TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
Ultrabright LED, Ø 5 mm Untinted Non-Diffused Package
FEATURES
• Untinted non-diffused lens
• Utilizing ultrabright AllnGaP (AS)
• High luminous intensity
• High operating temperature: Tj (chip junction
temperature) up to 125 °C for AllnGaP devices
• Luminous intensity and color categorized for
each packing unit
19223
DESCRIPTION
• ESD-withstand voltage: up to 2 kV according to
JESD22-A114-B
The TLC.51.. series is a clear, non-diffused 5 mm LED for
high end applications where supreme luminous intensity
required.
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
These lamps with clear untinted plastic case utilize the
highly developed ultrabright AlInGaP (AS).
• Interior and exterior lighting
The lens and the viewing angle is optimized to achieve best
performance of light output and visibility.
• Outdoor LED panels
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Central high mounted stop lights (CHMSL) for motor
vehicles
• Package: 5 mm
• Replaces incandescent lamps
• Product series: power
• Traffic signals
• Angle of half intensity: ± 9°
• Light guide design
• Instrumentation and front panel indicators
PARTS TABLE
PART
TLCS5100
COLOR
LUMINOUS INTENSITY
WAVELENGTH
FORWARD VOLTAGE
at IF
at IF
at IF
(mcd)
(nm)
(V)
TECHNOLOGY
(mA)
(mA)
(mA)
MIN.
TYP. MAX.
MIN. TYP. MAX.
MIN. TYP. MAX.
Super red
2400
7500
-
50
626
630
638
50
-
2.1
2.7
50
AllnGaP on GaAs
TLCR5100
Red
4300
11 000
-
50
611
616
622
50
-
2.1
2.7
50
AllnGaP on GaAs
TLCO5100
Soft orange
4300
12 000
-
50
600
605
611
50
-
2.1
2.7
50
AllnGaP on GaAs
TLCY5100
Yellow
3200
7500
-
50
585
590
597
50
-
2.1
2.7
50
AllnGaP on GaAs
TLCY5100-ASZ
Yellow
3200
7500
-
50
585
590
597
50
-
2.1
2.7
50
AllnGaP on GaAs
TLCYG5100
Yellow green
1350
3500
-
50
565
572
576
50
-
2.2
2.7
50
AllnGaP on GaAs
TLCPG5100
Pure green
430
1250
-
50
555
562
567
50
-
2.1
2.7
50
AllnGaP on GaAs
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
PARAMETER
Reverse voltage (1)
DC forward current
Surge forward current
Power dissipation
Junction temperature
Operating temperature range
Storage temperature range
Soldering temperature
Thermal resistance junction/ambient
TEST CONDITION
Tamb ≤ 85 °C
tp ≤ 10 μs
t ≤ 5 s, 2 mm from body
SYMBOL
VR
IF
IFSM
PV
Tj
Tamb
Tstg
Tsd
RthJA
VALUE
5
50
1
135
125
-40 to +100
-40 to +100
260
300
UNIT
V
mA
A
mW
°C
°C
°C
°C
K/W
Note
(1) Driving the LED in reverse direction is suitable for a short term application
Rev. 1.8, 03-Feb-16
Document Number: 81346
1
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLCS5100, SUPER RED
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
Luminous intensity (1)
IF = 50 mA
TLCS5100
IV
2400
7500
-
mcd
Dominant wavelength
IF = 50 mA
λd
626
630
638
nm
Peak wavelength
IF = 50 mA
λp
-
641
-
nm
Spectral bandwidth at
50 % Irel max.
IF = 50 mA
Δλ
-
20
-
nm
Angle of half intensity
IF = 50 mA
ϕ
-
±9
-
deg
Forward voltage
IF = 50 mA
VF
-
2.1
2.7
V
Reverse voltage
IR = 10 μA
VR
5
-
-
V
Temperature coefficient of VF
IF = 50 mA
TCVF
-
-2
-
mV/K
Temperature coefficient of λd
IF = 50 mA
TCλd
-
0.04
-
nm/K
Note
(1) In one packing unit I
Vmax./IVmin. ≤ 2.0
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLCR5100, RED
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
Luminous intensity (1)
IF = 50 mA
TLCR5100
IV
4300
11 000
-
mcd
Dominant wavelength
IF = 50 mA
λd
611
616
622
nm
Peak wavelength
IF = 50 mA
λp
-
622
-
nm
Spectral bandwidth at
50 % Irel max.
