Explosion Proof Electrical Equipment
Ex Lighting
EVF
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURES
ATEX 94/9/EC
EXECUTION
CERTIFICATE REF.
RULES OF
COMPLIANCE
IEC Ex
INMETRO
II 2 G Ex d IIC T5/T4 Ex d IIC T5/T4 II 2 D Ex tD A21 T100°C/T135°C Ex tD A21 T100°C/T135°C
ISSeP 02 ATEX 043
EN 60079-0; EN 60079-1; EN 61241-1
GOST-R (RTR/RTN)
Ex d IIC T5/T4 1Ex d IIC T5 (T4) Ex tD A21 T100°C/T135°C Ex tD A21 T100°C (T135°C)
-
-
GOST-K
1Ex d IIC T5/T4 DIP A21 TA (100…135)°C
POCC IT. ME92.B02923
No. 07/43-269
ABNT NBR IEC 60079-0:2007IEC 60079-0 :2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0 /1/8/14-99 10; ABNT NBR IEC 60079IEC 60079-1 :2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
1:2007-04; ABNT NBR IEC
IEC 61242-31 :2008-11
ГОСТ Р МЭК 61241-1:2004
61242-31:2008-11
EMERGENCY UNIT
ATEX 94/9/EC
ESECUZIONE
CERTIFICATE REF.
RULES OF
COMPLIANCE
II 2 G Ex d IIC T6 II 2 D Ex d tD A21 T85°C
IEC Ex
INERIS 08 ATEX 018
EN 60079-0:2004; EN 60079-1:2006; EN 61241-0:2004;
EN 61241-1:2006 INMETRO
Ex d IIC T6 Ex d tD A21 T85°C
GOST-R (RTR/RTN)
Ex d IIC T6 Ex d tD A21 T85°C -
-
GOST-K
1Ex d IIC T6 Ex tD A21 T85°C
1Ex d IIC T6 DIP A21 TA 85°C
POCC IT. ME92.B02923
No. 07/43-269
ABNT NBR IEC 60079-0:2007IEC 60079-0:2011; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0 /1/8/14-99 10; ABNT NBR IEC 60079IEC 60079-1:2007; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
1:2007-04; ABNT NBR IEC
IEC 60079-3:2008
ГОСТ Р МЭК 61241-1:2004
61242-31:2008-11
* valid data for all execution
AMBIENT TEMP.
-20°C ÷ +60°C
-20°C ÷ +60°C
-20°C ÷ +60°C
PROT. DEGREE
IP66
IP66
IP66
-60°C ÷ +60°C -60°C ÷ +130°C IP66
IP66
Mechanical characteristics
Body
Tubes
painting
screws
gaskets
reflectors
cable entry
marine grade copper free aluminium (control gear & emergency unit)
high-temperature resistant borosylicate glass tube
external epoxy powders grey ral-9006 colour
external stainless steel
nbr rubber
white stove enamelled sheet steel
3/4” npt size threaded
Electrical characteristics for fluorescent tube lamps
power supply
lampholders
Terminals
elettronic ballast 110÷260V AC/DC 0/50/60 Hz (p.f.corrected - cos ρ ≥ 0,98)
bi-pin g13 cap
suitable up to 4sq/mm cables
emergency unit
emergency unit composed of inverter charger and Ni-Cd battery pack 4A/h 4.8v. autonomy 120min.
Led power-on indicating lamp provided
Electrical characteristics for LED lamps
power supply
lampholders
Terminals
elettronic ballast 90÷277Vac 50/60Hz (cos ρ ≥ 0,98)
bi-pin g13 cap
suitable up to 4sq/mm cables
On Request Accessories:
•Pole mounting kit complete with stainless steel hardware
•Ceiling mounting kit complete with stainless steel hardware
•Pendant mounting kit complete with stainless steel hardware
•Wall/Structure mounting kit complete with stainless steel hardware
•Galvanized steel wire protection guard
•Stainless steel wire protection guard
•Stainless steel reflectors
•External painting colour on request
•Electronic ballast with voltage supply different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 1
EVF
LIGHTING FIXTURES FOR
FLUORESCENT TUBE LAMPS AND LED
Ex Lighting
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE ENTRY
EMERGENCY
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE LAMPS - POWER SUPPLY 110V / 260V - AC/DC
EVF18EL
1 x 18W
EVF36EL
1 x 36W
EVF58EL
1 x 58W
T5
T4
T 100°C T 135°C G13
3 x 3/4”
-
-
A
T5
T4
T 100°C T 135°C
G13
3 x 3/4”
-
-
A
T5
T4
T 100°C T 135°C G13
3 x 3/4”
-
-
A
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR SINGLE LAMPS - POWER SUPPLY 230V / 240Vac
EVF18ELME
1 x 18W
EVF36ELME
1 x 36W
EVF58ELME
1 x 58W
T5
T4
T 100°C T 135°C
G13
3 x 3/4”
4.8 V - 4Ah
2h
B
T5
T4
T 100°C
T 135°C
G13
3 x 3/4”
4.8 V - 4Ah
2h
B
T5
T4
T 100°C T 135°C
G13
3 x 3/4”
4.8 V - 4Ah
2h
B
LED LIGHTING FIXTURES FOR SINGLE LAMP - POWER SUPPLY 90÷277Vac
LAMP
TEMPERATURE CLASS
(GAS)
EVF9L
1 x 9W
T6 T5 EVF20L
1 x 20W
EVF28L
1 x 28W
CODE
TEMPERATURE CLASS
(DUSTS)
illumination equivalent
level
to
[lm]
LAMPHOLDER
CABLE ENTRY
DETAIL
T 85°C T 100°C
G13
2 x 3/4"
1080
18W fluorescent
A
T6 T5 T 85°C T 100°C
G13
2 x 3/4"
2340
36W
fluorescent
A
T6 T5 T 85°C T 100°C
G13
2 x 3/4"
3240
58W fluorescent
A
EVF Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
EVF18EL
EVF9L
1000
96
95
602
4,50
3 x 3/4”
A
EVF36EL
EVF20L
1600
96
95
1202
5,70
3 x 3/4”
A
EVF58EL
EVF28L
1900
96
95
1490
7,00
3 x 3/4”
A
Reference details
A
A
8MA
D
8MA
3/4”
B
C
EVF
EVF Technical data
Since 1961
2 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting
CODE
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
EVF18ELME
1000
222
390
602
10,00
1 x 3/4"
B
EVF36ELME
1600
222
390
1202
12,00
1 x 3/4"
B
EVF58ELME
1900
222
390
1490
14,00
1 x 3/4"
B
Reference details
B
B
A
3/4”
C
D
EVF Installation and mounting details
Pendant mounting
type 2
45
170
156
type 1
Ceiling mounting
Wall/structure mounting
type 4
3/4”
8
12
50
type 3
Pole mounting
Assemblig detail with pole (typical)
273
50
100
45°
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 3
EVF
EVF Technical features
Ex Lighting
EVF Polar diagrams – photometric data
EVF18EL
EVF36EL
EVF58EL
cchio
AppaArepcpcahre
iocchio
Apparecchio
Rilievo
RilievRoilievo
Rilievo
ApLpaam
repcacdhaio
ApLpaaA
m
reppL
cpac
io
ApLpaam
repcacdhaio
Rilievo
RilievRoilievo
Rilievo
ApLpaam
repcacdhaio
ApLpaaA
m
reppL
cpac
io
ApLpaam
repcacdhaio
Rilievo
RilievRoilievo
Rilievo
Lampada
LampLaadmapada
Lampada
aadh
m
rae
pcacdhaio
aadh
m
rae
pcacdhaio
EVFF-18 CodicCeodiE
CodicCeod
FiE
A2F2EA22
Codice FEA22CoC
diocdeiceEVFF-L3168C
/2o0C
diocC
deo
icC
8F
/2-L03168C
diocdeiceEVFF-L3168/2C0odice FEA24
CodicCeod
FiE
A2F4EA24
Codice FEA24CoC
diocdeiceEVFF-L5386C
/2o0C
diocC
deo
icC
6F
/2-L05386C
diocdeiceEVFF-L5386/2C0odice FEA26
CodicCeod
FiE
A2F6EA26
Codice FEA26 Codice
L58/20CodicCeodice L58/2L058/20Codice
ceVFFE-1
V8FF-18 Codice EVFF-18 Codice FEA22
ce
deioE
cdeVicFeFE-L3
V16F
/2o0C
ce
deioE
cdeVicFeFE-L5
V38F
/2o0C
ce
EVFF 1x1N8oW
meNomE
me
EVFF 1x18NW
ome EVFF118 NoRmilieN
EV
8F118 Nome EVFF1N1o8N
muemeroELVaFmFp1a1dxa3N6oW
N
mueN
moeN
ru
oE
VeFrFoE11
W
N
muemeroEVFF 11x36NW
ome EVFF136 NoRmilieN
EV
6F136 Nome EVFF1N3o6N
muemeroELVaFmFp1a1dxa5N8oW
N
mueN
moeN
ru
oE
VeFrFoE11
W
N
muemeroEVFF11x58NW
ome EVFF158 NoRmilieN
EV
8F158 Nome EVFF158Numero Lamp1ada NumeNru
omero1
Numero
A
pF
a8rW
ecxc1N
h8io
oW
evoom
A
pF
a6r1
ecxc3N
h6io
oW
evoom
A
pF
a8r1
ecxc5N
h8io
oW
evoom
eVFFE1
VxpF1
1
eFFE1V1F
m
em
VxpF3
1
eFFE1V3F
m
em
VxpF5
1
eFFE1V5F
1
ice E
2-2-01004-2004Data
icS
e TD
8iA
dF
icS
e TD
E
4-2-01004-2004Data
icS
e TD
6iA
dF
icS
e TD
E
6-2-01004-2004Data
e TD LP
5o
8/s2i0zP
EVFF
ArchiA
virochE
AVrFcFh-i1v8io EVFF
Data 22-10-2004DaCtaodDicaet2aF2E-A1202
22-10-A2r0cP
0ho
4ivsiiozioE
nCe
VoFdF
ArLcP1ho
v/s2iir0ozcPihooE
V
AVrFcPFho-i3vs6iiozioE
ne
VFF STDData 22-10-2004DaCtaodDicaet2aF2E-A1202
22-10-A2r0cP
0ho
4ivsiiozioE
nCe
VoFdF
ArLcP3ho
v/s2iir0ozcPihooE
V
AVrFcPFho-i5vs8iiozioE
ne
VFFSTDData 22-10-2004DaCtaodDicaet2aF2E-A1202
22-10-20P
0o
4sizionCeodicS
ioonseizionSeTD STD Posizione
ivV
ioFFEC
VoFdF
invse
iiozFioFE
nSC
e
VToFD
invse
iiozFioFE
nSC
e
VToFD
Nome
EVFF 1x18W
Archivio EVFF
Rend8R
i6me
.9en2nd%
tio
mento
EVF
ento
Nome EVFF118
Data 22-10-2004
8R
6e
.9n2d8%
i6m.9e2n%
to
Rendimento
Sist8e6m
.9a2C
%oordinateSistC
em
-G
ooardCin
-G
istC
em
uismseoCnT
-tG
ootale
S
iastC
em
oa
otredinaC
teS
-Ga CoordRineaFntlde
86.92%
Sistema Coordinate
aroeccVhaiolo1r7V
li/ekvlm
o PosC
MA
aspspim
e7aM
.l0oa0rsecsM
dim
/a
kolsm
d.0/a
k0lsm
iz7io.0n0eRcid
izP
=ioo
0ns.0
eiz0ioGn=e0.00
simo 17V7a.l0o10r7ec7M
csdim
/kolm Po1s7
Valore Massimo
177.00 cd/klm
Codice EVFF-18
Codice FEAP2o2sizione
Nome
EVFF 1x18W
Nome EVFF118
Archivio EVFF 1000mm x 98mm 1000mm
Data x 98mm
22-10-2004
x 98mm1000mm
x1000mm
98mm
1000mm
x 98mm
Rendimento
Valore Massimo
86.92%
90
177.00 cd/klm
90
90
Numero
Posizione
Sistema Coordinate
90
Posizione
90
C-G
180
0
180
180 180
90
C-G
90.0
90.0
270.0
90.0
180
180
0.0
90.0
270 270
R 8.00
90
90
105
90
Angoli Gamma
180
90
75
50
50
180
180
50
50
50
50
90
90
75
90
90105
100
75
105
105 120 Angoli
105 Gamma
105 105
105
105
50
90
105
180.0
9090
50
50
75
7590
7575
60
105
50
100
200
100
100
45
45
45
LITESTAR 8.00
15
150
45
(c)OxyTech Srl www.oxytech.it
90
150
60
6060
50
105
50 180
180
15
150
30
30
30 15
30 15
150
200 200
CODE
250 250
150
180
75
45
45
50
50
50
105
90
90
75
90
50
75
105
105 120 Angoli
105 Gamma
105 105
105
105
50
90
100
60
30
45
4545 45
PLaIT
giEnS
a T1AR 8.00
15
45
50
015
015
cd/klm
90105
180.0
30
15 30
cd/klm
250
30
100
(c)OxyTech Srl www.oxytech.it
50
50
75
7590
270.0
180
120
105
40
105
40 180
180
9090
7575
100
200
0
30
30 15
30 15
100
100
90
90
15
75
60
60
150
30
45
www.feam-ex.com
150
200 200
200
250
200
250 250
250
DESCRIPTION
150
105 120
75
40
75
105 105
75
90
80
75
120 120
105
90
40
40
40
90
105
90
90
90
75
75
60
60
45
45
60
40
40
40
80
80
75
45
75
60
6060
45
60
60
80
60
40
cd/klm
150 150
200
150
120
40
60
90 75
40
180
180
120
015
015
250
30
60
45
45
4545 45
PLaIT
giEnS
a T1AR 8.00
cd/klm
15
45
120
80
45
(c)OxyTech Srl www.oxytech.it
0
75
60
cd/klm
120 120
15
120
30
60
45
www.feam-ex.com
160
120
160 160
160
200
160
200 200
200
Pagina 1
45
45
cd/klm
cd/klm
15 30
80
160
200
60
45
cd/klm
30
0.0
270
75
10590
60
45
cd/klm
cd/klm
15 30
150
45
200
250
30
15 30
30
cd/klm
cd/klm
30
30
30 15
30 15
150
150
015
015
cd/klm
cd/klm
cd/klm
15 30
15 30
GABBIAEVFF18
(c)OxyTech Srl www.oxytech.it
MATERIAL
GALVANIZED STEEL
GABBIAEVFF36
18W SIZE GALVANIZED STEEL WIRE PROTECTION GUARD
www.feam-ex.com
LITESTAR 8.00
(c)OxyTech P
Sa
rlgiw
nw
aw
1.oxytech.it
www.feam-ex.com
36W SIZE GALVANIZED STEEL WIRE PROTECTION GUARD
LITESTAR 8.00
(c)OxyTech P
Sa
rlgiw
nw
aw
1.oxytech.it
Pagina 1
www.feam-ex.com
GALVANIZED STEEL
GABBIAEVFF58
58W SIZE GALVANIZED STEEL WIRE PROTECTION GUARD
GALVANIZED STEEL
GABBIAEVFF18IX
18W SIZE STAINLESS STEEL WIRE PROTECTION GUARD
STAINLESS STEEL
GABBIAEVFF36IX
36W SIZE STAINLESS STEEL WIRE PROTECTION GUARD
STAINLESS STEEL
GABBIAEVFF58IX
58W SIZE STAINLESS STEEL WIRE PROTECTION GUARD
STAINLESS STEEL
D18IX
18W SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
D36IX
36W SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
D58IX
58W SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20301.0151
SINGLE LAMP CEILING MOUNTING KIT C/W HARDWARE
TYPE 2
ALUM. LIGHT ALLOY
20301.0153
SINGLE LAMP POLE MOUNTING KIT (SIZE 1” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0155
SINGLE LAMP POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0157
SINGLE LAMP POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20302.0128
SINGLE LAMP WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
20301.0103
SINGLE LAMP PENDANT MOUNTING KIT C/W HARDWARE
TYPE 1
GALVANIZED STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
4 - Feam Catalogue 03
cd/kl
30
30
cd/klm
200
INSTALLATION
LI(T
c)EOS
TER
eScT
8h.A0SR
0rl 8w
c).O
oLxI(yT
eO
ecSch
tSR
.0Sw
0rw
ow
x(yw
ct)e.O
teecchh.itSrl ww
ww
ww
.o.xfeyatemc-he.xit.com www.w
fewaw
m.-fea
x.m
co-emx.cL
TE
wSwTwA.fRea8m
.0-0ex.cL
oI(m
T
c)EOS
TER
eScT
8h.A0P
SR
0a
rlg8iw
a0(w
c1).O
oLxI(yT
eO
ecSch
tP
SR
rclg8hiw
.n0P
a0a
o
xa(yw
c1t)e.O
teecchh.itP
Sa
rlgiw
nw
w
aw
w
1w
.o.xfeyatemc-he.xit.com www.w
fewaw
m.-fea
x.m
co-emx.cL
TE
wSwTwA.fRea8m
.0-0ex.cL
oI(m
T
c)EOS
TER
eScT
8h.A0P
SR
0a
rlg8iw
a0(w
c1).O
oLxI(yT
eO
ecSch
tP
SR
rclg8hiw
.n0P
a0a
o
xa(yw
c1t)e.O
teecchh.itP
Sa
rlgiw
nw
w
aw
w
1w
.o.xfeyatemc-he.xit.com www.w
fewaw
m.-fea
x.m
co-emx.com www.feam-ex.com
LxT
IyTA
.0w
0(w
ctT)E
xThy.iA
T
ercl 8hw
l .w
ocxhy.itT
oIm
LxT
IyTA
.n0w
ctT)E
xThy.iA
T
ea
Sw
rw
l1g.iw
nw
ocxhy.itT
oIm
LxT
IyTA
.n0w
ctT)E
xThy.iA
T
ea
Sw
rw
l1g.iw
nw
ocxhy.itT
30
15
0
15
30
30
15
0
15
30
30
15
0
15
30
ITESTAR 8.00
270.0
Semipiani C
Gamma
Angle
Angoli
Gamma
45
60
60
60
0.0
270.0
90.0
270.0
C Halfplanes
120 Angoli Gamma120 Angoli
Gamma
180
120 Angoli
Gamma120 Angoli Gamma
250
60
45
200
50
180
cd/klm
150 150
90.0
270.0
90.0
0
180
270 270
0
120
45
75
90.0
90.0
100
EVF On request accessories
250
30
0
www.feam-ex.com
200
45
100
75
60
60
250
30
60
0
0
4600.00 lm
Flus0.0
so Totale
4600.00 lm
180.0
0.0180.0
0.0180.0
0.0
Dop270.0
pia Simmetria
180.0
180.0
C=0.00 G=0.00
270
50
75
45
100
60
60
C-G
270.0
270
1
STD
4F
60
lu0s.s0Fo0luTlm
ale
s.s0o0 Tlm
otale
sosto
Totale4600.40F
60l0ul0m
Flusso Totale
p
CP
=o
0s.0C
iz0=
ioG
a =S0Lim
.a0m
0e
Gtar=ida
0a.0D0oppD
iaoS
im
ria
0n.=e
00.0G0=0.0D0oppiC
pp
iamSeitm
metria Doppia Simm
C=0.00 G=0.00
DC
oo
ppdiaicS
eimmetriaL58/20
Numero
1
PCSemipiani
osiziSemipiani
one C STD
Semipiani Semipiani
C
Semipiani C
C
90.0
150
45
75
1900mm x 98mm
180
0
0
180 180
90
180
60
90 75
Sistema Coordinate
90
Posizione
90
180
0.0
180
150
60
90 90
0.0
C-G
270
90
60
Sistema Coordinate
270.0
270
75
10590
Numero
Posizione
S
2i8s5t6e00m
..00a02C
%
lmoordinateSistC
em
-G
ooardCin
-G
istC
em
ussoCT
-G
otale
S
iastC
em
oa
otredinaC
teS
-Ga CoordinaFtle
60.02%
270.0
90.0
270.0
Semipiani C
120 Angoli Gamma120 Angoli
Gamma
180
120 Angoli
Gamma120 Angoli Gamma
50
75
90.0
270.0
90.0
C Halfplanes
Gamma
Angle
Angoli Gamma
120
50 180
180
60
75
90.0
0
180
270 270
0
2850.00 lm Rendimento
ReFnlduis0.0
mseonTtootale
285600..0002%
lm
90
180.0
0.0180.0
0.0180.0
0.0
VaD
loorep270.0
pMiaasSsim
imm
oetria 124.00 cd/klm
180.0
180.0
C=0.00 G=0.00
90.0
180
105
90
C-G
90.0
0
Nome EVFF158
Data 22-10-2004
R2eF
8n5
ld6uR
0i0sm
.e
.s00F
en
o02n
%
ltim
osteo
anle
00.2e
.00F
l0i0
m
sm
ootale
lduT
so
m
Ttootale2856R
8n02l5d6u%
..s00eo02nT
%
ltm
Flusso Totale
270
270
180
75
90
0
Nome
EVFF 1x58W
Archivio EVFF
270
Angoli
Gamma
Angoli
Gamma
105
Angoli
105 Gamma
105
105
180
1
STD
p0
p
ctac
li/ekvlm
o PosC
CP
=o
0s.0C
iz0=
ioG
lo0oreppMiC
aA
a=sS
sLipm
i.a
m
0am
0roee
G
r=id
Vh
a
0ai.o
0D
lo0
1or2V
ep4apM
.D
0rse
S
iM
d
m
im
/a
km
olsSm
esitm
ia
l0o1o
0r2epc4pM
d.i0a
/a
k0lsSm
m
im
olm
etriaPo1s2
iz4io.0n0eRcid
izP
=ioo
0ns.0
eiz0ioGn=e0.00
0n.=e
00.0G0=V0a.0D
li0oaao
pcsp
ia
irm
m
oet1r2
iVa4a.D
csid
/km
C=0.00 G=0.00
pcpd
mm
ria-L5386/20
Valore Massimo
124.00 cd/klm
CoDC
doio
eiaicSeiE
VeFtF
Codice FEAP2o6sizione
NoN
muemeroEVFF11x58W
Nome EVFF158
ArcPCSemipiani
hoivsiioziSemipiani
oE
ne
VFC
FS1900mm
TD
Data x 98mm
22-10-2004
x 98mm1900mm
xSemipiani
98mm 1900mm
x1900mm
98mm
Semipiani Semipiani
C
C 1900mm
x 98mm
C
0
180 180
270
Angoli Gamma
Sistema Coordinate
90
Posizione
90
C-G
270.0
270
Gamma
Angoli Angle
Gamma
Sistema Coordinate
270.0
1600mm x 98mm
0
C Halfplanes
180.0
90 90
0.0
Numero
Posizione
S
1i1s5t8e01m
..07a03C
%
lmoordinateSistC
em
-G
ooardCin
-G
istC
em
uismseoCnT
-tG
ootale
S
iastC
em
oa
otredinaC
teS
-Ga CoordRineaFntlde
81.73%
270.0
90.0
270.0
Semipiani C
0
180
0
1150.00 lm Rendimento
ReFnlduis0.0
mseonTtootale
115801..0703%
lm
90
180.0
0.0180.0
0.0180.0
0.0
VaD
loorep270.0
pMiaasSsim
imm
oetria 168.00 cd/klm
180.0
180.0
C=0.00 G=0.00
270
270
Nome EVFF136
Data 22-10-2004
R1eF
1n5
ld8uR
0i1sm
.e
.s07F
en
o03n
%
ltim
osteo
anle
01.1e
.07F
l0i1
m
s..s07eo03nT
ootale
lduT
so
m
Ttootale1158R
1n03l5d8u%
%
ltm
Flusso Totale
90.0
0
Nome
EVFF 1x36W
Archivio EVFF
p0
p
ctac
li/ekvlm
o PosC
CP
=o
0s.0C
iz0=
ioG
lo0oreppMiC
aA
a=sS
sLipm
i.a
m
0am
0roee
G
r=id
Vh
a
0ai.o
0D
lo0
1or6V
ep8apM
.D
0rse
S
iM
d
m
im
/a
km
olsS
m
esitm
ia
l0o1o
0r6epc8pM
d.i0a
/a
k0lsSm
m
im
olm
etriaPo1s6
iz8io.0n0eRcid
izP
=ioo
0ns.0
eiz0ioGn=e0.00
0n.=e
00.0G0=V0a.0D
li0oaao
pcsp
ia
irm
m
oet1r6
iVa8a.D
csid
/km
C=0.00 G=0.00
pcpd
mm
ria-L3168/20
Valore Massimo
168.00 cd/klm
CoDC
doio
eiaicSeiE
VeFtF
Codice FEAP2o4sizione
NoN
muemeroEVFF 11x36W
Nome EVFF136
ArcPCSemipiani
hoivsiioziSemipiani
oE
ne
VFC
F S1600mm
TD
Data x 98mm
22-10-2004
x 98mm1600mm
xSemipiani
98mm 1600mm
x1600mm
98mm
Semipiani Semipiani
C
C 1600mm
x 98mm
C
0
1000mm x098mm
1
STD
YOUR PARTNER FOR SAFETY
PaginPaa1g
Pagina 1
Explosion Proof Electrical Equipment
Ex Lighting
EVFG
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
ATEX 94/9/EC
EXECUTION
installation
IEC Ex
LIGHTING FIXTURES
INMETRO
II 2 G Ex d IIC T6 Gb II 2 G Ex d IIC T6 Gb II 2 G Ex de IIC T6 Gb II 2 G Ex de IIC T6 Gb II 2 G Ex tb IIIC T85°C Db
II 2 G Ex tb IIIC T85°C Db
GOST-R (RTR/RTN)
Ex d IIC T6 Gb Ex de IIC T6 Gb Ex tb IIIC T85°C Db 1Ex d IIC T6 1Ex de IIC T6 DIP A21 TA (85)°C
GOST-K
1Ex d IIC T6 1Ex de IIC T6 DIP A21 TA (85)°C
ZONE 1/2 - ZONE 21/22
ZONE 1/2 - ZONE 21/22
ZONE 1/2 - ZONE 21/22
ZONE 1/2 - ZONE 21/22
ZONE 1/2 - ZONE 21/22
PROTEC. DEGREE
IP66
IP66
IP66
IP66
IP66
CERTIFICATE REF.
