AGS Series Control Stations IP65 Waterproof Stainless Steel Control Stations High Corrosion and Weather Resistant The AGS series control stations are designed for mounting various types of switches/pilot lights in various combinations. Standard control stations are available with predetermined specifications of cable lead-in holes and switches/pilot lights mounted (contact configurations, voltage, button colors, and nameplates). ••Wide variety of combinations of switches/pilot lights are possible. Select from a wide variety of ø30 series switches/pilot lights. ••Buff finish available upon request. Specifications Degree of Protection IP65 (IEC60529) (Note 1) Key selector switch: Splash-proof IP54 Material (Box) Stainless steel plate (thickness 1 mm) Yellow semi-gloss (Munsell 5Y7/1) Coating Color 1 column: Outside only (Melamine coating) 2 or 3 column: Both inside and outside Rated Insulation 600V Voltage Insulation Resistance 5 MΩ minimum (500V DC megger) Dielectric Strength Between live and dead parts: (Note 2) 2500V AC, 1 minute Ambient temperature: -25 to +50°C (no freezing) Standard Operating Relative humidity: 45 to 85% (no condensation) Conditions 1 to 5 holes × 1 column, Enclosure Style 3 to 5 holes × 2 or 3 columns Wall mount/Pole mount Reducer bushing (Gland hub also available) Cable Lead-in G1 (28 mm) (Wall Mount) 1 to 3 holes × 1 column: G3/4 (22 mm) Applicable Switches/ IDEC ø30 mm series, AM ammeter Pilot Lights (except enclosed type units) Note 1: Degree of protection depends on the switches/pilot lights mounted on the enclosure. When IP65 switches/pilot lights are mounted, the entire control station has IP65 characteristics. (See page G-2) Note 2: AM ammeter: 2000V AC, 1 minute Switch/Pilot Light Mounting Holes The holes for mounting switches/pilot lights are 30.5 mm in diameter with an anti-rotation notch. Mounting centers are 50 mm. Lead-in Fittings (Wall Mount) A reducer bushing made of brass is supplied for connecting a steel conduit to lead in cables. 1 column × 1 to 3 holes: With one G3/4 for 22 mm conduit 1 column × 4 or 5 holes: With one G1 for 28 mm conduit 2 columns × 2 or 3 holes: With two G3/4 for 22 mm conduit 2 columns × 4 or 5 holes: With two G1 for 28 mm conduit 3 columns × 2 or 3 holes: With three G3/4 for 22 mm conduit 3 columns × 4 or 5 holes: With three G1 for 28 mm conduit Note: Mounting other than standard (e.g. one bushing for 2 column, one or two bushings for 3 column) Is not available. In this case, a plug is supplied. HNG gland hubs for lead in cables are also available. Stand Pole (Pole Mount) The pole is made of carbon steel pipe, and the base is made of cast iron. The coating color is the same as the enclosure, yellow (semi-gloss). Enclosure Switch/ Pilot Light Stainless Steel Screws Reducer Bushing Pole Base G-34 AGS Series Control Stations Control Stations with Switches/Pilot Lights The standard control stations are available with selected combinations of switches/pilot lights as listed below. For the dimensions and mounting