IF = 50 mA
Δλ
-
18
-
nm
deg
Angle of half intensity
IF = 50 mA
ϕ
-
±9
-
Forward voltage
IF = 50 mA
VF
-
2.1
2.7
V
Reverse voltage
IR = 10 μA
VR
5
-
-
V
Temperature coefficient of VF
IF = 50 mA
TCVF
-
-3.5
-
mV/K
Temperature coefficient of λd
IF = 50 mA
TCλd
-
0.05
-
nm/K
Note
(1) In one packing unit I
Vmax./IVmin. ≤ 2.0
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLCO5100, SOFT ORANGE
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
Luminous intensity (1)
IF = 50 mA
TLCO5100
IV
4300
12 000
-
mcd
Dominant wavelength
IF = 50 mA
λd
600
605
611
nm
Peak wavelength
IF = 50 mA
λp
-
611
-
nm
Spectral bandwidth at
50 % Irel max.
IF = 50 mA
Δλ
-
17
-
nm
deg
Angle of half intensity
IF = 50 mA
ϕ
-
±9
-
Forward voltage
IF = 50 mA
VF
-
2.1
2.7
V
Reverse voltage
IR = 10 μA
VR
5
-
-
V
Temperature coefficient of VF
IF = 50 mA
TCVF
-
-2.5
-
mV/K
Temperature coefficient of λd
IF = 50 mA
TCλd
-
0.1
-
nm/K
Note
(1) In one packing unit I
Vmax./IVmin. ≤ 2.0
Rev. 1.8, 03-Feb-16
Document Number: 81346
2
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLCY5100, YELLOW
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
Luminous intensity (1)
IF = 50 mA
TLCY5100
IV
3200
7500
-
mcd
Dominant wavelength
IF = 50 mA
λd
585
590
597
nm
Peak wavelength
IF = 50 mA
λp
-
593
-
nm
Spectral bandwidth at
50 % Irel max.
IF = 50 mA
Δλ
-
17
-
nm
Angle of half intensity
IF = 50 mA
ϕ
-
±9
-
deg
Forward voltage
IF = 50 mA
VF
-
2.1
2.7
V
Reverse voltage
IR = 10 μA
VR
5
-
-
V
Temperature coefficient of VF
IF = 50 mA
TCVF
-
-3.5
-
mV/K
Temperature coefficient of λd
IF = 50 mA
TCλd
-
0.1
-
nm/K
Note
(1) In one packing unit I
Vmax./IVmin. ≤ 2.0
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLCYG5100, YELLOW GREEN
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
Luminous intensity (1)
IF = 50 mA
TLCYG5100
IV
1350
3500
-
mcd
Dominant wavelength
IF = 50 mA
λd
565
572
576
nm
Peak wavelength
IF = 50 mA
λp
-
574
-
nm
Spectral bandwidth at
50 % Irel max.
IF = 50 mA
Δλ
-
15
-
nm
deg
Angle of half intensity
IF = 50 mA
ϕ
-
±9
-
Forward voltage
IF = 50 mA
VF
-
2.2
2.7
V
Reverse voltage
IR = 10 μA
VR
5
-
-
V
Temperature coefficient of VF
IF = 50 mA
TCVF
-
-4.5
-
mV/K
Temperature coefficient of λd
IF = 50 mA
TCλd
-
0.1
-
nm/K
Note
(1) In one packing unit I
Vmax./IVmin. ≤ 2.0
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLCPG5100, PURE GREEN
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
Luminous intensity (1)
IF = 50 mA
TLCPG5100
IV
430
1250
-
mcd
Dominant wavelength
IF = 50 mA
λd
555
562
567
nm
Peak wavelength
IF = 50 mA
λp
-
563
-
nm
Spectral bandwidth at
50 % Irel max.
