© Siemens AG 2015
SIMOTICS Low-Voltage Motors
Type series 1LA, 1LE, 1LG, 1LL, 1LP, 1MA, 1MB, 1PC, 1PP, 1PQ
Frame sizes 63 to 450
Power range 0.09 to 1250 kW
Motors
Price List
D 81.1 P
Edition
03/2015
Answers for industry.
© Siemens AG 2015
■ Statutory minimum efficiencies in the European
■ Note
economic area
Please note that the minimum efficiency IE2 will be required by
law from June 16, 2011 for many low-voltage motors that are sold/
installed in the European economic area. In order to avoid additional
costs for changing from IE1 to IE2 in 2011, we as a manufacturer
recommend using the newly ordered products only for IE2. The
statutory EU REGULATION (EC) No. 640/2009 (of July 22, 2009)
governs the minimum efficiencies for electrical drives in the European
economic area. It is based on the directive 2005/32/EC of the
European Parliament and of the Council of July 6, 2005.
All mentioned efficiency classes refer to 50 Hz data (if not
otherwise specified).
When operating the motors on the converter, additional losses
occur which may require a torque reduction depending on the
permissible excessive winding temperature.
The permissible torques can be taken from the SIZER configuration
tool. The lowest frequency provided there is 5 Hz. In case of stationary converter operation at lower frequencies, in particular with
frame sizes < 100, a request to the Quotation Center is required.
■ Energy saving/Energy-saving program SinaSave
Further information regarding energy savings and the Energysaving
program SinaSave can be found at the following internet address:
www.siemens.com/energysaving
■ Selection tool DT Configurator
The DT Configurator covers
the product range of
low-voltage motors and
MICROMASTER 4/SINAMICS
inverters and converters as
well as frequency converters
for SIMATIC ET 200 distributed
I/O. The range of available
products is being continuously
expanded.
The following information is provided for the individual products:
• 2D/3D-model generator for motors and converters
• Data sheet generator
• Start-up calculation for motors
• Comprehensive product-specific documentation
Online access in the Siemens Industry Mall
The DT Configurator is integrated in the Siemens Industry Mall
and can be used on the Internet without installation.
English: www.siemens.com/dt-configurator
Offline access in the Interactive Catalog CA 01
The DT Configurator is also integrated on the DVD of the Interactive Catalog CA 01, the offline version of the Siemens Industry
Mall. You can order the CA 01 with your respective Siemens
sales person or in the Internet:
www.siemens.com/automation/ca01
■ Price Groups
Motors
Type
Preferred and Express Motors
1LA7, 1LE1
Price group
3Z0
Standard program according to catalog with standard delivery time
1LA5, 1LA6, 1LA7, 1LA9,
1MA7, 1MA6
1LA8, 1PQ8,
1LE1, 1LG4, 1LG6, 1LP4,
1LL8
1LP5, 1LP7, 1MB1, 1PC1,
1PP4, 1PP5, 1PP7
3Z1
3Z4
3ZT
■ Surcharges for Freight and Packaging
Quote in %
7.5
5
3
■ Definition of Delivery Time
Currently in
stock and
available for
Standard delivery times in working days:
delivery:
10
15
20
30
3Z6
The prices provided in this price list are valid for copper quotations
(German electrolytic copper quotations) up to 225.– per 100 kg.
The surcharges stated below are added to the respective net price
for quotations above 225.–. The copper surcharge is based on the
quotation (lower German electrolytic quotation +1 %) of the
previous day of the order placed.
The copper surcharges for quotations of EUR 925.– and higher per
100 kg are additionally increased in steps of EUR 50.– by 1 %. For
further information about "Metal surcharges", see the Appendix.
Copper quotation
The total delivery time (motor + supplements) is determined by the
longer delivery time of the associated components.
Delivery times apply to clarified orders from the supplying factory –
especially for larger order quantities or with customer-specific
documentations.
Express
1XP8, 2CW2
■ CU surcharge
Additional surcharges for freight and packaging will be calculated
in addition to orders.
Order Value in EUR
up to 500.–
up to 2500.–
above 2500.–
Accessories/
Spare parts
40
On
request
■ Changes or Cancellation
Costs will be charged according to expenses occurred through
changes or cancellation.
■ Additional documentation
You will find all information material, such as brochures, catalogs,
manuals and operating instructions for standard drive systems
up-to-date on the Internet at the address:
www.siemens.com/motors/printmaterial
You can order the listed documentation or download it in common
file formats (PDF, ZIP).
EUR per 100 kg
225.– up to just below 275.–
275.– up to just below 325.–
325.– up to just below 375.–
375.– up to just below 425.–
425.– up to just below 475.–
475.– up to just below 525.–
525.– up to just below 575.–
575.– up to just below 625.–
625.– up to just below 675.–
675.– up to just below 725.–
725.– up to just below 775.–
775.– up to just below 825.–
825.– up to just below 875.–
875.– up to just below 925.–
Cu surcharge acc. to metal factor
N-W----(for Motors 1LA, 1LG, 1LE1, 1PC1,
1PP, 1LP, 1MA, 1MB, 1PQ, 1LL)
%
1.2
2.5
3.5
4.5
5.5
6.5
7.5
8.5
9.5
10.5
11.5
12.5
13.5
14.5
© Siemens AG 2015
Motors
SIMOTICS
Low-Voltage Motors
Frame sizes 63 to 450
Power range 0.09 to 1250 kW
Preferred and Express motors
Motors with Premium Efficiency IE3
Motors with High Efficiency IE2
Motors with Standard Efficiency
1
SIMOTICS GP/SD 1LE1/1PC1/1LA/
1LG/1LP/1PP Standard Motors
Motors with High Efficiency IE2
Motors with Premium Efficiency IE3
Motors with Standard Efficiency IE1
Motors NEMA Energy Efficient and
Premium Efficient
Pole-changing motors
Motors for converter-fed operation only
2
SIMOTICS N-compact
Non-Standard Motors
Motors specially designed for
mains-fed operation
Motors specially designed for
converter-fed operation
3
SIMOTICS XP
Explosion-Proof Motors
Loher motors
Motors for Zone 1 in
type of protection Ex e and Ex de
Motors for Zone 2 or 21/22 in
type of protection Ex n, Ex t, Ex tb, EX tc
4
SIMOTICS DP
Application-specific Motors
Smoke-extraction motors
Marine motors
5
Appendix
Industry Services
Contact partner
Online services
Metal surcharges
Conditions of sale and delivery
Export regulations
6
Price List D 81.1 P · 03/2015
The products and systems described in this
Price List are manufactured/distributed under
application of a certified
quality management
system in accordance
with DIN EN ISO 9001
(Certified Registration
No. DE-000357 QM).
The certificate is recognized by all IQNet countries.
The prices are valid from 01.02.2015
Supersedes:
Price List D 81.1 · October 2014
Refer to the Industry Mall for current updates
of this Price List
www.siemens.com/industrymall
The products contained in this Price List can
also be found in the Interactive Catalog CA 01.
Article No.:
E86060-D4001-A510-D4-7600
Please contact your local Siemens branch
© Siemens AG 2015
© Siemens AG 2015
2
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Answers for industry.
Integrated technologies, vertical market expertise and services
for greater productivity, energy efficiency, and flexibility.
The Siemens Industry Sector is the
world's leading supplier of innovative
and environmentally friendly products
and solutions for industrial companies.
End-to-end automation technology and
industrial software, solid market expertise, and technology-based services are
the levers we use to increase our customers’ productivity, efficiency and
flexibility. With a global workforce of
more than 100 000 employees,
the Industry Sector comprises the
Industry Automation, Drive Technologies, and Customer Services divisions,
as well as the Metals Technologies
Business Unit.
We consistently rely on integrated technologies and, thanks to our bundled
portfolio, we can respond more quickly
and flexibly to our customers' wishes.
With our globally unmatched range of
automation technology, industrial
control and drive technology as well
as industrial software, we equip companies with exactly what they need over
their entire value chain – from product
design and development to production,
sales and service. Our industrial customers benefit from our comprehensive
portfolio, which is tailored to their
market and their needs.
Market launch times can be reduced
by up to 50 % due to the combination
of powerful automation technology
and industrial software from Siemens
Industry. At the same time, the costs for
energy or waste water for a manufacturing company can be reduced significantly. In this way, we increase our
customers’ competitive strength and
make an important contribution to environmental protection with our energyefficient products and solutions.
Siemens D 81.1 P · 03/2015
3
© Siemens AG 2015
(53 ²(QWHUSULVH5HVRXUFH3ODQQLQJ
3/0 ²3URGXFW/LIHF\FOH0DQDJHPHQW
0DQDJHPHQW
/HYHO
‡3URGXFW'HVLJQ
‡3URGXFWLRQ3ODQQLQJDQG6LPXODWLRQ
‡'DWD0DQDJHPHQW
3ODQW(QJLQHHULQJ
0(6²0DQXIDFWXULQJ([HFXWLRQ6\VWHPV
6,0$7,&,7
&2026
(WKHUQHW
2SHUDWLRQV
/HYHO
6,0$7,&3&6
2SHUDWRU6\VWHP
0DLQWHQDQFH
$VVHW0DQDJHPHQW
(QJLQHHULQJ
6WDWLRQ
(QHUJ\
0DQDJHPHQW
6,0$7,&:LQ&&
6&$'$6\VWHP
,QGXVWULDO(WKHUQHW
7,$3RUWDO
&RQWURO/HYHO
6,0$7,&3&6
$XWRPDWLRQ
6\VWHP
6,180(5,.
&RPSXWHU1XPHULF&RQWURO
6,027,21
0RWLRQ&RQWURO
6,0$7,&1(7
,QGXVWULDO
&RPPXQLFDWLRQ
6,0$7,&&RQWUROOHU
0RGXODU3&%DVHG
6,0$7,&+0,
+XPDQ0DFKLQH,QWHUIDFH
6,0$7,&'LVWULEXWHG,2
6,1$0,&6'ULYH6\VWHPV
6,5,86,QGXVWULDO&RQWUROV
)LHOG/HYHO
352),%863$
3URFHVV,QVWUXPHQWDWLRQ
7RWDOO\
,QWHJUDWHG
$XWRPDWLRQ
6,0$7,&,GHQW
,QGXVWULDO,GHQWLILFDWLRQ
+$57
/RZ9ROWDJH'LVWULEXWLRQ
,2/LQN
6,027,&60RWRUV
Efficient automation starts with
efficient engineering.
Totally Integrated Automation: Efficiency driving productivity.
Efficient engineering is the first step toward better production that is faster,
more flexible, and more intelligent. With all components interacting efficiently,
Totally Integrated Automation (TIA) delivers enormous time savings right from
the engineering phase. The result is lower costs, faster time-to-market, and
greater flexibility.
4
Siemens D 81.1 P · 03/2015
6,7233RZHU6XSSO\
© Siemens AG 2015
A unique complete approach for all industries
Totally Integrated Automation
Efficient interoperability of all automation components
As one of the world's leading automation suppliers,
Siemens provides an integrated, comprehensive portfolio
for all requirements in process and manufacturing industries.
All components are mutually compatible and system-tested.
This ensures that they reliably perform their tasks in industrial
use and interact efficiently, and that each automation solution can be implemented with little time and effort based
on standard products. The integration of many separate individual engineering tasks into a single engineering environment, for example, provides enormous time and cost savings.
With its comprehensive technology and industry-specific
expertise, Siemens is continuously driving progress in manufacturing industries – and Totally Integrated Automation plays
a key role.
Totally Integrated Automation creates real value added in
all automation tasks, especially for:
352),1(7
,QGXVWULDO(WKHUQHW
352),%86
$6,QWHUIDFH
.1;*$00$LQVWDEXV
7RWDOO\
,QWHJUDWHG
3RZHU
• Integrated engineering
Consistent, comprehensive engineering throughout the
entire product development and production process
• Industrial data management
Access to all important data occurring in productive
operation – along the entire value chain and across
all levels
• Industrial communication
Integrated communication based on international
cross-vendor standards that are mutually compatible
• Industrial security
Systematic minimization of the risk of an internal or
external attack on plants and networks
• Safety Integrated
Reliable protection of personnel, machinery, and the
environment thanks to seamless integration of safety
technologies into the standard automation
Making things right with Totally Integrated Automation
Totally Integrated Automation, industrial automation from
Siemens, stands for the efficient interoperability of all automation components. The open system architecture covers
the entire production process and is based on end-to-end
shared characteristics: consistent data management, global
standards, and uniform hardware and software interfaces.
Totally Integrated Automation lays the foundation for
comprehensive optimization of the production process:
• Time and cost savings due to efficient engineering
• Minimized downtime due to integrated diagnostic
functions
• Simplified implementation of automation solutions due
to global standards
• Better performance due to interoperability of systemtested components
Siemens D 81.1 P · 03/2015
5
© Siemens AG 2015
Totally Integrated Power
We bring power to the point –
safely and reliably.
Efficient, reliable, safe: These are the demands placed on electrification and especially
power distribution. And our answer – for all application areas of the energy system –
is Totally Integrated Power (TIP). It’s based on our comprehensive range of products,
systems, and solutions for low and medium voltage, rounded out by our support
throughout the entire lifecycle – from planning with our own software tools to installation,
operation, and services.
Comprehensive answers for
power distribution in complex
energy systems – from Siemens
Smart interfaces allow linking to industrial or building automation, making it possible to fully
exploit all the optimization potential of an integrated solution. This is how we provide our
customers around the world with answers to their challenges. With highly efficient, reliable,
and safe power distribution, we lay the foundation for sustainable infrastructure and cities,
buildings, and industrial plants. We bring power to the point – wherever and whenever it is
needed.
More information: www.siemens.com/tip
6
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Totally Integrated Power offers more:
• Consistency:
For simplified plant engineering and commissioning as well as smooth integration into automation solutions
for building or production processes
• One-stop-shop:
A reliable partner with a complete portfolio for the entire process and lifecycle – from the initial idea
to after-sales service
• Safety:
A comprehensive range of protection components for personnel safety and line and fire protection,
safety by means of type testing
• Reliability:
A reliable partner who works with customers to develop long-lasting solutions that meet the highest
quality standards
• Efficiency:
Bringing power to the point means greater plant availability and maximum energy efficiency in
power distribution
• Flexibility:
End-to-end consistency and modular design of Totally Integrated Power for any desired expansions and
adaptation to future requirements
• Advanced technology:
Reliable power distribution especially for applications in which supply is critical, continuous refinement of
the technology
Challenges are our speciality
Automation
Operation
&
Monitoring
Process/
Industrial
automation
Load
management
PROFINET
Load
curves
Forecast
Maintenance
PROFIBUS
Status
reporting/
failure management
...
Protocols
Power
Quality
Cost
center
Building
automation
Industrial Ethernet
Modbus
Electrification
Renewables
Medium-voltage switchgear
Storage
technologies and protection technology
Transformer
Low-voltage switchboard
with protection and measuring
technology
Low-voltage
distribution
≤ 110 kV
Products, systems and solutions
Consulting,
planning
Engineering
Order,
delivery
Installation,
commissioning
Operation
Service,
modernization
Siemens D 81.1 P · 03/2015
7
© Siemens AG 2015
8
Siemens D 81.1 P · 03/2015
1
© Siemens AG 2015
Preferred and
Express motors
1/2
1/2
Motors with Premium Efficiency IE3
SIMOTICS GP –
Aluminum series 1LE1003
SIMOTICS SD –
Cast-iron series 1LE1503
1/8
1/8
Motors with High Efficiency IE2
SIMOTICS GP –
Aluminum series 1LE1001
SIMOTICS SD –
Cast-iron series 1LE1501
1/14
1/14
Motors with Standard Efficiency
SIMOTICS GP –
Aluminum series 1LA7
SIMOTICS GP –
Aluminum series 1LA7 and 1LE1
Pole-changing versions
1/15
Definition for "Preferred motors"
The most popular basic versions of motor series 1LA7, 1LE1001, 1LE1501,
1LE1003 and 1LE1503 are available under special terms as Preferred motors.
• This concerns a defined selection from the complete spectrum of motors
• The delivery times are in accordance with the details in the Catalog
• The motors are in price group 3Z0
Definition for "Express motors"
Most of the Preferred motors are also available with a shorter delivery time as
Express motors.
• This comprises a subset of the Preferred motors and they are ordered using the
order code B19
• The standard delivery time for Express motors is 1 to 2 days from the time of
clarification of the order at the factory until dispatch from the factory. To
determine the time of arrival at the customer site, the appropriate shipping
time must be added.
• An express surcharge will be applied for this faster delivery
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Preferred and Express motors
Motors with Premium Efficiency IE3
1
Standard delivery times in working days:
SIMOTICS GP – Aluminum series 1LE1003
SIMOTICS SD – Cast-iron series 1LE1503
Express
10
20
■ Selection and ordering data
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: Premium Efficiency IE3
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
50 Hz, 400 VY
60 Hz, 460 VY
Type →
Without flange
IM B3
Motor protection →
Without motor protection
Preferred/Express →
Preferred
Prated, Frame Article No.
Price plus MS
size
EUR
60 Hz
kW
FS
1LE1003-■■■■.-….
0-2AA4
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
0.75
80 M 1LE1003-0DA2.-….
546.–
1.1
80 M 1LE1003-0DA3.-….
625.–
1.5
90 S
1LE1003-0EA0.-….
722.–
2.2
90 L
1LE1003-0EA4.-….
929.–
With flange
IM B5
Without motor protection
Preferred
With standard flange
IM B14
Without motor protection
Preferred
0-2FA4
0-2KA4
598.10
677.10
784.50
991.50
598.10
677.10
784.50
991.50
Basic type 1LE
• Cooling: Self-ventilated (IC 411)
• Efficiency: Premium Efficiency IE3
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
50 Hz, 230 VΔ/400 VY
60 Hz, 460 VY
Type →
Without flange
IM B3
Motor protection →
Without
PTC thermistor with 1 or 3 embedded
Motor protection temperature sensors for tripping
Preferred/Express →
Preferred
Preferred
Express
Prated, Frame Article No.
Price plus MS
size
EUR
60 Hz
kW
FS
1LE1003-■■■■.-….
2-2AA4
2-2AB4
2-2AB4-Z
B19
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
0.75
80 M 1LE1003-0DA2.-….
–
581.30
–
1.1
80 M 1LE1003-0DA3.-….
–
660.30
–
1.5
90 S
1LE1003-0EA0.-….
–
763.40
–
2.2
90 L
1LE1003-0EA4.-….
–
970.40
–
3
100 L 1LE1003-1AA4.-….
1050.–
1164.–
–
4
112 M 1LE1003-1BA2.-….
1240.–
1354.–
–
5.5
132 S 1LE1003-1CA0.-….
1560.–
1731.–
–
7.5
132 S 1LE1003-1CA1.-….
1980.–
2151.–
2281.–
1/2
Siemens D 81.1 P · 03/2015
With flange
IM B5
Without
Motor protection
Preferred
PTC thermistor with 1 or 3 embedded
temperature sensors for tripping
Preferred
Express
2-2FA4
2-2FB4
–
–
–
–
1127.40
1336.10
1685.–
2105.–
633.40
712.40
825.90
1032.90
1241.40
1450.10
1856.–
2276.–
2-2FB4-Z
B19
–
–
–
–
–
–
–
2406.–
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
Preferred and Express motors
Standard delivery times in working days:
Express
10
20
Motors with Premium Efficiency IE3
SIMOTICS GP – Aluminum series 1LE1003
SIMOTICS SD – Cast-iron series 1LE1503
■ Selection and ordering data (continued)
Basic type 1LE
• Cooling: Self-ventilated (IC 411)
• Efficiency: Premium Efficiency IE3
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
50 Hz, 400 VΔ/690 VY
60 Hz, 460 VΔ
Type →
Without flange
IM B3
Motor protection →
Without motor PTC thermistor with 1 or 3
protection
embedded temperature
sensors for tripping
Preferred/Express →
Preferred
Preferred
Express
Prated, Frame Article No.
Price plus MS
size
EUR
60 Hz
kW
FS
1LE1■03-■■■■.-….
3-4AA4
3-4AB4
3-4AB4-Z
B19
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
3
100 L 1LE1003-1AA4.-….
1050.–
1164.–
–
4
112 M 1LE1003-1BA2.-….
1240.–
1354.–
–
5.5
132 S 1LE1003-1CA0.-….
1560.–
1731.–
–
7.5
132 S 1LE1003-1CA1.-….
1980.–
2151.–
2281.–
11
160 M 1LE1003-1DA2.-….
2740.–
2911.–
3081.–
15
160 M 1LE1003-1DA3.-….
3580.–
3751.–
3921.–
18.5
160 L 1LE1003-1DA4.-….
4270.–
4441.–
4611.–
22
180 M 1LE1003-1EA2.-....
–
5087.–
5367.–
22
180 M 1LE1503-1EA2.-....
5170.–
5397.–
5677.–
30
200 L 1LE1003-2AA4.-....
–
6537.–
6817.–
30
200 L 1LE1503-2AA4.-....
6710.–
6937.–
7217.–
37
200 L 1LE1003-2AA5.-....
–
8147.–
8427.–
37
200 L 1LE1503-2AA5.-....
8430.–
8657.–
8937.–
45
225 M 1LE1503-2BA2.-....
9800.–
10110.–
–
55
250 M 1LE1503-2CA2.-....
11700.–
12010.–
–
75
280 S 1LE1503-2DA0.-....
16000.–
16386.–
–
90
280 M 1LE1503-2DA2.-....
18900.–
19286.–
–
Recommended retail prices plus metal surcharges (MS)
With flange
IM B5
Without motor
protection
Preferred
PTC thermistor with 1 or 3
embedded temperature
sensors for tripping
Preferred
Express
3-4FA4
3-4FB4
1127.40
1336.10
1685.–
2105.–
2902.–
3742.–
4432.–
–
–
–
–
–
–
–
–
–
–
1241.40
1450.10
1856.–
2276.–
3073.–
3913.–
4603.–
–
5653.–
–
7248.–
–
8968.–
–
–
–
–
3-4FB4-Z
B19
–
–
–
2406.–
3243.–
4083.–
4773.–
–
–
–
–
–
–
–
–
–
–
Siemens D 81.1 P · 03/2015
1/3
1
© Siemens AG 2015
Preferred and Express motors
Motors with Premium Efficiency IE3
1
Standard delivery times in working days:
SIMOTICS GP – Aluminum series 1LE1003
SIMOTICS SD – Cast-iron series 1LE1503
Express
10
20
■ Selection and ordering data (continued)
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: Premium Efficiency IE3
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
50 Hz, 400 VY
60 Hz, 460 VY
Type →
Without flange
IM B3
Motor protection →
Without motor protection
Preferred/Express →
Preferred
Prated, Frame Article No.
Price plus MS
size
EUR
60 Hz
kW
FS
1LE1003-■■■■.-….
0-2AA4
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
0.55
80 M 1LE1003-0DB2.-…. 1)
541.–
0.75
80 M 1LE1003-0DB3.-….
591.–
1.1
90 S
1LE1003-0EB0.-….
700.–
1.5
90 L
1LE1003-0EB4.-….
830.–
With flange
IM B5
Without motor protection
Preferred
With standard flange
IM B14
Without motor protection
Preferred
0-2FA4
0-2KA4
593.10
643.10
762.50
892.50
593.10
643.10
762.50
892.50
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: Premium Efficiency IE3
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
Type →
Motor protection →
Preferred/Express →
Prated, Frame Article No.
size
60 Hz
kW
FS
1LE1003-■■■■.-….
50 Hz, 230 VΔ/400 VY
60 Hz, 460 VY
Without flange
IM B3
With flange
IM B5
Without motor
protection
Without motor
protection
Preferred
Price plus MS
EUR
2-2AA4
2-2AB4
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
0.55
80 M 1LE1003-0DB2.-…. 1)
–
0.75
80 M 1LE1003-0DB3.-….
–
1.1
90 S
1LE1003-0EB0.-….
–
1.5
90 L
1LE1003-0EB4.-….
–
2.2
100 L 1LE1003-1AB4.-….
956.–
3
100 L 1LE1003-1AB5.-….
1100.–
4
112 M 1LE1003-1BB2.-….
1340.–
5.5
132 S 1LE1003-1CB0.-….
1690.–
7.5
132 M 1LE1003-1CB2.-….
2140.–
11
160 M 1LE1003-1DB2.-….
2800.–
15
160 L 1LE1003-1DB4.-….
3640.–
1)
PTC thermistor with 1 or 3
embedded temperature
sensors for tripping
Preferred
Express
576.30
626.30
741.40
871.40
1070.–
1214.–
1454.–
1861.–
2311.–
2971.–
3811.–
2-2AB4-Z
B19
–
–
–
–
–
–
–
–
2441.–
3141.–
3981.–
Preferred
PTC thermistor with 1 or 3
embedded temperature
sensors for tripping
Preferred
Express
2-2FA4
2-2FB4
–
–
–
–
1033.40
1177.40
1436.10
1815.–
2265.–
2962.–
3802.–
628.40
678.40
803.90
933.90
1147.40
1291.40
1550.10
1986.–
2436.–
3133.–
3973.–
2-2FB4-Z
B19
–
–
–
–
–
–
–
–
2566.–
3303.–
4143.–
With standard
flange
IM B14
Without motor
protection
Preferred
2-2KA4
–
–
–
–
1033.40
1177.40
1436.10
–
–
–
–
Premium Efficiency IE3 is not stamped because the motor is not in
the IE2 output range from 0.75 to 375 kW.
1/4
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
Preferred and Express motors
Standard delivery times in working days:
Express
10
20
Motors with Premium Efficiency IE3
SIMOTICS GP – Aluminum series 1LE1003
SIMOTICS SD – Cast-iron series 1LE1503
■ Selection and ordering data (continued)
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: Premium Efficiency IE3
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
50 Hz, 400 VΔ/690 VY
60 Hz, 460 VΔ
Type →
Without flange
IM B3
Motor protection →
Without motor PTC thermistor with 1 or 3
protection
embedded temperature
sensors for tripping
Preferred/Express →
Preferred
Preferred
Express
Prated, Frame Article No.
Price plus MS
size
EUR
60 Hz
kW
FS
1LE1■03-■■■■.-….
3-4AA4
3-4AB4
3-4AB4-Z
B19
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
2.2
100 L 1LE1003-1AB4.-….
956.–
1070.–
–
3
100 L 1LE1003-1AB5.-….
1100.–
1214.–
–
4
112 M 1LE1003-1BB2.-….
1340.–
1454.–
–
5.5
132 S 1LE1003-1CB0.-….
1690.–
1861.–
–
7.5
132 M 1LE1003-1CB2.-….
2140.–
2311.–
2441.–
11
160 M 1LE1003-1DB2.-….
2800.–
2971.–
3141.–
15
160 L 1LE1003-1DB4.-….
3640.–
3811.–
3981.–
18.5
180 M 1LE1003-1EB2.-....
–
4357.–
4637.–
18.5
180 M 1LE1503-1EB2.-....
4390.–
4617.–
4897.–
22
180 L 1LE1003-1EB4.-....
–
5017.–
5297.–
22
180 L 1LE1503-1EB4.-....
5100.–
5327.–
5607.–
30
200 L 1LE1003-2AB5.-....
–
6447.–
6727.–
30
200 L 1LE1503-2AB5.-....
6620.–
6847.–
7127.–
37
225 S 1LE1503-2BB0.-....
7850.–
8160.–
8560.–
45
225 M 1LE1503-2BB2.-....
9240.–
9550.–
9950.–
55
250 M 1LE1503-2CB2.-....
11200.–
11510.–
11910.–
75
280 S 1LE1503-2DB0.-....
15100.–
15486.–
16026.–
90
280 M 1LE1503-2DB2.-....
17700.–
18086.–
–
110
315 S 1LE1503-3AB0.-....
22100.–
22486.–
–
132
315 M 1LE1503-3AB2.-....
26200.–
26586.–
–
160
315 L 1LE1503-3AB4.-....
31700.–
32086.–
–
200
315 L 1LE1503-3AB5.-....
39400.–
39786.–
–
Recommended retail prices plus metal surcharges (MS)
With flange
IM B5
Without motor
protection
Preferred
PTC thermistor with 1 or 3
embedded temperature
sensors for tripping
Preferred
Express
3-4FA4
3-4FB4
1033.40
1177.40
1436.10
1815.–
2265.–
2962.–
3802.–
–
4646.–
–
5356.–
–
6931.–
–
–
–
–
–
–
–
–
–
1147.40
1291.40
1550.10
1986.–
2436.–
3133.–
3973.–
4613.–
4873.–
5273.–
5583.–
6758.–
7158.–
–
–
–
–
–
–
–
–
–
3-4FB4-Z
B19
–
–
–
–
2566.–
3303.–
4143.–
4893.–
5153.–
5553.–
5863.–
7038.–
7438.–
–
–
–
–
–
–
–
–
–
With flange
IM B35
Without motor
protection
Preferred
3-4JA4
–
–
–
1848.–
2298.–
3028.–
3868.–
–
4736.–
–
5446.–
–
7075.–
–
–
–
–
–
–
–
–
–
Siemens D 81.1 P · 03/2015
1/5
1
© Siemens AG 2015
Preferred and Express motors
Motors with Premium Efficiency IE3
1
Standard delivery times in working days:
SIMOTICS GP – Aluminum series 1LE1003
SIMOTICS SD – Cast-iron series 1LE1503
Express
10
20
■ Selection and ordering data (continued)
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: Premium Efficiency IE3
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
50 Hz, 400 VY
60 Hz, 460 VY
Type →
Without flange
IM B3
Motor protection →
Without motor protection
Preferred/Express →
Preferred
Prated, Frame Article No.
Price plus MS
size
EUR
60 Hz
kW
FS
1LE1003-■■■■.-….
0-2AA4
6-pole: 1000 rpm at 50 Hz, 1200 rpm at 60 Hz
0.37
80 M 1LE1003-0DC2.-…. 1)
525.–
0.55
80 M 1LE1003-0DC3.-…. 1)
607.–
0.75
90 S
1LE1003-0EC0.-….
686.–
1.1
90 L
1LE1003-0EC4.-….
850.–
With flange
IM B5
Without motor protection
Preferred
With standard flange
IM B14
Without motor protection
Preferred
0-2FA4
0-2KA4
577.10
659.10
748.50
912.50
577.10
659.10
748.50
912.50
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: Premium Efficiency IE3
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
Type →
Motor protection →
Preferred/Express →
Prated, Frame Article No.
size
60 Hz
kW
FS
1LE1003-■■■■.-….
50 Hz, 230 VΔ/400 VY
60 Hz, 460 VY
Without flange
IM B3
With flange
IM B5
Without motor
protection
Without motor
protection
Preferred
Price plus MS
EUR
2-2AA4
2-2AB4
6-pole: 1000 rpm at 50 Hz, 1200 rpm at 60 Hz
0.37
80 M 1LE1003-0DC2.-…. 1)
–
0.55
80 M 1LE1003-0DC3.-…. 1)
–
0.75
90 S
1LE1003-0EC0.-….
–
1.1
90 L
1LE1003-0EC4.-….
–
1.5
100 L 1LE1003-1AC4.-….
945.–
2.2
112 M 1LE1003-1BC2.-….
1200.–
3
132 S 1LE1003-1CC0.-….
1500.–
4
132 M 1LE1003-1CC2.-….
1850.–
5.5
132 M 1LE1003-1CC3.-….
2320.–
7.5
160 M 1LE1003-1DC2.-….
2950.–
11
160 L 1LE1003-1DC4.-….
4070.–
1)
PTC thermistor with 1 or 3
embedded temperature
sensors for tripping
Preferred
Express
560.30
642.30
727.40
891.40
1059.–
1314.–
1671.–
2021.–
2491.–
3121.–
4241.–
2-2AB4-Z
B19
–
–
–
–
–
–
–
–
–
3291.–
4411.–
Preferred
PTC thermistor with 1 or 3
embedded temperature
sensors for tripping
Preferred
Express
2-2FA4
2-2FB4
–
–
–
–
1022.40
1296.10
1625.–
1975.–
2445.–
3112.–
4232.–
612.40
694.40
789.90
953.90
1136.40
1410.10
1796.–
2146.–
2616.–
3283.–
4403.–
2-2FB4-Z
B19
–
–
–
–
–
–
–
–
–
3453.–
4573.–
With standard
flange
IM B14
Without motor
protection
Preferred
2-2KA4
–
–
–
–
1022.40
1296.10
1625.–
–
–
–
–
Premium Efficiency IE3 is not stamped because the motor is not in
the IE2 output range from 0.75 to 375 kW.
1/6
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
Preferred and Express motors
Standard delivery times in working days:
Express
10
20
Motors with Premium Efficiency IE3
SIMOTICS GP – Aluminum series 1LE1003
SIMOTICS SD – Cast-iron series 1LE1503
■ Selection and ordering data (continued)
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: Premium Efficiency IE3
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
50 Hz, 400 VΔ/690 VY
60 Hz, 460 VΔ
Type →
Without flange
IM B3
Motor protection →
Without motor PTC thermistor with 1 or 3
protection
embedded temperature
sensors for tripping
Preferred/Express →
Preferred
Preferred
Express
Prated, Frame Article No.
Price plus MS
size
EUR
60 Hz
kW
FS
1LE1■03-■■■■.-….
3-4AA4
3-4AB4
3-4AB4-Z
B19
6-pole: 1000 rpm at 50 Hz, 1200 rpm at 60 Hz
1.5
100 L 1LE1003-1AC4.-….
945.–
1059.–
–
2.2
112 M 1LE1003-1BC2.-….
1200.–
1314.–
–
3
132 S 1LE1003-1CC0.-….
1500.–
1671.–
–
4
132 M 1LE1003-1CC2.-….
1850.–
2021.–
–
5.5
132 M 1LE1003-1CC3.-….
2320.–
2491.–
–
7.5
160 M 1LE1003-1DC2.-….
2950.–
3121.–
3291.–
11
160 L 1LE1003-1DC4.-….
4070.–
4241.–
4411.–
15
180 L 1LE1503-1EC4.-....
5450.–
5677.–
5957.–
18.5
200 L 1LE1503-2AC4.-....
6660.–
6887.–
7167.–
22
200 L 1LE1503-2AC5.-....
7710.–
7937.–
8217.–
30
225 M 1LE1503-2BC2.-....
10100.–
10410.–
–
37
250 M 1LE1503-2CC2.-....
12300.–
12610.–
–
45
280 S 1LE1503-2DC0.-....
15000.–
15386.–
–
55
280 M 1LE1503-2DC2.-....
17700.–
18086.–
–
75
315 S 1LE1503-3AC0.-....
24100.–
24100.–
–
90
315 M 1LE1503-3AC2.-....
27100.–
27486.–
–
110
315 L 1LE1503-3AC4.-....
32700.–
33086.–
–
132
315 L 1LE1503-3AC5.-....
38900.–
39286.–
–
160
315 L 1LE1503-3AC6.-....
47200.–
47586.–
–
Recommended retail prices plus metal surcharges (MS)
With flange
IM B5
Without motor
protection
Preferred
PTC thermistor with 1 or 3
embedded temperature
sensors for tripping
Preferred
Express
3-4FA4
3-4FB4
1022.40
1296.10
1625.–
1975.–
2445.–
3112.–
4232.–
5706.–
6974.–
8021.–
–
–
–
–
–
–
–
–
–
1136.40
1410.10
1796.–
2146.–
2616.–
3283.–
4403.–
5933.–
7198.–
8248.–
–
–
–
–
–
–
–
–
–
3-4FB4-Z
B19
–
–
–
–
–
3453.–
4573.–
6213.–
7478.–
8528.–
–
–
–
–
–
–
–
–
–
With flange
IM B35
Without motor
protection
Preferred
3-4JA4
–
–
–
2008.–
2478.–
3178.–
4298.–
5796.–
7115.–
8165.–
–
–
–
–
–
–
–
–
–
Siemens D 81.1 P · 03/2015
1/7
1
© Siemens AG 2015
Preferred and Express motors
Motors with High Efficiency IE2
1
Standard delivery times in working days:
SIMOTICS GP – Aluminum series 1LE1001
SIMOTICS SD – Cast-iron series 1LE1501
Express
10
20
■ Selection and ordering data
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: High Efficiency IE2
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
50 Hz, 400 VY
60 Hz, 460 VY
Type →
Without flange
IM B3
Motor protection →
Without motor protection
Preferred/Express →
Preferred
Prated, Frame Article No.
Price plus MS
size
EUR
50 Hz
kW
FS
1LE1001-■■■■.-….
0-2AA4
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
0.75
80 M 1LE1001-0DA2.-….
455.–
1.1
80 M 1LE1001-0DA3.-….
520.–
1.5
90 S
1LE1001-0EA0.-….
601.–
2.2
90 L
1LE1001-0EA4.-….
775.–
With flange
IM B5
Without motor protection
Preferred
With standard flange
IM B14
Without motor protection
Preferred
0-2FA4
0-2KA4
507.10
572.10
663.50
837.50
507.10
572.10
663.50
837.50
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: High Efficiency IE2
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
Type →
Motor protection →
Preferred/Express →
Prated, Frame Article No.
size
50 Hz
kW
FS
1LE1001-■■■■.-….
50 Hz, 230 VΔ/400 VY
60 Hz, 460 VY
Without flange
IM B3
Without motor protection
Preferred
Price plus MS
EUR
2-2AA4
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
0.75
80 M 1LE1001-0DA2.-….
–
1.1
80 M 1LE1001-0DA3.-….
–
1.5
90 S
1LE1001-0EA0.-….
–
2.2
90 L
1LE1001-0EA4.-….
–
3
100 L 1LE1001-1AA4.-….
930.–
4
112 M 1LE1001-1BA2.-….
1100.–
5.5
132 S 1LE1001-1CA0.-….
1380.–
7.5
132 S 1LE1001-1CA1.-….
1750.–
1/8
Siemens D 81.1 P · 03/2015
With flange
IM B5
Without motor protection
PTC thermistor with
1 or 3 embedded
temperature sensors
for tripping
Preferred
Express
2-2AB4
490.30
555.30
642.40
816.40
1044.–
1214.–
1551.–
1921.–
2-2AB4-Z
B19
540.30
605.30
692.40
866.40
1114.–
1304.–
1681.–
2051.–
Preferred
PTC thermistor with
1 or 3 embedded
temperature sensors
for tripping
Preferred
Express
2-2FA4
2-2FB4
–
–
–
–
1007.40
1196.10
1505.–
1875.–
542.40
607.40
704.90
878.90
1121.40
1310.10
1676.–
2046.–
2-2FB4-Z
B19
592.40
657.40
754.90
928.90
1191.40
1400.10
1806.–
2176.–
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
Preferred and Express motors
Motors with High Efficiency IE2
Standard delivery times in working days:
Express
10
SIMOTICS GP – Aluminum series 1LE1001
SIMOTICS SD – Cast-iron series 1LE1501
20
■ Selection and ordering data (continued)
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: High Efficiency IE2
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
Type →
Motor protection →
Preferred/Express →
Prated, Frame Article No.
size
50 Hz
1LE1■01-■■■■.-….
50 Hz, 400 VΔ/690 VY
60 Hz, 460 VΔ
Without flange
IM B3
Without motor protection
Preferred
Price plus MS
EUR
3-4AA4
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
3
100 L 1LE1001-1AA4.-….
930.–
4
112 M 1LE1001-1BA2.-….
1100.–
5.5
132 S 1LE1001-1CA0.-….
1380.–
7.5
132 S 1LE1001-1CA1.-….
1750.–
11
160 M 1LE1001-1DA2.-….
2430.–
15
160 M 1LE1001-1DA3.-….
3180.–
18.5
160 L 1LE1001-1DA4.-….
3790.–
22
180 M 1LE1501-1EA2.-....
4600.–
30
200 L 1LE1501-2AA4.-....
5960.–
37
200 L 1LE1501-2AA5.-....
7480.–
45
225 M 1LE1501-2BA2.-....
8930.–
55
250 M 1LE1501-2CA2.-....
10600.–
75
280 S 1LE1501-2DA0.-....
14500.–
90
280 M 1LE1501-2DA2.-....
17200.–
Recommended retail prices plus metal surcharges (MS)
PTC thermistor with
1 or 3 embedded
temperature sensors
for tripping
Preferred
Express
3-4AB4
3-4AB4-Z
B19
1044.–
1214.–
1551.–
1921.–
2601.–
3351.–
3961.–
4827.–
6187.–
7707.–
9240.–
10910.–
14886.–
17586.–
1144.–
1304.–
1681.–
2051.–
2771.–
3521.–
4131.–
5107.–
6467.–
7987.–
–
–
–
–
With flange
IM B5
Without motor protection
Preferred
PTC thermistor with
1 or 3 embedded
temperature sensors
for tripping
Preferred
Express
3-4FA4
3-4FB4
1007.40
1196.10
1505.–
1875.–
2592.–
3342.–
3952.–
–
–
–
–
–
–
–
1121.40
1310.10
1676.–
2046.–
2763.–
3513.–
4123.–
5083.–
6498.–
8018.–
–
–
–
–
Siemens D 81.1 P · 03/2015
3-4FB4-Z
B19
1191.40
1401.10
1806.–
2176.–
2933.–
3683.–
4293.–
–
–
–
–
–
–
–
1/9
1
© Siemens AG 2015
Preferred and Express motors
Motors with High Efficiency IE2
1
Standard delivery times in working days:
SIMOTICS GP – Aluminum series 1LE1001
SIMOTICS SD – Cast-iron series 1LE1501
Express
10
20
■ Selection and ordering data (continued)
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: High Efficiency IE2
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
50 Hz, 400 VY
60 Hz, 460 VY
Type →
Without flange
IM B3
Motor protection →
Without motor protection
Preferred/Express →
Preferred
Prated, Frame Article No.
Price plus MS
size
EUR
50 Hz
kW
FS
1LE1001-■■■■.-….
0-2AA4
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
0.55
80 M 1LE1001-0DB2.-…. 1)
452.–
0.75
80 M 1LE1001-0DB3.-….
493.–
1.1
90 S
1LE1001-0EB0.-….
583.–
1.5
90 L
1LE1001-0EB4.-….
692.–
With flange
IM B5
Without motor protection
Preferred
With standard flange
IM B14
Without motor protection
Preferred
0-2FA4
0-2KA4
504.10
545.10
645.50
754.50
504.10
545.10
645.50
754.50
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: High Efficiency IE2
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
Type →
Motor protection →
Preferred/Express →
Prated, Frame Article No.
size
50 Hz
kW
FS
1LE1001-■■■■.-….
50 Hz, 230 VΔ/400 VY
60 Hz, 460 VY
Without flange
IM B3
Without
Motor protection
Preferred
Price plus MS
EUR
2-2AA4
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
0.55
80 M 1LE1001-0DB2.-…. 1)
–
0.75
80 M 1LE1001-0DB3.-….
–
1.1
90 S
1LE1001-0EB0.-….
–
1.5
90 L
1LE1001-0EB4.-….
–
2.2
100 L 1LE1001-1AB4.-….
848.–
3
100 L 1LE1001-1AB5.-….
976.–
4
112 M 1LE1001-1BB2.-….
1200.–
5.5
132 S 1LE1001-1CB0.-….
1490.–
7.5
132 M 1LE1001-1CB2.-….
1890.–
11
160 M 1LE1001-1DB2.-….
2490.–
15
160 L 1LE1001-1DB4.-….
3220.–
1)
With flange
IM B5
PTC thermistor with
1 or 3 embedded
temperature sensors
for tripping
Preferred
Express
Without
Motor protection
Preferred
PTC thermistor with
1 or 3 embedded
temperature sensors
for tripping
Preferred
Express
2-2AB4
2-2FA4
2-2FB4
487.30
528.30
624.40
733.40
962.–
1090.–
1314.–
1661.–
2061.–
2661.–
3391.–
2-2AB4-Z
B19
537.30
578.30
674.40
783.40
1062.–
1160.–
1404.–
1791.–
2191.–
2831.–
3561.–
–
–
–
–
925.40
1053.40
1296.10
1615.–
2015.–
2652.–
3382.–
539.40
580.40
686.90
795.90
1039.40
1167.40
1410.10
1786.–
2186.–
2823.–
3553.–
2-2FB4-Z
B19
589.40
630.40
736.90
845.90
1109.–
1237.–
1500.–
1916.–
2316.–
2993.–
3723.–
With
standard
flange
IM B14
Without
motor
protection
Preferred
2-2KA4
–
–
–
–
925.40
1053.40
1296.10
–
–
–
–
High Efficiency IE2 is not stamped because the motor is not in
the IE2 output range from 0.75 to 375 kW.
1/10
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
Preferred and Express motors
Motors with High Efficiency IE2
Standard delivery times in working days:
Express
10
SIMOTICS GP – Aluminum series 1LE1001
SIMOTICS SD – Cast-iron series 1LE1501
20
■ Selection and ordering data (continued)
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: High Efficiency IE2
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
Type →
Motor protection →
Preferred/Express →
Prated, Frame Article No.
size
50 Hz
kW
FS
1LE1■01-■■■■.-….
50 Hz, 400 VΔ/690 VY
60 Hz, 460 VΔ
Without flange
IM B3
Without
Motor protection
Preferred
Price plus MS
EUR
3-4AA4
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
2.2
100 L 1LE1001-1AB4.-….
848.–
3
100 L 1LE1001-1AB5.-….
976.–
4
112 M 1LE1001-1BB2.-….
1200.–
5.5
132 S 1LE1001-1CB0.-….
1490.–
7.5
132 M 1LE1001-1CB2.-….
1890.–
11
160 M 1LE1001-1DB2.-….
2490.–
15
160 L 1LE1001-1DB4.-….
3220.–
18.5
180 M 1LE1501-1EB2.-....
3890.–
22
180 L 1LE1501-1EB4.-....
4530.–
30
200 L 1LE1501-2AB5.-....
5870.–
37
225 S 1LE1501-2BB0.-....
7130.–
45
225 M 1LE1501-2BB2.-....
8400.–
55
250 M 1LE1501-2CB2.-....
10200.–
75
280 S 1LE1501-2DB0.-....
13700.–
90
280 M 1LE1501-2DB2.-....
16100.–
110
315 S 1LE1501-3AB0.-....
20100.–
132
315 M 1LE1501-3AB2.-....
23800.–
160
315 L 1LE1501-3AB4.-....
28700.–
200
315 L 1LE1501-3AB5.-....
35900.–
Recommended retail prices plus metal surcharges (MS)
PTC thermistor with
1 or 3 embedded
temperature sensors
for tripping
Preferred
Express
3-4AB4
3-4AB4-Z
B19
962.–
1090.–
1314.–
1661.–
2061.–
2661.–
3391.–
4117.–
4757.–
6097.–
7440.–
8710.–
10510.–
14086.–
16486.–
20486.–
24186.–
29086.–
36286.–
1032.–
1160.–
1404.–
1791.–
2191.–
2831.–
3561.–
4397.–
5037.–
6377.–
7840.–
9110.–
10910.–
14626.–
–
–
–
–
–
With flange
IM B5
Without
Motor protection
Preferred
PTC thermistor with
1 or 3 embedded
temperature sensors
for tripping
Preferred
Express
3-4FA4
3-4FB4
925.40
1053.40
1296.10
1615.–
2015.–
2652.–
3382.–
4146.–
4786.–
6181.–
–
–
–
–
–
–
–
–
–
1039.40
1167.40
1410.10
1786.–
2186.–
2823.–
3553.–
4373.–
5013.–
6408.–
–
–
–
–
–
–
–
–
–
3-4FB4-Z
B19
1109.40
1237.40
1500.10
1916.–
2316.–
2993.–
3723.–
4653.–
5293.–
6688.–
Siemens D 81.1 P · 03/2015
With flange
IM B35
Without
motor
protection
Preferred
3-4JA4
–
–
–
1648.–
2048.–
2718.–
3448.–
4236.–
4876.–
6325.–
–
–
–
–
–
–
–
–
–
1/11
1
© Siemens AG 2015
Preferred and Express motors
Motors with High Efficiency IE2
1
Standard delivery times in working days:
SIMOTICS GP – Aluminum series 1LE1001
SIMOTICS SD – Cast-iron series 1LE1501
Express
10
20
■ Selection and ordering data (continued)
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: High Efficiency IE2
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
Type →
50 Hz, 230 VΔ/400 VY
60 Hz, 460 VY
Without flange
IM B3
Motor protection →
Without
Motor protection
Preferred/Express →
Preferred
Prated, Frame Article No.
Price plus MS
size
EUR
50 Hz
kW
FS
1LE1001-■■■■.-….
2-2AA4
6-pole: 1000 rpm at 50 Hz, 1200 rpm at 60 Hz
0.37
80 M 1LE1001-0DC2.-…. 1)
–
0.55
80 M 1LE1001-0DC3.-…. 1)
–
0.75
90 S
1LE1001-0EC0.-….
–
1.1
90 L
1LE1001-0EC4.-….
–
1.5
100 L 1LE1001-1AC4.-….
838.–
2.2
112 M 1LE1001-1BC2.-….
1060.–
3
132 S 1LE1001-1CC0.-….
1330.–
4
132 M 1LE1001-1CC2.-….
1640.–
5.5
132 M 1LE1001-1CC3.-….
2070.–
1)
With flange
IM B5
PTC thermistor with
3 embedded temperature
sensors for tripping
Preferred
Without motor
protection
Preferred
PTC thermistor with
3 embedded temperature
sensors for tripping
Preferred
2-2AB4
2-2FA4
2-2FB4
472.30
541.30
613.40
750.40
–
–
–
–
–
–
–
–
–
915.40
1156.10
1455.–
1765.–
–
524.40
593.40
675.90
812.90
1029.40
1270.10
1626.–
–
–
With standard
flange
IM B14
Without motor
protection
Preferred
2-2KA4
–
–
–
–
915.40
1156.10
–
–
–
High Efficiency IE2 is not stamped because the motor is not in
the IE2 output range from 0.75 to 375 kW.
1/12
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
Preferred and Express motors
Motors with High Efficiency IE2
Standard delivery times in working days:
Express
10
SIMOTICS GP – Aluminum series 1LE1001
SIMOTICS SD – Cast-iron series 1LE1501
20
■ Selection and ordering data (continued)
Basic type 1LE1
• Cooling: Self-ventilated (IC 411)
• Efficiency: High Efficiency IE2
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
Type →
Motor protection →
50 Hz, 400 VΔ/690 VY
60 Hz, 460 VΔ
Without flange
IM B3
With flange
IM B5
Without motor
protection
Without motor
protection
PTC thermistor with
3 embedded temperature
sensors for tripping
Preferred
Preferred/Express →
Preferred
Prated, Frame Article No.
Price plus MS
size
EUR
50 Hz
kW
FS
1LE1■01-■■■■.-….
3-4AA4
3-4AB4
6-pole: 1000 rpm at 50 Hz, 1200 rpm at 60 Hz
3
132 S 1LE1001-1CC0.-….
1330.–
1501.–
4
132 M 1LE1001-1CC2.-….
1640.–
1811.–
5.5
132 M 1LE1001-1CC3.-….
2070.–
2241.–
7.5
160 M 1LE1001-1DC2.-….
2620.–
2791.–
11
160 L 1LE1001-1DC4.-….
3610.–
3781.–
15
180 L 1LE1501-1EC4.-....
4830.–
5057.–
18.5
200 L 1LE1501-2AC4.-....
5910.–
6137.–
22
200 L 1LE1501-2AC5.-....
6850.–
7077.–
Recommended retail prices plus metal surcharges (MS)
Preferred
PTC thermistor with
3 embedded temperature
sensors for tripping
Preferred
3-4FA4
3-4FB4
1455.–
1765.–
2195.–
2782.–
3772.–
–
–
–
–
1936.–
2366.–
2953.–
3943.–
–
–
–
Siemens D 81.1 P · 03/2015
1/13
1
© Siemens AG 2015
Preferred and Express motors
Motors with Standard Efficiency
1
Standard delivery times in working days:
Express
SIMOTICS GP – Aluminum series 1LA7
10
20
■ Selection and ordering data
Basic type 1LA7
• Cooling: Self-ventilated (IC 411)
• Efficiency: Standard Efficiency
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
Type →
Motor protection →
Preferred/Express →
Prated, Frame CCC Article No.
size
50 Hz
kW
FS
1LA7■■■-■■■..
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
0.18
63 M ■
1LA7060-2AA..
0.25
63 M ■
1LA7063-2AA..
0.37
71 M ■
1LA7070-2AA..
0.55
71 M ■
1LA7073-2AA..
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
0.12
63 M ■
1LA7060-4AB..
0.18
63 M ■
1LA7063-4AB..
0.25
71 M ■
1LA7070-4AB..
0.37
71 M ■
1LA7073-4AB..
0.55
80 M ■
1LA7080-4AA..
6-pole: 1000 rpm at 50 Hz, 1200 rpm at 60 Hz
0.18
71 M ■
1LA7070-6AA..
0.25
71 M ■
1LA7073-6AA..
0.37
80 M ■
1LA7080-6AA..
0.55
80 M ■
1LA7083-6AA..
■
50 Hz, 230 VΔ/400 VY
60 Hz, 460 VY
Without flange
IM B3
Without
PTC thermistor with
Motor protection
3 embedded
temperature
sensors
for tripping
Preferred
Preferred
Price plus MS
EUR
10
10-Z A11
With flange
IM B5
Without
Motor protection
Preferred
PTC thermistor with
3 embedded
temperature
sensors
for tripping
Preferred
11
11-Z A11
With standard flange
IM B14
Without
Motor protection
Preferred
12
269.–
285.–
289.–
324.–
–
–
–
413.30
310.40
326.40
334.90
369.90
–
–
424.20
459.20
310.40
326.40
334.90
369.90
264.–
285.–
286.–
318.–
342.–
–
–
375.30
407.30
446.–
305.40
326.40
331.90
363.90
394.10
394.70
415.70
421.20
453.20
498.10
305.40
326.40
331.90
363.90
394.10
303.–
338.–
357.–
413.–
–
–
–
–
348.90
383.90
409.10
465.10
438.20
473.20
513.10
569.10
348.90
383.90
409.10
465.10
With "CCC" (China Compulsory Certification) for export to China
1/14
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
Preferred and Express motors
Motors with Standard Efficiency
Standard delivery times in working days:
Express
10
SIMOTICS GP – Aluminum series 1LA7 and 1LE1
Pole-changing versions
20
■ Selection and ordering data
Basic type 1LA7 and 1LE1
• Cooling: Self-ventilated (IC 411)
• Pole-changing version: Double pole-changing for square-law load torque, e.g. for driving fans
• Insulation: Thermal class 155 (temperature class F), IP55 degree of protection, utilization in accordance with thermal class 130
(temperature class B)
• Metal factor for metal surcharges (MS): N - W - - - - • Price group: 3Z0
Voltage →
Type →
50 Hz, 400 V
Without flange
IM B3
Motor protection →
PTC thermistor with
3 or 6 embedded
temperature sensors
for tripping
Preferred/Express →
Preferred
Prated1,
Prated2,
Frame
CCC Article No.
Price plus MS
size
EUR
50 Hz
50 Hz
1LE1■1■-■■■■.-….
3-4AB4
kW
kW
FS
1LA7■■■-■■■..
60-Z A11
4/2-pole: 1500/3000 rpm at 50 Hz with one winding connected in Dahlander circuit
1500 rpm
3000 rpm
0.25
0.95
80 M
■
1LA7083-0BA..
712.–
0.33
1.4
90 S
■
1LA7090-0BA..
835.–
0.5
2
90 L
■
1LA7096-0BA..
981.–
0.65
2.5
100 L
1LE1011-1AP4.-....
1011.–
0.8
3.1
100 L
1LE1011-1AP5.-....
1184.–
1.1
4.4
112 M
1LE1011-1BP2.-....
1444.–
6/4-pole: 1000/1500 rpm at 50 Hz with two windings
1000 rpm
1500 rpm
0.12
0.4
80 M
■
1LA7080-1BD..
726.–
0.18
0.55
80 M
■
1LA7083-1BD..
788.–
0.29
0.8
90 S
■
1LA7090-1BD..
905.–
0.38
1.1
90 L
■
1LA7096-1BD..
1030.–
0.6
1.7
100 L
1LE1012-1AQ4.-....
1187.–
0.75
2.1
100 L
1LE1012-1AQ5.-....
1299.–
0.9
3
112 M
1LE1012-1BQ2.-....
1469.–
1.2
3.9
132 S
1LE1012-1CQ0.-....
1880.–
1.7
5.4
132 M
1LE1012-1CQ2.-....
2230.–
2.5
7.2
160 M
1LE1012-1DQ2.-....
3100.–
3.7
12
160 L
1LE1012-1DQ4.-....
4360.–
8/4-pole: 750/1500 rpm at 50 Hz with one winding connected in Dahlander circuit
750 rpm
1500 rpm
0.1
0.5
80 M
■
1LA7080-0BB..
568.–
0.15
0.7
80 M
■
1LA7083-0BB..
635.–
0.5
2
100 L
1LE1011-1AR4.-....
868.–
0.65
2.5
100 L
1LE1011-1AR5.-....
984.–
0.9
3.6
112 M
1LE1011-1BR2.-....
1124.–
1.1
4.7
132 S
1LE1011-1CR0.-....
1581.–
1.4
6.4
132 M
1LE1011-1CR2.-....
1991.–
2.2
9.5
160 M
1LE1011-1DR2.-....
2681.–
3.3
14
160 L
1LE1011-1DR4.-....
3891.–
■
With "CCC" (China Compulsory Certification) for export to China
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
1/15
1
© Siemens AG 2015
Preferred and Express motors
Motors with Standard Efficiency
1
Express
Notes
1/16
Standard delivery times in working days:
Siemens D 81.1 P · 03/2015
10
20
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP/SD
1LE1/1PC1/1LA/1LG/1LP/1PP
Standard Motors
2/2
2/2
2/2
2/3
2/4
2/6
2/7
2/8
2/9
2/10
2/10
2/11
2/13
2/14
2/14
2/14
2/15
2/16
2/17
2/18
2/19
2/20
2/21
2/22
2/22
2/23
2/24
2/24
2/25
2/27
2/27
2/28
Motors with High Efficiency IE2
Self-ventilated or forced-air cooled motors –
Aluminum series 1LE1001
Self-ventilated motors – Aluminum series
1LE1001 with increased output
Naturally cooled motors without
external fan – Aluminum series 1PC1001
Self-ventilated motors – Cast-iron series
1LE1501/1LE1601 Basic/Performance Line
Self-ventilated motors – Cast-iron series
1LE1501/1LE1601 with increased output
Self-ventilated motors – Aluminium
series 1LA9
Self-ventilated motors – Cast-iron
series 1LG6
Self-ventilated motors – Cast-iron series
1LG6 with increased output
2/29
Motors with Premium Efficiency IE3
Self-ventilated motors –
Aluminum series 1LE1003
Self-ventilated motors –
Cast-iron series 1LE1503/1LE1603
Basic/Performance Line
Self-ventilated motors – Cast-iron series
1LG6 with order code D25
2/36
Motors with Standard Efficiency IE1
Self-ventilated or forced-air cooled motors –
Aluminum series 1LE1002
Self-ventilated motors – Aluminum series
1LE1002 with increased output
Naturally cooled motors without external
fan – Aluminum series 1PC1002
Self-ventilated motors – Aluminum series
1LA7 and 1LA5
Self-ventilated motors – Aluminum series
1LA9 with increased output
Forced-air cooled motors without external
fan and fan cover – Aluminum series 1PP7
and 1PP5
Naturally cooled motors without external
fan – Aluminum series 1LP7 and 1LP5
Self-ventilated motors – Cast-iron series
1LA6 and 1LG4
Self-ventilated motors – Cast-iron series
1LG4 with increased output
Forced-air cooled motors without external
fan and fan cover – Cast-iron series 1PP4
Forced-air cooled motors without external
fan and fan cover – Cast-iron series 1PP4
with increased output
Naturally cooled motors without external
fan – Cast-iron series 1LP4
NEMA Energy Efficient MG1
motors Table 12-11
Self-ventilated or forced-air cooled motors –
Aluminum series 1LE1021
Self-ventilated – Cast-iron series
1LE1521/1LE1621 Basic/Performance Line
Self-ventilated motors – Aluminum series
1LA9 with order code D42
Self-ventilated motors – Cast-iron series
1LG6 with order code D42
Self-ventilated motors – Cast-iron series
1LG6 with increased output
with order code D42
2/29
2/30
2/32
2/33
2/33
2/33
2/34
2/35
2/37
2/37
2/38
2/39
2/39
2/39
2/40
2/41
2/42
2/43
2/44
2/45
2/46
2/46
2/51
2/55
2/58
2/62
2/62
2/63
2/64
2/64
2/65
2/66
2/66
2/71
2/79
2/87
2/97
2/97
2
NEMA Premium Efficient MG1
motors Table 12-12
Self-ventilated or forced-air cooled motors –
Cast-iron series 1LE1023
Self-ventilated motors – Cast-iron series
1LE1523/1LE1623 Basic/Performance Line
Self-ventilated motors – Cast-iron series
1LG6 with order code D41
Pole-changing motors
Self-ventilated motors – Aluminum series
1LE1011 for constant load torque
Self-ventilated motors – Aluminum series
1LE1011/1LE1012 for square-law load torque
Self-ventilated motors – Aluminum series
1LA7 and 1LA5 for constant load torque
Self-ventilated motors – Aluminum series
1LA7 and 1LA5 for driving fans
Self-ventilated motors – Cast-iron series
1LG4 for driving fans
Motors for converter-fed operation only
Self-ventilated motors – Aluminum series
1LA7 and 1LA5 with special insulation
Self-ventilated motors – Cast-iron series
1LG6 with special insulation
Supplements to article numbers and
special versions
Voltages
Aluminum series 1LE10, 1PC10
Aluminum series 1LE1011, 1LE1012 –
pole changing
Cast-iron series 1LE15 Basic Line,
1LE16 Performance Line
Aluminum series 1LA7, 1LA5, 1LA9,
1LP7, 1LP5, 1PP7, 1PP5
Aluminum series 1LA7, 1LA5 –
pole-changing for converter-fed operation
Cast-iron series 1LA6, 1LG4, 1LG6,
1LP4, 1PP4
Cast-iron series 1LG4 – pole-changing,
1LG6 – for converter-fed operation only
Types of construction
Aluminum series 1LE10, 1PC10
Cast-iron series 1LE15 Basic Line,
1LE16 Performance Line
Aluminum series 1LA7, 1LA5, 1LA9,
1LP7, 1LP5, 1PP7, 1PP5
Cast-iron series 1LA6, 1LG4, 1LG6,
1LP4, 1PP4
Motor protection
Aluminum series 1LE10, 1PC10
Cast-iron series 1LE15 Basic Line,
1LE16 Performance Line
Connection box position
Aluminum series 1LE10, 1PC10
Cast-iron series 1LE15 Basic Line,
1LE16 Performance Line
Options
Aluminum series 1LE10, 1PC10
Cast-iron series 1LE15 Basic Line,
1LE16 Performance Line
Aluminum series 1LA7, 1LA5, 1LA9,
1LP7, 1LP5, 1PP7, 1PP5
Cast-iron series 1LA6, 1LG4, 1LG6,
1LP4, 1PP4
Accessories
Modular technology
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
SIMOTICS GP 1LE1 Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview
Category
Motors with High Efficiency IE2
Series version
Aluminum series 1LE1001
Cooling
2
Aluminum series 1LE1001
with increased output
Self-ventilated (IC 411)
Self-ventilated (IC 411) or with order code F90, forced-air
cooled without external fan and fan cover (IC 416)
Degree of protection
IP55, optionally IP56 or IP65
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
2, 4, 6
Frame sizes (FS)
80 M ... 160 L
100 L ... 160 L
Rated output at 50 Hz
0.37 ... 18.5 kW
2.2 ... 22 kW
Synchronous speed
750 ... 3600 rpm
1000 ... 3600 rpm
Rated torque at 50 Hz
2.6 ... 108 Nm
13 ... 147 Nm
Efficiency
High Efficiency IE2
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - N-W----Price group (PG)
3Z1
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Prated, IE
Frame
Article No.
Base
class
size
price
class
size
price
50 Hz
50 Hz
kW
FS
 New
EUR
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
0.75
IE2
80 M
1LE1001-0DA2.-....
455.–
1.1
IE2
80 M
1LE1001-0DA3.-....
520.–
1.5
IE2
90 S
1LE1001-0EA0.-....
601.–
2.2
IE2
90 L
1LE1001-0EA4.-....
775.–
3
IE2
100 L
1LE1001-1AA4.-....
930.– 4
IE2
100 L
1LE1001-1AA6.-.... 1100.–
4
IE2
112 M
1LE1001-1BA2.-.... 1100.– 5.5
IE2
112 M
1LE1001-1BA6.-.... 1380.–
5.5
IE2
132 S
1LE1001-1CA0.-.... 1380.–
7.5
IE2
132 S
1LE1001-1CA1.-.... 1750.–
11
IE2
132 M
1LE1001-1CA6.-.... 2430.–
11
IE2
160 M
1LE1001-1DA2.-.... 2430.–
15
IE2
160 M
1LE1001-1DA3.-.... 3180.–
18.5
IE2
160 L
1LE1001-1DA4.-.... 3790.– 22
IE2
160 L
1LE1001-1DA6.-.... 4470.–
4-pole: 1500 rpm at 50 Hz
0.55
–
80 M
1LE1001-0DB2.-....
452.–
0.75
IE2
80 M
1LE1001-0DB3.-....
493.–
1.1
IE2
90 S
1LE1001-0EB0.-....
583.–
1.5
IE2
90 L
1LE1001-0EB4.-....
692.–
2.2
IE2
100 L
1LE1001-1AB4.-....
848.– 4
IE2
100 L
1LE1001-1AB6.-.... 1200.–
3
IE2
100 L
1LE1001-1AB5.-....
976.–
4
IE2
112 M
1LE1001-1BB2.-.... 1200.– 5.5
IE2
112 M
1LE1001-1BB6.-.... 1490.–
5.5
IE2
132 S
1LE1001-1CB0.-.... 1490.–
7.5
IE2
132 M
1LE1001-1CB2.-.... 1890.– 11
IE2
132 M
1LE1001-1CB6.-.... 2490.–
11
IE2
160 M
1LE1001-1DB2.-.... 2490.–
15
IE2
160 L
1LE1001-1DB4.-.... 3220.– 18.5
IE2
160 L
1LE1001-1DB6.-.... 3800.–
6-pole: 1000 rpm at 50 Hz
0.37
–
80 M
1LE1001-0DC2.-....
437.–
0.55
–
80 M
1LE1001-0DC3.-....
506.–
0.75
IE2
90 S
1LE1001-0EC0.-....
572.–
1.1
IE2
90 L
1LE1001-0EC4.-....
709.–
1.5
IE2
100 L
1LE1001-1AC4.-....
838.– 2.2
IE2
100 L
1LE1001-1AC6.-.... 1060.–
2.2
IE2
112 M
1LE1001-1BC2.-.... 1060.– 3
IE2
112 M
1LE1001-1BC6.-.... 1330.–
3
IE2
132 S
1LE1001-1CC0.-.... 1330.–
4
IE2
132 M
1LE1001-1CC2.-.... 1640.– 7.5
IE2
132 M
1LE1001-1CC6.-.... 2620.–
5.5
IE2
132 M
1LE1001-1CC3.-.... 2070.–
7.5
IE2
160 M
1LE1001-1DC2.-.... 2620.–
11
IE2
160 L
1LE1001-1DC4.-.... 3610.– 15
IE2
160 L
1LE1001-1DC6.-.... 4680.–
8-pole: 750 rpm at 50 Hz
0.75
–
100 L
1LE1001-1AD4.-....
938.–
1.1
–
100 L
1LE1001-1AD5.-.... 1190.–
1.5
–
112 M
1LE1001-1BD2.-.... 1410.–
2.2
–
132 S
1LE1001-1CD0.-.... 1820.–
3
–
132 M
1LE1001-1CD2.-.... 2220.–
4
–
160 M
1LE1001-1DD2.-.... 2720.–
5.5
–
160 M
1LE1001-1DD3.-.... 3340.–
7.5
–
160 L
1LE1001-1DD4.-.... 4030.–
2/2
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1PC1 Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with High Efficiency IE2 (continued)
Series version
Aluminum series 1PC1001 1)
Cooling
Naturally cooled without external fan (IC 410)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
100 L ... 160 L
Rated output at 50 Hz
0.37 ... 9 kW
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
On request 1)
Efficiency
On request 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
1.4
1.6
3.1
4.3
1)
O. R.
O. R.
O. R.
O. R.
100 L
112 M
132 S
132 S
1PC1001-1AA4.-....
1PC1001-1BA2.-....
1PC1001-1CA0.-....
1PC1001-1CA1.-....
1180.–
1350.–
1640.–
2020.–
6.3
O. R.
160 M
1PC1001-1DA2.-....
6.5
O. R.
160 M
1PC1001-1DA3.-....
9
O. R.
160 L
1PC1001-1DA4.-....
4-pole: 1500 rpm at 50 Hz
2710.–
3470.–
4090.–
1.1
O. R.
100 L
1.5
O. R.
100 L
2
O. R.
112 M
2.6
O. R.
132 S
4
O. R.
132 M
6
O. R.
160 M
6.2
O. R.
160 L
6-pole: 1000 rpm at 50 Hz
1PC1001-1AB4.-....
1PC1001-1AB5.-....
1PC1001-1BB2.-....
1PC1001-1CB0.-....
1PC1001-1CB2.-....
1PC1001-1DB2.-....
1PC1001-1DB4.-....
1090.–
1220.–
1450.–
1750.–
2160.–
2760.–
3520.–
0.85
O. R.
100 L
1.2
O. R.
112 M
1.5
O. R.
132 S
2.5
O. R.
132 M
2.7
O. R.
132 M
5
O. R.
160 M
6.5
O. R.
160 L
8-pole: 750 rpm at 50 Hz
0.37
–
100 L
0.55
–
100 L
0.75
–
112 M
1.1
–
132 S
1.5
–
132 M
2.4
–
160 M
3.3
–
160 M
4.6
–
160 L
1PC1001-1AC4.-....
1PC1001-1BC2.-....
1PC1001-1CC0.-....
1PC1001-1CC2.-....
1PC1001-1CC3.-....
1PC1001-1DC2.-....
1PC1001-1DC4.-....
1080.–
1310.–
1590.–
1900.–
2330.–
2890.–
3910.–
1PC1001-1AD4.-....
1PC1001-1AD5.-....
1PC1001-1BD2.-....
1PC1001-1CD0.-....
1PC1001-1CD2.-....
1PC1001-1DD2.-....
1PC1001-1DD3.-....
1PC1001-1DD4.-....
1180.–
1440.–
1660.–
2080.–
2490.–
3000.–
3640.–
4340.–
The rated outputs and weights may change slightly after they have been checked. Further electrical data can be calculated and supplied on receipt of order.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/3
2
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors with High Efficiency IE2 (continued)
Series version
2
Cast-iron series 1LE1501/1LE1601
Basic/Performance Line
(continued on the next page)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
71 M ... 315 L
Rated output at 50 Hz
0.18 ... 200 kW
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
1.3 ... 1546 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Article No.
Base
class
size
price
50 Hz
Basic Line
Performance Line price
kW
FS

2-pole: 3000 rpm at 50 Hz
0.37
IE2
71 M 
0.55
IE2
71 M 
0.75
IE2
80 M 
1.1
IE2
80 M 
1.5
IE2
90 S

2.2
IE2
90 L

3
IE2
100 L
4
IE2
112 M
5.5
IE2
132 S
7.5
IE2
132 S
11
IE2
160 M
15
IE2
160 M
18.5
IE2
160 L
22
IE2
180 M
30
IE2
200 L
37
IE2
200 L
45
IE2
225 M
55
IE2
250 M
75
IE2
280 S
90
IE2
280 M
110
IE2
315 S
132
IE2
315 M
160
IE2
315 L
200
IE2
315 L
4-pole: 1500 rpm at 50 Hz
0.25
IE2
71 M 
0.37
IE2
71 M 
0.55
IE2
80 M 
0.75
IE2
80 M 
1.1
IE2
90 S

1.5
IE2
90 L

2.2
IE2
100 L
3
IE2
100 L
4
IE2
112 M
5.5
IE2
132 S
7.5
IE2
132 M
11
IE2
160 M
15
IE2
160 L
18.5
IE2
180 M
22
IE2
180 L
30
IE2
200 L
37
IE2
225 S
45
IE2
225 M
55
IE2
250 M
75
IE2
280 S
90
IE2
280 M
110
IE2
315 S
132
IE2
315 M
160
IE2
315 L
200
IE2
315 L
2/4
Siemens D 81.1 P · 03/2015
 New
New
EUR
EUR
1LE1501-0CA2.-....
1LE1501-0CA3.-....
1LE1501-0DA2.-....
1LE1501-0DA3.-....
1LE1501-0EA0.-....
1LE1501-0EA4.-....
1LE1501-1AA4.-....
1LE1501-1BA2.-....
1LE1501-1CA0.-....
1LE1501-1CA1.-....
1LE1501-1DA2.-....
1LE1501-1DA3.-....
1LE1501-1DA4.-....
1LE1501-1EA2.-....
1LE1501-2AA4.-....
1LE1501-2AA5.-....
1LE1501-2BA2.-....
1LE1501-2CA2.-....
1LE1501-2DA0.-....
1LE1501-2DA2.-....
1LE1501-3AA0.-....
1LE1501-3AA2.-....
1LE1501-3AA4.-....
1LE1501-3AA5.-....
465.–
546.–
562.–
642.–
742.–
908.–
1010.–
1200.–
1500.–
1910.–
2640.–
3440.–
4110.–
4600.–
5960.–
7480.–
8930.–
10600.–
14500.–
17200.–
20600.–
24700.–
30700.–
38300.–
1LE1601-1AA4.-....
1LE1601-1BA2.-....
1LE1601-1CA0.-....
1LE1601-1CA1.-....
1LE1601-1DA2.-....
1LE1601-1DA3.-....
1LE1601-1DA4.-....
1LE1601-1EA2.-....
1LE1601-2AA4.-....
1LE1601-2AA5.-....
1LE1601-2BA2.-....
1LE1601-2CA2.-....
1LE1601-2DA0.-....
1LE1601-2DA2.-....
1LE1601-3AA0.-....
1LE1601-3AA2.-....
1LE1601-3AA4.-....
1LE1601-3AA5.-....
1110.–
1310.–
1660.–
2100.–
3040.–
3960.–
4720.–
5060.–
6550.–
8230.–
9800.–
11700.–
14900.–
18000.–
21700.–
25900.–
32200.–
40200.–
1LE1501-0CB2.-....
1LE1501-0CB3.-....
1LE1501-0DB2.-....
1LE1501-0DB3.-....
1LE1501-0EB0.-....
1LE1501-0EB4.-....
1LE1501-1AB4.-....
1LE1501-1AB5.-....
1LE1501-1BB2.-....
1LE1501-1CB0.-....
1LE1501-1CB2.-....
1LE1501-1DB2.-....
1LE1501-1DB4.-....
1LE1501-1EB2.-....
1LE1501-1EB4.-....
1LE1501-2AB5.-....
1LE1501-2BB0.-....
1LE1501-2BB2.-....
1LE1501-2CB2.-....
1LE1501-2DB0.-....
1LE1501-2DB2.-....
1LE1501-3AB0.-....
1LE1501-3AB2.-....
1LE1501-3AB4.-....
1LE1501-3AB5.-....
462.–
518.–
558.–
609.–
720.–
811.–
919.–
1060.–
1290.–
1620.–
2060.–
2700.–
3500.–
3890.–
4530.–
5870.–
7130.–
8400.–
10200.–
13700.–
16100.–
20100.–
23800.–
28700.–
35900.–
1LE1601-1AB4.-....
1LE1601-1AB5.-....
1LE1601-1BB2.-....
1LE1601-1CB0.-....
1LE1601-1CB2.-....
1LE1601-1DB2.-....
1LE1601-1DB4.-....
1LE1601-1EB2.-....
1LE1601-1EB4.-....
1LE1601-2AB5.-....
1LE1601-2BB0.-....
1LE1601-2BB2.-....
1LE1601-2CB2.-....
1LE1601-2DB0.-....
1LE1601-2DB2.-....
1LE1601-3AB0.-....
1LE1601-3AB2.-....
1LE1601-3AB4.-....
1LE1601-3AB5.-....
1010.–
1170.–
1430.–
1780.–
2260.–
3100.–
4030.–
4280.–
4980.–
6460.–
7850.–
9240.–
11200.–
14100.–
16600.–
20700.–
24500.–
29600.–
36900.–
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with High Efficiency IE2 (continued)
Series version
Cast-iron series 1LE1501/1LE1601
Basic/Performance Line
(continued)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
71 M ... 315 L
Rated output at 50 Hz
0.18 ... 200 kW
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
1.3 ... 1546 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Article No.
Base
class
size
price
50 Hz
Basic Line
Performance Line price
kW
FS

6-pole: 1000 rpm at 50 Hz
0.18
IE2
71 M 
0.25
IE2
71 M 
0.37
IE2
80 M 
0.55
IE2
80 M 
0.75
IE2
90 S

1.1
IE2
90 L

1.5
IE2
100 L
2.2
IE2
112 M
3
IE2
132 S
4
IE2
132 M
5.5
IE2
132 M
7.5
IE2
160 M
11
IE2
160 L
15
IE2
180 L
18.5
IE2
200 L
22
IE2
200 L
30
IE2
225 M
37
IE2
250 M
45
IE2
280 S
55
IE2
280 M
75
IE2
315 S
90
IE2
315 M
110
IE2
315 L
132
IE2
315 L
160
IE2
315 L
8-pole: 750 rpm at 50 Hz
0.75
–
100 L
1.1
–
100 L
1.5
–
112 M
2.2
–
132 S
3
–
132 M
4
–
160 M
5.5
–
160 M
7.5
–
160 L
11
IE2
180 L
15
IE2
200 L
18.5
IE2
225 S
22
IE2
225 M
30
IE2
250 M
37
IE2
280 S
45
IE2
280 M
55
IE2
315 S
75
IE2
315 M
90
IE2
315 L
110
IE2
315 L
132
IE2
315 L
Recommended retail prices plus metal surcharges (MS)
 New
New
EUR
EUR
1LE1501-0CC2.-....
1LE1501-0CC3.-....
1LE1501-0DC2.-....
1LE1501-0DC3.-....
1LE1501-0EC0.-....
1LE1501-0EC4.-....
1LE1501-1AC4.-....
1LE1501-1BC2.-....
1LE1501-1CC0.-....
1LE1501-1CC2.-....
1LE1501-1CC3.-....
1LE1501-1DC2.-....
1LE1501-1DC4.-....
1LE1501-1EC4.-....
1LE1501-2AC4.-....
1LE1501-2AC5.-....
1LE1501-2BC2.-....
1LE1501-2CC2.-....
1LE1501-2DC0.-....
1LE1501-2DC2.-....
1LE1501-3AC0.-....
1LE1501-3AC2.-....
1LE1501-3AC4.-....
1LE1501-3AC5.-....
1LE1501-3AC6.-....
447.–
532.–
539.–
625.–
706.–
823.–
908.–
1150.–
1450.–
1780.–
2240.–
2830.–
3920.–
4830.–
5910.–
6850.–
9180.–
11200.–
13600.–
16100.–
21900.–
24700.–
29700.–
35400.–
42900.–
1LE1601-1AC4.-....
1LE1601-1BC2.-....
1LE1601-1CC0.-....
1LE1601-1CC2.-....
1LE1601-1CC3.-....
1LE1601-1DC2.-....
1LE1601-1DC4.-....
1LE1601-1EC4.-....
1LE1601-2AC4.-....
1LE1601-2AC5.-....
1LE1601-2BC2.-....
1LE1601-2CC2.-....
1LE1601-2DC0.-....
1LE1601-2DC2.-....
1LE1601-3AC0.-....
1LE1601-3AC2.-....
1LE1601-3AC4.-....
1LE1601-3AC5.-....
1LE1601-3AC6.-....
1000.–
1260.–
1590.–
1960.–
2460.–
3260.–
4510.–
5310.–
6510.–
7530.–
10100.–
12300.–
14000.–
16600.–
22500.–
25400.–
30600.–
36500.–
44200.–
1LE1501-1AD4.-....
1LE1501-1AD5.-....
1LE1501-1BD2.-....
1LE1501-1CD0.-....
1LE1501-1CD2.-....
1LE1501-1DD2.-....
1LE1501-1DD3.-....
1LE1501-1DD4.-....
1LE1501-1ED4.-....
1LE1501-2AD5.-....
1LE1501-2BD0.-....
1LE1501-2BD2.-....
1LE1501-2CD2.-....
1LE1501-2DD0.-....
1LE1501-2DD2.-....
1LE1501-3AD0.-....
1LE1501-3AD2.-....
1LE1501-3AD4.-....
1LE1501-3AD5.-....
1LE1501-3AD6.-....
1020.–
1280.–
1520.–
1970.–
2410.–
2950.–
3630.–
4380.–
5160.–
6810.–
8270.–
9430.–
12200.–
14600.–
17800.–
21100.–
28300.–
31500.–
38000.–
45400.–
1LE1601-1AD4.-....
1LE1601-1AD5.-....
1LE1601-1BD2.-....
1LE1601-1CD0.-....
1LE1601-1CD2.-....
1LE1601-1DD2.-....
1LE1601-1DD3.-....
1LE1601-1DD4.-....
1LE1601-1ED4.-....
1LE1601-2AD5.-....
1LE1601-2BD0.-....
1LE1601-2BD2.-....
1LE1601-2CD2.-....
1LE1601-2DD0.-....
1LE1601-2DD2.-....
1LE1601-3AD0.-....
1LE1601-3AD2.-....
1LE1601-3AD4.-....
1LE1601-3AD5.-....
1LE1601-3AD6.-....
1120.–
1410.–
1680.–
2180.–
2660.–
3390.–
4170.–
5040.–
5680.–
7500.–
9100.–
10400.–
13500.–
15100.–
18400.–
21800.–
29200.–
32500.–
39200.–
46800.–
Siemens D 81.1 P · 03/2015
2/5
2
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors with High Efficiency IE2 (continued)
Series version
2
Cast-iron series 1LE1501/1LE1601
Basic/Performance Line
with increased output
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
100 L ... 280 M
Rated output at 50 Hz
2.2 ... 110 kW
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
13 ... 726 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Article No.
Base
class
size
price
50 Hz
Basic Line
Performance Line price
kW
FS

