QuickConnect
Quick-Connect Plumbing Products
Catalog and Price List
Effective February 29, 2016
Watts .com
Sizing Matrix
Example: 3575-10 = Series 35, Type 75, 1⁄2" CTS
1⁄4 OD = 04
1⁄8 NPT/S = 02
⁄ CTS = 08 3⁄8 OD = 06
1⁄4 NPT/S = 04
⁄ CTS = 10 3⁄4 CTS = 14 1⁄2 OD = 08
3⁄8 NPT/S = 06 7⁄16 UNS = 01 1 CTS = 18 1⁄2 NPT/S = 08 3⁄4 NPT/S = 12
3⁄4 CL = 13
3⁄4 GHT = 14
1 NPT/S = 16
38
12
⁄ Hose Barb = 08
⁄ Hose Barb = 12
1 Hose Barb = 16
12
34
LEAD FREE *
Before using standard material product for potable water systems consult
your local water authority and building & plumbing codes. Interpretation
of the new federal Lead Free law, effective January 4, 2014, may vary
according to local governing authorities.
*The wetted surface of this product contacted by consumable water contains less than
0.25% of lead by weight.
Electronic
is Green!
For the latest Watts pricing information in electronic
format, visit our Data Exchange at:
www.wattswater.com/dataexchange
• Download product and list price data in .csv, .pdf, .tsv, .xls and .xml formats
• Easy access to list price data for business systems
• Sign up for e-mail alerts when data is updated
• Access other Watts Water Technologies brands pricing data
Table of Contents
Terms & Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Technical Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
TYPE
DESCRIPTION
PAGE
Series 10
Tees
Type 23
Type 24R
Elbows
Type 17
Type 17R
Type 18
Type 19
Connectors
Type 15
Type 15R
Type 10
Type 01
Stems
Type 14R
Type 27
Stops
Type 45
Valves
Type 39
Type 62
Type 53
Tee - Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tee - Reducing . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Elbow - Union . . . . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Reducing Union . . . . . . . . . . . . . . . . . . . .
Elbow - Stackable . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Male . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
8
8
8
Connector - Union . . . . . . . . . . . . . . . . . . . . . . . .
Connector - Reducing Union. . . . . . . . . . . . . . . . .
Connector - Female . . . . . . . . . . . . . . . . . . . . . . .
Connector - Male. . . . . . . . . . . . . . . . . . . . . . . . .
9
9
9
9
Stem - Reducing . . . . . . . . . . . . . . . . . . . . . . . . . 10
Stem - Male . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
End Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Valve - Union Stop . . . . . . . . . . . . . . . . . . . . . . . . 10
Valve - Male Stop. . . . . . . . . . . . . . . . . . . . . . . . . 10
Valve - Female Angle Stop . . . . . . . . . . . . . . . . . . 10
Series LF47
Tees
Type 23
Type 24R
Type 26R
Type 32
Elbows
Type 17
Type 17R
Type 18
Type 19
Type 20
Type 21
Type 22
Connectors
Type 01
Type 10
Type 15
Type 15R
Type 16
Ends
Type 45
Ball Valves
Type FBV
Tee - Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tee - Reducing . . . . . . . . . . . . . . . . . . . . . . . . . .
Tee - Double Reducing . . . . . . . . . . . . . . . . . . . .
Tee - Slip Repair . . . . . . . . . . . . . . . . . . . . . . . . .
11
11
11
11
Elbow - Union. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Reducing Union . . . . . . . . . . . . . . . . . . . .
Elbow - Stacking . . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Male . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Female . . . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Drop Ear . . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Union 45° . . . . . . . . . . . . . . . . . . . . . . . .
12
12
12
12
12
12
12
Connector - Male. . . . . . . . . . . . . . . . . . . . . . . . .
Connector - Female . . . . . . . . . . . . . . . . . . . . . . .
Connector - Union . . . . . . . . . . . . . . . . . . . . . . . .
Connector - Reducing Union. . . . . . . . . . . . . . . . .
Connector - Slip Repair Union. . . . . . . . . . . . . . . .
13
13
13
13
13
End - Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TYPE
DESCRIPTION
PAGE
Series 35—continued
Type 01
Connector - Male. . . . . . . . . . . . . . . . . . . . . . . . . 18
Type 10
Connector - Female . . . . . . . . . . . . . . . . . . . . . . . 18
Type 13
Connector - Hose Barb Fittings. . . . . . . . . . . . . . . 18
Type 14
Connector - Reducing Stems. . . . . . . . . . . . . . . . . 18
Type 15
Connector - Union . . . . . . . . . . . . . . . . . . . . . . . . 18
Type 15R
Connector - Reducing Union. . . . . . . . . . . . . . . . . 19
Type 27
Connector - Male Stem. . . . . . . . . . . . . . . . . . . . . 19
Type 28
Connector - Female Stem. . . . . . . . . . . . . . . . . . . 19
End Stops
Type 45
End Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Valves
Type 39
Valve - Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Type 39R
Valve - Reducing Stop . . . . . . . . . . . . . . . . . . . . . 20
Type 40
Valve - Union Check . . . . . . . . . . . . . . . . . . . . . . 20
Type 41
Valve - 3-Way Bypass . . . . . . . . . . . . . . . . . . . . . 20
Type 43
Valve - Stackable. . . . . . . . . . . . . . . . . . . . . . . . . 21
Type 50
Valve - Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Type 52
Valve - Female In-Line . . . . . . . . . . . . . . . . . . . . . 21
Type 53
Valve - Female Angle. . . . . . . . . . . . . . . . . . . . . . 21
Type 54
Valve - Female Angle. . . . . . . . . . . . . . . . . . . . . . 21
Type 55
Valve - In-Line. . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Type 56
Valve - Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Type 58
Valve - Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Type 61
Valve - Adapter Stop. . . . . . . . . . . . . . . . . . . . . . . 22
Miscellaneous
Type 47
Collet Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Type 159
O-Ring Assembly. . . . . . . . . . . . . . . . . . . . . . . . . 22
Type 161
Cone Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Type 162
Pipe Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Manifolds
Type 89
Manifold Single Union Body. . . . . . . . . . . . . . . . . . 23
Type 90
Manifold Single Stem Body - Right . . . . . . . . . . . . 23
Type 91
Manifold Single Stem Body - Left . . . . . . . . . . . . . 23
Type 81
Manifold Single Side Mounting Kit. . . . . . . . . . . . . 23
Type 83
Manifold Dual Union Body. . . . . . . . . . . . . . . . . . . 23
Type 84
Manifold Dual Stem Body. . . . . . . . . . . . . . . . . . . 23
Type 80
Manifold Dual Side Mounting Kit. . . . . . . . . . . . . . 24
Manifold Accessories
Type 82
Manifold Divider Plug . . . . . . . . . . . . . . . . . . . . . . 24
Type 85
Manifold Return End. . . . . . . . . . . . . . . . . . . . . . . 24
Type 86
Manifold Label Plate - Red . . . . . . . . . . . . . . . . . . 24
Type 87
Manifold Label Plate - Blue. . . . . . . . . . . . . . . . . . 24
Type 88
Manifold Valve Repair Kit . . . . . . . . . . . . . . . . . . . 24
Type 80-MT
Manifold Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Type 14
Reducing Stem. . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Type 46
End Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Manifold Installation Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Manifold Assembly Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27
Manifold Style Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29
Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Series 35
Tees
Type 23
Type 24R
Type 26
Type 30
Type 33
Type 34
Elbows
Type 17
Type 18
Type 21
Type 19
Type 20
Tee - Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tee - Reducing . . . . . . . . . . . . . . . . . . . . . . . . . .
Tee - Double Reducing . . . . . . . . . . . . . . . . . . . .
Tee - Male Thread . . . . . . . . . . . . . . . . . . . . . . . .
Tee - Stackable . . . . . . . . . . . . . . . . . . . . . . . . . .
Tee - Stackable Branch. . . . . . . . . . . . . . . . . . . .
15
15
15
15
16
16
Elbow - Union . . . . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Stackable. . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Drop Ear . . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Male . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Elbow - Female Swivel . . . . . . . . . . . . . . . . . . . . .
