PROTOTYPING PROTOTYPING BOARDS MODEL NO. PB-1 (4 1/8" x 2 3/8") MODEL NO. PB-13, PB-21 Double sided pads with plated through holes. Silk-screened legend on component side indicates foil pattern on solder side. .042" diameter holes on 0.1" grid. Part No. 1-9 10+ 0302PB1 $4.50 $4.00 General purpose board. Single sided pads. Solder-ringed holes accepts DIPs, sockets, headers. MODEL NO. PB-2 (3 3/4" x 33/8") Single sided pads. Four separate busses. Silkscreened legend on component side indicates foil pattern on solder side. I/O connector area. .042" diameter holes on 0.1" grid. Part No. 0302PB2 1-9 $3.75 Part No. 0302PB13 0302PB21 10+ $3.25 Same as PB-1 except this model also has 4 separate busses and is approximately 4 times larger. 1-9 $19.95 PB-3 10+ $2.20 0.85 Experiment board 0.1" hole spacing. Etched copper stripes. All holes in a row along “L” are interconnected. 10+ $18.95 General purpose miniboard. Single sided pads. Size: 3.6" x 1.8" Part No. 0302PB16 0302PB17 1-9 10+ $1.20 $0.95 Size 6.3" x 3.9" 9.9" x 3.9" 1-9 $1.65 2.65 10+ $1.45 2.40 MODEL NO. PB-18 MODEL NO. PB-12 (3.6" x 1.7") (2.8" X 1.8") General purpose IC board. Single sided pads. Size: 3.6" x 1.7" Part No. 0302PB12 1-9 $2.50 0.95 (PB-16: 6.3" x 3.9") (PB-17: 9.9" x 3.9") MODEL NO. PB-11 (3.6" x 1.8") Part No. 0302PB11 No. of Holes 2,200 356 MODEL NOs. PB-16; PB-17 MODEL NO. PB-3 (5" X 8") Part No. 0302PB3 Size 6.3" x 4.5" 2.8" x 1.8" General purpose. Single sided pads with power bus. Similar to Radio Shack® #276-150. 1-9 10+ $0.90 $0.85 Part No. 1-9 10+ 0302PB18 $1.45 $1.35 MODEL NO. PB-19 – (2.9" X 1.7") General purpose small single sided board. Part No. 0302PB19 1-9 $1.05 MODEL NO. PB-20 10+ $0.95 (5.50" X 4.30") MODEL NO. PB-10 – (6" X 2 1/8") General purpose large single side board. Printed circuit board with layout matching solderless breadboard MB102. Features a total of 550 predrilled indexed connect points. Part No. 0302PB10 1-9 $3.25 10+ $2.65 PB-10 Part No. 0302PB20 1-9 $1.95 10+ $1.75 Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: (732) 381-1006 (732) 381-1572 121 PROTOTYPING / IC EXTRACTORS LEAD BENDING GAUGES IC EXTRACTOR Part No. 060400 060401 060404 (Insulated Handle) Fig A B A 1-9 $1.25 3.90 1.30 10+ $0.90 3.40 0.95 Fig. A Fig. B IC INSERTION / EXTRACTION TOOL Inexpensive and useful tool for inserting and extracting 8, 14, 16, 20 pin ICs. Double-sided. Forms leads quickly. Graduated in .05" increments. Radiused edges eliminate scarring of leads. Model ST accepts 1/4W and 1/2W components. Model PR accepts 1W and 2W. Part No. 060402 Part No. 0664ST010 0664PRO12 IC INSERTION TOOL Description 1 /4W, 1/2W 1W, 2W 1-9 $3.95 3.95 IC PIN STRAIGHTENER 10+ $3.75 3.75 1-9 $2.25 10+ $1.95 Inexpensive and useful tool for inserting 14 and 16 pin ICs Part No. 060403 1-9 $2.15 10+ $1.85 CAN WRENCH Straighten bent pins easily and safely. • • • • Straighten 8, 14, 16, 18, 20, 24, 28, 40, 48 pin ICs Size: 3.3" x 1.5" x 0.4" Color: black plastic Includes a ground terminal Part No. 03ICS-01 1-9 $7.95 10+ $7.70 Double end CAN socket wrench. 