TIG equipment
AC/DC Inverters
Caddy® Tig 2200i AC/DC
Compact and portable inverter for AC/DC TIG welding, with HF or LiftArc™ start,
and MMA.
• Durable and impact resistant design with OKC 50 cable connectors.
• Easy to operate.
• Digital display for settings.
• Plate thickness setting for TIG (TA33 AC/DC). Set the plate thickness and the
machine will control the welding parameters.
• Adjustable slope down and gas post-flow (TA33 AC/DC).
• DC pulsed TIG (TA34 AC/DC) giving increased control of heat input and weld pool.
• Two memories (TA34 AC/DC) for storing of settings.
• Micro Pulse (TA34 AC/DC) minimising heat affected zone especially on thin
material.
• Adjustable slope up/down and gas post-flow (TA34 AC/DC).
• Remote control possibility.
• ArcPlus II regulator for better MMA welding characteristics. Higher weld quality
with less after treatment.
• All types of material, including aluminium, and thickness up to 5 mm
• Can operate with extra long mains cables, over 100 m, thanks to the built-in PFC
circuit.
• IP 23 – designed for outdoor use making it safe on all work sites.
Origo™ Tig 3000i AC/DC,
TA24 AC/DC
In both DC and AC mode this TIG welding machine will give an excellent start and
stable arc. All types of material and thicknesses can be welded with the highest
quality.
• Designed for quality TIG-welding in all types of material.
• QWave™ – enables AC welding with high arc stability and low noise.
• AC frequency and balance control optimizes weld pool.
• DC pulsed TIG welding gives easy control of heat input.
• ESAB 2-program function. Possibility to pre-program and change program during
welding.
• Easy to use. All parameters presented in an easily comprehensible way.
• MMA welding: Hot start, arc force and polarity switch.
Delivery includes
5 m of mains cable, 2 m of gas hose with 2 hose clamps, return cable 4.5 m incl.
earth clamp.
Delivery includes
3 m of mains cable, 2 m of gas hose with two hose clamps. Return cable 3 m incl.
earth clamp.
Mains supply, V/Hz
Fuse, slow, A
Mains cable, Ø mm2
Max output at 20% duty cycle, TIG, A/V
Max output at 60% duty cycle, TIG, A/V
Max output at 100% duty cycle, TIG, A/V
Slope up, s
Slope down, s
Gas pre-flow, s
Gas post-flow, s
Open circuit voltage VRD (off/on), V
Setting range TIG AC/DC
Setting range MMA
Weight, kg
Caddy® Tig
2200i AC/DC,
TA34 AC/DC
Caddy® Tig
2200i AC/DC,
TA33 AC/DC
230/1 50/60
16
3 x 2.5
220/18.8
150/16.0
140/15.6
0-10
0-10
0-5
0-25
46-60/<35
3-220
4-160
15
230/1 50/60
16
3 x 2.5
220/18.8
150/16.0
140/15.6
0-9.9
0-10
0-5
0-25
46-60/<35
3-220
4-160
15
Ordering information
Caddy® Tig 2200i AC/DC, TA33 AC/DC, TXH™ 200 4m,
MMA Kit
Caddy® Tig 2200i AC/DC, TA34 AC/DC, TXH™ 200 4m,
MMA Kit
Caddy® Tig 2200i AC/DC, TA34 AC/DC, TXH™ 250w 4m,
water cooler CoolMini, MMA kit, two-wheel trolley
Caddy® Tig 2200i AC/DC, TA34 AC/DC
Caddy® Tig 2200i AC/DC, TA33 AC/DC
Cooling unit, CoolMini
Origo™ Tig 3000i AC/DC
Mains supply, V/Hz
Fuse, slow, A
Mains cable, Ø mm2
Max output at 35% duty cycle, TIG, A
Max output at 60% duty cycle, TIG, A
Max output at 100% duty cycle, TIG, A
Slope up, s
Slope down, s
Gas pre-flow, s
Gas post-flow, s
Open circuit voltage, V
Setting range TIG AC/DC, A/V
Setting range, A
Weight, kg
0460 150 882
Ordering information
0460 150 883
Origo™ Tig 3000i AC/DC, TA24 AC/DC
Cooling unit, CoolMidi 1800
400/50-60
20
4x4
300
240
200
0-10
0-10
0-5
0-25
54-64
4-300
16-300
42
0459 735 880
0459 840 880
0460 150 884
0460 150 880
0460 150 881
0460 144 880
13