Metal Batten Strip
1.
Description
Firestone Metal Batten Strip is designed for mechanical attachment of the UltraPly TPO roofing membrane and
flashing details as specified in Firestone specifications and details.
2.
Preparation
When site cutting of the Metal Batten Strip is necessary, all cut surfaces must be rounded and filed to remove
burrs and sharp edges.
3.
Application
Layout the Metal Batten Strips as specified and attach them to the substrate using the appropriate Firestone
fastener. To avoid buckling of the strip, start at one end of the batten strip and fasten towards the other. Do not
overdrive or underdrive the fastener.
4.
Coverage
In compliance with the requirements. Adjoining strips need to overlap and are to be fastened with a single
fastener.
5.
Characteristics
Technical
6.
Material
Galvalume® AZ 55
Length (m)
3.05
Width (mm)
25.4
Thickness (mm)
1.13/1.29
Holes (mm)
152 mm o.c.
Packaging / Storage / Shelf Life
4. Product Data Sheets
Packaging: 50 pieces (3.05 m)/cardboard tube (152.4 m).
Storage: Store in original unopened container protected from the weather.
Shelf Life: Unlimited, if properly stored.
4 • 29
TPO Product Data Sheets