Guide to Products Conforming
to International Standards
®
CE Marking
Page 1
TSSA Standards
Page 16
ATEX Directive
Page 9
China Compulsory Certification System (CCC)
Page 17
UL/cUL Standards
Page 11
GOST-R
Page 19
CSA Standards
Page 14
P-E11-1B
CE Marking
“CE” came originally from the French “Communauté Européenne” (the European Community,
predecessor of the European Union) and now stands for “Conformité Européenne” (European Conformity).
As of November 2013
Purpose of CE Marking
CE marking signifies that the product or device to which it is
applied meets all essential requirements of applicable EC directives.
Since January 1995, all products and devices exported to EU
member countries must carry a CE mark.
CE marking is a standard managed by the European Committee for Standardization (CEN) and the European Committee
for Electrotechnical Standardization (CENELEC). Certification
and CE marking are essential for exports to Europe.
In this respect, products and devices subject to EC directives
that are exported from Japan to EC member countries or distributed in such markets must conform to the relevant EC directives.
By preparing a Declaration of Conformity and affixing the CE
mark, the manufacturer itself, usually in a process of “self-certification,” states that its product or device is safe and in compliance – and on that basis is free to distribute it within EU
member countries and various other countries.
Without the CE mark showing compliance, distribution in EU
member countries is not allowed.
Countries Requiring CE Marking
CE marking is required in EU countries. It is also required by,
among others, Norway, Iceland and Liechtenstein as members of trading communities in Europe such as the European
Free Trade Association (EFTA), and by Turkey, which does
not belong to either the EU or the EFTA (as of November
2010).
EC Directives and EN Standards
EC directives require EU member countries to incorporate a
specified result into their domestic laws and are formally
called “Directive of the European Parliament and of the
Council on the Approximation of the Laws, Regulations and
Administrative Provisions of the Member States.” As a result,
national laws throughout the member countries are made
consistent and technical obstacles are eliminated. Products
covered by EC directives are required to show conformity with
such directives through the affixing of the CE mark.
Major directives related to SMC products are as follows:
Low Voltage Directive
This directive applies to equipment
with rated voltage between 50 and
1000 VAC or between 75 and 1500
VDC, and requires prevention of
electrical danger.
EMC Directive
This directive relates to electromagnetic
compatibility (EMC), and requires prevention of electromagnetic noise emissions with adverse effects on other
equipment, and protection (emissions
immunity) from electromagnetic noise
emitted by other equipment.
Machinery Directive
This directive applies to industrial machinery, primarily machine tools, injection molding machines and automated
machines, and requires all essential
safety items.
EC directives give required results, not details of designs or design standards, test standards or the like. Such details are then
described in EN standards, which are harmonized standards.
Subject Products
Included are medical devices, simple pressure vessels, building materials, gas-fuel-fired equipment and body protective
gear, as well as toy safety and machine safety. All prescribed
products must carry CE marks. In order to use the CE mark, a
document showing that the product meets required standards
is necessary.
Affixing CE Marks and Declaration of Conformity
Affixing the CE mark means that the manufacturer itself has
determined that the product conforms to applicable EC directives. The manufacturer is responsible for affixing the mark,
usually in association with a declaration of conformity.
If there is a safety problem with a product or device bearing
the CE mark and the product had been properly used, or if
nonconformity with EC directives is determined, the relevant
EU member country may take appropriate action. It can restrict free movement of the product or device, remove it from
the market, prohibit shipment, operation and use, and more.
SMC’s Support
For almost all its products falling under EC directives, in order to make its self-declarations more reliable, SMC clarifies criteria for
the applicable standards and reaffirms safety.
1
Caution on ordering CE marking compliant products (How to Order)
For a product with a  mark in the column “-Q optional,” be sure to include “-Q” at the end of the product number.
For a product with no  mark, there is no need to add “-Q.” CE may not be applicable depending on the model
(specifications). For details, refer to “Guide to Products Conforming to International Standards” on SMC website.
As of November 2013
List of CE Marking Compliant Products
-Q optional
 Pilot Operated 4/5 Port
Solenoid Valves
Series
Options not CE-compliant
SJ2000/3000
SJ3A6/Vacuum Release Valve with Restrictor
SY3000/5000/Connector Connecting Base

SY3000/5000/7000/9000
AC specification (applicable to DIN terminal)
SV1000/2000/3000/4000
EX120 type serial transmission (Symbol: F1, H, J1, J2)

SYJ3000/5000/7000
AC specification (applicable to DIN terminal)

SZ3000

SX3000/5000/7000

VZ1000/3000/5000
VF1000/3000/5000
EX120 type serial transmission (Symbol: F1, H, J1, J2)
AC specification (applicable to DIN terminal),
plug-in type, solenoid assembly single unit
AC specification (applicable to DIN terminal,
conduit terminal)
S0700

VQ1000/2000/Base Mounted

VQ0000/1000/2000/Body Ported
AC specification (applicable to DIN terminal), EX120
type serial transmission (Symbol: F1, H, J1, J2)
AC specification (applicable to 100 VAC or less)

VQ0000/1000/Base Mounted
AC specification (applicable to 100 VAC or less)

VQ4000

VQ5000
VQC1000/2000
VQC4000
 Pilot Operated 3 Port
Solenoid Valves

VQZ1000/2000/3000

SQ1000/2000 (New)
AC specification (applicable to DIN terminal)

VZS2000/3000

VFS1000/2000/3000/4000/5000/6000

VFR2000/3000/4000/5000/6000

VFN2000N

VQ7-6/VQ7-8

SYJ300/500/700
AC specification (applicable to DIN terminal)

VQZ100/200/300

VZ100/300/500
AC specification (applicable to DIN terminal)
AC specification (applicable to DIN terminal),
solenoid assembly single unit

VZ200/400
Non plug-in specification (applicable to DIN terminal)

VG342
AC specification (applicable to DIN terminal,
conduit terminal)
Excluding DIN terminal type electrical entry

VP3145/3165/3185
Excluding DIN terminal type electrical entry

VFN200N
VP300/500/700
 Direct Operated 3/4/5 Port
Solenoid Valves
VV061
VV100

V100
AC specification
SY100
AC specification
S070

VQ100

VQD1000
AC specification (applicable to 100 VAC or less)

VQD1000-V/Vacuum/Release Unit

VKF300
AC specification

VK300
Grommet-type electrical entry

VK3000
Grommet-type electrical entry

VT307 (New VT307)
Excluding DIN terminal type electrical entry

VT307/317/325
Excluding DIN terminal type electrical entry
2
CE Marking
Caution on ordering CE marking compliant products (How to Order)
For a product with a  mark in the column “-Q optional,” be sure to include “-Q” at the end of the product number.
For a product with no  mark, there is no need to add “-Q.” CE may not be applicable depending on the model
(specifications). For details, refer to “Guide to Products Conforming to International Standards” on SMC website.
As of November 2013
List of CE Marking Compliant Products
-Q optional
 PneumaticElectro Relay

Series
VR3200/3201
 Two Hand
Control Valve
VR51
 Serial Transmission System/
Fieldbus System
EX120/121/122/123
Options not CE-compliant
Use with 125 VDC or more, or AC
Communication protocol: SSL1, SSL2, SUW1, SUH1
EX124/126
EX140
Communication protocol: SSL1, SSL2, SUW1, SUH1
EX180
EX260
EX250
EX600
EX500
EX510
EX9-OET/OEP/PE1
 Air-hydro
Units