17
17
17
17
17
1
Terms and conditions
PL-QuickConnect
FREIGHT TERMS:All shipments are F.O.B. shipping point. Shipments from factory less than 1000 lbs. are F.O.B. factory. Factory shipments of $2500 and over
within the continental U.S.A. will be prepaid and allowed when made at the lowest motor carrier transportation rate.
TERMS OF SALE: All sales are F.O.B. shipping point.
PAYMENT TERMS:The invoices are due and payable 30 days from the date of invoice.
PURCHASE Orders submitted on customer’s own purchase order forms will be accepted only with the express understanding that no statements, clauses, ORDER FORMS: or conditions contained in said order form will be binding on the Seller if they in any way modify the Seller’s own terms and conditions of sales.
SPECIAL PRODUCTS: Orders for special or modified products are non-cancelable.
LIMITED WARRANTY: A. Watts Regulator Co. (“Watts") warrants its WaterPEX® cross-linked polyethylene tubing, barbed PEX fittings, brass and plastic QuickConnect fittings and manifolds, factory manufactured copper manifolds and Quick-Connect accessories to be free of defects in material and workmanship
when used under normal usage in potable water systems, and installed in accordance with all Watts printed installation instructions. Specific warranty durations apply as follows:
1.Watts WaterPEX® cross-linked polyethylene (non-barrier PEX) pipe, brass and plastic barbed PEX fittings, and factory manufactured copper manifolds
when installed as a system using Watts WaterPEX pipe, Watts brass or plastic barbed PEX fittings, and Watts factory manufactured copper manifolds for a
period of twenty-five (25) years from the date of original shipment.
2.Watts WaterPEX® cross-linked polyethylene (non-barrier PEX) pipe, when installed with brass or plastic barbed PEX fittings manufactured by others that
meet the applicable ASTM Standards (brass - ASTM F 1807) (plastic - ASTM F 2159) for a period of ten (10) years from the date of original shipment.
3.Watts WaterPEX® brass or plastic barbed PEX fittings and factory manufactured copper manifolds when installed with cross-linked polyethylene (nonbarrier PEX) pipe manufactured by others that meet the ASTM F 876 requirements for a period of ten (10) years from the date of original shipment.
4.Series 10, 35, and 45/LF45 Quick-Connect fittings and manifolds for a period of twenty-five (25) years from the date of original shipment.
5.All other valves and accessories sold under the Watts WaterPEX or Watts Quick-Connect brand name for a period of two (2) years from the date of original
shipment.
Watts’s obligation will be to repair or replace, at its discretion, any of these products proven to be defective in material or workmanship when these products are covered under this limited warranty.
B.In the event of a system malfunction or leak caused by defective Watts warranted materials (and not by incorrect installation, incorrect handling procedures or by jobsite or installation damage), a reasonable pre-approved amount will be allowed for repair materials and repair labor. In the event of a
leak occurring in a factory manifold, you may contact Watts for either a free replacement manifold or any parts reasonably needed to repair such a leak
(freight prepaid). Note that Watts limits its warranty to its tubing, valves and accessories, fittings and manifolds. Watts does not warrant the connection
on any installation, as the integrity of the connection is subject to the workmanship of the contractor/installer. The connection is the sole responsibility
of the person who installs it.
C.In order to qualify for a warranty remedy under paragraph B, you must contact Watts in advance and receive a written authorization for this remedy
from an authorized Watts representative. Repair materials, repair labor and freight expenses not authorized in writing in advance by Watts in this way
will not be compensated.
D.To qualify for the warranty described above, you must do the following:
1.Use good construction techniques to install our materials, as specified in our current design and installation guidelines and technical notes. This must
include field pressure testing our warranted materials before they are covered by concrete or otherwise made inaccessible.
2.Install Watts WaterPEX® and Watts Quick-Connect materials according to all guidelines and manuals published by Watts.
3.Install Watts WaterPEX® and Watts Quick-Connect products in a system that will not operate at temperatures or at pressures that exceed the rating printed on the tubing.
4.The Watts warranted product must be installed in compliance with local building and plumbing codes.
E.Evidence of tampering, mishandling, neglect, accidental damage, freeze damage or unauthorized repairs that cause damage to Watts’s warranted
products will void any warranty coverage for those particular products. All field connections are specifically excluded from the terms of this warranty.
F.Watts provides a complete plumbing system offering so that it is possible to complete an installation with Watts products. However, it is possible that
other manufacturers’ tubing and/or fittings may be installed in any given installation. Providing that the tubing and/or fittings are manufactured to their
applicable ASTM standards, and have been certified by a recognized third-party testing agency, the Watts product in the given installation will continue to be covered under this warranty. In the event of a system malfunction or leak that has other tubing and/or fitting manufacturers’ components
installed within the failed system, Watts will be responsible only for proven defects in material or workmanship in the Watts products. Products manufactured by another company should be reported to that manufacturer for its warranty response.
G.Disclaimer of Warranty. THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY WATTS WITH
RESPECT TO THE PRODUCTS LISTED IN PARAGRAPH A. WATTS MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. WATTS HEREBY
SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
H.Limitation of Liability. The remedy described above shall constitute the sole and exclusive remedy for breach of warranty, and, apart from that remedy,
Watts shall not be responsible for any incidental, special or consequential damages, including without limitation, lost profits or the cost of repairing
or replacing other property which is damaged if these warranted products do not work properly, other costs resulting from labor charges, delays,
vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, adverse chemical environments, or any other
circumstances over which Watts has no control. This warranty shall be invalidated by any abuse, misuse, misapplication or improper installation of
the product. Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of
incidental or consequential damages. Therefore the above limitations may not apply to you. This Limited Warranty gives you specific legal rights, and
you may have other rights that vary from state to state. You should consult applicable state laws to determine your rights. SO FAR AS IS CONSISTENT
WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL
SHIPMENT.
I.RETURNED GOODS: No material shall be returned without authorization. When credit is issued it will be at the price charged, or prevailing price if lower,
less handling charges based on costs of reconditioning, boxing, etc. However, a minimum 25% handling charge will apply. A minimum handling charge of
$20.00 is applied whenever the 25% handling deduction does not total $20.00. Products which are obsolete or made to special order are not returnable.
NOTE: Prices and terms are subject to change without notice and supersede all previous quotations. The right is reserved to change or modify product design
or construction without prior notice and without incurring and obligation to make such changes and modifications on products previously or subsequently sold.
2
Technical Information – Series 10
Material Specifications
Watts Quick-Connect Series 10 products are designed and manufactured
to be trouble free for many years of service life. Series 10 products are
designed and manufactured in polypropylene, a high performance thermal
plastic material. All Series 10 products are approved and certified to NSF61-G. Series 10 products are available in standard imperial inch sizes. The
Watts Quick-Connect design allows for quick and easy connections without
installation tools. Simply cut the plastic or copper piping and snap a Watts
Quick-Connect fitting in place for a zero leak connection.
Body:Polypropylene
Collet:Acetal
O-Ring:EPDM
Spacer:Acetal
Fitting Performance
Series 10
Max.
Max.
Min.
150psi @ 70ºF
60psi @ 140ºF
33ºF @ 0.5ºC
(10.3 bar @ 20ºC)
(4.1 bar @ 60ºC)
Thread Torque Values
Size
⁄ ", ⁄ " (3.8mm)
3⁄8", 1⁄2" (10, 15mm)
18
14
Max. Torque Values
13.3 in - lbs. (1.5 Nm)
26.6 in - lbs. (3.0 Nm)
Approvals
FDA: Watts Series 10 fittings are produced from
FDA approved materials.
NSF/ANSI 61-G: Watts Series 10 products are tested,
certified, and approved for contact with drinking water.
Lead free product is certified to NSF/ANSI 372 and conforms with the
lead content requirements for lead free plumbing as defined by California,
Vermont, Maryland, and Louisana state laws and the U.S. Safe Drinking
Water Act.
*The wetted surface of this product contacted by consumable water
contains less than 0.25% of lead by weight.
Watts Quick-Connect fittings are designed for low pressure fluids. For
other applications please refer to our Technical Service Department.
Tubing should be supported at minimum of 36" to prevent excessive load
to the connectors. Do not install tubing supports closer than 3 inches from
the connector ends. We strongly recommend that new installations be
thoroughly tested prior to use. Do not use with explosive gases, petroleum
products, or other fuels.
