Fusetron®
FRN-R
Dual-Element, Time-Delay Fuses
Class RK5 - 250 Volt
⁄10-60A
1
Dimensional Data
2"
(± 0.31)
0.56" (± 0.008)
1/10 A
to 30A
3"
(± 0.31)
0.81" (± 0.008)
35A to 60A
Catalog Symbol: FRN-R
Current-Limiting
Dual-Element, Time-Delay – 10 seconds (minimum) at 500%
rated current (8 seconds for 0-30A sizes)
Ampere Rating: 1⁄10 to 60 Amperes
Voltage Rating: 250Vac (or less)
Interrupting Rating: 200,000A RMS Sym.
DC Ratings: 20,000 AIC @ 125Vdc
Agency Information:
UL Listed, Std. 248-12, Class RK-5, Guide JDDZ, File E4273
CSA Certified, C22.2 No. 248.12, Class 1422-01, File 53787
Catalog Numbers
General Information:
• Provides motor overload, ground fault and short-circuit
protection.
• Helps protect motors against burnout from overloads.
• Helps protect motors against burnout from single phasing
on three phase systems.
• Simplifies and improves blackout prevention (selective
coordination).
• Dual-element fuses can be applied in circuits subject
to temporary motor overloads and surge currents to
provide both high performance short-circuit and
overload protection.
• The overload element provides protection against low level
overcurrent of overloads and will hold an overload which is
five times greater than the ampere rating of the fuse for a
minimum of ten seconds.
FRN-R-1⁄10
FRN-R-18⁄10
FRN-R-8
FRN-R-1⁄8
FRN-R-2
FRN-R-9
FRN-R-15⁄100
FRN-R-21⁄4
FRN-R-10
FRN-R- ⁄10
FRN-R-21⁄2
FRN-R-12
FRN-R-1⁄4
FRN-R-28⁄10
FRN-R-15
FRN-R-3⁄10
FRN-R-3
FRN-R-171⁄2
Fuse Reducers For Class R Fuses
FRN-R-4⁄10
FRN-R-3 2⁄10
FRN-R-20
FRN-R-1⁄2
FRN-R-31⁄2
FRN-R-25
Equipment
Fuse Clips
Desired Fuse
(Case) Size
FRN-R-6⁄10
FRN-R-4
FRN-R-30
60A
30A
No. 263-R
FRN-R-8⁄10
FRN-R-41⁄2
FRN-R-35
30A
No. 213-R
FRN-R-1
FRN-R-5
FRN-R-40
FRN-R-11⁄8
FRN-R-5 6⁄10
FRN-R-45
FRN-R-11⁄4
FRN-R-6
FRN-R-50
FRN-R-14⁄10
FRN-R-61⁄4
FRN-R-60
FRN-R-11⁄2
FRN-R-7
—
FRN-R-16⁄10
FRN-R-71⁄2
—
2
100A
200A
No. 216-R
No. 226-R
(Clip Retaining Spring Standard, Suffix “R”)
See Data Sheet 1110
Terminal
Screw w/
—
Pres.
Plate
SR
PR
Type (Suffix No.)
1
Box Lug w/
⁄2˝
—
Clip
QuickCU only Connect
CR
COR
QR
R25030-2
SR
PR
CR
COR
R25030-3
SR
PR
CR
COR
—
1
R25060-1
SR
—
CR
—
—
to
2
R25060-2
SR
—
CR
—
—
60
3
R25060-3
SR
—
CR
—
—
Weight*
Carton
Qty.
Lbs.
Kg.
0–15
10
0.40
0.181
17.5–30
10
0.50
0.227
Amps
1
⁄10
35–60
10
1.00
0.453
to
2
30
3
31
*Weight per carton.
