CONTRACTOR POCKET Reference Volume 4 Enclosures • Wireway • Trough Information at your fingertips hoffmanonline.com The comprehensive Hoffman brand Web site not only offers the industry’s largest line of enclosures and accessories, but is also the most complete information resource for enclosure education and specification: ▶ Complete online catalog featuring over 10,000 standard products ▶ Product selection and configuration tools ▶ Component, 2D and 3D drawing downloads ▶ Technical resources, specification sheets, instructions and more ▶ Thermal management, chemical resistance and hazardous location data The Hoffman Brand Provides Equipment Protection Solutions for a Wide Variety of Industries Pentair Technical Products’ Hoffman brand is recognized as an industry leader providing a broad range of standard, modified and engineered enclosure solutions, and extensive technical expertise. The Commercial Construction Market Off-the-Shelf Innovation Saves Commercial and HVAC Contractors Time and Money Pentair Technical Products has what you need for every application—Hoffman junction boxes, weatherproof outdoor enclosures, basic panel enclosures, wireway and trough. New product introductions include additional current transformer cabinets, drive cabinets, cable supports and accessories, and wire mesh cable tray products. Rely on Hoffman for innovative, feature-rich standard products that save you time and money. Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 2 Product Selection Quick Reference Small Enclosures Type 1 Type 3R Medium Enclosures Large Enclosures Wireway and Trough 2-12, 14-16 17, 34 18 40-51, 54, 56-59 19-29 30, 32, 38 36 52, 55, 60 Table of Contents 1. Type 1 Screw-Cover Pull Boxes, Type 1 with Knockouts.................................................................... 2 Screw-Cover Pull Boxes, Type 1 without Knockouts.............................................................. 5 Screw-Cover Pull Boxes, Type 1, Accessories..................................................................... 9 Flush-Mount Door Frames.................................................................................................. 9 Flush Covers.............................................................................................................................. 9 Type 1 Locking Window Pull Box Accessory.............................................................. 10 Locking Integrated Perforated Panel Enclosure, Type 1............................................. 11 Type 1 Pull Box Perforated Panel.......................................................................................... 12 T1FLO ® Vented Enclosure with Fan, Type 1...................................................................... 13 Hinged-Cover Cutout Boxes, Type 1................................................................................... 14 Hinged-Cover Small, Type 1................................................................................................... 16 Hinged-Cover Medium, Type 1............................................................................................. 17 Hinged-Cover Large, Type 1................................................................................................... 18 2. Type 3R WEATHERFLO ® with Fan, Type 3R........................................................................................ 19 Horizontal-Mount, Type 3R.....................................................................................................20 Screw-Cover, Type 3R with Knockouts..................................................................................... 21 Screw-Cover, Type 3R without Knockouts............................................................................... 24 Screw-Cover Galvanized, Type 3R........................................................................................26 Screw-Cover Gasketed, Type 3R...........................................................................................28 Hinged-Cover Small, Type 3R.................................................................................................29 Hinged-Cover Medium, Type 3R...........................................................................................30 Hinged-Cover Lift-Off, Type 3R............................................................................................. 31 WEATHERPRO ® Outdoor Pad-Mount, Type 3R............................................................... 32 3. Telephone Cabinets Telephone Cabinet, Type 1.....................................................................................................34 T3-Box Telephone Cabinet, Type 3R...................................................................................36 4. Terminal Boxes Terminal Box, Type 3R...............................................................................................................38 Terminal Box, Type 3R, Accessories..................................................................................... 39 5. Lay-In Wireway and Wiring Trough Lay-In Galvanized Wireway, NEMA Type 1........................................................................40 Lay-In Painted Flat-Cover Wireway, NEMA Type 1.........................................................44 Lay-In Hinged-Cover Wireway, NEMA Type 1..................................................................48 Lay-In Wireway, NEMA Type 3R............................................................................................. 52 Wiring Trough, NEMA Type 1.................................................................................................54 Wiring Trough, NEMA Type 3R............................................................................................... 55 CLEAN TRAY® Stainless Steel Cable Tray, Type 1............................................................56 EconoTrough, NEMA Type 3R.................................................................................................60 Technical Information Table of Contents...................................................... 61 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 1 Bulletin A90P1 Screw-Cover Pull Boxes, Type 1 Industry Standards UL 50, 50E Listed; Type 1; File No. E27525 cUL Listed per CSA C22.2 No 40; Type 1; File No. E27525 NEMA/EEMAC Type 1 IEC 60529, IP30 { Reading Catalog Numbers E = Painted ASE 10 G = Galvanized H X 8 W X 6 D With Knockouts Catalog Number ASE4X4X3 ASG4X4X3 ASE6X6X3 ASG6X6X3 ASE8X6X3 ASG8X6X3 ASE16X14X3 ASE18X14X3 ASE4X4X4 ASG4X4X4 ASE6X4X4 ASG6X4X4 2 Number of Cover Screws Knockout Pattern along “H” Sides Knockout Pattern along “W” Sides 2 B-C B-C 2 B-C B-C 2 B-C-D B-C-D 2 B-C-D B-C-D 2 F-G-H-I B-C-D 2 F-G-H-I B-C-D 4 B-C-D-E-F-G-H B-C-D-E-F-G-H 4 A-B-C-D-E-F-G-H-I B-C-D-E-F-G-H 2 B-C B-C 2 B-C B-C 2 B-C-D B-C 2 B-C-D B-C Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin A90P1 Screw-Cover Pull Boxes, Type 1 With Knockouts (Cont.) Catalog Number ASE6X6X4 ASG6X6X4 ASE8X6X4 ASG8X6X4 ASE8X8X4 ASG8X8X4 ASE10X8X4 ASG10X8X4 ASE10X10X4 ASG10X10X4 ASE12X8X4 ASG12X8X4 ASE12X10X4 ASG12X10X4 ASE12X12X4 ASG12X12X4 ASE16X12X4 ASG16X12X4 ASE18X12X4 ASG18X12X4 ASE18X18X4 ASG18X18X4 ASE24X12X4 ASE24X24X4 ASG24X24X4 ASE30X24X4 ASE6X6X6 ASG6X6X6 ASE8X6X6 Number of Cover Screws Knockout Pattern along “H” Sides Knockout Pattern along “W” Sides 2 B-C-D B-C-D 2 B-C-D B-C-D 2 F-G-H-I B-C-D 2 F-G-H-I B-C-D 4 F-G-H-I F-G-H-I 4 F-G-H-I F-G-H-I 4 F-G-H-I F-G-H-I 4 F-G-H-I F-G-H-I 4 F-G-H-I C-D-E-F-G 4 F-G-H-I C-D-E-F-G 4 C-D-E-F-G F-G-H-I 4 C-D-E-F-G F-G-H-I 4 C-D-E-F-G C-D-E-F-G 4 C-D-E-F-G C-D-E-F-G 4 C-D-E-F-G C-D-E-F-G 4 C-D-E-F-G C-D-E-F-G 4 B-C-D-E-F-G-H C-D-E-F-G 4 B-C-D-E-F-G-H C-D-E-F-G 4 A-B-C-D-E-F-G-H-I C-D-E-F-G 4 A-B-C-D-E-F-G-H-I C-D-E-F-G 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I C-D-E-F-G 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 6 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 2 B-C-D B-C-D 2 B-C-D B-C-D 2 F-G-H-I B-C-D Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 1 3 Bulletin A90P1 Screw-Cover Pull Boxes, Type 1 With Knockouts (Cont.) Catalog Number ASE8X8X6 ASG8X8X6 ASE10X8X6 ASG10X8X6 ASE10X10X6 ASG10X10X6 ASE12X10X6 ASG12X10X6 ASE12X12X6 ASG12X12X6 ASE16X12X6 ASG16X12X6 ASE16X16X6 ASG16X16X6 ASE18X12X6 ASG18X12X6 ASE18X18X6 ASG18X18X6 ASE24X18X6 ASG24X18X6 ASE24X24X6 ASG24X24X6 ASE30X24X6 ASG30X24X6 ASE36X24X6 ASE8X8X8 ASE12X12X8 ASG12X12X8 4 Number of Cover Screws Knockout Pattern along “H” Sides Knockout Pattern along “W” Sides 4 F-G-H-I F-G-H-I 4 F-G-H-I F-G-H-I 4 F-G-H-I F-G-H-I 4 F-G-H-I F-G-H-I 4 F-G-H-I C-D-E-F-G 4 F-G-H-I C-D-E-F-G 4 C-D-E-F-G C-D-E-F-G 4 C-D-E-F-G C-D-E-F-G 4 C-D-E-F-G C-D-E-F-G 4 C-D-E-F-G C-D-E-F-G 4 B-C-D-E-F-G-H C-D-E-F-G 4 B-C-D-E-F-G-H C-D-E-F-G 4 B-C-D-E-F-G-H B-C-D-E-F-G-H 4 B-C-D-E-F-G-H B-C-D-E-F-G-H 4 A-B-C-D-E-F-G-H-I C-D-E-F-G 4 A-B-C-D-E-F-G-H-I C-D-E-F-G 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 6 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 6 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 6 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 F-G-H-I F-G-H-I 4 C-D-E-F-G C-D-E-F-G 4 C-D-E-F-G C-D-E-F-G Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin A90P1 Screw-Cover Pull Boxes, Type 1 With Knockouts (Cont.) Catalog Number ASE16X12X8 ASE18X12X8 ASE24X12X8 ASE24X18X8 ASE24X24X8 ASE36X24X8 ASE18X12X10 ASE18X18X10 ASE24X18X10 ASE24X24X10 ASE36X24X10 ASE24X12X12 ASE18X18X12 ASE24X18X12 ASE24X24X12 ASE30X24X12 ASE36X24X12 Number of Cover Screws Knockout Pattern along “H” Sides Knockout Pattern along “W” Sides 4 B-C-D-E-F-G-H C-D-E-F-G 4 A-B-C-D-E-F-G-H-I C-D-E-F-G 4 A-B-C-D-E-F-G-H-I C-D-E-F-G 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 6 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I C-D-E-F-G 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 6 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I C-D-E-F-G 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 4 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 6 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 6 A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I 1 Without Knockouts Catalog Number ASE4X4X3NK ASG4X4X3NK ASE6X6X3NK ASG6X6X3NK ASE8X6X3NK Number of Cover Screws 2 2 2 2 2 Catalog Number ASG8X6X3NK ASE16X14X3NK ASE20X14X3NK ASE4X4X4NK ASG4X4X4NK Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Number of Cover Screws 2 4 4 2 2 5 Bulletin A90P1 Screw-Cover Pull Boxes, Type 1 Without Knockouts (Cont.) Catalog Number ASE6X4X4NK ASG6X4X4NK ASE6X6X4NK ASG6X6X4NK ASE8X6X4NK ASG8X6X4NK ASE8X8X4NK ASG8X8X4NK ASE10X6X4NK ASG10X6X4NK ASE10X8X4NK ASG10X8X4NK ASE10X10X4NK ASG10X10X4NK