! CAUTION
The polypropylene material used in the Quick-Connect fittings can be compromised by exposure to volatile organic compounds (VOC’s) and caustic chemicals. Therefore,
DO NOT expose this product to any such chemical or foreign substance,
which would include exposure to the following products: Pipe Dopes
(thread sealants), bug sprays, lubricants, cleaners, paints, bleaches,
acids, solder fluxes, plastic piping primers and cements, oxidizing agents,
alkaline solutions, thinners, fuels, oil based caulks, hydrocarbons, spray
foam of foaming agents (insulation).
Watts recommends that all fittings and parts be stored in their original
packaging until installation to protect the fitting internals from dirt and
debris that may cause damage to the o-ring and the o-ring guide.
It is also recommended that all threaded connections be made with Teflon®
tape only.
Failure to follow these instructions will void the warranty and possibly result
in leaks and water damage.
3
Technical Information - Series 35
Material Specifications
Watts Quick-Connect fittings are designed for low pressure fluids. For
other applications please refer to our Technical Service Department.
Tubing should be supported at minimum of 36" to prevent excessive load
to the connectors. Do not install tubing supports closer than 3 inches from
the connector ends. We strongly recommend that new installations be
thoroughly tested prior to use. Do not use with explosive gases, petroleum
products, or other fuels.
Body:Polysulfone
Collet:Nylon
O-Ring:EPDM
Spacer:Acetal
Tube Insert:
Polysulfone
Fitting Performance
Series 35
100psi @ 180ºF
6.8 bar @ 82ºC
250psi @ 75ºF
17.25 bar @ 24ºC
Thread Torque Values
Size
1⁄2"
3⁄4"
Min. Torque Values
17.7 in - lbs.
22.7 in - lbs.
Max. Torque Values
26.5 in - lbs.
31 in - lbs.
Approvals
FDA: Watts Series 35 fittings are produced from
FDA approved materials.
NSF/ANSI 61-G: Watts Series 35 products are tested,
certified, and approved for contact with drinking water.
NSF/ANSI 14: Watts Series 35 products are tested, certified,
and approved to NSF-14 standards.
ASTM F877: Watts Series 35 products are tested, certified,
and approved to ASTM F877 performance standards.
NSF-U.P. Code: Watts Series 35 products are tested,
certified, and approved and meet the requirements of the
Uniform Plumbing Code.
IAPMO ASSE 1061: Watts Series 35 fittings are tested,
certified and approved to ASSE 1061 for Quick-Connect
fittings and approved to Canadian Standard CSA B137.5.
Lead free product is certified to NSF/ANSI 372 and conforms with the
lead content requirements for lead free plumbing as defined by California,
Vermont, Maryland, and Louisana state laws and the U.S. Safe Drinking
Water Act.
*The wetted surface of this product contacted by consumable water
contains less than 0.25% of lead by weight.
4
Watts Quick-Connect Series 35 products are designed and manufactured
to be trouble free for many years of service life. Series 35 products are
designed and manufactured in polysulfone, a high performance thermal
plastic material. All Series 35 products are approved and certified to NSF61-G, NSF 14, CSA B137.5, ASTM F877, and to the Uniform Plumbing
Code (U.P. Code) and ASSE 1061. Series 35 products are available in
standard imperial inch sizes. The Watts Quick-Connect design allows for
quick and easy connections without installation tools. Simply cut the plastic,
copper or CPVC tubing and snap a Watts Quick-Connect fitting in place for
a zero leak connection. ! CAUTION
The polysulfone material used in the Quick-Connect fittings can be compromised by exposure to volatile organic compounds (VOC’s) and caustic
chemicals. Therefore, DO NOT expose this product to any such chemical or
foreign substance, which would include exposure to the following products:
Pipe Dopes (thread sealants), bug sprays, lubricants, cleaners, paints,
bleaches, acids, solder fluxes, plastic piping primers and cements, oxidizing
agents, alkaline solutions, thinners, fuels, oil based caulks, hydrocarbons,
spray foam of foaming agents (insulation).
Watts recommends that all fittings and parts be stored in their original
packaging until installation to protect the fitting internals from dirt and
debris that may cause damage to the o-ring and the o-ring guide.
It is also recommended that all threaded connections be made with Teflon®
tape only.
Failure to follow these instructions will void the warranty and possibly result
in leaks and water damage.
Technical Information - Series LF47
Material Specifications
Body:
Lead Free* Brass Alloy
O-Ring:EPDM
Gripper Ring:
Stainless Steel
Push Ring: Delrin
Tube Insert:
Polysulfone
Fitting Performance
Series LF47
200psi @ 200ºF (13.8 bar @ 93° C)
Approvals
ASTM F877: Watts Series LF47 Quick-Connect fittings are tested, certified and approved to ASTM F877 performance standards.
IAPMO ASSE 1061: Watts Series LF47 Quick-Connect fittings
are tested, certified and approved to ASSE 1061, and approved to
Canadian Standard CSA B137.5 and NSF/ANSI 61.
Lead free product is certified to NSF/ANSI 372 and conforms with the lead
content requirements for lead free plumbing as defined by California, Vermont,
Maryland, and Louisana state laws and the U.S. Safe Drinking Water Act.
*The wetted surface of this product contacted by consumable water
contains less than 0.25% of lead by weight.
Watts Quick-Connect fittings are designed for low pressure fluids. For other
applications please refer to our Technical Service Department. Tubing should
be supported at minimum of 36" to prevent excessive load to the connectors.
Do not install tubing supports closer than 3 inches from the connector ends.
We strongly recommend that new installations be thoroughly tested prior to
use. Do not use with explosive gases, petroleum products, or other fuels.
Watts Series LF47 Quick-Connect fittings are designed and manufactured to
be trouble free for many years of service. All Series LF47 fittings are tested,
approved and certified to NSF/ANSI 61, CSA B137.5, ASTM F877 and ASSE
1061. Series LF47 fittings are available in standard imperial inch sizes. The
unique design of Series LF47 fittings allows for quick and easy connections
without installation tools.
! CAUTION
The polysulfone material used in the Quick Connect fittings can be compromised by exposure to volatile organic compounds (VOC’s) and caustic chemicals. Therefore, DO NOT expose this product to any such chemical or foreign
substance, which would include exposure to the following products: Pipe
Dopes (thread sealants), bug sprays, lubricants, cleaners, paints, bleaches,
acids, solder fluxes, plastic piping primers and cements, oxidizing agents,
alkaline solutions, thinners, fuels, oil based caulks, hydrocarbons, spray foam
of foaming agents (insulation).
Watts recommends that all fittings and parts be stored in their original packaging until installation to protect the fitting internals from dirt and debris that may
cause damage to the o-ring and the o-ring guide.
It is also recommended that all threaded connections be made with Teflon®
tape only.
Failure to follow these instructions will void the warranty and possibly result in
leaks and water damage.
All Series LF47 Fittings come complete with a removable push ring clip to
prevent accidental release of the fitting prior to pressurization.
5
Features
Making A Connection with Series 10 and 35
1
Cut the pipe or tubing squarely using a sharp tubing
cutter (plastic) or rotary copper pipe cutter (copper).
Inspect the outside diameter of the pipe or tubing to
be sure there is no damage, nicks, burrs, or debris.
Deburr and clean pipe or tubing as necessary.
Connect to Multiple Materials
The Watts Quick-Connect fittings incorporates Stainless Steel Gripping
Teeth in its Collet. These corrosion resistant teeth allow Quick-Connect
fittings to interconnect with multiple materials without the need for special
tools, or tube inserts.
2
Measure the insertion depth on the pipe or tubing end.
The fittings have an insertion line molded into the body
of the fitting.
3
For PEX Pipe used with Series 35, gently insert a pipe
stiffener (provided for each connection with fitting) into
the pipe end.**
Make certain to push the tubing completely into the
fitting until it comes into contact with the internal
tube stop.
Rotates under pressure
4
Tube Stop
5
To disconnect, ensure system has been depressurized
before removing fitting. Push the collet in squarely
against the face of the fitting. With the collet held
securely in this position, the tubing can be removed.