2-pole: 3000 rpm at 50 Hz
4
IE2
100 L
5.5
IE2
112 M
11
IE2
132 M
22
IE2
160 L
30
IE2
180 M
45
IE2
200 L
55
IE2
225 M
75
IE2
250 M
110
IE2
280 M
4-pole: 1500 rpm at 50 Hz
4
IE2
100 L
5.5
IE2
112 M
11
IE2
132 M
18.5
IE2
160 L
30
IE2
180 M
37
IE2
200 L
55
IE2
225 M
75
IE2
250 M
110
IE2
280 M
6-pole: 1000 rpm at 50 Hz
2.2
IE2
100 L
3
IE2
112 M
7.5
IE2
132 M
15
IE2
160 L
18.5
IE2
180 M
30
IE2
200 L
37
IE2
225 M
45
IE2
250 M
75
IE2
280 M
8-pole: 750 rpm at 50 Hz
15
IE2
180 M
18.5
IE2
200 L
30
IE2
225 M
37
IE2
250 M
55
IE2
280 M
2/6
Siemens D 81.1 P · 03/2015
New
 New
EUR
EUR
1LE1501-1AA6.-.... 1200.–
1LE1501-1BA6.-.... 1500.–
1LE1501-1CA6.-.... 2640.–
1LE1501-1DA6.-.... 4850.–
1LE1501-1EA6.-.... 6080.–
1LE1501-2AA6.-.... 9110.–
1LE1501-2BA6.-.... 10800.–
1LE1501-2CA6.-.... 14800.–
1LE1501-2DA6.-.... 21000.–
1LE1601-1AA6.-....
1LE1601-1BA6.-....
1LE1601-1CA6.-....
1LE1601-1DA6.-....
1LE1601-1EA6.-....
1LE1601-2AA6.-....
1LE1601-2BA6.-....
1LE1601-2CA6.-....
1LE1601-2DA6.-....
1310.–
1660.–
2900.–
5570.–
6680.–
10000.–
11900.–
15200.–
22100.–
1LE1501-1AB6.-.... 1290.–
1LE1501-1BB6.-.... 1620.–
1LE1501-1CB6.-.... 2700.–
1LE1501-1DB6.-.... 4120.–
1LE1501-1EB6.-.... 5990.–
1LE1501-2AB6.-.... 7280.–
1LE1501-2BB6.-.... 10400.–
1LE1501-2CB6.-.... 14000.–
1LE1501-2DB6.-.... 20500.–
1LE1601-1AB6.-.... 1430.–
1LE1601-1BB6.-.... 1780.–
1LE1601-1CB6.-.... 2970.–
1LE1601-1DB6.-.... 4740.–
1LE1601-1EB6.-.... 6590.–
1LE1601-2AB6.-.... 8010.–
1LE1601-2BB6.-.... 11400.–
1LE1601-2CB6.-.... 14400.–
1LE1601-2DB6.-.... 21100.–
1LE1501-1AC6.-.... 1150.–
1LE1501-1BC6.-.... 1450.–
1LE1501-1CC6.-.... 2830.–
1LE1501-1DC6.-.... 5090.–
1LE1501-1EC6.-.... 6030.–
1LE1501-2AC6.-.... 9370.–
1LE1501-2BC6.-.... 11400.–
1LE1501-2CC6.-.... 13900.–
1LE1501-2DC6.-.... 22300.–
1LE1601-1AC6.-....
1LE1601-1BC6.-....
1LE1601-1CC6.-....
1LE1601-1DC6.-....
1LE1601-1EC6.-....
1LE1601-2AC6.-....
1LE1601-2BC6.-....
1LE1601-2CC6.-....
1LE1601-2DC6.-....
1LE1501-1ED6.-.... 6810.–
1LE1501-2AD6.-.... 8270.–
1LE1501-2BD6.-.... 12200.–
1LE1501-2CD6.-.... 14600.–
1LE1501-2DD6.-.... 21100.–
1LE1601-1ED6.-.... 7500.–
1LE1601-2AD6.-.... 9100.–
1LE1601-2BD6.-.... 13500.–
1LE1601-2CD6.-.... 15100.–
1LE1601-2DD6.-.... 21800.–
1260.–
1590.–
3120.–
5850.–
6640.–
10300.–
12500.–
14300.–
23000.–
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with High Efficiency IE2 (continued)
Series version
Aluminum series 1LA9
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
63 M … 200 L
Rated output at 50 Hz
0.12 ... 37 kW
Synchronous speed
1000 ... 3600 rpm
Rated torque at 50 Hz
0.6 ... 215 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS
 Successor 1LE1001 EUR
2-pole: 3000 rpm at 50 Hz
0.18
–
63 M
1LA9060-2KA..
363.–
0.25
–
63 M
1LA9063-2KA..
384.–
0.37
–
71 M
1LA9070-2KA..
389.–
0.55
–
71 M
1LA9073-2KA..
439.–
0.75
IE2
80 M
 1LA9080-2KA..
517.–
1.1
IE2
80 M
 1LA9083-2KA..
591.–
1.5
IE2
90 S
 1LA9090-2KA..
683.–
2.2
IE2
90 L
 1LA9096-2KA..
881.–
3
IE2
100 L  1LA9106-2KA..
1060.–
4
IE2
112 M  1LA9113-2KA..
1240.–
5.5
IE2
132 S  1LA9130-2KA..
1570.–
7.5
IE2
132 S  1LA9131-2KA..
1990.–
11
IE2
160 M  1LA9163-2KA..
2760.–
15
IE2
160 M  1LA9164-2KA..
3610.–
19
IE2
160 L  1LA9166-2KA..
4300.–
22
IE2
180 M
1LA9183-2WA..
4740.–
30
IE2
200 L
1LA9206-2WA..
6150.–
37
IE2
200 L
1LA9207-2WA..
7720.–
4-pole: 1500 rpm at 50 Hz
0.12
–
63 M
1LA9060-4KA..
370.–
0.18
–
63 M
1LA9063-4KA..
399.–
0.25
–
71 M
1LA9070-4KA..
397.–
0.37
–
71 M
1LA9073-4KA..
445.–
0.55
–
80 M
 1LA9080-4KA..
513.–
0.75
IE2
80 M
 1LA9083-4KA..
560.–
1.1
IE2
90 S
 1LA9090-4KA..
662.–
1.5
IE2
90 L
 1LA9096-4KA..
785.–
2.2
IE2
100 L  1LA9106-4KA..
963.–
3
IE2
100 L  1LA9107-4KA..
1110.–
4
IE2
112 M  1LA9113-4KA..
1360.–
5.5
IE2
132 S  1LA9130-4KA..
1690.–
7.5
IE2
132 M  1LA9133-4KA..
2150.–
11
IE2
160 M  1LA9163-4KA..
2820.–
15
IE2
160 L  1LA9166-4KA..
3660.–
18.5
IE2
180 M
1LA9183-4WA..
4040.–
22
IE2
180 L
1LA9186-4WA..
4670.–
30
IE2
200 L
1LA9207-4WA..
6040.–
6-pole: 1000 rpm at 50 Hz
0.8
IE2
90 S
1LA9090-6KA..
649.–
1.1
IE2
90 L
1LA9096-6KA..
805.–
1.5
IE2
100 L  1LA9106-6KA..
951.–
2.2
IE2
112 M  1LA9113-6KA..
1190.–
4
IE2
132 M  1LA9133-6KA..
1860.–
5.5
IE2
132 M  1LA9134-6KA..
2340.–
7.5
IE2
160 M  1LA9163-6KA..
2970.–
11
IE2
160 L  1LA9166-6KA..
4100.–
15
IE2
180 L
1LA9186-6WA..
4970.–
Can be ordered only as
18.5
IE2
200 L
1LA9206-6WA..
6130.–
explosion proof and
22
IE2
200 L
1LA9207-6WA..
7060.–
marine version.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/7
2
© Siemens AG 2015
SIMOTICS SD 1LG Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
2
Motors with High Efficiency IE2 (continued)
Series version
Cast-iron series 1LG6
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
180 L … 315 L
Rated output at 50 Hz
11 ... 315 kW
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
71 ... 2070 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Prated, IE
Frame
Article No.
Base
class
size
price
class
size
price
50 Hz
50 Hz
kW
FS
 New
EUR
kW
FS
 New
EUR
2-pole: 3000 rpm at 50 Hz
8-pole: 750 rpm at 50 Hz
250
IE2
315 L
1LG6318-2MB..
45800.– 11
–
180 L
1LG6186-8AB..
5750.–
315
IE2
315 L
1LG6312-2MA..
57600.– 15
–
200 L
1LG6207-8AB..
7580.–
4-pole: 1500 rpm at 50 Hz
19
–
225 S
1LG6220-8AB..
9200.–
250
IE2
315 L
1LG6318-4MA..
42800.– 22
–
225 M
1LG6223-8AB..
10500.–
315
IE2
315 L
1LG6312-4MA..
54100.– 30
–
250 M
1LG6253-8AB..
13600.–
6-pole: 1000 rpm at 50 Hz
37
–
280 S
1LG6280-8AB..
16300.–
15
IE2
180 L
1LG6186-6AA..
5490.– 45
–
280 M
1LG6283-8AB..
19800.–
19
IE2
200 L
1LG6206-6AA..
6710.– 55
–
315 S
1LG6310-8AB..
23400.–
22
IE2
200 L
1LG6207-6AA..
7780.– 75
–
315 M
1LG6313-8AB..
31500.–
30
IE2
225 M
1LG6223-6AA..
10400.– 90
–
315 L
1LG6316-8AB..
35100.–
37
IE2
250 M
1LG6253-6AA..
12700.– 110
–
315 L
1LG6317-8AB..
42300.–
45
IE2
280 S
1LG6280-6AA..
15500.– 132
–
315 L
1LG6318-8AB..
47200.–
55
IE2
280 M
1LG6283-6AA..
18300.– 160
–
315 L
1LG6312-8MB..
50600.–
75
IE2
315 S
1LG6310-6AA..
24800.–
90
IE2
315 M
1LG6313-6AA..
28000.–
110
IE2
315 L
1LG6316-6AA..
33700.–
132
IE2
315 L
1LG6317-6AA..
40100.–
160
IE2
315 L
1LG6318-6AA..
45600.–
200
IE2
315 L
1LG6312-6MA..
50600.–
Can be ordered only as explosion proof and marine version or as PM version or as
PM version "Converter-fed operation" (see Page 2/44).
2/8
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LG Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with High Efficiency IE2 (continued)
Series version
Cast-iron series 1LG6
with increased output
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
200 L … 280 M
Rated output at 50 Hz
37 ... 110 kW
Synchronous speed
1000 ... 3600 rpm
Rated torque at 50 Hz
145 ... 725 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS
 New
EUR
2-pole: 3000 rpm at 50 Hz
45
IE2
200 L
1LG6208-2AA..
10100.–
55
IE2
225 M
1LG6228-2AA..
12000.–
75
IE2
250 M
1LG6258-2AA..
16500.–
110
IE2
280 M
1LG6288-2AA..
23300.–
4-pole: 1500 rpm at 50 Hz
55
IE2
225 M
1LG6228-4AA..
11600.–
75
IE2
250 M
1LG6258-4AA..
15600.–
110
IE2
280 M
1LG6288-4AA..
22800.–
6-pole: 1000 rpm at 50 Hz
37
IE2
225 M
1LG6228-6AA..
12700.–
45
IE2
250 M
1LG6258-6AA..
15500.–
75
IE2
280 M
1LG6288-6AA..
24800.–
Can be ordered only as explosion proof and marine version or as PM version or as
PM version "Converter-fed operation" (see Page 2/44).
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/9
2
© Siemens AG 2015
SIMOTICS GP 1LE1 Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
2
Motors with Premium Efficiency IE3
Series version
Aluminum series 1LE1003
Cooling
Self-ventilated (IC 411) or with order code F90, forced-air cooled without external fan and fan cover (IC 416)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
80 M ... 160 L
Rated output at 50 Hz
0.37 ... 18.5 kW
Synchronous speed
1000 ... 3600 rpm
Rated torque at 50 Hz
2.5 ... 108 Nm
Efficiency
Premium Efficiency IE3
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS
 New
EUR
2-pole: 3000 rpm at 50 Hz
0.75
IE3
80 M
1LE1003-0DA2.-....
546.–
1.1
IE3
80 M
1LE1003-0DA3.-....
625.–
1.5
IE3
90 S
1LE1003-0EA0.-....
722.–
2.2
IE3
90 L
1LE1003-0EA4.-....
929.–
3
IE3
100 L
1LE1003-1AA4.-.... 1050.–
4
IE3
112 M
1LE1003-1BA2.-.... 1240.–
5.5
IE3
132 S
1LE1003-1CA0.-.... 1560.–
7.5
IE3
132 S
1LE1003-1CA1.-.... 1980.–
11
IE3
160 M
1LE1003-1DA2.-.... 2740.–
15
IE3
160 M
1LE1003-1DA3.-.... 3580.–
18.5
IE3
160 L
1LE1003-1DA4.-.... 4270.–
4-pole: 1500 rpm at 50 Hz
0.55
–
80 M
1LE1003-0DB2.-....
541.–
0.75
IE3
80 M
1LE1003-0DB3.-....
591.–
1.1
IE3
90 S
1LE1003-0EB0.-....
700.–
1.5
IE3
90 L
1LE1003-0EB4.-....
830.–
2.2
IE3
100 L
1LE1003-1AB4.-....
956.–
3
IE3
100 L
1LE1003-1AB5.-.... 1100.–
4
IE3
112 M
1LE1003-1BB2.-.... 1340.–
5.5
IE3
132 S
1LE1003-1CB0.-.... 1690.–
7.5
IE3
132 M
1LE1003-1CB2.-.... 2140.–
11
IE3
160 M
1LE1003-1DB2.-.... 2800.–
15
IE3
160 L
1LE1003-1DB4.-.... 3640.–
6-pole: 1000 rpm at 50 Hz
0.37
–
80 M
1LE1003-0DC2.-....
525.–
0.55
–
80 M
1LE1003-0DC3.-....
607.–
0.75
IE3
90 S
1LE1003-0EC0.-....
686.–
1.1
IE3
90 L
1LE1003-0EC4.-....
850.–
1.5
IE3
100 L
1LE1003-1AC4.-....
945.–
2.2
IE3
112 M
1LE1003-1BC2.-.... 1200.–
3
IE3
132 S
1LE1003-1CC0.-.... 1500.–
4
IE3
132 M
1LE1003-1CC2.-.... 1850.–
5.5
IE3
132 M
1LE1003-1CC3.-.... 2320.–
7.5
IE3
160 M
1LE1003-1DC2.-.... 2950.–
11
IE3
160 L
1LE1003-1DC4.-.... 4070.–
2/10
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with Premium Efficiency IE3 (continued)
Series version
Cast-iron series 1LE1503/1LE1603
Basic/Performance Line
(continued on the next page)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
71 M ... 315 L
Rated output at 50 Hz
0.18 ... 200 kW
Synchronous speed
1000 ... 3600 rpm
Rated torque at 50 Hz
1.2 ... 1542 Nm
Efficiency
Premium Efficiency IE3
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Article No.
Base
class
size
price
50 Hz
Basic Line
Performance Line price
kW
FS

2-pole: 3000 rpm at 50 Hz
0.37
IE3
71 M 
0.55
IE3
71 M 
0.75
IE3
80 M 
1.1
IE3
80 M 
1.5
IE3
90 S

2.2
IE3
90 L

3
IE3
100 L
4
IE3
112 M
5.5
IE3
132 S
7.5
IE3
132 S
11
IE3
160 M
15
IE3
160 M
18.5
IE3
160 L
22
IE3
180 M
30
IE3
200 L
37
IE3
200 L
45
IE3
225 M
55
IE3
250 M
75
IE3
280 S
90
IE3
280 M
110
IE3
315 S
132
IE3
315 M
160
IE3
315 L
200
IE3
315 L
4-pole: 1500 rpm at 50 Hz
0.25
IE3
71 M 
0.37
IE3
71 M 
0.55
IE3
80 M 
0.75
IE3
80 M 
1.1
IE3
90 S

1.5
IE3
90 L

2.2
IE3
100 L
3
IE3
100 L
4
IE3
112 M
5.5
IE3
132 S
7.5
IE3
132 M
11
IE3
160 M
15
IE3
160 L
18.5
IE3
180 M
22
IE3
180 L
30
IE3
200 L
37
IE3
225 S
45
IE3
225 M
55
IE3
250 M
75
IE3
280 S
90
IE3
280 M
110
IE3
315 S
132
IE3
315 M
160
IE3
315 L
200
IE3
315 L
Recommended retail prices plus metal surcharges (MS)
 New
New
EUR
EUR
1LE1503-0CA2.-....
1LE1503-0CA3.-....
1LE1503-0DA2.-....
1LE1503-0DA3.-....
1LE1503-0EA0.-....
1LE1503-0EA4.-....
1LE1503-1AA4.-....
1LE1503-1BA2.-....
1LE1503-1CA0.-....
1LE1503-1CA1.-....
1LE1503-1DA2.-....
1LE1503-1DA3.-....
1LE1503-1DA4.-....
1LE1503-1EA2.-....
1LE1503-2AA4.-....
1LE1503-2AA5.-....
1LE1503-2BA2.-....
1LE1503-2CA2.-....
1LE1503-2DA0.-....
1LE1503-2DA2.-....
1LE1503-3AA0.-....
1LE1503-3AA2.-....
1LE1503-3AA4.-....
1LE1503-3AA5.-....
584.–
685.–
704.–
804.–
928.–
1130.–
1140.–
1350.–
1690.–
2160.–
2970.–
3880.–
4630.–
5170.–
6710.–
8430.–
9800.–
11700.–
16000.–
18900.–
22600.–
27100.–
33700.–
42100.–
1LE1603-1AA4.-....
1LE1603-1BA2.-....
1LE1603-1CA0.-....
1LE1603-1CA1.-....
1LE1603-1DA2.-....
1LE1603-1DA3.-....
1LE1603-1DA4.-....
1LE1603-1EA2.-....
1LE1603-2AA4.-....
1LE1603-2AA5.-....
1LE1603-2BA2.-....
1LE1603-2CA2.-....
1LE1603-2DA0.-....
1LE1603-2DA2.-....
1LE1603-3AA0.-....
1LE1603-3AA2.-....
1LE1603-3AA4.-....
1LE1603-3AA5.-....
1280.–
1530.–
1910.–
2430.–
3360.–
4380.–
5230.–
5630.–
7300.–
9160.–
10700.–
12700.–
16400.–
19700.–
23700.–
28400.–
35300.–
44100.–
1LE1503-0CB2.-....
1LE1503-0CB3.-....
1LE1503-0DB2.-....
1LE1503-0DB3.-....
1LE1503-0EB0.-....
1LE1503-0EB4.-....
1LE1503-1AB4.-....
1LE1503-1AB5.-....
1LE1503-1BB2.-....
1LE1503-1CB0.-....
1LE1503-1CB2.-....
1LE1503-1DB2.-....
1LE1503-1DB4.-....
1LE1503-1EB2.-....
1LE1503-1EB4.-....
1LE1503-2AB5.-....
1LE1503-2BB0.-....
1LE1503-2BB2.-....
1LE1503-2CB2.-....
1LE1503-2DB0.-....
1LE1503-2DB2.-....
1LE1503-3AB0.-....
1LE1503-3AB2.-....
1LE1503-3AB4.-....
1LE1503-3AB5.-....
579.–
648.–
698.–
761.–
900.–
1020.–
1040.–
1200.–
1460.–
1820.–
2320.–
3050.–
3940.–
4390.–
5100.–
6620.–
7850.–
9240.–
11200.–
15100.–
17700.–
22100.–
26200.–
31700.–
39400.–
1LE1603-1AB4.-....
1LE1603-1AB5.-....
1LE1603-1BB2.-....
1LE1603-1CB0.-....
1LE1603-1CB2.-....
1LE1603-1DB2.-....
1LE1603-1DB4.-....
1LE1503-1EB2.-....
1LE1603-1EB4.-....
1LE1603-2AB5.-....
1LE1603-2BB0.-....
1LE1603-2BB2.-....
1LE1603-2CB2.-....
1LE1603-2DB0.-....
1LE1603-2DB2.-....
1LE1603-3AB0.-....
1LE1603-3AB2.-....
1LE1603-3AB4.-....
1LE1603-3AB5.-....
1170.–
1350.–
1650.–
2070.–
2630.–
3440.–
4460.–
4390.–
5550.–
7190.–
8570.–
10100.–
12300.–
15500.–
18200.–
22600.–
27000.–
32500.–
40500.–
Siemens D 81.1 P · 03/2015
2/11
2
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors with Premium Efficiency IE3 (continued)
Series version
2
Cast-iron series 1LE1503/1LE1603
Basic/Performance Line
(continued)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
71 M ... 315 L
Rated output at 50 Hz
0.18 ... 200 kW
Synchronous speed
1000 ... 3600 rpm
Rated torque at 50 Hz
1.2 ... 1542 Nm
Efficiency
Premium Efficiency IE3
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Article No.
Base
class
size
price
50 Hz
Basic Line
Performance Line price
kW
FS
 New
EUR
 New
EUR
6-pole: 1000 rpm at 50 Hz
0.18
IE3
71 M  1LE1503-0CC2.-....
562.–
0.25
IE3
71 M  1LE1503-0CC3.-....
665.–
0.37
IE3
80 M  1LE1503-0DC2.-....
677.–
0.55
IE3
80 M  1LE1503-0DC3.-....
781.–
0.75
IE3
90 S
 1LE1503-0EC0.-....
883.–
1.1
IE3
90 L
 1LE1503-0EC4.-.... 1010.–
1.5
IE3
100 L
1LE1503-1AC4.-.... 1020.–
1LE1603-1AC4.-.... 1160.–
2.2
IE3
112 M
1LE1503-1BC2.-.... 1290.–
1LE1603-1BC2.-.... 1470.–
3
IE3
132 S
1LE1503-1CC0.-.... 1640.–
1LE1603-1CC0.-.... 1850.–
4
IE3
132 M
1LE1503-1CC2.-.... 2010.–
1LE1603-1CC2.-.... 2260.–
5.5
IE3
132 M
1LE1503-1CC3.-.... 2530.–
1LE1603-1CC3.-.... 2850.–
7.5
IE3
160 M
1LE1503-1DC2.-.... 3190.–
1LE1603-1DC2.-.... 3610.–
11
IE3
160 L
1LE1503-1DC4.-.... 4420.–
1LE1603-1DC4.-.... 5000.–
15
IE3
180 L
1LE1503-1EC4.-.... 5450.–
1LE1603-1EC4.-.... 5920.–
18.5
IE3
200 L
1LE1503-2AC4.-.... 6660.–
1LE1603-2AC4.-.... 7240.–
22
IE3
200 L
1LE1503-2AC5.-.... 7710.–
1LE1603-2AC5.-.... 8390.–
30
IE3
225 M
1LE1503-2BC2.-.... 10100.–
1LE1603-2BC2.-.... 11000.–
37
IE3
250 M
1LE1503-2CC2.-.... 12300.–
1LE1603-2CC2.-.... 13400.–
45
IE3
280 S
1LE1503-2DC0.-.... 15000.–
1LE1603-2DC0.-.... 15400.–
55
IE3
280 M
1LE1503-2DC2.-.... 17700.–
1LE1603-2DC2.-.... 18200.–
75
IE3
315 S
1LE1503-3AC0.-.... 24100.–
1LE1603-3AC0.-.... 24700.–
90
IE3
315 M
1LE1503-3AC2.-.... 27100.–
1LE1603-3AC2.-.... 27900.–
110
IE3
315 L
1LE1503-3AC4.-.... 32700.–
1LE1603-3AC4.-.... 33600.–
132
IE3
315 L
1LE1503-3AC5.-.... 38900.–
1LE1603-3AC5.-.... 40000.–
160
IE3
315 L
1LE1503-3AC6.-.... 47200.–
1LE1603-3AC6.-.... 48500.–
2/12
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LG Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with Premium Efficiency IE3 (continued)
Series version
Cast-iron series 1LG6
with order code D25
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
315 S … 315 L
Rated output at 50 Hz
75 ... 315 kW
Synchronous speed
1000 ... 3600 rpm
Rated torque at 50 Hz
352 ... 2022 Nm
Efficiency
Premium Efficiency IE3 with order code D25
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS
 New
EUR
2-pole: 3000 rpm at 50 Hz
110
IE3
315 S
1LG6310-2AB..-Z D25
25420.–
132
IE3
315 M
1LG6313-2AB..-Z D25
30590.–
160
IE3
315 L
1LG6316-2AB..-Z D25
38090.–
200
IE3
315 L
1LG6317-2AB..-Z D25
47510.–
250
IE3
315 L
1LG6318-2MB..-Z D25
50310.–
315
IE3
315 L
1LG6312-2MA..-Z D25
63280.–
4-pole: 1500 rpm at 50 Hz
110
IE3
315 S
1LG6310-4AA..-Z D25
24920.–
132
IE3
315 M
1LG6313-4AA..-Z D25
29590.–
160
IE3
315 L
1LG6316-4AA..-Z D25
35670.–
200
IE3
315 L
1LG6317-4AA..-Z D25
44580.–
250
IE3
315 L
1LG6318-4MA..-Z D25
47020.–
315
IE3
315 L
1LG6312-4MA..-Z D25
59440.–
6-pole: 1000 rpm at 50 Hz
75
IE3
315 S
1LG6310-6AA..-Z D25
27050.–
90
IE3
315 M
1LG6313-6AA..-Z D25
30590.–
110
IE3
315 L
1LG6316-6AA..-Z D25
36770.–
132
IE3
315 L
1LG6317-6AA..-Z D25
43760.–
160
IE3
315 L
1LG6318-6AA..-Z D25
53280.–
200
IE3
315 L
1LG6312-6MA..-Z D25
55600.–
Can be ordered only as explosion proof and marine version or as PM version or as
PM version "Converter-fed operation" (see Page 2/44).
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/13
2
© Siemens AG 2015
SIMOTICS GP 1LE1 Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors with Standard Efficiency IE1
Series version
Aluminum series 1LE1002
Cooling
2
Aluminum series 1LE1002
with increased output
Self-ventilated (IC 411)
Self-ventilated (IC 411) or with order code F90, forced-air
cooled without external fan and fan cover (IC 416)
Degree of protection
IP55, optionally IP56 or IP65
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Thermal class 130 (B)
rve
Number of poles
2, 4, 6, 8
2, 4, 6
bse um
o
ase nim
Frame sizes (FS)
100 L ... 160 L
100 L ... 160 L
Ple al mi cies
Rated output at 50 Hz
0.75 ... 18.5 kW
2.2 ... 22 kW
leg ficien EA!
ef he E
Synchronous speed
750 ... 3600 rpm
1000 ... 3600 rpm
in t
Rated torque at 50 Hz
10 ... 109 Nm
13 ... 148 Nm
Efficiency
Standard Efficiency IE1
Standard Efficiency IE1
Metal factor for metal surcharges (MS) N - W - - - - N-W----Price group (PG)
3Z1
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Prated, IE
Frame
Article No.
Base
class
size
price
class
size
price
50 Hz
50 Hz
kW
FS
EUR
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
3
IE1
100 L
1LE1002-1AA4.-....
689.– 4
IE1
100 L
1LE1002-1AA6.-....
849.–
4
IE1
112 M
1LE1002-1BA2.-....
849.– 5.5
IE1
112 M
1LE1002-1BA6.-.... 1090.–
5.5
IE1
132 S
1LE1002-1CA0.-.... 1090.–
7.5
IE1
132 S
1LE1002-1CA1.-.... 1400.–
11
IE1
132 M
1LE1002-1CA6.-.... 1950.–
11
IE1
160 M
1LE1002-1DA2.-.... 1950.–
15
IE1
160 M
1LE1002-1DA3.-.... 2540.–
18.5
IE1
160 L
1LE1002-1DA4.-.... 3040.– 22
IE1
160 L
1LE1002-1DA6.-.... 3580.–
4-pole: 1500 rpm at 50 Hz
2.2
IE1
100 L
1LE1002-1AB4.-....
606.– 4
IE1
100 L
1LE1002-1AB6.-....
887.–
3
IE1
100 L
1LE1002-1AB5.-....
697.–
4
IE1
112 M
1LE1002-1BB2.-....
887.– 5.5
IE1
112 M
1LE1002-1BB6.-.... 1140.–
5.5
IE1
132 S
1LE1002-1CB0.-.... 1140.–
7.5
IE1
132 M
1LE1002-1CB2.-.... 1460.– 11
IE1
132 M
1LE1002-1CB6.-.... 1990.–
11
IE1
160 M
1LE1002-1DB2.-.... 1990.–
15
IE1
160 L
1LE1002-1DB4.-.... 2590.– 18.5
IE1
160 L
1LE1002-1DB6.-.... 3120.–
6-pole: 1000 rpm at 50 Hz
1.5
IE1
100 L
1LE1002-1AC4.-....
645.– 2.2
IE1
100 L
1LE1002-1AC6.-....
808.–
2.2
IE1
112 M
1LE1002-1BC2.-....
808.– 3
IE1
112 M
1LE1002-1BC6.-.... 1020.–
3
IE1
132 S
1LE1002-1CC0.-.... 1020.–
4
IE1
132 M
1LE1002-1CC2.-.... 1270.– 7.5
IE1
132 M
1LE1002-1CC6.-.... 2090.–
5.5
IE1
132 M
1LE1002-1CC3.-.... 1610.–
7.5
IE1
160 M
1LE1002-1DC2.-.... 2090.–
11
IE1
160 L
1LE1002-1DC4.-.... 2890.– 15
IE1
160 L
1LE1002-1DC6.-.... 3750.–
8-pole: 750 rpm at 50 Hz
0.75
–
100 L
1LE1002-1AD4.-....
670.–
1.1
–
100 L
1LE1002-1AD5.-....
849.–
1.5
–
112 M
1LE1002-1BD2.-.... 1010.–
2.2
–
132 S
1LE1002-1CD0.-.... 1300.–
3
–
132 M
1LE1002-1CD2.-.... 1590.–
4
–
160 M
1LE1002-1DD2.-.... 1950.–
5.5
–
160 M
1LE1002-1DD3.-.... 2420.–
7.5
–
160 L
1LE1002-1DD4.-.... 2990.–
2/14
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1PC1 Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with Standard Efficiency IE1 (continued)
Series version
Aluminum series 1PC1002 1)
Cooling
Naturally cooled without external fan (IC 410)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
ve
ser
Number of poles
2, 4, 6, 8
ob um
e
m
s
a
ni
Frame sizes (FS)
100 L ... 160 L
Ple al mi cies
Rated output at 50 Hz
0.3 ... 7.4 kW
leg ficien EA!
ef he E
Synchronous speed
750 ... 3600 rpm
in t
1)
Rated torque at 50 Hz
On request
Efficiency
On request 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
1.2
O. R.
100 L
1PC1002-1AA4.-....
879.–
1.6
O. R.
112 M
1PC1002-1BA2.-.... 1040.–
2.2
O. R.
132 S
1PC1002-1CA0.-.... 1330.–
3
O. R.
132 S
1PC1002-1CA1.-.... 1630.–
4.4
O. R.
160 M
6
O. R.
160 M
7.4
O. R.
160 L
4-pole: 1500 rpm at 50 Hz
0.88
O. R.
100 L
1.2
O. R.
100 L
1.6
O. R.
112 M
2.2
O. R.
132 S
3
O. R.
132 M
4.4
O. R.
160 M
6
O. R.
160 L
6-pole: 1000 rpm at 50 Hz
0.6
O. R.
100 L
0.88
O. R.
112 M
1.2
O. R.
132 S
1.6
O. R.
132 M
2.2
O. R.
132 M
3
O. R.
160 M
4.4
O. R.
160 L
8-pole: 750 rpm at 50 Hz
0.3
–
100 L
0.44
–
100 L
0.6
–
112 M
0.88
–
132 S
1.2
–
132 M
1.6
–
160 M
2.2
–
160 M
3
–
160 L
1)
1PC1002-1DA2.-....
1PC1002-1DA3.-....
1PC1002-1DA4.-....
2130.–
2660.–
3120.–
1PC1002-1AB4.-....
1PC1002-1AB5.-....
1PC1002-1BB2.-....
1PC1002-1CB0.-....
1PC1002-1CB2.-....
1PC1002-1DB2.-....
1PC1002-1DB4.-....
787.–
897.–
1090.–
1370.–
1660.–
2160.–
2760.–
1PC1002-1AC4.-....
1PC1002-1BC2.-....
1PC1002-1CC0.-....
1PC1002-1CC2.-....
1PC1002-1CC3.-....
1PC1002-1DC2.-....
1PC1002-1DC4.-....
824.–
995.–
1260.–
1520.–
1870.–
2300.–
2960.–
1PC1002-1AD4.-....
1PC1002-1AD5.-....
1PC1002-1BD2.-....
1PC1002-1CD0.-....
1PC1002-1CD2.-....
1PC1002-1DD2.-....
1PC1002-1DD3.-....
1PC1002-1DD4.-....
866.–
1040.–
1220.–
1560.–
1810.–
2110.–
2520.–
3010.–
The rated outputs and weights may change slightly after they have been checked. Further electrical data can be calculated and supplied on receipt of order.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/15
2
© Siemens AG 2015
SIMOTICS GP 1LA Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
2
Motors with Standard Efficiency IE1 (continued)
Series version
Aluminum series 1LA7 and 1LA5
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
ve
ser
Number of poles
2, 4, 6, 8
ob um
e
as
nim
Frame sizes (FS)
63 M … 225 M
Ple al mi cies
leg ficien EA!
Rated output at 50 Hz
0.09 ... 45 kW
ef he E
Synchronous speed
750 ... 3600 rpm
in t
Rated torque at 50 Hz
0.6 ... 293 Nm
Efficiency
Standard Efficiency IE1
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Prated, IE
Frame
Article No.
Base
class
size
price
class
size
price
50 Hz
50 Hz
kW
FS
 Successor
EUR
kW
FS
 Successor
EUR
1LE1002
1LE1002
2-pole: 3000 rpm at 50 Hz
6-pole: 1000 rpm at 50 Hz
0.18
–
63 M
1LA7060-2AA..
269.– 0.09
–
63 M
1LA7063-6AB..
286.–
0.25
–
63 M
1LA7063-2AA..
285.– 0.18
–
71 M
1LA7070-6AA..
303.–
0.37
–
71 M
1LA7070-2AA..
289.– 0.25
–
71 M
1LA7073-6AA..
338.–
0.55
–
71 M
1LA7073-2AA..
324.– 0.37
–
80 M
1LA7080-6AA..
357.–
0.75
IE1
80 M
1LA7080-2AA..
357.– 0.55
–
80 M
1LA7083-6AA..
413.–
1.1
IE1
80 M
1LA7083-2AA..
410.– 0.75
IE1
90 S
1LA7090-6AA..
467.–
1.5
IE1
90 S
1LA7090-2AA..
473.– 1.1
IE1
90 L
1LA7096-6AA..
578.–
2.2
IE1
90 L
1LA7096-2AA..
608.– 1.5
IE1
100 L  1LA7106-6AA..
753.–
3
IE1
100 L  1LA7106-2AA..
804.– 2.2
IE1
112 M  1LA7113-6AA..
942.–
4
IE1
112 M  1LA7113-2AA..
991.– 3
IE1
132 S  1LA7130-6AA..
1190.–
5.5
IE1
132 S  1LA7130-2AA..
1270.– 4
IE1
132 M  1LA7133-6AA..
1490.–
7.5
IE1
132 S  1LA7131-2AA..
1630.– 5.5
IE1
132 M  1LA7134-6AA..
1870.–
11
IE1
160 M  1LA7163-2AA..
2280.– 7.5
IE1
160 M  1LA7163-6AA..
2430.–
15
IE1
160 M  1LA7164-2AA..
2960.– 11
IE1
160 L  1LA7166-6AA..
3380.–
18.5
IE1
160 L  1LA7166-2AA..
3550.– 15
IE1
180 L
1LA5186-6AA..
3980.–
22
IE1
180 M
1LA5183-2AA..
3800.– 18.5
IE1
200 L
1LA5206-6AA..
4900.–
30
IE1
200 L
1LA5206-2AA..
4920.– 22
IE1
200 L
1LA5207-6AA..
5740.–
37
IE1
200 L
1LA5207-2AA..
6430.– 30
IE1
225 M
1LA5223-6AA..
7900.–
45
IE1
225 M
1LA5223-2AA..
7810.– 8-pole: 750 rpm at 50 Hz
4-pole: 1500 rpm at 50 Hz
0.09
–
71 M
1LA7070-8AB..
319.–
0.12
–
63 M
1LA7060-4AB..
264.– 0.12
–
71 M
1LA7073-8AB..
359.–
0.18
–
63 M
1LA7063-4AB..
285.– 0.18
–
80 M
1LA7080-8AB..
365.–
0.25
–
71 M
1LA7070-4AB..
286.– 0.25
–
80 M
1LA7083-8AB..
452.–
0.37
–
71 M
1LA7073-4AB..
318.– 0.37
–
90 S
1LA7090-8AB..
532.–
0.55
–
80 M
1LA7080-4AA..
342.– 0.55
–
90 L
1LA7096-8AB..
647.–
0.75
IE1
80 M
1LA7083-4AA..
373.– 0.75
–
100 L  1LA7106-8AB..
782.–
1.1
IE1
90 S
1LA7090-4AA..
443.– 1.1
–
100 L  1LA7107-8AB..
991.–
1.5
IE1
90 L
1LA7096-4AA..
524.– 1.5
–
112 M  1LA7113-8AB..
1180.–
2.2
IE1
100 L  1LA7106-4AA..
707.– 2.2
–
132 S  1LA7130-8AB..
1520.–
3
IE1
100 L  1LA7107-4AA..
813.– 3
–
132 M  1LA7133-8AB..
1850.–
4
IE1
112 M  1LA7113-4AA..
1040.– 4
–
160 M  1LA7163-8AB..
2280.–
5.5
IE1
132 S  1LA7130-4AA..
1330.– 5.5
–
160 M  1LA7164-8AB..
2830.–
7.5
IE1
132 M  1LA7133-4AA..
1710.– 7.5
–
160 L  1LA7166-8AB..
3490.–
11
IE1
160 M  1LA7163-4AA..
2320.– 11
–
180 L
1LA5186-8AB..
4180.–
15
IE1
160 L  1LA7166-4AA..
3020.– 15
–
200 L
1LA5207-8AB..
5510.–
18.5
IE1
180 M
1LA5183-4AA..
3310.– 18.5
–
225 S
1LA5220-8AB..
6690.–
22
IE1
180 L
1LA5186-4AA..
3900.– 22
–
225 M
1LA5223-8AB..
7760.–
30
IE1
200 L
1LA5207-4AA..
5170.–
37
IE1
225 S
1LA5220-4AA..
6300.–
45
IE1
225 M
1LA5223-4AA..
7600.–
Can be ordered only as explosion proof and marine version.
2/16
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with Standard Efficiency IE1 (continued)
Series version
Aluminum series 1LA9
with increased output
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
ve
ser
Number of poles
2, 4
ob um
e
as
nim
Frame sizes (FS)
63 M … 200 L
Ple al mi cies
Rated output at 50 Hz
0.21 ... 53 kW
leg ficien EA!
ef he E
Synchronous speed
1500 ... 3600 rpm
in t
Rated torque at 50 Hz
1.1 ... 280 Nm
Efficiency
Standard Efficiency
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS
 Successor
EUR
1LE1001
2-pole: 3000 rpm at 50 Hz
0.33
–
63 M
1LA9060-2LA..
293.–
0.45
–
63 M
1LA9063-2LA..
310.–
0.65
–
71 M
1LA9070-2LA..
343.–
0.94
–
71 M
1LA9073-2LA..
392.–
1.5
–
80 M
1LA9080-2LA..
468.–
1.75
–
80 M
1LA9083-2LA..
532.–
3
–
90 S
1LA9090-2LA..
706.–
3.8
–
90 L
1LA9096-2LA..
832.–
33
–
180 M
1LA9183-2AA..
5240.–
44
–
200 L
1LA9206-2AA..
7130.–
53
–
200 L
1LA9207-2AA..
8670.–
4-pole: 1500 rpm at 50 Hz
0.21
–
63 M
1LA9060-4LA..
293.–
0.29
–
63 M
1LA9063-4LA..
310.–
0.45
–
71 M
1LA9070-4LA..
343.–
0.6
–
71 M
1LA9073-4LA..
366.–
0.9
–
80 M
1LA9080-4LA..
403.–
1.25
–
80 M
1LA9083-4LA..
488.–
1.8
–
90 S
1LA9090-4LA..
573.–
2.5
–
90 L
1LA9096-4LA..
663.–
26
–
180 M
1LA9183-4AA..
4340.–
32
–
180 L
1LA9186-4AA..
5120.–
43
–
200 L
1LA9207-4AA..
6660.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/17
2
© Siemens AG 2015
SIMOTICS GP 1PP Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
2
Motors with Standard Efficiency IE1 (continued)
Series version
Aluminum series 1PP7 and 1PP5
Cooling
Forced-air cooled without external fan and fan cover (IC 416)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
rve
Number of poles
2, 4, 6, 8
bse
e o imum
s
a
n
Frame sizes (FS)
63 M … 200 L
Ple al mi cies
Rated output at 50 Hz
0.09 ... 37 kW
leg ficien EA!
f
e he E
Synchronous speed
750 ... 3600 rpm
in t
Rated torque at 50 Hz
0.6 ... 215 Nm
Efficiency
Standard Efficiency IE1
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Prated, IE
Frame
Article No.
Base
class
size
price
class
size
price
50 Hz
50 Hz
kW
FS
 Successor
EUR
kW
FS
 Successor
EUR
1LE1002 with
1LE1002 with
order code F90
order code F90
2-pole: 3000 rpm at 50 Hz
6-pole: 1000 rpm at 50 Hz
0.18
–
63 M
1PP7060-2AA..
437.– 0.09
–
63 M
1PP7063-6AA..
452.–
0.25
–
63 M
1PP7063-2AA..
450.– 0.18
–
71 M
1PP7070-6AA..
458.–
0.37
–
71 M
1PP7070-2AA..
441.– 0.25
–
71 M
1PP7073-6AA..
486.–
0.55
–
71 M
1PP7073-2AA..
472.– 0.37
–
80 M
1PP7080-6AA..
493.–
0.75
IE1
80 M
1PP7080-2AA..
493.– 0.55
–
80 M
1PP7083-6AA..
551.–
1.1
IE1
80 M
1PP7083-2AA..
548.– 0.75
IE1
90 S
1PP7090-6AA..
572.–
1.5
IE1
90 S
1PP7090-2AA..
574.– 1.1
IE1
90 L
1PP7096-6AA..
675.–
2.2
IE1
90 L
1PP7096-2AA..
707.– 1.5
IE1
100 L  1PP7106-6AA..
836.–
3
IE1
100 L  1PP7106-2AA..
884.– 2.2
IE1
112 M  1PP7113-6AA..
989.–
4
IE1
112 M  1PP7113-2AA..
1030.– 3
IE1
132 S  1PP7130-6AA..
1230.–
5.5
IE1
132 S  1PP7130-2AA..
1320.– 4
IE1
132 M  1PP7133-6AA..
1520.–
7.5
IE1
132 S  1PP7131-2AA..
1690.– 5.5
IE1
132 M  1PP7134-6AA..
1900.–
11
IE1
160 M  1PP7163-2AA..
2230.– 7.5
IE1
160 M  1PP7163-6AA..
2380.–
15
IE1
160 M  1PP7164-2AA..
2770.– 11
IE1
160 L  1PP7166-6AA..
3100.–
18.5
IE1
160 L  1PP7166-2AA..
3260.– 15
IE1
180 L
1PP5186-6AA..
3980.–
22
IE1
180 M
1PP5183-2AA..
3810.– 18.5
IE1
200 L
1PP5206-6AA..
4900.–
30
IE1
200 L
1PP5206-2AA..
4920.– 22
IE1
200 L
1PP5207-6AA..
5740.–
37
IE1
200 L
1PP5207-2AA..
6430.– 8-pole: 750 rpm at 50 Hz
4-pole: 1500 rpm at 50 Hz
0.09
–
71 M
1PP7070-8AB..
472.–
0.12
–
63 M
1PP7060-4AB..
434.– 0.12
–
71 M
1PP7073-8AB..
509.–
0.18
–
63 M
1PP7063-4AB..
450.– 0.18
–
80 M
1PP7080-8AB..
509.–
0.25
–
71 M
1PP7070-4AB..
439.– 0.25
–
80 M
1PP7083-8AB..
596.–
0.37
–
71 M
1PP7073-4AB..
468.– 0.37
–
90 S
1PP7090-8AB..
633.–
0.55
–
80 M
1PP7080-4AA..
483.– 0.55
–
90 L
1PP7096-8AB..
742.–
0.75
IE1
80 M
1PP7083-4AA..
514.– 0.75
–
100 L  1PP7106-8AB..
869.–
1.1
IE1
90 S
1PP7090-4AA..
537.– 1.1
–
100 L  1PP7107-8AB..
1090.–
1.5
IE1
90 L
1PP7096-4AA..
620.– 1.5
–
112 M  1PP7113-8AB..
1220.–
2.2
IE1
100 L  1PP7106-4AA..
788.– 2.2
–
132 S  1PP7130-8AB..
1550.–
3
IE1
100 L  1PP7107-4AA..
908.– 3
–
132 M  1PP7133-8AB..
1850.–
4
IE1
112 M  1PP7113-4AA..
1090.– 4
–
160 M  1PP7163-8AB..
2160.–
5.5
IE1
132 S  1PP7130-4AA..
1370.– 5.5
–
160 M  1PP7164-8AB..
2600.–
7.5
IE1
132 M  1PP7133-4AA..
1730.– 7.5
–
160 L  1PP7166-8AB..
3140.–
11
IE1
160 M  1PP7163-4AA..
2260.– 11
–
180 L
1PP5186-8AB..
4190.–
15
IE1
160 L  1PP7166-4AA..
2850.– 15
–
200 L
1PP5207-8AB..
5510.–
18.5
IE1
180 M
1PP5183-4AA..
3310.–
22
IE1
180 L
1PP5186-4AA..
3900.–
30
IE1
200 L
1PP5207-4AA..
5160.–
Can be ordered only as marine version.
2/18
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LP Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with Standard Efficiency IE1 (continued)
Series version
Aluminum series 1LP7 and 1LP5 1)
Cooling
Naturally cooled without external fan (IC 410)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
ve
ser
Number of poles
2, 4, 6, 8
ob um
e
as
nim
Frame sizes (FS)
63 M … 200 L
Ple al mi cies
leg ficien EA!
Rated output at 50 Hz
0.045 ... 16.5 kW
ef he E
Synchronous speed
750 ... 3600 rpm
in t
1)
Rated torque at 50 Hz
On request
Efficiency
On request 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Prated, IE
Frame
Article No.
Base
class
size
price
class
size
price
50 Hz
50 Hz
kW
FS
 Successor
EUR
kW
FS
 Successor
EUR
1PC1002
1PC1002
2-pole: 3000 rpm at 50 Hz
6-pole: 1000 rpm at 50 Hz
0.12
O. R.
63 M
1LP7060-2AA..
475.– 0.045 O. R.
63 M
1LP7063-6AA..
492.–
0.16
O. R.
63 M
1LP7063-2AA..
487.– 0.09
O. R.
71 M
1LP7070-6AA..
495.–
0.19
O. R.
71 M
1LP7070-2AA..
482.– 0.13
O. R.
71 M
1LP7073-6AA..
532.–
0.27
O. R.
71 M
1LP7073-2AA..
511.– 0.18
O. R.
80 M
1LP7080-6AA..
548.–
0.35
O. R.
80 M
1LP7080-2AA..
548.– 0.27
O. R.
80 M
1LP7083-6AA..
601.–
0.55
O. R.
80 M
1LP7083-2AA..
601.– 0.37
O. R.
90 S
1LP7090-6AA..
650.–
0.82
O. R.
90 S
1LP7090-2AA..
662.– 0.5
O. R.
90 L
1LP7096-6AA..
764.–
1.1
O. R.
90 L
1LP7096-2AA..
796.– 0.7
O. R.
100 L  1LP7106-6AA..
942.–
1.3
O. R.
100 L  1LP7106-2AA..
1010.– 1
O. R.
112 M  1LP7113-6AA..
1130.–
1.8
O. R.
112 M  1LP7113-2AA..
1190.– 1.7
O. R.
132 S  1LP7130-6AA..
1450.–
2.5
O. R.
132 S  1LP7130-2AA..
1520.– 2
O. R.
132 M  1LP7133-6AA..
1740.–
3.4
O. R.
132 S  1LP7131-2AA..
1860.– 2.3
O. R.
132 M  1LP7134-6AA..
2140.–
5
O. R.
160 M  1LP7163-2AA..
2430.– 3.3
O. R.
160 M  1LP7163-6AA..
2630.–
6
O. R.
160 M  1LP7164-2AA..
3050.– 4
O. R.
160 L  1LP7166-6AA..
3390.–
7
O. R.
160 L  1LP7166-2AA..
3570.– 6.5
O. R.
180 L
1LP5186-6AA..
3350.–
10
O. R.
180 M
1LP5183-2AA..
3640.– 8.5
O. R.
200 L
1LP5207-6AA..
4940.–
13.5
O. R.
200 L
1LP5206-2AA..
4910.– 8-pole: 750 rpm at 50 Hz
16.5
O. R.
200 L
1LP5207-2AA..
5790.– 0.045 O. R.
71 M
1LP7070-8AB..
511.–
4-pole: 1500 rpm at 50 Hz
0.06
O. R.
71 M
1LP7073-8AB..
551.–
0.07
O. R.
63 M
1LP7060-4AB..
472.– 0.09
O. R.
80 M
1LP7080-8AB..
555.–
0.12
O. R.
63 M
1LP7063-4AB..
487.– 0.13
O. R.
80 M
1LP7083-8AB..
645.–
0.13
O. R.
71 M
1LP7070-4AB..
472.– 0.25
O. R.
90 S
1LP7090-8AB..
716.–
0.19
O. R.
71 M
1LP7073-4AB..
503.– 0.35
O. R.
90 L
1LP7096-8AB..
824.–
0.22
O. R.
80 M
1LP7080-4AA..
539.– 0.45
O. R.
100 L  1LP7106-8AB..
991.–
0.38
O. R.
80 M
1LP7083-4AA..
558.– 0.65
O. R.
100 L  1LP7107-8AB..
1190.–
0.55
O. R.
90 S
1LP7090-4AA..
620.– 0.8
O. R.
112 M  1LP7113-8AB..
1390.–
0.65
O. R.
90 L
1LP7096-4AA..
707.– 1.2
O. R.
132 S  1LP7130-8AB..
1790.–
0.88
O. R.
100 L  1LP7106-4AA..
901.– 1.45
O. R.
132 M  1LP7133-8AB..
2070.–
1.2
O. R.
100 L  1LP7107-4AA..
1030.– 1.8
O. R.
160 M  1LP7163-8AB..
2410.–
1.6
O. R.
112 M  1LP7113-4AA..
1250.– 2.4
O. R.
160 M  1LP7164-8AB..
2880.–
2.5
O. R.
132 S  1LP7130-4AA..
1570.– 3
O. R.
160 L  1LP7166-8AB..
3440.–
3.1
O. R.
132 M  1LP7133-4AA..
1900.– 5.5
O. R.
180 L
1LP5186-8AB..
3560.–
4.8
O. R.
160 M  1LP7163-4AA..
2480.– 7.5
O. R.
200 L
1LP5207-8AB..
4970.–
5.4
O. R.
160 L  1LP7166-4AA..
3160.–
7.5
O. R.
180 M
1LP5183-4AA..
3000.–
9
O. R.
180 L
1LP5186-4AA..
3320.–
9
O. R.
200 L
1LP5207-4AA..
4540.–
Can be ordered only as marine version.
1)
The rated outputs and weights may change slightly after they have been checked. Further electrical data can be calculated and supplied on receipt of order.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/19
2
© Siemens AG 2015
SIMOTICS SD 1LA/1LG Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
2
Motors with Standard Efficiency IE1 (continued)
Series version
Cast-iron series 1LA6 and 1LG4
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
ve
ser
Number of poles
2, 4, 6, 8
ob um
e
as
nim
Frame sizes (FS)
100 L … 315 L
Ple al mi cies
leg ficien EA!
Rated output at 50 Hz
0.75 ... 200 kW
ef he E
Synchronous speed
750 ... 3600 rpm
in t
Rated torque at 50 Hz
9.9 ... 1708 Nm
Efficiency
Standard Efficiency IE1
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Prated, IE
Frame
Article No.
Base
class
size
price
class
size
price
50 Hz
50 Hz
kW
FS
EUR
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
6-pole: 1000 rpm at 50 Hz
3
IE1
100 L
1LA6106-2AA..
852.– 1.5
IE1
100 L
1LA6106-6AA..
795.–
4
IE1
112 M
1LA6113-2AA..
1050.– 2.2
IE1
112 M
1LA6113-6AA..
993.–
5.5
IE1
132 S
1LA6130-2AA..
1300.– 3
IE1
132 S
1LA6130-6AA..
1240.–
7.5
IE1
132 S
1LA6131-2AA..
1680.– 4
IE1
132 M
1LA6133-6AA..
1530.–
11
IE1
160 M
1LA6163-2AA..
2250.– 5.5
IE1
132 M
1LA6134-6AA..
1930.–
15
IE1
160 M
1LA6164-2AA..
2970.– 7.5
IE1
160 M
1LA6163-6AA..
2460.–
18.5
IE1
160 L
1LA6166-2AA..
3570.– 11
IE1
160 L
1LA6166-6AA..
3390.–
22
IE1
180 M
1LG4183-2AA..
4050.– 15
IE1
180 L
1LG4186-6AA..
4260.–
30
IE1
200 L
1LG4206-2AA..
5250.– 18.5
IE1
200 L
1LG4206-6AA..
5220.–
37
IE1
200 L
1LG4207-2AA..
6870.– 22
IE1
200 L
1LG4207-6AA..
6150.–
45
IE1
225 M
1LG4223-2AA..
8350.– 30
IE1
225 M
1LG4223-6AA..
8440.–
55
IE1
250 M
1LG4253-2AB..
10200.– 37
IE1
250 M
1LG4253-6AA..
10200.–
75
IE1
280 S
1LG4280-2AB..
13900.– 45
IE1
280 S
1LG4280-6AA..
12600.–
90
IE1
280 M
1LG4283-2AB..
17000.– 55
IE1
280 M
1LG4283-6AA..
15200.–
110
IE1
315 S
1LG4310-2AB..
20700.– 75
IE1
315 S
1LG4310-6AA..
20700.–
132
IE1
315 M
1LG4313-2AB..
24800.– 90
IE1
315 M
1LG4313-6AA..
24800.–
160
IE1
315 L
1LG4316-2AB..
30700.– 110
IE1
315 L
1LG4316-6AA..
29800.–
200
IE1
315 L
1LG4317-2AB..
38400.– 132
IE1
315 L
1LG4317-6AA..
35400.–
4-pole: 1500 rpm at 50 Hz
160
IE1
315 L
1LG4318-6AA..
43000.–
2.2
IE1
100 L
1LA6106-4AA..
746.– 8-pole: 750 rpm at 50 Hz
3
IE1
100 L
1LA6107-4AA..
860.– 0.75
–
100 L
1LA6106-8AB..
824.–
4
IE1
112 M
1LA6113-4AA..
1100.– 1.1
–
100 L
1LA6107-8AB..
1050.–
5.5
IE1
132 S
1LA6130-4AA..
1360.– 1.5
–
112 M
1LA6113-8AB..
1250.–
7.5
IE1
132 M
1LA6133-4AA..
1730.– 2.2
–
132 S
1LA6130-8AB..
1580.–
11
IE1
160 M
1LA6163-4AA..
2350.– 3
–
132 M
1LA6133-8AB..
1900.–
15
IE1
160 L
1LA6166-4AA..
3040.– 4
–
160 M
1LA6163-8AB..
2250.–
18.5
IE1
180 M
1LG4183-4AA..
3530.– 5.5
–
160 M
1LA6164-8AB..
2840.–
22
IE1
180 L
1LG4186-4AA..
4160.– 7.5
–
160 L
1LA6166-8AB..
3550.–
30
IE1
200 L
1LG4207-4AA..
5520.– 11
–
180 L
1LG4186-8AB..
4470.–
37
IE1
225 S
1LG4220-4AA..
6730.– 15
–
200 L
1LG4207-8AB..
5900.–
45
IE1
225 M
1LG4223-4AA..
8130.– 18.5
–
225 S
1LG4220-8AB..
7140.–
55
IE1
250 M
1LG4253-4AA..
9880.– 22
–
225 M
1LG4223-8AB..
8300.–
75
IE1
280 S
1LG4280-4AA..
13500.– 30
–
250 M
1LG4253-8AB..
10900.–
90
IE1
280 M
1LG4283-4AA..
15900.– 37
–
280 S
1LG4280-8AB..
13200.–
110
IE1
315 S
1LG4310-4AA..
19800.– 45
–
280 M
1LG4283-8AB..
16000.–
132
IE1
315 M
1LG4313-4AA..
23400.– 55
–
315 S
1LG4310-8AB..
19600.–
160
IE1
315 L
1LG4316-4AA..
28900.– 75
–
315 M
1LG4313-8AB..
26200.–
200
IE1
315 L
1LG4317-4AA..
35900.– 90
–
315 L
1LG4316-8AB..
30900.–
110
–
315 L
1LG4317-8AB..
37300.–
132
–
315 L
1LG4318-8AB..
44700.–
2/20
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LG Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with Standard Efficiency IE1 (continued)
Series version
Cast-iron series 1LG4
with increased output
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
ve
ser
Number of poles
2, 4, 6, 8
ob um
e
as
nim
Frame sizes (FS)
180 L … 280 M
Ple al mi cies
Rated output at 50 Hz
15 ... 110 kW
leg ficien EA!
ef he E
Synchronous speed
750 ... 3600 rpm
in t
Rated torque at 50 Hz
97 ... 727 Nm
Efficiency
Standard Efficiency IE1
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
30
IE1
180 L
1LG4188-2AA..
5080.–
45
IE1
200 L
1LG4208-2AA..
7620.–
55
IE1
225 M
1LG4228-2AA..
9270.–
75
IE1
250 M
1LG4258-2AA..
12100.–
110
IE1
280 M
1LG4288-2AB..
18700.–
4-pole: 1500 rpm at 50 Hz
30
IE1
180 L
1LG4188-4AA..
5140.–
37
IE1
200 L
1LG4208-4AA..
6140.–
55
IE1
225 M
1LG4228-4AA..
9000.–
75
IE1
250 M
1LG4258-4AA..
11600.–
110
IE1
280 M
1LG4288-4AA..
17800.–
6-pole: 1000 rpm at 50 Hz
18.5
IE1
180 L
1LG4188-6AA..
5180.–
30
IE1
200 L
1LG4208-6AA..
7310.–
37
IE1
225 M
1LG4228-6AA..
9350.–
45
IE1
250 M
1LG4258-6AA..
11400.–
75
IE1
280 M
1LG4288-6AA..
18000.–
8-pole: 750 rpm at 50 Hz
15
–
180 L
1LG4188-8AB..
5500.–
18.5
–
200 L
1LG4208-8AB..
6500.–
30
–
225 M
1LG4228-8AB..
9650.–
37
–
250 M
1LG4258-8AB..
12100.–
55
–
280 M
1LG4288-8AB..
17800.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/21
2
© Siemens AG 2015
SIMOTICS SD 1PP Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
2
Category
Motors with Standard Efficiency IE1 (continued)
Series version
Cast-iron series 1PP4
Cast-iron series 1PP4
with increased output
Cooling
Forced-air cooled without external fan and fan cover (IC 416) Forced-air cooled without external fan and fan cover (IC 416)
Degree of protection
IP55, optionally IP56 or IP65
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Thermal class 130 (B)
ve
rve
ser
Number of poles
2, 4, 6, 8
2, 4, 6, 8
bse um
o
ob um
e
e
m
m
s
s
i
i
a
a
n
n
Frame sizes (FS)
180 M … 315 L
180 L … 315 L
Ple al mi cies
Ple al mi cies
Rated output at 50 Hz
11 ... 200 kW
15 ... 160 kW
leg ficien EA!
leg ficien EA!
f
f
e he E
e he E
Synchronous speed
750 ... 3600 rpm
750 ... 3600 rpm
in t
in t
Rated torque at 50 Hz
71 ... 1423 Nm
97 ... 1708 Nm
Efficiency
Standard Efficiency IE1
Standard Efficiency IE1
Metal factor for metal surcharges (MS) N - W - - - - N-W----Price group (PG)
3Z1
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Prated, IE
Frame
Article No.
Base
class
size
price
class
size
price
50 Hz
50 Hz
kW
FS
EUR
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
2-pole: 3000 rpm at 50 Hz
22
IE1
180 M
1PP4183-2FA..
4180.– 30
IE1
180 L
1PP4188-2FA..
5220.–
30
IE1
200 L
1PP4206-2FA..
5400.– 45
IE1
200 L
1PP4208-2FA..
7840.–
37
IE1
200 L
1PP4207-2FA..
7070.– 55
IE1
225 M
1PP4228-2FA..
9530.–
45
IE1
225 M
1PP4223-2FA..
8590.– 75
IE1
250 M
1PP4258-2FA..
12400.–
55
IE1
250 M
1PP4253-2FB..
10500.– 110
IE1
280 M
1PP4288-2FB..
19400.–
75
IE1
280 S
1PP4280-2FB..
14300.– 4-pole: 1500 rpm at 50 Hz
90
IE1
280 M
1PP4283-2FB..
17400.– 30
IE1
180 L
1PP4188-4FA..
5290.–
110
IE1
315 S
1PP4310-2FB..
21300.– 37
IE1
200 L
1PP4208-4FA..
6310.–
132
IE1
315 M
1PP4313-2FB..
25500.– 55
IE1
225 M
1PP4228-4FA..
9260.–
160
IE1
315 L
1PP4316-2FB..
31600.– 75
IE1
250 M
1PP4258-4FA..
12000.–
200
IE1
315 L
1PP4317-2FB..
39500.– 110
IE1
280 M
1PP4288-4FA..
18300.–
4-pole: 1500 rpm at 50 Hz
6-pole: 1000 rpm at 50 Hz
18.5
IE1
180 M
1PP4183-4FA..
3630.– 18.5
IE1
180 L
1PP4188-6FA..
5330.–
22
IE1
180 L
1PP4186-4FA..
4280.– 30
IE1
200 L
1PP4208-6FA..
7520.–
30
IE1
200 L
1PP4207-4FA..
5680.– 37
IE1
225 M
1PP4228-6FA..
9620.–
37
IE1
225 S
1PP4220-4FA..
6920.– 45
IE1
250 M
1PP4258-6FA..
11800.–
45
IE1
225 M
1PP4223-4FA..
8370.– 75
IE1
280 M
1PP4288-6FA..
18500.–
55
IE1
250 M
1PP4253-4FA..
10200.– 160
IE1
315 L
1PP4318-6FA..
44200.–
75
IE1
280 S
1PP4280-4FA..
13900.– 8-pole: 750 rpm at 50 Hz
90
IE1
280 M
1PP4283-4FA..
16400.– 15
–
180 L
1PP4188-8FB..
5660.–
110
IE1
315 S
1PP4310-4FA..
20300.– 18.5
–
200 L
1PP4208-8FB..
6690.–
132
IE1
315 M
1PP4313-4FA..
24100.– 30
–
225 M
1PP4228-8FB..
9920.–
160
IE1
315 L
1PP4316-4FA..
29700.– 37
–
250 M
1PP4258-8FB..
12400.–
200
IE1
315 L
1PP4317-4FA..
36900.– 55
–
280 M
1PP4288-8FB..
18300.–
6-pole: 1000 rpm at 50 Hz
132
–
315 L
1PP4318-8FB..
46100.–
15
IE1
180 L
1PP4186-6FA..
4390.–
18.5
IE1
200 L
1PP4206-6FA..
5370.–
22
IE1
200 L
1PP4207-6FA..
6320.–
30
IE1
225 M
1PP4223-6FA..
8690.–
37
IE1
250 M
1PP4253-6FA..
10500.–
45
IE1
280 S
1PP4280-6FA..
12900.–
55
IE1
280 M
1PP4283-6FA..
15600.–
75
IE1
315 S
1PP4310-6FA..
21300.–
90
IE1
315 M
1PP4313-6FA..
25500.–
110
IE1
315 L
1PP4316-6FA..
30700.–
132
IE1
315 L
1PP4317-6FA..
36400.–
8-pole: 750 rpm at 50 Hz
11
–
180 L
1PP4186-8FB..
4600.–
15
–
200 L
1PP4207-8FB..
6070.–
18.5
–
225 S
1PP4220-8FB..
7350.–
22
–
225 M
1PP4223-8FB..
8540.–
30
–
250 M
1PP4253-8FB..
11200.–
37
–
280 S
1PP4280-8FB..
13600.–
45
–
280 M
1PP4283-8FB..
16500.–
55
–
315 S
1PP4310-8FB..
20100.–
75
–
315 M
1PP4313-8FB..
27000.–
90
–
315 L
1PP4316-8FB..
31800.–
Can be ordered only as
110
–
315 L
1PP4317-8FB..
38400.–
marine version.
2/22
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LP Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors with Standard Efficiency IE1 (continued)
Series version
Cast-iron series 1LP4
Cooling
Naturally cooled without external fan (IC 410)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
ve
ser
Utilization
Thermal class 130 (B)
ob um
e
m
s
i
a
n
Number of poles
2, 4, 6, 8
Ple al mi cies
Frame sizes (FS)
180 M … 315 L
leg ficien EA!
f
e he E
Rated output at 50 Hz
3.7 ... 67 kW
in t
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
24 ... 477 Nm
Efficiency
Standard Efficiency IE1 or High Efficiency IE2 or Premium Efficiency IE3
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
7.3
IE2
180 M
1LP4183-2FA..
4120.–
10
IE2
200 L
1LP4206-2FA..
5310.–
12.5
IE2
200 L
1LP4207-2FA..
6930.–
15
IE2
225 M
1LP4223-2FA..
8420.–
18.5
IE2
250 M
1LP4253-2FB..
10300.–
25
IE2
280 S
1LP4280-2FB..
14000.–
30
IE2
280 M
1LP4283-2FB..
17000.–
37
IE2
315 S
1LP4310-2FB..
21100.–
44
IE2
315 M
1LP4313-2FB..
25000.–
53
IE2
315 L
1LP4316-2FB..
31200.–
67
IE2
315 L
1LP4317-2FB..
38600.–
4-pole: 1500 rpm at 50 Hz
6.2
IE2
180 M
1LP4183-4FA..
3580.–
7.3
IE2
180 L
1LP4186-4FA..
4190.–
10
IE2
200 L
1LP4207-4FA..
5560.–
12.5
IE2
225 S
1LP4220-4FA..
6800.–
15
IE2
225 M
1LP4223-4FA..
8230.–
18.5
IE2
250 M
1LP4253-4FA..
9970.–
25
IE2
280 S
1LP4280-4FA..
13700.–
30
IE2
280 M
1LP4283-4FA..
16100.–
37
IE2
315 S
1LP4310-4FA..
19900.–
44
IE2
315 M
1LP4313-4FA..
23800.–
53
IE2
315 L
1LP4316-4FA..
29000.–
67
IE2
315 L
1LP4317-4FA..
36300.–
6-pole: 1000 rpm at 50 Hz
5
IE3
180 L
1LP4186-6FA..
4280.–
6.2
IE3
200 L
1LP4206-6FA..
5260.–
7.3
IE3
200 L
1LP4207-6FA..
6210.–
10
IE3
225 M
1LP4223-6FA..
8540.–
12.5
IE3
250 M
1LP4253-6FA..
10300.–
15
IE3
280 S
1LP4280-6FA..
12700.–
18.5
IE3
280 M
1LP4283-6FA..
15300.–
25
IE3
315 S
1LP4310-6FA..
21100.–
30
IE3
315 M
1LP4313-6FA..
25000.–
37
IE3
315 L
1LP4316-6FA..
30300.–
44
IE3
315 L
1LP4317-6FA..
35900.–
8-pole: 750 rpm at 50 Hz
3.7
–
180 L
1LP4186-8FB..
4530.–
5
–
200 L
1LP4207-8FB..
5950.–
6.2
–
225 S
1LP4220-8FB..
7220.–
7.3
–
225 M
1LP4223-8FB..
8380.–
10
–
250 M
1LP4253-8FB..
11000.–
12.5
–
280 S
1LP4280-8FB..
13400.–
15
–
280 M
1LP4283-8FB..
16300.–
18.5
–
315 S
1LP4310-8FB..
19600.–
25
–
315 M
1LP4313-8FB..
26300.–
30
–
315 L
1LP4316-8FB..
31300.–
37
–
315 L
1LP4317-8FB..
37500.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/23
2
© Siemens AG 2015
SIMOTICS GP 1LE1 Standard Motors — Eagle Line
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
NEMA Energy Efficient MG1 motors Table 12-11
Aluminum series 1LE1021 1)
Self-ventilated (IC 411) or with order code F90,
forced-air cooled without external fan and fan cover (IC 416)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
80 M ... 160 L
Rated output
0.37 ... 18.5 kW at 50 Hz
0.5 … 25 hp at 60 Hz
Synchronous speed
1000 ... 3600 rpm
Rated torque
2.1 ... 89 Nm at 60 Hz
Efficiency
NEMA Energy Efficient MG1 Table 12-11 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, Prated, Frame
Article No.
Base
size
price
50 Hz
60 Hz
kW
hp
FS
 New
EUR
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
0.75
1
80 M
1LE1021-0DA2.-....
526.–
1.1
1.5
80 M
1LE1021-0DA3.-....
591.–
1.5
2
90 S
1LE1021-0EA0.-....
680.–
2.2
3
90 L
1LE1021-0EA4.-....
853.–
3
4
100 L
1LE1021-1AA4.-.... 1030.–
4
5
112 M
1LE1021-1BA2.-.... 1220.–
5.5
7.5
132 S
1LE1021-1CA0.-.... 1530.–
7.5
10
132 S
1LE1021-1CA1.-.... 1900.–
11
15
160 M
1LE1021-1DA2.-.... 2610.–
15
20
160 M
1LE1021-1DA3.-.... 3350.–
18.5
25
160 L
1LE1021-1DA4.-.... 3960.–
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
0.55
0.75
80 M
1LE1021-0DB2.-....
522.–
0.75
1
80 M
1LE1021-0DB3.-....
564.–
1.1
1.5
90 S
1LE1021-0EB0.-....
662.–
1.5
2
90 L
1LE1021-0EB4.-....
771.–
2.2
3
100 L
1LE1021-1AB4.-....
942.–
3
4
100 L
1LE1021-1AB5.-.... 1070.–
4
5
112 M
1LE1021-1BB2.-.... 1300.–
5.5
7.5
132 S
1LE1021-1CB0.-.... 1640.–
7.5
10
132 M
1LE1021-1CB2.-.... 2040.–
11
15
160 M
1LE1021-1DB2.-.... 2670.–
15
20
160 L
1LE1021-1DB4.-.... 3400.–
6-pole: 1000 rpm at 50 Hz, 1200 rpm at 60 Hz
0.37
0.5
80 M
1LE1021-0DC2.-....
405.–
0.55
0.75
80 M
1LE1021-0DC3.-....
468.–
0.75
1
90 S
1LE1021-0EC0.-....
530.–
1.1
1.5
100 L
1LE1021-1AC3.-....
656.–
1.5
2
100 L
1LE1021-1AC4.-....
932.–
2.2
3
112 M
1LE1021-1BC2.-.... 1170.–
3
4
132 S
1LE1021-1CC0.-.... 1480.–
4
5
132 M
1LE1021-1CC2.-.... 1780.–
5.5
7.5
132 M
1LE1021-1CC3.-.... 2210.–
7.5
10
160 M
1LE1021-1DC2.-.... 2790.–
11
15
160 L
1LE1021-1DC4.-.... 3780.–
Series version
Cooling
2
1)
Notes on motors 1LE1021 NEMA Energy Efficient:
- Comprises CSA, UL and CC No.
- Only valid for voltages ≤ 600 V
- For ≤ 200 hp only flange-mounting types are admissible
2/24
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors — Eagle Line
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
NEMA Energy Efficient MG1 motors Table 12-11 (continued)
Cast-iron series 1LE1521 Basic Line, 1LE1621 Performance Line 1)
(continued on the next page)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
71 M ... 315 L
Rated output
0.18 ... 200 kW at 50 Hz
0.25 … 250 hp at 60 Hz
Synchronous speed
1000 ... 3600 rpm
Rated torque
1.0 ... 1195 Nm at 60 Hz
Efficiency
NEMA Energy Efficient MG1 Table 12-11 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, Prated, Frame
Article No.
Base
Article No.
Base
size
price
50 Hz
60 Hz
Basic Line
Performance Line price
Series version
kW
hp
FS
 New
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
0.37
0.5
71 M  1LE1521-0CA2.-....
0.55
0.75
71 M  1LE1521-0CA3.-....
0.75
1
80 M  1LE1521-0DA2.-....
1.1
1.5
80 M  1LE1521-0DA3.-....
1.5
2
90 S
 1LE1521-0EA0.-....
2.2
3
90 L
 1LE1521-0EA4.-....
3
4
100 L
1LE1521-1AA4.-....
4
5
112 M
1LE1521-1BA2.-....
5.5
7.5
132 S
1LE1521-1CA0.-....
7.5
10
132 S
1LE1521-1CA1.-....
11
15
160 M
1LE1521-1DA2.-....
15
20
160 M
1LE1521-1DA3.-....
18.5
25
160 L
1LE1521-1DA4.-....
22
30
180 M
1LE1521-1EA2.-....
30
40
200 L
1LE1521-2AA4.-....
37
50
200 L
1LE1521-2AA5.-....
45
60
225 M
1LE1521-2BA2.-....
55
75
250 M
1LE1521-2CA2.-....
75
100
280 S
1LE1521-2DA0.-....
90
125
280 M
1LE1521-2DA2.-....
110
150
315 S
1LE1521-3AA0.-....
132
175
315 M
1LE1521-3AA2.-....
160
200
315 L
1LE1521-3AA4.-....
200
250
315 L
1LE1521-3AA5.-....
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
0.25
0.33
71 M  1LE1521-0CB2.-....
0.37
0.5
71 M  1LE1521-0CB3.-....
0.55
0.75
80 M  1LE1521-0DB2.-....
0.75
1
80 M  1LE1521-0DB3.-....
1.1
1.5
90 S
 1LE1521-0EB0.-....
1.5
2
90 L
 1LE1521-0EB4.-....
2.2
3
100 L
1LE1521-1AB4.-....
3
4
100 L
1LE1521-1AB5.-....
4
5
112 M
1LE1521-1BB2.-....
5.5
7.5
132 S
1LE1521-1CB0.-....
7.5
10
132 M
1LE1521-1CB2.-....
11
15
160 M
1LE1521-1DB2.-....
15
20
160 L
1LE1521-1DB4.-....
18.5
25
180 M
1LE1521-1EB2.-....
22
30
180 L
1LE1521-1EB4.-....
30
40
200 L
1LE1521-2AB5.-....
37
50
225 S
1LE1521-2BB0.-....
45
60
225 M
1LE1521-2BB2.-....
55
75
250 M
1LE1521-2CB2.-....
75
100
280 S
1LE1521-2DB0.-....
90
125
280 M
1LE1521-2DB2.-....
110
150
315 S
1LE1521-3AB0.-....
132
175
315 M
1LE1521-3AB2.-....
160
200
315 L
1LE1521-3AB4.-....
200
250
315 L
1LE1521-3AB5.-....
1)
EUR
 New
EUR
538.–
619.–
640.–
720.–
829.–
995.–
1110.–
1310.–
1660.–
2050.–
2820.–
3630.–
4290.–
4880.–
6340.–
7870.–
9420.–
11200.–
15200.–
17800.–
21600.–
25600.–
31600.–
39200.–
1LE1621-1AA4.-....
1LE1621-1BA2.-....
1LE1621-1CA0.-....
1LE1621-1CA1.-....
1LE1621-1DA2.-....
1LE1621-1DA3.-....
1LE1621-1DA4.-....
1LE1621-1EA2.-....
1LE1621-2AA4.-....
1LE1621-2AA5.-....
1LE1621-2BA2.-....
1LE1621-2CA2.-....
1LE1621-2DA0.-....
1LE1621-2DA2.-....
1LE1621-3AA0.-....
1LE1621-3AA2.-....
1LE1621-3AA4.-....
1LE1621-3AA5.-....
1210.–
1430.–
1800.–
2240.–
3220.–
4150.–
4900.–
5330.–
6940.–
8610.–
10300.–
12300.–
15700.–
18700.–
22500.–
26900.–
33100.–
41200.–
535.–
591.–
636.–
687.–
807.–
898.–
1020.–
1160.–
1420.–
1760.–
2200.–
2870.–
3680.–
4170.–
4810.–
6260.–
7620.–
8890.–
10800.–
14400.–
16900.–
21000.–
24700.–
29700.–
36800.–
1LE1621-1AB4.-....
1LE1621-1AB5.-....
1LE1621-1BB2.-....
1LE1621-1CB0.-....
1LE1621-1CB2.-....
1LE1621-1DB2.-....
1LE1621-1DB4.-....
1LE1621-1EB2.-....
1LE1621-1EB4.-....
1LE1621-2AB5.-....
1LE1621-2BB0.-....
1LE1621-2BB2.-....
1LE1621-2CB2.-....
1LE1621-2DB0.-....
1LE1621-2DB2.-....
1LE1621-3AB0.-....
1LE1621-3AB2.-....
1LE1621-3AB4.-....
1LE1621-3AB5.-....
1110.–
1260.–
1540.–
1930.–
2400.–
3280.–
4200.–
4570.–
5260.–
6850.–
8340.–
9730.–
11800.–
14900.–
17200.–
21600.–
25500.–
30600.–
37800.–
Notes on motors 1LE1521/1LE1621 NEMA Energy Efficient:
- Comprises CSA, UL and CC No.
- Only valid for voltages ≤ 600 V
- For ≤ 200 hp only flange-mounting types are admissible
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/25
2
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors — Eagle Line
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
NEMA Energy Efficient MG1 motors Table 12-11 (continued)
Cast-iron series 1LE1521 Basic Line, 1LE1621 Performance Line 1)
(continued)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
71 M ... 315 L
Rated output
0.18 ... 200 kW at 50 Hz
0.25 … 250 hp at 60 Hz
Synchronous speed
1000 ... 3600 rpm
Rated torque
1.0 ... 1195 Nm at 60 Hz
Efficiency
NEMA Energy Efficient MG1 Table 12-11 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, Prated, Frame
Article No.
Base
Article No.
Base
size
price
50 Hz
60 Hz
Basic Line
Performance Line price
Series version
2
kW
hp
FS
 New
6-pole: 1000 rpm at 50 Hz, 1200 rpm at 60 Hz
0.18
0.25
71 M  1LE1521-0CC2.-....
0.25
0.33
71 M  1LE1521-0CC3.-....
0.37
0.5
80 M  1LE1521-0DC2.-....
0.55
0.75
80 M  1LE1521-0DC3.-....
0.75
1
90 S
 1LE1521-0EC0.-....
1.1
1.5
90 L
 1LE1521-0EC4.-....
1.5
2
100 L
1LE1521-1AC4.-....
2.2
3
112 M
1LE1521-1BC2.-....
3
4
132 S
1LE1521-1CC0.-....
4
5
132 M
1LE1521-1CC2.-....
5.5
7.5
132 M
1LE1521-1CC3.-....
7.5
10
160 M
1LE1521-1DC2.-....
11
15
160 L
1LE1521-1DC4.-....
15
20
180 L
1LE1521-1EC4.-....
18.5
25
200 L
1LE1521-2AC4.-....
22
30
200 L
1LE1521-2AC5.-....
30
40
225 M
1LE1521-2BC2.-....
37
50
250 M
1LE1521-2CC2.-....
45
60
280 S
1LE1521-2DC0.-....
55
75
280 M
1LE1521-2DC2.-....
75
100
315 S
1LE1521-3AC0.-....
90
125
315 M
1LE1521-3AC2.-....
110
150
315 L
1LE1521-3AC4.-....
132
175
315 L
1LE1521-3AC5.-....
160
200
315 L
1LE1521-3AC6.-....
8-pole: 750 rpm at 50 Hz, 900 rpm at 60 Hz
11
15
180 L
1LE1521-1ED4.-....
15
20
200 L
1LE1521-2AD5.-....
18.5
25
200 L
1LE1521-2BD0.-....
22
30
225 M
1LE1521-2BD2.-....
30
40
250 M
1LE1521-2CD2.-....
37
50
280 S
1LE1521-2DD0.-....
45
60
280 M
1LE1521-2DD2.-....
55
75
315 S
1LE1521-3AD0.-....
75
100
315 M
1LE1521-3AD2.-....
90
125
315 L
1LE1521-3AD4.-....
110
150
315 L
1LE1521-3AD5.-....
132
175
315 L
1LE1521-3AD6.-....
1)
 New
EUR
EUR
520.–
605.–
617.–
703.–
793.–
910.–
1000.–
1260.–
1590.–
1780.–
2380.–
3020.–
4090.–
5120.–
6300.–
7230.–
9670.–
11800.–
14300.–
16900.–
22800.–
25600.–
30700.–
36400.–
43800.–
1LE1621-1AC4.-....
1LE1621-1BC2.-....
1LE1621-1CC0.-....
1LE1621-1CC2.-....
1LE1621-1CC3.-....
1LE1621-1DC2.-....
1LE1621-1DC4.-....
1LE1621-1EC4.-....
1LE1621-2AC4.-....
1LE1621-2AC5.-....
1LE1621-2BC2.-....
1LE1621-2CC2.-....
1LE1621-2DC0.-....
1LE1621-2DC2.-....
1LE1621-3AC0.-....
1LE1621-3AC2.-....
1LE1621-3AC4.-....
1LE1621-3AC5.-....
1LE1621-3AC6.-....
1100.–
1370.–
1730.–
1960.–
2610.–
3430.–
4670.–
5600.–
6890.–
7920.–
10600.–
12800.–
14800.–
17200.–
23400.–
26400.–
31600.–
37300.–
45100.–
5470.–
7290.–
8850.–
10000.–
13000.–
15400.–
18600.–
22200.–
29500.–
32500.–
39200.–
46800.–
1LE1621-1ED4.-....
1LE1621-2AD5.-....
1LE1621-2BD0.-....
1LE1621-2BD2.-....
1LE1621-2CD2.-....
1LE1621-2DD0.-....
1LE1621-2DD2.-....
1LE1621-3AD0.-....
1LE1621-3AD2.-....
1LE1621-3AD4.-....
1LE1621-3AD5.-....
1LE1621-3AD6.-....
6030.–
8030.–
9740.–
11100.–
14400.–
15900.–
19200.–
22900.–
30400.–
33500.–
40400.–
48300.–
Notes on motors 1LE1521/1LE1621 NEMA Energy Efficient:
- Comprises CSA, UL and CC No.
- Only valid for voltages ≤ 600 V
- For ≤ 200 hp only flange-mounting types are admissible
2/26
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP/SD 1LA/1LG Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
NEMA Energy Efficient MG1 motors Table 12-11 (continued)
Series version
Aluminum series 1LA9
Cast-iron series 1LG6
with order code D42 1)
with order code D42 1)
Cooling
Self-ventilated (IC 411)
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Thermal class 130 (B)
Number of poles
2, 4, 6
2, 4, 6
Frame sizes (FS)
63 M … 200 L
180 M … 315 L
Rated output
0.12 ... 37 kW at 50 Hz
15 ... 315 kW at 50 Hz
0.16 … 50 hp at 60 Hz
20 … 400 hp at 60 Hz
Synchronous speed
1000 ... 3600 rpm
1000 ... 3600 rpm
Rated torque
0.5 ... 179 Nm at 60 Hz
60 ... 1590 Nm at 60 Hz
Efficiency
NEMA Energy Efficient MG1 Table 12-11
NEMA Energy Efficient MG1 Table 12-11
with order code D42 1)
with order code D42 1)
Metal factor for metal surcharges (MS) N - W - - - - N-W----Price group (PG)
3Z1
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, Prated, Frame
Article No.
Base
Prated, Prated, Frame
Article No.
Base
price
price
50 Hz 60 Hz size
50 Hz 60 Hz size
kW
hp
FS
 Successor 1LE1021
2-pole: 3600 rpm at 60 Hz
0.18 0.25 63 M
1LA9060-2KA..-Z D42
0.25 0.33 63 M
1LA9063-2KA..-Z D42
0.37 0.5
71 M
1LA9070-2KA..-Z D42
0.55 0.75 71 M
1LA9073-2KA..-Z D42
0.75 1
80 M  1LA9080-2KA..-Z D42
1.1
1.5
80 M  1LA9083-2KA..-Z D42
1.5
2
90 S
 1LA9090-2KA..-Z D42
2.2
3
90 L
 1LA9096-2KA..-Z D42
3
4
100 L  1LA9106-2KA..-Z D42
4
5
112 M  1LA9113-2KA..-Z D42
5.5
7.5
132 S  1LA9130-2KA..-Z D42
7.5
10
132 S  1LA9131-2KA..-Z D42
11
15
160 M  1LA9163-2KA..-Z D42
15
20
160 M  1LA9164-2KA..-Z D42
18.5 25
160 L  1LA9166-2KA..-Z D42
22
30
180 M
1LA9183-2WA..-Z D42
30
40
200 L
1LA9206-2WA..-Z D42
37
50
200 L
1LA9207-2WA..-Z D42
4-pole: 1800 rpm at 60 Hz
0.12 0.16 63 M
1LA9060-4KA..-Z D42
0.19 0.25 63 M
1LA9063-4KA..-Z D42
0.25 0.33 71 M
1LA9070-4KA..-Z D42
0.37 0.5
71 M
1LA9073-4KA..-Z D42
0.55 0.75 80 M
1LA9080-4KA..-Z D42
0.75 1
80 M  1LA9083-4KA..-Z D42
1.1
1.5
90 S
 1LA9090-4KA..-Z D42
1.5
2
90 L
 1LA9096-4KA..-Z D42
2.2
3
100 L  1LA9106-4KA..-Z D42
3
4
100 L  1LA9107-4KA..-Z D42
4
5
112 M  1LA9113-4KA..-Z D42
5.5
7.5
132 S  1LA9130-4KA..-Z D42
7.5
10
132 M  1LA9133-4KA..-Z D42
11
15
160 M  1LA9163-4KA..-Z D42
15
20
160 L  1LA9166-4KA..-Z D42
18.5 25
180 M
1LA9183-4WA..-Z D42
22
30
180 L
1LA9186-4WA..-Z D42
30
40
200 L
1LA9207-4WA..-Z D42
6-pole: 1200 rpm at 60 Hz
0.75 1
90 S
1LA9090-6KA..-Z D42
1.1
1.5
90 L
1LA9096-6KA..-Z D42
1.5
2
100 L  1LA9106-6KA..-Z D42
2.2
3
112 M  1LA9113-6KA..-Z D42
4
5
132 M  1LA9133-6KA..-Z D42
5.5
7.5
132 M  1LA9134-6KA..-Z D42
7.5
10
160 M  1LA9163-6KA..-Z D42
11
15
160 L  1LA9166-6KA..-Z D42
15
20
180 L
1LA9186-6WA..-Z D42
18.5 25
200 L
1LA9206-6WA..-Z D42
22
30
200 L
1LA9207-6WA..-Z D42
1)
EUR
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
kW
hp
FS
 New
2-pole: 3600 rpm at 60 Hz
250
300
315 L
1LG6318-2MB..-Z D42
315
400
315 L
1LG6312-2MA..-Z D42
4-pole: 1800 rpm at 60 Hz
250
300
315 L
1LG6318-4MA..-Z D42
315
400
315 L
1LG6312-4MA..-Z D42
6-pole: 1200 rpm at 60 Hz
15
20
180 L
1LG6186-6AA..-Z D42
18.5 25
200 L
1LG6206-6AA..-Z D42
22
30
200 L
1LG6207-6AA..-Z D42
30
40
225 M
1LG6223-6AA..-Z D42
37
50
250 M
1LG6253-6AA..-Z D42
45
60
280 S
1LG6280-6AA..-Z D42
55
75
280 M
1LG6283-6AA..-Z D42
75
100
315 S
1LG6310-6AA..-Z D42
90
125
315 M
1LG6313-6AA..-Z D42
110
150
315 L
1LG6316-6AA..-Z D42
132
175
315 L
1LG6317-6AA..-Z D42
160
200
315 L
1LG6318-6AA..-Z D42
200
250
315 L
1LG6312-6MA..-Z D42
EUR
44900.–
56300.–
42100.–
52900.–
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
49600.–
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
Can be ordered only as
explosion proof and
marine version.
Notes on order code D42 NEMA Energy Efficient:
- Comprises CSA, UL and CC No.
- Only valid for voltages ≤ 600 V
- For ≤ 200 hp only flange-mounting types are admissible
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/27
2
© Siemens AG 2015
SIMOTICS SD 1LG Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
NEMA Energy Efficient MG1 motors Table 12-11 (continued)
Series version
2
Cast-iron series 1LG6
with increased output and order code D42 1)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
200 L … 280 M
Rated output
37 ... 110 kW at 50 Hz
50 … 150 hp at 60 Hz
Synchronous speed
1000 ... 3600 rpm
Rated torque
120 ... 599 Nm at 60 Hz
Efficiency
NEMA Energy Efficient MG1 Table 12-11 with order code D42 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, Prated, Frame
Article No.
Base
size
price
50 Hz
60 Hz
kW
hp
FS