centers, see the figures on page G-37. Control Station Style Part No. AGS2105M Switches/Pilot Lights Mounted on Standard Control Stations Specifications Flush, 1NC Pushbutton ABN111 * Flush, 1NO-1NC PB ABN311R ø40 mushroom, 1NO-1NC ATN420 Toggle lever, 2NO HN1E-BV411R Emergency stop, 1NO-1NC APN118 * Dome, 110V AC (2W) APN128 * Dome, 220V AC (2W) ASN311 Knob, 2-position, 1NO-1NC ASN111 Knob, 3-position, 1NO-1NC ASN3K11 Key, 2-position, 1NO-1NC AM ammeter (See page G-38) Specify capacity (Part No.) Coating color of the meter bezel: N1.5 (polish) Pilot Light (Incandescent) Selector Switch SS Meter A Note: Specify a button or lens color code in place of *: Pushbutton: B (black), G (green), R (red) Pilot Light: G (green), R (red), W (white) Flush pushbuttons are supplied with black, green, and red color caps. 1-column Package Quantity: 1 Control Station Pole Mount / 1 hole Wall Mount / 1 hole Style Part No. ABN110 ON AGS1102M PB ABN311R OFF AGS1103M PL APN118R Without nameplate AGS1105M SS ASN311 HAND-AUTO AGS1106M SS ASN111 HAND-OFF-AUTO AGS2108M AGS2110M * AGS2115M Mounted Switches/Pilot Lights NA Nameplate Part No. Legend PB AGS2107M AGS2113M AGS2101SM AGS2107SM SS ASN3K11 AGS1108M PB AGS1111M PL PB PL SS PL SS PL SS PB PB PL PB PB PB PL SS PB PB PL AGS3103M PB PB PB AGS3104M PB SS PL AGS3105M AGS1107M * PL PB PL AGS3102M Symbol AGS1101M PL OFF-ON PL ATN420 Without nameplate ON-OFF on bezel PL PB HN1EBV411R EMERGENCY STOP AGS1101SM PB ABN110 ON AGS1102SM PB ABN311R OFF AGS1111SM PB HN1EBV411R EMERGENCY STOP ABN110 ABN101 ON OFF ABN111 ABN111 ON OFF AGS2101M Wall Mount / 2 holes Wall Mount / 2 holes Flush, 1NO ABN101 * Pole Mount / 2 holes ABN110 * AGS2106M AGS2102M AGS2103M AGS2104M PB PB PB PB PL PL PL PL APN118R APN118G Without nameplate APN128R APN128G Without nameplate AGS3106M PL PL Pole Mount / 3 holes PL Part No. Wall Mount / 3 holes Switch/Pilot Light Mounted Switches/Pilot Lights NA Nameplate Part No. Legend Symbol Switches & Pilot Lights APN118R ABN111 Without nameplate STOP Flush Silhouette Switches APN128R ABN111 Without nameplate STOP Emergency Stop Switches APN118R ASN311 Without nameplate HAND-AUTO Control Stations APN128R ASN311 Without nameplate HAND-AUTO Display Lights APN128R ASN3K11 Without nameplate OFF-ON Operator Interfaces ABN110 ABN311R ON OFF APN128R ATN420 Without nameplate ON-OFF on bezel ABN110 ABN101 PLCs Softwares ON OFF Relays APN118R ASN311 Without nameplate HAND-AUTO Sockets APN118R ABN110 ABN101 Without nameplate ON OFF APN128R ABN110 ABN101 Without nameplate ON OFF ABN111 ABN111 ASN311 APN118W APN118R APN118G ON OFF HAND-AUTO Timers Terminal Blocks Circuit Protectors Power Supplies Without nameplate Sensors APN128W APN128R APN128G Without nameplate Ex-proof Control Boxes APN118R ABN110 ABN101 Without nameplate ON OFF Barriers PL AGS3102SM PB PB PB AGS3104SM PB SS ABN111 ABN111 ASN311 ON OFF HAND-AUTO Degree of protection marked with * is splash-proof IP54. LEDs Safety Products Information Degree of protection marked with * is splash-proof