Q SERIES Ø6mm (.236") Panel Mount LED Indicators
Distinctive features and specification
Q6_VOY1609R1US
Features
• 6mm panel mounting LED indicator
• 3mm colored diffused epoxy lens or 3mm water clear super bright LEDs
• Plated brass bezel finished in bright chrome,
black chrome or satin grey and moulded polycarbonate rear body
•
•
•
•
•
Prominent, recessed and flush bezel styles
2VDC – 28VDC
(2.0 x 0.5) solder lug terminals, pins or (200mm long) wire terminations
IP67 sealing option (EN60529)
Supplied with fixing nut and spring washer
NB: UL Recognized Component
TECHNICAL SPECIFICATIONS
Voltage
02 (No Resistor)
6VDC
12VDC
24VAC/DC
28VDC
Operating Voltage
(Min to Max)
1.8 to 3.8VDC
5.4 to 6.6VDC
10.8 to 13.2VDC
21.6 to 26.4VDC
25.2 to 30.8VDC
Operating Current
(Typical All Types)
20mA max*
20mA
20mA
20mA
20mA
Max Reverse Voltage: 5V
Viewing Angle: 30–100° (dependant on model)
Life Expectancy: 100,000 hours
Temperature Range: –40 to +85°C (operating & storage)
Torque: 4cNm
Ø 6.00 +0.15/-0.0
8,00 0,315
AF
2,00 0,079
PANEL CUTOUT
M6 x 0,50 THREAD
Standard LED Intensity
HE Red
Green
Yellow
Blue
White
Orange
Bi-color (Typical) (Red/Green)
Flush
Prominent and Recessed
40mcd
10mcd
50mcd
12mcd
30mcd
6mcd
1,200mcd
100mcd
1,200mcd
160mcd
60mcd
10mcd
20/15mcd
10/8mcd
The color is changed by reversing the polarity of the supply voltage.
Forward Voltage
2.0V
2.2V
2.1V
3.8V
3.8V
2.0V
2.0V/2.2V
Super Bright LED
HE Red
Green
Yellow
Blue
White
Orange
Prominent and Recessed
1,000mcd
1,200mcd
2000mcd
1,600mcd
1,200mcd
10,000mcd
Flush
700mcd
2,000mcd
8,000mcd
200mcd
350mcd
500mcd
Forward Voltage
2.2V
3.5V
2.3V
3.3V
3.3V
2.2V
Hyper Bright LED
HE Red
Green
Yellow
Orange
Prominent and Recessed
3,700mcd
2,000mcd
1,200mcd
4,500mcd
Flush
600mcd
350mcd
140mcd
400mcd
Forward Voltage
2.2V
3.2V
2.0V
2.2V
Luminous intensity will be reduced with lower operating current.
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal.
APEM
www.apem.com
1
Q SERIES Ø6mm (.236") Panel Mount LED Indicators
7,00
[0,275]
M6x0,5
3,50 0,138
8,75 0,344
2,0x0,5[0,078x0,02]
6,00 0,236
PINS
0,50 0,020
1,25 0,049
1,25 0,049
SOLDER LUG
M6x0,5
3,50 0,138
8,75 0,344
17,10 0,673
23,10 0,909
9,50 0,374
11,00 0,433
REAR EPOXY PINS
3,50 0,138
8,75 0,344
17,10 0,673
7,00
[0,275]
M6x0,5
7,00
[0,275]
0,50 0,020
1,25 0,049
1,25 0,049
3,50 0,138
8,75 0,344
12,00 0,472
3,50 0,138
8,75 0,344
12,00 0,472
11,00 0,433
9,50 0,374
RECESSED BEZEL
SOLDER LUG
7,00
[0,275]
M6x0,5
2,0x0,5[0,078x0,02]
2,25 0,089
8,75 0,344
18,75 0,738
6,00 0,236
2,25 0,089
8,75 0,344
SHORT BODY WIRES
7,00[0,275]
200,00+/-10
[7,874+/-0,393]
7,00
[0,275]
7,00
[0,275]
3,50 0,138
8,75 0,344
10,00 0,394
SHORT BODY PINS
M6x0,5
18,98 0,747
16,60 0,654
3,50 0,138
8,75 0,344
10,00 0,394
200,0+/-10
[7,874+/-0,393]
REAR EPOXY WIRES
M6 x0,5
0,50 0,020
1,25 0,049
1,25 0,049
7,00
[0,275]
WIRES
24,75 0,974
M6x0,5
200,0+/-10
[7,874+/-0,393]
PINS
M6x0,5
11,00 0,433
9,50 0,374
REAR EPOXY PINS
2,25 0,089
8,75 0,344
18,75 0,738
200,0+/-10
[7,874+/-0,393]
2,25 0,089
8,75 0,344
11,65 0,459
2
200,0+/-10
[7,874+/-0,393]
2,25 0,089
