New Products
New product
MN3E00/MN4E00 Series
Individual wiring
specifications
3,4 PORT PILOT OPERATED VALVE MN3E00/MN4E00 SERIES
Best suited for
minimum space
installation!
The individual wiring
specification is added to
7-mm pitch
MN3E00/4E00 series.
Occupied space
%
24
reduced
b a
b a
b a
b a
b a
b a
b a
(Length: 40% reduced)
D-sub connector specification
compared with the same
station no. configuration
The additional individual wiring series eliminates the
necessity of the wiring block achieving better space saving.
Specifications
Items
Descriptions
Electric specifications
Descriptions
Descriptions
Max. working pressure MPa
0.7
Rated voltage
Min. working pressure MPa
0.2
Voltage fluctuation range
±10%
Proof pressure
1.05
24 VDC
0.017
12 VDC
0.033
MPa
Ambient temperature
°C
5 to 55
Fluid temperature
°C
5 to 55
Degree of protection
Holding current A
V
Dust proof
24 VDC
Power
consumption W 12 VDC
Vibration resistance
m/s2
50 or less
Thermal class
Shock resistance
m/s2
300 or less
Surge suppressor
Atmosphere
Not suitable for use in areas containing corrosive gas
Indicator
Be sure to read the cautions on the “Pneumatic valves”
(catalog No. CB-023SA) before starting use.
DC 12, 24
0.4
B
Zener diode
LED
CC-1204A
MN3E00/MN4E00 Series
How to order Also read Pneumatic Valves (Catalog No. CB-023SA)
<Example of model no.>
Discrete valve block
H
Type
3
Option
Voltage
J
Block manifold
A
Valve types
B
E
Solenoid position
C
D2
7
Manual
override
I
F
Port size
3
Station no.
Wiring method
F
Wiring method
Blank Valve block for reduced wiring
D2
<Example of model no.>
D20
MN3E00660-C4-D2-7-3
A Valve type:
3 port valve, two 3 port valve integrated type
●
B Solenoid position:Two 3 port valve integrated type (NC/NC)
●
D21
D22
D23
(Differential pressure return)
C Port size:
ø4 push-in fitting, horizontal
●
E Manual override: Locking/non-locking common type (with manual
●
override cover)
F Wiring method: Individual wiring type
●
H Option:
None (Note 1)
●
I Station no.:
7
●
J Voltage:
24 VDC
●
D2N
D3
Individual wiring type
MN 3 E00 66 0 C4
Discrete valve block
D2
Block manifold
N 3 E00 66 0 C4
D-connector 300 mm
D-connector 500 mm
D-connector 1000 mm
D-connector 2000 mm
D-connector 3000 mm
D-connector without socket
D-connector with socket and terminal
Note on model no. selection
Note 1:The individual wiring type and the built-in low-heat and power-saving type
cannot be selected simultaneously.
Dimensions
12.5
Indicator light
9.3 6 7
Manual override section 6.6
15.5
9.3
a b a b a b a b a
11.2
40
0.5
Lead wire
Connection key
11.8
14
27.5
77
5.5
N4E0020D
N4E0020D
N4E0020D
N4E0020D
N4E0010D
49.5
8
L1 = (7 × n) + (15.5 × m) + 31.2
L3 = L2 - 12.5
L2
2
3
4
5
15.7
17
19.5 13.5
1
Push-in fitting ø4
Push-in fitting ø4
2
Push-in fitting ø6
Push-in fitting ø6
No.
1
Part name
End block L
2
Valve block
3
Supply and exhaust block
4
End block R
5
DIN rail
MN3E00/MN4E00 Series
Combination of individual wiring and reduced wiring (mix manifold)
Inputs can be made individually from another system which is
independent from the common wiring for reduced wiring.
<Example of model no.> Also read Pneumatic Valves (Catalog No. CB-023SA)
Block manifold
MN 4 E00 8 0 C4
A
Valve types
B
D
8
Pressure adjustment function
Solenoid position
C
M T6G1 D2 W F
R
E
I
Manual override
Port size
F
H
Wiring method
(Note 1)
G
3
Station no. J Voltage
Option (Note 3)
Terminal / connector pin
array (Note 2)
Note on model no. selection
Note 1 : If TX is selected for the wiring method, individual wiring cannot be selected.
Note 2: Double wiring cannot be selected for discrete individual wiring valve block.
Note 3: For individual wiring, the low-heat and power-saving type cannot be selected simultaneously.
Manifold internal wiring with reduced wiring mixed
Caution
The internal circuit of the individual wiring valve block is completely separated from the reduced wiring electric
circuit in the manifold. Even if the individual wiring valve block is inserted between the reduced wiring valve blocks,
the pin array on the electrical block side will not change.
