C1 Surgical Kit Content:
11
CT-BTC40
MT-SMD10
Spade marking drill
Marking drill 1.90mm
external irrigation
23
15
Pilot drill with built in stopper
Ø2.4/2.0 height 8mm
27
22
21
15
CT-TDC40
5
Pilot drill with built in stopper
Ø2.4/2.0 height 11.5mm
9
29
Pilot drill with built in stopper
Ø2.4/2.0 height 13mm
8
CT-TDC45
Pilot drill Ø2.4/2.0 height 16mm
CT-NSR10
19
CT-NLR10
17
18
Body try in 2.40mm for tapered
impl. procedure
9
1
CT-BTC30
2
35
36
10
Countersink for narrow
platform implant system
Body try in 3.50mm for tapered
impl. procedure
The tools shown are in proportion to one another.
30
MT-GDN33
20
Countersink for standard
platform implant system
CT-NLI10
Coni. con. long insertion tool, NP
Key to code used:
Batch Code
Catalog Number
Manufacturer
Non sterile
31
21
CT-BTC35
Torque wrench for implant placement
MT-CSN33
CT-NSI10
Body try in 3mm for tapered impl.
procedure
MT-RT070
29
19
Coni. con. short insertion tool, NP
37
7
3
Coni. con. long insertion tool, WP
18
Long ratchet insertion tool, coni. con., NP
CT-BTC24
6
Drill extender
38
28
CT-WLI10
8
4
MT-DE001
CT-WSI10
17
38
5
37
27
Short ratchet insertion tool, coni. con., NP
CT-P2416
31
Short hex. drive 0.05 inch
Long ratchet insertion tool, coni. con., WP
Coni. con. short insertion tool, WP
7
30
MT-RDS30
CT-WLR10
Step drill Ø4.5/4mm, external irrigation
CT-P2413
20
Long hex. drive 0.05 inch
36
26
16
6
13
33
MT-RDL30
CT-WSR10
Short ratchet insertion tool, coni. con., WP
Step drill Ø4/3.5mm, external irrigation
CT-P2411
12
32
35
25
Step drill Ø3.5/3mm, external irrigation
Pilot drill with built in stopper
Ø2.4/2.0 height 10mm
16
28
34
Int. connection abutment extractor
CT-P2410
11
10
MT-RE172
®
CT-TDC35
4
14
34
Coni. con. long insertion tool, SP
Step drill Ø3/2.4mm, external irrigation
14
Int. connection abutment extractor, NP
CT-SLI10
CT-TDC30
CT-P2408
25
24
24
13
3
26
MT-RE160
Coni. con. short insertion tool, SP
Body try in 4.5mm for tapered
impl. procedure
MT-TDN19
33
CT-SSI10
CT-BTC45
2
Parallel pin Ø2.40/3mm for
tapered impl. procedure
Long ratchet insertion tool, coni. con., SP
23
12
MT-PP240
CT-SLR10
Body try in 4mm for tapered
impl. procedure
1
32
22
CT-SSR10
Short ratchet insertion tool, coni. con., SP
MT-GDN50
Countersink for wide platform
implant system
After mechanical or manual cleaning, all surgical instruments
must be sterilized in an autoclave at 134°C (273°F),
pressure of~315 Kpa for 6 minutes. Do not exceed
134°C. Never use dry sterilizers.
Conical Connection
Surgical Kit
C1 Surgical Kit Content:
11
CT-BTC40
MT-SMD10
Spade marking drill
Marking drill 1.90mm
external irrigation
23
15
Pilot drill with built in stopper
Ø2.4/2.0 height 8mm
27
22
21
15
CT-TDC40
5
Pilot drill with built in stopper
Ø2.4/2.0 height 11.5mm
9
29
Pilot drill with built in stopper
Ø2.4/2.0 height 13mm
8
CT-TDC45
Pilot drill Ø2.4/2.0 height 16mm
CT-NSR10
19
CT-NLR10
17
18
Body try in 2.40mm for tapered
impl. procedure
9
1
CT-BTC30
2
35
36
10
Countersink for narrow
platform implant system
Body try in 3.50mm for tapered
impl. procedure
The tools shown are in proportion to one another.