IP54. G-35 AGS Series Control Stations Wall • Pole / 4 holes Pole Mount AGS4101S Wall Mount AGSM4101 Pole Mount AGSM4101S Wall Mount AGS4102 Pole Mount AGS4102S Wall Mount AGS5101 Mounted Switches/Pilot Lights NA Nameplate Part No. Legend PL PB APN128R APN128G ABN111 ABN111 Without nameplate Without nameplate ON OFF A (Note ) AM ammeter Without nameplate PL PB PB ABN111 ABN111 PB PL APN128R ABN111 ABN111 ASN311 Without nameplate ON OFF HAND-AUTO SS APN128R APN128G ABN111 ABN111 ASN311 Without nameplate Without nameplate ON OFF HAND-AUTO A (Note) AM ammeter Without nameplate APN128R ABN111 ABN111 Without nameplate ON OFF PB PB SS PL PL Wall • Pole / 5 holes PB Pole Mount AGS5101S Wall Mount AGSM5101 PB PL Pole Mount AGSM5101S ON OFF PB PB Note: Specify the Part No. of the meter to select a required capacity. 2-column Package Quantity: 1 Control Station Wall • Pole / 4 holes Wall • Pole / 3 holes Style Part No. Wall Mount AGS3801 Pole Mount AGS3801S Wall Mount AGS3802 Pole Mount AGS3802S Wall Mount AGS4801 PB PB PB PB SS SS PL PL PB PB PB PB PL PL PL PL PB PB Pole Mount AGS4801S Wall Mount AGS5801 Wall • Pole / 5 holes Mounted Switches/Pilot Lights NA Nameplate Part No. Legend Symbol PB PB PL PL Wall Mount AGSM5801 ON OFF HAND-AUTO APN128R ABN111 ABN111 Without nameplate ON OFF APN128R APN128G ABN111 ABN111 Without nameplate Without nameplate ON OFF SS SS APN128R APN128G ABN111 ABN111 ASN311 Without nameplate Without nameplate ON OFF HAND-AUTO AA (Note) AM ammeter Without nameplate APN128R ABN111 ABN111 Without nameplate ON OFF PL PL PB PB Pole Mount AGS5801S ABN111 ABN111 ASN311 PB PB PL PL PB PB PB PB Note: Specify the Part No. of the meter to select a required capacity. G-36 3-column Package Quantity: 1 Control Station Style Wall • Pole / 3 holes Wall Mount AGS4101 Symbol Wall • Pole / 4 holes Part No. Mounted Switches/Pilot Lights NA Nameplate Symbol Part No. Legend Part No. Wall Mount AGS3901 PB PB PB Pole Mount AGS3901S SS SS SS PB PB PB Wall Mount AGS3902 PL PL PL Pole Mount AGS3902S APN128R APN128G ABN111 ABN111 Without nameplate Without nameplate ON OFF SS SS SS APN128R APN128G ABN111 ABN111 ASN311 Without nameplate Without nameplate ON OFF HAND-AUTO AAA (Note) AM ammeter Without nameplate PL PL PL PL PL PL PB PB PB PB PB PB Pole Mount AGS4901S PL PL PL PL PL PL PB PB PB PB PB PB Pole Mount AGS5901S Wall Mount AGSM5901 PL PL PL Pole Mount AGSM5901S ON OFF HAND-AUTO Without nameplate ON OFF PB PB PB Wall Mount AGS4901 ABN111 ABN111 ASN311 APN128R ABN111 ABN111 PB PB PB Wall Mount AGS5901 Wall • Pole / 5 holes Control Station Style PB PB PB PB PB PB APN128R ABN111 ABN111 Without nameplate ON OFF Note: Specify the Part No. of the meter to select a required capacity. Ordering Information When ordering control stations with switches/pilot lights: Specify the Part No. of the control station. When ordering enclosures without switches/pilot lights, specify the following items. 