2-pole: 3600 rpm at 60 Hz
45
60
200 L
55
75
225 M
75
100
250 M
110
150
280 M
4-pole: 1800 rpm at 60 Hz
55
75
225 M
75
100
250 M
110
150
280 M
6-pole: 1200 rpm at 60 Hz
37
50
225 M
45
60
250 M
75
100
280 M
New
EUR
1LG6208-2AA..-Z D42
1LG6228-2AA..-Z D42
1LG6258-2AA..-Z D42
1LG6288-2AA..-Z D42
O. R.
O. R.
O. R.
O. R.
1LG6228-4AA..-Z D42
1LG6258-4AA..-Z D42
1LG6288-4AA..-Z D42
O. R.
O. R.
O. R.
1LG6228-6AA..-Z D42
1LG6258-6AA..-Z D42
1LG6288-6AA..-Z D42
O. R.
O. R.
O. R.
Can be ordered only as explosion proof and marine version or as PM version or as
PM version "Converter-fed operation" (see Page 2/44).
1)
Notes on order code D42 NEMA Energy Efficient:
- Comprises CSA, UL and CC No.
- Only valid for voltages ≤ 600 V
- For ≤ 200 hp only flange-mounting types are admissible
2/28
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LE1 Standard Motors — Eagle Line
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
NEMA Premium Efficient MG1 motors Table 12-12
Aluminum series 1LE1023 1)
Self-ventilated (IC 411) or with order code F90,
forced-air cooled without external fan and fan cover (IC 416)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
80 M ... 160 L
Rated output
0.37 ... 18.5 kW at 50 Hz
0.5 … 25 hp at 60 Hz
Synchronous speed
1000 ... 3600 rpm
Rated torque
2.1 ... 89 Nm at 60 Hz
Efficiency
NEMA Premium Efficient MG1 Table 12-12 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, Prated, Frame
Article No.
Base
size
price
50 Hz
60 Hz
Series version
Cooling
kW
hp
FS
 New
EUR
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
0.75
1
80 M
1LE1023-0DA2.-....
626.–
1.1
1.5
80 M
1LE1023-0DA3.-....
716.–
1.5
2
90 S
1LE1023-0EA0.-....
827.–
2.2
3
90 L
1LE1023-0EA4.-.... 1070.–
3
4
100 L
1LE1023-1AA4.-.... 1180.–
4
5
112 M
1LE1023-1BA2.-.... 1390.–
5.5
7.5
132 S
1LE1023-1CA0.-.... 1750.–
7.5
10
132 S
1LE1023-1CA1.-.... 2220.–
11
15
160 M
1LE1023-1DA2.-.... 3080.–
15
20
160 M
1LE1023-1DA3.-.... 4020.–
18.5
25
160 L
1LE1023-1DA4.-.... 4790.–
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
0.55
0.75
80 M
1LE1023-0DB2.-....
621.–
0.75
1
80 M
1LE1023-0DB3.-....
678.–
1.1
1.5
90 S
1LE1023-0EB0.-....
802.–
1.5
2
90 L
1LE1023-0EB4.-....
952.–
2.2
3
100 L
1LE1023-1AB4.-.... 1070.–
3
4
100 L
1LE1023-1AB5.-.... 1230.–
4
5
112 M
1LE1023-1BB2.-.... 1510.–
5.5
7.5
132 S
1LE1023-1CB0.-.... 1890.–
7.5
10
132 M
1LE1023-1CB2.-.... 2400.–
11
15
160 M
1LE1023-1DB2.-.... 3150.–
15
20
160 L
1LE1023-1DB4.-.... 4090.–
6-pole: 1000 rpm at 50 Hz, 1200 rpm at 60 Hz
0.37
0.5
80 M
1LE1023-0DC2.-....
601.–
0.55
0.75
80 M
1LE1023-0DC3.-....
696.–
0.75
1
90 S
1LE1023-0EC0.-....
787.–
1.1
1.5
100 L
1LE1023-1AC3.-....
973.–
3
4
132 S
1LE1023-1CC0.-.... 1690.–
4
5
132 M
1LE1023-1CC2.-.... 2080.–
5.5
7.5
132 M
1LE1023-1CC3.-.... 2610.–
7.5
10
160 M
1LE1023-1DC2.-.... 3300.–
11
15
160 L
1LE1023-1DC4.-.... 4570.–
1)
Notes on motors 1LE1023 NEMA Premium Efficient:
- Comprises CSA, UL and CC No.
- Only valid for voltages ≤ 600 V
- All types are admissible
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/29
2
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors — Eagle Line
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
NEMA Premium Efficient MG1 motors Table 12-12 (continued)
Cast-iron series 1LE1523 Basic Line, 1LE1623 Performance Line 1)
(continued on the next page)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
71 M ... 315 L
Rated output
0.18 ... 200 kW at 50 Hz
0.25 … 250 hp at 60 Hz
Synchronous speed
1000 ... 3600 rpm
Rated torque
1.0 ... 1195 Nm at 60 Hz
Efficiency
NEMA Premium Efficient MG1 Table 12-12 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, Prated, Frame
Article No.
Base
Article No.
Base
size
price
50 Hz
60 Hz
Basic Line
Performance Line price
kW
hp
FS
 New
EUR
 New
EUR
2-pole: 3000 rpm at 50 Hz, 3600 rpm at 60 Hz
0.37
0.5
71 M  1LE1523-0CA2.-....
699.–
0.55
0.75
71 M  1LE1523-0CA3.-....
805.–
0.75
1
80 M  1LE1523-0DA2.-....
839.–
1.1
1.5
80 M  1LE1523-0DA3.-....
947.–
1.5
2
90 S
 1LE1523-0EA0.-.... 1090.–
2.2
3
90 L
 1LE1523-0EA4.-.... 1330.–
3
4
100 L
1LE1523-1AA4.-.... 1270.–
1LE1623-1AA4.-.... 1380.–
4
5
112 M
1LE1523-1BA2.-.... 1510.–
1LE1623-1BA2.-.... 1630.–
5.5
7.5
132 S
1LE1523-1CA0.-.... 1900.–
1LE1623-1CA0.-.... 2060.–
7.5
10
132 S
1LE1523-1CA1.-.... 2410.–
1LE1623-1CA1.-.... 2600.–
11
15
160 M
1LE1523-1DA2.-.... 3340.–
1LE1623-1DA2.-.... 3730.–
15
20
160 M
1LE1523-1DA3.-.... 4360.–
1LE1623-1DA3.-.... 4870.–
18.5
25
160 L
1LE1523-1DA4.-.... 5200.–
1LE1623-1DA4.-.... 5810.–
22
30
180 M
1LE1523-1EA2.-.... 5810.–
1LE1623-1EA2.-.... 6270.–
30
40
200 L
1LE1523-2AA4.-.... 7540.–
1LE1623-2AA4.-.... 8130.–
37
50
200 L
1LE1523-2AA5.-.... 9460.–
1LE1623-2AA5.-.... 10200.–
45
60
225 M
1LE1523-2BA2.-.... 10800.–
1LE1623-2BA2.-.... 11700.–
55
75
250 M
1LE1523-2CA2.-.... 12800.–
1LE1623-2CA2.-.... 13900.–
75
100
280 S
1LE1523-2DA0.-.... 17500.–
1LE1623-2DA0.-.... 17900.–
90
125
280 M
1LE1523-2DA2.-.... 20800.–
1LE1623-2DA2.-.... 21700.–
110
150
315 S
1LE1523-3AA0.-.... 24900.–
1LE1623-3AA0.-.... 26000.–
132
175
315 M
1LE1523-3AA2.-.... 29900.–
1LE1623-3AA2.-.... 31100.–
160
200
315 L
1LE1523-3AA4.-.... 37100.–
1LE1623-3AA4.-.... 38700.–
200
250
315 L
1LE1523-3AA5.-.... 43400.–
1LE1623-3AA5.-.... 45300.–
4-pole: 1500 rpm at 50 Hz, 1800 rpm at 60 Hz
0.25
0.33
71 M  1LE1523-0CB2.-....
696.–
0.37
0.5
71 M  1LE1523-0CB3.-....
768.–
0.55
0.75
80 M  1LE1523-0DB2.-....
833.–
0.75
1
80 M  1LE1523-0DB3.-....
901.–
1.1
1.5
90 S
 1LE1523-0EB0.-.... 1060.–
1.5
2
90 L
 1LE1523-0EB4.-.... 1190.–
2.2
3
100 L
1LE1523-1AB4.-.... 1160.–
1LE1623-1AB4.-.... 1250.–
3
4
100 L
1LE1523-1AB5.-.... 1340.–
1LE1623-1AB5.-.... 1440.–
4
5
112 M
1LE1523-1BB2.-.... 1650.–
1LE1623-1BB2.-.... 1770.–
5.5
7.5
132 S
1LE1523-1CB0.-.... 2050.–
1LE1623-1CB0.-.... 2210.–
7.5
10
132 M
1LE1523-1CB2.-.... 2600.–
1LE1623-1CB2.-.... 2800.–
11
15
160 M
1LE1523-1DB2.-.... 3410.–
1LE1623-1DB2.-.... 3820.–
15
20
160 L
1LE1523-1DB4.-.... 4430.–
1LE1623-1DB4.-.... 4960.–
18.5
25
180 M
1LE1523-1EB2.-.... 4930.–
1LE1623-1EB2.-.... 5320.–
22
30
180 L
1LE1523-1EB4.-.... 5730.–
1LE1623-1EB4.-.... 6180.–
30
40
200 L
1LE1523-2AB5.-.... 7430.–
1LE1623-2AB5.-.... 8020.–
37
50
225 S
1LE1523-2BB0.-.... 8630.–
1LE1623-2BB0.-.... 9350.–
45
60
225 M
1LE1523-2BB2.-.... 10200.–
1LE1623-2BB2.-.... 11000.–
55
75
250 M
1LE1523-2CB2.-.... 12300.–
1LE1623-2CB2.-.... 13300.–
75
100
280 S
1LE1523-2DB0.-.... 16700.–
1LE1623-2DB0.-.... 17100.–
90
125
280 M
1LE1523-2DB2.-.... 19500.–
1LE1623-2DB2.-.... 20000.–
110
150
315 S
1LE1523-3AB0.-.... 24300.–
1LE1623-3AB0.-.... 24900.–
132
175
315 M
1LE1523-3AB2.-.... 28800.–
1LE1623-3AB2.-.... 29500.–
160
200
315 L
1LE1523-3AB4.-.... 34800.–
1LE1623-3AB4.-.... 35700.–
200
250
315 L
1LE1523-3AB5.-.... 40600.–
1LE1623-3AB5.-.... 41700.–
Series version
2
1)
Notes on motors 1LE1523/1LE1623 NEMA Premium Efficient:
- Comprises CSA, UL and CC No.
- Only valid for voltages ≤ 600 V
- All types are admissible
2/30
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors — Eagle Line
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
NEMA Premium Efficient MG1 motors Table 12-12 (continued)
Cast-iron series 1LE1523 Basic Line, 1LE1623 Performance Line 1)
(continued)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
71 M ... 315 L
Rated output
0.18 ... 200 kW at 50 Hz
0.25 … 250 hp at 60 Hz
Synchronous speed
1000 ... 3600 rpm
Rated torque
1.0 ... 1195 Nm at 60 Hz
Efficiency
NEMA Premium Efficient MG1 Table 12-12 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, Prated, Frame
Article No.
Base
Article No.
Base
size
price
50 Hz
60 Hz
Basic Line
Performance Line price
Series version
kW
hp
FS
 New
6-pole: 1000 rpm at 50 Hz, 1200 rpm at 60 Hz
0.18
0.25
71 M  1LE1523-0CC2.-....
0.25
0.33
71 M  1LE1523-0CC3.-....
0.37
0.5
80 M  1LE1523-0DC2.-....
0.55
0.75
80 M  1LE1523-0DC3.-....
0.75
1
90 S
 1LE1523-0EC0.-....
1.1
1.5
90 L
 1LE1523-0EC4.-....
3
4
132 S
1LE1523-1CC0.-....
4
5
132 M
1LE1523-1CC2.-....
5.5
7.5
132 M
1LE1523-1CC3.-....
7.5
10
160 M
1LE1523-1DC2.-....
11
15
160 L
1LE1523-1DC4.-....
15
20
180 L
1LE1523-1EC4.-....
18.5
25
200 L
1LE1523-2AC4.-....
22
30
200 L
1LE1523-2AC5.-....
30
40
225 M
1LE1523-2BC2.-....
37
50
250 M
1LE1523-2CC2.-....
45
60
280 S
1LE1523-2DC0.-....
55
75
280 M
1LE1523-2DC2.-....
75
100
315 S
1LE1523-3AC0.-....
90
125
315 M
1LE1523-3AC2.-....
110
150
315 L
1LE1523-3AC4.-....
132
175
315 L
1LE1523-3AC5.-....
160
200
315 L
1LE1523-3AC6.-....
1)
EUR
676.–
787.–
809.–
923.–
1040.–
1120.–
1820.–
2250.–
2830.–
3590.–
4960.–
6110.–
7480.–
8660.–
11100.–
13500.–
16500.–
19500.–
26500.–
29900.–
36000.–
42800.–
48600.–
 New
EUR
1LE1623-1CC0.-....
1LE1623-1CC2.-....
1LE1623-1CC3.-....
1LE1623-1DC2.-....
1LE1623-1DC4.-....
1LE1623-1EC4.-....
1LE1623-2AC4.-....
1LE1623-2AC5.-....
1LE1623-2BC2.-....
1LE1623-2CC2.-....
1LE1623-2DC0.-....
1LE1623-2DC2.-....
1LE1623-3AC0.-....
1LE1623-3AC2.-....
1LE1623-3AC4.-....
1LE1623-3AC5.-....
1LE1623-3AC6.-....
1980.–
2430.–
3060.–
4020.–
5540.–
6600.–
8080.–
9350.–
12100.–
14600.–
16900.–
20000.–
27100.–
30600.–
36800.–
43900.–
49900.–
Notes on motors 1LE1523/1LE1623 NEMA Premium Efficient:
- Comprises CSA, UL and CC No.
- Only valid for voltages ≤ 600 V
- All types are admissible
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/31
2
© Siemens AG 2015
SIMOTICS SD 1LG Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
NEMA Premium Efficient MG1 motors Table 12-12 (continued)
Series version
2
Cast-iron series 1LG6
with order code D41 1)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
315 L
Rated output
200 ... 315 kW at 50 Hz
250 … 400 hp at 60 Hz
Synchronous speed
1000 ... 3600 rpm
Rated torque
596 ... 1590 Nm at 60 Hz
Efficiency
NEMA Premium Efficient MG1 Table 12-12 with order code D41 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, Prated, Frame
Article No.
Base
size
price
50 Hz
60 Hz
kW
hp
FS
 New
EUR
2-pole: 3600 rpm at 60 Hz
250
300
315 L
1LG6318-2MB..-Z D41
49800.–
315
400
315 L
1LG6312-2MA..-Z D41
62700.–
4-pole: 1800 rpm at 60 Hz
250
300
315 L
1LG6318-4MA..-Z D41
46600.–
315
400
315 L
1LG6312-4MA..-Z D41
58800.–
6-pole: 1200 rpm at 60 Hz
200
250
315 L
1LG6312-6MA..-Z D41
55100.–
1)
Notes on order code D41 NEMA Premium Efficient:
- Comprises CSA, UL and CC No.
2/32
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LE1 Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Pole-changing motors
Series version
Aluminum series 1LE1011
for a constant load torque
Aluminum series 1LE1011 and 1LA1012
for square-law load torque
(e.g. for driving fans)
Cooling
Self-ventilated (IC 411)
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Thermal class 130 (B)
Number of poles
4/2, 8/4
4/2, 6/4, 8/4
Frame sizes (FS)
100 L ... 160 L
100 L ... 160 L
Rated output at 50 Hz
0.55 ... 16 kW
0.5 ... 16 kW
Synchronous speed
750 ... 3600 rpm
750 ... 3600 rpm
Rated torque at 50 Hz
7.3 ... 86 Nm
4.4 ... 91 Nm
Efficiency
–
–
Metal factor for metal surcharges (MS) N - W - - - - N-W----Price group (PG)
3Z1
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated1, Prated2, Frame
Article No.
Base
Prated1, Prated2, Frame
Article No.
Base
size
price
size
price
50 Hz
50 Hz
50 Hz
50 Hz
kW
kW
FS
EUR
kW
kW
FS
4/2-pole: 1500/3000 rpm at 50 Hz with one winding connected in Dahlander circuit
1500
3000
1500
3000
rpm
rpm
rpm
rpm
1.9
2.4
100 L
1LE1011-1AJ4.-....
897.– 0.65
2.4
100 L
2.5
3.1
100 L
1LE1011-1AJ5.-.... 1070.– 0.8
3.1
100 L
3.7
4.4
112 M
1LE1011-1BJ2.-.... 1330.– 1.1
4.4
112 M
4.7
5.9
132 S
1LE1011-1CJ0.-.... 1710.– 1.45
5.9
132 S
6.5
8
132 M
1LE1011-1CJ2.-.... 2230.– 2
8
132 M
9.3
11.5
160 M
1LE1011-1DJ2.-.... 2960.– 2.9
11.5
160 M
13
16
160 L
1LE1011-1DJ6.-.... 4280.– 4.3
16
160 L
6/4-pole: 1000/1500 rpm at 50 Hz with two windings
1000
1500
rpm
rpm
0.6
1.7
100 L
0.8
2.1
100 L
0.9
3
112 M
1.2
3.9
132 S
1.7
5.4
132 M
2.5
7.2
160 M
3.7
12
160 L
8/4-pole: 750/1500 rpm at 50 Hz with one winding connected in Dahlander circuit
750
1500
750
1500
rpm
rpm
rpm
rpm
0.55
1.1
100 L
1LE1011-1AL4.-....
754.– 0.5
2
100 L
0.9
1.5
100 L
1LE1011-1AL5.-....
870.– 0.65
2.5
100 L
1.1
1.9
112 M
1LE1011-1BL2.-.... 1010.– 0.9
3.6
112 M
1.6
3.2
132 S
1LE1011-1CL0.-.... 1410.– 1.1
4.7
132 S
2.2
4.4
132 M
1LE1011-1CL2.-.... 1820.– 1.4
6.4
132 M
3.5
7
160 M
1LE1011-1DL2.-.... 2510.– 2.2
9.5
160 M
5.6
11
160 L
1LE1011-1DL4.-.... 3720.– 3.3
14
160 L
Recommended retail prices plus metal surcharges (MS)
EUR
1LE1011-1AP4.-....
1LE1011-1AP5.-....
1LE1011-1BP2.-....
1LE1011-1CP0.-....
1LE1011-1CP2.-....
1LE1011-1DP2.-....
1LE1011-1DP6.-....
897.–
1070.–
1330.–
1710.–
2230.–
2960.–
4280.–
1LE1012-1AQ4.-....
1LE1012-1AQ5.-....
1LE1012-1BQ2.-....
1LE1012-1CQ0.-....
1LE1012-1CQ2.-....
1LE1012-1DQ2.-....
1LE1012-1DQ4.-....
958.–
1070.–
1240.–
1540.–
1890.–
2760.–
4020.–
1LE1011-1AR4.-....
1LE1011-1AR5.-....
1LE1011-1BR2.-....
1LE1011-1CR0.-....
1LE1011-1CR2.-....
1LE1011-1DR2.-....
1LE1011-1DR4.-....
754.–
870.–
1010.–
1410.–
1820.–
2510.–
3720.–
Siemens D 81.1 P · 03/2015
2/33
2
© Siemens AG 2015
SIMOTICS GP 1LA Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Pole-changing motors (continued)
Series version
2
Aluminum series 1LA7 and 1LA5
for a constant load torque
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
4/2, 8/4
Frame sizes (FS)
63 M … 200 L
Rated output at 50 Hz
0.1 ... 31 kW
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
0.54 ... 222 Nm
Efficiency
–
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated1, Prated2, Frame
Article No.
Base
size
price
50 Hz
50 Hz
kW
kW
FS
 Successor
EUR
1LE1011
4/2-pole: 1500/3000 rpm at 50 Hz with one winding connected in Dahlander circuit
1500
3000
rpm
rpm
0.1
0.15
63 M
1LA7060-0AA..
439.–
0.15
0.2
63 M
1LA7063-0AA..
449.–
0.21
0.28
71 M
1LA7070-0AA..
454.–
0.3
0.43
71 M
1LA7073-0AA..
509.–
0.48
0.6
80 M
1LA7080-0AA..
529.–
0.7
0.85
80 M
1LA7083-0AA..
608.–
1.1
1.4
90 S
1LA7090-0AA..
731.–
1.5
1.9
90 L
1LA7096-0AA..
877.–
2
2.4
100 L  1LA7106-0AA..
1050.–
2.6
3.1
100 L  1LA7107-0AA..
1250.–
3.7
4.4
112 M  1LA7113-0AA..
1560.–
4.7
5.9
132 S  1LA7130-0AA..
1990.–
6.5
8
132 M  1LA7133-0AA..
2610.–
9.3
11.5
160 M  1LA7163-0AA..
3450.–
13
17
160 L  1LA7166-0AA..
5000.–
15
18
180 M
1LA5183-0AA..
4730.–
18
21.5
180 L
1LA5186-0AA..
5680.–
26
31
200 L
1LA5207-0AA..
8060.–
8/4-pole: 750/1500 rpm at 50 Hz with one winding connected in Dahlander circuit
750
1500
rpm
rpm
0.75
1.1
100 L  1LA7106-0AB..
880.–
0.9
1.5
100 L  1LA7107-0AB..
1020.–
1.4
1.9
112 M  1LA7113-0AB..
1180.–
1.8
3.6
132 S  1LA7130-0AB..
1640.–
2.2
5.5
132 M  1LA7133-0AB..
2130.–
3.5
7
160 M  1LA7163-0AB..
2930.–
5.6
11
160 L  1LA7166-0AB..
4350.–
11
18
180 L
1LA5186-0AB..
5980.–
17
27
200 L
1LA5207-0AB..
8900.–
Can be ordered only as explosion proof and marine version or as PM version or as
PM version "Converter-fed operation" (see Page 2/44).
2/34
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Pole-changing motors (continued)
Series version
Aluminum series 1LA7 and 1LA5
for square-law load torque
(e.g. for driving fans)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
4/2, 6/4, 8/4
Frame sizes (FS)
80 M … 200 L
Rated output at 50 Hz
0.1 ... 28 kW
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
1 …182 Nm
Efficiency
–
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated1, Prated2, Frame
Article No.
Base
size
price
50 Hz
50 Hz
kW
kW
FS
 Successor 1LE101. EUR
4/2-pole: 1500/3000 rpm at 50 Hz with one winding connected in Dahlander circuit
1500
3000
rpm
rpm
0.15
0.7
80 M
1LA7080-0BA..
528.–
0.25
0.95
80 M
1LA7083-0BA..
608.–
0.33
1.4
90 S
1LA7090-0BA..
731.–
0.5
2
90 L
1LA7096-0BA..
877.–
0.65
2.5
100 L  1LA7106-0BA..
1050.–
0.8
3.1
100 L  1LA7107-0BA..
1250.–
1.1
4.4
112 M  1LA7113-0BA..
1560.–
1.45
5.9
132 S  1LA7130-0BA..
1990.–
2
8
132 M  1LA7133-0BA..
2610.–
2.9
11.5
160 M  1LA7163-0BA..
3450.–
4.3
17
160 L  1LA7166-0BA..
5000.–
6/4-pole: 1000/1500 rpm at 50 Hz with two windings
1000
1500
rpm
rpm
0.12
0.4
80 M
1LA7080-1BD..
551.–
0.18
0.55
80 M
1LA7083-1BD..
613.–
0.29
0.8
90 S
1LA7090-1BD..
730.–
0.38
1.1
90 L
1LA7096-1BD..
855.–
0.6
1.7
100 L  1LA7106-1BD..
1120.–
0.75
2.1
100 L  1LA7107-1BD..
1250.–
0.9
3
112 M  1LA7113-1BD..
1460.–
1.2
3.9
132 S  1LA7130-1BD..
1800.–
1.7
5.4
132 M  1LA7133-1BD..
2200.–
2.5
7.2
160 M  1LA7163-1BD..
3220.–
3.7
12
160 L  1LA7166-1BD..
4690.–
5.5
16
180 M
1LA5183-1BD..
5600.–
6.5
19
180 L
1LA5186-1BD..
6640.–
9.5
26
200 L
1LA5207-1BD..
9520.–
8/4-pole: 750/1500 rpm at 50 Hz in Dahlander circuit
750
1500
rpm
rpm
0.1
0.5
80 M
1LA7080-0BB..
464.–
0.15
0.7
80 M
1LA7083-0BB..
531.–
0.22
1
90 S
1LA7090-0BB..
610.–
0.33
1.5
90 L
1LA7096-0BB..
711.–
0.5
2
100 L  1LA7106-0BB..
880.–
0.65
2.5
100 L  1LA7107-0BB..
1020.–
0.9
3.6
112 M  1LA7113-0BB..
1180.–
1.1
4.7
132 S  1LA7130-0BB..
1640.–
1.4
6.4
132 M  1LA7133-0BB..
2130.–
2.2
9.5
160 M  1LA7163-0BB..
2930.–
3.3
14
160 L  1LA7166-0BB..
4350.–
4.5
16
180 M
1LA5183-0BB..
4590.–
5
18.5
180 L
1LA5186-0BB..
5980.–
7.5
28
200 L
1LA5207-0BB..
8900.–
Can be ordered only as explosion proof and marine version or as PM version or as
PM version "Converter-fed operation" (see Page 2/44).
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/35
2
© Siemens AG 2015
SIMOTICS SD 1LG Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Pole-changing motors (continued)
Series version
2
Cast-iron series 1LG4
for square-law load torque
(e.g. for driving fans)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
4/2, 6/4, 8/4
Frame sizes (FS)
180 M … 315 L
Rated output at 50 Hz
4.5 ... 175 kW
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
31 ... 1125 Nm
Efficiency
–
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated1, Prated2, Frame
Article No.
Base
size
price
50 Hz
50 Hz
kW
kW
FS
EUR
4/2-pole: 1500/3000 rpm at 50 Hz with one winding connected in Dahlander circuit
1500
3000
rpm
rpm
4.8
18
180 M
1LG4183-0BA..
5320.–
5.8
21.5
180 L
1LG4186-0BA..
6730.–
8.4
31
200 L
1LG4207-0BA..
8980.–
10.5
38
225 S
1LG4220-0BA..
10300.–
13
45
225 M
1LG4223-0BA..
12600.–
15
55
250 M
1LG4253-0BA..
15400.–
18
67
280 S
1LG4280-0BA..
19700.–
22
80
280 M
1LG4283-0BA..
23900.–
26
90
315 S
1LG4310-0BA..
28900.–
32
110
315 M
1LG4313-0BA..
35700.–
35
140
315 L
1LG4316-0BA..
43000.–
45
170
315 L
1LG4317-0BA..
49900.–
6/4-pole: 1000/1500 rpm at 50 Hz with two windings
1000
1500
rpm
rpm
5.5
16
180 M
1LG4183-1BD..
5980.–
6.5
19
180 L
1LG4186-1BD..
7090.–
9.5
26
200 L
1LG4207-1BD..
10200.–
12
34
225 S
1LG4220-1BD..
12700.–
14.5
40
225 M
1LG4223-1BD..
15200.–
18
52
250 M
1LG4253-1BD..
19200.–
25
70
280 S
1LG4280-1BD..
27400.–
30
82
280 M
1LG4283-1BD..
32400.–
33
92
315 S
1LG4310-1BD..
35800.–
45
120
315 M
1LG4313-1BD..
42700.–
50
150
315 L
1LG4316-1BD..
49100.–
55
170
315 L
1LG4317-1BD..
56500.–
8/4-pole: 750/1500 rpm at 50 Hz with one winding connected in Dahlander circuit
750
1500
rpm
rpm
4.5
16
180 M
1LG4183-0BB..
4900.–
5
18.5
180 L
1LG4186-0BB..
6400.–
7.5
28
200 L
1LG4207-0BB..
9510.–
9.5
35
225 S
1LG4220-0BB..
10900.–
11.5
42
225 M
1LG4223-0BB..
12700.–
14.5
52
250 M
1LG4253-0BB..
16200.–
19
70
280 S
1LG4280-0BB..
18900.–
23
83
280 M
1LG4283-0BB..
23400.–
26
95
315 S
1LG4310-0BB..
28700.–
30
115
315 M
1LG4313-0BB..
37200.–
35
140
315 L
1LG4316-0BB..
43700.–
45
175
315 L
1LG4317-0BB..
52900.–
2/36
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for converter-fed operation only
Series version
Aluminum series 1LA7 and 1LA5
with special insulation up to 690 V
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
100 L … 225 M
Rated output at 50 Hz
1.5 ... 45 kW
Synchronous speed
1000 ... 3000 rpm
Rated torque at 50 Hz
9.9 ... 293 Nm
Efficiency
Standard Efficiency
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS
2-pole: 3000 rpm at 50 Hz
3
–
100 L
4
–
112 M
5.5
–
132 S
7.5
–
132 S
11
–
160 M
15
–
160 M
18.5
–
160 L
22
–
180 M
30
–
200 L
37
–
200 L
45
–
225 M
4-pole: 1500 rpm at 50 Hz
2.2
–
100 L
3
–
100 L
4
–
112 M
5.5
–
132 S
7.5
–
132 M
11
–
160 M
15
–
160 L
18.5
–
180 M
22
–
180 L
30
–
200 L
37
–
225 S
45
–
225 M
6-pole: 1000 rpm at 50 Hz
1.5
–
100 L
2.2
–
112 M
3
–
132 S
4
–
132 M
5.5
–
132 M
7.5
–
160 M
11
–
160 L
15
–
180 L
18.5
–
200 L
22
–
200 L
30
–
225 M
Recommended retail prices plus metal surcharges (MS)
EUR
1LA7106-2PM..
1LA7113-2PM..
1LA7130-2PM..
1LA7131-2PM..
1LA7163-2PM..
1LA7164-2PM..
1LA7166-2PM..
1LA5183-2PM..
1LA5206-2PM..
1LA5207-2PM..
1LA5223-2PM..
1170.–
1420.–
1820.–
2310.–
3170.–
4100.–
4820.–
5310.–
6660.–
8430.–
10100.–
1LA7106-4PM..
1LA7107-4PM..
1LA7113-4PM..
1LA7130-4PM..
1LA7133-4PM..
1LA7163-4PM..
1LA7166-4PM..
1LA5183-4PM..
1LA5186-4PM..
1LA5207-4PM..
1LA5220-4PM..
1LA5223-4PM..
1020.–
1180.–
1470.–
1850.–
2380.–
3230.–
4130.–
4590.–
5310.–
6800.–
8100.–
9600.–
1LA7106-6PM..
1LA7113-6PM..
1LA7130-6PM..
1LA7133-6PM..
1LA7134-6PM..
1LA7163-6PM..
1LA7166-6PM..
1LA5186-6PM..
1LA5206-6PM..
1LA5207-6PM..
1LA5223-6PM..
1090.–
1340.–
1720.–
2090.–
2660.–
3380.–
4520.–
5390.–
6440.–
7330.–
9530.–
Siemens D 81.1 P · 03/2015
2/37
2
© Siemens AG 2015
SIMOTICS SD 1LG Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for converter-fed operation only (continued)
Series version
2
Cast-iron series 1LG6
with special insulation up to 690 V
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
180 M … 315 L
Rated output at 50 Hz
11 ... 200 kW
Synchronous speed
750 ... 3000 rpm
Rated torque at 50 Hz
71 ... 1704 Nm
Efficiency
High Efficiency
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 2/39, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Prated, IE
Frame
Article No.
Base
class
size
price
class
size
price
50 Hz
50 Hz
kW
FS
2-pole: 3000 rpm at 50 Hz
22
–
180 M
30
–
200 L
37
–
200 L
45
–
225 M
55
–
250 M
75
–
280 S
90
–
280 M
110
–
315 S
132
–
315 M
160
–
315 L
200
–
315 L
4-pole: 1500 rpm at 50 Hz
18.5
–
180 M
22
–
180 L
30
–
200 L
37
–
225 S
45
–
225 M
55
–
250 M
75
–
280 S
90
–
280 M
110
–
315 S
132
–
315 M
160
–
315 L
200
–
315 L
6-pole: 1000 rpm at 50 Hz
15
–
180 L
18.5
–
200 L
22
–
200 L
30
–
225 M
37
–
250 M
45
–
280 S
55
–
280 M
75
–
315 S
90
–
315 M
110
–
315 L
132
–
315 L
160
–
315 L
2/38
Siemens D 81.1 P · 03/2015
EUR
1LG6183-2PM..
1LG6206-2PM..
1LG6207-2PM..
1LG6223-2PM..
1LG6253-2PM..
1LG6280-2PM..
1LG6283-2PM..
1LG6310-2PM..
1LG6313-2PM..
1LG6316-2PM..
1LG6317-2PM..
5750.–
7180.–
9100.–
10900.–
12300.–
17000.–
20100.–
25300.–
29700.–
38200.–
49500.–
1LG6183-4PM..
1LG6186-4PM..
1LG6207-4PM..
1LG6220-4PM..
1LG6223-4PM..
1LG6253-4PM..
1LG6280-4PM..
1LG6283-4PM..
1LG6310-4PM..
1LG6313-4PM..
1LG6316-4PM..
1LG6317-4PM..
4960.–
5750.–
7340.–
8740.–
10400.–
12200.–
16700.–
20700.–
25200.–
28400.–
36300.–
43700.–
1LG6186-6PM..
1LG6206-6PM..
1LG6207-6PM..
1LG6223-6PM..
1LG6253-6PM..
1LG6280-6PM..
1LG6283-6PM..
1LG6310-6PM..
1LG6313-6PM..
1LG6316-6PM..
1LG6317-6PM..
1LG6318-6PM..
5820.–
6940.–
7940.–
10300.–
12000.–
14100.–
17700.–
25200.–
28700.–
34000.–
42400.–
51300.–
kW
FS
8-pole: 750 rpm at 50 Hz
11
–
180 L
15
–
200 L
18.5
–
225 S
22
–
225 M
30
–
250 M
37
–
280 S
45
–
280 M
55
–
315 S
75
–
315 M
90
–
315 L
110
–
315 L
132
–
315 L
EUR
1LG6186-8PM..
1LG6207-8PM..
1LG6220-8PM..
1LG6223-8PM..
1LG6253-8PM..
1LG6280-8PM..
1LG6283-8PM..
1LG6310-8PM..
1LG6313-8PM..
1LG6316-8PM..
1LG6317-8PM..
1LG6318-8PM..
6040.–
7600.–
8900.–
10300.–
13200.–
15800.–
18900.–
22500.–
30100.–
35300.–
46700.–
54700.–
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Voltages
Aluminum series 1LE10, 1PC10
■ Selection and ordering data
Voltages
Voltage
code
12th and
13th
position
of the
Article
No.
Additional
identification
code
with
order
code
and
plain
text if
required
1LE1. . . - . . . .
■-■...
1PC1. . . - . . . .
■-■...
Voltage at 50 Hz and 60 Hz
50 Hz 230 VΔ/400 VY,
2 2
–
60 Hz 460 VY 1)
50 Hz 400 VΔ/690 VY,
3 4
–
60 Hz 460 VΔ 1) 2)
50 Hz 400 VΔ, 60 Hz 460 VΔ 2)
50 Hz 400 VY, 60 Hz 460 VY 3) 4) 0 2
50 Hz 500 VY, 60 Hz 575 VY
2 7
–
50 Hz 500 VΔ, 60 Hz 575 VΔ
4 0
–
50 Hz 220 VΔ/380 VY
2 1
–
60 Hz 440 VΔ
3 3
–
50 Hz 380 VΔ/660 VY 2)
60 Hz 440 VΔ
50 Hz 380 VΔ 2)
50 Hz 240 VΔ/415 VY,
2 3
–
60 Hz 480 VY
50 Hz 415 VΔ, 60 Hz 480 VΔ
3 5
–
Voltage at 60 Hz and required output at 60 Hz
220 VΔ/380 VY; 50 Hz output 1)
9 0
M2A
220 VΔ/380 VY; 60 Hz output 1)
9 0
M1A
380 VΔ/660 VY; 50 Hz output 2)
9 0
M2B
380 VΔ; 50 Hz output 2)
380 VΔ/660 VY; 60 Hz output 2)
9 0
M1B
440 VY; 50 Hz output
9 0
M2C
440 VY; 60 Hz output
9 0
M1C
440 VΔ; 50 Hz output
9 0
M2D
440 VΔ; 60 Hz output
9 0
M1D
460 VY; 50 Hz output
9 0
M2E
460 VY; 60 Hz output
9 0
M1E
460 VΔ; 50 Hz output
9 0
M2F
460 VΔ; 60 Hz output
9 0
M1F
575 VY; 50 Hz output
9 0
M2G
575 VY; 60 Hz output
9 0
M1G
575 VΔ; 50 Hz output
9 0
M2H
575 VΔ; 60 Hz output
9 0
M1H
Voltage at 87 Hz and 87 Hz output
400 VΔ 5)
9 0
M3A
Non-standard voltage and/or frequencies
Non-standard winding 6)
9 0
M1Y •
and identification
code


•
–
1)
Motor category
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor version
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
IE2 High Efficiency
1LE1001
1LE1001 $
1PC1001
1PC1001 %
IE3 Premium Efficiency 1LE1003
1LE1003 &
IE1 Standard Efficiency 1LE1002
1LE1002 (
1PC1002
1PC1002 )
NEMA Energy Efficient 1LE1021
1LE1021 Eagle Line *
NEMA Premium Efficient 1LE1023
1LE1023 Eagle Line +
Motor version
Motor
Frame size
type
80
90
100
112
132
160
all
all
all except for * and +
only valid for * and +
all
all
all
all
all
all
all
all
all except for * and +




















–
–
–
–






–
35.30
–
41.40




51.40
62.10
79.70
97.80
35.30
41.40
51.40
62.10
79.70
97.80
only valid for * and +
all
all
–
35.30
–
41.40
51.40
51.40
62.10
62.10
79.70
79.70
97.80
97.80
all
all
35.30
41.40
51.40
62.10
79.70
97.80
all
all except for * and +
all except for * and +
only valid for * and +
all except for * and +
all
all except for * and +
all
all except for * and +
all
all except for * and +
all
all except for * and +
all
all except for * and +
all
all except for * and +
all
35.30
35.30
35.30
–
35.30
35.30
35.30
35.30
35.30
35.30
41.40
41.40
41.40
–
41.40
41.40
41.40
41.40
41.40
41.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80






35.30
41.40
51.40
62.10
79.70
97.80






35.30
35.30
35.30
35.30
41.40
41.40
41.40
41.40
51.40
51.40
51.40
51.40
62.10
62.10
62.10
62.10
79.70
79.70
79.70
79.70
97.80
97.80
97.80
97.80
all
all
35.30
41.40
51.40
62.10
79.70
97.80
all
all
70.80
83.30
103.–
125.–
159.–
198.–
all
all
all
all
all
all
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
Not possible
Frame sizes 80 and 90 for the selected voltages can be ordered even
without motor protection.
5)
Only possible for 4-pole, 6-pole and 8-pole motors. The operating data for
converter-fed operation is also provided in a table on the rating plate.
2)
For North America export versions Eagle Line 1LE1021 NEMA Energy
Efficient and 1LE1023 NEMA Premium Efficient, voltages above 600 V
will not be stamped.
6)
Plain text must be specified in the order: Voltage between 200 and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
3)
Shaft heights 80 and 90 with voltage code 02 are only available without
motor protection (motor protection code A).
4)
Delta connection is not possible.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/39
2
© Siemens AG 2015
SIMOTICS GP 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Voltages
Aluminum series 1LE1011, 1LE1012 – pole-changing
10
On
request
20
■ Selection and ordering data
Voltages
2
Voltage
code
12th and
13th
position
of the
Article
No.
1LE1. . . - . . . . ■ - ■ . . .
Voltage at 50 Hz and 50 Hz output
230 V
2 2
400 V
3 4
500 V
4 0
690 V
4 7
Voltage at 60 Hz and required output
220 V; 50 Hz output
9 0
220 V; 60 Hz output
9 0
380 V; 50 Hz output
9 0
380 V; 60 Hz output
9 0
440 V; 50 Hz output
9 0
440 V; 60 Hz output
9 0
460 V; 50 Hz output
9 0
460 V; 60 Hz output
9 0
575 V; 50 Hz output
9 0
575 V; 60 Hz output
9 0
Non-standard voltage and/or frequencies
Non-standard winding 1)
9 0


•
1)
Additional
identification
code
with
order
code
and
plain
text if
required
Motor category
Motor version
Motor type
(alum.)
Pole-changing
1LE1011
1LE1012
Motor type
Motor version
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
100
112
132
160
1LE1011
1LE1012
Frame size
100
112
132
160
–
–
–
–
all
all
all
all
all
all
all
all
















M5K
M5C
M5L
M5D
M5M
M5E
M5N
M5F
M5P
M5G
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80
M1Y •
all
and identification
code
all
103.–
125.–
159.–
198.–
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
Plain text must be specified in the order: Voltage between 200 and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
2/40
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Standard delivery times in working days:
10
20
Supplements to article numbers and special versions
On
request
Voltages
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
■ Selection and ordering data
Voltages
Voltage
code
12th and
13th
position
of the
Article
No.
1LE1. . . - . . . . ■ - ■ . . .
Voltage at 50 Hz and 60 Hz
2 2
50 Hz 230 VΔ/400 VY,
60 Hz 460 VY
50 Hz 400 VΔ/690 VY,
3 4
60 Hz 460 VΔ 1)
50 Hz 400 VΔ,
60 Hz 460 VΔ 1)
50 Hz 500 VY
2 7
50 Hz 500 VΔ
4 0
50 Hz 220 VΔ/380 VY,
2 1
60 Hz 440 VΔ
3 3
50 Hz 380 VΔ/660 VY,
60 Hz 440 VΔ 1)
1)
50 Hz 380 VΔ
Additional
identification
code
with
order
code
and plain
text if
required
315
2
315
–
all













–
all except ), *, + and , 

























–
–
–
only valid for ), *, +
and ,
all
all
all
all
all
all













–
all except ), *, + and , 31.20 35.30 41.40 51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
2 3
–
50 Hz 240 VΔ/415 VY,
60 Hz 480 VY
50 Hz 415 VΔ,
3 5
–
60 Hz 480 VΔ
Voltage at 60 Hz and required output
9 0
M2A
220 VΔ/380 VY;
50 Hz output
9 0
M1A
220 VΔ/380 VY;
60 Hz output 2)
9 0
M2B
380 VΔ/660 VY;
50 Hz output 1)
380 VΔ; 50 Hz output 1)
9 0
M1B
380 VΔ/660 VY;
60 Hz output 1) 2)
9 0
M2C
440 VY; 50 Hz output
M1C
440 VY; 60 Hz output 2) 9 0
9 0
M2D
440 VΔ; 50 Hz output
M1D
440 VΔ; 60 Hz output 2) 9 0
9 0
M2E
460 VY; 50 Hz output
M1E
460 VY; 60 Hz output 2) 9 0
460 VΔ; 50 Hz output
9 0
M2F
M1F
460 VΔ; 60 Hz output 2) 9 0
575 VY; 50 Hz output
9 0
M2G
M1G
575 VY; 60 Hz output 2) 9 0
9 0
M2H
575 VΔ; 50 Hz output
M1H
575 VΔ; 60 Hz output 2) 9 0
Voltage at 87 Hz and 87 Hz output
9 0
M3A
400 VΔ 3)
Non-standard voltage and/or frequencies
M1Y •
Non-standard winding 4) 9 0
and
identification
code


Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor version Motor type Motor type – Frame size
(cast-iron) 71
80
90
100 112 132 160 180 200 225 250 280
IE2 High
1LE1501
1LE1501 Basic Line $
Efficiency
1LE1601
1LE1601 Performance Line %
IE3 Premium
1LE1503
1LE1503 Basic Line &
Efficiency
1LE1603
1LE1603 Performance Line (
NEMA Energy 1LE1521
1LE1521 Eagle Line Basic )
Efficient
1LE1621
1LE1621 Eagle Line Performance *
NEMA Premium 1LE1523
1LE1523 Eagle Line Basic +
Efficient
1LE1623
1LE1623 Eagle Line Performance ,
Motor
Motor
Frame size
version
type
71
80
90
100 112 132 160 180 200 225 250 280
all
–
–
–










31.20 35.30 41.40 51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
only valid for ), *, + and 31.20 35.30 41.40 51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
,
all
all
31.20 35.30 41.40 51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
31.20 35.30 41.40 51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
–
–
–
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all except ), *, + and , 31.20 35.30 41.40 51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all except ), *, + and , –
–
–
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
only valid for ), *, +
–
and ,
all except ), *, + and , –
–
–
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
–
–
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
all except ), *, + and ,
all
all
all except ), *, + and ,
all
all
all except ), *, + and ,
all
all
all except ), *, + and ,
all
all
all except ), *, + and ,
all
all
all except ), *, + and ,
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
51.40
51.40
51.40
51.40
51.40
62.10
62.10
62.10
62.10
62.10
79.70
79.70
79.70
79.70
79.70
97.80
97.80
97.80
97.80
97.80
132.–
132.–
132.–
132.–
132.–
151.–
151.–
151.–
151.–
151.–
205.–
205.–
205.–
205.–
205.–
234.–
234.–
234.–
234.–
234.–
302.–
302.–
302.–
302.–
302.–
392.–
392.–
392.–
392.–
392.–










all
all
–
–
–
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
62.40 70.80 83.30 103.– 125.– 159.– 198.– 255.– 311.– 460.– 580.– 742.– 964.–
Standard version
Without additional charge
1)
For North America export versions Eagle Line 1LE1521/1LE1621 NEMA
Energy Efficient and 1LE1523/1LE1623 NEMA Premium Efficient, voltages
above 600 V will not be stamped.
2)
Not admissible for North America export versions Eagle Line 1LE1521/
1LE1621 NEMA Energy Efficient and 1LE1523/1LE1623 NEMA Premium
Efficient.
Recommended retail prices plus metal surcharges (MS)
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–










51.40
51.40
51.40
51.40
62.10
62.10
62.10
62.10
79.70
79.70
79.70
79.70
97.80
97.80
97.80
97.80
132.–
132.–
132.–
132.–
151.–
151.–
151.–
151.–
205.–
205.–
205.–
205.–
234.–
234.–
234.–
234.–
302.–
302.–
302.–
302.–
392.–
392.–
392.–
392.–
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
3)
Only possible for 4-pole, 6-pole and 8-pole motors. The operating data for
converter-fed operation is also provided in a table on the rating plate.
4)
Plain text must be specified in the order: Voltage between 200 and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
Siemens D 81.1 P · 03/2015
2/41
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Voltages – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
10
On
request
20
■ Selection and ordering data
Voltages
Voltage
code
11th
position
of the
Article
No.
Additional
identification
code
with
order
code
and
plain
text if
required
2
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
Motor type Motor type – Frame size
version
(alum.)
63
71
80
90
100
112
132
160
180
200
IE2 High
1LA9
1LA9 $
Efficiency
IE3 Premium –
Efficiency
IE1 Standard 1LA7/1LA5 1LA7 %
1LA5 &
Efficiency
1LA9
1LA9 with increased output (
1PP7/1PP5 1PP7 )
1PP5 *
1LP7/1LP5 1LP7 +
1LP5 ,
NEMA Energy 1LA9
1LA9 Efficient
NEMA
–
Premium
Efficient
Motor
Motor
Frame size
version
type
63
71
80
90
100
112
132
160
180
200
1L . . . . . - . . . ■ .
1PP . . . . - . . . ■ .
Voltage at 50 Hz and 60 Hz
50 Hz 230 VΔ/400 VY,
1
–
all
60 Hz 460 VY
50 Hz 400 VΔ/690 VY,
6
–
all except 60 Hz 460 VΔ 1)
Voltage at 50 Hz and 50 Hz output
500 VY
3
–
all
500 VΔ
5
–
all
220 VΔ/380 VY
9
L1R
all
(440 VY at 60 Hz)
230 VΔ
9
L1E
all
380 VΔ/660 VY
9
L1L
all except 1)
(440 VΔ at 60 Hz)
9
L1C
all
415 VY
415 VΔ
9
L1D
all
400 VY
9
L1A
all
400 VΔ
9
L1B
all
400 VΔ
9
L1U
all
(460 VΔ at 60 Hz)
Voltage at 60 Hz and required output
220 VΔ/380 VY;
9
L2A
all
50 Hz output
9
L2B
all except 220 VΔ/380 VY;
60 Hz output 2)
380 VΔ/660 VY;
9
L2C
all except 50 Hz output 1)
9
L2D
all except 380 VΔ/660 VY;
60 Hz output 1) 2)
440 VY; 50 Hz output
9
L2Q
all
440 VY; 60 Hz output 2) 9
L2W
all except 440 VΔ; 50 Hz output
9
L2R
all
2)
9
L2X
all except 440 VΔ; 60 Hz output
460 VY; 50 Hz output
9
L2S
all
460 VY; 60 Hz output 2)
9
L2E
all except 460 VΔ; 50 Hz output
9
L2T
all
460 VΔ; 60 Hz output 2) 9
L2F
all except 575 VY; 50 Hz output
9
L2U
all
575 VY; 60 Hz output 2) 9
L2L
all except 9
L2V
all
575 VΔ; 50 Hz output
2)
575 VΔ; 60 Hz output
9
L2M
all except Multi-voltage at 60 Hz and required output at 60 Hz
230 VYY/460 VY 60 Hz; 9
L3E
all
50 Hz output, 9 main
terminals and electrical
design to NEMA 3)
L3F
all
230 VYY/460 VY 60 Hz; 9
60 Hz output, 9 main
terminals and electrical
design to NEMA 3)
L3G
all
230 VΔΔ/460 VΔ 60 Hz; 9
50 Hz output, 12 main
terminals and electrical
design to NEMA 3)
230 VΔΔ/460 VΔ 60 Hz; 9
L3H
all
60 Hz output, 12 main
terminals and electrical
design to NEMA 3)
Non-standard voltage and/or frequencies
Non-standard winding 4) 9
L1Y •
all
and
identification
code
all
225
225




































132.–
152.–
213.–
all
all
all
–
–
–
–




27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.–
all




27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.–
132.–
152.–
213.–
all
all
all
all
all
27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.–
27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.–
132.–
132.–
152.–
152.–
213.–
213.–












all
27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.–
132.–
152.–
213.–
27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.–
132.–
152.–
213.–
27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.–
132.–
152.–
213.–
27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.–
132.–
152.–
213.–
27.80
27.80
27.80
27.80
27.80
32.40
32.40
32.40
32.40
32.40
36.70
36.70
36.70
36.70
36.70
43.10
43.10
43.10
43.10
43.10
53.50
53.50
53.50
53.50
53.50
64.60
64.60
64.60
64.60
64.60
82.90
82.90
82.90
82.90
82.90
102.–
102.–
102.–
102.–
102.–
132.–
132.–
132.–
132.–
132.–
152.–
152.–
152.–
152.–
152.–
213.–
213.–
213.–
213.–
213.–








all
all
all































27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.–
132.–
152.–
213.–











27.80
27.80
27.80
27.80
32.40
32.40
32.40
32.40
36.70
36.70
36.70
36.70
43.10
43.10
43.10
43.10
53.50
53.50
53.50
53.50
64.60
64.60
64.60
64.60
82.90
82.90
82.90
82.90
102.–
102.–
102.–
102.–
132.–
132.–
132.–
132.–
152.–
152.–
152.–
152.–
213.–
213.–
213.–
213.–
all
130.–
130.–
152.–
171.–
202.–
236.–
290.–
349.–
443.–
531.–
–
all
130.–
130.–
152.–
171.–
202.–
236.–
290.–
349.–
443.–
531.–
–
all
–
–
–
–
298.–
335.–
375.–
411.–
628.–
771.–
–
all
–
–
–
–
298.–
335.–
375.–
411.–
628.–
771.–
–
all
55.20 64.90 73.60 86.60 107.–
130.–
165.–
206.–
265.–
323.–
478.–
all
all
all
For legends and footnotes, see Page 2/43.
2/42
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
Voltages
On
request
Voltage
code
11th
position
of the
Article
No.
Voltages – Aluminum series
1LA7, 1LA5 – pole-changing and for converter-fed oper. only
Additional
identification
code
with
order
code
and
plain
text if
required
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
Motor type Motor type – Frame size
version
(alum.)
63
71
80
90
100
112
132
160
180
200
Pole1LA7/1LA5 1LA7
1LA5
changing
Motor
version
1LA . . . . - . . . ■ .
Voltage at 50 Hz and 50 Hz output, direct switch-on
230 V
1
–
all
400 V
6
–
all
500 V
5
–
all
690 V
0
–
all
Voltage at 60 Hz and required output at 60 Hz
220 V; 50 Hz output
9
L4A
all
220 V; 60 Hz output
9
L4B
all
380 V; 50 Hz output
9
L4C
all
380 V; 60 Hz output
9
L4D
all
440 V; 50 Hz output
9
L4G
all
440 V; 60 Hz output
9
L4E
all
460 V; 50 Hz output
9
L4J
all
460 V; 60 Hz output
9
L4H
all
575 V; 50 Hz output
9
L4N
all
575 V; 60 Hz output
9
L4M
all
Non-standard voltage and/or frequencies
Non-standard winding 4)
9
L1Y • and all
identification code
9
L3Y • and all
Non-standard winding for
identificaΔ/Y starting at the lower
tion code
speed 4)
Voltages
Voltage
code
11th
position
of the
Article
No.
Additional
identification
code
with
order
code
and
plain
text if
required
1LA . . . . - . . . ■ .
Voltage at 50 Hz and 50 Hz output
500 VY
3
–
500 VΔ
5
–
690 VY
8
–
400 VY
9
L1A
400 VΔ
9
L1B
Non-standard voltage and/or frequencies
Non-standard winding 4) 5)
9
L1Y • and
identification code


•
–
Motor
type
Frame size
63
71
80
90
100
112
132
160
180
200
all
all
all
all








































all
all
all
all
all
all
all
all
all
all
26.70
26.70
26.70
26.70
26.70
26.70
26.70
26.70
26.70
26.70
31.20
31.20
31.20
31.20
31.20
31.20
31.20
31.20
31.20
31.20
35.30
35.30
35.30
35.30
35.30
35.30
35.30
35.30
35.30
35.30
41.40
41.40
41.40
41.40
41.40
41.40
41.40
41.40
41.40
41.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80
127.–
127.–
127.–
127.–
127.–
127.–
127.–
127.–
127.–
127.–
146.–
146.–
146.–
146.–
146.–
146.–
146.–
146.–
146.–
146.–
all
55.20
64.90
73.60
86.60
107.–
130.–
165.–
206.–
265.–
323.–
all
–
–
–
–
156.–
187.–
242.–
296.–
386.–
473.–
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
Motor type Motor type – Frame size
version
(alum.)
100
112
132
160
180
200
225
For con1LA7/1LA5 1LA7
1LA5
verterfed
operation
only
Motor
Motor type Frame size
version
100
112
132
160
180
200
225
all
all
all
all
all
all
all
all
all
all



































all
all
107.–
130.–
165.–
206.–
265.–
323.–
478.–
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
Not possible
1)
For the North America export version of 1LA9 with order code D42 NEMA
Energy Efficient, voltages above 600 V will not be stamped.
2)
Not admissible in combination with order code D42 NEMA Energy
Efficient.
3)
When ordering with the brake option (order code G26), only 6 motor
connection terminals are possible for 1LA7 motors of frame sizes 63 to 90.
Recommended retail prices plus metal surcharges (MS)
4)
Plain text must be specified in the order: Voltage between 200 V and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
5)
60 Hz data is not admissible on the rating plate.
Siemens D 81.1 P · 03/2015
2/43
2
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Voltages
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
10
20
On
request
■ Selection and ordering data
Voltages
Voltage
code
11th
position
of the
Article
No.
Additional
identification
code
with
order
code
and
plain
text if
required
2
1L . . . . . - . . . ■ .
1PP4 . . . - . . . ■ .
Voltage at 50 Hz and 60 Hz
50 Hz 230 VΔ/400 VY,
1
–
60 Hz 460 VY
50 Hz 400 VΔ/690 VY,
6
–
60 Hz 460 VΔ 1)
Voltage at 50 Hz and 50 Hz output
500 VY
3
–
500 VΔ
5
–
220 VΔ/380 VY
9
L1R
(440 VY at 60 Hz)
230 VΔ
9
L1E
380 VΔ/660 VY
9
L1L
1)
(440 VΔ at 60 Hz)
415 VY
9
L1C
415 VΔ
9
L1D
400 VY
9
L1A
400 VΔ
9
L1B
400 VΔ
9
L1U
(460 VΔ at 60 Hz)
Voltage at 60 Hz and required output
220 VΔ/380 VY;
9
L2A
50 Hz output
220 VΔ/380 VY;
9
L2B
60 Hz output 2)
380 VΔ/660 VY;
9
L2C
50 Hz output 1)
380 VΔ/660 VY;
9
L2D
60 Hz output 1) 2)
440 VY; 50 Hz output
9
L2Q
440 VY; 60 Hz output 2)
9
L2W
440 VΔ; 50 Hz output
9
L2R
440 VΔ; 60 Hz output 2)
9
L2X
460 VY; 50 Hz output
9
L2S
460 VY; 60 Hz output 2)
9
L2E
460 VΔ; 50 Hz output
9
L2T
460 VΔ; 60 Hz output 2)
9
L2F
575 VY; 50 Hz output
9
L2U
575 VY; 60 Hz output 2)
9
L2L
575 VΔ; 50 Hz output
9
L2V
575 VΔ; 60 Hz output 2)
9
L2M
Non-standard voltage and/or frequencies
Non-standard winding 3) 9
L1Y •
and
identification
code
Motor category
Motor
Motor
version
type
(castiron)
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
112
132
160
180
200
225
250
280
315
S/M
315 L
1LG6 $
1LG6
1LG6 %
1LG6
1LA6/
1LG4
1PP4
1LP4
NEMA Energy 1LG6
Efficient
NEMA
1LG6
Premium
Efficient
Motor
Motor
version
type
1LA6 &
Frame size
100
112
132
160
180
200
225
250
280
315
S/M
315 L
all











all except + and ,











all
all
all




all
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6
,







–
–
–
–
53.50 64.60 82.90 102.–







137.–
157.–
213.–
243.–
314.–
408.–
–
all
all
all except + and ,







53.50 64.60 82.90 102.–
137.–
157.–
213.–
243.–
314.–
408.–
–
408.–
all
all
all
all
all
all
all
all
all
all
53.50 64.60 82.90 102.–
53.50 64.60 82.90 102.–
137.–
137.–
157.–
157.–
213.–
213.–
243.–
243.–
314.–
314.–
408.–
408.–










–
408.–
–






















all
all
53.50 64.60 82.90 102.–
137.–
157.–
213.–
243.–
314.–
408.–
–
all except + and ,
53.50 64.60 82.90 102.–
137.–
157.–
213.–
243.–
314.–
408.–
–
all except + and ,
53.50 64.60 82.90 102.–
137.–
157.–
213.–
243.–
314.–
408.–
408.–
all except + and ,
53.50 64.60 82.90 102.–
137.–
157.–
213.–
243.–
314.–
408.–
408.–
all
all
all except + and ,
all
all
all except + and ,
all
all
all except + and ,
all
all
all except + and ,
all
all
all except + and ,
all
all
all except + and ,
53.50
53.50
53.50
53.50
53.50
64.60
64.60
64.60
64.60
64.60
82.90
82.90
82.90
82.90
82.90
102.–
102.–
102.–
102.–
102.–
137.–
137.–
137.–
137.–
137.–
157.–
157.–
157.–
157.–
157.–
213.–
213.–
213.–
213.–
213.–
243.–
243.–
243.–
243.–
243.–
314.–
314.–
314.–
314.–
314.–
408.–
408.–
408.–
408.–
408.–




all
all
all
all
all









53.50 64.60 82.90 102.–
137.–
157.–
213.–
243.–
314.–
408.–
–
–
408.–
408.–
–
–
408.–








53.50 64.60 82.90 102.–
53.50 64.60 82.90 102.–
53.50 64.60 82.90 102.–
137.–
137.–
137.–
157.–
157.–
157.–
213.–
213.–
213.–
243.–
243.–
243.–
314.–
314.–
314.–
408.–
408.–
408.–
–
–
408.–











107.–
130.–
165.–
206.–
265.–
323.–
478.–
603.–
772.–
1000.–
1000.–



For legends and footnotes, see Page 2/45.
2/44
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LG Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
Voltages
On
request
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
Motor
Motor type – Frame size
version
type
(cast-iron)
180
200
225
250
280
315
315 L
S/M
Pole1LG4
1LG4
changing
Motor
Motor
Frame size
version
type
180
200
225
250
280
315
315 L
1LG4 . . . - . . . ■ .
S/M
Voltage at 50 Hz and 50 Hz output, direct switch-on
230 V
1
–
all
all







400 V
6
–
all
all







500 V
5
–
all
all







690 V
0
–
all
all







Voltage at 60 Hz and required output
220 V; 50 Hz output
9
L4A
all
all
132.–
151.–
205.–
234.–
302.–
392.–
392.–
220 V; 60 Hz output
9
L4B
all
all
132.–
151.–
205.–
234.–
302.–
392.–
392.–
380 V; 50 Hz output
9
L4C
all
all
132.–
151.–
205.–
234.–
302.–
392.–
392.–
380 V; 60 Hz output
9
L4D
all
all
132.–
151.–
205.–
234.–
302.–
392.–
392.–
440 V; 50 Hz output
9
L4G
all
all
132.–
151.–
205.–
234.–
302.–
392.–
392.–
440 V; 60 Hz output
9
L4E
all
all
132.–
151.–
205.–
234.–
302.–
392.–
392.–
460 V; 50 Hz output
9
L4J
all
all
132.–
151.–
205.–
234.–
302.–
392.–
392.–
460 V; 60 Hz output
9
L4H
all
all
132.–
151.–
205.–
234.–
302.–
392.–
392.–
575 V; 50 Hz output
9
L4N
all
all
132.–
151.–
205.–
234.–
302.–
392.–
392.–
575 V; 60 Hz output
9
L4M
all
all
132.–
151.–
205.–
234.–
302.–
392.–
392.–
Non-standard voltage and/or frequencies
Non-standard winding 3)
9
L1Y • and all
all
265.–
323.–
478.–
603.–
772.–
1000.–
1000.–
identification code
Voltages
Voltage
code
11th
position
of the
Article
No.
Voltages – Cast-iron series
1LG4 – pole-changing, 1LG6 – for converter-fed oper. only
Voltage
code
11th
position
of the
Article
No.
Additional
identification
code with
order code
and
plain text
if required
Additional
identification
code with
order code
and
plain text
if required
1LG6 . . . - . . . ■ .
Voltage at 50 Hz and 50 Hz output
500 VY
3
–
500 VΔ
5
–
690 VY
8
–
400 VY
9
L1A
400 VΔ
9
L1B
Non-standard voltage and/or frequencies
Non-standard winding 3) 4) 5) 9
L1Y • and
identification code


•
–
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor verMotor
Motor type – Frame size
sion
type
(cast-iron)
180
200
225
250
280
315
315 L
S/M
For con1LG6
1LG6
verterfed
operation
only
Motor version Motor type Frame size
180
200
225
250
280
315
315 L
S/M
all
all
all
all
all
all
all
all
all
all



































all
all
265.–
323.–
478.–
603.–
772.–
1000.–
1000.–
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
Not possible
1)
For the North America export version of 1LG6 with order code D42 NEMA
Energy Efficient or D42 NEMA Energy Efficient, voltages above 600 V will
not be stamped.
3)
Plain text must be specified in the order: Voltage between 200 V and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
2)
Not admissible in combination with order codes D41 NEMA
Premium Efficient or D42 NEMA Energy Efficient.
4)
Please inquire in the case of 1LG6 motors of frame size 315 for voltages in
the 200 V range.
5)
60 Hz data is not admissible on the rating plate.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/45
2
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Aluminum series 1LE10, 1PC10
10
20
On
request
■ Selection and ordering data
Types of
construction
Type
of
construction
code
14th
position
of the
Article
No.
For types
of construction
with order
code(s)
Article No.
with
additional
identification code
-Z
2
1LE1. . . - . . . . . - . ■ . . (-Z)
1PC1. . . - . . . . . - . ■ . . (-Z)
Without flange
IM B3 1) 2) 3)
A
–
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
1LE1001
1LE1001 $
1PC1001
1PC1001 %
1LE1003
1LE1003 &
132
160
1LE1002 (
1PC1002 )
1LE1002
1PC1002
1LE1021
NEMA Energy
1LE1021 Eagle Line *
Efficient
NEMA Premium 1LE1023
1LE1023 Eagle Line +
Efficient
Pole-changing 1LE1011
1LE1012
Motor version
Motor type Frame size
80
90
1LE1011 ,
1LE1012 100
112
132
160
all except *