30
MT-GDN33
20
Countersink for standard
platform implant system
CT-NLI10
Coni. con. long insertion tool, NP
Key to code used:
Batch Code
Catalog Number
Manufacturer
Non sterile
31
21
CT-BTC35
Torque wrench for implant placement
MT-CSN33
CT-NSI10
Body try in 3mm for tapered impl.
procedure
MT-RT070
29
19
Coni. con. short insertion tool, NP
37
7
3
Coni. con. long insertion tool, WP
18
Long ratchet insertion tool, coni. con., NP
CT-BTC24
6
Drill extender
38
28
CT-WLI10
8
4
MT-DE001
CT-WSI10
17
38
5
37
27
Short ratchet insertion tool, coni. con., NP
CT-P2416
31
Short hex. drive 0.05 inch
Long ratchet insertion tool, coni. con., WP
Coni. con. short insertion tool, WP
7
30
MT-RDS30
CT-WLR10
Step drill Ø4.5/4mm, external irrigation
CT-P2413
20
Long hex. drive 0.05 inch
36
26
16
6
13
33
MT-RDL30
CT-WSR10
Short ratchet insertion tool, coni. con., WP
Step drill Ø4/3.5mm, external irrigation
CT-P2411
12
32
35
25
Step drill Ø3.5/3mm, external irrigation
Pilot drill with built in stopper
Ø2.4/2.0 height 10mm
16
28
34
Int. connection abutment extractor
CT-P2410
11
10
MT-RE172
®
CT-TDC35
4
14
34
Coni. con. long insertion tool, SP
Step drill Ø3/2.4mm, external irrigation
14
Int. connection abutment extractor, NP
CT-SLI10
CT-TDC30
CT-P2408
25
24
24
13
3
26
MT-RE160
Coni. con. short insertion tool, SP
Body try in 4.5mm for tapered
impl. procedure
MT-TDN19
33
CT-SSI10
CT-BTC45
2
Parallel pin Ø2.40/3mm for
tapered impl. procedure
Long ratchet insertion tool, coni. con., SP
23
12
MT-PP240
CT-SLR10
Body try in 4mm for tapered
impl. procedure
1
32
22
CT-SSR10
Short ratchet insertion tool, coni. con., SP
MT-GDN50
Countersink for wide platform
implant system
After mechanical or manual cleaning, all surgical instruments
must be sterilized in an autoclave at 134°C (273°F),
pressure of~315 Kpa for 6 minutes. Do not exceed
134°C. Never use dry sterilizers.
Conical Connection
Surgical Kit
C1 Surgical Kit Content:
11
CT-BTC40
MT-SMD10
Spade marking drill
Marking drill 1.90mm
external irrigation
23
15
Pilot drill with built in stopper
Ø2.4/2.0 height 8mm
27
22
21
15
CT-TDC40
5
Pilot drill with built in stopper
Ø2.4/2.0 height 11.5mm
9
29
Pilot drill with built in stopper
Ø2.4/2.0 height 13mm
8
CT-TDC45
Pilot drill Ø2.4/2.0 height 16mm
CT-NSR10
19
CT-NLR10
17
18
Body try in 2.40mm for tapered
impl. procedure
9
1
CT-BTC30
2
35
36
10
Countersink for narrow
platform implant system
Body try in 3.50mm for tapered
impl. procedure
The tools shown are in proportion to one another.
30
MT-GDN33
20
Countersink for standard
platform implant system
CT-NLI10
Coni. con. long insertion tool, NP
Key to code used:
Batch Code
Catalog Number
Manufacturer
Non sterile
31
21
CT-BTC35
Torque wrench for implant placement
MT-CSN33
CT-NSI10
Body try in 3mm for tapered impl.