IF = 50 mA
Δλ
-
20
-
nm
deg
Angle of half intensity
IF = 50 mA
ϕ
-
±9
-
Forward voltage
IF = 50 mA
VF
-
2.1
2.7
V
Reverse voltage
IR = 10 μA
VR
5
-
-
V
Temperature coefficient of VF
IF = 50 mA
TCVF
-
-3.5
-
mV/K
Temperature coefficient of λd
IF = 50 mA
TCλd
-
0.1
-
nm/K
Note
(1) In one packing unit I
Vmax./IVmin. ≤ 2.0
Rev. 1.8, 03-Feb-16
Document Number: 81346
3
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
LUMINOUS INTENSITY CLASSIFICATION
GROUP
LUMINOUS INTENSITY (mcd)
STANDARD
MIN.
MAX.
BB
430
860
CC
575
1150
DD
750
1500
EE
1000
2000
FF
1350
2700
GG
1800
3600
HH
2400
4800
II
3200
6400
KK
4300
8600
LL
5750
11 500
MM
7500
15 000
NN
10 000
20 000
PP
13 500
27 000
QQ
18 000
36 000
RR
24 000
48 000
SS
32 000
64 000
TT
43 000
86 000
UU
57 500
115 000
Note
• Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %.
The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each
bag (there will be no mixing of two groups on each bag).
In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one bag.
In order to ensure availability, single wavelength groups will not be orderable.
COLOR CLASSIFICATION
DOM. WAVELENGTH (nm)
GROUP
RED
SOFT ORANGE
YELLOW
YELLOW GREEN
PURE GREEN
MIN.
MAX.
MIN.
MAX.
MIN.
MAX.
MIN.
MAX.
MIN.
MAX.
0
-
-
-
-
585
588
-
-
555
559
1
611
618
-
-
587
591
-
-
558
561
2
614
622
600
603
589
594
-
-
560
563
3
-
-
602
605
592
597
-
-
562
565
4
-
-
604
607
-
-
-
-
564
567
5
-
-
606
609
-
-
565
570
-
-
6
-
-
608
611
-
-
567
572
-
-
7
-
-
-
-
-
-
569
574
-
-
8
-
-
-
-
-
-
571
576
-
-
Note
• Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm.
Rev. 1.8, 03-Feb-16
Document Number: 81346
4
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
60
100
IF - Forward Current (mA)
IF - Forward Current (mA)
50
pure green
yellow green
yellow
soft orange
red
super red
40
30
20
10
60
40
20
0
0
20
40
60
80
100
0
1.5
120
Tamb - Ambient Temperature (°C)
16710_1
100
0.8
0.6
0.4
0.2
0.0
600
yellow green
pure green
IF - Forward Current (mA)
super red
80
60
40
20
0
620
640
660
680
700
1.6
λ - Wavelength (nm)
17045_1
Fig. 2 - Relative Intensity vs. Wavelength
0°
10°
0.9
50°
0.8
60°
70°
0.7
ϕ - Angular Displacement
30°
40°
2.0
2.2
2.4
2.6
Fig. 5 - Forward Current vs. Forward Voltage
20°
1.0
1.8
VF - Forward Voltage (V)
18644
10
IV rel - Relative Luminous Intensity
IV rel - Relative Luminous Intensity
2.5
Fig. 4 - Forward Current vs. Forward Voltage
1.2
Srel - Relative Sensitivity
1.7
1.9
2.1
2.3
VF - Forward Voltage (V)
15974_1
Fig. 1 - Forward Current vs. Ambient Temperature
1.0
super red
red
soft orange
yellow
80
super red