INERIS 12 ATEX 0023X
-
-
-
-
RULES OF
COMPLIANCE
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
IEC 60079-0:2007-10; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0 /1/8/14-99 IEC 60079-1:2007-04; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 61242-31:2008-11 ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004
Mechanical characteristics
Body
Tubes
Painting
Screws
Gaskets
Reflectors
Cable entry
marine grade copper free aluminium
high-temperature resistant borosylicate glass tube
external epoxy powders grey ral-9006 colour
external stainless steel
Nbr rubber
white stove enamelled sheet steel
3/4” npt size threaded
Electrical characteristics for fluorescent tube lamps
Power Supply
Lampholders
Internal Wiring
Terminals
Emergency Unit
Elettronic ballast 110V/260V - 0/50/60Hz (P.F.Corrected - Cos Ρ ≥ 0,98)
Bi-Pin G13 Cap
105° C resistant silicon rubber insulation cables
Suitable up to 4sq/mm cables
Emergency unit with autonomy from 120 Min.
Electrical characteristics for LED lamps
Power Supply
Lampholders
Internal Wiring
Terminals
Elettronic ballast 90÷277vac 50/60hz (cos ρ ≥ 0,98)
Bi-Pin G13 Cap
105° C resistant silicon rubber insulation cables
Suitable up to 4sq/mm cables
On Request Accessories:
• Pole mounting kit complete with stainless steel hardware
• Ceiling mounting kit complete with stainless steel hardware
• Pendant mounting kit complete with stainless steel hardware
• Wall/Structure mounting kit complete with stainless steel hardware
• External painting colour on request
• Electronic ballast with voltage supply different than standard
•3h autonomy battery pack
•protection guard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 5
EVFG
LIGHTING FIXTURES FOR
FLUORESCENT TUBE LAMPS AND LED
Ex Lighting
CODE
LAMP
EVFG208
EVFG208-DE
EVFG218
EVFG218-DE
EVFG236
EVFG236-DE
EVFG258
EVFG258-DE
2 x 8W
2 x 8W
2 x 18W
2 x 18W
2 x 36W
2 x 36W
2 x 58W
2 x 58W
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE ENTRY
EMERGENCY
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR TWIN LAMPS - POWER SUPPLY 110V / 260V - AC/DC
EVFGE208
EVFGE208-DE
EVFGE218
EVFGE218-DE
EVFGE236
EVFGE236-DE
EVFGE258
EVFGE258-DE
T6 T6 T6 T6 T6 T6 T6 T6 T 85°C
T 85°C
T 85°C
T 85°C
T 85°C
T 85°C
T 85°C
T 85°C
G5
G5
G13
G13
G13
G13
G13
G13
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
-
-
A
B
A
B
A
B
A
B
120 min.
120 min.
120 min.
120 min.
120 min.
120 min.
120 min.
120 min.
A
B
A
B
A
B
A
B
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR TWIN LAMPS - POWER SUPPLY 230V / 240Vac
2 x 8W
2 x 8W
2 x 18W
2 x 18W
2 x 36W
2 x 36W
2 x 58W
2 x 58W
T6 T6 T6 T6 T6 T6 T6 T6 T 85°C
T 85°C
T 85°C
T 85°C
T 85°C
T 85°C
T 85°C
T 85°C
G5
G13
G13
G13
G13
G13
G13
G13
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
4.8 V - 4Ah
4.8 V - 4Ah
4.8 V - 4Ah
4.8 V - 4Ah
4.8 V - 4Ah
4.8 V - 4Ah
4.8 V - 4Ah
4.8 V - 4Ah
LED LIGHTING FIXTURES FOR TWIN LAMP - POWER SUPPLY 90÷277Vac
CODE
EVFG9L
EVFG9L-DE
EVFG20L
EVFG20L-DE
EVFG28L
EVFG28L-DE
LAMP
2 x 9W
2 x 9W
2 x 20W
2 x 20W
2 x 28W
2 x 28W
TEMPERATURE CLASS
(GAS)
T6 T6 T6 T6 T6 T6 TEMPERATURE CLASS
(DUSTS)
T 85°C T 85°C T 85°C T 85°C T 85°C T 85°C LAMPHOLDER
CABLE ENTRY
G13
G13
G13
G13
G13
G13
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
illumination equivalent
DETAIL
to
level [lm]
2160
A
2 x 18W fluorescent
2160
B
4680
A
2 x 36W fluorescent
4680
B
6480
A
2 x 58W fluorescent
6480
B
EVFG Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
ØE [mm]
EVFG208
EVFG208-DE
EVFG218
EVFG218-DE
EVFG236
EVFG236-DE
EVFG258
EVFG258-DE
EVFGE208
EVFGE208-DE
EVFGE218
EVFGE218-DE
EVFGE236
EVFGE236-DE
EVFGE258
EVFGE258-DE
EVFG9L
EVFG9L-DE
EVFG20L
EVFG20L-DE
EVFG28L
EVFG28L-DE
350
350
743
743
1343
1343
1643
1643
350
350
743
743
1343
1343
1643
1643
350
350
743
743
1343
1343
247
247
640
640
1240
1240
1540
1540
247
247
640
640
1240
1240
1540
1540
247
247
640
640
1240
1240
155
210
155
210
155
210
155
210
155
210
155
210
155
210
155
210
155
210
155
210
155
210
145
145
145
145
145
145
145
145
145
145
145
145
145
145
145
145
145
145
145
145
145
145
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
A
WEIGHT [Kg] CABLE ENTRY
3,50
4,00
6,20
6,70
8,20
8,70
10,20
10,70
3,50
4,00
6,20
6,70
8,20
8,70
10,20
10,70
3,50
4,00
6,20
6,70
8,20
8,70
DETAIL
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
2 x 3/4"
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
M8
D
3/4” NPT
3/4” NPT
C
M8
ØE
EVFG
EVFG Technical data
3/4” NPT
Since 1961
6 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting
EVFG Technical features
B
B
D
M8
C
M8
EVFG
A
ØE
2x3/4” NPT
EVFG Installation and mounting details
Pendant mounting
type 1
Ceiling mounting
type 2
3/4” NPT
3/4” NPT
3/4” NPT
170
190
3/4” NPT
Wall/structure mounting
type 3
type 4
Pole mounting
Assemblig detail with pole (typical)
NPS2
EEx-d
IIC
IP66
II 2
INERIS GD
04ATEX9005U
EEx-d
IIC
IP66
II 2
INERIS GD
04ATEX9005U
0
16
3/4” NPT
50
NPS2
45°
Ex de
50
100
3/4” NPT
Ex d
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 7
Ex Lighting
EVFG Polar diagrams – photometric data
EVFG
EVFG218
EVFG236
EVFG258
EVFG On request accessories
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20302.0103 CEILING MOUNTING KIT C/W HARDWARE
TYPE 2
ALUMINIUM LIGHT ALLOY
20301.0162 POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0163 POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20302.0128 WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
20302.0121 PENDANT MOUNTING KIT C/W HARDWARE
TYPE 1
GALVANIZED STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
8 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
LIGHTING FIXTURES
FOR INCANDESCENT AND
DISCHARGE LAMPS
Explosion Proof Electrical Equipment
EVAC
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE / CONTROL GEAR
ATEX 94/9/EC
EXECUTION
IEC Ex
II 2 G Ex d IIC T6÷T3 Gb Ex d IIC T6÷T3 Gb 2 D Ex tb IIIC T85°C-T200°C Db Ex tb IIIC T85°C-T200°C Db
INMETRO
GOST-R (RTR/RTN)
Ex d IIC T6÷T3 Gb Ex tb IIIC T85°C-T200°C Db
1Ex d IIC T6÷T3 X DIP A21 TA (T85°C-T200°C)
GOST-K
1Ex d IIC T6÷T3 X DIP A21 TA (T85°C-T200°C)
AMBIENT
TEMPERATURE
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
PROTECTION
DEGREE
IP66
IP66
IP66
IP66
IP66
INERIS 01 ATEX 0054X
-
-
POCC IT. ME92.B02923
No. 07/43-269
CERTIFICATE REF.
RULES OF
COMPLIANCE
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004;
Mechanical characteristics
Body
marine grade copper free aluminium (control gear & lamp body)
Globe
high-temperature resistant borosylicate glass
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
cable entry
3/4” npt size threaded
Installation swivel bracket AISI 316L stainless steel
Electrical characteristics
Power supply (prc)
conventional ballast 230V - 50Hz (p.f. corrected - cos ρ ≥ 0,95)
Lampholders
porcelain E27/E40 size
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4sq/mm cables
On Request Accessories:
• Ceiling mounting AISI 316L stainless steel kit complete with stainless steel hardware
• Pendant mounting AISI 316L stainless steel kit complete with stainless steel hardware
• Pole mounting kit 1” – 1 1/2” – 2” dia. complete with stainless steel hardware
• Wall/Structure mounting kit complete with stainless steel hardware
• Galvanized steel wire protection guard
• Stainless steel wire protection guard
• White stove enamelled aluminium reflectors
• Stainless steel reflectors
• External painting colour on request
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
• Lighting fixtures in execution Ex de
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 9
EVAC
Ex Lighting
Ex Lighting
EVAC
EVAC Technical data
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY SIZE
DETAIL
LIGHTING FIXTURE FOR INCANDESCENT LAMP - POWER SUPPLY 230V-50Hz
EVAC101
100 W
EVAC100
100 W
EVAC201
T4 T 130°C
E-27
1 x 3/4"
A
T4 T 130°C
E-27
2 x 3/4"
B
200 W
T4 T3 T 130°C T 195°C
E-27
1 x 3/4"
A
EVAC200
200 W
T4 T3 T 130°C T 195°C E-27
2 x 3/4"
B
EVAC301
300 W
T4 T3
T 130°C T 195°C E-40
1 x 3/4"
A
EVAC300
300 W
T4 T3 T 130°C T 195°C E-40
2 x 3/4"
B
EVAC501
500 W
T3
T 195°C
E-40
1 x 3/4"
A
EVAC500
500 W
T3 T 195°C
E-40
2 x 3/4"
B
1 x 3/4"
A
LIGHTING FIXTURE FOR HALOGEN LAMP - POWER SUPPLY 230V-50Hz
EVAC101-100H
100 W
T4 T 130°C
E-27
EVAC100-100H
100 W
T4 T 130°C
E-27
2 x 3/4"
B
EVAC201-150H
150 W
T4
T 130°C
E-27
1 x 3/4"
A
EVAC200-150H
150 W
T4
T 130°C
E-27
2 x 3/4"
B
EVAC301-250H
250 W
T4 T3 T 130°C T 195°C
E-27
1 x 3/4"
A
EVAC300-250H
250 W
T4 T3 T 130°C T 195°C
E-27
2 x 3/4"
B
LIGHTING FIXTURE FOR HIGH PRESSURE MERCURY VAPOUR LAMP - POWER SUPPLY 230V-50Hz
EVAC101-80HG
80 W
T4 T 130°C
E-27
2 x 3/4”
C
EVAC201-125HG
125 W
T3
T 195°C
E-27
2 x 3/4”
C
EVAC301-250HG
250 W
T3 T 195°C
E-40
2 x 3/4”
C
EVAC501-250HG
250 W
T4 T 130°C
E-40
2 x 3/4”
C
EVAC501-400HG
400 W
T3 T 195°C
E-40
2 x 3/4”
C
LIGHTING FIXTURE FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V-50Hz
EVAC101-70HPNA
70 W
T4
T 130°C
E-27
2 x 3/4"
C
EVAC301-150HPNA
150 W
T4 T 130°C
E-40
2 x 3/4"
C
EVAC301-250HPNA
250 W
T3 T2 T 195°C T 290°C
E-40
2 x 3/4"
C
EVAC501-400HPNA
400 W
T3 T 195°C
E-40
2 x 3/4"
C
LIGHTING FIXTURE FOR METAL HALIDE LAMP - POWER SUPPLY 230V-50Hz
EVAC101-100MH
100 W
T4 T 130°C
E-27
2 x 3/4"
C
EVAC301-150MH
150 W
T4 T3 T 130°C T 195°C
E-27
2 x 3/4"
C
EVAC301-250MH
250 W
T3 T 195°C
E-40
2 x 3/4"
C
EVAC501-400MH
400 W
T3
T 195°C
E-40
2 x 3/4"
C
LIGHTING FIXTURE FOR BLENDED LIGHT LAMP - POWER SUPPLY 230V-50Hz
EVAC201-160MLL
160 W
T3 T 195°C
E-27
1 x 3/4"
A
EVAC200-160MLL
160 W
T3 T 195°C
E-27
2 x 3/4"
B
EVAC301-250MLL
250 W
T3 T 195°C
E-40
1 x 3/4"
A
EVAC300-250MLL
250 W
T3
T 195°C
E-40
2 x 3/4"
B
Since 1961
10 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting
A [mm]
B [mm]
C [mm]
Ø D [mm]
Ø E [mm]
weight [Kg]
CABLE ENTRY
DETAIL
EVAC101
CODE
150
270
240
145
280
3,50
1 x 3/4”
A
EVAC100
150
270
240
145
280
3,50
2 x 3/4”
B
EVAC201
175
290
270
170
345
4,00
1 x 3/4”
A
EVAC200
175
290
270
170
345
4,00
2 x 3/4”
B
EVAC301
200
390
330
190
402
7,00
1 x 3/4”
A
EVAC300
200
390
330
190
402
7,00
2 x 3/4”
B
EVAC501
260
420
395
255
515
10,00
1 x 3/4”
A
EVAC500
260
420
395
255
515
10,00
2 x 3/4”
B
Reference details
Reference details
A
B
ØA
3/4”
ØA
2X3/4”
C
Ø8
.5
60
B
80
60
3
C
80
60
16
B
200
180
ØD
ØE
CODE
A [mm]
ØD
ØE
B [mm]
C [mm]
Ø D [mm]
Ø E [mm]
weight [Kg]
CABLE ENTRY
DETAIL
545
515
145
280
C
9,00
”
2 x 3/4”
EVAC201-..HG
225
565
545
170
345
9,50
EVAC301-..HG 2 x 3/4”
C
EVAC301-..HPNA 225
2 x 3/4”
C
2 x 3/4”
C
EVAC101-..HG EVAC101-..HPNA 225
EVAC101-..MH
EVAC301-..MH
665
640
190
402
12,00
695
670
255
515
15,50
”
EVAC501-..HG EVAC501-..HPNA 225
EVAC501-..MH
Reference details
C
A
C
B
5
200
3/4” NPT
3/4” NPT
ØD
ØE
192
28 28
0
Ø1
30
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 11
EVAC
EVAC Technical features
Ex Lighting
EVAC Installation and mounting details
3/4” NPT
3/4” NPT
3/4” NPT
271
3/4” NPT
16
type 1
Pendant mounting
type 2
3/4” NPT
310
3/4” NPT
54
180
3/4” NPT
3/4” NPT
Wall/structure mounting
type 3
315
58
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
EVAC
Ceiling mounting
Since 1961
12 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting
EVAC Installation and mounting details
INTERNAL DETAIL - POLE MOUNTING
CABLE GLANDS ISO-M25 TYPE
PNA#02MON
type 4
type 5
Pole Mounting – With add sealing fitting
type 6
SEALING
FITTINGS
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 13
EVAC
Pole Mounting – Without add sealing fitting
Ex Lighting
EVAC Polar diagrams – photometric data
EVAC400HPS-D
EVAC400MH-D
EVAC
EVAC250HG-D
EVAC On request accessories
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20302.0070
EVAC 100 / 101 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0071
EVAC 200 / 201 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0072
EVAC 300 / 301 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0073
EVAC 500 / 501 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0025
EVAC 100 / 101 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0026
EVAC 200 / 201 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0027
EVAC 300 / 301 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0028
EVAC 500 / 501 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0074
EVAC 100 / 101 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0075
EVAC 200 / 201 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0076
EVAC 300 / 301 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0077
EVAC 500 / 501 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0037
EVAC 100 / 101 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0038
EVAC 200 / 201 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0039
EVAC 300 / 301 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0040
EVAC 500 / 501 SIZE STAINLESS STEEL PROTECTION GUARD
20302.0078
CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
AISI 316L STAINLESS STEEL STAINLESS STEEL
20302.0079
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
AISI 316L STAINLESS STEEL
20302.0082
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
AISI 316L STAINLESS STEEL
POLE MOUNTING KIT WITHOUT SEALING FITTINGS
Type 4
ALUMINIum
25° POLE MOUNTING KIT WITHOUT SEALING FITTINGS
Type 5
ALUMINIum POLE MOUNTING KIT WITH SEALING FITTINGS
Type 6
ALUMINIum REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics showed
on this bulletin can be considered as binding on our confirmation only.
Since 1961
14 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
LIGHTING FIXTURES
FOR LED LAMPS
Ex Lighting
EVAC...-LED
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
EVAC501-48LED
EVAC201-32LED
LIGHTING FIXTURE / CONTROL GEAR
ATEX 94/9/EC
EXECUTION
IEC Ex
II 2 G Ex d IIC T4 Gb Ex d IIC T4 Gb 2 G Ex tb IIIC T135°C Db Ex tb IIIC T135°C Db
INMETRO
Ex d IIC T4 Gb Ex tb IIIC T135°C Db
GOST-R (RTR/RTN)
1Ex d IIC T4 X DIP A21 TA (135)°C
GOST-K
1Ex d IIC T4 X DIP A21 TA (135)°C
AMBIENT
TEMPERATURE
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
PROTECTION
DEGREE
IP66
IP66
IP66
IP66
IP66
-
-
POCC IT. ME92.B02923
No. 07/43-269
CERTIFICATE REF.
RULES OF
COMPLIANCE
INERIS 01 ATEX 0054X
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004;
Mechanical characteristics
Body
Marine grade copper free aluminium (control gear & lamp body)
Globe
High-temperature resistant borosylicate glass
Painting
External epoxy powders grey ral-9006 colour
Screws
External stainless steel
Gaskets
Silicon rubber
Cable entry
1/2” npt size threaded
Electrical characteristics
Power supply
32W 120 or 230 or 277 Vac 700mA, frequency 50 ÷ 60Hz ± 5% (4 led)
48W 100-270 Vac 700mA, frequency 50 ÷ 60Hz ± 5% (6 led)
Lamp type
4 Led by 8W - minimum brightness 6000lm approx., Led type “cold-white” - efficiency>83%
Equivalent to 400W incandescent lamp
6 LED by 8W - minimum brightness 5200lm approx., led type “Cold-white” - efficiency>83% Equivalent to 500W incandescent lamp
Internal wiring
High-temperature resistant silicon rubber insulation cables
On Request Accessories:
• External painting colour on request
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 15
EVAC...-LED
Explosion Proof Electrical Equipment
CODE
TEMPERATURE
CLASS
( GAS )
POWER LAMP
TEMPERATURE
CLASS
( DUSTS )
LED
NUMBER
CABLE ENTRY
SIZE
POWER [W]
weight
[Kg]
DETAIL
4,50
A
7,00
B
LIGHTING FIXTURES FOR LED LAMPS - POWER SUPPLY 90-264V 50/60Hz
EVAC201-32LED
POWER LED
T4
T 135°C
4
32W
1 x 1/2" NPT
LIGHTING FIXTURES FOR LED LAMPS - POWER SUPPLY 100-270 Vac 700mA 50/60Hz
EVAC501-48LED
POWER LED
T4
T 135°C
6
Reference details
48W
1 x 1/2" NPT
Reference details
A
B
130
70
30
136
80
30
100
92
320
200
65
75
120
320
280
16 74,5
72
82
239
210,5
88
1x1/2”NPT
1x1/2”NPT
Ø176
261
Ø170
EVAC-LED Installation and mounting details
255
Luminaire
Code
EVAC-32LED
Name
EVAC-4_LED
Line
23_LED ALTA LUMINOSITA' - EVAC
Efficiency
Wall/structure and ceiling mounting
Luminaire
960.17
cd/klm
Code
EVAC-32LED
Name
EVAC-4_LED
Line
23_LED ALTA LUMINOSITA' - EVAC
Maximum value
Code 002110
960.17 cd/klm
Name EVAC-LED-4
Date 04-12-1912
Maximum value
Coordinate system
Diam=150mm
C-G
90
960.17 cd/klm
Position
Diam=150mm
0
270
270
90
EVAC-32LED
1
Total Flux
Lamp
Code
Number
Position
C Halfplanes
2119.00 lm
Lamp
Coordinate system
C-G
Total Flux
Asymmetrical
Code
EVAC-32LED
C=205.00 G=10.00
Number
1
180.0
Position
2119.00 lm
Asymmetrical
EVAC-32LED
1
Position
0.0
C Halfplanes
270.0 lm
2119.00
Asymmetrical
90.0
180.0
270.0
0.0
Flux 2119.00 lm
90.0
Maximum 960.17 cd/klm
C Halfplanes
C Halfplanes
0
180
180
Position C=205.00 G=10.00
Efficiency 98.45%
180.0
0.0
270.0
90.0
Symmetrical
Planes VH
0
Gamma Angle
Angles
Gamma
180
1/2” NPT
C-G
C=205.00 G=10.00
Total Flux
C=205.00 G=10.00
90
270
Coordinate system
Measurem.
Position
Code 002110
EVAC201-32LED
Measurem.
Efficiency
99.45%
Lamp
Code
Number
Position
Name EVAC-LED-4
Date 04-12-1912
Diam=150mm
99.45%
Luminaire
Code
EVAC-32LED
Name
EVAC-4_LED
Line
23_LED ALTA LUMINOSITA' - EVAC
Efficiency
Measurem.
Code 002110
Name EVAC-LED-4
Date 04-12-1912
99.45%
Maximum value
180°
Gamma Angles
120°
180°
120°
270
239
200
105°
105°
200
105°
90°
Gamma Angles
90°
105°
180°
120°
90°
75°
200
75°
90°
200
75°
105°
1/2” NPT
EVAC...-LED
EVAC-LED Technical data
105°
400
200
60°
90°
75°
60°
90°
600
400
60°
45°
75°
60°
45°
200
800
75°
600
cd/klm
1000
400
30°
60°
15°
0°
15°
30°
60°
45°
45°
800
LITESTAR 10
(c)OxyTech Srl www.oxytech.it
Page 1
600
cd/klm
1000
REMARK:
45°
30°
15°
45°
0°
15°
30°
Due to the development of the national and international specifications and of the technology, the above technical characteristics showed
on this bulletin can be considered as binding on our confirmation only.
