spaceLED system
spaceLED system overview
T
RoHS
➅
U
➃
➂
O
➁
PH
Highlights:
•uniform illumination from a small number of
modules
•individually adjustable luminance
•minimal heat generation
•high reliability and safety
•protection rating IP 54 for contacts
•high current carrying capacity
•flexibility
•no tools required for installing
•simple replacement of
spaceLED modules
spaceLED system data
max. current
max. voltage
system wattage
wire cross section
protection rating
ambient temperature
materials
➀
➁
➂
Properties:
•high-power LED in COB technology
•colour temperature white: ➃
warm white (WW): 3,000 K
neutral white (NW): 4,200 K
daylight white (DL): 6,500 K
•integrated current source to stabilise
luminous flux
•coated with protective varnish for applications
with high humidity (direct bedewing)
•ingress protection IP 00
•broad 140° light distribution for uniform
illumination
•fixing: pre-mounted double sided adhesive tape,
spaceLED mounting plate
•identification of polarity: + red / – black
•pluggable
AS
E
Applications:
•
module chain system for highlighting lines
and edges and for backlighting letters and symbols
•backlighting of complex contours
•optimised for use in illuminated advertising
(lettering, surface)
•edge lighting of transparent or diffuse materials
D
➀
6 A
42 V AC / 60 V DC (SELV)
360 VA max.
2 x 0.5 mm²
IP 54
-25 → +55 °C
protection set PE LD
all other plastic parts PBT
wiring insulation PVC
inserts tinned copper
Data sheet 03/10-241-6  We reserve the right to make technical changes without prior notice.
spaceLED chain
spaceLED modules
spaceLED feeder
➄
➃
➄
➅
spaceLED bridge
spaceLED mounting plate
spaceLED protection set
Notes:
•for uniform backlighting:
minimum distance to cover > 40 mm
•reversing the polarity may damage the
spaceLED!
•none of the components of the
spaceLED
(substrate, LED, electronic components etc.) may
be exposed to tensile or compressive stresses
•for further information on installation please refer
to the brochure entitled “
installation
instructions”
spaceLED system
spaceLED P601 – 3 COB module
T
5
U
16 ±0,4
46 ±0,4
1,6 ±0,2
2,0
RoHS
type
article
number
89600099
89600100
89600101
89600102
89600238
89600103
89600109
PH
P601 R
P601 A
P601 G
P601 B
P601 WW
P601 NW
P601 DL
AS
E
Highlights:
•patented
spaceLED contact system, IP 54
•high reliability and safety
•flexibility
•no tools required for installing
•simple replacement of
spaceLED modules
Properties:
•high-power LED in COB technology
•dimmable by pulse width modulation (PWM)
•colour temperature white: ➃
warm white (WW): 3,000 K
neutral white (NW): 4,200 K
daylight white (DL): 6,500 K
•integrated current source to stabilise
luminous flux
•broad 140° light distribution for uniform
illumination
D
Applications:
•
module chain system for highlighting lines
and edges and for backlighting letters and symbols
•backlighting of complex contours
•optimised for use in illuminated advertising
(lettering, surface)
•edge lighting of transparent or diffuse materials
•suitable for use with
profile Z202 / 203
O
tc 
colour
red
amber
green
blue
warm white
neutral white
daylight white
wavelength
colour temp.
624–630 nm
586–592 nm
520–540 nm
460–465 nm
3,000 K
4,200 K
6,500 K
light points
per module
3
3
3
3
3
3
3
typ. luminous flux
lm ➀
6.5
5.0
8.7
1.6
7.1
9.5
10.7
all values at ta = 25 °C
➀ Tolerance range for optical and electrical data: ±15 %
➁ Exceeding the maximum operating voltage leads to an overload on the
spaceLED module.
This may in turn result in a significant reduction in lifetime or even destruction of the
spaceLED.
Tolerance range for the supply voltage: 8 V: +2 V / -0 V; 12 V: +2 V / -0 V
➂ If the maximum temperature limits are exceeded, the life of the module will be greatly reduced or the
module may be damaged. The temperature of the
spaceLED at the tc point in the thermally
stable state by means of a temperature sensor or temperature-sensitive sticker (available for example
from www.conrad.com, www.rs-components.com) as per EN60598-1.
For the precise position of the tc point see the above diagram.
➃ For colour temperatures and tolerances see page 7.
Data sheet 03/10-241-6  We reserve the right to make technical changes without prior notice.
voltage
V DC ➁
8
8
12
12
12
12
12
Notes:
•reversing the polarity may damage the
spaceLED!