IM B6 2) 3)
T
–
all except *






IM B7 2) 3)
U
–
all except *






IM B8 2) 3)
V
–
all except *






IM V6 2) 3)
D
–
all except *






IM V5
without
protective
cover
C
–
all except *






C
H00
all except %, ), *
and in combination with
order code F90
54.–
54.–
78.40
78.40
137.–
137.–
2) 3)
IM V5
with
protective
cover
2) 3) 4) 5) 6)
For legends and footnotes, see Page 2/50.
2/46
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
Types of
construction
On
request
Type
of
construction
code
14th
position
of the
Article
No.
Types of construction
Aluminum series 1LE10, 1PC10
For types
of construction
with order
code(s)
Article No.
with
additional
identification code
-Z
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
1LE1001
1LE1001 $
1PC1001
1PC1001 %
1LE1003
1LE1003 &
G
–
all
IM V1
with
protective
cover
G
H00
IM V3 4)
H
IM B35 3)
J
With special flange
of next larger size
acc. to DIN EN 50347
acc. to DIN 42948
F
P01
all
all
all
160
1LE1002 (
1PC1002 )
1LE1002
1PC1002
1LE1021
NEMA Energy
1LE1021 Eagle Line *
Efficient
NEMA Premium 1LE1023
1LE1023 Eagle Line +
Efficient
Pole-changing 1LE1011
1LE1012
1LE1. . . - . . . . . - . ■ . . (-Z)
Motor version
Motor type Frame size
1PC1. . . - . . . . . - . ■ . . (-Z)
80
90
With flange
acc. to DIN EN 50347
FF165
FF165
acc. to DIN 42948
A 200
A 200
IM B5 2) 7)
F
–
all
all
52.10
62.50
IM V1
without
protective
cover 2)
132
2
1LE1011 ,
1LE1012 100
FF215
A 250
77.40
112
FF215
A 250
96.10
132
FF265
A 300
125.–
160
FF300
A 350
162.–
52.10
62.50
77.40
96.10
125.–
162.–
all except %, )
and in combination with
order code F90
106.10
116.50
155.80
174.50
262.–
299.–
–
all
52.10
62.50
77.40
96.10
125.–
162.–
–
all except *
69.90
79.90
96.10
126.–
158.–
228.–
all
FF215
A 250
–
FF215
A 250
–
FF265
A 300
122.80
FF265
A 300
141.50
FF300
A 350
181.70
–
–
–
all
–
–
122.80
141.50
181.70
–
–
–
279.60
309.60
455.70
–
–
–
122.80
141.50
181.70
–
–
–
141.50
182.70
214.70
–
2) 4) 5) 6)
IM B5 2) 7)
all
IM V1
without
protective
cover 2)
G
P01
IM V1
with
protective
cover
G
P01+H00 all except %, )
and in combination with
order code F90
IM V3 4)
H
P01
all
IM B35 3)
J
P01
all except *
2) 4) 5) 6)
all
For legends and footnotes, see Page 2/50.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/47
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Aluminum series 1LE10, 1PC10
Types of
construction
2
Type
of
construction
code
14th
position
of the
Article
No.
For types
of construction
with order
code(s)
Article No.
with
additional
identification code
-Z
10
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
On
request
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
1LE1001
1LE1001 $
1PC1001
1PC1001 %
1LE1003
1LE1003 &
all
132
160
1LE1002 (
1PC1002 )
1LE1002
1PC1002
1LE1021
NEMA Energy
1LE1021 Eagle Line *
Efficient
NEMA Premium 1LE1023
1LE1023 Eagle Line +
Efficient
Pole-changing 1LE1011
1LE1012
1LE1. . . - . . . . . - . ■ . . (-Z)
Motor version
Motor type Frame size
1PC1. . . - . . . . . - . ■ . . (-Z)
80
90
With special flange
acc. to DIN EN 50347
–
–
of next smaller size
acc. to DIN 42948
–
–
IM B5 2) 7)
F
P02
all
all
–
–
all
20
1LE1011 ,
1LE1012 100
FF165
A 200
O.R.
112
FF165
A 200
O.R.
132
FF215
A 250
O.R.
160
FF265
A 300
O.R.
–
–
O.R.
O.R.
O.R.
O.R.
–
–
O.R.
O.R.
O.R.
O.R.
–
–
O.R.
O.R.
O.R.
O.R.
–
–
O.R.
O.R.
O.R.
O.R.
all
FT100
C 120
52.10
FT115
C 140
62.50
FT130
C 160
77.40
FT130
C 160
96.10
FT165
C 200
125.–
FT215
C 250
162.–
all
all
52.10
62.50
77.40
96.10
125.–
162.–
–
all
all
52.10
62.50
77.40
96.10
125.–
162.–
M
H00
all except %, )
and in combination with
order code F90
106.10
116.50
155.80
174.50
262.–
299.–
N
–
all except *
69.90
79.90
96.10
126.–
158.–
228.–
IM V1
without
protective
cover 2)
G
P02
IM V1
with
protective
cover
G
P02+H00 all except %, )
and in combination with
order code F90
IM V3 4)
H
P02
all
IM B35 3)
J
P02
all except *
With standard flange
IM B14 2) 8)
acc. to DIN EN 50347
acc. to DIN 42948
K
–
all
IM V19 2)
L
–
IM V18
without
protective
cover 2)
M
IM V18
with
protective
cover
2) 4) 5) 6)
all
2) 4) 5) 6)
IM B34 3)
For legends and footnotes, see Page 2/50.
2/48
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
Types of
construction
On
request
Type
of
construction
code
14th
position
of the
Article
No.
Types of construction
Aluminum series 1LE10, 1PC10
For types
of construction
with order
code(s)
Article No.
with
additional
identification code
-Z
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
1LE1001
1LE1001 $
1PC1001
1PC1001 %
1LE1003
1LE1003 &
132
160
1LE1002 (
1PC1002 )
1LE1002
1PC1002
1LE1021
NEMA Energy
1LE1021 Eagle Line *
Efficient
NEMA Premium 1LE1023
1LE1023 Eagle Line +
Efficient
Pole-changing 1LE1011
1LE1012
1LE1. . . - . . . . . - . ■ . . (-Z)
Motor version
Motor type Frame size
1PC1. . . - . . . . . - . ■ . . (-Z)
80
90
With special flange
acc. to DIN EN 50347
FT130
FT130
of next larger size
acc. to DIN 42948
C 160
C 160
IM B14 2) 8)
K
P01
all
all
97.50
107.90
2
1LE1011 ,
1LE1012 100
FT165
C 200
122.80
112
FT165
C 200
141.50
132
FT215
C 250
181.70
160
–
–
–
IM V19 2)
L
P01
all
all
97.50
107.90
122.80
141.50
181.70
–
IM V18
without
protective
cover 2)
M
P01
all
all
97.50
107.90
122.80
141.50
181.70
–
IM V18
with
protective
cover
M
P01+H00
all except %, )
and in combination with
order code F90
151.50
161.90
201.20
219.90
318.70
–
N
P01
all except *
115.30
125.30
141.50
171.40
214.70
–
2) 4) 5) 6)
IM B34 3)
For legends and footnotes, see Page 2/50.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/49
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Aluminum series 1LE10, 1PC10
Types of
construction
2
Type
of
construction
code
14th
position
of the
Article
No.
For types
of construction
with order
code(s)
Article No.
with
additional
identification code
-Z
10
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
20
On
request
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
1LE1001
1LE1001 $
1PC1001
1PC1001 %
1LE1003
1LE1003 &
132
160
1LE1002 (
1PC1002 )
1LE1002
1PC1002
1LE1021
NEMA Energy
1LE1021 Eagle Line *
Efficient
NEMA Premium 1LE1023
1LE1023 Eagle Line +
Efficient
Pole-changing 1LE1011
1LE1012
1LE1. . . - . . . . . - . ■ . . (-Z)
Motor version
Motor type Frame size
1PC1. . . - . . . . . - . ■ . . (-Z)
80
90
With special flange
acc. to DIN EN 50347
FT105
FT100
of next smaller size
acc. to DIN 42948
C 105
C 120
IM B14 2) 8)
K
P02
all
all
–
–
1LE1011 ,
1LE1012 100
FT115
C 140
O. R.
112
FT115
C 140
O. R.
132
FT130
C 160
O. R.
160
FT165
C 200
O. R.
IM V19 2)
L
P02
all
all
–
–
O. R.
O. R.
O. R.
O. R.
IM V18
without
protective
cover 2)
M
P02
all
all
–
–
O. R.
O. R.
O. R.
O. R.
IM V18
with
protective
cover
M
P02+H00
all except %, )
and in combination with
order code F90
–
–
O. R.
O. R.
O. R.
O. R.
N
P02
all except *
–
–
O. R.
O. R.
O. R.
O. R.
2) 4) 5) 6)
IM B34 3)
Standard version
–
Not possible
O. R. Possible on request

1)
2)
The types of construction IM B6/7/8, IM V6 and IM V5 with/without protective cover are also possible as long as no condensation drainage holes
(order code H03) and no stamping of these types of construction on the
rating plate are required. As standard the type of construction IM B3 is
then stamped on the rating plate. With type of construction IM V5 with
protective cover, the protective cover has to be additionally ordered with
order code H00. The protective cover is not stamped on the rating plate.
The type of construction is stamped on the rating plate. When ordering
with condensation drainage holes (order code H03), if mounted in a
different position, the position must be specified to ensure that the condensation drainage holes are positioned correctly.
3)
For North America export version Eagle Line 1LE1021 NEMA Energy
Efficient, types of construction with feet are not possible for 2-pole, 4-pole
and 6-pole motors ≤ 200 hp in accordance with NEMA MG1 Table 12-11.
4)
The "Second shaft extension" option (order code L05) is not possible.
5)
In combination with an encoder it is not necessary to order the protective
cover (order code H00), as this is delivered as a protection for the encoder
as standard. In this case the protective cover is standard version (without
additional charge).
2/50
Siemens D 81.1 P · 03/2015
6)
Not possible for 1PC1 naturally cooled motors and 1LE1 forced-air cooled
motors with order code F90 without external fan and fan cover.
7)
The types of construction IM V3 and IM V1 with/without protective cover
are also possible as long as no condensation drainage holes (order code
H03) and no stamping of these types of construction on the rating plate
are required. As standard the type of construction IM B5 is then stamped
on the rating plate. With type of construction IM V1 with protective cover,
the protective cover has to be additionally ordered with order code H00.
The protective cover is not stamped on the rating plate.
8)
The types of construction IM V19 and IM V18 with/without protective cover
are also possible as long as no condensation drainage holes (order code
H03) and no stamping of these types of construction on the rating plate
are required. As standard the type of construction IM B14 is then stamped
on the rating plate. With type of construction IM V18 with protective cover,
the protective cover has to be additionally ordered with order code H00.
The protective cover is not stamped on the rating plate.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Types of construction
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
■ Selection and ordering data
Types of
construction
Type
of
construction
code
14th
position
of
the
Article
No.
For
types
of construction
with
order
code(s)
Article
No.
with
additional
identification
code
if required
-Z
1LE1. . . - . . . . . - . ■ . . (-Z)
Without flange
IM B3
A
–
1) 2) 3)
IM B6
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version
type
132
160
180
200
225
250
280
315
S/M
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
2
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
Frame size
71
80
90
100
112
132
160
180
200
225
250
280
315
S/M
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
all, except ), *

2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp
all, except ), *

2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp




























–
all, except ), *

2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp














V
–
all, except ), *

2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp














D
–
all, except ), *

2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp












437.– 
C
–
all, except ), *

2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp












437.– 
C
H00
all, except ), *
54.– 54.– 54.– 78.40 78.40 137.–
2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp
2) 3)
IM V5
without
protective
cover
Motor type – Frame size
71
80
90
100
112
Motor
type
(castiron)
U
2) 3)
IM V6
Motor
version
–
2) 3)
IM B8
Additional charges plus MS EUR, standard delivery time (colored area)
T
2) 3)
IM B7
Motor category
2) 3)
IM V5
with
protective
cover
137.– 183.– 275.– 364.– 455.– 546.– 729.– 729.– 729.–
2) 3) 4) 5)
For legends and footnotes, see Page 2/54.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/51
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
Types of
construction
Type
of
construction
code
14th
position
of
the
Article
No.
2
For
types
of construction
with
order
code(s)
Article
No.
with
additional
identification
code
if required
-Z
10
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
version
Motor type – Frame size
71
80
90
100
112
Motor
type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version
type
1LE1. . . - . . . . . - . ■ . . (-Z)
With flange
acc. to DIN EN 50347
acc. to DIN 42948
IM B5
F
–
all
132
160
180
200
On
request
20
225
250
280
315
S/M
225
250
280
315
S/M
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
Frame size
71
80
90
100
112
132
160
180
200
all
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
FF130 FF165 FF165 FF215 FF215 FF265 FF300 FF300 FF350 FF400 FF500 FF500 FF600 FF600 FF600
A 160 A 200 A 200 A 250 A 250 A 300 A 350 A 350 A 400 A 450 A 550 A 550 A 660 A 660 A 660
45.90 52.10 62.50 77.40 96.10 125.– 162.– 256.– 311.– 402.– 483.– 703.– 1000.– –
–
2) 6)
IM V1
without
protective
cover 2)
G
–
all
all
45.90 52.10 62.50 77.40 96.10 125.–
162.– 255.– 309.– 404.– 492.– 706.– 1010.– 1430.– 1010.–
IM V1
with
protective
cover
G
H00
all
all
91.50 106.– 117.– 155.80 174.50 262.–
299.– 437.– 584.– 768.– 947.– 1250.– 1740.– 2160.– 1740.–
IM V3 5)
H
–
all
all
45.90 52.10 62.50 77.40 96.10 125.–
162.– 256.– 311.– 402.– 483.– 703.– 1000.– –
IM B35
all, except ), *
2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp
acc. to DIN EN 50347
acc. to DIN 42948
F
P01
all
all
62.50 69.90 79.90 96.10 126.– 158.–
228.– 346.– 455.– 672.– 915.– 1190.– 1570.– 1570.– 1570.–
2) 4) 5)
J
3)
With special flange
of next larger size
IM B5
–
–
–
–
–
–
–
–
–
–
–
FF265 FF265 FF300 –
A 300 A 300 A 350 –
O. R. O. R. O. R. –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2) 6)
IM V1
without
protective
cover 2)
G
P01
all
all
–
–
–
O. R.
O. R.
O. R.
–
–
–
–
–
–
–
–
–
IM V1
with
protective
cover
G
P01+
H00
all
all
–
–
–
O. R.
O. R.
O. R.
–
–
–
–
–
–
–
–
–
IM V3 5)
H
P01
all
all
–
–
–
O. R.
O. R.
O. R.
–
–
–
–
–
–
–
–
–
IM B35
J
P01
all, except ), *
–
2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp
–
–
O. R.
O. R.
O. R.
–
–
–
–
–
–
–
–
–
2) 4) 5)
3)
For legends and footnotes, see Page 2/54.
2/52
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
Types of
construction
On
request
Type
of
construction
code
14th
position
of
the
Article
No.
For
types
of construction
with
order
code(s)
Article
No.
with
additional
identification
code
if required
-Z
Types of construction
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
version
Motor type – Frame size
71
80
90
100
112
Motor
type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version
type
1LE1. . . - . . . . . - . ■ . . (-Z)
With special flange acc. to DIN EN 50347
of next smaller size acc. to DIN 42948
132
160
180
200
225
250
280
315
S/M
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
2
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
Frame size
71
80
90
100
112
132
160
180
200
225
250
280
315
S/M
–
–
–
–
–
–
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
FF165 FF165 FF215 FF265 FF265 FF300 FF350 FF400 FF400 FF500 FF500 FF500
A 200 A 200 A 250 A 300 A 300 A 350 A 400 A 450 A 450 A 550 A 550 A 550
O. R. O. R. O. R. O. R. –
–
–
–
–
–
–
–
F
P02
all
all
–
–
–
IM V1
without
protective
cover 2)
G
P02
all
all
–
–
–
O. R. O. R. O. R.
O. R. –
–
–
–
–
–
–
–
IM V1
with
protective
cover
G
P02+
H00
all
all
–
–
–
O. R. O. R. O. R.
O. R. –
–
–
–
–
–
–
–
H
P02
all
all
–
–
–
O. R. O. R. O. R.
O. R. –
–
–
–
–
–
–
–
–
–
–
O. R. O. R. O. R.
O. R. –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
FT130 FT130 FT165 FT215 –
C 160 C 160 C 200 C 250 –
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
IM B5
2) 6)
2) 4) 5)
IM V3 5)
all, except ), *
2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp
With standard flange acc. to DIN EN 50347
acc. to DIN 42948
IM B14
K
–
all
all
IM B35
J
P02
3)
2) 7)
L
–
all
all
–
–
–
77.40 96.10 125.–
162.– –
–
–
–
–
–
–
–
IM V18
without
protective
cover 2)
M
–
all
all
–
–
–
77.40 96.10 125.–
162.– –
–
–
–
–
–
–
–
IM V18
with
protective
cover
M
H00
all
all
–
–
–
155.80 174.50 262.–
299.– –
–
–
–
–
–
–
–
N
–
all, except ), *
–
2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp
–
–
96.10 126.– 158.–
228.– –
–
–
–
–
–
–
–
IM V19
2)
2) 4) 5)
IM B34
3)
For legends and footnotes, see Page 2/54.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/53
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
Types of
construction
Type
of
construction
code
14th
position
of
the
Article
No.
2
For
types
of construction
with
order
code(s)
Article
No.
with
additional
identification
code
if required
-Z
10
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
version
Motor type – Frame size
71
80
90
100
112
Motor
type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version
type
1LE1. . . - . . . . . - . ■ . . (-Z)
With special flange acc. to DIN EN 50347
of next larger size
acc. to DIN 42948
132
160
180
200
On
request
20
225
250
280
315
S/M
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
Frame size
71
80
90
100
–
–
–
–
–
–
112
132
160
180
200
225
250
280
315
S/M
FT165 FT165 FT215 –
C 200 C 200 C 250 –
122.80 141.50 181.70 –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
–
–
–
–
–
–
K
P01
all
all
–
–
–
L
P01
all
all
–
–
–
122.80 141.50 181.70 –
–
–
–
–
–
–
–
–
IM V18
without
protective
cover 2)
M
P01
all
all
–
–
–
122.80 141.50 181.70 –
–
–
–
–
–
–
–
–
IM V18
with
protective
cover
M
P01+
H00
all
all
–
–
–
201.20 219.90 318.70 –
–
–
–
–
–
–
–
–
N
P01
all, except ), *
–
2-, 4-, 6-pole
≤ 200 hp and +, ,
8-pole ≤ 200 hp
–
–
141.50 171.40 214.70 –
–
–
–
–
–
–
–
–
IM B14
2) 7)
IM V19
2)
2) 4) 5)
IM B34
3)
Standard version
–
Not possible
O. R. Possible on request

1)
The types of construction IM B6/7/8, IM V6 and IM V5 with/without protective cover are also possible as long as no stamping of these types of
construction on the rating plate is required. As standard the type of construction IM B3 is then stamped on the rating plate. With type of construction IM V5 with protective cover, the protective cover has to be additionally
ordered with order code H00. The protective cover is not stamped on the
rating plate.
5)
The "Second shaft extension" option (order code L05) is not possible.
6)
2)
The types of construction IM V3 and IM V1 with/without protective cover
are also possible as long as no stamping of these types of construction on
the rating plate is required. As standard the type of construction IM B5 is
then stamped on the rating plate. With type of construction IM V1 with
protective cover, the protective cover has to be additionally ordered with
order code H00. The protective cover is not stamped on the rating plate.
The type of construction is stamped on the rating plate. If mounted in a
different position, the position must be specified to ensure that the condensation drainage holes are positioned correctly.
7)
3)
For North America export version Eagle Line 1LE1521/1LE1621 NEMA
Energy Efficient, types of construction with feet are not possible for 2-pole,
4-pole and 6-pole motors ≤ 200 hp in accordance with NEMA MG1 Table
12-11.
The types of construction IM V19 and IM V18 with/without protective cover
are also possible as long as no stamping of these types of construction on
the rating plate is required. As standard the type of construction IM B14 is
then stamped on the rating plate. With type of construction IM V18 with
protective cover, the protective cover has to be additionally ordered with
order code H00. The protective cover is not stamped on the rating plate.
4)
In combination with an encoder it is not necessary to order the protective
cover (order code H00), as this is delivered as a protection for the encoder
as standard. In this case the protective cover is standard version (without
additional charge).
2/54
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Types of construction – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
■ Selection and ordering data
Types of
construction
Type
of construction
code
12th
position
of the
Article
No.
1L . . . . . - . . . . ■
1PP . . . . - . . . . ■
Without flange
IM B3 1)
0
Additional
identification
code
with
order
code
and
plain
text
if required
Motor category
Motor
version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
63
71
80
90
1LA9
1LA9 $
100
112
132
160
180
200
225
–
1LA7/1LA5
1LA9
1PP7/1PP5
1LP7/1LP5
NEMA Energy 1LA9
Efficient
NEMA
–
Premium
Efficient
Pole1LA7/1LA5
changing
For converter- 1LA7/1LA5
fed operation
only
Motor
Motor
version
type
1LA7 %
1LA9 with increased output (
1PP7 )
1LP7 +
1LA9 -
1LA5 &
1LA7 .
1LA5 /
Frame size
63
71
80
90
100
112
132
160
180
200
225
–
all except -











2
1PP5 *
1LP5 ,
1LA7 0
1LA5 1
IM B6, IM B7,
IM B8 1)
0
–
all except -











IM V6 1)
0
–
all except -











IM V5
without
protective
cover 1)
0
–
all except -











IM V5
with
protective
cover
9
M1F
all except ), *, +, ,
and -
42.60 47.50 56.80 56.80 81.50 81.50 142.– 142.– 190.– 286.– 379.–
1) 2)
With flange
IM B5
acc. to DIN EN 50347
acc. to DIN 42948
1
–
all
all
FF115 FF130 FF165 FF165 FF215 FF215 FF265 FF300 FF300 FF350 FF400
A 140 A 160 A 200 A 200 A 250 A 250 A 300 A 350 A 350 A 400 A 450
41.40 45.90 52.10 62.50 77.40 96.10 125.– 162.– 256.– 311.– 402.–
all
41.40 45.90 52.10 62.50 77.40 96.10 125.– 162.– 256.– 311.– 402.–
IM V1
without
protective
cover 3)
1
–
all
IM V1
with
protective
cover 2) 3)
4
–
all except ), *, + and , 82.40 91.50 106.– 117.– 156.– 175.– 262.– 303.– 437.– 584.– 768.–
IM V3 3)
1
9
–
M1G
all
all
IM B35 1)
6
–
all except -
all
all
41.40 45.90 52.10 62.50 77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
–
–
–
266.– 323.– 418.–
58.60 62.50 69.90 79.90 96.10 126.– 158.– 228.– 346.– 455.– 672.–
For legends and footnotes, see Page 2/57.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/55
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
Types of
construction
Type
of construction
code
12th
position
of the
Article
No.
Additional
identification
code
with
order
code
and
plain
text
if required
2
10
Motor category
Motor
version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
63
71
80
90
1LA9
1LA9 $
100
112
132
160
180
200
225
–
1LA7/1LA5
1LA9
1PP7/1PP5
1LP7/1LP5
NEMA Energy 1LA9
Efficient
NEMA
–
Premium
Efficient
Pole1LA7/1LA5
changing
For converter- 1LA7/1LA5
fed operation
only
Motor
Motor
version
type
1L . . . . . - . . . . ■
1PP . . . . - . . . . ■
With standard flange
acc. to DIN EN 50347
acc. to DIN 42948
IM B14
2
–
all
On
request
20
1LA7 %
1LA9 with increased output (
1PP7 )
1LP7 +
1LA9 -
1LA5 &
1LA7 .
1LA5 /
1PP5 *
1LP5 ,
1LA7 0
all
Frame size
63
71
FT75 FT85
C 90 C 105
41.40 45.90
80
FT100
C 120
52.10
90
FT115
C 140
62.50
100
FT130
C 160
77.40
112
FT130
C 160
96.10
1LA5 1
132
FT165
C 200
125.–
160
180
FT215
C 250
162.– –
200
225
–
–
IM V19
2
–
all
all
41.40 45.90 52.10 62.50 77.40 96.10 125.– 162.– –
–
–
IM V18
without
protective
cover
2
–
all
all
41.40 45.90 52.10 62.50 77.40 96.10 125.– 162.– –
–
–
IM V18
with
protective
cover 2)
9
M2A
all except ), *, + and , 85.70 95.20 110.– 122.– 162.– 182.– 272.– 315.– –
–
–
IM B34 1)
7
–
all except -
–
–
58.60 62.50 69.90 79.90 96.10 126.– 158.– 228.– –
For legends and footnotes, see Page 2/57.
2/56
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Types of
construction
Type
of construction
code
12th
position
of the
Article
No.
Types of construction – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
Additional
identification
code
with
order
code
and
plain
text
if required
Motor category
Motor
version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
63
71
80
90
1LA9
1LA9 $
112
132
160
180
200
225
–
1LA7/1LA5
1LA9
1PP7/1PP5
1LP7/1LP5
NEMA Energy 1LA9
Efficient
NEMA
–
Premium
Efficient
Pole1LA7/1LA5
changing
For converter- 1LA7/1LA5
fed operation
only
Motor
Motor
version
type
1L . . . . . - . . . . ■
1PP . . . . - . . . . ■
With special flange
acc. to DIN EN 50347
acc. to DIN 42948
IM B14
3
–
all
100
1LA7 %
1LA9 with increased output (
1PP7 )
1LP7 +
1LA9 -
1LA5 &
1LA7 .
1LA5 /
1PP5 *
1LP5 ,
1LA7 0
all
Frame size
63
71
FT100 FT115
C 120 C 140
41.40 45.90
80
FT130
C 160
52.10
90
FT130
C 160
62.50
100
FT165
C 200
77.40
112
FT165
C 200
96.10
2
1LA5 1
132
FT215
C 250
125.–
160
180
FT265
C 300
162.– –
200
225
–
–
IM V19
3
–
all
all
41.40 45.90 52.10 62.50 77.40 96.10 125.– 162.– –
–
–
IM V18
without
protective
cover
3
–
all
all
41.40 45.90 52.10 62.50 77.40 96.10 125.– 162.– –
–
–
IM V18
with
protective
cover 2)
9
M2B
all except ), *, + and , 85.70 95.20 110.– 122.– 162.– 182.– 272.– 315.– –
–
–
IM B34 1)
9
M2C
all except -
–
–

–
1)
60.90 65.–
72.20 83.10 99.90 131.– 164.– 237.– –
Standard version
Not possible
For the North America export version of 1LA9 with order code D42
NEMA Energy Efficient, types of construction with feet are not possible for
2-pole, 4-pole and 6-pole motors ≤ 200 hp in accordance with NEMA MG1
Table 12-11.
Recommended retail prices plus metal surcharges (MS)
2)
The "Second shaft extension" option, order code K16 is not possible.
3)
For frame sizes 180 M to 225 M, the 1LA5 motors can be supplied with two
additional eyebolts; state identification code "-Z" and order code K32 .
Siemens D 81.1 P · 03/2015
2/57
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
10
20
On
request
■ Selection and ordering data
Types of
construction
Type
of construction
code
12th
position
of the
Article
No.
2
Additional
identification
code
with
order
code
and
plain
text
order
if required
Motor category
Motor
version
Motor Motor type – Frame size
type 100 112 132 160 180
(castiron)
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
1LG6
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converter-fed
operation
only
Motor
version
1L . . . . . - . . . . ■
1PP4 . . . - . . . . ■
Without flange
IM B3 1)
0
IM B6, IM B7,
IM B8
Additional charges plus MS EUR, standard delivery time (colored area)
200
225
250
280
315
S/M
315 L 315 L 315 L
24- … 8- 1LG6
pole pole318-.M,
chang- 1LG6
ing
312-.M
1LG6 $
1LG6 %
1LG6
1LA6/ 1LA6 &
1LG4
1PP4
1LP4
1LG6
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6
1LG6
,
1LG4
1LG4 -
1LG6
1LG6 .
Motor Frame size
type
100 112
132
160
180
200
225
250
280
315
S/M
315 L
2pole
315 L
4- … 8polechanging
315 L
1LG6
318-.M,
1LG6
312-.M
–
all except +













0
–
all except +













0
9
–
M1E
all except +
all except +










–
–
–
–
–
–
–
–
–
–
438.–
–
–
–
O. R.
0
9
–
M1D
all except +
all except +










–
–
–
–
–
–
–
–
–
–
456.–
–
–
9
M1F
all except ), *
and + ≤ 200 hp
758.–
1220.– 758.–
1) 2)
IM V6 1) 2) 4)
IM V5
without
protective
cover


–
O. R.
1) 2) 4)
IM V5
with
protective
cover
81.50 81.50 142.– 142.– 190.– 286.– 379.– 473.– 568.–
O. R.
1) 2) 3) 4)
For legends and footnotes, see Page 2/61.
2/58
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
Types of
construction
On
request
Type
of construction
code
12th
position
of the
Article
No.
Types of construction
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Additional
identification
code
with
order
code
and
plain
text
order
if required
Motor category
Motor
version
Motor Motor type – Frame size
type 100 112 132 160 180
(castiron)
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
1LG6
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converter-fed
operation
only
Motor
version
1L . . . . . - . . . . ■
1PP4 . . . - . . . . ■
With flange
acc. to DIN EN 50347
acc. to DIN 42948
IM B5
1
–
all
IM V1
without
protective
cover
250
280
315
S/M
315 L 315 L 315 L
24- … 8- 1LG6
pole pole318-.M,
chang- 1LG6
ing
312-.M
1LG6 %
2
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6
1LG6
,
1LG4
1LG4 -
1LG6
1LG6 .
Motor Frame size
type
100 112
132
160
180
200
225
250
280
315
S/M
315 L
2pole
315 L
4- … 8polechanging
all
FF215 FF215 FF265 FF300 FF300 FF350 FF400 FF500 FF500 FF600 FF600 FF600
A 250 A 250 A 300 A 350 A 350 A 400 A 450 A 550 A 550 A 660 A 660 A 660
77.40 96.10 125.– 162.– 256.– 311.– 402.– 483.– 703.– 1000.– –
–
all
all
all
all
77.40 96.10 125.– 162.– 256.– 311.– 402.– 483.– 703.–
–
–
–
–
–
–
–
–
–
all
all
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
–
266.– 323.– 418.– 502.– 731.–
315 L
1LG6
318-.M,
1LG6
312-.M
FF740
A 800
–
1000.– –
–
–
–
1440.– 1000.– 1440.–
(2-pole)
1830.–
(4 …8pole)
all except ) and 156.– 175.– 262.– 303.– 437.– 584.– 768.– 947.– 1250.– 1740.– 2160.– 1740.– 2160.–
*
(2-pole)
2890.–
(4 …8pole)
4
–
IM V3 5)
1
9
–
M1G
all
all
IM B35 1)
6
–
all except +
≤ 200 hp
3) 4) 5)
225
1LG6 $
1LA6/ 1LA6 &
1LG4
1PP4
1LP4
1LG6
–
–
IM V1 with
protective
cover
200
1LG6
1
8
4) 5)
Additional charges plus MS EUR, standard delivery time (colored area)
–
–
1040.– –
–
–
–
–
96.10 126.– 158.– 228.– 346.– 455.– 672.– 915.– 1190.– 1570.– 1570.– 1570.– 1570.–
(2-pole)
2290.–
(4 …8pole)
For legends and footnotes, see Page 2/61.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/59
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Types of
construction
Type
of construction
code
12th
position
of the
Article
No.
2
Additional
identification
code
with
order
code
and
plain
text
order
if required
Motor category
10
Motor Motor type – Frame size
type 100 112 132 160 180
(castiron)
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
1LG6
1L . . . . . - . . . . ■
1PP4 . . . - . . . . ■
With standard flange
acc. to DIN EN 50347
acc. to DIN 42948
IM B14
2
–
all
On
request
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
version
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converter-fed
operation
only
Motor
version
20
200
225
250
280
315
S/M
315 L 315 L 315 L
24- … 8- 1LG6
pole pole318-.M,
chang- 1LG6
ing
312-.M
1LG6 $
1LG6 %
1LG6
1LA6/ 1LA6 &
1LG4
1PP4
1LP4
1LG6
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6
1LG6
,
1LG4
1LG4 -
1LG6
1LG6 .
Motor Frame size
type
100 112
132
160
180
200
225
250
280
315
S/M
315 L
2pole
315 L
4- … 8polechanging
315 L
1LG6
318-.M,
1LG6
312-.M
all
FT130 FT130 FT165 FT215
C 160 C 160 C 200 C 250
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
–
IM V19
2
–
all
all
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
–
IM V18
without
protective
cover
2
–
all
all
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
–
IM V18
with
protective
cover
9
M2A
all except ) and 162.– 182.– 272.– 315.– –
* ≤ 200 hp
–
–
–
–
–
–
–
–
7
–
all except +
≤ 200 hp
–
–
–
–
–
–
–
–
3)
IM B34 1)
96.10 126.– 158.– 228.– –
For legends and footnotes, see Page 2/61.
2/60
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
Types of
construction
On
request
Type
of construction
code
12th
position
of the
Article
No.
Types of construction
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Additional
identification
code
with
order
code
and
plain
text
order
if required
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
version
Motor Motor type – Frame size
type 100 112 132 160 180
(castiron)
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
1LG6
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converter-fed
operation
only
Motor
version
1L . . . . . - . . . . ■
1PP4 . . . - . . . . ■
With special flange
acc. to DIN EN 50347
acc. to DIN 42948
IM B14
3
–
all
200
225
250
280
315
S/M
315 L 315 L 315 L
24- … 8- 1LG6
pole pole318-.M,
chang- 1LG6
ing
312-.M
1LG6 $
1LG6 %
1LG6
1LA6/ 1LA6 &
1LG4
1PP4
1LP4
1LG6
2
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6
1LG6
,
1LG4
1LG4 -
1LG6
1LG6 .
Motor Frame size
type
100 112
132
160
180
200
225
250
280
315
S/M
315 L
2pole
315 L
4- … 8polechanging
315 L
1LG6
318-.M,
1LG6
312-.M
all
FT165 FT165 FT215 FT265
C 200 C 200 C 250 C 300
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
–
IM V19
3
–
all
all
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
–
IM V18
without
protective
cover
3
–
all
all
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
–
IM V18
with
protective
cover
9
M2B
all except ) and 168.– 189.– 283.– 328.– –
* ≤ 200 hp
–
–
–
–
–
–
–
–
9
M2C
all except +
≤ 200 hp
–
–
–
–
–
–
–
–
3)
IM B34 1)
99.90 131.– 164.– 237.– –
Standard version
Without additional charge
O. R. Possible on request
–
Not possible


1)
For the North America export version of 1LG6 with order code D42
NEMA Energy Efficient, types of construction with feet are not possible for
2-pole, 4-pole and 6-pole motors ≤ 200 hp in accordance with NEMA MG1
Table 12-11.
2)
If motors of frame sizes 180 M to 315 L are fixed to the wall, it is
recommended that the motor feet are supported.
3)
The "Second shaft extension" option, order code K16 is not possible.
Recommended retail prices plus metal surcharges (MS)
4)
60 Hz version is available on request for 2-pole 1LG4/1LG6 motors of
frame size 315 L.
5)
1LG4/1LG6 motors of frame sizes 225 S to 315 M are supplied with two
screw-in eyebolts conforming to IM B5, whereby one can be repositioned
to conform to IM V1 or IM V3. It is important to note that stress must not be
applied perpendicular to the ring plane.
Siemens D 81.1 P · 03/2015
2/61
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Motor protection
Aluminum series 1LE10, 1PC10
10
20
On
request
■ Selection and ordering data
Motor protection
Motor
protection
code
15th
position
of the
Article
No.
Additional Motor category
identification code Motor version
with order
code and
plain text IE2 High Efficiency
if required
2
IE3 Premium Efficiency
IE1 Standard Efficiency
NEMA Energy Efficient
NEMA Premium Efficient
Pole-changing
1LE1. . . - . . . . . - . . ■ .
1PC1. . . - . . . . . - . . ■ .
Motor protection (winding protection)
Without motor protection 1) A
–
Motor protection with PTC
B
–
thermistors with 1 or 3
embedded temperature
sensors for tripping 2)
C
–
Motor protection with PTC
thermistors with 6 embedded temperature sensors for
alarm and tripping 2)
–
Motor temperature detection F
with embedded temperature
sensor KTY 84-130 2)
Motor temperature detection G
–
with embedded temperature
sensors 2 × KTY 84-130 2)
Installation of 3 Pt100
H
–
resistance thermometers
Pt100 2)
Q2A
NTC thermistors for tripping Z
Temperature detectors for
Z
Q3A
2)
tripping

–
1)
Motor version
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
1LE1001
1LE1001
1PC1001
1PC1001
1LE1003
1LE1003
1LE1002
1LE1002
1PC1002
1PC1002
1LE1021
1LE1021 Eagle Line
1LE1023
1LE1023 Eagle Line
1LE1011
1LE1011
1LE1012
1LE1012
Motor type Frame size
80
90
100
112
132
160
all
all
all
all






35.30
41.40
114.–
114.–
171.–
171.–
all
all
168.–
168.–
195.–
195.–
261.–
261.–
all
all
100.–
100.–
114.–
114.–
171.–
171.–
all
all
201.–
201.–
229.–
229.–
342.–
342.–
all
all
–
–
1440.–
1440.–
1440.–
1440.–
all
all
all
all
–
112.–
–
112.–
229.–
127.–
229.–
127.–
340.–
186.–
340.–
186.–
Standard version
Not possible
Frame sizes 80 and 90 with voltage code 02 are only available without
motor protection (motor protection code A).
2/62
Siemens D 81.1 P · 03/2015
2)
Evaluation with appropriate tripping unit (see Catalog IC 10) is recommended. For pole-changing motors with separate windings, double the
number of temperature sensors or temperature detectors is required and
will be installed at the factory. This also results in a double additional
charge.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Motor protection
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
■ Selection and ordering data
Motor protection
Motor
protection
code
15th
position
of the
Article
No.
Additional
identification
order
with
order
code
and
plain
text
order
if required
1LE1. . . - . . . . . - . . .
■.
Motor protection (winding protection)
Without motor protection 1) A
–
Motor protection with
PTC thermistors with
3 embedded temperature
sensors for tripping 1) 2)
Motor protection with
PTC thermistors with
6 embedded temperature
sensors for alarm and
tripping 2)
Motor temperature
detection with embedded
temperature sensor
KTY 84-130 2)
Motor temperature
detection with embedded
temperature sensor
2 × KTY 84-130 2)
Installation of 3 Pt100
resistance thermometers
Installation of 6 Pt100
resistance thermometers
NTC thermistors for
tripping
Temperature detectors
for tripping 2)

–
Motor category
Motor
Motor
version
type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version
type
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
71
80
90
100
112
132
160
180
200
225
250
280
315
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
2
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
Frame size
71
80
90
100
112
132
160
180
200
225
250
280
315
B
–
all except %, (, * 












and ,
Standard version for 37.30 38.50 41.40 114.– 114.– 171.– 171.– 227.– 227.– 310.– 310.– 386.– 386.–
Performance Line
%, (, * and ,
C
–
all
all
168.– 168.– 168.– 195.– 195.– 261.– 261.– 401.– 401.– 521.– 521.– 647.– 647.–
F
–
all
all
100.– 100.– 100.– 114.– 114.– 171.– 171.– 322.– 322.– 441.– 572.– 572.– 843.–
G
–
all
all
200.– 200.– 200.– 230.– 230.– 340.– 340.– 523.– 523.– 719.– 974.– 974.– 1430.–
H
–
all
all
995.– 995.– 995.– 1180.– 1180.– 1180.– 1180.– 1440.– 1440.– 1440.– 1590.– 1590.– 1590.–
J
–
all
all
–
Z
Q2A
all
all
200.– 200.– 200.– 230.– 230.– 340.– 340.– –
Z
Q3A
all
all
112.– 112.– 112.– 127.– 127.– 186.– 186.– 257.– 257.– 348.– 348.– 431.– 431.–
–
–
–
–
–
–
2350.– 2350.– 2350.– 2350.– 2350.– 2350.–
–
–
–
–
–
Standard version
Not possible
Note:
Options are available specifically for bearing protection –
For order codes and descriptions, see from Page 2/71.
1)
For the Performance Line, motor protection by means of PTC thermistors
with 3 embedded temperature sensors for tripping (motor protection code
B) is already included in the base price. For the Performance Line, the
option "without motor protection" (motor protection code A) is not possible.
Recommended retail prices plus metal surcharges (MS)
2)
Evaluation with appropriate tripping unit (see Catalog IC 10) is recommended.
Siemens D 81.1 P · 03/2015
2/63
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Connection box position
Aluminum series 1LE10, 1PC10
10
20
On
request
■ Selection and ordering data
Connection box position
4
6
7
Connection
box
position
5 code
16th
position
of the
Article
No.
Additional Motor category
identification code Motor version
with order
code and
plain text IE2 High Efficiency
if required
IE3 Premium Efficiency
IE1 Standard Efficiency
2
NEMA Energy Efficient
NEMA Premium Efficient
Pole-changing
1LE1. . . - . . . . . - . . .
1PC1. . . - . . . . . - . . .
Connection box position
Connection box top 1)
Connection box
on RHS 2)
Connection box
on LHS 2)
Connection box bottom 2) 3)

–
1)
■
■
Motor version
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
1LE1001
1LE1001
1PC1001
1PC1001
1LE1003
1LE1003
1LE1002
1LE1002
1PC1002
1PC1002
1LE1021
1LE1021 Eagle Line
1LE1023
1LE1023 Eagle Line
1LE1011
1LE1011
1LE1012
1LE1012
Motor type Frame size
80
90
100
112
132
160
4
5
–
–
all
all
all
all






34.20
38.60
99.50
108.–
117.–
125.–
6
–
all
all
34.20
38.60
99.50
108.–
117.–
125.–
7
–
all
all
–
–
99.50
108.–
117.–
125.–
Standard version
Not possible
For types of construction with feet, cast feet are standard. Screwed-on feet
are available with order code H01.
2/64
Siemens D 81.1 P · 03/2015
2)
For types of construction with feet, screwed-on feet are standard.
3)
Not generally possible for motors with feet.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Connection box position
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
■ Selection and ordering data
Connection box position
4
6
7
Connection
box
5 position
code
16th
position
of the
Article
No.
1LE1. . . - . . . . . - . . .
Connection box position
Connection box top 1)
Connection box
on RHS 2)
Connection box
on LHS 2)
Connection box bottom 3)

–
1)
Additional
identification
code
with
order
code
and
plain
text if
required
■
Motor category
Motor
Motor
version
type
(castiron)
IE2 High
1LE1501
Efficiency
1LE1601
IE3 Premium 1LE1503
Efficiency
1LE1603
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium
1LE1623
Efficient
Motor version Motor
type
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
71 80 90 100
112
132
160 180 200 225 250 280
Frame size
71 80 90
100
112
132
160
180
200
225
250
280
315










315
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
2
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
4
5
–
–
all
all
all
all


–
50.– 70.– 99.50 108.– 117.– 125.– 353.– 416.– 492.– 731.– 821.– 946.–

6
–
all
all
–
50.– 70.– 99.50 108.– 117.– 125.– 353.– 416.– 492.– 731.– 821.– 946.–
7
–
all
all
–
–
–
99.50 108.– 117.– 125.– –
–
–
–
–
–
Standard version
Not possible
For types of construction with feet, cast feet are standard. Screwed-on feet
are available with order code H01.
Recommended retail prices plus metal surcharges (MS)
2)
For types of construction with feet, screwed-on feet are standard.
3)
Not generally possible for motors with feet.
Siemens D 81.1 P · 03/2015
2/65
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Aluminum series 1LE10, 1PC10
10
20
On
request
■ Selection and ordering data
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
Motor category
Motor
version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
2
1LE1. . . - . . . . . - . . . . -Z
1PC1. . . - . . . . . - . . . . -Z
Motor connection and connection box
External grounding
Connection box on NDE 3)
Rotation of the connection box through
90°, entry from DE 1)
Rotation of the connection box through
90°, entry from NDE
Rotation of the connection box through
180°
One metal cable gland
3 cables protruding,
0.5 m long 4)5)
3 cables protruding,
1.5 m long 4)5)
6 cables protruding,
0.5 m long 4)
6 cables protruding,
1.5 m long 4)
6 cables protruding,
3 m long 4)
Reduction piece for M cable gland in
accordance with British Standard,
both cable entries mounted 2)
Larger connection box
Motor connector Han-Drive 10e for
230 VΔ/400 VY 30)
Motor connector Han-Drive 10e EMC-safe
for 230 VΔ/400 VY 30)
Smaller motor connector CQ12 EMC-safe
Smaller motor connector CQ12 without EMC
Windings and insulation
Temperature class 155 (F), used acc. to
155 (F), with service factor (SF)
Temperature class 155 (F), used acc. to
155 (F), with increased output
Temperature class 155 (F), used acc. to
acc. to 155 (F), with increased coolant
temperature
Temperature class 155 (F), used acc. to
130 (B), coolant temperature 45 °C,
derating approx. 4 %
Temperature class 155 (F), used acc. to
130 (B), coolant temperature 50 °C,
derating approx. 8 %
Temperature class 155 (F), used acc. to
130 (B), coolant temperature 55 °C,
derating approx. 13 %
Temperature class 155 (F), used acc. to
130 (B), coolant temperature 60 °C,
derating approx. 18 %
Temperature class H
Temperature class 180 (H) at rated output
and max. CT 60 °C 6)
Increased air humidity/temperature with
30 to 60 g water per m³ of air
Increased air humidity/temperature with
60 to 100 g water per m³ of air
Motor version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
1LE1001
1LE1001 $
1PC1001
1PC1001 %
1LE1003
1LE1003 &
1LE1002
1PC1002
1LE1021
1LE1002 (
1PC1002 )
1LE1021 Eagle Line *
1LE1023
1LE1023 Eagle Line +
1LE1011
1LE1012
Motor type Frame size
80
90
1LE1011 ,
1LE1012 100
112
132
160
H04
H08
R10
all
all
all
all
all
all
22.80
80.–
22.80
92.–
27.50
114.–
27.50
140.–
27.50
181.–
27.50
246.–






R11
all
all






R12
all
all






R15
R20
all
all
all, except , and -
56.90
54.60
56.90
54.60
107.–
65.40
107.–
78.40
107.–
95.80
136.–
113.–
R21
all, except , and -
66.–
66.–
78.90
94.90
116.–
137.–
R22
all
all
84.60
84.60
101.–
121.–
150.–
177.–
R23
all
all
108.–
108.–
129.–
156.–
189.–
225.–
R24
all
all
172.–
172.–
208.–
245.–
307.–
367.–
R30
all
all
–
–
184.–
208.–
208.–
232.–
R50
47.10
274.–
274.–
319.–
355.–
R70
all, standard version for Eagle
47.10
Line * and + < Frame size 100
all
all
138.70
138.70
369.–
369.–
422.–
–
R71
all
all
257.10
257.10
502.–
502.–
576.–
–
R72
R73
all
all
all
all
210.–
91.60
210.–
91.60
–
–
–
–
–
–
–
–
N01
all
all
–
–
46.–
46.–
61.20
61.20
N02
all
all
–
–
46.–
46.–
61.20
61.20
N03
all
all
40.–
40.–
46.–
46.–
61.20
61.20
N05
all
all
40.–
40.–
46.–
46.–
61.20
61.20
N06
all
all
40.–
40.–
46.–
46.–
61.20
61.20
N07
all
all
70.80
83.30
103.–
125.–
159.–
198.–
N08
all
all
70.80
83.30
103.–
125.–
159.–
198.–
all
all
all
all
150.–
210.–
150.–
210.–
–
201.–
–
257.–
–
325.–
–
404.–
N20
all
all
141.–
141.–
141.–
141.–
141.–
214.–
N21
all
all
275.–
275.–
275.–
309.–
334.–
444.–
N10
N11
New!
For legends and footnotes, see Page 2/70.
2/66
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Special versions
Options
Aluminum series 1LE10, 1PC10
Additional
identification
code -Z
with order
code and
plain text
if required
Motor category
Motor
version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
1LE1. . . - . . . . . - . . . . -Z
1PC1. . . - . . . . . - . . . . -Z
Windings and insulation (continued)
Temperature class 155 (F), used acc. to
130 (B), with higher coolant temperature
and/or site altitude
Temperature class 155 (F), used acc. to
155 (F), other requirements
Colors and paint finish
Special finish in RAL 7030 stone gray
Unpainted (only cast-iron parts primed)
Unpainted, only primed
Special finish sea air resistant
Special finish in special RAL colors: For
RAL colors, see "Special finish in special
RAL colors" (see Catalog D 81.1 Part 1)
Special finish in other standard RAL
colors: RAL 1002, 1013, 1015, 1019,
2003, 2004, 3000, 3007, 5007, 5009,
5010, 5012, 5015, 5017, 5018, 5019,
6011, 6019, 6021, 7000, 7001, 7004,
7011, 7016, 7022, 7031, 7032, 7033,
7035, 9001, 9002, 9005
(see Catalog D 81.1 Part 1)
Modular technology – Basic versions 7)
Mounting of holding brake
(standard assignment) 8) 28)
Mounting of brake for increased
frequency of operation (operation brake)
Mounting of separately driven fan 29)
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
1LE1001
1LE1001 $
1PC1001
1PC1001 %
1LE1003
1LE1003 &
1LE1002
1PC1002
1LE1021
1LE1002 (
1PC1002 )
1LE1021 Eagle Line *
1LE1023
1LE1023 Eagle Line +
2
1LE1011
1LE1012
Motor type Frame size
80
90
1LE1011 ,
1LE1012 100
112
132
160
Y50 • and
all
specified
output,
CT .. °C or
SA …. m
above
sea level
Y52 • and
all
identification
code
all
106.–
125.–
154.–
186.–
240.–
295.–
all
39.50
39.50
46.–
46.–
61.20
61.20
all
all
all
all
all
all
all
all
all
all












19.90
–
659.–
26.50
–
659.–
26.50
658.–
745.–
26.50
658.–
745.–
42.20
703.–
745.–
42.20
703.–
787.–
all
all
58.30
58.30
98.30
98.30
129.–
129.–
all, except %, ) and in combi- 446.–
nation with order code F90
all
all
O. R.
535.–
625.–
760.–
980.–
1940.–
O. R.
O. R.
O. R.
O. R.
O. R.
all, except %, ) and in combi- 685.–
nation with order code F90
all, except %, ) and in combi- 688.–
nation with order code F90
all, except %, ) and in combi- 980.–
nation with order code F90
685.–
685.–
815.–
940.–
1090.–
688.–
703.–
703.–
760.–
760.–
980.–
974.–
974.–
1030.–
1030.–
all, except %, ) and in combination with order code F90
all, except %, ) and in combination with order code F90
all, except %, ) and in combination with order code F90
all, except %, ) and in combination with order code F90
33.50
33.50
50.40
50.40
50.40
50.40
33.50
33.50




33.50
33.50
50.40
50.40
50.40
50.40
238.–
238.–
251.–
251.–
280.–
406.–
all, except %, ) and in combi- –
nation with order code F90
all, except %, ) and in combi- –
nation with order code F90
all, except %, ) and in combi- –
nation with order code F90
–
2910.–
2910.–
2970.–
2970.–
–
3370.–
3370.–
3420.–
3420.–
–
4350.–
4350.–
4440.–
4440.–
all, except %, ) and in combi- –
nation with order code F90
–
–
–
595.–
595.–
all, except %, ) and in combi- –
nation with order code F90
–
–
–
595.–
595.–
all, except %, ) and in combi- 66.70
nation with order code F90
66.70
66.70
66.70
88.50
102.–
Motor version
S00
S01
S03
Y51 • and
special finish
RAL….
Y54 • and
special finish
RAL….
F01
F02
F70
G01
Mounting of 1XP8012-10 (HTL) rotary
pulse encoder 9) 10)
G02
Mounting of 1XP8012-20 (TTL) rotary
pulse encoder 9) 10)
Modular technology – Additional versions
F10
Brake supply voltage 24 V DC
Brake supply voltage 230 V AC, 50/60 Hz F11
Brake supply voltage 400 V AC, 50/60 Hz F12
F50
Mechanical manual brake release with
lever (no locking)
Special technology 6)
Mounting of LL 861 900 220 rotary pulse G04
encoder 9)
Mounting of HOG 9 D 1024 I rotary pulse G05
encoder 9)
G06
Mounting of HOG 10 D 1024 I rotary
pulse encoder 9)
Mechanical design and degrees of protection
Low-noise version for
F77
2-pole motors with clockwise direction of
rotation
Low-noise version for
F78
2-pole motors with counter-clockwise
direction of rotation
Prepared for mountings, center hole only G40
10)
For legends and footnotes, see Page 2/70.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/67
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Aluminum series 1LE10, 1PC10
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
10
Motor category
Motor
version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
2
1LE1002
1PC1002
1LE1021
1LE1002 (
1PC1002 )
1LE1021 Eagle Line *
1LE1023
1LE1023 Eagle Line +
1LE1011
1LE1012
Motor type Frame size
80
90
1LE1011 ,
1LE1012 100
112
132
160
136.–
136.–
136.–
180.–
207.–
G42
all, except %, ) and in combi- 136.–
nation with order code F90
136.–
136.–
136.–
180.–
207.–
G43
all, except %, ) and in combi- 68.80
nation with order code F90
68.80
76.80
76.80
134.–
134.–
H00
all, except %, ) and in combination with order code F90
all
all
all
all
all
all
all
all
only possible for &, * and +
all
all
all
all
all
all
54.–
54.–
78.40
78.40
137.–
137.–
86.40
–
64.40
–
46.90
143.–
158.–
46.–
86.40
–
71.80
–
48.30
143.–
158.–
49.20
99.50
180.–
78.70
78.70
–
143.–
158.–
54.80
108.–
199.–
85.90
78.70
–
143.–
158.–
59.90
117.–
216.–
93.10
93.10
–
143.–
158.–
73.10
125.–
234.–
100.–
93.10
–
214.–
235.–
107.–
45.40
–
45.40
–
45.40
O. R.
56.70
O. R.
56.70
O. R.
–
O. R.
245.–
307.–
367.–
465.–
539.–
618.–
54.–
54.–
67.40
67.40
80.90
80.90
–
–
–
–
208.–
241.–
308.–
389.–




38.60
38.60
38.60
38.60
38.60
38.60
77.70
86.60
96.10
114.–
146.–
178.–
–
77.70
–
86.60




96.10
114.–
146.–
178.–
153.–
162.–
173.–
178.–
285.–
340.–
37.90
37.90
–
40.20
40.20
–
69.30
42.–
95.90
82.10
44.30
112.–
101.–
46.90
126.–
138.–
–
–
–
–
302.–
193.–
310.–
225.–
319.–
252.–
346.–
336.–
–
–
245.–
274.–
302.–
333.–






243.–
257.–
270.–
312.–
399.–
494.–






20.80
91.50
20.80
106.–
27.–
106.–
27.–
106.–
31.90
122.–
31.90
122.–
15)
Protective cover for encoder
(supplied loose – only for mountings
with order codes G40, G41 and G42)2)
Protective cover 9) 11)
On
request
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
1LE1001
1LE1001 $
1PC1001
1PC1001 %
1LE1003
1LE1003 &
1LE1. . . - . . . . . - . . . . -Z
Motor version
1PC1. . . - . . . . . - . . . . -Z
Mechanical design and degrees of protection (continued)
Prepared for mountings with shaft D12
G41
all, except %, ) and in combi- 136.–
15)
nation with order code F90
Prepared for mountings with shaft D16
20
H01
Screwed-on (instead of cast) feet
Vibration-proof version
H02
Condensation drainage holes 14)
H03
H07
Rust-resistant screws (externally)
Housing with screw down possibility
H10
IP65 degree of protection 13)
H20
H22
IP56 degree of protection 12)
Drive-end seal for flange-mounting
H23
11)
motors, oil-tight to 0.1 bar
P01
all
all
Next larger standard flange
Next smaller standard flange
P02
all
all
Coolant temperature and site altitude
Coolant temperature
D03
all
all
-40 to +40 °C 16) 28)
D04
all
all
Coolant temperature
-30 to +40 °C 16) 28)
Designs in accordance with standards and specifications
VIK version
C02
only possible for $ and &
only possible for ( and )
IE1 motor without CE marking for export D22
outside EEA (see EU Directive 640/200 9)
18)
Electrical according to NEMA MG1-12
D30
all, standard version for * and
+
D31
all, standard version for * and
Design according to UL with
+
"Recognition Mark" 19)
D34
only possible for $ and %
China Energy Efficiency Label
Canadian regulations (CSA) 17)
D40
all, standard version for * and
+
L82
all, except % and )
Train-compatible version
Bearings and lubrication
Located bearing DE
L20
all
all
Located bearing NDE
L21
all
all
Bearing design for increased cantilever L22
all
all
forces
20)
L23
all
all
Regreasing device
Special bearing for DE and NDE,
L25
all
all
bearing size 63
Q01
all
all
Measuring nipple for SPM shock pulse
measurement for bearing inspection 20)
Balance and vibration quantity
Vibration quantity level A
all
all
Vibration quantity level B
L00
all
all
Half-key balancing (standard)
all
all
Balancing without key
L01
all
all
L02
all
all
Full-key balancing

167.–
For legends and footnotes, see Page 2/70.
2/68
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Special versions
Options
Aluminum series 1LE10, 1PC10
Additional
identification
code -Z
with order
code and
plain text
if required
Motor category
Motor
version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
Non-standard shaft extension NDE 21)
Heating and ventilation
Sheet metal fan cover
Fan cover for textile industry
1LE1023
1LE1023 Eagle Line +
2
100
112
132
160
all
–
500.–
526.–
552.–
581.–
93.10
136.–
136.–
180.–
207.–
L06
L07
all, except %, ) and in combi- 93.10
nation with order code F90
all
all
798.–
all
all
232.–
798.–
232.–
916.–
255.–
916.–
255.–
1060.–
388.–
1320.–
388.–
L08
all
all
171.–
201.–
229.–
257.–
287.–
356.–
Y58 • and
all
identification
code
Y59 • and
all
identification
code
all
446.–
472.–
500.–
526.–
552.–
581.–
all
446.–
472.–
500.–
526.–
552.–
581.–
all, except %, ) and in combination with order code F90
all, except %, ) and in combination with order code F90
all, except %, ) and in combination with order code F90
all, except %, ), , and all
all
all
all
54.–
59.40
64.70
70.20
75.50
80.90
114.–
186.–
301.–
430.–
545.–
644.–
143.–
143.–
180.–
214.–
249.–
287.–
113.–
394.–
394.–
113.–
394.–
394.–
113.–
410.–
410.–
113.–
437.–
437.–
113.–
494.–
494.–
113.–
549.–
549.–
all except %, ), ,, - and
8-pole motors
all
all
all
all
all
all
39.50
39.50
39.50
39.50
39.50
39.50
20.10
40.20
70.80
20.10
40.20
70.80
20.10
40.20
103.–
20.10
40.20
125.–
20.10
40.20
159.–
20.10
40.20
198.–
all
39.50
39.50
39.50
39.50
39.50
39.50
all
39.50
39.50
39.50
39.50
39.50
39.50
all
–
–
39.50
39.50
39.50
39.50
all






all






all
27.30
27.30
27.30
27.30
27.30
27.30
all
65.–
65.–
65.–
65.–
65.–
65.–
all
all
300.–
300.–
300.–
300.–
300.–
300.–
300.–
300.–
300.–
300.–
300.–
300.–
F75
23) 29)
F76
Without external fan and without fan cover
Anti-condensation heating for 230 V
Anti-condensation heating for 115 V
Rating plate and extra rating plates
Extra rating plate for voltage tolerance 24)
F90
Q02
Q03
Metal external fan
1LE1002 (
1PC1002 )
1LE1021 Eagle Line *
1LE1011 ,
1LE1012 -
F74
22)
1LE1002
1PC1002
1LE1021
1LE1011
1LE1012
Motor type Frame size
80
90
1LE1. . . - . . . . . - . . . . -Z
1PC1. . . - . . . . . - . . . . -Z
Shaft and rotor
Shaft extension with standard dimensions L04
without feather keyway
L05
Second standard shaft extension
Standard shaft made of stainless steel
Concentricity of shaft extension in
accordance with DIN 42955 Tolerance R
Concentricity of shaft extension,
coaxiality and linear movement in
accordance with DIN 42955 Tolerance R
for flange-mounting motors
Non-standard shaft extension, DE 21)
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
1LE1001
1LE1001 $
1PC1001
1PC1001 %
1LE1003
1LE1003 &
B07
25)
Second rating plate, loose
Rating plate, stainless steel
Extra rating plate or rating plate with
deviating rating plate data
Motor version
all
M10
M11
Y80 • and
identification
code
Extra rating plate with identification
Y82 • and
all
codes
identification
code
all
Additional information on rating plate and Y84 • and
identification
on package label (max. 20 characters)
code
Adhesive label, supplied loose
Y85 • and
all
(content: Article No., Serial No.;
identification
2-line text)
code
Packaging, safety notes, documentation and test certificates
Printed German/English Operating
all
Instructions (compact) enclosed 27)
Printed German/English Operating
B01
all
Instructions (compact) enclosed in each
wire-lattice pallet 27)
Acceptance test certificate 3.1 in
B02
all
accordance with EN 10204 EN 10204 26)
B04
all
Printed German/English Operating
Instructions enclosed
B60
all
Document – Electrical data sheet
Document – Order dimension drawing
B61
all
–
For legends and footnotes, see Page 2/70.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/69
© Siemens AG 2015
SIMOTICS GP 1LE1/1PC1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Aluminum series 1LE10, 1PC10
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
10
Motor category
Motor
version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
2
20
On
request
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
1LE1001
1LE1001 $
1PC1001
1PC1001 %
1LE1003
1LE1003 &
1LE1002
1PC1002
1LE1021
1LE1002 (
1PC1002 )
1LE1021 Eagle Line *
1LE1023
1LE1023 Eagle Line +
1LE1011
1LE1012
Motor type Frame size
80
90
1LE1. . . - . . . . . - . . . . -Z
Motor version
1PC1. . . - . . . . . - . . . . -Z
Packaging, safety notes, documentation and test certificates (continued)
Type test with heat run for horizontal
B83
all
all
motors, without acceptance
B99
all
all
Wire-lattice pallet packaging
Connected in star for dispatch
M01
all
all
Connected in delta for dispatch
M02
all
all
1LE1011 ,
1LE1012 100
112
132
160
4720.–
5400.–
6070.–
6470.–
7020.–
7420.–






–
–
–
–
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


1)
With B5 flange, only possible in combination with H08.
2)
Not possible in combination with order code R15
"One metal cable gland".
3)
With H08 feet dimensions C and CA differ from EN 50347!
Further information find you in DT Configurator.
4)
In combination with motor protection (15th position of the Article No.) or
anti-condensation heating option, please inquire before ordering.
5)
Not possible in combination with voltage code 22 or 34.
6)
Cannot be used for motors in UL version (order code D31).
The grease lifetime specified in Catalog D 81.1 2013 in Section 1
"Introduction" refers to CT 40 °C. When the coolant temperature rises by 10
K, the grease service lifetime or relubrication interval is halved.
7)
A second shaft extension is not possible. Please inquire for mounted
brakes.
8)
For order codes F10, F11 and F12, the brake supply voltage must be
specified or ordered.
9)
All encoders are supplied with a protective cover as standard. The protective cover is omitted at the factory when a rotary pulse encoder is combined with a separately driven fan, because in this case the rotary pulse
encoder is installed under the fan cover.
In combination with a separately driven fan (order code F70) the
1XP8032-10 rotary pulse encoder is used instead of 1XP8012-10 or
1XP8032-20 is used instead of 1XP8012-20.
10)
Motors that are prepared for additional mountings (order codes G40, G41,
G42) are supplied without a protective cover as standard. If a protective
cover is requested as a cover or mechanical protection for mountings
provided by the customer, this can be ordered using order code G43.
Not possible in combination with order code L00 vibration quantity level B.
In combination with a separately driven fan (order code F70) the
1XP8032-10 rotary pulse encoder is used instead of 1XP8012-10 or
1XP8032-20 is used instead of XP8012-20.
17)
CCC certification is required for
– 2-pole motors ≤ 2.2 kW
– 4-pole motors ≤ 1.1 kW
– 6-pole motors ≤ 0.75 kW
– 8-pole motors ≤ 0.55 kW
18)
Possible up to 600 V max. The rated voltage is indicated on the rating
plate without voltage range. Order codes D30 and D31 do not authorize
importing into USA and Mexico. The North America export versions
Eagle Line 1LE1021 NEMA Energy Efficient and 1LE1023 NEMA Premium
Efficient are available for this purpose.
19)
In connection with mountings, the respective technical data must be
observed, please inquire before ordering.
20)
Not possible when brake is mounted.
21)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Not valid for: Conical shafts, non-standard threaded journals, non-standard shaft tolerances, friction welded
journals, extremely "thin" shafts, special geometry dimensions (e.g. square
journals), hollow shafts. Valid for non-standard shaft extensions DE or
NDE. The feather keys are supplied in every case. For order codes Y58,
Y59 and L05, the following applies:
- Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
- Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension.
22)
The special requirements of the textile industry regarding the sheet
metal cover
open up the possibility that a finger may be inserted between the cover
and enclosure. The customer must implement appropriate measures to
ensure that the installed system is "finger-safe".
23)
Converter-fed operation is permitted for 1LE1 motors with metal external
fans. The metal external fan is not possible in combination with the lownoise version – Order code F77 or F78.
11)
Order code H00 provides mechanical protection for encoders.
12)
Not possible in combination with brake 2LM8 – Order code F01.
13)
Not possible in combination with rotary pulse encoder HOG 9 D 1024l
(order code G05) and/or brake 2LM8 (order code F01).
24)
Can be ordered for 230 VΔ/400 VY or 400 VΔ/690 VY (voltage code "22" or
"34"). Not possible in combination with order code D34.
14)
Supplied with the condensation drainage holes sealed at the drive end DE
and non-drive end NDE (IP55, IP56, IP65). If the condensation drainage
holes are required for motors of the IM B6, IM B7 or IM B8 type of construction (feet on side or top), the motors must be ordered in the respective type
of construction and with order code H03, so that the condensation drainage
holes will be placed in the correct position.
25)
As adhesive label for frame sizes 80 and 90.
26)
The delivery time for the factory test certificate may differ from the delivery
time for the motor and it will be dispatched by email.
27)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/40761976.
28)
Not possible in combination with order code N05, N06, N07, N08 and N11.
29)
Order codes F70 and F76 cannot be combined
30)
Order code R50 is included in the order codes R70 and R71.
15)
16)
Motors that are prepared for additional mountings (order codes G40, G41,
G42) are supplied without a protective cover as standard. If a protective
cover is requested as a cover or mechanical protection for mountings
provided by the customer, this can be ordered using order code G43.
Not possible in combination with order code L00 vibration quantity level B.
Not possible for type of construction IM V3.
2/70
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times
times in
in working
working days:
days:
10
20
15
On
request
20
40
On
request
Options
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
■ Selection and ordering data
Special versions
Additional
identification code
-Z
with order
code and
plain text
if required
1LE1. . . - . . . . . - . . . . -Z
Motor protection (bearing protection)
Prepared for mounting a
Q05
SIPLUS CMS 1000
vibration sensor
2 × 3 temperature detectors Q32
for alarm and tripping
Installation of 1 Pt100 resisQ62
tance thermometer in stator
winding, two-wire circuit
Installation of 3 Pt100 resisQ63
tance thermometers in stator
winding, three-wire circuit 30)
Installation of 6 Pt100 resisQ64
tance thermometers in stator
winding, three-wire circuit 30)
Installation of 2 Pt100 screw-in Q72
resistance thermometers in
basic circuit for rolling-contact
bearings 2)
Installation of 2 Pt100 screw-in Q78
resistance thermometers in
3-wire circuit for rolling-contact
bearings
Installation of 2 Pt100 double Q79
screw-in resistance
thermometers in 3-wire circuit
for rolling-contact bearings
Motor connection and connection box
External grounding
H04
Connection box on NDE 27)
H08
Second external grounding
H70
Rotation of the connection box R10
through 90°, entry from DE
Rotation of the connection box R11
through 90°, entry from NDE
Rotation of the connection box R12
through 180°
One EMC cable gland
R14
One metal cable gland
R15
EMC cable gland, maximum R16
configuration
Stud terminal for cable conR17
nection, accessories pack (3
items)
Cable gland, max. configura- R18
tion
Saddle terminal for connection R19
without cable lug,
accessories pack
3 cables protruding,
R20 New!
0.5 m long
3 cables protruding,
R21
1.5 m long
R22 New!
6 cables protruding,
0.5 m long
R23
6 cables protruding,
1.5 m long
Motor category
Motor
Motor
version type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version type
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
71
80
90
100 112 132 160 180
200
225
250
Frame size
71
80
90
100
all
all
–
–
–
all
all
–
–
all
all
–
all
all
all
280
315
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
2
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
200
225
250
280
315
290.– 303.– 316.– 330.– 359.–
388.–
417.–
446.–
474.–
503.–
–
229.– 229.– 335.– 335.– 454.–
454.–
616.–
616.–
762.–
762.–
–
–
995.– 995.– 995.– 995.– 1270.– 1270.– 1270.– 1270.– 1270.– 1270.–
–
–
–
1240.– 1240.– 1240.– 1240.– 1910.– 1910.– 1910.– 1910.– 1910.– 1910.–
all
–
–
–
1920.– 1920.– 1920.– 1920.– 2820.– 2820.– 2820.– 2820.– 2820.– 2820.–
all
all
–
–
–
–
–
–
–
4100.– 4100.– 4100.– 4100.– 4100.– 4100.–
all
all
–
–
–
–
–
–
–
4500.– 4500.– 4500.– 4500.– 4500.– 4500.–
all
all
–
–
–
–
–
–
–
5400.– 5400.– 5400.– 5400.– 5400.– 5400.–
all
all
all
all
all
all
all
all
22.80
380.–
–
22.80
380.–
–
22.80
380.–
–





27.50 27.50 27.50 27.50 
490.– 490.– 580.– 650.– 920.–
O.R. O.R. O. R. O.R. 15.–




42.90
950.–
15.–
55.60
1000.– 1050.– 1100.– 1150.–
15.–
15.–
15.–
15.–
68.60 82.40 98.40 118.–
all
all







42.90
55.60
68.60
82.40
98.40
118.–
all
all







42.90
55.60
68.60
82.40
98.40
118.–
all
all
all
all
all
all
65.– *) 65.– *) 65.– *) 119.– 119.– 119.– 166.– 166.–
57.–
57.–
57.–
107.– 107.– 107.– 136.– 136.–
130.– *) 130.– *) 130.– *) 238.– 238.– 238.– 345.– 345.–
284.–
157.–
581.–
284.–
157.–
581.–
504.– 504.– 504.–
224.– 224.– 224.–
1040.– 1040.– 1040.–
all
all
–
–
–
143.–
143.–
180.–
all
all
82.– *) 82.– *) 82.– *) 151.– 151.– 151.– 199.– 199.–
229.–
229.–
397.–
397.–
397.–
all
all
–
–
–
–
–
–
–
700.–
700.–
700.–
all
all
54.60
54.60
54.60
65.40 78.40 95.80 113.– –
–
–
–
–
–
all
all
66.–
66.–
66.–
78.90 94.90 116.– 137.– O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
all
all
84.60
84.60
84.60
101.– 121.– 150.– 177.– –
–
–
–
–
–
all
all
108.–
108.–
108.–
129.– 156.– 189.– 225.– O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
–
–
–
112
–
–
132
–
–
160
–
–
180
–



For legends, see Page 2/77; for footnotes, see Page 2/78.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/71
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard
Standard delivery
delivery times
times in working days:
Options
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
Special versions
2
Additional
identification code
-Z
with order
code and
plain text
if required
Motor category
Motor
Motor
version type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version type
1LE1. . . - . . . . . - . . . . -Z
Motor connection and connection box (continued)
6 cables protruding, 3 m long R24
all
all
Reduction piece for M cable R30 New! all
all
gland in accordance with
British Standard, both cable
entries mounted
R50
all
all
Larger connection box
Terminal box without cable
R51
all
all
entry
Drilled detachable entry plate R52
all
all
Undrilled detachable entry
R53
all
all
plate
Auxiliary terminal box cast-iron R62
all
all
(small) 27)
Silicone-free version
R74
all
all
Abnormal through hole
Y61 • and all
all
3)
tapping (NPT or G threads)
identification code
Windings and insulation
Temperature class 155 (F),
N01
all
all
used acc. to 155 (F),
with service factor
Temperature class 155 (F),
N02
all
all
used acc. to 155 (F),
with increased output
Temperature class 155 (F),
N03
all
all
used acc. to 155 (F), with
increased coolant temperature
Temperature class 155 (F),
N05
all
all
used acc. to 130 (B),
coolant temperature 45 °C,
derating approx. 4 %
Temperature class 155 (F),
N06
all
all
used acc. to 130 (B),
coolant temperature 50 °C,
derating approx. 8 %
Temperature class 155 (F),
N07
all
all
used acc. to 130 (B),
coolant temperature 55 °C,
derating ca. 13 %
Temperature class 155 (F),
N08
all
all
used acc. to 130 (B),
coolant temperature 60 °C,
derating ca. 18 %
Temperature class 180 (H)
N10 New! all
all
Temperature class 180 (H) at N11
all
all
rated output and max.
4) 5)
CT 60 °C
Increased air humidity/
N20
all
all
temperature with 30 to 60 g
water per m3 of air
Increased air humidity/
N21
all
all
temperature with 60 to 100 g
water per m3 of air
Temperature class 155 (F),
Y50 •
all
all
used acc. to 130 (B), with
and
higher coolant temperature
specified
and/or site altitude
output,
CT .. °C or
SA …. m
above
sea level
10
15
10
20
On
request
20
40
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
71
80
90
100 112 132 160 180
200
225
250
280
315
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
Frame size
71
80
90
100
172.–
–
172.–
–
208.– 245.– 307.– 367.– O. R.
184.– 208.– 208.– 232.– –
172.–
–
112
132
160
180
200
225
250
280
315
O. R.
–
O. R.
–
O. R.
–
O. R.
–
O. R.
–
47.10 *) 47.10 *) 47.10 *) 274.– 274.– 319.– 355.– 1220.– 1580.– 1580.– 1810.– 1810.– 2130.–
–
–
–










–
–
–
–
–
–
–
–
–
–
–
–
260.–
260.–
280.–
280.–
280.–
280.–
465.–
465.–
465.–
465.–
485.–
485.–
–
–
–
270.– 270.– 270.– 270.– 270.–
270.–
270.–
270.–
270.–
270.–
–
–
–
–
–
–



148.– 148.– 148.– 148.– 193.–
257.–
321.–
340.–
383.–
340.–
515.–
340.–
638.–
40.–*)
40.–*)
40.–*)
46.–
46.–
61.20 61.20 78.–
78.–
88.60
88.60
104.–
104.–
40.–*)
40.–*)
40.–*)
46.–
46.–
61.20 61.20 78.–
78.–
88.60
88.60
104.–
104.–
40.–
40.–
40.–
46.–
46.–
61.20 61.20 78.–
78.–
88.60
88.60
104.–
104.–
40.– *) 40.– *) 40.– *) 46.–
46.–
61.20 61.20 78.–
78.–
88.60
88.60
104.–
104.–
40.– *) 40.– *) 40.– *) 46.–
46.–
61.20 61.20 78.–
78.–
88.60
88.60
104.–
104.–
62.50 *) 70.80 *) 83.30 *) 103.– 125.– 159.– 198.– 255.–
311.–
460.–
580.–
742.–
964.–
110.– *) 124.– *) 146.–*) 180.– 219.– 278.– 347.– 445.–
530.–
890.–
1300.– 1390.– 1730.–
210.– *) 210.– *) 210.– *) 245.– 290.– 385.– 470.– 865.–
210.– *) 210.– *) 210.– *) 245.– 290.– 385.– 470.– 865.–
935.–
935.–
1360.– 1560.– 2170.– 2340.–
1360.– 1560.– 2170.– 2340.–
141.– *) 141.– *) 141.– *) 141.– 141.– 141.– 214.– 944.–
1200.– 1460.– 1790.– 2180.– 2670.–


–
–


–
–
–
275.– 309.– 334.– 444.– 4300.– 4690.– 5450.– 7190.– 8280.– 11800.–
–
–
–
154.– 186.– 240.– 295.– 382.–
469.–
690.–
868.–
1110.– 1440.–
For legends, see Page 2/77; for footnotes, see Page 2/78.
2/72
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times
times in
in working
working days:
days:
10
20
15
On
request
20
Special versions
40
Additional
identification code
-Z
with order
code and
plain text
if required
1LE1. . . - . . . . . - . . . . -Z
Windings and insulation (continued)
Temperature class 155 (F),
Y52 • and
used acc. to 155 (F),
identifica5)
other requirements
tion code
Y75 •
Temperature class 180 (H),
and
used acc. to 155 (F)
specified
output,
CT .. °C or
SA …. m
above
sea level
Colors and paint finish
Standard finish in RAL 7030
stone gray
Unpainted
(only cast-iron parts primed)
Unpainted, only primed
Special finish sea air resistant
Special paint for use offshore
Inner varnishing
Special finish in RAL 7030
stone gray
S00
On
request
Motor category
Motor
Motor
version type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version type
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
71
80
90
100 112 132 160 180
200
225
250
100
112
132
180
200
225
250
280
315
all
all
39.50 *) 39.50 *) 39.50 *) 46.–
46.–
61.20 61.20 78.–
78.–
89.–
89.–
104.–
104.–
all
all
210.– 210.– 210.– 245.– 290.– 385.– 470.– 865.–
935.–
1360.– 1560.– 2170.– 2340.–


























19.90
625.–*)
1950.–*)
–
73.60
19.90
625.–*)
1950.–*)
–
73.60
26.50
625.–*)
1950.–*)
–
98.30
26.50
658.–
2050.–
85.–
98.30
26.50
658.–
2160.–
85.–
98.30
42.20
703.–
2270.–
85.–
129.–
42.20
703.–
2390.–
85.–
129.–
79.30
718.–
2510.–
85.–
180.–
79.30
739.–
2640.–
85.–
225.–
79.30
771.–
3050.–
85.–
334.–
79.30
798.–
3970.–
105.–
404.–
79.30
825.–
4970.–
120.–
497.–
79.30
851.–
7680.–
130.–
638.–
550.–
659.–
659.–
745.– 745.– 745.– 787.– 787.–
787.–
787.–
848.–
848.–
848.–
79.30
79.30
79.30
90.30
121.–
194.–
225.–
334.–
404.–
497.–
638.–
only possible for
Basic Line $, &,
), and +
all
all
all
all
all
all
all
all
all
all
all; standard
version for
Performance Line
%, (, * and ,
Y51 • and all
all
special
finish
RAL….
S01
S03
S04
S05
S10
Special finish in special RAL
colors: For RAL colors, see
"Special finish in special
RAL colors" (see Catalog
D 81.1 Part 1)
Standard finish in other
Y53 • and
standard RAL colors:
standard
RAL 1002, 1013, 1015, 1019, finish
2003, 2004, 3000, 3007, 5007, RAL….
5009, 5010, 5012, 5015, 5017,
5018, 5019, 6011, 6019, 6021,
7000, 7001, 7004, 7011, 7016,
7022, 7031, 7032, 7033, 7035,
9001, 9002, 9005 (see Catalog
D 81.1 Part 1)
Special finish in other
Y54 • and
standard RAL colors: RAL
special
1002, 1013, 1015, 1019, 2003, finish
2004, 3000, 3007, 5007, 5009, RAL….
5010, 5012, 5015, 5017, 5018,
5019, 6011, 6019, 6021, 7000,
7001, 7004, 7011, 7016, 7022,
7031, 7032, 7033, 7035, 9001,
9002, 9005 (see Catalog
D 81.1 Part 1)
Modular technology – Basic versions 6)
Mounting of holding brake
F01
(standard assignment)
Options
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
280
315
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
2
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
Frame size
71
80
90
160
only possible for
Basic Line $, &,
), and +
21.– *) 21.– *) 21.– *) 33.–
all
all
58.30
58.30
58.30
98.30 98.30 129.– 129.– 180.–
all
all
–
–
–
625.– 760.– 980.– 1940.– 4290.– 6000.– 7620.– 24400.– 30100.– 36100.–
F40
all
all
–
–
–
–
–
5200.– 5500.– 5790.– 5790.– 6000.– 6600.– 7650.– 9100.–
F41
all
all
–
–
–
–
–
5200.– 5500.– 5790.– 5790.– 6000.– 6600.– 7650.– 9100.–
F70
all
all
–
–
–
685.– 815.– 940.– 1090.– 1300.– 2030.– 2790.– 3430.– 4070.– 4560.–
G01
all
all
688.– *) 688.– *) 688.– *) 703.– 703.– 760.– 760.– 625.–
33.–
33.–
33.–
7) 31) 32)
Return stop, ramp-down left
blocked, direction of rotation right
Return stop, ramp-down right
blocked, direction of rotation left
Mounting of separately driven
fan 28)
Mounting of 1XP8012-10 (HTL)
rotary pulse encoder 8) 9)
Mounting of 1XP8012-10 (HTL)
rotary pulse encoder 8) 9)
G02
all
all
980.–
*)
980.–
*)
980.–
*)
974.– 974.– 1030.– 1030.– 897.–
625.–
1430.– 1430.– 1430.– 1430.–
897.–
1960.– 1960.– 1960.– 1960.–
For legends, see Page 2/77; for footnotes, see Page 2/78.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/73
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard
Standard delivery
delivery times
times in working days:
Options
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
Special versions
2
Additional
identification code
-Z
with order
code and
plain text
if required
Motor category
Motor
Motor
version type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version type
1LE1. . . - . . . . . - . . . . -Z
Modular technology – Additional versions
Brake supply voltage 24 V DC F10
all
all
Brake supply voltage 230 V
F11
all
all
AC, 50/60 Hz
Brake supply voltage Brake
F12
all
all
supply voltage 400 V AC,
50/60 Hz 32)
Mechanical manual brake
F50
all
all
release with lever (no locking)
5)
Special technology
Mounting of LL 861 900 220 G04
all
all
rotary pulse encoder 10)
Mounting of HOG 9 D 1024 I G05
all
all
rotary pulse encoder 10)
Mounting of HOG 10 D 1024 I G06
all
all
rotary pulse encoder 10)
Mounting of POG10D rotary
G07
all
all
pulse encoder (only possible in
combination with a separately
driven fan or brake) 1)
Mounting of POG9 rotary
G08
all
all
pulse encoder (only possible
in combination with a separately driven fan or brake) 11)
Mounting of HOG 10 DN 1024 I G15 New! all, except in
rotary pulse encoder, terminal
combination with
box protection against humidity
order code F90
Mounting of HOG 10 DN 1024 I G16 New! all, except in
rotary pulse encoder, terminal
combination with
box protection against dust
order code F90
Mounting a special type of
Y70 • and all
all
rotary pulse encoder
identification code
all, except in
Mounting of HOG 10 DN 1024 I Y74 •
and
combination with
rotary pulse encoder +
centrifugal switch, (speed .... specified order code F90
rpm), terminal box protection speed
.... rpm
against humidity
Mounting of HOG 10 DN 1024 I Y76 •
all, except in
rotary pulse encoder +
and
combination with
centrifugal switch, (speed .... specified order code F90
rpm), terminal box protection speed
against dust
.... rpm
Mounting of HOG 10 DN 1024 I Y79 • and all, except in
rotary pulse encoder +
specified combination with
ESL 93, (speed .... rpm),
speed
order code F90
terminal box protection
(max 3)
against dust
.... rpm
Mechanical design and degrees of protection
Low-noise version for
F77
all
all
2-pole motors with clockwise
direction of rotation
Low-noise version for
F78
all
all
2-pole motors with counterclockwise direction of rotation
Prepared for mountings,
G40
all
all
center hole only
Prepared for mountings
G41
all
all
with shaft D12
Prepared for mountings
G42
all
all
with shaft D16
Protective cover for encoder G43
all
all
(supplied loose – only for
mountings with order codes
G40, G41 and G42)
10
15
10
20
On
request
20
40
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
71
80
90
100 112 132 160 180
200
225
250
280
315
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
Frame size
71
80
90
100
–
–
–
–
–
–
–
–
–
–
–
–
112
200
225
250
280
315
50.40 50.40 50.40 50.40 67.20
67.20
67.20
67.20
67.20
67.20






50.40 50.40 50.40 50.40 67.20
67.20
67.20
67.20
67.20
67.20
–
251.– 251.– 280.– 406.– 590.–
688.–
826.–
940.–
1040.– 1320.–
–
–
2910.– 2910.– 2970.– 2970.– 2850.– 2850.– 4640.– 4640.– 4640.– 4640.–
–
–
–
3370.– 3370.– 3420.– 3420.– 3660.– 3660.– 4810.– 4810.– 4810.– 4810.–
–
–
–
4350.– 4350.– 4440.– 4440.– 4370.– 4370.– 5710.– 5710.– 5710.– 5710.–
–
–
–
–
–
–
–
6070.– 6100.– 6130.– 6170.– 6210.– 6270.–
–
–
–
–
–
–
–
14000.– 14200.– 17100.– 17100.– 17100.– 17100.–
–
–
–
5310.– 5360.– 5390.– 5420.– 5460.– 5490.– 5520.– 5560.– 5610.– 5650.–
–
–
–
5310.– 5360.– 5390.– 5420.– 5460.– 5490.– 5520.– 5560.– 5610.– 5650.–
–
–
–
O. R. O. R. O. R. O. R. O. R.
–
–
–
–
–
–
–
8390.– 8410.– 8450.– 8480.– 8530.– 8580.–
–
–
–
–
–
–
–
8390.– 8410.– 8450.– 8480.– 8530.– 8580.–
–
–
–
–
–
–
–
14300.– 14400.– 14600.– 14800.– 14900.– 15000.–
–
–
–
–
–
595.– 595.– 794.–
1440.– 1600.– 1700.– 2200.– 2600.–
–
–
–
–
–
595.– 595.– 794.–
1440.– 1600.– 1700.– 2200.– 2600.–

132

160

180

O. R.
O. R.
O. R.
O. R.
O. R.
66.70 *) 66.70 *) 66.70 *) 66.70 66.70 88.50 102.– 





136.– *) 136.– *) 136.– *) 136.– 136.– 180.– 207.– 880.–
880.–
880.–
880.–
880.–
880.–
136.– *) 136.– *) 136.– *) 136.– 136.– 180.– 207.– 880.–
880.–
880.–
880.–
880.–
880.–
68.80 *) 68.80 *) 68.80 *) 76.80 76.80 134.– 134.– 202.–
202.–
202.–
202.–
202.–
202.–
For legends, see Page 2/77; for footnotes, see Page 2/78.
2/74
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times
times in
in working
working days:
days:
10
20
15
Special versions
On
request
20
40
Additional
identification code
-Z
with order
code and
plain text
if required
On
request
Motor category
Motor
Motor
version type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version type
1LE1. . . - . . . . . - . . . . -Z
Mechanical design and degrees of protection (continued)
Protective cover 8) 10) 12)
H00
all
all
Screwed-on feet
H01
all
all
(instead of cast)
Vibration-proof version
H02
all
all
(continuous vibration resistance
according to class 3M4 in
accordance with IEC 721-3-3:
1994)
Condensation drainage holes H03
all
all
Rust-resistant screws
H07
all
all
(externally)
14)
IP65 degree of protection
H20
all
all
IP54 degree of protection
H21
all
all
IP56 degree of protection 15) H22
all
all
Drive-end seal for flangeH23
all
all
mounting motors, oil-tight
to 0.1 bar
Grounding brush for
L52
all
all
converter-fed operation
Next larger standard flange
P01
all
all
Coolant temperature and site altitude
Coolant temperature
D02
all
all
–50 to +40 °C,
IP54 degree of protection
Coolant temperature
D03
all
all
-40 to +40 °C 16)
Coolant temperature
D04
all
all
-30 to +40 °C 17)
Designs in accordance with standards and specifications
VIK version
C02
all
all
Electrical according to
D30
all; standard verNEMA MG1-12 18)
sion for Eagle Line
), *, + and ,
Design according to UL with D31
all; standard ver"Recognition Mark" 18)
sion for Eagle Line
), *, + and ,
China Energy Efficiency Label D34
all
all
Canadian regulations (CSA) 7) D40
all; standard version for Eagle Line
), *, + and ,
Bearings and lubrication
Regreasing device with
L19 New! all, for Performance
M10X1 lubrification nipple
Line %, (, * and
, without addiacc. to DIN 71412-A
tional charge
Located bearing DE
L20
all
all
Located bearing NDE
L21
all
all
Bearing design for increased L22
all
all
cantilever forces
1)
Regreasing device
L23
all; standard version
for Performance Line
from FS 160 %, (,
* and ,
High temperature grease
L24
all
all
Special bearing for DE and
L25
all; standard version
19)
NDE, bearing size 63
for Performance Line
%, (, * and ,
On both DE and NDE
L28
all
all
increased bearings,
DE bearings for increased
cantilever forces
Options
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
71
80
90
100 112 132 160 180
200
225
250
280
315
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
2
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
Frame size
71
80
90
100
54.–
–
54.–
–
78.40 78.40 137.– 137.– 183.–
99.50 108.– 117.– 125.– 353.–
54.–
–
112
132
160
180
200
225
250
280
315
275.–
416.–
364.–
492.–
455.–
731.–
546.–
821.–
729.–
946.–
123.– *) 141.– *) 160.– *) 180.– 199.– 216.– 234.– 1000.– 1060.– 1100.– 1180.– 

62.– *) 64.40 *) 71.80 *) 




54.– *) 65.– *) 65.– *) 78.70 78.70 93.10 93.10 107.–
*)
*)
*)





121.–
162.–
193.–
201.–
267.–
644.–
800.–
707.–
455.–
143.–
–
158.– *)
43.60
143.–
–
158.– *)
46.–
143.–
–
158.– *)
49.20
143.–
–
158.–
54.80
143.–
–
158.–
59.90
143.–
–
158.–
73.10
214.–
–
235.–
107.–
287.–
800.–
313.–
138.–
356.–
800.–
393.–
171.–
430.–
800.–
473.–
227.–
502.–
800.–
551.–
302.–
572.–
800.–
631.–
379.–
–
–
–
–
–
–
–
–
–
–
–
2500.– 2500.–
–
–
–
45.40 56.70 56.70 –
–
–
–
–
–
–
–
–
700.– 750.– 900.– 1050.– 2470.– 2640.– 3810.– 4240.– 5140.– 6090.–
220.–
245.–
307.–
367.– 465.– 539.– 618.– 686.–
796.–
1020.– 1260.– 1800.– 2320.–
41.–
54.–
54.–
67.40 67.40 80.90 80.90 108.–
135.–
135.–
1260.– 1800.– 2320.–
–
–
–
–
–
–
208.– 241.– 308.– 389.– 556.–
38.60 38.60 38.60 38.60 66.–
698.–
66.–
841.–
66.–
1080.– 1460.– 1940.–
82.40 82.40 98.90
–
–
–
96.10 114.– 146.– 178.– 285.–
391.–
492.–
581.–
719.–
939.–
–
–
–
–
–
–






96.10 114.– 146.– 178.– 241.–
321.–
402.–
483.–
643.–
797.–
–
–
–
–
364.–
410.–
455.–
546.–


37.90 *) 37.90 *) 40.20 *) 69.30 82.10 101.– 138.– 291.–
37.90 *) 37.90 *) 40.20 *) 42.– 44.30 46.90 

70.– *) 77.– *) 85.– *) 95.90 112.– 126.– 167.– 265.–
404.–
568.–
731.–
946.–
1020.–





307.–
346.–
400.–
448.–
500.–
–
302.– 310.– 319.– 346.– 364.–
410.–
455.–
546.–


–
–
–
O.R. O.R. O.R. O.R. O. R.
130.– *) 160.– *) 193.– *) 193.– 225.– 252.– 336.– 446.–
O. R.
549.–
O. R.
780.–
O. R. O. R.
1080.– 
–
856.–
1190.– 1480.– 2780.– 2430.–
–
–
–
–
–

–
–

–
–

–
–

711.–
–
O. R.