LITESTAR 10
800
(c)OxyTech Srl www.oxytech.it
cd/klm
1000
30°
15°
0°
15°
30°
Since 1961
16 - Feam Catalogue 03
LITESTAR 10
(c)OxyTech Srl www.oxytech.it
Page 1
YOUR PARTNER FOR SAFETY
Page
LIGHTING FIXTURES
FOR LED LAMPS
Ex Lighting
EVAC-48LED
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE / CONTROL GEAR
ATEX 94/9/EC
EXECUTION
IEC Ex
II 2 G Ex d IIC T4 Gb Ex d IIC T4 Gb 2 D Ex tb IIIC T135°C Db
Ex tb IIIC T135°C Db
INMETRO
Ex d IIC T4 Gb Ex tb IIIC T135°C Db
GOST-R (RTR/RTN)
1Ex d IIC T4 X DIP A21 TA (135)°C
GOST-K
1Ex d IIC T4 X DIP A21 TA (135)°C
AMBIENT
TEMPERATURE
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
PROTECTION
DEGREE
IP66
IP66
IP66
IP66
IP66
INERIS 01 ATEX 0054X
-
-
POCC IT. ME92.B02923
No. 07/43-269
CERTIFICATE REF.
RULES OF
COMPLIANCE
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008 ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004;
Mechanical characteristics
Body
Marine grade copper free aluminium (control gear & lamp body)
Globe
High-temperature resistant borosylicate glass
Painting
External epoxy powders grey ral-9006 colour
Screws
External stainless steel
Gaskets
Silicon rubber
Cable entry
1 Threaded hole dia. 1" Npt (with pole mounting) 2 threaded holes 3/4" (with universal bracket)
Electrical characteristics
Power supply
48W 100-270 Vac 700mA, frequency 50 ÷ 60Hz ± 5% (6 led)
Lamp type
6 LED by 8W - minimum brightnes 5200lm approx., led type “Cold-white” - EFFICIENCY>83% Equivalent to 500W incandescent lamp
Internal wiring
High-temperature resistant silicon rubber insulation cables
On Request Accessories:
• External painting colour on request
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 17
EVAC-48LED
Explosion Proof Electrical Equipment
EVAC-48LED Technical data
CODE
POWER LAMP
TEMPERATURE CLASS
( GAS )
TEMPERATURE CLASS
( DUSTS )
LED NUMBER
POWER [W]
CABLE ENTRY SIZE
LIGHTING FIXTURES FOR LED LAMPS - POWER SUPPLY 90-264V 50/60Hz
EVAC201-48LED
POWER LED
T4
T 135°C
6
1 x 1” (pole mounting) 2 x 3/4” (universal bracket)
48W
EVAC-48LED Technical features
CODE
A [mm]
B [mm]
Ø C [mm]
D [mm]
weight [Kg]
EVAC201-48LED
360
225
176
365
6,80
EVAC201-48LED
400
225
176
-
6,80
Reference details
A
CABLE ENTRY
2 x 3/4" 1 x 1"
B
B
B
DETAIL
A
B
1x1”
2x3/4”
A
A
D
ØC
ØC
EVAC-48LED Installation and mounting details
Ceiling mounting
type 1
3/4” NPT
3/4” NPT
271
EVAC-48LED
Ex Lighting
Since 1961
18 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
EVAC-48LED Installation and mounting details
Pendant mounting
type 2
3/4” NPT
310
3/4” NPT
Wall/structure mounting
type 3
315
3/4” NPT
3/4” NPT
Pole Mounting – Without add sealing fitting
INTERNAL DETAIL - POLE MOUNTING
type 4
CABLE GLANDS ISO-M25 TYPE
PNA#02MON
type 5
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 19
EVAC-48LED
Ex Lighting
Ex Lighting
Luminaire
Code
EVAC-48LED
Name
EVAC-6_LED
Line
23_LED ALTA LUMINOSITA' - EVAC
Measurem.
Code 196-QL13-R03
Name EVAC-LED-6
Date 04-05-2013
Lamp
Code
Number
Position
EVAC-48LED
1
EVAC-48LED Polar diagrams – photometric data
100.00%
Coordinate system
C-G
Total Flux
Maximum value
913.86 cd/klm
Position
C=20.00 G=12.50
Double Symmetrical
EVAC
EVAC-48LED
Efficiency
165mm x 165mm
C Halfplanes
EVAC...-48LED
Measurem.
Luminaire
EVAC-48LED
CodeCode196-QL13-R03
Name
EVAC-6_LED
Name
90LUMINOSITA' - EVAC
Line EVAC-LED-6
23_LED ALTA
Date 04-05-2013
Efficiency
100.00%
Coordinate
Maximumsystem
value
Position
180
C-Gcd/klm
913.86
0
Position
C=20.00
G=12.50
165mm x 165mm
EVAC-48LED
1
C-G
Total Flux
3198.52 lm
C=20.00 G=12.50
180.0
C Halfplanes
270.0
90
180.0
0.0
270.0
90.0
0
180
0.0
Lamp
270.0
Code
type 6
90.0
EVAC-48LED
1
Number
Position
Total Flux
Double Symmetrical
270
mm
Pole Mounting – With add sealing fitting
180.0
Measurem. Lamp
Code 196-QL13-R03
Code
Name EVAC-LED-6
Number
Date 04-05-2013
Position
Coordinate system
3198.52 lm
3198.52 lm
Double Symmetrical
C Halfplanes
Flux 3198.52 lm
0.0
Maximum 913.86 cd/klm
90.0
Position C=20.00 G=12.50
Efficiency 100.00%
Asymmetric double
270
0
Gamma Angles
C Halfplanes
180°
Gamma Angles
Gamma
Angle
70
105°
120°
180°
200
105°
120°
200
105°
105°
180°
120°
90°
90°
90°
90°
200
75°
200
75°
75°
105°
400
60°
200
75°
60°
90°
600
60°
400
45°
200
1000
400
45°
LITESTAR 10
30°
15°
60°
45°
75°
800
cd/klm
600
0°
15°
60°
30°
(c)OxyTech Srl www.oxytech.it
45°
Page 1
600
800
800
1000
EVAC-48LED request accessories
45°
30°
CODE
cd/klm
INSTALLATION
MATERIAL
TYPE 2
STAINLESS STEEL AISI 316L
POLE MOUNTING KIT WITHOUT SEALING FITTINGS
Type 4
ALUMINIum
25° POLE MOUNTING Page
KIT1 WITHOUT SEALING FITTINGS
Type 5
ALUMINIum 15°
0°
15°
DESCRIPTION
30°
cd/klm
20302.0082
PENDANT MOUNTING
KIT FOR EVAC/PRC
1000
15°
LITESTAR 10
0°
(c)OxyTech Srl www.oxytech.it
ech.it
15°
30°
POLE MOUNTING KIT WITH SEALING FITTINGS
Page 1
Type 6
ALUMINIum REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
20 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
LIGHTING FIXTURES
FOR FLUORESCENT LAMPS
Explosion Proof Electrical Equipment
EVAC-FL
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE / CONTROL GEAR
ATEX 94/9/EC
EXECUTION
II 2 G Ex d IIC T6 Gb 2 G Ex tb IIIC T80°C Db IEC Ex
Ex d IIC T6 Gb Ex tb IIIC T80°C Db
INMETRO
GOST-R (RTR/RTN)
Ex d IIC T6 Gb Ex tb IIIC T80°C Db
1Ex d IIC T6 X DIP A21 TA (80)°C
GOST-K
1Ex d IIC T6 X DIP A21 TA (80)°C
AMBIENT
TEMPERATURE
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
PROTECTION
DEGREE
IP66
IP66
IP66
IP66
IP66
INERIS 01 ATEX 0054X
-
-
POCC IT. ME92.B02923
No. 07/43-269
CERTIFICATE REF.
RULES OF
COMPLIANCE
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004;
Mechanical characteristics
Body
marine grade copper free aluminium (control gear & lamp body)
globe
high-temperature resistant borosylicate glass
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
cable entry
3/4” npt size threaded
Installation swivel bracket
AISI 316L stainless steel
Electrical characteristics
Power supply (prc)
elettronic ballast 220V/240V - 50/60Hz (p.f.corrected - cos ρ ≥ 0,98)
lampholders
porcelain e27 size - plastic 2g10 size
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 4sq/mm cables (on lighting fixtures with PRC)
On Request Accessories:
•Ceiling mounting AISI 316L stainless steel kit complete with stainless steel hardware
•Pendant mounting AISI 316L stainless steel kit complete with stainless steel hardware
•Wall/structure mounting kit complete with stainless steel harware
•Galvanized steel wire protection guard
•Stainless steel wire protection guard
•White stove enamelled aluminium reflectors
•Stainless steel reflectors
•External painting colour on request
•Electronic ballast with voltage supply different than standard
•Lighting fixtures in execution Ex de
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 21
EVAC-FL
Ex Lighting
Ex Lighting
EVAC-FL
EVAC-FL Technical data
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY
SIZE
DETAIL
LIGHTING FIXTURES FOR FLUORESCENT LAMPS - POWER SUPPLY 220V/240V - 50/60Hz
EVAC101-15FL
1 x 15W T6
T 80°C
E-27
1 x 3/4”
A
EVAC100-15FL
1 x 15W T6
T 80°C
E-27
2 x 3/4”
B
EVAC201-23FL
1 x 23W T6
T 80°C
E-27
1 x 3/4”
A
EVAC301-218FL
2 x 18W T6
T 80°C
2G-10
2 x 3/4”
C
EVAC301-318FL
3 x 18W T6
T 80°C
2G-10
2 x 3/4”
C
EVAC501-236FL
2 x 36W T6
T 80°C
2G-10
2 x 3/4”
C
EVAC501-336FL
3 x 36W T6
T 80°C
2G-10
2 x 3/4”
C
EVAC-FL Technical features
CODE
A [mm]
B [mm]
C [mm]
Ø D [mm]
Ø E [mm]
EVAC101-15FL
150
270
235
145
280
weight [Kg] CABLE ENTRY
3,5
1 x 3/4”
DETAIL
EVAC100-15FL
150
270
235
145
280
3,5
2 x 3/4”
B
EVAC201-23FL
175
270
255
170
345
4
1 x 3/4”
A
A
EVAC301-218FL
225
605
590
190
395
12
2 x 3/4”
C
EVAC301-318FL
225
605
590
190
395
12
2 x 3/4”
C
EVAC501-236FL
225
648
620
255
515
15,5
2 x 3/4”
C
EVAC501-336FL
225
648
620
255
515
15,5
2 x 3/4”
C
Reference details
Reference details
B
ØA
2X3/4”
Ø8
.5
60
B
60
16
80
C
80
60
200
180
C
B
ØA
3/4”
3
A
ØD
ØE
ØD
ØE
Reference details
C
A
C
B
5
200
3/4” NPT
3/4” NPT
ØD
ØE
192
28 28
0
Ø1
30
Since 1961
22 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting
EVAC-FL Installation and mounting details
EVAC-FL
Ceiling mounting
3/4” NPT
3/4” NPT
3/4” NPT
271
3/4” NPT
16
type 1
Pendant mounting
Wall/structure mounting
type 2
type 3
315
3/4” NPT
3/4” NPT
3/4” NPT
310
3/4” NPT
58
3/4” NPT
3/4” NPT
3/4” NPT
54
3/4” NPT
180
Pole Mounting – Without add sealing fitting
INTERNAL DETAIL - POLE MOUNTING
type 4
CABLE GLANDS ISO-M25 TYPE
PNA#02MON
type 5
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 23
Ex Lighting
EVAC-FL
EVAC-FL Installation and mounting details
Pole Mounting – With add sealing fitting
type 6
SEALING
FITTINGS
EVAC-FL On request accessories
INSTALLATION
MATERIAL
20302.0070
CODE
EVAC 100 / 101 SIZE STANDARD REFLECTOR
DESCRIPTION
WHITE STOVE ENAMELLED ALUM.
20302.0071
EVAC 200 / 201 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0072
EVAC 300 / 301 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0073
EVAC 500 / 501 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0025
EVAC 100 / 101 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0026
EVAC 200 / 201 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0027
EVAC 300 / 301 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0028
EVAC 500 / 501 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL
20302.0074
EVAC 100 / 101 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0075
EVAC 200 / 201 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0076
EVAC 300 / 301 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0077
EVAC 500 / 501 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0037
EVAC 100 / 101 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0038
EVAC 200 / 201 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0039
EVAC 300 / 301 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0040 EVAC 500 / 501 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0078
CEILING MOUNTING KIT C/W HARDWARE
20302.0079
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
20302.0082
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
POLE MOUNTING KIT WITHOUT SEALING FITTINGS
25° POLE MOUNTING KIT WITHOUT SEALING FITTINGS
POLE MOUNTING KIT WITH SEALING FITTINGS
TYPE 1
TYPE 3
TYPE 2
TYPE 4
TYPE 5
TYPE 6
AISI 316L STAINLESS STEEL AISI 316L STAINLESS STEEL AISI 316L STAINLESS STEEL ALUMINIUM
ALUMINIUM
ALUMINIUM
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
24 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
PORTABLE LIGHTING FIXTURES
FOR INCANDESCENT LAMPS
Explosion Proof Electrical Equipment
EVP-100
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 /22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE
ATEX 94/9/EC
EXECUTION
AMBIENT
TEMPERATURE
PROTECTION
DEGREE
CERTIFICATE REF.
RULES OF
COMPLIANCE
IEC Ex
II 2 G Ex d IIC T4 Gb Ex d IIC T4 Gb II 2 D Ex tb IIIC T130°C/
Ex tb IIIC T130°C/T200°C Db
T200°C Db
INMETRO
Ex d IIC T4 Gb Ex tb IIIC T130°C/T200°C Db
GOST-R (RTR/RTN)
1Ex d IIC T6 (T4) X DIP A21 TA (130…200)°C
1Ex d IIC T6 (T4) X DIP A21 TA (130…200)°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
IP66
IP66
IP66
IP66
IP66
INERIS 01 ATEX 0054X
-
-
POCC IT. ME92.B02923
No. 07/43-269
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
-60°C ÷ +60°C
GOST-K
-60°C ÷ +60°C
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004; ГОСТ Р МЭК 61241-1-1-2002
Mechanical characteristics
Body
marine grade copper free aluminium (control gear & lamp body)
Globe
high-temperature resistant borosylicate glass
Painting
external epoxy powders grey ral-9006 colour
Screws
external stainless steel
Gaskets
silicon rubber
Cable entry
Nickel plated brass cable gland 1/2” npt (armoured cable)
Electrical characteristics
Power supply 12 ÷ 230V AC/DC
lampholders
e27 porcelain
On Request Accessories:
• External painting colour on request
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 25
EVP-100
Ex Lighting
Ex Lighting
EVP-100
EVP-100 Technical data
CODE
LAMP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE
ENTRY SIZE
DETAIL
LIGHTING FIXTURE FOR INCANDESCENT LAMP - POWER SUPPLY 230V-50Hz
EVP-100
100 W T4
T 130°C
E-27
CABLE GLAND 1/2” NPT
A
EVP-100 Technical features
CODE
A [mm]
B [mm]
C [mm]
Ø D [mm]
weight [Kg]
CABLE ENTRY
DETAIL
395
257
287
150
4,00
CABLE GLAND 1/2” NPT
A
EVP-100
Reference details
B
A
A
ØD
C
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
26 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
AIRCRAFT WARNING LIGHTS
AND A.W.L. CONTROL PANELS
Explosion Proof Electrical Equipment
AWL
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
OBSTRUCTION LIGHTING FIXTURE
ATEX 94/9/EC
EXECUTION
G Ex db IIC T6...T4 Gb II 2 D Ex tb IIIC T85°C...T135°C Db
AMBIENT TEMPERATURE
RULES OF COMPLIANCE
Ex db IIC T6...T4 Gb Ex tb IIIC T85°C...T135°C Db
GOST-R (RTR / RTN)
1Ex d IIC T6 (T5…T2) X DIP A21 TA (80…135)°C
GOST-K
1Ex d IIC T6 (T5…T4) X DIP A21 TA (80…135)°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
IP66
IP66
IP66
IP66
INERIS 01 ATEX 0054X
-
POCC IT. ME92.B02923
No. 07/43-269
PROTECTION DEGREE
CERTIFICATE REF.
IEC Ex - INMETRO
IEC 60079-0:2007; IEC 60079-1:2007; IEC 60079-31:2008;
EN 60079-0:2009; EN 60079-1:2007; EN 60079-7:2008; EN 60079-31:2009;
ГОСТ Р МЭК 60079-0:2011; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1:2004; -60°C ÷ +60°C
ГОСТ Р 51330.0 / 1 / 8 / 14-99; ГОСТ Р МЭК 61241-1-1-2002
CONTROL PANEL
ATEX 94/9/EC
IEC Ex - INMETRO
GOST-R (RTR / RTN)
GOST-K
EXECUTION
II 2 G Ex db IIB+H2 / IIC T6...T3 II 2 D Ex tb IIIC T85°C...T200°C installation
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
ZONE 1 / 2 - ZONE 21 / 22
IP66
IP66
IP66
IP66
PROTECTION DEGREE
RULES OF COMPLIANCE
Ex db IIB+H2 / IIC T6...T3 1 Ex d IIB+H2 / IIC T6...T3 1 Ex d IIB+H2 / IIC T6...T3 Ex tb IIIC T85°C...T200°C
Ex tD A21 IIIC T85°C...T200°C Ex tD A21 IIIC T85°C...T200°C EN 60079-0:2009; EN 60079-1:2007; EN 60079-7:2008; EN 60079-31:2009;
IEC 60079-0:2007; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0 / 1 / 8 / 14-99; IEC 60079-1:2007; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002;
ГОСТ Р МЭК 61241-1:2004; IEC 60079-31:2008;
Mechanical characteristics
Body
marine grade copper free aluminium
globe
high-temperature resistant borosylicate glass
fresnel len
shock proof acrilyc material suitable for high temperatures
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
cable entry
3/4” npt size threaded
Electrical characteristics
Lampholders
porcelain e27 size
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 4mm/sq cables
medium intensity
flashing obstruction light 1450 / 2000 cd intensity (over than 45mt distance)
low intensity
steady obstruction light 30 cd intensity (less than 45mt distance)
construction
single awl - twin awl (1 main + 1 spare) in according to icao directive
On Request Accessories:
• Galvanized steel wire protection guard
• Stainless steel wire protection guard
• Aircraft Warning Lights and control panel support manufactured in according to customer specification
• External painting colour on request
• Threaded cable entry different than standard
• Xenoflash 6J lamp
• Electronic with voltage supply different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 27
AWL
Ex Lighting
Ex Lighting
AWL Technical data
LAMP TYPE
TEMPERATURE
CLASS
(GAS)
TEMPERATURE
CLASS
(DUSTS)
FLASHING
[x/min.]
LAMPHOLDER
CABLE
ENTRY
SIZE
EVAC201-F
100W INCANDESCENT
T4
T 130°C
-
E-27
1 x 3/4”
A
EVAC200-F
100W INCANDESCENT
T4
T 130°C
-
E-27
2 x 3/4”
A-1
EVAC201-XF
2J XENOFLASH
T6
T 85°C
65 ± 10
E-27
1 x 3/4”
C
AWL
CODE
DETAIL
EVAC200-XF
2J XENOFLASH
T6
T 85°C
65 ± 10
E-27
2 x 3/4”
C-1
EVAC201-F2R
2 x 100W INCAND.
T4
T 130°C
-
E-27
1 x 3/4”
B
EVAC201-XF2R
2 x XENOFLASH 2J
T6
T 85°C
65 ± 10
E-27
2 x 3/4”
D
EVAC301-25R
40W INCANDESCENT
T4
T 130°C
-
E-27
1 x 3/4”
C
EVAC300-25R
40W INCANDESCENT
T4
T 130°C
-
E-27
2 x 3/4”
C-1
AWL Technical features
CODE
A [mm]
B [mm]
Ø C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
415
200
-
4,50
1 x 3/4”
A
EVAC201-F
-
EVAC200-F
430
415
200
-
4,50
2 x 3/4”
A-1
EVAC201-XF
-
260
176
-
4,50
1 x 3/4”
C
EVAC200-XF
280
260
176
-
4,00
2 x 3/4”
C-1
EVAC201-F2R
790
415
200
475
9,00
2 x 3/4”
B
EVAC201-XF2R
630
260
176
453
8,00
2 x 3/4”
D
EVAC301-25R
345
322
197
-
7,00
1 x 3/4”
C
EVAC300-25R
-
322
197
-
7,00
2 x 3/4”
C-1
Reference details
A
A1
ØC
B
D
ØC
ØC
A
A
B
B
B
ØC
1x3/4”
180
200
3/4”
3/4”
Since 1961
28 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting
AWL Technical features
Reference details
C1
D
AWL
C
D
ØC
ØC
A
A
B
B
B
ØC
ØC
1x3/4”
180
200
3/4”
3/4”
Aircraft warning lights models
FRESNEL
XENOFLASH
ROTALLARM
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 29
Ex Lighting
AWL
AWL Control panels
ex d
INSTRUMENT
HOUSING WITH
PHOTOELECTRIC CELL >>
01
BREATHER
VALVE
TYPE ecd 02
03
AUT.
ON
MAN.
OFF
04
05
ON
OFF
12
07
06
ON
OFF
ON
13
08
15
10
ON
OFF
OFF
14
09
ON
ON
OFF
OFF
16
11
ON
ON
OFF
17
OFF
18
19
Weatherproof Ip66
INSTRUMENT
HOUSING WITH
PHOTOELECTRIC CELL >>
BREATHER
VALVE
TYPE ecde
02
01
03
AUT.
ON
MAN.
OFF
04
05
06
07
EVAC On request accessories
CODE
DESCRIPTION
MATERIAL
20302.0075
EVAC 200 / 201 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0076
EVAC 300 / 301 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0038
EVAC 200 / 201 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0039
EVAC 300 / 301 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0078
STRUCTURE MOUNTING KIT C/W HARDWARE
1030.00055
RED FRESNEL LEN Ø155mm
PLASTIC
1030.00186
ORANGE FRESNEL LEN Ø155mm
PLASTIC
1030.00211
GREEN FRESNEL LEN Ø155mm
PLASTIC
1030.00213
WHITE FRESNEL LEN Ø155mm
PLASTIC
AISI 316L STAINLESS STEEL REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
30 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
MEdium intensity and loW
intensity MULTILED System
AIRCRAFT warning lights
Ex Lighting
MIOL - LIOL
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts) - Safe area Classification: Group II - Category 2G 2D
OBSTRUCTION WARNING LIGHTS
ATEX 94/9/EC
II 2 G Ex d IIC T6 Gb II 2 G Ex tb IIIC T85°C/
T200°C Db
EXECUTION
AMBIENT
TEMPERATURE
Ex d IIC T6 Gb Ex tb IIIC T85°C Db
INMETRO
GOST-R (RTR/RTN)
Ex d IIC T6 Gb Ex tb IIIC T85°C Db
1Ex d IIC T6 X DIP A21 TA (80)°C
GOST-K
1Ex d IIC T6 (T5…T3) X DIP A21 TA (80)°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
IP66
IP66
IP66
IP66
IP66
INERIS 01 ATEX 0054X
-
-
POCC IT. ME92.B02923
No. 07/43-269
PROTECTION DEGREE
CERTIFICATE REF.
