YS65-1015
"Y" (WYE) STRAINER
TITAN
®
TITAN FLOW CONTROL, INC.
ANSI CLASS 600
f
BUTT WELD ENDS
f CARBON
AND STAINLESS STEEL
MODELS: YS 65-CS
( carb o n steel )
YS 65-SS
3" YS 65-CS
( stainless steel )
F
SI ZE RANGE: 1/2" ~ 12"
F E ATURES
s
l a r g e s t r a i n i n g c a pa c i t y
wit h its large b o dy an d si z able straining element , t h e y s 65 pro v i d es e x cellent
T
TECHNICAL
o pen area rati o s t h at are t y pically tw o - an d - a - h alf times larger t h an t h e
c o rresp o n d ing pipeline .
s precision
m a c h i n e d s e at s
precisi o n mac h ine d screen seats in b ot h t h e b o dy an d cap h elp to ensure
accurate p o siti o ning o f t h e screen d uring reassembly after cleaning .
PRESSURE/ TEMPERATURE RATING
CS - ASTM A216 GR. WCB - CLASS 600
als o ,
t h e mac h ine d b o dy seats enable finer filtrati o n b y pre v enting d ebris b y pass .
s
e n c a p s u l at e d
the
" cg "
"cg"
style gasket
st y le c o v er gas k et pro v i d es a d d iti o nal ra d ial strengt h to pre v ent
gas k et bl o w o ut .
s self-cleaning
it als o acts as a c o mpressi o n sto p .
WOG (Non-shock): 1480 PSI @ 100 °F
PRESSURE/ TEMPERATURE RATING
SS - ASTM A351 GR. CF8M - CLASS 600
c a pa b i l i t y
wit h a tappe d npt bl o w - o ff c o nnecti o n , t h is unit can be fitte d wit h a bl o w d o wn valv e w h ic h facilitates cleaning o f t h e straining element .
please
c o ntact facto ry f o r m o re inf o rmati o n .
s
WOG (Non-shock): 1440 PSI @ 100 °F
e p ox y pa i n t e d
carb o n steel units are ep ox y painte d to h elp resist rust an d c o rro si o n .
titan
fci als o o ffers ep ox y c o ating as an o pti o n f o r t h e y s 65 .
s
o p t i o n a l c ov e r d e s i g n s
titan ' s y s 65 is available wit h d ifferent c o v er o pti o ns inclu d ing swing , clamp ,
an d h inge t y pe c o v ers .
please c o nsult facto ry f o r m o re inf o rmati o n o n t h ese
APPLICATIONS
o pti o ns .
A
c a r b o n s t e e l p r o p e rt i e s :
c o ntinu o us serv ice .
h a z ar d s .
•
•
•
The above listed temperatures are theoretical and
may vary during actual operating conditions.
Carbon Steel not recommended for prolonged use above 800 °F.
Stainless Steel not recommended for prolonged use above 1000 °F.
carb o n steel perf o rms e x cepti o nally well in h ig h temperatures , up to 8 0 0 ° f in
it pro v i d es h ig h resistance to s h o c k , v ibrati o n , piping strains , an d fire an d free z ing
carb o n steel strainers are o ften use d in t h e o il an d petro c h emical in d ustries .
s ta i n l e s s s t e e l p r o p e rt i e s :
1000° f in c o ntinu o us serv ice .
p h armaceutical in d ustries .
stainless steel is c o mm o nly specifie d f o r h ig h temperature serv ice , up to
stainless steel strainers are c o mm o nly f o un d in t h e c h emical , f o o d , an d
The above da ta re presents co mmon ma rket an d se r vice a p p l i c a t i o n s . N o re p re s e n t a t i o n o r g ua ra n t e e , e x p re s s e d o r i m p l i e d , i s g i v e n d u e t o t h e n u m e ro u s
var iations of co ncentrations , te mperatures an d fl ow co nd i t i o n s t h a t m ay o c c u r d u r i n g a c t u a l s e r v i c e .
TITAN FLOW CONTROL, INC.
YOUR PIPELINE TO THE FUTURE!
Tel: 910-735-0000 s Fax: 910-738-3848 s titan@titanfci.com s www.titanfci.com
290 Corporate Drive s PO Box 7408 s Lumberton, NC 28358
YS65-1015
WYE STRAINER
YS 65-CS - (Carbon Steel)
YS 65-SS - (Stainless Steel)
TITAN FLOW CONTROL, Inc.
TITAN
®
290 Corporate Drive
Lumberton, NC 28358
Tel: 910.735.0000
E-mail: titan@titanfci.com
Web: www.titanfci.com
Fax: 910.738.3848
ANSI Class
600
Butt Welded Ends • Carbon & Stainless Steel
A
BILL OF MATERIALS (1)
1.
2.
3.
4.
5.