3/8" and 7/16", HEX. Orange, ergonomic handle. Used in placing fuses in cable terminals and connecting wires to fuses and binding posts. The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets. 7" long. Part No. 0601M216CEX • Price: $11.95 IC INSERTION AND EXTRACTION TOOL KIT 9 PIECES COMPUTER TOOL KIT ECONOMY MODEL - 12 PC. MODEL CTK1 • 2-Slotted, 2 Phillips Screwdrivers • Torque Screwdriver • Three-Claw Part Holder • Assembly Tweezers • IC Extractor • 2- Nut Drivers • Spare Parts Tube • Carrying Case Same as CTK1 with IC inserter and w/o spare parts tube. 122 1-9 $8.95 9.95 Part No. 3200CTK6 1-9 $15.95 10+ $14.95 OK INDUSTRIES INC IC INSERTER For sensitive MOS and CMOS IC's. Terminal lug for attaching ground strap (strap not included). MODEL CTK2 Part No. 3200CTK1 3200CTK2 • Six IC insertion tools for: 8; 14/16; 18/20; 22; 24/28; and 32/40-pin ICs • Universal extraction tool; PLCC IC extraction tool A 10+ 8.25 8.25 Part No. 03MOS-1416 03MOS-2428 03MOS-40 Fig. A B C 1-9 $16.50 16.50 19.95 B 10+ $15.95 15.95 18.95 ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065 C PROTOTYPING CEM-1 MATERIAL, 1/16", 1 OZ. COPPER Part No. 97BS11 97BS12 97BS13 97BS14 COPPER CLAD CIRCUIT BOARDS FR-4 (FIBER GLASS), 1/16" THICK, 1 OZ. COPPER Description 3" x 4"; single side 5" x 6"; single side 9" x 12"; single side 24" x 36"; single side 1-9 $0.95 1.95 6.50 33.95 10+ $0.90 1.80 5.95 31.95 Part No. 97BS15 97BS16 97BS17 97BD11 97BD12 97BD13 Description 3" x 4" Single Sided 5" x 6" Single Sided 9" x 12 Single Sided 3" x 4" Double Sided 5" x 6" Double Sided 9" x 12" Double Sided 1-9 $1.35 2.95 7.90 1.75 3.95 8.25 10+ $1.15 2.80 7.25 1.50 3.50 7.70 MODEL NOS. PB-14, PB-15 PRE-SENSITIZED POSITIVE Single sided pads. Four separate busses. Silkscreened legend on component side indicates foil pattern on solder side. I/O connector area. Holes provided for DB-25 footprint. • Ideal for small production runs. • Highly sensitive positive resist coated on copper foil. • Can go direct from artwork. No need to reverse artwork. • Fiberglass substrate; 1 oz. copper foil. • To develop use pos. type developer 0312-402 PHOTO RESIST PRINTED CIRCUIT BOARDS PB-14 Part No. Size 0302PB14 0302PB15 6 /16" x 3 /16" 10" x 5" 5 15 PB-15 1-9 10+ $7.50 14.95 $6.25 13.95 MODEL NO. PB-4 EDGE CARD — 6 1/2" x 4 1/2" .156" edge-connector board. Single sided pads. Four separate busses on each edge. I/O connector area. Part No. 1-9 10+ 0302PB4 $11.95 $10.50 Price $7.50 7.95 7.95 PERF BOARDS Ideal for prototyping work. .045" dia. holes on 0.1" center. 1/16" thick material (natural phenolic). No solder pads. Width and Length 3" x 4" 4" x 6" 6" x 17" No. of Holes 29 x 40 40 x 60 59 x 169 1-9 $1.90 3.75 8.50 10-99 $1.70 2.95 7.50 SNIP / CUTTER SHEET METAL, PC BOARD Metal Snip Right/Straight, Green • Useful for cutting copper clad board • 9-3/4" overall length, serrated jaws • Can use to cut 18 gauge steel LEAD FREE PROTOBOARDS Part No. 0602RLSP02 • Price: $5.95 PLCC PROTOTYPE ADAPTER PLCC Socket mounted in a circuit board for easy prototyping. 8000-45-LF • High temperature laminate for lead-free processing temperatures. 0.062" thrick • Gold plating over copper • Plated through-holes with .1" spacing • Lead-free models Part No. 038000410LF 03800045LF 03810045LF 03820045LF Description 3.9" x 5.9"-singleside 4.5" x 6.5"-singleside 4.5" x 6.5"-doubleside Part No. 03013399 03013404 03013427 PB-4 If you require a lead-free environment, these boards have replaced the old standard tin/lead finish with gold plating. Useful in developing lead-free prototypes and working with leadfree soldering techniques. Part No. 03PSPB1 03PSPB2 03PSPB3 8100-45-LF Description Price 4" x 10" Lead Free Board $24.00 4" x 5" Lead Free Board 12.50 4 x 5" LF Board with Ground Plane 12.50 4 x 5" LF Board, Ground Plane both Sides 12.50 Part No. 03PLCC1 03PLCC2 03PLCC3 03PLCC4 Description 28-Pin PLCC 44-Pin PLCC 68-Pin PLCC 84-Pin PLCC Price $10.95 10.95 15.95 19.95 SURFACE MOUNT IC ADAPTER • Convert 8 pin, 14 pin, 