IEC Ex
RULES OF
COMPLIANCE
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
INTERNATIONAL
REGULATIONS
COMPLIANCY FOR
VISUAL AIDS
-60°C ÷ +60°C
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004; ГОСТ Р МЭК 61241-1-1-2002
ICAO International Standards and Recommended Practices:
Aerodromes - Annex 14 - Volume 1 - 4th Edition (November 2004)
Charapter 6: Medium Intensity Type A-B-C Flashing - Steady burning obstacle light MIOL-A / MIOL-B / MIOL-C Charapter 6: Low Intensity Type A-B Steady burning obstacle light LIOL-A / LIOL-B
FAA Advisor Circular AC150/5345-43F E.B.#67 - Lamp type MIOL-A / MIOL-B / MIOL-C / LIOL-A / LIOL-B
Mechanical characteristics
Body
Painting
Marine grade copper free aluminium
High-temperature resistant borosylicate glass (zone 1/2 - 21/22 version) Transparent polycarbonate u/v resistant (safe area version)
External epoxy powders grey ral-9006 colour
Screws
External stainless steel
Gaskets
Silicon rubber
Cable Entry
3/4" Npt size threaded
Globe
Electrical characteristics
Leds
separate groups with individual led protection system - led technology stalilized by constant current generator
Consumption
LIOL-B = 4,8w (single and dual) / miol-B = 30w (single) - 60w (dual)
Medium intensity (MIOL)
flashing light with intensity 2000 cd (+/-25%) flashing 40 flash/minute
Low intensity (LIOL)
steady burning with intensity 32 cd (flashing on request)
Realization
single group leds system with own reflector dual groups leds system, each group with own reflector (1 main + 1 reserve)
Optical characteristics
Horizontal beam radiation
360° (miol / liol)
Vertical beam radiation
liol = between 5° and 10° / miol = 3°
Efficency
> 91% - pfc factor 0,99
Expetancy life
long life time - more than 10 years
Apply to:
Flare - Airport - Stacks - High buildings - Chimneys - Tower crane - Pipelines - Bridges - Radio and Television towers Transmission lines - Wind turbines - Radar - and so on
On request accessories:
•Stainless steel wire protection guard
•Aircraft Warning Lights and control panel support manufactured in according to customer specification
•External painting colour on request
•Threaded cable entry different than standard
•Control panel with simultaneous or catenary multilight flashing system
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 31
MIOL - LIOL
Explosion Proof Electrical Equipment
MIOL - LIOL
Ex Lighting
MIOL - LIOL Technical data
LED LAMP
GROUP
CODE
VISUAL AIDS
TYPES
FLASHING
[x/min.]
EXECUTION
TEMPERATURE TEMPERATURE
CLASS (GAS) CLASS (DUSTS)
CABLE
ENTRIES
DETAIL
1 x 3/4"
B
Low Intensity Obstruction warning lights
LIOL-A-S
> 10 cd x 1
LIOL-A-D
RED FIXED
> 10 cd x 2
LIOL-B-S
RED FIXED
> 32 cd x 1
LIOL-B-D
RED FIXED
> 32 cd x 2
RED FIXED
Ex-d
-
T6
T85°C
IP66
-
-
2 x 3/4"
D
Ex-d
T6
T85°C
1 x 3/4"
B
IP66
-
-
2 x 3/4"
D
Ex-d
T6
T85°C
1 x 3/4"
B
IP66
-
-
2 x 3/4"
D
Ex-d
T6
T85°C
1 x 3/4"
B
IP66
-
-
2 x 3/4"
D
MEDIUM Intensity Obstruction warning lights
MIOL-A-S
= 20.000 cd x 1
WHITE
FLASHING
MIOL-A-D
= 20.000 cd x 2
WHITE
FLASHING
40
MIOL-B-S
= 2.000 cd x 1
RED
FLASHING
40
RED
FLASHING
= 2.000 cd x 2
MIOL-B-D
= 2.000 cd x 1
MIOL-C-S
MIOL-C-D
RED FIXED
= 2.000 cd x 2
RED FIXED
40
IP66
-
-
2 x 3/4"
C
IP66
-
-
2 x 3/4"
C
Ex-d
T6
T85°C
1 x 3/4"
A
40
-
IP66
-
-
2 x 3/4"
C
Ex-d
T6
T85°C
1 x 3/4"
A
IP66
-
-
2 x 3/4"
C
Ex-d
T6
T85°C
1 x 3/4"
A
IP66
-
-
2 x 3/4"
C
Ex-d
T6
T85°C
1 x 3/4"
A
IP66
-
-
2 x 3/4"
C
MIOL - LIOL Technical features
MIOL
Reference details
MIOLA
MIOL
260
LIOL
Reference details
LIOL
B
LIOL
T
DO NO
310
315
(FIXING)
S
SOTT O TE
N
O
E
IR
DO
NO NOT
N
NE
RG
W
SO HIL
TT E
O
D
SE
GI NE
ER IO
EN ENS
T
IO
W H IL E E N E
ED
NON
AP
R
S
N
SOTT O TE
E
IR
RG
EN
IS
ED
NON
AP
R
151
(FIXING)
768
O
W H IL E E N E
P
EN
OP RIRE
AP
EN
OP RIRE
AP
DO
NO NOT
N
T
DO NO
EN
IS
W
SO HIL
TT E
O
D
SE
GI NE
ER IO
EN ENS
T
NE
P
IO
445
150
115,5
(FIXING)
135,5
270
275
(FIXING)
Since 1961
32 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
MIOL
Reference details
C
MIOL
LIOL
MIOL - LIOL Technical features
Reference details
D
MIOL
150
240
MIOL
LIOL
LIOL
LIOL
660
200
410
191
320
400
MIOL - LIOL Main rules for aircraft warning lights
MAIN RULES FOR VISUAL AIDS
ICAO Annex 14 - Aerodromes Vol. 1 - Chapter 6 / 10 (July 2004)
• The marking and/or lighting of obstacles is intended to reduce hazards to aircraft by indicating the presence of the obstacles
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.1)
• Marking (red-orange/white painting) is used for day time
• Marking may be ommitted when the obstacle is lighted
• A fixed obstacle above a horizontal surface should be marked and, if the aerodrome is used at night, lighted..
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.1.4)
• A system of preventive maintenance of visual aids shall be employed to ensure lighting and marking system reliability
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 10.4.2)
• The reliability of installed lighting equipments shold not less than one year
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 10.4.6)
• The number and arrangement of Low, Medium or High Intensity Obstacle Lights , at each level to be marked, shall be such that the object
is indicated from every angle in azimuth
• Where a light is shielded in any direction by another, additional light shall be provided
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.22)
• The number of lights needed for each level depends on the outside diameter of the obstacle
• The top lights should be placed sufficiently below the top, so as to minimize contamination by smoke, powders, and so on..
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.12)
AWL TYPES (Aircraft Warning Lights)
LIOL-A / B Low Intensity Obstacle Lights on fixed objects, Type-A / Type-B, shall be steady burning RED lights
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.23)
MIOL-A Medium Intensity Obstacle Lights on fixed objects, Type-A , shall be flashing WHITE lights
MIOL-B Medium Intensity Obstacle Lights on fixed objects, Type-B , shall be flashing RED lights MIOL-C Medium Intensity Obstacle Lights on fixed objects, Type-C , shall be steady burning RED lights
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.30)
MIOL-A / MIOL-B Medium Intensity Obstacle Lights Type-A / Type-B, located on an obstacle, shall be flash simultaneously
(ICA: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.32)
HIOL-A / B High Intensity Obstacle Lights on fixed objects, Type-A / Type-B, shall be flashing WHITE lights
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.33)
HIOL-A High Intensity Obstacle Lights Type-A, located on an obstacle, shall be flash simultaneously
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.35)
HIOL-B High Intensity Obstacle Lights Type-B, indicating the presence of tower supporting overhead wires, an others.. shall be flash sequentially
(ICAO: Aerodromes - Annex 14 - Vol. 1 - Ch. 6.3.36)
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 33
MIOL - LIOL
Ex Lighting
MIOL - LIOL
Ex Lighting
MIOL - LIOL Indicative diagram to obstruction light selection
OBSTACLE ELEVATION
> 45 m
NO
NO
MARKED
STRUCTURE (1)
YES
MARKED
STRUCTURE (1)
LIOL-A
LIOL-B
EXTENDED
YES
> 150 m
VERTICAL
STRUCTURE
TYPE
YES
MIOL-B + LIOL-B
MIOL-C
NO
YES
LEGEND
NO
DUAL HIOL-A/B
HIOL-A
DUAL HIOL-A/C
DUAL MIOL-A/B
MIOL-A
DUAL MIOL-A/C
DAY: HIOL-A
+ NIGHT: MIOL-B
DAY: HIOL-A
NIGHT: HIOL-A
DAY: HIOL-A
+ NIGHT: MIOL-C
DAY: MIOL-A
+ NIGHT: MIOL-B
DAY: MIOL-A
NIGHT: MIOL-A
DAY: MIOL-A
+ NIGHT: MIOL-C
(1)
painted obstacle in acc. to icao directive
LIOL-A
Low intensity obstruction light - TYPE A
LIOL-B
Low intensity obstruction light - TYPE B
MIOL-A
Medium intensity obstruction light - TYPE A
MIOL-B
Medium intensity obstruction light - TYPE B
MIOL-C
Medium intensity obstruction light - TYPE C
HIOL-A
High intensity obstruction light - TYPE A
HIOL-B
High intensity obstruction light - TYPE B
MIOL - LIOL Polar diagrams – photometric data
LIOL 32cd - Polar
LIOL 32cd - CARTESIAN
MIOL 2000cd - Polar
Flux 76.52 Im
Maximum 69.78 cd
Position H=-35.00 V=5.00
Efficiency: 100.00%
Flux 76.52 Im
Maximum 69.78 cd
Position H=-35.00 V=5.00
Efficiency: 100.00%
asymmetric VH
Flux 1864.58 Im
Maximum 4301.23 cd
Position H=80.00 V=-90.00
Efficiency: 100.00%
asymmetric VH
Flux 1864.58 Im
Maximum 4301.23 cd
Position H=80.00 V=-90.00
Efficiency: 100.00%
asymmetric VH
VH Planes
VH Planes
MIOL 2000cd - Cartesian
VH Planes
asymmetric VH
VH Planes
H Angles
H Angles
MIOL - LIOL On request accessories
CODE
DESCRIPTION
MATERIAL
20302.0074
EVAC 100 / 101 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0077
EVAC 500 / 501 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0037
EVAC 100 / 101 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
20302.0040
EVAC 500 / 501 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL
CONTROL PANEL WITH SIMULTANEOUS OR CATENARY MULTILIGHT FLASHING SYSTEM
ALUMINIUM / PAINTED STEEL
REMARK: Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
34 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
FLOODLIGHTS FOR HALOGEN AND
DISCHARGE LAMPS
Explosion Proof Electrical Equipment
SFD-SFDE
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
FLOODLIGHT
ATEX 94/9/EC
IEC Ex
INMETRO
EXECUTION
II 2 G Ex d IIB+H2
II 2 G Ex de IIB+H2
II 2 D Ex tD A21 Ex d IIB + H2
Ex de IIB + H2
Ex tD A21
Ex d IIB + H2
Ex de IIB + H2
Ex tD A21
1Ex d IIB + H2; 1Ex de IIB + H2
DIP A21
1Ex d IIB + H2; 1Ex de IIB + H2
DIP A21
TEMPERATURA
AMBIENTE
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
IP66
IP66
IP66
IP66
IP66
-
-
POCC IT. ME92.B02923
No. 07/43-269
PROTECTION
DEGREE
CERTIFICATE REF.
RULES OF
COMPLIANCE
INERIS 01 ATEX 0018
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
GOST-R (RTR/RTN)
GOST-K
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004
Mechanical characteristics
Body
marine grade copper free aluminium
Diffuser
tempered front glass
support
adjustable type hot dip galvanized steel
reflector
internal polished aluminium
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
cable entry
M20 (3/4” NPT for SFDE600HPNA) size threaded Electrical characteristics
Power supply conventional ballast 230v - 50hz (p.f.corrected - cos ρ ≥ 0,95)
lampholders
porcelain e40 size
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 4sq/mm cables
On Request Accessories:
• External painting colour on request
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 35
SFD-SFDE
Ex Lighting
Ex Lighting
SFD-SFDE
SFD-SFDE Technical data
CODE
POWER LA
MP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY
SIZE
DETAIL
FLOODLIGHTS FOR HALOGEN LAMP - POWER SUPPLY 230V-50Hz
SFD500IA
500 W
T2/T3 T 229°C /T 200°C
R7S
2 x ISO-M20
A
SFDE500IA
500 W
T2/T3 T 229°C /T 200°C
R7S
2 x ISO-M20
B
FLOODLIGHTS FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V-50Hz
SFD150HPNA
150 W
T3
T 200°C
E-40
2 x ISO-M20
A
SFDE150HPNA
150 W
T3
T 200°C
E-40
2 x ISO-M20
B
SFD250HPNA
250 W
T3
T 200°C
E-40
2 x ISO-M20
A
SFDE250HPNA
250 W
T3
T 200°C
E-40
2 x ISO-M20
B
SFD400HPNA
400 W
T2/T3
T 229°C /T 200°C
E-40
2 x ISO-M20
A
SFDE400HPNA
400 W
T2/T3
T 229°C /T 200°C
E-40
2 x ISO-M20
B
SFDE600HPNA
600 W
T2/T3
T 229°C /T 200°C
E-40
2 x3/4”
C
FLOODLIGHTS FOR METAL HALIDE LAMP - POWER SUPPLY 230V-50Hz
SFD250MH
250 W
T2/T3
T 202°C /T 200°C
E-40
2 x ISO-M20
A
SFDE250MH
250 W
T2/T3
T 202°C /T 200°C
E-40
2 x ISO-M20
B
SFD400MH
400 W
T2/T3
T 221°C /T 200°C
E-40
2 x ISO-M20
A
SFDE400MH
400 W
T2/T3
T 221°C /T 200°C
E-40
2 x ISO-M20
B
SFD-SFDE Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
E [mm]
F [mm]
SFD…
485
435
290
270
500
75
25,00
2 x ISO-M20
A
SFDE…
485
435
290
270
500
88
25,00
2 x ISO-M20
B
485
595
290
270
420
240
30,00
2 x3/4”
C
SFDE600HPNA
WEIGHT [Kg] CABLE ENTRY
DETAIL
Reference details
A
F
C
E
B
D
A
2 x ISOM20
2 x ISOM20
110 110
110 110
Since 1961
36 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting
SFD-SFDE
SFD-SFDE Technical features
Reference details
B
F
C
E
B
D
A
2 x ISOM20
2 x ISOM20
110 110
110 110
Reference details
C
A
C
E
B
D
F
2 x 3/4”
125
125
SFD-SFDE Polar diagrams – photometric data
SFD150HPS
SFDE250HPNA
Flux 14500.00 Im
Maximum 212.54 cd/klm
Position H=-30.00 V=-1.00
Efficiency: 51.89%
Planes H0
VH Planes
H Angles
SFD250MH
Flux 27000.00 Im
Maximum 212.54 cd/klm
Position H=-30.00 V=-1.00
Efficiency: 51.89%
Planes H0
VH Planes
H Angles
Flux 27000.00 Im
Maximum 212.54 cd/klm
Position H=-30.00 V=-1.00
Efficiency: 51.89%
Planes H0
VH Planes
H Angles
Since 1961
YOUR PARTNER FOR SAFETY
Catalogo Feam 03 - 37
Ex Lighting
SFD-SFDE
SFD-SFDE Polar diagrams – photometric data
SFD400MH
SFD400HPNA
Flux 32000.00 Im
Maximum 232.47 cd/klm
Position H=-30.00 V=-1.00
Efficiency: 56.76%
Planes H0
VH Planes
H Angles
SFD500IA
Flux 32000.00 Im
Maximum 232.47 cd/klm
Position H=-30.00 V=-1.00
Efficiency: 56.76%
Planes H0
VH Planes
H Angles
Flux 9500.00 Im
Maximum 218.80 cd/klm
Position H=-30.00 V=-1.00
Efficiency: 53.42%
Planes H0
VH Planes
H Angles
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics showed
on this bulletin can be considered as binding on our confirmation only.
Since 1961
38 - Catalogo Feam 03
YOUR PARTNER FOR SAFETY
FLOODLIGHTS FOR LED
LAMPS
Explosion Proof Electrical Equipment
SFDE LED
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
FLOODLIGHT
ATEX 94/9/EC
EXECUTION
AMBIENT
TEMPERATURE
PROTECTION
DEGREE
CERTIFICATE REF.
RULES OF
COMPLIANCE
II 2 G Ex d IIB+H2 T4 II 2 G Ex de IIB+H2 T4 II 2 D Ex tD A21 T135°C IEC Ex
Ex d IIB + H2 T4 Ex de IIB + H2 T4 Ex tD A21 T135°C
INMETRO
GOST-R (RTR/RTN)
Ex d IIB + H2 T4 1Ex d IIB + H2 T6 (T4); Ex de IIB + H2 T4 1Ex de IIB + H2 T6 (T4) Ex tD A21 T135°C
DIP A21 TA (135) °C
GOST-K
1Ex d IIB + H2 T6 (T4); 1Ex de IIB + H2 T6 (T4) DIP A21 TA (135) °C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
IP66
IP66
IP66
IP66
IP66
-
-
POCC IT. ME92.B02923
No. 07/43-269
INERIS 01 ATEX 0018
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004
Mechanical characteristics
Body
marine grade copper free aluminium
Diffuser
tempered front glass
support
adjustable type hot dip galvanized steel
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
cable entry
M20 size threaded Electrical characteristics
Power supply
Lamp type
192W 230Vac frequency 50Hz (Cos Ρ ≥ 0,98)
24 led by 8W (700 mA)- luminous flux 25000lm - led type “cold white” Equivalent to 400W Hpna/Mh lamp
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 4 sq/mm cables
On Request Accessories:
• External painting colour on request
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 39
SFDE LED
Ex Lighting
Ex Lighting
SFDE LED
SFDE LED Technical data
POWER
LAMP
CODE
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMP
TYPE
CABLE ENTRY
SIZE
DETAIL
2 x ISO-M20
A
FLOODLIGHTS FOR LED LAMP - POWER SUPPLY 230V-50Hz
SFDE192LED
192 W
T4 (Ta = -60°C / +60°C)
POWER
LED
T 135°C
SFDE LED Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
E [mm]
485
435
290
270
500
SFDE192LED
F [mm]
88
WEIGHT [Kg] CABLE ENTRY
25,00
DETAIL
2 x ISO-M20
A
Reference details
A
F
C
E
B
D
A
2 x ISOM20
2 x ISOM20
110 110
110 110
Luminaire
Code
SFDE-192LED
Name
LED FLOODLIGHT 192W
Line
16_LED ALTA LUMINOSITA' - SFDE
Measurem.
Code 002111-S001
Name LED FLOODLIGHT 200W
Date 03-12-2012
Lamp
Code
Number
Position
SFDE-192LED
1
SFDE LED Polar diagrams – photometric data
Efficiency
98.85%
Coordinate system
Maximum value
896.57 cd/klm
Measurem.
Code 002111-S001LCuomdeinaireSFDE-192LED
meHTLE
ODLIGHT 192W
Name LED FLOODLNIaG
2D0F0LOW
Line
16_LED ALTA LUMINOSITA' - SFDE
Date 03-12-2012
Position
Lamp
Measurem.
Code
SFDE-192LED
Code 002111-S001
Na
Nmue mLEbDeFrLOODLIG1HT 200W
Date 03-12-2012
Position
Coordinate system
V-H
Coordinate system
Position
H=-10.00 V=9.00
Efficiency
98.85%
V-H
Maximum value
Position
896.57 cd/klm
SFDE192LED
Total Flux
H=-10.00 V=9.00
H0.0
V0.0
H0.0
V0.0
Position H=10.00 V=9.00
H0.0
Efficiency 98.85%
Asymmetric VH
V0.0
180°
120°
200
105°
180°
90°
180°
VH Planes
Maximum 896.57 cd/klm
V0
V0
105°
Angles
H
120°
90°
200
105°
11907.00 lm
11907.00 lm
Asymmetric VH
Flux 11907.00 lm
VH Planes
H
H Angles
Angles
SFDE-192LED
1
Total Flux
VH Planes
H0
H0
Total Flux
Asymmetric VH
Lamp
Code
Number
Position
11907.00 lm
Asymmetric VH
V-H
H=-10.00 V=9.00
200
75°
120°
400
60°
20090°
105°
75°
60°
90°
105°
600
45°
45°
200
800
75°
75°
90°
cd/klm
1000
30°
15°
0°
20060°
15°
75°
LITESTAR 10
30°
400
60°
(c)OxyTech Srl www.oxytech.it
Page 1
600
400
60°
45°
45°
800
600
REMARK:
Due to the development of45°
the1000
national and internationalcd/klm
specifications and of the technology, the above technical characteristics showed
on this bulletin can be considered as binding on our confirmation only.
800
30°
15°
0°
15°
30°
Since 1961
1000
LITESTAR 10
0°
40 - Feam Catalogue
03
cd/klm
(c)OxyTech Srl www.oxytech.it
15°
Page 1
30°
YOUR PARTNER FOR SAFETY
Explosion Proof Electrical Equipment
Ex Lighting
RCDE
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
FLOODLIGHT
ATEX 94/9/EC
EXECUTION
IEC Ex
II 2 G Ex db IIC T4…T2 Ex db IIC T4…T2 II 2 D Ex tb IIIC T135°C…T230 °C Ex tb IIIC T135°C…T230 °C
TEMP. AMBIENT
PROTECTION
DEGREE
CERTIFICATE REF.
NORME DI
RIFERIMENTO
INMETRO
GOST-R (RTR/RTN)
Ex db IIC T4…T2 Ex tb IIIC T135°C…T230 °C
1Ex d IIC T6 T4…T2X Ex tD A21 T135…230°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
IP66
IP66
IP66
IP66
IP66
INERIS 03 ATEX 0004X
-
-
POCC IT. ME92.B02923
No. 07/43-269
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
-60°C ÷ +52°C
GOST-K
1Ex d IIC T6 T4…T2X Ex tD A21 T135…230°C
-60°C ÷ +52°C
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004
CONTROL GEAR
ATEX 94/9/EC
EXECUTION
TEMP. AMBIENT
PROTECTION
DEGREE
CERTIFICATE REF.
NORME DI
RIFERIMENTO
IEC Ex
II 2 G Ex d IIC T6÷T3 Gb Ex d IIC T6÷T3 Gb 2 D Ex tb IIIC T85°C-T200°C Db Ex tb IIIC T85°C-T200°C Db
INMETRO
Ex d IIC T6÷T3 Gb Ex tb IIIC T85°C-T200°C Db
GOST-R (RTR/RTN)
1Ex d IIC T6÷T3 X DIP A21 TA (T85°C-T200°C)
GOST-K
1Ex d IIC T6÷T3 X DIP A21 TA (T85°C-T200°C)
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
IP66
IP66
IP66
IP66
IP66
-
-
POCC IT. ME92.B02923
No. 07/43-269
INERIS 01 ATEX 0054X
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004;
Mechanical characteristics
Body
marine grade copper free aluminium
Diffuser
tempered front glass
Support
adjustable type hot dip galvanized steel
Reflector
internal polished aluminium
Painting
external epoxy powders grey ral-9006 colour
Screws
external stainless steel
Gaskets
silicon rubber
Cable entry
3/4” npt size threaded
Electrical characteristics
Power supply conventional ballast 230V - 50Hz (p.f.corrected - cos ρ ≥ 0,95)
Lampholders
porcelain E40 size
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4sq/mm cables
On Request Accessories:
• External painting colour on request
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 41
RCDE
FLOODLIGHTS FOR INCANDESCENT
AND DISCHARGE LAMPS
Ex Lighting
RCDE Technical data
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY
SIZE
DETAIL
FLOODLIGHTS FOR INCANDESCENT LAMP - POWER SUPPLY 230V-50Hz
RCDE500
500 W T2 T230°C E-40
1x3/4”
A
RCDE500
300 W T3 T160°C E-40
1x3/4”
A
RCDE500
500 W 1x3/4”
A
FLOODLIGHTS FOR BLENDED LIGHT LAMP - POWER SUPPLY 230V-50Hz
T3 / T2 T200°C / T230°C E-40
FLOODLIGHTS FOR HIGH PRESSURE MERCURY VAPOUR LAMP - POWER SUPPLY 230V-50Hz
RCDE250HG
250 W T3 T160°C E-40
2x3/4”
B
RCDE400HG
400 W T3 T200°C E-40
2x3/4”
B
RCDE250HPNA
250 W
T4 / T3 T135°C / T160°C E-40
2x3/4”
B
RCDE400HPNA
400 W
T3 T200°C E-40
2x3/4”
B
RCDE250MH
250 W
T4 / T3 T135°C / T160°C E-40
2x3/4”
B
RCDE400MH
400 W
T3 T200°C E-40
2x3/4”
B
WEIGHT [Kg] CABLE ENTRY
DETAIL
FLOODLIGHTS FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V-50Hz
FLOODLIGHTS FOR METAL HALIDE LAMP - POWER SUPPLY 230V-50Hz
RCDE Technical features
B [mm]
C [mm]
D [mm]
RCDE500
CODE
535
370
376
-
21,00
1 x 3/4”
A
RCDE250HG
535
370
406
700
29,00
2 x 3/4”
B
RCDE400HG
535
370
406
700
29,50
2 x 3/4”
B
RCDE250HPNA
535
370
406
700
31,00
2 x 3/4”
B
RCDE400HPNA
535
370
406
700
31,50
2 x 3/4”
B
RCDE250MH
535
370
406
700
26,50
2 x 3/4”
B
RCDE400MH
535
370
406
700
31,50
2 x 3/4”
B
B
1x3/4”
1x3/4”
1x3/4”
A
B
D
B
A
A [mm]
A
RCDE
CODE
C
RCDE250MH
220
C
RCDE250HG
220
RCDE250HPS
REMARK: Due to the development of the national and international specifications and of the technology, the above technical
characteristics showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
42 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
FLOODLIGHTS FOR LED
LAMPS
Explosion Proof Electrical Equipment
RCDE LED
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
FLOODLIGHT
ATEX 94/9/EC
EXECUTION
IEC Ex
INMETRO
II 2 G Ex db IIC T4 Ex db IIC T4 II 2 D Ex tb IIIC T135°C…T230 °C Ex tb IIIC T135°C…T230 °C
AMBIENT TEMP.