1
0
80°
0.01
0.6
0.4
0.2
1
0
17042
94 8351
Fig. 3 - Relative Radiant Sensitivity vs. Angular Displacement
Rev. 1.8, 03-Feb-16
10
100
IF - Forward Current (mA)
Fig. 6 - Relative Luminous Flux vs. Forward Current
Document Number: 81346
5
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
Vishay Semiconductors
1.2
1.5
Irel. - Relative Luminous Intensity
Δ λ d - Change of Dom. Wavelength (nm)
www.vishay.com
super red
1.0
0.5
0.0
-0.5
-1.0
-1.5
IF - Forward Current (mA)
super red
2.0
1.5
1.0
0.5
630
650
670
red
1
0.1
1
10
Fig. 11 - Relative Luminous Flux vs. Forward Current
- Change of Dom. Wavelength (nm)
150
100
50 mA
50
10 mA
- 50
- 100
- 150
100
IF - Forward Current (mA)
1.5
red
1.0
0.5
0.0
- 0.5
- 1.0
d
VF - Change of Forward Voltage (mV)
super red
30 mA
- 1.5
- 25
0
25
50
75
100
Tamb - Ambient Temperature (°C)
Fig. 9 - Change of Forward Voltage vs. Ambient Temperature
Rev. 1.8, 03-Feb-16
610
λ- Wavelength (nm)
17037
200
17039_1
590
10
100
250
- 200
- 50
0.2
0.01
- 25
0
25
50
75
Tamb - Ambient Temperature (°C)
Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature
0
0.4
Fig. 10 - Relative Intensity vs. Wavelength
IV rel - Relative Luminous Intensity
IV rel - Relative Luminous Intensity
2.5
17040_1
0.6
16007
Fig. 7 - Change of Dominant Wavelength vs. Ambient Temperature
0.0
- 50
0.8
0.0
570
10 20 30 40 50 60 70 80 90 100
17043-1
red
1.0
17038
10 20 30 40 50 60 70 80 90 100
IF - Forward Current (mA)
Fig. 12 - Changes of Dominant Wavelength vs. Forward Current
Document Number: 81346
6
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
1.2
IV rel - Relative Luminous Intensity
IV rel - Relative Luminous Intensity
2.5
red
2.0
1.5
1.0
0.5
0.0
- 50
- 25
0
25
50
75
0.4
0.2
620
640
660
10
200
red
50 mA
150
100
30 mA
0
10 mA
- 50
- 100
- 150
- 200
- 50
17034
600
Fig. 16 - Relative Intensity vs. Wavelength
250
50
580
λ - Wavelength (nm)
16314
soft orange
IV rel - Relative Luminous Intensity
ΔVF - Change of Forward Voltage (mV)
0.6
0.0
560
Fig. 13 - Relative Luminous Intensity vs. Ambient Temperature
1
0.1
0.01
- 25
0
25
50
75
1
100
Tamb - Ambient Temperature (°C)
Fig. 14 - Change of Forward Voltage vs. Ambient Temperature
red
4
2
0
-2
-4
10
IF - Forward Current (mA)
100
Fig. 17 - Relative Luminous Flux vs. Forward Current
- Change of Dom. Wavelength (nm)
6
17023
1.5
soft orange
1.0
0.5
0.0
- 0.5
- 1.0
d
Δλd- Change of Dom. Wavelength (nm)
0.8
100
Tamb - Ambient Temperature (°C)
17035
soft orange
1.0
-6
- 50
17036
- 1.5
- 25
0
25
50
75
100
Tamb - Ambient Temperature (°C)
Fig. 15 - Change of Dominant Wavelength vs.