• LDPE, MDPE, & HDPE PEX Tubings
• Copper
• CPVC
• Non-Oxygen Barrier PEX
• Potable Monowall PEX
After a joint is made the tubing can still swivel while connected, even
under maximum pressure. The ability to rotate under pressure makes these connectors ideal for vibrating and
dynamic applications.
O-Ring Guide
All Watts Quick-Connect fittings incorporate an exclusive O-ring Guide for
improved reliability. This unique feature insures zero-leak connections by:
• Protecting the O-ring from damage during connection
• Increasing the connectors’ side load capacity
• Correctly aligning the tubing with the O-ring every time.
• Preventing the O-ring from becoming dislodged.
Highest Flow
Watts Quick-Connect fittings join the tubing on the outside. Because there
is no barb fitting on the inside of the tubing the flow capacity is increased
by more than 30%. Only Quick-Connect fittings offer complete flow, allowing for a more efficient system.
Collet
Cap
O-Ring Guide
Create mini-manifolds
O-Ring
Body
Patented O-Ring Guide
Cone Seal
6
Watts Quick-Connect fittings
utilize a swivel nut with NPS
straight threads and a cone
seal. This allows the installer
to thread onto NPT, NPS, BSP,
and most threads without tools
or thread sealant. Simply thread
on, hand tight, for a zero leak
seal.
With Quick-Connect fittings small lengths of tubing can be eliminated by
using our stackable connector configurations. Simply snap
together Tees and/or Elbows to create a mini-manifold
of fittings. Because Quick-Connect fittings rotate
the direction of the tubing can be oriented
by a simple twist, reducing the
amount of tubing required to
plumb a water system.
**To comply with ASSE 1061, a tube stiffener (provided) must be used
on all PEX pipe connections Series 35.
Features
Making A Connection with Series LF47
1
2
Cut the pipe or tubing squarely using a sharp tubing
cutter (plastic) or rotary copper pipe cutter (copper).
Inspect the outside diameter of the pipe or tubing to
be sure there is no damage, nicks, burrs, or debris.
Deburr and clean pipe or tubing as necessary.
Connect to Multiple Materials
The Watts Quick-Connect fittings incorporates a Stainless Steel Gripper
Ring. These corrosion resistant teeth allow Quick-Connect fittings to
interconnect with multiple materials without the need for special tools,
or tube inserts.
Measure the insertion depth on the pipe or tubing
end. For Series LF47 fittings, use the Insertion Depth
Guide provided.
• LDPE, MDPE, & HDPE PEX Tubings
• Copper
• CPVC
• Non-Oxygen Barrier PEX
• Potable Manowall PEX
Insertion Depth Guide
Size
3/8" CTS
1/2" CTS
3/4" CTS
1" CTS
3
Insertion Depth
1"
25mm
1"
25mm
11/8"29mm
11/4" 32mm
For PEX Pipe, gently insert a pipe stiffener (provided
for each connection with fitting) into the pipe end.**
Rotates under pressure
4
Make certain to push the tubing completely into the
fitting until it comes into contact with the internal tube
stop. Insert push ring clip.
After a joint is made the tubing can still swivel while connected, even
under maximum pressure. The ability to rotate under pressure makes
these connectors ideal for vibrating and dynamic applications.
Tube Stop
5
To disconnect, ensure system has been depressurized
before removing fitting. Remove push ring clip. Push
ring does not require a disconnect tool. Push the
push ring in squarely against the face of the fitting.
With the push ring held securely in this position, the
tubing can be removed.
Slip Repair Fittings (For copper and CPVC only)
1. Remove 2" section of pipe. Ensure pipe is cut squarely and is free
of damage, nicks, burrs, or debris.
2. Measure the insertion depth of the pipe using the depth gauge mark
on one end of the fitting.
3. Push pipe and Slip End of fitting together.
4. Press the push ring of Slip End and slide the fitting onto the end of the pipe
with insertion depth until it reaches the internal tube stop.
Step 3. Push
to connect.
Slip End
Depth gauge mark
Highest Flow
Watts Quick-Connect fittings join the tubing on the outside. Because there
is no barb fitting on the inside of the tubing the flow capacity is increased
by more than 30%. Only Quick-Connect fittings offer complete flow,
allowing for a more efficient system.
Body
O-Ring
Lock Ring
Gripper Ring
Seat Ring
Push Ring
Step 4. Slide
to connect.
5. Insert push ring clips.
**To comply with ASSE 1061, a tube stiffener (provided) must be used
on all PEX pipe connections Series LF47.
7
Series 10
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
Series 10 Tees
1023
LEAD FREE*
Type 23 Union Tee
1023B-04
1023B-06
1023B-08
0666115
0666116
0666117
⁄ " OD
⁄ " OD
1⁄2" OD
098268426502
098268426519
098268426526
10
10
10
20
10
6
200
100
60
.15
.30
.45
$ 20.50
24.50
30.75
⁄ " OD x 3⁄8" OD x 1⁄4" OD
⁄ " OD x 1⁄2" OD x 3⁄8" OD
098268426533
098268426540
10
10
10
5
100
50
.30
.50
$ 26.00
34.25
⁄ " OD
⁄ " OD
1⁄2" OD
098268426557
098268426564
098268426571
10
10
10
30
10
10
300
100
100
.10
.20
.30
$ 16.00
24.25
39.50
⁄ " OD x 1⁄4" OD
098268426816
10
20
200
.10
$ 27.00
⁄ " OD
⁄ " OD
1⁄2" OD
098268426779
098268426786
098268426793
10
10
10
25
10
8
250
100
80
.15
.25
.40
$ 19.50
24.25
29.75
⁄ " OD x 1⁄8" NPT
⁄ " OD x 1⁄4" NPT
1⁄4" OD x 3⁄8" NPT
3⁄8" OD x 1⁄4" NPT
3⁄8" OD x 3⁄8" NPT
1⁄2" OD x 3⁄8" NPT
1⁄2" OD x 1⁄2" NPT
098268426700
098268426717
098268426724
098268426731
098268426748
098268426755
098268426762
10
10
10
10
10
10
10
30
30
20
10
20
10
10
300
300
200
100
200
100
100
.10
.05
.20
.15
.15
.25
.15
$ 14.50
16.25
19.25
21.50
22.25
28.00
28.75
14
38
LEAD
FREE *
Type 24R Reducing Tee
1024RB-060604
1024RB-080806
0666118
0666119
38
12
1024R
Series 10 Elbows