•none of the components of the
spaceLED
(substrate, LED, electronic components etc.) may
be exposed to tensile or compressive stresses
•for further information on installation please refer
to the brochure entitled “
installation
instructions”
power
W➀
0.5
0.5
0.5
0.5
0.5
0.5
0.5
ta
°C
-25 → +55
-25 → +55
-25 → +55
-25 → +55
-25 → +55
-25 → +55
-25 → +55
tc point
°C ➂
75
75
75
75
75
75
75
dimensions
mm
46 x 16
46 x 16
46 x 16
46 x 16
46 x 16
46 x 16
46 x 16
packing
unit
50
50
50
50
50
50
50
spaceLED system
spaceLED P602 – 6 COB module
article
number
89600104
89600105
89600106
89600107
89600239
89600108
89600110
PH
P602 R
P602 A
P602 G
P602 B
P602 WW
P602 NW
P602 DL
O
AS
E
Highlights:
•patented
spaceLED contact system, IP 54
•high reliability and safety
•flexibility
•no tools required for installing
•simple replacement of
spaceLED modules
Properties:
•high-power LED in COB technology
•dimmable by pulse width modulation (PWM)
•colour temperature white: ➃
warm white (WW): 3,000 K
neutral white (NW): 4,200 K
daylight white (DL): 6,500 K
•integrated current source to stabilise
luminous flux
•broad 140° light distribution for uniform
illumination
D
Applications:
•
module chain system for highlighting lines
and edges and for backlighting letters and symbols
•backlighting of complex contours
•optimised for use in illuminated advertising
(lettering, surface)
•edge lighting of transparent or diffuse materials
•suitable for use with
profile Z202 / 203
U
16 ±0,4
tc 
type
T
5
100 ±0,4
1,6 ±0,2
2,0
RoHS
colour
red
amber
green
blue
warm white
neutral white
daylight white
wavelength
colour temp.
624–630 nm
586–592 nm
520–540 nm
460–465 nm
3,000 K
4,200 K
6,500 K
light points
per module
6
6
6
6
6
6
6
typ. luminous flux
lm ➀
12.9
9.9
17.3
3.3
14.2
19.0
21.4
all values at ta = 25 °C
➀ Tolerance range for optical and electrical data: ±15 %
➁ Exceeding the maximum operating voltage leads to an overload on the
spaceLED module.
This may in turn result in a significant reduction in lifetime or even destruction of the
spaceLED.
Tolerance range for the supply voltage: 8 V: +2 V / -0 V; 12 V: +2 V / -0 V
➂ If the maximum temperature limits are exceeded, the life of the module will be greatly reduced or the
module may be damaged. The temperature of the
spaceLED at the tc point in the thermally
stable state by means of a temperature sensor or temperature-sensitive sticker (available for example
from www.conrad.com, www.rs-components.com) as per EN60598-1.
For the precise position of the tc point see the above diagram.
➃ For colour temperatures and tolerances see page 7.
Data sheet 03/10-241-6  We reserve the right to make technical changes without prior notice.
voltage
V DC ➁
8
8
12
12
12
12
12
Notes:
•reversing the polarity may damage the
spaceLED!
•none of the components of the
spaceLED
(substrate, LED, electronic components etc.) may
be exposed to tensile or compressive stresses
•for further information on installation please refer
to the brochure entitled “
installation
instructions”
power
W➀
1.0
1.0
1.0
1.0
1.0
1.0
1.0
ta
°C
-25 → +55
-25 → +55
-25 → +55
-25 → +55
-25 → +55
-25 → +55
-25 → +55
tc point
°C ➂
75
75
75
75
75
75
75
dimensions
mm
100 x 16
100 x 16
100 x 16
100 x 16
100 x 16
100 x 16
100 x 16
packing
unit
50
50
50
50
50
50
50
spaceLED system
spaceLED P603 – 6 COB module
5
46 ±0,4
U
T
82 ±0,4
1,6 ±0,2
2,0
RoHS
type
article
number
89600220
89600221
89600223
89600222
89600240
89600224
89600225
PH
P603 R
P603 A
P603 G
P603 B
P603 WW
P603 NW
P603 DL
AS
E
Highlights:
•patented
spaceLED contact system, IP 54
•high reliability and safety
•flexibility
•no tools required for installing
•simple replacement of
spaceLED modules
Properties:
•high-power LED in COB technology
•dimmable by pulse width modulation (PWM)
•colour temperature white: ➃
warm white (WW): 3,000 K
neutral white (NW): 4,200 K
daylight white (DL): 6,500 K
•integrated current source to stabilise
luminous flux
•broad 140° light distribution for uniform
illumination
D
Applications:
•
module chain system for highlighting lines
and edges and for backlighting letters and symbols
•backlighting of complex contours
•optimised for use in illuminated advertising
(lettering, surface)
O
tc 
colour
red
amber
green
blue
warm white
neutral white
daylight white
wavelength
colour temp.
624–630 nm
584–594 nm
520–540 nm
455–465 nm
3,000 K
4,200 K
6,500 K
light points
per module
6
6
6
6
6
6
6
typ. luminous flux
lm ➀
12.9
9.9
21.5
6.3
23.8
30.6
34.0
all values at ta = 25 °C
➀ Tolerance range for optical and electrical data: ±15 %
➁ Exceeding the maximum operating voltage leads to an overload on the
spaceLED module.
This may in turn result in a significant reduction in lifetime or even destruction of the
spaceLED.
