Small Installation Distribution Board
Flush-mounted
Flush-mounted
Cavity
wallwall
Cavity
Flush-mounted and cavity wall design
The new form of harmony – the new concept of ABN
small distribution boards:
in tune with practical requirements
developed with practical
expert knowledge
designed as energy and multimedia
distribution boards
easy change of door
hinge without needing to
disassemble the frame
compact design, with 30% more
space for wiring
installation time and costs now
significantly reduced
designer door handle; different
colours, solid sealable lock,
smooth opening
spacer for surface
compensation in
case of difficult
plaster conditions
connecting bar for
the series installation of several distribution boards
2
easy alignment
by means of integrated level tube
device section
symmetrically
expandable from
12 to 14 modules
per 18 mm
securely anchored cavity wall
mounting claws and strain relief
lugs (for cavity wall installation)
wall mounting claws for adjustment
and nail brackets for mounting
(for flush-mounted installation)
lasered and thus
easily legible
electric circuit
numbering and
type plate
more space for wiring above the
built-in units
simple insulated top hat rail structure
cable inlet
valve with one-click
locking mechanism, with
pre-shaped lamellas
ventilation slots
more space for
terminals and
wiring due to new
geometry of the
cover
new PE/N plug terminals
far more flexible terminal
mounting
more RCD circuits due to additional
mounting support points
simple locking bar
mechanism of the
hood
new RCD-N screw
terminal
high number of
marking slots
additional positions
for terminals
3
Flush-mounted and cavity wall design
Multimedia small distribution board for communication
devices
as multimedia distribution board the centre
of communication components:
● Telephone connection
● TCU box
● Router
● TV or SAT distribution
● ISDN adapter
● Server
● Splitter
● Patch module
● ...
holding position
for lateral wiring
fixation
perforated mounting plate
made either of plastic or of
sheet steel (accessory)
door with ventilation
slots
double socket
with EURO2
adapter
device mounting
rail and mounting
plate for different
mounting options
4
equipotential
terminal
quite big, the little one
5
Flush-mounted and cavity wall
Small installation distribution board, IP 30,
V
DE
up to 63A
built according to DIN VDE 0603, DIN 43871
❏ Easy exchange of door hinges without needing to disassemble the frame;
❏ Wall box made of plastic with device mounting rail made of sheet steel, depth: 88/90 mm
internal turn-snap lock
❏ N/PE plug terminals (screw terminals on request) touch-safe with easy-to-mount snap-on
❏ Flat door lock with turn-snap lock; can be easily replaced with a
mechanism
conventional key lock (similar design)
❏ N-RCD expansion terminal; included in standard scope of delivery for lateral snap-on mounting
❏ Device cover with cut-out for 12 modules (symmetrically expandable to 14);
for distributors with 2, 3 and 4 rows
❏ Device cover with cut-outs; height: 46 mm
sealable, 2-point-mounting; screw-less sliding mechanism
❏ Frame with door made of sheet steel; colour: RAL 9010, pure white
❏ Suitable for built-in devices up to a depth of 70 mm
❏ Electrical circuit markings
Flush mounted: ❏ Wall mounting claws for adjustment and nail brackets for mounting
Cavity wall:
❏ As for flush mounted, 4 cavity wall mounting claws and cable straps
Flush-mounted installation
Rows
Dimensions H x W x D in mm
Design
Frame
Niche dimensions
1
H: 400
W: 365
D:
9
H: 393
W: 340
D: 90
with N/PE plug terminal
3 x 2,5 - 25 mm2 each
and 14 x 1,5 - 4 mm2 each
2
H: 525
W: 365
D:
9
H: 518
W: 340
D: 90
with N/PE plug terminal
3 x 2,5 - 25 mm2 each
and 14 x 1,5 - 4 mm2 each
additional N-RCD terminal 3 x 16, 2 x 10 mm2
3
H: 650
W: 365
D:
9
H: 643
W: 340
D: 90
with N/PE plug terminal
6 x 2,5 - 25 mm2 each
and 28 x 1,5 - 4 mm2 each
additional N-RCD terminal 3 x 16, 2 x 10 mm2
4
H: 775
W: 365
D:
9
H: 768
W: 340
D: 90
with N/PE plug terminal
6 x 2,5 - 25 mm2 each
and 28 x 1,5 - 4 mm2 each
additional N-RCD terminal 3 x 16, 2 x 10 mm2
Modules
per
18 mm
Type*
12/14
AP12UP
24/28
AP24UP
36/42
AP36UP
48/56
AP48UP
Modules
per
18 mm
Type*
Cavity wall installation
Rows
Dimensions H x W x D in mm
Frame
* All types also available with screw terminals.