ASE12X6X4NK ASG12X6X4NK ASE12X8X4NK ASG12X8X4NK ASE12X10X4NK ASG12X10X4NK ASE12X12X4NK ASG12X12X4NK ASE15X15X4NK ASG15X15X4NK ASE16X12X4NK ASG16X12X4NK ASE18X12X4NK ASG18X12X4NK ASE18X15X4NK 6 Number of Cover Screws 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Catalog Number ASE18X18X4NK ASG18X18X4NK ASE24X12X4NK ASE24X18X4NK ASG24X18X4NK ASE24X24X4NK ASG24X24X4NK ASE30X24X4NK ASE30X30X4NK ASE6X6X6NK ASG6X6X6NK ASE8X6X6NK ASG8X6X6NK ASE8X8X6NK ASG8X8X6NK ASE10X8X6NK ASG10X8X6NK ASE10X10X6NK ASG10X10X6NK ASE12X6X6NK ASE12X8X6NK ASG12X8X6NK ASE12X10X6NK ASG12X10X6NK ASE12X12X6NK ASG12X12X6NK ASE16X12X6NK ASG16X12X6NK ASE16X16X6NK Number of Cover Screws 4 4 4 4 4 4 4 6 8 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin A90P1 Screw-Cover Pull Boxes, Type 1 Without Knockouts (Cont.) Catalog Number ASG16X16X6NK ASE18X12X6NK ASG18X12X6NK ASE18X18X6NK ASG18X18X6NK ASE24X12X6NK ASG24X12X6NK ASE24X18X6NK ASG24X18X6NK ASE24X20X6NK ASG24X20X6NK ASE24X24X6NK ASG24X24X6NK ASE30X24X6NK ASG30X24X6NK ASE30X30X6NK ASG30X30X6NK ASE36X24X6NK ASG36X24X6NK ASE36X30X6NK ASE36X36X6NK ASG36X36X6NK ASE8X8X8NK ASG8X8X8NK ASE10X10X8NK ASG10X10X8NK ASE12X10X8NK ASE12X12X8NK ASG12X12X8NK Number of Cover Screws 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 8 8 6 6 8 8 8 4 4 4 4 4 4 4 Catalog Number ASE16X12X8NK ASE18X12X8NK ASG18X12X8NK ASE18X18X8NK ASG18X18X8NK ASE24X12X8NK ASG24X12X8NK ASE24X18X8NK ASG24X18X8NK ASE24X20X8NK ASG24X20X8NK ASE24X24X8NK ASG24X24X8NK ASE30X24X8NK ASG30X24X8NK ASE30X30X8NK ASG30X30X8NK ASE36X24X8NK ASG36X24X8NK ASE36X36X8NK ASG36X36X8NK ASE12X12X10NK ASG12X12X10NK ASE18X12X10NK ASE18X18X10NK ASG18X18X10NK ASE24X12X10NK ASE24X18X10NK ASE24X24X10NK Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Number of Cover Screws 1 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 8 6 6 6 8 8 4 4 4 4 4 4 4 4 7 Bulletin A90P1 Screw-Cover Pull Box, Type 1, Accessories Boxes, Type 1 Without Knockouts (Cont.) Catalog Number ASG24X24X10NK ASE30X24X10NK ASE30X30X10NK ASG30X30X10NK ASE36X24X10NK ASG36X24X10NK ASE36X36X10NK ASG36X36X10NK ASE12X12X12NK ASG12X12X12NK ASE24X12X12NK ASG24X12X12NK ASE18X18X12NK ASG18X18X12NK ASE24X18X12NK ASE24X24X12NK 8 Number of Cover Screws 4 6 8 8 6 6 8 8 4 4 4 4 4 4 4 Catalog Number ASG24X24X12NK ASE30X24X12NK ASE30X30X12NK ASG30X30X12NK ASE36X24X12NK ASG36X24X12NK ASE36X36X12NK ASG36X36X12NK ASE48X48X12NK ASG48X48X12NK ASE30X30X16NK ASE36X36X16NK ASG36X36X16NK ASE48X48X16NK ASG48X48X16NK Number of Cover Screws 4 6 8 8 6 6 8 8 12 12 8 8 8 12 12 4 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin A90P1 Screw-Cover Pull Boxes, Type Box, Type 1, 1Accessories Flush-Mount Door Frames Flush Covers Catalog Number Door Size H x W in. (mm) Fits Box Size H x W in. (mm) AFDF0606P 3.00 x 3.00 (76 x 76) 6.00 x 6.00 (152 x 152) AFDF1212P 9.00 x 9.00 (229 x 229) 12.00 x 12.00 (305 x 305) AFDF1812P 15.00 x 9.00 (381 x 229) 18.00 x 12.00 (457 x 305) AFDF1818P 15.00 x 15.00 (381 x 381) 18.00 x 18.00 (457 x 457) AFDF2418P 21.00 x 15.00 (533 x 381) 24.00 x 18.00 (610 x 457) AFDF2424P 21.00 x 21.00 (533 x 533) 24.00 x 24.00 (610 x 610) AFDF3024P 27.00 x 21.00 (686 x 533) 30.00 x 24.00 (762 x 610) Catalog Number Fits Box Size H x W in. (mm) AFE6X6 AFE8X6 AFE8X8 AFE10X8 AFE12X8 AFE10X10 AFE12X12 AFE18X12 AFE18X18 AFE24X18 AFE24X24 6.00 x 6.00 (152 x 152) 1 8.00 x 6.00 (203 x 152) 8.00 x 8.00 (203 x 203) 10.00 x 8.00 (254 x 203) 12.00 x 8.00 (305 x 203) 10.00 x 10.00 (254 x 254) 12.00 x 12.00 (305 x 305) 18.00 x 12.00 (457 x 305) 18.00 x 18.00 (457 x 457) 24.00 x 18.00 (610 x 457) 24.00 x 24.00 (610 x 610) Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 9 Bulletin A90P1 Boxes, Type 1 Screw-Cover Pull Box, Type 1, Accessories Type 1 Locking Window Pull Box Accessory Catalog Number Frame Size H x W in. (mm) 9.00 x 9.00 (229 x 293) ALDF88W ALDF1212W 13.00 x 13.00 (330 x 330) 10 Dead Front Panel Size H x W in. (mm) 6.00 x 6.14 (152 x 99) 10.00 x 10.14 (254 x 200) Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin A90P1 Locking Integrated Perforated Screw-Cover Pull Boxes, Type 1 Panel Enclosure, Type 1 1 Industry Standards UL 50, 50E Listed; Type 1; File No. E27567 cUL Listed per CSA C22.2 No 40; Type 1; File No. E27567 NEMA/EEMAC Type 1 IEC 60529, IP30 Reading Catalog Numbers A 12 12 H W Catalog Number A12126T1PP A16126T1PP A2016AT1PP A2420AT1PP A3624AT1PP A3630AT1PP 6 D T1 PP Panel Size D x E in. (mm) Mounting Holes G x H Knockout Pattern Knockout Pattern B-Sides in. (mm) A-Sides 10.25 x 10.25 (260 x 260) 14.25 x 10.25 (362 x 260) 17.00 x 14.50 (432 x 368) 21.00 x 18.50 (533 x 470) 32.00 x 22.50 (813 x 572) 32.00 x 31.50 (813 x 800) 9.00 x 11.00 (229 x 279) 13.00 x 11.00 (330 x 279) 17.88 x 11.00 (454 x 279) 21.88 x 15.00 (556 x 381) 33.50 x 16.75 (851 x 425) 33.50 x 22.75 (851 x 578) C-D-E-F-G B-C-D-E-F-G-H A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I — — Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products C-D-E-F-G C-D-E-F-G B-C-D-E-F-G-H A-B-C-D-E-F-G-H-I — — 11 Bulletin PNLP A90P1 Type 1 Pull Box Perforated Panel Screw-Cover Pull Boxes, Type 1 Panel mounts with pull box mounting means Attach to pull box at bonding emboss to hold panel in place temporarily until box is mounted Panel grounding hole to terminate equipment grounding conductor Catalog Number Panel Gauge Panel Size D x E (in.) Panel Size D x E (mm) PB66PP PB88PP PB1212PP PB1818PP PB2424PP 16 4.40 x 5.50 112 x 140 16 6.40 x 7.50 163 x 191 16 10.40 x 11.50 264 x 292 16 16.40 x 17.50 417 x 445 16 22.40 x 23.50 569 x 597 Fits Pull Box Fits Hinged Cover Cutout Box ASE6X6X__ ASE8X8X__ ASE12X12X__ ASE18X18X__ ASE24X24X__ AHE6X6X__ AHE8X8X__ AHE12X12X__ AHE18X18X__ AHE14X14X__ PB1818PP and PB2424PP have flange on all four sides. 12 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin A90P1 Screw-Cover Pull Boxes, Type T1FLO® Vented Enclosure with1Fan, Type 1 1 Industry Standards UL 508A Listed; Type 1; File No. E61997 cUL Listed per CSA C22.2 No. 94; Type 1; File No. E61997 NEMA/EEMAC Type 1 IEC 60529, IP20 Catalog Number T1F80LP T1F130LP T1F200LP T1F350LP AxBxC in. (mm) Suggested HP 28.00 x 24.00 x 12.75 (711 x 610 x 324) 34.00 x 24.00 x 12.75 (864 x 610 x 324) 40.00 x 24.00 x 12.75 (1016 x 610 x 324) 54.00 x 30.00 x 12.75 (1372 x 762 x 324) 3 A24P24 Solid Panel A24P24PP Up to 20 A30P24 A30P24PP 40 A36P24 A36P24PP Up to 75 A48P30 — Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Perforated Panel 13 Bulletin A90P1 Hinged-Cover Cutout Boxes Industry Standards UL 50, 50E Listed; Type 1; File No. E27567 cUL Listed per CSA C22.2 No 40; Type 1; File No. E27567 NEMA/EEMAC Type 1 CSA, File 42184: Type 1 IEC 60529, IP30 Reading Catalog Numbers AHE 10 H X 8 W X 6 D Hinged-Cover, Type 1 Catalog Number AHE6X4X4 AHE6X6X4 AHE8X6X4 AHE8X8X4 AHE10X8X4 AHE10X10X4 AHE12X8X4 AHE12X10X4 AHE12X12X4 AHE16X12X4 AHE18X12X4 14 Knockout Pattern along “H” Sides Knockout Pattern along “W” Sides B-C-D B-C B-C-D B-C-D F-G-H-I B-C-D F-G-H-I F-G-H-I F-G-H-I F-G-H-I F-G-H-I C-D-E-F-G C-D-E-F-G F-G-H-I C-D-E-F-G C-D-E-F-G C-D-E-F-G C-D-E-F-G B-C-D-E-F-G-H C-D-E-F-G A-B-C-D-E-F-G-H-I C-D-E-F-G Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin A90P1 Hinged-Cover Cutout Boxes Hinged-Cover, Type 1 (Cont.) Catalog Number AHE6X6X6 AHE8X8X6 AHE10X8X6 AHE10X10X6 AHE12X10X6 AHE12X12X6 AHE16X12X6 AHE16X16X6 AHE18X12X6 AHE18X18X6 AHE24X18X6 AHE24X24X6 AHE30X24X6 AHE36X24X6 AHE36X24X8 Knockout Pattern along “H” Sides Knockout Pattern along “W” Sides B-C-D B-C-D F-G-H-I F-G-H-I F-G-H-I F-G-H-I F-G-H-I C-D-E-F-G C-D-E-F-G C-D-E-F-G C-D-E-F-G C-D-E-F-G B-C-D-E-F-G-H C-D-E-F-G B-C-D-E-F-G-H B-C-D-E-F-G-H A-B-C-D-E-F-G-H-I C-D-E-F-G A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I A-B-C-D-E-F-G-H-I Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 1 15 Bulletin a1sm Hinged-Cover, Type 1 Industry Standards UL 50, 50E Listed; Type 1; File No. E27567 cUL Listed per CSA C22.2 No 40; Type 1; File No. E27567 NEMA/EEMAC Type 1 CSA, File 42184: Type 1 IEC 60529, IP30 Reading Catalog Numbers A 10 H N 10 W 4 D Small, Type 1 a Catalog Number Panela Perforated Panela Catalog Number Panela Perforated Panela A6N64 A8N64 A8N84 A10N84 A10N104 A12N104 A12N124 A14N124 A8N66 A8N86 A6N6P A8N6P A8N8P A10N8P A10N10P A12N10P A12N12P A14N12P A8N6P A8N8P A6N6PP A8N6PP A8N8PP A10N8PP A10N10PP A12N10PP A12N12PP A14N12PP A8N6PP A8N8PP A10N86 A10N106 A10N8P A10N10P A10N8PP A10N10PP A12N106 A12N126 A14N126 A16N126 A20N126 A12N128 A14N128 A12N10P A12N12P A14N12P A16N12P A20N12P A12N12P A14N12P A12N10PP A12N12PP A14N12PP A16N12PP A20N12PP A12N12PP A14N12PP Purchase panels separately. 16 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin a1m Hinged-Cover, Type 1 Industry Standards UL 50, 50E Listed; Type 1; File No. E27567 cUL Listed per CSA C22.2 No 40; Type 1; File No. E27567 NEMA/EEMAC Type 1 CSA, File 42184: Type 1 IEC 60529, IP30 Reading Catalog Numbers 16 H N 12 W ALP D { A A = 6.62 in. B = 8.62 in. C = 10.62 in. D = 12.62 in. Medium, Type 1 Catalog Number Panel Cataloga Perforated Panela Catalog Number Panel Cataloga Perforated Panela A16N12ALP A16N16ALP A16N20ALP A20N16ALP A20N20ALP A24N16ALP A24N20ALP A24N24ALP A30N24ALP A36N24ALP A36N30ALP A16N12BLP A20N12BLP A20N16BLP A16N12MP A16N16MP A16N20MP A20N16MP A20N20MP A24N16MP A24N20MP A24N24MP A30N24MP A36N24MP A36N30MP A16N12MP A20N12MP A20N16MP A16N12MPP A16N16MPP A16N20MPP A20N16MPP A20N20MPP A24N16MPP A24N20MPP A24N24MPP* A30N24MPP* A36N24MPP* A36N30MPP* A16N12MPP A20N12MPP A20N16MPP A20N20BLP A24N20BLP A24N24BLP A30N20BLP A30N24BLP A30N30BLP A36N24BLP A36N30BLP A18N18CLP A24N20CLP A30N24CLP A24N24DLP A30N24DLP A36N30DLP A20N20MP A24N20MP A24N24MP A30N20MP A30N24MP A30N30MP A36N24MP A36N30MP A18N18MP A24N20MP A30N24MP A24N24MP A30N24MP A36N30MP A20N20MPP A24N20MPP A24N24MPP* A30N20MPP* A30N24MPP* A30N30MPP* A36N24MPP* A36N30MPP* A18N18MPP A24N20MPP A30N24MPP A24N24MPP* A30N24MPP* A36N30MPP* a Purchase panels separately. *Flanged on all four sides. Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 17 1 Bulletin A1L Hinged-Cover, Type 1 Industry Standards UL 50, 50E Listed; Type 1; File No. E27567 cUL Listed per CSA C22.2 No 40; Type 1; File No. E27567 NEMA/EEMAC Type 1 CSA, File 42184: Type 1 IEC 60529, IP30 Large, Type 1 Catalog Number Panela A42N3009 A42N3609 A48N3609 A48N3611 A42N3013 A42N3613 A48N3613 A48N3617 A42P30 A42P36 A48P36 A48P36 A42P30 A42P36 A48P36 A48P36 Reading Catalog Numbers A 42 H N 30 09 W D Purchase panels separately. Optional aluminum panels are available for most sizes. a Purchase enclosure Mounting Bracket Kit accessory (AMFLN1) separately. 