16 pin SOIC package to DIP package • Requires soldering Part No. 03SOPDIP16 1-9 $1.95 10+ $1.50 Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: (732) 381-1006 (732) 381-1572 123 PROTOTYPING / VISES DIP IC TEST CLIPS HELPING HAND Designed for easier DIP IC testing and troubleshooting. The heavy duty metal spring provides a firm positive grip to DIP under test. Part No. 03TC16 03TC28 03TC40-3M Description 16-Pin (used for 8, 14, 16 pin IC's) 28-Pin (used for 24, 28 pin IC's) 40-Pin Third hand for soldering, gluing, painting, and repairing. Great for holding PC boards. Adjust to any position or angle. Width 0.3" Price $12.90 0.6" 15.90 0.6" 9.90 / SURFACE MOUNT TEST CLIPS SOIC TEST CLIP 3M brand Small Outline IC test clips. Helical compression springs provide firm, positive contact pressure. Alloy (764) plated. Part No. 03TCS08N 03TCS16N 03TCS20W 03TCS24W 03TCS28W Description 8-Pin 16-Pin – Narrow 20-Pin – Wide 24-Pin – Wide 28-Pin – Wide Price $11.50 11.50 12.50 13.75 21.45 Fig B Fig C Description 48 Pin TSOP to 44 Pin PLCC to 32 Pin PLCC to 16 Pin SSOP to 8 Pin SSOP to Thru Thru Thru Thru Thru Fig D Hole Hole Hole Hole Hole Description 1-9 Helping Hand $3.50 (w/o magnifier) Complete Set 3.95 (Helping Hand/Magnifier) Fig E Fig Price A $105.00 B 99.00 C 95.00 D 93.00 E 99.00 10+ $2.95 3.50 STANDARD BASE MODEL 300, 305 Holds all regular PanaVise Head and Circuit Board Holders. Single load Control Knob and exclusive Split-Ball feature have a range of tension which permits movement of work to any desired position. This base has three mounting holes for permanent attachment to work bench or various portable Base Mounts. Description Regular Base Low Profile Base MODEL 303, 304 • Spring loaded & snap enclosures ensure surface contact • Connect SMT chips to Breadboard Fig A 060836 Part No. 03PV300 03PV305 ADAPTOR BOARDS PROTOTYPING Part No. 03GSTSOP48S 03GSPLCC44 03GSPLCC32 03GSSOP16 03GSSOP8 Part No. 060834 Price $24.49 24.49 STANDARD HEAD Jaws — 2 1/2" wide and open to 21/4". Nylon jaws have a satin finish to improve grip. This general purpose head has exceptional quality and strength. Part No. 03PV303 03PV304 Description Regular Head Low Profile Head Price $27.99 34.99 CIRCUIT BOARD HOLDER MODEL 315 It is designed to hold PC boards of any shape and size from 1/8" to 12" in width. Arm may be moved independently in either direction. BASE MOUNTS Part No. 03PV315 • Price: $35.99 308 WEIGHTED BASE 311 BENCH CLAMP BASE 312 PARTS TRAY BASE 335 MAGNETIC BASE • 3-Screw pattern accepts 201 & 300 series vise combos & bases • All vise bases mounts include three mounting screws Part No. 03PV308 03PV311 03PV312 03PV335 124 Description Weighted Base Bench Clamp base Parts Tray Base Magnetic Base Fig 308 311 312 335 Price $26.99 44.99 18.99 20.25 SELF-CENTERING EXTRA WIDE OPENING HEAD MODEL 376 Double action jaws allow fast opening and closing. The self centering feature permits holding heavier objects because weight is centered over the base. Opens to full 9". The reversible jaw pads are ribbed on one side and "V" grooved on the other. It can hold cylindrical or odd shaped items. Part No. 03PV376 • Price: $53.99 ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065 VISES PANAVISE JUNIOR MINI PANAVISE MODEL 201 COMPLETE SYSTEM Vise head and base combo. Smaller version Panavise with all “tilt, turn and rotate” features of bigger models. Grooved jaws open 2 7/8". Three plane head movement (360° rotate, 360° swival, 210° pivot). MODEL 324 This work center gives you a Circuit Board Holder (#315), Standard Base (#300), Tray Base Mount (#312) and Solder Station all in one economical package. Sturdy and stable. Part No. 03PV201 • Price: $26.99 MODEL 209 • • • • • ELECTRONIC WORK CENTER Part No. 03PV324 • Price: $89.99 VISE JR. VACUUM BASE MULTI-PURPOSE WORK CENTER COMPLETE SYSTEM Ideal for field repairs, electronics, hobbies Jaws are 2"-tall, 1"-wide and open to 2.9" Lever locks vacuum pad on any smooth surface Grooved jaws for holding small objects Single knob controls head movement through 3 planes 210° tilt, 360° turn and 360° rotation MODEL 350 This includes self centering Extra Wide Opening Head (#376), Standard Base (#300), and Tray Base Mount (#312). This unit can handle difficult to hold items Part No. 03PV209 • Price: $31.49 Part No. 03PV350 • Price: $89.99 STANDARD PANAVISE MODEL 301 COMPLETE COMBINATION RAPID ASSEMBLY CIRCUIT BOARD HOLDER MODEL 333 • The easy-to-use single knob controls head movement through 3-planes: 90° Tilt, 360° Turn & 360° Rotation • Jaws are 2.5" wide, 0.5" tall and open to 2.25" • Nylon jaws offer excellent electrical insulation and gentle = holding power • Base accepts all 300 series Heads and any 5/8" diameter post • Base features 4.3125" bolt circle countersunk for three 1/4" flat-head screws (not included) • Height: 6.25", Weight: 2.7 lbs. For quick circuit board rotation and component insertion/soldering, nothing beats this work holding tool for speed and versatility. • Features eight rotating adjustment positions at the head, six positive lock positions in the vertical plane, and variable height adjustment • Hold circuit boards up to 12" (304.8mm) wide and up to 0.156" (4mm) thick Part No. 03PV381 • Price: $87.99 Part No. 03PV301 • Price: $49.49 SWIVEL-HEAD MODEL 381 VACU-VISE MODEL 400 VACUUM BASE Hold even the most delicate work in this 360 swivel action Vacu-Vise. 90° tilting head allows for very accurate "Third Hand" control. Complete with rubber jaw covers. Jaws open to 3 inches. Zinc die cast. • Quickly attaches to any smooth non-porous surface with the flip of a lever. Take it anywhere you need it for hobbies, electronics and small home repairs • Our Vacuum Base PanaVise is widely used for portable applications • Single knob controls head movement through 3-planes: 90° Tilt, 360° Turn and 360° Rotation • Jaws are 2.5" (63.5mm) wide, 0.5" (12.6mm) tall and open to 2.25" (57.1mm) Part No. 03VV400 • Price: $34.95 Part No. 03PV381 • Price: $67.49 CIRCUIT BOARD VISE • Complete work center for placing, soldering and desoldering printed circuit boards • Spring clamps hold workpiece in place • Rotates through 360°, allowing work performance at any convenient angle • Adjustable features allow handling of variety of circuit board sizes • Socket key included • Maximum surface: 6 1/4" x 9 1/8" Part No. Description Price 03ESF120ESD Vise for holding circuit boards ESD safe $51.91 MODEL 396 WIDE OPENING HEAD • Working on large objects? The jaws on this vise open a generous 6". Ribbed neoprene jaw pads are 1.875" (47.6 mm high X 1.5" (38.1mm) wide and provide a sure grip to hold and insulate PC boards and other larger objects: reverse the pads and the wide "V" holds delicate clyndrical objects • Single knob controls head movement through 3-planes: 90° Tilt, 360° Turn and 360° Rotation Part No. 03PV396 • Price: $62.99 Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: (732) 381-1006 (732) 381-1572 125 ANTI STATIC ANTI-STATIC TABLE MAT WRIST STRAP DISSIPATIVE 3-LAYER Top layer is durable staticdissipative to discharge