412034.H01 REDDOT 5/7
5/8/03
9:54 AM
Page H1
Conduit Bodies, Covers and Gaskets. . . . . H2-H5
Mogul Pulling Elbow/Service
Entrance Bodies. . . . . . . . . . . . . . . . . . . H6-H8
Zinc Concrete Slab Inserts,
Elbows and Plugs . . . . . . . . . . . . . . . . . H9-H11
Industrial Vaportight Lighting . . . . . . . . . H12-H16
Cross Reference . . . . . . . . . . . . . . . . . . . . . . H17
Dry-tite Universal Boxes . . . . H18-H20, H23-H24
®
Dry-tite Single Gang Covers . . . . . . . . . . . . . H21
®
Dry-tite Two Gang Covers . . . . . . . . . . . . . . H22
®
Code Keeper . . . . . . . . . . . . . . . . . . . . . . . . H25
®
Code-Keeper Wet Location Covers . . . . H26-H28
®
Weatherproof Covers –
While-In-Use Applications. . . . . . . . . . . . . . H29
Dry-tite Round Boxes, Extensions
and Covers. . . . . . . . . . . . . . . . . . . . . H30-H32
®
Dry-tite Lampholders, Garden Lights
and Accessories . . . . . . . . . . . . . . . . . H33-H38
®
SiteLight Overview . . . . . . . . . . . . . . . . . . . . H39
®
SiteLight Lampholders, Garden
Lights and Accessories . . . . . . . . . . . . H40-H47
®
D-Pak Merchandising System . . . . . . . . H48-H50
®
Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H51
H
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H2
Conduit Bodies, Covers & Gaskets
ALB
ALL
BT
Applications:
• Junction for branch conduits
- “A” Series bodies for Rigid and IMC conduit maintain a weather
resistant conduit system when used with covers and gaskets.
- “B” Series bodies for thin wall conduit (EMT) saves cost of
connector and labor in indoor applications.
• Spacious, accessible wiring chamber provides a convenient
location to pull conductors and make splices.
• Aluminum conduit bodies can be used with steel rigid conduit NEC 346-1, and Steel EMT, NEC 348-1.
Red•Dot
®
H
Features/Benefits:
•
•
•
•
Copper-free* aluminum provides increased corrosion resistance.
Precision cast and machined surfaces permit safer wire pulling.
Clean cover edges provide good gasket sealing.
Precision NPT threaded and set screw hubs allow trouble-free
field installation for rigid, IMC or EMT conduit.
• Retained deep slotted stainless steel cover screws for faster
installation.
• Clear UL, CSA and cubic content markings speed approval by
inspectors.
Clean cover
edges
Copper-free
aluminum
Smooth
conduit
stops
Standard Materials:
• Conduit Bodies: Die cast aluminum alloy A360 with less than
.004 copper content (copper-free).
• Covers: (CV Series) Die cast aluminum alloy A360 with less than
.004 copper content (copper-free), and stainless steel screws.
• Covers: (SCV Series) Stamped aluminum alloy with less than
.004 copper content (copper-free), and stainless steel screws.
• Gaskets: (GKN Series) Neoprene.
• Gaskets: (GKV Series) Composition.
Clear
markings
Standard Finish:
• Conduit bodies and die cast covers: Aluminum lacquer finish.
• Stamped covers: Natural.
Compliances:
•
•
•
•
Retained
deep slotted
stainless
steel screws
UL Listed.
CSA Certified.
Federal Spec. W-C-586.
NEC Article 370-28.
Precision
machined
threads
Sample Specifications:
• Conduit bodies shall be die cast copper-free* aluminum alloy
A360. All conduit stops shall be free of rough edges.
Conduit bodies shall be finished with powder coated paint.
Conduit bodies shall be Red•Dot Catalog No. _______________
*Less than .004 copper content
®
H2
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H3
Conduit Bodies, Covers & Gaskets
Threaded bodies for heavy wall rigid and IMC.
Set screw bodies for thin wall conduit (EMT).
Through Feed
Cat. No.
Cat. No.
Rigid/IMC
AC-1-RD
AC-2-RD
AC-3
AC-4-RD
AC-5
AC-6-RD
AC-7•
AC-8•
AC-9•
AC-10-RD•
EMT
BC-1
BC-2
BC-3
BC-4
BC-5
BC-6
D-PAK *
DAC-1-CG†
DAC-2-CG†
DAC-3-CG†
• Retained stainless steel cover screws.
• Cubic capacity UL and CSA clearly shown.
• Smooth throats for easy wire pulling.
• Ultra-high pressure die cast copper-free aluminum.
• UL Listed, CSA Certified.
Hub Size
d"
f"
1"
1b"
1d"
2"
2d"
3"
3d"
4"
Cat. No.
AE-1
AE-2
Left/Right
Side Opening
Rigid/IMC
ALRL-19
ALRL-29
ALRL-39
ALRL-49
ALRL-59
ALRL-69
T-Style
AT-1
BT-1
d"
AT-2
AT-3
AT-4
AT-5
AT-6
AT-7•
AT-8•
AT-9•
AT-10•
BT-2
BT-3
BT-4
BT-5
BT-6
f"
1"
1b"
1d"
2"
2d"
3"
3d"
4"
d"
f"
1"
1b"
1d"
2"
2d"
3"
3d"
4"
DBLB-1-C9
DBLB-2-C9
DBLB-3-C9
d"
f"
1"
1b"
1d"
2"
BLL-1
BLL-2
BLL-3
d"
f"
1"
1b"
1d"
2"
2d"
3"
3d"
4"
®
Left Side Opening
ALL-1
ALL-2
ALL-3
ALL-4
ALL-5
ALL-6
ALL-7•
ALL-8•
ALL-9•
ALL-10•
D-PAK *
DALL-1-CG†
DALL-2-CG†
DALL-3-CG†
Right Side Opening ALR-1
ALR-2
ALR-3
ALR-4
ALR-5
ALR-6
ALR-7•
ALR-8•
ALR-9•
ALR-10•
D-PAK *
DALR-1-CG†
DALR-2-CG†
DALR-3-CG†
d"
f"
1"
1b"
1d"
2"
2d"
3"
3d"
4"
H
®
DAT-1-CG†
DAT-2-CG†
DAT-3-CG†
d"
f"
1"
Covers and Gasket
For Threaded and Set Screw Conduit Bodies
Cat. No.
BLR-1
BLR-2
BLR-3
d"
f"
1"
1b"
1d"
2"
D-PAK *
®
d"
f"
1"
EMT
BLRL-19
BLRL-29
BLRL-39
BLRL-49
BLRL-59
BLRL-69
®
D-PAK *
DALB-1-CG†
DALB-2-CG†
DALB-3-CG†
DALB-4-CG†
DALB-5-CG†
DALB-6-CG†
d"
f"
1"
BLB-1
BLB-2
BLB-3
BLB-4
BLB-5
BLB-6
BLB-7•
BLB-8•
BLB-9•
BLB-10•
d"
f"
Red•Dot
ALB-1
ALB-2
ALB-3
ALB-4
ALB-5
ALB-6
ALB-7•
ALB-8•
ALB-9•
ALB-10•
Hub Size
Dead End
®
Back-Opening
Cat. No.
Covers
Gaskets
®
d"
f"
1"
• Shipped with one CV cover
9 Shipped with one SCV cover
†Shipped with one SCV cover and one GKN gasket
* See Pages H48-H50 for complete D-PAK assortment
Cat. No.
Die Cast
Stamped
CV-1
CV-2
CV-3
CV-4
CV-5
CV-6
CV-7
SCV-1
SCV-2
SCV-3
SCV-4
SCV-5
Neoprene
Composition
GKN-1
GKN-2
GKN-3
GKN-4
GKN-5
GKN-6
GKN-7
GKV-1
GKV-2
GKV-3
GKV-4
GKV-5
GKV-6
GKV-7
Hub Size
d"
f"
1"
1b"-1d"
2"
2d"-3"
3d"-4"
d"
f"
1"
1b"-1d"
2"
2d"-3"
3d"-4"
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H3
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H4
Conduit Bodies, Covers & Gaskets
C, E, & T
Size
A
d"
f"
1"
1b"
1d"
2"
2d"
3"
3d"
4"
3g
4e
5c
7b
7b
9d
12b
12b
15
15
B
C
D
E
F
G
CI
4c
5a
5n
7g
7g
10i
13
13
16j
16j
1Q
1w
1f
2d
2d
3a
4d
4d
5d
5d
1c
1e
1g
2d
2f
3l
4d
4d
5l
5l
2u
2A
3d
4i
4i
5u
6g
6g
8m
8m
2h
2X
2e
3w
3w
4
5A
5A
6m
6m
m
n
1
1c
1d
1O
2k
2k
3
3
4.3
7.3
11.8
32.0
32.0
69.5
190.0
190.0
366.0
366.0
C, E, & T
H
E
T
Red•Dot
®
C
LL, LR, & LRL
Size
A
B
C
D
E
F
G
H
CI
CI
d"
f"
1"
1b"
1d"
2"
2d"
3"
3d"
4"
3g
4e
5c
7b
7b
9d
12b
12b
15
15
3d
4a
4g
6d
6d
8l
11b
11b
14k
14k
4j
5a
5j
7g
7g
10i
13
13
16b
16b
1j
11r
1f
2d
2d
3a
4d
4d
5d
5d
1c
1e
1g
2f
2f
3k
4d
4d
5d
5d
3l
4a
4g
6j
6j
8i
10b
10b
12f
12f
2
2j
2d
3c
3c
3n
5d
5d
6d
6d
A
g
1
1d
1d
1n
2g
2g
3
3
4.3
7.3
11.8
32.0
32.0
69.5
190.0
190.0
366.0
366.0
4.8
7.5
12.5
36.5
36.5
73.8
LRL STYLE
ONLY
LL, LR, & LRL
LL
LR
LRL
Open
Thru
H4
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H5
Conduit Bodies, Covers & Gaskets
LB
Size
A
B
C
D
E
F
CI
d"
f"
1"
1b"
1d"
2"
2d"
3"
3d"
4"
3g
4e
5c
7b
7b
9d
12b
12b
15
15
4s
5a
5n
7g
7g
9m
13
13
16j
16j
1j
11r
1f
2d
2d
3a
4d
4d
5d
5d
1j
1e
1g
2d
2f
3k
3g
4d
5l
5l
3d
4b
4n
6d
6j
8
10B
10d
13d
13d
2h
2k
2f
3l
3m
4d
5b
5g
6n
6n
4.3
7.3
11.8
32.0
32.0
69.5
190.0
190.0
366.0
366.0
H
Size
A
B
C
D
E
SCV-1
SCV-2
SCV-3
SCV-4
SCV-5
CV-1
CV-2
CV-3
CV-4
CV-5
CV-6
CV-7
d"
f"
1"
1b" - 1d"
2"
2d" - 3"
3d" - 4"
3g
4e
5c
7b
9d
12s
15o
3d
4a
4g
6d
8l
11b
14k
12D
11r
1f
2d
3a
41r
51r
i
i
i
i
i
a
a
8-32 x c
8-32 x c
8-32 x c
12-24 x k
12-24 x k
j-8 x e
j-8 x e
Conduit Body Wiring Table* – Style of Fitting
Trade Size
f"
1"
1b"
1d"
2"
2d"
3"
3d"
4"
LB
C
T
LL, LR, LRL
#6
#4
#2
1/0
4/0
300 MCM
400 MCM
500 MCM
500 MCM
#6
#4
#2
1/0
2/0
250 MCM
250 MCM
350 MCM
350 MCM
#6
#4
#2
#1
1/0
2/0
2/0
250 MCM
250 MCM
#6
#4
#2
1/0
4/0
300 MCM
500 MCM
500 MCM
500 MCM
*The Maximum number and size of wire that can be safely pulled is based on three type XHHW wires or equal.
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H5
®
Cat. No.
Red•Dot
CV & SCV
Cat. No.
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H6
Mogul Pulling Elbow/Service Entrance Bodies
ASLB
ASLB-XL
Applications:
• Raintight junction for bringing electrical service into a location.
• Accessible wiring chamber provides a convenient location to pull
conductors and make splices.
Smooth
conduit
stops
Copper-free
aluminum
Clean
cover
edges
Features/Benefits:
Red•Dot
®
H
•
•
•
•
Copper-free* aluminum provides increased corrosion resistance.
Precision cast and machined surfaces permit safer wire pulling.
Clean cover edges provide good gasket sealing.
Precision NPT threaded hubs allow trouble-free field installation for
rigid and IMC conduit.
• Retained deep slotted stainless steel cover screws for faster
installation.
• Clear UL, CSA and cubic content markings speed approval by
inspectors.
Clear
markings
Standard Materials:
• Service Entrance Bodies: Die cast aluminum alloy A360 with less
than .004 copper content (copper-free).
• Covers d" and f": Stamped aluminum alloy, and stainless steel
screws.
• Covers 1" through 4": Die cast aluminum alloy A360 with less than
.004 copper content (copper-free), and stainless steel screws.
• Gaskets: Composition.
Complete
with cover
and gasket
Precision
machined
threads
Standard Finish:
• Aluminum lacquer finish.
Compliances:
•
•
•
•
UL Listed.
CSA Ceritfied.
Federal Spec. W-C-586.
NEC Article 370-5 and 370-28.
Sample Specifications:
• Service Entrance Fittings shall be die cast copper-free* aluminum
alloy A360. All conduit stops shall be free of rough edges.
Service Entrance Fittings shall be finished with aluminum lacquer.
Service Entrance Fittings shall be Red•Dot Catalog No. _________
*Less than .004 copper content
Mounts
flush to
the wall
Retained
deep slotted
screws
®
H6
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H7
Mogul Pulling Elbow/Service Entrance Bodies
Spacious, accessible wiring chamber for pulling conductors, making
splices, and bringing electrical service into a location.
• Dome cover - extra bending room.
• Deep slotted stainless steel cover screws.
• “I” beam construction adds strength.
• Smooth throats for easy wire pulling.
• Extra wiring room.
• Meets NEC Article 370-28.
