MultiLINQ
DC Power Splitter
Model RHPS267
Special Features
•
•
•
•
•
•
•
•
•
•
MultiLINQ generates four NEC Class 2 rated
constant voltage outputs from a single DC input
Microprocessor controlled protection circuitry
Low dissipation control (>98% efficient)
IP67 Rated
Wide Input Voltage Operation
Input Reverse Polarity Protection
Blue POWER OK LED and Red FAULT LED
Auxiliary Fault alarm
Long Life, Low Cost
Patent Pending
Indications:
Red = Fault
Blue = Pwr
Designed and made in Italy
Y
X
Multiple Patents Pending
Outputs:
Quantity 4
FAULT
Type: Class 2 - Isolated
Input:
6-28V
Red = (+)
Black = (-)
MultiLINQ
DC power splitter
Model 267
External 25A max
rated fuse required
IP67
Suitable for Wet Locations
6-28V
CH1
Pout Max = 100VA
CH2
Iout Max = 5A
for Vin<20V
CH3
Iout Max = 100/Vin
for Vin > 20V
CH4
100VA DC Output
100VA DC Output
400VA DC Feed
100VA DC Output
100VA DC Output
Applications and Benefits
MiltiLINQ is designed for powering low voltage light fixtures that require a Class 2 limited power input. It is
ideal for installations requiring multiple Class 2 power sources such as:
•
Commercial Lighting
•
Residential Lighting
•
Signage
MultiLINQ generates multiple Class 2 constant voltage outputs, replacing low power AC-DC power supplies in
the end product. The following diagram depicts a typical installation utilizing the MultiLINQ:
Class 2 Wiring
LED Light Strip/Rope/Module
LED Light Strip/Rope/Module
•
•
LED Light Strip/Rope/Module
•
MultiLINQ
Junction
Box
LED Light Strip/Rope/Module
LED Light Strip/Rope/Module
•
•
•
•
•
Class 1
DC Power Feed
From Remote
Power Source
Removes AC power from fixtures
Reduces total quantity of
AC-DC power supplies
Reduces total material and
installation cost
Reduces maintenance costs
Simplifies installations
Simplifies certification process
Smaller and lighter then the AC-DC
power supplies it replaces
Increases system reliability
Input and Output Specification
Input Voltage:
6VDC to 28VDC from a
Class 1, SELV Source
Input Current:
20ADC Maximum
Isolation:
500VDC input and output
to chassis
Output Voltage:
Follows input voltage within 200mV
Output Rating:
100VA per channel at >20VDC
Output current limited to 5A maximum
per channel at<20VDC
MultiLINQ
DC Power Splitter
Model RHPS267
Mechanical
Enclosure:
Plastic, watertight assembly
Dimensions (LxWxH):
126.3mm x 55.5mm x 37.0mm (4.97” x 2.20” x 1.46”)
Input Connection:
Flying leads, 12AWG, 300mm long
Output Connections:
Screwless Terminal Block
Outline Drawing:
Printed circuit terminal block
L
L
N° 2 WIRES AWG 12
L=300 mm
RECESSED CAVITY FOR LABEL
LED POSITION
Environmental
Operating Temperature:
-30C to +65C
Storage Temperature:
-40C to +85C
Cooling:
Convection cooled
Ingress Protection:
IP67
Suitable for wet locations
Safety Agency Approvals
UL60950 Listed in accordance with Low Power System (LPS) requirements. Equivalent to NEC Class 2.
Roal Electronics, S.p.A. may change product specifications and accordingly the information presented in this document. Customers are responsible for
their products and applications using Roal Electronics, S.p.A. products. Roal Electronics, S.p.A. assumes no liability from the use of its products outside
of specifications. No license is granted to any intellectual property rights by this document. ROAL ELECTRONICS, S.P.A. DISCLAIMS ALL
REPRESENTATIONS AND WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Eu and RoW
ROAL Electronics S.p.A
Via Jesina 56/A
60022 – Castelfidardo (AN) - Italy
Tel:+39 071 721461
Fax:+ 39 071 72146 480
North America
www.roallivingenergy.com
ROAL Electronics USA, Inc.
701, Main St. Suite 405
Stroudsburg, PA18360
Phone: + 1 570 421 5750
Fax: +1 570 421 5687
DS1_Multilinq_Rev02- Pag. 2/2