GE Energy
The other
coolest thing
in the garage.
Introducing GE WattStation™ Wall Mount
imagination at work
Electric vehicles
deserve the best.
The EV charger you’ve been looking for! In only 4-8 hours the GE WattStation
Wall Mount delivers a full-cycle charge to a 24 kWh battery. Compare that to
the 12-18 hours it would take with an ordinary outlet.
Modern design
Why not select a charger that looks as good as it works?
With its smart, timeless design, the WattStation is the
perfect complement to any EV.
Simplicity itself
Plug the EV in and let it charge! A green backlit charging icon will
illuminate to signal that the EV is in the process of charging.
When charging is complete, simply wrap the cord around the
charging station, keeping it organized and out of the way.
Safe for
everyone.
A power button
on the front
ensures zero
energy consumption
when not in use.
The WattStation delivers peace of mind,
with ground fault protection and clearly
labeled LED charging and fault status
indicators. An LED ring surrounds the
plug inlet and will illuminate white when
the charging station is powered on or
in standby mode.
A power button on the front of the
WattStation allows for zero energy
consumption when the unit is not
in use.
Meeting UL and fire safety standards,
GE’s WattStation safely charges EVs.
Installation– not a problem.
Installation couldn’t be easier. With easy to install mounting brackets, the WattStation is
a convenient solution for your electric vehicle charging needs.
A sturdy mounting plate with heavy-duty screws and a key lock keep the WattStation securely
in place and prevent unwanted removal from the wall.
A step-by-step installation video is available for contractors and homebuilders.
The GE WattStation should be installed by a certified electrician or contractor.
Step-by-step
installation
and maintenance
instructions
Inside or outside,
it’s one tough cookie.
We’ve built a charger for garages that’s rugged enough to
put outdoors. Its NEMA 3R rating means it shrugs off rain and
sleet, even a coating of ice.
Hardwired or Plug In Unit
The WattStation Wall Mount can either be hardwired for more permanent installations
or plugged in to a NEMA 6-50 receptacle (not included) for simple removal of the unit.
Choose the option that works best for you. It can be installed in new or existing construction.
Hardwired
Plug In
Ordering Information
Type
Enclosure
Catalog No.
Dimensions
Weight
Black, Hardwired
NEMA 3R
EVWSWBH
16”W x 24”H x 6”D (40.62cm x 60.96cm x 15.24cm)
33 lbs (14.969 Kg)
Black, NEMA 6-50P plug
NEMA 3R
EVWSWBC
16”W x 24”H x 6”D (40.62cm x 60.96cm x 15.24cm)
33 lbs (14.969 Kg)
Standards Compliance
•
•
•
•
•
•
•
SAE J1772
NEC 625
cETL and ETL listed
UL 2594
cUL 2594
ADA Compliance
NEMA and NIST
GE Energy
41 Woodford Avenue
Plainville, CT 06062
www.geindustrial.com
© 2011 General Electric Company
The GE WattStation
Wall Mount…
what the EV has been waiting for.
www.geindustrial.com/EV
Follow us on twitter: @GE_IndSolutions
WattStation™ is a trademark of General Electric Company.
Information provided is subject to change without notice. Please verify all details with
GE. All values are design or typical values when measured under laboratory conditions,
and GE makes no warranty or guarantee, express or implied, that such performance
will be obtained under end-use conditions.
DEA-528 8/11