CCT160

CCV
 Stroke Reading Cylinders/
Length Measuring
Excluding DIN terminal type electrical entry
CEP1
CE1
CEU5
AC specification
CEU1
AC specification
CE2
 Valve Mounted
Cylinders
CVQ
 Auto Switches
D-/Solid state
CVQM
Not applicable to D-J51
D-/Reed
D-P3DWl
 Vacuum Ejector/Vacuum Pump
System
ZK2 (Ejector System/Vacuum Pump System)
ZB (Ejector System/Vacuum Pump System)

ZX/Ejector System

ZX/Vacuum Pump System
AC specification, suction verification switch specification

ZR/Ejector System
AC specification

ZR/Vacuum Pump System
AC specification

ZM
AC specification

ZQ/Ejector
ZQ/Vacuum Pump System
AC specification
AC specification

3
AC specification, suction verification switch specification
Caution on ordering CE marking compliant products (How to Order)
For a product with a  mark in the column “-Q optional,” be sure to include “-Q” at the end of the product number.
For a product with no  mark, there is no need to add “-Q.” CE may not be applicable depending on the model
(specifications). For details, refer to “Guide to Products Conforming to International Standards” on SMC website.
As of November 2013
List of CE Marking Compliant Products
-Q optional
 Air Tank

 Refrigerated
Air Dryers
Series
Options not CE-compliant
VBAT
IDFAlE
IDFAlF
IDHl
 Clean Air Module
 Soft Start-up Valve
LLB

 Electro-Pneumatic
Regulators
AV2000/3000/4000/5000
Grommet-type electrical entry
ITV0000
ITV1000/2000/3000
ITV0090
ITV2090
ITVX
 Electro-Pneumatic
Proportional Valve
 Pressure Gauges
PVQ

GP46
Use with 250 VAC
PPA
4
CE Marking
Caution on ordering CE marking compliant products (How to Order)
For a product with a  mark in the column “-Q optional,” be sure to include “-Q” at the end of the product number.
For a product with no  mark, there is no need to add “-Q.” CE may not be applicable depending on the model
(specifications). For details, refer to “Guide to Products Conforming to International Standards” on SMC website.
As of November 2013
List of CE Marking Compliant Products
-Q optional
 Pressure Switches/Sensors
Series
Options not CE-compliant
ZSE30A(F)/ISE30A
ZSE40A(F)/ISE40A
ZSE10(F)/ISE10
ISE35
ISE70/75/75H
ZSE80(F)/ISE80(H)
ZSE3/ISE3
ZSE1/ISE1
ZSE2/ISE2

PS1000/1100/1200
ISA2
ISA3
PSE53l
PSE54l
PSE55l
PSE56l
PSE200
PSE300
IS10
IS3000

ISG
ZSM1
 Flow Switches/Sensors
PFM
PFMB
PFMV
PF2A
PF2A7l/High Flow Rate Type
LFE
PF3W
PF2W
PF2D
PF2l20l
 Static Electricity Elimination
Equipment

IFW5

IF3
IZS40/41/42
IZS31
IZN10
IZF10
IZD10
IZE11
IZH10
IZE110-X238
5
Contact 2ab specification, MPa/PSI double notation
Caution on ordering CE marking compliant products (How to Order)
For a product with a  mark in the column “-Q optional,” be sure to include “-Q” at the end of the product number.
For a product with no  mark, there is no need to add “-Q.” CE may not be applicable depending on the model
(specifications). For details, refer to “Guide to Products Conforming to International Standards” on SMC website.
As of November 2013
List of CE Marking Compliant Products
-Q optional
 2/3 Port Solenoid Valves for
Fluid Control
Series
Options not CE-compliant
VX21/22/23 (New VX)
VXK21/22/23
VXD21/22/23
VXD (New VXD)
VXZ22/23
VXZ (New VXZ)
VXS22/23
VXE

VXH
VXF
Not applicable to the controller dedicated for operation (VXF)
VX31/32/33
 2/3 Port Valves for
Special Purposes

VCH41/42/410

VDW
VDW-XF
 2 Port Valves for
Fluid Control
 2/3 Port Valves for
General Purpose
Fluid Control

VQ20/30

LVM

VCA

VCB

VCL

VCS

VCW

VNA
Excluding DIN terminal type electrical entry

VNB
Excluding DIN terminal type electrical entry
SGC


SGH
VNC
VNH
 Process Pump
(Diaphragm Style Pump)
PB1011A
 Temperature
Control
Equipment
HRS
HRSH
Excluding DIN terminal type electrical entry
Excluding DIN terminal type electrical entry
Not applicable to air-cooled 200 V type and water-cooled 200 V type
HRZ
HRZ/Double inverter type
HRZD
HRW
HEC002-A (Air-cooled)
HEC006-A (Air-cooled)
HEC001/003-W (Water-cooled)
HEC006/012-W (Water-cooled)
HEB
HED
6B
CE Marking
Caution on ordering CE marking compliant products (How to Order)
For a product with a  mark in the column “-Q optional,” be sure to include “-Q” at the end of the product number.
For a product with no  mark, there is no need to add “-Q.” CE may not be applicable depending on the model
(specifications). For details, refer to “Guide to Products Conforming to International Standards” on SMC website.
As of November 2013
List of CE Marking Compliant Products
-Q optional
 High Vacuum
Equipment
Series
Options not CE-compliant

XLl
AC specification

XLS
AC specification

XSA
AC specification
 Electric Actuators/Cylinders
LJ1 Driver: LECSA
LJ1 Driver: LECSB, LECSC, LECSS
LG1 Driver: LECSA
LG1 Driver: LECSB, LECSC, LECSS
LTF Driver: LECSA
LTF Driver: LECSB, LECSC, LECSS
LECSA
LECSB, LECSC, LECSS

LXF Controller: LC6D
Standard motor specification (Non-standard motor specification is applicable depending on the model.)

LXP Controller: LC6D
Standard motor specification (Non-standard motor specification is applicable depending on the model.)

LXS Controller: LC6D
Standard motor specification (Non-standard motor specification is applicable depending on the model.)

LC6D
LZB/LZC
LC3F2
 Electric Actuators
LEY Controller: LECP6
LEY Controller: LECA6
LEY Controller: LECP1
LEY Controller: LECPA
LEY Driver: LECSA
LEY Driver: LECSB, LECSC, LECSS
LEYG Controller: LECP6
LEYG Controller: LECA6
LEYG Controller: LECP1
LEYG Controller: LECPA
LEYG Driver: LECSA
LEYG Driver: LECSB, LECSC, LECSS
LEF Controller: LECP6
LEF Controller: LECA6
LEF Controller: LECP1
LEF Controller: LECPA
LEF Driver: LECSA
LEF Driver: LECSB, LECSC, LECSS
LEJ Driver: LECSA
LEJ Driver: LECSB, LECSC, LECSS
LEL Controller: LECP6
LEL
Controller: LECP1
LEM Controller: LECP6
LEM Controller: LECP1, LECP2
LES Controller: LECP6
LES Controller: LECA6
LES Controller: LECP1
LES Controller: LECPA
LEPY/LEPS‌Controller: LECP6
LEPY/LEPS Controller: LECP1
LEPY/LEPS Controller: LECPA
7
Caution on ordering CE marking compliant products (How to Order)
For a product with a  mark in the column “-Q optional,” be sure to include “-Q” at the end of the product number.
For a product with no  mark, there is no need to add “-Q.” CE may not be applicable depending on the model
(specifications). For details, refer to “Guide to Products Conforming to International Standards” on SMC website.
As of November 2013
List of CE Marking Compliant Products
-Q optional
 Electric Actuators
Series
Options not CE-compliant
LER Controller: LECP6
LER Controller: LECP1
LER Controller: LECPA
LEHZ Controller: LECP6
LEHZ Controller: LECP1
LEHZ Controller: LECPA
LEHF Controller: LECP6
LEHF Controller: LECP1
LEHF Controller: LECPA
LEHS Controller: LECP6
LEHS Controller: LECP1
LEHS Controller: LECPA
LECP6
LECA6
LECP1
LECP2
LECPA
LECSA
LECSB, LECSC, LECSS
LEC-G
LEC-T1
LAT3
LATC4
 Electro-Pneumatic Positioner/
Smart Positioner