8,75 0,344
11,65 0,459
2,25 0,089
8,75 0,344
13,65 0,537
16,98 0,668
14,60 0,575
www.apem.com
0,50 0,020
1,25 0,049
1,25 0,049
M6 x0,5
18,10 0,713
16,60 0,654
SHORT BODY WIRES
7,00
[0,275]
1,25 0,049
1,25 0,049
M6x0,5
0,50 0,020
SHORT BODY PINS
7,00
[0,275]
7,00
[0,275]
REAR EPOXY WIRES
M6 x0,5
7,00
[0,275]
7,00
[0,275]
WIRES
M6x0,5
0,50 0,020
1,25 0,049
1,25 0,049
PROMINENT BEZEL
7,00 [0,275]
Technical Drawings
2,25 0,089
8,75 0,345
13,65 0,537
M6x0,5
200,0+/-10
[7,874+/-0,393]
APEM
Q SERIES Ø6mm (.236") Panel Mount LED Indicators
Technical Drawings
1,00 0,039
8,75 0,344
21,00 0,827
M6x0,5
200,0 +/-10
[7,874+/-0,393]
APEM
200,0+/-10
[7,874+/-0,393]
1,00 ,039
8,75 0,344
15,90 0,626
1,00 0,039
8,75 0,344
13,90 0,547
11,00 0,433
9,50 0,374
www.apem.com
M6 x0,5
16,60 0,654
18,10 0,713
SHORT BODY WIRES
7,00
[0,275]
0,50 0,020
1,25 0,049
1,25 0,049
7,00 [0,275]
7,00
[0,275]
1,00 0,039
8,75 0,344
13,90 0,547
REAR EPOXY PINS
SHORT BODY PINS
M6x0,5
11,00 0,433
9,50 0,374
WIRES
REAR EPOXY WIRES
M6 x0,5
1,00 0,039
8,75 0,344
21,00 0,827
6,00 0,236
M6x0,5
0,50 0,020
1,25 0,049
1,25 0,049
27,00 1,063
2,0x0,5 [0.078x0.02]
0,50 0,020
1,25 0,049
2,50 0,098
7,00 [0,275]
8,75 0,344
1,00 0,039
M6x0,5
PINS
7,00
[0,275]
7,00
[0,275]
SOLDER LUG
7,00 [0,275]
FLUSH BEZEL
1,00 0,039
8,75 0,344
15,90 0,626
M6x0,5
200,0 +/-10
[7,874 +/- 0,393]
3
Q SERIES Ø6mm (.236") Panel Mount LED Indicators
Overview
STANDARD OPTIONS
The Q6 Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
Q
6
P
1
B
XX
G
12
E
SERIES
MOUNTING
HOLE
BEZEL
STYLE
TERMINALS
BEZEL FINISH
TYPE OF
ILLUMINATION
LED COLOR
VOLTAGE
SEALING
P = Prominent
1 = Solder Lug
C = Bright Chrome
XX = Fixed Light
R = Red
02 = no resistor*
(Blank) = Unsealed
R = Recessed
2 = Pins
B = Black Chrome
G = Green
06 = 6VDC
E = IP67
F = Flush
3 = Wires
G = Satin Grey
KK = Flashing Light
(12V – 28VDC)
YY = Bi-color
B = Blue
Q
6 = Ø6mm
4 = Rear epoxy
Pins
Y = Yellow
W = White
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
5 = Rear epoxy
Wires
O = Orange
6 = Short body
Pins
HR = Hyper Bright Red
28 = 28VDC
7 = Short body
Wires
HG = Hyper Bright Green
28A = 28VAC/DC
HY = Hyper Bright Yellow
24A = 24VAC/DC
HO = Hyper Bright Orange
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
Example Q6F3CXXB12E
Ø6mm, flush bezel, wire terminals
bright chrome finish, fixed light,
blue, 12VDC LED, IP67 panel sealed
SO = Super Bright Orange
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
• Gold solder lug terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 24AWG UL 1061, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternative voltages consult APEM
• Bi-color LEDs, by connecting the gold solder lug (+) one color is produced,
by reversing the supply voltage another color is produced – Bi-colors are available up to 28V in DC only.
• Take care when soldering to the terminals (recommended solder temperature 300°C - 3 sec)
• Short body options are only available up to 24VDC
• Maximum panel thickness 7mm
* = For resistorless versions (02) please refer to the forward voltage on page 1
4
www.apem.com
APEM