www.zephyronline.com
Protective Vinyl Cover
Vinyl Cover
AK0636AB
AK0642AB
AK0648AB
Hood Compatibility
AK7836ASX
AK7842ASX
AK7848ASX
READ AND SAVE THESE INSTRUCTIONS
top of hood
9/16” below
top of hood
9” below
top of hood
FRONT OF HOOD
17 7/16” below
top of hood
5/8” from
side of hood
!
Fig.01
WARNING: Remove hood cover before operating grill.
Note: Range hood must be installed prior to installing
the protective vinyl cover.
Step1:
Mark wall in 3 places on the left and right sides of
hood as shown in Fig. 01
Step 2:
Use #6 flat-head screws to secure buttons to wall at
marked locations. Fig. 02 Determine the length of
screws for your application (minimum 1/2”). Wall
anchors may be necessary in some applications. Purchase screws and wall anchors separately.
SIDE
OF
HOOD
Slide vinyl cover over hood and snap onto buttons.
Fig.02
SEP08.0101 © Zephyr Corporation