6
Design
Cut-out dimensions
H: 360
with N/PE plug terminal
W: 323
3 x 2,5 - 25 mm2 each
and 14 x 1,5 - 4 mm2 each
D: 88
1
H: 400
W: 365
D:
9
2
H: 525
W: 365
D:
9
H: 485
W: 323
D: 88
with N/PE plug terminal
3 x 2,5 - 25 mm2 each
and 14 x 1,5 - 4 mm2 each
additional N-RCD terminal 3 x 16, 2 x 10 mm2
3
H: 650
W: 365
D:
9
H: 610
W: 323
D: 88
with N/PE plug terminal
6 x 2,5 - 25 mm2 each
and 28 x 1,5 - 4 mm2 each
additional N-RCD terminal 3 x 16, 2 x 10 mm2
4
H: 775
W: 365
D:
9
H: 735
W: 323
D: 88
with N/PE plug terminal
6 x 2,5 - 25 mm2 each
and 28 x 1,5 - 4 mm2 each
additional N-RCD terminal 3 x 16, 2 x 10 mm2
12/14
AP12HW
24/28
AP24HW
36/42
AP36HW
48/56
AP48HW
Technical data is subject to change without notice. Images only serve to illustrate.
Flush-mounted and cavity wall
Multimedia small distribution board equipped with mounting plate for communication devices
❏ Wall box made of plastic, depth: 88/90 mm
❏ Frame with door (with ventilation slots); colour: RAL 9010, pure white
❏ Easy exchange of door hinges without needing to disassemble the frame;
internal turn-snap lock
❏ Flat door lock with turn-snap lock; can be easily replaced by a conventional key lock
(similar design)
❏ Device mounting rail made of steel sheet and perforated mounting plate
❏ Suitable for built-in devices up to a depth of 80 mm
❏ Wall mounting claws for adjustment and nail brackets for mounting
(for flush-mounted installation)
❏ 4 cavity wall mounting claws and cable straps (for cavity wall installation)
Flush-mounted installation / cavity wall installation
Rows
Dimensions H x W x D in mm
Frame
Design
Type
Niche dimensions Cut-out dimensions
for flush mounting for cavity wall
3
H: 650
W: 365
D:
9
H: 643
W: 340
D: 90
H: 610
W: 323
D: 88
First row: top hat rail,
second and third row: perforated mounting AP36TK
plate for telecommunication devices,
double socket,
equipotential terminal,
door with slots at the bottom and the top
4
H: 775
W: 365
D:
9
H: 768
W: 340
D: 90
H: 735
W: 323
D: 88
First row: top hat rail,
second and third row: perforated mounting AP48TK
plate for telecommunication devices,
double socket,
equipotential terminal,
door with slots at the bottom and the top
Technical data is subject to change without notice. Images only serve to illustrate.
7
Flush-mounted and cavity wall
Accessories
Description
Type
Plug terminals
3 x 2.5 - 25 mm2 each
and 14 x 1.5 - 4 mm2 each
PE and N plug terminal
two-part N plug terminal
APZPEN
APZNN
6 x 2.5 - 25 mm2
and 28 x 1.5 - 4 mm2
PE plug terminal
N plug terminal
APZPE
APZN
RCD-N terminal
3 x 16.2 x 10 mm2 contact points,
touch-proof, mountable at the sides
of the AMIGO+ wall box
Type
Door with ventilation slots
incl. frame
3 rows
4 rows
APZTKU36
APZTKU48
Mounting plate, perforated
made of steel sheet
for 3-row small distribution boards
for 4-row small distribution boards
APZM3
APZM4
APZFIN
RCD-N terminal
4 x 10 mm2 contact points, touch-proof,
mountable on device mounting rail
AZN3
Control terminal, 7 poles
can be snapped onto device mounting rail
XSK70
Device mounting rail
35 x 7.5 mm2
Description
Mounting plate, perforated
APZM1KP
made of plastic
height: 125mm
for 3-row small distribution boards (order 2 pcs.)
for 4-row small distribution boards (order 3 pcs.)