1017
LEAD FREE*
Type 17 Union Elbow
1017B-04
1017B-06
1017B-08
0666120
0666121
0666122
14
38
Type 17R Reducing Union Elbow
LEAD
FREE *
1017RB-0604
0666146
38
1017R
LEAD FREE*
Type 18 Stackable Elbow
1018B-04
1018B-06
1018B-08
0666142
0666143
0666144
14
38
1018
LEAD FREE*
Type 19 Male Elbow
1019
1019B-0402
1019B-0404
1019B-0406
1019B-0604
1019B-0606
1019B-0806
1019B-0808
0666135
0666136
0666137
0666138
0666139
0666140
0666141
14
14
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
8
Series 10
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
Series 10 Connectors
1015
LEAD FREE*
Type 15 Union Connector
1015B-04
1015B-06
1015B-08
0666110
0666111
0666112
⁄ " OD
⁄ " OD
1⁄2" OD
098268426458
098268426465
098268426472
10
10
10
30
10
10
300
100
100
.10
.20
.30
$ 14.25
19.00
22.25
⁄ " OD x 1⁄4" OD
⁄ " OD x 3⁄8" OD
098268426489
098268426496
10
10
20
8
200
80
.15
.35
$ 19.25
26.00
⁄ " OD x 7⁄16" UNS
⁄ " OD x 7⁄16" UNS
1⁄4" OD x 1⁄4" NPT
3⁄8" OD x 1⁄4" NPT
098268426823
098268426830
098268426588
098268426595
10
10
10
10
20
20
20
20
200
200
200
200
.20
.18
.15
.15
$ 21.00
21.75
32.00
33.25
⁄ " OD x 1⁄8" NPT
⁄ " OD x 1⁄4" NPT
1⁄4" OD x 3⁄8" NPT
1⁄4" OD x 1⁄2" NPT
3⁄8" OD x 1⁄8" NPT
3⁄8" OD x 1⁄4" NPT
3⁄8" OD x 3⁄8" NPT
3⁄8" OD x 1⁄2" NPT
1⁄2" OD x 3⁄8" NPT
1⁄2" OD x 1⁄2" NPT
098268426601
098268426618
098268426625
098268426632
098268426649
098268426656
098268426663
098268426670
098268426687
098268426694
10
10
10
10
10
10
10
10
10
10
30
30
30
25
25
20
20
20
15
15
300
300
300
250
250
200
200
200
150
150
.05
.10
.10
.15
.15
.15
.15
.15
.20
.15
$ 9.50
10.75
14.50
18.50
18.50
15.75
18.00
28.25
24.25
26.00
14
38
LEAD
FREE *
Type 15R Reducing Union
1015RB-0604
1015RB-0806
0666113
0666114
38
12
1015R
LEAD FREE*
Type 10 Female Connector
1010
1010B-0401
1010B-0601
1010B-0404
1010B-0604
0666147
0666148
0666123
0666124
14
38
1001
LEAD FREE *
Type 01 Male Connector
1001B-0402
1001B-0404
1001B-0406
1001B-0408
1001B-0602
1001B-0604
1001B-0606
1001B-0608
1001B-0806
1001B-0808
0666125
0666126
0666127
0666128
0666129
0666130
0666131
0666132
0666133
0666134
14
14
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
9
Series 10
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
Series 10 Stems
Type 14R Reducing Stem
1014R
LEAD
FREE *
1014RB-0604
0666145
⁄ " OD x 1⁄4" OD
098268426809
10
30
300
.05
$ 15.75
⁄ " OD x 1/8 NPT
⁄ " OD x 1⁄4" NPT
3⁄8" OD x 1⁄4" NPT
3⁄8" OD x 3⁄8" NPT
1⁄2" OD x 3⁄8" NPT
098268426397
098268426403
098268426410
098268426427
098268426434
10
10
10
10
10
30
30
10
10
10
300
300
100
100
100
.10
.10
.20
.20
.20
$ 12.75
12.00
13.50
13.00
14.75
⁄ " OD
098268426441
10
50
500
.05
$ 22.00
⁄ " OD
⁄ " OD
098268426373
098268426380
10
10
8
6
80
60
.45
.55
$ 45.50
48.25
⁄ " OD x 1⁄4" NPT
⁄ " OD x3⁄8" NPT
098268426359
098268426366
10
10
8
6
80
60
.45
.55
$ 45.50
48.25
098268426847
098268427134
10
10
8
6
80
60
.45
.50
$ 50.00
52.00
38
1027
LEAD FREE *
Type 27 Male Stem
1027B-0402
1027B-0404
1027B-0604
1027B-0606
1027B-0806
0666104
0666105
0666106
0666107
0666108
14
14
Series 10 Stops
Type 45 End Stop
LEAD
FREE *
1045B-04
0666109
14
1045
Series 10 Valves
1039
LEAD
FREE*
Type 39 Union Stop Valve
1039B-04
1039B-06
0666102
0666103
14
38
LEAD
FREE*
Type 62 Male Stop Valve
1062B-04
1062B-06
0666100
0666101
14
38
1062
LEAD
FREE*
Type 53 Female Angle Valve
1053B-0404
1053B-0604
0666149
0666150
⁄ " OD x 1⁄4" NPT
⁄ " OD x 1⁄4" NPT
14
38
1053
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
10
Series LF47
Tees(description)
Section
Heading
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
⁄ " x 1⁄2" x 1⁄2" CTS
⁄ " x 3⁄4" x 3⁄4" CTS
1" x 1" x 1" CTS
098268022315
098268022322
098268022339
1
1
1
12
12
6
120
120
60
0.23
0.40
0.66
$ 11.00
12.75
20.50
098268022346
098268022360
098268022377
1
1
1
12
12
6
120
120
60
0.34
0.36
0.57
$ 12.25
12.50
22.75
098268022391
1
6
60
0.35
$ 11.50
098268022568
098268022582
098268022612
1
1
1
6
6
6
60
60
60
0.32
0.40
0.44
$ 14.50
17.25
23.50
Type 23 Union Tees
LEAD FREE*
Package Type: Poly Bag
LF4723-10
LF4723-14
LF4723-18
0472035
0472036
0472037
12
34
LF4723
Type 24R Reducing Tees
LEAD FREE*
Package Type: Poly Bag
LF4724R-141410
LF4724R-141014
LF4724R-181418
0472038
0472040
0472041
⁄ " x 3⁄4" x 1⁄2" CTS
⁄ " x 1⁄2" x 3⁄4" CTS
1" x 3⁄4" x 1" CTS
34
34
LF4724R
Type 26R Double Reducing Tees
Package Type: Poly Bag
LEAD
FREE *
LF4726R-141010
0472042
⁄ " x 1⁄2" x 1⁄2" CTS
34
Type 32 Slip Repair Tees
LF4726R
LEAD FREE*
Package Type: Poly Bag
LF4732-10
LF4732-14
LF4732-18
0472050
0472051
0472052
⁄ " CTS
⁄ " CTS
1" CTS
12
34
LF4732
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
11
Series LF47 Elbows
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
098268022056
098268022070
098268022087
1
1
1
12
12
6
098268022094
098268022100
1
1
⁄ " CTS
⁄ " CTS
1" CTS
098268022117
098268022124
098268022131
⁄ " CTS x 1⁄2" NPT
⁄ " CTS x 3⁄4" NPT
Mstr
Ctn
Unit Weight
(lbs)
List Price
120
120
60
0.17
0.30
0.48
$ 8.00
9.75
17.00
12
6
120
60
0.21
0.40
$ 9.50
16.50
1
1
1
6
6
6
60
60
60
0.17
0.30
0.48
$ 7.75
10.75
16.25
098268022155
098268022162
1
1
6
6
60
60
0.20
0.30
$ 8.50
12.75
098268022193
098268022209
1
1
6
6
60
60
0.20
0.30
$ 8.50
14.00
Type 17 Union Elbows
LEAD FREE*
Package Type: Poly Bag
LF4717
LF4717-10
LF4717-14
LF4717-18
0472016
0472017
0472018
⁄ " CTS
⁄ " CTS
1" CTS
12
34
Type 17R Reducing Union Elbows
LEAD
FREE *
Package Type: Poly Bag
LF4717R-1410
LF4717R-1814
0472019
0472020
⁄ " x 1⁄2" CTS
1" x 3⁄4" CTS
34
Type 18 Stackable Elbows
LF4717R
LEAD FREE*
Package Type: Poly Bag
LF4718-10
LF4718-14
LF4718-18
0472021
0472022
0472023
12
34
LF4718
Type 19 Male Elbows
LEAD
FREE *
Package Type: Poly Bag