60A
60A
Fuseblocks for Class R Fuses
Carton Quantity and Weight
Ampere
Ratings
Basic
Catalog
Poles Number
1
R25030-1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370
Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
10-08 BU-SB08353
Catalog Number
(Pairs) 250V
Page 1 of 2
Data Sheet 1019
—
Time-Current Characteristic Curves–
Average Melt
Time-Current Characteristic Curves–Average Melt
8 10 15
30
60
Peal Current In Amps
Current-Limitation Curve
RMS Symmetrical Currents In Amps
A–B–Asymmetrical Available Peak (2.3 x Sym RMS Amps)
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of
this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of
any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice,
any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
© 2009 Cooper Bussmann Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370
Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
St. Louis, MO 63178
www.cooperbussmann.com
10-08 BU-SB08353
Page 2 of 2
Data Sheet 1019
Fusetron®
FRN-R
Dual-Element, Time-Delay Fuses
Class RK5 – 250 Volt
70-600A
Dimensions - in
5.88”
1.06”
70 to 100A
7.13”
1.56”
110 to 200A
8.63” ± 0.094
2.38” ± 0.020
225 to 400A
10.38” ± 0.094
2.88” ± 0.020
Catalog Symbol: FRN-R †
Current-Limiting
Dual-element, time-delay – 10 seconds (minimum) at 500%
rated current
Amp Rating: 70 to 600A
Voltage Rating:
250Vac (or less)
125Vdc (110-200A)
250Vdc (225-600A)
Interrupting Rating:
200,000A RMS Sym.
20,000A dc
Agency Information:
CE, UL Listed, Std. 248-12, Class RK5, Guide JDDZ, File E4273
CSA Certified, C22.2 No. 248.12, Class 1422-01, File 53787
Catalog Numbers - Amp Rating
FRN-R-70
FRN-R-125
FRN-R-350
FRN-R-75
FRN-R-150
FRN-R-400
FRN-R-80
FRN-R-175
FRN-R-450
FRN-R-85
FRN-R-200
FRN-R-500
FRN-R-90
FRN-R-225
FRN-R-600
FRN-R-100
FRN-R-250
—
FRN-R-110
FRN-R-300
—
450 to 600A
General Information:
• Provides motor overload, ground fault and short-circuit
protection.
• Helps protect motors against burnout from overloads and
single-phasing when sized properly.
• Simplifies and improves blackout prevention (selective
coordination).
• Dual-element fuses can be applied in circuits subject to
temporary motor overloads and surge currents to provide
both high performance short-circuit and overload
protection.
• The overload element provides protection against low level
overcurrent of overloads and will hold on inrush current
which is five times greater than the amp rating of the fuse
for a minimum of ten seconds.
Fuse Reducers For Class R Fuses
Equipment
Fuse Clips
Desired Fuse
(Case) Size
200A
100A
No. 2621-R
100A
No. 2641-R
200A
No. 242-R
100A
No. 2661-R
400A
Carton Quantity and Weight
Weight*
Amp
Ratings
Carton
Qty.
Lbs.
Kg.
70–100
5
1.5
0.680
101–200
1
0.77
0.349
201–400
1
1.52
0.689
401–600
1
3.0
1.4
600A
Catalog Number
(Pairs) 250V
200A
No. 2662-R
400A
No. 2664-R*
*Single reducer only (pair not required).
*Weight per carton.
† To obtain information for 0-60A, access Data Sheet: 1019 or
1169 (8-60A with indication)
0709 BU-SB08920
Page 1 of 3
Data Sheet 1020
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Class RK5 Fuse Blocks (250V) Catalog Data
(Clip Retaining Spring Standard, Suffix “R”)
Amps
70
to
100
Poles
1
2
3
1
110 to 200
3
1
225 to 400
3
1
450 to 600
3
Terminal Type (Suffix No.)
Basic Box Lug w/
Catalog
—
Reinforced Clip
Number
CU only
R25100-1
CR
COR
R25100-2
CR
COR
R25100-3
CR
COR
R25200-1
CR
—
R25200-3
CR
—
R25400-1
CR
—
R25400-3
CR
—
R25600-1
CR
—
R25600-3
CR
—
Recommended fuseblocks for
Class R 250V fuses
See Data Sheet 1110
400
600
200
100
60
Time-Current Characteristic Curves–Average Melt
Form 250 Rev. A
Note: 60 amp fuse is ferrule style. Curve is shown for relative
performance only.
0709 BU-SB08920
Page 2 of 3
Data Sheet 1020
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Peak Current In Amps
Current-Limitation Curves
RMS Symmetrical Currents In Amps
A–B=Asymmetrical Available Peak (2.3 x Symm RMS Amps)
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of
this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information
that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any
products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any
technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
© 2009 Cooper Bussmann
St. Louis, MO 63178
www.cooperbussmann.com
0709 BU-SB08920
Page 3 of 3
Data Sheet 1169
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com