IP8000/8100 (Lever Type/Rotary Type)

IP8001/8101 (Lever Type/Rotary Type)
8
ATEX Directive
Directive 94/9/EC
Equipment and Protective Systems intended for use in potentially Explosive Atmospheres
As of November 2013
Outline of ATEX Directive
Since 1st July 2003, equipment used in potentially explosive atmospheres within the EU is required to comply with the ATEX
directive.
 CE Marking and ATEX
All equipment within the scope of the Directive must bear the CE marking and comply with the directive's requirements. ATEX
directive incorporates conventional European standards for explosion-proof equipment.
 Objective of the ATEX directive
Major objective of the ATEX directive is as follows:
Preventing electrostatic discharge
Preventing ignition likely to be caused by electrical sparks generated from friction, shock, and wear
Preventing ignition under the influence of elevated temperatures due to friction, shock, and wear
Concentrating on the duties of the manufacturers
Certifying equipment to the ATEX directive by Zone/Category
 Zone/Category classification
The ATEX directive defines the categories of equipment and protective systems,
which can be used in the corresponding zones as per the following table:
Zone
Equipment
category
Presence of
the explosive atmosphere
Zone 0
Category 1
Continuously or for long periods
> 1000 hours/year
Zone 1
Category 2
Occasionally
10 to 1000 hours/year
Zone 2
Category 3
Rarely or for short periods
< 10 hours/year
Zone 0
Category 1
Zone 2
Category 3
Zone 1
Category 2
SMC’s Support
 Applicable models
SMC's products that are within the scope of the ATEX directive include electrical equipment and mechanical equipment such as
pneumatic actuators (cylinders). SMC prepares pneumatic equipment for all industries that is compliant to the ATEX directive to
help our customers make a system corresponding to the Directive.
 Certification Procedure
Our products are categorized to electrical and non-electrical products, and tested and certified as following procedure:
(
ATEX
Category
9
Electrical products
Solenoid valve, Auto switch, Serial Transmission System,
Electro-pneumatic positioner, etc.
Certification method
)
Certified by
Non-electrical products
(Cylinder, Rotary actuator, etc.)
Certification method
Certified by
Category 1
1. Technical file
2. Quality audit
3. Type approval test
Certification authority
Certification authority
Certification authority
1. Technical file
2. Quality audit
3. Type approval test
Certification authority
Certification authority
Certification authority
Category 2
1. Technical file
2. Quality audit
3. Type approval test
Certification authority
Certification authority
Certification authority
1. Technical file (to be stored in the
certification authority)
2. Quality: In-house manufacturing control
SMC
Category 3
1. Technical file
2. In-house production control
SMC
SMC
1. Technical file
2. In-house production control
SMC
SMC
SMC
Caution on ordering ATEX compliant products
Some models may not be compliant with the ATEX directive. For details, refer to “How to Order”. For Self Declaration of Conformity, refer to our sales representative.
As of November 2013
List of ATEX Compliant Products
1
 Directional
Control Valves
5 Port Solenoid Valve/52-SY5000/7000/9000
5 Port Solenoid Valve/56-VQC1000/2000/4000
 Serial Transmission System
Integrated type/For input/output/56-EX250
Decentralized type (GW system, 4-branch)/56-EX500
 Air Cylinders
Air Cylinder/55-C76
ISO Standard Air Cylinder/55-C85
ISO Standard Air Cylinder/55-C95 (Bore size 160, 200, 250)
ISO Standard Air Cylinder/55-C96
ISO Standard Air Cylinder/55-CP96
ISO Standard Air Cylinder/55-C55
Air Cylinder/55-CG1
Air Cylinder/55-CS1
Compact Cylinder/55-CQ2
Dual Rod Cylinder/55-CXS
Mechanically Jointed Rodless Cylinder Basic Style/55-MY1B
Mechanically Jointed Rodless Cylinder Slide Bearing Guide Style/55-MY1M
Mechanically Jointed Rodless Cylinder Linear Guide Style/55-MY1H
 Auto Switches
Solid State Auto Switch
Reed Auto Switch
 Rotary Actuators
Rotary Actuator/55-CRB1
Rotary Actuator/56-CRB1
Rotary Actuator/55-CRB2
Rotary Actuator/56-CRB2
Rotary Actuator/Free mount type/55-CRBU2
Rotary Actuator/Free mount type/56-CRBU2
Compact Rotary Actuator/55-CRQ2
Compact Rotary Actuator/56-CRQ2
Category
2
3
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
 Booster Regulator
Booster Regulator/56-VBA
V
 Pressure Switch
2-Color Display Digital Pressure Switch/56-ISE70/75(H)
V
 Fluid Control Equipment
Steam Valve/56-VND
Valve for Water and Chemical Base Fluids (2/3 port air operated valve)/VCC
Air Operated Chemical Liquid Valve/Threaded type/55-LVA
Process Pump: Automatically Operated Type (Internal switching type)
Air Operated Type (External switching type)/55-PA3000/5000
Air Operated Type (External switching type)/56-PA3000/5000
 Pneumatic Instrumentation
Equipment
Pneumatic-Pneumatic Positioner/55-IP5000/5100
Pneumatic-Pneumatic Positioner/56-IP5000/5100
Electro-Pneumatic Positioner/IP8000-X14/IP8100-X14
Smart Positioner/52-IP8001/52-IP8101
Cylinder Positioner/56-IP200
V
V
V
V
V
V
V
V
V
V
10
®
UL/cUL Certification (Products conforming to UL/cUL, MET)
UL Standards (UL = Underwriters Laboratories Inc.)
As of November 2013
What are UL Standards?
Established with sponsorship by an organization of fire underwriters in 1894, in the wake of a major fire at the Chicago
World’s Fair in 1893, UL is a non-profit testing laboratory and
the standards body most recognized in the U.S. It examines
and tests devices, systems and materials to determine their
relation to hazards to life and property, and publishes standards and certifications.