Tolerance range for the supply voltage: 8 V: +2 V / -0 V; 12 V: +2 V / -0 V
➂ If the maximum temperature limits are exceeded, the life of the module will be greatly reduced or the
module may be damaged. The temperature of the
spaceLED at the tc point in the thermally
stable state by means of a temperature sensor or temperature-sensitive sticker (available for example
from www.conrad.com, www.rs-components.com) as per EN60598-1.
For the precise position of the tc point see the above diagram.
➃ For colour temperatures and tolerances see page 7.
Data sheet 03/10-241-6  We reserve the right to make technical changes without prior notice.
voltage
V DC ➁
8
8
12
12
12
12
12
Notes:
•reversing the polarity may damage the
spaceLED!
•none of the components of the
spaceLED
(substrate, LED, electronic components etc.) may
be exposed to tensile or compressive stresses
•for further information on installation please refer
to the brochure entitled “
installation
instructions”
power
W➀
1.4
1.4
1.8
1.8
1.8
1.8
1.8
ta
°C
-25 → +55
-25 → +55
-25 → +55
-25 → +55
-25 → +55
-25 → +55
-25 → +55
tc point
°C ➂
75
75
75
75
75
75
75
dimensions
mm
82 x 46
82 x 46
82 x 46
82 x 46
82 x 46
82 x 46
82 x 46
packing
unit
50
50
50
50
50
50
50
spaceLED system
spaceLED system accessories
spaceLED Z101 / Z112 / Z121 / Z161 / Z131
spaceLED Z161
mounting plate
available as an option
T
spaceLED Z122
bridge 1 m
for connecting two lengths
of cable
spaceLED Z121
bridge 0.1 m
for connecting two lengths
of cable
U
spaceLED Z112
feeder 1 m
flexible feed line 1 m length
AS
E
spaceLED Z161
PH
Dimensions
D
O
spaceLED Z101
chain 10 m
pre-mounted with double
sided adhesive tape
RoHS
type
Z101
article number
88711762
Z112
Z121
Z122
Z161
Z131
88712073
88712119
88712125
88712147
88712067
description
chain, 10 m, 92 sockets
including protection set
spaceLED Z131
feeder, 1 m
bridge, 0.1 m
bridge, 1 m
mounting plate, available as an option
protection set
consists of 10 end caps and 10 contact covers
Data sheet 03/10-241-6  We reserve the right to make technical changes without prior notice.
packing unit
1
5
5
5
100
1
spaceLED Z131
protection set
ensure continuous protection
against moisture
spaceLED system
spaceLED mounting and safety instructions
T
Safety Instructions
•Only for voltages up to 42 V AC and 60 V DC (SELV-circuits)
•Do not exceed electrical current above 6 A
•Only to be driven with electrical protected supply
•System ends and unused slots to be covered with end caps
and blind plugs.
U
Fitting Instructions
•Mounting with prefixed adhesive tape. Mounting surface has to be dry
and free of dust and grease. Stick on at room temperature, maximum
agglomerating power will be reached after 2 h.
•Avoid putting the
spaceLED module out of horizontal positioning
during plug on and off to prevent break off of plug. Do not cant!
•Use a screw driver edgewise to plug off the
spaceLED modules.
AS
E
0 = IP54
D
O
Assembly
PH
Disassembly
Data sheet 03/10-241-6  We reserve the right to make technical changes without prior notice.
CLIX
spaceLED system
spaceLED
Corresponding colour temperature and CIE coordinates 3,000 K
warm white, 3,000 K
Cx
0.4309
0.4288
0.4421
0.4491
0.4510
0.4386
0,44
tolerance area
0,43
0,42
0,41
0,40
U
0,39
0,38
2500 K
0,37
3000 K
0,36
0,35
0,40
0,41
0,42
0,43
0,44
0,45
0,46
0,47
0,48
0,49
Cx
Cy
Corresponding colour temperature and CIE coordinates 4,200 K
0,41
O
3500 K
0,39
CIE coordinates: tolerance area
neutral white, 4,200 K
0,40
D
tolerance area
0,39
0,38
0,37
0,34
0,33
0,32
0,31
0,32
AS
E
0,36
0,35
Cy
0.3919
0.4006
0.4169
0.4141
0.4044
0.3893
T
Cy
0,45
CIE coordinates: tolerance area
Cx
0.3622
0.3599
0.3730
0.3794
0.3821
0.3690
Cy
0.3545
0.3621
0.3809
0.3791
0.3711
0.3523
3500 K
4000 K
4500 K
0,33
0,34
0,35
0,36
0,37
0,38
0,39
0,40
0,41
0,42
Cx
Corresponding colour temperature and CIE coordinates 6,500 K
Cy
0,38
daylight white, 6,500 K
6000 K
6500 K
tolerance area
PH
0,37
0,36
7000 K
0,35
0,34
0,33
0,32
0,31
0,30
0,29
0,28
0,25
0,26
0,27
0,28
0,29
0,30
0,31
CIE coordinates: tolerance area
0,32
0,33
0,34
0,35
Cx
Data sheet 03/10-241-6  We reserve the right to make technical changes without prior notice.
Cx
0.3074
0.3055
0.3141
0.3186
0.3205
0.3119
Cy
0.3175
0.3233
0.3378
0.3365
0.3308
0.3162