Product technical data. 03-04-2013
LED POWER FIBRE 19 WHITE CONTROL 48W IP20
WHITE MONOCHROME / WHITE MIX
19 LED monochrome 48W in 700mA
Warm white 2700K / Warm white 3000K / Neutral white 4000K / Cold white 6500K.
Description :
Controlled 19 power LED illuminator : DMX / DALI / FLUX BUS.
Lighting features :
Monochromes 19 LED, 48W in 700mA.
Focusing lens for 19 LED : Fibre&Led©.
Colours : Warm white 2700K ( IRC 80 ) ; Warm white 3000K ( IRC 80 ) ; Neutral white 4000K ( IRC 80 ) ; Cold white 6500K ( IRC 70 ).
WHITE MIX : Warm white ; Neutral white ; Cold white.
LED lifetime : 70,000 hours to 70% of the luminous.
Optic connection :
Compatible with all FLUX common ends, held by screws.
Electrical features :
Class 1. 50-60Hz. 700mA integrated power supply (equivalent to 100W halogen).
IEC HO5VVF 2P+T power cable length : 1,5m. Protections : thermal ; by fuse.
Controlled with DMX. Input and output XLR plugs. Connector 2 pts DALI. Switch 5 positions.
Maximum ambient temperature : 35°C. Minimum airy volume for installation 0,3m³.
Mechanical features :
IP20. 960°. Black painted aluminum grained box. Weight : 4kg.
Photo & Sketches (mm)
2700K
WHITE MIX
1- IEC male plug
2- Protection fuse
3- ON/OFF switch
4- XLR male & female plugs
5- Connector 2 pts DALI
6- 5 position
rotary switch :
DMX / DALI / ZONE1 /
ZONE 2 / ZONE 3
1 2 3
4
5
3000K
4000K
250
6500K
280
123
130
6
Connection in parallel (ex.)
PARALLEL
Parallel connection.
In a parallel connection, each element is connected to the
voltage source by 2 wires. (phase, neutral and ground).
Illuminator
230VAC
The company reserve the right to change technical specifications for all the products according to the research and product development advances.
www.flux-lighting.com
LED POWER FIBRE 19 WHITE CONTROL 48W IP20
WHITE MONOCHROME / WHITE MIX
Light output : Lm/W
Codes
Typicals values* given as an indication
Designation
Colours
Nb. LED
Lm / Product
Lm / Watt
LED POWER FIBRE 19 LED 700mA
Warm white
19
3618
76
LED POWER FIBRE 19 LED 700mA
Neutral white
19
3618
76
LED POWER FIBRE 19 LED 700mA
Cold white
19
4199
88
*FLUX uses the latest generation of LED ; performance Lm / W can be improved.
Illuminator WHITE CONTROL details
CONNECTIONS
Avoid any traction on cable when connecting. The tightness must be performed on the cable sheath and not on drivers.
INSTALLATION LED LUMINAIRES
1 - Comply with the maximum current.
2 - Refer to the mode of connection : in parallel.
3 - Respect the maximum lengths of cable in order to avoid voltage drops and interferences.
4 - Comply with the specified operating temperature. Minimum ventilation (natural) and heat dissipation needed for a good working
order. Not confine the illuminator, provide around a minimum space of 20cm.
5 - For a correct use of LED luminaires, it is very important to consider the thermal environment to which the product will be installed.
6 - A controlled thermal regulation of the various LED luminaires can provide reliable and optimal operation.
19 LED CONTROL illuminator 700mA warm white 2700K
Warm white 2700K
104-0340
LED Qty.
19 LED CONTROL illuminator 700mA warm white 3000K
Warm white 3000K
104-0115
LED Qty.
19 LED CONTROL illuminator 700mA neutral white 4000K
Neutral white 4000K
104-0120
LED Qty.
19 LED CONTROL illuminator 700mA cold white 6500K
Cold white 6500K
104-0125
LED Qty.
19 LED CONTROL illuminator 700mA WHITE MIX
White Mix
104-0130
LED Qty.
19
19
19
19
19
W
48W
W
48W
W
48W
W
48W
W
23W
The company reserve the right to change technical specifications for all the products according to the research and product development advances.
www.flux-lighting.com