Electrical block Supply and exhaust
Double
a
Individual double
Double
a
b com
b com
Single
a
com
Double
a
b com
a com b
2 4 6 8 10
1 3 5 7 9
com
The pin array on the electrical block side is in order from the first station except for the indivisual wiring.
Related components
Socket assembly for electric supply (for individual wiring)
N4E00 SOCKET
A
D
300
A
Type (Note 1)
B
Lead wire length
B
Type
S
2 wire (for single solenoid)
D
3 wire (for double solenoid)
Lead wire length
300
300 mm
500
500 mm
1000
1000 mm
2000
2000 mm
3000
3000 mm
Note 1:The type without lead wire is N4E00-SOCKETSET. (3 contacts attached, applicable wire size:
AWG#26 to 28)
3
MN3E00/MN4E00 Series
Manifold specifications
* MN3E and MN4E series in common.
MN3E/MN4E series manifold specifications
Contact
Quantity
Set
Delivery date
Slip No.
/
Issue
/
/
Your company name
Order No.
Contact
Manifold model no. (When mixing the dummy block, select mix manifold and fill in the station number including dummy block.)
Order no.
7/10 mm-pitch Mix manifold
For the manifold model no.,
refer to Pneumatic Valves
(No.CB-023S).
EX0
MN
70 mm-pitch Manifold
E00
MN
10 mm-pitch Manifold
E0
MN
0
For the manifold model no.,
refer to Pneumatic Valves
(No.CB-023S).
0
For the manifold model no.,
refer to Pneumatic Valves
(No.CB-023S).
H Option
I Station
Pressure E Manual F Wiring G Terminal and
override
no.
connector pin
adjustment
method
function
array
- When completing this form, select the type from the “Block configuration” ( Pneumatic Valves (CB-023SA)).
- Complete from the left end, with the piping port on the near side, regardless of the electrical block method.
A
/
Model no.
B
Solenoid
position
Port size
C
D
J
Voltage
Layout position
Product
Model No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Quantity
Wiring block N4E0-T
N4E0-T
Arrangement specification when individual wiring mixed*
Valve
block
7 mm pitch
NE000NE000NE000NE000-
Valve
block
10 mm pitch
N E00N E00N E00N E00-
Dummy
block
N4E0-MPS
Supply and
exhaust
block
N4E0-Q
-
-
-
N4E0-Q
-
-
-
N4E0-Q
-
-
-
Regulator
block
N4E0-R --
N4E0-MPD
N4E0-R -N4E0-R -N4E0-E
N4E0-E
Mounting rail L2 =
Blanking plug (push-in fitting)
ø1.8
ø3
ø4
ø6
Silencer
ø8
ø6
Barbed thread fitting for ø1.8 tube (10 pcs./1 set)
N4E0-JOINT-PTN2-M3
N4E0-JOINT-PTN2-M5
Socket assembly for electric supply (for individual wiring and AUX)
Fill in the integral
multiple of 12.5.
Cable with D-sub connector
N4E0-JOINT-PTN2-6
N4E0-SOCKET-
-
3M0-SOCKET-SET
N4E00-SOCKET-
-
N4E00-SOCKET-SET
Push-in fitting tube removal tool
□ Not required (check)
ø8
N4T-CABLE-D0-
Connector for electrical block TM1
Accessories
End
block
N4E0-TM-CONNECTOR
The goods and their replicas, or the technology and software in this catalog are subject to export regulations by Foreign
*The input number of individual wiring is 16 points for the wiring method T** mixed with indivisual wiring.
Exchange
and
of Japan.
If TX is selected
forForeign
the wiring Trade
method,Law
individual
wiring cannot be selected.
The law requires a license from Ministry of Economy, Trade and Industry to export them.
Head Office・Plant
Sales And Marketing Div.
Overseas Sales Administration dpt.
Tokyo Branch Office
Nagoya Branch Office
Osaka Branch Office
2014
2-250, Ouji, Komaki, Aichi 485-8551
2-250, Ouji, Komaki, Aichi 485-8551
2-250, Ouji, Komaki, Aichi 485-8551
4F, Bunkahousou Media Plus, 1-31-1, Hamamatsu-cho,
Minato-ku, Tokyo 105-0013
2-250, Ouji, Komaki, Aichi 485-8551
1-3-20, Tosabori, Nishi-ku, Osaka 550-0001
TEL(0568)77-1111
TEL(0568)74-1303
TEL(0568)77-1338
TEL(03)5402-3620
FAX(0568)77-1123
FAX(0568)77-3410
FAX(0568)77-3461
FAX(03)5402-0120
TEL(0568)74-1356 FAX(0568)77-3317
TEL(06)6459-5770 FAX(06)6446-1945
2014.8