40LC Zinc plated steel chain with aluminium cover Inner height (D) 104,5 mm W SL C 11 Bright Zinc Plated Steel Cable Chain with aluminium cover and the quote C can be in special size. Available it can be done in Stainless steel. 10 Separator 11 D - Unassembled - Assembled Part.no S310TCF9 Part.no S310TCF9MC B 29 Aluminium Draw Plates with nylon separators W mm 208 258 308 358 458 558 C+58 Technical characteristics when self-supported 4 Speed 0,5 m/s Acceleration 2 m/s2 For higher requirements please consult our technical dept. B C D R Weight/m Chain mm mm mm mm kg Part Number 145 150 104,5 250-300-350-400-450-500-550-600-700-750-850 22,47 40LC150 * 145 200 104,5 250-300-350-400-450-500-550-600-700-750-850 23,84 40LC200 * 145 250 104,5 250-300-350-400-450-500-550-600-700-750-850 25,20 40LC250 * 145 300 104,5 250-300-350-400-450-500-550-600-700-750-850 26,56 40LC300 * 145 400 104,5 250-300-350-400-450-500-550-600-700-750-850 29,28 40LC400 * 145 500 104,5 250-300-350-400-450-500-550-600-700-750-850 31,01 40LC500 * 145 .... 104,5 250-300-350-400-450-500-550-600-700-750-850 40LC ** *Complete the code by inserting the value of the radius (R): Ex. 40LC150 2 5 0 **Complete the code by inserting the value of the quote C and the radius (R): Ex. 40LC 1 2 3 2 5 0 N LS LS 2 R 180 M H LS LS 2 MOVING POINT M1 350 FIXED POINT 180 Length of chain (L) Half travel distance ( LS ) 2 plus length of curve (M) or (M1) L= LS + M or M1 2 216 N1 R R mm 250 300 350 400 450 500 550 600 700 750 850 1000 H* mm 650 750 850 950 1050 1150 1250 1350 1550 1650 1850 2150 N mm 510 555 605 655 710 755 805 855 955 1010 1105 1255 M mm 1150 1305 1460 1620 1780 1930 2090 2245 2560 2720 3030 3500 N1 mm 1545 1755 1950 2125 2295 2455 2605 2755 3035 3170 3430 - M1 mm 3285 3790 4265 4715 5150 5570 5975 6375 7155 7535 8280 - * The height H should be increased by 10 mm/m approx. because of preload. In case of limitation to the available space, refer to the Technical Dptm. ® NE CH W AIN Self-Supporting Capacity Diagram Bright Zinc Plated Steel End Brackets The maximum length of the self-supporting capacity in relationship to the weight of the cables and hoses contained per linear metre. The end brackets set, containing four steel plates screwed to the links allows the two ends of the chain to be attached to the equipment. (L) 40LC Zinc plated steel chain with aluminium cover 500 400 300 200 150 Additional load (kg/m) 60 40 20 10 8 6 4 3 2 1 0 1 2 3 4 5 6 7 4 Fig. A Chain fixed outer radius (Fig A) See mounting variations page 31 8 9 10 11 12 13 LS Max unsupported 2 length (m) 180 LS 160 LS 2 75 15 The red marking in the diagram area considers the difference of weight between various widths of chain. 90 Suitable to long travel distance See page 233 25 30 F2 F1 L For applications with and weights not included in the area of the diagram showing self-supporting capacity, verify the possible use of support rollers (see page 30). Catena tipo 40LC150 40LC200 40LC250 40LC300 40LC400 40LC500 F1 mm 135 185 235 285 385 485 F1=W-73 F2=W-64 F2 mm 144 194 244 294 394 494 Supplementary movable separators. Bright Zinc Plated Steel Type Part Numbers Complete Set Assembled Chain End Brackets Type Set 40LC A40LCKM * Complete Set Unassembled Chain End Brackets Type Set 40LC A40LCK * ** 1=Pos.1; 2=Pos.2; 3=Pos.3 Mount Variant page 31 For further information please consult Brevetti Stendalto’s Technical Office 217