static charged conductors. The middle layer is a conductive that provides discharge path to ground. The bottom layer is static-dissipative foam, a durable, nonskid cushion. Includes 2 female snaps and one 15' ground cord. Part No. 03AS8211 03AS8214 Color Brown Blue Size 2' x 4' 2' x 4' Price $99.00 97.95 FIELD SERVICE KIT STATIC-DISSIPATIVE Description 24" x 24" x .02" 15" x 20" x .015" Price $69.25 77.50 STATIC CONTROL SHOE GROUNDING ASSEMBLIES Static control heel-straps provide static protection while retaining worker mobility. One size fits most shoes. Comfortable elastic ankle strap. Part No. 03AS2051 Description 1-9 Medium Size – 6' Cord $3.50 Medium Size – 10' Cord 3.95 Adjustable Band – 6' Cord 3.95 Adjustable Band – 10' Cord 4.50 10+ $2.75 3.50 3.50 3.95 • Cordless wrist strap is used in applications where wrist strap is not convenient such as working stations that require standing or walking. • Uses “SELGLARD” electric halo principle. It discharges body’s static electricity through discharge box. • Cordless wrist strap can also be used with the ground cord which can be connected to earth. * CAUTION: Not recommended for dry climate highly static sensitive applications 1-9 $6.95 10+ $6.25 ANTI STATIC GLOVES Polyester filament with woven conductive yarn. • Application: Use in different environments such as the laboratory, aeorspace, electronics and semiconductor industries. • Resistivity: 108 – 109 Ω • Slip proof Useful to alert personnel handling cartons & bags that the contents are static-sensitive. 500 labels per roll. Size: 1 3/4" x 21/2". 126 Part No. 0302-BWS150 0302-BWS160 0302-BWS201 0302-BWS203 • Material: ANTI-STATIC LABELS Description Yellow with black type The conductive elastic band is made of polyster, and woven stainless steel / nickel fibers on interior surface. • Band Resistivity: < 50Ω Part No 03UCWS4 Description Price Shoe grounding assembly w/resistor $10.95 Part No. 03ASL7102 • Material: CORDLESS* ANTI STATIC WRIST STRAP Portable lightweight kit for electronic service technician. Kit includes static dissipative work surface with pocket, adjustable wrist band and ground cords. Part No. 03AS8501 03AS8505 Protects IC's and other equipment from static discharge. Grounding cord is a coiled cord 6' or 10' long with 1MΩ resistor. Price $16.45 Part No. 03UC-AG1S 03UC-AG1M 03UC-AG1L Description Small Medium Large Price / Pair 1-9 10+ $2.50 $1.75 2.50 1.75 2.50 1.75 ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065 ANTI STATIC ANTI STATIC FIELD SERVICE KIT ANTI-STATIC FOAM ECONOMY MODEL • Provides convenient and effective ESD control workstation for field service applications. • Durable red vinyl surface provides a highly effective dissipative work mat and can be used as a carrying pouch for PC boards. • It connects easily with ground cord and an adjustable wrist strap. • Two sewn-in pockets to hold tools or components • Mat Size – 24" x 26" Part No 03UCSK1 1-9 $15.95 /4" THICK 1 Conductive antistatic foam material for bench or shipping ensures a safe work area. Part No. 0302ASF 0302ASF1 Price $9.25 11.50 11.50 4.50 Part No. 03ASB1 03ASB2 03ASB3 03ASB4 ANTI STATIC SHOE GROUNDER WITH SHIN BAND • Uses an adjustable elastic shin band. • Finger cots are widely used by technicians who handle sensitive electronic parts. • One mega ohm resistor is molded into the snap for safety. • Resistance: About 10 8 Ω / square • Resistivity: 106 Ω • Packed 100 pcs / bag 1-9 $2.95 10+ $2.50 • Application: Use to clean IC boards and parts, especially staticsensitive products. The handle is made of conductive plastic, the comb is made of conductive Nylon. • Resistivity: 104 – 106 Ω Part No 03UCBH1S 1-9 $3.50 Part No 03UCHG3 1-9 $7.95 10+ $6.50 ANTI-STATIC TOUCH PAD CONDUCTIVE BRUSH • Material: Price / Pak 1-9 10+ $1.25 $1.05 1.45 1.25 1.55 1.35 3.40 2.75 Description 5" x 10" - Regular 8" x 12" - Regular 5" x 10" - Bubble 8" x 12" - Bubble ANTI STATIC FINGER COTS Part No 03UCC1-100 10+ $0.80 8.30 Provides static protection for PC boards and components during handling and shipping. 