Naru™ - Symmons

advertisement
Naru™
Widespread Lavatory Faucet SLW-4112
Installation and Service Instructions
 Need Help?
Tools & Materials
Model Numbers
SLW-4112 Lavatory faucet with
chrome finish and
includes pop-up drain
Contact Symmons customer service at
P: (800) 796-6667, F: (800) 961-9621
Email: gethelp@symmons.com
e
Pip nt
la
Sea
Alternate Finish Codes
-STN Satin Nickel
-PNL Polished Nickel finish
- Chrome (standard)
3/32"
Plumbers
Putty
1
2
3
4
Monday - Friday 7:30 am - 7:00 pm EST
 Please check Symmons website
for technical help, the latest product
information and warranty policy.
www.symmons.com/service
Quick Install Guide Naru Widespread Lavatory Faucet, SLW-4112
Step 2
Attach faucet handles
Step
Step 13
Attach faucet spout
Step 1
Attach control valves to sink
Step
Step 14
Connect hoses between
valve and spout
Step
Step 19
Connect supply lines
and check for leaks
NonRemovable Removable
stopper
stopper
HOT
COLD
Step 8
Flush water supply lines
before attaching
(reference installation details)
Step 7
Connect lift rod, clevis strap,
pivot rod and adjust linkage
Step 5
Fasten drain body and
tail piece to sink
Step 6
Install stopper and pivot
rod to drain body
Installation Instructions
Installation Instructions
Caution: If replacing an older faucet ensure water supply is
turned OFF before removing. Then open faucet valves to relieve
water pressure.
Step 4 Connect hoses between valve & spout
Step 1 Attach control valves to sink
Deck Front View
HOT COLD
valve valve
e
Pip lant
a
Se
screw down until
thread stops
Required rotational swing
clearance at base of spout is
4 inches (100 mm) minimum.
Step 5 Fasten drain body to sink
Step 2 Attach faucet handles
OFF
position
flange washer
*(optional)
3/32" Allen
wrench
1
*use included flange
PLUMBERS
PUTTY
CW=OFF
washer only when
plumbers putty is
not available
CCW=OFF
2
Step 3 Attach faucet spout
flange
beveled
washer
back of sink
friction
washer
flange nut
flat edge
front of sink
tail
piece
bottom
view
Page 2
teflon
tape
back
of sink
Step 6 Install stopper and pivot rod to drain
Step 9 Connect supply lines, check for leaks
easily
non
removable removable removable
1
HOT
Care of faucet finish
■■ Clean finish area by using mild soap and water or nonabrasive cleaner and then rinse immediately. A non-abrasive
wax may be used to preserve finish area.
e
Pip nt
la
Sea
2
COLD
Valve cartridge replacement
Step 7 Connect lift rod and adjust linkage
3/32" Allen
wrench
3
1/2" (13 mm)
1
2
3 mm" Allen
wrench
Drain body
17 mm deep
socket wrench
Step 8 Flush supply lines before attaching
Important
Ensure supply lines
are flushed clean
before attaching to
control valves.
Replacing handles
Supply hoses
not included.
OFF
position
3/32" Allen
wrench
OFF
position
HOT
COLD
OFF
Page 3
OFF
Dimensions Naru Widespread Lavatory Faucet, SLW-4112
16"(406 mm) max.
8"(203 mm) min.
4" (102 mm) min.
2-7/8"
73 mm
2-1/4" dia.
(57 mm)
2-1/4" ( 73 mm)
Deck thickness
5/16” (8 mm) min.
2-3/8" (60 mm) max.
2" dia.
(51 mm)
3-1/2"
89 mm
2-7/8"
73 mm
5"
128 mm
Hole size
1-3/8" (35 mm) min.
1-1/2" (38 mm) max.
7/8" dia.
(21 mm)
Hole size
1-1/4" (32 mm) min.
1-5/8" (41 mm) max.
1-1/2"
38 mm
5-1/2"
(139 mm)
1-1/8" dia.
(28 mm)
Flexible hose
1/2"-14 NPSM
5/8" (15 mm)
Note: Dimensions subject to change without notice.
Parts Assembly Naru Widespread Lavatory Faucet, SLW-4112
Replacement Parts
lift rod
LN-625-KIT*
Part Number
spout
WSF-412L-KIT*
handle assy.
1 ea. / kit
LN-625-KIT*
faucet handle
(reference table)
flow regulator
handle is used in
either hot or cold
locations
2.2 gpm (8.3 L/min)
(factory installed)
mounting sleeve
KN-114-EXT-KIT
HOT cartridge kit
OFF=CW
valve cartridge
(reference table)
spout base KN-113-EXT-KIT
LN-625-KIT*
COLD cartridge kit
OFF=CCW
gasket
retainer
gasket
retainer nut
flange nut
valve body (hot)
flexible hose assy
stopper
P-100N*
pop-up drain
assembly
RL-154LR*
includes stopper
Valve body
(cold)
Item
LN-532
FLR-103-1.5
FLR-103-1.0
* Note:
handle
screw
collar
(1)
Note (1) screw requires
3/32" Allen wrench
(2)
screw
cartridge extension
KN-113
identified
by groove
Note (2) screw requires
3mm Allen wrench
flow regulator
2.2 gpm (8.3L/min)
1.5 gpm (5.7L/min)
1.0 gpm (3.8L/min)
When ordering parts for faucets with an
optional decorative finish, append appropriate
three letter finish suffix code to part numbers
marked with an asterisk (*).
1/2 inch
brass coupling nut Ordering replacement parts:
(used in rigid piping Call Symmons customer service at (800) 796-6667
M-F 7:30 am - 7:00 pm EST or check our website
installations only)
at www.symmons.com for a list of Symmons distributors.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Website: www.symmons.com ■ Email: gethelp@symmons.com
© 2015 Symmons Industries, Inc. Printed in U.S.A.
■
ZV-589 REV C
■
043015
Download