• Ultra-high pressure die cast aluminum.
• UL Listed, CSA Certified.
• Copper-free aluminum, less than .004 copper content.
Cat. No.
Hub Size
Hub Size
MGKV-4
MGKV-5
MGKV-6
MGKV-7
1 or 1b"
1d" or 2"
2d" or 3"
3d" or 4"
Composition Gasket
Bodies with Covers and Gaskets
H
®
1"
1b"
1d"
2"
2d"
3"
3d"
4’
Red•Dot
MALB-3
MALB-4
MALB-5
MALB-6
MALB-7
MALB-8
MALB-9
MALB-10
Cat. No.
Service Entrance Bodies
Accessible junctions for bringing electrical service into a location.
• Mounts flush to wall.
• Standard and extra long configurations.
• Retained deep slotted stainless steel cover screws.
• Smooth throats for easy wire pulling.
• Ultra-high pressure die cast aluminum.
• Meets NEC Article 370-28.
• UL listed, CSA Certified.
• Copper-free aluminum, less than .004 copper content.
Cat. No.
Hub Size
2 ⁄2" - 4" Bodies with Covers and Gaskets
1
SALB-7
SALB-8
SALB-9
SALB-10
Cat. No.
Hub Size
⁄2" - 2" Bodies with Covers and Gaskets
1
ASLB-1
ASLB-2
ASLB-3
ASLB-4
ASLB-5
ASLB-6
2d"
3"
3d"
4"
Extra Long Bodies with Covers and Gaskets
d"
f"
1"
1b"
1d"
2"
ASLB-XL4
ASLB-KL6
1b"
2"
NOTE: Raintight when used with appropriate Red•Dot covers.
* See Pages H48-H50 for complete D-PAK assortment.
®
®
D-PAK *
®
DASLB-1
DASLB-2
DASLB-3
d"
f"
1"
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H7
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H8
Mogul Pulling Elbow/Service Entrance Bodies
ASLB
ASLB & ASLB-XL
Size
A
B
C
D
E
F
CI
d"
f"
1"
1b"
1d"
2"
3h
3n
4b
5d
6b
6f
2f
3b
3g
5b
6
6d
1b
1d
1f
2c
2k
3a
1l
1f
2i
3
3b
4
1a
1c
1f
2i
2k
2g
1h
f
1h
1b
1d
1e
2.0
3.0
5.5
13.0
18.8
38.8
E
F
CI
1j
1e
24.5
58.0
ASLB-XL
Size
A
B
C
D
1b"
2"
8
9n
7d
9f
2d
3c
2f
3f
2r
21j
H
Red•Dot
®
SALB
Size
A
B
C
D
E
F
G
2d"
3"
3d"
4"
13
13
16d
16d
12e
12e
15c
15c
4m
4d
5d
5d
4d
5b
6b
6b
3c
4a
5a
5a
2b
2k
2f
2f
5g
6k
7l
7l
CI
190
190
366
366
SALB
MALB
Size
A
B
C
D
E
F
G
CI
1"
1b"
1d"
2"
2d"
3"
3d"
4"
9e
9e
14w
14w
21W
21W
28e
28e
9h
9h
14b
14b
21X
21X
28W
28W
2d
2d
2f
2f
4d
4d
5d
5d
2f
2f
4
4
5e
5e
6d
6d
2h
2h
21i
21i
4a
4a
5a
5a
8d
8d
13
13
18
18
24
24
3e
3e
5r
5r
7z
7z
9z
9z
40
40
128
128
398
398
766.7
766.7
MALB
H8
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H9
Zinc Concrete Slab Inserts, Elbows and Plugs
ESL
ES
Applications:
Old Way
• Permits in-slab ceiling drops and floor mounts in poured
concrete.
• Provides flush threaded conduit hub for mounting, pulling and
future access to conduit systems.
• Design permits prefabrication of in-slab conduit system.
Features/Benefits:
Conduit running in a cement slab is bent 90º to run through a hole drilled in the form.
Drilling takes time and damages the form. Stripping form often damages conduit stubs.
Varying length of stubs requires individual measuring and cutting of conduit drops.
®
®
Red•Dot Way
4" Slab
ESL
Standard Material:
• Die cast zinc alloy ZAMAK 3. Certified by the Certified Zinc Alloy
Plan (CZAP).
6" Slab
Standard Finish:
• Natural.
ES
Compliances:
• UL Listed.
• CSA Certified.
Sample Specifications:
• Concrete Slab Inserts shall be die cast Zinc Alloy* ZAMAK 3. All
conduit stops shall be coined and free of rough edges. Service
Entrance Fittings shall be Red•Dot Catalog No. _______________
* Certified by the American Die Casting Institute.
Conduit running in a cement slab is attached to a 90º concrete slab insert, or conduit
is bent 90º and is threaded to a straight insert. Nail or screw fitting to wood or metal
forms. After concrete is poured and forms stripped, conduit drops quickly into fittings
from floor below. Drops are easily measured from ceiling line to switch or outlet
height and cut in uniform lengths.
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H
Red•Dot
• Flush design leaves no broken or bent stubs for easy removal of
undamaged forms.
• Flush design permits simplified in-slab work.
• Flush design leaves a neat, uncluttered job.
• Offered in straight ES configuration for straight through conduit
runs and mounting of floor boxes in slabs over 6" thick.
• Offered in ESL configuration to eliminate bending of conduit in
slabs over 4" thick.
• Precision cast and machined surfaces permit safer wire pulling.
• ZAMAK 3 Zinc can be embedded in concrete.
H9
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H10
Zinc Concrete Slab Inserts, Elbows and Plugs
Concrete slab inserts permit in-slab ceiling drops and floor mounts
in poured concrete.
4" Slab
ESL
• For Rigid and IMC.
• Slab insert is nailed to form prior to pour.
• Removable seal keeps threads cement free.
• ESL eliminates:
- Bends in 4" concrete slabs.
- Damage to form.
- Cutting off conduit stubs.
• UL Listed, CSA Certified.
6" Slab
ES
Threaded Rigid or IMC Conduit Inserts
Red•Dot
®
H
Cat. No.
Hub Size
Straight
Cat. No.
Hub Size
ESL-1
ESL-2
ESL-3
d"
f"
1"
90˚
ES-1
ES-2
ES-3
d"
f"
1"
Elbows and Plugs
Close Up Plugs, Zinc
Female to Female Aluminum Elbows
Cat. No.
Cat. No.
Hub Size
Corner
Rigid IMC
EMT
ACE-1
ACE-2
BCE-1
BCE-2
d"
f"
Pulling
Rigid IMC
EMT
APEF-1
APEF-2
BPEF-1
BPEF-2
Cat. No.
Color
Hub Size
PLG-1-RD
PLG-2-RD
PLG-3-RD
Silver
Silver
Silver
d"
f"
1"
Silver
Bronze
White
Silver
d"
d"
d"
f"
D-PAK *
®
DPLG-1
DPLG-1-BR
DPLG-1-WH
DPLG-2
d"
f"
* See Pages H48-H50 for complete D-PAK assortment
®
H10
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H11
Zinc Concrete Slab Inserts, Elbows, and Plugs
ESL
Cat. No.
Size
A
B
C
D
E
F
G
ESL-1
ESL-2
ESL-3
d"
f"
1"
4B
5™
5q
3}
3z
3f
3C
4a
3n
3i
3p
2©
1g
2a
2k
1o
1b
11r
b
b
b
ESL
ES
Cat. No.
Size
A
B
C
D
E
ES-1
ES-2
ES-3
d"
f"
1"
1∂
2™
2l
1l
1e
2
1z
1O
2j
1o
1b
1w
b
b
b
H
Red•Dot
ES
®
APEF and BPEF
Size
d"
f"
APEF
A
B
C
1h
1i
r
l
1a
1R
BPEF
ACE and BCE
Size
d"
f"
ACE
A
B
2c
2y
1a
1j
BCE
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H11
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H12
Industrial Vaportight Lighting
VAG-C
VKG-C
VWG-C
VXG-C
VXWG-C
Applications:
Red•Dot
®
H
• Low maintenance indoor/outdoor lighting where moisture, dirt,
dust, corrosion and rough service are problems.
• Low profile fixture design for where low ceiling height presents a
lighting problem.
• To light cold storage facilities, walkways, bridges, tunnels and
security locations.
• Used with colored globes as warning, caution or directional lights.
• For 100 or 200 watt medium base incandescent lamps.
Features/Benefits:
• Copper-free* aluminum and stainless steel screws provide
increased corrosion resistance.
• Precision cast and machined surfaces permit safer wire pulling.
• Fully threaded glass globes prevent cross threading assuring a
tight seal.
• High quality replaceable porcelain socket with high temperature
leads result in a long-lasting fixture.
• Five mounting configurations packaged three different ways to
suit all customer requirements
• Colored, heat resistant and shatterproof LEXAN globes available.
®
Standard Materials:
• Fixture and guards: Die cast aluminum alloy A360 with less than
.004 copper content (copper-free), and stainless steel screws.
Globe: Lime crystal glass.
Socket: Center contact, porcelain, medium base.
Standard Finish:
• Aluminum lacquer finish.
Compliances:
• UL Listed.
• Suitable for use in Wet Locations only when oriented as shown.
(mounted with lamp base up and guard/globe down).
Sample Specifications:
• Fixture shall be die cast copper-free* aluminum alloy A360.
All conduit stops shall be coined and free of rough edges.
LEXAN globes shall have full threads. Sockets shall be porcelain. Fixtures shall be finished with aluminum lacquer. Fixtures
shall be Red•Dot Catalog No. _______________
®
®
*Less than .004 copper content
H12
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H13
Industrial Vaportight Lighting
Ceiling Mount with Adapter Plate
Cat. No.
Hub Size
Max. Watt
Description
VK-11
VK-21
VK-12
VK-22
d"
f"
d"
f"
100
100
200
200
Pendant cap
with socket screw
terminals, gasket
and screws
VKG-11
VKG-21
VKG-12
VKG-22
VKG-11-C
VKG-21-C
VKG-12-C
VKG-22-C
d"
f"
d"
f"
d"
f"
d"
f"
100
100
200
200
100
100
200
200
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
100
200
Ceiling outlet
box cap with
socket with leads,
gasket and
screws
VAG-01
VAG-02
100
200
Ceiling outlet
box cap with
socket with leads,
gasket, screws,
and globe
VAG-01-C
VAG-02-C
100
200
Ceiling outlet
box cap with
socket with leads,
gasket, screws,
globe and
cast guard
Cat. No.
Pendant cap with
socket screw
terminals, gasket,
screws and globe
Pendant cap with
socket screw
terminals, gasket,
screws, globe
and cast guard
VA-01
VA-02
Ceiling Mount Cross Feed (5 tapped holes)
Pendant Mount
Cat. No.
Description
H
®
• Compatible with incandescent and most self-ballasted compact
fluorescent bulbs.
• For indoor or outdoor use.
• Fixture and guard die cast copper-free aluminum, less than .004
copper content.
• Available in components or complete fixture.
• Low silhouette incandescent vaportight.
• Variety of mounting configurations.
• UL Listed.
Max. Watt
Red•Dot
Low maintenance indoor lighting where moisture, dirt, dust,
corrosion and rough service are a problem.
Hub Size
Hub Size
Max. Watt
Description
VX-11
VX-21
VX-12
VX-22
d"
f"
d"
f"
100
100
200
200
Ceiling-cross feed
box with gaskets,
socket with leads,
screws, 4 closure
plugs and cast
mounting lugs
VXG-11
VXG-21
VXG-12
VXG-22
d"
f"
d"
f"
100
100
200
200
Ceiling-cross feed
box with gaskets,
socket with leads,
screws, 4 closure
plugs, cast
mounting lugs
and globe
VXG-11-C
VXG-21-C
VXG-12-C
VXG-22-C
d"
f"
d"
f"
100
100
200
200
Ceiling-cross feed
box with gaskets,
socket with leads,
screws, 4 closure
plugs, cast
mounting lugs,
globe and cast guard
NOTE: For upright mounting only. Caution: In ordering Lexan Globe, wattage is rated 75% of
standard globe size i.e. VGLL-02 is for use on 200 watt fixtures, but only rated for 150
watt lamps.
www.tnb.com
H13
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H14
Industrial Vaportight Lighting
Wall Mount with Adapter Plate
Wall Mount Cross Feed (5 tapped holes)
Cat. No.
Max. Watt
Description
Cat. No.
Hub Size
Max. Watt
Description
VW-01
VW-02
100
200
Wall mount
unit with socket
with leads,
gaskets, and
screws
VXW-11
VXW-21
VXW-12
VXW-22
d"
f"
d"
f"
100
100
200
200
VWG-01
VWG-02
100
200
Wall mount
unit with socket
with leads,
gaskets,
screws,
and globe
Wall mount cross
feed with socket
with leads, gaskets,and
screws, 4 closure
plugs, and cast
mounting lugs
VXWG-11
VXWG-21
VXWG-12
VXWG-22
d"
f"
d"
f"
100
100
200
200
Wall mount cross
feed with socket
with leads, gaskets,
screws, 4 closure
plugs, cast
mounting lugs,
and globe
VWG-01-C
VWG-02-C
100
200
Wall mount
unit with socket
with leads,
gaskets, globe,
screws, and
cast guard
VXWG-11-C
VXWG-21-C
VXWG-12-C
VXWG-22-C
d"
f"
d"
f"
100
100
200
200
Wall mount cross
feed with socket
with leads, gaskets,
screws, 4 closure
plugs, cast
mounting lugs,
globe and cast
guard
Red•Dot
®
H
Industrial Vaportight Accessories
Globes
Guards
Cat. No.
Max. Watt
Description
VGL-01
VGLA-01
VGLB-01
VGLG-01
VGLR-01
VGLH-01
100
100
100
100
100
150
Clear
Amber
Blue
Green
Red
Clear heat resistant
VGL-02
VGLR-02
VGLH-02
200
200
300
Clear
Red
Clear heat resistant
VGLL-01
VGLL-02
VGLA-A1
VGLA-R1
75
150
75
75
Clear prismatic
Clear prismatic
Amber
Red
Glass
Cat. No.