Although UL certification is basically optional, a great many
electrical products made in the U.S. obtain UL certification.
Purpose of UL Standards
UL standards aim to remove risks of fire and electric shock
caused by electric products. Products in the U.S. generally
require certification by a Nationally Recognized Testing
Laboratory (NRTL).
Classification of UL Standards
UL standards relate to six technical sectors: (1) electrical
engineering; (2) fire prevention; (3) anti-theft and alarms; (4)
heating and air conditioning; (5) injuries and chemical injuries;
and (6) shipping engineering.
SMC’s products fall under electrical engineering.
Classification and Categories of UL Standards
UL standards certification includes listing certification and recognition certification.
®
Listing certification is generally of an end product, while recognition certification is for parts included within a product.
SMC’s valves and switches are basically considered parts to
be incorporated into a product, and are subject to recognition
certification.
Listing mark
Recognition mark
UL-certified products are assigned a CCN (Category Control Number) according to the product category. A CCN, in principle,
consists of four letters and a one-digit number.
UL Standards and CSA Standards
The United States and Canada have a Mutual Recognition
Agreement (MRA) providing for the recognition of certifications by the other. When a product is certified by UL based on
Mark for U.S.
Canadian standards (CSA standards), the certification mark
for the said product will be the C-UL mark shown below,
meaning conformity to CSA standards.
Mark for Canada
Mark for U.S./Canada
Listing mark
®
®
®
Recognition mark
∗The above certification marks are examples used UL (being an NRTL). Marks used by other NRTL’s are different.
11
Caution on ordering UL/cUL conforming products
UL may not be applicable depending on the model. For details, refer to
“Guide to Products Conforming to International Standards” on SMC website.
As of November 2013
List of UL/cUL Standards-Conforming Products
Product name/Series
 Pneumatic Solenoid Valves
Certification authority (NRTL)
Certification No. (File No.)
SJ2000/3000
UL
MH11419
SJ3A6/Vacuum Release Valve with Restrictor
UL
MH11419
SV1000/2000/3000/4000
UL
MH11419
*30-SY3000/5000/7000/9000
UL
MH11419
*30-SY300/500
UL
MH11419
* For the SY series only, add 30- at the beginning of the model number.
 Serial Transmission System
EX180
UL
E209424
EX260
UL
E209424
EX250
UL
E209424
EX600
UL
E209424
EX500
UL
E209424
EX510
UL
E209424
EX9-OET/OEP/PE1
UL
E209424
 Auto Switch
D-P3DWAl
UL
E241549
 Refrigerated
Air Dryer
IDFBlE
UL
SA13222
 Electro-Pneumatic
Regulators
ITV1000/2000/3000
UL
E240666
ITV2090
UL
E240666
ITVX
UL
E240666
ZSE30A(F)/ISE30A
UL
E216656
ZSE40A(F)/ISE40A
UL
E216656
ZSE10(F)/ISE10
UL
E216656
ISE70/75/75H
UL
E216656
ZSE80(F)/ISE80(H)
UL
E216656
ISE35
UL
E216656
PSE54l
UL
E216656
PSE55l
UL
E216656
PSE56l
UL
E216656
PSE300
UL
E216656
PFM
UL
E216656
PFMB (200 L type only)
UL
E216656
PFMV
UL
E216656
PF3W
UL
E216656
IZS31
UL
E310396
IZD10
UL
E216650
IZE11
UL
E216656
IZN10
UL
E310396
 Pressure Switches/Sensors
 Flow Switches/
Sensors
 Static Electricity Elimination
Equipment
12
®
UL/cUL Certification (Products conforming to UL/cUL, MET)
Caution on ordering UL/cUL conforming products
UL may not be applicable depending on the model. For details, refer to
“Guide to Products Conforming to International Standards” on SMC website.
As of November 2013
List of UL/cUL Standards-Conforming Products
Product name/Series
 2/3 Port Solenoid
Valves for
Fluid Control
 Temperature
Control
Equipment
 Electric Actuators
13
Certification authority (NRTL)
Certification No. (File No.)
VX21/22/23
UL
MH11419
VXD21/22/23
UL
MH11419
VXZ22/23
UL
MH11419
VX31/32/33
UL
MH11419
VCW20/30/40
UL
MH11419
HRS
MET
E112803
HRZ
UL
E229305
HRZ/Double inverter type
UL
E229305
HRW
UL
E229305
HEC002-A (Air-cooled)
ITSNA
3054524
HEC006-A (Air-cooled)
MET
E112803
HEC001/003-W (Water-cooled)
MET
E112803
HEB
MET
E112803
LEY (Except AC servo motor type)
UL
E339743
LEYG (Except AC servo motor type)
UL
E339743
LEF (Except AC servo motor type)
UL
E339743
LEL
UL
E339743
LES/LESH
UL
E339743
LEPY/LEPS
UL
E339743
LER
UL
E339743
LEH
UL
E339743
LEMB
UL
E339743
LEMC
UL
E339743
LEMH/HT
UL
E339743
CSA Standards (ANSI/UL Conforming Products)
CSA = Canadian Standards Association
As of November 2013
What are CSA Standards?
CSA standards are safety standards in Canada for electrical appliances, medical devices, machinery, equipment,
etc. The Canadian Standards Association was established
in 1919 as a non-profit, non-governmental standardization
organization. In the CSA Group today, the Canadian Standards Association develops standards and CSA International conducts product testing and certification.
Purpose of CSA Standards
CSA standards regulate safety of applicable electrical products. In all ten provinces and two territories of Canada, laws
require that electrical machinery and appliances connected to
power sources conform to CSA safety standards regardless of
type or quantity. In this respect, meeting CSA standards is
mandatory for applicable electrical products.
Relationship between CSA Standards and Canadian National Standards
Although CSA standards are standards developed voluntarily
by CSA members, many of them have been formally adopted
as Canadian national standards and are referred to in laws
and regulations by the national government, provincial governments and local authorities.
CSA standards adopted as Canadian national standards are
identified with a prefix code of “CAN.” (Ex.: CAN/CSA C22.1)