PROTECTION
DEGREE
CERTIFICATE REF.
RULES OF
COMPLIANCE
Ex db IIC T4 Ex tb IIIC T135°C…T230 °C
GOST-R (RTR/RTN)
1Ex d IIC T6 T4…T2X Ex tD A21 T135…230°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
IP66
IP66
IP66
IP66
IP66
INERIS 03 ATEX 0004X
-
-
POCC IT. ME92.B02923
No. 07/43-269
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
-60°C ÷ +52°C
GOST-K
1Ex d IIC T6 T4…T2X Ex tD A21 T135…230°C
-60°C ÷ +52°C
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004
CONTROL GEAR
ATEX 94/9/EC
EXECUTION
AMBIENT TEMP.
PROTECTION
DEGREE
CERTIFICATE REF.
RULES OF
COMPLIANCE
IEC Ex
II 2 G Ex d IIC T6÷T3 Gb Ex d IIC T6÷T3 Gb 2 D Ex tb IIIC T85°C-T200°C Db Ex tb IIIC T85°C-T200°C Db
INMETRO
Ex d IIC T6÷T3 Gb Ex tb IIIC T85°C-T200°C Db
GOST-R (RTR/RTN)
1Ex d IIC T6÷T3 X DIP A21 TA (T85°C-T200°C)
GOST-K
1Ex d IIC T6÷T3 X DIP A21 TA (T85°C-T200°C)
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
IP66
IP66
IP66
IP66
IP66
INERIS 01 ATEX 0054X
-
-
POCC IT. ME92.B02923
No. 07/43-269
EN 60079-0:2009;
EN 60079-1:2007;
EN 60079-7:2008;
EN 60079-31:2009
IEC 60079-0:2007; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008
ABNT NBR IEC 61242-31:2008-11 ГОСТ Р МЭК 61241-1:2004;
Mechanical characteristics
Body
marine grade copper free aluminium
Diffuser
tempered front glass
Support
adjustable type hot dip galvanized steel
Reflector
internal polished aluminium
Painting
external epoxy powders grey ral-9006 colour
Screws
external stainless steel
Gaskets
silicon rubber
Cable entry
3/4” npt size threaded
Electrical characteristics
Power supply
Internal wiring
336W 90÷305V ±10% - 50/60Hz - (cos ρ ≥ 0,93)
42 led by 8W(700mA) - luminous flux 700 mA 41000lm - led type “cold white” Equivalent to 400W Hpna/Mh lamp
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4 sq/mm cables
Lamp type
On Request Accessories:
• External painting colour on request
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 43
RCDE LED
Ex Lighting
Ex Lighting
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMP TYPE
CABLE ENTRY
SIZE
DETAIL
2 x 3/4”
A
FLOODLIGHTS FOR LED LAMP - POWER SUPPLY 120÷277V 50/60Hz
RCDE336LED
336 W T4 T135°C POWER LED
RCDE LED Technical features
CODE
A [mm]
RCDE336LED
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
370
406
700
29,00
535
CABLE ENTRY
2 x 3/4”
DETAIL
A
Reference details
A
1x3/4”
D
1x3/4”
A
B
RCDE LED
RCDE LED Technical data
C
220
RCDE LED Polar diagrams – photometric data
Luminaire
Code
RCDE-LED
Name
24SK00029-6n
Line
16_LED ALTA LUMINOSITA' - SFDE
Measurem.
Code 24SK00029
Name 24SK00029-6n
Date 13-09-2010
Lamp
Code
Number
Position
Efficiency
99.39%
Coordinate system
V-H
Total Flux
Maximum value
12354.00 cd/klm
Position
H=0.00 V=0.00
RCDE336LED
RCDE-LED
1
10558.00 lm
Asymmetric VH
VH Planes
H0.0
Flux: 10558.00 lm
H0
V0.0
Maximum: 12354.00 cd/klm
Position: H=0.00 V=0.00
V0
Efficiency: 99.39%
Double Symmetrical
VH Planes
Angles H
H Angles
180°
120°
3000
105°
105°
90°
90°
3000
75°
75°
6000
60°
60°
9000
45°
45°
12000
cd/klm
15000
30°
LITESTAR 10
15°
0°
(c)OxyTech Srl www.oxytech.it
15°
30°
Page 1
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
44 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Explosion Proof Electrical Equipment
Ex Lighting
EVO - EVT - TLF
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
PORTHOLE LIGHTING FIXTURE (EVO)
ATEX 94/9/EC
INMETRO
GOST-R (RTR/RTN)
II 2 G Ex d IIC T6-T5-T3 Gb Ex d IIC T6-T5-T3 Gb Ex d IIC T6-T5-T3 Gb II 2 D Ex tb IIIC T85°C-T100°C
Ex tb IIIC T85°C-T100°C-T200°C Db Ex tb IIIC T85°C-T100°C-T200°C Db
T200°C Db EXECUTION
AMBIENT TEMP.
CERTIFICATE REF.
GOST-K
Ex d IIC T3 Gb Ex tb IIIC T200°C Db
Ex d IIC T3 Gb Ex tb IIIC T200°C Db
-60°C ÷ +60°
-60°C ÷ +60°
-60°C ÷ +60°
-60°C ÷ +60°
-60°C ÷ +60°
IP66
IP66
IP66
IP66
IP66
INERIS 01 ATEX 0039 X
IECEx INE 12.0018X
CEPEL 12.2157
POCC IT. ME92.B02923
No. 07/43-269
PROTECTION
DEGREE
RULES OF
COMPLIANCE
IEC Ex
EN 60079-0:2006; EN 600791:2004; EN 61241-0:2006;
EN 61241-1:2004;
IEC 60079-0:2011; ABNT NBR IEC 60079-0:2011; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007-04; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008;
ABNT NBR IEC 60079-31:2008;
ГОСТ Р МЭК 61241-1:2004;
LIGHTING FIXTURE (EVT)
ATEX 94/9/EC
II 2 G Ex d IIC T6-T4-T3 Gb II 2 D Ex tb IIIC T85°C
T150°C Db EXECUTION
AMBIENT TEMP.
CERTIFICATE REF.
INMETRO
Ex d IIC T6-T5-T3 Gb Ex tb IIIC T85°C-T150°C Db
GOST-R (RTR/RTN)
GOST-K
Ex d IIC T4 Gb Ex d IIC T4 Gb Ex tb IIIC T135°C Db
Ex tb IIIC T135°C Db
Ex d IIC T4 Gb Ex tb IIIC T135°C Db
-60°C ÷ +60°
-60°C ÷ +60°
-60°C ÷ +60°
-60°C ÷ +60°
-60°C ÷ +60°
IP66
IP66
IP66
IP66
IP66
INERIS 01 ATEX 0040
IECEx INE 12.0027X
CEPEL 12.2155
POCC IT. ME92.B02923
No. 07/43-269
PROTECTION
DEGREE
RULES OF
COMPLIANCE
IEC Ex
EN 60079-0:2006; EN 600791:2004; EN 61241-0:2006;
EN 61241-1:2004;
IEC 60079-0:2011; ABNT NBR IEC 60079-0:2011; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; IEC 60079-1:2007-04; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
IEC 60079-31:2008;
ABNT NBR IEC 60079-31:2008; ГОСТ Р МЭК 61241-1:2004;
LIGHTING FIXTURE (TLF)
ATEX 94/9/EC
II 2 G Ex d / Ex de IIB T3 II 2 D Ex tD A21 T200°C
EXECUTION
AMBIENT TEMPERATURE
PROTECTION DEGREE
CERTIFICATE REF.
RULES OF
COMPLIANCE
GOST-R (RTR / RTN)
1Ex d IIB T3, 2Ex de IIB T3 DIP A21 TA 200°C
GOST-K
1Ex d IIB T3, 2Ex de IIB T3 DIP A21 TA 200°C
-20°C ÷ +55°C
-60°C ÷ +55°C
IP65
IP65
IP65
INERIS 01 ATEX 0026
POCC IT. ГБ05.B02536
No. 07/43-269
EN 60079-0:2006; EN 60079-1:2004; EN 61241-0:2006; EN 61241-1:2004;
ГОСТ Р МЭК 60079-0:2011; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1:2004
-60°C ÷ +55°C
ГОСТ Р 51330.0 / 1 / 8 / 14-99 ГОСТ Р МЭК 61241-1-1-2002
Mechanical characteristics
Body
diffuser
diffuser
painting
screws
gaskets
cable entry
protection guard
marine grade copper free aluminium
borosilicate frontal glass (evt)
tempered frontal glass (evo - tlf)
external epoxy powders grey ral-9006 colour
external stainless steel
silicon rubber
3/4” npt size threaded
galvanized wire steel (evt only)
Electrical characteristics
Power supply
lampholders
internal wiring
standard voltage 230v - 50hz
porcelain e27 size
high-temperature resistant silicon rubber insulation cables
On Request Accessories:
•External painting colour on request
•Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 45
EVO - EVT - TLF
LIGHTING FIXTURES
FOR INCANDESCENT LAMPS
EVO – EVT - TLF Technical data
CODE
LAMP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY
SIZE
DETAIL
LIGHTING FIXTURE FOR INCANDESCENT LAMP - POWER SUPPLY 230V-50Hz
EVO100
100 W
EVT100
100 W
TLF100
100 W
T3 T 200°C E-27
1x3/4”
T4 T135°C E-27
2x3/4”
B
T3 T 200°C E-27
2x3/4”
C
A
EVO – EVT - TLF Technical features
CODE
A [mm]
B [mm]
C [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
EVO100
Ø140
185
Ø162
2,00
1 x 3/4”
A
EVT100
Ø233
180
155
4,00
2 x 3/4”
B
TLF100
309
127
165
3,00
2 x 3/4”
C
Reference details
1 x 3/4”
B
Ø
C
A
C
2 x 3/4”
B
B
ØA
ØA
C
A
C
2 x 3/4”
B
EVO - EVT - TLF
Ex Lighting
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
46 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
LIGHTING FIXTURES FOR HIGH
EFFICENCY LED LAMPS
AND FLUORESCENT TUBE LAMPS
Explosion Proof Electrical Equipment
EXL
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE
ATEX 94/9/EC
EXECUTION
II 2 G Ex d IIB T6 II 2 D Ex tD A21 T85°C AMBIENT TEMP.
IEC Ex
Ex d IIB T6 II Ex tD A21 T85°C
INMETRO
-60°C ÷ +60°C
-60°C ÷ +60°C
-60°C ÷ +60°C
PROTECTION
DEGREE
GOST-R (RTR/RTN)
Ex d IIB T6 II Ex tD A21 T85°C
1Ex d IIB T6, Ex tD A21 TA 85°C
-60°C ÷ +60°C
GOST-K
1Ex d IIB T6, Ex tD A21 TA 85°C
-60°C ÷ +60°C
IP66
IP66
IP66
IP66
IP66
CERTIFICATE REF.
IMQ 09 ATEX 020
-
-
POCC IT. ME92.B02923
No. 07/43-269
RULES OF
COMPLIANCE
EN
EN
EN
EN
60079-0:2006;
60079-1:2004; 61241-0:2004;
61241-1:2004;
IEC 60079-0;
IEC 60079-1; IEC 61241-0;
IEC 61241-1;
ABNT NBR IEC 60079-0;
ABNT NBR IEC 60079-1;
ABNT NBR IEC 61241-0;
ABNT NBRIEC 61241-1;
ГОСТ Р МЭК 60079-0:2011; ГОСТ Р 51330.0/1/8/14-99; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1-1-2002
ГОСТ Р МЭК 61241-1:2004;
Mechanical characteristics
Body
Diffuser
painting
screws
reflectors
cable entry
marine grade copper free aluminium
high-temperature resistant borosylicate glass
external epoxy powders grey ral-9006 colour
external stainless steel
white stove enamelled sheet steel
3/4” npt size threaded c/w cable gland
Electrical characteristics
Power supply (neon)
Lampholders
internal wiring
terminals
elettronic ballast 230V/240V 50/60Hz (cos ρ ≥ 0,98)
elettronic ballast 230v/240v 50/60Hz (always on – maintained)
elettronic ballast 120v/240v 50/60Hz (network only – not maintained)
bi-in g5 cap (fluorescent lamp only)
high-temperature resistant silicon rubber insulation cables
suitable up to 4sq/mm cables
emergency unit
Emergency unit for maintained and not maintained (see technical data table)
Power supply (led)
Functional characteristics
•EXL08 (Network only): 8W fluorescent lamp and electronic ballast 230V/240V 50/60Hz
•EXL08ESA-3 (Always On - Maintained): 8W fluorescent lamp and electronic ballast 230V/240V AC and 3,6V – 4Ah 3 hours autonomy
emergency unit •EXL08E (Emergency only - Not Maintained): 8W fluorescent lamp and electronic ballast 230V/240V AC and 3,6V – 2Ah 3h emergency unit
•EXL08L / EXL208L (Network only): with high brightness LEDs (350mA – 4,8W) supply from 120V up to 240V AC/DC
•EXL08LE-SA (Always On - Maintained): with high brightness LEDs (350mA – 4,8W) supply from 100V up to 240V AC and 6V – 2Ah emergency unit
complete with charge status monitor LED system (RED; battery under charging – GREEN: battery loaded)
•EXL08LE (Emergency only - Not maintained): with high brightness LEDs (350mA – 1,1W) supply from 230V/240V AC and 6V – 2Ah emergency
unit complete with charge status monitor LED system (RED; battery under charging – GREEN: battery loaded)
Remarks
· EXL08E / EXL08ESA - 8W fluorescent lamp: emergency light intensity is 40% of light intensity with networking power supply
· EXL08LE - with high brightness LEDs (350mA -4.8 W): emergency light intensity is 100% of light intensity with networking power supply
On Request Accessories:
•External painting colour on request
•Electronic ballast with voltage supply different than standard
•Threaded cable entry different than standard
•Self-adhesive green label with EXIT sign (language on request)
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 47
EXL
Ex Lighting
Ex Lighting EXL Technical data
POWER SUPPLY
LAMP
EXL
CODE
mA (LED)
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
EMERGENCY
UNIT
AUTONOMY
LIGHTING FIXTURES FOR FLUORESCENT TUBE LAMPS
EXL08 230 ÷ 240V AC
8W
-
T6 T 85°C
no
-
EXL08E-3
230 ÷ 240V AC
8W
-
T6 T 85°C
3,6V - 4A/h
3h
EXL08ESA-3
230 ÷ 240V AC
8W
-
T6 T 85°C
3,6V - 4A/h
3h
EXL08L
120 ÷ 240V AC/DC
4,8 W
350
T6
T 85°C
no
-
EXL08LE
230 ÷ 240V AC
4,8 W
350
T6
T 85°C
3,6V - 2A/h
3h
EXL208L
120 ÷ 240V AC/DC
9,16 W
350
T6 T 85°C
no
-
100 ÷ 240V AC
4,8 W
350
T6 T 85°C
12V - 2A/h
3h
LIGHTING FIXTURES FOR HIGH EFFICENCY LED LAMPS
EXL08LE-SA
EXL Technical features
CODE
A [mm]
EXL08…
380
B [mm]
170
C [mm]
125
D [mm]
E [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
125
8,00
1 x 3/4”
A
270
Reference details
A
C
E
B
A
D
3/4” NPT
EXL On request accessories
CODE
2070.00088
EXL-08
DESCRIPTION
MATERIAL
SELF-ADHESIVE GREEN “EXIT” LABEL
POLYESTER
EXL-08L
EXL2-08L
REMARK: Due to the development of the national and international specifications and of the technology, the above technical
characteristics showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
48 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
INCREASED SAFETY LIGHTING
FIXTURES FOR BI-PIN
FLUORESCENT LAMPS
Explosion Proof Electrical Equipment
AVC
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE
ATEX 94/9/EC
IEC Ex
II 2 G Ex d e q IIC T4 Gb II 2 D Ex tb IIIC T80°C Db EXECUTION
AMBIENT TEMPERATURE
GOST-R
Ex d e q IIC T4 Gb X Ex tb IIIC T80°C Db
-20°C ÷ +60°C
-20°C ÷ +60°C
IP66
IP66
IP66
IP66
LCIE 12 ATEX 3050X
-
-
POCC IT. ME92.B02923
IEC 60079-0 Ed.6;
EN 60079-1:2007; EN 60079-5:2007;
EN 60079-07:2007; EN 60079-31:2009;
RULES OF COMPLIANCE
Ex d e q IIC T4 Gb Ex tb IIIC T80°C Db
-20°C ÷ +60°C
PROTECTION DEGREE
CERTIFICATE REF.
INMETRO
Ex d e q IIC T4 Gb Ex tb IIIC T80°C Db IEC 60079-0; IEC 60079-1; IEC 60079-31; IEC 60079-5;
IEC 60079-7;
ABNT NBR IEC 60079-0;
ABNT NBR IEC 60079-1; ABNT NBR IEC 60079-31;
ABNT NBR IEC 60079-5;
ABNT NBR IEC 60079-7;
-40°C ÷ +55°C
ГОСТ Р МЭК 60079-0:2011; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1:2004;
EMERGENCY UNIT
ATEX 94/9/EC
IEC Ex
II 2 G Ex d e q IIC T4 Gb II 2 D Ex tb IIIC T80°C Db EXECUTION
AMBIENT TEMPERATURE
RULES OF COMPLIANCE
Ex d e q IIC T4 Gb Ex tb IIIC T80°C Db
GOST-R
Ex d e q IIC T4 Gb X Ex tb IIIC T80°C Db
-20°C ÷ +60°C
-20°C ÷ +60°C
-20°C ÷ +60°C
IP66
IP66
IP66
IP66
LCIE 12 ATEX 3050X
-
-
POCC IT. ME92.B02923
PROTECTION DEGREE
CERTIFICATE REF.
INMETRO
Ex d e q IIC T4 Gb Ex tb IIIC T80°C Db IEC 60079-0 Ed.6;
EN 60079-1:2007; EN 60079-5:2007;
EN 60079-07:2007; EN 60079-31:2009;
IEC 60079-0; IEC 60079-1; IEC 60079-31; IEC 60079-5;
IEC 60079-7;
ABNT NBR IEC 60079-0;
ABNT NBR IEC 60079-1; ABNT NBR IEC 60079-31;
ABNT NBR IEC 60079-5;
ABNT NBR IEC 60079-7;
-40°C ÷ +55°C
ГОСТ Р МЭК 60079-0:2011; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1:2004;
Mechanical characteristics
Body
galss fibre reinforced polyester resin self-extinguishing acc. to UL94
Diffuser
U/V resistant polycarbonate - hinged to body
Safety closing
operated by hexagonal key
Gaskets
EPDM 60 rubber suitable for high temperatures and resistant to enviroments conditions
Internal reflector
white stove enamelled sheet aluminum
Cable entry
ISO-Metric complete with cable glands and plug
Electrical characteristics
Power supply
elettronic ballast 96...254V AC 50/60Hz (cos ρ ≥ 0,95)
Lampholders
bi-pin G13 cap
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4 sq/mm cables
Safety feature
with protections against over charge and over discharge
On Request Accessories:
•Pole mounting kit complete with stainless steel hardware
•Ceiling mounting kit complete with stainless steel hardware
•Pendant mounting kit complete with stainless steel hardware
• Wall/Structure mounting kit complete with stainless steel hardware
• Electronic ballast with voltage supply different than standard
• Voltage different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 49
AVC
Ex Lighting
Ex Lighting AVC Technical data
LAMP
AVC
CODE
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE
ENTRY
EMERGENCY
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 96...254V AC 50/60Hz
AVC 118
1 x 18W T4
T 80°C
G13
4 x M25 x 1,5
-
-
A
AVC 136
1 x 36W T4
T 80°C
G13
4 x M25 x 1,5
-
-
A
AVC 218
2 x 18W T4
T 80°C
G13
4 x M25 x 1,5
-
-
A
AVC 236
2 x 36W T4
T 80°C
G13
4 x M25 x 1,5
-
-
A
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230/240V AC 50/60Hz
AVC 118-E
1 x 18W T4
T 80°C
G13
4 x M25 x 1,5
4.8 V - 4Ah
3h
A
AVC 136-E
1 x 36W T4
T 80°C
G13
4 x M25 x 1,5
4.8 V - 4Ah
3h
A
AVC 218-E
2 x 18W T4
T 80°C
G13
4 x M25 x 1,5
4.8 V - 4Ah
3h
A
AVC 236-E
2 x 36W T4
T 80°C
G13
4 x M25 x 1,5
4.8 V - 4Ah
3h
A
AVC Technical features
CODE
A [mm]
AVC 118
705
B [mm]
C [mm]
222
D [mm]
WEIGHT [Kg]
134
450
7,50
CABLE ENTRY
DETAIL
4 x M25 x 1,5
A
AVC 136
1335
222
134
800
11,50
4 x M25 x 1,5
A
AVC 218
705
222
134
450
8,00
4 x M25 x 1,5
A
AVC 236
1335
222
134
800
12,00
4 x M25 x 1,5
A
CODE
A [mm]
B [mm]
AVC 118-E
705
AVC 136-E
1335
AVC 218-E
705
AVC 236-E
1335
222
C [mm]
222
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
134
450
9,00
4 x M25 x 1,5
A
222
134
800
13,00
4 x M25 x 1,5
A
222
134
450
9,50
4 x M25 x 1,5
A
134
800
13,50
4 x M25 x 1,5
A
Reference details
A
8MA
8MA
D
CLOSE
OPEN
A
C
M25
B
Since 1961
50 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting AVC Installation and mounting details
Ceiling mounting
Pendant mounting
type 2
AVC
type 1
CLOSE
Pole mounting
Assemblig detail with pole (typical)
Pendant mounting
type 2.1
type 4
CLOSE
OPEN
OPEN
Wall/structure mounting
OPE
N
250
CL
OSE
45°
CL
OSE
OPE
N
type 3
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 51
Ex Lighting AVC Polar diagrams – photometric data
AVC218
AVC118
AVC
AVC136
AVC with emergency unit (design and special features)
DESCRIPTION
INSTALLAZION
MATERIAL
POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
PENDANT POLE MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2.1
STAINLESS STEEL
PENDANT CHAIN MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
GALVANIZED STEEL
CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
GALVANIZED STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
52 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
INCREASED SAFETY LIGHTING
FIXTURES FOR BI-PIN
FLUORESCENT LAMPS
Explosion Proof Electrical Equipment
AVF
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
LIGHTING FIXTURE
ATEX 94/9/EC
EXECUTION
GOST-R (RTR / RTN)
II 2 GD EEx ed IIC T5 T70°C
INSTALLATION
-20°C ÷ +50°C
-40°C ÷ +50°C
IP66
IP66
IP66
KEMA 01 ATEX 2069
POCC IT. ME92.B02923
No. 07/43-269
PROTECTION DEGREE
CERTIFICATE REF.
EN 50014:1997, EN 50018:2000, EN 50019: 2000, EN 50281-1-1:1998
RULES OF COMPLIANCE
GOST-K
2Ex ed IIC T5 DIP A21 TA 70°C
1Ex ed IIC T5 Ex tD A21 TA 70°C
ГОСТ Р МЭК 60079-0:2011; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1:2004;
-40°C ÷ +55°C
ГОСТ Р 51330.0 / 1 / 8 / 14-99 ГОСТ Р МЭК 61241-1-1-2002
EMERGENCY UNIT
ATEX 94/9/EC
GOST-R (RTR / RTN)
II 2 G Ex ed IIC T6 II 2 D Ex tD A21 T85°C
EXECUTION
INSTALLATION
-40°C ÷ +55°C
IP66
IP66
IP66
IMQ 08 ATEX 026X
POCC IT. ME92.B02923
No. 07/43-269
EN 60070-0; EN 60079-7;
EN 61241-0; EN 61241-1;
RULES OF COMPLIANCE
1Ex ed IIB T6 DIP A21 TA 85°C
-40°C ÷ +55°C
PROTECTION DEGREE
CERTIFICATE REF.
