AWDM-030-1CH-VR
1ch LED Dimmer IR Controller +VR
AWDM-030-1CH-VR
1. AWDM-030-1CH-VR Dimmer Controller Interface:
IR Sensor
Power Input port
VR
1. IR Sensor：
LED strips output port
CHANNEL S.W
With IR remote controller，the distance is around
7m~10m.
2. Power Input Port:
3. LED output por:
12V or 24V DC(10.5~26.5V)
White = COM or V+
Black = GND
.
4. CHANNEL S.W:
5. VR Knob:
6. Built-in Buzzer:
signal.
.
Channel Switch
Adjusting the brightness of LED by Manual
. The buzzer will make sound when receiving
2. AWDM-030-1CH-VR connects to LED strips:
White Line = COM or V+
Black Line = GND
3. AWDM-030-1CH-VR connects to Power Supply
Input voltage:
DC 10.5V ~ 26.5V
4. AWDM-030-1CH-VR connects to Power supply and LED
strips
5. AWDM-030-1CH-VR connects to AWDM-030-R-1N-1O
Repeater
When power consumption of AWDM-030-1CH-VR is full and
need to link more LED strips, users could take a repeater
AWDM-030-R-1N-1O to link to the last LED strip.
AWDM-030-R-1N-1O is a 30W 1 input 1 output repeater,
If strips are more than 30W, users could add another repeater at
the last strips.
AWDM-030-R-1N-1O connects to LED strips
6. AWDM-030-1CH-VR connects to AWDM-060-R-1N-3O
When power consumption of AWDM-030-1CH-VR is full and
need to link more LED strips, users could take a repeater
AWDM-060-R-1N-3O to link to the last LED strip.
AWDM-060-R-1N-3O is a 60W 1 input 3 output repeater,
If strips are more than 60W, users could add another repeater at
the last strips.
AWDM-060-R-1N-3O connects to LED strips
7. IR receiver (IR Sensor):
1. built-in IR Sensor
2. External IR Sensor
There are 2 types of IR sensor; the external one is with 50cm
line.
8. DGL-IR1000 IR remote controller:
1. POWER:
POWER ON / OFF.
2. AUX:
No function
3. W:
No function
4. SPEED +:
D1,D2,D3
Dynamic mode faster
5. SPEED -:
D1,D2,D3
Dynamic mode slower
6. BRIGHTNESS+:
D1,D2,D3
Dynamic mode brighter
.S1,S2,S3
Static mode brighter
D1,D2,D3
Dynamic mode darker
.S1,S2,S3
Static mode darker
7. BRIGHTNESS-:
8. CTRL MODE:
IR controller mode/Manual(VR) mode switch
9. CHASE:
D1,D2,D3
Chasing and non-Chasing
10. S1:
Channel 1
Static mode
.S2:
Channel 2
Static mode
.S3:
Channel 3
Static mode
11. D1:
Channel 1
Dynamic mode
.D2:
Channel 2
Dynamic mode
.D3:
Channel 3
Dynamic mode
9. S1, D1, S2, D2 and S3, D3:
1. Remove the casing of AWDM-030-1CH-VR, there is a Channel
switch, Channel 1~3 correspond to S1, D1 ~S3, D3.
When CHANNEL S.W1 ON, we could control LED strips
by (S1 and D1)
When CHANNEL S.W2 ON, we could control LED strips
by (S2 and D2)
When CHANNEL S.W3 ON, we could control LED strips
by (S3 and D3)
2. S1、
、S2、
、S3 are constant light, we could adjust brightness by
BRIGHTNESS+ and BRIGHTNESSUnder CHANNEL S.W1 ON, press S1, LED strips will flash
once, we could press (BRIGHTNESS+ and BRIGHTNESS-) to
adjust the brightness
Under CHANNEL S.W2 ON, press S2, LED strips will flash
once, we could press (BRIGHTNESS+ and BRIGHTNESS-) to
adjust the brightness
Under CHANNEL S.W3 ON, press S3, LED strips will flash
once, we could press (BRIGHTNESS+ and BRIGHTNESS-) to
adjust the brightness
3. D1
1、D2
2、D3 are dynamic flash, we could press (SPEED+ and
SPEED-) to adjust the speed, press (BRIGHTNESS+ and
BRIGHTNESS-) to adjust brightness, press (CHASE) to switch
Chasing and Non-Chasing
Under CHANNEL S.W1 ON, press D1, LED strips will flash,
we could press (SPEED+ and SPEED-) to adjust the SPEED,
press (BRIGHTNESS+ and BRIGHTNESS-) to adjust the
brightness, press (CHASE) to switch Chasing and
Non-Chasing
Under CHANNEL S.W2 ON, press D2, LED strips will flash,
we could press (SPEED+ and SPEED-) to adjust the SPEED,
press (BRIGHTNESS+ and BRIGHTNESS-) to adjust the
brightness, press (CHASE) to switch Chasing and
Non-Chasing
Under CHANNEL S.W3 ON, press D3, LED strips will flash,
we could press (SPEED+ and SPEED-) to adjust the SPEED,
press (BRIGHTNESS+ and BRIGHTNESS-) to adjust the
brightness, press (CHASE) to switch Chasing and
Non-Chasing
10.
Control Mode Switch:
AWDM-030-1CH-VR could adjust brightness by VR knob
11.
Specification:
Model
AWDM-030-1CH-VR
Input Voltage
DC 10.5V ~ 26V
Output Power
DC 24V / 30W； DC 12V / 15W
LED type
Dimension
Weight
Operating
Temperature
Storage
Temperature
Fixed voltage with Fixed Current
Fixed Voltage with Limited Current
100mm x 45mm x 30mm ( L x W x H )
60g
0℃ ~ +50℃
-10℃ ~ +60℃