Max. Watt
Description
VGW-01
VGW-02
100
200
Clamp on plated
steel guards
VGD-01
VGD-02
100
200
Die cast
aluminum guards
with positive
locking screws.
Wire
Lexan
Not for use with guards.
Die Cast
Vaportight Boxes and Covers
Cat. No.
NOTE: For upright mounting only. Caution: In ordering Lexan Globe, wattage is rated 75% of
standard globe size i.e. VGLL-02 is for use on 200 watt fixtures, but only rated for 150
watt lamps.
LVX-1
LVX-2
V-B
H14
Max.Watt
Description
d"
f"
Box, 3d" diameter,
5 tapped holes,
4 closure plugs
with cast mounting lugs
none
Blank Cover
3d" diameter
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H15
Industrial Vaportight Lighting
Pendant Mount (VKG)
VKG
Ceiling Mount (VAG)
Cat. No.
A
B
VKG-11
VKG-21
VKG-12
VKG-22
3c
3c
4c
4c
8i
8i
10a
10a
Cat. No.
C
D
4h
4h
5b
5b
8f
8f
10e
10e
Cat. No.
A
B
VAG-01
VAG-02
3c
4c
7k
9c
Cat. No.
C
D
4h
5b
7n
9m
VKG-11-C
VKG-21-C
VKG-12-C
VKG-22-C
VAG
Red•Dot
VAG-01-C
VAG-02-C
H
®
Ceiling Mount Cross Feed (VXG)
VXG
Wall Mount (VWG)
Cat. No.
A
B
E
F
VXG-11
VXG-21
VXG-12
VXG-22
3c
3c
4c
4c
81i
81i
10f
10f
3d
3d
3d
3d
1e
1e
1e
1e
Cat. No.
C
D
4h
4h
5b
5b
9j
9j
11i
11i
Cat. No.
A
B
E
F
VWG-01
VWG-02
3c
4c
8k
10c
4f
5f
3d
3d
VXG-11-C
VXG-21-C
VXG-12-C
VXG-22-C
VWG
Cat. No.
VWG-01-C
VWG-02-C
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
C
D
4h
5b
8n
10m
H15
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H16
Industrial Vaportight Lighting
Wall Mount Cross Feed (VXWG)
VXWG
Cat. No.
A
B
VXWG-11
VXWG-21
VXWG-12
VXWG-22
3c"
3c"
4c"
4c"
8k"
8k"
10c"
10c"
VXWG-11-C
VXWG-21-C
VXWG-12-C
VXWG-22-C
3c
3c
4c
4c
8k
8k
10c
10c
C
4h"
4h"
5i"
5i"
D
8n"
8n"
10m"
10m"
LVX-1
LVX-2
E
F
1e"
1e"
1e"
1e"
3d"
3d"
3d"
3d"
1e"
1e"
1e"
1e"
3d"
3d"
3d"
3d"
1e"
1e"
3d"
3d"
G
H
I
J
CI
e"
e"
5"
5"
4k"
4k"
2m"
2m"
10.3
10.3
E
I.D
g"
g"
g"
g"
21h"
31i"
2g"
3g"
2g"
2g"
Red•Dot
®
H
Threaded Glass Globe (VGL)
Threaded Glass Plastic Globe (VGL, VGLL)
VGL
Cat. No.
VGL-01series
VGL-02 series
VGLL-01
VGLL-02
VGLA-A1
VGLA-R1
A
B
C
D
3c"
4c"
3W"
4W"
3W"
3W"
6W"
8c"
5n"
8b"
5n"
5n"
3j"
4j"
3c"
4c"
3c"
3c"
1"
1"
Guards (VGD, VGW)
VGD, VGW
H16
Cat. No.
A
B
VGD-01
VGD-02
VGW-01
VGW-02
4h"
5j"
4h"
5j"
7"
8e"
6g"
8f"
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H17
Cross Reference
Ceiling Mount
Wall Mount
red•dot
Stonco
Killark
Appleton
VA-01
VA-02
VAG-01
VAG-02
VAG-01-C
VAG-02-C
VK1
VK2
VK1K
VK2K
VK1GC
VK2GC
VFC-100
VFC-200
VOB-100
VOB-200
VOBG-100
VOBG-200
JB1-A
JB1-A
JB10-A
JB20-A
JB10G-A
JB20G-A
Crouse Hinds
VXH15
VXH12
–
–
VXH15GP
VXH12GP
Ceiling Mount Cross-Feed
Stonco
VX-11
VCXL11
VXA-1
VGX-1
VX-21
VK1+VXL13
VXA-2
VGX-2
VX-12
VCXL21
VXA-1
VGX-1
VX-22
VK2+VXL13
VXA2
VGX-2
VXG-11
VCXL11K
VXG-12
VXG-22
VXG-11-C
VXG-21-C
VXG-12-C
VXG-22-C
VXAG-110
VUXV-1-100
VUCG-1-100
VUHG-1-100
VK1K+VXL13
VXAG-210
VUXG-2-100
VUCG-2-100
VUHG-2-100
VCXL21K
VXAG-120
VUXG-1-200
VUCG-1-200
VUHG-1-200
VK2K+VXL13
VXAG-220
VUXG-2-200
VUCG-2-200
VUHG-2-200
VCXL11GC
VXAGG-110
VUXGG-1-100
VUCGG-1-100
VUHGG-1-100
VK1GC+VXL13 VXAGG-210
VUXGG-2-100
VUCGG-2-100
VUHGG-2-100
VCXL21GC
VXAGG-120
VUXGG-1-200
VUCGG-1-200
VUHGG-1-200
VK2GC+VXL13 VXAGG-220
VUXGG-2-200
VUCGG-2-200
VUHGG-2-200
Stonco
VK-11
VK-21
VK-12
VK-22
VKG-11
VKG-21
VKG-12
VKG-22
VKG-11-C
VKG-21-C
VKG-12-C
VKG-22-C
VP-11
–
VP21
–
VP11K
–
VP21K
–
VP11GC
–
VP21GC
–
Killark
VGA-1
VGA-2
VGA-1
VGA-2
VUAG-1-100
VUAG-2-100
VUAG-1-200
VUAG-2-200
VUAGG-1-100
VUAGG-2-100
VUAGG-1-200
VUAGG-2-200
Appleton
Crouse Hinds
VW-01
VW-02
VWG-01
VWG-02
VWG-01-C
VWG-02-C
VW1
VW2
VW1K
VW2K
VW1GC
VW2GC
VB-1
VB-2
VOBL-100
VOBL-200
VOBLG-100
VOBLG-200
JBW1-A
JBW1-A
JBW10-A
JBW20-A
JBW10G-A
JBW20G-A
VG175, VXHB15
VXHB12
–
–
VG1759, VXHB15GP
VXHB12GP
Appleton
Crouse Hinds
Wall Mount Cross-Feed
Appleton
VXHA50-A
VC50-A
V50-A
VXHA75-A
VC75-A
V75-A
VXHA50-A
VC50-A
V50-A
VXHA75-A
VC75-A
V75-A
VXHA1050-A
VC1050-A
V1050-A
Crouse Hinds
VXHF15
V175
VC175
VXHF25
V275
VC275
VXHF12
VXHF22
–
VXHA2050-A
VC2050-A
V2050-A
–
VXHA2075-A
VC2075-A
V2075-A
–
VXHA1050G-A
VC1050G-A
V1050G-A
VXHF15GP
V1759
VC1759
VXHA1075G-A
VC1075G-A
V1075G-A
VXHF25GP
V2759
VC2759
VXHA2075G-A
VC2050G-A
V2050G-A
VXHF12GP
VXHA2075G-A
VC2075G-A
V2075G-A
VXHF22GP
VA50-A
VA75-A
VA50-A
VA75-A
VA1050-A
VA1075-A
VA2050-A
VA2075-A
VA1050-G-A
VA1075-G-A
VA2050G-A
VA2075G-A
Stonco
VXW-11
VXW-21
VXW-12
VXW-22
VXWG-11
VXWG-21
VXWG-12
VXWG-22
VXWG-11-C
VXWG-21-C
VXWG-12-C
VXWG-22-C
VWXL11
VW1+VXL13
VWXL21
VW2+VXL13
VWXL11K
VW1K+VXL13
VWXL21K
VW2K+VXL13
VWXL11GC
VW1GC+VXL13
VWXL21GC
VW2GC+VXL13
Killark
VB-1+VBC-1
VB-2+VBC-2
VB-1+VBC-1
VB-2+VBC-2
VOBL-100+VBC-1
VOBL-200+VBC-2
VOBL-100+VBC-1
VOBL-200+VBC-2
VOBLG-100+VBC-1
VOBLG-200+VBC-2
VOBLG-100+VBC-1
VOBLG-200+VBC-2
–
VGAT75-A
–
VGAT75-A
–
VGAT1075-A
–
VGAT2075-A
–
VGAT1075G-A
–
VGAT2075G-A
VJ175, VXHF15
VJ275, VXHF25
VXHF12
VXHF22
–
–
–
–
VJ1759, VXHBF15GP
VJ2759, VXHBF25GP
VXHBF12GP
VXHBF22GP
Accessories
VXHA1075-A
VC1075-A
V1075-A
Appleton
red•dot
–
Pendant Mount
red•dot
Killark
red•dot
Stonco
LVX-1
VXL1
LVX-2
VXL13
V-B
V-1
V-2
VGD-01
VGD-02
VGD-01
VGD-02
VGLA-01
VGLA-02
VGLB-01
VGLB-02
VGLG-01
VGLG-02
VGLH-01
VGLH-02
VGLR-01
VGLR-02
VGLL-01
VGLL-02
VGLA-A1
VGLA-R1
VGW-01
VGW-02
–
–
–
V131
V132
VGC100
VGC200
VGA100
VGA200
VGB100
VGB200
VGG100
VGG200
VGCH100
VGCH200
VGR100
VGR200
VPRC5
VPRC10
–
–
V127
V128
Killark
Appleton
Crouse Hinds
Crouse Hinds
VGH-1, VBC-1
VGX-1
VLJSX-1
VGC-1
VGH-2, VBC-2
VGC-2
VLJSX-2
VGC-2
VG-2
VAG-100
VAG-200
VCG-100
VCG-200
VAMG-100
VAMG-200
VBG-100
VBG-200
VGG-100
VGG-200
VCGP-100
VCGP-200
VRG-100
VRG-200
VPLCG-100
VPLCG-200
–
–
–
–
JBX50L-A
VXFT10
VXF10
JBX75L-A
VXFT20
VXF20
JBK-1B-CA
JBK-50-A
–
VGU-1
VGU-2
VGL-1CL
VGL-2CL
VGL-1AM
VGL-2AM
VGL-1BL
VGL-2BL
VGL-1GR
VGL-2GR
VGL-1HR
VGL-2HR
VGL-1RE
VGL-2RE
–
–
–
–
VWG-1
VWG-2
GRF10
GRF11
GRF12
V910, V911, P50
P21
G54
G24
VN76, G58
G28
VN73, G56
G26
VN72, G55
G25
V63, V183, G34, G251
V93
VN85, VN75, G57
G27
V470
G63
G65
V475, G67
VDA15, VDA175
VDA25, VDA275
VDA12
VDA22
–
–
–
–
VDA15GP
VDA25GP
VDA12GP
VDA22GP
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
H
®
VXG-21
Killark
Stonco
Red•Dot
red•dot
red•dot
www.tnb.com
H17
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H18
®
Dry-tite Universal Boxes
IH3-1-LM
2IH5-1
CCD
2CCTS
Applications:
• Dry-tite boxes and covers protect wiring devices, switches,
electronic components, and terminal blocks in Dry, Damp and
Wet Locations.
• Accessible wiring chamber provides a convenient location to
maintain or change a system, pull conductors and make splices.
• Junction box for branch conduits.
®
Red•Dot
®
H
Securely
fastened
mounting
plates
Stainless
steel springs
Corrosion
resistant
metal
Features/Benefits:
• Alloy A380 aluminum, certified zinc alloy, and stainless steel
springs provide increased corrosion resistance.
• Die cast construction and industrial design combine to produce
a rugged protective enclosure for devices on many applications.
• Clean cover edges provide good gasket sealing.
• Precision cast and machined surfaces permit safer wire pulling.
• Clear UL and cubic content markings speed approval by
inspectors.
• Convenient mounting lugs for a variety of mounting methods.
• Securely fastened mounting plates reduce costly call backs.
Standard Materials:
• Boxes: Die cast aluminum alloy A380.
• Cover Plates: Stamped aluminum alloy or certified die cast zinc
alloy ZAMAK 3.
• Cover Lids: Certified die cast zinc alloy ZAMAK 3.
Standard Finish:
• Aluminum lacquer finish.
Compliances:
•
•
•
•
•
•
•
Clear marking
UL Listed.
Boxes: CSA Certified with factory installed ground screw.**
Covers: CSA Certified.
Covers suitable for use in Wet Locations with covers closed.
CCB and CCT series covers suitable for use in Wet Locations.
Federal Spec. W-C-586.
NEMA 3R Rated.
Clean cover
edges
Precision
machined
threads
Ground
screw
Sample Specifications:
• Universal device boxes and covers shall be of aluminum alloy
A380 and certified zinc alloy. All conduit stops shall be free of
rough edges. Covers shall have stainless steel springs. Covers
shall be finished with aluminum lacquer. Universal device
boxes And covers shall be Red•Dot Catalog No. ____________
®
**Consult factory for lead time and minimum quantity.
H18
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H19
Accessible wiring chamber provides a convenient location to pull
conductors and make splices in dry, damp or wet locations.
®
Dry-tite Universal Boxes
• Maximum cubic capacity.
• Securely fastened mounting plates.
• Corrosion resistant materials.
• Powder coated finish.
• Ground screw included.
• Precision machined threads.
• Clear UL and cubic volume marking.
Two Gang
Cat. No.
Hub Size
Outlets
2IH3-1•
2IH3-2•
d"
f"
Top 1
Bottom 1
Back 1
Total 3
Three Outlets
Single Gang
Cat. No.
