2 HP Model 200 JOB: Item No.: FOOD WASTE DISPOSER SPECIFICATIONS CORROSION RESISTANT BODY Permanent molded from heat treated aluminum alloy. EXTENDED LIP WATER SEAL Protects the motor from damage by water. TAPERED ROLLER BEARING Provides longer motor life, quiet operation and shock absorbing. WATER COOLED MOTOR Provides maximum efficiency and longer life. QUIET OPERATION Extra thick rubber mounting adaptor and drain outlet isolates sound and eliminates vibration. Cone Assembly TABLE CUT-OUT: 12” CONE - 12 7/8” 15” CONE - 15 7/8” 18” CONE - 18 7/8” ALL PIPING ½" OPTIONAL CONE COVER VACUUM BREAKER SOLENOID VALVE W/ WATER FLOW CONTROL ½" FIXED NEMA 4 Watertight Controls NOZZLE SCRAP RING DISPOSER CONTROL FOOD WASTE DISPOSER 2" DRAIN MSS MRSS NOTE: INSTALL PER ALL APPLICABLE CODES FULL LOAD AMPS ARSS-2 ARSS Optional Line Disconnect (LD) available on MSS, MRSS, & ARSS q q q q q q 115 Volts 1 Phase 24 Amps 208 Volts 1 Phase 12.1 Amps 230 Volts 1 Phase 12.0 Amps 208 Volts 3 Phase 6.6 Amps 230 Volts 3 Phase 6.0 Amps 460 Volts 3 Phase 3.0 Amps u SPECIFY EXACT OPERATING VOLTAGE u Salvajor Model 200 Food Waste Disposer 2 HP – 1 Phase & 3 Phase D E T A I L S A N D D I M SPECIFICATIONS: MOUNTING – Rubber adaptor above grind chamber and rubber drain outlet isolates sound and eliminates vibration. No metal to metal contact. EXTERIOR HOUSING – Permanent molded from heat treated, corrosion resistant aluminum alloy then computer machined to a smooth polished finish. Paint free. SHREDDER – 8 inch diameter, machined high strength, wear resistant hardened carbide alloy. E N water per minute. WASTE OUTLET – Rubber drain accepts 2” piping. DUAL DIRECTION GRINDING – Designed to operate in either direction. Direction of rotation can be controlled when installed with automatic reversing controls. Reversing rotation can double cutting teeth life. LEG SUPPORT (Optional) – Single leg, adjustable. ASSEMBLIES: (See Specification Sheet) CA – Cone Assembly with 12”, 15” or 18” Cone SA – Sink Assembly with 3 1⁄2” or 6 1⁄2” Sink Collar DISPOSER CONTROLS: (See Specification Sheet) MSS: (Non Reversing) MRSS: (Manual Reversing) ARSS-2: (Automatic Reversing) ARSS: (Automatic Reversing with Water Saver) S 15" CONE 17 7/8" (45.40) 18" (45.72) 15" (38.10) 55/8" (14.29) 61/2" (16.51) 1 /2" NPT WATER INLET 81/2" (21.64) 13" (33.02) 21 7/16" (54.48) 2" DRAIN 141/8" (35.93) 55/8" (14.32) POWER ENTRANCE RESET BUTTON 3 15 13/16" (40.19) 2" DRAIN 13" (33.02) 81/2" (21.52) 14 7/8" (37.78) 12" (30.48) 5 5/8" (14.29) 6 1/2" (16.51) 61/2" SINK MOUNT 31/2" SINK MOUNT 1 /2" NPT WATER INLET 81/2" (21.64) 5 5/8" (14.29) 6 1/2" (16.51) 12" CONE 81/2" (21.52) 3 1/2" (8.89) SINK OPENING WATER REQUIREMENT – 5 gallons of cold N 20 13/16" (52.89) MOTOR – 2 HP totally enclosed. Water cooled for efficiency and longer life. Built-in manual reset thermal overload protection. Available in 208 volts or 115/230 volts, 60 cycle, 1 phase and 208-230/460 volts, 60 cycle, 3 phase. SEAL – Extended Lip Water Seal. O /2" FIXED NOZZLE 1 high strength, wear resistant hardened carbide alloy. Sealed ball (bottom) I 18" CONE ROTOR – 8 inch diameter with 4 cutter bars, machined BEARINGS – Tapered roller (top) S /4" (1.91) 55/8" (14.32) 91/4" (23.54) POWER ENTRANCE RESET BUTTON 6 5/8" (16.83) CUTOUT ADJUSTABLE LEG (OPTIONAL) 93/16"(23.34) to 14 11/16"(37.29) NOTE: Dimensions in parenthesis are in centimeters (Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com SAMPLE SPECIFICATION (230/60/3) 200 - CA-18 MSS ModelCone Disposer Size Control Assembly Electrical Specs. u SPECIFY EXACT OPERATING VOLTAGE u The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com 4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: sales@salvajor.com service@salvajor.com Manufacturers of Commercial Food Waste Disposing Systems since 1944 Printed in USA Form No.S200 (03-16)