Relationship with UL Standards
CSA standards are for products in Canada. CSA-conforming
products with NRTL/C certificates are, however, under a Mutual Recognition Agreement (MRA) between Underwriters
Laboratories Inc. (UL) of the U.S. and CSA, recognized as
meeting testing standards equivalent to those of UL – although they are not UL conforming products in the U.S.
Classification of Standards
CSA Standards are roughly classified into nine groups.
Within the nine major groupings of (1) Lifestyle and environment, (2) Environmental engineering, (3) Electricity and electronics, (4) Communications and information, (5) Construction, (6) Energy, (7) Transport and distribution, (8) Material
engineering and (9) Commercial and production management
systems, more than 1,500 kinds of standards have been developed and published.
Classification of Certifications
CSA classifies certifications according to kind of products as
shown below.
Label: Electrical products used at home
Re-examination: Electrical products other than those above
Component Acceptance
SMC products are in the re-examination category.
CSA Standards Related to Electrical Safety
CSA standards related to electrical safety are indicated by
standard numbers of C22.1 and C22.2, and collectively constitute the Canadian Electrical Code Part1and Part2, respectively. These standards related to each other as follows.
 CAN/CSA C22.1 Canadian Electrical Code Part!
Safety Standard for Electrical Installation
This standard constitutes indoor wiring regulations, covering
from where the service wire reaches the consumer’s house to
the end connection of each load (socket or other connection
point to power source for electrical machinery and appliances).
 CAN/CSA C22.2 Series Canadian Electrical Code Part@
Part2 comprises a series of about 300 kinds of individual
standards for electrical machinery, appliances and their parts
and materials, which are used by connection to power sources wired according to regulations in Part1.
 CAN/CSA C22.2 No.0 General Requirements
There are regulations common to the CAN/CSA C22.2 series
and are always used in combination with individual standards.
 C22.2 No.0.0 Series
Common testing methods, structures, etc., for the CAN/CSA
C22.2 series are consolidated and applied together with individual standards.
 CAN/CSA-E Series
SMC’s valves fall under C22.2 No. 139, Electrically Operated
Valve.
14
CSA Standards (ANSI/UL Conforming Products)
As of November 2013
Affixing CSA Mark and Relation with UL
and CSA to test, assess and certify compliance with U.S.
standards.
The U.S. and Canada have a Mutual Recognition Agreement
(MRA) making possible unified certification. UL is recognized
by the Standards Council of Canada (SCC) as a certification
authority (CO) and a testing organization (TO), while CSA is
recognized as an NRTL by the U.S. Occupational Safety and
Health Administration (OSHA), which makes it possible for UL
to test, assess and certify compliance with CSA standards,
CSA conforming products tested and certified by UL are
called C-UL certified products (C-UL mark) and UL conforming products tested and certified by CSA are called CSA certified products (CSA NRTL mark).
C-UL Mark and CSA NRTL Mark
Standard
Certification body
Mark for U.S.
Mark for Canada
Mark for both U.S. and Canada
UL certified products
UL conforming products
CSA certified products
CSA conforming products
Certified/conforming in both countries
®
Recognition
mark
®
®
Testing/certifying
by UL
Listing
mark
(UL certified products)
UL mark
(CSA conforming products)
C-UL mark
(UL certified products/CSA conforming products)
C-UL mark
(CSA certified products)
CSA mark
(CSA certified products/UL conforming products)
CSANRTL/CSAus mark
Testing/certifying
by CSA
C
US
(UL conforming products)
CSANRTL/CSAus mark
US
SMC had CSA determine conformity to CSA standards and UL standards at the same time and obtained conformity recognition.
To indicate this, the above CSA NRTL/C mark is affixed on the product nameplate.
Caution on ordering CSA conforming products
CSA may not be applicable depending on the model. For details, refer to
“Guide to Products Conforming to International Standards” on SMC website.
List of CSA Standards-Conforming Products
Product name/Series
 Pneumatic Solenoid Valves
∗30-VFS2000/3000/4000/5000/6000
1901256 (LR67055)
∗30-VFR2000/3000/4000
1901256 (LR67055)
∗30-VZ1000/3000/5000
∗30-VF3000/5000
Note) Only DIN terminal
 Pressure Switch
15
Certification No. (File No.)
30-ISG2ll
LR67055
1901256 (LR67055)
* Add 30- at the beginning of the model number.
LR67049
TSSA Standards
As of November 2013
What are TSSA Standards?
Any equipment/component to be used in the Province of Ontario or some other provinces and incorporated in systems using
compressed gas (including compressed air) is required to obtain TSSA certification (certification for boilers and pressure vessels
in the Province of Ontario, Canada).
Applicable Laws and Regulations
Applicable laws are the Technical Standards and Safety Act (2000) and Ontario Provincial Law 220/01 (CSA B51).
Which Products Require TSSA Certification?
Pneumatic equipment with maximum pressure during use of 15 psi (0.1 MPa) or higher and with port size of 3/4” or larger is subject to the regulation. In this respect, SMC pneumatic products with a port size of 1 inch or larger are all subject to certification.
Certification Method
TSSA certification requires a Canadian Registration Number (CRN).
The Technical Standards and Safety Authority manages the CRN system.
TSSA Standards
TSSA standards-conforming products are shown below. Certification