LF4719
LF4719-1008
LF4719-1412
0472025
0472026
12
34
Type 20 Female Elbows
LEAD
FREE *
Package Type: Poly Bag
LF4720-1008
LF4720-1412
0472028
0472029
⁄ " CTS x 1⁄2" NPT
⁄ " CTS x 3⁄4" NPT
12
34
Type 21 Drop Ear Elbows
LF4720
Package Type: Poly Bag
LEAD
FREE *
LF4721-1008
0472034
⁄ " CTS x 1⁄2" FPT
12
098268022308
1
6
60
0.23
$ 7.25
LF4721
LEAD FREE*
Type 22 Union Elbow 45°
Package Type: Poly Bag
LF4722-10
0472031
LF4722-14
0472032
LF4722-18
0472033
⁄ " CTS 45º
⁄ " CTS 45º
1" CTS 45º
12
34
098268022261
098268022278
098268022292
1
1
1
6
6
6
60
60
60
0.17
0.30
0.48
$ 8.00
11.00
16.25
LF4722
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
12
Series LF47
Connectors
Section
Heading
(description)
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
LEAD FREE*
Type 01 Male Connectors
Package Type: Poly Bag
1⁄2" CTS x 1⁄2" NPT
LF4701-1008
0472011
1⁄2" CTS x 3⁄4" NPT
LF4701-1012
0472012
3⁄4" CTS x 3⁄4" NPT
LF4701-1412
0472013
LF4701-1816
0472015
1" CTS x 1" NPT
098268021981
098268022001
098268022018
098268022032
1
1
1
1
12
6
12
6
120
60
120
60
0.13
0.18
0.20
0.28
$ 5.75
8.00
7.00
12.50
Package Type: Poly Bag
1⁄2" CTS x 1⁄2" FPT
LF4710-1008
0472005
1⁄2" CTS x 3⁄4" NPT
LF4710-1012
0472006
3⁄4" CTS x 3⁄4" FPT
LF4710-1412
0472007
3⁄4" CTS x 1" NPT
LF4710-1416
0472008
098268021905
098268021912
098268021929
098268021936
1
1
1
1
12
6
6
6
120
60
60
60
0.14
0.20
0.21
0.22
$ 5.75
8.00
7.00
8.00
LF4710-1816
098268021974
1
6
60
0.30
12.50
098268021806
098268021837
098268021851
1
1
1
12
12
6
120
120
60
0.14
0.23
0.33
$ 8.00
8.75
16.50
1
1
12
6
120
60
0.20
0.30
$ 8.50
20.25
1
1
1
12
6
6
120
60
60
0.25
0.39
0.55
$ 12.25
15.25
21.50
LF4701
LEAD FREE*
Type 10 Female Connectors
0472010
1" CTS x 1" FPT
LF4710
LEAD FREE*
Type 15 Union Connectors
Package Type: Poly Bag
LF4715-10
0472000
LF4715-14
0472001
LF4715-18
0472002
⁄ " CTS
⁄ " CTS
1" CTS
12
34
LF4715
LEAD
FREE *
Type 15R Reducing Union Connectors
Package Type: Poly Bag
3⁄4" CTS x 1⁄2" CTS
LF4715R-1410
0472003
LF4715R-1814
0472004
1" CTS x 3⁄4" CTS
098268021868
098268021875
Type 16 Slip Repair Union Connectors
LEAD FREE*
LF4715R
Package Type: Poly Bag
LF4716-10
0472047
LF4716-14
0472048
LF4716-18
0472049
⁄ " CTS
⁄ " CTS
1" CTS
12
34
098268022506
098268022520
098268022537
LF4716
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
13
Series LF47 Ends
LEAD FREE*
Type 45 End Stops
Package Type: Poly Bag
LF4745-10
0472044
LF4745-14
0472045
LF4745-18
0472046
⁄ " CTS
⁄ " CTS
1" CTS
12
34
098268340679
098268340686
098268340693
1
1
1
12
6
6
120
60
60
0.09
0.14
0.21
$ 6.50
8.25
16.50
098268022667
098268022674
098268022681
1
1
1
6
6
6
60
60
60
0.44
0.63
1.17
$ 13.50
18.75
32.50
LF4745
Series LF47 Ball Valves
LF47FBVQC
LEAD FREE*
Type FBV Ball Valves
Package Type: Poly Bag
LF47FBVQC-10
0472053
LF47FBVQC-14
0472054
LF47FBVQC-18
0472055
⁄ " CTS
⁄ " CTS
1" CTS
12
34
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
14
Series 35 Tees
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
⁄ " x 3⁄8" x 3⁄8" CTS
⁄ " x 1⁄2" x 1⁄2" CTS
3⁄4" x 3⁄4" x 3⁄4" CTS
1 x 1" x 1" CTS
098268303315
098268303322
098268303339
098268353174
1
1
1
1
24
24
8
8
098268303742
1
098268303759
098268353181
Mstr
Ctn
Unit Weight
(lbs)
List Price
120
120
40
40
0.08
0.10
0.15
0.27
$ 6.25
6.50
11.00
13.50
24
120
0.12
$ 14.50
1
1
8
8
40
40
0.15
0.31
9.75
11.50
098268320800
1
14
140
0.16
$ 9.00
098268303698
1
24
120
0.09
$ 5.50
Type 23 Union Tees
3523
LEAD FREE *
Package Type: Poly Bag
3523B-08
3523B-10
3523B-14
3523B-18
0650007
0650008
0650009
0651176
38
12
Type 24R Reducing Tees
3524R
LEAD FREE *
Package Type: Poly Bag
3524RB-101004
0650033
3524RB-141410
3524RB-181814
0650034
0651177
⁄ " CTS x 1⁄2" CTS
x 1⁄4" OD
3⁄4" x 3⁄4" x 1⁄2" CTS
1" x 1" x 3⁄4" CTS
12
Type 26 Double Reducing Tees
LEAD
FREE *
Package Type: Poly Bag
3⁄4" x 1⁄2" x 1⁄2" CTS
3526B-141010
0650949
3526
Type 30 Male Thread Tees
LEAD
FREE *
Package Type: Poly Bag
1⁄2" x 1⁄2" x 1⁄2" NPT
3530B-1008
0650028
3530
Tee Sizing
Dim. 1
Dim. 2
Example: 3524RB-141410 = Dim.1 (3⁄4") Dim. 2 (3⁄4") Dim. 3 (1⁄2")
Dim. 3
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
15
Series 35 Tees
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
098268303452
1
16
80
0.12
5.75
098268303636
1
24
120
0.08
$ 6.75
Type 33 Stackable Tees
Package Type: Poly Bag
LEAD
FREE *
3533B-10
0650019
⁄ " x 1⁄2" x 1⁄2" CTS
12
3533
Type 34 Stackable Branch Tees
Package Type: Poly Bag
LEAD
FREE *
3534B-10
0650024
⁄ " x 1⁄2" x 1⁄2" CTS
12
3534
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
16
Series 35 Elbows
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
098268304633
098268304640
098268304657
098268320824
1
1
1
1
24
24
16
10
120
120
80
100
0.05
0.09
0.12
0.15
$ 6.25
7.00
11.00
12.50
098268304787
098268304800
098268304817
098268353150
1
1
1
1
24
24
16
16
120
120
80
80
0.05
0.08
0.15
0.15
$ 4.00
4.50
6.00
7.75
098268304879
1
8
40
0.18
$ 6.50
098268306248
098268306255
098268353167
1
1
1
24
24
16
120
120
80
0.07
0.07
0.15
$ 5.25
4.50
7.75
098268305920
098268305944
098268305951
1
1
1
24
24
24
120
120
120
0.07
0.08
0.12
$ 5.50
6.00
7.50
LEAD FREE *
Type 17 Union Elbows
3517
Package Type: Poly Bag
3517B-08
0650046
3517B-10
0650047
3517B-14
0650048
3517B-18
0650951
⁄ " CTS
⁄ " CTS
3⁄4" CTS
1" CTS
38
12
LEAD FREE *
Type 18 Stackable Elbows
3518
Package Type: Poly Bag
3518B-08
0650058
3518B-10
0650059
3518B-14
0650060
3518B-18
0651174
⁄ " CTS
⁄ " CTS
3⁄4" CTS
1" CTS
38
12
Type 21 Drop Ear Elbows
Package Type: Poly Bag
LEAD
FREE *
3521B-1008
0650065
⁄ " CTS x 1⁄2" NPT
12
3521
Type 19 Male Elbows
3519
LEAD FREE*
Package Type: Poly Bag
3519B-1006
3519B-1008
3519B-1816
0650160
