i-DOWN 12 350mA 15W IP20 WHITE MIX / RGB MIX / LED MIX FOR

advertisement
Product technical data. 15-05-2013
i-DOWN 12 350mA 15W IP20
WHITE MIX / RGB MIX / LED MIX FOR SHOP
12 Monochromatic power LED
WHITE MIX / RGB MIX / LED MIX FOR SHOP
RGB MIX
WHITE MIX
Sketch (mm)
Description :
Power LED downlight, adjustable +/- 25°, for indoor lighting.
Lighting features :
12 monochromatic power LED 1W.
Optics : 2x10° ; 2x15° ; 2x22,5°.
Colours : RGB MIX ( red, green et blue ) ; WHITE MIX (Warm white, neutral white, cold white) ; LED MIX FOR SHOP ( It’s possible to
choose LED colours on request ).
LED lifetime : 60,000 hours to 70% of the luminous.
Electrical features :
Class III. Wiring in series on 350mA power supply.
CAT5 cable with RJ45 connectors L. : 2m.
Maximum ambient temperature : 35°C.
Dimmable and controlled with a PILOTBOX 350mA.
Ø147
120
120
60
Mechanical features :
IP20. IK08. 650°. Aluminium flange, natural anodized or white. Spring-fixing. Drilling Ø : 156mm.
Option(s) :
Customization. Cable, extention, RJ45 connectors.
1,50
20°
Ø171
Wiring in series
SERIAL
Series connection.
In serie connection, luminaires are wired one to another,
Only the first luminaire (phase) and the last one (neutral)
are connected to the voltage source.
230V AC
Phase
Neutral
PRODUCT
POWER SUPPLY +
48V
CAUTION
In RJ45 wiring, always close the line
+
+R +G +B
RJ45
PILOTBOX 350mA
DIP
SWITCH
DMX CONTROL
SIGNAL
Photo
Ø156
CUSTOMIZE
Optics : 2x10° / 2x15° / 2x22,5°
GND
1
DMX IN
+ 2 3
DMX OUT
+ 5 6
GND
4
BP-POT
DALI
7 8 9 10
11 12 13
DMX cable normalized :
Masse : grey cable (braided shield)
L + : red cable
N - : white cable
Next PILOTBOX 350mA
The company reserve the right to change technical specifications for all the products according to the research and product development advances.
www.flux-lighting.com
i-DOWN 12 350mA 15W IP20
WHITE MIX / RGB MIX / LED MIX FOR SHOP
Downlights installation
Codes
i-DOWN 12 WHITE MIX / RGB MIX / LED MIX FOR SHOP 350mA
VENTILATION / DISSIPATION
- Do not cover with insulating elements ( fibreglass... ).
- Provide minimum ventilation area around the luminaire.
min. 50
- IP20 products are not suitable for outdoor ( porch roof ; covered playground ).
2x10°
- Cutting roof is indicated +/- 2mm tolerance.
2x15°
2x22,5°
- Power supply support : Opening to fixate a secure cable and RJ45 cable.
Insulating
Elements
min. 100
Ventilation area (mm)
min. 50
min. 100
Connection & fixing
Safety cable (not delivered)
RJ45 cable (delivered)
Insulating
Elements
min. 100
min. 100
Safety cable (not delivered)
POWER & CONSUMPTION
Caution : Indicated Output Power (W) is LED output without power supplies, components & power factor (Cos φ), in case of large
RJ45 cable (delivered)
quantity of luminaires on installation, consult us.
CONNECTIONS
Avoid any traction on cable when connecting.
INSTRUCTIONS
1 - Observe the usual precautions when connecting.
2 - Refer to the mode of connection : series.
3 - Comply with the specified operating temperature. Minimum ventilation (natural) and heat dissipation needed for a good working
order. Not confine the luminaire.
4 - For a correct use of LED luminaires, it is very important to consider the thermal environment to which the product will be installed.
5 - A controlled thermal regulation of the various LED luminaires can provide reliable and optimal operation.
POWER SUPPLIES
Power supplies recommanded are specialized for LED luminaires and are in conformity with : NF EN 61347-2-13. - Lamp
controlgear. - Part 2-13 : Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (index : C71247-13).
i-DOWN 12 350mA RGB MIX
Finish
Alu.
White
2x10°
535-0050
535-0150
2x15°
535-0055
535-0155
2x22,5°
535-0060
535-0160
Weight
1,1kg
1,1kg
W
15W
15W
i-DOWN 12 350mA WHITE MIX
Finish
Alu.
White
2x10°
535-0065
535-0165
2x15°
535-0070
535-0170
2x22,5°
535-0075
535-0175
Weight
1,1kg
1,1kg
W
15W
15W
The company reserve the right to change technical specifications for all the products according to the research and product development advances.
www.flux-lighting.com
i-DOWN CONFIGURATION
Description :
The configurator allows you to customize the interior i-DOWN LED range : the holder (optic support) and the front.
1. HOLDER : 6 choices
B
W
G
R
O
P
2. FRONT : 2 choices
B
W
B : Black
W : White
G : Green
R : Red
O : Orange
P : Purple
Possible combinations : 2 letters affixed to the product code.
BB : Holder Black / Front Black
GB : Holder Green / Front Black
OB : Holder Orange / Front Black
BW : Holder Black / Front White
WB : Holder White / Front Black
WW : Holder White / Front White
GW : Holder Green / Front White
RB : Holder Red / Front Black
RW : Holder Red / Front White
OW : Holder Orange / Front White
PB : Holder Violet / Front Black
PW : Holder Violet / Front White
Cables & RJ45 connectors
BAB RJ45 connectors : end to end
Y RJ45 connector
RJ45 extention
Accessories
Designation
CAT5 RJ45 cable for IP20 LED luminaire - L.0.30m
CAT5 RJ45 cable for IP20 LED luminaire - L.2m
CAT5 RJ45 cable for IP20 LED luminaire - L.5m
CAT5 RJ45 cable for IP20 LED luminaire - L.10m
Y connector for RJ45 cable with male plugs
BAB (end to end) connector for RJ45 cable with male plugs
Codes
530-9005
530-9010
530-9015
530-9020
530-9025
530-9030
The company reserve the right to change technical specifications for all the products according to the research and product development advances.
Download