has been obtained for the product series. As necessary, please
download certification forms (each form consists of five pages).
List of TSSA Standards-Conforming Products
Product name
Series
Soft Start-up Valve
AV5000, AVL5000
3 Port Hand Valve
VHS50
Regulator
AR50, AR50K, AR60, AR60K
Filter Regulator
AW60, AW60K
Pilot Operated Regulator
AR625, AR635, AR825, AR835, AR925, AR935
Pilot Type 2 Port Solenoid Valve
XP2270, VP2272, VXP2380, VXP2382
VXP2390, VXP2392
Air Filter
AF50, AF60
Large Flow Air Filter
AF800, AF810, AF811
Large Flow Air Filter
AF900, AF910, AF911
Main Line Filter
AFF22C, AFF37B, AFF75B
Odor Removal Filter
AMF550C, AMF650, AMF850
Mist Separator
AM550C, AM650, AM850
Water Separator
AMG550C, AMG650, AMG850
Micro Mist Separator
AMD550C, AMD650, AMD850
Micro Mist Separator with Pre-filter
AMH550C, AMH650, AMH850
Super Mist Separator
AME550C, AME650, AME850
Check Valve
AK6000
Check Valve
INA-14-89-14, INA-14-89-20
Large Flow In-line Type Speed Controller
AS600, AS800, AS900
Power Valve
VEX3700, VEX3701, VEX3702, VEX3900, VEX3901, VEX3902
Large Size 3 Port Solenoid Valve
VP3165, VP3185
16
China Compulsory Certification System (CCC)
CCC = China Compulsory Certification
As of November 2013
What are CCC Standards?
 Outline
Upon joining the World Trade Organization (WTO), China revised its previous certification system and the new China Compulsory
Certification (CCC) system was announced by the General Administration of Quality Supervision, Inspection and Quarantine
(AQSIQ) and the Certification and Accreditation Administration of the People’s Republic of China (CNCA).
Integrating the prior dual certificate systems, the new system was established according to international norms.
CCIB Mark
State Administration for
Entry-Exit Inspection and Quarantine of
the People's Republic of China (SAIQ)
CCEE Mark
China State Bureau of
Technical Supervision (CSBTS)
CCC Mark
General Administration of Quality Supervision,
Inspection and Quarantine (AQSIQ)
Since August 1, 2003, products not certified under the new system have been banned from importation or sale in China.
Applicable standards are the GB standards, meaning Chinese “National Standards” (electricity-related standards are issued
based on International Electrotechnical Commission (IEC) standards).
Relevant products must bear the CCC mark.
Products Subject to CCC
 First List of Products for Implementation of Chinese Compulsory Certification System
The following 22 kinds of products (159 items) are included in the first list of products subject to the new Chinese Compulsory
Certification System:
q Electrical wires and cables (5 items)
w Switches for circuits, installation protective and connection
devices (6 items)
e Low-voltage electrical apparatus (9 items)
r Small power motors (1 item)
t Electric tools (16 items)
y Welding machines (15 items)
u Household and similar electrical appliances (18 items)
i Audio and video apparatus (16 items)
(not including TV, audio equipment at the level of radio
broadcasting and car audio systems)
o Information technology equipment (12 items)
!0 Lighting apparatus (2 items) (not including lighting apparatus with voltage less than 36 V)
17
!1 Telecommunications terminal equipment (9 items)
!2 Motor vehicles and supplement safety parts (17 items)
!3 Motor vehicle tires (3 items)
!4 Safety glass (3 items)
!5 Agricultural machinery (2 items)
!6 Latex products (1 item)
!7 Medical devices (7 items)
!8 Fire fighting equipment (3 items)
!9 Safety technology: detectors for intruder alarm systems (4 items)
@0 Interior decoration products (3 items)
@1 Toys (6 items)
@2 Wireless systems and software (1 item)
As of November 2013
Scope
 Scope of Administration
A product administered under the new Chinese Compulsory
Certification system is required to bear the CCC mark when
imported or sold in China. The mark is not required for components of a product. This means that if a product otherwise
subject to the requirement is imported to or sold in China as a
component of another product (device), the CCC mark is not
required. The mark is required only when a product is imported to or sold in China as a separate item.
(1) Product to be imported/sold
Product not subject to CCC
CCC mark not required
Ex.) When an applicable auto switch is mounted on a cylinder
and it is exported as a cylinder with an auto switch, the
CCC mark is not required for the auto switch.
Import/sale as assembled and packed together
CCC mark not required
Air cylinder
(1) Product to be imported/sold
Product not subject to CCC
CCC mark not required
Imported/sold
(1) and (2)
separately
(2) Component
Component subject to CCC
CCC mark not required
Auto switch
Import/sale as packed separately
CCC mark not required
(2) Component
Component subject to CCC
CCC mark required
CCC mark required
Auto switch
Air cylinder
List of China Compulsory Certification (CCC)-Conforming Products
List of Products Subject to CCC and Those with CCC Certification [including specially ordered product numbers]
No.
HS code
Part no. Note)
Product name
3C-D-90A ∗/3C-D-93A ∗
Reed Auto Switch
3C-D-A34 ∗/3C-D-A44 ∗/3C-D-A54 ∗/3C-D-A64 ∗
3C-D-A72 ∗/3C-D-A73 ∗/3C-D-A80 ∗/3C-D-A90 ∗/3C-D-A93 ∗/
3C-D-A72H ∗/3C-D-A73H ∗/3C-D-A80H ∗/3C-D-A90V ∗/3C-D-A93V ∗
3C-D-B30 ∗/3C-D-B31 ∗/3C-D-B54 ∗/3C-D-B64 ∗
3C-D-B73 ∗/3C-D-B80 ∗
3C-D-C73 ∗/3C-D-C80 ∗/3C-D-E73A ∗/3C-D-E80A ∗
3C-D-P70 ∗/3C-D-P74 ∗/3C-D-P80∗
166
3C-D-R731 ∗/3C-D-R732 ∗/3C-D-R801 ∗/3C-D-R802 ∗
85365000
3C-D-Z72 ∗/3C-D-Z73 ∗/3C-D-Z80 ∗
3C-IS1000 ∗/3C-IS3000∗/3C-ISG∗/3C-IS2761- ∗/3C-IS10 ∗
Pressure Switch
3C-IS100- ∗/3C-IS101- ∗/3C-IS112- ∗/3C-IS113- ∗/3C-IS114- ∗