18 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin A3RD WEATHERFLO® with Fan, Type 3R 2 Industry Standards UL 508A Listed; Type 3R; File Number E61997 cUL Listed per CSA C22.2 No 94; Type 3R; File Number E61997 NEMA/EEMAC Type 3R IEC 60529, IP32 Catalog Number WF3LP WF10LP WF25LP WF40LP WF75LP WF100LP a Enclosure Size H x W x D in. (mm) 29.00 x 24.00 x 12.00 (737 x 610 x 305) 35.00 x 24.00 x 12.00 (889 x 610 x 305) 41.00 x 24.00 x 12.00 (1041 x 610 x 305) 47.00 x 24.00 x 14.00 (1194 x 610 x 356) 55.00 x 36.00 x 16.00 (1397 x 914 x 406) 67.00 x 36.00 x 16.00 (1702 x 914 x 706) Panela System CFM A24P24 75 A30P24 160 A36P24 160 A42P24 200 A48P36 400 A60P36 500 Purchase panels separately. Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 19 Bulletin a90rh Horizontal-Mount, Type 3R Reading Catalog Numbers A 12 H R Catalog Number A8R84HM A10R104HM A12R126HM A24R206HM 20 12 W 6 D Industry Standards Maintains Type 3R rating when mounted horizontally. Maintains Type 1 rating when mounted vertically. UL 50, 50E Listed; Type 3R; File No. E27525 cUL Listed per CSA C22.2 No 94; Type 3R; File No. E27525 NEMA/EEMAC Type 3R IEC 60529, IP32 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin a90s3 Screw-Cover, Type 3R Industry Standards UL 50, 50E Listed; Type 3R; File No. E27525 cUL Listed per CSA C22.2 No 94; Type 3R; File No. E27525 NEMA/EEMAC Type 3R IEC 60529, IP32 2 Reading Catalog Numbers A 12 H R 10 W 4 D With Knockouts Catalog Number Body Style Knockout Pattern A4R44 A6R44 A12R44 A6R64 A8R64 A8R84 A10R84 A12R84 A10R104 A12R104 A12R124 A18R124 A18R184 A B-C A B-C A B-C A B-C-D A B-C-D A F-G-H-I A F-G-H-I A F-G-H-I A C-D-E-F-G A C-D-E-F-G A C-D-E-F-G A C-D-E-F-G B A-B-C-D-E-F-G-H-I Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 21 Bulletin a90s3 a90rh Screw-Cover, Type 3R Horizontal-Mount, Type 3R With Knockouts (Cont.) Catalog Number Body Style Knockout Pattern A6R66 A8R86 A10R86 A10R106 A12R86 A12R106 A12R126 A15R126 A16R126 A18R126 A18R186 A24R126 A24R186 A24R246 A8R88 A12R128 A15R128 A18R128 A24R168 A18R188 A24R188 A24R208 A24R248 A30R248 A48R368 A18R1810 A24R1810 A24R2410 A30R2410 A B-C-D A F-G-H-I A F-G-H-I A C-D-E-F-G A F-G-H-I A C-D-E-F-G A C-D-E-F-G A C-D-E-F-G A C-D-E-F-G A C-D-E-F-G B A-B-C-D-E-F-G-H-I B C-D-E-F-G B A-B-C-D-E-F-G-H-I B A-B-C-D-E-F-G-H-I A F-G-H-I A C-D-E-F-G A C-D-E-F-G A C-D-E-F-G B C-D-E-F-G B A-B-C-D-E-F-G-H-I B A-B-C-D-E-F-G-H-I B A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I B B A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I 22 A-B-C-D-E-F-G-H-I Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin a90s3 Screw-Cover, Type 3R With Knockouts (Cont.) Catalog Number Body Style A24R2412 A30R3012 A36R3012 A36R3612 A30R3016 A48R3616 C Knockout Pattern A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 2 23 Bulletin a90s3 Screw-Cover, Type 3R Industry Standards UL 50, 50E Listed; Type 3R; File No. E27525 cUL Listed per CSA C22.2 No 94; Type 3R; File No. E27525 NEMA/EEMAC Type 3R IEC 60529, IP32 Reading Catalog Numbers A 12 H Without Knockouts R 12 W Catalog Number Body Style Catalog Number Body Style A4R44NK A6R64NK A8R64NK A8R84NK A10R84NK A12R84NK A10R104NK A12R104NK A12R124NK A18R184NK A6R66NK A18R66NK A8R86NK A10R86NK A10R106NK A12R106NK A12R126NK A15R126NK A16R126NK A18R126NK A A18R186NK A24R186NK A24R246NK A8R88NK A24R88NK A12R128NK A15R128NK A18R128NK A18R188NK A24R188NK A24R208NK A24R248NK A30R248NK A48R368NK A24R2410NK A24R2412NK A30R3012NK A36R3012NK A36R3612NK A30R3016NK A48R3616NK B 24 A A A A A A A A B A A A A A A A A A A 4 D NK B B A A A A A B B B C C C C C C C C C C Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin a90s3 Screw-Cover, Type 3R Body Style A 2 Body Style B Body Style C Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 25 Bulletin A90g3 Screw-Cover Galvanized, Type 3R Industry Standards UL50, 50E Listed; Type 3R; File No. E27525 cUL Listed per CSA C22.2 No 94; Type 3R; File No. E27525 NEMA/EEMAC Type 3R IEC 60529, IP32 Reading Catalog Numbers A 12 H R 12 W 4 D GV Catalog Number Body Style Knockout Pattern A4R44GV A6R64GV A8R84GV A10R104GV A12R124GV A6R66GV A8R86GV A10R106GV A12R126GV A18R186GV A8R88GV A8R88GVNK A10R108GVNK A12R128GV A24R248GV A24R2410GV A B-C A B-C A B-C-D A C-D-E-F-G A C-D-E-F-G A B-C-D A F-G-H-I A C-D-E-F-G A C-D-E-F-G B A-B-C-D-E-F-G-H-I A F-G-H-I A — A — A C-D-E-F-G C A-B-C-D-E-F-G-H-I C A-B-C-D-E-F-G-H-I 26 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin A90g3 Screw-Cover Galvanized, Type 3R Body Style A 2 Body Style B Body Style C Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 27 Bulletin a90gs Screw-Cover Gasketed, Type 3 Industry Standards UL 508A Listed; Type 3, 12; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 3, 12; File No. E61997 NEMA/EEMAC Type 3 and 12 (except for mounting provisions) CSA, File 42184: Type 4 and 12 IEC 60529, IP66 Reading Catalog Numbers A 6 H 6 W 4 D GSC Catalog Number Catalog Number A664GSC A864GSC A884GSC A1084GSC A10104GSC A12124GSC A666GSC A886GSC A888GSC A10108GSC A12128GSC A16168GSC A20208GSC A24208GSC A24248GSC A30248GSC A242410GSC A121212GSC A161612GSC A202012GSC A242412GSC A303012GSC A363612GSC A10106GSC A12106GSC A12126GSC A16126GSC A16166GSC A18186GSC A20166GSC A24246GSC 28 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin a3sm Hinged-Cover Small , Type 3R Industry Standards UL 50, 50E Listed; Type 3R; File No. E27567 cUL Listed per CSA C22.2 No 94; Type 3R File No. E27567 NEMA/EEMAC Type 3R IEC 60529, IP32 2 Reading Catalog Numbers A Catalog Number A6R44HCR A6R64HCR A8R64HCR A8R86HCR A10R86HCR A12R106HCR A12R126HCR A12R1210HCR a A6N4P Perforated Panela — A6N6P A6N6PP A8N6P A8N6PP A8N8P A8N8PP A10N8P A10N8PP A12N10P A12N10PP A12N12P A12N12PP A12N12P A12N12PP Panela 6 H R 6 W 4 D HCR Purchase panels separately. Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 29 Bulletin a3m Hinged-Cover Medium, Type 3R Industry Standards UL 50, 50E Listed; Type 3R; File No. E27567 cUL Listed per CSA C22.2 No 94; Type 3R File No. E27567 NEMA/EEMAC Type 3R IEC 60529, IP32 Reading Catalog Numbers A 16 H Catalog Number R 12 W 6 D HCR Panela Perforated Panela Catalog Number A16R126HCR A16R166HCR A18R186HCR A20R166HCR A20R208HCR A24R208HCR A24R248HCR A30R248HCR A30R308HCR A18R1810HCR A24R2410HCR A30R2410HCR A16P12 A16P12PP A16P16 A16P16PP A18P18 A18P18PP A20P16 A20P16PP A20P20 A20P20PP A24P20 A24P24 A24P20PP A24P24PP* A30P24 A30P24PP* A30P30 A30P30PP* A18P18 A24P24 A18P18PP A24P24PP* A30R3012HCR A36R2412HCR A36R3012HCR A36R3612HCR A42R3012HCR A42R3612HCR A48R3612HCR A60R3612HCR A30R3016HCR A48R3616HCR A30P24 A30P24PP* A36R3610HCR A36P36 A36P36PP* 30 Panela A30P30 Perforated Panela A30P30PP* A36P24 A36P24PP* A36P30 A36P30PP* A36P36 A36P36PP* A42P30 — A42P36 — A48P36 — A60P36 A30P30 — A30P30PP* A48P36 — Purchase panels separately. *Flanged on all four sides. a Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin a3lo Hinged-Cover Lift-Off, Type 3R Industry Standards UL 50, 50E Listed; Type 3R; File No. E27567 cUL Listed per CSA C22.2 No 94; Type 3R File No. E27567 NEMA/EEMAC Type 3R CSA, File 42184: Type 3R 2 IEC 60529, IP32 Reading Catalog Numbers A 16 H R 12 W 6 D HCLO Catalog Number Panela Panel Mounting Kitb Mounting Bracket Kitb A8R64HCLO A8R86HCLO A10R86HCLO A12R106HCLO A12R126HCLO A16R126HCLO A16R166HCLO A20R166HCLO A20R208HCLO A24R208HCLO A24R248HCLO A30R248HCLO A6P6 A8P6 A8P8 A10P10 A12P10 A14P12 A16P16 A20P16 A20P20 A24P20 A24P24 A30P24 APMK3RLO16 APMK3RLO16 APMK3RLO16 APMK3RLO16 APMK3RLO16 APMK3RLO16 APMK3RLO14 APMK3RLO14 APMK3RLO14 APMK3RLO14 APMK3RLO14 APMK3RLO14 AMFK3RLO16 AMFK3RLO16 APMK3RLO16 AMFK3RLO16 AMFK3RLO16 AMFK3RLO16 AMFK3RLO14 AMFK3RLO14 AMFK3RLO14 AMFK3RLO14 AMFK3RLO14 AMFK3RLO14 Purchase panels separately. Order Panel Mounting Kit and Mounting Bracket Kit separately. (A Panel Mounting Kit must be ordered to install panel.) a b Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 31 Bulletin a3m WEATHERPRO® Outdoor Pad-Mount, Type 3R Industry Standards UL 508A Listed; Type 3R; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 3R; File No. E61997 NEMA/EEMAC Type 3R IEC 60529, IP32 Reading Catalog Numbers A 60 H R 28 18 FSLP W D Single-Door Catalog Number Panel A60R2518FSLP A60R2524FSLP A72R2518FSLP A60R3618FSLP A72R3618FSLP A72R3624FSLP A49P21N A49P21N A61P21N A49P32N A61P32N A61P32N Purchase panels separately. 32 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin a3lo WEATHERPRO® Outdoor Pad-Mount, Type 3R Industry Standards UL 508A Listed; Type 3R; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 3R; File No. E61997 NEMA/EEMAC Type 3R IEC 60529, IP32 2 Reading Catalog Numbers A 60 H R 52 18 FSLP W D Two-Door Catalog Number Panel A60R5218FSLP A60R5224FSLP A60R7224FSLP A72R7218FSLP A72R7224FSLP A49P48N A49P48N A49P68N A61P68N A61P68N Purchase panels separately. Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 33 Bulletin t90 Telephone Cabinet, Type 1 Industry Standards UL 50, 50E Listed; Type 1; File No. E27567 cUL Listed per CSA C22.2 No 40; Type 1; File No. E27567 NEMA/EEMAC Type 1 IEC 60529, IP30 Catalog Number ATC10104S ATC10104F ATC12124S ATC12124F ATC18124S ATC18124F ATC18184S ATC18184F ATC24184S ATC24184F ATC24244S ATC24244F Mounted Surface Flush Surface Flush Surface Flush Surface Flush Surface Flush Surface Flush Catalog Number ATC30244S ATC30244F ATC30304S ATC36244S ATC36244F ATC36364S ATC36364F ATC12126S ATC12126F ATC18126S ATC18126F ATC18186S Mounted Surface Flush Surface Surface Flush Surface Flush Surface Flush Surface Flush Surface 3/4-inch-thick plywood panel included. 34 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin t90 Telephone Cabinet, Type 1 Reading Catalog Numbers 12 12 H W Catalog Number ATC18186F ATC24186S ATC24186F ATC24246S ATC24246F ATC30246F ATC30306S ATC30306F ATC36246S ATC36246F ATC36306S ATC36306F ATC36366S ATC36366F ATC36308S ATC36308F 4 D S { ATC S = Surface F = Flush Mounted 3 Flush Surface Flush Surface Flush Flush Surface Flush Surface Flush Surface Flush Surface Flush Surface Flush Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 35 Bulletin t90R3 T3-Box Telephone Cabinet, Type 3R Industry Standards UL 50, 50E Listed; Type 3R; File No. E27567 UL 497 / 1863 Listed; File No. E230874 cUL Listed per CSA C22.2 No 94; Type 3R; File No. E27567 NEMA Type 3R IEC 60529 IP32 Reading Catalog Numbers ATC 12 H R 14 W 5 D Catalog Number Door Conduit Pattern ATC12R145 ATC36R366 ATC26R248 ATC36R248 ATC36R308 ATC36R369 ATC42R369 ATC48R369 ATC48R489 ATC36R3612 Single Single G-H-I C-D-E-F-G-H-I-J-K-L-M Single E-F-G-H-I-J-K Single E-F-G-H-I-J-K Single D-E-F-G-H-I-J-K-L Single C-D-E-F-G-H-I-J-K-L-M Double C-D-E-F-G-H-I-J-K-L-M Double C-D-E-F-G-H-I-J-K-L-M Double Single A-B-C-D-E-F-G-H-I-J-K-L-M-N-O C-D-E-F-G-H-I-J-K-L-M 3/4-inch-thick plywood panel included. 