CC-3G
eyeheight
Multi-rate (270M/1.5G/3G) colour correction
module.
08/12
Overview
This unit is a simple cost effective colour correction system which will give individual control of R,G and B Gains,
Lifts and gamma. The system also inherently legalises the signal enabling the user to make full use of the colour
correction without fear of the resulting picture being rejected by broadcasters.
In addition to the standard features the system also includes an integrated safe area generator and split screen
showing processed and unprocessed picture. An indication of crushed (over limit) areas can also be displayed.
Multiple colour correction channels can be networked to multiple panels enabling very flexible installation options.
Block diagram detail
control
video
R
PVW
Split screen and safe
area generator
Correction
table
HD
SD
BNC
R
Indicate
clip
IN
HD
SD
BNC
Convert
to RGB G
Correction
table
B
Correction
table
G
OUT 1
RGB
Legaliser
HD
SD
BNC
HD
SD
BNC
OUT 2
B
IN
OUT 1 OUT 2 PVW X
Simple RS232 protocol to recall user setups
RS232
RJ45
Control panel
GAIN
UTILITIES
LIFT
MEMORIES
GAMMA
SETUP
R
G
B
Master
Gain=1.00
Gain=1.00
Gain=1.00
Gain=1.00
A
B
C
D
Menu
R
G
A
B
B M
Adjust
C
D
canaletto
by eyeheight
The control panel is very simple to use and can switch between up to 16 colour correction channels.
The panel is 1RU and can be remotely sited or fit on the front of an FB-9E chassis. Connection to
the chassis uses standard CAT5 ethernet cabling.
www.eyeheight.com
telephone: +44(0)20 8255 2015
CC-3G
eyeheight
Multi-rate (270M/1.5G/3G) colour correction
module.
Key features
Description
— Multirate colour correction system with operational control panel
Features
— Full 10 Bit Processing throughout. (16 bit internal).
— Simple individual control of RGB and master Gain and Lift.
— Selectable master or individual RGB gamma control with overall luma, chroma gain, hue rotation and black level
adjustment.
— Gamut legalisation as standard with EBU R103-2000 setup mode. User adjustable legalisation parameters are
also provided (Equivelent to a full eyeheight RGB legaliser with overshoot suppression).
— Preview output shows split screen of processed and unprocessed picture as well as clipped (crushed) areas and
includes a safe area generator.
— 6 User memories.
— Firmware and software fully updatable by file upload.*
— Mechanical relay bypass option available.
— Optional web based java soft panel and specific "web app" available.*
Formats
§1080i/50/59.94, 1080p 23.976/24/25/29.97/50/60, 720p/50/59.94, 625/50, 525/59.94
§3G SMPTE 425 Level A, 1080p 50/60/59.84
*Not available on MX-9 chassis
System implimentation
Further chassis
Physical Implimentation
CC-2 #1
FB-9E ETHERBOX CHASSIS
PANEL
I-BUS
232/422
ETHNET
GPI 2
CC-2 #3
GPI 1
I-BUS
CC-2 #4
CC-2 #2
GAIN
UTILITIES
LIFT
MEMORIES
GAMMA
SETUP
GAIN
UTILITIES
LIFT
MEMORIES
GAMMA
SETUP
CC-2 #5
R
G
D
A
B
R
G
A
B
R
G
B
Master
Gain=1.00
Gain=1.00
Gain=1.00
Gain=1.00
A
B
C
Menu
R
G
B
Master
Gain=1.00
Gain=1.00
Gain=1.00
Gain=1.00
A
B
C
D
Menu
CC-2 #6
CAT5
(ethernet)
cabling
B M
Adjust
C
D
canaletto
by eyeheight
B M
Adjust
C
D
canaletto
by eyeheight
Up to 16 channels of colour corrector and 8 panels can be networked.
Further Panels
www.eyeheight.com
CC-3G
Multi-rate (270M/1.5G/3G) colour correction
module.
eyeheight
Chassis view
PANEL
I-BUS
232/422
ETHNET
GPI 2
GPI 1
Slot 1
Slot 3
Slot 5
Slot 2
Slot 4
Slot 6
The CC-3G is plug in module for the etherbox FB-9E 1RU chassis. The basic unit takes ONE slot enabling a
density of 6 units per 1RU.
Module connections
IN
OUT 1A
OUT 1B
PVW
x
RS232
1xMain input
2xMain colour corrector outputs.
1x preview (split screen) output.
1x RS232 to recall presets
Chassis connections
PANEL
I-BUS
232/422
ETHNET
GPI 2
GPI 1
The card connections are supplemented by the FB-9E chassis connections which provides GPI inputs and outputs,
an Ethernet connection which can be used for browser based chassis monitoring and optional Java control
applications and an RS-232/422 automation interface.(Not available on the MX-9 chassis)
www.eyeheight.com
CC-2
eyeheight
Multi-rate colour correction module
Ordering information
The CC-2C is operated by an FP-9C colour corrector control panel (Please note that it cannot be operated by a
normal FP-9). This module is also available in genetics mode as a CC-2 which can be controlled by the FP-9
generic control panel (But not the FP-9C) . An SD only version as well as a multi rate version (SD and HD) are also
available.
Order code format (Module):
CC-3cX-R-J
c If the unit will be operated by an FP-9C colour corrector panel. (Leave blank if an FP-9 is to be used)
X should be S for SD-SDI only version or M for multi-rate (SD-HDI/HD-SDI) or G to also include 3G data rate (3G
and SD-SDI and HD-SDI) version.
R optional mechanical relay bypass from input to output A. (Leave blank for no relay bypass).
J optional Java web soft panel control license. (ONLY available for CC-2 NOT for CC-2C)
For example:
CC-2c-M is a CC-3G module for use with an FP-9C control panel. The unit is HD/SD.
www.eyeheight.com
RoHS
Compliant