Mould Heating
Thermocouples
DME Bayonet Thermocouples are made of .9mm stranded
glass-insulated wires. The grounded hot junction is in the
end of a 4.8mm O.D. stainless steel protecting tube for fast
response and long life. Tube features a round tip and is fitted
with a stainless steel spring loaded bayonet fitting. Lead
wires are protected by rugged 4.8mm I.D. flexible armor (lead
wire calibration is ANSI Type J Iron/Constantan). Armor
cable is 119cm long; spade lugs are attached at the end of
the lead wires for easy connection to terminal strip or plug.
DME Adjustable bayonet Type Thermocouples fit hole depths
up to 26cm and will conform to any angle.
DME Spade Type Thermocouples are used between band
heaters and machine nozzles in applications where space will
not permit bayonet type thermocouples. The stainless steel
spade is only .6mm thick and can be easily contoured to fit
various diameters.
Manifold Thermocouples
Installed in manifold to maintain precise temperature control.
Flat Washer Type
Utilized in limited
space applications.
item number
Pin Sensor
TEF68
4mm Ø
Threaded Type
Installed between heat source and
flow channel for more precise control.
ITEM NUMBER
ETC0168
1/32
SI
O
11 N
/1
6
EN
4"
47"
SPADE LUGS
STAINLESS STEEL
FLEXIBLE ARMOR
1-
IM
LD
STAINLESS STEEL
FLEXIBLE ARMOR
1/2
4"
.188 O.D.
STAINLESS STEEL
PROTECTING TUBE
1/2
1-11/16
L DIMENSION
1/2
4-
ETC0252
28UNF
M6
47"
STAINLESS STEEL
FLEXIBLE ARMOR
STAINLESS STEEL
BAYONET FITTING
SPADE LUGS
4"
item number
l
tc-2500
21 /2
tc-3500
31 /2
tc-6000
6"
45° Angle Type
item number
l
tc-2545
21 /2
tc-3545
31 /2
90° Angle Type
item number
l
tc-2590
21 /2
tc-3590
31 /2
tc-6090
6"
.188 O.D.
STAINLESS STEEL
PROTECTING TUBE
Order Desk 1800 224 135 (Free call) n sales@diemouldequipment.com.au
www.diemouldequipment.com.au
Thermocouples
SPADE LUGS
STAINLESS STEEL
BAYONET FITTING
90° BEND
Thread
1/
|
47"
1-11/16
45° BEND
ETC0251
Straight Type
L DIMENSION
STAINLESS
STEEL BAYONET FITTING
.188 O.D.
STAINLESS STEEL
PROTECTING TUBE
ITEM NUMBER
Mould Heating
Surface Pin Type
4mm diameter pin sensor x 12mm long, fastening
suit M4, steel braided sleeving 2m long.
Mould Heating
Thermocouples and Accessories
Hole Depth Chart
l
thermocouple
length
a
hole depth for adapter length
7/
8
1" to
31 /2
2" to 23 /8
11 /2 to 17 /8
6"
41 /2 to 47 /8
4" to 43 /8
1/
1/
2
TAP DRILL AS REQ’D
FOR ADAPTER
.265 O.D. SPRING
13 /8
21 /2
101 /2 adj.
3/16 O.D. TUBING
(.185 TO .191)
13 /
1/
8
2
to 101 /2
2
to 7 /8
9/32 DIA. (.281 DRILL SUGGESTED)
CAP
A
(HOLE DEPTH)
BAYONET
EDGE OF MOLD OR MACHINE
ADAPTER
L
(THERMOCOUPLE LENGTH)
to 10"
Adjustable Thermocouple
By turning the adjustable bayonet
fitting along the spring, the DME
Adjustable Thermocouple can be set
for the desired immersion length, from
1 / " to 101 / ". Spring will conform to
2
2
any angle. Hot junction of ANSI Type
J I/C calibrated leads is inside round
tip. Flexible metal braid is 48" long
with 21 /2" of lead wires at the end and
spade lugs for ease of connection.
BAYONET FITTING
HOT JUNCTION
48"
*PROVIDES FOR HOLE DEPTHS FROM 1/2 TO 10-1/2
item number
Mould Heating
|
Thermocouples and Accessories
tc-8000
Threaded Type Thermocouple
Threaded type thermocouple is
spring loaded and supplied with
cable and mini plug.
item number
tcT-4
48"
Bayonet Adapters
C
The stainless steel bayonet adapters
accommodate the spring loaded bayonet
fitting on the thermocouple, to bottom the
hot junction where temperature sensing
is desired. Adapter requires tapped hole
for mounting.
7/16
B
A
item
number
a
b
BA1007
7/
.465
1/
npt
ba1013
13 /8
.934
1/
npt
ba4007
7/
ba4013
13 /
8
8
8
c
8-27
8-27
.465
3 / -24
8
nf
.934
3 / -24
8
nf
Spade Type Thermocouple
Used between band heaters and machine nozzles
in applications where space will not permit
bayonet type thermocouples. Stainless steel
spade measures 1” x 11/4 x .025 thick and can be
easily contoured to fit various
item
diameters. Thermocouple is Type
number
J I/C. Flexible stainless steel armor
cable is 48” long with 4” of lead
tc-9000
wires at the end.
1-1/4"
48"
4"
1"
Plug (with Cable Clamp)
Jack (with Cable Clamp)
Mini Plug
ROUND PINS
AND
SOCKETS
(3/16 & 1/8)
Mini Jack
FLAT PINS
AND
SOCKETS
item number
item number
item number
item number
PL-10
PL-20
m2mj
m2f-j
Order Desk 1800 224 135 (Free call) n sales@diemouldequipment.com.au
www.diemouldequipment.com.au