36 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin t90R3 T3-Box Telephone Cabinet, Type 3R 3 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 37 Bulletin s90b3 Terminal Box, Type 3R Industry Standards UL 1773 Listed; Type 3R; File No. E256098 UL 50, 50E Listed; Type 3R; File No. E27525 cUL Listed per CSA C22.2 No 94; Type 3R; File No. E27525 NEMA/EEMAC Type 3R IEC 60529, IP32 Catalog Number TB3R101 TB3R103 TB3R103240 TB3R201 TB3R203 TB3R203240 TB3R401 TB3R403 38 A x B x C in. (mm) Volts Amps Number of Bars 18.00 x 10.75 x 4.50 (457 x 273 x 114) 18.00 x 10.75 x 4.50 (457 x 273 x 114) 18.00 x 10.75 x 4.50 (457 x 273 x 114) 23.00 x 14.00 x 4.50 (584 x 356 x 114) 23.00 x 14.00 x 4.50 (584 x 356 x 114) 23.00 x 14.00 x 4.50 (584 x 356 x 114) 27.00 x 20.50 x 6.00 (686 x 521 x 152) 27.00 x 20.50 x 6.00 (686 x 521 x 152) 120/240 100 3 600 100 4 120/240 100 4 120/240 200 3 600 200 4 120/240 200 4 120/240 400 3 600 400 4 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin s90b3 Terminal Box, Type 3R, Accessories Interchangeable Bolt-On Hub Catalog Number Fits Conduit Size (in.) Fits Conduit Size (mm) TBHUB10 TBHUB12 TBHUB15 TBHUB20 TBHUB25 1.00 25 1.25 32 1.50 38 2.00 51 2.50 64 Lug Assembly Catalog Number Wire Range TBL100 TBL200 TBL400 (6) #14-2/0 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 4 (6) #6-350 MCM (6) #4-600 MCM 39 Bulletin f40g Lay-In Galvanized Wireway, NEMA Type 1 Industry Standards UL 870 Listed; File No. E27524 cUL Listed per CSA C22.2 No. 26; File No. E27524 NEMA/EEMAC: Type 1 IEC 60529, IP30 Description 12.00-in. (305-mm) Straight Section with knockouts 12.00-in. (305-mm) Straight Section without knockouts 18.00-in. (455-mm) Straight Section with knockouts 18.00-in. (455-mm) Straight Section without knockouts 24.00-in. (610-mm) Straight Section with knockouts 24.00-in. (610-mm) Straight Section without knockouts 36.00-in. (914-mm) Straight Section with knockouts 36.00-in. (914-mm) Straight Section without knockouts 48.00-in. (1219-mm) Straight Section with knockouts 48.00-in. (1219-mm) Straight Section without knockouts 60.00-in. (1524-mm) Straight Section with knockouts 60.00-in. (1524-mm) Straight Section without knockouts 72.00-in. (1829-mm) Straight Section with knockouts 72.00-in. (1829-mm) Straight Section without knockouts 120.00-in. (3048-mm) Straight Section with knockouts 120.00-in. (3048-mm) Straight Section without knockouts 40 2.50 x 2.50 in. 64 x 64 mm 4.00 x 4.00 in. 102 x 102 mm — F22T112GV — — F22T124GVWK F22T124GV F22T136GVWK F22T136GVWK — F22T148GV F22T160GVWK F22T160GV — — F22T1120GVWK F22T1120GV F44T112GVWK F44T112GV — F44T118GV F44T124GVWK F44T124GV F44T136GVWK F44T136GV F44T148GVWK F44T148GV F44T160GVWK F44T160GV F44T172GVWK F44T172GV F44T1120GVWK F44T1120GV Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin f40g Lay-In Galvanized Wireway, NEMA Type 1 6.00 x 6.00 in. 152 x 152 mm 8.00 x 8.00 in. 203 x 203 mm 10.00 x 10.00 in. 254 x 254 mm 12.00 x 12.00 in. 305 x 305 mm F66T112GVWK F66T112GV — F66T118GV F66T124GVWK F66T124GV F66T136GVWK F66T136GV F66T148GVWK F66T148GV F66T160GVWK F66T160GV F66T172GVWK F66T172GV F66T1120GVWK F66T1120GV F88T112GVWK F88T112GV — F88T118GV F88T124GVWK F88T124GV F88T136GVWK F88T136GV F88T148GVWK F88T148GV F88T160GVWK F88T160GV F88T172GVWK F88T172GV F88T1120GVWK F88T1120GV — F1010T112GV — — — F1010T124GV — F1010T136GV — F1010T148GV — F1010T160GV — F1010T172GV — F1010T1120GV — F1212T112GV — — — F1212T124GV — F1212T136GV — F1212T148GV — F1212T160GV — — — F1212T1120GV Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 5 41 Bulletin f40g F40GF Lay-In Galvanized Wireway, NEMA Type 1 Description 90° Elbow 90° Elbow Inside Opening 90° Elbow Outside Opening 45° Elbow Telescope Fitting Panel Adapter Closure Plate with knockouts Closure Plate without knockouts Reducer Drop and Bracket Hanger Support Hanger Universal U-Connector 42 2.50 x 2.50 in. 64 x 64 mm 4.00 x 4.00 in. 102 x 102 mm F2290EGV F2290EINGV F2290EOUTGV F2245EGV F22GAGV F22GPAGV F22GCPGV F22GCPNKGV — F4490EGV F4490EINGV F4490EOUTGV F4445EGV F44GAGV F44GPAGV F44GCPGV F44GCPNKGV F44G22R F22GDB F22GSHGV F22GUCGV F44GDB F44GSHGV F44GUCGV Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin f40g F40GF Lay-In Galvanized Wireway, NEMA Type 1 6.00 x 6.00 in. 152 x 152 mm 8.00 x 8.00 in. 203 x 203 mm 10.00 x 10.00 in. 254 x 254 mm 12.00 x 12.00 in. 305 x 305 mm F6690EGV F6690EINGV F6690EOUTGV F6645EGV F66GAGV F66GPAGV F66GCPGV F66GCPNKGV F66G44R F8890EGV F8890EINGV F8890EOUTGV F8845EGV F88GAGV F88GPAGV F88GCPGV F88GCPNKGV F88G66R F101090EGV F101090EINGV F101090EOUTGV F101045EGV F1010GAGV F1010GPAGV — F1010GCPNKGV F1010G88R F66GDB F66GSHGV F66GUCGV F88GDB F88GSHGV F88GUCGV F1010GDB F1010GSHGV F1010GUCGV F121290EGV F121290EINGV F121290EOUTGV F121245EGV F1212GAGV F1212GPAGV F1212GCPGV F1212GCPNKGV F1212G88R F1212G1010R F1212GDB F1212GSHGV F1212GUCGV 5 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 43 Bulletin f40fc Lay-In Painted Flat-Cover Wireway, NEMA Type 1 Industry Standards UL 870 Listed; File No. E27524 cUL CSA C22.2 No. 26 Listed; File No. E27524 NEMA/EEMAC Type 1 IEC 60529 Description 2.50 x 2.50 in. 64 x 64 mm 3.00 x 3.00 in. 76 x 76 mm 12.00-in. (305-mm) Straight Section with knockouts F22T112GVPWK — 12.00-in. (305-mm) Straight Section without knockouts F22T112GVP — 18.00-in. (455-mm) Straight Section without knockouts — — 24.00-in. (610-mm) Straight Section with knockouts F22T124GVPWK — 24.00-in. (610-mm) Straight Section without knockouts F22T124GVP — 36.00-in. (914-mm) Straight Section with knockouts F22T136GVPWK — 36.00-in. (914-mm) Straight Section without knockouts F22T136GVP — 48.00-in. (1219-mm) Straight Section with knockouts F22T148GVPWK — 48.00-in. (1219-mm) Straight Section without knockouts F22T148GVP — 60.00-in. (1524-mm) Straight Section with knockouts F22T160GVPWK — 60.00-in. (1524-mm) Straight Section without knockouts F22T160GVP F33T160GVP 72.00-in. (1829-mm) Straight Section with knockouts — — 72.00-in. (1829-mm) Straight Section without knockouts — — 120.00-in. (3048-mm) Straight Section with knockouts F22T1120GVPWK — 120.00-in. (3048-mm) Straight Section without knockouts F22T1120GVP F33T1120GVP 44 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin f40fc Lay-In Painted Flat-Cover Wireway, NEMA Type 1 4.00 x 4.00 in. 102 x 102 mm 6.00 x 6.00 in. 152 x 152 mm 8.00 x 8.00 in. 203 x 203 mm 10.00 x 10.00 in. 254 x 254 mm 12.00 x 12.00 in. 305 x 305 mm F44T112GVPWK F66T112GVPWK F44T112GVP F66T112GVP F88T112GVPWK — F1212T112GVPWK F88T112GVP F1010T112GVP F44T118GVP F1212T112GVP F66T118GVP F88T118GVP — F1212T118GVPWK F44T124GVPWK F66T124GVPWK F88T124GVPWK — F1212T124GVPWK F44T124GVP F66T124GVP F88T124GVP F1010T124GVP F1212T124GVP F44T136GVPWK F66T136GVPWK F88T136GVPWK — F1212T136GVPWK F44T136GVP F66T136GVP F88T136GVP F1010T136GVP F1212T136GVP F44T148GVPWK F66T148GVPWK F88T148GVPWK — F1212T148GVPWK F44T148GVP F66T148GVP F88T148GVP F1010T148GVP F1212T148GVP F44T160GVPWK F66T160GVPWK F88T160GVPWK — F1212T160GVPWK F44T160GVP F66T160GVP F88T160GVP F1010T160GVP F1212T160GVP F44T172GVPWK F66T172GVPWK — — — F44T172GVP F66T172GVP F88T172GVP F1010T172GVP — F44T1120GVPWK F66T1120GVPWK F88T1120GVP — — F44T1120GVP F66T1120GVP F88T1120GVP F1010T1120GVP F1212T1120GVP Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 45 5 Bulletin f40fc F40PF Lay-In Painted Flat-Cover Wireway, NEMA Type 1 Description 90° Flush Tee Sweep Tee Cross Fitting 90° Sweep Elbow 90° Elbow-Tee-Cross 90° Elbow 90° Elbow Outside Opening 90° Elbow Inside Opening 45° Elbow Telescope Fitting Open Adapter Panel Adapter Closure Plate with knockouts Closure Plate without knockouts Reducer Drop and Bracket Hanger Support Hanger Universal U-Connector Barrier Kit, bolt-on Each barrier 60.00 in. (1524 mm) 46 2.50 x 2.50 in. 64 x 64 mm 3.00 x 3.00 in. 76 x 76 mm F22GT F22T F22X F22G90SE F22G90TX F22G90E F2290EOUT F2290EIN F22G45E F22GAa F22GOA F22GPA F22GCP F22GCPNK — F33GT — — — F33G90TX F33G90E — — F33G45E — — F33GPA — F33GCPNK F33G22R F22GDB F22GSH F22GUC — — — F33GUC F33BK60 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin f40fc F40PF Lay-In Painted Flat-Cover Wireway, NEMA Type 1 4.00 x 4.00 in. 102 x 102 mm 6.00 x 6.00 in. 152 x 152 mm 8.00 x 8.00 in. 203 x 203 mm 10.00 x 10.00 in. 254 x 254 mm 12.00 x 12.00 in. 305 x 305 mm F44GT F44T F44X F44G90SE F44G90TX F44G90E F4490EOUT F4490EIN F44G45E F44GAa F44GOA F44GPA F44GCP F44GCPNK F44G22R F44G33R F44GDB F44GSH F44GUC F44BK60 F66GT F66T F66X F66G90SE F66G90TX F66G90E F6690EOUT F6690EIN F66G45E F66GAa F66GOA F66GPA F66GCP F66GCPNK F66G44R F88GT F88T F88X F88G90SE F88G90TX F88G90E F8890EOUT F8890EIN F88G45E F88GAa F88GOA F88GPA F88GCP F88GCPNK F88G66R F1010GT F1010T F1010X F1010G90SE F1010G90TX F1010G90E F101090EOUT F101090EIN F1010G45E F1010GAa F1010GOA F1010GPA F1010GCP F1010GCPNK F1010G88R F66GDB F66GSH F66GUC F66BK60 F88GDB F88GSH F88GUC F88BK60 F1010GDB F1010GSH F1010GUC — F1212GT F1212T F1212X F1212G90SE F1212G90TX F1212G90E F121290EOUT F121290EIN F1212G45E F1212GAa F1212GOA F1212GPA F1212GCP F1212GCPNK F1212G88R F1212G1010R F1212GDB F1212GSH F1212GUC — Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 5 47 Bulletin f40 Lay-In Hinged-Cover Wireway, NEMA Type 1 Industry Standards UL 870 Listed; File No. E27524 cUL CSA C22.2 No. 26 Listed; File No. E27524 NEMA/EEMAC Type 1 IEC 60529, IP30 Description 2.50 x 2.50 in. 64 x 64 mm 4.00 x 4.00 in. 102 x 102 mm 12.00-in. (305-mm) Straight Section with knockouts F22G12WK F44G12WK 12.00-in. (305-mm) Straight Section without knockouts F22G12 F44G12 18.00-in. (455-mm) Straight Section without knockouts — F44G18 24.00-in. (610-mm) Straight Section with knockouts F22G24WK F44G24WK 24.00-in. (610-mm) Straight Section without knockouts F22G24 F44G24 36.00-in. (914-mm) Straight Section with knockouts F22G36WK F44G36WK 36.00-in. (914-mm) Straight Section without knockouts F22G36 F44G36 48.00-in. (1219-mm) Straight Section with knockouts F22G48WK F44G48WK 48.00-in. (1219-mm) Straight Section without knockouts F22G48 F44G48 60.00-in. (1524-mm) Straight Section with knockouts F22G60WK F44G60WK 60.00-in. (1524-mm) Straight Section without knockouts F22G60 F44G60 72.00-in. (1829-mm) Straight Section with knockouts — F44G72WK 72.00-in. (1829-mm) Straight Section without knockouts — F44G72 96.00-in. (2438-mm) Straight Section without knockouts — F44G96 120.00-in. (3048-mm) Straight Section with knockouts F22G120WK F44G120WK 120.00-in. (3048-mm) Straight Section without knockouts F22G120 F44G120 48 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin f40 Lay-In Hinged-Cover Wireway, NEMA Type 1 6.00 x 6.00 in. 152 x 152 mm 8.00 x 8.00 in. 203 x 203 mm 10.00 x 10.00 in. 254 x 254 mm Not Hinged 12.00 x 12.00 in. 305 x 305 mm Hinged 