For legends, see Page 2/77; for footnotes, see Page 2/78.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/75
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard
Standard delivery
delivery times
times in working days:
Options
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
Special versions
Additional
identification code
-Z
with order
code and
plain text
if required
2
1LE1. . . - . . . . . - . . . . -Z
Bearings and lubrication (continued)
Increased maximal speed
L37 New!
Bearing insulation DE
L50
Bearing insulation NDE
L51
Measuring nipple for SPM
Q01
shock pulse measurement for
bearing inspection 1)
Balance and vibration quantity
Vibration quantity level A
Vibration quantity level B 20)
L00
Half-key balancing (standard)
Balancing without key,
L01
key is supplied
Full-key balancing
L02
Shaft and rotor
Shaft extension with standard L04
dimensions, without feather
keyway
Second standard shaft
L05
extension
Standard shaft made of
L06
stainless steel
Concentricity of shaft
L07
extension in accordance with
DIN 42955 Tolerance R
Concentricity of shaft
L08
extension, coaxiality and linear
movement in accordance with
DIN 42955 Tolerance R for
flange-mounting motors
Non-standard shaft extension, Y58 • and
DE 21)
identification code
Non-standard shaft extension, Y59 • and
21)
NDE
identification code
Special shaft steel
Y60 • and
identification code
Heating and ventilation
Sheet metal fan cover
F74
Metal external fan 22) 28)
F76
Without external fan and
F90 New!
without fan cover
Q02
Anti-condensation heating
for 230 V
Anti-condensation heating
Q03
for 115 V
Separately driven fan with
Y81 • and
non-standard voltage and/or identificafrequency
tion code
Rating plate and extra rating plates
Extra rating plate for voltage B07
tolerance 23)
Second rating plate, loose
Rating plate, stainless steel
M10
M11
10
15
10
20
On
request
20
40
Motor category
Motor
Motor
version type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version type
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
71
80
90
100 112 132 160 180
200
225
250
Frame size
71
80
90
100
112
132
160
180
200
225
all
all
all
all
all
all
all
all
–
–
–
–
–
–
–
–
–
–
–
–
O. R.
–
–
245.–
O. R.
–
–
274.–
O. R.
–
–
302.–
O. R.
–
–
333.–
O. R.
–
–
359.–
O. R.
–
–
388.–
all
all
all
all
all
all
all
all








230.–
243.–
257.–
270.– 312.– 399.– 494.– 775.–






20.80
20.80
20.80
27.–
27.–
31.90 31.90 41.60
all
all
91.50
91.50
106.–
all
all
–
–
–
all
all
80.80
280
315
250
280
315
O. R.
1680.–
1680.–
417.–
O. R.
1800.–
1800.–
446.–
O. R.
1860.–
1860.–
474.–
O. R.
1950.–
1950.–
503.–





780.–
856.–
1090.– 1270.– 1630.–





41.60
56.40
56.40
68.60
79.60
106.– 106.– 122.– 122.– 154.–
154.–
199.–
199.–
199.–
199.–
500.– 526.– 552.– 581.– 674.–
742.–
809.–
877.–
944.–
1010.–
136.– 136.– 180.– 207.– 313.–
347.–
365.–
381.–
450.–
494.–
160.– 220.– 340.– 540.– 643.–
959.–
1320.– 1570.– 2620.– 3190.–
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
93.10
*)
140.–
*)

all
all
120.–
all
all
232.–
232.–
232.–
255.– 255.– 388.– 388.– 201.–
226.–
269.–
352.–
352.–
538.–
all
all
144.–
171.–
201.–
229.– 257.– 287.– 356.– 430.–
502.–
572.–
644.–
717.–
787.–
all
all
417.–
446.–
472.–
500.– 526.– 552.– 581.– 674.–
742.–
809.–
877.–
944.–
1010.–
all
all
417.–
446.–
472.–
500.– 526.– 552.– 581.– 674.–
742.–
809.–
877.–
944.–
1010.–
all
all
–
–
–
O. R. O. R. O. R. O. R. O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
all; standard version 50.–
for Performance
Line %, (, * and
,
all
all
143.–
all
all
113.–
54.–
59.40
64.70 70.20 75.50 80.90 80.60
99.30
111.–
159.–
204.–
224.–
143.–
113.–
143.–
113.–
180.– 214.– 249.– 287.– 322.–
113.– 113.– 113.– 113.– 113.–
356.–
113.–
393.–
113.–
430.–
113.–
465.–
113.–
502.–
113.–
all
all
394.–
394.–
394.–
410.– 437.– 494.– 549.– 608.–
699.–
839.–
866.–
866.–
902.–
all
all
394.–
394.–
394.–
410.– 437.– 494.– 549.– 608.–
699.–
839.–
866.–
866.–
902.–
all
all
–
–
–
–
–
460.–
580.–
742.–
964.–
39.50
39.50
39.50 39.50 39.50 39.50 66.–
66.–
66.–
82.40
82.40
104.–
20.10
40.20
20.10
40.20
20.10 20.10 20.10 20.10 64.40
40.20 40.20 40.20 40.20 49.10
64.40
49.10
64.40
66.–
64.40
66.–
64.40
66.–
64.40
66.–
all, with the
39.50
exception of
8-pole motors
all
all
20.10
all, for Performance 40.20
Line %, (, * and
, standard
120.–
93.10
*)

–
–
–
–
For legends, see Page 2/77; for footnotes, see Page 2/78.
2/76
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Standard delivery times
times in
in working
working days:
days:
10
20
15
On
request
20
Special versions
40
Additional
identification code
-Z
with order
code and
plain text
if required
On
request
Motor category
Motor
Motor
version type
(castiron)
IE2 High 1LE1501
Efficiency 1LE1601
IE3
1LE1503
Premium 1LE1603
Efficiency
NEMA
1LE1521
Energy
1LE1621
Efficient
NEMA
1LE1523
Premium 1LE1623
Efficient
Motor
Motor
version type
Options
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
71
80
90
100 112 132 160 180
200
225
250
280
315
1LE1501 Basic Line $
1LE1601 Performance Line %
1LE1503 Basic Line &
1LE1603 Performance Line (
1LE1521 Eagle Line Basic )
1LE1621 Eagle Line Performance *
2
1LE1523 Eagle Line Basic +
1LE1623 Eagle Line Performance ,
Frame size
1LE1. . . - . . . . . - . . . . -Z
71
80
Rating plate and extra rating plates (continued)
Extra rating plate or rating
Y80 • and all
all
70.80 70.80
plate with deviating rating
identificaplate data
tion code
Extra rating plate with
Y82 • and all
all
39.50 39.50
identification codes
identification code
Additional information on
Y84 • and all
all
39.50 39.50
rating plate and on package identificalabel (max. 20 characters)
tion code
Adhesive label, supplied loose Y85 • and all
all
–
–
(content: Article No.,
identificaSerial No.; 2-line text)
tion code
Extension of liability for defects
Extension of the liability for
Q80
all, for Performance –
–
defects by 12 months to a total
Line %, (, * and
, 36 months
of 24 months (2 years) from
standard
delivery 24)
Extension of the liability for
Q82
all, for Performance –
–
defects by 24 months to a total
Line %, (, * and
, 36 months
of 36 months (3 years) from
standard
delivery 24)
Packaging, safety notes, documentation and test certificates
Acceptance test certificate 3.1 B02
all
all
27.30 27.30
in accordance with EN 10204
90
100
70.80
112
132
160
180
200
225
250
280
315
103.– 125.– 159.– 198.– 255.–
311.–
460.–
580.–
742.–
964.–
39.50
39.50 39.50 39.50 39.50 66.–
66.–
66.–
82.40
82.40
104.–
39.50
39.50 39.50 39.50 39.50 66.–
66.–
66.–
82.40
82.40
104.–
–
39.50 39.50 39.50 39.50 64.40
64.40
64.40
64.40
64.40
64.40
–
–
–
–
–
2.3 %
2.3 %
2.3 %
2.3 %
2.3 %
2.3 %
–
–
–
–
–
4.6 %
4.6 %
4.6 %
4.6 %
4.6 %
4.6 %
27.30
27.30 27.30 27.30 27.30 27.30
27.30
27.30
27.30
27.30
27.30
65.–
65.–
65.–
65.–
65.–
25)
Printed German/English
Operating Instructions
(compact) enclosed 26)
Document –
Electrical data sheet
Document –
Order dimension drawing
Standard test (routine test)
with acceptance
Type test with heat run for
horizontal motors, without
acceptance
Type test with heat run for
horizontal motors, without
acceptance
Connected in star for dispatch
Connected in delta for
dispatch
B04
all
all
–
–
–
65.–
B60
all
all
–
–
–
300.– 300.– 300.– 300.– 300.–
300.–
300.–
300.–
300.–
300.–
B61
all
all
–
–
–
300.– 300.– 300.– 300.– 300.–
300.–
300.–
300.–
300.–
300.–
B65
all
all
–
–
–
all
all
–
–
–
3700. 3700. 3700. 3700. 3700.– 3700.– 3700.– 3700.– 3700.– 3700.–
–
–
–
–
– *)
– *)
– *)
– *)
– *)
– *)
– *)
– *)
– *)
– *)
B83
all
all
–
–
–
6070.– 6470.– 7020.– 7420.– 9400.– 9400.– 12400.– 12400.– 13600.– 13600.–
M01
M02
all
all
all
all
22.80
22.80
22.80
22.80
22.80
22.80
27.50 27.50 27.50 27.50 36.10
27.50 27.50 27.50 27.50 36.10
B82
New!
65.–
65.–
65.–
65.–
36.10
36.10
36.10
36.10
44.70
44.70
44.70
44.70
44.70
44.70
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


For footnotes, see Page 2/78.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/77
© Siemens AG 2015
SIMOTICS SD 1LE1 Standard Motors
Supplements to article numbers and special versions
Options
Cast-iron series 1LE15 Basic Line, 1LE16 Performance Line
Standard delivery times in working days:
10
20
On
request
2
*)
Estimated delivery date from stock at the end of 2014.
1)
Up to frame size 160 not possible when brake is mounted.
2)
Evaluation with appropriate tripping unit (see Catalog IC 10) is
recommended.
3)
4)
18)
Possible up to 600 V max. The rated voltage is indicated on the rating
plate without voltage range. Order codes D30 and D31 do not authorize
importing into USA and Mexico. The North America export versions Eagle
Line 1LE1521/1LE1621 NEMA Energy Efficient and 1LE1523/1LE1623
NEMA Premium Efficient are available for this purpose.
Parallel Whitworth threaded pipe DIN ISO 228 (DIN 259) BSPP (British
Standard Pipe Parallel) Threaded pipe for connections not sealed in the
thread (cylindrical), external = G.
19)
For Performance Line motors (all frame sizes) and Basic Line motors
(from frame size 280) in the standard version.
20)
Cannot be used for motors in UL version (order code D31). The grease
lifetime specified in Part 1 "Introduction" refers to CT 40 °C. When the
coolant temperature rises by 10 K, the grease service lifetime or
relubrication interval is halved.
On request for 2-pole motors (concerns SA 225-315).
21)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Not valid for: Conical shafts, non-standard threaded journals, non-standard shaft tolerances, friction welded
journals, extremely "thin" shafts, special geometry dimensions (e.g. square
journals), hollow shafts. Valid for non-standard shaft extensions DE or
NDE. The feather keys are supplied in every case. For order codes Y58,
Y59 and L05, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension.
22)
Converter-fed operation is permitted for 1LE1 motors with metal external
fans.
23)
Can be ordered for 230 VΔ/400 VY or 400 VΔ/690 VY (voltage code "22" or
"34"). Not possible for pole-changing motors, naturally cooled 1PC1
motors, 8-pole motors and in combination with order code D34.
24)
Wear parts (bearing) are excluded from the warranty extension.
25)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
26)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300.
27)
With H08 feet dimensions C and CA differ from EN 50347! Further information find you in DT Configurator (see Appendix in the Section "Tools and
engineering").
28)
Order codes F70 and F76 cannot be combined.
29)
Not possible in combination with order codes Q72 and Q78.
30)
With frame sizes 100 to 132 only possible in combination with order code
R50.
31)
Not possible in combination with order code N05, N06, N07, N08 and N11.
32)
With frame size 315 in case of combination of order codes F01 and F12
the rectifier for the brake will be delivered as single part.
5)
Not possible for 1LE15 and 1LE16 motors with increased output.
6)
A second shaft extension is not possible. Please inquire for mounted
brakes.
7)
For order codes F10, F11 and F12, the brake supply voltage must be
specified or ordered.
8)
The 1XP8 rotary pulse encoders are fitted with a protective cover as
standard. The protective cover is omitted at the factory when a rotary
pulse encoder is combined with a separately driven fan, because in this
case the rotary pulse encoder is installed under the fan cover.
9)
In combination with a separately driven fan (order code F70) the
1XP8032-10 rotary pulse encoder is used instead of 1XP8012-10 or
1XP8032-20 is used instead of 1XP8012-20.
10)
11)
The LL and HOG rotary pulse encoders up to frame size 160 are fitted with
a protective cover as standard. The protective cover is omitted at the
factory when a rotary pulse encoder is combined with a separately driven
fan, because in this case the rotary pulse encoder is installed under the
fan cover.
Option (encoder mounting) is only possible for motors with a mounted
separately driven fan or for naturally cooled motors (without a separately
driven fan). This option can be used in combination with brakes of type
KFB! This option cannot be used in combination with brakes of type 2LM8!
12)
Order code H00 provides mechanical protection for encoders.
13)
Not possible for type of construction IM V3.
14)
Not possible in combination with rotary pulse encoder HOG 9 D 1024l
(order code G05) and/or brake 2LM8 (order code F01).
15)
16)
17)
Not possible in combination with brake 2LM8 – Order code F01.
In connection with mountings, the respective technical data must be
observed, please inquire before ordering.
The rated voltage is indicated on the rating plate without voltage range.
Order code D40 does not authorize importing into Canada. The North
America export versions Eagle Line 1LE1521/1LE1621 NEMA Energy
Efficient and 1LE1523/1LE1623 NEMA Premium Efficient are available for
this purpose.
2/78
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Options – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
■ Selection and ordering data
Special versions
Additional
identification code
-Z
with order
code and
plain text
if required
1L . . . . . - . . . . . -Z
1PP . . . . - . . . . . -Z
Motor protection
Motor protection with PTC
A11
thermistors with 3 embedded
temperature sensors for
tripping 1)
A12
Motor protection with PTC
thermistors with 6 embedded
temperature sensors for
alarm and tripping 1)
Motor temperature detection A23
with embedded temperature
sensor KTY 84-130 1)
Motor temperature detection A25
with embedded temperature
sensors 2 x KTY 84-130 1)
Temperature detectors for
A31
tripping 1)
Installation of 3 Pt100
A60
resistance thermometers 1)
Motor connection and connection box
ECOFAST motor connector
G55
Han-Drive 10e for
230 VΔ/400 VY 2)
G56
ECOFAST motor connector
EMC-safe Han-Drive 10e
for 230 VΔ/400 VY 3)
Connection box
K09
on RHS
Connection box
K10
on LHS
One metal cable gland
K54
Cable gland, max.
configuration
Rotation of the connection
box through 90°,
entry from DE
Rotation of the connection
box through 90°,
entry from NDE
Rotation of the connection
box through 180°
Next larger connection box
External grounding
3 cables protruding,
0.5 m long 4)5)
3 cables protruding,
1.5 m long 4)5)
6 cables protruding,
0.5 m long 4)
6 cables protruding,
1.5 m long 4)
6 cables protruding,
3 m long 4)
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
For converterfed
operation only
Motor version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
63
71
80
90
100
112
132
160
180
200
1LA9
1LA9 $
225
–
1LA7/1LA5
1LA9
1PP7/1PP5
1LP7/1LP5
1LA9
1LA7 %
1LA9 with increased output (
1PP7 )
1LP7 +
1LA9 -
1LA5 &
1PP5 *
1LP5 ,
2
–
1LA7/1LA5 1LA7 .
1LA7/1LA5
Motor type Frame size
63
71
1LA5 /
1LA5 1
1LA7 0
80
90
100
112
132
160
180
200
225
all
all
89.30 89.30 104.–
104.–
119.–
119.–
178.–
178.–
236.–
236.–
322.–
all
all
152.–
175.–
175.–
203.–
203.–
271.–
271.–
417.–
417.–
542.–
all
all
89.30 89.30 104.–
104.–
119.–
119.–
178.–
178.–
335.–
335.–
459.–
all
all
179.–
179.–
209.–
209.–
238.–
238.–
356.–
356.–
544.–
544.–
748.–
all except 0 and 1
104.–
104.–
121.–
121.–
137.–
137.–
201.–
201.–
278.–
278.–
376.–
all except 0 and 1
–
–
–
–
1500.– 1500.– 1500.– 1500.– 1500.– 1500.– 1500.–
all except ., /, 0 and 1
99.10 99.10 99.10 99.10 99.10 99.10 107.–
–
–
–
–
all except (, ., /, 0
and 1
218.–
218.–
218.–
218.–
237.–
237.–
267.–
–
–
–
–
all
all
–
–
37.–
43.40 111.–
122.–
131.–
140.–
199.–
234.–
277.–
all
all
–
–
37.–
41.70 107.–
116.–
127.–
135.–
191.–
225.–
266.–
K55
all except $, ( and only valid for $, ( and all except ) and *
61.60 61.60 61.60 61.60 115.–
–
–
61.60 61.60 115.–
88.10 88.10 88.10 88.10 163.–
115.–
115.–
163.–
115.–
115.–
163.–
147.–
147.–
215.–
147.–
–
215.–
170.–
–
248.–
170.–
–
248.–
K83
all
all
16.80 18.60 20.40 24.–
61.–
75.90 101.–
124.–
46.40 60.10 74.20
K84
all
all
16.80 18.60 20.40 24.–
61.–
75.90 101.–
124.–
46.40 60.10 74.20
K85
all
all
16.80 18.60 20.40 24.–



46.40 60.10 74.20
L00
L13
L44
all
all
all
all
all except . and /;
for 0 and 1 on request
all except . and /;
for 0 and 1 on request
all, for 0 and 1
on request
all, for 0 and 1
on request
all except ), *, +, ,;
for 0 and 1 on request
L45
L47
L48
L49
152.–

–
–
–
–
–
–
–
–
1320.– 1320.– 1320.–
24.60 24.60 24.60 24.60 29.70 29.70 29.70 29.70 38.20 38.20 38.20
56.80 56.80 56.80 56.80 68.–
81.50 99.60 118.– O. R. O. R. O. R.
71.30 71.30 71.30 71.30 85.40 103.–
126.–
148.–
O. R.
O. R.
O. R.
91.50 91.50 91.50 91.50 109.–
131.–
162.–
191.–
O. R.
O. R.
O. R.
116.–
116.–
116.–
116.–
139.–
168.–
205.–
243.–
292.–
345.–
411.–
179.–
179.–
179.–
179.–
216.–
255.–
319.–
382.–
446.–
536.–
636.–
For legends, see Page 2/85; for footnotes, see Page 2/86.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/79
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
Special versions
Additional
identification code
-Z
with order
code and
plain text
if required
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
For converterfed
operation only
Motor version
2
10
On
request
20
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
63
71
80
90
100
112
132
160
180
200
1LA9
1LA9 $
225
–
1LA7/1LA5
1LA9
1PP7/1PP5
1LP7/1LP5
1LA9
1LA7 %
1LA9 with increased output (
1PP7 )
1LP7 +
1LA9 -
1LA5 &
1PP5 *
1LP5 ,
–
1LA7/1LA5 1LA7 .
1LA7/1LA5
1L . . . . . - . . . . . -Z
Motor type
1PP . . . . - . . . . . -Z
Motor connection and connection box (continued)
Connection box on NDE
M64
all
all
Terminal strip for main and
M69
all except $, (, -, 0
auxiliary terminals
and 1
Windings and insulation
Temperature class 155 (F),
C11
all except (, +, ,, 0
used acc. to 155 (F),
and 1
with service factor (SF)
Temperature class 155 (F),
C12
all except (, +, ,, 0
used acc. to 155 (F),
and 1
with increased output
Temperature class 155 (F),
C13
all except (, +, ,, 0
used acc. to 155 (F),
and 1
with increased coolant
temperature
C18
all except $, (, +, ,, -,
Temperature class 180 (H)
0 and 1
at rated output and
max. CT 60 °C 6)
C19
all except 0 and 1
Increased air humidity/
temperature with 30 to 60 g
water per m3 of air
Temperature class 155 (F),
C22
all except (, + and ,
used acc. to 130 (B),
coolant temperature 45 °C,
derating approx. 4 % 7)
C23
all except (, + and ,
Temperature class 155 (F),
used acc. to 130 (B),
coolant temperature 50 °C,
derating approx. 8 % 7)
C24
all except (, + and ,
Temperature class 155 (F),
used acc. to 130 (B),
coolant temperature 55 °C,
derating approx. 13 % 7)
C25
all except (, + and ,
Temperature class 155 (F),
used acc. to 130 (B),
coolant temperature 60 °C,
derating approx. 18 %
C26
all except 0 and 1
Increased air humidity/
temperature with 60 to 100 g
water per m3 of air
Temperature class 155 (F),
Y50 •
all except (, +, ,, 0
used acc. to 130 (B) with a
and
and 1
higher coolant temperature
specified
and/or site altitude
output,
CT .. °C or
SA …. m
above
sea level
Y52
all except (, +, ,, 0 and
Temperature class 155 (F),
and
1
used acc. to 155 (F),
specified
other requirements
output,
CT .. °C or
SA …. m
above
sea level
Frame size
63
71
1LA5 /
1LA5 1
1LA7 0
80
90
100
65.10 74.30 83.70 95.90 124.–
87.30 87.30 87.30 87.30 –
112
132
160
180
200
225
152.–
–
196.–
–
266.–
–
298.–
–
320.–
–
335.–
–
42.70 42.70 42.70 42.70 49.70 49.70 66.10 66.10 84.30 84.30 95.80
42.70 42.70 42.70 42.70 49.70 49.70 66.10 66.10 84.30 84.30 95.80
42.70 42.70 42.70 42.70 49.70 49.70 66.10 66.10 84.30 84.30 95.80
155.–
155.–
155.–
155.–
217.–
278.–
352.–
437.–
540.–
696.–
812.–
153.–
153.–
153.–
153.–
153.–
153.–
153.–
232.–
312.–
385.–
465.–
42.70 42.70 42.70 42.70 49.70 49.70 66.10 66.10 84.30 84.30 95.80
42.70 42.70 42.70 42.70 49.70 49.70 66.10 66.10 84.30 84.30 95.80
57.40 67.50 76.50 90.10 111.–
135.–
172.–
214.–
276.–
336.–
497.–
57.40 67.50 76.50 90.10 111.–
135.–
172.–
214.–
276.–
336.–
497.–
279.–
279.–
289.–
289.–
297.–
334.–
361.–
480.–
596.–
623.–
840.–
86.10 101.–
114.–
135.–
166.–
201.–
260.–
319.–
413.–
508.–
747.–
42.70 42.70 42.70 42.70 49.70 49.70 66.10 66.10 84.30 84.30 95.80
For legends, see Page 2/85; for footnotes, see Page 2/86.
2/80
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
Special versions
On
request
Additional
identification code
-Z
with order
code and
plain text
if required
Options – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
For converterfed
operation only
Motor version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
63
71
80
90
100
112
132
160
180
200
1LA9
1LA9 $
225
–
1LA7/1LA5
1LA9
1PP7/1PP5
1LP7/1LP5
1LA9
1LA7 %
1LA9 with increased output (
1PP7 )
1LP7 +
1LA9 -
1LA5 &
1PP5 *
1LP5 ,
2
–
1LA7/1LA5 1LA7 .
1LA7/1LA5
1L . . . . . - . . . . . -Z
Motor type
1PP . . . . - . . . . . -Z
Colors and paint finish
Special finish in RAL 7030
all
all
stone gray
Unpainted
K23
all
all
(only cast-iron parts primed)
Unpainted, only primed
K24
all
all
Special finish sea air resistant M94
all
all
Special finish in special
Y51 • and all
all
RAL colors: For RAL colors, special
see "Special finish in special finish
RAL colors" in Catalog
RAL ….
D 81.1 · 2008 Part 0
"Introduction"
Y54 • and all
all
Special finish in other
special
standard RAL colors:
RAL 1002, 1013, 1015, 1019, finish RAL
….
2003, 2004, 3000, 3007,
5007, 5009, 5010, 5012,
5015, 5017, 5018, 5019,
6011, 6019, 6021, 7000,
7001, 7004, 7011, 7016,
7022, 7031, 7032, 7033,
7035, 9001, 9002, 9005
(see Catalog D 81.1 · 2008
Part 0 "Introduction")
Modular technology – Basic versions 8)
Mounting of separately
G17
all except ), *, + and ,
driven fan
9)
Mounting of brake
G26
all except $, (, ), *, +,
, and Mounting of 1XP8 001-1
H57
all except $, (, ), *, +,
(HTL) rotary pulse encoder
, and Mounting of 1XP8 001-2
H58
all except $, (, ), *, +,
(TTL) rotary pulse encoder
, and Modular technology – Combinations of basic versions 8)
Mounting of separately
H61
all except $, (, ), *, +,
driven fan and 1XP8 001-1
, and rotary pulse encoder
Mounting of brake and
H62
all except $, (, ), *, +,
1XP8 001-1 rotary pulse
, and 9)
encoder
Mounting of brake and
H63
all except $, (, ), *, +,
separately driven fan 9)
, and Mounting of brake,
H64
all except $, (, ), *, +,
separately driven fan and
, and 1XP8 001-1 rotary pulse
encoder 9)
H97
all except $, (, ), *, +,
Mounting of separately
, and driven fan and 1XP8 001-2
rotary pulse encoder
Mounting of brake and
H98
all except $, (, ), *, +,
1XP8 001-2 rotary pulse
, and 9)
encoder
H99
all except $, (, ), *, +,
Mounting of brake,
, and separately driven fan and
1XP8 001-2 rotary pulse
encoder 9)
1LA5 /
1LA5 1
1LA7 0
Frame size
63
71
80
90
100
112
132
160
180
200
225






















21.50 21.50 21.50 28.70 28.70 28.70 45.70 45.70 85.80 85.80 85.80
675.– 675.– 675.– 675.– 711.– 711.– 760.– 760.– 834.– 834.– 834.–
572.– 572.– 685.– 685.– 775.– 775.– 775.– 818.– 818.– 818.– 818.–
63.–
63.–
63.–
63.–
106.–
106.–
139.–
139.–
194.–
243.–
361.–
–
–
–
–
756.–
900.–
1040.– 1200.– 1440.– 2240.– 3080.–
455.–
455.–
455.–
546.–
638.–
775.–
1000.– 1980.– 2280.– 3190.– 3650.–
–
759.–
730.–
730.–
664.–
664.–
664.–
664.–
664.–
664.–
1520.–
–
1100.– 1040.– 1040.– 952.–
952.–
952.–
952.–
952.–
952.–
2080.–
–
–
–
–
1380.– 1550.– 1660.– 1820.– 2070.– 2830.– 4470.–
–
–
–
–
1270.– 1400.– 1630.– 2590.– 2920.– 3830.– 4240.–
–
–
–
–
1330.– 1570.– 1890.– 3070.– 3610.– 5270.– 6760.–
–
–
–
–
1990.– 2170.– 2540.– 3720.– 4270.– 5920.– 7450.–
–
–
–
–
1620.– 1750.– 1870.– 2030.– 2260.– 3000.– 4830.–
–
–
–
–
1560.– 1660.– 1930.– 2870.– 3190.– 4100.– 4490.–
–
–
–
–
2260.– 2450.– 2800.– 3970.– 4530.– 6190.– 7740.–
For legends, see Page 2/85; for footnotes, see Page 2/86.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/81
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
Special versions
Additional
identification code
-Z
with order
code and
plain text
if required
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
For converterfed
operation only
Motor version
2
10
On
request
20
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
63
71
80
90
100
112
132
160
180
200
1LA9
1LA9 $
225
–
1LA7/1LA5
1LA9
1PP7/1PP5
1LP7/1LP5
1LA9
1LA7 %
1LA9 with increased output (
1PP7 )
1LP7 +
1LA9 -
1LA5 &
1PP5 *
1LP5 ,
–
1LA7/1LA5 1LA7 .
1LA7/1LA5
1L . . . . . - . . . . . -Z
Motor type
1PP . . . . - . . . . . -Z
Modular technology – Additional versions
Brake supply voltage
C00
all except $, (, ), *, +,
24 V DC
, and Brake supply voltage
C01
all except $, (, ), *, +,
400 V AC
, and Brake supply voltage
C02
all except $, (, ), *, +,
180 V DC,
,, -, . and /
for operation on
MICROMASTER 411ECOFAST 10)
Mechanical manual brake
K82
all except $, (, ), *, +,
release with lever
, and (no locking)
Special technology 8)
Prepared for mounting of
H15
all except $, (, ), *, +,
MMI 11)
,, -, 0 and 1
Mounting of LL 861 900 220 H70
all except $, (, ), *, +,
rotary pulse encoder
, and Mounting of HOG 9 D 1024 I H72
all except $, (, ), *, +,
rotary pulse encoder
, and Mounting of OG 10 D 1024 I H73
all except $, (, ), *, +,
rotary pulse encoder
, and Prepared for mounting of
H78
all except $, (, ), *, +,
LL 861 900 220
, and Prepared for mounting of
H79
all except $, (, ), *, +,
HOG 9 D 1024 I
, and Prepared for mounting of
H80
all except $, (, ), *, +,
HOG 10 D 1024 I
, and Mechanical design and degrees of protection
Drive-end seal for flangeK17
all
all
mounting motors,
12)
oil-tight to 0.1 bar
With two additional eyebolts K32
all except $, ( and for IM V1/IM V3
Low-noise version for 2-pole K37
all except $, (, ), *, +,
motors with clockwise
,, -, . and /
direction of rotation 10)
only valid for $, ( and Low-noise version for 2-pole K38
all except $, (, ), *, +,
motors with counterclockwise
,, -, . and /
10)
direction ofrotation
only valid for $, ( and IP65 degree of protection 13) K50
all
all
IP56 degree of protection 14) K52
all
all
Vibration-proof version
L03
all
all
Condensation drainage holes L12
all
all
Frame size
63
71
1LA5 /
1LA5 1
1LA7 0
80
90
100
112
132
160
180
200
225
33.40 34.20 34.20 34.20 51.40 51.40 51.40 51.40 68.60 68.60 68.60
33.40 34.20 34.20 34.20 51.40 51.40 51.40 51.40 68.60 68.60 68.60
33.40 34.20 34.20 34.20 51.40 51.40 51.40 –
–
–
–
229.–
229.–
243.–
243.–
256.–
256.–
286.–
414.–
602.–
702.–
702.–
O. R.
473.–
473.–
473.–
497.–
497.–
538.–
–
–
–
–
–
–
–
–
2910.– 2910.– 2910.– 2910.– 2910.– 2910.– 4730.–
–
–
–
–
3300.– 3300.– 3300.– 3300.– 3660.– 3660.– 4810.–
–
–
–
–
4290.– 4290.– 4290.– 4290.– 4370.– 4370.– 5710.–
–
–
–
–
628.–
628.–
628.–
628.–
726.–
726.–
726.–
–
–
–
–
604.–
604.–
604.–
604.–
698.–
698.–
698.–
–
–
–
–
628.–
628.–
628.–
628.–
726.–
726.–
726.–
44.90 47.10 49.70 53.20 59.30 64.80 79.–
115.–
150.–
185.–
245.–
–
–
–
–
–
–
–
–
123.–
123.–
123.–
–
–
–
–
–
–
644.–
644.–
859.–
859.–
1370.–
–
–
–
–
–
–
–
–
–
–
–
–
–
644.–
–
644.–
859.–
859.–
859.–
859.–
–
1370.–
–
155.–
171.–
54.30
58.–
–
155.–
171.–
62.20
58.–
–
155.–
171.–
69.70
69.70
–
155.–
171.–
77.70
69.70
–
155.–
171.–
85.10
85.10
–
155.–
171.–
92.90
85.10
–
155.–
171.–
101.–
101.–
–
232.–
254.–
108.–
101.–
859.–
310.–
339.–
115.–
115.–
859.–
385.–
425.–
124.–
131.–
–
465.–
512.–
131.–
175.–
58.–
58.–
69.70 69.70 85.10 85.10 101.–
101.–
115.–
131.–
175.–
–
–
552.–
670.–
670.–
670.–
670.–
15)
Rust-resistant screws
(externally)
Mechanical protection for
encoder 16)
M27
all
all
M68
all except $, (, ), *, +,
, and -
552.–
579.–
579.–
670.–
For legends, see Page 2/85; for footnotes, see Page 2/86.
2/82
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Special versions
Additional
identification code
-Z
with order
code and
plain text
if required
1L . . . . . - . . . . . -Z
1PP . . . . - . . . . . -Z
Coolant temperature and site altitude
Coolant temperature
D03
-40 to +40 °C 29)
Options – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
For converterfed
operation only
Motor version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
63
71
80
90
100
112
132
160
180
200
1LA9
1LA9 $
–
1LA7/1LA5
1LA9
1PP7/1PP5
1LP7/1LP5
1LA9
1LA7 %
1LA9 with increased output (
1PP7 )
1LP7 +
1LA9 -
1LA5 &
1PP5 *
1LP5 ,
2
–
1LA7/1LA5 1LA7 .
1LA7/1LA5
Motor type Frame size
63
71
all except $, ( and only valid for $, ( and all
all
Coolant temperature
D04
-30 to +40 °C 29)
Designs in accordance with standards and specifications
Ex nA II on VIK rating plate
C27
only possible for $ and CCC China Compulsory
D01
all except $, (, ), *, +,
18)
Certification
, and only valid for $, ( and IE1 motor without CE marking D22
only possible for %, &, (,
for export outside EEA
), *, + and ,
(see EU Directive 640/2009)
Electrical according to
D30
all except ), *, + and ,;
NEMA MG1-12 19)
for - standard version
Design according to UL with D31
all except 0 and 1; for 19)
"Recognition Mark"
standard version
Certified for Korea according D33
only possible for $ and 20)
to KS C4202
China Energy Efficiency Label D34
only possible for $ and Canadian regulations (CSA) D40
all except 0 and 1;
21)
for - standard version
NEMA Energy Efficient,
North America version
according to NEMA MG1,
Table 12-11, incl. UL and CSA
PSE mark for Japan 22)
VIK version (comprises
Zone 2 for mains-fed
operation, without Ex nA II
marking on rating plate) 23)
Bearings and lubrication
Measuring nipple for SPM
shock pulse measurement for
bearing inspection 24)
Bearing design for increased
cantilever forces
Regreasing device 24) 25)
Located bearing DE
Located bearing NDE
225
1LA5 /
1LA5 1
1LA7 0
200
225
238.– 238.– 265.– 332.– 397.– 503.– 583.– 669.– 742.–
–
–
265.– 332.– 397.– 503.– 583.– 669.– –
43.90 43.90 58.40 58.40 72.90 72.90 87.50 87.50 116.–
861.–
–
146.–
1100.–
–
146.–
40.10 40.10 40.10 40.10 40.10 40.10 40.10 40.10 –
41.70 41.70 41.70 41.70 41.70 41.70 –
–
–
–
–
–
–
40.10 40.10 40.10 40.10 –
–
–
–
–
–
–








80

90

100

112
132
160
180
41.70 41.70 41.70 41.70 41.70 41.70 41.70 41.70 71.30 71.30 71.30
74.–
78.80 84.–
93.70 104.–
–
–
42.30 42.30 42.30 42.30 42.30 42.30 42.30 42.30 –









74.–
78.80 84.–
93.70 104.–
124.–
158.–
192.–
261.–
347.–
435.–
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
–


124.–
158.–
192.–
261.–
347.–
435.–
D42
only possible for -
O. R.
D46
K30
all except 0 and 1
only possible for $ and -
40.10 40.10 40.10 40.10 40.10 40.10 40.10 –
136.– 156.– 177.– 199.– 225.– 261.– 333.– 421.–
–
–
–
–
–
–
G50
all
all
–
–
–
–
265.–
296.–
327.–
360.–
388.–
420.–
451.–
K20
all
all
–
–
–
–
104.–
121.–
136.–
181.–
228.–
269.–
302.–
K40
K94
L04
all
all
all
all
all except ) and *
only valid for ) and *
–
39.40
35.40
35.40
–
39.40
37.80
37.80
–
39.40
39.40
39.40
–
41.80
41.80
41.80
327.–
72.10
43.70
43.70
335.–
85.40
46.10
46.10
345.–
105.–
48.80
48.80
374.–
144.–
394.–
303.–
443.–
420.–
492.–
591.–




–
–
–
–
all
all
all
all











684.–
160.–
45.–
760.–
207.–
61.–
Balance and vibration quantity
Vibration quantity level A
Vibration quantity level B
K02
Full-key balancing
L68
Balancing without key
M37
all
all
all
all
O. R.
O. R.
228.– 248.– 263.– 278.– 292.– 337.– 432.– 535.– 610.–
95.20 95.20 95.20 110.– 110.– 110.– 127.– 127.– 160.–
22.50 22.50 22.50 22.50 29.20 29.20 34.50 34.50 45.–
For legends, see Page 2/85; for footnotes, see Page 2/86.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/83
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
Special versions
Additional
identification code
-Z
with order
code and
plain text
if required
Non-standard cylindrical
shaft extension NDE 27)
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
For converterfed
operation only
Motor version
2
1L . . . . . - . . . . . -Z
1PP . . . . - . . . . . -Z
Shaft and rotor
Concentricity of shaft
extension, coaxiality and
linear movement in
accordance with DIN 42955
Tolerance R for flangemounting motors 26)
Second standard shaft
extension
Shaft extension with standard
dimensions, without feather
keyway
Concentricity of shaft
extension in accordance with
DIN 42955 Tolerance R
Standard shaft made of
stainless steel
Non-standard cylindrical
shaft extension DE 27)
Motor category
Motor version
10
On
request
20
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
63
71
80
90
100
112
132
160
180
200
1LA9
1LA9 $
225
–
1LA7/1LA5
1LA9
1PP7/1PP5
1LP7/1LP5
1LA9
1LA7 %
1LA9 with increased output (
1PP7 )
1LP7 +
1LA9 -
1LA5 &
1PP5 *
1LP5 ,
–
1LA7/1LA5 1LA7 .
1LA7/1LA5
1LA5 /
1LA5 1
1LA7 0
Motor type Frame size
63
71
80
90
100
112
132
160
180
200
225
K04
all
all
124.–
185.–
217.–
248.–
278.–
310.–
385.–
465.–
543.–
619.–
K16
all
all
87.30 87.30 101.–
101.–
147.–
147.–
194.–
224.–
339.–
375.–
395.–
K42
all
all
423.–
451.–
483.–
511.–
541.–
569.–
597.–
628.–
729.–
803.–
875.–
L39
all
all
241.–
241.–
241.–
241.–
265.–
265.–
404.–
404.–
209.–
235.–
280.–
M65
all except $, ( and -
–
–
830.–
830.–
953.–
953.–
1100.– 1370.– 2440.– 2830.– 3060.–
all
407.–
434.–
464.–
491.–
520.–
547.–
574.–
604.–
701.–
772.–
841.–
all
407.–
434.–
464.–
491.–
520.–
547.–
574.–
604.–
701.–
772.–
841.–
all except $, (, ), *, +,
, and only valid for $, ( and all except ), *, + and ,
all, for 0 and 1
on request
all, for 0 and 1
on request
–
–
124.–
201.–
326.–
465.–
590.–
697.–
697.–
976.–
976.–
–
155.–
379.–
–
155.–
426.–
–
155.–
426.–
–
155.–
426.–
–
194.–
443.–
465.–
232.–
472.–
590.–
269.–
535.–
–
310.–
594.–
–
348.–
657.–
–
385.–
756.–
–
425.–
908.–
379.–
426.–
426.–
426.–
443.–
472.–
535.–
594.–
657.–
756.–
908.–
all except +, ,, ., /
and 8-pole motors
all
all
only possible for $, ( and
all
all
41.10 41.10 41.10 41.10 41.10 41.10 41.10 41.10 68.60 68.60 68.60
all
all
42.70 42.70 42.70 42.70 42.70 42.70 42.70 42.70 71.30 71.30 71.30
all
all
42.70 42.70 42.70 42.70 42.70 42.70 42.70 42.70 71.30 71.30 71.30
Y58 • and all
identification code
Y59 • and all
identification code
Heating and ventilation
Fan cover for textile industry H17
28)
Metal external fan 29)
K35
Anti-condensation heating
K45
30)
for 230 V
Anti-condensation heating
K46
for 115 V 32)
Rating plate and extra rating plates
Extra rating plate for voltage B07
tolerance 33)
Second rating plate, loose
K31
Rating plate,
M40
stainless steel
Extra rating plate or rating
Y80 • and
plate with deviating rating
identificaplate data
tion code
Y82 • and
Extra rating plate with
identificaidentification codes
tion code
Additional information on rat- Y84 • and
ing plate and on package
identificalabel (max. 20 characters)
tion code
Extension of liability for defects
Extension of the liability for
Q80
defects by 12 months
to a total of 24 months
(2 years) from delivery
Q82
Extension of the liability for
defects by 24 months
to a total of 36 months
(3 years) from delivery
155.–
21.70 21.70 21.70 21.70 21.70 21.70 21.70 21.70 69.70 69.70 69.70
41.80 41.80 41.80 41.80 41.80 41.80 41.80 41.80 –
–
–
55.20 64.90 73.60 86.60 107.–
130.–
165.–
206.–
265.–
323.–
478.–
only possible for ), *, +
and ,
–
–
–
–
–
–
–
–
2.3 % 2.3 % 2.3 %
only possible for ), *, +
and ,
–
–
–
–
–
–
–
–
4.6 % 4.6 % 4.6 %
For legends, see Page 2/85; for footnotes, see Page 2/86.
2/84
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
Special versions
On
request
Additional
identification code
-Z
with order
code and
plain text
if required
Options – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
Motor category
Motor version
IE2 High
Efficiency
IE3 Premium
Efficiency
IE1 Standard
Efficiency
NEMA Energy
Efficient
NEMA Premium
Efficient
Pole-changing
For converterfed
operation only
Motor version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
63
71
80
90
100
112
132
160
180
200
1LA9
1LA9 $
225
–
1LA7/1LA5
1LA9
1PP7/1PP5
1LP7/1LP5
1LA9
1LA7 %
1LA9 with increased output (
1PP7 )
1LP7 +
1LA9 -
1LA5 &
1PP5 *
1LP5 ,
2
–
1LA7/1LA5 1LA7 .
1LA7/1LA5
1L . . . . . - . . . . . -Z
Motor type
1PP . . . . - . . . . . -Z
Packaging, safety notes, documentation and test certificates
Printed German/English
B01
all except ), *, + and ,
Operating Instructions
only valid for ), *, +
(compact) enclosed in each
and ,
wire-lattice pallet 33)
Acceptance test certificate
B02
all
all
3.1 in accordance with
EN 10204 EN 10204 31)
Printed German/English
all
all
Operating Instructions
(compact) enclosed 33)
Printed German/English
B23
all
all
Operating Instructions
enclosed
Document –
B31
all
all
Electrical data sheet
Document –
B32
all
all
Order dimension drawing
Type test with heat run for
F83
all except 0 and 1
horizontal motors,
with acceptance
all
all
Wire-lattice pallet packaging L99
Connected in star for
M32
all
all
dispatch
Connected in delta for
M33
all
all
dispatch
1LA5 /
1LA5 1
1LA7 0
Frame size
63
71
80
90
100
112
132
160
180
200
225









–







–
–
–
–
–
29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50











66.10 66.10 66.10 66.10 66.10 66.10 66.10 66.10 66.10 66.10 66.10
–
–
–
–
312.–
312.–
312.–
312.–
312.–
312.–
312.–
–
–
–
–
312.–
312.–
312.–
312.–
312.–
312.–
312.–
4210.– 4210.– 4910.– 5620.– 6310.– 6730.– 7300.– 7720.– 8820.– 9850.– 10400.–









24.60 24.60 24.60 24.60 29.70 29.70 29.70 29.70 39.–
–
39.–
–
39.–
24.60 24.60 24.60 24.60 29.70 29.70 29.70 29.70 39.–
39.–
39.–
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


For footnotes, see Page 2/86.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/85
© Siemens AG 2015
SIMOTICS GP 1LA/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options – Aluminum series
1LA7, 1LA5, 1LA9, 1LP7, 1LP5, 1PP7, 1PP5
10
20
On
request
2
1)
Evaluation with appropriate tripping unit (see Catalog IC 10) is
recommended. For pole-changing motors with separate windings, the
number of temperature sensors must be doubled (order code A11,
prices of A12 or order code A12, prices available on request).
2)
Not possible for pole-changing motors and for 1LA9 motors with increased
output in frame size 132. Only one sensor (temperature sensor or PTC
thermistor) can be connected. Only possibilities are voltage code 1 with
voltage of 230 VΔ/400 VY and special voltage with voltage code 9 and
order code L1U (400 VΔ). The following order codes cannot be used in
combination with the ECOFAST plugs, order code G55: A12, C02, C18,
D31, D40, G50, H15, H17, H62, H63, H64, H98, H99, K04, K15, K16, K34,
K35, K40, K45, K46, K52, K54, K82, L03, L44, L45, L47, L48, L49, L51,
L52.
3)
Not possible for pole-changing motors. Only one sensor (temperature
sensor or PTC thermistor) can be connected. Only possibilities are voltage
code 1 with voltage of 230 VΔ/400 VY and special voltage with voltage
code 9 and order code L1U (400 VΔ). The following order codes cannot
be used in combination with the ECOFAST plugs, order code G56: A12,
A23, A31, C00, C18, D31, D40, G50, H15, H17, K04, K15, K16, K34, K35,
K40, K45, K46, K52, K54, K82, L03, L44, L45, L47, L48, L49, L51, L52.
The following order codes can be used in combination with the ECOFAST
plugs, order code G56 only with order codes C01 (400 V AC) or C02 (180
V DC): G26, H62, H63, H64, H98, H99.
4)
In combination with the options "PTC thermistor" or "Anti-condensation
heating", please inquire before ordering.
5)
Not possible for pole-changing motors and/or with voltage code 1 or 6.
6)
Cannot be used for motors in UL version (order code D31).
Cannot be used for motors according to CSA approval (order code D40)
for the 1LA5 motor series in frame sizes 180 to 225. The grease lifetime
specified in Catalog
D 81.1 · 2008 in Section 0 "Introduction" refers to CT 40 °C. When the coolant temperature rises by 10 K, the grease service lifetime or relubrication
interval is halved.
7)
No derating in combination with the following order codes: L2A, L2C, L2Q,
L2R, L2S, L2T, L2U, L2V, L3E and L3G.
8)
A second shaft extension is not possible. Please inquire for mounted
brakes. The order codes listed cannot be combined within the various
technologies nor with each other within the same technology system.
This applies for:
– Modular technology
– Basic versions of "Modular technology"
– Combinations of basic versions "Special technology"
9)
The standard brake supply voltage is 230 V AC, 50/60 Hz. Other brake
supply voltages are possible with order codes C00, C01 and C02.
10)
Not possible in motors in a pole-changing version.
11)
Converter mounting is possible, if the MICROMASTER type is specified for
230 VΔ/400 VY (see Catalog DA 51.3).
12)
Not possible for type of construction IM V3.
13)
Not possible in combination with rotary pulse encoder HOG 9 D 1024 l
(order code H72, H79) and/or brake 2LM8 (used for motors up to and
including frame size 225, order code G26).
14)
Not possible in combination with brake 2LM8 (used for motors up to and
including frame size 225, order code G26).
15)
Supplied with the condensation drainage holes sealed at the drive end DE
and non-drive end NDE (IP55, IP56, IP65). If condensation drainage holes
are required in motors of the IM B6, IM B7 or IM B8 type of construction
(feet located on side or top), it is necessary to relocate the bearing plates
at the drive end (DE) and non-drive end (NDE) so that the condensation
drainage holes situated between the feet on delivery are underneath.
16)
Not necessary when a rotary pulse encoder is combined with a separately
driven fan, because in this case the rotary pulse encoder is installed under
the fan cover.
17)
For 1LA5/1LA7 motors with special insulation for converter-fed operation,
in connection with mountings, the respective technical data must be
observed, please inquire before ordering.
2/86
Siemens D 81.1 P · 03/2015
18)
CCC certification is required for:
– 2-pole motors ≤ 2.2 kW
– 4-pole motors ≤ 1.1 kW
– 6-pole motors ≤ 0.75 kW
– 8-pole motors ≤ 0.55 kW
For frame sizes 100 and 112, order code D01 is only applicable to 1LA7
pole-changing motors.
19)
Possible up to 600 V max. The rated voltage is indicated on the rating
plate without voltage range. Order codes D30 and D31 do not authorize
importing into USA and Mexico. The North America export version of the
1LA9 with order code D42 NEMA Energy Efficient is available for this
purpose.
20)
The 2, 4 and 6-pole IE2 motors 1LA9 and 1LG6 in the 0.75 kW to 200 kW
range for 50 Hz output at 60 Hz are certified for Korea.
21)
The rated voltage is indicated on the rating plate without voltage range.
Order code D40 does not authorize importing
into Canada. The North America export version of the 1LA9 with order
code D42 NEMA Energy Efficient is available for this purpose.
22)
"Small power motors" with a rated output of up to 3 kW which are exported
to Japan must bear the correct marking.
23)
Not possible in combination with anti-condensation heating, order codes
K45 and K46. Order code M14 or M15 must be selected instead – for
further details, see Part 4 "SIMOTICS XP 1MA/1LA/1LG
Explosion-Proof Motors".
24)
Not possible when brake is mounted.
25)
Not possible for 1LA9 134-6KA..
26)
Can be combined with deep-groove bearings of series 60.., 62.. and 63…
Not possible in combination with parallel roller bearings (e.g. bearings for
increased cantilever forces, order code K20), brake mounting or encoder
mounting.
27)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Not valid for: Conical shafts, non-standard threaded journals, non-standard shaft tolerances, friction welded
journals, extremely "thin" shafts, special geometry dimensions (e.g. square
journals), hollow shafts. Valid for non-standard shaft extensions DE or
NDE. The feather keys are supplied in every case. For order codes Y58,
Y59 and K16, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension
For an explanation of the order codes, see Catalog D 81.1 · 2008 Part 0
"Introduction".
28)
The special requirements of the textile industry regarding the sheet metal
cover open up the possibility that a finger may be inserted between the
cover and enclosure. The customer must implement appropriate
measures to ensure that the installed system is "finger-safe".
29)
For 1LA5/6/7/9 motors and 1LG with metal external fan, converter-fed
operation is permitted. The metal external fan is not possible in
combination with the low-noiseversion – Order code F37 or F38.
30)
Not possible in combination with VIK order code K30. Order code M14 or
M15 must be selected instead – for further details, see Part 4 "
SIMOTICS XP 1MA/1LA/1LG Explosion-Proof Motors".
31)
Can be ordered for 230 VΔ/400 VY or 400 VΔ/690 VY (voltage code 1 or 6).
Not possible for pole-changing motors, naturally cooled motors, 8-pole
motors and in combination with order code D34.
32)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
33)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Options
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
■ Selection and ordering data
Special versions
Additional Motor category
identifica- Motor
Motor
tion code version
type
-Z
(castwith order
iron)
code and
plain text if
required
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
1L . . . . . - . . . . . -Z
1PP4 . . . - . . . . . -Z
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converterfed
operation
only
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
1LG6 $
1LG6 %
1LG6
1LA6 &
2
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6 ,
1LG6
1LG4
1LG4 -
1LG6
1LG6 .
Motor
type
315 L
1LG6
318-.M,
1LG6
312-.M
*)
1LG6
1LA6/
1LG4
1PP4
1LP4
1LG6
315
S/M/L
Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
315 L
1LG6
318-.M,
1LG6
312-.M
*)
Motor protection
Motor protection with PTC
A11
thermistors with 3 embedded
temperature sensors for
tripping 1)
Motor protection with PTC
A12
thermistors with 6 embedded
temperature sensors for alarm
and tripping 1)
Motor temperature detection
A23
with embedded temperature
sensor KTY 84-130 1)
Motor temperature detection
A25
with embedded temperature
sensors 2 x KTY 84-130 1)
A31
Temperature detectors for
tripping 1)
A60
Installation of 3 Pt100
resistance thermometers 1)
Installation of 6 Pt100
A61
resistance thermometers in
stator winding 1)
Installation of 2 Pt100 screw-in A72
resistance thermometers in
basic circuit for rolling-contact
bearings 1)2)3)
Installation of 2 Pt100 screw-in A78
resistance thermometers in
3-wire circuit for rolling-contact
bearings 1) 3)
Installation of 2 Pt100 double
A80
screw-in resistance thermometers in 3-wire circuit for rollingcontact bearings 1) 3)
Motor connection and connection box
K06
Two-part plate on connection
box
K09
Connection box on RHS
Connection box on LHS
K10
Connection box on top, feet
K11
screwed on
K15
Connection box in cast-iron
version
all
all
119.–
119.–
178.–
178.–
236.–
236.–
322.–
322.–
401.–
401.–
401.–
all
all
203.–
203.–
271.–
271.–
417.–
417.–
542.–
542.–
673.–
673.–
673.–
all
all
119.–
119.–
178.–
178.–
335.–
335.–
459.–
595.–
595.–
877.–
877.–
all
all
238.–
238.–
356.–
356.–
544.–
544.–
748.–
1010.–
1010.–
1490.–
1490.–
all
all
137.–
137.–
201.–
201.–
278.–
278.–
376.–
376.–
466.–
466.–
466.–
all except .
1500.– 1500.– 1500.– 1500.– 1500.–
1500.–
1500.–
1650.–
1650.–
1650.–
1650.–
all except .
–
–
–
–
2440.–
2440.–
2440.–
2440.–
2440.–
2440.–
2440.–
all
all
–
–
–
–
4430.–
4430.–
4430.–
4430.–
4430.–
4430.–
4430.–
all
all
–
–
–
–
4870.–
4870.–
4870.–
4870.–
4870.–
4870.–
4870.–
all
all
–
–
–
–
5840.–
5840.–
5840.–
5840.–
5840.–
5840.–
5840.–
all
all
–
–
–
–
–
550.–
550.–
1040.–
1040.–
1320.–
1320.–
all
all
all
all
all
all
126.–
126.–
–
135.–
135.–
–
147.–
147.–
–
215.–
215.–
–
382.–
382.–
382.–
450.–
450.–
450.–
532.–
532.–
532.–
790.–
790.–
790.–
888.–
888.–
888.–
1020.–
1020.–
1020.–
1020.–
1020.–
1020.–




406.–
538.–
790.–




all except )
and *
For legends and footnotes, see Page 2/96.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/87
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Special versions
Additional Motor category
identifica- Motor
Motor
tion code version
type
-Z
(castwith order
iron)
code and
plain text if
required
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
2
1L . . . . . - . . . . . -Z
1PP4 . . . - . . . . . -Z
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converterfed
operation
only
Motor
version
10
20
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
*)
1LG6 %
1LG6
1LA6 &
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6 ,
1LG6
1LG4
1LG4 -
1LG6
1LG6 .
Motor
type
315 L
1LG6
318-.M,
1LG6
312-.M
1LG6 $
1LG6
1LA6/
1LG4
1PP4
1LP4
1LG6
On
request
Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
315 L
1LG6
318-.M,
1LG6
312-.M
*)
Motor connection and connection box (continued)
One metal cable gland
K54
all
all
Cable gland,
K55
all
all
max. configuration
all
all
Rotation of the connection box K83
through 90°, entry from DE
all
all
Rotation of the connection box K84
through 90°, entry from NDE
all
all
Rotation of the connection box K85
through 180°
L00
all
all
Next larger connection box
L01
all except ), *
Undrilled entry plate
and .
External grounding
L13
all except .
6 cables protruding,
L48
all
all
4)
1.5 m long
L49
all
all
6 cables protruding,
3 m long 4)
L51
all
all
Protruding cable ends –
right side 5) 6)
L52
all
all
Protruding cable ends –
left side 5) 6)
L97
all
all
Auxiliary connection box
1XB3 020
M46
all
all
Stud terminal for cable
connection, accessories pack
(3 items)
Saddle terminal for connection M47
all
all
without cable lug, accessories
pack (6 items)
Windings and insulation
C11
all except .
Temperature class 155 (F),
used acc. to 155 (F),
with service factor (SF)
C12
all except .
Temperature class 155 (F),
used acc. to 155 (F),
with increased output
Temperature class 155 (F),
C13
all except .
used acc. to 155 (F), with
increased coolant temperature
Temperature class 180 (H)
C18
only possible for
at rated output and
&, (, ) and 7) 8) 9)
max. CT 60 °C
115.–
163.–
115.–
163.–
115.–
163.–
147.–
215.–
147.–
215.–
170.–
248.–
170.–
248.–
242.–
430.–
242.–
430.–
242.–
430.–
242.–
430.–
24.–
24.–
24.–
24.–
46.40
60.10
74.20
89.10
106.–
128.–
128.–
24.–
24.–
24.–
24.–
46.40
60.10
74.20
89.10
106.–
128.–
128.–
24.–
24.–
24.–
24.–
46.40
60.10
74.20
89.10
106.–
128.–
128.–
–
–
–
–
–
–
–
–
1320.–
1320.–
1710.–
1960.–
1960.–
2310.–
2310.–







29.70 29.70 29.70 29.70 
–
–
–
–
1060.–






1460.–
1990.–
O. R.
O. R.
O. R.
O. R.
–
–
–
–
1630.–
2250.–
3060.–
O. R.
O. R.
O. R.
O. R.
–
–
–
–
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
–
–
–
–
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
–
–
–
–
228.–
228.–
552.–
552.–
552.–
552.–
552.–
–
–
–
–
–
–
–
155.–
155.–
194.–
194.–
–
–
–
–
–
–
–
543.–
543.–
641.–
641.–
49.70 49.70 66.10 66.10 84.30
84.30
95.80
95.80
112.–
112.–
112.–
49.70 49.70 66.10 66.10 84.30
84.30
95.80
95.80
112.–
112.–
112.–
49.70 49.70 66.10 66.10 84.30
84.30
95.80
95.80
112.–
112.–
112.–
217.–
696.–
812.–
928.–
1090.–
1500.–
–
278.–
352.–
437.–
540.–
For legends and footnotes, see Page 2/96.
2/88
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Special versions
Options
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Additional Motor category
identifica- Motor
Motor
tion code version
type
-Z
(castwith order
iron)
code and
plain text if
required
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
1L . . . . . - . . . . . -Z
1PP4 . . . - . . . . . -Z
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converterfed
operation
only
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
*)
1LG6 %
1LG6
1LA6 &
2
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6 ,
1LG6
1LG4
1LG4 -
1LG6
1LG6 .
Motor
type
315 L
1LG6
318-.M,
1LG6
312-.M
1LG6 $
1LG6
1LA6/
1LG4
1PP4
1LP4
1LG6
315
S/M/L
Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
315 L
1LG6
318-.M,
1LG6
312-.M
*)
Windings and insulation (continued)
Increased air humidity/
C19
temperature with 30 to 60 g
water per m3 of air
Temperature class 155 (F),
C22
used acc. to 130 (B),
coolant temperature 45 °C,
derating ca. 4 %
Temperature class 155 (F),
C23
used acc. to 130 (B),
coolant temperature 50 °C,
derating ca. 8 %
Temperature class 155 (F),
C24
used acc. to 130 (B),
coolant temperature 55 °C,
derating ca. 13 %
Temperature class 155 (F),
C25
used acc. to 130 (B),
coolant temperature 60 °C,
derating ca. 18 %
Increased air humidity/
C26
temperature with 60 to 100 g
water per m3 of air
Temperature class 155 (F),
Y50 • and
used acc. to 130 (B), with
specified
higher coolant temperature
output,
and/or site altitude
CT .. °C or
SA …. m
above
sea level
Y52 and
Temperature class 155 (F),
specified
used acc. to 155 (F), other
output,
requirements 34)
CT .. °C or
SA …. m
above
sea level
Colors and paint finish
Standard finish in
RAL 7030 stone gray
Unpainted
K23
(only cast-iron parts primed)
Unpainted, only primed
K24
Special finish in
K26
RAL 7030 stone gray 10)
all except .
153.–
all except *
153.–
153.–
232.–
1020.–
1300.–
1580.–
1930.–
2360.–
2890.–
2890.–
49.70 49.70 66.10 66.10 84.30
84.30
95.80
95.80
112.–
112.–
112.–
all except *
49.70 49.70 66.10 66.10 84.30
84.30
95.80
95.80
112.–
112.–
112.–
all except *
111.–
135.–
172.–
214.–
276.–
336.–
497.–
627.–
803.–
1040.–
1040.–
all except *
111.–
135.–
172.–
214.–
276.–
336.–
497.–
627.–
803.–
1040.–
1040.–
all except .
297.–
334.–
361.–
480.–
4650.–
5080.–
5900.–
7780.–
8950.–
12800.– 12800.–
all except .
166.–
201.–
260.–
319.–
413.–
508.–
747.–
939.–
1200.–
1560.–
1560.–
all except .
49.70 49.70 66.10 66.10 84.30
84.30
95.80
95.80
112.–
112.–
112.–
all
all
–
–
–
–







all
all











all
all
all
all
28.70 28.70 45.70 45.70 85.80




194.–
85.80
243.–
85.80
361.–
85.80
437.–
85.80
538.–
85.80
691.–
85.80
691.–
For legends and footnotes, see Page 2/96.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/89
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Special versions
Additional Motor category
identifica- Motor
Motor
tion code version
type
-Z
(castwith order
iron)
code and
plain text if
required
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
2
1L . . . . . - . . . . . -Z
1PP4 . . . - . . . . . -Z
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converterfed
operation
only
Motor
version
10
20
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
*)
1LG6 %
1LG6
1LA6 &
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6 ,
1LG6
1LG4
1LG4 -
1LG6
1LG6 .
Motor
type
315 L
1LG6
318-.M,
1LG6
312-.M
1LG6 $
1LG6
1LA6/
1LG4
1PP4
1LP4
1LG6
On
request
Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
315 L
1LG6
318-.M,
1LG6
312-.M
*)
Colors and paint finish (continued)
Special paint for use offshore
M91
Special finish sea air resistant M94
Special finish in other standard Y54 • and
special
RAL colors: RAL 1002, 1013,
1015, 1019, 2003, 2004, 3000, finish
3007, 5007, 5009, 5010, 5012, RAL ….
5015, 5017, 5018, 5019, 6011,
6019, 6021, 7000, 7001, 7004,
7011, 7016, 7022, 7031, 7032,
7033, 7035, 9001, 9002, 9005
(see Catalog D 81.1 · 2008
Part 0 "Introduction")
Y51 • and
Special finish in special
RAL colors: For RAL colors, see special
finish
"Special finish in special RAL
colors" in Catalog D 81.1 · 2008 RAL ….
Part 0 "Introduction"
Standard finish in other
Y53 • and
standard RAL colors:
standard
RAL 1002, 1013, 1015, 1019,
finish RAL
2003, 2004, 3000, 3007, 5007, ….
5009, 5010, 5012, 5015, 5017,
5018, 5019, 6011, 6019, 6021,
7000, 7001, 7004, 7011, 7016,
7022, 7031, 7032, 7033, 7035,
9001, 9002, 9005 (see Catalog
D 81.1 · 2008 Part 0
"Introduction")
Modular technology – Basic versions 7)
Mounting of separately driven G17
fan 12)
G26
Mounting of brake 12) 13)
all
all
all
all
all
all
O. R.
711.–
106.–
O. R.
711.–
106.–
O. R.
760.–
139.–
O. R.
760.–
139.–
2710.–
834.–
194.–
2860.–
834.–
243.–
3300.–
834.–
361.–
4300.–
920.–
437.–
5380.–
920.–
538.–
8310.–
920.–
691.–
8310.–
920.–
691.–
all
all
775.–
775.–
775.–
775.–
818.–
818.–
818.–
882.–
882.–
882.–
882.–
all
all
–
–
–
–
85.80
85.80
85.80
97.70
131.–
210.–
210.–
756.–
900.–
1040.– 1200.– 1440.–
2240.–
3080.–
3790.–
4490.–
5030.–
–
–
–
–
–
4380.–
6120.–
7780.–
24900.– 30700.– 36800.– –
664.–
664.–
664.–
664.–
664.–
664.–
1520.–
1520.–
1520.–
1520.–
1520.–
952.–
952.–
952.–
952.–
952.–
952.–
2080.–
2080.–
2080.–
2080.–
2080.–
1380.– 1550.– 1660.– 1820.– 2070.–
2830.–
4470.–
5170.–
5840.–
6350.–
–
–
–
–
–
5030.–
6770.–
10200.– 26500.– 32200.– 38200.– –
–
–
–
–
5720.–
8220.–
11700.– 29100.– 33600.– 39700.– –
all except )
and *
all except )
and *
all except )
Mounting of 1XP8 001-1 (HTL) H57
and *
rotary pulse encoder
all except )
Mounting of 1XP8 001-2 (TTL) H58
and *
rotary pulse encoder
Modular technology – Combinations of basic versions 7)
Mounting of separately driven H61
all except )
fan and 1XP8 001-1 rotary
and *
pulse encoder
H62
all except )
Mounting of brake and
and *
1XP8 001-1 rotary pulse
13)
encoder
Mounting of brake and
H63
all except )
separately driven fan 12) 13)
and *
For legends and footnotes, see Page 2/96.
2/90
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Special versions
Options
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Additional Motor category
identifica- Motor
Motor
tion code version
type
-Z
(castwith order
iron)
code and
plain text if
required
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
1L . . . . . - . . . . . -Z
1PP4 . . . - . . . . . -Z
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converterfed
operation
only
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
*)
1LG6 %
1LG6
1LA6 &
2
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6 ,
1LG6
1LG4
1LG4 -
1LG6
1LG6 .
Motor
type
315 L
1LG6
318-.M,
1LG6
312-.M
1LG6 $
1LG6
1LA6/
1LG4
1PP4
1LP4
1LG6
315
S/M/L
Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
315 L
1LG6
318-.M,
1LG6
312-.M
*)
Modular technology – Combinations of basic versions 7) (continued)
Mounting of brake, separately H64
all except )
–
driven fan and 1XP8 001-1
and *
rotary pulse encoder 13)
Mounting of separately driven H97
all except )
1620.–
fan and 1XP8 001-2 rotary
and *
pulse encoder
H98
all except )
–
Mounting of brake and
and *
1XP8 001-2 rotary pulse
encoder 13)
Mounting of brake, separately H99
all except )
–
driven fan and 1XP8 001-2
and *
rotary pulse encoder 13)
Modular technology – Additional versions
Brake supply voltage 24 V DC C00
all except )
–
and *
all except )
–
Brake supply voltage 400 V AC C01
and *
K82
all except )
–
Mechanical manual brake
and *
release with lever (no locking)
7)
Special technology
Mounting of LL 861 900 220
H70
all except )
2910.–
rotary pulse encoder
and *
H72
all except )
3300.–
Mounting of HOG 9 D 1024 I
and *
rotary pulse encoder
all except )
4290.–
Mounting of HOG 10 D 1024 I H73
and *
rotary pulse encoder
H78
all except )
628.–
Prepared for mounting of
and *
LL 861 900 220
H79
all except )
604.–
Prepared for mounting of
and *
HOG 9 D 1024 I
H80
all except )
628.–
Prepared for mounting of
and *
HOG 10 D 1024 I
all except ), *,
5310.–
Mounting of HOG 10 DN 1024 I J15
- and .
rotary pulse encoder, terminal
box protection against humidity
Mounting of HOG 10 DN 1024 I J16
all except ), *,
5310.–
rotary pulse encoder, terminal
- and .
box protection against dust
Mounting of HOG 10 DN 1024 I Y74 •
all except ), *,
–
rotary pulse encoder +
and
- and .
centrifugal switch,
specified
(speed .... rpm), terminal box
speed
protection against humidity
.... rpm
–
–
6370.–
8830.–
13200.– 30300.– 35000.– 41100.– –
1750.– 1870.– 2030.– 2260.–
3000.–
4830.–
–
–
–
5300.–
7030.–
10700.– 27000.– 33000.– 38700.– –
–
–
–
6620.–
9120.–
13600.– 30900.– 35500.– 41800.– –
–
–
–
68.60
68.60
68.60
68.60
68.60
68.60
–
–
–
–
68.60
68.60
68.60
68.60
68.60
68.60
–
–
–
–
602.–
702.–
892.–
1020.–
1120.–
1430.–
–
2910.– 2910.– 2910.– 2910.–
2910.–
4730.–
4730.–
4730.–
4730.–
4730.–
3300.– 3300.– 3300.– 3660.–
3660.–
4810.–
4810.–
4810.–
4810.–
4810.–
4290.– 4290.– 4290.– 4370.–
4370.–
5710.–
5710.–
5710.–
5710.–
5710.–
628.–
628.–
628.–
726.–
726.–
726.–
726.–
726.–
726.–
726.–
604.–
604.–
604.–
698.–
698.–
698.–
698.–
698.–
698.–
698.–
628.–
628.–
628.–
726.–
726.–
726.–
726.–
726.–
726.–
726.–
5360.– 5390.– 5420.– 5460.–
5490.–
5520.–
5560.–
5610.–
5650.–
5650.–
5360.– 5390.– 5420.– 5460.–
5490.–
5520.–
5560.–
5610.–
5650.–
5650.–
–
8410.–
8450.–
8480.–
8530.–
8580.–
8580.–
–
–
–
8390.–
5500.–
6130.–
6630.–
–
For legends and footnotes, see Page 2/96.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/91
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Special versions
Additional Motor category
identifica- Motor
Motor
tion code version
type
-Z
(castwith order
iron)
code and
plain text if
required
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
2
1L . . . . . - . . . . . -Z
1PP4 . . . - . . . . . -Z
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converterfed
operation
only
Motor
version
10
20
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
*)
1LG6 %
1LG6
1LA6 &
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6 ,
1LG6
1LG4
1LG4 -
1LG6
1LG6 .
Motor
type
315 L
1LG6
318-.M,
1LG6
312-.M
1LG6 $
1LG6
1LA6/
1LG4
1PP4
1LP4
1LG6
On
request
Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
315 L
1LG6
318-.M,
1LG6
312-.M
*)
Special technology 7) (continued)
Mounting of HOG 10 DN 1024 I Y76 •
all except ), *,
rotary pulse encoder +
and
- and .
centrifugal switch,
specified
(speed .... rpm), terminal box
speed
protection against dust
.... rpm
Mounting of HOG 10 DN 1024 I Y79 •
all except ), *,
rotary pulse encoder + ESL 93, and
- and .
(speed .... rpm), terminal box
specified
protection against dust
speed
(max. 3)
.... rpm
Mechanical design and degrees of protection
Drive-end seal for flangeK17
all
all
mounting motors, oil-tight to
0.1 bar (not possible for IM V3
type of construction) 14)
Low-noise version for 2-pole
K37
only possible
motors with clockwise direction
for & and (
of rotation 15)
Low-noise version for 2-pole
K38
only possible
motors with counter-clockwise
for & and (
direction of rotation 15)
IP65 degree of protection 16)
K50
all
all
IP56 degree of protection 17)
K52
all
all
Vibration-proof version
L03
all
all
all except )
Condensation drainage holes L12
–
–
–
–
8390.–
8410.–
8450.–
8480.–
8530.–
8580.–
8580.–
–
–
–
–
14300.– 14400.– 14600.– 14800.– 14900.– 15000.– 15000.–
59.30 64.80 79.–
115.–
150.–
185.–
245.–
327.–
410.–
492.–
492.–
–
–
644.–
644.–
859.–
859.–
1370.–
1580.–
1880.–
2460.–
–
–
–
644.–
644.–
859.–
859.–
1370.–
1580.–
1880.–
2460.–
–
155.–
171.–
187.–
85.10
155.–
171.–
207.–
92.90
155.–
171.–
225.–
101.–
232.–
254.–
243.–
108.–
310.–
339.–
–
385.–
425.–
–
465.–
512.–
–
543.–
596.–
–
619.–
682.–
–
697.–
764.–
–
697.–
764.–
–