Cable inlet valve
(spare part)
for flush-mounted distribution boards
for cavity wall distribution boards
APZWS1U
APZWS1H
APZHS
Device mounting rack
incl. device mounting rails
Cavity wall anchor kit (spare part)
4 cavity wall anchors
APZASHW
for 2-row AMIGO+
for 3-row AMIGO+
for 4-row AMIGO+
APZTR2
APZTR3
APZTR4
Flush-mounted installation kit
(spare part)
2 wall mounting claws for the
pre-adjustment of the wall box and
4 nail brackets for mounting
APZMKNL
Cover strips
for covering device slots
GBS24W
Door hinge (spare part)
(1 set = 2 pieces)
APZRS
Cover strips
with ventilation slots
GBS26
Connection bracket
for 2 housings (2 pieces)
AVK2
Double Schuko socket
without cover
incl. mounting material and
Euro2 adapter
for mounting on
perforated mounting plates
XSD2K90
Schuko socket
single socket, for mounting on device
mounting rails
XSD11
Designer door handle (spare part)
white
APZTGR2
Designer door handle
orange – black
APZTGR1
Door lock
quick lock
APZTU1
Spacer (spare part)
space expansion of the frame
(for flush-mounted installation)
+ screw
APZPA
Technical data is subject to change without notice. Images only serve to illustrate.
8
Amigo the reliable surface-mounted
Small installation distribution board, IP 30,
Housing
❏ Distribution bottom plate made of plastic, fixation for inlet and outlet cables
as well as pre-stamping for rear and lateral cable insertion as standard
❏ Pre-stamping for cable ducts
❏ PE/N terminal with ± screws, touch-proof with easy-to-install latching
mechanism of the PE+N carrier
❏ Additional RCD-N terminal for designs with 2 rows and more
❏ Device series for 12 modules (expandable to 14)
V
DE
up to 63A,
built according to DIN VDE 0603, DIN 43871
❏ For built-in devices from 51 to 68 mm. With lowered device mounting rail
(accessory) also suitable for built-in devices up to 95 mm
❏ Colour: RAL 9016, standard white
Doors:
❏ Made of steel plate, coated with plastic. Door equipped with flush designer
handle which can be folded back as standard
❏ Door opening angle more than 180º
❏ Door hinge left or right, as desired
❏ Colour: RAL 9016, standard white
Surface-mounted installation
Rows
Dimensions H x W x D in mm
Housing
Door
PE and N terminal Modules
for each distriper
bution board
18 mm
Type
Housing
Door
1
300 x 245 x 106
298 x 189 x 9
Inlet:
2x2x25 mm2
Outlet:
2x11x16 mm2
12/14
A12A
AT12A
2
300 x 370 x 106
298 x 314 x 9
Inlet:
2x2x25 mm2
Outlet:
2x15x16 mm2
24/28
A24A
AT24A
3
300 x 495 x 106
298 x 439 x 9
Inlet:
2x2x25 mm2
Outlet:
2x33x16 mm2
36/42
A36A
AT36A
4
300 x 620 x 106
298 x 564 x 9
Inlet:
2x2x25 mm2
Outlet:
2x33x16 mm2
48/56
A48A
AT48A
Accessories
Description
Type
Description
Partition, horizontal
for surface-mounted Amigo small distribution
boards, for horizontal separation
AZA10
Device mounting rail, lowered
AZG1
Preis/
for surface-mounted Amigo small distribution boards,
Stück
for expanding the installation depth by 20mm
Partition, vertical
for surface-mounted Amigo small distribution
boards, for vertical separation
1 row
2 rows
3 rows
4 rows
EUR
Designer door handle (spare part)
AZTGR1
for surface-mounted Amigo small distribution boards
AZA1
AZA2
AZA3
AZA4
PE and N plug terminals with
carrier (spare part)
for surface-mounted Amigo small
distribution boards
1 and 2 rows, 14 plug terminals each for
PE and N
AZ17PN
3 and 4 rows, 27 plug terminals each for PE AZ27P
3 and 4 rows, 27 plug terminals each for N AZ27N
RCD-N terminal
4 x 10 mm2 contact points, touch-proof,
mountable on device mounting rail
Type
AZN3
Door lock
for surface-mounted Amigo small
distribution boards
quick lock with different locks
AZTA1
AZTA2
Transparent door
for surface-mounted Amigo small distribution boards
1 row
2 rows
3 rows
4 rows
AZTS12A
AZTS24A
AZTS36A
AZTS48A
Mounting plate
for surface-mounted Amigo small distribution boards
1 row
2 rows
3 rows
4 rows
AZM1
AZM2
AZM3
AZM4
Technical data is subject to change without notice. Images only serve to illustrate.