procedure
MT-RT070
29
19
Coni. con. short insertion tool, NP
37
7
3
Coni. con. long insertion tool, WP
18
Long ratchet insertion tool, coni. con., NP
CT-BTC24
6
Drill extender
38
28
CT-WLI10
8
4
MT-DE001
CT-WSI10
17
38
5
37
27
Short ratchet insertion tool, coni. con., NP
CT-P2416
31
Short hex. drive 0.05 inch
Long ratchet insertion tool, coni. con., WP
Coni. con. short insertion tool, WP
7
30
MT-RDS30
CT-WLR10
Step drill Ø4.5/4mm, external irrigation
CT-P2413
20
Long hex. drive 0.05 inch
36
26
16
6
13
33
MT-RDL30
CT-WSR10
Short ratchet insertion tool, coni. con., WP
Step drill Ø4/3.5mm, external irrigation
CT-P2411
12
32
35
25
Step drill Ø3.5/3mm, external irrigation
Pilot drill with built in stopper
Ø2.4/2.0 height 10mm
16
28
34
Int. connection abutment extractor
CT-P2410
11
10
MT-RE172
®
CT-TDC35
4
14
34
Coni. con. long insertion tool, SP
Step drill Ø3/2.4mm, external irrigation
14
Int. connection abutment extractor, NP
CT-SLI10
CT-TDC30
CT-P2408
25
24
24
13
3
26
MT-RE160
Coni. con. short insertion tool, SP
Body try in 4.5mm for tapered
impl. procedure
MT-TDN19
33
CT-SSI10
CT-BTC45
2
Parallel pin Ø2.40/3mm for
tapered impl. procedure
Long ratchet insertion tool, coni. con., SP
23
12
MT-PP240
CT-SLR10
Body try in 4mm for tapered
impl. procedure
1
32
22
CT-SSR10
Short ratchet insertion tool, coni. con., SP
MT-GDN50
Countersink for wide platform
implant system
After mechanical or manual cleaning, all surgical instruments
must be sterilized in an autoclave at 134°C (273°F),
pressure of~315 Kpa for 6 minutes. Do not exceed
134°C. Never use dry sterilizers.
Conical Connection
Surgical Kit
MP-WCC1S Rev.2 Aug. 2015
Drilling Speed (RPM)
Diameter
12001500
Ø1.90
200500
9001200
Ø2.4
Ø2.40
Ø2.40
Ø3.20
15-25
Drilling Speed (RPM)
12001500
9001200
Ø3.30
Diameter
Ø1.90
Ø2.40
Ø2.40
500700
400700
Ø3
Ø3.50
200400
Ø3.50
Ø3.50
Ø4
15-25
Ø4.20
Final drill
For bone
type 1,2&3
Final drill
For bone
type 1,2&3
Ø 3.30mm
Ø 4.20mm
Do not use final drill for bone type 4.
Do not use final drill for bone type 4.
The drilling sequence is demonstrated by the use
of 13mm implants.
The drilling sequence is demonstrated by the use
of 13mm implants.
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
MIS’ Quality System complies with international
quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices,
ISO 9001: 2008 – Quality Management
System and CE Directive for
Medical Devices 93/42/
EEC. MIS’ products are
cleared for marketing
in the USA and CE
approved.
®
MIS Implants Technologies Ltd.
www.mis-implants.com
Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
200400
500700
Ø2.40
Ø3
Ø3
Ø3
Ø3.60
15-25
Ø3.75
Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
Ø 5mm
Do not use final drill for bone type 4.
Do not use final drill for bone type 4.
The drilling sequence is demonstrated by the use
of 13mm implants.
The drilling sequence is demonstrated by the use
of 13mm implants.
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
400700
400600
Ø3
Ø3.50
Ø4
200400
Ø4
Ø4.10
Ø 4.90
Final drill
For bone
type 1,2&3
Final drill
For bone
type 1,2&3
Ø 3.75mm
Ø2.40
500700
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
15-25
Ø5
MIS Implants Technologies Ltd.
P.O.Box 7, Bar Lev Industrial Park,
2015600, ISRAEL
Website: www.mis-implants.com
EC
0483
refers to
drills only
REP
MIS Implants Technologies GmbH
Simeonscarre 2, 32423 Minden,
Germany
Tel: +49 571-972-7620
Email: service@mis-implants.de
MP-WCC1S Rev.2 Aug. 2015
Drilling Speed (RPM)
Diameter
12001500
Ø1.90
200500
9001200
Ø2.4
Ø2.40
Ø2.40
Ø3.20
15-25
Drilling Speed (RPM)
12001500
9001200
Ø3.30
Diameter
Ø1.90
Ø2.40
Ø2.40
500700
400700
Ø3
Ø3.50
200400
Ø3.50
Ø3.50
Ø4
15-25
Ø4.20
Final drill
For bone
type 1,2&3
Final drill
For bone
type 1,2&3
Ø 3.30mm
Ø 4.20mm
Do not use final drill for bone type 4.