85.10 85.10 101.–
101.–
115.–
131.–
175.–
209.–
217.–
289.–
289.–
–
–
–
–
–
–
–
–
O. R.
O. R.
O. R.
579.–
579.–
670.–
670.–
210.–
210.–
210.–
210.–
210.–
210.–
210.–
18)
Rust-resistant screws
M27
(externally)
M44
Grounding brush for
converter-fed operation
M68
Mechanical protection for
encoder 15)
Coolant temperature and site altitude
Coolant temperature
D02
-50 to +40 °C 20) 21)
D03
Coolant temperature
-40 to +40 °C 20)
D04
Coolant temperature
-30 to +40 °C 35)
all
all
all except )
and *
all except )
and *
all
all
–
–
–
–
2570.–
2750.–
3960.–
4410.–
5350.–
6330.–
6330.–
all
all
397.–
503.–
583.–
669.–
742.–
861.–
1100.–
1360.–
1940.–
2510.–
2510.–
all
all
72.90 72.90 87.50 87.50 116.–
146.–
146.–
1360.–
1940.–
2510.–
2510.–
For legends and footnotes, see Page 2/96.
2/92
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Special versions
Options
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Additional Motor category
identifica- Motor
Motor
tion code version
type
-Z
(castwith order
iron)
code and
plain text if
required
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
1L . . . . . - . . . . . -Z
1PP4 . . . - . . . . . -Z
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converterfed
operation
only
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
*)
1LG6 %
1LG6
1LA6 &
2
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6 ,
1LG6
1LG4
1LG4 -
1LG6
1LG6 .
Motor
type
315 L
1LG6
318-.M,
1LG6
312-.M
1LG6 $
1LG6
1LA6/
1LG4
1PP4
1LP4
1LG6
315
S/M/L
Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
315 L
1LG6
318-.M,
1LG6
312-.M
*)
Designs in accordance with standards and specifications
Ex nA II on VIK rating plate
C27
only possible
for $, % and +
only possible for
IE1 motor without CE marking D22
&, (, ) and *
for export outside EEA
(see EU Directive 640/2009)
Electrical according to
D30
all except ), *
NEMA MG1-12
and .; for + and
, standard
version
Design according to UL with
D31
all except .;
"Recognition Mark" 9) 22)
for + and ,
standard version
Certified for Korea according to D33
only possible for
KS C4202 9) 23)
$, %, + and ,
9)
China Energy Efficiency Label
D34
only possible for
$, %, + and ,
D40
all except .;
Canadian regulations (CSA)
9) 24)
for + and ,
standard version
D41
only possible for ,
NEMA Premium Efficient,
North America version
according to NEMA MG1,
Table 12-12, incl. UL and CSA
NEMA Energy Efficient, North D42
only possible for +
America version according
according to NEMA MG1,
Table 12-11, incl. UL and CSA
PSE mark for Japan 25)
D46
only possible for &
VIK version (comprises Zone 2 K30
only possible for
for mains-fed operation, without
$, %, + and ,
Ex nA II marking on rating plate)
Bearings and lubrication
Measuring nipple for SPM
G50
all
all
shock pulse measurement for
bearing inspection
Bearing design for increased
K20
all
all
cantilever forces 26)
K36
all
all
Special bearing for DE and
NDE, bearing size 63 27)
K40
all
all
Regreasing device
Located bearing DE
K94
all
all
L04
all
all
Located bearing NDE
Insulated bearing cartridge 28) L27
all
all
–
–
–
–
71.30
71.30
71.30
89.10
89.10
107.–
–











41.70 41.70 41.70 41.70 71.30
71.30
71.30
89.10
89.10
107.–
107.–
104.–
124.–
158.–
192.–
308.–
423.–
532.–
628.–
778.–
1020.–
–
–
–
–
–
42.30
42.30
42.30
42.30
42.30
42.30
–
–
–
–
–






–
104.–
124.–
158.–
192.–
261.–
347.–
435.–
522.–
696.–
862.–
–
–
–
–
–
–
–
–
–
–
–
+13%
–
–
–
–
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
920.–
40.10 40.10 40.10 –
–
–
–
–
–
601.–
–
755.–
–
910.–
–
1160.–
–
1580.–
–
2100.–
–
2100.–
265.–
296.–
327.–
360.–
388.–
420.–
451.–
483.–
513.–
544.–
544.–
104.–
121.–
136.–
181.–
287.–
332.–
374.–
433.–
485.–
541.–
541.–
–
–
–
–
464.–
571.–
811.–
1120.–
2010.–
2010.–
2010.–
327.–
75.–
45.40
–
335.–
88.80
47.90
–
345.–
109.–
50.80
–
374.–
150.–
394.–
315.–
443.–
437.–
492.–
615.–
591.–
790.–



1020.–
1050.–
1050.–








–
–
–
1750.–
1870.–
1930.–
2030.–
2030.–
For legends and footnotes, see Page 2/96.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/93
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Special versions
Additional Motor category
identifica- Motor
Motor
tion code version
type
-Z
(castwith order
iron)
code and
plain text if
required
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
2
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converterfed
operation
only
Motor
version
1L . . . . . - . . . . . -Z
1PP4 . . . - . . . . . -Z
10
20
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
*)
1LG6 %
1LG6
1LA6 &
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6 ,
1LG6
1LG4
1LG4 -
1LG6
1LG6 .
Motor
type
315 L
1LG6
318-.M,
1LG6
312-.M
1LG6 $
1LG6
1LA6/
1LG4
1PP4
1LP4
1LG6
On
request
Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
315 L
1LG6
318-.M,
1LG6
312-.M
*)
Balance and vibration quantity
Vibration quantity level A
Vibration quantity level B
K02
L68
Full-key balancing
Balancing without key
M37
Shaft and rotor
Concentricity of shaft extension, K04
coaxiality and linear movement
in accordance with DIN 42955
Tolerance R for flange-mounting
motors 29)
Second standard shaft
K16
extension 30)
Shaft extension with standard K42
dimensions, without feather
keyway
Concentricity of shaft extension L39
in accordance with DIN 42955
Tolerance R
Standard shaft made of
M65
stainless steel
Non-standard cylindrical shaft Y58 • and
identificaextension DE 31)
tion code
Non-standard cylindrical shaft Y59 • and
extension NDE 31)
identification code
Heating and ventilation
Fan cover for textile industry 32) H17
Metal external fan 33)
K35
Anti-condensation heating for
230 V
Anti-condensation heating for
115 V
Sheet metal fan cover
all
all
all
all
all
all
all
all







292.– 337.– 432.– 535.– 610.–
110.– 110.– 127.– 127.– 160.–
29.20 29.20 34.50 34.50 45.–
684.–
160.–
45.–
926.–
207.–
61.–
1180.–
207.–
61.–
1370.–
207.–
74.20
1770.–
207.–
86.10
1770.–
207.–
86.10
all
all
248.–
278.–
310.–
385.–
465.–
543.–
619.–
697.–
776.–
851.–
851.–
all
all
147.–
147.–
194.–
224.–
339.–
375.–
395.–
412.–
487.–
535.–
535.–
all
all
541.–
569.–
597.–
628.–
729.–
803.–
875.–
948.–
1020.–
1090.–
1090.–
all
all
265.–
265.–
404.–
404.–
209.–
235.–
280.–
366.–
366.–
560.–
560.–
all
all
953.–
953.–
1100.– 1370.– –
–
–
–
–
–
–
all
all
520.–
547.–
574.–
604.–
701.–
772.–
841.–
912.–
982.–
1050.–
1050.–
all
all
520.–
547.–
574.–
604.–
701.–
772.–
841.–
912.–
982.–
1050.–
1050.–
326.–
194.–
465.–
232.–
590.–
269.–
697.–
310.–
–
348.–
–
385.–
–
425.–
–
465.–
–
503.–
–
543.–
–
543.–
K45
all
all
all except )
and *
all
all
443.–
472.–
535.–
594.–
657.–
756.–
908.–
937.–
937.–
976.–
976.–
K46
all
443.–
472.–
535.–
594.–
657.–
756.–
908.–
937.–
937.–
976.–
976.–
–
–
–
–
87.50
107.–
120.–
172.–
220.–
242.–
242.–
–
–
–
–
–
–
2360.–
2360.–
2360.–
2530.–
–
41.10 41.10 41.10 41.10 68.60
68.60
68.60
85.70
85.70
108.–
108.–
21.70 21.70 21.70 21.70 69.70
69.70
69.70
69.70
69.70
69.70
69.70
all
all except )
and *
Y81 • and all except )
Separately driven fan with
identifica- and *
non-standard voltage and/or
tion code
frequency
Rating plate and extra rating plates
Extra rating plate for voltage
B07
all except *, tolerance 34)
and 8-pole motors
K31
all
all
Second rating plate, loose
L36




For legends and footnotes, see Page 2/96.
2/94
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Special versions
Options
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Additional Motor category
identifica- Motor
Motor
tion code version
type
-Z
(castwith order
iron)
code and
plain text if
required
IE2 High
Efficiency
IE3
Premium
Efficiency
IE1
Standard
Efficiency
NEMA
Energy
Efficient
NEMA
Premium
Efficient
Polechanging
For converterfed
operation
only
Motor
version
1L . . . . . - . . . . . -Z
1PP4 . . . - . . . . . -Z
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
*)
1LG6 %
1LG6
1LA6 &
2
1LG4 (
1PP4 )
1LP4 *
1LG6 +
1LG6 ,
1LG6
1LG4
1LG4 -
1LG6
1LG6 .
Motor
type
315 L
1LG6
318-.M,
1LG6
312-.M
1LG6 $
1LG6
1LA6/
1LG4
1PP4
1LP4
1LG6
315
S/M/L
Frame size
100
112
132
160
180
200
225
250
280
315
S/M/L
315 L
1LG6
318-.M,
1LG6
312-.M
*)
Rating plate and extra rating plates (continued)
Rating plate, stainless steel
M40
all
all
–
Extra rating plate or rating plate Y80 • and all
all
107.–
with deviating rating plate data identification code
Extra rating plate with
Y82 • and all
all
42.70
identification codes
identification code
Additional information on rating Y84 • and all
all
42.70
plate and on package label
identifica(max. 20 characters)
tion code
Extension of liability for defects
Q80
all except &
–
Extension of the liability for
and +
defects by 12 months to a total
of 24 months (2 years) from
delivery
Extension of the liability for
Q82
all except &
–
defects by 24 months to a total
and +
of 36 months (3 years) from
delivery
Packaging, safety notes, documentation and test certificates
all
all

Printed German/English
Operating Instructions
36)
(compact) enclosed
Printed German/English
B01
all
all

Operating Instructions
(compact) enclosed in each
wire-lattice pallet 36)
Acceptance test certificate 3.1 B02
all
all
29.50
in accordance with EN 10204
–
130.–
–
165.–
–
206.–
51.10
265.–
51.10
323.–
68.60
478.–
68.60
603.–
68.60
772.–
68.60
1000.–
68.60
1000.–
42.70 42.70 42.70 71.30
71.30
71.30
89.10
89.10
112.–
112.–
42.70 42.70 42.70 71.30
71.30
71.30
89.10
89.10
112.–
112.–
–
–
–
2.3 %
2.3 %
2.3 %
2.3 %
2.3 %
2.3 %
2.3 %
–
–
–
4.6 %
4.6 %
4.6 %
4.6 %
4.6 %
4.6 %
4.6 %













–
–
–
–
–
–
–
29.50 29.50 29.50 29.50
29.50
29.50
29.50
29.50
29.50
29.50
35)
Printed German/English
Operating Instructions enclosed
Document –
Electrical data sheet
Document –
Order dimension drawing
Type test with heat run for
horizontal motors,
with acceptance
Wire-lattice pallet packaging
Connected in star for dispatch
Connected in delta for dispatch
B23
all
all
66.10 66.10 66.10 66.10 66.10
66.10
66.10
66.10
66.10
66.10
66.10
B31
all
all
312.–
312.–
312.–
312.–
312.–
312.–
312.–
312.–
312.–
312.–
312.–
B32
all
all
312.–
312.–
312.–
312.–
312.–
312.–
312.–
312.–
312.–
312.–
312.–
F83
all except .
6310.– 6730.– 7300.– 7720.– 8820.–
9850.–
10400.– 10400.– 11600.– 13200.– 13200.–
L99
M32
M33
all
all
all

–
39.–
39.–
–
39.–
–
48.40
–
48.40
–
48.40
–
48.40





all
all
all



–
29.70 29.70 29.70 29.70 39.–
29.70 29.70 29.70 29.70 39.–
For legends and footnotes, see Page 2/96.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/95
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Options
Cast-iron series 1LA6, 1LG4, 1LG6, 1LP4, 1PP4
Standard delivery times in working days:
10
20
On
request
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


*)
For 1LG6312-2MA.., 1LG6312-4MA.., 1LG6318-2MB.. and 1LG6318-4MA..
motors, it is not possible to use the options for country certificates (D31,
D33, D34, D35, D40), marine certificates (E11, E21, E31, E51), explosionproof version (M72, M73, M34, M35, M38, M39, M74, M75, C27), brakes,
brakes with encoder (G26, H47, H62, H63, H64, H98, H99), low-noise
versions (K37, K38) and mounting of a separately driven fan, separately
driven fan with encoder (G17, H61, H64, H97, H99).
2
1)
Evaluation with appropriate tripping unit (see Catalog IC 10) is recommended. For pole-changing motors with separate windings, the number of
temperature sensors must be doubled (order code A11, prices of A12 or
order code A12, prices available on request)
21)
In combination with order code D02, the motor achieves IP54 degree of
protection.
22)
Possible up to 600 V max. Order with voltage code 9 and order code for
voltage and frequency. The rated voltage is indicated on the rating plate.
Order codes D30 and D31 do not authorize importing into USA and
Mexico. The North America export version of the 1LG6 with order code
D41 NEMA Premium Efficient or D42 NEMA Energy Efficient is available for
this purpose.
23)
The 2, 4 and 6-pole IE2 motors 1LA9 and 1LG6 in the 0.75 kW to 200 kW
range for 50 Hz output at 60 Hz are certified for Korea.
24)
Order with voltage code 9 and order code for voltage and frequency. The
rated voltage is indicated on the rating plate. Order code D40 does not
authorize importing into Canada. The North America export version of the
1LG6 with order code D41 NEMA Premium Efficient or D42 NEMA Energy
Efficient is available for this purpose.
2)
For 1LG6 motors with special insulation for converter-fed operation, order
code A72 is not possible for frame sizes 225 to 315 in combination with
the option "Insulated bearing cartridge " – Order code L27.
3)
For 1LG4 pole-changing motors in frame size 200, Pt100 bearing monitoring is only possible at the drive end (DE).
25)
4)
In combination with the PTC thermistor option or anti-condensation
heating option, please inquire before ordering.
"Small power motors" with a rated output of up to 3 kW which are exported
to Japan must bear the correct marking.
26)
5)
Possible in combination with order code L44 to L49 or length specification
in plain text.
6)
For 1LG4 pole-changing motors, 1LG6 motors with special insulation for
converter-fed operation and 1PP4 forced-air cooled motors, in combination with the PTC thermistor option or anti-condensation heating option,
please inquire before ordering.
Not possible for 2-pole motors, frame size 315 L in vertical types of
construction; bearings for increased cantilever forces at vibration quantity
level B are available on request for motors of frame size 180 and above.
Not possible for motors of frame size 180 and above in the combination
"Concentricity of the shaft extension, coaxiality and linear movement in
accordance with DIN 42955 Tolerance R for flange-mounting motors" –
Order code K04.
7)
Cannot be used for motors in UL version (order code D31). Cannot be
used for motors according to CSA approval (order code D40) for
1LG4/1LG6 motor series. The grease lifetime specified in Catalog D 81.1 ·
2008 in Section 0 "Introduction" refers to CT 40 °C. When the coolant
temperature rises by 10 K, the grease service lifetime or relubrication
interval is halved.
27)
With 4-pole to 8-pole motors of frame size 280 and above, standard
version.
28)
For 1LG6 motors with special insulation for converter-fed operation, this
option is not possible for frame sizes 225 to 315 in combination with the
option "Installation of 2 Pt100 screw-in resistance thermometers in basic
circuit for rolling-contact bearings" – Order code A72.
29)
Can be combined with deep-groove bearings of series 60.., 62.. and 63…
Not possible in combination with parallel roller bearings (e.g. bearings for
increased cantilever forces, order code K20), brake mounting or encoder
mounting.
30)
Possible for motors of frame size 315 and above in vertical types of
construction or 2-pole for version with second shaft extension on request.
Version with protective cover not possible.
31)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Not valid for: Conical shafts, non-standard threaded journals, non-standard shaft tolerances, friction welded
journals, extremely "thin" shafts, special geometry dimensions (e.g. square
journals), hollow shafts. Valid for non-standard shaft extensions DE or
NDE. The feather keys are supplied in every case. For order codes Y58,
Y59 and K16, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension
For an explanation of the order codes, see Catalog D 81.1 · 2008
Part 0 "Introduction".
32)
The special requirements of the textile industry regarding the sheet metal
cover open up the possibility that a finger may be inserted between the
cover and enclosure. The customer must implement appropriate
measures to ensure that the installed system is "finger-safe".
33)
Converter-fed operation is permitted for 1LG motors with metal external
fans.
The metal external fan is not possible in combination with the low-noise
version – Order code F37 or F38.
34)
Can be ordered for 230 VΔ/400 VY or 400 VΔ/690 VY (voltage code 1 or 6).
Not possible for pole-changing motors, naturally cooled motors, 8-pole
motors and in combination with order code D34.
35)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
36)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300.
8)
Not possible for 1LG4 motors with increased output.
9)
Order identically priced predecessor type for 1LG6...2AA../ 2-pole motors
or 1LG6...4AA.. 4-pole motors using the options for country certificates
(D31, D33, D34, D35, D40), marine certificates (E11, E21, E31, E51),
explosion-proof version (M72, M73, M34, M35, M38, M39, M74, M75, C27)
and IE3 version for SH 315 (D25).
10)
For frame sizes 100 to 160, do not specify an order code. Order code is
only necessary for frame sizes 180 to 315.
11)
Second shaft extension is not possible, with mounted brake on request.
The order codes listed cannot be combined within the various technologies nor with each other within the same technology system.
This applies for:
– Modular technology
– Basic versions of "Modular technology"
– Combinations of basic versions "Special technology"
12)
For 1LG4/1LG6 motors, order codes G17, G26 and H63 frame size 225
and above can also be combined with all rotary pulse encoders in the
"Special technology" range.
13)
The standard brake supply voltage is 230 V AC, 50/60 Hz. Other brake
supply voltages are possible with order codes C00 and C01.
14)
Not available for 2-pole motors of frame size 180 and above.
15)
For 1LG4 motors, in the low-noise version, a second shaft extension
and/or encoder mounting is not possible. Not necessary for 1LG6 motors
because these motors are already noise optimized.
16)
Not possible in combination with rotary pulse encoder HOG 9 D 1024 l
(order code H72, H79) and/or brake 2LM8 (used for motors up to and
including frame size 225, order code G26).
17)
Not possible in combination with brake 2LM8 (used for motors up to and
including frame size 225, order code G26).
18)
Supplied with the condensation drainage holes sealed at the drive end DE
and non-drive end NDE (IP55, IP56, IP65). If condensation drainage holes
are required in motors of the IM B6, IM B7 or IM B8 type of construction
(feet located on side or top), it is necessary to relocate the bearing plates
at the drive end (DE) and non-drive end (NDE) so that the condensation
drainage holes situated between the feet on delivery are underneath.
19)
Not necessary when a rotary pulse encoder is combined with a separately
driven fan, because in this case the rotary pulse encoder is installed under
the fan cover.
20)
For 1LG6 motors with special insulation for converter-fed operation, in
connection with mountings, the respective technical data must be
observed, please inquire before ordering.
2/96
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Standard delivery times in working days:
10
20
Supplements to article numbers and special versions
On
request
Accessories
■ Overview
Modular technology
The components of modular technology can be ordered
asaccessories. The brake, as a safety-related module, must
not be retrofitted.
Cables for rotary pulse encoders can be ordered from Catalog
DA 65.10.
Mounting of rotary pulse encoder and separately driven fan for 1LA5, 1LA6, 1LA7 and 1LG motors
Version
Frame size
Number of poles
Article No.
Rotary pulse
HTL version
100 ... 225
all
1XP8 001-1
1)
encoder
TTL version
100 ... 225
all
1XP8 001-2
Separately driven fan
100
all
2CW2180-8RF54-1AB0
incl. mounting parts 2)
112
all
2CW2210-8RF54-1AB1
132
all
2CW2250-8RF54-1AB2
160
all
2CW2300-8RF54-1AB3
180
all
2CW2300-8RF54-1AB4
200
all
2CW2300-8RF54-1AB5
225 3)
all
2CW2300-8RF54-1AB6
250
all
1PP9063-2LA12-ZA11+K50 4)
280
all
1PP9063-2LA12-ZA11+K50 4)
315
2
1PP9070-2LA12-ZA11+K50 4)
315
4 to 8
1PP9063-2LA12-ZA11+K50 4)
Separately driven fan and rotary pulse
100
all
2CW2180-8RF54-2AB0
encoder 1XP8001-1
112
all
2CW2210-8RF54-2AB1
2)
incl. mounting parts
132
all
2CW2250-8RF54-2AB2
160
all
2CW2300-8RF54-2AB3
180
all
2CW2300-8RF54-2AB4
200
all
2CW2300-8RF54-2AB5
225 3)
all
2CW2300-8RF54-2AB6
Price
546.–
824.–
455.–
492.–
500.–
563.–
723.–
848.–
848.–
on request
on request
on request
on request
1000.–
1040.–
1040.–
1110.–
1270.–
1390.–
1390.–
Weight
kg
0.3
0.3
3.9
4.4
6.7
7.2
9.8
10.7
10.7
4.2
4.7
6.0
7.5
10.1
11.0
11.0
Encoder mounting
In the case of mounting by the customer.
Options H79, H80
Baumer Hübner GmbH
Postfach 126943
10609 Berlin, Germany
Tel. 030-690 03-0
Fax 030-690 03-104
www.baumerhuebner.com
e-mail: info@baumerhuebner.com
Option H78
Leine & Linde (Deutschland) GmbH
Bahnhofstraße 36
73430 Aalen, Germany
Tel. 07361-78 093-0
Fax 07361-78 093-11
www.leinelinde.com
e-mail: info@leinelinde.se
1)
2)
For motor series 1LG, the rotary pulse encoders are available on request.
They are only available for motor series 1LA7 as accessories for spare
parts.
3)
For 1LG motors with separately driven fan with Article No. 1PP9063-2LA12Z A11+K50 (weight 4.37 kg).
4)
Only for replacement purposes.
The separately driven fan 2CW2 ... comprises a complete fan unit with
impeller, the separately driven fan 1PP9 ... only comprises the fan motor
without mounting components and impeller.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
2/97
2
© Siemens AG 2015
SIMOTICS SD 1LA/1LG/1LP/1PP Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
Notes
20
On
request
2
2/98
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
3
© Siemens AG 2015
SIMOTICS N-compact
Non-Standard Motors
3/2
3/2
3/2
3/2
3/3
3/3
3/3
3/4
3/4
3/5
3/5
Motors specially designed for
mains-fed operation
Self-ventilated motors
Cast-iron series 1LA8
with Premium Efficiency IE3
Self-ventilated motors
Cast-iron series 1LA8
with High Efficiency IE2
Self-ventilated motors
with through-ventilation
Cast-iron series 1LL8
with High Efficiency IE2
Motors specially designed for
converter-fed operation
Self-ventilated motors
Cast-iron series 1LA8
with standard insulation for ≤ 500 V
Self-ventilated motors
Cast-iron series 1LA8 with special
insulation for > 500 to 690 V
Self-ventilated motors
with through-ventilation
Cast-iron series 1LL8
with standard insulation for ≤ 500 V
Self-ventilated motors
with through-ventilation
Cast-iron series 1LL8
with standard insulation for > 500 to 690 V
Forced-air cooled motors
with mounted separately driven fan
Cast-iron series 1PQ8
with standard insulation for ≤ 500 V
Forced-air cooled motors with
mounted separately driven fan
Cast-iron series 1PQ8
with standard insulation
for > 500 to 690 V
3/6
Supplements to article numbers and
3/6
3/7
3/8
special versions
Voltages
Types of construction
Options
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview
Category
Motors specially designed for mains-fed operation
Series version
Cast-iron series 1LA8
with Premium Efficiency IE3
Self-ventilated (IC 411)
IP55, optionally IP56
(non-heavy-sea) or IP65
Thermal class 155 (F),
optionally 180 (H)
Thermal class 130 (B)
2, 4, 6
315 ... 355
200 ... 355 kW
1000 ... 3600 rpm
801 ... 3418 Nm
Cooling
Degree of protection
Insulation
3
Cast-iron series 1LA8
with High Efficiency IE2
Self-ventilated (IC 411)
IP55, optionally IP56
(non-heavy-sea) or IP65
Thermal class 155 (F),
optionally 180 (H)
Thermal class 130 (B)
2, 4, 6, 8
315 ... 450
160 ... 1000 kW
750 ... 3600 rpm
801 ... 8090 Nm
Cast-iron series 1LL8
with High Efficiency IE2
Self-ventilated with through-ventilation (IC 01)
IP23
Thermal class 155 (F),
optionally 180 (H)
Thermal class 130 (B)
2, 4, 6, 8
315 ... 450
200 ... 1250 kW
750 ... 3600 rpm
1010 ... 10300 Nm
Utilization
Number of poles
Frame sizes (FS)
Rated output at 50 Hz
Synchronous speed
Rated torque
at 50 Hz
Efficiency
Premium Efficiency IE3
High Efficiency IE2
High Efficiency IE2
Metal factor for metal
N-W----N-W----N-W----surcharges (MS)
Price group
3ZT
3ZT
3ZT
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 3/6, for delivery times refer to colored background following the respective price)
Frame size
Prated, IE
Article No.
Base
Prated, IE
Article No.
Base
Prated, IE
Article No.
Base
price
price
price
50 Hz Class  New
50 Hz Class  New
50 Hz Class
FS
kW
EUR
kW
 Standardline
EUR
kW
EUR
2-pole: 3000 rpm at 50 Hz
315
250 IE3
1LA8315-2EC.. 48400.– 250
IE2
1LA8315-2AC.. 44000.– 315 IE2
1LL8315-2AC..
45800.–
315
315 IE3
1LA8317-2EC.. 60900.– 315
IE2
1LA8317-2AC.. 55400.– 400 –
1LL8317-2AC..
57800.–
355
355 IE3
1LA8353-2EC.. 69000.– 355
IE2
1LA8353-2AC.. 62700.– 450 –
1LL8353-2AD..
65000.–
355
400
–
1LA8355-2AC.. 71600.– 500 –
1LL8355-2AD..
74500.–
355
500
–
1LA8357-2AC.. 93200.– 630 –
1LL8357-2AD..
93800.–
400
560
–
1LA8403-2AC.. 101000.– 710 –
1LL8403-2AD.. 103000.–
400
630
–
1LA8405-2AC.. 113000.– 800 –
1LL8405-2AD.. 117000.–
400
710
–
1LA8407-2AC.. 128000.– 900 –
1LL8407-2AD.. 131000.–
450
800
–
1LA8453-2AE.. 148000.– 1000 –
1LL8453-2AE.. 153000.–
450
900
–
1LA8455-2AE.. 163000.– 1120 –
1LL8455-2AE.. 171000.–
450
1000 –
1LA8457-2AE.. 186000.– 1250 –
1LL8457-2AE.. 192000.–
4-pole: 1500 rpm at 50 Hz
315
250 IE3
1LA8316-4EB.. 45300.– 250
IE2  1LA8315-4AB.. 41200.– 315 IE2
1LL8315-4AC..
42700.–
315
315 IE3
1LA8318-4EB.. 57200.– 315
IE2  1LA8317-4AB.. 52000.– 400 –
1LL8317-4AC..
53800.–
355
355 IE3
1LA8353-4EB.. 64800.– 355
IE2  1LA8353-4AB.. 58900.– 450 –
1LL8353-4AC..
61600.–
355
400
–
 1LA8355-4AB.. 66600.– 500 –
1LL8355-4AC..
69000.–
355
500
–
 1LA8357-4AB.. 86500.– 630 –
1LL8357-4AC..
85200.–
400
560
–
1LA8403-4AB.. 93800.– 710 –
1LL8403-4AC..
96800.–
400
630
–
1LA8405-4AB.. 106000.– 800 –
1LL8405-4AC.. 104000.–
400
710
–
1LA8407-4AB.. 119000.– 900 –
1LL8407-4AC.. 124000.–
450
800
–
1LA8453-4AC.. 135000.– 1000 –
1LL8453-4AD.. 139000.–
450
900
–
1LA8455-4AC.. 153000.– 1120 –
1LL8455-4AD.. 159000.–
450
1000 –
1LA8457-4AC.. 171000.– 1250 –
1LL8457-4AD.. 175000.–
6-pole: 1000 rpm at 50 Hz
315
200 IE3
1LA8317-6EB.. 53600.– 200
IE2
1LA8315-6AB.. 48700.– 250 IE2
1LL8315-6AC..
50600.–
315
250 IE3
1LA8318-6EB.. 67300.– 250
IE2
1LA8317-6AB.. 61200.– 315 IE2
1LL8317-6AC..
63400.–
355
315 IE3
1LA8355-6EB.. 86800.– 315
IE2
1LA8355-6AB.. 78900.– 400 –
1LL8355-6AC..
82100.–
355
355 IE3
1LA8356-6EB.. 93700.– 355
IE2
1LA8356-6AB.. 84300.–
355
400
–
1LA8357-6AB.. 91400.– 500 –
1LL8357-6AC..
96000.–
400
450
–
1LA8403-6AB.. 104000.– 560 –
1LL8403-6AC.. 107000.–
400
500
–
1LA8405-6AB.. 113000.– 630 –
1LL8405-6AC.. 117000.–
400
560
–
1LA8407-6AB.. 129000.– 710 –
1LL8407-6AC.. 134000.–
450
630
–
1LA8453-6AB.. 145000.– 800 –
1LL8453-6AD.. 152000.–
450
710
–
1LA8455-6AB.. 161000.– 900 –
1LL8455-6AD.. 166000.–
450
800
–
1LA8457-6AB.. 180000.– 1000 –
1LL8457-6AD.. 189000.–
8-pole: 750 rpm at 50 Hz
315
160
–
1LA8315-8AB.. 48700.– 200 –
1LL8315-8AC..
50600.–
315
200
–
1LA8317-8AB.. 59900.– 250 –
1LL8317-8AC..
63400.–
355
250
–
1LA8355-8AB.. 77600.– 315 –
1LL8355-8AC..
80400.–
355
315
–
1LA8357-8AB.. 95200.– 400 –
1LL8357-8AC..
98600.–
400
355
–
1LA8403-8AB.. 104000.– 450 –
1LL8403-8AD.. 107000.–
400
400
–
1LA8405-8AB.. 113000.– 500 –
1LL8405-8AD.. 118000.–
400
450
–
1LA8407-8AB.. 135000.– 560 –
1LL8407-8AD.. 139000.–
450
500
–
1LA8453-8AB.. 152000.– 630 –
1LL8453-8AD.. 158000.–
450
560
–
1LA8455-8AB.. 168000.– 710 –
1LL8455-8AD.. 175000.–
450
630
–
1LA8457-8AB.. 192000.– 800 –
1LL8457-8AD.. 199000.–
3/2
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors specially designed for converter-fed operation — optimally matched to
SINAMICS and SIMOVERT MASTERDRIVES drive systems
Series version
Cast-iron series 1LA8
with standard insulation for ≤ 500 V
Self-ventilated (IC 411)
IP55, optionally IP56 (non-heavy-sea)
or IP65
Thermal class 155 (F),
optionally 180 (H)
Thermal class 155 (F)
2, 4, 6, 8
315 ... 450
160 ... 1000 kW
750 ... 3600 rpm
801 ... 8090 Nm
Cooling
Degree of protection
Insulation
Cast-iron series 1LA8
with special insulation for > 500 to 690 V
Self-ventilated (IC 411)
IP55, optionally IP56 (non-heavy-sea)
or IP65
Thermal class 155 (F),
optionally 180 (H)
Thermal class 155 (F)
2, 4, 6, 8
315 ... 450
145 ... 980 kW
750 ... 3600 rpm
770 ... 7691 Nm
Utilization
Number of poles
Frame sizes (FS)
Rated output at 50 Hz
Synchronous speed
Rated torque
at 50 Hz
Efficiency
High Efficiency
High Efficiency
Metal factor for metal
N-W----N-W----surcharges (MS)
Price group
3ZT
3ZT
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 3/6, for delivery times refer to colored background following the respective price)
Frame size
Prated,
Article No.
Base
Prated,
Article No.
Base
price
price
50 Hz  New
50 Hz  New
FS
kW
 Standardline
EUR
kW
EUR
2-pole: 3000 rpm at 50 Hz
315
250
1LA8315-2PC..
48300.– 240
1LA8315-2PM..
59900.–
315
315
1LA8317-2PC..
59600.– 300
1LA8317-2PM..
71400.–
355
355
1LA8353-2PC..
67000.– 345
1LA8353-2PM..
83000.–
355
400
1LA8355-2PC..
75700.– 390
1LA8355-2PM..
91400.–
355
500
1LA8357-2PC..
96500.– 485
1LA8357-2PM.. 112000.–
400
560
1LA8403-2PC.. 104000.– 545
1LA8403-2PM.. 124000.–
400
630
1LA8405-2PC.. 116000.– 610
1LA8405-2PM.. 136000.–
400
710
1LA8407-2PC.. 131000.– 680
1LA8407-2PM.. 152000.–
450
800
1LA8453-2PE.. 152000.– 775
1LA8453-2PM.. 164000.–
450
900
1LA8455-2PE.. 164000.– 875
1LA8455-2PM.. 187000.–
450
1000
1LA8457-2PE.. 191000.– 970
1LA8457-2PM.. 207000.–
4-pole: 1500 rpm at 50 Hz
315
250  1LA8315-4PB..
45400.– 235
1LA8315-4PM..
59500.–
315
315  1LA8317-4PB..
56000.– 290
1LA8317-4PM..
70000.–
355
355  1LA8353-4PB..
63400.– 340
1LA8353-4PM..
82100.–
355
400  1LA8355-4PB..
70700.– 385
1LA8355-4PM..
88300.–
355
500  1LA8357-4PB..
88600.– 480
1LA8357-4PM.. 108000.–
400
560
1LA8403-4PB..
98600.– 545
1LA8403-4PM.. 114000.–
400
630
1LA8405-4PB.. 110000.– 615
1LA8405-4PM.. 131000.–
400
710
1LA8407-4PB.. 124000.– 690
1LA8407-4PM.. 139000.–
450
800
1LA8453-4PC.. 139000.– 785
1LA8453-4PM.. 159000.–
450
900
1LA8455-4PC.. 159000.– 880
1LA8455-4PM.. 174000.–
450
1000
1LA8457-4PC.. 175000.– 980
1LA8457-4PM.. 194000.–
6-pole: 1000 rpm at 50 Hz
315
200
1LA8315-6PB..
52900.– 190
1LA8315-6PM..
67900.–
315
250
1LA8317-6PB..
65000.– 235
1LA8317-6PM..
79800.–
355
315
1LA8355-6PB..
83000.– 300
1LA8355-6PM.. 102000.–
355
355
1LA8356-6PB..
89100.– 340
1LA8356-6PM.. 109000.–
355
400
1LA8357-6PB..
96000.– 380
1LA8357-6PM.. 115000.–
400
450
1LA8403-6PB.. 109000.– 435
1LA8403-6PM.. 124000.–
400
500
1LA8405-6PB.. 116000.– 485
1LA8405-6PM.. 134000.–
400
560
1LA8407-6PB.. 134000.– 545
1LA8407-6PM.. 152000.–
450
630
1LA8453-6PB.. 151000.– 615
1LA8453-6PM.. 164000.–
450
710
1LA8455-6PB.. 164000.– 690
1LA8455-6PM.. 175000.–
450
800
1LA8457-6PB.. 186000.– 780
1LA8457-6PM.. 200000.–
8-pole: 750 rpm at 50 Hz
315
160
1LA8315-8PB..
52900.– 145
1LA8315-8PM..
64800.–
315
200
1LA8317-8PB..
64100.– 180
1LA8317-8PM..
75700.–
355
250
1LA8355-8PB..
81500.– 230
1LA8355-8PM..
97600.–
355
315
1LA8357-8PB..
99200.– 290
1LA8357-8PM.. 115000.–
400
355
1LA8403-8PB.. 109000.– 335
1LA8403-8PM.. 122000.–
400
400
1LA8405-8PB.. 117000.– 375
1LA8405-8PM.. 131000.–
400
450
1LA8407-8PB.. 139000.– 425
1LA8407-8PM.. 154000.–
450
500
1LA8453-8PB.. 158000.– 485
1LA8453-8PM.. 174000.–
450
560
1LA8455-8PB.. 174000.– 545
1LA8455-8PM.. 194000.–
450
630
1LA8457-8PB.. 196000.– 600
1LA8457-8PM.. 208000.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
3
3/3
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors specially designed for converter-fed operation — optimally matched to
SINAMICS and SIMOVERT MASTERDRIVES drive systems (continued)
Series version
Cast-iron series 1LL8
with standard insulation for ≤ 500 V
Self-ventilated with through-ventilation
(IC 01)
IP23
Cast-iron series 1LL8
with special insulation for > 500 to 690 V
Self-ventilated with through-ventilation
(IC 01)
IP23
Thermal class 155 (F),
optionally 180 (H)
Thermal class 155 (F)
2, 4, 6, 8
315 ... 450
200 ... 1250 kW
750 ... 3600 rpm
1010 ... 10300 Nm
Thermal class 155 (F),
optionally 180 (H)
Thermal class 155 (F)
2, 4, 6, 8
315 ... 450
180 ... 1225 kW
750 ... 3600 rpm
962 ... 9782 Nm
Cooling
Degree of protection
Insulation
3
Utilization
Number of poles
Frame sizes (FS)
Rated output at 50 Hz
Synchronous speed
Rated torque
at 50 Hz
Efficiency
High Efficiency
High Efficiency
Metal factor for metal
N-W----N-W----surcharges (MS)
Price group
3ZT
3ZT
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 3/6, for delivery times refer to colored background following the respective price)
Frame size
Prated,
Article No.
Base
Prated,
Article No.
Base
price
price
50 Hz
50 Hz
FS
2-pole: 3000 rpm at 50 Hz
315
315
355
355
355
400
400
400
450
450
450
4-pole: 1500 rpm at 50 Hz
315
315
355
355
355
400
400
400
450
450
450
6-pole: 1000 rpm at 50 Hz
315
315
355
kW
355
400
400
400
450
450
450
8-pole: 750 rpm at 50 Hz
315
315
355
355
400
400
400
450
450
450
3/4
EUR
kW
EUR
315
400
450
500
630
710
800
900
1000
1120
1250
1LL8315-2PC..
1LL8317-2PC..
1LL8353-2PD..
1LL8355-2PD..
1LL8357-2PD..
1LL8403-2PD..
1LL8405-2PD..
1LL8407-2PD..
1LL8453-2PE..
1LL8455-2PE..
1LL8457-2PE..
49900.–
62000.–
69200.–
78600.–
98000.–
108000.–
122000.–
137000.–
159000.–
176000.–
197000.–
300
380
435
485
610
690
770
860
965
1085
1210
1LL8315-2PM..
1LL8317-2PM..
1LL8353-2PM..
1LL8355-2PM..
1LL8357-2PM..
1LL8403-2PM..
1LL8405-2PM..
1LL8407-2PM..
1LL8453-2PM..
1LL8455-2PM..
1LL8457-2PM..
62100.–
74200.–
85800.–
94800.–
114000.–
128000.–
141000.–
159000.–
171000.–
196000.–
214000.–
315
400
450
500
630
710
800
900
1000
1120
1250
1LL8315-4PC..
1LL8317-4PC..
1LL8353-4PC..
1LL8355-4PC..
1LL8357-4PC..
1LL8403-4PC..
1LL8405-4PC..
1LL8407-4PC..
1LL8453-4PD..
1LL8455-4PD..
1LL8457-4PD..
46600.–
57900.–
65700.–
72900.–
88700.–
101000.–
110000.–
129000.–
145000.–
163000.–
182000.–
295
365
430
480
600
690
780
870
980
1095
1225
1LL8315-4PM..
1LL8317-4PM..
1LL8353-4PM..
1LL8355-4PM..
1LL8357-4PM..
1LL8403-4PM..
1LL8405-4PM..
1LL8407-4PM..
1LL8453-4PM..
1LL8455-4PM..
1LL8457-4PM..
61300.–
72700.–
85100.–
91100.–
112000.–
120000.–
136000.–
146000.–
164000.–
178000.–
201000.–
250
315
400
1LL8315-6PC..
1LL8317-6PC..
1LL8355-6PC..
54800.–
67500.–
86400.–
235
295
380
1LL8315-6PM..
1LL8317-6PM..
1LL8355-6PM..
70400.–
82900.–
107000.–
500
560
630
710
800
900
1000
1LL8357-6PC..
1LL8403-6PC..
1LL8405-6PC..
1LL8407-6PC..
1LL8453-6PD..
1LL8455-6PD..
1LL8457-6PD..
100000.–
112000.–
122000.–
137000.–
158000.–
170000.–
194000.–
475
540
610
690
780
870
975
1LL8357-6PM..
1LL8403-6PM..
1LL8405-6PM..
1LL8407-6PM..
1LL8453-6PM..
1LL8455-6PM..
1LL8457-6PM..
120000.–
128000.–
139000.–
158000.–
171000.–
182000.–
210000.–
200
250
315
400
450
500
560
630
710
800
1LL8315-8PC..
1LL8317-8PC..
1LL8355-8PC..
1LL8357-8PC..
1LL8403-8PD..
1LL8405-8PD..
1LL8407-8PD..
1LL8453-8PD..
1LL8455-8PD..
1LL8457-8PD..
54800.–
67500.–
84500.–
103000.–
112000.–
123000.–
143000.–
162000.–
182000.–
204000.–
180
225
285
365
420
465
525
610
690
760
1LL8315-8PM..
1LL8317-8PM..
1LL8355-8PM..
1LL8357-8PM..
1LL8403-8PM..
1LL8405-8PM..
1LL8407-8PM..
1LL8453-8PM..
1LL8455-8PM..
1LL8457-8PM..
67100.–
79800.–
101000.–
118000.–
125000.–
139000.–
159000.–
180000.–
203000.–
217000.–
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors specially designed for converter-fed operation — optimally matched to
SINAMICS and SIMOVERT MASTERDRIVES drive systems (continued)
Series version
Cast-iron series 1PQ8
with standard insulation for ≤ 500 V
Forced-air cooled with mounted
separately driven fan (IC 416)
IP55, optionally IP56 (non-heavy-sea)
or IP65
Thermal class 155 (F),
optionally 180 (H)
Thermal class 155 (F)
2, 4, 6, 8
315 ... 450
160 ... 1000 kW
750 ... 3600 rpm
801 ... 8090 Nm
Cast-iron series 1PQ8
with special insulation for > 500 to 690 V
Forced-air cooled with mounted
separately driven fan (IC 416)
IP55, optionally IP56 (non-heavy-sea)
or IP65
Thermal class 155 (F),
optionally 180 (H)
Thermal class 155 (F)
2, 4, 6, 8
315 ... 450
145 ... 980 kW
750 ... 3600 rpm
770 ... 7691 Nm
kW
EUR
kW
Cooling
Degree of protection
Insulation
Utilization
Number of poles
Frame sizes (FS)
Rated output at 50 Hz
Synchronous speed
Rated torque
at 50 Hz
Efficiency
High Efficiency
High Efficiency
Metal factor for metal
N-W----N-W----surcharges (MS)
Price group
3ZT
3ZT
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 3/6, for delivery times refer to colored background following the respective price)
Frame size
Prated,
Article No.
Base
Prated,
Article No.
Base
price
price
50 Hz  New
50 Hz  New
FS
2-pole: 3000 rpm at 50 Hz
315
315
355
355
355
400
400
400
450
450
450
4-pole: 1500 rpm at 50 Hz
315
315
355
355
355
400
400
400
450
450
450
6-pole: 1000 rpm at 50 Hz
315
315
355
355
355
400
400
400
450
450
450
8-pole: 750 rpm at 50 Hz
315
315
355
355
400
400
400
450
450
450
250
315
355
400
500
560
630
710
800
900
1000
1PQ8315-2PC..
1PQ8317-2PC..
1PQ8353-2PC..
1PQ8355-2PC..
1PQ8357-2PC..
1PQ8403-2PC..
1PQ8405-2PC..
1PQ8407-2PC..
1PQ8453-2PE..
1PQ8455-2PE..
1PQ8457-2PE..
58400.–
69900.–
78300.–
86100.–
106000.–
116000.–
128000.–
143000.–
162000.–
180000.–
199000.–
240
300
345
390
485
545
610
680
775
875
970
1PQ8315-2PM..
1PQ8317-2PM..
1PQ8353-2PM..
1PQ8355-2PM..
1PQ8357-2PM..
1PQ8403-2PM..
1PQ8405-2PM..
1PQ8407-2PM..
1PQ8453-2PM..
1PQ8455-2PM..
1PQ8457-2PM..
70000.–
81500.–
94500.–
101000.–
122000.–
129000.–
140000.–
160000.–
174000.–
194000.–
212000.–
250
315
355
400
500
560
630
710
800
900
1000
1PQ8315-4PB..
1PQ8317-4PB..
1PQ8353-4PB..
1PQ8355-4PB..
1PQ8357-4PB..
1PQ8403-4PB..
1PQ8405-4PB..
1PQ8407-4PB..
1PQ8453-4PC..
1PQ8455-4PC..
1PQ8457-4PC..
55600.–
66100.–
74800.–
82100.–
99300.–
110000.–
122000.–
135000.–
153000.–
168000.–
189000.–
235
290
340
385
480
545
615
690
785
880
980
1PQ8315-4PM..
1PQ8317-4PM..
1PQ8353-4PM..
1PQ8355-4PM..
1PQ8357-4PM..
1PQ8403-4PM..
1PQ8405-4PM..
1PQ8407-4PM..
1PQ8453-4PM..
1PQ8455-4PM..
1PQ8457-4PM..
67100.–
77600.–
90700.–
97600.–
115000.–
122000.–
135000.–
151000.–
164000.–
184000.–
200000.–
200
250
315
355
400
450
500
560
630
710
800
1PQ8315-6PB..
1PQ8317-6PB..
1PQ8355-6PB..
1PQ8356-6PB..
1PQ8357-6PB..
1PQ8403-6PB..
1PQ8405-6PB..
1PQ8407-6PB..
1PQ8453-6PB..
1PQ8455-6PB..
1PQ8457-6PB..
63100.–
75000.–
93800.–
99600.–
106000.–
119000.–
128000.–
145000.–
161000.–
175000.–
196000.–
190
235
300
340
380
435
485
545
615
690
780
1PQ8315-6PM..
1PQ8317-6PM..
1PQ8355-6PM..
1PQ8356-6PM..
1PQ8357-6PM..
1PQ8403-6PM..
1PQ8405-6PM..
1PQ8407-6PM..
1PQ8453-6PM..
1PQ8455-6PM..
1PQ8457-6PM..
74600.–
86100.–
109000.–
115000.–
120000.–
131000.–
140000.–
159000.–
174000.–
187000.–
209000.–
160
200
250
315
355
400
450
500
560
630
1PQ8315-8PB..
1PQ8317-8PB..
1PQ8355-8PB..
1PQ8357-8PB..
1PQ8403-8PB..
1PQ8405-8PB..
1PQ8407-8PB..
1PQ8453-8PB..
1PQ8455-8PB..
1PQ8457-8PB..
63300.–
74000.–
93200.–
109000.–
119000.–
128000.–
152000.–
166000.–
187000.–
206000.–
145
180
230
290
335
375
425
485
545
600
1PQ8315-8PM..
1PQ8317-8PM..
1PQ8355-8PM..
1PQ8357-8PM..
1PQ8403-8PM..
1PQ8405-8PM..
1PQ8407-8PM..
1PQ8453-8PM..
1PQ8455-8PM..
1PQ8457-8PM..
74600.–
84300.–
107000.–
124000.–
131000.–
141000.–
163000.–
182000.–
199000.–
219000.–
Recommended retail prices plus metal surcharges (MS)
3
EUR
Siemens D 81.1 P · 03/2015
3/5
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Voltages
Cast-iron series 1LA8, 1LL8, 1PQ8
10
20
On
request
■ Selection and ordering data
Voltages
Voltage
code
11th
position
of the
Article
No.
1PQ8. . . - . . . ■ .
1L . . . . . - . . . ■ .
Voltage at 50 Hz and 50 Hz output
400 VΔ/690 VY 1)
6
8
400 VΔ
4
Additional
identification code
with order
code and
plain text
if required
Motor category
–
Mains-fed
operation
1LA8,
1LL8
Converter-fed
operation with
standard insulation
Mains-fed
operation
Converter-fed
operation with
standard insulation
Mains-fed
operation
Converter-fed
operation with
standard insulation
Mains-fed
operation
1LA8,
1LL8,
1PQ8
–
–
3
500 VΔ
690 VΔ 1)
5
0
7
–
–
–
Voltage at 60 Hz and required output at 60 Hz
L2C
380 VΔ/660 VY, 50 Hz output 6) 9
380 VΔ/660 VY, 60 Hz output 6) 9
L2D
440 VΔ, 50 Hz output 6)
9
L2R
9
L2X
440 VΔ, 60 Hz output 6)
460 VΔ, 50 Hz output 6)
9
L2T
460 VΔ, 60 Hz output 6)
9
L2F
9
L2V
575 VΔ, 50 Hz output
575 VΔ, 60 Hz output
9
L2M
Non-standard voltage and/or frequencies
9
L8Y • and
Standard winding 8)
identification code
9)
Non-standard winding
9
L1Y • and
identification code


•
–
Motor
version
Motor
type
Mains-fed
operation
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Motor
Motor
version
type
2, 4
6
8
2, 4
6
8


















–
–




–
–




1LA8,
1LL8
1LA8,
1LL8,
1PQ8
2, 4, 6, 8
–
–
–
–
2, 4
6
8









1LA8,
1LL8
1LA8,
1LL8,
1PQ8
2, 4, 6, 8


2, 4, 6, 8

1LA8,
1LL8
Converter-fed 1LA8,
operation with 1LL8,
standard insu- 1PQ8
lation
2, 4
6
8
2, 4
6
8
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
–
–

 2)
–
–

 2)
–
–
–
–
–




–
–
–
–













– 3)
– 3)
– 3)
– 5)
– 5)
– 3)
– 3)
– 3)
– 3)
– 5)
– 5)
– 3)
– 3)
– 3)
– 3)
– 5)
– 5)
– 3)


– 3)
– 3)
– 3)
– 3)




– 5)
– 3)
– 5)
– 3)
– 3)


 4)


 4)
all
all
all
all
all
all
all
all
441.–
441.–
441.–
441.–
441.–
441.–
441.–
441.–
650.– 7)
650.–
650.–
650.–
650.–
650.–
650.–
650.–
804.– 7)
804.–
804.–
804.–
804.–
804.–
804.–
804.–
804.– 7)
804.–
804.–
804.–
804.–
804.–
804.–
804.–
899.– 7)
899.–
899.–
899.–
899.–
899.–
899.–
899.–
899.– 7)
899.–
899.–
899.–
899.–
899.–
899.–
899.–
899.– 7)
899.–
899.–
899.–
899.–
899.–
899.–
899.–
all
all
332.–
332.–
332.–
332.–
332.–
332.–
332.–
all
all
2910.–
3600.–
4310.–
4310.–
5070.–
5070.–
5070.–
1)
Operation of the 1LA8, 1LL8 and 1PQ8 motors with standard insulation is
only possible when connected to a converter (du/dt or sine-wave filter).
2)
Not possible for 8-pole motors 1LL8 457-8.
3)
As special version with voltage code 9 and order code L1Y
(specify output, voltage and frequency).
4)
Not possible for 8-pole motors 1LA8 457-8 and 1PQ8 457-8.
5)
For 1LL8 motors, as special version with voltage code 9 and order code
L1Y (specify output, voltage and frequency).
6)
Only possible with rated outputs of up to 630 kW.
7)
Not possible for 2-pole 1LL8 motors in 60 Hz version of frame size 355 and
above.
Siemens D 81.1 P · 03/2015
–
–
–
–
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
Not possible
3/6
Additional charges plus MS EUR, standard delivery time
(colored area)
Number of Motor type – Frame size
poles
315
355
400
450
2, 4, 6, 8
1LA8
2, 4, 6, 8
1LL8
2, 4, 6, 8
1LA8
2, 4, 6, 8
1LL8
2, 4, 6, 8
1PQ8
Number of Motor type 1LA8 .../1LL8 .../1PQ8 …
poles
315
353
403
407
453
455
457
317
355
405
356
357
– 3)


Note:
The order codes listed above are only valid for motor series
1PQ8 with forced-air cooled motor.
For the mounted separately driven fan, the required voltage/
frequency must be ordered according to order code Y81 "Separately driven fan with non-standard voltage and/or frequency" in
plain text with indication of the voltage, frequency and circuit.
8)
Plain text must be specified in the order: Voltage, frequency, circuit,
required rated output in kW.
Winding according to voltage code:
- 0, 4, 5, 6, 7 or 8 for 1LA8 motors
- 4, 5, 7, 6, 7 or 8 for 1PQ8 motors
- 0, 5 or 6 for 1LL8 motors
The rating plate will be stamped in accordance with identification code.
The order code Y80 is not necessary, as it is included in the price of L8Y.
9)
Plain text must be specified in the order: Voltage between 380 V and 690 V
(voltages outside this range are available on request), frequency, circuit,
required rated output in kW.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Standard delivery times in working days:
10
Supplements to article numbers and special versions
On
request
20
Types of construction
Cast-iron series 1LA8, 1LL8, 1PQ8
■ Selection and ordering data
Types of construction
Type of
construction
code
12th
position
of the
Article
No.
Additional
identification code
with order
code and
plain text
if required
Motor category
Motor
version
Motor
type
Mains-fed
operation
Motor
version
1LA8
1LL8
1LA8
1LL8
1PQ8
Motor
type
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
Frame size
315
355
400
450
Converter-fed
operation
1PQ8. . . - . . . . ■
1L . . . . . - . . . . ■
Without flange
IM B3
0
–
all
all

 1)
 1)
 1)
IM V6
0
–
Mains-fed
operation
1LA8
O. R.
O. R.
O. R.
O. R.
1LL8
–
–
–
–
Converter-fed
operation
1LA8
O. R.
O. R.
O. R.
O. R.
1LL8
–
–
–
–
O. R.
IM V5
With flange
IM V1
without
protective
cover 2)
0
–
1PQ8
O. R.
O. R.
O. R.
Mains-fed
operation
1LA8
O. R.
O. R.
O. R.
O. R.
1LL8
–
–
–
–
Converter-fed
operation
1LA8
O. R.
O. R.
O. R.
O. R.
1LL8
–
–
–
–
1PQ8
O. R.
O. R.
O. R.
O. R.
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
–
A 800
1850.–
1700.–
1850.–
1700.–
1700.–
2930.–
2730.–
2930.–
2730.–
2730.–
2320.–
O. R.
2320.–
O. R.
2110.–
–
A 900
2790.– 3)
2560.– 1)
2790.– 3)
2560.–
2560.– 3)
4310.– 3)
3590.– 1)
4310.–
3590.–
4000.– 3)
3220.–
O. R.
3220.–
O. R.
2970.–
–
A 1000
3870.– 3)
3590.– 1)
3870.– 3)
3590.–
3590.– 3)
5800.– 3)
5350.– 1)
5800.–
5350.–
5350.– 3)
4070.–
O. R.
4070.–
O. R.
3760.–
–
A 1150
5200.– 3)
4620.– 1)
5200.– 3)
4620.–
4790.– 3)
7490.– 3)
6710.– 1)
7490.–
6710.–
6930.– 3)
5070.–
O. R.
5070.–
O. R.
4650.–
acc. to DIN EN 50347
acc. to DIN 42948
8
–
Mains-fed
operation
Converter-fed
operation
IM V1
with
protective
cover 4)
4
IM B35
6
–
Mains-fed
operation
Converter-fed
operation
–
Mains-fed
operation
Converter-fed
operation
Standard version
O. R. Possible on request
–
Not possible
3
Note:
With the same article number supplement in the 12th position,
the respective basic type of construction will always be
specified on the rating plate.

Ordering example:
Selection criteria
Motor type
Motor frame size/No. of poles/Speed
Rated output
Voltage and frequency
Type
Requirement
Non-standard motor specially designed for mains-fed operation,
self-ventilated, cast-iron version, IP55 degree of protection
315/6-pole/1000 rpm
200 kW
400 VΔ/690 VY, 50 Hz
IM V1 with protective cover
1)
Not possible for 2-pole 1LL8 motors in 60 Hz version for mains-fed
operation.
2)
For explosion-proof 1LA8 and 1PQ8 motors, the type of construction IM V1
without protective cover is not possible.
Recommended retail prices plus metal surcharges (MS)
Structure of the Article No.
1LA8■■■-■■■■■
1LA8315-6AB■■
1LA8315-6AB6■
1LA8315-6AB64
3)
For 2-pole 1LA8 and 1PQ8 motors for mains-fed and converter-fed
operation
up to 500 V, the 60 Hz version is not possible.
4)
The "Second shaft extension" option, order code K16 is not possible.
Siemens D 81.1 P · 03/2015
3/7
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA8, 1LL8, 1PQ8
10
On
request
20
■ Selection and ordering data
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
Motor
type
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
-10 %
–
-10 %
–
–
-10 %
–
-10 %
–
–
–
–
–
–
–
–
–
–
–
–
Converter-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z
3
Standardline
Standardline version 1)
The price reduction refers to the
basic machine
Possible range of options:
A23, A61, A72, G50, H70, H73, K09, K10, K45,
K46, K57, K83, K84, K85, L00, L97, M58
(frame size 315 only), M88, Y53
Motor protection
Motor protection with PTC thermistors with
6 embedded temperature sensors for alarm
and tripping 2)
Motor temperature detection with embedded
temperature sensor KTY 84-130 3)
Installation of 6 Pt100 resistance thermometers
in stator winding3)
Installation of 6 Pt100 resistance thermometers
in stator winding, 3-wire circuit from auxiliary
terminal box (option M50 or M88)
Installation of 2 Pt100 screw-in resistance
thermometers in basic circuit for rolling-contact
bearings
Installation of 2 Pt100 screw-in resistance
thermometers for rolling-contact bearings, in
Installation of 2 Pt100 double screw-in
resistance thermometers in 3-wire circuit
for rolling-contact bearings
6 × Pt100 Smart transmitter -40 to +140 °C
Rosemount 4)
Motor connection and connection box
Subsequently rotatable main connection box
Two-part plate on connection box
B20
Motor
version
Mains-fed
operation
Converter-fed
operation
A12
all
all




A23
all
all




A61
all
all
1930.–
1930.–
1930.–
1930.–
A64
all
all
2300.–
2300.–
2300.–
2300.–
A72
all
all
1640.–
1640.–
1640.–
1640.–
A78
all
all
2080.–
2080.–
2080.–
2080.–
A80
all
all
2920.–
2920.–
2920.–
2920.–
M62
all
all
2010.–
2010.–
2010.–
2010.–
J12
K06
all
Mains-fed
operation
438.–
1500.–
1500.–
O. R.
O. R.
O. R. 6)
548.–
1500.–
1500.–
O. R.
O. R.
O. R.
657.–
1500.–
1500.–
O. R.
O. R.
O. R.
766.–
1500.–
1500.–
O. R.
O. R.
O. R.








16200.–
16200.–
16200.–
16200.–
K09
K10
K11
all
all
all
all
1LA8
1LL8
1LA8
1LL8
1PQ8
all
all
all
K57
K83
all
all
all
all
1550.–
3120.–
3120.–
3120.–




K84
all
all




K85
L00
all
Mains-fed
operation


6890.–
6890.–
6890.–
6890.–
6890.–
9860.–
















O. R.
O. R.
508.–
1970.–
1930.–
O. R.
O. R.
508.–
1970.–
1930.–
O. R.
O. R.
508.–
1970.–
1930.–
O. R.
O. R.
508.–
1970.–
1930.–
2400.–
–
–
–
Converter-fed
operation
Connection box on RHS
Connection box on LHS
Connection box on top
(connection box 1XB1634) 7)
DIN 89280 cable gland, maximum configuration
Rotation of the connection box through 90°,
entry from DE
Rotation of the connection box through 90°,
entry from NDE
Rotation of the connection box through 180°
Larger connection box
(1XB1631 connection box)
L01
L48
L49
L97
M50
M51
all
all
all
all
all
all
all
1LA8
1LL8
1LA8
1LL8
1PQ8
all
all
all
all
all
all
M58
all
all
Converter-fed
operation
Undrilled entry plate
6 cables protruding, 1.5 m long
6 cables protruding, 3 m long
Auxiliary connection box 1XB3020 11)
Auxiliary connection box 1XB9016 (cast-iron)
Auxiliary connection box 1XB9015
(stainless steel)
Larger connection box (1XB1621 connection
box)

9860.–

9860.–
For legends, see Page 3/16; for footnotes, see Page 3/17.
3/8
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Special versions
Options
Cast-iron series 1LA8, 1LL8, 1PQ8
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
Motor
type
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
Frame size
315
355
400
450
1780.–
–
1780.–
–
1780.–
–
3850.–
–
3850.–
–
3850.–
9340.–
–
–
–
–
–
9340.–
–
–
–
–
–
9340.–
Converter-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z
Motor connection and connection box (continued)
Flange version A660 instead of standard version M61
Motor
version
M63
all
1LA8
1LL8
1LA8
1LL8
1PQ8
all
M64
M88
N81
all
all
all
all
all
all
2580.–
1300.–
2580.– 8)
1300.–
2580.–
1300.–
2580.–
1300.–




N82
all
all




N83
N84
N85
Q00
all
all
all
all
all
all
all
all








O. R.
1370.–
O. R.
1370.–
O. R.
1370.–
O. R.
1370.–
C11
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
316.–
316.–
–
–
–
316.–
316.–
–
–
–
316.–
316.–
–
–
–
5070.–
O. R.
2780.–
O. R.
2780.–
316.–
316.–
–
–
–
316.–
316.–
–
–
–
316.–
316.–
–
–
–
6650.–
O. R.
3260.–
O. R.
3260.–
316.–
316.–
–
–
–
316.–
316.–
–
–
–
316.–
316.–
–
–
–
8330.–
O. R.
4350.–
O. R.
4350.–
316.–
316.–
–
–
–
316.–
316.–
–
–
–
316.–
316.–
–
–
–
11500.–
O. R.
5920.–
O. R.
5920.–
all
all
all
all
all
all
all
all








830.–
185.–
1010.–
211.–
1290.–
240.–
1640.–
279.–
all
all
1190.–
1430.–
1750.–
2210.–
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
–
–
6380.–
6380.–
6380.–
O. R.
–
O. R.
–
O. R.
–
–
6380.–
6380.–
6380.–
O. R.
–
O. R.
–
O. R.
–
–
6380.–
6380.–
6380.–
O. R.
–
O. R.
–
O. R.
–
–
6380.–
6380.–
6380.–
O. R.
–
O. R.
–
O. R.
10)
Mains-fed
operation
Converter-fed
operation
Larger connection box
(1XB9600 connection box) 9)
Connection box on NDE
Auxiliary connection box 1XB9014 (aluminum)
Cable entry in direction of NDE with rotation
of the terminal box console through 180°
Cable entry in direction of DE with rotation
of the terminal box console through 180°
Cable entry from the top
Rotation of the terminal box console through 180°
Connection box on NDE
PE connection without cable lug
Windings and insulation
Temperature class 155 (F), used acc. to 155 (F),
with service factor (1LA8 motors: SF 1.1 from
frame size 400 SF 1.05; 1LL8 motors: SF 1.05) 12)
Converter-fed
operation
Temperature class 155 (F), used acc. to 155 (F), C12
with increased output (1LA8 motors: 10 %,
from frame size 400 5 %; 1LL8 motors: 5 %) 12)
Mains-fed
operation
Temperature class 155 (F), used acc. to 155 (F), C13
with increased coolant temperature
(1LA8 motors: 55 °C, from frame size 400 50 °C;
1LL8 motors: 50 °C) 12)
Mains-fed
operation
Temperature class 180 (F), used acc. to 155 (F), C14
with service factor (SF 1.1) 12)
Mains-fed
operation
Converter-fed
operation
Converter-fed
operation
Converter-fed
operation
Colors and paint finish
Standard finish in RAL 7030 stone gray
Unpainted (only cast-iron parts primed)
Special finish in RAL 7030 stone gray
Standard finish in other colors
Special finish in other colors
K23
K26
Y53 • and
standard finish
RAL ….
Y54 • and
special finish
RAL ….
Special technology
Mounting of LL861900 222 rotary pulse encoder H16
with Advanced Diagnostic System
Converter-fed
operation
Mounting of brake (incl. the brake
from Stromag)
H47
Mains-fed
operation
Converter-fed
operation
3
For legends, see Page 3/16; for footnotes, see Page 3/17.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
3/9
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
10
Motor category
Motor
version
Motor
type
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
Motor
type
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
–
–
5690.–
5690.–
5690.–
–
–
5690.–
5690.–
5690.–
–
–
4330.–
4330.–
4330.–
–
–
4330.–
4330.–
4330.–
–
–
8170.–
8170.–
8630.–
–
–
7360.–
7360.–
7820.–
–
–
5980.–
5980.–
6440.–
–
–
14400.–
14400.–
14400.–
9190.–
–
9190.–
–
9190.–
–
–
–
–
–
–
–
–
–
–
Motor
version
Mains-fed
operation
Converter-fed
operation
Mounting of HOG 10 D 1024 I rotary pulse
encoder
H73
Mains-fed
operation
Converter-fed
operation
Prepared for mounting of LL 861 900 220
H78
3
Mains-fed
operation
Converter-fed
operation
Prepared for mounting of HOG 10 D 1024 I
H80
Mains-fed
operation
Converter-fed
operation
Mounting of HOG10 DN 2048 incremental
encoder
H83
Mains-fed
operation
Converter-fed
operation
Mounting of HOG11 DN 2048 incremental
encoder
H84
Mains-fed
operation
Converter-fed
operation
Mounting of LL861 incremental encoder
(2048 pulses)
H85
Mains-fed
operation
Converter-fed
operation
HOG 11 DN 1024 I rotary pulse encoder (16 mm) H88
with special anti-corrosion protection
Mains-fed
operation
Converter-fed
operation
Prepared for mounting of the holding brake SFB J06
for shaft height 315 13)
Mains-fed
operation
Converter-fed
operation
Prepared for mounting of the holding brake SFB J07
for shaft height 355 13)
Mains-fed
operation
Converter-fed
operation
Prepared for mounting of the holding brake SFB J08
for shaft height 400 13)
On
request
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
Frame size
315
355
400
450
Converter-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z
Special technology (continued)
Mounting of LL 861 900 220 rotary pulse
H70
encoder
20
Mains-fed
operation
Converter-fed
operation
–
–
5690.–
5690.–
5690.–
–
–
5690.–
5690.–
5690.–
–
–
4330.–
4330.–
4330.–
–
–
4330.–
4330.–
4330.–
–
–
8170.–
8170.–
8630.–
–
–
7360.–
7360.–
7820.–
–
–
5980.–
5980.–
6440.–
–
–
14400.–
14400.–
14400.–
–
–
–
–
–
12500.–
–
12500.–
–
12500.–
–
–
–
–
–
–
–
5690.–
5690.–
5690.–
–
–
5690.–
5690.–
5690.–
–
–
4330.–
4330.–
4330.–
–
–
4330.–
4330.–
4330.–
–
–
8170.–
8170.–
8630.–
–
–
7360.–
7360.–
7820.–
–
–
5980.–
5980.–
6440.–
–
–
14400.–
14400.–
14400.–
–
–
–
–
–
–
–
–
–
–
15300.–
–
15300.–
–
15300.–
–
–
5690.–
5690.–
5690.–
–
–
5690.–
5690.–
5690.–
–
–
4330.–
4330.–
4330.–
–
–
4330.–
4330.–
4330.–
–
–
8170.–
8170.–
8630.–
–
–
7360.–
7360.–
7820.–
–
–
5980.–
5980.–
6440.–
–
–
14400.–
14400.–
14400.–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
For legends, see Page 3/16; for footnotes, see Page 3/17.
3/10
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Special versions
Options
Cast-iron series 1LA8, 1LL8, 1PQ8
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
Motor
type
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
–
–
–
–
–
30100.–
–
30100.–
–
30100.–
31400.–
–
31400.–
–
31400.–
33200.–
–
33200.–
–
33200.–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Converter-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z
Special technology (continued)
Prepared for mounting of the holding brake SFB J09
for shaft height 450 13)
Motor
version
Mains-fed
operation
Converter-fed
operation
Mounting of the holding brake SFB 160, 1600
Nm, 230 V, Pintsch-Bubenzer 13)
J48
Mains-fed
operation
Converter-fed
operation
Mounting of the holding brake SFB 160 SH,
2100 Nm, 230 V, Pintsch-Bubenzer 13)
J49
Mains-fed
operation
Converter-fed
operation
Mounting of the holding brake SFB 160 H,
2500 Nm, 230 V, Pintsch-Bubenzer 13)
J56
Mains-fed
operation
Converter-fed
operation
Mounting of the holding brake SFB 250 SH,
3300 Nm, 230 V, Pintsch-Bubenzer 13)
J57
Mains-fed
operation
Converter-fed
operation
Mounting of the holding brake SFB 250 H,
4000 Nm, 230 V, Pintsch-Bubenzer 13)
J58
Mains-fed
operation
Converter-fed
operation
Mounting of the holding brake SFB 250 H,
4000 Nm, 400 V, Pintsch-Bubenzer 13)
J59
Mains-fed
operation
Converter-fed
operation
Mounting of the holding brake SFB 400 SH,
5200 Nm, 400 V, Pintsch-Bubenzer 13)
J66
Mains-fed
operation
Converter-fed
operation
Mounting of the holding brake SFB 400 H,
6300 Nm, 400 V, Pintsch-Bubenzer 13)
J67
Mains-fed
operation
Converter-fed
operation
Mounting of the holding brake SFB 630 SH,
8000 Nm, 400 V, Pintsch-Bubenzer 13)
J68
Mains-fed
operation
Converter-fed
operation
Mounting of the holding brake SFB 630 H,
10000 Nm, 400 V, Pintsch-Bubenzer 13)
J69
Mains-fed
operation
Converter-fed
operation
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
37600.–
–
37600.–
–
37600.–
43100.–
–
43100.–
–
43100.–
49900.–
–
49900.–
–
49900.–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
55000.–
–
55000.–
–
55000.–
60700.–
–
60700.–
–
60700.–
67100.–
–
67100.–
–
67100.–
–
–
–
–
–
–
–
–
–
–
19100.–
–
19100.–
–
19100.–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
71100.–
–
71100.–
–
71100.–
76900.–
–
76900.–
–
76900.–
91900.–
–
91900.–
–
91900.–
For legends, see Page 3/16; for footnotes, see Page 3/17.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
3/11
3
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
10
Motor category
Motor
version
Motor
type
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
Motor
type
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
–
–
9790.–
9790.–
9790.–
–
–
9660.–
9660.–
9660.–
–
–
7970.–
7970.–
–
–
–
9660.–
9660.–
9660.–
–
–
O. R.
O. R.
O. R.
–
–
13200.–
13200.–
13200.–
–
–
13200.–
13200.–
13200.–
–
–
9790.–
9790.–
9790.–
–
–
9660.–
9660.–
9660.–
–
–
7970.–
7970.–
–
–
–
9660.–
9660.–
9660.–
–
–
O. R.
O. R.
O. R.
–
–
13200.–
13200.–
13200.–
–
–
13200.–
13200.–
13200.–
–
–
9790.–
9790.–
9790.–
–
–
9660.–
9660.–
9660.–
–
–
7970.–
7970.–
–
–
–
9660.–
9660.–
9660.–
–
–
O. R.
O. R.
O. R.
–
–
13200.–
13200.–
13200.–
–
–
13200.–
13200.–
13200.–
–
–
9790.–
9790.–
9790.–
–
–
9660.–
9660.–
9660.–
–
–
7970.–
7970.–
–
–
–
9660.–
9660.–
9660.–
–
–
O. R.
O. R.
O. R.
–
–
13200.–
13200.–
13200.–
–
–
13200.–
13200.–
13200.–
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
all
2860.–
2860.–
2860.–
2860.–
–
2860.–
2860.–
2860.–
2860.–
–
6300.–
–
6300.–
–
7380.–
1240.–
–
1240.–
–
O. R.
1290.–