9
Continuity
Continuity
For over 60 years, ABN Braun AG has upheld a company tradition of continuity, which will be maintained going into the future.
1947
Albert Braun founded the company as an electric shop
in Neuenstadt
1951
Werner Braun joined the family business
1962
ABN developed and distributed electric meter cabinets
– first for individual needs, and later also for retail
1979
Founding of ABN Werner Braun GmbH
1990
After German reunification, ABN founded manufacturing plants in East Germany, creating valuable jobs
1992
The sons Andreas and Marcus Braun joined
1997
35 years of ABN systems engineering
2006
ABN became a corporation: ABN Braun AG
2007
Takeover of trademark rights, patents and production
tools from the GEYER company
2012
●
ABN manufactures at two locations in Germany, utilising state-of-the-art equipment
●
This helps to achieve highest quality, flexibility and
efficiency
●
ABN has over 200 patents and utility models at its
disposal
●
ABN employs 240 people directly and an additional
300 through subcontracting
Neuenstadt plant
Nuremberg plant
Werner Braun
Chief Executive Officer
Nossen (near Dresden)
Andreas Braun
Chief Technology Officer
Dahlewitz (near Berlin)
Marcus Braun
Chief Administration Officer
ABN is a medium-sized family business led by the board members
Werner Braun, Andreas Braun, Marcus Braun and Roland Schmiederer.
This secures long-lasting and competent continuity in the executive tier.
10
Roland Schmiederer
Chief Officer Nuremberg
Innovation
Innovation
The innovative power of ABN Braun AG is shown through
our constant enhancements and inventions of products and
product lines.
1995
ABN installed the first solar-powered electric car charging station in Berlin. The city administration provided
electric cars that could be used by the public
1996
The KURA system hit the market – setting new standards for electric meter cabinet technology
ABN developed a new small distribution board called
Amigo – my friend in form. A great design and easy to
install
2007
Founding of a company to manufacture filters. The prevention of air pollution and environmental protection
gained importance
Integration of System GEYER into ABN's product line.
Thus, ABN became THE specialist for INDOOR and
OUTDOOR
2011
ABN won the IF award for good industrial form for its
FIKS distribution cabinet system
ABN developed and distributed its own eHZ, an electronic household meter
2011
The PROFIKS system revolutionised meter board and
distribution technology. An all-purpose system
Developed an enhanced meter board and distribution
technology called ESPRO
2012
Joint founding of ERSOL, Erfurt. The first 40 Million
solar cells are manufactured.
ABN's small distribution board was relaunched and
reinvented under the name AMIGO+
2012
The new flat installation distributor with a depth of only
110 mm sets new standards in flush-mounting and
cavity-wall mounting
1962
Installation of the first ABN electric meter cabinet
1977
New guidelines of the VDE (German Association for
Electrical, Electronic & Information Technologies) forced
electric meter cabinet manufacturers to develop radical
innovations
1978
1981
1984
1991
1993
1984
ABN built the first 100 charging stations for electric cars
and supplied this modern technology to municipalities
We bundle energies:
Innovative business policies have been and will always be at the center of ABN's continued
success. Our clients in the electrical trade can always count on our practical product developments.
11
Welcome to ABN, to the
center
of
energy
Daimlerstr. 10 - 12
D-74196 Neuenstadt
Phone: +49 (0) 71 39 / 94 - 0
Fax:
+49 (0) 71 39 / 94 - 49
E-Mail: abn@abn-elektro.de
www.abn-electro.com
099119001 11/12
ABN Braun AG