Ambient Temperature
Rev. 1.8, 03-Feb-16
17024
10 20 30 40 50 60 70 80 90 100
IF - Forward Current (mA)
Fig. 18 - Change of Dominant Wavelength vs. Forward Current
Document Number: 81346
7
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
2.5
IV rel. - Relative Luminous Intensity
1.2
IV rel - Relative Luminous Intensity
soft orange
2.0
1.5
1.0
0.5
0.0
- 50
17021
VF - Change of Forward Voltage (mV)
0.2
540
560
580
600
620
640
λ - Wavelength (nm)
Fig. 22 - Relative Intensity vs. Wavelength
IV rel - Relative Luminous Intensity
30 mA
150
100
soft orange
50
10 mA
- 50
- 100
- 150
yellow
1
0.1
0.01
- 25
0
25
50
75
Tamb - Ambient Temperature (°C)
1
100
17018
6
soft orange
4
2
0
-2
100
1.5
yellow
1.0
0.5
0.0
- 0.5
- 1.0
d
d
-4
10
IF - Forward Current (mA)
Fig. 23 - Relative Luminous Flux vs. Forward Current
- Change of Dom. Wavelength (nm)
Fig. 20 - Change of Forward Voltage vs. Ambient Temperature
- Change of Dom. Wavelength (nm)
0.4
10
50 mA
200
17020
0.6
16008
250
- 200
- 50
0.8
0
- 25
0
25
50
75
100
Tamb - Ambient Temperature (°C)
Fig. 19 - Relative Luminous Intensity vs. Ambient Temperature
0
yellow
1.0
-6
- 50
17022
- 1.5
- 25
0
25
50
75
100
Tamb - Ambient Temperature (°C)
Fig. 21 - Change of Dominant Wavelength vs.
Ambient Temperature
Rev. 1.8, 03-Feb-16
17019
10 20 30 40 50 60 70 80 90 100
IF - Forward Current (mA)
Fig. 24 - Change of Dominant Wavelength vs. Forward Current
Document Number: 81346
8
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
1.2
IV rel - Relative Luminous Intensity
yellow
2.0
1.5
1.0
0.5
0.0
- 50
- 25
0
25
50
75
Tamb - Ambient Temperature (°C)
17016
Δλd - Change of Dom. Wavelength (nm)
yellow
4
2
0
-2
-4
0
25
50
75
Δ VF - Change of Forward Voltage (mV)
250
30 mA
200
yellow
150
100
50
0
10 mA
- 50
- 100
- 150
- 200
- 50
17015
- 25
0
25
50
75
100
Tamb - Ambient Temperature (°C)
Fig. 27 - Change of Forward Voltage vs. Ambient Temperature
Rev. 1.8, 03-Feb-16
0.2
540
560
580
600
620
- Wavelength (nm)
yellow green
1
0.1
0.01
1
18646
Fig. 26 - Change of Dominant Wavelength vs.
Ambient Temperature
50 mA
0.4
10
100
Tamb - Ambient Temperature (°C)
17017
0.6
Fig. 28 - Relative Intensity vs. Wavelength
IV rel - Relative Luminous Intensity
6
- 25
0.8
18647
Fig. 25 - Relative Luminous Intensity vs. Ambient Temperature
-6
- 50
yellow green
1.0
0.0
520
100
10
100
IF - Forward Current (mA)
Fig. 29 - Relative Luminous Flux vs. Forward Current
Δλd- Change of Dom. Wavelength (nm)
IV rel - Relative Luminous Intensity
2.5
3
yellow green
2
1
0
-1
-2
-3
18649
10 20 30 40 50 60 70 80 90 100
IF - Forward Current (mA)
Fig. 30 - Change of Dominant Wavelength vs. Forward Current
Document Number: 81346
9
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
1.2
IV rel - Relative Luminous Intensity
2.5
IV rel - Relative Luminous Intensity
yellow green
2.0
1.5
1.0
0.5
0
- 50
18619
- 25
0
25
50
75
Tamb - Ambient Temperature (°C)
0.6
0.4
0.2
0.0
510
530
550
570
590
610
λ - Wavelength (nm)
18648
Fig. 34 - Relative Intensity vs. Wavelength
10
8
yellow green
IV rel - Relative Luminous Intensity
Δ λ d - Change of Dom. Wavelength (nm)
0.8
100
Fig. 31 - Relative Luminous Intensity vs. Ambient Temperature
6
4
2
0
-2
-4
-6
-8
- 50
0
25
50
75
0.1
yellow green
50 mA
400
300
200
100
10 mA
- 100
100
3
pure green
2
1
0
-1
-2
d
- 200
10
IF - Forward Current (mA)
Fig. 35 - Relative Luminous Flux vs. Forward Current
- Change of Dom. Wavelength (nm)
30 mA
1
18645
600
0
1
100
Fig. 32 - Change of Dominant Wavelength vs.
