PROJECT INFORMATION
SIMPLESEAL™
Job Name
CSEFL SERIES – HID FLANGE MOUNT – EXTENDED FLANGE
Fixture Type
Catalog Number
Approved by
PRODUCT FEATURES:
»»Recessed flange mount – 12×12", 16×16", 24×24"
»»Extruded aluminum extended flange assures seal
against rough ceilings
»»One-piece doorframe provides air-tight integrity
of luminaire
SPECIFICATIONS
HOUSING: 20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
HOUSING FLANGE: Heavy duty extruded marine grade aluminum with anodized finish.
DOORFRAME: Heavy duty extruded marine grade aluminum with anodized finish. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured
to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (4) for 12×12 and 16×16, (8) for 24×24. Doorframe Gasket: One-piece closed cell
extruded nitrile gasket seals doorframe to housing flange.
BALLAST 12×12 ONLY: Type as specified – see ordering information. All fluorescent ballasts UL listed class P. All HID ballasts UL listed HPF type. See options listing for alternates.
LAMPS: Quantity and type as specified – see ordering information. All lamps supplied by others.
LENS: 12×12: 125" #12 high impact acrylic lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. 16×16 and 24×24: .156" C73
tempered glass lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. L­ ens orientation – smooth side out. See Options for alternate
lens selections. If required, specify lens overlay combinations inner/outer (Example: R/T). Inner lens must be glass.
ELECTRICAL: Type as specified – see ordering information. All fluorescent ballasts UL listed class P. All HID ballasts UL listed HPF type. See Options listing for alternates. Mogul base lamps only.
INSTALLATION: Adjustable swing-out mounting brackets standard.
LISTINGS: UL and CUL Listed for Wet Locations. UL Classified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved. FED-STD 209E/Class 100 (ISO5) Cleanrooms.
IP65
ISO 5
Class 100
CCEA
Approved
ORDERING INFORMATION (Ex: CSEFL1212-1-26Q-RS-1-277-AF-2H-T-FS)
Model
Lamp Qty/Type
Ballast Type
Model
CSEFL121212"×12"
CSEFL161616"×16"
CSEFL242424"×24
Lamp Qty/Lamp Type
12×12
1-13E 13 Watt (4) Pin Twin
2-13E 13 Watt (4) Pin Twin
1-13Q 13 Watt Quad
2-13Q 13 Watt Quad
1-26Q 26 Watt Quad
2-26Q 26 Watt Quad
1-50S† 50 Watt HPS
1-50M†50 Watt MH
1-70S† 70 Watt HPS
1-70M†70 Watt MH
1-25I† 25 Watt Incandescent (A-19)
1-40I† 40 Watt Incandescent (A-19)
1-60I† 60 Watt Incandescent (A-19)
1-75I† 75 Watt Incandescent (A-19)
1-100I†100 Watt Incandescent (A-19)
Ballast Qty
Voltage
Lamp Qty/Lamp Type cont'd.
16×16
1-50S One 50 Watt HPS
1-50M One 50 Watt MH
1-70S One 70 Watt HPS
1-70M One 70 Watt MH
1-100S One 100 Watt HPS
1-100MOne100 Watt MH
1-150S One150 Watt HPS
Doorframe Option
Lens Type
Doorframe/Flange Options
AF Anodized Aluminum (STD)
PAF .063" Painted Fabricated Aluminum
Lens Type
Acrylic
T
.125" Clear
Housing Options
2H 18-Ga CRS (STD)
5H 20-Ga Type 304 SS
XH 20-Ga Type 316 SS
Polycarbonate
G
.125" Clear
24×24
1-150S 150 Watt HPS
1-250S 250 Watt HPS
1-250M250 Watt MH
1-400S 400 Watt HPS
1-400M400 Watt MH
Options
Tempered Glass
R
.156" C73 Glass
Specified Lens
SL Specified Lens
Options
ELt* Standard Lumen EL Pack
PEL* High Lumen EL Pack
SEL * Specified EL Pack
DLNt*LED Night Light w/Light Level Control (100%-20%)
FS
Fuse & Holder
HJ
Sealed Wireway
t
PF Plaster Frame
l
QR Quartz restrike system for maximum
100 Watt DC Bayonet Quartz Lamp
QS l Quartz Socket Only
t
RF * Radio Frequency Filter
TNt* 5/7/9 Watt Night Light (FL)
TH
1/2" Trade Size Threaded Hub
PF t Plaster Frame
UV UV Filtering Lens (Specify)
Ballast Type (12×12 only)
Fluorescent only
RS
Rapid Start Electronic <10% THD (CFL)
SB
Specified Ballast
HID only See Specifications
SB
Specified Ballast
Ballast Quantity
1One
2Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
www.kenall.com
Housing
† Glass interior lens required
* Fluorescent only
t
12×12 only
l
n/a with 12×12
P: 800-4-Kenall
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.
CSEFL_1212_1616_2424-021914
For additional photometry, go to www.kenall.com
SIMPLESEAL™
CSEFL SERIES – Technical Data
DIMENSIONAL DATA
GASKET PROFILE
CROSS SECTION
CEILING CUTOUT
Ceiling Line
C
Doorframe
Gasket
A
D
B
DIMENSIONAL DATA (IN INCHES)
A B
12×12
16×16
24×24
4.8313.75×13.75
12.3916.75×16.75
16.0024.90×24.90
www.kenall.com
CD
13.20 13.20
16.20 16.20
24.35 25.68
P: 800-4-Kenall
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.
CSEFL_1212_1616_2424-101113