10 pieces per pak. Make your work place safe from static discharge. Made of semiconductive vinyl that provides adequate discharging. Size / Application 11" x 22" – Keyboard 19" x 23" – CPU 24" x 24" – CPU & Keyboard 8" x 11" – Computer Mouse 1-9 $0.90 9.20 ANTI-STATIC BAGS 10+ $14.50 ANTI-STATIC WORK MATS Part No. 03ASW1 03ASW2 03ASW3 03ASW4 Size 4" x 5" 24" x 12" 10+ $2.95 • Ideal for Keyboards • Pad has 1M ohm resistance • Includes double sided tape install anywhere (keyboard etc.) Part No. 03ASTP 1-9 4.50 Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: 10+ 4.25 (732) 381-1006 (732) 381-1572 127 WIRE-WRAP WIRE WRAP SOCKETS MACHINE TOOLED HEAT TRANSFER PRESSES OPENS WIDER THAN SHOWN In addition to using for creating circuit boards, these presses have many very popular uses. Create custom T-shirts, mouse pads, magnetic material, clipboards, dry erase boards, canvas, beverage insulators, placemats, calendars, puzzles, name badges, placques, sweatshirts, sport and golf bag tags, pennants, jeans, notebooks and more. Great for fund raisers and tournaments! HOBBY LITE MODEL • 9" x 12" flat, even-heat area • Economical and perfectly suited for inkjet applications, sublimation and transfers • Lightweight and portable. 23 lbs. • Swing away design for easy layout away from heat • Full range pressure control for items up to 1" thick • Temp control from 0 – 400°F • Heat indicator light, easy to use pressure lever and sturdy support base 03HOBBYLITE 03SWINGMAN15 03B250 Hobby Lite heat press 9” x 12” SwingMan 15 heat press 15” x 15” Cap Press 8 14 16 18 20 24 28 40 1-9 10+ $0.65 1.20 1.25 1.40 1.60 1.90 2.30 2.75 $0.60 1.10 1.10 1.30 1.50 1.80 2.10 2.50 Part No. Description 19ID08 19ID14 19ID18 19ID20 19ID22 19ID24 19ID28 19ID40 8 Pin ID (10 pak) 14 Pin ID (10 pak) 18 Pin ID (05 pak) 20 Pin ID (05 pak) 22 Pin ID (05 pak) 24 Pin ID (05 pak) 28 Pin ID (05 pak) 40 Pin ID (05 pak) Prices $3.50 3.50 3.50 3.50 3.50 3.75 3.50 7.50 WITH WIRE WRAP TERMINALS Price $375.00 720.000 640.00 Call for pricing on any other HIX products not listed here 128 No. of Pins 19ICW08-M 19ICW14-M 19ICW16-M 19ICW18-M 19ICW20-M 19ICW24-M 19ICW28-M 19ICW40-M BANANA JACKS B-250: CAP PRESS • Turn caps into walking advertising for your customers, teams, and more! • Lightweight and portable for use at malls, flea markets, shows, and more. • Sturdy design with a strong support base. • Interchangeable lower platen for ball, golf (standard), or youth caps. • Features include pressure adjustment, 60 second autoreset timer, thermostat (from off to 450 degrees F), heat indicating light, and handy cap holding device. Description Part No. I.D. TAGS FOR WIRE WRAP SOCKETS SWINGMAN 15 MODEL • 15" x 15" flat even-heat area • Transfers items up to 11⁄2" thick • Temp control 0 – 450°F • Full range pressure adjustment • Indicator light goes off when set temp is attained • Sturdy, but portable at 58 lbs. • Applies all types of transfers. Great for laying out numbers and letters • 120V, 12.5A, 1500W Part No. 