–
–
–












–
6600.–
–
6600.–
–
7880.–
1420.–
–
1420.–
–
O. R.
1290.–
–
8770.–
–
8770.–
–
10800.–
1920.–
–
1920.–
–
O. R.
1290.–
–
10600.–
–
10600.–
–
13100.–
2570.–
–
2570.–
–
O. R.
1290.–
Converter-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z
Special technology (continued)
Mounting of HOG 10D 1024 l with terminal
N05
box/protection against dust
Motor
version
Mains-fed
operation
Converter-fed
operation
Mounting of HOG 10D 1024 l with terminal
box/protection against dust (zero signal)
N06
Mains-fed
operation
Converter-fed
operation
3
Mounting of HOG 10D 1024 l with terminal
box/protection against humidity (zero signal)
N07
Mains-fed
operation
Converter-fed
operation
Mounting of HOG 10D 1024 l with terminal
box/protection against humidity (zero signal)
N08
Mains-fed
operation
Converter-fed
operation
Mounting a special type of rotary pulse encoder Y70 • and
encoder
designation
Mains-fed
operation
Mounting of HOG 10 DN 1024 I rotary pulse
encoder + centrifugal switch, (speed .... rpm),
terminal box protection against humidity
Y74 • and
specified
speed
.... rpm
Mains-fed
operation
Mounting of HOG 10 DN 1024 I rotary pulse
encoder + centrifugal switch, (speed .... rpm),
terminal box protection against dust
Y76 • and
specified
speed
.... rpm
Mains-fed
operation
Mechanical design and degrees of protection
Low-noise version for 2-pole motors with
K37
clockwise direction of rotation
Converter-fed
operation
Converter-fed
operation
Converter-fed
operation
Mains-fed
operation
Converter-fed
operation
Low-noise version for 2-pole motors with
counter-clockwise direction of rotation
K38
Mains-fed
operation
Converter-fed
operation
Degree of protection IP65
K50
Mains-fed
operation
Converter-fed
operation
IP56 degree of protection (non-heavy-sea)
K52
Mains-fed
operation
Converter-fed
operation
Rust-resistant screws (externally) 14)
M27
On
request
20
all
For legends, see Page 3/16; for footnotes, see Page 3/17.
3/12
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Options
Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
Motor
type
Converter-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z
Coolant temperature and site altitude
Coolant temperature -50 to +40 °C
D02
Motor
version
Mains-fed
operation
57500.–
–
57500.–
–
93100.–
13700.–
–
13700.–
–
16400.–
9580.–
–
9580.–
–
11000.–
63000.–
–
63000.–
–
98600.–
14800.–
–
14800.–
–
17500.–
9580.–
–
9580.–
–
12000.–
68400.–
–
68400.–
–
104000.–
15900.–
–
15900.–
–
19200.–
9580.–
–
9580.–
–
13100.–
73900.–
–
73900.–
–
110000.–
17500.–
–
17500.–
–
20800.–
9580.–
–
9580.–
–
14800.–
all
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
all




all
all
all
all
all
all












all
all




all
all
Mains-fed
operation
332.–
1140.–
332.–
1140.–




–
–
–
8210.–
–
8210.–
–
8210.–
8210.–
–
8210.–
–
8210.–
8210.–
–
8210.–
–
O. R.
914.–
–
–
–
8210.–
–
8210.–
–
8210.–
8210.–
–
8210.–
–
8210.–
8210.–
–
8210.–
–
O. R.
1040.–
332.–
1750.–
–
–
–
–
–
8210.–
–
8210.–
–
8210.–
8210.–
–
8210.–
–
8210.–
8210.–
–
8210.–
–
O. R.
1160.–
332.–
2170.–
–
–
–
–
–
8210.–
–
8210.–
–
8210.–
8210.–
–
8210.–
–
8210.–
8210.–
–
8210.–
–
O. R.
1360.–
Converter-fed
operation
Coolant temperature -40 to +40 °C
D03
Mains-fed
operation
Converter-fed
operation
Coolant temperature -30 to +40 °C
D04
Mains-fed
operation
Converter-fed
operation
Coolant temperature 45 °C, derating ca. 4 % 15)
D11
15)
Coolant temperature 50 °C, derating ca. 8 %
D12
Coolant temperature 55 °C, derating ca. 13 % 15) D13
Coolant temperature 60 °C, derating ca. 18 % 15) D14
Designs in accordance with standards and specifications
Motor without CE marking for export outside EEA D22
(see EU Directive 640/2009)
Electrical according to NEMA MG1-12 14)
D30
Design according to UL with "Recognition Mark" D31
China Energy Efficiency Label 16)
D34
D40
all
all
all
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
all
E88
all
all
14900.–
17800.–
20700.–
22900.–
E89
all
all
575.–
575.–
575.–
575.–
E90
all
all
6800.–
7520.–
8250.–
8970.–
Converter-fed
operation
Ex certification for Russia – only in combination
with order codes M35, M39, M72 and M73.
D35
Mains-fed
operation
Converter-fed
operation
Conformity statement in accordance with
94/9/EC (ATEX) of an independent body for
Zone 2 motors (Ex nA)
D36
IEC Ex certificate – only in combination with
order codes M72 and M73
D37
Mains-fed
operation
Converter-fed
operation
Mains-fed
operation
Converter-fed
operation
Canadian regulations (CSA)
Pump drives for sea water desalination plants
Commissioning of the classification society
by Siemens 17)
Commissioning of the classification society
by third party 17)
Pump drive for sea water desalination plants
certified according to Lloyd's Register 17)
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
Frame size
315
355
400
450
For legends, see Page 3/16; for footnotes, see Page 3/17.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
3/13
3
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
10
Motor category
Motor
version
Motor
type
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
Motor
type
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
129.–
–
O. R.
–
–
6360.–
–
O. R.
–
–
1280.–
–
–
–
–
–
–
1660.–
–
–
1280.–
–
–
–
–
–
–
O. R.
–
O. R.
129.–
–
O. R.
–
–
4200.–
–
O. R.
–
–
1430.–
–
–
–
–
–
–
1910.–
–
–
1430.–
–
–
–
–
–
–
O. R.
–
O. R.
–
–
–
–
–
–
–
–
–
–
1630.–
–
–
–
–
–
–
2120.–
–
–
1630.–
–
–
–
–
–
–
O. R.
–
O. R.
–
–
–
–
–
–
–
–
–
–
1850.–
–
–
–
–
–
–
2420.–
–
–
1850.–
–
–
–
–
–
–
O. R.
–
O. R.
all
all
537.–
537.–
537.–
537.–
all
all
11000.–
11000.–
11000.–
11000.–
all
all
19600.–
19600.–
19600.–
19600.–
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
4010.–
–
4010.–
–
4010.–
11400.–
–
11400.–
–
11400.–
8270.–
–
8270.–
–
8270.–
10200.–
–
10200.–
–
10200.–
4010.–
–
4010.–
–
4010.–
11400.–
–
11400.–
–
11400.–
8270.–
–
8270.–
–
8270.–
10200.–
–
10200.–
–
10200.–
–
–
–
–
–
11400.–
–
11400.–
–
11400.–
8270.–
–
8270.–
–
8270.–
10200.–
–
10200.–
–
10200.–
–
–
–
–
–
11400.–
–
11400.–
–
11400.–
8270.–
–
8270.–
–
8270.–
10200.–
–
10200.–
–
10200.–
Motor
version
Mains-fed
operation
Converter-fed
operation
3
VIK version (comprises Zone 2 for mains-fed
operation, without Ex nA II marking
on rating plate) 20) 22)
K30
Design for Zone 22 for non-conductive dust
(IP55), for mains-fed operation 20)
M35
Mains-fed
operation
Converter-fed
operation
Mains-fed
operation
Converter-fed
operation
Design for Zone 22 for non-conductive dust
(IP55) for converter-fed operation, with derating
M39
19) 20)
Mains-fed
operation
Converter-fed
operation
Design for Zone 2 for mains-fed operation
M72
Ex nA II T3 according to IEC/EN 60079-15 19) 20)
Mains-fed
operation
Converter-fed
operation
Design for Zone 2 for converter-fed operation,
with derating Ex nA II T3 according to
IEC/EN 60079-15 19)20)21)
M73
Mains-fed
operation
Converter-fed
operation
Bearings and lubrication
Measuring nipple for SPM shock pulse
G50
measurement for bearing inspection
H05
Shock pulse measurement, fixed sensor and
distributor box
Shock pulse measurement, complete alarm box H07
On
request
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
Frame size
315
355
400
450
Converter-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z
Design for Zones according to ATEX 18)
Ex nA II on VIK rating plate
C27
20
23)
Bearing design for increased cantilever forces
K20
27)
Converter-fed
operation
Automatic re-lubricating device
EasyMatic 24)
N30
Mains-fed
operation
Converter-fed
operation
Automatic re-lubricating device
STAR CONTROL TIME M120 25)
N31
Mains-fed
operation
Converter-fed
operation
Automatic re-lubricating device
STAR CONTROL IMPULSE L250 26)
N32
Mains-fed
operation
Converter-fed
operation
For legends, see Page 3/16; for footnotes, see Page 3/17.
3/14
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
Special versions
Options
Cast-iron series 1LA8, 1LL8, 1PQ8
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
Mains-fed
operation
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
Frame size
315
355
400
450
-Z
-Z
Motor
version
1LA8
1LL8
1LA8
1LL8
1PQ8
Motor
type
K02
L68
all
all
all
all
3450.–
246.–
4080.–
370.–
4240.–
568.–
5030.–
815.–
K16
Mains-fed
operation
831.–
831.–
831.–
831.–
–
619.–
1120.–
1120.–
1120.–
1120.–
–
707.–
1530.–
1530.–
1530.–
1530.–
–
786.–
1710.–
1710.–
1710.–
1710.–
–
1000.–
Converter-fed
operation
1PQ8. . . - . . . . .
1L . . . . . - . . . . .
Balance and vibration quantity
Vibration quantity level B
Full-key balancing
Shaft and rotor
Second standard shaft extension 28) 34)
K42
all
1LA8
1LL8
1LA8
1LL8
1PQ8
all
Y55 • and
identification
code
all
all
4850.–
4850.–
4850.–
4850.–
K35
Mains-fed
operation
1LA8
1LL8
1LA8
1LL8
1PQ8
all
all
all
all
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
6020.–
6020.–
6020.–
6020.–
–
1080.–
1080.–
2630.–
2630.–
–
6020.–
6020.–
6020.–
6020.–
–
1150.–
1150.–
3180.–
3180.–
–
6020.–
6020.–
6020.–
6020.–
–
1280.–
1280.–
3830.–
3830.–
–
6020.–
6020.–
6020.–
6020.–
–
1430.–
1430.–
4490.–
4490.–
–
Converter-fed
operation
Shaft extension with standard dimensions,
without feather keyway
Non-standard cylindrical shaft extension
Heating and ventilation
Metal external fan
Converter-fed
operation
Anti-condensation heating for 230 V
Anti-condensation heating for 115 V
Anti-condensation heating for 400 V
Anti-condensation heating for 500 V
Sheet metal fan cover
K45
K46
L08
L09
L36
all
all
all
all
Mains-fed
operation
Converter-fed
operation
Separately driven fan with non-standard voltage Y81 • and
and/or frequency 29)
identification
code
Mains-fed
operation
Converter-fed
operation
Rating plate and extra rating plates
Second rating plate, loose
Extra rating plate or rating plate with deviating
rating plate data




–
–
–
–
3




–
–
–
–
–
4730.–
–
–
–
–
–
5600.–
–
–
–
–
–
5870.–
–
–
–
–
–
6600.–
194.–
332.–
194.–
332.–
194.–
332.–
194.–
194.–
194.–
+2.2 %
+2.2 %
+2.2 %
+3.4 %
+3.4 %
+3.4 %
+4.4 %
+4.4 %
+4.4 %
+6.2 %
+6.2 %
+6.2 %
+8 %
+8 %
+8 %
+11.2 %
+11.2 %
+11.2 %
K31
all
all
194.–
Y80 • and
all
all
332.–
identification
code
Y82 • and
all
all
194.–
Extra rating plate with identification codes
identification
code
Extension of liability for defects 30) (percentage additional charge refers to the basic machine)
Extension of liability for defects by 12
Q80
all
all
+2.2 %
to 24 months
Extension of liability for defects by 18
Q81
all
all
+3.4 %
to 30 months 31)
Q82
all
all
+4.4 %
Extension of liability for defects by 24
to 36 months 31)
Q83
all
all
+6.2 %
Extension of liability for defects by 30
to 42 months 31)
Extension of liability for defects by 36
Q84
all
all
+8 %
to 48 months 32)
Q85
all
all
+11.2 %
Extension of liability for defects by 48
to 60 months 32)
For legends, see Page 3/16; for footnotes, see Page 3/17.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
3/15
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
10
Motor category
Motor
version
Motor
type
Mains-fed
operation
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
315
355
400
450
1LA8
1LL8
1LA8
1LL8
1PQ8
Frame size
315
355
400
450
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z
Packaging, safety notes, documentation and test certificates 33)
Document – Electrical data sheet
B31
Document – Order dimension drawing
B32
Document – Load characteristics
B37
Document – Production schedule:
B43
Generated once
Document – Production schedule:
B44
Updated every two weeks
B45
Document – Production schedule:
Updated monthly
F01
Standard test (routine test) with acceptance
Visual acceptance and report handover with
F03
acceptance
Temperature-rise test without acceptance
F04
Temperature-rise test with acceptance
F05
Noise measurement in no-load operation,
F28
no noise analysis, without acceptance
F29
Noise measurement in no-load operation,
no noise analysis, with acceptance
F34
Recording of current and torque curves
with torque metering shaft during starting,
without acceptance
Motor
version
1LA8
1LL8
1LA8
1LL8
1PQ8
Motor
type
all
all
all
all
all
all
all
all
1140.–
1140.–
1140.–
1140.–




1140.–
788.–
1140.–
788.–
1140.–
788.–
1140.–
788.–
all
all
3150.–
3150.–
3150.–
3150.–
all
all
1580.–
1580.–
1580.–
1580.–
all
all
all
all
6210.–
2760.–
7020.–
2760.–
7020.–
2760.–
7810.–
2760.–
all
all
all
all
all
all
15800.–
18800.–
894.–
17300.–
20300.–
894.–
17300.–
20300.–
894.–
20400.–
23400.–
894.–
all
all
1170.–
1170.–
1170.–
1170.–
Mains-fed
operation
Recording of current and torque curves
with torque metering shaft during starting,
with acceptance
F35
Mains-fed
operation
Measurement of locked-rotor torque and current,
without acceptance
F52
11800.–
11800.–
–
–
–
13400.–
13400.–
–
–
–
9760.–
9760.–
–
–
–
10400.–
10400.–
–
–
–
2650.–
11800.–
11800.–
–
–
–
13400.–
13400.–
–
–
–
9760.–
9760.–
–
–
–
10400.–
10400.–
–
–
–
2650.–
11800.–
11800.–
–
–
–
13400.–
13400.–
–
–
–
9760.–
9760.–
–
–
–
10400.–
10400.–
–
–
–
2650.–
11800.–
11800.–
–
–
–
13400.–
13400.–
–
–
–
9760.–
9760.–
–
–
–
10400.–
10400.–
–
–
–
2650.–
Converter-fed
operation
3
On
request
20
F62
all
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
1LL8
1LA8
1LL8
1PQ8
all
F63
all
all
3360.–
3360.–
3360.–
3360.–
F82
all
all
25800.–
25800.–
25800.–
25800.–
F83
all
all
27300.–
27300.–
27300.–
27300.–
F92
all
all
18700.–
18700.–
18700.–
18700.–
F93
all
all
21900.–
21900.–
21900.–
21900.–
Converter-fed
operation
Converter-fed
operation
Mains-fed
operation
Converter-fed
operation
Measurement of locked-rotor torque and current,
with acceptance
F53
Mains-fed
operation
Converter-fed
operation
Noise measurement in no-load operation,
with noise analysis, without acceptance
Noise measurement in no-load operation,
with noise analysis, with acceptance
Type test with heat run for horizontal motors,
without acceptance
Type test with heat run for horizontal motors,
without acceptance
Type test with heat run for vertical motors,
without acceptance
Type test with heat run for vertical motors,
with acceptance


standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible
For footnotes, see Page 3/17.
3/16
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Standard delivery times in working days:
10
20
Supplements to article numbers and special versions
On
request
Options
Cast-iron series 1LA8, 1LL8, 1PQ8
Ordering example:
Selection criteria
Motor type
Motor frame size/No. of poles/Speed
Rated output
Voltage and frequency
Type
Special versions
Requirement
Non-standard motor specially designed for mains-fed operation,
self-ventilated, cast-iron version, IP55 degree of protection
315/6-pole/1000 rpm
200 kW
400 VΔ/690 VY, 50 Hz
IM V1 with protective cover
Metal external fan
Extension of liability for defects by 12 to 24 months
Structure of the Article No.
1LA8■■■-■■■■■
1LA8315-6AB■■
1LA8315-6AB6■
1LA8315-6AB64
1LA8315-6AB64-Z K35
1LA8315-6AB64-Z K35+Q10
3
1)
Only for 1LA8 motors in 4-pole version, IM B3 type of construction, voltage
400 VΔ/690 VY or 500 VΔ (without special insulation) Only the following
order codes can be ordered in combination with the Standardline:
A23, A61, A72, G50, H70, H73, K09, K10, K45, K46, K57, K83, K84,
K85, L00, L97, M58 (frame size 315 only), M88, Y53.
17)
Sector solution for pump drives certified according to Lloyds Register
LR-T-3600 (Rev. 9 from August 2008), (Electric Motors higher than 100 hp)
and LR-T-3601 (Rev. 8 from August 2008), (Vertical Electric Motors higher
than 100 hp). Only combination of order codes E88 + E90 or
E89 + E90 can be ordered.
2)
Evaluation with appropriate tripping unit (see Catalog IC 10) is
recommended.
18)
Explosion-proof encoders are available on request.
19)
These motors do not have a rated voltage range stamped on the rating
plate.
20)
For 1LA8 motors, with options K30, M35, M39, M72, M73 the metal
external fan order code K35 must also be ordered.
21)
In the order, the "Speed range and torque characteristic" must be
specified in plain text. A system test is necessary for
M = constant.
22)
For 2-pole 1LA8 motors of frame size 315, the low-noise version is also
required. Order code K37 or K38 and, in addition, the metal external fan
order code K35. Note the specified output and dimensions. For 1LA8353
to 1LA8357 motors, the connection box cannot be rotated by 4 x 90°.
3)
The standard thermistors are omitted. If PTC thermistors are required as
well as KTYs or Pt100s, this must be specified in the order in plain text.
A combination of A12 and A23 or A12 and A61 is available on request for
an additional charge.
4)
Only possible in combination with the stainless steel auxiliary terminal box
(order code M51.
5)
Only possible in combination with the larger connection boxes 1XB1621 or
1XB1631 (order codes M58 or L00).
6)
For 1LA8 and 1PQ8 motors, only possible in combination with the larger
connection boxes 1XB1621 or 1XB1631 (order codes M58 or L00).
7)
Combination with the order codes M88 and M50 is not possible. The
1XB1634 connection box is rotatable by 4 x 90°. Cable entry is from NDE
or the delivery position. Dimension drawings available on request.
23)
Does not apply to explosion-proof motors.
24)
8)
Only approved for 1LA8 and 1PQ8 motors of the IM V1 type of
construction, maintenance interval 2 years.
For motors 1LA8357-2, 1LA8357-4, 1PQ8357-2 and 1PQ8357-4
connection box 1XB1631 is supplied in the standard version.
25)
9)
Only approved for 1LA8 and 1PQ8 motors of the IM B3 type of
construction, maintenance interval 1 year.
For 1LA8357-2, 1PQ8357-2, 1LA8357-4, 1PQ8357-4, 1LA8- and
1PQ8 motors frame size 400 and 450, terminal box 1XB9600 can be
ordered as the next largest connection box. For 1LA8353 to 1LA8355 and
1PQ8353 to 1PQ8355 as well as for 1LA8356-6, 1LA8357-6 and
1LA8357-8 and with 1PQ8356-6, 1PQ8357-6 and 1PQ8357-8, only
terminal box 1XB1631 can be ordered as the next largest connection box.
26)
Only approved for 1LA8 and 1PQ8 motors of the IM B3 type of
construction, maintenance interval 2 years.
27)
Not possible for 2-pole motors and motors of vertical type of construction.
28)
Please inquire in the case of 2-pole motors and motors in vertical type of
construction.
Only possible for 4-pole and 6-pole 1LA8 and 1PQ8 motors with frame
size 315 or 355 in versions IM V1 or IM B35.
29)
When ordering, specify in plain text: Voltage, frequency and circuit.
30)
Extension is only valid in the case of proper use. For long-term storage
> 6 months, a special agreement is necessary.
10)
11)
VIK version is not possible for 1LA8 motors.
12)
Utilization according to temperature class 180 (H) is not possible. All
400 V versions are available upon request only. Due to the rated current,
for frame size 400 (2-pole and 4-pole) and 450 (all numbers of poles), a
larger connection box with the type designation 1XB9600 is provided in
some cases which is part of the order code C14.
31)
Registration and declaration of the installation site.
32)
Additional condition: Simultaneous completion of a maintenance contract
subject to charge, with regular inspection.
33)
Type testing is also performed for converter-fed operation.
13)
Only possible for horizontal version IM B3 – other versions (such as type,
rated voltage, mounting position) on request.
34)
Not possible in combination with encoder mounting.
14)
For 1PQ8 motors, only possible for the main motor – not for the separately
driven fan motor.
15)
Site altitude 1000 m above sea level.
16)
For 1LA8 motors in mains-fed operation up to 315 kW.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
3/17
© Siemens AG 2015
SIMOTICS N-Compact Non-Standard Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
Notes
20
On
request
3
3/18
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
4
© Siemens AG 2015
SIMOTICS XP
1MA/1MB/1LA/1LG
Explosion-Proof Motors
4/2
4/2
4/2
4/2
4/3
4/4
4/4
4/5
4/6
4/7
4/8
4/9
4/9
4/10
4/11
4/12
4/12
4/14
4/14
Loher motors
Loher CHEMSTAR motors –
Loher three-phase industrial motors for
applications in the chemical and petrochemical sector in types of protection
Ex n, Ex e, Ex de and for safe areas
Motors for Zone 1
in type of protection Ex e
Self-ventilated motors with
Standard Efficiency IE1 –
Aluminum series 1MA7
Self-ventilated motors with
Standard Efficiency IE1 –
Cast-iron series 1MA6
Motors for Zone 2 or 21/22
in type of protection Ex n or Ex t
Self-ventilated motors with
Standard Efficiency IE1 –
Aluminum series 1MB10
Self-ventilated motors with
High Efficiency IE2 –
Aluminum series 1MB10
Self-ventilated motors with
Premium Efficiency IE3 –
Aluminum series 1MB10
Self-ventilated motors with
Standard Efficiency IE1
Aluminum series 1LA7, 1LA5
with order code for explosion protection
Self-ventilated motors with
Standard Efficiency IE1
Cast-iron series 1LA6, 1LG4
with order code for explosion protection
Self-ventilated motors with
High Efficiency IE2
Aluminum series 1LA9
with order code for explosion protection
Self-ventilated motors
NEMA Energy Efficient MG1 Table 12-11
Aluminum series 1LA9
with order code D42 and explosion
protection
Self-ventilated motors with
High Efficiency IE2
Cast-iron series 1LG6
with order code for explosion protection
Self-ventilated motors
NEMA Energy Efficient MG1 Table 12-11
Cast-iron series 1LG6
with order code D42 and explosion
protection
Motors for Zone 21
in type of protection Ex tb
Cast-iron series 1MB1511, 1MB1611
Basic Line/Performance Line
mit High Efficiency IE2
4/16
4/16
4/18
4/18
4/20
4/20
4/22
4/22
4/24
4/24
4/24
4/25
4/26
4/27
4/28
4/29
4/30
4/30
4/32
4/34
4/36
4/38
4/40
4/42
4/42
4/43
4/44
4/44
4/45
4/46
4/46
4/49
4/53
4/56
4/59
4/65
Motors for Zone 2
in type of protection Ex n
Cast-iron series 1MB1531, 1MB1631
Basic/Performance Line
with High Efficiency IE2
Motors for Zone 21
in type of protection Ex tb
Cast-iron series 1MB1513, 1MB1613
Basic/Performance Line
with Premium Efficiency IE2
Motors for Zone 22
in type of protection Ex tc
Cast-iron series 1MB1523, 1MB1623
Basic/Performance Line
with Premium Efficiency IE2
Motors for Zone 2
in type of protection Ex n
Cast-iron series 1MB1533, 1MB1633
Basic/Performance Line
with Premium Efficiency IE2
Supplements to article numbers and
special versions
Voltages
Aluminum series 1MB10
Cast-iron series 1MB15, 1MB16
Aluminum series 1MA7
Cast-iron series 1MA6
Aluminum series 1LA5, 1LA7, 1LA9
Cast-iron series 1LA6, 1LG4, 1LG6
Types of construction
Aluminum series 1MB10
Cast-iron series 1MB15, 1MB16
Aluminum series 1MA7
Cast-iron series 1MA6
Aluminum series 1LA5, 1LA7, 1LA9
Cast-iron series 1LA6, 1LG4, 1LG6
Motor protection
Aluminum series 1MB10
Cast-iron series 1MB15, 1MB16
Connection box position
Aluminum series 1MB10
Cast-iron series 1MB15, 1MB16
Options
Aluminum series 1MB10
Cast-iron series 1MB15, 1MB16
Aluminum series 1MA7
Cast-iron series 1MA6
Aluminum series 1LA7, 1LA5, 1LA9
Cast-iron series 1LA6, 1LG4, 1LG6
Motors for Zone 22
in type of protection Ex tc
Cast-iron series 1MB1521, 1MB1621
Basic/Performance Line
with High Efficiency IE2
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Loher and SIMOTICS XP 1MA Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview
Category
Loher motors
Motors for Zone 1
in type of protection Ex e
Series version
4
Loher CHEMSTAR motors
Aluminum series 1MA7
Types 1PS1, 1PS2 and 1PS5
with Standard Efficiency IE1
Cooling
Self-ventilated (IC 411) or forced-air cooled (IC 416)
Self-ventilated (IC 411)
Degree of protection
IP56 ... IP66
IP55, optionally IP56 or IP65
Insulation
Standard: Thermal class 155 (F)
Thermal class 155 (F)
Utilization
Standard: Thermal class 130 (B)
Thermal class 130 (B)
Number of poles
2, 4, 6
2, 4, 6
Frame sizes (FS)
71 ... 355 (range for standard motors)
63 M ... 160 L
Rated output at 50 Hz
to 315 kW
0.12 ... 16 kW
Synchronous speed
1000 ... 3600 rpm
1000 ... 3000 rpm
Rated torque at 50 Hz
More information: www.siemens.com/lowvoltagemotors
0.61 ... 96 Nm
Efficiency
Standard: High Efficiency IE2
Standard Efficiency IE1
Metal factor for metal surcharges (MS) More information: www.siemens.com/lowvoltagemotors
N-W----Price group (PG)
More information: www.siemens.com/lowvoltagemotors
3Z4
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, TemFrame
Article No.
Base
price
Loher – the leading expert in
50 Hz perature size
classes
explosion-proof motors
kW
FS
EUR
Loher, with headquarters in Ruhstorf near
2-pole: 3000 rpm at 50 Hz
Passau in Germany, assumed a leading role 0.18 T1-T3
63 M
1MA7060-2BA..
378.–
in explosion-proof drives as early as the
0.25 T1-T3
63 M
1MA7063-2BA..
391.–
1960's, becoming in the meantime a center 0.37 T1-T3
71 M
1MA7070-2BA..
402.–
of expertise of international renown, con0.55 T1-T3
71 M
1MA7073-2BA..
451.–
stantly developing its leading position.
0.75 T1-T3
80 M
1MA7080-2BA..
468.–
1.1
T1-T3
80 M
1MA7083-2BA..
537.–
By satisfying all the requirements of the
1.3
T1-T3
90 S
1MA7090-2BA..
575.–
industry and due to its decades of experi90 L
1MA7096-2BA..
725.–
ence, Loher sets the standard in drive tech- 1.85 T1-T3
T1-T3
100 L
1MA7106-2BA..
879.–
nology in chemicals and petrochemicals as 2.5
T1-T3
112 M
1MA7113-2BB..
1070.–
well as in oil and gas with the motor series – 3.3
4.6
T1-T3
132 S
1MA7130-2BB..
1370.–
Loher CHEMSTAR and Loher VARIO.
5.5
T3
132 S
1MA7131-2BB..
1740.–
Decades of experience in development,
6.5
T1-T2
132 S
1MA7131-2BB..
1740.–
engineering, design and production of ex7.5
T3
160 M
1MA7163-2BB..
2400.–
plosion- proof motors guarantees optimum
9.5
T1-T2
160 M
1MA7163-2BB..
2400.–
operational safety, availability and adapta10
T3
160 M
1MA7164-2BB..
3130.–
tion to the prevailing operating conditions.
13
T1-T2
160 M
1MA7164-2BB..
3130.–
The motors are not only extremely rugged
12.5 T3
160 L
1MA7166-2BB..
3740.–
and reliable, but they can also be supplied
16
T1-T2
160 L
1MA7166-2BB..
3740.–
in every type of protection, Ex n, Ex e and
4-pole: 1500 rpm at 50 Hz
Ex d; and for extreme requirements they can 0.12 T1-T3
63 M
1MA7060-4BB..
366.–
even be supplied with dual protection
0.18 T1-T3
63 M
1MA7063-4BB..
388.–
against gas and dust or Ex e and Ex d.
0.25 T1-T3
71 M
1MA7070-4BB..
385.–
0.37 T1-T3
71 M
1MA7073-4BB..
430.–
Application-specific special versions are
0.55 T1-T3
80 M
1MA7080-4BA..
451.–
also available on request.
0.75 T1-T3
80 M
1MA7083-4BA..
503.–
More information:
1
T1-T3
90 S
1MA7090-4BA..
545.–
www.siemens.com/lowvoltagemotors
1.35 T1-T3
90 L
1MA7096-4BA..
631.–
2
T1-T3
100 L
1MA7106-4BA..
768.–
2.5
T1-T3
100 L
1MA7107-4BA..
901.–
3.6
T1-T3
112 M
1MA7113-4BA..
1130.–
5
T1-T3
132 S
1MA7130-4BA..
1420.–
6.8
T1-T3
132 M
1MA7133-4BA..
1830.–
10
T1-T3
160 M
1MA7163-4BB..
2460.–
13.5 T1-T3
160 L
1MA7166-4BB..
3170.–
6-pole: 1000 rpm at 50 Hz
0.25 T1-T3
71 M
1MA7073-6BA..
465.–
0.37 T1-T3
80 M
1MA7080-6BA..
483.–
0.55 T1-T3
80 M
1MA7083-6BA..
549.–
0.65 T1-T3
90 S
1MA7090-6BA..
566.–
0.95 T1-T3
90 L
1MA7096-6BA..
684.–
1.3
T1-T3
100 L
1MA7106-6BA..
820.–
1.9
T1-T3
112 M
1MA7113-6BB..
1030.–
2.6
T1-T3
132 S
1MA7130-6BB..
1340.–
3.5
T1-T3
132 M
1MA7133-6BB..
1590.–
4.8
T1-T3
132 M
1MA7134-6BB..
2030.–
6.6
T1-T3
160 M
1MA7163-6BB..
2630.–
9.7
T1-T3
160 L
1MA7166-6BB..
3600.–
4/2
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 1
in type of protection Ex e (continued)
Series version
Cast-iron series 1MA6
with Standard Efficiency IE1
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
1.3 ... 165 kW
Synchronous speed
1000 ... 3000 rpm
Rated torque at 50 Hz
8.3 ... 1300 Nm
Efficiency
Standard Efficiency IE1
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z4
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, TemFrame
Article No.
Base
Prated, TemFrame
Article No.
Base
price
price
50 Hz perature size
50 Hz perature size
classes
classes
kW
FS
EUR
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
4-pole: 1500 rpm at 50 Hz (continued)
2.5
T1-T3
100 L
1MA6106-2BA..
1020.– 30
T3
225 S
1MA6220-4BC..
7390.–
3.3
T1-T3
112 M
1MA6113-2BB..
1230.– 33
T1, T2
225 S
1MA6220-4BC..
7390.–
4.6
T1-T3
132 S
1MA6130-2BB..
1530.– 36
T3
225 M
1MA6223-4BC..
9020.–
5.5
T3
132 S
1MA6131-2BB..
1930.– 40
T1, T2
225 M
1MA6223-4BC..
9020.–
6.5
T1-T2
132 S
1MA6131-2BB..
1930.– 44
T3
250 M
1MA6253-4BC..
10700.–
7.5
T3
160 M
1MA6163-2BB..
2670.– 50
T1, T2
250 M
1MA6253-4BC..
10700.–
9.5
T1-T2
160 M
1MA6163-2BB..
2670.– 58
T3
280 S
1MA6280-4BC..
14900.–
10
T3
160 M
1MA6164-2BB..
3470.– 68
T1, T2
280 S
1MA6280-4BC..
14900.–
13
T1-T2
160 M
1MA6164-2BB..
3470.– 70
T3
280 M
1MA6283-4BC..
17700.–
12.5 T3
160 L
1MA6166-2BB..
4120.– 80
T1, T2
280 M
1MA6283-4BC..
17700.–
16
T1-T2
160 L
1MA6166-2BB..
4120.– 84
T3
315 S
1MA6310-4BD..
21500.–
15
T3
180 M
1MA6183-2BC..
4520.– 100
T1, T2
315 S
1MA6310-4BD..
21500.–
19
T1, T2
180 M
1MA6183-2BC..
4520.– 100
T3
315 M
1MA6313-4BD..
26700.–
20
T3
200 L
1MA6206-2BC..
5840.– 120
T1, T2
315 M
1MA6313-4BD..
26700.–
25
T1, T2
200 L
1MA6206-2BC..
5840.– 115
T3
315 L
1MA6316-4BD..
29700.–
24
T3
200 L
1MA6207-2BC..
7500.– 135
T1, T2
315 L
1MA6316-4BD..
29700.–
31
T1, T2
200 L
1MA6207-2BC..
7500.– 135
T3
315 L
1MA6317-4BD..
36800.–
28
T3
225 M
1MA6223-2BC..
9260.– 165
T1, T2
315 L
1MA6317-4BD..
36800.–
38
T1, T2
225 M
1MA6223-2AC..
9260.– 6-pole: 1000 rpm at 50 Hz
36
T3
250 M
1MA6253-2BC..
11300.– 1.3
T1-T3
100 L
1MA6106-6BA..
956.–
47
T1, T2
250 M
1MA6253-2AC..
11300.– 1.9
T1-T3
112 M
1MA6113-6BB..
1210.–
47
T3
280 S
1MA6280-2BD..
15100.– 2.6
T1-T3
132 S
1MA6130-6BB..
1490.–
64
T1, T2
280 S
1MA6280-2AD..
15100.– 3.5
T1-T3
132 M
1MA6133-6BB..
1800.–
58
T3
280 M
1MA6283-2BD..
18700.– 4.8
T1-T3
132 M
1MA6134-6BB..
2310.–
76
T1, T2
280 M
1MA6283-2AD..
18700.– 6.6
T1-T3
160 M
1MA6163-6BB..
2890.–
68
T3
315 S
1MA6310-2BD..
22800.– 9.7
T1-T3
160 L
1MA6166-6BB..
3960.–
95
T1, T2
315 S
1MA6310-2AD..
22800.– 13.2 T1-T3
180 L
1MA6186-6BC..
4790.–
80
T3
315 M
1MA6313-2BD..
28600.– 16.5 T1-T3
200 L
1MA6206-6BC..
5780.–
112
T1, T2
315 M
1MA6313-2AD..
28600.– 20
T1-T3
200 L
1MA6207-6BC..
6910.–
100
T3
315 L
1MA6316-2BD..
33600.– 27
T1-T3
225 M
1MA6223-6BC..
9280.–
135
T1, T2
315 L
1MA6316-2AD..
33600.– 33
T1-T3
250 M
1MA6253-6BC..
11600.–
125
T3
315 L
1MA6317-2BD..
41200.– 40
T1-T3
280 S
1MA6280-6BC..
13700.–
165
T1, T2
315 L
1MA6317-2AD..
41200.– 46
T3
280 M
1MA6283-6BC..
16600.–
4-pole: 1500 rpm at 50 Hz
50
T1, T2
280 M
1MA6283-6BC..
16600.–
2
T1-T3
100 L
1MA6106-4BA..
888.– 64
T3
315 S
1MA6310-6BC..
22800.–
2.5
T1-T3
100 L
1MA6107-4BA..
1040.– 68
T1, T2
315 S
1MA6310-6BC..
22800.–
3.6
T1-T3
112 M
1MA6113-4BA..
1320.– 76
T3
315 M
1MA6313-6BC..
28400.–
5
T1-T3
132 S
1MA6130-4BA..
1610.– 82
T1, T2
315 M
1MA6313-6BC..
28400.–
6.8
T1-T3
132 M
1MA6133-4BA..
2070.– 92
T3
315 L
1MA6316-6BC..
33900.–
10
T1-T3
160 M
1MA6163-4BB..
2720.– 98
T1, T2
315 L
1MA6316-6BC..
33900.–
13.5 T1-T3
160 L
1MA6166-4BB..
3520.– 110
T3
315 L
1MA6317-6BC..
42300.–
15
T3
180 M
1MA6183-4BC..
3950.– 120
T1, T2
315 L
1MA6317-6BC..
42300.–
17
T1, T2
180 M
1MA6183-4BC..
3950.– 125
T3
315 L
1MA6318-6BC..
47200.–
17.5 T3
180 L
1MA6186-4BC..
4590.– 135
T1, T2
315 L
1MA6318-6BC..
47200.–
20
T1, T2
180 L
1MA6186-4BC..
4590.–
24
T3
200 L
1MA6207-4BC..
6120.–
27
T1, T2
200 L
1MA6207-4BC..
6120.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/3
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for Zone 2 or 21/22 in type of protection Ex n or Ex t
Series version
Aluminum series 1MB10
with Standard Efficiency IE1
Self-ventilated (IC 411)
IP55, optionally IP56 or IP65
Thermal class 155 (F)
Thermal class 130 (B)
2, 4, 6, 8
100 L ... 160 L
0.75 … 18.5 kW
750 ... 3600 rpm
10 ... 109 Nm
Standard Efficiency IE1
N-W-----
Cooling
Degree of protection
Insulation
Utilization
Number of poles
Frame sizes (FS)
Rated output at 50 Hz
Synchronous speed at 60 Hz
Rated torque at 50 Hz
Efficiency
Metal factor for metal
surcharges (MS)
Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Article No.
Base
Article No.
Base
Ex tb (Zone 21)
price
Ex tc (Zone 22)
price
Ex n (Zone 2)
price
50 Hz class size
kW
FS
 New
EUR
 New
EUR
 New
EUR
2-pole: 3000 rpm at 50 Hz
3
IE1
100 L
1MB1012-1AA4.-....
916.–
1MB1022-1AA4.-....
807.–
1MB1032-1AA4.-....
866.–
4
IE1
112 M
1MB1012-1BA2.-.... 1110.–
1MB1022-1BA2.-....
988.–
1MB1032-1BA2.-.... 1060.–
5.5
IE1
132 S
1MB1012-1CA0.-.... 1410.–
1MB1022-1CA0.-.... 1290.–
1MB1032-1CA0.-.... 1360.–
7.5
IE1
132 S
1MB1012-1CA1.-.... 1730.–
1MB1022-1CA1.-.... 1610.–
1MB1032-1CA1.-.... 1680.–
11
IE1
160 M
1MB1012-1DA2.-.... 2400.–
1MB1022-1DA2.-.... 2260.–
1MB1032-1DA2.-.... 2320.–
15
IE1
160 M
1MB1012-1DA3.-.... 3000.–
1MB1022-1DA3.-.... 2860.–
1MB1032-1DA3.-.... 2920.–
18.5 IE1
160 L
1MB1012-1DA4.-.... 3510.–
1MB1022-1DA4.-.... 3370.–
1MB1032-1DA4.-.... 3430.–
4-pole: 1500 rpm at 50 Hz
2.2
IE1
100 L
1MB1012-1AB4.-....
831.–
1MB1022-1AB4.-....
722.–
1MB1032-1AB4.-....
781.–
3
IE1
100 L
1MB1012-1AB5.-....
924.–
1MB1022-1AB5.-....
815.–
1MB1032-1AB5.-....
874.–
4
IE1
112 M
1MB1012-1BB2.-.... 1150.–
1MB1022-1BB2.-.... 1030.–
1MB1032-1BB2.-.... 1100.–
5.5
IE1
132 S
1MB1012-1CB0.-.... 1460.–
1MB1022-1CB0.-.... 1340.–
1MB1032-1CB0.-.... 1410.–
7.5
IE1
132 M
1MB1012-1CB2.-.... 1790.–
1MB1022-1CB2.-.... 1670.–
1MB1032-1CB2.-.... 1740.–
11
IE1
160 M
1MB1012-1DB2.-.... 2440.–
1MB1022-1DB2.-.... 2300.–
1MB1032-1DB2.-.... 2360.–
15
IE1
160 L
1MB1012-1DB4.-.... 3050.–
1MB1022-1DB4.-.... 2910.–
1MB1032-1DB4.-.... 2970.–
6-pole: 1000 rpm at 50 Hz
1.5
IE1
100 L
1MB1012-1AC4.-....
871.–
1MB1022-1AC4.-....
762.–
1MB1032-1AC4.-....
821.–
2.2
IE1
112 M
1MB1012-1BC2.-.... 1070.–
1MB1022-1BC2.-....
946.–
1MB1032-1BC2.-.... 1020.–
3
IE1
132 S
1MB1012-1CC0.-.... 1340.–
1MB1022-1CC0.-.... 1220.–
1MB1032-1CC0.-.... 1290.–
4
IE1
132 M
1MB1012-1CC2.-.... 1600.–
1MB1022-1CC2.-.... 1480.–
1MB1032-1CC2.-.... 1550.–
5.5
IE1
132 M
1MB1012-1CC3.-.... 1940.–
1MB1022-1CC3.-.... 1820.–
1MB1032-1CC3.-.... 1890.–
7.5
IE1
160 M
1MB1012-1DC2.-.... 2540.–
1MB1022-1DC2.-.... 2400.–
1MB1032-1DC2.-.... 2460.–
11
IE1
160 L
1MB1012-1DC4.-.... 3360.–
1MB1022-1DC4.-.... 3220.–
1MB1032-1DC4.-.... 3280.–
8-pole: 750 rpm at 50 Hz
0.75 –
100 L
1MB1012-1AD4.-....
897.–
1MB1022-1AD4.-....
788.–
1MB1032-1AD4.-....
847.–
1.1
–
100 L
1MB1012-1AD5.-.... 1080.–
1MB1022-1AD5.-....
970.–
1MB1032-1AD5.-.... 1030.–
1.5
–
112 M
1MB1012-1BD2.-.... 1270.–
1MB1022-1BD2.-.... 1150.–
1MB1032-1BD2.-.... 1220.–
2.2
–
132 S
1MB1012-1CD0.-.... 1630.–
1MB1022-1CD0.-.... 1510.–
1MB1032-1CD0.-.... 1580.–
3
–
132 M
1MB1012-1CD2.-.... 1920.–
1MB1022-1CD2.-.... 1800.–
1MB1032-1CD2.-.... 1870.–
4
–
160 M
1MB1012-1DD2.-.... 2400.–
1MB1022-1DD2.-.... 2260.–
1MB1032-1DD2.-.... 2320.–
5.5
–
160 M
1MB1012-1DD3.-.... 2880.–
1MB1022-1DD3.-.... 2740.–
1MB1032-1DD3.-.... 2800.–
7.5
–
160 L
1MB1012-1DD4.-.... 3460.–
1MB1022-1DD4.-.... 3320.–
1MB1032-1DD4.-.... 3380.–
4
4/4
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 2 or 21/22 in type of protection Ex n or Ex t (continued)
Series version
Aluminum series 1MB10
with High Efficiency IE2
Self-ventilated (IC 411)
IP55, optionally IP56 or IP65
Thermal class 155 (F)
Thermal class 130 (B)
2, 4, 6, 8
80 L ... 160 L
0.37 … 18.5 kW
750 ... 3600 rpm
2.6 ... 109 Nm
High Efficiency IE2
N-W-----
Cooling
Degree of protection
Insulation
Utilization
Number of poles
Frame sizes (FS)
Rated output at 50 Hz
Synchronous speed at 60 Hz
Rated torque at 50 Hz
Efficiency
Metal factor for metal
surcharges (MS)
Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Article No.
Base
Article No.
Base
Ex tb (Zone 21)
price
Ex tc (Zone 22)
price
Ex n (Zone 2)
price
50 Hz class size
kW
FS
 New
EUR
2-pole: 3000 rpm at 50 Hz
0.75 IE2
80 M
 1MB1011-0DA2.-....
638.–
1.1
IE2
80 M
 1MB1011-0DA3.-....
705.–
1.5
IE2
90 S
 1MB1011-0EA0.-....
808.–
2.2
IE2
90 L
 1MB1011-0EA4.-....
986.–
3
IE2
100 L
1MB1011-1AA4.-.... 1160.–
4
IE2
112 M
1MB1011-1BA2.-.... 1360.–
5.5
IE2
132 S
1MB1011-1CA0.-.... 1710.–
7.5
IE2
132 S
1MB1011-1CA1.-.... 2090.–
11
IE2
160 M
1MB1011-1DA2.-.... 2890.–
15
IE2
160 M
1MB1011-1DA3.-.... 3650.–
18.5 IE2
160 L
1MB1011-1DA4.-.... 4280.–
4-pole: 1500 rpm at 50 Hz
0.55 –
80 M
 1MB1011-0DB2.-....
635.–
0.75 IE2
80 M
 1MB1011-0DB3.-....
677.–
1.1
IE2
90 S
 1MB1011-0EB0.-....
790.–
1.5
IE2
90 L
 1MB1011-0EB4.-....
901.–
2.2
IE2
100 L
1MB1011-1AB4.-.... 1080.–
3
IE2
100 L
1MB1011-1AB5.-.... 1210.–
4
IE2
112 M
1MB1011-1BB2.-.... 1460.–
5.5
IE2
132 S
1MB1011-1CB0.-.... 1820.–
7.5
IE2
132 M
1MB1011-1CB2.-.... 2230.–
11
IE2
160 M
1MB1011-1DB2.-.... 2950.–
15
IE2
160 L
1MB1011-1DB4.-.... 3700.–
6-pole: 1000 rpm at 50 Hz
0.37 –
80 M
 1MB1011-0DC2.-....
620.0.55 –
80 M
 1MB1011-0DC3.-....
690.0.75 IE2
90 S
 1MB1011-0EC0.-....
779.1.1
IE2
90 L
 1MB1011-0EC4.-....
918.1.5
IE2
100 L
1MB1011-1AC4.-.... 1070.–
2.2
IE2
112 M
1MB1011-1BC2.-.... 1320.–
3
IE2
132 S
1MB1011-1CC0.-.... 1660.–
4
IE2
132 M
1MB1011-1CC2.-.... 1970.–
5.5
IE2
132 M
1MB1011-1CC3.-.... 2410.–
7.5
IE2
160 M
1MB1011-1DC2.-.... 3080.–
11
IE2
160 L
1MB1011-1DC4.-.... 4090.–
8-pole: 750 rpm at 50 Hz
0.75 –
100 L
1MB1011-1AD4.-.... 1170.–
1.1
–
100 L
1MB1011-1AD5.-.... 1420.–
1.5
–
112 M
1MB1011-1BD2.-.... 1680.–
2.2
–
132 S
1MB1011-1CD0.-.... 2160.–
3
–
132 M
1MB1011-1CD2.-.... 2570.–
4
–
160 M
1MB1011-1DD2.-.... 3190.–
5.5
–
160 M
1MB1011-1DD3.-.... 3820.–
7.5
–
160 L
1MB1011-1DD4.-.... 4520.–
Recommended retail prices plus metal surcharges (MS)
 New
EUR
 New
EUR




1MB1021-0DA2.-....
1MB1021-0DA3.-....
1MB1021-0EA0.-....
1MB1021-0EA4.-....
1MB1021-1AA4.-....
1MB1021-1BA2.-....
1MB1021-1CA0.-....
1MB1021-1CA1.-....
1MB1021-1DA2.-....
1MB1021-1DA3.-....
1MB1021-1DA4.-....
541.–
607.–
705.–
882.–
1050.–
1240.–
1590.–
1970.–
2750.–
3510.–
4140.–




1MB1031-0DA2.-....
1MB1031-0DA3.-....
1MB1031-0EA0.-....
1MB1031-0EA4.-....
1MB1031-1AA4.-....
1MB1031-1BA2.-....
1MB1031-1CA0.-....
1MB1031-1CA1.-....
1MB1031-1DA2.-....
1MB1031-1DA3.-....
1MB1031-1DA4.-....
587.–
654.–
749.–
927.–
1110.–
1310.–
1660.–
2040.–
2810.–
3570.–
4200.–




1MB1021-0DB2.-....
1MB1021-0DB3.-....
1MB1021-0EB0.-....
1MB1021-0EB4.-....
1MB1021-1AB4.-....
1MB1021-1AB5.-....
1MB1021-1BB2.-....
1MB1021-1CB0.-....
1MB1021-1CB2.-....
1MB1021-1DB2.-....
1MB1021-1DB4.-....
538.–
580.–
687.–
798.–
969.–
1100.–
1340.–
1700.–
2110.–
2810.–
3560.–




1MB1031-0DB2.-....
1MB1031-0DB3.-....
1MB1031-0EB0.-....
1MB1031-0EB4.-....
1MB1031-1AB4.-....
1MB1031-1AB5.-....
1MB1031-1BB2.-....
1MB1031-1CB0.-....
1MB1031-1CB2.-....
1MB1031-1DB2.-....
1MB1031-1DB4.-....
584.–
626.–
731.–
842.–
1030.–
1160.–
1410.–
1770.–
2180.–
2870.–
3620.–




1MB1021-0DC2.-....
1MB1021-0DC3.-....
1MB1021-0EC0.-....
1MB1021-0EC4.-....
1MB1021-1AC4.-....
1MB1021-1BC2.-....
1MB1021-1CC0.-....
1MB1021-1CC2.-....
1MB1021-1CC3.-....
1MB1021-1DC2.-....
1MB1021-1DC4.-....
522.–
593.–
675.–
815.–
959.–
1200.–
1540.–
1850.–
2290.–
2940.–
3950.–




1MB1031-0DC2.-....
1MB1031-0DC3.-....
1MB1031-0EC0.-....
1MB1031-0EC4.-....
1MB1031-1AC4.-....
1MB1031-1BC2.-....
1MB1031-1CC0.-....
1MB1031-1CC2.-....
1MB1031-1CC3.-....
1MB1031-1DC2.-....
1MB1031-1DC4.-....
569.–
639.–
720.–
859.–
1020.–
1270.–
1610.–
1920.–
2360.–
3000.–
4010.–
1MB1021-1AD4.-....
1MB1021-1AD5.-....
1MB1021-1BD2.-....
1MB1021-1CD0.-....
1MB1021-1CD2.-....
1MB1021-1DD2.-....
1MB1021-1DD3.-....
1MB1021-1DD4.-....
1060.–
1310.–
1560.–
2040.–
2450.–
3050.–
3680.–
4380.–
1MB1031-1AD4.-....
1MB1031-1AD5.-....
1MB1031-1BD2.-....
1MB1031-1CD0.-....
1MB1031-1CD2.-....
1MB1031-1DD2.-....
1MB1031-1DD3.-....
1MB1031-1DD4.-....
1120.–
1370.–
1630.–
2110.–
2520.–
3110.–
3740.–
4440.–
Siemens D 81.1 P · 03/2015
4/5
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for Zone 2 or 21/22 in type of protection Ex n or Ex t (continued)
Series version
Aluminum series 1MB10
with Premium Efficiency IE3
Self-ventilated (IC 411)
IP55, optionally IP56 or IP65
Thermal class 155 (F)
Thermal class 130 (B)
2, 4, 6
80 L ... 160 L
0.43 … 18.5 kW
750 ... 3600 rpm
2.5 ... 109 Nm
Premium Efficiency IE3
N-W-----
Cooling
Degree of protection
Insulation
Utilization
Number of poles
Frame sizes (FS)
Rated output at 50 Hz
Synchronous speed at 60 Hz
Rated torque at 50 Hz
Efficiency
Metal factor for metal
surcharges (MS)
Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Article No.
Base
Article No.
Base
Ex tb (Zone 21)
price
Ex tc (Zone 22)
price
Ex n (Zone 2)
price
50 Hz class size
kW
FS
 New
EUR
2-pole: 3000 rpm at 50 Hz
0.75 IE3
80 M
 1MB1013-0DA2.-....
725.–
1.1
IE3
80 M
 1MB1013-0DA3.-....
804.–
1.5
IE3
90 S
 1MB1013-0EA0.-....
924.–
2.2
IE3
90 L
 1MB1013-0EA4.-.... 1130.–
3
IE3
100 L
1MB1013-1AA4.-.... 1270.–
4
IE3
112 M
1MB1013-1BA2.-.... 1500.–
5.5
IE3
132 S
1MB1013-1CA0.-.... 1880.–
7.5
IE3
132 S
1MB1013-1CA1.-.... 2300.–
11
IE3
160 M
1MB1013-1DA2.-.... 3190.–
15
IE3
160 M
1MB1013-1DA3.-.... 4060.–
18.5 IE3
160 L
1MB1013-1DA4.-.... 4760.–
4-pole: 1500 rpm at 50 Hz
0.55 –
80 M
 1MB1013-0DB2.-....
720.–
0.75 IE3
80 M
 1MB1013-0DB3.-....
771.–
1.1
IE3
90 S
 1MB1013-0EB0.-....
901.–
1.5
IE3
90 L
 1MB1013-0EB4.-.... 1040.–
2.2
IE3
100 L
1MB1013-1AB4.-.... 1190.–
3
IE3
100 L
1MB1013-1AB5.-.... 1330.–
4
IE3
112 M
1MB1013-1BB2.-.... 1610.–
5.5
IE3
132 S
1MB1013-1CB0.-.... 2000.–
7.5
IE3
132 M
1MB1013-1CB2.-.... 2470.–
11
IE3
160 M
1MB1013-1DB2.-.... 3260.–
15
IE3
160 L
1MB1013-1DB4.-.... 4110.–
6-pole: 1000 rpm at 50 Hz
0.37 –
80 M
 1MB1013-0DC2.-....
703.–
0.55 –
80 M
 1MB1013-0DC3.-....
786.–
0.75 IE3
90 S
 1MB1013-0EC0.-....
888.–
1.1
IE3
90 L
 1MB1013-0EC4.-.... 1060.–
1.5
IE3
100 L  1MB1013-1AC4.-.... 1180.–
2.2
IE3
112 M  1MB1013-1BC2.-.... 1450.–
3
IE3
132 S
1MB1013-1CC0.-.... 1820.–
4
IE3
132 M
1MB1013-1CC2.-.... 2180.–
5.5
IE3
132 M
1MB1013-1CC3.-.... 2670.–
7.5
IE3
160 M
1MB1013-1DC2.-.... 3410.–
11
IE3
160 L
1MB1013-1DC4.-.... 4550.–
4
4/6
Siemens D 81.1 P · 03/2015
 New
EUR
 New
EUR




1MB1023-0DA2.-....
1MB1023-0DA3.-....
1MB1023-0EA0.-....
1MB1023-0EA4.-....
1MB1023-1AA4.-....
1MB1023-1BA2.-....
1MB1023-1CA0.-....
1MB1023-1CA1.-....
1MB1023-1DA2.-....
1MB1023-1DA3.-....
1MB1023-1DA4.-....
631.–
711.–
825.–
1040.–
1180.–
1380.–
1760.–
2200.–
3060.–
3910.–
4630.–




1MB1033-0DA2.-....
1MB1033-0DA3.-....
1MB1033-0EA0.-....
1MB1033-0EA4.-....
1MB1033-1AA4.-....
1MB1033-1BA2.-....
1MB1033-1CA0.-....
1MB1033-1CA1.-....
1MB1033-1DA2.-....
1MB1033-1DA3.-....
1MB1033-1DA4.-....
676.–
756.–
867.–
1080.–
1230.–
1450.–
1830.–
2250.–
3120.–
3970.–
4680.–




1MB1023-0DB2.-....
1MB1023-0DB3.-....
1MB1023-0EB0.-....
1MB1023-0EB4.-....
1MB1023-1AB4.-....
1MB1023-1AB5.-....
1MB1023-1BB2.-....
1MB1023-1CB0.-....
1MB1023-1CB2.-....
1MB1023-1DB2.-....
1MB1023-1DB4.-....
626.–
677.–
802.–
935.–
1080.–
1230.–
1500.–
1890.–
2350.–
3130.–
3970.–




1MB1033-0DB2.-....
1MB1033-0DB3.-....
1MB1033-0EB0.-....
1MB1033-0EB4.-....
1MB1033-1AB4.-....
1MB1033-1AB5.-....
1MB1033-1BB2.-....
1MB1033-1CB0.-....
1MB1033-1CB2.-....
1MB1033-1DB2.-....
1MB1033-1DB4.-....
671.–
722.–
845.–
979.–
1140.–
1280.–
1570.–
1950.–
2410.–
3190.–
4030.–






1MB1023-0DC2.-....
1MB1023-0DC3.-....
1MB1023-0EC0.-....
1MB1023-0EC4.-....
1MB1023-1AC4.-....
1MB1023-1BC2.-....
1MB1023-1CC0.-....
1MB1023-1CC2.-....
1MB1023-1CC3.-....
1MB1023-1DC2.-....
1MB1023-1DC4.-....
610.–
692.–
788.–
955.–
1070.–
1330.–
1720.–
2060.–
2560.–
3270.–
4410.–