3C-ZSM1- ∗ 21 ∗
Pressure Gauge with
Switch
Flow Switch
3C-GP46- ∗
3C-IF3 ∗/3C-IFW5 ∗
Pneumatic-Electro Relay 3C-VR320 ∗
Note) P
roducts with standard product numbers (i.e., without “3C-“; for example, “D-A34∗” in contrast to “3C-D-A34∗”) cannot be exported to, or distributed or sold in
China as separate items. The items can, however, be exported to, distributed and sold in China when incorporated into a cylinder or device (including being
packed together).
[Explanation of symbols in the list]
· The mark “∗” stands for any number of additional alphanumeric characters or symbols.
· The mark “/ ” is used to separate one product number from another.
18
GOST-R
As of November 2013
What is GOST-R?
GOST-R is the commonly used name for the Federal Agency for Technical Regulation and Metrology (based on the previous name GOSSTANDART of RUSSIA), a
body involved with standardization, certification/accreditation and measurement.
Industrial products containing pneumatic products to be exported to (or sold in) the
Russian Federation are required to conform to standards prescribed by GOST-R. In
addition, a certificate of conformity (certification) is required at customs clearance.
SMC products have gone through procedures for certification as required in the
Russian Federation. A certificate of conformity can be issued for such products for
which GOST-R certificates of conformity have been obtained.
Please use a certificate of conformity when you export products to or distribute
products in the Russian Federation.
List of GOST-R Certificates of Conformity
No.
Certification No.
Product series
Nuts with inner screw 12 mm or less: LJ1-T8, NT, NTP, NTJ, RB, M, BM
1
-JP.A 43.B.00019
2
-JP.A 43.B.00020
3
-JP.A 43.B.00021
4
-JP.A 43.B.00022
Studs with rod diameter 12 mm or less: SV, SX, SY, AS
5
-JP.A 43.B.00023
Plug fitting and adapters made of brass and with screw diameter 12 mm or less: M, VS, RQ, VSK
6
-JP.A 43.B.00024
Screw, bolt and nuts made of brass with screw diameter 12 mm or less: M, N, 407, 408, 415, NT, KF, BM
7
C-JP.A 43.B.00130
11, 13, 63, 81, AFF, AM, AMC, AMD, AME, AMF, AMG, AMH, AMJ, AFD, AFM, AW, EBW, EBP, EC, EH, EHM,
EHK, EHR, EJ, EP, EPX, EZ, EZFN, EZD, EZF, IDF, IDG-DP, IDG-EL, INA, KT-, NAF, NAFM, NAL, NAR, NAV,
VXK
8
C-JP.A 43.B.00131
HEP
9
C-JP.A 43.B.00132
4901, 10-AS, 10-SY, 3VM, 50-VF, 50-VFE, 50-VPE, 52-SY, 55-VPA, 56-EVS, 56-PA, 56-SV, 56-VQC, AD,
ADH, ADM, AS, ASD, ASN, ASF, ASG, ASN, ASQ, ASR, ASS, ASV, AV, AVA, CCV, CCVL, CCVS, DVM,
DVMF, DXT334, DZ, DZ3, F66, FA, IA, IGU1, IM, IM100, INA, INI, KE, LVH, LVM, LVM09, LVM090, LVM15,
LVM150, LVM20, LVM200, PVQ, S, S07, S070, S0700, SJ, SQ, SV, SX, SY, SYA, SYJ, SYJA, SZ, V, V060,
V100, V114, V200, V3, V4000, VA, VB, VCHN, VD720, VDW, VEF, VEP, VER, VEX, VF, VFA, VFD, VFE,
VFM, VFN, VFR, V3, V4000, VFS, VFSA, VG, VGA, VH, VHK, VHS, VJ, VJA, VK, VKF, VM, VO, VOA, VP,
VPA, VPG, VPL, VPN, VPS, VPW, VPZA, VQ, VQ7, VQC, VQD, VQJ, VQZ, VR, VS, VS7, VSA, VSH, VSP,
VSR, VSS, VT, VTA, VV061, VV801, VY, VZ, VZA, VZM, VZS, XL, XLA, XLC, XLD, XLF, XLG, XLH, XLS, XM,
XMA, XMC, XMH, XSA, XT, XT311, XT312, XT323, XT34, XT477, XT92, XY, XYA, 113, ASP, VV, VV5, MVV,
SS, 80-VF, 80-VK, 80-VP, 80-VJ, 80-VT, 80-VKF, 80-VM, 80-VZM, 80-VFM, INV, ZP2V, ZM, AS-FG, XMD,
XYC, XYD, XYH, SS, SS3Y, SS3YJ, SS3J, SS5Y, SS5YJ, SS5Z, SS5J, SS5Q, SS5V, VV, VV2Q, VV2QC,
VV2QZ, VV2C, VV3Q, VV3QC, VV3QZ, VV3C, VV3P, VV3K, VV3Z, VV3J, VV4Q, VV4QC, VV4QZ, VV4Z,
VV5Q, VV5QC, VV5QZ, VV5Z, VV5F, VV5FS, VV5FR, VV5K, VV5P, VVT, VV71, VV72, VV307, VV317, VVS,
VBAT, VVQ
10
C-JP.A 43.B.00133
52-IP, 56-IP, IP
C-JP.A 43.B.00134
10-AR, 28, 37, 2801, APV, AR, ARB, ARBF, ARBQ, ARBY, ARBZ, ARBZS, ARD, ARG, ARJ, ARJM, ARM,
ARD, ARG, ARJ, ARP, ARX, INI, SA, SR, SRA, SRF, SRH, SRP, T203, T45, VCHR, VHCR, VY, WR, XT13,
126, AXT, KT-, INA, NAR, XT, IR, IRV, VEX, SY, IRM, IT, EIT, ITV, EITV, IITV, IL100
11
Nuts (stainless steel) with inner screw 12 mm or less: KF, M, BM, SN, SNJ, NT, NTJ
Bolts with screw diameter 12 mm or less: M, BM, AXT, HYC, HYB, HYG, 136313, 136413
Screw for hex-nut wrench, screw diameter 12 mm or less: M, BM
Screw with screw diameter 6 mm or less: M, SV, SX, SY
XT, INA
1301, AC, ACG, AFR, AMP, AMR, ARL, AU, AW, AWD, AWG, AWL, AWM, IW, LLB3, LLB4, LLB5
19
As of November 2013
List of GOST-R Certificates of Conformity
No.
Certification No.
Product series
Valves: Series VXD, VXZ, VXH, VCH40, VXF, VXR, LVM, LVA, VXED
12
C-JP.A 43.B.00135
Valves: Series ADH, DXT, DXT058, FNVB, IDF-BP, LV, LVA, LVC, LVD, LVE, LVH, LVJ, VCA, VCB, LVK,
LVM, LVN, LVP, LVQ, LVW, SCV, LVH, LVJ, SCW, SGC, SGH, VAS, VC, VCA, VCB, XLC, VCC, VCK, VCH,
XLD, VCH400, XLF, VCL, XLG, VCS, XLH, VCW, VCZW, VDW, XLS, VHA, VHB, VHK, VLA, VLSA, VMG, VN,
VNA, VNB, VNC, VND, VNH, VPC, VPF, VPFA, VQ, VTC, VTG, VTS, VTW, VX, VXA, VXD, VXE, VXE2,
VXED2, VXEZ2, VXFA, VXG, VXK, VXP, VXP2, VXR2, VXRA, VXS, VXV, VXG, VXH, VXV3, VXP, VXY, VXR,
VXZ, XLAQ, XLDQ, XLAV, VXV, XLB, XLC 25, XLCV, XLDV, XLFV, XLGV, XLJ, XLK, XLQ, XLV, XPC, XT34,
XVD, XZ, VR, KE, ACTBV, IN, VCW, VHS, SGH, 201, DZ
VCW, VNB, VX, VND, VDW, VV2DW, VV, LVA, VCS, VXA, VXP, VCB, LVH, VC, VXS, VXED
VNH, VNC, SGC
13
C-JP.A 43.B.00136
XGT
14
C-JP.A 43.B.00137
AEP, AP, IL200, INA, XTO, VBAT
15
C-JP.A 43.B.00138
80-AK, AK, AKB, AKH, AKM, AQ, ASP, ASV, INA, KC, KK13, KK130, KK3, KK4S, KK6S, KKA, KKH, KKG, VR,
XTO, KK, KK 130, KT-, VCW, VQ, XT, VCHC, IDF, VR, VQ, 20137, SY
KK, INA, KK130, KKA, SY
16
C-JP.A 43.B.00139
17
C-JP.A 43.B.00140
VBAT, AM
PA, PAP, PAX, PB, PAF, AEP, LSP
ALIP, ALIM
Booster regulator, 15 bar or more, 120 m3/hour or less: Series 56-VBA, VBA, EVBA