3 LEVEL Part No. Description Color 1-9 10+ 034005-0 034005-2 034022-0 034022-2 Regular Regular Mini Mini Black Red Black Red $2.95 2.95 1.99 1.99 $2.55 2.55 1.70 1.70 4005 4022 AC-ELECTRIC POWERED WIRE WRAP TOOL The 120 Volt 6000 series electric wire wrapping and unwrapping tools have been designed for production and field service operations where wire sizes 18 to 32 AWG are used. • • • • • • Fast Operation Ergonomically Designed Lightweight Lexan Housing Unique Positive Indexing Mechanism Standard 20 Foot Power Cord 90 Day Warranty Part No. 03SP6021 03BR224 03S171 03BR2426 03S159 03BR30 03S93 Description Wire Wrap Tool 22-24 AWG Bit Sleeve For 22-24AWG Bit 24-26 AWG Bit Sleeve For 24-26 AWG Bit 30-32 AWG Bit Sleeve For 30-32 AWG Bit ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065 Price $235.00 29.00 14.50 22.00 13.25 31.50 16.95 WIRE-WRAP WIRE WRAP TOOL – ECONOMY WIRE WRAP WIRE Strips, wrap and unwrap 30 Ga. wire. 30 AWG WIRE WRAP SOLID WIRE Part No. 27001WWRD 27003WWRD 27001WWBK 27003WWBK 27001WWOR 27003WWOR 27001WWBL 27003WWBL 27001WWBR 27003WWBR 27001WWGN 27003WWGN 27001WWYL 27003WWYL 27001WWGR 27003WWGR Color Red Red Black Black Orange Orange Blue Blue Brown Brown Green Green Yellow Yellow Gray Gray MODEL Length 100' 1,000' 100' 1,000' 100' 1,000' 100' 1,000' 100' 1,000' 100' 1,000' 100' 1,000' 100' 1,000' Prices $5.95 38.00 5.95 38.00 5.95 38.00 5.95 38.00 5.95 38.00 5.95 38.00 5.95 38.00 5.95 38.00 Part No. 03WTE 1-9 $9.95 10+ $9.50 WIRE WRAP TOOLS OK INDUSTRIES INC. WSU-30 Regular Wrap WSU-30M Modified Wrap (One Extra Turn of Insulated Wire) Hand wrapping, stripping and unwrapping tools. Strips, wraps, and unwraps. For AWG 30 wire on .025" square post. Part No. 03WSU-30 03WSU-30M 1-9 $26.95 29.90 10+ 26.00 28.90 OK INDUSTRIES INC WRAP / STRIP / UNWRAP TOOLS Produce perfect wire wrapped connections. Precision, long-lasting tools for use where occasional wraps are required or where power wire-wrapping tools are not practical. Compact and convenient. Switch from wrapping to unwrapping simply by unscrewing the cap and reversing the shaft from one end to the other. Regular Wrap Tool Modified Wrap Tool • Regular and modified wrap models. • 22 AWG, 24 AWG, 26 AWG, 30 AWG models. • Color coded for various wrap sizes. Part No. 03HSR30 03HSR224 03HSM24 03HSM26 03HSM30 Description Regular Wrap 30 AWG Regular Wrap, 22-24 AWG Modified Wrap, 24 AWG Modified Wrap, 26 AWG Modified Wrap, 30 AWG Price $22.50 22.95 39.95 39.95 28.95 Part No. 03HWUW20 03HWUW224 03HWUW26 WIRE WRAP KIT Includes: Manual wire wrap gun Holster Wire Stripper Part No. 03KTW224 03KTW2426 Price $79.00 79.00 79.00 Ideal for prototyping work. .045" dia. holes on 0.1" center. 1/16" thick material (natural phenolic). No solder pads. Part No. 03013399 03013404 03013427 (1) Hand Wrap Tool (1) Bit and Sleeve Set Description Wire Wrap Tool Kit – 22-24 AWG Wire Wrap Tool Kit – 24-26 AWG Description 20 AWG 22-24 AWG 26 AWG PERF BOARDS These complete telecom wire wrap tool kits are designed to provide field service with tools necessary to perform regular wraps, unwrapping and wire stripping in two different gauge sets – 22 and 24 or 24 and 26. Kit (1) (1) (1) WRAPPING AND UNWRAPPING TOOLS Price $245.00 240.00 Width & Length 3" x 4" 4" x 6" 6" x 17" No. of Holes 29 x 40 40 x 60 59 x 169 1-9 $1.90 3.75 8.50 10-99 $1.70 2.95 7.50 VECTOR WIRE WRAP TERMINALS Part No. 2404T44 2404T49 1-9 $13.50 15.90 10+ $11.90 14.95 Packed 100 pieces per bag Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: T44 (732) 381-1006 (732) 381-1572 T49 129 PCB DEVELOPMENT DRY CONCENTRATED ETCHANT Anhydrous Ferric Chloride in vapor-tight package. The 1/4 lb. package produces 1 pint which will etch approx. 