1. Part No. of the enclosure 2. Part No. and specifications of the switches/pilot lights to be mounted (lens color, button color, etc.) 3. Nameplate 4. Lead-in fitting Only when ordering the gland hub for leading in cables, specify Part No. and the cable outside diameter (R). 5. Other specifications Ordering Example Part No. of Enclosure Switch/Pilot Light and Nameplate AGS APN128R APN126G ABN210B, with NA-1 ABN201R, with NA-2 ASN311, with NA-32 Note: Any ø30 mm series switches/pilot lights are selectable. Take into consideration the degree of protection of the switch/pilot light and the effective depth of the enclosure. AGS Series Control Stations Empty Enclosures 50 50 1 column × 4 or 5 holes AGS411 AGS510 AGS511 AGS411-BUFF AGS510-BUFF AGS511-BUFF 50 Coating Buffing 1 column × 3 holes AGS310M AGS311M AGS310M-BUFF AGS311M-BUFF 50 1 column × 1 or 2 holes AGS210M AGS211M AGS212M AGS210M-BUFF AGS211M-BUFF AGS212M-BUFF Style Part No. Package Quantity: 1 1.6 kg 2 columns × 5 holes 3 columns × 3 holes AGS580 AGS581 AGS390 AGS391 AGS580-BUFF AGS581-BUFF AGS390-BUFF AGS391-BUFF 2.4 kg 3 columns × 5 holes AGS590 AGS591 AGS590-BUFF AGS591-BUFF 140 140 Display Lights Operator Interfaces PLCs 50 Weight (Approx.) •Switch/Pilot Light Mounting Holes .5 ø30 3.8 kg 4.6 kg • Effective Depth inside the Enclosure (From the lid surface to the inside bottom) *AGS210, 310: 104 *AGS210M, 310M: 104 *AGS510: 105 5 5. ø6 4.5 31.7 Control Stations 50 Shape 50 70 70 50 1.2 kg 2 columns × 3 holes AGS380 AGS381 AGS380-BUFF AGS381-BUFF Flush Silhouette Switches Emergency Stop Switches Shape Weight (Approx.) Style Coated Part No. Buff Switches & Pilot Lights 4.8 kg 6.5 kg (2- or 3-column) (1-column) Softwares Relays 104∗ 1 105 1 (Meter Mounting Hole) Sockets All dimensions in mm. Dimensions All dimensions in mm. 3-hole × 1 column ø230 ø2 0 G3/4 2 holes 3 holes 4/5 holes 1320 1370 1500 Wall Mount 1.2 kg 1.6 kg 2.4 kg Pole Mount 6.8 kg 7.2 kg 8.0 kg Barriers 2 4-ø10 106 Safety Products M6 Grounding terminal B A B A LEDs 2 Mounting hole 35 Mounting hole 3 20 3 10 3 00 ø230 10 4 -ø 1 0 106 Ex-proof Control Boxes 4-ø14 mounting hole G1 (28mm) 2-, 3-, 4- or 5-hole × 3 columns 2-, 3-, 4- or 5-hole × 2 columns 230 22 0 210 36 Sensors 0 H Weight (Approx.) Grounding terminal Power Supplies 35 H M4 M6 Grounding terminal 10 350 36 4-M5×12 (W/SW sems) M4 Grounding terminal 1 hole Circuit Protectors 192 220 Hinge M4 Grounding terminal G3/4 9 36 4-M5×12 (W/SW sems) Terminal Blocks 1.5 H 35 100 142 4-ø7 (Mounting hole) 4-ø7 Mounting hole 95 9 Hinge 170 4-ø7 (Mounting hole) 110 35 1.5 106 95 106 115 1.5 106 150 110 4- or 5-hole × 1 column 50 115 110 95 115 250 1- or 2-hole × 1 column Timers Information 0 ø20 4-ø14 mounting hole 70 (Lead in position) A B H G Wall Mount Weight (Approx.) Pole Mount 2–G M4 3 6 .5 grounding terminal 70 70 (Lead in position) 2-column 2 holes 3 holes 4 holes 5 holes 250 350 180 280 1400 1500 3/4 (22 mm) 1 (28 mm) 3.8 kg 4.6 kg 9.3 kg 10.4 kg 3–G M4 36.5 grounding terminal 3-column 2 holes 3 holes 4 holes 5 holes 50 350 180 280 1400 1500 3/4 (22 mm) 1 (28 mm) 4.8 kg 6.5 kg 10.6 kg 12.2 kg G-37