Hub Size
Color
Outlets
D-PAK *
®
Three Outlets
IH3-1
IH3-2
IH3-1-LM•
IH3-2-LM•
Silver
Silver
Silver
Silver
d"
d"
d"
f"
1"
Silver
Bronze
White
Silver
Silver
Top 1
Bottom 1
Back 1
Total 3
d"
2IH4-1•
2IH4-2•
d"
f"
Four Outlets
D-PAK *
®
DIH3-1-LM•
DIH3-1-LM-BR•
DIH3-1-LM-WH•
DIH3-2-LM•
DIH3-3-LM
Five Outlets
d"
f"
d"
f"
Silver
Silver
Silver
Silver
DIH4-1-LM•
DIH4-1-LM-BR•
DIH4-1-LM-WH•
DIH4-2-LM•
d"
d"
d"
f"
Silver
Bronze
White
Silver
IH5-1
IH5-2
IH5-1-LM•
IH5-2-LM•
d"
f"
d"
f"
Silver
Silver
Silver
Silver
d"
f"
Silver
Silver
d"
f"
Silver
Silver
2IH5-1•
2IH5-2•
d"
f"
Top 2
Bottom 2
Back 1
Total 5
2IH5S2-1•
2IH5S2-2•
d"
f"
Top 1
Bottom 1
Side 1
Side 1
Back 1
Total 5
2IH7-1•
2IH7-2•
d"
f"
Top 3
Bottom 3
Back 1
Total 7
2IH7S2-1•
2IH7S2-2•
d"
f"
Top 2
Bottom 2
Side 1
Side 1
Back 1
Total 7
Top 2
Bottom 1
Back 1
Total 4
D-PAK *
®
Five Outlets (2 side)
Five Outlets
Top 2
Bottom 2
Back 1
Total 5
Seven Outlets
D-PAK *
®
DIH5-1-LM•
DIH5-2-LM•
Five Outlets (2 side)
IH5S2-1•
IH5S2-2•
Top 1
Bottom 1
Side 1
Side 1
Back 1
Total 5
Seven Outlets (2 side)
Six Outlets (3 side)
IH6S2-1•
IH6S2-2•
d"
f"
Silver
Silver
Top 1
Bottom 1
Side 2
Side 1
Back 1
Total 6
NOTE: Raintight when used with appropriate Red•Dot covers. Boxes supplied with 2 closure
plugs and ground screw.
• With mounting lugs
* See Pages H48-H50 for complete D-PAK assortment.
®
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H19
H
®
Four Outlets
IH4-1
IH4-2
IH4-1-LM•
IH4-2-LM•
Top 2
Bottom 1
Back 1
Total 4
Red•Dot
d"
f"
d"
f"
D2IH3-1
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H20
®
Dry-tite Universal Boxes
Extensions – Single Gang
Deep Boxes – Single Gang
Cat. No.
Hub Size
Cat. No.
Outlets
Hub Size
Outlets
Description
IHE
N/A
0
Extension
ring for one
gang box
with gasket
and screws
IHE4-1
d"
Top 2
Bottom 2
Total 4
Four hole
extension
ring for one
gang box with
4 plugs, gasket
and screws
d"
f"
Top 1
Bottom 1
Total 2
d"
f"
Top 2
Bottom 2
Side 1
Side 1
Total 6
6 Hole
flanged box
extension
adapter with
four plug
gasket and
screws
Hub Size
Outlets
Description
N/A
0
Extension ring
for two gang
boxes with
gasket and
screws
Hub Size
Outlets
Description
d"
f"
4
Round extension
with gasket
and screws
No Outlets
Three Outlets
IHD3-1•
IHD3-2•
IHD3-3•
d"
f"
1"
Top 1
Bottom 1
Back 1
Total 3
Four Outlets
Four Outlets
IHD4-1•
IHD4-2•
d"
f"
Top 2
Bottom 1
Back 1
Total 4
Two Outlets, Flanged
Add-On
Red•Dot
®
H
IHEF2-1
IHEF2-2
Two Gang
Five Outlets
2IHD5-2•
2IHD5-3•
f"
1"
Top 2
Bottom 2
Back 1
Total 5
Six Outlets, Flanged
Add-On
IHEF6S2-1
IHEF6S2-2
Three Gang
Seven Outlets
3IHD7-2•
3IHD7-3•
f"
1"
Top 3
Bottom 3
Back 1
Total 7
2 Hole
flanged box
extension
adapter with
one plug
gasket and
screws
Two Gang
Cat. No.
No Outlets
2IHE
Mounting Lugs
• With mounting lugs
H20
Cat. No.
Description
LM
2 mounting lugs
with self tapping
screws. For LM
boxes only
Round
Cat. No.
Four Outlets
SE-47
SE-48
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H21
®
Dry-tite Single Gang Covers
Single Gang Device Covers
Cat. No.
Color
Description
Silver
Device mount
Silver
Bronze
White
Silver
Bronze
White
Device mount
Device mount
Device mount
Device mount stay open
Device mount stay open
Device mount stay open
CCDV
CCDV-L
Silver
Silver
Device mount
Device mount
with lock option
D-PAK *
DCDV
DCDV-BR
DCDV-WH
Silver
Bronze
White
Device mount
Device mount
Device mount
Silver
Device mount
Silver
Bronze
White
Device mount
Device mount
Device mount
Silver
Silver
Silver
Bronze
White
Duplex receptacle cover, horizontal
CCD
Cat. No.
Color
Description
Single Receptacle Cover, vertical - 1.59" Opening
Silver
CCSV-TL
Device mount
D-PAK *
®
DCCD
DCCD-BR
DCCD-WH
DCCDSO
DCCDSO-BR
DCCDSO-WH
Integral
Locking
Hasp
NEW
Motor base plug and cover, horizontal
CCMB
Silver
Device mount
15A-125V
motor base
plug
CCT
Silver
Device mount
switch cover
only, packed
with spacers
and screws
Duplex receptacle cover, vertical
®
Switch cover only
GFCI receptacle cover, horizontal
Red•Dot
CCG
H
D-PAK *
®
Switch cover with switch
®
DCCG
DCCG-BR
DCCG-WH
CCT-1
CCT-1-20
CCT-2-20
Silver
Silver
Silver
Device mount
Device mount
with lock option
CCT-3
Silver
Device mount
Device mount
Device mount
Single Gang Lampholder Covers
GFCI receptacle cover, vertical
CCGV
CCGV-L
Single pole 15A, 125V
Single pole 20A, 120-277V
Double pole 20A, 120-277V
All with spacers and screws
3-way switch 15A, 125V
D-PAK *
®
DCGV
DCGV-BR
DCGV-WH
Single receptacle cover, horizontal - 1.485" Diameter Opening
CCS
Silver
Device mount
Single receptacle cover, vertical - 1.59" Diameter Opening
CCSV
CCSV-L
Silver
Silver
CCPO
Silver
Device mount
Device mount
with lock option
Power outlet
cover with 2.156"
diameter
opening.
Box mount.
LC-11
Cat. No.
Cat. No.
Standard
(2m" x 4d")
LC-11
Jumbo
(3a" x 5a")
LF11
Size
Description
d"
One hole
Device mount.
Two holes.
Device mount.
Three holes.
Device mount.
LC-21
___
d"
LC-31
LF31
d"
Cat. No.
Color
Size
Description
DLC-31
Silver
d"
DLC-31-BR
Bronze
d"
DLC-31-WH
White
d"
Three holes
Device mount
Three holes
Device mount
Three holes.
Device mount
D-PAK *
®
LC-21
Single Gang Gaskets
Cat. No.
Color
Description
CCK
CCSK
Black
Black
Neoprene
Neoprene
LC-31
NOTE: Raintight when used with appropriate Red•Dot boxes
• All covers packed with gasket and screws
* See Pages H48-H50 for complete D-PAK assortment
®
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H21
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H22
®
Dry-tite Two Gang Covers
Two Gang Device Covers
Cat. No.
Description
Two duplex receptacle cover
Cat. No.
Description
Double Switch Cover
Device mount
Device mount with
lock option
2CCD
2CCD-L
2CCT
2CCT-1
Cover only, packed
with spacers
Cover with two
single pole 15A, 125V
switches and spacers
Two GFCI receptacle cover
Device mount
2CCG
Switch and one duplex receptacle cover
2CCTD
2CCTD-1
One duplex and one GFCI receptacle cover
Device mount
2CCDG
Switch and one GFCI receptacle cover
2CCTG
Red•Dot
®
H
Cover only, packed
with spacers
Cover with one switch
single pole 15A, 125V
and one duplex
receptacle and spacers
Device mount cover only
with spacers
Two single receptacle cover - 1.485" Diameter Opening
Device mount
2CCS
®
Dry-tite Blank Covers
Cat. No.
Color
Description
CCB
CCB-FS
Silver
Silver
Device mount
Box mount
DCCB
DCCB-BR
DCCB-WH
Silver
Bronze
White
Device mount
2CCB
2CCB-FS
Silver
Silver
Device mount
Box mount
D2CCB
Silver
Device mount
3CCB
Silver
Box mount
Single Gang
One single receptacle and one duplex receptacle cover 1.485" Diameter Opening
Device mount
2CCSD
D-PAK *
®
Two Gang
Single receptacle and one GFCI receptacle cover 1.485" Diameter Opening
Device mount
2CCSG
D-PAK *
®
Three Gang
NOTE: Raintight when used with appropriate Red•Dot boxes.
All covers packed with gasket and screws.
* See Pages H48-H50 for complete D-PAK assortment
®
®
H22
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H23
®
Dry-tite Universal Boxes
Single Gang Boxes
Single Gang Boxes
Cat. No.
IH
IH
IH-LM
IH-LM
IH-S
IH-S
IHD
IHD
IHD
IH
Hub Size
A
B
C
D
d"
f"
d"
f"
d"
f"
d"’
f"
1"
4l
4l
4l
4l
4l
4l
4l
4l
4l
2m
2m
2m
2m
2m
2m
2m
2m
2m
2
2
2
2
2
2
2e
2e
2e
e
e
e
e
e
e
e
e
f
E
3m
3m
3m
3m
3m
3m
3m
F
G
H
J
CI
3d
3d
3d
3d
3d
3d
3d
3b
3b
3b
3b
3b
3b
3b
3b
3b
1g
1g
1g
1g
1g
1g
1g
1g
1g
1d
1d
1d
1d
1d
1d
1d
1d
1d
17.3
17.0
17.3
17.0
17.0
17.0
24.8
24.8
23.5
Two Hole Flanged Box
Extension Adapter
Single Gang Extension Rings
Six Hole Flanged Box
Extension Adapter
H
Red•Dot
®
IHE4-1
IHEF2 (Add-On)
IHE
Two and Three Gang Boxes
IHEF6S2 (Add-On)
Two Gang Extension Ring
2IH & 3IH
2IHE
Two and Three Gang Boxes
Cat. No.
A
B
C
D
E
F
G
H
2IH3
2IH4
2IH5
2IH5S2
2IH7
2IH7S2
2IHD5
3IHD7
4l
4l
4l
4l
4l
4l
4l
4l
4e
4e
4e
4e
4e
4e
4e
6k
2h
2h
2h
2h
2h
2h
2W
2W
e
e
e
e
e
e
f
1i
5
5
5
5
5
5
5
6m
3d
3d
3d
3d
3d
3d
3d
3d
3W
3W
3W
3W
3W
3W
3W
3b
3f
3f
3f
3f
3f
3f
3f
5e
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
J
K
1d
1d
1d
1d
11i
11i
L
M
CI
3b
3b
3b
3b
3b
3b
3b
3b
3l
3l
3l
3l
3l
3l
3l
3l
31.8
31.8
31.8
31.8
30.3
32.0
40.3
54.8
H23
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H24
®
Dry-tite Universal Boxes
Single Gang Covers
CCD
CCDV AND CCGV
CCT
CCB
H
Red•Dot
®
CCG
CCS
CCSV
CCMB
Typical FS Mount
Hole Pattern
Two and Three Gang Covers
2CCSD and 2CCSG
3CCB
2CCT
H24
2CCTD
2CCB
2CCS
2CCD & 2CCG
2CCTS
2CCTG-FS
Typical FS Mount
Hole Pattern
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H25
®
Code Keeper
Wet or Dry, All Outlets Can Go Undercover with
Code Keeper
®
Code Keeper weatherproof covers are required by the National Electric
Code anyplace where water may come in contact with electrical outlets
when a plug is in use. Code Keeper covers are also ideal anywhere to
prevent accidental disconnects, reduce tampering, and to provide a
lockable cover that meets OSHA requirements.
®
®
Suggested Applications:
®
®
®
®
Commercial: for vending
machines, car washes,
restaurant kitchens.
®
®
®
®
National Electric Code Article: 406.8(B):
Industrial: for
manufacturing areas,
food processing, labs,
loading docks.
(1) 15- and 20- Ampere, 125- and 250-volt
receptacles installed outdoors in a wet
location shall have an enclosure that is
weatherproof whether or not the
attachment plug cap is inserted.
Recreational: for pools
and spas, athletic fields,
golf courses.
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H25
®
Residential: for holiday
and landscape lighting,
bug zappers, sprinkler
systems.
H
Red•Dot
Residential – holiday and landscape lighting, wells and sump pumps,
sprinkler systems, plug-in timers, garages, patios.
Commercial – vending machines, car washes, outdoor signs, restaurant
kitchens, greenhouses and nurseries, marinas, garages, lumberyards.
Industrial – manufacturing areas, food processing, water treatment plants,
security cameras, laboratories, washdown areas, loading docks.
Recreational – pools and spas, parks, playgrounds, zoos, RV
connections, athletic fields, ball parks, stadiums, outdoor stages,
amphitheaters, golf courses.
The electrical code is the reason you need a wet location cover, but the
reason to buy Code Keeper covers are simple: aluminum construction;
easy installation with instructions in English, Spanish, and French; and a
lifetime warranty from a manufacturer that has defined reliability in
electrical construction materials for over half of a century.