YS 65-CS (5)
YS 65-SS
1
Body (2)
Carbon Steel
A216 Gr. WCB
Stainless Steel
A351 Gr. CF8M
2
Cover
Carbon Steel
A216 Gr. WCB
Stainless Steel
A351 Gr. CF8M
3
Straining
Element (3)
Stainless Steel
Stainless Steel
4
Gasket (3) (4)
Stainless Steel
"CG" Style
Stainless Steel
"CG" Style
5
Studs
Alloy Steel
Stainless Steel
6
Nuts
Carbon Steel
Stainless Steel
7
NPT Plug
Blow-off
Carbon Steel
Stainless Steel
Bill of Materials represents standard materials. Equivalent or better materials
may be substituted at the manufacturer's discretion.
Available in additional body materials, such as LCB, WC6, WC9, 316L, Alloy 20, and Monel.
Denotes recommended spare parts.
The cover gasket is encapsulated in a machined recessed seat. A wide range of gasket materials are available; contact factory.
Carbon Steel bodies are epoxy painted.
Request gauge taps when
required. Contact factory
for more information.
B
PART
C
No.
D
Exploded View
1
5
3
ANSI Class
600 Butt Welded
4
ends have a schedule
of 80. Contact factory for
other available schedules.
Illustrations are representative of
sizes 2" through 12". Please ask for
certified drawings when required.
6
7
2
DIMENSIONS AND PERFORMANCE DATA (1)
SIZE
A DIMENSION
FACE TO FACE (2)
B DIMENSION
CENTER LINE TO BOTTOM
C DIMENSION
SCREEN REMOVAL
D NPT Plug
BLOW-OFF
ASSEMBLED WEIGHT
APPROXIMATE
Flow Coefficient
in
mm
in
mm
in
mm
in
mm
in
mm
lb
kg
½
15
6.62
168
3.50
89
5.00
127
3/8
10
C/F
C/F
9
Cv
¾
20
8.31
211
3.75
96
5.00
127
1/2
15
C/F
C/F
18
1
25
8.31
211
3.75
96
5.00
127
1/2
15
C/F
C/F
30
1¼
32
10.12
257
5.5
140
8.00
203
1/2
15
C/F
C/F
C/F
1½
40
10.25
260
5.5
140
8.00
203
1/2
15
C/F
C/F
42
2
50
11.0
279
7.0
178
10.00
254
1/2
15
15
6.8
70
2½
65
12.00
305
8.25
210
12.50
318
1
25
30
13.6
110
3
80
13.50
343
9.25
235
14.50
368
1
25
33
15.0
160
4
100
17.938
456
12.5
318
19.5
495
1 1/2
40
77
34.9
260
5
125
22.25
565
15.00
381
23.00
584
2
50
C/F
C/F
400
6
150
25.62
651
20.00
508
31.00
787
2
50
217
98.4
570
8
200
31.75
806
24.00
610
38.50
978
2
50
386
175
950
10
250
37.68
957
28.50
724
45.50
1156
2
50
C/F
C/F
1600
12
300
45.50
1156
34.50
876
52.00
1321
2
50
C/F
C/F
2200
1. Dimensions and weights are for reference only. When required, request certified drawings.
2. Face to face values have a tolerance of ±0.06 in (±2.0 mm) for sizes 10" and lower and a tolerance of ±0.12 in (±3.0 mm) for sizes 12" and larger.
REFERENCED STANDARDS & CODES
PRESSURE - TEMPERATURE RATINGS
CODE
DESCRIPTION
ASME/ANSI B16.25
Buttwelding Ends
ASME/ANSI B16.34
Flanged, Threaded, and Welding End
Carbon Steel
A216 Gr. WCB ANSI Class 600
Carbon Steel not recommended
for prolonged use above 800°F
SOURCE: ASME/ANSI B16.1
1800
1/2" - 4"
Liquid
Open Area
Steam
Open Area
1/16 (.0625)
41%
1/32 (.033)
28%
5" - 8"
1/8 (.125)
40%
3/64 (.045)
36%
10" - 12"
1/8 (.125)
40%
30 Mesh Lined
44.8%
Pressure (PSI)
Size
Stainless Steel
A351 Gr. CF8M ANSI Class 600
Stainless Steel not recommended
for prolonged use above 1000°F
1500
STANDARD SCREEN SELECTIONS
1200
900
600
300
PRESSURE - TEMPERATURE RATING
Body Material
A216 Gr. WCB
A351 Gr. CF8M
WOG (Non-shock):
1480 PSI @ 100 °F
1440 PSI @ 100 °F
0
-100
50
200
350
500
650
800
950
1100
Temperature (°F)
Titan FCI makes every effort to ensure the information presented on our literature accurately reflects exact product specifications. However, as product changes occur, there may be short-term differences between actual product
specifications and the information contained within our literature. Titan FCI reserves the right to make design and specification changes to improve our products without prior notification. When required, request certified drawings.