SP410/0/14/3/1/FC Manual Reset Option Allows Acknowledgement of Pressure Switch Relay Change The manual reset option allows you to verify that the relay state has changed on BETA pressure , vacuum and temperature switches. Available on the C-Series enclosure only, the option features an externally mounted reset switch with a weatherproof exible cover. The switch relay will not return to a normal,unalarmed condition unless the reset is manually pushed. This allows acknowledgement of the alarm condition and requires the process to return to a normal condition below the set point before a reset can occur. The manual reset option is available only with the SE and SG micro. The SE micro is used on applications that require actuation on increasing pressure, and the SG micro is used on applications that require actuation on decreasing pressure. The manual reset option is included when the SG or SE micro switch is selected and is only available as an SPST relay design. C-Series with Manual Reset Option Manual Reset Switch For critical applications, where relay acknowledgement is vital, consider the manual reset option from BETA. C-Series with Manual Reset Option Cut-A-Way Phone: +31 70 3199 700 www.beta-b.nl Page 1 - (March 2014) E-mail: 2sales@beta-b.nl