Cover the code with protection that lasts a lifetime with Code Keeper
covers.
The National Electric Code requires you to cover outdoor or other wet
location receptacles any time they are in use to ensure the safety of
anyone who may come in contact with them.
Code Keeper covers are corrosion-resistant, aluminum wet location
covers that meet the requirements of the National Electric Code and are
backed by a lifetime warranty.
Red•Dot ’s Code Keeper wet location cover is NEMA 3R rated, UL Listed
and CSA certified, and meets all the requirements of NEC Article 406.8(b).
Code Keeper covers are rugged, corrosion-resistant metal construction
that provide long-lasting durability and are not subject to cracking or
breaking. Made with the same Red•Dot quality that contractors know and
trust, Code Keeper covers offer a lifetime of use and safety.
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H26
®
Code Keeper Wet Location Covers
Single Gang
Medium Horizontal
Single Gang
Small Vertical
Single Gang
Medium Vertical
Single Gang
Large Vertical
Two Gang
Applications:
Red•Dot
®
H
• Protects receptacles, switches, and plugs for single gang
and two gang configurations in Dry and Wet Locations.
• Provides a lockable cover that complies with OSHA lockout/
tagout requirements.
• Prevents accidental equipment disconnects, reduces
tampering, and deters theft and equipment removal.
Hinge
Plate
Cover
FS Mount
Features/Benefits:
• Alloy A360 copper-free* aluminum provides increased
corrosion resistance.
• Die cast, metal construction provides long lasting durability.
• NEMA 3R rating ensures protection against falling rain, sleet,
and external ice formation when used with appropriate
device boxes.
• Clear UL and CSA markings speed approval by inspectors.
• Wide range of cover depths and receptacle configurations
accommodate almost every common plug and cord size.
• Combination box or device mounting design provides
flexibility in installation.
• Trilingual instructions help to make installation easy for
everyone.
Standard Materials:
Device Mount
Padlock Eye
for b" Shackle
• Covers and Plates: Die cast aluminum alloy A360 with less
than .004 copper content (copper-free).
• Gaskets: Closed-cell foam.
Standard Finish:
• Aluminum lacquer finish.
Compliances:
• NEC Article 406.8(B).
• UL Listed.
• CSA Certified.
Sample Specifications:
• Code Keeper covers shall comply with NEC Article 406.8(b)
and be die cast copper-free* aluminum alloy A360. Covers
shall be finished with aluminum lacquer.
Red•Dot Catalog No. _______________
®
*Less than .004 copper content.
H26
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H27
®
Code Keeper Wet Location covers
All 15- and 20-Ampere, 125- and 250-volt receptacles installed
outdoors in a wet location must have an enclosure that is weatherproof
whether or not the attachment plug is inserted.
®
Code-Keeper is required by the National Electrical Code Article 406.8
(B) for unattended in-use plugs in wet locations.
• Die Cast A360 aluminum alloy (less than .004 copper content).
• NEMA 3R Rating.
• Clear UL and CSA markings.
• Wide range of cover depths and receptacle configurations.
• Sturdy lockable cover tab compiles with OSHA lockout/tagout
requirements.
• Combination box or device mount design (for most styles).
• Powder coated finish.
H
Two Gang
Single Gang
Cat. No.
Description
Regular Cover
41⁄4" Internal Depth
Small Vertical Cover
21⁄4" Internal Depth
Duplex receptacle cover
CKSGV
GFCI receptacle cover
CKSSV
Single (1.438")
receptacle cover
Two duplex
receptacle cover
2CKD
2CKDG
Medium Horizontal Cover
31⁄4" Internal Depth
®
CKSDV
Description
Red•Dot
Cat. No.
Duplex and GFCI receptacle cover
2CKG
Two GFCI
receptacle cover
2CKS
Two single
(1.438")receptacle cover
2CKSD
Single (1.438") and
duplex receptacle cover
CKMD
Duplex receptacle cover
CKMG
GFCI receptacle cover
2CKSG
CKMS
Single (1.438")
receptacle cover
Single (1.438") and
GFCI receptacle cover
2CKTD
Toggle and duplex
receptacle cover
2CKTG
Toggle and
GFCI receptacle cover
2CKTS
Toggle and single
(1.438") receptacle cover
Medium Vertical Cover
31⁄4" Internal Depth
CKMDV
Duplex receptacle cover
CKMGV
GFCI receptacle cover
2CKTSY
CKMSV
Single (1.438")
receptacle cover
Toggle and single
(1.745") receptacle cover
2CK1DV*
One duplex
vertical receptacle cover
CKMSVL
Single (1.594")
receptacle cover
2CK1GV*
One GFCI
vertical receptacle cover
2CK1SM*
One single (2.656")
receptacle cover, box
mount only
2CK1SXL*
One single (2.125")
receptacle cover, box
mount only
Large Vertical Cover
43⁄4" Internal Depth
CKLSVL
Single (1.594") receptacle,
cover, box mount only
CKLSVY
Single (1.745") receptacle,
cover, box mount only
CKLSVXL
Single (2.125") receptacle,
cover, box mount only
2CK1SV*
One single
(1.438") receptacle cover
NOTE: Dry-Tite covers packed with gasket and screws.
* Can be used to cover one receptacle with an oversized wall opening.
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H27
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H28
®
Code Keeper Wet Location Covers
Single Gang Vertical (Small)
accepts most
CKSDV
CKSGV
CKSSV
Medium Vertical Covers
CKMDV
CKMGV
CKMSV
CKMSVL
Red•Dot
®
H
Medium Horizontal Covers
CKMD
CKMG
CKMS
Large Vertical Covers
CKLSVL
CKLSVY
CKLSVXL
Two Gang Covers
H28
2CKD
2CKDG
2CKG
2CKS
2CKSG
2CKTD
2CKTG
2CKTS
2CK1DV
2CK1GV
2CK1SM
2CK1SV
2CKSD
2CK1SXL
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H29
Weatherproof Covers – While-In-Use Applications
w
Ne ucts
d
Pro
Universal While-In-Use Covers
to secure using an external locking
device*. Perfect for all outdoor outlets
including landscape lighting, lawn
equipment, pool/hot tub pumps, and
holiday lighting.
T&B’s newest Universal While-In-Use
covers keep out moisture and take the
hassle and cost out of installation.
Single or two-gang kits accommodate
up to eight configurations each, and
every cover is designed with a method
•
•
•
•
•
•
•
Saves You Time – No inserts to slow you down, no labor intensive cutouts.
Horizontal or vertical orientation
Meets NEC 406.8(B) code requirements
Lockable cover design for added security using external locking device
High impact UV-resistant polycarbonate base construction
Weatherproof, thermoplastic cover with transparent finish
Accommodates GFCI, single and duplex receptacles, Toggle switches and single
receptacles up to 1.59” diameter
• Mounts to a box or the device. All installation screws included.
• Great for retrofit applications. Device holes are keyed, so just back out the
existing device screws and slip the cover over previously installed screws
H
Single Gang Base Options
Universal Nonmetallic While-In-Use Cover
Cat.
No.
2
3
4*
Horizontal
5
6
7
CKNM
2CKNM
Single gang duplex/GFCI/switch/single 1.59 – horizontal or vertical – pad lockable.
Two gang duplex/GFCI/switch/single 1.59 – horizontal or vertical – pad lockable.
6
4
®
1
Std.
Ctn.
Description
U.L. Listed
CSA Certified
Cover ships as a vertical GFCI, the industries most commonly used version.
* External locking device (such as a padlock) not supplied.
8*
*1.59" diameter fits up to 30 Amp twist lock receptacle.
Two Gang Base Options
5d"
5d"
1
2*
3
4
2f"
4"
4"
Single Gang (CKNM)
5**
6**
7
8
*2.125" diameter
**1.59" diameter
Fast and Easy Installation.
Choose your base plate and secure to the
device. Then snap on the lid, and you’re done!
5"
5"
2c"
5"
5"
Two Gang (2CKNM)
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
Red•Dot
Vertical
H29
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H30
®
Dry-tite Round Boxes, Extensions & Covers
S-47**
Applications:
• Junction for branch conduits.
• Spacious, accessible wiring chamber provides a convenient
location to maintain or change a system, pull conductors and
make splices.
Red•Dot
®
H
Features/Benefits:
•
•
•
•
Copper-free* aluminum provides increased corrosion resistance.
Precision cast and machined surfaces permit safer wire pulling.
Clean cover edges provide good gasket sealing.
Precision NPT threads allow trouble-free field installation for
rigid, IMC or EMT conduit.
• Deep slotted stainless steel cover screws for faster installation.
• Clear UL and cubic content markings speed approval by
inspectors.
Standard Materials:
• S Boxes - Die cast aluminum alloy A380.
• SS-B Cover - Stamped aluminum.
• Gaskets: Composition.
Standard Finish:
• Aluminum lacquer finish.
Compliances:
• UL Listed.
• Federal Spec. W-C-586B.
Sample Specifications:
• Outlet boxes and covers shall be die cast copper-free*
aluminum alloy A380 (“S”). Outlet boxes and covers shall be
finished with aluminum lacquer.
Outlet boxes and covers shall be Red•Dot
Catalog No. _______________
®
*Less than .004 copper content.
** S Boxes - Die cast aluminum alloy A380
H30
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H31
®
Dry-tite Round Boxes, Extensions & Covers
Extensions
Boxes
Cat. No.
Color
Hub Size
Description
Silver
Silver
d"
f"
5 outlets, cast
mounting lugs,
4 closure plugs
Silver
Bronze
White
Silver
Bronze
White
d"
d"
d"
f"
f"
f"
d"
f"
Cat. No.
Color
Hub Size
Description
Silver
Silver
d"
f"
4 outlets
4 closure plugs,
gasket and
screws
Four Outlets, 41⁄8" Diameter
Five Outlets, 41⁄8" Diameter
S-47
S-48
SE-47
SE-48
D-PAK *
®
DS-47
DS-47-BR
DS-47-WH
DS-48
DS-48-BR
DS-48-WH
DS-47-B
DS-48-B
with blank cover
with blank cover
Seven Outlets, 41⁄8" Diameter
Silver
S-71
d"
7 outlets, cast
mounting lugs,
4 closure plugs
H
Red•Dot
Round Lampholder Covers
®
Standard Covers
Jumbo Covers
Cat. No.
Color
Hub Size
Description
Silver
Silver
Silver
d"
f"
d"
One tapped hole
One tapped hole
Three tapped holes
Silver
Bronze
White
Silver
Bronze
White
d"
d"
d"
d"
d"
d"
One tapped hole
One tapped hole
One tapped hole
Three tapped holes
Three tapped holes
Three tapped holes
Gasket and Screws, 41⁄8" Diameter
S-1-RD
S-12
S-3-RD
S-1
S-12
Cat. No.
Color
Hub Size
Description
Gasket and Screws, 41⁄2" Diameter
SJ-11
Silver
d"
One tapped hole
SJ-21
Silver
d"
Two tapped holes
SJ-31
Silver
d"
Three tapped holes
D-PAK *
®
DSS-1
DSS-1-BR
DSS-1-WH
DSS-3
DSS-3-BR
DSS-3-WH
S-3
ROUND BLANK COVERS
Cat. No.
Color
Description
SS-B
Silver
Weatherproof
cover with
gasket and
screws
41⁄8" Diameter
Cat. No.
Color
Description
CCRSB
White
Mounting
holes 2f" on
center (not Raintight)
CCRB
White
Mounting
holes 3d" on
center (not Raintight)
5" Diameter
NOTE: Boxes are Raintight when used with appropriate Red•Dot boxes. All covers packed
with gasket and screws.
* See Pages H48-H50 for complete D-PAK assortment
®
®
D-PAK *
®
DCCRB
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
White
H31
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H32
®
Dry-tite Round Boxes, Extensions & Covers
Outlet Boxes, Extensions and Covers
SE-47
SE-48
S-47
S-48
S Series
Cat. No.
Red•Dot
®
H
S-47
SE-47
S-71
S-48
SE-48
SS-B
S-1
S-12
S-3
SJ-B
SJ-11
SJ-21
SJ-31
H32
Hub Size
A
B
C
D
E
F
G
H
CI
d"
d"
d"
f"
f"
4a
4a
4a
4a
4a
4a
4a
4a
4a
4d
4d
4d
4d
1e
1e
1e
1e
1e
Y
1p
c
1h
c
c
1
1
f
1i
f
g
1i
5l
4n
4n
4n
3a
3h
3a
3a
3h
1b
5l
5l
3d
3d
3d
3d
3d
17.0
18.3
16.3
17.0
18.3
d"
f"
d"
d"
d"
d"
1b
1b
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H33
®
Dry-tite Lampholders, Garden Lights & Accessories
L-80
L-80-D
L-800
Applications:
• Security and general outdoor lighting fixture for residential and
commercial applications.
• Accent lighting fixture for highlighting outdoor signs and
architectural details.
• Compact outdoor lighting fixture which can be mounted easily
in most places and can be aimed in any direction.
Heat resistant
gasket
Porcelain
socket
Corrosion
resistant
metal
Features/Benefits:
H
Locking
arm
®
Standard Materials:
• Fixture: Certified die cast zinc alloy ZAMAK 3.
• Gasket: Heat resistant composition or high-temperature silicone.
• Socket: Center contact, porcelain, medium base.
Standard Finish:
Ground
screw
• Aluminum lacquer finish.
• Chrome plated zinc.
Compliances
• UL Listed.
• Suitable for use in Wet Locations.
Sample Specifications:
• Lampholders shall be certified die cast zinc alloy ZAMAK 3.
Lampholder will have positive locking mounting arm and
replaceable socket. Fixture shall be Red•Dot Dry-tite .
Catalog No. _______________for use with _______________ watt
incandescent lamp.
®
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
Red•Dot
• Clean lines and precision manufacturing result in a fixture
which will enhance any application.
• High-quality replaceable porcelain socket with hightemperature leads allow for easy field maintenance.
• Positive locking mounting arm keeps fixture in aimed position
to reduce costly call-backs.
• Ground screw boss in arm.