GOST-K
1Ex ed IIB T6 DIP A21 TA 85°C
ГОСТ Р 51330.9-99 (МЭК 60079-10-95) ГОСТ Р 51330.13-99 (МЭК 60079-14-96) ГОСТ Р МЭК 61241-3-99
-40°C ÷ +55°C
ГОСТ Р 51330.0 / 1 / 8 / 14-99 ГОСТ Р МЭК 61241-1-1-2002
Mechanical characteristics
Body
galss fibre reinforced polyester resin self-extinguishing acc. to UL94
Diffuser
U/V resistant polycarbonate - hinged to body
Safety closing
operated by hexagonal key
Gaskets
EPDM 60 rubber suitable for high temperatures and resistant to enviroments conditions
Internal reflector
white stove enamelled sheet aluminum
Cable entry
ISO-Metric complete with cable glands and plug M20
Electrical characteristics
Power supply
elettronic ballast 220÷240V AC/DC 50/60 Hz (p.f. corrected - cos ρ ≥ 0,98)
Lampholders
bi-pin G13 cap
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4sq/mm cables
Safety feature
EEx de safety switch
On Request Accessories:
•Pole mounting kit complete with stainless steel hardware
•Ceiling mounting kit complete with stainless steel hardware
•Pendant mounting kit complete with stainless steel hardware
• Wall/Structure mounting kit complete with stainless steel hardware
• Electronic ballast with voltage supply different than standard
• AUTOTEST electronic system for emergency unit
• Voltage different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 53
AVF
Ex Lighting
Ex Lighting AVF Technical data
LAMP
AVF
CODE
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
CABLE
ENTRY
LAMPHOLDER
EMERGENCY
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V 50/60Hz
AVF 118
1 x 18W T5 T 70°C
G13
3 x M20 x 1,5
-
-
A
AVF 136
1 x 36W T5 T 70°C
G13
3 x M20 x 1,5
-
-
A
AVF 218
2 x 18W T5 T 70°C
G13
3 x M20 x 1,5
-
-
A
AVF 236
2 x 36W T5 T 70°C
G13
3 x M20 x 1,5
-
-
A
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V 50/60Hz
AVF 118-E
1 x 18W T5 T 70°C
G13
2 x M20 x 1,5
4.8 V - 4Ah
3h
B
AVF 136-E
1 x 36W T5 T 70°C
G13
2 x M20 x 1,5
4.8 V - 4Ah
3h
B
AVF 218-E
2 x 18W T5 T 70°C
G13
2 x M20 x 1,5
4.8 V - 4Ah
3h
B
AVF 236-E
2 x 36W T5 T 70°C
G13
2 x M20 x 1,5
4.8 V - 4Ah
3h
B
AVF Technical features
A [mm]
B [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
AVF 118
CODE
730
215
C [mm]
160
D [mm]
400
6,00
3 x M20 x 1,5
A
AVF 136
1340
215
160
450
6,50
3 x M20 x 1,5
A
AVF 218
730
215
160
400
7,00
3 x M20 x 1,5
A
AVF 236
1340
215
160
450
7,50
3 x M20 x 1,5
A
A [mm]
B [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
AVF 118-E
CODE
925
215
C [mm]
280
D [mm]
400
11,00
2 x M20 x 1,5
B
AVF 136-E
1535
215
280
450
11,50
2 x M20 x 1,5
B
AVF 218-E
925
215
280
400
12,00
2 x M20 x 1,5
B
AVF 236-E
1535
215
280
450
12,50
2 x M20 x 1,5
B
Reference details
A
8MA
D
8MA
C
8MA
B
B
A
8MA
D
8MA
C
8MA
B
A
Since 1961
54 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting AVF Installation and mounting details
Ceiling mounting
Pendant mounting
type 2
Wall/structure mounting
type 3
type 4
0
10
AVF
type 1
Pole mounting
Assemblig detail with pole (typical)
50
100
45°
AVF Polar diagrams – photometric data
AVF218
AVF136
AVF236
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 55
Ex Lighting AVF with emergency unit (design and special features)
AVF
GENERALITY:
The controller unit system permits to manage in AUTOTEST the verify of emergency unit working This system allows the emergency working of every fluorescent tube lamps (NON maintened working)
The check and the control system has been realized by proper microprocessor which perform the following tests :
- continuous test on the battery charger working, on the operation of the battery, and on presence of voltage supply - duration test in emergency working (every 3 months) with check of battery charge
- test of emergency working (weekly) with check of right lamp operation
Every information concerning the checks can be managed singly or tranmitted by “remote control system” in order to manage complete
illumination system test in centralized way.
Multicolor LED indicator in standard working (continuous led light)
ON
ON
ON
ON
ON
ON
ON
ON
ON
Regular operation
ON
ON
ON
ON
ON
ON
ON
ON
ON
Failed battery performance check
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Lack of main power supply
ON
ON
ON
OFF
ON
ON
ON
OFF
ON
Lack of battery
Multicolor LED indicator during test opetarion (intermittent led light)
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Performing lamp test
ON
ON
OFF
ON
ON
OFF
ON
ON
OFF
Performing battery pack test
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Failed lamp test
Multicolor LED indicator during batteries recharging phase
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
24 hours
ON
ON
ON
ON
ON
ON
ON
ON
ON
After 24 hours
AVF On request accessories
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20301.0162
POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0163
POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0165
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
STAINLESS STEEL
20302.0121
CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
GALVANIZED STEEL
20302.0128
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
AUTOTEST electronic system
-
-
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
56 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
FLOODLIGHT PROJECTORS
FOR INDUCTION LAMPS
Explosion Proof Electrical Equipment
SFDQL
Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
Classification: Group II - Category 2G 2D
FLOODLIGHT
ATEX 94/9/EC
II 2 G Ex eq II T3 II 2 D Ex tD A21 T 200°C EXECUTION
AMBIENT TEMPERATURE
IEC Ex
Ex eq II T3 Ex tD A21 T 200°C INMETRO
Ex eq II T3 Ex tD A21 T 200°C
GOST-R
1Ex eq II T3 X Ex tD A21 T 200°C
-40°C ÷ +60°C
-40°C ÷ +60°C
-40°C ÷ +60°C
IP66
IP66
IP66
IP66
CERTIFICATE REF.
IMQ 09 ATEX 014X
-
-
POCC IT. ME92.B02923
RULES OF COMPLIANCE
EN 60079-0:2006;
EN 60079-5: 2007;
EN 60079-7:2007;
EN 61241-0:2006;
EN 61241-1:2004
PROTECTION DEGREE
IEC 60079-0 :2007-10; ABNT NBR IEC 60079-0:2007-10;
IEC 60079-1 :2007-04; ABNT NBR IEC 60079-1:2007-04;
ABNT NBR IEC 61242-31:2008-11
IEC 60079-31 :2008-11
-40°C ÷ +60°C
ГОСТ Р МЭК 60079-0:2011; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1:2004;
Mechanical characteristics
Body
marine grade copper free aluminum
Diffuser
tempered front glass
Support
steel bracket with rotation-proof system
Reflector
anodized and polished 99,85 pure aluminum internal optic
Painting
thermosetting polyester powder resistant to atmospheric agents and corrosion grey RAL 9006 colour
Screws
stainless steel
Gaskets
pure silicon heat resistance
Cable entry
iso-Metric complete with nikel plated brass cable gland M20
Electrical characteristics
Power supply
120 ÷ 277V AC 50/60Hz 55W - 85W - 165W
Lamp
long life induction lamp (60.000 hours)
Terminals
suitable up to 4 sq/mm cables
On Request Accessories:
•Power supply 90 ÷ 120V AC/DC (55/85W only)
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 57
SFDQL
Ex Lighting
Ex Lighting
SFDQL
SFDQL Technical data
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
CABLE ENTRY SIZE
DETAIL
FLOODLIGHT FOR INDUCTION LAMP - POWER SUPPLY 120 ÷ 277V AC 50/60Hz 55W - 85W - 165W
SFDQL-55JB
55W T3 (Ta = -40°C / +60°C) T 200°C 2 x ISO M20
A
SFDQL-85JB
85W
T3 (Ta = -40°C / +60°C) T 200°C 2 x ISO M20
A
SFDQL-55
55W T3 (Ta = -40°C / +60°C) T 200°C 1 x PCE M20
B
SFDQL-85
85W
T3 (Ta = -40°C / +60°C) T 200°C 1 x PCE M20
B
FLOODLIGHT FOR INDUCTION LAMP - POWER SUPPLY 120 ÷ 277V AC 50/60Hz 55W - 85W - 165W
SFDQL-165JB
165W T3 (Ta = -40°C / +40°C) T 200°C 2 x ISO M20
A
SFDQL-165
165W
T3 (Ta = -40°C / +40°C) T 200°C 1 x PCE M20
B
WEIGHT [Kg]
CABLE ENTRY
DETAIL
SFDQL Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
SFDQL-55JB
430
460
545
260
8,50
2 x ISO M20
A
SFDQL-85JB
430
460
545
260
8,70
2 x ISO M20
A
SFDQL-165JB
430
460
545
260
9,50
2 x ISO M20
A
SFDQL-55
430
460
545
180
8,00
1 x PCE M20
B
SFDQL-85
430
460
545
180
8,20
1 x PCE M20
B
SFDQL-165
430
460
545
180
9,00
1 x PCE M20
B
Reference details
A
A
D
II 2G Ex eq II T3
II 2D Ex tD A21 IP 66 T200° C
IMQ 08 ATEX 014X
www.feam-ex.com
INDUCTION LAMP
SFDQL
C
B
0722
55W
85W
165W
55W-85W
Ta -40° C / +60° C
180÷230V DC
180÷277V AC
90÷120V AC/DC
165W
Ta -40° C / +40° C
2 X ISO M20
0°
12
155
155
Since 1961
58 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting
Reference details
B
A
D
II 2G Ex eq II T3
II 2D Ex tD A21 IP 66 T200° C
IMQ 08 ATEX 014X
www.feam-ex.com
INDUCTION LAMP
SFDQL
B
0722
C
55W
85W
165W
55W-85W
Ta -40° C / +60° C
180÷230V DC
180÷277V AC
90÷120V AC/DC
165W
Ta -40° C / +40° C
155
0°
12
1 X PCE M20
155
SFDQL Polar diagrams – photometric data
SFDQL55
SFDQL85
SFDQL165
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 59
SFDQL
SFDQL Technical features
Ex Lighting
SFDQL
SFDQL On request accessories
CODE
DESCRIPTION
20303.0099
PROTECTION GRID
20303.0100
POLE ADAPTER - DIA. 40÷60mm
Protection grid
20303.0099
MATERIAL
ALUMINUM
PAINTED STEEL
Pole adapter
20303.0100
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
60 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
LIGHTING FIXTURES FOR
FLUORESCENT TUBE LAMPS
Explosion Proof Electrical Equipment
EVSN
Installation: hazardous areas - Zone 2 (Gases) - Zone 22 (Dusts)
Classification: Group II - Category 3G 3D
LIGHTING FIXTURE
ATEX 94/9/EC
IEC Ex
INMETRO
II 3 G Ex nA II T6/T5/T4 Ex nA II T6/T5/T4 Ex nA II T6/T5/T4 II 3 D Ex tD A22 T85°C/
Ex tD A22 T85°C/T100°C/T135°C Ex tD A22 T85°C/T100°C/T135°C
T100°C/T135°C EXECUTION
AMBIENT TEMPERATURE
GOST-R
2Ex nA II T6 (T5) X Ex tD A22 T85°C, T100°C
-20°C ÷ +60°C
-20°C ÷ +60°C
-20°C ÷ +60°C
IP65/66
IP65/66
IP65/66
IP65/66
CERTIFICATE REF.
IMQ 08 ATEX 008X
-
-
POCC IT. ME92.B02923
RULES OF COMPLIANCE
EN 60079:2006;
EN 60079-15:2005;
EN 61241-0:2006;
EN 61241-1:2004
PROTECTION DEGREE
-40°C ÷ +60°C
IEC 60079-0 :2007-10; ABNT NBR IEC 60079-0:2007-10; ГОСТ Р 51330.9-99 (МЭК 60079-10-95);
IEC 60079-1 :2007-04; ABNT NBR IEC 60079-1:2007-04; ГОСТ Р 51330.13-99 (МЭК 60079-14-96);
ABNT NBR IEC 61242-31:2008-11
IEC 61242-31 :2008-11
ГОСТ Р МЭК 61241-3-99
Mechanical characteristics
Body
glass fibre reinforced polyester resin
Diffuser
U/V resistant polycarbonate - hinged to body
Safety closing
stainless steel hooks with safety device
Gaskets
EPDM 60 rubber suitable for high temperatures and resistant to enviroments conditions
Internal reflector
white stove enamelled sheet steel
Cable entry
complete with PVC cable gland
Electrical characteristics
Power supply
dual channel electronic ballast 110÷260V AC/DC 50/60Hz (cos ρ ≥ 0,98)
Lampholders
bi-pin G13 cap
Terminals
suitable up to 6 sq/mm cables
On Request Accessories:
• Pole mounting kit complete with stainless steel hardware
• Ceiling mounting kit complete with stainless steel hardware
• Pendant mounting kit complete with stainless steel hardware
• Wall/Structure mounting kit complete with stainless steel hardware
• Electronic ballast with voltage supply different than standard
• Ex-de safety switch
• AUTOTEST electronic system for emergency unit
• Up to 4 cable entries
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 61
EVSN
Ex Lighting
Ex Lighting EVSN Technical data
EVSN
CODE
LAMP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE ENTRY WITH EMERGENCY
CABLE GLAND
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 110V / 260V - 50/60Hz
EVSN118EL
EVSN136EL
EVSN158EL
EVSN218EL
EVSN236EL
EVSN258EL
T6 T 85°C
1 x 18W
T5
T100°C
G13
T4
T135°C
T6
T 85°C
1 x 36W
T5
T100°C
G1
2 x M20
-
-
A
2 x M20
-
-
A T4
T135°C
1 x 58W
T5
T100°C G13
2 x M20
-
-
A
T6
T 85°C 2 x 18W
T5 T100°C G13
2 x M20
-
-
A
T4
T135°C
T6
T 85°C 2 x 36W
T5 T100°C T4
T135°C
2 x 58W
T5
T100°C G13 2 x M20
-
-
A
G13
2 x M20
-
-
A
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V / 240V - 50/60Hz
EVSNE118EL
EVSNE136EL
EVSNE158EL
EVSNE218EL
T6
T 85°C 1 x 18W
T5
T100°C
T4
T135°C
T6 T 85°C
1 x 36W
T5
T100°C
T4
T135°C
1 x 58W
T5
T100°C 3h
A
G13
2 x M20
4,8V - 4Ah
3h
A
G13
2 x M20
4,8V - 4Ah
3h
A
T6
T 85°C T5
T100°C
T4
T135°C
T6
T 85°C
2 x 36W T5
T100°C
4,8V - 4Ah
2 x M20
2 x 18W
EVSNE236EL
G13
EVSNE258EL 2 x 58W
G13
2 x M20
4,8V - 4Ah
3h
A
G13 2 x M20
4,8V - 4Ah
3h
A 4,8V - 4Ah
3h
A
T4
T135°C
T5
T100°C G13
2 x M20
EVSN Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
EVSN118EL
667
90
98
420
1,75
2 x M20
A
EVSN136EL
1276
90
98
775
2,45
2 x M20
A
EVSN158EL
1576
90
98
1070
2,65
2 x M20
A
EVSN218EL
667
155
102
455
2,10
2 x M20
A
EVSN236EL
1276
155
102
770
3,90
2 x M20
A
EVSN258EL
1576
155
102
1055
4,00
2 x M20
A
Reference details
D
C
A
A
B
Since 1961
62 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting EVSN Technical features
CODE
B [mm]
C [mm]
667
90
98
D [mm]
420
WEIGHT [Kg]
3,00
CABLE ENTRY
2 x M20
DETAIL
A
EVSN136EL
1276
90
98
775
3,70
2 x M20
A
EVSN158EL
1576
90
98
1070
4,35
2 x M20
A
EVSN218EL
667
155
102
455
3,35
2 x M20
A
EVSN236EL
1276
155
102
770
5,15
2 x M20
A
EVSN258EL
1576
155
102
1055
6,45
2 x M20
A
EVSN Installation and mounting details
Ceiling mounting
Pendant mounting
type 1
type 2
Wall/structure mounting
type 4
type 3
Pole mounting
Assemblig detail with pole (typical)
0
10
50
100
45°
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 63
EVSN
A [mm]
EVSNE118EL
Ex Lighting EVSN Polar diagrams – photometric data
EVSn136
EVSn158
EVSn218
EVSn236
EVSn258
EVSN
EVSn118
EVSN On request accessories
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20302.0122
POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20302.0123
POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20302.0125
POLE MOUNTING KIT (SIZE 1” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0165
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
STAINLESS STEEL
20303.0091
CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
GALVANIZED STEEL
20303.0095
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
64 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
FLOODLIGHTS
FOR DISCHARGE LAMPS
Explosion Proof Electrical Equipment
SFDN
Installation: hazardous areas - Zone 2 (Gases) - Zone 22 (Dusts)
Classification: Group II - Category 3G 3D
Asymmetric
Symmetric
Concentrating
FLOODLIGHT
ATEX 94/9/EC
II 3 G Ex nR II T3 II 3 D Ex tD A22 T200°C
EXECUTION
AMBIENT TEMP.
RULES OF COMPLIANCE
Ex nR II T3 Ex tD A22 T200°C
IN METRO
Ex nR II T3 Ex tD A22 T200°C
GOST-K
2Ex nR II T3 Ex tD A22 T200°C -20°C ÷ +60°C -20°C ÷ +60°C -20°C ÷ +60°C IP66
IP66
IP66
IP66
IMQ 08 ATEX 019
-
-
POCC IT. ME92.B02923
PROTECTION DEGREE
CERTIFICATE REF.
IEC Ex
EN 60079-0; EN 60079-15; EN 61241-0; EN 61241-1;
IEC 60079-0:2007-10; ABNT NBR IEC 60079-0:2007-10; IEC 60079-1:2007-04; ABNT NBR IEC 60079-1:2007-04; IEC 60079-31:2008-11;
ABNT NBR IEC 61242-31:2008-11; -40°C ÷ +60°C ГОСТ Р МЭК 60079-0:2011; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1:2004; Mechanical characteristics
Body
marine grade copper free aluminum
Diffuser
tempered front glass
Support
steel bracket with rotation-proof system
Reflector
anodized and polished 99,85 pure aluminum internal optic
Painting
thermosetting polyester powder resistant to atmospheric agents and corrosion grey RAL 9006 colour
Screws
stainless steel
Gaskets
pure silicon heat resistance
Cable entry
complete with cable gland
Internal optic
(S) symmetric optic - (A)asymmetric optic - (C) concentrating beam optic Electrical characteristics
Power supply
conventional ballast 230V - 50Hz (P.F. CORRECTED - cos ρ ≥ 0,95)
Lampholders
porcellain E40 / E27 size
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4 sq/mm cables
On Request Accessories:
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 65
SFDN
Ex Lighting
Ex Lighting SFDN
SFDN Technical data
CODE
LAMP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY WITH
CABLE GLAND
DETAIL
FLOODLIGHT FOR HIGH PRESSURE MERCURY VAPOUR LAMP - POWER SUPPLY 230V 50Hz
SFDN#250HG-(1)
250 W T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
SFDN#400HG-(1)
400 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
FLOODLIGHT FOR METAL HALIDE LAMP - POWER SUPPLY 230V 50Hz
SFDN#150MH-(1)
150 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
SFDN#250MH-(1)
250 W T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
SFDN#400MH-(1)
400 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
FLOODLIGHT FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V 50Hz
SFDN#150HPNA-(1)
150 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
SFDN#250HPNA-(1)
250 W T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
SFDN#400HPNA-(1)
400 W
T3 (Ta = -20°C / +60°C)
T 200°C
E-40
1 x PCE M20
A
(1) INTERNAL OPTICAL BEAM: (S) SYMMETRIC BEAM - (A) ASYMMETRIC BEAM - (C) CONCENTRATING BEAM
SAMPLE: SFDN#400MH-S = FLOODLIGHT 400W METAL HALIDE WITH SYMMETRIC OPTICAL BEAM SFDN Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
SFDN#250HG-(1)
544
461
430
180
8,80
1 x PCE M20
A
SFDN#400HG-(1)
544
461
430
180
9,10
1 x PCE M20
A
SFDN#150MH-(1)
544
461
430
180
9,50
1 x PCE M20
A
SFDN#250MH-(1)
544
461
430
180
9,70
1 x PCE M20
A
SFDN#400MH-(1)
544
461
430
180
11,00
1 x PCE M20
A
SFDN#150HPNA-(1)
544
461
430
180
10,50
1 x PCE M20
A
SFDN#250HPNA-(1)
544
461
430
180
11,10
1 x PCE M20
A
SFDN#400HPNA-(1)
544
461
430
180
12,30
1 x PCE M20
A
(1) INTERNAL OPTICAL BEAM: (S) SYMMETRIC BEAM - (A) ASYMMETRIC BEAM - (C) CONCENTRATING BEAM
SAMPLE: SFDN#400MH-S = FLOODLIGHT 400W METAL HALIDE WITH SYMMETRIC OPTICAL BEAM Since 1961
66 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting Reference details
A
D
C
www.feam-ex.com
FLOODLIGHT TYPE
SFDN
150W HPNA
250W HPNA
400W HPNA
230V 50Hz
240V 50HZ
SM
AS
CT
150W MH
250W MH
400W MH
220V 60Hz
277 60Hz
B
0.206m˛
IK10
Ex nR II T3
Ex tD A22 IP 66 T200°C
A
II 3 GD
IMQ 09 ATEX 019
Tamb -20° C / +60° C
TOGLIERE TENSIONE PRIMA DI APRIRE
DO NOT OPEN WHILE ENERGIZED
0°
12
155
155
SFDN Polar diagrams – photometric data
SFDN#250HPNA-S
SFDN#250HPNA-A
SFDN#250HPNA-C
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 67
SFDN
SFDN Technical features
Ex Lighting SFDN
SFDN Polar diagrams – photometric data
SFDN#400MH-S
SFDN#400MH-A
SFDN#400MH-C
SFDN On request accessories
CODE
DESCRIPTION
20303.0099
PROTECTION GRID
20303.0100
POLE ADAPTER FOR DIA 40÷60MM
Protection grid
20303.0099
MATERIAL
ALUMINIUM
PAINTED STEEL
Pole adapter
20303.0100
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
68 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Explosion Proof Electrical Equipment
Weatherproof Lighting
EVSA
Installation: Safe Area Insulation Class: I
LIGHTING FIXTURE
CEI / EN
EXECUTION
INDUSTRIAL WEATHERPROOF
AMBIENT TEMPERATURE
-
PROTECTION DEGREE
IP65/66
CERTIFICATE REF.
