Set-Top Codec Mounting Kit

advertisement
Set-Top Codec Mounting Kit
Camera Accessories
Packing list
Be sure you received the following items:
Set-Top Shelf
Tube-Base
Bottom
Telescopic Tube
Tube-Base
Top
14-20 Allen Wrench
Tube-Shelf
Bottom
10-24 x 1-1/2 Socket Head 10-24 Hexnut
Cap Screw
Qty: 3
Qty: 3
Tube-Shelf
Top
1/4-20 x 5/8 Cap Screw
Qty: 2
Instructions
Figure 1.0 Unpacking
If you are missing any items, please contact the ClearOne Technical Services Group 1-800-283-5936
(USA) or 1-801-974-3760
To assemble the Set-Top Shelf kit
1. Insert two Cap Screws into the
positioning holes on the Tube-Shelf
Top.
Cap Screw
2. Sandwich Set-Top Shelf between
Tube-Shelf Top and Tube-Shelf Bottom
making sure the Cap Screws pass
through the positioning holes on the
Tube-Shelf Bottom.
Tube-Shelf Top
Set-Top Shelf
3. Tighten Cap Screws using the Allen
Wrench.
Tube-Shelf Bottom
Figure 2.0 Tube-Shelf assembly
INSTRUCTION SHEET
INSTRUCTION SHEET
4. Place Tube-Base Top over the
2" hole in the top of the cart
and insert three Socket Head
Cap Screws into the positioning
holes.
Socket Head
Cap Screws
Top of Cart
Tube-Base Top
5. Place Tube-Base Bottom under
2" hole in the top of the cart
making sure the Socket Head
Cap Screws pass through the
positioning holes.
2" Hole in Cart
Tube-Base Bottom
Hexnuts
Note: Carts come with 2" precut
hole in top.
Figure 3.0 Tube-Base assembly
6. Use the Allen Wrench to tighten Hexnuts onto the Socket Head Screws.
7. Insert Telescopic Tube into Tube-Base.
8. Insert Telescopic Tube into the Tube-Shelf.
Note: Adjust Telescopic Tube height by turning the
knob on the tube, raising or lowering tube to
desired height and then tightening knob to secure
height. Telescopic Tube can be adjusted to a height
of approximately 45".
Telescopic Tube
Note: When placing a set-top codec on the Set-Top
Shelf, be sure to use the mounting equipment that
comes with the codec.
Figure 4.0 Complete assembly
ClearOne Communications ~ 1-763-486-1765 ~ www.clearone.com
© 2004 ClearOne Communications, Inc. All rights reserved.
Information in this document subject to change without notice. 800-171-302 Rev 1.0
Download