H33
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H34
®
Dry-tite Lampholders, Garden Lights & Accessories
Lampholders, Die Cast Zinc Zamak 3
Decorative Floodlight
Cat. No.
Color
Lamp Max.
Description
L-80
Silver
150W•
PAR 38
or R40
Inside gasket
and ground
screw
Standard
D-PAK *
DL-80
DL-80-BR
DL-80-WH
Silver
Bronze
White
L-80-D
Silver
Cat. No.
Color
Lamp Max.
Description
2L80D2
White
150W•
PAR 38
or R40
Two lampholders
round cover, inside
gaskets and
ground screws
®
D-PAK *
D2L80S3 Silver
®
Portable Spotlights
Gasketed
150W•
PAR 38
or R40
Heavy duty
slip-on gasket
and ground
screw
150W •
PAR 38
or R40
Cat. No.
Color
Lamp Max.
Description
K702
Silver
150W•
PAR 38
or R40
Standard lampholder,
ground spike,
wall bracket, gasket,
and screws
Inside gasket
and ground
screw
K780
Silver
150W•
PAR 38
or R40
Deep-shielded
lampholder,
ground spike,wall
bracket, gasket,
and screws
Mounts to
L-80 series
lampholders
Compact Quartz Fixture
Deep-Shielded
L-800
Red•Dot
®
H
Wireguard
LG-80
Cat. No.
Color
Lamp Max.
Description
HV-250-CFBR
Bronze
250W•
Minican
T4 quartz
Mighty Light
Heavy duty
fixture includes
mounting
plate, wire
nuts, and lamp
®
Lampholder Covers
Single Gang Lampholder Covers
LC-11
Cat. No.
Cat. No.
Standard
(2m" x 4d")
LC-11
Jumbo
(3a" x 5a")
LF11
Size
d"
LC-21
___
d"
LC-31
LF31
d"
Cat. No.
Color
Size
Round Lampholder Covers
Description
One hole
Device mount
Two hole
Device mount
Three hole
Device mount
Description
S-1, SJ-11, S-12
SJ-21
LC-21
D-PAK *
DLC-31
Silver
d"
DLC-31-BR
Bronze
d"
DLC-31-WH
White
d"
®
LC-31
H34
Three hole
Device mount
Three hole
Device mount
Three hole
Device mount
S-3, SJ-31
Cat. No.
Cat. No.
Size
Description
Standard
(4a" diameter)
S-1-RD
S-12
-S-3-RD
Jumbo
(4d" diameter)
SJ-11
-SJ-21
SJ-31
d"
f"
d"
d"
One hole
One hole
Two holes
Three holes
Cat. No.
Color
Size
Description
D-PAK *
DSS-1
DSS-1-BR
DSS-1-WT
DSS-3
DSS-3-BR
DSS-3-WT
Silver
Bronze
White
Silver
Bronze
White
d"
d"
d"
d"
d"
d"
One hole tapped
One hole tapped
One hole tapped
Three tapped holes
Three tapped holes
Three tapped holes
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H35
®
Dry-tite Lampholders, Garden Lights & Accessories
LC-11
LF-11
LC-31
LF-31
H
SS-B
SE-47
SE-48
S-3
SJ-B
SJ-11
SJ-21
SJ-31
Red•Dot
S-47
S-48
S-1
S-12
®
Dimensions in Inches
Cat. No.
S-47
SE-47
S-71
S-48
SE-48
SS-B
S-1
S-12
S-3
SJ-B
SJ-11
SJ-21
SJ-31
Hub Size
A
B
C
D
E
F
G
H
CI
d"
d"
d"
f"
f"
4a
4a
4a
4a
4a
4a
4a
4a
4a
4d
4d
4d
4d
1e
1e
1e
1e
1e
3⁄64
c
c
1
c
c
1
1
f
1i
f
g
1i
5l
4n
4n
4n
3a
3h
3a
3a
3h
1b
5l
5l
3d
3d
3d
3d
3d
16.0
18.3
16.0
16.0
18.3
d"
f"
d"
d"
d"
d"
CCRB
1b
1b
CCRSB
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H35
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H36
®
Dry-tite Lampholders, Garden Lights & Accessories
Photometrics
Photometrics are strictly a function of the lamp used.
L-80
L-800
Red•Dot
®
H
Mighty Lights
®
*Photometrics: Beam Spread Horizontal & Vertical 89º x 66º
HV-250-CFBR
*Data based on 250 Watt, T-4 quartz lamp rated 4850 lumens and is applicable to HV-250-CFBR fixture.
FOOT CANDLE FORMULA
CANDELA
LIGHT VALUE IN FOOT CANDLES
=
DISTANCE2
AT A GIVEN DISTANCE FROM BULB
H36
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H37
®
Dry-tite Lampholders, Garden Lights & Accessories
K330
K440
Applications:
• Lighting for walkways, paths or driveways.
• Accent lighting for garden and terrace areas.
• Ground level security lighting.
Features/Benefits:
• Certified zinc alloy provides increased corrosion resistance.
• High quality replaceable porcelain socket with high temperature
leads allows for easy field maintenance.
H
Red•Dot
Standard Materials:
®
• Fixture: Die cast zinc alloy ZAMAK 3.
• Globe: Lime crystal glass.
• Socket: Center contact, porcelain, medium base.
Standard Finish:
• Green aluminum lacquer finish.
• Bronze aluminum lacquer finish.
Compliances:
• UL Listed.
• Suitable for use in Wet Locations.
Sample Specifications:
• Fixture shall be certified die cast zinc alloy ZAMAK 3. Socket shall
be porcelain, center contact and replaceable. Socket shall have
extended leads for easy wiring. Fixture shall be Red•Dot Dry-tite
Catalog No. _______________
®
®
®
Dry-tite Garden Lights
Three Tier
Cat. No.
K330
K330BR
Four Tier
Color
Silver
Bronze
Lamp Max.
75W•
Description
12" extended
leads, gasket
and ground screw
Cat. No.
K440
K440BR
Color
Silver
Bronze
Lamp Max.
100W•
Description
12" extended
leads, gasket
and ground screw
• Lamp not included
* See Pages H48-H50 for complete D-PAK assortment
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H37
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H38
®
Dry-tite Lampholders, Garden Lights & Accessories
Garden Lights
K330
Red•Dot
®
H
K440
Photometrics:
Based on lamp center
24" above ground
Based on 100 Watt A-19
inside frosted 1750 lumen
lamp. For other wattage
see table below.
Wattage
100
75
60
50
40
25
Multiplier
1.0
.68
.44
.27
.26
.13
Iso Foot Candles
H38
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H39
®
SiteLight Overview
®
Step up to SiteLight Line Voltage Outdoor Lighting
Planning your Outdoor Lighting
We’ve Made
Installation Easy
Everything you need is
included in the SiteLight
Kit except a bulb, supply
cable and tools (screwdriver, wire strippers, etc.).
Only three connections are
required to wire each fixture
to the supply cable. With
SiteLight’s PVC in-ground
mounting tube, there is no
need to pour concrete to
secure the fixtures. Just
position the tube and pack
®
Grazing from side
or bottom to show
texture
Uplighting from
below makes details
stand out
Silhouetting from
behind provides drama
For decks, Post Sconce Lights mounted
on deck posts provide glare-free perimeter
lighting and mid-stair lighting. Post Top
Lights are ideal for lighting stairs and rails.
Use SiteLight Path Lights and Swivel
Lights for pathways, driveways and
general garden lighting. The chart below
will help you determine fixture spacing.
Bright & Even
Medium Dappled
Soft Mood
8' - 10'
12' - 18'
Over 20'
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
SiteLight Meets Every Outdoor
Lighting Need
• From soft, indirect deck lighting to
brilliant, focused spot lighting, use
SiteLight to beautify any property
while enhancing safety and security.
• Lighting for walkways, pathways,
and driveways.
• Stairway, perimeter, and task
lighting for decks.
• Accent and ambient lighting for
pool/patio and garden areas.
• Highlighting to emphasize
landscape details or specific
objects.
• Ground level safety/security lighting
to illuminate dark areas.
dirt around it. Attach your
SiteLight to the mounting
tube and your installation
is complete. Even tapping
a power source is easy
when you use SiteLight’s
Outside Outlet Power
Hook-Up Kit (K800).
SiteLights are designed
for a lifetime of trouble
free use. SiteLight is high
quality, permanent lighting
built to add value and
beauty to your home.
H39
H
®
Compare SiteLight to Low
Voltage Sets
• SiteLight is up to 5 times brighter
than low voltage - more light with
fewer fixtures than with low voltage
sets.
• SiteLight gives you flexibility in
spacing, the number of fixtures,
and the length of run. Light where
you need it. Low voltage sets have
a fixed limit on length of run and
the number of fixtures.
• SiteLight uses regular household
current - no expensive low voltage
transformer to purchase or replace.
• SiteLight uses readily available,
standard bulbs. Low voltage bulbs
are often found only where sets are
sold.
• SiteLight lets you add on fixtures
by tapping into run. Low voltage
sets will generate even less light if
transformers are at capacity.
SiteLights are permanent, all metal
fixtures guaranteed for a lifetime.
Red•Dot
On graph paper outline your home and
grounds. Indicate key features you wish to
highlight such as stairways, statuary,
shrubbery or flowering plants. SiteLight
Spot Lights and Swivel Lights provide
focused illumination to showcase these
areas.
The diagrams below show how you can
achieve 3 special lighting effects with
SiteLight Spot Lights and Swivel Lights.
For outdoor lighting, nothing
compares to the full power (120V)
and beauty of SiteLight. SiteLight
uses regular household voltage and
standard bulbs that are readily
available. There are no expensive
transformers to purchase or replace.
With SiteLight, you can add fixtures
when and where you want them and
still enjoy lighting that is up to five
times brighter than low voltage.
Use SiteLight to highlight gardens,
statuary, shrubbery and to effectively
light decks, stairs, pathways, pools
and driveways. SiteLight meets
every outdoor lighting need... from
soft, indirect deck lighting to brilliant,
focused spot lighting. Use SiteLight
to beautify your property while
enhancing safety and security.
Step up to SiteLight line voltage
outdoor lighting and add permanent
value to your home.
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H40
®
SiteLight Lampholders, Garden Lights & Accessories
K811BR
K822BR
K841BR
K861BR
Applications:
• Lighting for walkways, pathways, and driveways.
• Stairway, perimeter, and task lighting for decks.
• Accent and ambient lighting for pool/patio and garden areas.
• Highlighting to emphasize landscape details or specific objects.
• Ground level safety/security lighting to illuminate dark areas.
Red•Dot
®
H
Features/Benefits:
• Copper-free* aluminum construction provides increased corrosion resistance.
• Sturdy die cast aluminum construction provides durability.
• Architectural bronze color blends into landscape and deck areas.
• High quality, replaceable porcelain socket with brass screw shell (except
K851BR, K852BR).
• Aluminum mounting tube cap houses and protects wire connection (ground
installed fixtures).
• PVC ground tube provides an innovative installation method saving costly
labor and traditional installation materials (ground installed fixtures).
• Wire connectors and ground wire allow safe, easy power connections.
• Tempered glass lens and silicon gaskets keep socket dry (K831BR,
K841BR, K861BR).
• Positive locking arm can be adjusted to the desired position (K831BR,
K841BR, K861BR).
• Fixtures use regular household voltage (120V) and standard indoor bulbs.
Standard Materials:
• Fixture: Die cast aluminum alloy A360 with less than .004 copper content
(copper-free).
• Lens: Tempered glass (K831BR, K841BR, K861BR).
• Lens: Polycarbonate (K811BR, K812BR, K821BR, K822BR, K851BR).
• Socket: Porcelain, center contact, brass screw shell, medium base
(K811BR, K812BR, K821BR, K822BR, K831BR, K841BR, K861BR), molded
plastic socket with candelabra base (K851BR and K852BR).
• Mounting Tube: Gray PVC, schedule 40 (ground installed fixtures).
Standard Finish:
• Bronze aluminum lacquer finish.
K851BR
K852BR
Quality Construction
Rustproof cast aluminum
Top removes easily for
bulb replacement
Shatterproof Lens
Porcelain Socket with
brass screw shell
Architectural Bronze color
blends into landscape
Aluminum Base for durability
Stainless Steel Screws
Aluminum Mounting Tube
Cap houses wire connections
Wire Connectors and
Ground Wire for safe, easy
power connections
13" PVC Mounting Tube
provides a permanent base
for fixture and large opening
to feed wires
Compliances:
• UL Listed.
• Suitable for use in Wet Locations.
• Ground mounting (suitable for use 4' or less above grade level) except
K852BR and K861BR.
Sample Specifications:
• Fixture shall be die cast copper-free* aluminum alloy A360, with bronze
aluminum laquer finish. Sockets shall be porcelain, center contact, brass
screw shell-medium base for K811BR, K812BR, K821BR, K822BR, K831BR,
K841BR and K861BR fixtures. Sockets shall be molded plastic with
candelabra screw base for K851BR and K852BR fixtures. All sockets shall
have extended leads for easy wiring.
*Less than .004 copper content.
H40
Easy to Install:
• Only 3 wire connections per fixture are required.
• No need to pour concrete.
• All connections are made above ground.
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H41
®
SiteLight Lampholders, Garden Lights & Accessories
Distance in inches of mounting height
10.8
10
5
ISO Foot Candles
Values based on .45 ft.
mounting height and
a 40 Watt A15 clear
400 lumen lamp.
2
10
5.4 10
20
0
1
7.5" Path Light
Cat. No.
Description
Lamp Required
Spacing
.5
7.5" Path Light with 13" x 2"
schedule 40 PVC mounting tube
K811BR
5.4
10.8
A15 40W(max) / 120V
medium base
16.2
8' - 10' apart: bright and even,
12' - 18' apart: medium dappled
20' or more: soft mood.
21.6
0
5.4
10.8
16.2
21.6
27
32.4
Distance in inches of mounting height
37.8
7.5" Path Light
K811BR
16.08
5
2
1
Distance in inches of mounting height
5
8.04 5
10
ISO Foot Candles
Values based on .67 ft.
mounting height and
a 40 Watt A15 clear
400 lumen lamp.