-
RULES OF COMPLIANCE
EN 60598-1 + A1; EN 60598-2-1
Mechanical characteristics
Body
glass fibre reinforced polyester resin
Diffuser
U/V resistant polycarbonate - hinged to body
Safety closing
stainless steel hooks
Gaskets
EPDM 60 rubber suitable for high temperatures and resistant to enviroments conditions
Internal reflector
white stove enamelled sheet steel
Cable entry
complete with PVC cable gland
Electrical characteristics
Power supply
dual channel electronic ballast 110÷260V AC/DC 50/60Hz (cos ρ ≥ 0,98)
Lampholders
bi-pin G13 cap
Terminals
suitable up to 6 sq/mm cables
On Request Accessories:
• Pole mounting kit complete with stainless steel hardware
• Ceiling mounting kit complete with stainless steel hardware
• Pendant mounting kit complete with stainless steel hardware
• Wall/Structure mounting kit complete with stainless steel hardware
• Electronic ballast with voltage supply different than standard
• Emergency Group
• Up to 4 cable entries
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 69
EVSA
WEATHERPROOF FLUORESCENT
LIGHTING FIXTURES
Weatherproof Lighting
EVSA Technical data
EVSA
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE ENTRY
WITH CABLE
GLAND
EMERGENCY
UNIT
AUTONOMY
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 110V / 260V - 50/60Hz
EVSA118EL
1 x 18W
-
-
G13
2 x M20
-
-
A
EVSA136EL
1 x 36W
-
-
G13
2 x M20
-
-
A
EVSA158EL
1 x 58W
-
-
G13
2 x M20
-
-
A
EVSA218EL
2 x 18W
-
-
G13
2 x M20
-
-
A
EVSA236EL
2 x 36W
-
-
G13
2 x M20
-
-
A
EVSA258EL
2 x 58W
-
-
G13
2 x M20
-
-
A
EMERGENCY FLUORESCENT LIGHTING FIXTURES FOR SINGLE AND TWIN LAMPS - POWER SUPPLY 230V / 240V - 50/60Hz
EVSA118EL-E
1 x 18W
-
-
G13
2 x M20
4,8V - 4Ah
3h
A
EVSA136EL-E
1 x 36W
-
-
G13
2 x M20
4,8V - 4Ah
3h
A
EVSA158EL-E
1 x 58W
-
-
G13
2 x M20
4,8V - 4Ah
3h
A
EVSA218EL-E
2 x 18W
-
-
G13
2 x M20
4,8V - 4Ah
3h
A
EVSA236EL-E
2 x 36W
-
-
G13
2 x M20
4,8V - 4Ah
3h
A
EVSA258EL-E
2 x 58W
-
-
G13
2 x M20
4,8V - 4Ah
3h
A
EVSA Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
EVSA118EL
667
90
98
420
1,75
2 x M20
A
EVSA136EL
1276
90
98
775
2,45
2 x M20
A
EVSA158EL
1576
90
98
1070
3,10
2 x M20
A
EVSA218EL
667
155
102
455
2,10
2 x M20
A
EVSA236EL
1276
155
102
770
3,90
2 x M20
A
EVSA258EL
1576
155
102
1055
5,20
2 x M20
A
A [mm]
B [mm]
C [mm]
D [mm]
CODE
EVSA118EL-E
667
90
98
WEIGHT [Kg]
CABLE ENTRY
DETAIL
420
2,30
2 x M20
A
EVSA136EL-E
1276
90
98
775
3,00
2 x M20
A
EVSA158EL-E
1576
90
98
1070
3,60
2 x M20
A
EVSA218EL-E
667
155
102
455
2,60
2 x M20
A
EVSA236EL-E
1276
155
102
770
4,40
2 x M20
A
EVSA258EL-E
1576
155
102
1055
5,70
2 x M20
A
Reference details
A
C
D
A
B
Since 1961
70 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Weatherproof Lighting
EVSA Installation and mounting details
Ceiling mounting
Pendant mounting
type 2
Wall/structure mounting
type 3
type 4
00
EVSA
type 1
Pole mounting
Assemblig detail with pole (typical)
1
50
100
45°
EVSA Polar diagrams – photometric data
EVS118
EVS136
EVS158
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 71
Weatherproof Lighting
EVSA Polar diagrams – photometric data
EVS236
EVSA
EVS218
EVS258
EVSA On request accessories
CODE
DESCRIPTION
INSTALLATION
MATERIAL
TYPE 4
GALVANIZED STEEL
20302.0122
POLE MOUNTING KIT (SIZE 1 1/2” DIA.) C/W HARDWARE
20302.0123
POLE MOUNTING KIT (SIZE 2” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20302.0125
POLE MOUNTING KIT (SIZE 1” DIA.) C/W HARDWARE
TYPE 4
GALVANIZED STEEL
20301.0165
PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
STAINLESS STEEL
20303.0091
CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
GALVANIZED STEEL
20303.0095
WALL/STRUCTURE MOUNTING KIT C/W HARDWARE
TYPE 3
GALVANIZED STEEL
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
72 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Explosion Proof Electrical Equipment
Installation: Safe area Classification: I
Weatherproof Lighting
KAIROS
LIGHTING FIXTURE
CEI / EN
EXECUTION
INDUSTRIAL WEATHERPROOF
AMBIENT TEMPERATURE
-
PROTECTION DEGREE
IP66
CERTIFICATE REF.
-
RULES OF COMPLIANCE
CEI / EN 60598-1
Mechanical characteristics
Body
marine grade copper free aluminium (control gear & lamp body)
Globe
high-temperature resistant borosylicate glass
Painting
external epoxy powders grey ral-9006 colour
Screws
external stainless steel
Gaskets
silicon rubber
Cable Entry
1 threaded hole dia. 1" NPT (KAIROS-32LED)
2 threaded holes 3/4" (KAIROS-48LED)
Electrical characteristics
Alimentazione
Lamp type
Internal wiring
32W 120 or 230 or 277 Vac 700mA, frequency 50 ÷ 60Hz ± 5% (4 led)
48W 100-270 vac 700ma, frequency 50 ÷ 60hz ± 5% (6 led)
4 Led by 8w - minimum brightness 3500lm approx., led type “Cold-white” - EFFICIENCY > 83%
Equivalent to 400w incandescent lamp
6 Led by 8w - minimum brightness 5200lm approx., Led type “Cold-white” - EFFICIENCY > 83% Equivalent to 500w incandescent lamp
High-temperature resistant silicon rubber insulation cables
On Request Accessories:
•External painting colour on request
• Threaded cable entry different than standard
• For the other installations see bulletin 05 (EVAC 48-LED)
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 73
KAIROS
WEATHERPROOF LED LIGHTING
FIXTURES
KAIROS
KAIROS Technical data
CODE
POWER LAMP
TEMPERATURE
CLASS (GAS)
TEMPERATURE
CLASS (DUSTS)
LED
NUMBER
CABLE ENTRY
SIZE
POWER [W]
LIGHTING FIXTURES FOR LED LAMPS - POWER SUPPLY 90-264V 50/60Hz
KAIROS-32LED
POWER LED
-
-
4
32W
1 x 1/2" NPT
LIGHTING FIXTURES FOR LED LAMPS - POWER SUPPLY 100-270V Vac 700 mA 50/60Hz
KAIROS-48LED…
POWER LED
-
-
6
1 x 1” (pole mounting) 2 x 3/4” (universal bracket)
48W
KAIROS Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
weight [Kg]
KAIROS-32LED
210
100
176
240
4,50
2 x 3/4” A
KAIROS-48LED-W*
360
225
176
395
6,80
2 x 3/4" B
KAIROS-48LED-P*
400
225
176
-
6,80
1 x 1" C
*W= WALL - *P=POLE
FIGURA A FIGURA AFIGURA A FIGURA B FIGURA BFIGURA B
Reference details
B
C
1x1”
A
A
A
D
B
2x3/4”
D
B
DETAIL
FIGURA C FIGURA CFIGURA C
B
2x3/4” NPT
A
CABLE ENTRY
ØC
ØC
KAIROS Installation and mounting details
Wall/structure mounting
Ceiling mounting
270
3/4” NPT
120
3/4” NPT
3/4” NPT
3/4” NPT
315
3/4” NPT
3/4” NPT
3/4” NPT
271
3/4” NPT
REMARK: Due to the development of the national and international specifications and of the technology, the above technical
characteristics showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
74 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Explosion Proof Electrical Equipment
Weatherproof Lighting
SFDA
Installation : Safe Area Insulation Class : I
Concentrating
Asymmetric
Symmetric
FLOODLIGHT
CEI / EN
EXECUTION
INDUSTRIAL WEATHERPROOF
AMBIENT TEMPERATURE
-
PROTECTION DEGREE
IP66
CERTIFICATE REF.
-
RULES OF COMPLIANCE
EN 60598-1 + A1; EN 60598-2-5
Mechanical characteristics
Body
marine grade copper free aluminum
Diffuser
tempered front glass
Support
steel bracket with rotation-proof system
Reflector
anodized and polished 99,85 pure aluminum internal optic
Painting
thermosetting polyester powder resistant to atmospheric agents and corrosion grey RAL 9006 colour
Screws
stainless steel
Gaskets
pure silicon heat resistance
Cable entry
complete with cable gland
Internal optic
(S) symmetric optic - (A)asymmetric optic - (C) concentrating beam optic Electrical characteristics
Power supply
conventional ballast 230V - 50Hz (P.F. CORRECTED - cos ρ ≥ 0,95)
Lampholders
porcellain E40 size
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4 sq/mm cables
On Request Accessories:
•Control gear with voltage supply different than standard
•Threaded cable entry different than standard
•Ready for serial configuration through a second cable gland
•Internal optic definition under the symbol (S - A - C) to be added to the product code
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 75
SFDA
WEATHERPROOF FLOODLIGHTS
FOR DISCHARGE LAMPS
Weatherproof Lighting
SFDA
SFDA Technical data
CODE
LAMP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
SIZE
CABLE ENTRY
WITH CABLE
GLAND
DETAIL
FLOODLIGHT FOR HIGH PRESSURE MERCURY VAPOUR LAMP - POWER SUPPLY 230V 50Hz
SFDA#250HG-(1)
250 W -
-
E-40
1 x PCE M20
A
SFDA#400HG-(1)
400 W
-
-
E-40
1 x PCE M20
A
FLOODLIGHT FOR METAL HALIDE LAMP - POWER SUPPLY 230V 50Hz
SFDA#150MH-(1)
150 W
-
-
E-40
1 x PCE M20
A
SFDA#250MH-(1)
250 W -
-
E-40
1 x PCE M20
A
SFDA#400MH-(1)
400 W
-
-
E-40
1 x PCE M20
A
FLOODLIGHT FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V 50Hz
SFDA#150HPNA-(1)
150 W
-
-
E-40
1 x PCE M20
A
SFDA#250HPNA-(1)
250 W -
-
E-40
1 x PCE M20
A
SFDA#400HPNA-(1)
400 W
-
-
E-40
1 x PCE M20
A
(1) INTERNAL OPTICAL BEAM: (S) SYMMETRIC BEAM - (A) ASYMMETRIC BEAM - (C) CONCENTRATING BEAM
SAMPLE: SFDA#400MH-S = FLOODLIGHT 400W METAL HALIDE WITH SYMMETRIC OPTICAL BEAM SFDA Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE
ENTRY
DETAIL
SFDA#250HG-(1)
544
461
430
180
8,80
1 x PCE M20
A
SFDA#400HG-(1)
544
461
430
180
9,10
1 x PCE M20
A
SFDA#150MH-(1)
544
461
430
180
9,50
1 x PCE M20
A
SFDA#250MH-(1)
544
461
430
180
9,70
1 x PCE M20
A
SFDA#400MH-(1)
544
461
430
180
11,00
1 x PCE M20
A
SFDA#150HPNA-(1)
544
461
430
180
10,50
1 x PCE M20
A
SFDA#250HPNA-(1)
544
461
430
180
11,10
1 x PCE M20
A
SFDA#400HPNA-(1)
544
461
430
180
12,30
1 x PCE M20
A
(1) INTERNAL OPTICAL BEAM: (S) SYMMETRIC BEAM - (A) ASYMMETRIC BEAM - (C) CONCENTRATING BEAM
SAMPLE: SFDA#400MH-S = FLOODLIGHT 400W METAL HALIDE WITH SYMMETRIC OPTICAL BEAM Since 1961
76 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Weatherproof Lighting
Reference details
A
D
C
www.feam-ex.com
FLOODLIGHT TYPE
SFDA
SM
AS
CT
150W HPNA
250W HPNA
400W HPNA
150W MH
250W MH
400W MH
230V 50Hz
240V 50HZ
220V 60Hz
277 60Hz
B
0.206m˛
A
IK10
Tamb -20° C / +60° C
TOGLIERE TENSIONE PRIMA DI APRIRE
DO NOT OPEN WHILE ENERGIZED
0°
12
1 X PCE M20
155
155
SFDA Polar diagrams – photometric data
SFDA#250HPNA-S
SFDA#250HPNA-A
SFDA#250HPNA-C
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 77
SFDA
SFDA Technical features
Weatherproof Lighting
SFDA
SFDA Polar diagrams – photometric data
SFDA#400MH-S
SFDA#400MH-A
SFDA#400MH-C
SFDA On request accessories
CODE
DESCRIPTION
20303.0099
PROTECTION GRID
20303.0100
POLE ADAPTER FOR DIA 40÷60MM
Protection grid
20303.0099
MATERIAL
ALUMINIUM
PAINTED STEEL
Pole adapter
20303.0100
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics showed
on this bulletin can be considered as binding on our confirmation only.
Since 1961
78 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
LIGHTING FIXTURES FOR
DISCHARGE LAMPS
Explosion Proof Electrical Equipment
EWN
Installation: hazardous areas - Zone 2 (Gases) - Zone 22 (Dusts)
Classification: Group II - Category 3G 3D
LIGHTING FIXTURE
ATEX 94/9/EC
EXECUTION
AMBIENT TEMPERATURE
CERTIFICATE REF.
IN METRO
GOST-R
Ex nR IIC T3/T4 Gc Ex tc IIIC T200°C/T135°C Dc
Ex nR IIC T3/T4 Gc X Ex tc IIIC T200°C/T135°C Dc -40°C ÷ +60°C -40°C ÷ +60°C
-20°C ÷ +60°C -20°C ÷ +60°C IP66
IP66
IP66
IP66
IMQ 10 ATEX 032X
-
-
POCC IT. ME92.B02923
PROTECTION DEGREE
RULES OF COMPLIANCE
IEC Ex
3 G Ex nR IIC T3/T4 Gc Ex nR IIC T3/T4 Gc II 3 D Ex tc IIIC T200°C/T135°C Dc Ex tc IIIC T200°C/T135°C Dc
EN 60079-0; EN 60079-15; EN 60079-31;
IEC 60079-0:2007-10; ABNT NBR IEC 60079-0:2007-10; IEC 60079-1:2007-04; ABNT NBR IEC 60079-1:2007-04; IEC 61242-31:2008-11;
ABNT NBR IEC 61242-31:2008-11; ГОСТ Р МЭК 60079-0:2011; ГОСТ Р МЭК 61241-0:2007; ГОСТ Р МЭК 61241-1:2004; Mechanical characteristics
Body
marine grade copper free aluminium (control gear & lamp body)
globe
high-temperature resistant borosylicate glass
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
Electrical characteristics
Power supply conventional ballast 230v - 50hz (p.f.corrected - cos ρ ≥ 0,95)
lampholders
porcelain e27/e40 size
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 4 sq/mm cables
On Request Accessories:
•Ceiling mounting kit complete with stainless steel hardware
•Pendant mounting kit complete with stainless steel hardware
•Pole mounting 25° kit 1 1/2” dia. complete with stainless steel hardware
•Wall/Structure mounting kit complete with stainless steel hardware
•Galvanized steel wire protection guard
•Stainless steel wire protection guard
• White stove enamelled aluminium reflectors
• White stove enamelled aluminium reflectors inclined 30°
• Stainless steel AISI 316L reflectors
• External painting colour on request
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 79
EWN
Ex Lighting
Ex Lighting EWN Technical data
EWN
CODE
LAMP
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER SIZE
DETAIL
LIGHTING FIXTURE FOR HIGH PRESSURE MERCURY VAPOUR LAMP - POWER SUPPLY 230V 50Hz
EWN2-80HG
80 W
T4
T 135°C
E-27
A
EWN2-125HG
125 W T3
T 200°C
E-27
A
EWN3-250HG
250W
T3
T 200°C
E-40
A
EWN5-400HG
400 W
T3
T 200°C
E-40
A
LIGHTING FIXTURE FOR METAL HALIDE LAMP - POWER SUPPLY 230V 50Hz
EWN2-70MH
70 W T4
T 135°C
E-27
A
EWN2-100MH
100 W
T4
T 135°C
E-27
A
EWN2-150MH
150 W
T3
T 200°C
E-27
A
EWN3-175MH
175 W
T3
T 200°C
E-40
A
EWN3-250MH
250 W
T3
T 200°C
E-40
A
EWN5-400MH
400 W
T3
T 200°C
E-40
A
LIGHTING FIXTURE FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V 50Hz
EWN2-70HPNA
70 W
T4
T 135°C
E-27
A
EWN3-100HPNA
100 W
T4
T 135°C
E-27
A
EWN3-150HPNA
150 W
T3
T 200°C
E-40
A
EWN3-250HPNA
250 W
T3
T 200°C
E-40
A
EWN5-400HPNA
400 W
T3
T 200°C
E-40
A
EWN Technical features
CODE
A [mm]
B [mm]
C [mm]
Ø D [mm]
Ø E [mm]
WEIGHT [Kg]
DETAIL
EWN2
280
430
415
145
280
8,50
A
EWN3
280
510
480
190
402
9,50
A
EWN5
280
570
545
255
515
10,00
A
Reference details
A
C
B
ØA
ØD
ØE
Since 1961
80 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Ex Lighting EWN Installation and mounting details
Pendant mounting
type 1
3/4”
Pole mounting 25°
type 2
1”
Universal mounting inst. with adjustable bracket
type 3
45°
90
°
type 4
25°
EWN Polar diagrams – photometric data
EWN250HG-D
EWN400HPS-D
EWN400MH-D
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 81
EWN
Ceiling mounting
Ex Lighting EWN On request accessories
EWN
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20302.0070
EVAC 100 / 101 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0072
EVAC 300 / 301 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0073
EVAC 500 / 501 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0025
EVAC 100 / 101 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL AISI 316L
20302.0027
EVAC 300 / 301 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL AISI 316L
20302.0028
EVAC 500 / 501 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL AISI 316L
20302.0133
EVAC 100 / 101 SIZE STAINLESS STEEL REFLECTOR INCLINED 30°
WHITE STOVE ENAMELLED ALUM.
20302.0031
EVAC 300 / 301 SIZE STAINLESS STEEL REFLECTOR INCLINED 30°
WHITE STOVE ENAMELLED ALUM.
EVAC 500 / 501 SIZE STAINLESS STEEL REFLECTOR INCLINED 30°
WHITE STOVE ENAMELLED ALUM.
20302.0074
EVAC 100 / 101 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0076
EVAC 300 / 301 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0077
EVAC 500 / 501 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0037
EVAC 100 / 101 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL AISI 316L
20302.0039
EVAC 300 / 301 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL AISI 316L
20302.0040
EVAC 500 / 501 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL AISI 316L
20303.0108 2” DIA.SIZE POLE MONTING KIT C/W HARDWARE
TYPE 3
ALUMININIUM
20303.0107 1-1/2” DIA.SIZE POLE MONTING KIT C/W HARDWARE
TYPE 3
ALUMININIUM
20303.0106 1” DIA.SIZE POLE MONTING KIT C/W HARDWARE
TYPE 3
ALUMININIUM
20303.0103 PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
ALUMININIUM
20303.0102 CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
ALUMININIUM
20303.0105 UNIVERSAL MOUNTING INST. WITH ADJUSTABLE BRACKET C/W HARDWARE
tYPE 4
STAINLESS STEEL AISI 316L
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
82 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Explosion Proof Electrical Equipment
Weatherproof Lighting
EW
Installation: Safe Area Insulation Class: I
LIGHTING FIXTURE
CEI / EN
EXECUTION
INDUSTRIAL WEATHERPROOF
AMBIENT TEMPERATURE
-
PROTECTION DEGREE
IP66
CERTIFICATE REF.
-
RULES OF COMPLIANCE
EN 60598-1 + A1; EN 60598-2-1
Mechanical characteristics
Body
marine grade copper free aluminium (control gear & lamp body)
globe
high-temperature resistant borosylicate glass
painting
external epoxy powders grey ral-9006 colour
screws
external stainless steel
gaskets
silicon rubber
Electrical characteristics
Power supply conventional ballast 230v - 50hz (p.f.corrected - cos ρ ≥ 0,95)
lampholders
porcelain e27/e40 size
internal wiring
high-temperature resistant silicon rubber insulation cables
terminals
suitable up to 4 sq/mm cables
On Request Accessories:
•Ceiling mounting kit complete with stainless steel hardware
•Pendant mounting kit complete with stainless steel hardware
•Pole mounting 25° kit 1 1/2” dia. complete with stainless steel hardware
•Wall/Structure mounting kit complete with stainless steel hardware
•Galvanized steel wire protection guard
•Stainless steel wire protection guard
• White stove enamelled aluminium reflectors
• White stove enamelled aluminium reflectors inclined 30°
• Stainless steel AISI 316L reflectors
• External painting colour on request
• Control gear with voltage supply different than standard
• Threaded cable entry different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 83
EW
WEATHERPROOF LIGHTING
FIXTURES
Weatherproof Lighting EW Technical data
LAMP
EW
CODE
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER SIZE
DETAIL
LIGHTING FIXTURE FOR HIGH PRESSURE MERCURY VAPOUR LAMP - POWER SUPPLY 230V 50Hz
EW2-80HG
80 W
-
-
E-27
A
EW2-125HG
125 W -
-
E-27
A
EW3-250HG
250W
-
-
E-27
A
EW5-400HG
400 W
-
-
E-40
A
LIGHTING FIXTURE FOR METAL HALIDE LAMP - POWER SUPPLY 230V 50Hz
EW2-70MH
70 W -
-
E-27
A
EW2-100MH
100 W
-
-
E-27
A
EW2-150MH
150 W
-
-
E-27
A
EW3-175MH
175 W
-
-
E-40
A
EW3-250MH
250 W
-
-
E-40
A
EW5-400MH
400 W
-
-
E-40
A
LIGHTING FIXTURE FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V 50Hz
EW2-70HPNA
70 W
-
-
E-27
A
EW3-150HPNA
150 W
-
-
E-40
A
EW3-250HPNA
250 W
-
-
E-40
A
EW5-400HPNA
400 W
-
-
E-40
A
EW Technical features
CODE
A [mm]
B [mm]
C [mm]
Ø D [mm]
Ø E [mm]
WEIGHT [Kg]
DETAIL
EW2
280
430
415
145
280
8,50
A
EW3
280
510
480
190
402
9,50
A
EW5
280
570
545
255
515
10,00
A
Reference details
A
C
B
ØA
ØD
ØE
Since 1961
84 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Weatherproof Lighting EW Installation and mounting details
Pendant mounting
type 1
3/4”
Pole mounting 25°
type 2
1”
Universal mounting inst. with adjustable bracket
type 3
45°
90
°
type 4
25°
EW Polar diagrams – photometric data
EW250HG-D
EW400HPS-D
EW400MH-D
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 85
EW
Ceiling mounting
Weatherproof Lighting EW On request accessories
EW
CODE
DESCRIPTION
INSTALLATION
MATERIAL
20302.0070
EVAC 100 / 101 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0072
EVAC 300 / 301 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0073
EVAC 500 / 501 SIZE STANDARD REFLECTOR
WHITE STOVE ENAMELLED ALUM.
20302.0025
EVAC 100 / 101 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL AISI 316L
20302.0027
EVAC 300 / 301 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL AISI 316L
20302.0028
EVAC 500 / 501 SIZE STAINLESS STEEL REFLECTOR
STAINLESS STEEL AISI 316L
20302.0133
EVAC 100 / 101 SIZE STAINLESS STEEL REFLECTOR INCLINED 30°
WHITE STOVE ENAMELLED ALUM.
20302.0031
EVAC 300 / 301 SIZE STAINLESS STEEL REFLECTOR INCLINED 30°
WHITE STOVE ENAMELLED ALUM.
EVAC 500 / 501 SIZE STAINLESS STEEL REFLECTOR INCLINED 30°
WHITE STOVE ENAMELLED ALUM.
20302.0074
EVAC 100 / 101 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0076
EVAC 300 / 301 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0077
EVAC 500 / 501 SIZE STANDARD PROTECTION GUARD
GALVANIZED STEEL
20302.0037
EVAC 100 / 101 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL AISI 316L
20302.0039
EVAC 300 / 301 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL AISI 316L
20302.0040
EVAC 500 / 501 SIZE STAINLESS STEEL PROTECTION GUARD
STAINLESS STEEL AISI 316L
20303.0108 2” DIA.SIZE POLE MONTING KIT C/W HARDWARE
TYPE 3
ALUMININIUM
20303.0107 1-1/2” DIA.SIZE POLE MONTING KIT C/W HARDWARE
TYPE 3
ALUMININIUM
20303.0106 1” DIA.SIZE POLE MONTING KIT C/W HARDWARE
TYPE 3
ALUMININIUM
20303.0103 PENDANT MOUNTING KIT C/W HARDARE AND EYE-BOLTS
TYPE 2
ALUMININIUM
20303.0102 CEILING MOUNTING KIT C/W HARDWARE
TYPE 1
ALUMININIUM
20303.0105 UNIVERSAL MOUNTING INST. WITH ADJUSTABLE BRACKET C/W HARDWARE
tYPE 4
STAINLESS STEEL AISI 316L
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
86 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Explosion Proof Electrical Equipment
Installation: Safe area Classification: I
Weatherproof Lighting
STREET LED
LED LIGHTING FIXTURES
CEI / EN
EXECUTION
INDUSTRIAL WEATHERPROOF
AMBIENT TEMPERATURE
-
PROTECTION DEGREE
IP65
CERTIFICATE REF.
