
Optional
Weep
Holes
Y Size
*1/2”
3/4”
1”
1 1/2”
2”
2 1/2”
3”
4”
6”
CAN BE
CURVED
Optional
Vent Slots
y
PCS 50-25/25:
Plaster Channel Screed 50-25/25
Plaster channel screed with minimal reveal width and ground depth for
conditions that require a control joint with a small reveal for 1/2” of stucco
over block.
x
3/16”
CAN BE
CURVED
y
3/16”
Length
X Size
10’
1/2”
Y Size
1/4”
Z Size
z
z
1/4”
PCS 75-2:
Plaster Channel Screed 75-2 Piece
● Available With 1/8” x 1” Vent Slots or
No Vents
A two-piece version of the PCS series molding that
provides 1/4” +/- movement where a “true”
expansion joint is required. In a double stud
condition, this molding is typically used in a
horizontal condition at floor lines where deflection is
an issue. 1/8” weep holes available.
Optional
Weep
Holes
Optional
Vent Slots
Length
X Size
10’
1/2”
3/4”
74
y
Y Size
1/4”
1/2”
3/4”
1”
2”
CAN BE
CURVED
x
www.StocktonProducts.com
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:38 AM Page 75
WATERPROOF
BARRIER
WALL
SHEATHING
DRYWALL
DRYWALL
MUD
EXTRUDED ALUMINUM
FIBER
CEMENT
PCS 75-25/25:
Plaster Channel Screed 75-25/25
Plaster channel screed with minimal reveal width and ground depth for
conditions that require a control joint with a small reveal.
x
CAN BE
CURVED
Length
10’
W Size
y
X Size
Y Size
Z Size
3/4”
1/4”
1/4”
1/2”
w
z
PCS 75 Short V:
Plaster Channel Screed Short V
A plaster channel screed that creates a unique 90°
“V” shaped reveal.
CAN BE
CURVED
z
Length
X Size
Y Size
Z Size
10’
1/2”
3/4”
3/4”
2 7/8”
90°
y
x
PCS 75 Wide V:
Plaster Channel Screed Wide V
A plaster channel screed that creates a unique,
wide 90° “V” shaped reveal.
x
w
CAN BE
CURVED
90°
y
3/16”
Length
10’
W Size
3 5/8”
1-87-STOCKTON
X Size
Y Size
3/4”
1 1/2”
www.StocktonProducts.com
75
040315-Stockton51.qxp_Layout 1 4/7/15 9:38 AM Page 76
KEY
EXTRUDED ALUMINUM
PLASTER/
STUCCO
CONCRETE
PLYWOOD
WOOD
FOAM
PCS DA: Plaster Channel Screed DA
● Available With 1/8” x 1” Vent Slots or No Vents
A decorative reveal used as a plaster stop/control screed for direct applied
and one coat systems.
x
Optional
Weep
Holes
3/16”
CAN BE
CURVED
Optional
Vent Slots
Length
X Size
Y Size
10’
3/8”
1/2”
3/4”
1”
1 1/2”
y
3/16”
PJ-FCB: Panel Joiner
for Fiber Cement Board
A functional trim piece used to join two panels together in a
vertical condition.
Note: Do not use in a horizontal condition.
1/2”
NEW
X
2”
Length
X Size
10’
3/8”
RWM: “W” Reveal Molding
● Available With Vents or No Vents
“W” style molding that creates a reveal at a wall and
suspended/acoustical ceiling.
x
CAN BE
CURVED
Optional
Vent Slots
1”
Acoustical
Ceiling Tile
x
Length
X Size
10’
3/4”
76
Y Size
3/4”
y
www.StocktonProducts.com
Shown
Vented
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:38 AM Page 77
WATERPROOF
BARRIER
DRYWALL
WALL
SHEATHING
DRYWALL
MUD
EXTRUDED ALUMINUM
FIBER
CEMENT
SB-FCB: Starter Base
for Fiber Cement Board
A functional starter trim piece for the fiber
cement panel that also provides a weep point
for moisture.
NEW
X
2”
97°
1/2”
Length
X Size
10’
3/8”
SV: Soffit Vent
● Available With 1/8” x 1” Vent Slots
For use with E.I.F.S. as a soffit vent.
Note: 1/2” X Size available in 2” Y Size only.
Note: Not all X Sizes (Depth) or Y Sizes (Reveal) combinations are
available. Please consult with customer service.