0
10" Path Light
Cat. No.
Description
Lamp Required
Spacing
.5
K812BR
8.04
16.08
10" Path Light with 13" x 2"
schedule 40 PVC mounting tube
A15 40W(max) / 120V
medium base
24.12
8' - 10' apart: bright and even,
12' - 18' apart: medium dappled
20' or more: soft mood.
36.16
0
8.04
H
16.08 24.12 32.16 40.2
48.24
Distance in inches of mounting height
10.8
5
2
Distance in inches of mounting height
ISO Foot Candles
Values based on .45 ft.
mounting height and
a 40 Watt A15 clear
400 lumen lamp.
0
1
7.5" Dome Path Light
Cat. No.
Description
®
10
10
5.4 10
Red•Dot
10" Path Light
K812BR
Lamp Required
Spacing
.5
K821BR
5.4
10.8
7.5" Path Light with 13" x 2"
schedule 40 PVC mounting tube
A15 40W(max) / 120V
medium base
16.2
8' - 10' apart: bright and even,
12' - 18' apart: medium dappled
20' or more: soft mood.
21.6
0
5.4
10.8
16.2
21.6
27
32.4
Distance in inches of mounting height
37.8
7.5" Dome Path Light
K821BR
16.08
2
5
1
Distance in inches of mounting height
5
8.04
0
5
5
ISO Foot Candles
Values based on .67 ft.
mounting height and
a 40 Watt A15 clear
400 lumen lamp.
.5
10" Dome Path Light
Cat. No.
Description
Lamp Required
Spacing
.2
K822BR
8.04
16.08
7.5" Path Light with 13" x 2"
schedule 40 PVC mounting tube
A15 40W(max) / 120V
medium base
24.12
8' - 10' apart: bright and even,
12' - 18' apart: medium dappled
20' or more: soft mood.
36.16
0
8.04
16.08 24.12 32.16 40.2
48.24
Distance in inches of mounting height
56.28
10" Dome Path Light
K822BR
ISO Foot Candles
Values based on 3 ft.
setback from a vertical
wall and a 100 Watt
incandescent 1321
lumen lamp.
Distance in inches of mounting height
216
.02
.05
180
.1
144
Ground Spot Light
Cat. No.
Description
Lamp Required
Spacing
.2
K841BR
108
.5
1
Ground Spot Light with 13" x 2"
schedule 40 PVC mounting tube
72
2
One to two for each object to be
highlighted or as required for
special lighting effects.
.002
5
36
R20 100W(max) / 120V
medium base
.005
10
.01
0
0
K841BR
36
72
108
144
180
216
Distance in inches of mounting height
Ground Spot Light
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H41
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H42
®
SiteLight Lampholders, Garden Lights & Accessories
ISO Foot Candles
Values based on 1ft.
mounting height and
a 60 Watt A15 incandescent 740 lumen
lamp tilted 45˚ degrees.
24
Distance in inches of mounting height
.2
2
.5
12 1
20
Description
Lamp Required
Spacing
0
50
K831BR
12
10
5
.5
24
17.5" Swivel Light with 13" x 2"
schedule 40 PVC mounting tube
General lighting:
A15 60W(max) /
120V medium base
Spot lighting:
R16 60W(max) /
120V medium base
1
36 .01
.2
.05
.1
.02
48
0
12
24
36
48
60
72
Distance in inches of mounting height
84
General lighting:
8' - 10' apart: bright and even,
12' - 18' apart: medium dappled
20' or more: soft mood.
Spot lighting:
one to two for each object to be
highlighted
17.5" Swivel Light
K831BR
ISO Foot Candles
Values based on 1ft. mounting height
from light opening of luminaire to ground
stair and a 10 Watt
G121/2 80 lumen lamp
on lens 1ft. above
ground or stair.
Distance in inches of mounting height
24 .002.005
H
17.5" Swivel Light
Cat. No.
12
.2
.5
0
K851BR
2
5
Post Sconce Light
Cat. No.
12 1
Description
Lamp Required
Post Sconce Light with metal
back plate, and mounting hardware
Spacing
G12d 10W(max) / 120V
candelabra base
On each post or every other post,
depending on desired brightness.
Mounts to standard 4X4 post.
.05
.1
.001
.02
.01
24
.005
36
.002
.001
48
12
24
36
48
60
72
Distance in inches of mounting height
84
Post Sconce Light
K851BR
ISO Foot Candles
Values based on 4 ft. mounting height
from center of light
opening to base of deck
and a 15 Watt G161/2
100 lumen lamp.
Distance in inches of mounting height
96
.05
48
Post Top Light
Cat. No.
Description
Lamp Required
Spacing
0
48
.05
.02
96
K852BR
.05
.05
.05
Post Top Light with metal
back plate, and mounting hardware
G16d 15W(max) / 120V
candelabra base
On each post or every other post,
depending on desired brightness.
Mounts to standard 4X4 post.
.02
.01
.005
144 .002
.001
.0005
.0002
192 .0001
0
48
96
144
192
Distance in inches of mounting height
Post Top Light
K852BR
192
ISO Foot Candles
Values based on 8 ft.
mounting height and
a 100 Watt 1321 lumen
lamp tilted 45˚ degrees.
.05
.02
.2
Distance in inches of mounting height
Red•Dot
®
0
96
.1
0
96
.5
.1
K861BR
.1
192
.05
Description
Wall Spot with cover, (box
not included)
Lamp Required
Spacing
R20 100W(max) / 120V
medium base
One to two on most average size
decks or exterior walls.
.02
288
.01
.001
.002
384 .0005
96
K861BR
Wall Spot
Cat. No.
.005
192
288
384
480
576
Distance in inches of mounting height
672
Wall Spot
Outside Outlet Power Hook-up Kit
H42
Cat. No.
Finish
K800
Silver
Description
Outside Outlet Power
Hook-up Kit with ground
wire, ground screw and
five close-up plugs
Hub
Size
f”
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
No. of
Outlets
Top
Bottom
Side
Side
2
2
1
1
Total
6
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H43
®
Site-light Lampholders, Garden Lights & Accessories
K811BR
Zonal Lumen Summary
5b"
3a"
5b"
Zone Deg
1b"
2j"
1h"
d
7"
7d"
Lumens
3.6
6.2
17.1
80.7
17.4
18.3
19.3
19.3
100.0
Total Luminaire Efficiency = 37.4%
0
2
3
4
5
11
28
33
34
21
3
2
1
1
1
0
0
0
-
ISO Foot Candles
Values based on .45 (5.4") foot mounting height
and a 40 watt A15 clear 400 lumen lamp
(10.8")
10
5
2
10
10
(5.4")
20
0
1
.5
H
(5.4")
(10.8")
(16.2")
®
4
4
6
7
6
7
11
30
31
32
30
24
3
2
2
1
1
0
0
0
0
1.4
2.3
6.4
30.2
6.5
6.8
7.2
7.2
37.4
Red•Dot
Candela
0
5
15
25
35
45
55
65
75
85
90
95
105
115
125
135
145
155
165
175
180
% of total
output
5
9
26
121
26
27
29
29
150
Distance in Units of Mounting Height
13a"(±b)
Deg
0-30
0-40
0-60
0-90
90-120
90-130
90-150
90-180
0-180
Lumens
% of lamp output
based on 400
lumens
(21.6")
(5.4")
(10.8")
(16.2")
(21.6")
(27")
(32.4")
(37.8")
Distance in Units of Mounting Height
K812BR
5b"
3a"
5b"
Zonal Lumen Summary
1b"
2j"
Zone Deg
1h"
10"
10"
0-30
0-40
0-60
0-90
90-120
90-130
90-150
90-180
0-180
Lumens
% of lamp output
based on 400
lumens
% of total
output
1.4
2.3
6.4
30.2
6.5
6.8
7.2
7.2
37.4
3.6
6.2
17.1
80.7
17.4
18.3
19.3
19.3
100.0
5
9
26
121
26
27
29
29
150
Total Luminaire Efficiency = 37.4%
Candela
0
5
15
25
35
45
55
65
75
85
90
95
105
115
125
135
145
155
165
175
180
4
4
6
7
6
7
11
30
31
32
30
24
3
2
2
1
1
0
0
0
0
ISO Foot Candles
Values based on .67 (8.04") foot mounting height
and a 40 watt A15 clear 400 lumen lamp
Lumens
0
2
3
4
5
11
28
33
34
21
3
2
1
1
1
0
0
0
-
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
(16.08")
Distance in Units of Mounting Height
13a"(±b)
Deg
5
2
1
5
5
(8.04")
10
0
.5
(8.04")
(16.08")
(24.12")
(36.16")
(8.04") (16.08") (24.12") (36.16") (40.2") (48.24")
Distance in Units of Mounting Height
www.tnb.com
H43
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H44
®
SiteLight Lampholders, Garden Lights & Accessories
4l"
3a"
K821BR
Zonal Lumen Summary
% of lamp output
based on 400
lumens
4b"
Zone Deg
1
2j"
1h"
7d"
7d"
®
Red•Dot
Candela
0
5
15
25
35
45
55
65
75
85
90
95
105
115
125
135
145
155
165
175
180
2
2
3
4
4
6
10
29
31
31
22
3
1
1
0
0
0
0
0
0
0
K822BR
Lumens
% of total
output
0.7
1.3
4.8
27.8
1.5
1.6
1.6
1.6
29.4
2.4
4.5
16.3
94.6
5.2
5.4
5.4
5.4
100.0
Total Luminaire Efficiency = 29.4%
0
1
2
2
4
10
27
32
33
4
1
1
0
0
0
0
0
0
-
ISO Foot Candles
Values based on .45 (5.4") foot mounting height
and a 40 watt A15 clear 400 lumen lamp
10
(10.8")
5
2
10
(5.4")
10
1
0
.5
(5.4")
(10.8")
(16.2")
(21.6")
(5.4")
(10.8")
(16.2")
(21.6")
(27")
(32.4")
(37.8")
Distance in Units of Mounting Height
4l"
Zonal Lumen Summary
3a"
4b"
3
5
19
111
6
6
6
6
118
Distance in Units of Mounting Height
H
13a"(±b)
Deg
0-30
0-40
0-60
0-90
90-120
90-130
90-150
90-180
0-180
Lumens
% of lamp output
based on 400
lumens
1
Zone Deg
2j"
1h"
10"
10"
0-30
0-40
0-60
0-90
90-120
90-130
90-150
90-180
0-180
Lumens
3
5
19
111
6
6
6
6
118
% of total
output
0.7
1.3
4.8
27.8
1.5
1.6
1.6
1.6
29.4
2.4
4.5
16.3
94.6
5.2
5.4
5.4
5.4
100.0
Total Luminaire Efficiency = 29.4%
H44
Candela
0
5
15
25
35
45
55
65
75
85
90
95
105
115
125
135
145
155
165
175
180
2
2
3
4
4
6
10
29
31
31
22
3
1
1
0
0
0
0
0
0
0
Lumens
0
1
2
2
4
10
27
32
33
4
1
1
0
0
0
0
0
0
-
ISO Foot Candles
Values based on .67 (8.04") foot mounting height
and a 40 watt A15 clear 400 lumen lamp
(16.08")
Distance in Units of Mounting Height
13a"(±b)
Deg
5
2
1
5
(8.04")
5
5
0
.5
.2
(8.04")
(16.08")
(24.12")
(36.16")
(8.04") (16.08") (24.12") (32.16") (40.2") (48.24") (56.28")
Distance in Units of Mounting Height
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H45
®
SiteLight Lampholders, Garden Lights & Accessories
K831BR
5"
General Lighting
Zonal Lumen Summary
3a"
2d"
Zone Deg
Lumens
% of lamp output
based on 740
lumens
0-30
0-40
0-60
0-90
90-180
0-180
65
105
134
137
0
137
8.7
14.2
18.1
18.5
0.0
18.5
3a" Dia.
5"
1d"
14e"
ISO Foot Candles
Values based on 1 (12") foot mounting height and a
60 watt A15 incandescent 740 lumen lamp tilted 45°
2 j"
1
79
81
82
73
67
33
4
3
0
0
0
(24")
8
23
34
41
25
3
3
0
0
-
.2
13a"(±b)
2
.5
1
(12")
20
0
H
50
(12")
10
5
.5
(24")
1
(36")
.01
.2
®
Distance in Units of Mounting Height
3h"
Dia.
Lumens
Red•Dot
Candela
0
5
15
25
35
45
55
65
75
85
90
47.2
77.0
97.7
100.0
0.0
100.0
Total Luminaire Efficiency = 18.5%
b"
Deg
% of total
output
.05
.1
.02
(48")
(12")
(24")
(36")
(48")
(60")
(72")
(84")
Distance in Units of Mounting Height
Spot Lighting
Zonal Lumen Summary
3a"
Zone Deg
5"
d"
Lumens
% of lamp output
based on 299
lumens
% of total
output
39
68
111
116
0
116
12.9
22.8
37.2
38.7
0.0
38.7
33.5
58.9
96.2
100.0
0.0
100.0
0-30
0-40
0-60
0-90
90-180
0-180
Total Luminaire Efficiency = 38.7%
ISO Foot Candles
Values based on 1 (12") foot mounting height and a
40 watt R16 incandescent 299 lumen lamp tilted 45°
b"
2 j"
1
Candela
0
5
15
25
35
45
55
65
75
85
90
45
45
45
47
47
38
16
4
0
0
0
(24")
Lumens
Distance in Units of Mounting Height
Deg
4
13
22
29
29
14
4
0
0
-
(12")
.2
.510
2
20
1
0
(12")
5
(24")
1
.1
.5
(36")
.2
(48")
.005 .01 .02
(12")
.05
(24")
.1
(36")
(48")
(60")
(72")
(84")
Distance in Units of Mounting Height
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H45
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H46
®
SiteLight Lampholders, Garden Lights & Accessories
Zonal Lumen Summary
K841BR
Zone Deg
Lumens
% of lamp output
based on 1321
lumens
0-30
0-40
0-60
0-90
90-120
90-130
90-150
90-180
0-180
104
165
214
219
0
0
0
0
219
7.9
12.5
16.2
16.6
0.0
0.0
0.0
0.0
16.6
3a"
3a" Dia.