-
RULES OF COMPLIANCE
EN 60598-1+A1; EN 60598-2-1; EN 60598-2-3;
Mechanical characteristics
Body
die casting aluminium
Wiring plate
reinforced nylon
Painting
thermosetting polyester powder (grey ral-7039)
Protection glass
Tempered 4mm
Fixing holder
Suitable for ø60mm poles - adapter is required for ø40mm poles
Electrical characteristics
Power supply
electronic ballast 230V 50Hz (cos ρ ≥ 0,98)
Type lamp
LED Philips REBEL by 1W, integrated with asymmetric secondary lenses
Internal wiring
high-temperature resistant silicon rubber insulation cables
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 87
STREET LED
STREET LIGHTING FIXTURES WITH
LED LAMPS
STREET LED Technical data
CODE
TYPE LAMP
LIGHTING OUTPUT
DETAIL
weight [kg]
LED LIGHTING FIXTURES - POWER SUPPLY 230V-50Hz
STREET LED-24
24led x 1W
4800 lm
11,00
A
STREET LED-36
36led x 1W
7200 lm
11,00
A
STREET LED-48
48led x 1W
9600 lm
11,00
A
STREET LED-60
60led x 1W
12000 lm
11,00
A
Reference details
A
405,7
430
283,4
172
496
225
STREET LED
Weatherproof Lighting STREET LED Polar diagrams – photometric data
STREET LED
C Halfplanes
Gamma Angle
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics showed
on this bulletin can be considered as binding on our confirmation only.
Since 1961
88 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
STREET LIGHTING
FIXTURES
Explosion Proof Electrical Equipment
M400
Installation : Safe Area Insulation Class : I
LIGHTING FIXTURE
CEI/IEC
EXECUTION
INDUSTRial WEATHERPROOF
AMBIENT TEMPERATURE
IP66 (optic group) IP66 (control gear box) PROTECTION DEGREE
CERTIFICATE REF.
-
RULES OF COMPLIANCE
EN 60598-1 + A1; EN 60598-2-1; EN 60598-2-3
Mechanical characteristics
Body
die-cast aluminum
Diffuser
tempered glass 4mm thickness
Anchorage
cured poles Ø45-60mm (Ø40 with adapter)
Reflector
CUT-OFF optic - anodized and polished 99,85 pure aluminum
Painting
thermosetting polyester powder resistant to atmospheric agents and corrosion grey RAL 7038/7039 colour
Screws
stainless steel
Gaskets
silicon rubber gasket running oround the body
Cable entry
from pole
Electrical characteristics
Power supply conventional ballast 230V - 50Hz (P.F. CORRECTED - cos ρ ≥ 0,95)
Lampholders
porcellain E27 - E40 size
Internal wiring
high-temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4sq/mm cables
On Request Accessories:
• Electronic ballast with voltage supply different than standard
• Insulation class II
• Angle/wall installation bracket
• Pole adapter - dia. 40 mm
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 89
M400
Weatherproof Lighting
Weatherproof Lighting M400
M400 Technical data
CODE
TEMPERATURE CLASS
(GAS)
LAMP
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER SIZE
DETAIL
LIGHTING FIXTURE FOR HIGH PRESSURE MERCURY VAPOUR LAMP - POWER SUPPLY 230V 50Hz
M400-125HG
125 W -
-
E-27
A
M400-250HG
250 W
-
-
E-40
A
M400-400HG
400 W
-
-
E-40
A
LIGHTING FIXTURE FOR METAL HALIDE LAMP - POWER SUPPLY 230V 50Hz
M400-70MH
70 W
-
-
E-27
A
M400-100MH
100 W -
-
E-27
A
M400-150MH
150 W
-
-
E-27
A
M400-250MH
250 W
-
-
E-40
A
M400-400MH
400 W
-
-
E-40
A
LIGHTING FIXTURE FOR HIGH PRESSURE SODIUM LAMP - POWER SUPPLY 230V 50Hz
M400-70HPNA
70 W
-
-
E-27
A
M400-100HPNA
100 W -
-
E-40
A
M400-150HPNA
150 W
-
-
E-40
A
M400-250HPNA
250 W
-
-
E-40
A
M400-400HPNA
400 W
-
-
E-40
A
M400 Technical features
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
DETAIL
M400-125HG
719
228
387
224
10,20
A
M400-250HG
719
228
387
224
11,50
A
M400-400HG
719
228
387
224
12,90
A
M400-70MH
719
228
387
224
10,40
A
M400-100MH
719
228
387
224
10,40
A
M400-150MH
719
228
387
224
11,70
A
M400-250MH
719
228
387
224
11,70
A
M400-400MH
719
228
387
224
13,00
A
M400-70HPNA
719
228
387
224
10,50
A
M400-100HPNA
719
228
387
224
10,50
A
M400-150HPNA
719
228
387
224
11,70
A
M400-250HPNA
719
228
387
224
13,00
A
M400-400HPNA
719
228
387
224
14,30
A
CODE
Since 1961
90 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Weatherproof Lighting M400 Technical features
Reference details
M400
A
C
B
D
A
M400 Polar diagrams – photometric data
M400-250HG
M400-400HG
M400-250HPS
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 91
Weatherproof Lighting M400
M400 Polar diagrams – photometric data
M400-400Hps
M400-250MH
M400-400MH
M400 On request accessories
CODE
DESCRIPTION
20303.0099
ANGLE/WALL INSTALLATION BRACKET
20303.0100
POLE ADAPTER - DIA. 40÷60MM Angle/wall installation bracket
20303.0099
MATERIAL
ALUMINIUM
PAINTED STEEL
Pole adapter - dia. 40 mm
20303.0100
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
92 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
CEILING LIGHTING
FIXTURES
Explosion Proof Electrical Equipment
OFFICE
Installation: Safe Area
Insulation Class: I
LIGHTING FIXTURE
EXECUTION
INDOOR LIGHTING
AMBIENT TEMPERATURE
-
PROTECTION DEGREE
IP20 / IP40
CERTIFICATE REF.
-
RULES OF COMPLIANCE
EN 60598-1 + A1
Mechanical characteristics
Body
sheet steel
Optical diff
transparent methacrilate diffuser - white panted metal sheet frame
Optical par
“Darklight” - preanodised 99.85 aluminium double parabolic with 4u oxidation layer antiglare
and antiridescent
Painting
epoxy-polyester powder coated in white
Gasket
anti-age cellular structure
Electrical characteristics
Power supply
electronic ballast 220/240V 50/60Hz p.f. corrected (cos ρ ≥ 0,98)
Lampholders
bi-pin G13 cap
Internal wiring
high temperature resistant silicon rubber insulation cables
Terminals
suitable up to 4sq/mm cables
On Request Accessories:
•Electronic ballast with voltage supplì different than standard
•Emergency unit with charger and battery pack
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 93
OFFICE
Indoor Lighting
Indoor Lighting
LAMP
TYPE
CODE
TEMPERATURE
CLASS (GAS)
TEMPERATURE
CLASS (DUSTS)
LAMPHOLDER
CABLE ENTRY
DETAIL
FLUORESCENT LIGHTING FIXTURES WITH DARKLIGHT OPTICAL - POWER SUPPLY 230V-50Hz
-
G13
CABLE GLAND Ø20mm
A
-
G13
CABLE GLAND Ø20mm
A
-
G13
CABLE GLAND Ø20mm
A
G13
CABLE GLAND Ø20mm
A
G13
CABLE GLAND Ø20mm
A
G13
CABLE GLAND Ø20mm
A
OFFICE-PAR-136
1 x 36W
-
OFFICE-PAR-158
1 x 58W
-
OFFICE-PAR-218
2 x 18W
-
OFFICE-PAR-236
2 x 36W
-
-
OFFICE-PAR-258
2 x 58W
-
-
OFFICE-PAR-418
4 x 18W
-
-
FLUORESCENT LIGHTING FIXTURES WITH METHACRILATE DIFFUSER - POWER SUPPLY 230V-50Hz
OFFICE-DIFF-218
2 x 18W
-
-
G13
CABLE GLAND Ø20mm
A
OFFICE-DIFF-236
2 x 36W
-
-
G13
CABLE GLAND Ø20mm
A
OFFICE-DIFF-418
4 x 18W
-
-
G13
CABLE GLAND Ø20mm
A
OFFICE Technical features
CODE
A [mm]
B [mm]
C [mm]
FIXING [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
OFFICE-(1)-136
1225
180
90
1023 x 90
3,80
CABLE GLAND Ø20mm
A
OFFICE-(1)-158
1525
180
90
1323 x 90
4,90
CABLE GLAND Ø20mm
A
OFFICE-(1)-218
618
306
90
414 x 130
3,30
CABLE GLAND Ø20mm
A
OFFICE-(1)-236
1225
306
90
1023 x 130
6,20
CABLE GLAND Ø20mm
A
OFFICE-(1)-258
1525
306
90
1323 x 130
8,00
CABLE GLAND Ø20mm
A
OFFICE-(1)-418
618
610
90
414 x 496
5,70
CABLE GLAND Ø20mm
A
(1) OPTICAL / DIFFUSER: PAR = DARKLIGHT - DIFF= TRANSPARENT METHACRILATE
Reference
details
A
C
OFFICE
OFFICE Technical data
A
OFFICE-PAR-218
OFFICE-PAR-236
B
OFFICE-PAR-418
REMARK: Due to the development of the national and international specifications and of the technology, the above technical
characteristics showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
94 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Explosion Proof Electrical Equipment
Weatherproof Lighting
KRONOS SAT
Installation: safe area
Insulation class: I
INDUSTRIAL REFLECTORS
CEI / EN
EXECUTION
WEATHERPROOF
AMBIENT TEMPERATURE
-
PROTECTION DEGREE
IP65
CERTIFICATE REF.
-
RULES OF COMPLIANCE
EN 60598-1 + A1; EN 60598-2-5
Mechanical characteristics
Housing
die-casting aluminium complete with stainless steel safety chains
Diffuser
plane tempered glass resistant to shocks and thermal shocks, coupled with stainless steel clips and secured with a security chain
Painting
thermosetting polyester powder resistant to atmospheric agents and corrosion
Reflector
anodized and polished 99,85 pure aluminum
Cable entry
cable gland M20 IP68 tear proof
Electrical characteristics
Power supply
conventional ballst 230V - 50Hz p.f. corrected (cos ρ ≥ 0,95)
Lampholders
ceramic E27 / E40
Internal wiring
1,5sq/mm silicon cables with glass sheat
On Request Accessories:
•Galvanized steel wire protection guard
•Electronic device for aux halogen lamp
•Control gear with voltage supply different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 95
KRONOS SAT
INDUSTRIAL REFLECTORS
FOR DISCHARGE LAMPS
KRONOS SAT Technical data
LAMP
TYPE
CODE
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE GLAND
DETAIL
INDUSTRIAL REFLECTORS FOR MERCURY VAPOUR LAMPS - POWER SUPPLY 230V-50Hz
KRONOS-125MBF
125 W -
-
E-27
M20
A
KRONOS-250MBF
250 W -
-
E-40
M20
A
KRONOS-400MBF
400 W
-
-
E-40
M20
A
INDUSTRIAL REFLECTORS FOR METAL HALIDE LAMPS - POWER SUPPLY 230V-50Hz
KRONOS-150JM
150 W -
-
E-27
M20
A
KRONOS-250JM
250 W
-
-
E-40
M20
A
KRONOS-400JM
400 W
-
-
E-40
M20
A
INDUSTRIAL REFLECTORS FOR HIG PRESSURE SODIUM LAMPS - POWER SUPPLY 230V-50Hz
KRONOS-150SAP
150 W -
-
E-40
M20
A
KRONOS-250SAP
250 W
-
-
E-40
M20
A
KRONOS-400SAP
400 W
-
-
E-41
M20
A
KRONOS SAT Technical features
Reference details
KRONOS-125MBF
535
265
550
295
4,62
M20
A
KRONOS-250MBF
535
265
550
295
5,03
M20
A
KRONOS-400MBF 535
265
550
295
6,35
M20
A
KRONOS-150JM
535
265
550
295
5,22
M20
A
KRONOS-250JM
535
265
550
295
5,17
M20
A
KRONOS-400JM
535
265
550
295
6,50
M20
A
KRONOS-150SAP
535
265
550
295
5,22
M20
A
KRONOS-250SAP
535
265
550
295
6,57
M20
A
KRONOS-400SAP
535
265
550
295
7,76
M20
A
KRONOS-400MBF
A
ØD
B
A
B
ØC
ØD WEIGHT
CABLE GLAND DETAIL
[mm] [mm] [mm] [mm] [Kg]
CODE
A
KRONOS SAT
Weatherproof Lighting ØC
KRONOS-250SAP
KRONOS-400JM
KRONOS SAT On request accessories
CODE
DESCRIPTION
MATERIAL
930000.480 PROTECTION GRID Ø480
GALVANIZED STEEL
CLA
-
ELECTRONIC SWITCHING DEVICE FOR AUXILIARY LAMP
REMARK: Due to the development of the national and international specifications and of the technology, the above technical
characteristics showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
96 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Explosion Proof Electrical Equipment
Weatherproof Lighting
GENIUS
Installation: safe area
Insulation class: I
LIGHTING FIXTURE
CEI / EN
EXECUTION
INDUSTRIAL WEATHERPROOF
AMBIENT TEMPERATURE
-40°C ÷ +70°C
PROTECTION DEGREE
IP66
CERTIFICATE REF.
-
RULES OF COMPLIANCE
EN 60598-1 + A1; EN 60598-2-1
Mechanical characteristics
Body & frame
seamless AISI-3104 stainless steel one piece deep drawn
Diffuser
transparent tempered flat glass 5mm thick. with silicon rubber gasket
Screws
stainless steel
Gaskets
EPDM rubber suitable for high temperatures and resistant to enviroments conditions
Reflector
internal in die-fold steel, epoxy powders white coloured coated equiped with security strings
Cable entry
PG 13,5 complete with poliamyde cable gland
Closing hooks
stainless steel with screw-held spring lock latches and anti-vandal device
Electrical characteristics
Power supply
electronic ballast 230V - 50/60Hz p.f. corrected (cos ρ ≥ 0,98)
Lampholders
bi-pin G13 cap
Terminals
suitable up to 4sq/mm cables
On Request Accessories:
• Pole mounting kit complete with stainless steel hardware
• Pendant mounting kit complete with stainless steel hardware
• Wall/structure mounting kit complete with stainless steel hardware
• Emergency unit complete with inverter charger and Ni-Cd 4,8V 4A/h battery pack
• Electronic ballast with voltage supply different than standard
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 97
GENIUS
LIGHTING FIXTURES FOR
FLUORESCENT TUBE LAMPS
Weatherproof Lighting CODE
LAMP TYPE
TEMPERATURE CLASS
(GAS)
TEMPERATURE CLASS
(DUSTS)
LAMPHOLDER
CABLE
ENTRY
EMERG.UNIT
AUTONOMY
(ON REQUEST) (EMERG.UNIT)
DETAIL
FLUORESCENT LIGHTING FIXTURES FOR SINGLE, TWIN, AND THREE LAMPS - POWER SUPPLY 230V-50/60Hz
GENIUS-118
1 x 18W
-
-
G13
1 x PG 13.5
4,8V - 4A/h
3h
A
GENIUS-136
1 x 36W
-
-
G13
1 x PG 13.5
4,8V - 4A/h
3h
A
GENIUS-158
1 x 58W
-
-
G13
1 x PG 13.5
4,8V - 4A/h
3h
A
GENIUS-218
2 x 18W
-
-
G13
1 x PG 13.5
4,8V - 4A/h
3h
A
GENIUS-236
2 x 36W
-
-
G13
1 x PG 13.5
4,8V - 4A/h
3h
A
GENIUS-258
2 x 58W
-
-
G13
1 x PG 13.5
4,8V - 4A/h
3h
A
GENIUS-318
3 x 18W
-
-
G13
1 x PG 13.5
4,8V - 4A/h
3h
A
GENIUS-336
3 x 36W
-
-
G13
1 x PG 13.5
4,8V - 4A/h
3h
A
GENIUS Technical features
CODE
A [mm]
B [mm]
C [mm]
D [mm]
WEIGHT [Kg]
CABLE ENTRY
DETAIL
GENIUS-118
700
220
90
480
12,50
1 x PG 13,5
A
GENIUS-136
1310
220
90
1090
15,50
1 x PG 13,5
A
GENIUS-158
1610
220
90
1390
18,50
1 x PG 13,5
A
GENIUS-218
700
220
90
480
13,00
1 x PG 13,5
A
GENIUS-236
1310
220
90
1090
16,00
1 x PG 13,5
A
GENIUS-258
1610
220
90
1390
19,00
1 x PG 13,5
A
GENIUS-318
700
220
90
1090
13,50
1 x PG 13,5
A
GENIUS-336
1310
220
90
1390
16,50
1 x PG 13,5
A
Reference details
A
D
1 x PG 13,5
C
GENIUS
GENIUS Technical data
B
A
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics showed
on this bulletin can be considered as binding on our confirmation only.
Since 1961
98 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Explosion Proof Electrical Equipment
Installation: hazardous areas - Zone 1/2 (Gases) - Zone 21/22 (Dusts) - Safe Area
Ex Lighting
towers
LIGHTING MASTS WITH MOBILE CROWN FOR EXPLOSION PROOF FLOODLIGHS EEx d IIB T3 IP65
The utility of the high masts with mobile crown in lighting large areas,
is universally recognised. It , in fact, represents the best answer either
from the lighting environmental, maintenance point of view.
Lighting high masts undertakes an irreplaceable part in designing
modern lighting plant of large areas, having the approval of engineers
who consider more and more difficult to find personnel for carrying
out maintenance, disposed to climb to a certain height. Furthermore,
the possibility of lighting large areas (interchanges, parking areas etc....)
with few lighting sources of considerable height, without particular
maintenance costs, makes FEAM high masts with mobile crown
particularly profitable in the economy of the whole plant.. Our actual
range, designed in standard elements suitable to guarantee maximum
safety levels, with explosion proof floodlights for zone 1 and zone 2.
MOVEMENT DETAIL
motor cruck
LIGHTING STUDY ON REQUEST
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 99
МАЧТЫ И ОПОРЫ
HIGH MAST TOWERS & LIGHTING
POLES FOR HAZARDOUS AREA
МАЧТЫ И ОПОРЫ
Ex Lighting
Lighting poles
Installation: hazardous areas - Zone 2 (Gases) - Zone 22 (Dusts) - Safe Area
POLES
LIGHTING COLUMNS FOR EXPLOSION PROOF CONNECTION BOX, LIGHTING FIXTURES AND FLOODLIGHTS
Designed and manufactured according to national and European standard, FEAM lighting columns, are manufactured in 3 different types:
• Conical columns with circular section
• Stepped columns from welded tubes
• Columns with octagonal and polygonal section
Normally provided with standard works for the electric wiring according to the standard, they may be personalised with particular works upon
request. Furthermore a complete range of accessories such as brackets, cross arms, make them suitable to the most different needs.
All columns are protected against corrosion by means of hot galvanisation.
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
100 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
FASTENING ACCESSORIES,
LIGHTING POLES
Ex Lighting
ACCESSORIES
Installation:hazardous areas - Zone 1 / 2 (Gases)
Zone 21 /22 (Dusts) - Safe Area
U-Bolts
Clamp
Poles
POLES Technical features
A [mm]
B [mm]
ØC [mm]
ØD
R
MATERIAL
DETAIL
PAL041
CODE
1900
1650
1-1/2”
-
500
GALVANIZED STEEL
A
PAL042
500
1650
1-1/2”
-
500
GALVANIZED STEEL
A
PAL855
2700
1650
2-1/2”
1-1/2”
500
GALVANIZED STEEL
D
PAS043
700
-
1”
-
250
GALVANIZED STEEL
B
PAS856
3000
500
2-1/2”
1”
250
GALVANIZED STEEL
C
PAS857
2000
700
1-1/2”
1”
250
GALVANIZED STEEL
C
Other poles are supplied according to customer’s request
Materials: stainless steel on request
Reference details
B
C
ØD ØØDD
D
ØD
R
R
30°
30°
A
A
ØD
ØC
ØC
ØC ØC
A
A
A
FIGURA
FIGURA
A AA
FIGURA A FIGURA
R RR
A
A
A
ØC ØC
ØC
R
R RR
A
A
ØC
30°
45° 4455°°
45°
R
B
B
B
R RR
ØD
ØD
30°
30°
30°
R
ØD
ØDØD
A
B
B
B
R
ØD
A
ØD ØØDD
B
B
ØD
B
A
ØC
ØC ØC
ØC
FIGURA
FIGURA
B BB
FIGURA B FIGURA
ØC
ØC ØC
ØC
FIGURA
FIGURA
C CC
FIGURA C FIGURA
FIGURA
FIGURA
D DD
FIGURA D FIGURA
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 101
ACCESSORI
Explosion Proof Electrical Equipment
CLAMP Technical features
Reference details
CODE
Ø CONDUIT
R
MATERAL
DETAIL
GF1
1/2”
10
GALVANIZED STEEL
E
GF2
3/4”
12
GALVANIZED STEEL
E
GF3
1”
15
GALVANIZED STEEL
E
GF4
1-1/4”
20
GALVANIZED STEEL
E
GF5
1-1/2”
22,5
GALVANIZED STEEL
E
GF6
2”
27,5
GALVANIZED STEEL
E
GF7
2-1/2”
35
ALUMINUM
E
GF8
3”
45
ALUMINUM
E
GF10
4”
60
ALUMINUM
E
E
R
U-BOLTS Technical features
Reference details
CODE
Ø CONDUIT
R
MATERAL
DETAIL
GH1
1/2”
10
GALVANIZED STEEL
F
GH2
3/4”
12
GALVANIZED STEEL
F
GH3
1”
15
GALVANIZED STEEL
F
GH4
1-1/4”
20
GALVANIZED STEEL
F
GH5
1-1/2”
22,5
GALVANIZED STEEL
F
GH6
2”
27,5
GALVANIZED STEEL
F
GH7
2-1/2”
35
GALVANIZED STEEL
F
GH8
3”
45
GALVANIZED STEEL
F
GH10
4”
60
GALVANIZED STEEL
F
F
R
ACCESSORI
Ex Lighting
With nuts and washer Materials: stainless steel on request
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics showed
on this bulletin can be considered as binding on our confirmation only.
Since 1961
102 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY
Installation: hazardous areas - Zone 1 / 2 (Gases)
Zone 21 / 22 (Dusts) - Safe Area
Explosion Proof Electrical Equipment
Ex Lighting
LIGHTING
CALCULATION
Lighting layout software for internal and external areas available by our office lighting calculation service for lighting
installation to right and best position of luminaires in your project.
Our technical staff offers its services in planning lighting installation, with photometric graphs and lighting data outputs in full according
to Customer requirements.
A well-organized software system is available to calculate the luminance level and the lighting distribution.
This system will help you to plan the right and best position of FEAM luminaries in your project. It is enough you to inform us about the
required illumination level: FEAM will present you the lighting project quickly.
Using a proper software , our technical staff is able to insert FEAM lighting fixtures into a project and produce a virtual image of the area,
which shows the real illuminating effect.
Lighting calculation of example
Since 1961
YOUR PARTNER FOR SAFETY
Feam Catalogue 03 - 103
CALCOLO
ILLUMINOTECNICO
LIGHTING CALCULATION FOR
EXTERNAL AND INTERNAL AREAS
CALCOLO
ILLUMINOTECNICO
Ex Lighting
Lighting calculation examples
REMARK:
Due to the development of the national and international specifications and of the technology, the above technical characteristics
showed on this bulletin can be considered as binding on our confirmation only.
Since 1961
104 - Feam Catalogue 03
YOUR PARTNER FOR SAFETY