Vent Slots
x
CAN BE
CURVED
1/2”
Length
y
1/2”
X Size Y Size
10’
3/4”
1/2”
3”
2”
4”
TDM: T Drywall Molding
● Available With 1/8” x 1” Vent Slots or No Vents
Provides a reveal and acts as a drywall stop/control screed for drywall at
wall base and column base conditions where a reveal and stop are
required. Can be used to create a reveal at ceiling/wall conditions.
y
Length
X Size
Y Size
10’
1/2”
5/8”
1/2”
3/4”
1”
1 1/2”
2”
3”
4”
1-87-STOCKTON
CAN BE
CURVED
Optional
Vent Slots
x
www.StocktonProducts.com
77
040315-Stockton51.qxp_Layout 1 4/7/15 9:38 AM Page 78
KEY
EXTRUDED ALUMINUM
PLASTER/
STUCCO
CONCRETE
PLYWOOD
WOOD
FOAM
TRM: T Reveal Molding
● Available With 1/8” x 1” Vent Slots or No Vents
Provides a reveal and acts as a plaster stop/control screed for
conventional 3-coat stucco at wall base and column base conditions
where a reveal and plaster stop are required. Can be used to create a
reveal at ceiling/wall conditions.
y
Length
X Size
Y Size
10’
3/4”
3/4”
1”
1 1/2”
2”
2 1/2”
3”
4”
CAN BE
CURVED
Optional
Vent Slots
x
VSMV: Vented Soffit Molding - 16V80
● Available With 1/8” x 1” Vent Slots or No Vents
Creates a vented reveal and plaster stop at a wall/ceiling condition.
Note: Available non-vented on special order.
CAN BE
CURVED
Optional
Vent Slots
x
y
Shown
Vented
Length
X Size
10’
3/4”
Y Size
2”
WS-FCB: Weep Screed
for Fiber Cement Board
A decorative reveal that creates a weep point that
allows moisture to weep out and away from the
fiber cement panels.
NEW
1 3/4”
97°
X
Length
X Size
10’
1/2”
78
1/2”
www.StocktonProducts.com
1-87-STOCKTON
040315-Stockton51.qxp_Layout 1 4/7/15 9:38 AM Page 79
WATERPROOF
BARRIER
WALL
SHEATHING
DRYWALL
DRYWALL
MUD
EXTRUDED ALUMINUM
FIBER
CEMENT
WPM: Plaster Soffit Reveal Molding
● With 1/8” x 1” Vent Slots
A screed that provides a plaster stop and creates a reveal at ceiling/wall
conditions. Vented to provide free air flow at the perimeter.
Note: Available non-vented on special order.
z
Vent Slots
CAN BE
CURVED
x
y
Length
X Size
Y Size
Z Size
10’
3/4”
2”
3”
4”
1”
WHD-FCB: Window Head Drip
for Fiber Cement Board
A multi-use drip molding that can be
used at window and door heads,
as well as at the foundation.
NEW
Length
X Size
10’
3/8”
1 3/4”
X
1 1/2”
XDM: X Drywall Corner Molding
A drywall version of the “X” corner molding that creates a unique “inverse”
corner look.
CAN BE
CURVED
x
Length
X Size
10’
1/2”
5/8”
Y Size
1-87-STOCKTON
y
1/2”
5/8”
www.StocktonProducts.com
79
040315-Stockton51.qxp_Layout 1 4/7/15 9:38 AM Page 80
EXTRUDED ALUMINUM
XPM: X Plaster Molding
Creates a decorative inverted corner reveal detail for conventional 3-coat
stucco at fascia/soffit conditions and around recessed entryways and doors.
Can also be used to trim off the tops of pony walls and used as a drip edge
on a fascia/soffit condition.
CAN BE
CURVED
x
CAN BE
CURVED
Length
X Size
10’
3/4”
y
Y Size
3/4”
Did you know?
s, slows the curing time of
tub
d
un
po
4
in
le
ilab
ava
w
no
,
● Pozalite
ger open time and a more
stucco and concrete, offering lon82
durable final product. See page
™
lded wire corners are
● Most CornerAid and other we
available in stainless steel.
ped Nail Flange” assures
● Stockton Products’ new “Step nimizes flexing of the
proper fastener location and mi icon!
trim, reveal or vent. Look for this
gStop™ offers insect intrusion
● Stockton Products’ patented Bu
es. See page 49
protection in a variety of vent siz
le Wire flange welded
DOUBLE
● Stockton Products offers Doub e installers more options
WIRE
FLANGE
wire products. Designed to giv r during installation.
in attaching the reinforcing corne
convenience, available at both
ur
yo
for
e
lin
on
is
cts
du
Pro
on
● Stockt
on www.facebook.com
www.StocktonProducts.com and
has made available to its
● For 13 years Stockton Products ts, featuring vintage cars and
customers limited edition T-shir entative for details!
trucks. Contact your sales repres
®
80
www.StocktonProducts.com
1-87-STOCKTON