200 sq. inches of standard copper board. Part No. 03ER3 03ER21 Description 1 /4 lb. 1 lb. 1-11 $4.95 12.95 12+ $4.75 11.95 NEGATIVE PHOTO RESIST – ER-71 A liquid cinnimate resist in bottle with pump sprayer. May also be flowed on. The coated board is exposed to UV through a negative of the circuit pattern, then developed in ER-8 liquid. One bottle coats 1700 square inches. Part No. 03ER71 1-11 $9.50 12+ $8.50 NEGATIVE RESIST DEVELOPER A solvent blend that will develop ER-71 and other negative-acting photo resists. 16 oz. Part No. 03ER8 1-11 $5.50 12+ $4.50 POSITIVE TYPE DEVELOPER CONCENTRATE For developing Datak precoated PC boards. Developer is mixed 3 parts tap water to 1 part concentrate. Ten fully diluted ounces will develop between 12 and 22 square feet of precoated board (depending upon circuit density). This mild sodium hydroxide solution with additives may be flushed down drain after use. Part No. 0312-402 0312-404 Description 2 Ounce Concentrate 4 Ounce Concentrate Price $6.95 13.90 TINNIT TIN PLATE ™ Tinnit will plate a copper clad board with a bright tin plate approx. .0004" thick. Enhances solderability, resists oxidation. Also use on card edge contact fingers. Supplied as a dry concentrate; just add water. One pint plates up to 600 sq. inches of copper. May be used to plate some other metals such as brass, bronze, iron; anything more active than tin. Plating is complete in about 10 minutes in a fresh solution, Tinnit™ is supplied as a dry mixture with indefinite shelf life. When mixed with water, the solution has approximately a 2 month life. ™ Part No. 03ER18 03ER181 130 Description 1 Pint Size 1 /2 Gallon Size 1-11 $6.50 16.00 12+ $5.50 14.00 PC BOARD DESIGN AND FABRICATION KIT This kit includes PCB layout software plus material and instructions to make your own printed circuit boards. No dark room processing needed. Included in Kit: • Board Creator Software • Press-N-Peel image transfer film • Etching solution • Copper clad boards • Software manual • Complete instructions for making PC boards • More than 100 hobby circuits on CD Features of the Board Creator Software included in this kit • Boards up to 10’ x 8’ up to 6 layers with 8 masks each • Built-in print queue up to 10 masks • User selectable cursor layout grid up to 1 mil resolution. Items not limited to grid • Full surface mount device support • Multiple line widths, from 0.001 to 0.255 inches wide • Up to 10 different pad shapes and sizes • Locates and displays errors on-screen Part No. 32AMSPCBDFKIT • Price: $145.00 ETCHING SOLUTION HEATER Fits in tank and heats solution up to 100°F (38°C). Used to further reduce etching time. Built-in adjustable thermostat controls temperature continuously to 100°F (38°C). 120V AC / 100 W Max. Part No. 03ESH • Price: $19.95 POWER ETCH PUMP The etch pump and distributor tubing may be used to accelerate etching and free you from some of the constant agitating of the etch solution. Bubbles provide both agitation and also some oxygen which enhances the process. Part No. 03ER12 1-11 $9.95 12+ $8.95 EXPOSURE KIT Includes major components needed to expose presensitized copper-clad boards. Comes complete with stand, light fixuture and exposure tube. Part No. 03416X 03416B Description Exposure Kit Replacement Exposure Bulb Price $47.95 7.95 ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065