Inspection Check Sheet
70- Point Quality Assurance
This Inspection Check Sheet must be:
1) completed with all items checked
2) signed by responsible YourMechanic technician as indicated
3) retained along with repair orders and Vehicle History Report in the vehicle’s service history file
Dealership Name:
City:
Year/Make/Model:
State:
Ext. Color:
Int. Color:
Date Inspected:
VIN:
Order Number:
Mileage:
Visual Inspection
Mechanical Inspection
Engine
1 Cold engine operation performs properly
2 Vehicle operates properly during warm-up conditions
3 Engine performs properly during operating temperature
4 Engine reaches normal operating temperature
5 Engine fan(s) operate properly
6 No abnormal noise or vibration from engine
7 Exhaust system is properly secured with no leaks
8 Engine mounts operate properly with no signs of wear
9 Inspect engine for fuel, oil, coolant or other fluid leaks.
10 Engine coolant level within specification
11 Perform cooling system pressure test
12 Check for evidence of oil sludge
13 Check Fluids: Oil, brake, transmission, and power steering at proper levels
Transmission
14 Transmission/clutch operates smoothly and shifts into all gears
15 Automatic transmission operates properly
Pass
Fail
N/A
Frame & Unibody
30 Confirm under-hood VIN/ factory labels and decals
31 Frame/Unibody condition
32 Panel alignment and fit
33 Lower body and underbody condition
Exterior Condition
34 No cracked or broken lenses of exterior lights
35 Glass free of cracks, stars and large chips
36 Body is free of all dents
37 Body is reasonably free of dings
38 Paint is reasonably free of scratches and chips
39 Vehicle is free of improper paint repairs or mismatched color
40 Bumpers are free of cuts, gouges and mismatched paint
41 Truck bed is in good condition
42 Truck bed-liner is in good condition and secured
43 Antenna present
Tires & Wheels
16 Transmission mounts operate properly with no signs of wear
44 Minimum of 5/32" tread depth remaining across tread width
17 Inspect transmission case and pan for leaks
18 Differential has no leaks
46 No wheel/ wheel cover damage
19 Transfer case smoothly switches from 2WD to 4WD and back
from 4WD to 2WD
Steering, Suspension, Brakes
20 Power steering system operates properly with no leaks
21 Steering has normal feel and sound.
22 Suspension-related items for wear/leaks and proper performance
23 Inspect struts/shocks for leaks and wear
24 Drive/axle shafts operate properly with no damage
25 CV joints/boots operate properly with no signs of wear
26 No abnormal vibrations and noises during brake applications
On Road Test
27 No excessive wind or road noise
28 No abnormal squeaks/rattles within the interior of the vehicle
29 No abnormal tire vibration/steering wheel shimmy during road test
45 Matching tire branding on all 4 tires
Interior Condition
47 Seat belt material condition good and intact
48 Airbag(s) present with no evidence of deployment
49 Headliner, sun visors, dash pad, upholstery, console,cup holder
trim panels and carpet are in place and in good condition
50 Seats, carpets, floor mats and headliner are free of stains
51 All headrests present
52 Free of odor, including heavy fragrance and smoke
53 Spare tire present
Interior Accesories
54 Extra key and fob available
55 Instrument panel/warning lights operate properly
56 Upon start Airbag and SRS on then off
57 ABS- No ABS light on
58 Hood and luggage compartment latches operate properly
59 Fuel door release operates properly
60 Speedometer functions properly
Pass
Fail
N/A
Interior Accesories
cont.
Pass
Fail
N/A
61 Odometer application registers mileage
62 Heater operates properly
63 A/C operates properly
64 Power locks operate properly
Failed Inspection Notes
Notes are provided on all highlighted items marked as "fail"
65 Power windows opereate poperly
66 Sunroof or convertible top opens and operates properly
67 Radio turns on/ off & operates
68 Speakers work properly
69 Navigation system operates properly
70 Backup camera operates properly
Hybrid Components
Pass
Fail
N/A
1 Hybrid battery
2 Battery control module (battery voltage sensor)
3 Hybrid power management control module
4 Electric motor/generator operates properly
5 Power inverter operates properly
6 Inverter coolant level
7 "EV/Eco" modes (or equivalent) operate properly
8 Check transaxle "park" mechanism
Failed Inspection Notes
Notes are provided on all highlighted items marked as "fail"
Required Technician Signature
I certify that all mechanical items have been inspected.
YourMechanic Technician
Date