12.00 x 12.00 in. 305 x 305 mm F66G12WK — — — — F66G12 F88G12 F1010G12 F1212G12 F1212G12H F66G18 F88G18 — — — F66G24WK — — — — F66G24 F88G24 F1010G24 F1212G24 F1212G24H F66G36WK — — — — F66G36 F88G36 F1010G36 F1212G36 F1212G36H F66G48WK — — — — F66G48 F88G48 F1010G48 F1212G48 F1212G48H F66G60WK — — — — F66G60 F88G60 F1010G60 F1212G60 F1212G60H F66G72WK — — — — F66G72 F88G72 F1010G72 F1212G72 F1212G72H F66G96 F88G96 F1010G96 F1212G96 — F66G120WK — — — — F66G120 F88G120 F1010G120 F1212G120 F1212G120H Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 5 49 Bulletin f40 F40PF Lay-In Hinged-Cover Wireway, NEMA Type 1 Description 2.50 x 2.50 in. 64 x 64 mm 4.00 x 4.00 in. 102 x 102 mm 90° Flush Tee F22GT F44GT Sweep Tee F22T F44T Cross Fitting F22X F44X 90° Sweep Elbow F22G90SE F44G90SE 90° Elbow-Tee-Cross F22G90TX F44G90TX 90° Elbow F22G90E F44G90E 90° Elbow Outside Opening F2290EOUT F4490EOUT 90° Elbow Inside Opening F2290EIN F4490EIN 45° Elbow F22G45E F44G45E Telescope Fitting F22GAa F44GAa Open Adapter F22GOA F44GOA Panel Adapter F22GPA F44GPA Closure Plate without knockouts F22GCPNK F44GCPNK Closure Plate with knockouts F22GCP F44GCP Reducer — F44G22R Drop and Bracket Hanger F22GDB F44GDB Support Hanger F22GSH F44GSH Universal U-Connector F22GUC F44GUC Barrier Kit, bolt-on Each barrier 60.00 in. (1524 mm) — F44BK60 50 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin f40 F40PF Lay-In Hinged-Cover Wireway, NEMA Type 1 6.00 x 6.00 in. 152 x 152 mm 8.00 x 8.00 in. 203 x 203 mm 10.00 x 10.00 in. 254 x 254 mm Not Hinged 12.00 x 12.00 in. 305 x 305 mm Hinged 12.00 x 12.00 in. 305 x 305 mm F66GT F88GT F1010GT F1212GT F1212GT F66T F88T F1010T F1212T F1212T F66X F88X F1010X F1212X F1212X F66G90SE F88G90SE F1010G90SE F1212G90SE F1212G90SE F66G90TX F88G90TX F1010G90TX F1212G90TX F1212G90TX F66G90E F88G90E F1010G90E F1212G90E F1212G90E F6690EOUT F8890EOUT F101090EOUT F121290EOUT F121290EOUT F6690EIN F8890EIN F101090EIN F121290EIN F121290EIN F66G45E F88G45E F1010G45E F1212G45E F1212G45E F66GAa F88GAa F1010GAa F1212GAa F1212GAa F66GOA F88GOA F1010GOA F1212GOA F1212GOA F66GPA F88GPA F1010GPA F1212GPA F1212GPA F66GCPNK F88GCPNK F1010GCPNK F1212GCPNK F1212GCPNK F66GCP F88GCP F1010GCP F1212GCP F1212GCP F66G44R F88G66R F1010G88R F1212G88R F1212G1010R F1212G88R F1212G1010R F66GDB F88GDB F1010GDB F1212GDB F1212GDB F66GSH F88GSH F1010GSH F1212GSH F1212GSH F66GUC F88GUC F1010GUC F1212GUC F1212GUC F66BK60 F88BK60 — — — Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 5 51 Bulletin f30G Lay-In Wireway, NEMA Type 3R Industry Standards UL 870 Listed; File No. E27524; Raintight NEMA/EEMAC Type 3R CSA File No. 42184, Type 3R IEC 60529, IP32 Description 12.00-in. (305-mm) Male Straight Section 60.00-in. (1524-mm) Male Straight Section 120.00-in. (3048-mm) Male Straight Section 52 4.00 x 4.00 in. 102 x 102 mm 6.00 x 6.00 in. 152 x 152 mm 8.00 x 8.00 in. 203 x 203 mm F44T3R12 F44T3R60 F44T3R120 F66T3R12 F66T3R60 F66T3R120 F88T3R12 F88T3R60 F88T3R120 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin f30G Lay-In Wireway, NEMA Type 3R Description 90° Flush Tee 30° Sweep Elbow 90° Elbow-Tee-Cross 90° Elbow Panel Adapter Closure Plate Reducer Drop and Bracket Hanger Wall Hanger Universal U-Connector 4.00 x 4.00 in. 102 x 102 mm 6.00 x 6.00 in. 152 x 152 mm 8.00 x 8.00 in. 203 x 203 mm F44T3RT F44T3R30SE F44T3RTX F44T3R90E F44T3RPA F44T3RCP — F44T3RDH F44T3RWH F44T3RUC F66T3RT F66T3R30SE F66T3RTX F66T3R90E F66T3RPA F66T3RCP F66T3R44R F66T3RDH F66T3RWH F66T3RUC F88T3RT F88T3R30SE F88T3RTX F88T3R90E F88T3RPA F88T3RCP F88T3R66R F88T3RDH F88T3RWH F88T3RUC 5 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 53 Bulletin f40t1 Wiring Trough, NEMA Type 1 Industry Standards UL 870 Listed; File No. E27524 cUL CSA C22.2 No. 26 Listed; File No. E27524 NEMA/EEMAC: Type 1 Reading Catalog Numbers A 4 H 4 12 W L IEC 60529, IP30 T1T Catalog Number Catalog Number A4412T1T A4424T1T A4436T1T A4448T1T A4460T1T A4472T1T A4496T1T A6612T1T A6624T1T A6636T1T A6648T1T A6660T1T A6672T1T A6696T1T A8824T1T A8836T1T A8848T1T A8860T1T A8872T1T A8896T1T A101048T1T A121224T1T A121236T1T A121248T1T A121260T1T A121272T1T A121296T1T A1212120T1T 54 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin f40pt Wiring Trough, NEMA Type 3R Industry Standards UL 870 Listed; File No. E27524; Raintight cUL CSA C22.2 No. 26 Listed; File No. E27524; Raintight Reading Catalog Numbers A 4 H 4 12 W L RT NEMA/EEMAC Type 3R IEC 60529, IP32 Catalog Number Catalog Number A4412RT A4418RT A4424RT A4436RT A4448RT A4460RT A4472RT A6612RT A6618RT A6624RT A6636RT A6648RT A6660RT A6672RT A8812RT A8824RT A8836RT A8848RT A8860RT A88116RT A101024RT A101036RT A101048RT A101060RT A101096RT A101072RT A1010116RT A121224RT A121236RT A121248RT A121260RT A121272RT A121284RT A121296RT A1212116RT A141448RT A141472RT A141484RT A141496RT A1414116RT A8872RT A8896RT Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 5 55 Bulletin f23 CLEAN TRAY® Stainless Steel Cable Tray, Type 1 Industry Standards UL Classified; File No. E263414 This product is classified as to its suitability as an equipment grounding conductor only. NEMA/EEMAC Type 1 Description 10-ft. Straight Section, Standard Cover 10-ft. Straight Section, Perforated 10-ft. Straight Section, 20° Sloped Cover 10-ft. Straight Section, Perforated 20° Sloped Cover Divider Straight Section Telescopic Straight Section (18.74 in. to 30.61 in.) Divider, Telescopic Straight Section 90-Degree Elbows, Front Cover 90-Degree Elbows, Front Cover without Tabs 90-Degree Elbows, Inside Cover 90-Degree Elbows, Outside Cover 90-Degree Elbows, Front Cover Perforated 90-Degree Elbows, Front Cover Sloped Inward 90-Degree Elbows, Front Cover Sloped Inward Perforated 90-Degree Elbows, Perforated without Tabs 90-Degree Elbows, Front Cover Sloped Inward without Tabs 90-Degree Elbows, Front Cover Sloped Outward with Tabs 90-Degree Elbows, Front Cover Sloped Outward without Tabs 90-Degree Elbows, Inside Cover Sloped 90-Degree Elbows, Outside Cover Sloped 45-Degree Elbows, Front Cover 45-Degree Elbows, Inside Cover 56 2.00 x 2.00 in. 51 x 51 mm 4.00 x 4.00 in. 102 x 102 mm CT22120SS CT22P120SS — — — CT22TSS — CT22EFC90SS CT22EFCNT90SS CT22EIC90SS CT22EOC90SS CT22PEFC90SS — — CT22PEFCNT90SS — — — — — CT22EFC45SS CT22EIC45SS CT33120SS CT33P120SS CTS33120SS CTS33P120SS CT33DSS CT33TSS CT33TDSPSS CT33EFC90SS CT33EFCNT90SS CT33EIC90SS CT33EOC90SS CT33PEFC90SS CTS33EFC90SS CTS33PEFC90SS CT33PEFCNT90SS — — — — — CT33EFC45SS CT33EIC45SS Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin f23 CLEAN TRAY® Stainless Steel Cable Tray, Type 1 4.00 x 4.00 in. 102 x 102 mm 4.00 x 6.00 in. 102 x 152 mm 6.00 x 6.00 in. 152 x 152 mm CT44120SS CT44P120SS CTS44120SS CTS44P120SS CT44DSS CT44TSS CT44TDSPSS CT44EFC90SS CT44EFCNT90SS CT44EIC90SS CT44EOC90SS CT44PEFC90SS CTS44EFC90SS CTS44PEFC90SS CT44PEFCNT90SS CTS44EFCNT90SS CTS44EFCO90SS CTS44EFCONT90SS CTS44EIC90SS CTS44EOC90SS CT44EFC45SS CT44EIC45SS CT46120SS CT46P120SS CTS46120SS CTS46P120SS — CT46TSS — CT46EFC90SS CT46EFCNT90SS CT46EIC90SS CT46EOC90SS CT46PEFC90SS CTS46EFC90SS CTS46PEFC90SS CT46PEFCNT90SS CTS46EFCNT90SS CTS46EFCO90SS CTS46EFCONT90SS CTS46EIC90SS CTS46EOC90SS CT46EFC45SS CT46EIC45SS CT66120SS CT66P120SS CTS66120SS CTS66P120SS CT66DSS CT66TSS CT66TDSPSS CT66EFC90SS CT66EFCNT90SS CT66EIC90SS CT66EOC90SS CT66PEFC90SS CTS66EFC90SS CTS66PEFC90SS CT66PEFCNT90SS CTS66EFCNT90SS CTS66EFCO90SS CTS66EFCONT90SS CTS66EIC90SS CTS66EOC90SS CT66EFC45SS CT66EIC45SS Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 5 57 Bulletin f23 CLEAN TRAY® Stainless Steel Cable Tray, Type 1 Description 45-Degree Elbows, Outside Cover 45-Degree Elbows, Front Cover Perforated 45-Degree Elbows, Front Cover Sloped 45-Degree Elbows, Front Cover Sloped Perforated 45-Degree Elbows, Front Cover Sloped Outward 45-Degree Elbows, Inside Cover Sloped 45-Degree Elbows, Outside Cover Sloped Variable-Angle Elbow Fitting 90-Degree Tee, Front Cover 90-Degree Tee, Inside Cover 90-Degree Tee, Outside Cover 90-Degree Tee, Front Cover Perforated 90-Degree Tee, Front Cover Sloped 90-Degree Tee, Front Cover Sloped Perforated 90-Degree Tee, Front Cover Sloped Outward 90-Degree Tee, Inside Cover Sloped 90-Degree Tee, Outside Cover Sloped Divider 90-Degree Tee, Front Cover Divider 90-Degree Tee, Inside Cover Divider 90-Degree Tee, Outside Cover Divider 90-Degree Elbow, Front Cover Divider 90-Degree Elbow, Inside Cover Divider 90-Degree Elbow, Outside Cover Divider 45-Degree Elbow, Front Cover Divider 45-Degree Elbow, Inside Cover Divider 45-Degree Elbow, Outside Cover 58 2.00 x 2.00 in. 51 x 51 mm 4.00 x 4.00 in. 102 x 102 mm CT22EOC45SS CT22PEFC45SS — — — — — CT22VSS CT22TFCSS — CT22TOCSS CT22PTFCSS — — — — — — — — — — — — — — CT33EOC45SS CT33PEFC45SS CTS33EFC45SS CTS33PEFC45SS — — — CT33VSS CT33TFCSS CT33TICSS CT33TOCSS CT33PTFCSS CTS33TFCSS CTS33PTFCSS — — — CT33DTFCSS CT33DTICSS CT33DTOCSS CT33DEFC90SS CT33DEIC90SS CT33DEOC90SS CT33DEFC45SS CT33DEIC45SS CT33DEOC45SS Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Bulletin f23 CLEAN TRAY® Stainless Steel Cable Tray, Type 1 4.00 x 4.00 in. 102 x 102 mm 4.00 x 6.00 in. 102 x 152 mm 6.00 x 6.00 in. 152 x 152 mm CT44EOC45SS CT44PEFC45SS CTS44EFC45SS CTS44PEFC45SS CTS44EFCO45SS CTS44EIC45SS CTS44EOC45SS CT44VSS CT44TFCSS CT44TICSS CT44TOCSS CT44PTFCSS CTS44TFCSS CTS44PTFCSS CTS44TFCOSS CTS44TICSS CTS44TOCSS CT44DTFCSS CT44DTICSS CT44DTOCSS CT44DEFC90SS CT44DEIC90SS CT44DEOC90SS CT44DEFC45SS CT44DEIC45SS CT44DEOC45SS CT46EOC45SS CT46PEFC45SS CTS46EFC45SS CTS46PEFC45SS CTS46EFCO45SS CTS46EIC45SS CTS46EOC45SS CT46VSS CT46TFCSS CT46TICSS CT46TOCSS CT46PTFCSS CTS46TFCSS CTS46PTFCSS CTS46TFCOSS CTS46TICSS CTS46TOCSS CT46DTFCSS — CT46TOCSS CT46DEFC90SS — — CT46DEFC45SS — — CT66EOC45SS CT66PEFC45SS CTS66EFC45SS CTS66PEFC45SS CTS66EFCO45SS CTS66EIC45SS CTS66EOC45SS CT66VSS CT66TFCSS CT66TICSS CT66TOCSS CT66PTFCSS CTS66TFCSS CTS66PTFCSS CTS66TFCOSS CTS66TICSS CTS66TOCSS CT66DTFCSS CT66DTICSS CT66DTOCSS CT66DEFC90SS CT66DEIC90SS CT66DEOC90SS CT66DEFC45SS CT66DEIC45SS CT66DEOC45SS Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 5 59 Bulletin f40gt EconoTrough, NEMA Type 3R Industry Standards UL 870 Listed; File No. E27524; Raintight cUL CSA C22.2 No. 26 Listed; File No. E27524; Raintight Reading Catalog Numbers F 4 H 4 12 W L NEMA/EEMAC Type 3R IEC 60529, IP 32 RTGV Catalog Number Catalog Number F4412RTGV F4424RTGV F4436RTGV F4448RTGV F4460RTGV F4472RTGV F6612RTGV F6618RTGV F6624RTGV F6636RTGV F6648RTGV F6660RTGV F6672RTGV F8812RTGV F8824RTGV F8836RTGV F8848RTGV F8860RTGV F8872RTGV F8896RTGV F88116RTGV F101024RTGV F101036RTGV F101048RTGV F101060RTGV F101072RTGV F101096RTGV F1010116RTGV F121224RTGV F121236RTGV F121248RTGV F121260RTGV F121272RTGV F121284RTGV F121296RTGV F1212116RTGV F141448RTGV F141472RTGV F141496RTGV F1414116RTGV 60 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Technical Information Table of Contents Comparison of Specific Non-Hazardous Applications - Outdoors.........................62 Comparison of Specific Non-Hazardous Applications - Indoors.............................62 Cross-Reference NEMA, UL, CSA vs. IEC Enclosure Type.............................................63 NEMA, UL and CSA Ratings - Non-Hazardous Locations............................................64 Enclosure Type Rating vs. IP Rating.....................................................................................66 Specifying Enclosure Materials............................................................................................. 