Do not use final drill for bone type 4.
The drilling sequence is demonstrated by the use
of 13mm implants.
The drilling sequence is demonstrated by the use
of 13mm implants.
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
MIS’ Quality System complies with international
quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices,
ISO 9001: 2008 – Quality Management
System and CE Directive for
Medical Devices 93/42/
EEC. MIS’ products are
cleared for marketing
in the USA and CE
approved.
®
MIS Implants Technologies Ltd.
www.mis-implants.com
Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
200400
500700
Ø2.40
Ø3
Ø3
Ø3
Ø3.60
15-25
Ø3.75
Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
Ø 5mm
Do not use final drill for bone type 4.
Do not use final drill for bone type 4.
The drilling sequence is demonstrated by the use
of 13mm implants.
The drilling sequence is demonstrated by the use
of 13mm implants.
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
400700
400600
Ø3
Ø3.50
Ø4
200400
Ø4
Ø4.10
Ø 4.90
Final drill
For bone
type 1,2&3
Final drill
For bone
type 1,2&3
Ø 3.75mm
Ø2.40
500700
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
15-25
Ø5
MIS Implants Technologies Ltd.
P.O.Box 7, Bar Lev Industrial Park,
2015600, ISRAEL
Website: www.mis-implants.com
EC
0483
refers to
drills only
REP
MIS Implants Technologies GmbH
Simeonscarre 2, 32423 Minden,
Germany
Tel: +49 571-972-7620
Email: service@mis-implants.de
MP-WCC1S Rev.2 Aug. 2015
Drilling Speed (RPM)
Diameter
12001500
Ø1.90
200500
9001200
Ø2.4
Ø2.40
Ø2.40
Ø3.20
15-25
Drilling Speed (RPM)
12001500
9001200
Ø3.30
Diameter
Ø1.90
Ø2.40
Ø2.40
500700
400700
Ø3
Ø3.50
200400
Ø3.50
Ø3.50
Ø4
15-25
Ø4.20
Final drill
For bone
type 1,2&3
Final drill
For bone
type 1,2&3
Ø 3.30mm
Ø 4.20mm
Do not use final drill for bone type 4.
Do not use final drill for bone type 4.
The drilling sequence is demonstrated by the use
of 13mm implants.
The drilling sequence is demonstrated by the use
of 13mm implants.
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
MIS’ Quality System complies with international
quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices,
ISO 9001: 2008 – Quality Management
System and CE Directive for
Medical Devices 93/42/
EEC. MIS’ products are
cleared for marketing
in the USA and CE
approved.
®
MIS Implants Technologies Ltd.
www.mis-implants.com
Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
200400
500700
Ø2.40
Ø3
Ø3
Ø3
Ø3.60
15-25
Ø3.75
Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
Ø 5mm
Do not use final drill for bone type 4.
Do not use final drill for bone type 4.
The drilling sequence is demonstrated by the use
of 13mm implants.
The drilling sequence is demonstrated by the use
of 13mm implants.
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
400700
400600
Ø3
Ø3.50
Ø4
200400
Ø4
Ø4.10
Ø 4.90
Final drill
For bone
type 1,2&3
Final drill
For bone
type 1,2&3
Ø 3.75mm
Ø2.40
500700
Procedure recommended by MIS cannot replace the
judgment and professional experience of the surgeon.
15-25
Ø5
MIS Implants Technologies Ltd.
P.O.Box 7, Bar Lev Industrial Park,
2015600, ISRAEL
Website: www.mis-implants.com
EC
0483
refers to
drills only
REP
MIS Implants Technologies GmbH
Simeonscarre 2, 32423 Minden,
Germany
Tel: +49 571-972-7620
Email: service@mis-implants.de