LSL-4x-xx
Festoon
features
• Low Voltage Xenon Lamp
• Pre-assembled Sockets
• Field Termination
• Optional Dimming
• Customized Lamp Spacing
24V - 5W or 10W Xenon Lamp
Clear or Frosted Finish
application
• Back Lighting
• Cove Lighting
• Under Cabinet
• Display Case
• Furniture Lighting
SPECIFICATIONS
Lighting
Lamp
Diagrams - Dimensions
5W or 10W Xenon lamp
Warm white
2800K
Colour
Festoon Xenon Lamp - LSL-4x-xx
43 mm
1-11/16”
1500K
Ø 11 mm
Ø 7/16”
Festoon Linear Strip - LSL-xx-24V
23 mm
15/16”
50 mm
2”
29 mm
1-3/16”
Sample application
8000K
3000K
Avg Life
5W lamp - 10,000 hr
10W lamp - 5,000 hr
Lumen Output
5W lamp - 50 lm
10W lamp - 120 lm
Efficacy
5W lamp - 10 lm/W
10W lamp - 12 lm/W
Electrical
Input Voltage*
24V AC
Dimming
Low voltage transformer
Magnetic dimming switch
Max Power
450 W
19 A Rated - 15 A Recommended
Operating Temp
-20°C to 40°C
High ambient temperature will shorten LED life
Circuit
Paralled Wired Sockets
*Do not plug directly to 120V
Mechanical
Housing Construction
Pre-stamped Sockets 12 AWG Copper Wire
Bend Radius
76.2 mm (3”)
Weatherability
Indoor Only
Spacing & Lengths
Lamp Spacing
Lamps per length
5W Xenon
Max Run Length*
10W Xenon
Max Run Length**
63.5 mm
(2.5”)
16 lamps/m
(5 lamps/ft)
4.4 m
(14.4 ft)
2.2 m
(7.2 ft)
76.2 mm
(3”)
13 lamps/m
(4 lamps/ft)
5.5 m
(18 ft)
2.7 m
(9 ft)
101.6 mm
(4”)
10 lamps/m
(3 lamps/ft)
7.3 m
(24 ft)
3.6 m
(12 ft)
152.4 mm
(6”)
6 lamps/m
(2 lamps/ft)
11 m
(36 ft)
5.5 m
(18 ft)
304.8 mm
(12”)
3 lamps/m
(1 lamps/ft)
22 m
(72 ft)
11 m
(36 ft)
*Maximum number of 72 lamps per run (5W Xenon)
**Maximum number of 36 lamps per run (10W Xenon)
Solid State Lighting is sensitive to power fluctuations
Surge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failure
Lack of surge protection will void your warranty
LSL-4x-xx - Page 1 Specifications subject to change without notice
111 - 8838 Heather St. Vancouver BC Canada V6P 3S8 • Ph: 1-604-874-4405 Fx: 1-604-321-0445 • www.bllighting.com • sales@bllighting.com
LSL-4x-xx
Dimming Option - Wiring Diagram
Magnetic Dimming Transformer to Festoon Light
Dimmer
Power Supply
24V AC
Dimming
Transformer
Ground
120V AC Black (+)
White (-)
120V AC Black (live)
120V AC White (neutral)
Ground
Festoon Light
277V AC
Orange (live)
24V AC Blue (-)
White 24V AC Red (+)
Black +
*Reverse the Dimmer’s black wire wiring to flip switch control upside down
Accessories
LSL-7
End Cap
L 30 mm x W 22 mm x H 11 mm
(L 1-3/16” x W 15/16” x H 7/16”)
LSL-9
Terminal Block
L 54 mm x W 38 mm x H 35 mm
(L 2-1/8” x W 1-1/2” x H 1-3/8”)
LSL-3
Mounting Clips
L 32 mm x W 12.7 mm x H 3.2 mm
(L 1-1/4” x W 1/2” x H 1/8”)
LSL-ALCHAN
Aluminum Track with Arcylic Cover
L 2.5 m x W 38 mm x H 32 mm
(L 96” x W 1-1/2” x H 1-1/4”)
LSL-8
Light Reflecting Plate
ordering
Festoon Strip
LSL- Lamp Spacing 24V
2.5”
3”
4”
6”
12”
Festoon Lamp
LSL Lamp Wattage
4A
4B
Finish
Clear
Frosted
Accessories
LSL-7
LSL-8
LSL-9
Mounting
LSL-3
LSL-ALCHAN
Transformer
SBxx-xx
CExx-xx
BLMAG-xx-xx
Solid State Lighting is sensitive to power fluctuations
Surge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failure
Lack of surge protection will void your warranty
LSL-4x-xx - Page 2 Specifications subject to change without notice
111 - 8838 Heather St. Vancouver BC Canada V6P 3S8 • Ph: 1-604-874-4405 Fx: 1-604-321-0445 • www.bllighting.com • sales@bllighting.com