67 Glossary - Non-Hazardous Environmental Conditions................................................68 Thermal Management Critical Parameters (upper temperature limits).............................................................. 70 Electrical Reference Ohm’s Law.....................................................................................................................................72 Series and Parallel Circuits......................................................................................................73 Common Electrical Distribution...........................................................................................73 Electrical Formulas..................................................................................................................... 74 Capacitance.................................................................................................................................. 75 Impedance / Reactance........................................................................................................... 76 Resistor Color Code....................................................................................................................77 Full-Load Current (Amps) for DC Motors...........................................................................78 Full-Load Current (Amps) for Single-Phase AC Motors................................................79 Glossary of Electrical Terms....................................................................................................79 Measurement Gauge Equivalents.....................................................................................................................80 English-to-Metric Conversions..............................................................................................80 Celcius-to-Fahrenheit Conversions..................................................................................... 81 Decimal / Fraction / mm Equivalents..................................................................................82 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 61 Technical Information Industry Standards Industry Standards (Cont.) Comparison of Specific Non-Hazardous Applications in Outdoor Locations Type of Enclosure Provides a Degree of Protection Against the Following Environmental Conditions Incidental contact with the enclosed equipment Rain, snow and sleetb Sleetc Windblown dust Hose-down Corrosive agents Occasional temporary submersion 3 3Ra 3RXa 4 4X 6 • • • • • • • • • • • • • • • • • • • • • • a These enclosures may be ventilated. b External operating mechanisms are not required to be operable when enclosure is ice covered. c External operating mechanisms are operable when enclosure is ice covered. in Indoor Locations Provides a Degree of Protection Against the Following Environmental Conditions Incidental contact with the enclosed equipment Falling dirt Falling liquids and light splashing Dust, lint, fibers and flyingsb Hose-down and splashing water Oil and coolant seepage Oil or coolant spraying and splashing Corrosive agents Occasional temporary submersion Type of Enclosure 1a 4 4X 6 12 12K 13 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • a These enclosures may be ventilated. However, Type 1 may not provide protection against small particles of falling dirt when ventilation is provided in the enclosure top. Consult Hoffman for more information. b These fibers and flyings are non-hazardous materials and are not considered Class II type ignitable fibers or combustible flyings. For Class III type ignitable fibers or combustible flyings see the National Electrical Code Section 505. The preceding tables are reproduced by permission of the National Electrical Manufacturers Association from NEMA Standards Publication 250 “Enclosures for Electrical Equipment (1000 Volts Maximum)”. 62 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Industry Standards (Cont.) Enclosure Rating Type 1 IP20 IP22 IP55 IP65 IP67 • • • • Type 4 Type 4X • Type 6 Type 12, 12K IP66 • Type 3 Type 3R, 3RX IP64 Technical Information Cross-Reference (Approximate) NEMA, UL, CSA vs. IEC Enclosure Type • Type 13 • IEC 60529 has no equivalents to NEMA enclosure Types 7, 8, 9, 10 or 11. • Indicates compliance. NEMA, UL and CSA are standard-writing organizations commonly recognized in North America. Their ratings are based on similar application descriptions and expected performance. UL and CSA both require enclosure testing by qualified evaluators in their certified labs. They also send site inspectors to make sure a manufacturer adheres to prescribed manufacturing methods and material specifications. NEMA, on the other hand, does not require independent testing and leaves compliance completely up to the manufacturer. Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 63 64 Type 12K Type 13 Indoor Indoor Outdoor Type 3 Type 12 Type 1 Indoor Indoor Enclosure Type UL CSA Indoor use to provide a degree of protection against dust, dirt, fiber flyings, dripping water and external condensation of noncorrosive liquids. Indoor use primarily to provide protection General purpose enclosure. Protects against contact with the enclosed against accidental contact with live parts. equipment and against a limited amount of falling dirt. Indoor use; provides a degree of protection against circulating dust, lint, fibers and flyings; dripping and light splashing of non-corrosive liquids; not provided with knockouts. Enclosures with knockouts are intended Indoor use to provide a degree of Indoor use: provides a degree of protection for indoor use primarily to provide a protection against dust, dirt, fiber flyings, against circulating dust, lint, fibers and degree of protection against dust, falling dripping water and external condensation flyings; dripping and light splashing of dirt and dripping noncorrosive liquids. of noncorrosive liquids. noncorrosive liquids; not provided with knockouts. Enclosures are intended for indoor use Indoor use to provide a degree of Indoor use; provides a degree of primarily to provide a degree of protection protection against lint, dust seepage, protection against circulating dust, lint, against dust, spraying of water, oil and external condensation and spraying of fibers and flyings; seepage and spraying noncorrosive coolant. water, oil and noncorrosive liquids. of non-corrosive liquids, including oils and coolants. Enclosures are intended for outdoor use Outdoor use to provide a degree of Indoor or outdoor use; provides a degree primarily to provide a degree of protection protection against windblown dust and of protection against rain, snow and against windblown dust, rain and sleet; windblown rain; undamaged by the windblown dust; undamaged by the undamaged by the formation of ice on formation of ice on the enclosure. external formation of ice on the enclosure. the enclosure. Enclosures are intended for indoor use primarily to provide a degree of protection against contact with the enclosed equipment or locations where unusual service conditions do not exist. Enclosures are intended for indoor use primarily to provide a degree of protection against dust, falling dirt and dripping noncorrosive liquids. NEMA NEMA, UL and CSA Ratings Non-Hazardous Locations Industry Standards (Cont.) Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products NEMA Enclosures are intended for use indoors or outdoors where occasional submersion is encountered; limited depth; undamaged by the formation of ice on the enclosure. Enclosures are intended for outdoor use primarily to provide a degree of protection against falling rain and sleet; undamaged by the formation of ice on the enclosure. Enclosures are intended for outdoor use primarily to provide a degree of protection against corrosion, falling rain and sleet; undamaged by the formation of ice on the enclosure. Enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water and hose directed water; undamaged by the formation of ice on the enclosure. Enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water and hose-directed water; undamaged by the formation of ice on the enclosure. See footnotes on page 66 Outdoor Type 6 Outdoor Type 4X Outdoor Type 4 Outdoor Type 3RX Outdoor Type 3R Enclosure Type UL Indoor or outdoor use to provide a degree of protection against entry of water during temporary submersion at a limited depth; undamaged by the external formation of ice on the enclosure. Either indoor or outdoor use to provide a degree of protection against falling rain, splashing water and hose-directed water; undamaged by the formation of ice on the enclosure; resists corrosion. Either indoor or outdoor use to provide a degree of protection against falling rain, splashing water and hose-directed water; undamaged by the formation of ice on the enclosure. Outdoor use to provide a degree of protection against falling rain; undamaged by the formation of ice on the enclosure. Not specifically defined. CSA Technical Information Indoor or outdoor use; provides a degree of protection against the entry of water during temporary submersion at a limited depth. Undamaged by the external formation of ice on the enclosure; resists corrosion. Indoor or outdoor use; provides a degree of protection against rain, snow, windblown dust, splashing and hose-directed water; undamaged by the external formation of ice on the enclosure; resists corrosion. Indoor or outdoor use; provides a degree of protection against rain, snow, windblown dust, splashing and hose-directed water; undamaged by the external formation of ice on the enclosure. Indoor or outdoor use; provides a degree of protection against rain and snow; undamaged by the external formation of ice on the enclosure. Not specifically defined. Industry Standards (Cont.) 65 Industry