Ambient Temperature
500
pure green
0.01
- 25
Tamb - Ambient Temperature (°C)
18620
Δ VF - Change of Forward Voltage (mV)
pure green
1.0
- 300
- 50
18618_1
-3
- 25
0
25
50
75
Tamb - Ambient Temperature (°C)
100
Fig. 33 - Change of Forward Voltage vs. Ambient Temperature
Rev. 1.8, 03-Feb-16
18650
10 20 30 40 50 60 70 80 90 100
IF - Forward Current (mA)
Fig. 36 - Change of Dominant Wavelength vs. Forward Current
Document Number: 81346
10
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
Vishay Semiconductors
3.0
pure green
2.5
2.0
1.5
1.0
0.5
0.0
- 50
18616
- 25
0
25
50
75
100
Tamb - Ambient Temperature (°C)
Δλd - Change of Dom. Wavelength (nm)
Fig. 37 - Relative Luminous Intensity vs. Ambient Temperature
Δ VF - Change of Forward Voltage (mV)
IV rel - Relative Luminous Intensity
www.vishay.com
600
pure green
500
400
30 mA
300
50 mA
200
100
0
- 100
10 mA
- 200
- 300
- 50
18615
- 25
0
25
50
75
100
Tamb - Ambient Temperature (°C)
Fig. 39 - Change of Forward Voltage vs. Ambient Temperature
8
pure green
6
4
2
0
-2
-4
-6
-8
- 50
18617
- 25
0
25
50
75
100
Tamb - Ambient Temperature (°C)
Fig. 38 - Change of Dominant Wavelength vs.
Ambient Temperature
Rev. 1.8, 03-Feb-16
Document Number: 81346
11
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
A
C
(5.1)
< 0.7
7.7 ± 0.15
8.7 ± 0.3
12.9
± 0.3
Ø 5.8
± 0.15
R 2.49 (sphere)
35.9
± 0.55
Area not plane
1.1 ± 0.25
± 0.15
1 min.
Ø5
technical drawings
according to DIN
specifications
0.5
+ 0.15
- 0.05
Drawing-No.: 6.544-5258.04-4
Issue: 9; 23.07.10
0.5
+ 0.15
- 0.05
2.54 nom.
96 12121
TAPE
AMMOPACK
Tape feed
Diodes: anode before cathode
Phototransistors: emitter before collector
Code 21
Adhesive tape
Identification label
Reel
Label
Diodes:
cathode before anode
Phototransistors:
collector before emitter
Code 12
C
Paper
A
Tape
94 8671
Fig. 40 - LED in Tape
B
94 8667-1
Fig. 41 - Tape Direction
Note
• The new nomenclature for ammopack is e.g. ASZ only, without
suffix for the LED orientation. The carton box has to be turned to
the desired position: “+” for anode first, or “-” for cathode first.
AS12Z and AS21Z are still valid for already existing types, BUT
NOT FOR NEW DESIGN.
Rev. 1.8, 03-Feb-16
Document Number: 81346
12
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510.
www.vishay.com
Vishay Semiconductors
TAPE DIMENSIONS in millimeters
±2
±1
9 ± 0.5
12 ± 0.3
18
+1
- 0.5
0.3 ± 0.2
12.7 ± 1
0.9 max.
Ø 4 ± 0.2
2.54
+ 0.6
- 0.1
5.08 ± 0.7
6.35 ± 0.7
12.7 ± 0.2
Measure limit over 20 index-holes: ± 1
Quantity per:
Reel
(Mat.-no. 1764)
1000
94 8172
Rev. 1.8, 03-Feb-16
Option
Dim. “H” ± 0.5 mm
AS
17.3
Document Number: 81346
13
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000