15300 RTMR
PDM
Power distribution
Series 15300 RTMR
Rear Terminal Mini Fuse & Relay
The Rear Terminal Mini Fuse and Relay panel (RTMR) provides efficient power
distribution in a rugged compact form for applications in marine, construction,
agriculture, heavy trucking, specialty vehicles, etc. This innovative product
offers a weather tight enclosure (IP66) for various MINI (2.8mm) blade
components when cover, cable seals, and cavity plugs are installed. It is
available with various degrees of internal electrical bussing. Additionally,
custom labels and multiple hardware configurations are available to solve any
application need.
Torque Rating: 50 in-lbs (5.5Ntm) max.
Mounting Torque Rating: #10-32 or M5 threaded inserts;
24 in-lbs (2.7Ntm) max torque.
Ingress Protection Rating: IP66-IEC 60529 (Valid when
properly installed with cover, sealed terminals, and cavity
plugs.)
Options
Specifications
Input Terminal Rating: M6 input studs on bussed/partially bussed inputs: 80A
max input on bussed fuse side, 80A max input on bussed relay side.
Output Terminal Rating: 2.8mm blade terminals (30A max per terminal)
Temperature Rating: -40°C (-40°F) to 125°C (260°F) (rating on PDM only)
Materials: Black thermoplastic housing; Tin-plated copper internal bussing;
Bright nickel-plated brass studs (on bussed versions).
Termination: Delphi Packard Metri-Pack® 280 Series terminals
(sealed/tangless).* Delphi Packard 280 Series cavity plugs are installed where
wires are not used.* Accepts #12-22 AWG wire sizes.
End Caps: Protective silicone end caps available for
studded versions.
Mounting: Mounting brackets available for surface-mounting
RTMR. (See page 41.)
Labels: Consult factory for custom label options.
Replacement Accessories: Consult factory for available
service parts.
Cover Marking: Laser etching on inside, outside, or both
*Electrical terminals, cable seals & cavity plugs are NOT supplied by
Eaton
Ω Controls and Power Conversion Division
www.cooperbussmann.com/CPCD
Series 15300 RTMR
Dimensions - mm(in)
(Dims. shown are for reference only. Consult factory for latest prints)
75.0
(2.95)
112.8
(4.44)
Power distribution
THREADED INSERT
15303-3 #10-32 INSERT
15304-4 M5 X 0.8 INSERT
34.6
(1.36)
86.0
(3.39)
60.3
(2.37)
62.8
(2.47)
106.3
(4.19)
90.6
(3.57)
105.4
(4.15)
25.0
(.98)
59.3
(2.33)
GORE AUTOMOTIVE
VENT USED WITH
FUSE COVER ONLY
73.3
(2.89)
RELAY/C.B.
COVER
SHOWN
FUSE
COVER
SHOWN
PDM
TANGLESS FEMALE TERMINAL
DELPHI PACKARD
280 METRI-PACK SERIES
12 GA. TO 20 GA.
(SEE NOTE 1)
CABLE SEAL
DELPHI PACKARD
280 METRI-PACK SERIES
(SEE NOTE 1)
BOTTOM VIEW
1530X-4-X-X
WIRED BASE
(NO POWER BUSS)
BOTTOM VIEW
1530X-2-X-X
1530X-3-X-X
MICRO/MINI BASE
BOTTOM VIEW
1530X-1-X-X
FUSE BASE
SEAL CONNECTOR PLUG
DELPHI PACKARK
PART NO. 12010300
(SEE NOTE 1)
STUD CAPS
(OPTIONAL)
ISOMETRIC VIEW
SCALE: 1:1
NOTES:
1. OUTPUT TERMINALS, CABLE SEALS AND SEALED CONNECTOR
PLUGS ARE NOT PROVIDED BY COOPER BUSSMANN.
2. MOUNTING: THREADED INSERTS (#10-32 UNF) or (M5 X 0.8)
24 IN/LBS MAX TORQUE. INPUT STUDS M6 X 1 50 IN/LBS. MAX.
3. HOUSING: 94VO THERMOPLASTIC.
4. INTERNAL BUSSING: TIN PLATED COPPER.
5. DIMENSIONS PROVIDED ARE FOR REFERENCE ONLY.
6. IP RATING: IP67 PER IEC 529. VALID WHEN COVER AND SEALED
TERMINALS AND SEALED CONNECTOR PLUGS ARE PROPERLY
INSTALLED. IN ORDER TO MAINTAIN A IP67 RATING IT IS
RECOMMENDED THAT THE CUSTOMER PERIODICALLY APPLY A
HEAVY DUTY SILICONE LUBRICANT (ie: CRC #05074 OR EQUAL)
TO THE RTMR HOUSING GASKET.
7. TERMINAL REMOVAL TOOL: DELPHI PART NO. 12094430.
Series 15300 RTMR
HEX NUTS
(OPTIONAL)
BOTTOM VIEW
1530X-6-X-X
WIRED BASE
(RELAY SIDE BUSS)
BOTTOM VIEW
1530X-5-X-X
WIRED BASE
(FUSE SIDE BUSS)
Part Numbering System
Series
1 5
Mounting
Hardware
Options
Base Options
–
3 0
Cover
Options
Marking
Options
–
3 - #10-32 Insert (English
1 - Fuse/C.B. Base (For 20 Fuses/C.B.)
0 - No Nuts
0 - No Cover
Special Labels
4 - M5x0.8 Insert (Metric)
2 - Micro Relay Base (For 5 Micro Relays W/ 10 Fuses/C.B.)*
1 - Nuts (Shipped Bulk)
3 - Fuse Cover
Consult Factory
3 - Mini Relay Base (For 3 Mini Relays W/10 Fuses/C.B.)*
2 - Nuts (Shipped Assembled)
4 - Relay/c.b. Cover
4 - Wired Base (Non Bussed) (No Input Studs) (For Fuses/C.B. And Relays)
2 - Nuts (Shipped Assembled)
5 - Wired Base (Input Stud Fuse Side Only) (For Fuses/C.B. And Relays)
3 - Stud Caps (Shipped Bulk)
6 - Wired Base (Input Stud Relay Side Only) (For Fuses/C.B. And Relays)*
4 - Stud Caps (Shipped Assembled)
*Input stud bussed to pin 86 on relay
5 - Nuts And Stud Caps (Shipped Bulk)
6 - Nuts And Stud Caps (Shipped Assembled)
RTMR Stud End Cap
B 0 6 6
–
Mounting Brackets
7 0 0 8
B 0 2 8
Material
7 0 1 2
Latch Position Assurance
––
–
1 5 3 0 0
O – Plated steel
P– Stainless steel
www.cooperbussmann.com/CPCD
Ω Controls and Power Conversion Division
L P
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Eaton:
15303-4-0-4