Standards (Cont.) a This material is reproduced with permission from NEMA. The preceding descriptions, however, are not intended to be complete representations of National Electrical Manufacturers Association standards for enclosures nor those of the Electrical and Electronic Manufacturers Association of Canada. b This material is reproduced with permission from Underwriters Laboratories Inc. Enclosures for Electrical Equipment, UL 50, and Industrial Control Panels, UL 508A. Underwriters Laboratories (UL) shall not be responsible for the use of or reliance upon a UL Standard by anyone. UL shall not incur any obligation or liability for damages, including consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon a UL Standard. c This material is reproduced with permission from the Canadian Standards Association. Enclosure Type Rating vs. IP Rating Electrical enclosures are rated by Type (NEMA 250 / UL 50, 50E), and/or IP rating (IEC 60529) based upon the degree of protection provided. Type ratings and IP ratings have only the following in common: 1. A degree of protection for persons from hazardous components inside the enclosure 2. A degree of protection for equipment inside the enclosure from ingress of solid foreign objects, including dust 3. A degree of protection for equipment inside the enclosure from ingress of water NEMA 250 and UL 50 and 50E Type rating documentation defines additional requirements that a Type-rated enclosure must meet. These include: •• Mechanical impact on enclosure walls •• Gasket aging and oil resistance •• Corrosion resistance •• Door and cover latching requirements •• Sheet metal gauge construction requirements (UL 50 only) Electrical enclosures that carry only an IP rating have not been designed or tested to the additional Type-rating requirements. For this reason, and because the tests and evaluations for other characteristics are not identical, the IP ratings cannot be exactly equated with NEMA enclosure Types. Electrical enclosures manufactured by Hoffman are tested for and carry both Type and IP ratings. 66 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Industry Standards (Cont.) While some enclosure materials offer exceptional corrosion resistance, they may not provide the physical strength required to support internal components. This graph plots primary enclosure materials on a grid of physical strength and corrosion resistance. Strength/Corrosion Resistance of Enclosure Materials Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 67 Technical Information Specifying Enclosure Materials Industry Standards (Cont.) Glossary Terms Specifying Non-Hazardous Environmental Conditions Corrosion-Resistant— Constructed to provide a degree of protection against exposure to corrosive agents such as salt spray. Type 3RX and 4X enclosures meet this requirement. Damp Locations—Locations protected from weather and not subject to saturation with water or other liquids but subject to moderate degrees of moisture. Examples of damp locations include partially protected areas under canopies, marquees, roofed open porches and like locations, and interior locations subject to moderate degrees of moisture, such as some basements, some barns and some cold-storage warehouses. See the indoor enclosure types and select a type rating that fits the specific application. Dust-tight— Constructed so that circulating or airborne dust will not enter the enclosure under specified test conditions. Type 3, 4, 4X, 12, 12K and 13 enclosures meet this requirement. Drip-tight— Constructed so that falling moisture or dirt does not enter the enclosure under specified test conditions. Type 3, 4, 4X, 12, 12K and 13 enclosures meet this requirement. Indoor—Not to be exposed to weather. Type 1, 12, 12K and 13 enclosures meet this requirement. Oil-Resistant— Constructed so that oil will not interfere with successful operation of equipment. Type 12 and 13 enclosures meet this requirement. Oil-tight— Constructed so that oil will not enter the enclosure under specified test conditions. Type 13 enclosures meet this requirement. Outdoor— Constructed or protected so that exposure to the weather will not interfere with successful operation of equipment. Type 3, 3R, 4, 4X and 6 enclosures meet this requirement. These ratings can also be used indoors. 68 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Industry Standards (Cont.) interfering with the successful operation of the apparatus or result in wetting of live parts and wiring within the enclosure under specified test conditions. Type 3R and 3RX enclosures meet this requirement. Rain-tight— Constructed or protected so that exposure to beating rain will not result in water entering the enclosure under specified test conditions. Type 3, 4, 4X and 6 enclosures meet this requirement. Water-tight— Constructed so that moisture will not enter the enclosure when it is subjected to a stream of water under specified test conditions. Type 4, 4X and 6 enclosures meet this requirement. Weatherproof— Constructed or protected so that exposure to the weather will not interfere with successful operation of the equipment. Rainproof, raintight or watertight equipment can fulfill the requirements for weatherproof where varying weather conditions other than wetness, such as snow, ice, dust or temperature extremes, are not a factor. Wet Locations—Installations underground or in concrete slabs or masonry in direct contact with the earth; in locations subject to saturation with water or other liquids, such as vehicle washing areas; and in unprotected locations exposed to weather. Use weatherproof enclosures with a type rating that fits the specific application. Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 69 Technical Information Rainproof— Constructed, protected or treated to prevent beating rain from Thermal Management Critical Parameters (upper temperature limits) Enclosure Heat Load Calculations Drive heat: WD = ([HP x 745.7 Watts/HP] / EM) x (I-ED) Watts Total heat: Estimate an additional 25%a for wire connections and other components. W T = WD x 1.25a Watts Required airflow: CFM = (W T x 3.16) / (Tint - Tamb) Ft3 / Min. This is an estimated factor. Further investigation is necessary to obtain actual total heat dissipated in enclosure. a 70 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Thermal Management (Cont.) Technical Information Variable Descriptions Typical Values Variables Maximum ambient temperature Tamb 104 F Maximum internal temperature Tint 122 F Typical temperature rise (Tint - Tamb) 15 F Full-load drive power hp Motor efficiencyb EM .80-.96 b Drive efficiency ED .96-.98 Drive heat loss WD Total heat loss WT Required airflow CFM b Use full-load efficiency. Motor and drive efficiency will vary based on HP and voltage. Sample Values Airflow when Additional Total Typical Full Typical Full Drive Tint - Tamb Drive Heat Heat Load Load Heat Horsepower Rating - Motor Rating - Drive Loss WD Lossa Loss WT = 15 F (Watts) (Watts) (Watts) (CFM) (hp) Efficiency Efficiency 3 .86 .97 78 20 98 21 10 .90 .97 249 62 311 65 25 .91 .97 615 154 768 162 40 .92 .98 648 162 811 171 75 .93 .98 1203 301 1503 317 100 .94 .98 1587 397 1983 418 a Additional Heat Loss - This is an estimated factor. Further investigation is necessary to obtain actual total heat dissipated in enclosure. Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 71 Electrical Reference Ohm’s Law The relationship between voltage, current and resistance in an electrical circuit where: V + _ I = current (amps) V = E = volts (electromotive force or potential difference) R = resistance (ohms) P = power (Watts) In mathematical terms: I R I=E÷R E=I x R R=E÷I √ =√ Amps = I Watts = P = 72 Volts Watts = Ohms Volts P E = E = R = Volts2 = Volts x Amps = Amps2 x Ohms Ohms 2 E = E x I = I2 x R R √ Watts x Ohms = Amps x Ohms = P =√PxR = IxR = I Volts = E Watts Ohms P R Watts Amps Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Electrical Reference (Cont.) Technical Information 2 Ohms = Volts = Watts2 = Volts Watts Amps Amps 2 R = E = P2 = E P I I Series Circuits Total Volts = ET = E1 + E2 + E3 Total Amps = IT = I1 = I2 = I3 Total Ohms = RT = R1 + R2 + R3 Parallel Circuits If total current and total voltage are unknown, use this formula: 1 1 1 1 = + + RT R1 R2 R3 The total resistance of several matching resistors (same resistance in each one) connected in parallel equals the resistance of one resister divided by the number of resistors: RT = R where RT is total resistance, R is the resistance N of one resistor and N is the number of resistors Common Electrical Distribution 120/240 Volt Single-Phase Three-Wire System 120/240 Volt Three-Phase Four-Wire System (Delta High Leg) 120/208 Volt Three-Phase Four-Wire System (WYE Connected) 277/480 Volt Three-Phase Four-Wire System (WYE Connected) Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 73 Electrical Reference (Cont.) Electrical Formulas Amps when HP is known Horsepower (HP) DC Single Phase AC 2 Phase-4 Wire AC 3 Phase AC E x I x % Efficiency 746 E x I x % Efficiency x PF 746 E x I x % Efficiency x PF x 2 746 E x I x % Efficiency x PF x 1.73 746 DC Single Phase AC 2 Phase-4 Wire AC 3 Phase AC Amps when KW is known Kilowatts (KW) DC Single Phase AC 2 Phase-4 Wire AC 3 Phase AC ExI 1000 E x I x PF 1000 E x I x PF x 2 1000 E x I x PF x 1.73 1000 DC Single Phase AC 2 Phase-4 Wire AC 3 Phase AC Single Phase AC 2 Phase-4 Wire AC 3 Phase AC Where 74 — ExI 1000 ExIx2 1000 E x I x 1.73 1000 E = Volts I = Amps W = Watts KW x 1000 E KW x 1000 E x PF KW x 1000 E x PF x 2 KW x 1000 E x PF x 1.73 Amps when KVA is known Kilovolt Amps (KVA) DC HP x 746 E x % Efficiency HP x 746 E x % Efficiency x PF HP x 746 E x % Efficiency x PF x 2 HP x 746 E x % Efficiency x PF x 1.73 DC Single Phase AC 2 Phase-4 Wire AC 3 Phase AC — KVA x 1000 E KVA x 1000 Ex2 KVA x 1000 E x 1.73 % Efficiency = Output (Watts) Input (Watts) PF = Power Factor Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Electrical Reference (Cont.) C= Q = E Technical Information Capacitance (C) Coulombs Volts Where C is capacitance in farads, Q is the quantity of stored electrical charge in coulombs and E is the difference in potential in volts. Therefore, stored electric charge can be calculated using the formula: Q = CV The difference in potential or voltage of the capacitor can be calculated using the formula: E = Q/C The total capacitance in a circuit containing capacitors in parallel: C T = C1 + C2 + C3 . . . The total capacitance in a circuit containing capacitors in series: 1 = 1 + 1 + 1 +... CT C1 C2 C3 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 75 Electrical Reference (Cont.) Impedance The impedance (Z) is the combination of resistance and reactance in an alternating current circuit. E Z= I Z= √R +X Z= √ R + (X - X ) 2 2 2 L C 2 Where: Z = impedance (in ohms) R = resistance (in ohms) E = volts I = amps X = reactance (in ohms) XL = inductive reactance (in ohms) XC = capacitive reactance (in ohms) Reactance Reactance (X) is a component of impedance caused by inductance and capacitance to an alternating current in a given circuit. Inductive reactance: XL = 2 x 3.1416 x F x L Where: F = frequency (in Hertz) L = inductance (in Henry) Capacitive reactance: 1 XC = where C = conductance (in Farads) 2 x 3.1416 x F x C 76 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Electrical Reference (Cont.) Band Color Black Brown Red Orange Yellow Green Blue Violet Gray White Gold Silver No Band 1st Band 0 1 2 3 4 5 6 7 8 9 1st band 2nd Band 0 1 2 3 4 5 6 7 8 9 2nd band Multiplier 1 10 100 1,000 10,000 100,000 1,000,000 10,000,000 100,000,000 1,000,000,000 0.1 0.01 Technical Information Resistor Color Code % Tolerance ± 5% ± 10% ± 20% % Tolerance Multiplier Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 77 Electrical Reference (Cont.) Full–Load Current (Amps) for DC Motors Motors running at base speed. HP 90 V 120 V 180 V 240 V 500 V 550 V 1/4 1/3 1/2 3/4 1 1 1/2 2 3 5 7 1/2 10 15 20 25 30 40 50 60 75 100 125 150 200 4 5.2 6.8 9.6 12.2 – – – – – – – – – – – – – – – – – – 3.1 4.1 5.4 7.6 9.5 13.2 17 25 40 58 76 – – – – – – – – – – – – 2 2.6 3.4 4.8 6.1 8.3 10.8 16 27 – – – – – – – – – – – – – – 1.6 2 2.7 3.8 4.7 6.6 8.5 12.2 20 29 38 55 72 89 106 140 173 206 255 341 425 506 675 – – – – – – – – – 13.6 18 27 34 43 51 67 83 99 123 164 205 246 330 – – – – – – – – – 12.2 16 24 31 38 46 61 75 90 111 148 185 222 294 Table based on 2008 National Electrical Code. 78 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Electrical Reference (Cont.) HP 115 V 200 V 208 V 230 V 1/6 1/4 1/3 1/2 3/4 1 1 1/2 2 3 5 7 1/2 10 4.4 5.8 7.2 9.8 13.8 16 20 24 34 56 80 100 2.5 3.3 4.1 5.6 7.9 9.2 11.5 13.8 19.6 32.2 46 57.5 2.4 3.2 4 5.4 7.6 8.8 11 13.2 18.7 30.8 44 55 2.2 2.9 3.6 4.9 6.9 8 10 12 17 28 40 50 Technical Information Full-Load Current (Amps) for Single-Phase AC Motors Amps listed are for voltage ranges of 110-120 and 220-240. Glossary of Electrical Terms Capacitance—a measure of the amount of electric charge stored (or separated) for a given electric potential. Impedance—the generalization of the concept of resistance from DC to AC. It is a way to represent how much current will flow with a specified (AC) voltage across the impedance. If there is one volt AC across an impedance that lets one ampere of AC current flow, the impedance is defined by the AC version of Ohm’s law and is one ohm. Potential— the potential energy per unit of charge associated with a static (time-invariant) electric field, also called the electrostatic potential, typically measured in volts. Power Factor— the power factor of an AC electric power system is defined as the ratio of the real power to the apparent power, and is a number between 0 and 1. Reactance— the imaginary part of impedance caused by the presence of inductors or capacitors in the circuit. Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 79 Measurement Gauge Equivalents Gauge Number Nominal Thickness in inches Nominal Thickness in millimeters 7 Gauge 8 Gauge 9 Gauge 10 Gauge 11 Gauge 12 Gauge 13 Gauge 14 Gauge 15 Gauge 16 Gauge 17 Gauge 18 Gauge 19 Gauge 20 Gauge 21 Gauge 22 Gauge 0.179 0.164 0.150 0.134 0.120 0.105 0.090 0.075 0.067 0.060 0.054 0.048 0.042 0.036 0.033 0.030 4.547 4.166 3.810 3.404 3.048 2.667 2.286 1.905 1.702 1.524 1.372 1.219 1.067 0.914 0.838 0.762 English-to-Metric Conversions English 1 inch 12 inches = 1 foot 3 feet = 1 yard 1 inch2 1 foot2 = 144 inches2 9 feet2 = 1 yard2 = 1296 inches2 640 acres = 1 mile2 1 ft.3 = 1,728 inches2 1 yard2 = 27 ft.2 2 pints = 1 quart = .5 gallon 16 oz. = 1 lb. 2,000 lb. = 1 ton 80 Metric 2.54 centimeters = 25.4 millimeters 30.48 centimeters = 304.8 millimeters .914 meters = 91.44 centimeters 6.45 centimeters2 929.03 centimeters2 8361.3 centimeters2 = 0.83613 meters2 2.59 kilometers2 33.98 meters2 .76 meters2 .94 liter 453.59 grams = .454 kg 1016 kg Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Measurement (Cont.) °C °F °C °F °C °F °C °F 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 32 33.8 35.6 37.4 39.2 41 42.8 44.6 46.4 48.2 50 51.8 53.6 55.4 57.2 59 60.8 62.6 64.4 66.2 68 69.8 71.6 73.4 75.2 77 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 78.8 80.6 82.4 84.2 86 87.8 89.6 91.4 93.2 95 96.8 98.6 100.4 102.2 104 105.8 107.6 109.4 111.2 113 114.8 116.6 118.4 120.2 122 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 123.8 125.6 127.4 129.2 131 132.8 134.6 136.4 138.2 140 141.8 143.6 145.4 147.2 149 150.8 152.6 154.4 156.2 158 159.8 161.6 163.4 165.2 167 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 168.8 170.6 172.4 174.2 176 177.8 179.6 181.4 183.2 185 186.8 188.6 190.4 192.2 194 195.8 197.6 199.4 201.2 203 204.8 206.6 208.4 210.2 212 °C = 5/9 x (°F - 32) °F = (9/5 x °C) + 32 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 81 Technical Information Celcius-to-Fahrenheit Conversions Measurement Decimal / Fraction / mm Equivalents Decimal .0156 .0313 .0469 .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2656 .2812 .2969 .3125 .3281 .3438 .3594 .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 82 Fraction mm 1/32 1/16 2/32 3/32 1/8 2/16 4/32 5/32 3/16 6/32 7/32 1/4 2/8 4/16 8/32 9/32 5/16 10/32 11/32 3/8 6/16 12/32 13/32 7/16 14/32 15/32 1/2 2/4 4/8 8/16 16/32 1/64 2/64 3/64 4/64 5/64 6/64 7/64 8/64 9/64 10/64 11/64 12/64 13/64 14/64 15/64 16/64 17/64 18/64 19/64 20/64 21/64 22/64 23/64 24/64 25/64 26/64 27/64 28/64 29/64 30/64 31/64 32/64 .396 .795 1.191 1.588 1.984 2.383 2.779 3.175 3.571 3.768 4.366 4.763 5.159 5.558 5.954 6.350 6.746 7.143 7.541 7.938 8.334 8.733 9.129 9.525 9.921 10.317 10.716 11.112 11.509 11.908 12.304 12.700 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products Measurement (Cont.) Decimal .5156 .5312 .5469 .5625 .5781 .5938 .6094 .6250 .6406 .6562 .6719 .6876 .7031 .7188 .7344 .7500 .7656 .7812 .7969 .8125 .8281 .8438 .8465 .8750 .8906 .9062 .9219 .9375 .9531 .9688 .9844 1.000 Fraction mm 17/32 9/16 18/32 19/32 5/8 10/16 20/32 21/32 11/16 22/32 23/32 3/4 6/8 12/16 24/32 25/32 13/16 26/32 27/32 7/8 14/16 28/32 29/32 15/16 30/32 31/32 1 4/4 8/8 16/16 32/32 Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products 33/64 34/64 35/64 36/64 37/64 38/64 39/64 40/64 41/64 42/64 43/64 44/64 45/64 46/64 47/64 48/64 49/64 50/64 51/64 52/64 53/64 54/64 55/64 56/64 57/64 58/64 59/64 60/64 61/64 62/64 63/64 64/64 13.096 13.492 13.891 14.288 14.684 15.083 15.479 15.875 16.271 16.667 17.066 17.465 17.859 18.258 18.654 19.050 19.446 19.842 20.241 20.637 21.034 21.433 21.501 22.225 22.621 23.017 23.416 23.813 24.209 24.608 25.004 25.400 83 Technical Information Decimal / Fraction / mm Equivalents (Cont.) Measurement 84 Notes Subject to change without notice PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products THREE EASY WAYS TO CONTACT US If you have questions, comments or need technical support for our products and services, choose from the contact information below. 1 CALL INDUSTRIAL/CONTRACTOR Customer Service and Orders Tel: 763.422.2211 Fax: 763.422.2600 Technical Applications Tel: 763.422.2175 Fax: 763.422.2600 2 GO ONLINE TO FIND A SALES OFFICE Go to hoffmanonline.com to locate your local Hoffman sales office and speak with a representative who can match you with a local distributor. 3 SUBMIT QUESTIONS VIA OUR ONLINE FORM Enter your questions or comments at hoffmanonline.com, and we will respond as quickly as possible. Hoffman Contractor Pocket Reference, Volume 4, is published by Pentair Technical Products, 2100 Hoffman Way, Anoka, MN 55303. Extracts from this literature may be copied or reproduced only with prior approval from Pentair Technical Products' Marketing Communications Department and if the originator is credited. Pentair Technical Products' policy is to continually develop and improve products. The company reserves the right to change product detail and technical specifications. We cannot accept any liability for publication errors and omissions. RETURNS & CLAIMS Tel: 763.422.2642 Fax: 763.422.2602 INTERNATIONAL Customer Service Tel: 763.422.2570 Fax: 763.422.2606 NORTH AMERICA EUROPE Pentair Technical Products 2100 Hoffman Way Anoka, MN 55303-1745 Tel: +1 (763) 421-2240 170 Commerce Drive Warwick, RI 02886 Tel. +1 (401) 732-3770 7328 Trade Street San Diego, CA 92121 Tel. +1 (858) 740-2400 1120 Rock Road Radford, VA 24141 Tel: +1 (540) 639-4440 Pentair Technical Products Hoffman Enclosures Inc. 111 Grangeway Ave., #504 Scarborough, ON M1H 3E9 Tel: +1 (416) 289-2770 Pentair Technical Products Hoffman Enclosures Mexico, S. de R.L. de C.V. Arquimedes 33 Piso 1 Colonia Palmas Polanco Mexico DF 11560 Tel: +52 55 5280 1449 Pentair Technical Products Schroff GmbH Langenalber Straße 96-100 75334 Straubenhardt, Germany Tel. +49 (0)7082 794-0 Pentair Technical Products Schroff UK Ltd. Maylands Avenue Hemel Hempstead Herts HP2 7DE Great Britain Tel. +44 (0)1442 240 471 Pentair Technical Products Schroff SAS Z.I. 4, rue du Marais Boîte Postale 16 67660 Betschdorf, France Tel. +33 (0)3 88 90 64 90 Pentair Technical Products Schroff Scandinavia AB Flygfältsgatan 11 P.O. Box 2003 12821 Skarpnäck, Sweden Tel. +46 (0) 8 683 61 00 Pentair Technical Products Schroff Scandinavia AB Peräsimentie 8 FIN-03100 Nummela Finland Tel. +358 9 222 68 00 Pentair Technical Products Schroff S.r.l. Via Brughiera 1 20010 Pregnana Milanese (MI) Italy Tel. +39 02 932 714-1 Pentair Technical Products Pentair Poland Sp.z.o.o. ul. Marynarska 21 PL-02-674 Warszawa Poland Tel. +48 (0) 22 607 06 16 SOUTH AMERICA Pentair Technical Products Pentair Taunus Eletrometalurgica Ltda Rua Joao Marcon, 165 18550.000 – Centro Boituva – SP Brazil Tel: +55 15 3363 9100 ASIA Pentair Technical Products 21st Floor of Cloud Nine Plaza No. 1118 West Yan'an Road Changning District, Shanghai P.R. China Tel: +86 400 820 1133 Pentair Technical Products India Pvt. Ltd. Unit 1, Factory 2 (Sai Lakshmi Industrial Campus) Kannamangala, Bidarahalli Hobli Whitefield – Hoskote Road Bangalore – 560 067 Tel: +91 80 2845 4640 Pentair Technical Products Hoffman Schroff Pte Ltd. 18 Boon Lay Way TradeHub 21, #04-110/111 Singapore 609966 Tel: +65 6795 2213 Pentair Technical Products Schroff K.K. Nisso No.13 Bldg. 4F 2-5-1 Shinyokohama Kohoku-ku yokohama-shi Kanagawa 222-0033 Japan Tel. +81 (0)45 476 02 81 For worldwide locations, see pentairtechnicalproducts.com ©2010 Pentair Technical Products Cat-00014 D