840 contacts. 1 terminal strip
and two power buss strips.
2 5/8" x 6 7/8" x 3/8” high
CAT# PB-840
$7.65 each
1680 contacts. 2 terminal strips, 4 buss
strips, 3 binding posts mounted on an
aluminum back plate 5 1/8" x 6 7/8" x
3/8” high.
CAT# PB-1680
$15.95 each
JUMPER WIRE SETS
Pre-formed jumper wires
for use with solderless
breadboards. 14 color-coded
lengths. AWG 22 solid wire.
Unbreakable clear plastic storage case.
140 PIECE ASSORTMENT
10 of each size
25 of each size
3260 contacts. 4 terminal strips,
7 buss strips, 4 binding posts
mounted on an aluminum
back plate 7 7/8" x 8 3/4” x
3/8” high.
CAT# PB-3260
$32.00 each
POWERED BREADBOARD
Features:
DC power supplies:
5Vdc @ 1.5 Amp fixed
0-15Vdc @ 500mA adjustable
0-15Vdc @ 500mA adjustable
Input: 120/ 240Vac @50-60Hz
Overload & short-circuit protection.
Detachable AC power cord.
10.75" x 8.75" x 3.25". 6 lbs.
$138.00 each
BREADBOARD POWER SUPPLY
YwRobot, MB-V2 is a module that plugs
into our solderless breadboards
(except CAT# PB-170) and
provides 5V or 3V power to the rails.
Also provides an on-off switch, power
indicator LED, a USB port and extra header pins for
3V and 5V power taps. Maximum output current:
700mA. Coax jack (2.1mm id) for power input. Requires a 6.5 - 9 Vdc power supply. 32 x 54 x 25mm
(1.26 x 2.08 x 0.86" h.).
CAT# MB-PS
$6.75 each
TEST CLIPS FOR BREADBOARDS
ALLIGATOR CLIP JUMPER WIRE
Alligator clip to machine pin
jumper. 6" long leads. Six piece
set. For use with solderless
breadboards, SIP and
DIP headers.
CAT# TL-14
$5.95 per set
MINI GRABBER JUMPER WIRE
Red and Black mini-grabber to
machine pin jumper. 7" long
leads. Two piece set. For use
with solderless breadboards,
SIP and DIP headers.
CAT# TL-15
$4.50 per set
72
$ 6.25 each
CAT # JW-350
$ 12.95 each
JUMPER WIRE, 10 PACKS
male
female
Simplify projecting and prototyping with this triple-output
power supply and solderless
2420 tie point breadboard.
1 fixed and 2 adjustable
supplies, 5 bus strips and
3 plug-in strips for DIP and
other components.
CAT# PB-4060
CAT # JW-140
350 PIECE ASSORTMENT
Machine pins for easy insertion and extraction.
Can be reused many times without distortion of pin.
Color-coded by length. AWG24. Sold in packs of 10.
50MM (2”) Brown wire
Male-Male
CAT# JMM-50
Male-Female
CAT# JMF-50
Female-Female CAT# JFF-50
$3.00 / 10 pcs
$3.00 / 10 pcs
$3.00 / 10 pcs
70MM (2.75”) Gray wire
Male-Male
CAT# JMM-70
Male-Female
CAT# JMF-70
Female-Female CAT# JFF-70
$3.20 / 10 pcs
$3.20 / 10 pcs
$3.20 / 10 pcs
100MM (4”) Orange wire
Male-Male
CAT# JMM-100
Male-Female
CAT# JMF-100
Female-Female CAT# JFF-100
$3.35 / 10 pcs
$3.35 / 10 pcs
$3.35 / 10 pcs
150MM (6”) Purple wire
Male-Male
CAT# JMM-150 $3.60 / 10 pcs
200MM (8”) Blue wire
Male-Male
CAT# JMM-200
Male-Female
CAT# JMF-200
Female-Female CAT# JFF-200
$3.75 / 10 pcs
$3.75 / 10 pcs
$3.75 / 10 pcs
BATTERY HOLDER FOR BREADBOARDING
Holds 3 AA batteries for
4.5Vdc power. Completely
enclosed with slide-off cover.
Integrated On-Off switch on holder.
6” leads with machined male pins
for use with solderless breadboards.
2.69” x 1.90” x 0.72”.
CAT# BH-AA3
$3.95 each
TEST CABLES & CLIPS
ECONOMY TEST LEADS
Red and black lead set with
banana plug on one end & pin
probe on other end. 3 ft. long.
CAT# TL-100
$2.50 per set
TEST LEADS WITH
PIN PLUGS
Set of red and black test leads
with pin plugs. 22" long cables.
CAT# TL-112
$1.85 set
FAX YOUR ORDER 24 HOURS A DAY (818) 781-2653