5e"
6e"
l"
3f"
% of total
output
47.7
75.3
97.7
100.0
0.0
0.0
0.0
0.0
100.0
b"
Total Luminaire Efficiency = 16.6%
3h" Dia.
1i"
ISO Foot Candles
Values based on 3 (36") foot setback from a vertical
wall and a 100 watt incandescent 1321 lumen lamp
2 j"
1
Candela Distribution Horizontal Degrees
0.0 45.0
90.0 135.0 180.0 FLUX
136
132
124
121
77
12
6
1
0
0
0
136
133
125
117
106
35
9
4
0
0
0
136
136
128
126
125
93
14
6
2
0
0
136
138
131
122
122
109
31
8
3
1
1
(216")
13
36
56
61
37
11
4
1
0
-
Red•Dot
®
H
136
132
127
124
58
9
5
0
0
0
0
Distance in Units of Mounting Height
Vertical Degrees
13a"(±b)
0
5
15
25
35
45
55
65
75
85
90
Legend
0-deg:
90-deg:
180-deg:
Note: This iso footcandle
diagram was produced
by tilting the photometric
data for this luminaire
45• above horizontal
.02
.05
(180")
.1
(144")
.2
(108")
.5
1
(72")
2
5
(36")
10
0
.01
(36")
(72")
.005 .002
(108")
(144")
(180")
(216")
Distance in Units of Mounting Height
K851BR
Zonal Lumen Summary
3c"
37°
3b"
Zone Deg
1c"
3c"
3c"
Lumens
0-30
0-40
0-60
0-90
90-180
0-180
% of lamp output
based on 80
lumens
% of total
output
4.5
7.7
11.0
11.6
0.0
11.6
38.7
66.3
94.3
100.0
0.0
100.0
4
6
9
9
0
9
1l"
Total Luminaire Efficiency = 11.6%
0°
ISO Foot Candles
Values based on 1 (12") foot mounting height from
light opening of luminaire to ground stair and a 10
watt G12 80 lumen lamp on lens 1 foot above
ground or stair
0
5
15
25
35
45
55
65
75
85
90
5
6
6
7
7
6
0
0
0
0
0
5
6
6
7
7
5
1
0
0
0
0
5
6
6
6
6
3
1
0
0
0
0
5
5
2
1
1
1
1
0
0
0
0
5
3
0
0
0
0
0
0
0
0
0
d
0
1
2
3
2
1
0
0
0
-
(24")
Legend
0-deg:
90-deg:
180-deg:
Distance in Units of Mounting Height
Vertical Degrees
Candela Distribution Horizontal Degrees
0.0 45.0
90.0 135.0 180.0 FLUX
.002 .005
(12")
.2
.5
0
5
(12")
1
.1
(24")
2
.05
.001
.02
.01
.005
(36")
.002
(48")
.001
(12")
(24")
(36")
(48")
(60")
(72")
(84")
Distance in Units of Mounting Height
H46
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H47
®
SiteLight Lampholders, Garden Lights & Accessories
K852BR
Zonal Lumen Summary
5a" Dia.
Zone Deg
Lumens
% of lamp output
based on 100
lumens
0-30
0-40
0-60
0-90
90-180
0-180
1
1
5
10
0
10
0.9
1.3
5.5
10.4
0.0
10.4
5"
e"
4c"
4c"
1b"
3c"
SQ.
% of total
output
8.7
12.8
52.7
100.0
0.0
100.0
Total Luminaire Efficiency = 10.4%
ISO Foot Candles
Values based on 4 (48") foot mounting height from
center of light opening to base of deck and a 15
watt G16d 100 lumen lamp
0
5
15
25
35
45
55
65
75
85
90
1
2
1
1
1
1
5
6
0
0
0
1
1
1
1
1
1
3
5
0
0
0
1
1
1
1
1
1
3
5
0
0
0
1
1
1
1
1
1
4
5
0
0
0
1
1
1
1
1
1
6
7
0
0
0
0
0
0
0
1
4
5
0
0
-
(96")
.2
.05
Distance in Units of Mounting Height
Vertical Degrees
Candela Distribution Horizontal Degrees
0.0 22.5
45.0
67.5
90.0 FLUX
0
.05
.05
H
.02
(48")
.05
.05
(96")
.02
.01
.005
.002
.001
.0005
(144")
Red•Dot
.0
.0002
.0001
(192")
®
Legend
0-deg:
45-deg:
90-deg:
(48")
(48")
(96")
(144")
(192")
Distance in Units of Mounting Height
K861BR
Zonal Lumen Summary
3a"
5k"
Lumens
% of lamp output
based on 1321
lumens
% of total
output
103
177
301
317
0
317
7.8
13.4
22.8
24.0
0.0
24.0
32.4
56.0
94.9
100.0
0.0
100.0
2d"
Zone Deg
3 / " Dia.
4
8
5k"
3a" Dia.
l"
0-30
0-40
0-60
0-90
90-180
0-180
Total Luminaire Efficiency = 24.0%
b"
2n"
0
5
15
25
35
45
55
65
75
85
90
Candela
128
128
123
120
119
109
44
11
5
0
0
ISO Foot Candles
Values based on 8 (96") foot mounting height and
a 100 watt 1321 lumen lamp tilted 45°
Lumens
12
35
56
75
83
41
11
5
0
-
(192")
.2
Distance in Units of Mounting Height
Deg
.05
.02
.2
(96")
1
0
(96")
.5
.1
.1
(192")
.05
.02
(288")
.01
.001
(384") .0005
.005
.002
(96")
(192")
(288")
(384")
(480")
(576")
(672")
Distance in Units of Mounting Height
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H47
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H48
®
D-Pak Merchandising System
DALB
DIH3-1-LM
DCCD
D2L80S3
Applications:
• Dry-tite boxes and covers protect wiring
devices, switches, electronic components and
terminal blocks in Dry, Damp and Wet Locations.
• Junction for branch conduits.
-“A” Series bodies for Rigid and Intermediate
Metal Conduit (IMC) conduit maintain a weather
resistant conduit system when used with covers
and gaskets.
-“B” Series bodies for thin wall conduit Electrical
Metallic Tubing (EMT) saves cost of connector
and labor in indoor applications.
• Accessible wiring chamber provides a
convenient location to maintain or change a
system, pull conductors and make splices.
®
Red•Dot
®
H
Features/Benefits:
• Combination packaging of conduit body, cover
and gasket reduces handling and inventory costs.
• Selection of colored finishes - silver, bronze and
white - match most widely used finishes in
commercial and residential construction.
• Reduced quantities in easy-to-store cartons.
Saves labor and handling, reduces error and
handling costs.
• Bar coding on carton and product.
• See-through wrapper provides instant
identification and protects product on job site.
• Easy to read labels speeds selection, handling
and storage.
Easy to read
descriptive labels
Label shows actual
product color
Labor saving 2
piece carton
Combination pack
of conduit body,
cover & gasket
Choice of silver,
bronze or white
finish
Protective
see-through
shrink wrap
Standard Materials:
• Refer to appropriate section in this catalog.
Standard Finish:
• Aluminum lacquer finish.
• Colors - Silver, Bronze & White.
Compliances:
• UL Listed.
• CSA Certified.
• Federal Spec. W-C-586.
H48
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H49
®
D-Pak Merchandising System
®
The D-PAK Merchandising System attracts attention with bold
graphics and encourages self-service with clean, easy-to-read labels.
• Bold red, black, and white descriptive merchandising labels.
• Labor saving 2-piece carton.
• Combination pack of conduit body, cover and gasket.
• Choice of finish: silver, bronze or white.
• English, Spanish, and French instructions.
• Protective see-through wrap.
Boxes
Single Gang - with mounting lugs, two plugs and ground screw
Cat. No.
Hub Size
Color
Outlets
DIH3-1-LM
DIH3-1-LM-BR
DIH3-1-LM-WH
DIH3-2-LM
DIH3-3-LM
d"
d"
d"
f"
1"
Silver
Bronze
White
Silver
Silver
Top 1
Bottom 1
Back 1
Total 3
DIH4-2-LM
DIH4-1-LM-BR
DIH4-1-LM-WH
DIH4-2-LM
d"
d"
d"
f"
Silver
Bronze
White
Silver
Top 2
Bottom 1
Back 1
Total 4
DIH5-1-LM
DIH5-2-LM
d"
f"
Silver
Silver
Top 2
Bottom 2
Back 1
Total 5
Three Outlets
Conduit Bodies with Covers and Gaskets
Cat. No.
Rigid IMC
EMT
Hub Size
Through Feed
Four Outlets
d"
f"
1"
Back Opening
DALB-1-CG
DALB-2-CG
DALB-3-CG
DALB-4-CG
DALB-5-CG
DALB-6-CG
DBLB-1-C•
DBLB-2-C•
DBLB-3-C•
d"
f"
1"
1b"
1d"
2"
Five Outlets
Left Side Opening
DALL-1-CG
DALL-2-CG
DALL-3-CG
d"
f"
1"
Two Gang - with mounting lugs, two plugs and ground screw
Three Outlets
D2IH3-1
d"
Silver
Right Side Opening
DALR-1-CG
DALR-2-CG
DALR-3-CG
d"
f"
1"
Top 1
Bottom 1
Back 1
Total 3
Round - with cast mounting lugs, four plugs and ground screw
Five Outlets
T-Style
DAT-1-CG
DAT-2-CG
DAT-3-CG
d"
f"
1"
DS-47
DS-47-BR
DS-47-WH
DS-48
DS-48-BR
DS-48-WH
Service Entrance Bodies
Cat. No.
d"
d"
d"
f"
f"
f"
Silver
Bronze
White
Silver
Bronze
White
Side 4
Bottom 1
Total 5
Hub Size
• Body and cover only
Back Opening
DASLB-1
DASLB-2
DASLB-3
d"
f"
1"
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H49
®
(Raintight)
DAC-1-CG
DAC-2-CG
DAC-3-CG
H
Red•Dot
Cat. No.
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H50
®
D-Pak Merchandising System
Device Covers
Lampholders
Cat. No.
Color
Description
Duplex receptacle cover, horizontal
DCCD
Silver
DCCD-BR
Bronze
DCCD-WH
White
Device mount
Duplex receptacle cover, vertical
DCCDV
DCCDV-BR
DCCDV-WH
Silver
Bronze
White
Device mount
GFCI receptacle cover, horizontal.
DCCG
DCCG-BR
DCCD-WH
Silver
Bronze
White
Device mount
®
Color
Description
DL-80
DL-80-BR
DL-80-WH
Silver
Bronze
White
Inside gasket
and ground screw,
150W PAR 38 max.
lamp
D2L80S3
Silver
Two lampholders and
cover with three d"
holes, gasket, screws
and plug
Standard
Floodlight
Lampholder Cover
H
Red•Dot
Cat. No.
Cat. No.
GFCI receptacle cover, vertical
DCCGV
DCCGV-BR
DCCGV-WH
Hub Size
Color
Description
DLC-31
DLC-31-BR
DLC-31-WH
d"
d"
d"
Silver
Bronze
White
Three d"
holes. Supplied
with gasket,
screws and
plug
DSS-1
DSS-1-BR
DSS-1-WH
DSS-3
DSS-3-BR
DSS-3-WH
d"
d"
d"
d"
d"
d"
Silver
Bronze
White
Silver
Bronze
White
Single Gang
Silver
Bronze
White
Device mount
Round
Blank Covers
Cat. No.
Color
Description
DCCB
DCCB-BR
DCCB-WH
Silver
Bronze
White
Device mount
Single Gang
Device mount
with gasket,
screws and
plug
Plugs
Cat. No.
Two Gang
D2CCB
Silver
Device mount
DCCRB
White
5" round cover
with mounting
holes 3d" on
center (not Raintight)
DPLG-1
DPLG-1-BR
DPLG-1-WH
DPLG-2
Hub Size
Color
d"
d"
d"
f"
Silver
Bronze
White
Silver
Round
H50
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H51
Kits
Kits
Cat. No.
Description
Color
CS212
CS212BR
CS212WH
Traditional 2 Lamp Round Box Kit
Silver
Bronze
White
CS228
CS228BR
CS228WH
Contemporary 2 Lamp Round Box Kit
Silver
Bronze
White
CS312
CS312BR
CS312WH
Duplex Weatherproof Outlet Device Kit
Silver
Bronze
White
CS212
H
Silver
CS780BR
Contemporary Stake Light w/Cord
Bronze
CS902
CS902BR
CS902WH
Traditional 2 Lamp, Round Box w/Photocell Kit
Silver
Bronze
White
®
GFCI Weatherproof Outlet Device Kit
Red•Dot
CS315
CS228
CS312
CS315
CS780BR
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
CS902
www.tnb.com
H51
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H52
An open
and shut case
for meeting the “while-in-use” NEC Code requirement!
Need to comply with the new 2002 NEC Code 406.8(B)
for weatherproof in-use covers?* No problem!
Thomas & Betts has the exact covers you need for
compliance, with the brand names you know and
trust, Red•Dot and Steel City.
• Available in both rugged die-cast aluminum or
non-metallic with clear Lexan lids
• All feature single-unit convenience for faster,
easier installation — no confusing, time-consuming
punch-outs
• Full range — single gang or double gang
• Unique key-lock option
Available now from your
Thomas & Betts Distributor.
®
Red •Dot
®
Die-cast aluminum,
100% copper-free with
integral locking tab.
®
®
Steel City
®
Non-metallic with clear cover.
Unique lip design provides
water-tight seal.
* NEC, Section 406.8(B) (1) 15- and 20-Ampere, 125- and 250-volt receptacles installed outdoors in a wet
location shall have an enclosure that is weatherproof whether or not the attachment plug cap is inserted.
Ask your Thomas & Betts sales rep for
your free copy of the Thomas & Betts
Code Changes 2002.
Steel City • Red•Dot • Superstrut • Union • Bowers
®
®
®
®
®