0650161
0651175
⁄ "CTS x 3⁄8" NPT
⁄ " CTS x 1⁄2" NPT
1" CTS x 1" NPT
12
12
Type 20 Female Swivel Elbows
LEAD
FREE *
Package Type: Poly Bag
3520B-0808
3520B-1008
3520B-1012
0650130
0650132
0650133
⁄ " CTS x 1⁄2" NPS
⁄ " CTS x 1⁄2" NPS
1⁄2" CTS x 3⁄4" NPS
38
12
3520
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
17
Series 35 Connectors
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
Package Type: Poly Bag
3⁄8" CTS x 3⁄8" NPT
3501B-0806
0650952
098268320831
1
15
150
0.04
$ 3.50
⁄ " CTS x ⁄ " NPT
098268320848
1
15
150
0.02
4.00
⁄ " CTS x 1⁄2" NPT
098268306392
1
24
120
0.05
4.00
⁄ " CTS x ⁄ " NPT
098268306408
1
24
120
0.07
4.25
⁄ " CTS x 3⁄4" NPT
098268306415
1
24
120
0.08
5.00
⁄ " CTS x ⁄ " NPT
098268306439
1
24
120
0.10
5.75
1" CTS x 1" NPT
098268334890
1
24
120
0.18
6.00
⁄ " CTS x 1⁄2" NPS
098268305647
1
24
120
0.05
$ 5.25
⁄ " CTS x ⁄ " NPS
098268305654
1
24
120
0.09
5.00
⁄ " CTS x 3⁄4" NPS
098268305661
1
24
120
0.10
7.50
3501
LEAD FREE *
Type 01 Male Connectors
3501B-1006
0650953
12
3501B-0808
0650174
38
3501B-1008
0650175
12
3501B-1012
0650176
12
3501B-1412
0650178
34
3501B-1816
0650983
38
12
34
Type 10 Female Connectors
3510
LEAD FREE *
Package Type: Poly Bag
3510B-0808
0650103
38
3510B-1008
0650104
12
3510B-1012
0650105
12
12
⁄ " CTS x ⁄ " Closet
098268305678
1
24
120
0.06
5.25
⁄ " CTS x 3⁄4" FGHT
098268305685
1
24
120
0.05
9.25
⁄ " CTS x ⁄ " NPS
098268305692
1
24
120
0.10
9.00
1" CTS x 1" NPS
098268353112
1
24
120
0.13
7.50
3510B-1013
0650106
12
3510B-1014
0650107
12
3510B-1412
0650108
3510B-1816
0651170
34
34
34
Type 13 Hose Barb Fittings
Package Type: Poly Bag
LEAD
FREE *
0650954
⁄ " CTS x 3⁄4" Barb
34
098268320855
1
28
280
0.07
6.75
098268306156
098268306163
098268309867
098268309850
1
1
1
1
24
24
24
24
120
120
120
120
0.06
0.07
0.07
0.10
$ 3.50
4.25
6.75
7.75
098268304992
098268305005
098268305012
098268320817
1
1
1
1
24
24
24
10
120
120
120
100
0.05
0.09
0.15
0.15
$ 5.25
5.75
7.50
12.25
Type 14 Reducing Stems
3513
Package Type: Poly Bag
LEAD FREE *
3514
3513B-1412
3514B-1008
3514B-1410
3514B-1810
3514B-1814
0650151
0650152
0650768
0650767
⁄ " CTS x 3⁄8" CTS
⁄ " CTS x 1⁄2" CTS
1" CTS x 1⁄2" CTS
1" CTS x 3⁄4" CTS
12
34
Type 15 Union Connectors
3515
LEAD FREE *
Package Type: Poly Bag
3515B-08
3515B-10
3515B-14
3515B-18
0650073
0650074
0650075
0650950
⁄ " CTS
⁄ " CTS
3⁄4" CTS
1" CTS
38
12
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
18
Series 35 Connectors
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
Type 15R Reducing Union Connectors
3515R
LEAD FREE*
Package Type: Poly Bag
3515RB-1004
3515RB-1008
3515RB-1410
3515RB-1814
0650084
0650085
0650725
0651173
⁄ " CTS x 1⁄4" OD
⁄ " CTS x 3⁄8" CTS
3⁄4" CTS x 1⁄2" CTS
1" CTS x 3⁄4" CTS
098268305104
098268305111
098268309355
098268353143
1
1
1
1
24
24
24
24
120
120
120
120
0.08
0.07
0.10
0.14­­­
$ 11.00
5.50
6.75
7.50
⁄ " CTS x 1⁄2" NPT
098268424621
1
24
120
0.08
$ 2.00
⁄ " CTS x 1⁄2" NPS
098268424638
1
10
100
0.08
$ 2.25
⁄ " CTS
⁄ " CTS
3⁄4" CTS
1" CTS
098268307351
098268307368
098268309089
098268309898
1
1
1
1
24
24
24
24
120
120
120
120
0.04
0.05
0.06
0.08
$ 3.75
3.75
5.25
7.75
12
12
Type 27 Male Stem
Package Type: Poly Bag
3527
LEAD
FREE *
3527B-1008
0650791
12
Type 28 Female Stem
Package Type: Poly Bag
3528
LEAD
FREE *
3528B-1008
0650792
12
Series 35 Ends
Type 45 End Stops
3545
LEAD FREE*
Package Type: Poly Bag
3545B-08
3545B-10
3545B-14
3545B-18
0650235
0650236
0650709
0650771
38
12
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
19
Series 35 Valves
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
098268307580
098268307597
098268310177
098268063462
1
1
1
1
24
16
16
8
098268307924
1
098268308174
098268308105
Mstr
Ctn
Unit Weight
(lbs)
List Price
120
80
80
40
0.09
0.16
0.20
0.25
$ 9.75
10.50
13.25
17.25
16
80
0.14
$ 17.50
1
24
120
0.09
$ 6.00
1
8
40
0.24
$ 24.75
Type 39 Stop Valves
3539
LEAD FREE*
Package Type: Poly Bag
3539B-08
3539B-10
3539B-14
3539B-18
0650245
0650246
0650789
0650964
⁄ " CTS
⁄ " CTS
3⁄4" CTS
1" CTS
38
12
Type 39R Reducing Stop Valve
Package Type: Poly Bag
LEAD
FREE *
3539RB-1004
0650251
⁄ " CTS x 1⁄4" OD
12
3539R
Type 40 Union Check Valve
Package Type: Poly Bag
LEAD
FREE *
3540B-10
0650271
⁄ " CTS
12
3540
Type 41 3-Way Bypass Valve
Package Type: Poly Bag
LEAD
FREE *
3541B-10
0650264
⁄ " CTS
12
3541
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
20
Series 35 Valves - cont.
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
Type 43 Stackable Valve
Package Type: Poly Bag
3543
LEAD
FREE *
3543B-10
0650255
⁄ " CTS
098268307962
1
16
80
0.14
$ 8.00
⁄ " CTS x 1⁄4" OD
098268357905
1
12
60
0.12
15.50
098268433555
098268433562
1
1
16
16
80
80
0.08
0.08
$ 6.75
7.00
098268433579
1
16
80
0.08
$ 7.50
098268433593
1
16
80
0.11
$ 9.25
098268433517
098268433524
1
1
16
16
80
80
0.08
0.08
$ 8.75
8.25
098268433548
1
16
80
0.08
8.00
12
Type 50 Tee Valves
Package Type: Poly Bag
LEAD
FREE *
3550B-1004
0651188
12
3550
Type 52 Female In-Line Valves
LEAD
FREE *
Package Type: Poly Bag
3552B-0806
3552B-0808
0651204
0651205
⁄ " NPS x 1⁄4" CTS
⁄ " NPS x 3⁄8" CTS
12
12
3552
Type 53 Female Angle Valves
Package Type: Poly Bag
LEAD
FREE *
3553
3553B-0608
0651206
⁄ " NPS x 1⁄4" CTS
12
Type 54 Female Angle Valve
Package Type: Poly Bag
LEAD
FREE *
3554
3554B-1408
0651208
⁄ " NPS x 3⁄4" MGHT
12
Type 55 In-Line Valves
LEAD
FREE *
Package Type: Poly Bag
3555B-1006
3555B-1008
0651200
0651201
⁄ " CTS x 1⁄4" CTS
⁄ " CTS x 3⁄8" CTS
12
12
3555
Type 56 Angle Valves
Package Type: Poly Bag
LEAD
FREE *
3556B-1008
0651203
⁄ " CTS x 3⁄8" CTS
12
3556
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
21
Series 35 Valves - cont.