18
C-JP.A 43.B.00141
Booster regulator, 15 bar or less, 60 m3/hour or more: Series 56-VBA, VBA, EVBA
Booster regulator, 15 bar or less, 60 m3/hour or less: Series 56-VBA, VBA, EVBA
19
C-US.A 43.B.00142
AP, AZ
20
C-US.A 43.B.00143
AP
21
C-US.A 43.B.00144
AP, SL, AZ, BP, AK, KT
FR
22
C-JP.A 43.B.00145
10-CM, 55-C76, 55-C85, 55-C95, 55-CP95, 55-CQ2, 55-CS1, 55-CXS, 55-MY1, 75A-78A, 7B, ACNL, C55,
C65, C7, C75, C76, C82, C85, C92, C92L, C92LA, C92P, C92PB, C95, C95PE, C96, CA, CA1, CA2, CBA,
CBA1, CBA2, CBG, CBG1, CBJ, CBM2, CBQ, CBQ2, CBX2, CDJPB, CE1, CE2, CEP, CFA, CG, CG1, CG5,
CJ1, CJ2, CJ5, CJP, CJP2, CJPB, CK, CK1, CKG, CKQ, CKQG, CKQP, CKP, CKS, CKZ, CL, CL1, CLA,
CLA2, CLG, CLG1, CLJ, CLJ2, CLK, CLK1, CLK2, CLM, CLM2, CLQ, CLS, CM, CM2, CM2X, CM2Y, CMS,
CNA, CNA2, CNG, CNS, CP, CP95, CP96, CPA, CPA1, CPS, CPS1, CPX2, CQ, CQ2, CQ2A, CQ2X, CQ2X,
CQ2Y, CQ7, CQM, CQP, CQP2, CQS, CQU, CS, CS1, CS2, CU, CUJ, CUK, CUW, CV, CV1, CV3, CVA, CVJ,
CVJ3, CVJ5, CVM, CVP, CVP1, CVQ, CVQM, CVS, CVS1, CVT, CVZ, CX, CX2, CXS, CXSJ, CXSW, CXT,
CXW, CXWM, CY, CY1, CY1B, CY1F, CY1H, CY1L, CY1R, CY1S, CY2, CY2B, CY2H, CY2HT, CY2L, CY2R,
CY2S, CY3, CY3B, CY3R, CYP, CYV, CZ, CZ1, DCU, EQ2, HES, HY, HYB, HYC, HYG, HYQ, MB, MB1, MCN,
MF, MG, MGC, MGF, MGG, MGJ, MGP, MGPA, MGPL, MGPM, MGPS, MGQ, MGQL, MGQM, MGT, MGZ,
MGZR, MK, MK2, MK2T, L, ML1, ML2, MLG, MLGC, MLGP, MLU, MNB, MQM, MQQ, MTS, MU, MVG, MVGQ,
MX, MXF, MXH, MXP, MXQ, MXQR, MXS, MXU, MXW, MXY, MY, MY1, MY1B, MY1C, MY1CW, MY1H,
MY1HT, MY1M, MY2, MY2BH, MY2C, MY2H, MY2HT, MY3, MY3A, MY3B, MYC, MYH, NCA, NCA1, NCG,
NCJ, NCM, NCQ2, NCQ7, NCQ8, NCY, REA, REAH, REAL, REAR, REAS, REB, REBH, REBR, REC, RHC,
RLQ, RQ, RSA, RSG, RSH, RS1H, RSQ, RZQ, XGT, XT316, ZCU, ZCUK, US, MIS, MIW, MFT, CG1W, CA2W,
CKZT, CQ2B, NCJ2, NCJ5, CJ5, 55-CP96, CDU, MQP
23
C-JP.A 43.B.00146
CH, CH2, CH2E, CH2F, CH2G, CH2H, CHA, CHE, CHF, CHG, CHH, CHK, CHKD, CHKDB, CHKG, CHKGB,
CHM, CHN, CHQ, CHQH, CHQW, CHS, CHSG, HC, RB, RBA, RBC, RBL, RBQ, RJ, CHSD
24
C-JP.A 43.B.00147
HAA, HAW, HOW, HOWF
25
C-JP.A 43.B.00148
AT, VBAT, FNR, TC, TC95, TCG1
26
C-JP.A 43.B.00149
HEA, HRG, HRL, HRW, HRZ, HRZD, IDF, IDFA, IDFS, IDK, IDU, HRS, HRGC, INR, INOD, IDH, IDHA
27
C-JP.A 43.B.00150
AF, AFD, AFF, AFL, AFM, AM, AMC, AMD, AME, AMF, AMG, AMH, AMJ, AMV, ID, IDF-FL, IDG, SFA, SFB,
SFC, SFD, ZFA, ZFB, ZFC, INA, XT, ADP, AMP, ZFZ, IDF-KEK, VCHF
28
C-JP.A 43.B.00151
FG, FGA, FGB, FGC, FGD, FGE, FGF, FGG, FGA, FGB, FGC, FGD, FGE, FGF, FGH, FGH, FGJ, FGK,
FGWS, FGZ, FHI, FH, FHM, FHB, FHG, FHI, FN, FHIA, FHM, FH-TK, FHW, FHZ, FN, FN1, FN4, FND, FQ,
FQ1, FZ, WF
55-CRB, 55-CRQ, 56-CRB, 56-CRQ, CC, CCT, CKZT, CR, CRA, CRB, CRB1, CRB2, CRB2BW, CRBU, CRA1,
CRBUW, CRJ, CRQ, CRQ2, CRQ2X, CRS, CRSY, CVRA, DCC, DXT264, MA, MH, MHC, MHC2, MHCA2,
29
C-JP.A 43.B.00152
30
POCC JP.A 43. 00185
MHCM2, MHF, MHF2, MHK, MHK2, MHL, MHL2, MHP, MHQ, MHK, MHQ2, MHL, MHQG2, MHP, MHQ,
MHQJ2, MHR, MHR2, MHR, MHR3, MHRQ, MHS, MHS, MHS2, MHS3, MHS4, MHSH3, MHSHJ3, MHSJ3,
MHT, MHW, MHT2, MHY, MHW, MHZ, MHW2, MHY, MHY2, MHZ2, MHZJ2, MHZL, MI, MSU, MIS, MIW,
MRH, MRHQ, MRQ, MSQ, MSQA, MSQB, MSU, MSUA, MSUB, MSZ, SVCB, WCU, MHZB, MSQX
Electric actuators AC, 750 watt or less: LG, LJ, LTA, LTF, LEF, LEFS, LEJ, LEY
20
GOST-R
As of November 2013
List of GOST-R Certificates of Conformity
No.
Certification No.
Product series
Electric actuators DC, 750 watt or less: E-MY, E-MY2, E-MY2B, E-MY2HT, LA, LB, LX, LXF, LXP, LXS, LEF,
LEY, LEHZ, LEHS, LEHF, LES, LE, LER, LEFS
31
POCC JP.A 43. 00186
32
POCC JP.A 43. 00187
Electric actuators DC, 37.5 watt or less: LZB, LZC, LZ, LE, LER, LEF, LEY, LEHZ, LEHS, LEHF, LES, LDZ,
LZB, LZC, LDZB, LDZC
33
POCC JP.A 43. 00188
Dryer AC/DC, 37.5 watt or more: IDF
34
POCC JP.A 43. 00189
Dryer AC, 750 watt or less: IDF, 812PG
Transformer > 16 kW: IDF-TR
Transformer > 1 kW and < 16 kW: IDF-TR
Transformer < 1 kW: IDF-TR
35
POCC JP.A 43. 00190
Cables: AXT, DXT, ECC-PNAL, EX500, GVV, GVVZ, P39, PCA, PC2W, PCW, PS39, SX100, SY100, TM4DLX, ZS, LC, LC6, LJ, LG, LX, M8, V, V200, SY3000, SJ3000, SJ, D-LC, EX, LE, LEC, CE, IZH, IZN, IZF, IZS,
SY
Cables: ECC-PNAL, UC
36
POCC JP.A 86. 06051
Pressure sensor: 27, CB, IS, ISA, ISC, ISE, ISG, ISL, OPL, PS1000, PS1100, PSE, ZSE, ZSM, ZSP, ZSP1,
ISA2, VR, IDF, IDF, VP, INA
Pressure sensor: GS40, ISE, PPA, ZSE, PSE, ZSE40A, ISE40A, ZSE10, ISE10, ISE30A, ZSE30A
G, GA, GC, GD, GP, GZ, K, KP, IDF-KG
37
POCC JP.A 43.B00653
38
POCC JP.A 43.B00654
39
POCC JP.A 43.B00655
40
POCC JP.A 43.B00652
Connector < 1000 V: EEX, EX, LC8, PCW, VJ, VVQC, SY, ZS, AXT, IDF, A, DIN, K, V, X, Y, GDM, VP, VP7,
LC, DXT, SJ, SS5Q, SX, PCA, VK
Switch > 60 V: IDF
27, CB, IS, ISG, OPL, PS, VR, PSE, ZSE, ZSM, ZSP, ZSP1, IF, IFA, IF3, IFW, IFW5, CB, AG, L1X, GXL, IDF,
C2, D, VR
EX, LC1, LC3, VXFC
CEU, ECC-PNAL, IC, IZE, LC, PF2A, PF2D, PF2W, PFA, PFD, PFM, PFW, PSE, LEC
ISA
41
-JP.AB86.B.06052
42
-JP.AB86.B.06053
43
C-JP.AB86.B.07703
AL, ALB, ALC, ALD, ALDU, ALF, ALI, ALIM, ALIP, ALT, LF, LMD, LMH, LMU, LMV, LN, LS
44
POCC JP.A 32. 01572
Electric actuators: LG, LJ, LTA, LTF, LEF, LEFS, LEJ, LEY
45
C-JP.A 32.B.00650
HRS
46
POCC US.A 93. 03767
Pressure gauge: 00-83
47
C-JP.A 32.B.00705
48
21
-JP.A 73.B.03813
P2240181, LQ3
AS-T-1
HRW
Compressors for refrigerators: IDF-KFH0634-SB, IDF-KFH0739-SD, IDF-KFH1045-SA, IDF-KFH2075-SC, IDFKCAE4440Y-F-SMC, IDF-K80235645, IDF-KZR26K3E-PFJ-522, IDF-KZR40K3E-TFD-522, IDF-KZR54KCETF5-522, IDF-KZR48KCE-TFD-522
Revision history
Edition B ∗ Addition of international standards: ATEX directive, TSSA standards,
China Compulsory Certification system (CCC), GOST-R
∗ Number of pages from 12 to 24.
SP