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
⁄ " CTS x 3⁄4" MGHT
098268433616
1
16
80
0.08
$ 7.50
098268806199
1
8
40
0.16
12.00
098268806229
1
8
40
0.16
12.00
098268308631
098268308648
098268309904
3
3
3
24
24
24
120
120
120
0.04
0.04
0.05
1.75
1.75
1.75
⁄ " CTS
098268309270
1
24
120
0.01
1.50
⁄ " NPS
⁄ " NPS/FGHT
098268309331
098268309348
1
1
24
24
120
120
0.01
0.01
$ 1.25
2.00
Type 58 Angle Valve
Package Type: Poly Bag
LEAD
FREE *
3558B-1014
0651210
12
3558
Type 61 Adapter Stop Valves
LEAD FREE*
Package Type: Poly Bag
LF3561B-0604
0651278
LF3561B-0606
0651279
⁄ " OD x 3⁄8" Male Comp
x 3⁄8" Female Comp
3⁄8" OD x 3⁄8" Male Comp
x 3⁄8" Female Comp
14
LF3561
Series 35 Miscellaneous
Type 47 Collet Clips
3547
LEAD FREE*
Package Type: Poly Bag
3547B-10
3547B-14
3547B-18
0650292
0650293
0650772
⁄ " CTS
⁄ " CTS
1" CTS
12
34
Type 159 O-Ring Assembly
Package Type: Poly Bag
LEAD
FREE *
159B-10
0650718
12
Type 161 Cone Seals
159
LEAD
FREE *
Package Type: Poly Bag
161B-08
161B-12
0650723
0650724
12
34
161
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
22
Series 35 Miscellaneous - cont.
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
⁄ " CTS
⁄ " CTS
1" CTS
098268340716
098268340723
098268340730
1
1
1
24
24
24
120
120
120
0.01
0.01
0.01
0.99
1.25
1.25
1
6
60
0.20
$ 22.00
1
5
50
0.20
$ 18.50
1
5
50
0.20
$ 18.50
1
24
120
0.07
$ 9.25
1
3
30
0.43
$ 38.25
1
2
20
0.40
$ 32.50
Type 162 Pipe Inserts
LEAD
FREE *
Package Type: Poly Bag
162-10
162-14
162-18
0651160
0651161
0651162
12
34
162
Series 35 Manifolds - Single
Type 89 Manifolds - Single Union Body
Package Type: Poly Bag
3589
LEAD
FREE *
3589B-1810
0650764
1" CTS x 1⁄2" CTS
098268309829
Type 90 Manifolds - Single Stem Body - Right
Package Type: Poly Bag
3590
LEAD
FREE *
3590B-1810
0650765
1" CTS x 1⁄2" CTS
098268309836
Type 91 Manifolds - Single Stem Body - Left
Package Type: Poly Bag
3591
LEAD
FREE *
3591B-1810
0650766
1" CTS x 1⁄2" CTS
098268309843
Type 81 - Manifold Single Side Mounting Kits
Package Type: Poly Bag
LEAD
FREE *
3581B-18
0650769
For 35 Series
098268309874
3581
Series 35 Manifolds - Dual
Type 83 Manifolds - Dual Union Body
Package Type: Poly Bag
3583
LEAD
FREE *
3583B-1810
0650757
1" CTS x 1⁄2" CTS
098268309751
Type 84 Manifolds - Dual Stem Body
Package Type: Poly Bag
LEAD
FREE *
3584B-1810
0650758
1" CTS x 1⁄2" CTS
098268309768
3584
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
23
Series 35 Manifolds - Dual - cont.
Model
Ordering
Code
Size &
Connection
UPC
Ind.
Bag
Inner
Ctn
Mstr
Ctn
Unit Weight
(lbs)
List Price
1
24
120
0.09
$ 10.25
098268309775
1
24
120
0.02
$ 4.25
098268309782
1
12
120
0.15
$ 14.00
098268309799
1
24
120
0.01
$ 1.75
098268309805
1
24
120
0.01
$ 1.75
098268309812
1
24
120
0.07
$ 4.50
098268326703
1
10
50
0.21
$ 7.00
1" CTS x 1⁄2" CTS
1" CTS x 3⁄4" CTS
098268309867
098268309850
1
1
24
24
120
120
0.05
0.07
$ 6.75
7.75
1" CTS
098268310009
1
24
120
0.04
$ 5.25
Type 80 Manifold Dual Side Mounting Kits
Package Type: Poly Bag
LEAD
FREE *
3580B-18
0650770
For 35 Series
098268309881
3580
Series 35 Manifold Accessories
Type 82 Manifold Divider Plugs
Package Type: Poly Bag
LEAD
FREE *
3582B-18
0650759
For 35 Series
3582
Type 85 Manifold Return Ends
Package Type: Poly Bag
LEAD
FREE *
3585B-18
0650760
1" CTS
3585
Type 86 Manifold Label Plates
Package Type: Poly Bag
LEAD
FREE *
Red
3586B-18
0650761
Red - For 35 and Metric
3586
Type 87 Manifold Label Plates
Package Type: Poly Bag
LEAD
FREE *
Blue
3587B-18
0650762
Blue - For 35 and Metric
3587
Type 88 Manifold Valve Repair Kits
Package Type: Poly Bag
LEAD
FREE *
3588B-10
0650763
⁄ " Spool
12
3588
Type 80-MT Manifold Tool
Package Type: Poly Bag
LEAD
FREE *
3580-MT
0650975
Easy Removal of Outlets
3580-MT
Type 14 Reducing Stems
LEAD
FREE *
Package Type: Poly Bag
3514B-1810
3514B-1814
0650768
0650767
3514
Type 46 End Plugs
Package Type: Poly Bag
LEAD
FREE *
3546
24
3546B-18
0650773
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
Installation Dimensions
35 Series Quick-Connect Manifold
81⁄4"
1" CTS Watts Quick-Connect Inlets.
13⁄4"
⁄ " CTS
Quick-Connect Outlets
12
Color Coded Label Plates
(RED = HOT, BLUE = COLD)
21⁄4"
Recommended Mounting
Screw #10 Panhead (4) Places
Dimension A
Ports
45⁄8"
4
6
8
10
12
14
16
18
20
22
24
26
28
30
30+
Dimension
A
4"
61⁄4"
81⁄2"
103⁄4"
13"
151⁄4"
171⁄2"
193⁄4"
22"
241⁄4"
261⁄2"
283⁄4"
31"
331⁄4"
Add 21⁄4" for Each (2) Additional Port
1⁄4 Turn On/Off Valve
With Integral Handle
23⁄8"
11⁄4"
25
Assembly Elements
35 Series Quick-Connect Manifold
Features
• Integral High-Flow Shutoff Valves
• Serviceable Shutoff Valves
• Eliminates Fittings
• Single and Dual Sections can be connected together
• Modular design allows for flexibility
• Field Configurable
• Increase water flow
• Available in single or dual outlet configurations
Dual Side Style
Label Plates
Dual Union Body
Divider Plug
Dual Stem Body
Dual Manifold
(Assembled)
26
Return End
Dual Side
Mounting Kit
Assembly Elements
Single Side Style
Single Stem Body
Label Plates
Single Side
Mounting Kit
Single Union Body
Divider Plug
Single Manifold
(Assembled)
27
Manifold
Labels Styles
Configuration
35 Series Quick-Connect Manifold
Watts Manifolds operate much like an electrical breaker box. The main water supply lines bring water into the manifold and individual distribution lines move
water out to each fixture. All outlets have a built in valve which allows you the ability to stop the water flow to any single fixture without shutting down the
entire water system.
The new Watts Manifold System utilizes an exclusive modular design. Manifold Sections can be purchased individually and simply snapped together to create
the ideal configuration for each application.
Features
Performance ratings
100psi@180°F
6.8 bar @ 82°C
250psi@75°F
17.25 bar @ 24°C
• Complies with NSF and FDA standards
• All Inlets are 1" CTS, use a Reducing Stem to create other inlet sizes
Single Examples
1 Quick-Connect Inlet
Single Temperature Use
(Hot or Cold)
28
2 Quick-Connect Inlets
Single Temperature Use
(Hot or Cold)
2 Quick-Connect Inlets
Dual Temperature Use
(Hot & Cold)
Configuration Styles
Dual Examples
2 Quick-Connect Inlets
1 Quick-Connect Inlet
2 Quick-Connect Inlets
1 Quick-Connect Outlet
2 Quick-Connect Inlets
29
NOTES
30
NOTES
31
NOTES
32
33
For Technical and Ordering Assistance, please call us at 978-688-1811.
To locate your nearest Watts representative, please click on our
find a sales rep locator on watts.com.
Represented by:
A Watts Water Technologies Company
PL-Quick-Connect 1610
USA: Tel: (978) 689-6066 • Fax: (978) 975-8350 • Watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • Watts.ca
Latin America: Tel: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • Watts.com
MF10135
© 2016 Watts