1MB1033-0DC2.-....
1MB1033-0DC3.-....
1MB1033-0EC0.-....
1MB1033-0EC4.-....
1MB1033-0EC0.-....
1MB1033-0EC4.-....
1MB1033-1CC0.-....
1MB1033-1CC2.-....
1MB1033-1CC3.-....
1MB1033-1DC2.-....
1MB1033-1DC4.-....
654.–
737.–
831.–
998.–
1130.1410.1770.–
2130.–
2620.–
3330.–
4470.–
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Standard delivery times in working days:
10
20
On
request
Orientation
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 2 or 21/22 in type of protection Ex n or Ex t (continued)
Series version
Aluminum series 1LA7, 1LA5 with order code for explosion protection
with Standard Efficiency IE1
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
63 M ... 225 M
Rated output at 50 Hz
0.09 ... 45 kW
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
0.61 ... 293 Nm
Efficiency
Standard Efficiency IE1
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame Article No.
Base
Prated, IE
Frame Article No.
Base
class
size
with order code
price
class
size
with order code
price
50 Hz
50 Hz
for explosion
for explosion
protection
protection
kW
FS
EUR
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
6-pole: 1000 rpm at 50 Hz
0.18
–
63 M
1LA7060-2AA..-Z
269.–
0.09
–
63 M
1LA7063-6AB..-Z
286.–
0.25
–
63 M
1LA7063-2AA..-Z
285.–
0.18
–
71 M
1LA7070-6AA..-Z
303.–
0.37
–
71 M
1LA7070-2AA..-Z
289.–
0.25
–
71 M
1LA7073-6AA..-Z
338.–
0.55
–
71 M
1LA7073-2AA..-Z
324.–
0.37
–
80 M
1LA7080-6AA..-Z
357.–
0.75
IE1
80 M
1LA7080-2AA..-Z
357.–
0.55
–
80 M
1LA7083-6AA..-Z
413.–
1.1
IE1
80 M
1LA7083-2AA..-Z
410.–
0.75
IE1
90 S
1LA7090-6AA..-Z
467.–
1.5
IE1
90 S
1LA7090-2AA..-Z
473.–
1.1
IE1
90 L
1LA7096-6AA..-Z
578.–
2.2
IE1
90 L
1LA7096-2AA..-Z
608.–
1.5
IE1
100 L
1LA7106-6AA..-Z
753.–
3
IE1
100 L
1LA7106-2AA..-Z
804.–
2.2
IE1
112 M 1LA7113-6AA..-Z
942.–
4
IE1
112 M 1LA7113-2AA..-Z
991.–
3
IE1
132 S
1LA7130-6AA..-Z
1190.–
5.5
IE1
132 S
1LA7130-2AA..-Z
1270.–
4
IE1
132 M 1LA7133-6AA..-Z
1490.–
7.5
IE1
132 S
1LA7131-2AA..-Z
1630.–
5.5
IE1
132 M 1LA7134-6AA..-Z
1870.–
11
IE1
160 M 1LA7163-2AA..-Z
2280.–
7.5
IE1
160 M 1LA7163-6AA..-Z
2430.–
15
IE1
160 M 1LA7164-2AA..-Z
2960.–
11
IE1
160 L
1LA7166-6AA..-Z
3380.–
18.5
IE1
160 L
1LA7166-2AA..-Z
3550.–
15
IE1
180 L
1LA5186-6AA..-Z
3980.–
22
IE1
180 M 1LA5183-2AA..-Z
3800.–
18.5
IE1
200 L
1LA5206-6AA..-Z
4900.–
30
IE1
200 L
1LA5206-2AA..-Z
4920.–
22
IE1
200 L
1LA5207-6AA..-Z
5740.–
37
IE1
200 L
1LA5207-2AA..-Z
6430.–
30
IE1
225 M 1LA5223-6AA..-Z
7900.–
45
IE1
225 M 1LA5223-2AA..-Z
7810.–
8-pole: 750 rpm at 50 Hz
4-pole: 1500 rpm at 50 Hz
0.09
–
71 M
1LA7070-8AB..-Z
319.–
0.12
–
63 M
1LA7060-4AB..-Z
264.–
0.12
–
71 M
1LA7073-8AB..-Z
359.–
0.18
–
63 M
1LA7063-4AB..-Z
285.–
0.18
–
80 M
1LA7080-8AB..-Z
365.–
0.25
–
71 M
1LA7070-4AB..-Z
286.–
0.25
–
80 M
1LA7083-8AB..-Z
452.–
0.37
–
71 M
1LA7073-4AB..-Z
318.–
0.37
–
90 S
1LA7090-8AB..-Z
532.–
0.55
–
80 M
1LA7080-4AA..-Z
342.–
0.55
–
90 L
1LA7096-8AB..-Z
647.–
0.75
IE1
80 M
1LA7083-4AA..-Z
373.–
0.75
–
100 L
1LA7106-8AB..-Z
782.–
1.1
IE1
90 S
1LA7090-4AA..-Z
443.–
1.1
–
100 L
1LA7107-8AB..-Z
991.–
1.5
IE1
90 L
1LA7096-4AA..-Z
524.–
1.5
–
112 M 1LA7113-8AB..-Z
1180.–
2.2
IE1
100 L
1LA7106-4AA..-Z
707.–
2.2
–
132 S
1LA7130-8AB..-Z
1520.–
3
IE1
100 L
1LA7107-4AA..-Z
813.–
3
–
132 M 1LA7133-8AB..-Z
1850.–
4
IE1
112 M 1LA7113-4AA..-Z
1040.–
4
–
160 M 1LA7163-8AB..-Z
2280.–
5.5
IE1
132 S
1LA7130-4AA..-Z
1330.–
5.5
–
160 M 1LA7164-8AB..-Z
2830.–
7.5
IE1
132 M 1LA7133-4AA..-Z
1710.–
7.5
–
160 L
1LA7166-8AB..-Z
3490.–
11
IE1
160 M 1LA7163-4AA..-Z
2320.–
11
–
180 L
1LA5186-8AB..-Z
4180.–
15
IE1
160 L
1LA7166-4AA..-Z
3020.–
15
–
200 L
1LA5207-8AB..-Z
5510.–
18.5
IE1
180 M 1LA5183-4AA..-Z
3310.–
18.5
–
225 S
1LA5220-8AB..-Z
6690.–
22
IE1
180 L
1LA5186-4AA..-Z
3900.–
22
–
225 M 1LA5223-8AB..-Z
7760.–
30
IE1
200 L
1LA5207-4AA..-Z
5170.–
37
IE1
225 S
1LA5220-4AA..-Z
6300.–
45
IE1
225 M 1LA5223-4AA..-Z
7600.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/7
4
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for Zone 2 or 21/22 in type of protection Ex n or Ex t (continued)
Series version
4
Cast-iron series 1LA6, 1LG4 with order code for explosion protection
with Standard Efficiency IE1
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
100 L … 315 L
Rated output at 50 Hz
0.75 ... 200 kW
Synchronous speed
750 ... 3600 rpm
Rated torque at 50 Hz
9.9 ... 1708 Nm
Efficiency
Standard Efficiency IE1
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame Article No.
Base
Prated, IE
Frame Article No.
Base
class
size
with order code
price
class
size
with order code
price
50 Hz
50 Hz
for explosion
for explosion
protection
protection
kW
FS
EUR
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
6-pole: 1000 rpm at 50 Hz
3
IE1
100 L
1LA6106-2AA..-Z
852.– 1.5
IE1
100 L
1LA6106-6AA..-Z
795.–
4
IE1
112 M 1LA6113-2AA..-Z
1050.– 2.2
IE1
112 M 1LA6113-6AA..-Z
993.–
5.5
IE1
132 S
1LA6130-2AA..-Z
1300.– 3
IE1
132 S
1LA6130-6AA..-Z
1240.–
7.5
IE1
132 S
1LA6131-2AA..-Z
1680.– 4
IE1
132 M 1LA6133-6AA..-Z
1530.–
11
IE1
160 M 1LA6163-2AA..-Z
2250.– 5.5
IE1
132 M 1LA6134-6AA..-Z
1930.–
15
IE1
160 M 1LA6164-2AA..-Z
2970.– 7.5
IE1
160 M 1LA6163-6AA..-Z
2460.–
18.5
IE1
160 L
1LA6166-2AA..-Z
3570.– 11
IE1
160 L
1LA6166-6AA..-Z
3390.–
22
IE1
180 M 1LG4183-2AA..-Z
4050.– 15
IE1
180 L
1LG4186-6AA..-Z
4260.–
30
IE1
200 L
1LG4206-2AA..-Z
5250.– 18.5
IE1
200 L
1LG4206-6AA..-Z
5220.–
37
IE1
200 L
1LG4207-2AA..-Z
6870.– 22
IE1
200 L
1LG4207-6AA..-Z
6150.–
45
IE1
225 M 1LG4223-2AA..-Z
8350.– 30
IE1
225 M 1LG4223-6AA..-Z
8440.–
55
IE1
250 M 1LG4253-2AB..-Z 10200.– 37
IE1
250 M 1LG4253-6AA..-Z 10200.–
75
IE1
280 S
1LG4280-2AB..-Z 13900.– 45
IE1
280 S
1LG4280-6AA..-Z 12600.–
90
IE1
280 M 1LG4283-2AB..-Z 17000.– 55
IE1
280 M 1LG4283-6AA..-Z 15200.–
110
IE1
315 S
1LG4310-2AB..-Z 20700.– 75
IE1
315 S
1LG4310-6AA..-Z 20700.–
132
IE1
315 M 1LG4313-2AB..-Z 24800.– 90
IE1
315 M 1LG4313-6AA..-Z 24800.–
160
IE1
315 L
1LG4316-2AB..-Z 30700.– 110
IE1
315 L
1LG4316-6AA..-Z 29800.–
200
IE1
315 L
1LG4317-2AB..-Z 38400.– 132
IE1
315 L
1LG4317-6AA..-Z 35400.–
4-pole: 1500 rpm at 50 Hz
160
IE1
315 L
1LG4318-6AA..-Z 43000.–
2.2
IE1
100 L
1LA6106-4AA..-Z
746.– 8-pole: 750 rpm at 50 Hz
3
IE1
100 L
1LA6107-4AA..-Z
860.– 0.75
–
100 L
1LA6106-8AB..-Z
824.–
4
IE1
112 M 1LA6113-4AA..-Z
1100.– 1.1
–
100 L
1LA6107-8AB..-Z
1050.–
5.5
IE1
132 S
1LA6130-4AA..-Z
1360.– 1.5
–
112 M 1LA6113-8AB..-Z
1250.–
7.5
IE1
132 M 1LA6133-4AA..-Z
1730.– 2.2
–
132 S
1LA6130-8AB..-Z
1580.–
11
IE1
160 M 1LA6163-4AA..-Z
2350.– 3
–
132 M 1LA6133-8AB..-Z
1900.–
15
IE1
160 L
1LA6166-4AA..-Z
3040.– 4
–
160 M 1LA6163-8AB..-Z
2250.–
18.5
IE1
180 M 1LG4183-4AA..-Z
3530.– 5.5
–
160 M 1LA6164-8AB..-Z
2840.–
22
IE1
180 L
1LG4186-4AA..-Z
4160.– 7.5
–
160 L
1LA6166-8AB..-Z
3550.–
30
IE1
200 L
1LG4207-4AA..-Z
5520.– 11
–
180 L
1LG4186-8AB..-Z
4470.–
37
IE1
225 S
1LG4220-4AA..-Z
6730.– 15
–
200 L
1LG4207-8AB..-Z
5900.–
45
IE1
225 M 1LG4223-4AA..-Z
8130.– 18.5
–
225 S
1LG4220-8AB..-Z
7140.–
55
IE1
250 M 1LG4253-4AA..-Z
9880.– 22
–
225 M 1LG4223-8AB..-Z
8300.–
75
IE1
280 S
1LG4280-4AA..-Z 13500.– 30
–
250 M 1LG4253-8AB..-Z 10900.–
90
IE1
280 M 1LG4283-4AA..-Z 15900.– 37
–
280 S
1LG4280-8AB..-Z 13200.–
110
IE1
315 S
1LG4310-4AA..-Z 19800.– 45
–
280 M 1LG4283-8AB..-Z 16000.–
132
IE1
315 M 1LG4313-4AA..-Z 23400.– 55
–
315 S
1LG4310-8AB..-Z 19600.–
160
IE1
315 L
1LG4316-4AA..-Z 28900.– 75
–
315 M 1LG4313-8AB..-Z 26200.–
200
IE1
315 L
1LG4317-4AA..-Z 35900.– 90
–
315 L
1LG4316-8AB..-Z 30900.–
110
–
315 L
1LG4317-8AB..-Z 37300.–
132
–
315 L
1LG4318-8AB..-Z 44700.–
4/8
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Standard delivery times in working days:
10
20
On
request
Orientation
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 2 or 21/22 in type of protection Ex n or Ex t (continued)
Series version
Aluminum series 1LA9
Aluminum series 1LA9
with order code for explosion protection
with order code for explosion protection
with High Efficiency IE2
NEMA Energy Efficient with order code D42 1)
Cooling
Self-ventilated (IC 411)
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Thermal class 130 (B)
Number of poles
2, 4, 6
2, 4, 6
Frame sizes (FS)
63 M ... 200 L
63 M ... 200 L
Rated output
0.12 ... 37 kW at 50 Hz
0.16 … 50 hp at 60 Hz
Synchronous speed
1000 ... 3000 rpm at 50 Hz
1200 ... 3600 rpm at 60 Hz
Rated torque
0.61 ... 215 Nm at 50 Hz
0.5 ... 179 Nm at 60 Hz
Efficiency
High Efficiency IE2
NEMA Energy Efficient MG1 Table 12-11 with order code D42 1)
Metal factor for metal surcharges (MS) N - W - - - - N-W----Price group (PG)
3Z1
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame Article No.
Base
Prated, EISA
Frame Article No.
Base
with order code
price
CC No. size
with order code
price
50 Hz class size
for explosion
for explosion
60 Hz CC032A
protection
protection
kW
FS
EUR
hp
FS
EUR
2-pole: 3000 rpm at 50 Hz
2-pole: 3600 rpm at 60 Hz
0.18 –
63 M 1LA9060-2KA..-Z
363.–
0.25 –
63 M
1LA9060-2KA..-Z D42+ O. R.
0.25 –
63 M 1LA9063-2KA..-Z
384.–
0.33 –
63 M
1LA9063-2KA..-Z D42+ O. R.
0.37 –
71 M 1LA9070-2KA..-Z
389.–
0.5
–
71 M
1LA9070-2KA..-Z D42+ O. R.
0.55 –
71 M 1LA9073-2KA..-Z
439.–
0.75 –
71 M
1LA9073-2KA..-Z D42+ O. R.
0.75 IE2
80 M 1LA9080-2KA..-Z
517.–
1
–
80 M
1LA9080-2KA..-Z D42+ O. R.
1.1
IE2
80 M 1LA9083-2KA..-Z
591.–
1.5
–
80 M
1LA9083-2KA..-Z D42+ O. R.
1.5
IE2
90 S
1LA9090-2KA..-Z
683.–
2
✓
90 S
1LA9090-2KA..-Z D42+ O. R.
2.2
IE2
90 L
1LA9096-2KA..-Z
881.–
3
✓
90 L
1LA9096-2KA..-Z D42+ O. R.
3
IE2
100 L 1LA9106-2KA..-Z 1060.–
4
–
100 L
1LA9106-2KA..-Z D42+ O. R.
4
IE2
112 M 1LA9113-2KA..-Z 1240.–
5
✓
112 M 1LA9113-2KA..-Z D42+ O. R.
5.5
IE2
132 S 1LA9130-2KA..-Z 1570.–
7.5
✓
132 S
1LA9130-2KA..-Z D42+ O. R.
7.5
IE2
132 S 1LA9131-2KA..-Z 1990.–
10
✓
132 S
1LA9131-2KA..-Z D42+ O. R.
11
IE2
160 M 1LA9163-2KA..-Z 2760.–
15
✓
160 M 1LA9163-2KA..-Z D42+ O. R.
15
IE2
160 M 1LA9164-2KA..-Z 3610.–
20
✓
160 M 1LA9164-2KA..-Z D42+ O. R.
18.5 IE2
160 L 1LA9166-2KA..-Z 4300.–
25
✓
160 L
1LA9166-2KA..-Z D42+ O. R.
22
IE2
180 M 1LA9183-2WA..-Z 4740.–
30
✓
180 M 1LA9183-2WA..-Z D42+ O. R.
30
IE2
200 L 1LA9206-2WA..-Z 6150.–
40
✓
200 L
1LA9206-2WA..-Z D42+ O. R.
37
IE2
200 L 1LA9207-2WA..-Z 7720.–
50
✓
200 L
1LA9207-2WA..-Z D42+ O. R.
4-pole: 1500 rpm at 50 Hz
4-pole: 1800 rpm at 60 Hz
0.12 –
63 M 1LA9060-4KA..-Z
370.–
0.16 –
63 M
1LA9060-4KA..-Z D42+ O. R.
0.18 –
63 M 1LA9063-4KA..-Z
399.–
0.25 –
63 M
1LA9063-4KA..-Z D42+ O. R.
0.25 –
71 M 1LA9070-4KA..-Z
397.–
0.33 –
71 M
1LA9070-4KA..-Z D42+ O. R.
0.37 –
71 M 1LA9073-4KA..-Z
445.–
0.5
–
71 M
1LA9073-4KA..-Z D42+ O. R.
0.55 –
80 M 1LA9080-4KA..-Z
513.–
0.75 –
80 M
1LA9080-4KA..-Z D42+ O. R.
0.75 IE2
80 M 1LA9083-4KA..-Z
560.–
1
–
80 M
1LA9083-4KA..-Z D42+ O. R.
1.1
IE2
90 S
1LA9090-4KA..-Z
662.–
1.5
✓
90 S
1LA9090-4KA..-Z D42+ O. R.
1.5
IE2
90 L
1LA9096-4KA..-Z
785.–
2
✓
90 L
1LA9096-4KA..-Z D42+ O. R.
2.2
IE2
100 L 1LA9106-4KA..-Z
963.–
3
–
100 L
1LA9106-4KA..-Z D42+ O. R.
3
IE2
100 L 1LA9107-4KA..-Z 1110.–
4
–
100 L
1LA9107-4KA..-Z D42+ O. R.
4
IE2
112 M 1LA9113-4KA..-Z 1360.–
5
✓
112 M 1LA9113-4KA..-Z D42+ O. R.
5.5
IE2
132 S 1LA9130-4KA..-Z 1690.–
7.5
✓
132 S
1LA9130-4KA..-Z D42+ O. R.
7.5
IE2
132 M 1LA9133-4KA..-Z 2150.–
10
✓
132 M 1LA9133-4KA..-Z D42+ O. R.
11
IE2
160 M 1LA9163-4KA..-Z 2820.–
15
✓
160 M 1LA9163-4KA..-Z D42+ O. R.
15
IE2
160 L 1LA9166-4KA..-Z 3660.–
20
✓
160 L
1LA9166-4KA..-Z D42+ O. R.
18.5 IE2
180 M 1LA9183-4WA..-Z 4040.–
25
✓
180 M 1LA9183-4WA..-Z D42+ O. R.
22
IE2
180 L 1LA9186-4WA..-Z 4670.–
30
✓
180 L
1LA9186-4WA..-Z D42+ O. R.
30
IE2
200 L 1LA9207-4WA..-Z 6040.–
40
✓
200 L
1LA9207-4WA..-Z D42+ O. R.
6-pole: 1000 rpm at 50 Hz
6-pole: 1200 rpm at 60 Hz
0.75 IE2
90 S
1LA9090-6KA..-Z
649.–
1
✓
90 S
1LA9090-6KA..-Z D42+ O. R.
1.1
IE2
90 L
1LA9096-6KA..-Z
805.–
1.5
✓
90 L
1LA9096-6KA..-Z D42+ O. R.
1.5
IE2
100 L 1LA9106-6KA..-Z
951.–
2
–
100 L
1LA9106-6KA..-Z D42+ O. R.
2.2
IE2
112 M 1LA9113-6KA..-Z 1190.–
3
✓
112 M 1LA9113-6KA..-Z D42+ O. R.
5
✓
132 M 1LA9133-6KA..-Z D42+ O. R.
4
IE2
132 M 1LA9133-6KA..-Z 1860.–
5.5
IE2
132 M 1LA9134-6KA..-Z 2340.–
7.5
✓
132 M 1LA9134-6KA..-Z D42+ O. R.
1)
Notes on order code D42
7.5
IE2
160 M 1LA9163-6KA..-Z 2970.–
10
✓
160 M 1LA9163-6KA..-Z D42+ O. R.
NEMA Energy Efficient for
15
✓
160 L
1LA9166-6KA..-Z D42+ O. R.
11
IE2
160 L 1LA9166-6KA..-Z 4100.–
explosion-proof motors:
- Comprises CC No.
15
IE2
180 L 1LA9186-6WA..-Z 4970.–
20
✓
180 L
1LA9186-6WA..-Z D42+ O. R.
- For ≤ 200 hp only flange18.5 IE2
200 L 1LA9206-6WA..-Z 6130.–
25
✓
200 L
1LA9206-6WA..-Z D42+ O. R.
mounting types are admissible
30
✓
200 L
1LA9207-6WA..-Z D42+ O. R.
22
IE2
200 L 1LA9207-6WA..-Z 7060.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/9
4
© Siemens AG 2015
SIMOTICS XP 1LG Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for Zone 2 or 21/22 in type of protection Ex n or Ex t (continued)
Series version
4
Cast-iron series 1LG6 with order code for explosion protection
with High Efficiency IE2
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
180 M ... 315 L
Rated output at 50 Hz
11 ... 250 kW
Synchronous speed at 50 Hz
750 ... 3000 rpm
Rated torque at 50 Hz
71 ... 1704 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
Prated, IE
Frame Article No.
Base
class
size
with order code
price
class
size
with order code
price
50 Hz
50 Hz
for explosion
for explosion
protection
protection
kW
FS
 New
EUR
kW
FS
EUR
2-pole: 3000 rpm at 50 Hz
8-pole: 750 rpm at 50 Hz
22
IE2
180 M
1LG6183-2AA..-Z
5220.– 11
–
180 L
1LG6186-8AB..-Z
5750.–
30
IE2
200 L
1LG6206-2AA..-Z
6760.– 15
–
200 L
1LG6207-8AB..-Z
7580.–
37
IE2
200 L
1LG6207-2AA..-Z
8500.– 18.5
–
225 S
1LG6220-8AB..-Z
9200.–
45
IE2
200 L
1LG6208-2AA..-Z 10100.– 22
–
225 M 1LG6223-8AB..-Z 10500.–
45
IE2
225 M
1LG6223-2AA..-Z 10100.– 30
–
250 M 1LG6253-8AB..-Z 13600.–
55
IE2
225 M
1LG6228-2AA..-Z 12000.– 37
–
280 S
1LG6280-8AB..-Z 16300.–
55
IE2
250 M
1LG6253-2AA..-Z 12000.– 45
–
280 M 1LG6283-8AB..-Z 19800.–
75
IE2
250 M
1LG6258-2AA..-Z 16500.– 55
–
315 S
1LG6310-8AB..-Z 23400.–
75
IE2
280 S
1LG6280-2AB..-Z 16500.– 75
–
315 M 1LG6313-8AB..-Z 31500.–
90
IE2
280 M
1LG6283-2AB..-Z 19500.– 90
–
315 L
1LG6316-8AB..-Z 35100.–
110
IE2
280 M
1LG6288-2AA..-Z 23300.– 110
–
315 L
1LG6317-8AB..-Z 42300.–
110
IE2
315 S
1LG6310-2AB..-Z 23300.– 132
–
315 L
1LG6318-8AB..-Z 50500.–
132
IE2
315 M
1LG6313-2AB..-Z 28000.–
160
IE2
315 L
1LG6316-2AB..-Z 34900.–
200
IE2
315 L
1LG6317-2AB..-Z 43500.–
250
IE2
315 L
1LG6318-2AA..-Z 53500.–
4-pole: 1500 rpm at 50 Hz
18.5
IE2
180 M
1LG6183-4AA..-Z
4420.–
22
IE2
180 M
1LG6186-4AA..-Z
5140.–
30
IE2
200 L
1LG6207-4AA..-Z
6670.–
37
IE2
225 S
1LG6220-4AA..-Z
8100.–
45
IE2
225 M
1LG6223-4AA..-Z
9530.–
55
IE2
225 M
1LG6228-4AA..-Z 11600.–
55
IE2
250 M
1LG6253-4AA..-Z 11600.–
75
IE2
250 M
1LG6258-4AA..-Z 15600.–
75
IE2
280 S
1LG6280-4AA..-Z 15600.–
90
IE2
280 M
1LG6283-4AA..-Z 18300.–
110
IE2
280 M
1LG6288-4AA..-Z 22800.–
110
IE2
315 S
1LG6310-4AA..-Z 22800.–
132
IE2
315 M
1LG6313-4AA..-Z 27100.–
160
IE2
315 L
1LG6316-4AA..-Z 32600.–
200
IE2
315 L
1LG6317-4AA..-Z 40800.–
250
IE2
315 L
1LG6318-4AA..-Z 48200.–
6-pole: 1000 rpm at 50 Hz
15
IE2
180 L
1LG6186-6AA..-Z
5490.–
18.5
IE2
200 L
1LG6206-6AA..-Z
6710.–
22
IE2
200 L
1LG6207-6AA..-Z
7780.–
30
IE2
225 M
1LG6223-6AA..-Z 10400.–
37
IE2
225 M
1LG6228-6AA..-Z 12700.–
37
IE2
250 M
1LG6253-6AA..-Z 12700.–
45
IE2
250 M
1LG6258-6AA..-Z 15500.–
45
IE2
280 S
1LG6280-6AA..-Z 15500.–
55
IE2
280 M
1LG6283-6AA..-Z 18300.–
75
IE2
280 M
1LG6288-6AA..-Z 24800.–
75
IE2
315 S
1LG6310-6AA..-Z 24800.–
90
IE2
315 M
1LG6313-6AA..-Z 28000.–
110
IE2
315 L
1LG6316-6AA..-Z 33700.–
132
IE2
315 L
1LG6317-6AA..-Z 40100.–
160
IE2
315 L
1LG6318-6AA..-Z 48800.–
4/10
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LG Explosion-Proof Motors
Standard delivery times in working days:
10
20
On
request
Orientation
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 2 or 21/22 in type of protection Ex n or Ex t (continued)
Series version
Cast-iron series 1LG6 with order code for explosion protection
NEMA Energy Efficient with order code D42 1)
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
180 M ... 315 L
Rated output at 60 Hz
20 … 300 hp
Synchronous speed at 60 Hz
1200 ... 3600 rpm
Rated torque at 60 Hz
60 ... 1200 Nm
Efficiency
NEMA Energy Efficient MG1 Table 12-11 with order code D42 1)
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, EISA
Frame
Article No.
Base
CC No. size
with order code
price
60 Hz
CC032A
for explosion protection
hp
FS
EUR
2-pole: 3600 rpm at 60 Hz
30
✓
180 M
1LG6183-2AA..-Z D42+ O. R.
40
✓
200 L
1LG6206-2AA..-Z D42+ O. R.
50
✓
200 L
1LG6207-2AA..-Z D42+ O. R.
60
✓
200 L
1LG6208-2AA..-Z D42+ O. R.
60
✓
225 M
1LG6223-2AA..-Z D42+ O. R.
75
✓
225 M
1LG6228-2AA..-Z D42+ O. R.
75
–
250 M
1LG6253-2AA..-Z D42+ O. R.
100
✓
250 M
1LG6258-2AA..-Z D42+ O. R.
100
–
280 S
1LG6280-2AB..-Z D42+ O. R.
125
✓
280 M
1LG6283-2AB..-Z D42+ O. R.
150
✓
280 M
1LG6288-2AA..-Z D42+ O. R.
150
✓
315 S
1LG6310-2AB..-Z D42+ O. R.
175
–
315 M
1LG6313-2AB..-Z D42+ O. R.
200
✓
315 L
1LG6316-2AB..-Z D42+ O. R.
250
✓
315 L
1LG6317-2AB..-Z D42+ O. R.
300
✓
315 L
1LG6318-2AA..-Z D42+ O. R.
4-pole: 1800 rpm at 60 Hz
25
✓
180 M
1LG6183-4AA..-Z D42+ O. R.
30
✓
180 M
1LG6186-4AA..-Z D42+ O. R.
40
✓
200 L
1LG6207-4AA..-Z D42+ O. R.
50
–
225 S
1LG6220-4AA..-Z D42+ O. R.
60
✓
225 M
1LG6223-4AA..-Z D42+ O. R.
75
✓
225 M
1LG6228-4AA..-Z D42+ O. R.
75
–
250 M
1LG6253-4AA..-Z D42+ O. R.
100
✓
250 M
1LG6258-4AA..-Z D42+ O. R.
100
–
280 S
1LG6280-4AA..-Z D42+ O. R.
125
✓
280 M
1LG6283-4AA..-Z D42+ O. R.
150
✓
280 M
1LG6288-4AA..-Z D42+ O. R.
150
✓
315 S
1LG6310-4AA..-Z D42+ O. R.
175
–
315 M
1LG6313-4AA..-Z D42+ O. R.
200
✓
315 L
1LG6316-4AA..-Z D42+ O. R.
250
✓
315 L
1LG6317-4AA..-Z D42+ O. R.
300
✓
315 L
1LG6318-4AA..-Z D42+ O. R.
6-pole: 1200 rpm at 60 Hz
20
✓
180 L
1LG6186-6AA..-Z D42+ O. R.
25
✓
200 L
1LG6206-6AA..-Z D42+ O. R.
30
✓
200 L
1LG6207-6AA..-Z D42+ O. R.
40
✓
225 M
1LG6223-6AA..-Z D42+ O. R.
50
✓
225 M
1LG6228-6AA..-Z D42+ O. R.
50
–
250 M
1LG6253-6AA..-Z D42+ O. R.
60
✓
250 M
1LG6258-6AA..-Z D42+ O. R.
60
–
280 S
1LG6280-6AA..-Z D42+ O. R.
75
–
280 M
1LG6283-6AA..-Z D42+ O. R.
100
✓
280 M
1LG6288-6AA..-Z D42+ O. R.
1) Notes on order code D42
100
✓
315 S
1LG6310-6AA..-Z D42+ O. R.
NEMA Energy Efficient for
125
✓
315 M
1LG6313-6AA..-Z D42+ O. R.
explosion-proof motors:
- Comprises CC No.
150
✓
315 L
1LG6316-6AA..-Z D42+ O. R.
- For ≤ 200 hp only flange175
–
315 L
1LG6317-6AA..-Z D42+ O. R.
mounting types are admissible
200
✓
315 L
1LG6318-6AA..-Z D42+ O. R.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/11
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for Zone 21 in type of protection Ex tb
Series version
4
Cast-iron series 1MB1511 Basic Line, 1MB1611 Performance Line
with High Efficiency IE2
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
0.75 ... 200 kW
Synchronous speed at 50 Hz
750 ... 3600 rpm
Rated torque at 50 Hz
9.9 ... 1703 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
2-pole: 3000 rpm at 50 Hz
3
IE2
100 L
 1MB1511-1AA4.-....
1240.–
 1MB1611-1AA4.-....
1340.–
4
IE2
112 M
 1MB1511-1BA2.-....
1460.–
 1MB1611-1BA2.-....
1580.–
5.5
IE2
132 S
 1MB1511-1CA0.-....
1830.–
 1MB1611-1CA0.-....
1990.–
7.5
IE2
132 S
 1MB1511-1CA1.-....
2250.–
 1MB1611-1CA1.-....
2440.–
11
IE2
160 M
 1MB1511-1DA2.-....
3100.–
 1MB1611-1DA2.-....
3510.–
15
IE2
160 M
 1MB1511-1DA3.-....
3920.–
 1MB1611-1DA3.-....
4450.–
18.5
IE2
160 L
 1MB1511-1DA4.-....
4600.–
 1MB1611-1DA4.-....
5230.–
22
IE2
180 M
 1MB1511-1EA2.-....
5270.–
 1MB1611-1EA2.-....
5740.–
30
IE2
200 L
 1MB1511-2AA4.-....
7010.–
 1MB1611-2AA4.-....
7610.–
37
IE2
200 L
 1MB1511-2AA5.-....
8560.–
 1MB1611-2AA5.-....
9330.–
45
IE2
225 M
 1MB1511-2BA2.-....
10400.–
 1MB1611-2BA2.-....
11300.–
55
IE2
250 M
 1MB1511-2CA2.-....
12400.–
 1MB1611-2CA2.-....
13500.–
75
IE2
280 S
 1MB1511-2DA0.-....
16800.–
 1MB1611-2DA0.-....
17200.–
90
IE2
280 M
 1MB1511-2DA2.-....
19500.–
 1MB1611-2DA2.-....
20400.–
110
IE2
315 S
 1MB1511-3AA0.-....
23400.–
 1MB1611-3AA0.-....
24500.–
132
IE2
315 M
 1MB1511-3AA2.-....
27600.–
 1MB1611-3AA2.-....
28800.–
160
IE2
315 L
 1MB1511-3AA4.-....
33700.–
 1MB1611-3AA4.-....
35300.–
200
IE2
315 L
 1MB1511-3AA5.-....
41500.–
 1MB1611-3AA5.-....
43400.–
4-pole: 1500 rpm at 50 Hz
2.2
IE2
100 L
 1MB1511-1AB4.-....
1150.–
 1MB1611-1AB4.-....
1240.–
3
IE2
100 L
 1MB1511-1AB5.-....
1290.–
 1MB1611-1AB5.-....
1400.–
4
IE2
112 M
 1MB1511-1BB2.-....
1560.–
 1MB1611-1BB2.-....
1700.–
5.5
IE2
132 S
 1MB1511-1CB0.-....
1950.–
 1MB1611-1CB0.-....
2120.–
7.5
IE2
132 M
 1MB1511-1CB2.-....
2400.–
 1MB1611-1CB2.-....
2610.–
11
IE2
160 M
 1MB1511-1DB2.-....
3170.–
 1MB1611-1DB2.-....
3570.–
15
IE2
160 L
 1MB1511-1DB4.-....
3980.–
 1MB1611-1DB4.-....
4520.–
18.5
IE2
180 M
 1MB1511-1EB2.-....
4550.–
 1MB1611-1EB2.-....
4950.–
22
IE2
180 L
 1MB1511-1EB4.-....
5200.–
 1MB1611-1EB4.-....
5660.–
30
IE2
200 L
 1MB1511-2AB5.-....
6920.–
 1MB1611-2AB5.-....
7520.–
37
IE2
225 S
 1MB1511-2BB0.-....
8570.–
 1MB1611-2BB0.-....
9300.–
45
IE2
225 M
 1MB1511-2BB2.-....
9860.–
 1MB1611-2BB2.-....
10700.–
55
IE2
250 M
 1MB1511-2CB2.-....
12000.–
 1MB1611-2CB2.-....
13000.–
75
IE2
280 S
 1MB1511-2DB0.-....
16000.–
 1MB1611-2DB0.-....
16400.–
90
IE2
280 M
 1MB1511-2DB2.-....
18400.–
 1MB1611-2DB2.-....
18900.–
110
IE2
315 S
 1MB1511-3AB0.-....
22900.–
 1MB1611-3AB0.-....
23500.–
132
IE2
315 M
 1MB1511-3AB2.-....
26700.–
 1MB1611-3AB2.-....
27400.–
160
IE2
315 L
 1MB1511-3AB4.-....
31700.–
 1MB1611-3AB4.-....
32600.–
200
IE2
315 L
 1MB1511-3AB5.-....
39000.–
 1MB1611-3AB5.-....
40100.–
4/12
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 21 in type of protection Ex tb (continued)
Series version
Cast-iron series 1MB1511 Basic Line, 1MB1611 Performance Line (continued)
with High Efficiency IE2
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
0.75 ... 200 kW
Synchronous speed at 50 Hz
750 ... 3600 rpm
Rated torque at 50 Hz
9.9 ... 1703 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
6-pole: 1000 rpm at 50 Hz
1.5
IE2
100 L
 1MB1511-1AC4.-....
1140.–
 1MB1611-1AC4.-....
1230.–
2.2
IE2
112 M
 1MB1511-1BC2.-....
1410.–
 1MB1611-1BC2.-....
1530.–
3
IE2
132 S
 1MB1511-1CC0.-....
1780.–
 1MB1611-1CC0.-....
1920.–
4
IE2
132 M
 1MB1511-1CC2.-....
2120.–
 1MB1611-1CC2.-....
2300.–
5.5
IE2
132 M
 1MB1511-1CC3.-....
2590.–
 1MB1611-1CC3.-....
2810.–
7.5
IE2
160 M
 1MB1511-1DC2.-....
3300.–
 1MB1611-1DC2.-....
3740.–
11
IE2
160 L
 1MB1511-1DC4.-....
4410.–
 1MB1611-1DC4.-....
5010.–
15
IE2
180 L
 1MB1511-1EC4.-....
5510.–
 1MB1611-1EC4.-....
6000.–
18.5
IE2
200 L
 1MB1511-2AC4.-....
6960.–
 1MB1611-2AC4.-....
7570.–
22
IE2
200 L
 1MB1511-2AC5.-....
7920.–
 1MB1611-2AC5.-....
8610.–
30
IE2
225 M
 1MB1511-2BC2.-....
10700.–
 1MB1611-2BC2.-....
11600.–
37
IE2
250 M
 1MB1511-2CC2.-....
13000.–
 1MB1611-2CC2.-....
14100.–
45
IE2
280 S
 1MB1511-2DC0.-....
15900.–
 1MB1611-2DC0.-....
16300.–
55
IE2
280 M
 1MB1511-2DC2.-....
18400.–
 1MB1611-2DC2.-....
18900.–
75
IE2
315 S
 1MB1511-3AC0.-....
24700.–
 1MB1611-3AC0.-....
25400.–
90
IE2
315 M
 1MB1511-3AC2.-....
27600.–
 1MB1611-3AC2.-....
28300.–
110
IE2
315 L
 1MB1511-3AC4.-....
32700.–
 1MB1611-3AC4.-....
33600.–
132
IE2
315 L
 1MB1511-3AC5.-....
38500.–
 1MB1611-3AC5.-....
39600.–
160
IE2
315 L
 1MB1511-3AC6.-....
46200.–
 1MB1611-3AC6.-....
47500.–
8-pole: 750 rpm at 50 Hz
0.75
100 L
 1MB1511-1AD4.-....
1250.–
 1MB1611-1AD4.-....
1360.–
1.1
100 L
 1MB1511-1AD5.-....
1520.–
 1MB1611-1AD5.-....
1650.–
1.5
112 M
 1MB1511-1BD2.-....
1790.–
 1MB1611-1BD2.-....
1960.–
2.2
132 S
 1MB1511-1CD0.-....
2310.–
 1MB1611-1CD0.-....
2520.–
3
132 M
 1MB1511-1CD2.-....
2760.–
 1MB1611-1CD2.-....
3010.–
4
160 M
 1MB1511-1DD2.-....
3420.–
 1MB1611-1DD2.-....
3870.–
5.5
160 M
 1MB1511-1DD3.-....
4120.–
 1MB1611-1DD3.-....
4670.–
7.5
160 L
 1MB1511-1DD4.-....
4880.–
 1MB1611-1DD4.-....
5550.–
11
180 L
 1MB1511-1ED4.-....
5850.–
 1MB1611-1ED4.-....
6380.–
15
200 L
 1MB1511-2AD5.-....
7880.–
 1MB1611-2AD5.-....
8580.–
18.5
225 S
 1MB1511-2BD0.-....
9730.–
 1MB1611-2BD0.-....
10600.–
22
225 M
 1MB1511-2BD2.-....
10900.–
 1MB1611-2BD2.-....
11900.–
30
250 M
 1MB1511-2CD2.-....
14100.–
 1MB1611-2CD2.-....
15400.–
37
280 S
 1MB1511-2DD0.-....
16900.–
 1MB1611-2DD0.-....
17400.–
45
280 M
 1MB1511-2DD2.-....
20200.–
 1MB1611-2DD2.-....
20800.–
55
315 S
 1MB1511-3AD0.-....
23900.–
 1MB1611-3AD0.-....
24700.–
75
315 M
 1MB1511-3AD2.-....
31300.–
 1MB1611-3AD2.-....
32200.–
90
315 L
 1MB1511-3AD4.-....
34600.–
 1MB1611-3AD4.-....
35600.–
110
315 L
 1MB1511-3AD5.-....
41200.–
 1MB1611-3AD5.-....
42400.–
132
315 L
 1MB1511-3AD6.-....
48700.–
 1MB1611-3AD6.-....
50200.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/13
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for Zone 22 in type of protection Ex tc
Series version
4
Cast-iron series 1MB1521 Basic Line, 1MB1621 Performance Line
with High Efficiency IE2
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
0.75 ... 200 kW
Synchronous speed at 50 Hz
750 ... 3600 rpm
Rated torque at 50 Hz
9.9 ... 1703 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
2-pole: 3000 rpm at 50 Hz
3
IE2
100 L
 1MB1521-1AA4.-....
1130.–
 1MB1621-1AA4.-....
1230.–
4
IE2
112 M
 1MB1521-1BA2.-....
1340.–
 1MB1621-1BA2.-....
1460.–
5.5
IE2
132 S
 1MB1521-1CA0.-....
1710.–
 1MB1621-1CA0.-....
1870.–
7.5
IE2
132 S
 1MB1521-1CA1.-....
2130.–
 1MB1621-1CA1.-....
2320.–
11
IE2
160 M
 1MB1521-1DA2.-....
2960.–
 1MB1621-1DA2.-....
3370.–
15
IE2
160 M
 1MB1521-1DA3.-....
3780.–
 1MB1621-1DA3.-....
4310.–
18.5
IE2
160 L
 1MB1521-1DA4.-....
4460.–
 1MB1621-1DA4.-....
5090.–
22
IE2
180 M
 1MB1521-1EA2.-....
5150.–
 1MB1621-1EA2.-....
5620.–
30
IE2
200 L
 1MB1521-2AA4.-....
6750.–
 1MB1621-2AA4.-....
7350.–
37
IE2
200 L
 1MB1521-2AA5.-....
8300.–
 1MB1621-2AA5.-....
9070.–
45
IE2
225 M
 1MB1521-2BA2.-....
9960.–
 1MB1621-2BA2.-....
10900.–
55
IE2
250 M
 1MB1521-2CA2.-....
11800.–
 1MB1621-2CA2.-....
12900.–
75
IE2
280 S
 1MB1521-2DA0.-....
16000.–
 1MB1621-2DA0.-....
16400.–
90
IE2
280 M
 1MB1521-2DA2.-....
18700.–
 1MB1621-2DA2.-....
19600.–
110
IE2
315 S
 1MB1521-3AA0.-....
22300.–
 1MB1621-3AA0.-....
23400.–
132
IE2
315 M
 1MB1521-3AA2.-....
26500.–
 1MB1621-3AA2.-....
27700.–
160
IE2
315 L
 1MB1521-3AA4.-....
32600.–
 1MB1621-3AA4.-....
34200.–
200
IE2
315 L
 1MB1521-3AA5.-....
40400.–
 1MB1621-3AA5.-....
42300.–
4-pole: 1500 rpm at 50 Hz
2.2
IE2
100 L
 1MB1521-1AB4.-....
1040.–
 1MB1621-1AB4.-....
1130.–
3
IE2
100 L
 1MB1521-1AB5.-....
1180.–
 1MB1621-1AB5.-....
1290.–
4
IE2
112 M
 1MB1521-1BB2.-....
1440.–
 1MB1621-1BB2.-....
1580.–
5.5
IE2
132 S
 1MB1521-1CB0.-....
1830.–
 1MB1621-1CB0.-....
2000.–
7.5
IE2
132 M
 1MB1521-1CB2.-....
2280.–
 1MB1621-1CB2.-....
2490.–
11
IE2
160 M
 1MB1521-1DB2.-....
3030.–
 1MB1621-1DB2.-....
3430.–
15
IE2
160 L
 1MB1521-1DB4.-....
3840.–
 1MB1621-1DB4.-....
4380.–
18.5
IE2
180 M
 1MB1521-1EB2.-....
4430.–
 1MB1621-1EB2.-....
4830.–
22
IE2
180 L
 1MB1521-1EB4.-....
5080.–
 1MB1621-1EB4.-....
5540.–
30
IE2
200 L
 1MB1521-2AB5.-....
6660.–
 1MB1621-2AB5.-....
7260.–
37
IE2
225 S
 1MB1521-2BB0.-....
8130.–
 1MB1621-2BB0.-....
8860.–
45
IE2
225 M
 1MB1521-2BB2.-....
9420.–
 1MB1621-2BB2.-....
10300.–
55
IE2
250 M
 1MB1521-2CB2.-....
11400.–
 1MB1621-2CB2.-....
12400.–
75
IE2
280 S
 1MB1521-2DB0.-....
15200.–
 1MB1621-2DB0.-....
15600.–
90
IE2
280 M
 1MB1521-2DB2.-....
17600.–
 1MB1621-2DB2.-....
18100.–
110
IE2
315 S
 1MB1521-3AB0.-....
21800.–
 1MB1621-3AB0.-....
22400.–
132
IE2
315 M
 1MB1521-3AB2.-....
25600.–
 1MB1621-3AB2.-....
26300.–
160
IE2
315 L
 1MB1521-3AB4.-....
30600.–
 1MB1621-3AB4.-....
31500.–
200
IE2
315 L
 1MB1521-3AB5.-....
37900.–
 1MB1621-3AB5.-....
39000.–
4/14
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 22 in type of protection Ex tc (continued)
Series version
Cast-iron series 1MB1521 Basic Line, 1MB1621 Performance Line (continued)
with High Efficiency IE2
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
0.75 ... 200 kW
Synchronous speed at 50 Hz
750 ... 3600 rpm
Rated torque at 50 Hz
9.9 ... 1703 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
6-pole: 1000 rpm at 50 Hz
1.5
IE2
100 L
 1MB1521-1AC4.-....
1030.–
 1MB1621-1AC4.-....
1120.–
2.2
IE2
112 M
 1MB1521-1BC2.-....
1290.–
 1MB1621-1BC2.-....
1410.–
3
IE2
132 S
 1MB1521-1CC0.-....
1660.–
 1MB1621-1CC0.-....
1800.–
4
IE2
132 M
 1MB1521-1CC2.-....
2000.–
 1MB1621-1CC2.-....
2180.–
5.5
IE2
132 M
 1MB1521-1CC3.-....
2470.–
 1MB1621-1CC3.-....
2690.–
7.5
IE2
160 M
 1MB1521-1DC2.-....
3160.–
 1MB1621-1DC2.-....
3600.–
11
IE2
160 L
 1MB1521-1DC4.-....
4270.–
 1MB1621-1DC4.-....
4870.–
15
IE2
180 L
 1MB1521-1EC4.-....
5390.–
 1MB1621-1EC4.-....
5880.–
18.5
IE2
200 L
 1MB1521-2AC4.-....
6700.–
 1MB1621-2AC4.-....
7310.–
22
IE2
200 L
 1MB1521-2AC5.-....
7660.–
 1MB1621-2AC5.-....
8350.–
30
IE2
225 M
 1MB1521-2BC2.-....
10200.–
 1MB1621-2BC2.-....
11200.–
37
IE2
250 M
 1MB1521-2CC2.-....
12400.–
 1MB1621-2CC2.-....
13500.–
45
IE2
280 S
 1MB1521-2DC0.-....
15100.–
 1MB1621-2DC0.-....
15500.–
55
IE2
280 M
 1MB1521-2DC2.-....
17600.–
 1MB1621-2DC2.-....
18100.–
75
IE2
315 S
 1MB1521-3AC0.-....
23600.–
 1MB1621-3AC0.-....
24300.–
90
IE2
315 M
 1MB1521-3AC2.-....
26500.–
 1MB1621-3AC2.-....
27200.–
110
IE2
315 L
 1MB1521-3AC4.-....
31600.–
 1MB1621-3AC4.-....
32500.–
132
IE2
315 L
 1MB1521-3AC5.-....
37400.–
 1MB1621-3AC5.-....
38500.–
160
IE2
315 L
 1MB1521-3AC6.-....
45100.–
 1MB1621-3AC6.-....
46400.–
8-pole: 750 rpm at 50 Hz
0.75
100 L
 1MB1521-1AD4.-....
1140.–
 1MB1621-1AD4.-....
1250.–
1.1
100 L
 1MB1521-1AD5.-....
1410.–
 1MB1621-1AD5.-....
1540.–
1.5
112 M
 1MB1521-1BD2.-....
1670.–
 1MB1621-1BD2.-....
1840.–
2.2
132 S
 1MB1521-1CD0.-....
2190.–
 1MB1621-1CD0.-....
2410.–
3
132 M
 1MB1521-1CD2.-....
2640.–
 1MB1621-1CD2.-....
2900.–
4
160 M
 1MB1521-1DD2.-....
3280.–
 1MB1621-1DD2.-....
3730.–
5.5
160 M
 1MB1521-1DD3.-....
3970.–
 1MB1621-1DD3.-....
4520.–
7.5
160 L
 1MB1521-1DD4.-....
4740.–
 1MB1621-1DD4.-....
5410.–
11
180 L
 1MB1521-1ED4.-....
5720.–
 1MB1621-1ED4.-....
6250.–
15
200 L
 1MB1521-2AD5.-....
7620.–
 1MB1621-2AD5.-....
8330.–
18.5
225 S
 1MB1521-2BD0.-....
9290.–
 1MB1621-2BD0.-....
10100.–
22
225 M
 1MB1521-2BD2.-....
10500.–
 1MB1621-2BD2.-....
11500.–
30
250 M
 1MB1521-2CD2.-....
13500.–
 1MB1621-2CD2.-....
14800.–
37
280 S
 1MB1521-2DD0.-....
16100.–
 1MB1621-2DD0.-....
16600.–
45
280 M
 1MB1521-2DD2.-....
19400.–
 1MB1621-2DD2.-....
20000.–
55
315 S
 1MB1521-3AD0.-....
22900.–
 1MB1621-3AD0.-....
23600.–
75
315 M
 1MB1521-3AD2.-....
30200.–
 1MB1621-3AD2.-....
31100.–
90
315 L
 1MB1521-3AD4.-....
33500.–
 1MB1621-3AD4.-....
34500.–
110
315 L
 1MB1521-3AD5.-....
40100.–
 1MB1621-3AD5.-....
41300.–
132
315 L
 1MB1521-3AD6.-....
47700.–
 1MB1621-3AD6.-....
49100.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/15
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for Zone 2 in type of protection Ex n
Series version
4
Cast-iron series 1MB1531 Basic Line, 1MB1631 Performance Line
with High Efficiency IE2
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
0.75 ... 200 kW
Synchronous speed at 50 Hz
750 ... 3600 rpm
Rated torque at 50 Hz
9.9 ... 1703 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
2-pole: 3000 rpm at 50 Hz
3
IE2
100 L
 1MB1531-1AA4.-....
1190.–
 1MB1631-1AA4.-....
1290.–
4
IE2
112 M
 1MB1531-1BA2.-....
1410.–
 1MB1631-1BA2.-....
1530.–
5.5
IE2
132 S
 1MB1531-1CA0.-....
1780.–
 1MB1631-1CA0.-....
1940.–
7.5
IE2
132 S
 1MB1531-1CA1.-....
2200.–
 1MB1631-1CA1.-....
2390.–
11
IE2
160 M
 1MB1531-1DA2.-....
3020.–
 1MB1631-1DA2.-....
3430.–
15
IE2
160 M
 1MB1531-1DA3.-....
3840.–
 1MB1631-1DA3.-....
4370.–
18.5
IE2
160 L
 1MB1531-1DA4.-....
4520.–
 1MB1631-1DA4.-....
5150.–
22
IE2
180 M
 1MB1531-1EA2.-....
5140.–
 1MB1631-1EA2.-....
5610.–
30
IE2
200 L
 1MB1531-2AA4.-....
6660.–
 1MB1631-2AA4.-....
7260.–
37
IE2
200 L
 1MB1531-2AA5.-....
8210.–
 1MB1631-2AA5.-....
8980.–
45
IE2
225 M
 1MB1531-2BA2.-....
9810.–
 1MB1631-2BA2.-....
10700.–
55
IE2
250 M
 1MB1531-2CA2.-....
11600.–
 1MB1631-2CA2.-....
12700.–
75
IE2
280 S
 1MB1531-2DA0.-....
15800.–
 1MB1631-2DA0.-....
16200.–
90
IE2
280 M
 1MB1531-2DA2.-....
18500.–
 1MB1631-2DA2.-....
19400.–
110
IE2
315 S
 1MB1531-3AA0.-....
22200.–
 1MB1631-3AA0.-....
23300.–
132
IE2
315 M
 1MB1531-3AA2.-....
26400.–
 1MB1631-3AA2.-....
27600.–
160
IE2
315 L
 1MB1531-3AA4.-....
32500.–
 1MB1631-3AA4.-....
34100.–
200
IE2
315 L
 1MB1531-3AA5.-....
40300.–
 1MB1631-3AA5.-....
42200.–
4-pole: 1500 rpm at 50 Hz
2.2
IE2
100 L
 1MB1531-1AB4.-....
1100.–
 1MB1631-1AB4.-....
1190.–
3
IE2
100 L
 1MB1531-1AB5.-....
1240.–
 1MB1631-1AB5.-....
1350.–
4
IE2
112 M
 1MB1531-1BB2.-....
1510.–
 1MB1631-1BB2.-....
1650.–
5.5
IE2
132 S
 1MB1531-1CB0.-....
1900.–
 1MB1631-1CB0.-....
2070.–
7.5
IE2
132 M
 1MB1531-1CB2.-....
2350.–
 1MB1631-1CB2.-....
2560.–
11
IE2
160 M
 1MB1531-1DB2.-....
3090.–
 1MB1631-1DB2.-....
3490.–
15
IE2
160 L
 1MB1531-1DB4.-....
3900.–
 1MB1631-1DB4.-....
4440.–
18.5
IE2
180 M
 1MB1531-1EB2.-....
4420.–
 1MB1631-1EB2.-....
4820.–
22
IE2
180 L
 1MB1531-1EB4.-....
5070.–
 1MB1631-1EB4.-....
5530.–
30
IE2
200 L
 1MB1531-2AB5.-....
6570.–
 1MB1631-2AB5.-....
7170.–
37
IE2
225 S
 1MB1531-2BB0.-....
7980.–
 1MB1631-2BB0.-....
8710.–
45
IE2
225 M
 1MB1531-2BB2.-....
9270.–
 1MB1631-2BB2.-....
10100.–
55
IE2
250 M
 1MB1531-2CB2.-....
11200.–
 1MB1631-2CB2.-....
12200.–
75
IE2
280 S
 1MB1531-2DB0.-....
15000.–
 1MB1631-2DB0.-....
15400.–
90
IE2
280 M
 1MB1531-2DB2.-....
17400.–
 1MB1631-2DB2.-....
17900.–
110
IE2
315 S
 1MB1531-3AB0.-....
21700.–
 1MB1631-3AB0.-....
22300.–
132
IE2
315 M
 1MB1531-3AB2.-....
25500.–
 1MB1631-3AB2.-....
26200.–
160
IE2
315 L
 1MB1531-3AB4.-....
30500.–
 1MB1631-3AB4.-....
31400.–
200
IE2
315 L
 1MB1531-3AB5.-....
37800.–
 1MB1631-3AB5.-....
38900.–
4/16
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 2 in type of protection Ex n (continued)
Series version
Cast-iron series 1MB1531 Basic Line, 1MB1631 Performance Line (continued)
with High Efficiency IE2
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6, 8
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
0.75 ... 200 kW
Synchronous speed at 50 Hz
750 ... 3600 rpm
Rated torque at 50 Hz
9.9 ... 1703 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
6-pole: 1000 rpm at 50 Hz
1.5
IE2
100 L
 1MB1531-1AC4.-....
1090.–
 1MB1631-1AC4.-....
1180.–
2.2
IE2
112 M
 1MB1531-1BC2.-....
1360.–
 1MB1631-1BC2.-....
1480.–
3
IE2
132 S
 1MB1531-1CC0.-....
1730.–
 1MB1631-1CC0.-....
1870.–
4
IE2
132 M
 1MB1531-1CC2.-....
2070.–
 1MB1631-1CC2.-....
2250.–
5.5
IE2
132 M
 1MB1531-1CC3.-....
2540.–
 1MB1631-1CC3.-....
2760.–
7.5
IE2
160 M
 1MB1531-1DC2.-....
3220.–
 1MB1631-1DC2.-....
3660.–
11
IE2
160 L
 1MB1531-1DC4.-....
4330.–
 1MB1631-1DC4.-....
4930.–
15
IE2
180 L
 1MB1531-1EC4.-....
5380.–
 1MB1631-1EC4.-....
5870.–
18.5
IE2
200 L
 1MB1531-2AC4.-....
6610.–
 1MB1631-2AC4.-....
7220.–
22
IE2
200 L
 1MB1531-2AC5.-....
7570.–
 1MB1631-2AC5.-....
8260.–
30
IE2
225 M
 1MB1531-2BC2.-....
10100.–
 1MB1631-2BC2.-....
11000.–
37
IE2
250 M
 1MB1531-2CC2.-....
12200.–
 1MB1631-2CC2.-....
13300.–
45
IE2
280 S
 1MB1531-2DC0.-....
14900.–
 1MB1631-2DC0.-....
15300.–
55
IE2
280 M
 1MB1531-2DC2.-....
17400.–
 1MB1631-2DC2.-....
17900.–
75
IE2
315 S
 1MB1531-3AC0.-....
23500.–
 1MB1631-3AC0.-....
24200.–
90
IE2
315 M
 1MB1531-3AC2.-....
26400.–
 1MB1631-3AC2.-....
27100.–
110
IE2
315 L
 1MB1531-3AC4.-....
31500.–
 1MB1631-3AC4.-....
32400.–
132
IE2
315 L
 1MB1531-3AC5.-....
37300.–
 1MB1631-3AC5.-....
38400.–
160
IE2
315 L
 1MB1531-3AC6.-....
45000.–
 1MB1631-3AC6.-....
46300.–
8-pole: 750 rpm at 50 Hz
0.75
100 L
 1MB1531-1AD4.-....
1200.–
 1MB1631-1AD4.-....
1310.–
1.1
100 L
 1MB1531-1AD5.-....
1470.–
 1MB1631-1AD5.-....
1600.–
1.5
112 M
 1MB1531-1BD2.-....
1750.–
 1MB1631-1BD2.-....
1910.–
2.2
132 S
 1MB1531-1CD0.-....
2260.–
 1MB1631-1CD0.-....
2470.–
3
132 M
 1MB1531-1CD2.-....
2700.–
 1MB1631-1CD2.-....
2960.–
4
160 M
 1MB1531-1DD2.-....
3340.–
 1MB1631-1DD2.-....
3790.–
5.5
160 M
 1MB1531-1DD3.-....
4030.–
 1MB1631-1DD3.-....
4580.–
7.5
160 L
 1MB1531-1DD4.-....
4800.–
 1MB1631-1DD4.-....
5470.–
11
180 L
 1MB1531-1ED4.-....
5710.–
 1MB1631-1ED4.-....
6240.–
15
200 L
 1MB1531-2AD5.-....
7530.–
 1MB1631-2AD5.-....
8230.–
18.5
225 S
 1MB1531-2BD0.-....
9140.–
 1MB1631-2BD0.-....
9980.–
22
225 M
 1MB1531-2BD2.-....
10300.–
 1MB1631-2BD2.-....
11300.–
30
250 M
 1MB1531-2CD2.-....
13300.–
 1MB1631-2CD2.-....
14600.–
37
280 S
 1MB1531-2DD0.-....
15900.–
 1MB1631-2DD0.-....
16400.–
45
280 M
 1MB1531-2DD2.-....
19200.–
 1MB1631-2DD2.-....
19800.–
55
315 S
 1MB1531-3AD0.-....
22700.–
 1MB1631-3AD0.-....
23400.–
75
315 M
 1MB1531-3AD2.-....
30100.–
 1MB1631-3AD2.-....
31000.–
90
315 L
 1MB1531-3AD4.-....
33300.–
 1MB1631-3AD4.-....
34400.–
110
315 L
 1MB1531-3AD5.-....
40000.–
 1MB1631-3AD5.-....
41200.–
132
315 L
 1MB1531-3AD6.-....
47500.–
 1MB1631-3AD6.-....
48900.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/17
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for Zone 21 in type of protection Ex tb
Series version
4
Cast-iron series 1MB1513 Basic Line, 1MB1613 Performance Line
with Premium Efficiency IE3
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
1.5 ... 200 kW
Synchronous speed at 50 Hz
1000 ... 3600 rpm
Rated torque at 50 Hz
10 ... 1542 Nm
Efficiency
Premium Efficiency IE3
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
2-pole: 3000 rpm at 50 Hz
3
IE3
100 L
 1MB1513-1AA4.-....
1370.–
 1MB1613-1AA4.-....
1520.–
4
IE3
112 M
 1MB1513-1BA2.-....
1620.–
 1MB1613-1BA2.-....
1790.–
5.5
IE3
132 S
 1MB1513-1CA0.-....
2010.–
 1MB1613-1CA0.-....
2240.–
7.5
IE3
132 S
 1MB1513-1CA1.-....
2490.–
 1MB1613-1CA1.-....
2770.–
11
IE3
160 M
 1MB1513-1DA2.-....
3430.–
 1MB1613-1DA2.-....
3830.–
15
IE3
160 M
 1MB1513-1DA3.-....
4360.–
 1MB1613-1DA3.-....
4870.–
18.5
IE3
160 L
 1MB1513-1DA4.-....
5130.–
 1MB1613-1DA4.-....
5740.–
22
IE3
180 M
 1MB1513-1EA2.-....
5850.–
 1MB1613-1EA2.-....
6310.–
30
IE3
200 L
 1MB1513-2AA4.-....
7760.–
 1MB1613-2AA4.-....
8360.–
37
IE3
200 L
 1MB1513-2AA5.-....
9520.–
 1MB1613-2AA5.-....
10300.–
45
IE3
225 M
 1MB1513-2BA2.-....
11300.–
 1MB1613-2BA2.-....
12200.–
55
IE3
250 M
 1MB1513-2CA2.-....
13600.–
 1MB1613-2CA2.-....
14600.–
75
IE3
280 S
 1MB1513-2DA0.-....
18400.–
 1MB1613-2DA0.-....
18800.–
90
IE3
280 M
 1MB1513-2DA2.-....
21300.–
 1MB1613-2DA2.-....
22100.–
110
IE3
315 S
 1MB1513-3AA0.-....
25500.–
 1MB1613-3AA0.-....
26600.–
132
IE3
315 M
 1MB1513-3AA2.-....
30100.–
 1MB1613-3AA2.-....
31400.–
160
IE3
315 L
 1MB1513-3AA4.-....
36800.–
 1MB1613-3AA4.-....
38400.–
200
IE3
315 L
 1MB1513-3AA5.-....
45400.–
 1MB1613-3AA5.-....
47400.–
4-pole: 1500 rpm at 50 Hz
2.2
IE3
100 L
 1MB1513-1AB4.-....
1260.–
 1MB1613-1AB4.-....
1400.–
3
IE3
100 L
 1MB1513-1AB5.-....
1430.–
 1MB1613-1AB5.-....
1590.–
4
IE3
112 M
 1MB1513-1BB2.-....
1720.–
 1MB1613-1BB2.-....
1920.–
5.5
IE3
132 S
 1MB1513-1CB0.-....
2150.–
 1MB1613-1CB0.-....
2400.–
7.5
IE3
132 M
 1MB1513-1CB2.-....
2660.–
 1MB1613-1CB2.-....
2970.–
11
IE3
160 M
 1MB1513-1DB2.-....
3510.–
 1MB1613-1DB2.-....
3910.–
15
IE3
160 L
 1MB1513-1DB4.-....
4420.–
 1MB1613-1DB4.-....
4950.–
18.5
IE3
180 M
 1MB1513-1EB2.-....
5050.–
 1MB1613-1EB2.-....
5440.–
22
IE3
180 L
 1MB1513-1EB4.-....
5770.–
 1MB1613-1EB4.-....
6230.–
30
IE3
200 L
 1MB1513-2AB5.-....
7660.–
 1MB1613-2AB5.-....
8250.–
37
IE3
225 S
 1MB1513-2BB0.-....
9300.–
 1MB1613-2BB0.-....
10000.–
45
IE3
225 M
 1MB1513-2BB2.-....
10700.–
 1MB1613-2BB2.-....
11600.–
55
IE3
250 M
 1MB1513-2CB2.-....
13100.–
 1MB1613-2CB2.-....
14200.–
75
IE3
280 S
 1MB1513-2DB0.-....
17400.–
 1MB1613-2DB0.-....
17900.–
90
IE3
280 M
 1MB1513-2DB2.-....
20100.–
 1MB1613-2DB2.-....
20600.–
110
IE3
315 S
 1MB1513-3AB0.-....
25000.–
 1MB1613-3AB0.-....
25500.–
132
IE3
315 M
 1MB1513-3AB2.-....
29100.–
 1MB1613-3AB2.-....
30000.–
160
IE3
315 L
 1MB1513-3AB4.-....
34800.–
 1MB1613-3AB4.-....
35600.–
200
IE3
315 L
 1MB1513-3AB5.-....
42600.–
 1MB1613-3AB5.-....
43700.–
4/18
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 21 in type of protection Ex tb (continued)
Series version
Cast-iron series 1MB1513 Basic Line, 1MB1613 Performance Line (continued)
with Premium Efficiency IE3
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
1.5 ... 200 kW
Synchronous speed at 50 Hz
1000 ... 3600 rpm
Rated torque at 50 Hz
10 ... 1542 Nm
Efficiency
Premium Efficiency IE3
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
6-pole: 1000 rpm at 50 Hz
1.5
IE3
100 L
 1MB1513-1AC4.-....
1240.–
 1MB1613-1AC4.-....
1390.–
2.2
IE3
112 M
 1MB1513-1BC2.-....
1560.–
 1MB1613-1BC2.-....
1730.–
3
IE3
132 S
 1MB1513-1CC0.-....
1960.–
 1MB1613-1CC0.-....
2180.–
4
IE3
132 M
 1MB1513-1CC2.-....
2340.–
 1MB1613-1CC2.-....
2600.–
5.5
IE3
132 M
 1MB1513-1CC3.-....
2870.–
 1MB1613-1CC3.-....
3200.–
7.5
IE3
160 M
 1MB1513-1DC2.-....
3670.–
 1MB1613-1DC2.-....
4090.–
11
IE3
160 L
 1MB1513-1DC4.-....
4910.–
 1MB1613-1DC4.-....
5510.–
15
IE3
180 L
 1MB1513-1EC4.-....
6130.–
 1MB1613-1EC4.-....
6610.–
18.5
IE3
200 L
 1MB1513-2AC4.-....
7710.–
 1MB1613-2AC4.-....
8300.–
22
IE3
200 L
 1MB1513-2AC5.-....
8780.–
 1MB1613-2AC5.-....
9470.–
30
IE3
225 M
 1MB1513-2BC2.-....
11600.–
 1MB1613-2BC2.-....
12500.–
37
IE3
250 M
 1MB1513-2CC2.-....
14200.–
 1MB1613-2CC2.-....
15300.–
45
IE3
280 S
 1MB1513-2DC0.-....
17300.–
 1MB1613-2DC0.-....
17800.–
55
IE3
280 M
 1MB1513-2DC2.-....
20100.–
 1MB1613-2DC2.-....
20600.–
75
IE3
315 S
 1MB1513-3AC0.-....
27000.–
 1MB1613-3AC0.-....
27600.–
90
IE3
315 M
 1MB1513-3AC2.-....
30100.–
 1MB1613-3AC2.-....
30900.–
110
IE3
315 L
 1MB1513-3AC4.-....
35800.–
 1MB1613-3AC4.-....
36700.–
132
IE3
315 L
 1MB1513-3AC5.-....
42100.–
 1MB1613-3AC5.-....
43200.–
160
IE3
315 L
 1MB1513-3AC6.-....
50600.–
 1MB1613-3AC6.-....
51900.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/19
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for Zone 22 in type of protection Ex tc
Series version
4
Cast-iron series 1MB1523 Basic Line, 1MB1623 Performance Line
with Premium Efficiency IE3
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
1.5 ... 200 kW
Synchronous speed at 50 Hz
1000 ... 3600 rpm
Rated torque at 50 Hz
10 ... 1542 Nm
Efficiency
Premium Efficiency IE3
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
2-pole: 3000 rpm at 50 Hz
3
IE3
100 L
 1MB1523-1AA4.-....
1260.–
 1MB1623-1AA4.-....
1410.–
4
IE3
112 M
 1MB1523-1BA2.-....
1500.–
 1MB1623-1BA2.-....
1680.–
5.5
IE3
132 S
 1MB1523-1CA0.-....
1900.–
 1MB1623-1CA0.-....
2130.–
7.5
IE3
132 S
 1MB1523-1CA1.-....
2380.–
 1MB1623-1CA1.-....
2660.–
11
IE3
160 M
 1MB1523-1DA2.-....
3290.–
 1MB1623-1DA2.-....
3690.–
15
IE3
160 M
 1MB1523-1DA3.-....
4220.–
 1MB1623-1DA3.-....
4730.–
18.5
IE3
160 L
 1MB1523-1DA4.-....
4980.–
 1MB1623-1DA4.-....
5600.–
22
IE3
180 M
 1MB1523-1EA2.-....
5730.–
 1MB1623-1EA2.-....
6190.–
30
IE3
200 L
 1MB1523-2AA4.-....
7510.–
 1MB1623-2AA4.-....
8110.–
37
IE3
200 L
 1MB1523-2AA5.-....
9260.–
 1MB1623-2AA5.-....
10000.–
45
IE3
225 M
 1MB1523-2BA2.-....
10900.–
 1MB1623-2BA2.-....
11800.–
55
IE3
250 M
 1MB1523-2CA2.-....
13000.–
 1MB1623-2CA2.-....
14000.–
75
IE3
280 S
 1MB1523-2DA0.-....
17500.–
 1MB1623-2DA0.-....
17900.–
90
IE3
280 M
 1MB1523-2DA2.-....
20500.–
 1MB1623-2DA2.-....
21300.–
110
IE3
315 S
 1MB1523-3AA0.-....
24400.–
 1MB1623-3AA0.-....
25500.–
132
IE3
315 M
 1MB1523-3AA2.-....
29000.–
 1MB1623-3AA2.-....
30300.–
160
IE3
315 L
 1MB1523-3AA4.-....
35700.–
 1MB1623-3AA4.-....
37400.–
200
IE3
315 L
 1MB1523-3AA5.-....
44300.–
 1MB1623-3AA5.-....
46300.–
4-pole: 1500 rpm at 50 Hz
2.2
IE3
100 L
 1MB1523-1AB4.-....
1170.–
 1MB1623-1AB4.-....
1290.–
3
IE3
100 L
 1MB1523-1AB5.-....
1320.–
 1MB1623-1AB5.-....
1480.–
4
IE3
112 M
 1MB1523-1BB2.-....
1610.–
 1MB1623-1BB2.-....
1800.–
5.5
IE3
132 S
 1MB1523-1CB0.-....
2040.–
 1MB1623-1CB0.-....
2290.–
7.5
IE3
132 M
 1MB1523-1CB2.-....
2550.–
 1MB1623-1CB2.-....
2860.–
11
IE3
160 M
 1MB1523-1DB2.-....
3370.–
 1MB1623-1DB2.-....
3770.–
15
IE3
160 L
 1MB1523-1DB4.-....
4280.–
 1MB1623-1DB4.-....
4810.–
18.5
IE3
180 M
 1MB1523-1EB2.-....
4930.–
 1MB1623-1EB2.-....
5320.–
22
IE3
180 L
 1MB1523-1EB4.-....
5650.–
 1MB1623-1EB4.-....
6110.–
30
IE3
200 L
 1MB1523-2AB5.-....
7410.–
 1MB1623-2AB5.-....
8000.–
37
IE3
225 S
 1MB1523-2BB0.-....
8860.–
 1MB1623-2BB0.-....
9600.–
45
IE3
225 M
 1MB1523-2BB2.-....
10300.–
 1MB1623-2BB2.-....
11200.–
55
IE3
250 M
 1MB1523-2CB2.-....
12500.–
 1MB1623-2CB2.-....
13600.–
75
IE3
280 S
 1MB1523-2DB0.-....
16600.–
 1MB1623-2DB0.-....
17000.–
90
IE3
280 M
 1MB1523-2DB2.-....
19300.–
 1MB1623-2DB2.-....
19800.–
110
IE3
315 S
 1MB1523-3AB0.-....
23900.–
 1MB1623-3AB0.-....
24400.–
132
IE3
315 M
 1MB1523-3AB2.-....
28100.–
 1MB1623-3AB2.-....
28900.–
160
IE3
315 L
 1MB1523-3AB4.-....
33700.–
 1MB1623-3AB4.-....
34500.–
200
IE2
315 L
 1MB1523-3AB5.-....
41500.–
 1MB1623-3AB5.-....
42700.–
4/20
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 22 in type of protection Ex tc (continued)
Series version
Cast-iron series 1MB1523 Basic Line, 1MB1623 Performance Line (continued)
with Premium Efficiency IE3
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
1.5 ... 200 kW
Synchronous speed at 50 Hz
1000 ... 3600 rpm
Rated torque at 50 Hz
10 ... 1542 Nm
Efficiency
Premium Efficiency IE3
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
6-pole: 1000 rpm at 50 Hz
1.5
IE3
100 L
 1MB1523-1AC4.-....
1150.–
 1MB1623-1AC4.-....
1280.–
2.2
IE3
112 M
 1MB1523-1BC2.-....
1440.–
 1MB1623-1BC2.-....
1620.–
3
IE3
132 S
 1MB1523-1CC0.-....
1850.–
 1MB1623-1CC0.-....
2070.–
4
IE3
132 M
 1MB1523-1CC2.-....
2220.–
 1MB1623-1CC2.-....
2490.–
5.5
IE3
132 M
 1MB1523-1CC3.-....
2760.–
 1MB1623-1CC3.-....
3090.–
7.5
IE3
160 M
 1MB1523-1DC2.-....
3520.–
 1MB1623-1DC2.-....
3940.–
11
IE3
160 L
 1MB1523-1DC4.-....
4770.–
 1MB1623-1DC4.-....
5360.–
15
IE3
180 L
 1MB1523-1EC4.-....
6010.–
 1MB1623-1EC4.-....
6490.–
18.5
IE3
200 L
 1MB1523-2AC4.-....
7460.–
 1MB1623-2AC4.-....
8050.–
22
IE3
200 L
 1MB1523-2AC5.-....
8530.–
 1MB1623-2AC5.-....
9220.–
30
IE3
225 M
 1MB1523-2BC2.-....
11200.–
 1MB1623-2BC2.-....
12100.–
37
IE3
250 M
 1MB1523-2CC2.-....
13600.–
 1MB1623-2CC2.-....
14700.–
45
IE3
280 S
 1MB1523-2DC0.-....
16500.–
 1MB1623-2DC0.-....
16900.–
55
IE3
280 M
 1MB1523-2DC2.-....
19300.–
 1MB1623-2DC2.-....
19800.–
75
IE3
315 S
 1MB1523-3AC0.-....
25900.–
 1MB1623-3AC0.-....
26500.–
90
IE3
315 M
 1MB1523-3AC2.-....
29000.–
 1MB1623-3AC2.-....
29800.–
110
IE3
315 L
 1MB1523-3AC4.-....
34700.–
 1MB1623-3AC4.-....
35600.–
132
IE3
315 L
 1MB1523-3AC5.-....
41000.–
 1MB1623-3AC5.-....
42100.–
160
IE2
315 L
 1MB1523-3AC6.-....
49500.–
 1MB1623-3AC6.-....
50800.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/21
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
10
20
On
request
■ Overview (continued)
Category
Motors for Zone 2 in type of protection Ex n
Series version
4
Cast-iron series 1MB1533 Basic Line, 1MB1633 Performance Line
with Premium Efficiency IE3
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
1.5 ... 200 kW
Synchronous speed at 50 Hz
1000 ... 3600 rpm
Rated torque at 50 Hz
10 ... 1542 Nm
Efficiency
Premium Efficiency IE3
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
2-pole: 3000 rpm at 50 Hz
3
IE3
100 L
 1MB1533-1AA4.-....
1320.–
 1MB1633-1AA4.-....
1470.–
4
IE3
112 M
 1MB1533-1BA2.-....
1570.–
 1MB1633-1BA2.-....
1750.–
5.5
IE3
132 S
 1MB1533-1CA0.-....
1960.–
 1MB1633-1CA0.-....
2190.–
7.5
IE3
132 S
 1MB1533-1CA1.-....
2440.–
 1MB1633-1CA1.-....
2720.–
11
IE3
160 M
 1MB1533-1DA2.-....
3350.–
 1MB1633-1DA2.-....
3750.–
15
IE3
160 M
 1MB1533-1DA3.-....
4280.–
 1MB1633-1DA3.-....
4790.–
18.5
IE3
160 L
 1MB1533-1DA4.-....
5040.–
 1MB1633-1DA4.-....
5650.–
22
IE3
180 M
 1MB1533-1EA2.-....
5710.–
 1MB1633-1EA2.-....
6170.–
30
IE3
200 L
 1MB1533-2AA4.-....
7420.–
 1MB1633-2AA4.-....
8020.–
37
IE3
200 L
 1MB1533-2AA5.-....
9170.–
 1MB1633-2AA5.-....
9900.–
45
IE3
225 M
 1MB1533-2BA2.-....
10700.–
 1MB1633-2BA2.-....
11600.–
55
IE3
250 M
 1MB1533-2CA2.-....
12800.–
 1MB1633-2CA2.-....
13800.–
75
IE3
280 S
 1MB1533-2DA0.-....
17300.–
 1MB1633-2DA0.-....
17700.–
90
IE3
280 M
 1MB1533-2DA2.-....
20300.–
 1MB1633-2DA2.-....
21100.–
110
IE3
315 S
 1MB1533-3AA0.-....
24300.–
 1MB1633-3AA0.-....
25400.–
132
IE3
315 M
 1MB1533-3AA2.-....
28800.–
 1MB1633-3AA2.-....
30200.–
160
IE3
315 L
 1MB1533-3AA4.-....
35600.–
 1MB1633-3AA4.-....
37200.–
200
IE3
315 L
 1MB1533-3AA5.-....
44100.–
 1MB1633-3AA5.-....
46200.–
4-pole: 1500 rpm at 50 Hz
2.2
IE3
100 L
 1MB1533-1AB4.-....
1220.–
 1MB1633-1AB4.-....
1350.–
3
IE3
100 L
 1MB1533-1AB5.-....
1380.–
 1MB1633-1AB5.-....
1540.–
4
IE3
112 M
 1MB1533-1BB2.-....
1680.–
 1MB1633-1BB2.-....
1870.–
5.5
IE3
132 S
 1MB1533-1CB0.-....
2100.–
 1MB1633-1CB0.-....
2350.–
7.5
IE3
132 M
 1MB1533-1CB2.-....
2610.–
 1MB1633-1CB2.-....
2920.–
11
IE3
160 M
 1MB1533-1DB2.-....
3430.–
 1MB1633-1DB2.-....
3830.–
15
IE3
160 L
 1MB1533-1DB4.-....
4340.–
 1MB1633-1DB4.-....
4870.–
18.5
IE3
180 M
 1MB1533-1EB2.-....
4920.–
 1MB1633-1EB2.-....
5310.–
22
IE3
180 L
 1MB1533-1EB4.-....
5640.–
 1MB1633-1EB4.-....
6100.–
30
IE3
200 L
 1MB1533-2AB5.-....
7320.–
 1MB1633-2AB5.-....
7910.–
37
IE3
225 S
 1MB1533-2BB0.-....
8710.–
 1MB1633-2BB0.-....
9440.–
45
IE3
225 M
 1MB1533-2BB2.-....
10100.–
 1MB1633-2BB2.-....
11000.–
55
IE3
250 M
 1MB1533-2CB2.-....
12300.–
 1MB1633-2CB2.-....
13400.–
75
IE3
280 S
 1MB1533-2DB0.-....
16400.–
 1MB1633-2DB0.-....
16800.–
90
IE3
280 M
 1MB1533-2DB2.-....
19100.–
 1MB1633-2DB2.-....
19600.–
110
IE3
315 S
 1MB1533-3AB0.-....
23700.–
 1MB1633-3AB0.-....
24300.–
132
IE3
315 M
 1MB1533-3AB2.-....
27900.–
 1MB1633-3AB2.-....
28700.–
160
IE3
315 L
 1MB1533-3AB4.-....
33500.–
 1MB1633-3AB4.-....
34400.–
200
IE3
315 L
 1MB1533-3AB5.-....
41400.–
 1MB1633-3AB5.-....
42500.–
4/22
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Orientation
Standard delivery times in working days:
10
20
On
request
Overview of selection and ordering data
with base prices and standard delivery times
■ Overview (continued)
Category
Motors for Zone 2 in type of protection Ex n (continued)
Series version
Cast-iron series 1MB1533 Basic Line, 1MB1633 Performance Line (continued)
with Premium Efficiency IE3
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class 155 (F)
Utilization
Thermal class 130 (B)
Number of poles
2, 4, 6
Frame sizes (FS)
100 L ... 315 L
Rated output at 50 Hz
1.5 ... 200 kW
Synchronous speed at 50 Hz
1000 ... 3600 rpm
Rated torque at 50 Hz
10 ... 1542 Nm
Efficiency
Premium Efficiency IE3
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3
(for article number supplements and special versions see from Page 4/24, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base price
Article No.
Base price
class
size
50 Hz
Basic Line
Performance Line
kW
FS
 New
EUR
 New
EUR
6-pole: 1000 rpm at 50 Hz
1.5
IE3
100 L
 1MB1533-1AC4.-....
1200.–
 1MB1633-1AC4.-....
1340.–
2.2
IE3
112 M
 1MB1533-1BC2.-....
1510.–
 1MB1633-1BC2.-....
1690.–
3
IE3
132 S
 1MB1533-1CC0.-....
1910.–
 1MB1633-1CC0.-....
2130.–
4
IE3
132 M
 1MB1533-1CC2.-....
2290.–
 1MB1633-1CC2.-....
2550.–
5.5
IE3
132 M
 1MB1533-1CC3.-....
2820.–
 1MB1633-1CC3.-....
3150.–
7.5
IE3
160 M
 1MB1533-1DC2.-....
3580.–
 1MB1633-1DC2.-....
4000.–
11
IE3
160 L
 1MB1533-1DC4.-....
4830.–
 1MB1633-1DC4.-....
5420.–
15
IE3
180 L
 1MB1533-1EC4.-....
6000.–
 1MB1633-1EC4.-....
6480.–
18.5
IE3
200 L
 1MB1533-2AC4.-....
7370.–
 1MB1633-2AC4.-....
7960.–
22
IE3
200 L
 1MB1533-2AC5.-....
8440.–
 1MB1633-2AC5.-....
9120.–
30
IE3
225 M
 1MB1533-2BC2.-....
11000.–
 1MB1633-2BC2.-....
11900.–
37
IE3
250 M
 1MB1533-2CC2.-....
13400.–
 1MB1633-2CC2.-....
14500.–
45
IE3
280 S
 1MB1533-2DC0.-....
16300.–
 1MB1633-2DC0.-....
16700.–
55
IE3
280 M
 1MB1533-2DC2.-....
19100.–
 1MB1633-2DC2.-....
19600.–
75
IE3
315 S
 1MB1533-3AC0.-....
25800.–
 1MB1633-3AC0.-....
26400.–
90
IE3
315 M
 1MB1533-3AC2.-....
28800.–
 1MB1633-3AC2.-....
29700.–
110
IE3
315 L
 1MB1533-3AC4.-....
34600.–
 1MB1633-3AC4.-....
35500.–
132
IE3
315 L
 1MB1533-3AC5.-....
40900.–
 1MB1633-3AC5.-....
42000.–
160
IE3
315 L
 1MB1533-3AC6.-....
49400.–
 1MB1633-3AC6.-....
50700.–
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/23
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Voltages
Aluminum series 1MB10
10
20
30
On
request
■ Selection and ordering data
Voltages
4
Voltage
code
12th and
13th
position
of the
Article
No.
1MB10 . . - . . . . ■ - ■ . . .
Voltage at 50 Hz and 60 Hz (50 Hz output)
50 Hz 230 VΔ/400 VY, 60 Hz 460 VY
2 2
50 Hz 400 VΔ/690 VY, 60 Hz 460 VΔ
3 4
50 Hz 500 VY
2 7
50 Hz 500 VΔ
4 0
50 Hz 220 VΔ/380 VY, 60 Hz 440 VY
2 1
50 Hz 380 VΔ/660 VY, 60 Hz 440 VΔ
3 3
50 Hz 240 VΔ/415 VY, 60 Hz 480 VY
2 3
50 Hz 415 VΔ, 60 Hz 480 VΔ
3 5
400 VY
0 2
400 VΔ
0 4
Voltage at 60 Hz (50 Hz output)
220 VΔ/380 VY; 50 Hz output 1)
9 0
220 VΔ/380 VY; 60 Hz output
9 0
380 VΔ/660 VY; 50 Hz output 1)
9 0
380 VΔ/660 VY; 60 Hz output
9 0
440 VY; 50 Hz output 1)
9 0
440 VY; 60 Hz output
9 0
440 VΔ; 50 Hz output 1)
9 0
440 VΔ; 60 Hz output
9 0
460 VY; 50 Hz output 1)
9 0
460 VY; 60 Hz output
9 0
460 VΔ; 50 Hz output 1)
9 0
460 VΔ; 60 Hz output
9 0
575 VY; 50 Hz output 1)
9 0
575 VY; 60 Hz output
9 0
575 VΔ; 50 Hz output 1)
9 0
575 VΔ; 60 Hz output
9 0
Non-standard voltage and/or frequencies
Non-standard winding 2)
9 0


•
1)
Additional
identification code
with order
code and
plain text
if required
Motor category
Motor
version
Motor
type
(alum.)
1MB10.2
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
Order
code
Ex t (Zone 21/22)
Ex n (Zone 2)
IE1 Standard
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE2 High
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE3 Premium
Efficiency
Motor
version
–
–
–
–
–
–
–
–
–
–
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all












–
35.30
35.30
35.30
35.30



–
41.40
41.40
41.40
41.40




51.40
51.40
51.40
51.40




62.10
62.10
62.10
62.10




79.70
79.70
79.70
79.70




97.80
97.80
97.80
97.80


M2A
M1A
M2B
M1B
M2C
M1C
M2D
M1D
M2E
M1E
M2F
M1F
M2G
M1G
M2H
M1H
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
35.30
35.30
35.30
35.30
35.30
35.30
35.30
35.30
35.30

35.30

35.30
35.30
35.30
35.30
41.40
41.40
41.40
41.40
41.40
41.40
41.40
41.40
41.40

41.40

41.40
41.40
41.40
41.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40

51.40

51.40
51.40
51.40
51.40
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10
62.10

62.10

62.10
62.10
62.10
62.10
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70
79.70

79.70

79.70
79.70
79.70
79.70
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80
97.80

97.80

97.80
97.80
97.80
97.80
M1Y • and all
identification code
all
70.80
83.30
103.–
125.–
159.–
198.–
1MB10.2
1MB10.1
1MB10.1
1MB10.3
1MB10.3
Motor
type
Frame size
80
90
100
112
132
160

Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
For versions 1MB1... - 1BA2, 1MB1... - 1BB2, 1MB1... - 1CC2,
1MB1... - 1DD2, an output of 3.7 kW will be stamped on the rating plate
in accordance with the international efficiency marking according to
IEC 60034-30 at 60 Hz with 50 Hz output.
4/24
Siemens D 81.1 P · 03/2015
2)
Plain text must be specified in the order: Voltage between 200 and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
30
On
request
Voltages
Cast-iron series 1MB15 Basic Line, 1MB16 Performance Line
■ Selection and ordering data
Voltages
Voltage
code
12th and
13th
position
of the
Article
No.
Additional
identification code
with order
code and
plain text
if required
Order
1MB15/6 . . - . . . . ■ - ■ . . . code
Voltage at 50 Hz and 60 Hz
50 Hz 230 VΔ/400 VY,
2 2
–
60 Hz 460 VY
50 Hz 400 VΔ/690 VY,
3 4
–
60 Hz 460 VΔ
50 Hz 500 VY
2 7
–
50 Hz 500 VΔ
4 0
–
50 Hz 220 VΔ/380 VY
2 1
–
60 Hz 440 VY
3 3
–
50 Hz 380 VΔ/660 VY
60 Hz 440 VΔ
2 3
–
50 Hz 240 VΔ/415 VY,
60 Hz 480 VY
–
50 Hz 415 VΔ, 60 Hz 480 VΔ 3 5
50 Hz 400 VY
0 2
–
50 Hz 400 VΔ
0 4
–
Voltage at 60 Hz and required output
220 VΔ/380 VY;
9 0
M2A
50 Hz output 1)
220 VΔ/380 VY;
9 0
M1A
60 Hz output
380 VΔ/660 VY;
9 0
M2B
50 Hz output 1)
380 VΔ/660 VY;
9 0
M1B
60 Hz output
440 VY; 50 Hz output 1)
9 0
M2C
440 VY; 60 Hz output
9 0
M1C
440 VΔ; 50 Hz output 1)
9 0
M2D
440 VΔ; 60 Hz output
9 0
M1D
460 VY; 50 Hz output 1)
9 0
M2E
460 VY; 60 Hz output
9 0
M1E
460 VΔ; 50 Hz output 1)
9 0
M2F
460 VΔ; 60 Hz output
9 0
M1F
575 VY; 50 Hz output 1)
9 0
M2G
575 VY; 60 Hz output
9 0
M1G
575 VΔ; 50 Hz output 1)
9 0
M2H
575 VY; 60 Hz output
9 0
M1H
Non-standard voltage and/or frequencies
Non-standard winding 2)
9 0
M1Y • and
identification code


•
1)
Motor category
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(cast-iron) 100
112
132
160
180
200
225
250
280
315
Ex t (Zone 21/22) 1MB15.1
1MB15.1
Ex n (Zone 2)
1MB16.1
1MB16.1
IE2 High
Efficiency
Ex t (Zone 21/22) 1MB15.3
1MB15.1
Ex n (Zone 2)
1MB16.3
1MB16.1
IE3 Premium
Efficiency
Motor
Motor
Frame size
version
type
100
112
132
160
180
200
225
250
280
315
all
all










all
all










all
all
all
all
all
all




















51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
all
all
all
all
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–




















all
all
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
51.40 62.10 79.70 97.80 132.– 151.– 205.– 234.– 302.– 392.–
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
51.40
51.40
51.40
51.40
51.40

51.40

51.40
51.40
51.40
51.40
all
all
103.– 125.– 159.– 198.– 255.– 311.– 460.– 580.– 742.– 964.–
62.10
62.10
62.10
62.10
62.10

62.10

62.10
62.10
62.10
62.10
79.70
79.70
79.70
79.70
79.70

79.70

79.70
79.70
79.70
79.70
97.80
97.80
97.80
97.80
97.80

97.80

97.80
97.80
97.80
97.80
132.–
132.–
132.–
132.–
132.–

132.–

132.–
132.–
132.–
132.–
151.–
151.–
151.–
151.–
151.–

151.–

151.–
151.–
151.–
151.–
205.–
205.–
205.–
205.–
205.–

205.–

205.–
205.–
205.–
205.–
234.–
234.–
234.–
234.–
234.–

234.–

234.–
234.–
234.–
234.–
302.–
302.–
302.–
302.–
302.–

302.–

302.–
302.–
302.–
302.–
392.–
392.–
392.–
392.–
392.–

392.–

392.–
392.–
392.–
392.–
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
For versions 1MB1... - 1BA2, 1MB1... - 1BB2, 1MB1... - 1CC2,
1MB1... - 1DD2, an output of 3.7 kW will be stamped on the rating plate
in accordance with the international efficiency marking according to
IEC 60034-30 at 60 Hz with 50 Hz output.
Recommended retail prices plus metal surcharges (MS)
2)
Plain text must be specified in the order: Voltage between 200 and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
Siemens D 81.1 P · 03/2015
4/25
4
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Voltages
Aluminum series 1MA7
10
20
30
On
request
■ Selection and ordering data
Voltages
Voltage
code
11th
position
of the
Article
No.
Additional
identification code
with order
code and
plain text
if required
1MA7 . . . - . . . ■ .
Order code
Voltage at 50 Hz and 50 Hz output
230 VΔ/400 VY
1
–
400 VΔ/690 VY
6
–
500 VY 1)
3
–
500 VΔ
5
–
220 VΔ/380 VY
9
L1R
230 VΔ
9
L1E
380 VΔ/660 VY
9
L1L
415 VY 1)
9
L1C
415 VΔ
9
L1D
Voltage at 60 Hz and required output at 60 Hz 2)
220 VΔ/380 VY; 50 Hz output
9
L2A
380 VΔ/660 VY; 50 Hz output 3)
9
L2C
440 VY; 50 Hz output
9
L2Q
440 VΔ; 50 Hz output
9
L2R
460 VY; 50 Hz output 1)
9
L2S
460 VΔ; 50 Hz output
9
L2T
575 VY; 50 Hz output 3)
9
L2U
575 VΔ; 50 Hz output
9
L2V
Non-standard voltage and/or frequencies
Non-standard winding 4)
9
L1Y • and
identification code


4
•
–
Motor category
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor
Motor type Motor type – Frame size
version
(alum.)
63
71
80
90
100
112
132
Zone 1 Ex e II. 1MA7
1MA7
Motor
Motor
Frame size
version
type
160
63
71
80
90
100
112
132
160
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all








–

–
28.70

–
28.70
28.70








–
33.50

33.50
33.50
33.50

–
38.–

38.–
38.–
38.–

–
44.60

44.60
44.60
44.60


55.50

55.50
55.50
55.50


67.–

67.–
67.–
67.–


85.70

85.70
85.70
85.70


106.–

106.–
106.–
106.–
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
28.70
28.70
28.70
–
28.70
–
28.70
–
33.50
33.50
33.50
33.50
33.50
33.50
33.50
33.50
38.–
38.–
38.–
38.–
38.–
38.–
38.–
38.–
44.60
44.60
44.60
44.60
44.60
44.60
44.60
44.60
55.50
55.50
55.50
55.50
55.50
55.50
55.50
55.50
67.–
67.–
67.–
67.–
67.–
67.–
67.–
67.–
85.70
85.70
85.70
85.70
85.70
85.70
85.70
85.70
106.–
106.–
106.–
106.–
106.–
106.–
106.–
106.–
all
all
57.20
67.10
76.10
89.20
111.–
134.–
171.–
211.–
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
Not possible
1)
Not possible for 1MA7 060-4 motors (motor series 1MA7 frame size 63
4-pole) not possible.
2)
Special certification is required for 60 Hz.
3)
Not possible for motors 1MA7 060-2, 1MA7 060-4 and 1MA7 063-4
(motor series 1MA7 frame size 63, 2-pole and 4-pole).
4/26
Siemens D 81.1 P · 03/2015
4)
Plain text must be specified in the order: Voltage between 200 V and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
30
On
request
Voltages
Cast-iron series 1MA6
■ Selection and ordering data
Voltages
Voltage
code
11th
position
of the
Article
No.
Additional
identification code
with order
code and
plain text
if required
Order
1MA6 . . . - . . . ■ .
code
Voltage at 50 Hz and 50 Hz output
230 VΔ/400 VY 1)
1
–
400 VΔ/690 VY
6
–
500 VY
3
–
500 VΔ
5
–
220 VΔ/380 VY
9
L1R
230 VΔ
9
L1E
380 VΔ/660 VY
9
L1L
415 VY
9
L1C
415 VΔ
9
L1D
Voltage at 60 Hz and required output at 60 Hz 2)
220 VΔ/380 VY; 50 Hz output
9
L2A
380 VΔ/660 VY; 50 Hz output
9
L2C
440 VY; 50 Hz output
9
L2Q
440 VΔ; 50 Hz output
9
L2R
460 VY; 50 Hz output
9
L2S
460 VΔ; 50 Hz output
9
L2T
575 VY; 50 Hz output
9
L2U
575 VΔ; 50 Hz output
9
L2V
Non-standard voltage and/or frequencies
Non-standard winding 3)
9
L1Y • and
identification code


•
–
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
Motor type Motor type – Frame size
version
(cast-iron) 100
112
132
160
180
200
225
250
280
315
Zone 1 Ex e II. 1MA6
1MA6
Motor
Motor
Frame size
version
type
100
112
132
160
180
200
225
250
280
315
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all






















55.50

55.50
55.50
55.50


67.–

67.–
67.–
67.–


85.70

85.70
85.70
85.70


106.–

106.–
106.–
106.–


137.–

137.–
137.–
137.–


157.–

157.–
157.–
157.–


219.–

219.–
219.–
219.–


253.–

253.–
253.–
253.–


323.–

323.–
323.–
323.–


–
–
419.–
–
419.–
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
55.50
55.50
55.50
55.50
55.50
55.50
55.50
55.50
67.–
67.–
67.–
67.–
67.–
67.–
67.–
67.–
85.70
85.70
85.70
85.70
85.70
85.70
85.70
85.70
106.–
106.–
106.–
106.–
106.–
106.–
106.–
106.–
137.–
137.–
137.–
137.–
137.–
137.–
137.–
137.–
157.–
157.–
157.–
157.–




219.–
219.–
219.–
219.–




253.–
253.–
253.–
253.–




323.–
323.–
323.–
323.–




–
419.–
–
419.–
–

–

all
all
111.– 134.– 171.– 211.– 275.– 336.– 496.– 626.– 802.– 1040.–
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
Not possible
1)
Not possible for 1MA6 motors in frame size 315 L.
2)
Special certification is required for 60 Hz.
Recommended retail prices plus metal surcharges (MS)
4
3)
Plain text must be specified in the order: Voltage between 200 V and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
Siemens D 81.1 P · 03/2015
4/27
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Voltages
Aluminum series 1LA5, 1LA7, 1LA9
10
20
30
On
request
■ Selection and ordering data
Voltages
4
Voltage
code
11th
position
of the
Article
No.
1LA . . . . - . . . ■ .
Voltage at 50 Hz and 60 Hz
50 Hz 230 VΔ/400 VY,
1
60 Hz 460 VY
50 Hz 400 VΔ/690 VY,
6
60 Hz 460 VΔ
Voltage at 50 Hz and 50 Hz output
500 VY
3
500 VΔ
5
220 VΔ/380 VY
9
(440 VY at 60 Hz)
230 VΔ
9
380 VΔ/660 VY
9
(440 VΔ at 60 Hz)
415 VY
9
415 VΔ
9
400 VY
9
400 VΔ
9
400 VΔ
9
(460 VΔ at 60 Hz)
Voltage at 87 Hz and 87 Hz output
400 VΔ 2)
9
Additional
identification code
with order
code and
plain text
if required
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Order code version
•
–
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type
63
71
80
90
100 112 132 160 180 200 225
(alum.)
1LA7
1LA7 $
1LA5 % 1)
1LA9
1LA9 &
1LA9
1LA9 (
Motor
type
Frame size
63
71
80
90
100
112
132
160
180
200
225
–
all
all











–
all
all











–
–
L1R
all
all
all
all
all
all











–
–
–
–







27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.– 132.– 152.– 213.–
L1E
L1L
all
all
all
all











27.80 32.40 36.70 43.10 53.50 64.60 82.90 102.– 132.– 152.– 213.–
L1C
L1D
L1A
L1B
L1U
all
all
all
all
all
all
all
all
all
all
27.80
27.80



L3A
all; for $ and %
26.70 31.20 35.30 41.40 51.40 62.10 79.70 97.80 127.– 146.– 
without additional charge
Voltage at 60 Hz and required output at 60 Hz
220 VΔ/380 VY; 50 Hz output
9
L2A
220 VΔ/380 VY; 60 Hz output
9
L2B
380 VΔ/660 VY; 50 Hz output
9
L2C
380 VΔ/660 VY; 60 Hz output
9
L2D
440 VY; 50 Hz output
9
L2Q
440 VY; 60 Hz output
9
L2W
440 VΔ; 50 Hz output
9
L2R
440 VΔ; 60 Hz output
9
L2X
460 VY; 50 Hz output
9
L2S
460 VY; 60 Hz output
9
L2E
460 VΔ; 50 Hz output
9
L2T
460 VΔ; 60 Hz output
9
L2F
575 VY; 50 Hz output
9
L2U
575 VY; 60 Hz output
9
L2L
575 VΔ; 50 Hz output
9
L2V
575 VΔ; 60 Hz output
9
L2M
Non-standard voltage and/or frequencies
Non-standard winding 3)
9
L1Y • and
identification code


Motor category
Motor
version
32.40
32.40



32.40
32.40
32.40
32.40
32.40
32.40
32.40
32.40
32.40

32.40

32.40
32.40
32.40
32.40
36.70
36.70



36.70
36.70
36.70
36.70
36.70
36.70
36.70
36.70
36.70

36.70

36.70
36.70
36.70
36.70
43.10
43.10



43.10
43.10
43.10
43.10
43.10
43.10
43.10
43.10
43.10

43.10

43.10
43.10
43.10
43.10
53.50
53.50



53.50
53.50
53.50
53.50
53.50
53.50
53.50
53.50
53.50

53.50

53.50
53.50
53.50
53.50
64.60
64.60



64.60
64.60
64.60
64.60
64.60
64.60
64.60
64.60
64.60

64.60

64.60
64.60
64.60
64.60
82.90
82.90



82.90
82.90
82.90
82.90
82.90
82.90
82.90
82.90
82.90

82.90

82.90
82.90
82.90
82.90
102.–
102.–



102.–
102.–
102.–
102.–
102.–
102.–
102.–
102.–
102.–

102.–

102.–
102.–
102.–
102.–
132.–
132.–



132.–
132.–
132.–
132.–
132.–
132.–
132.–
132.–
132.–

132.–

132.–
132.–
132.–
132.–
152.–
152.–



152.–
152.–
152.–
152.–
152.–
152.–
152.–
152.–
152.–

152.–

152.–
152.–
152.–
152.–
213.–
213.–



all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
27.80
27.80
27.80
27.80
27.80
27.80
27.80
27.80
27.80

27.80

27.80
27.80
27.80
27.80
213.–
213.–
213.–
213.–
213.–
213.–
213.–
213.–
213.–

213.–

213.–
213.–
213.–
213.–
all
all
55.20 64.90 73.60 86.60 107.– 130.– 165.– 206.– 265.– 323.– 478.–
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
Not possible
1)
Zone 2 is not possible for motor series 1LA5.
2)
Only possible for 4-pole, 6-pole and 8-pole motors. The operating data
for converter-fed operation is also provided in a table on the rating plate.
Only possible in combination with order codes M38, M39, M73 and M75.
For motors 1LA5 and 1LA7 without additional charge.
4/28
Siemens D 81.1 P · 03/2015
3)
Plain text must be specified in the order: Voltage between 200 V and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
30
On
request
Voltages
Cast-iron series 1LA6, 1LG4, 1LG6
■ Selection and ordering data
Voltages
Voltage
code
11th
position
of the
Article
No.
Additional
identification code
with order
code and
plain text
if required
1L . . . . . - . . . ■ .
Order code
Voltage at 50 Hz and 60 Hz
50 Hz 230 VΔ/400 VY,
1
–
60 Hz 460 VY
50 Hz 400 VΔ/690 VY,
6
–
60 Hz 460 VΔ
Voltage at 50 Hz and 50 Hz output
500 VY
3
–
500 VΔ
5
–
220 VΔ/380 VY
9
L1R
(440 VY at 60 Hz)
230 VΔ
9
L1E
380 VΔ/660 VY
9
L1L
(440 VΔ at 60 Hz)
415 VY
9
L1C
415 VΔ
9
L1D
400 VY
9
L1A
400 VΔ
9
L1B
400 VΔ
9
L1U
(460 VΔ at 60 Hz)
Voltage at 87 Hz and 87 Hz output
400 VΔ 1)
9
L3A
Voltage at 60 Hz and required output at 60 Hz
220 VΔ/380 VY; 50 Hz output
9
L2A
220 VΔ/380 VY; 60 Hz output
9
L2B
380 VΔ/660 VY; 50 Hz output
9
L2C
380 VΔ/660 VY; 60 Hz output
9
L2D
440 VY; 50 Hz output
9
L2Q
440 VY; 60 Hz output
9
L2W
440 VΔ; 50 Hz output
9
L2R
440 VΔ; 60 Hz output
9
L2X
460 VY; 50 Hz output
9
L2S
460 VY; 60 Hz output
9
L2E
460 VΔ; 50 Hz output
9
L2T
460 VΔ; 60 Hz output
9
L2F
575 VY; 50 Hz output
9
L2U
575 VY; 60 Hz output
9
L2L
575 VΔ; 50 Hz output
9
L2V
575 VΔ; 60 Hz output
9
L2M
Non-standard voltage and/or frequencies
Non-standard winding 2)
9
L1Y • and
identification code
Motor category
Motor
version
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100 112 132 160 180 200 225 250 280 315
315 L
S/M
Motor
type
(castiron)
1LA6/
1LG4
1LA6
1LG4
1LG6
1LG6
1LG6
1LG6
Motor
type
Frame size
100 112
132
160
180
200
225
250
280
315
S/M
315 L
all
all











all
all











all
all
all
all
all
all











–
–
–
–







53.50 64.60 82.90 102.– 137.– 157.– 213.– 243.– 314.– 408.– –
all
all
all
all










–
53.50 64.60 82.90 102.– 137.– 157.– 213.– 243.– 314.– 408.– 408.–
all
all
all
all
all
all
all
all
all
all
53.50
53.50



64.60
64.60



82.90
82.90



102.–
102.–



137.–
137.–



all
all




O. R. O. R. O. R. O. R. O. R. O. R.
–
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
all
53.50
53.50
53.50
53.50
53.50
53.50
53.50
53.50
53.50

53.50

53.50
53.50
53.50

64.60
64.60
64.60
64.60
64.60
64.60
64.60
64.60
64.60

64.60

64.60
64.60
64.60

82.90
82.90
82.90
82.90
82.90
82.90
82.90
82.90
82.90

82.90

82.90
82.90
82.90

102.–
102.–
102.–
102.–
102.–
102.–
102.–
102.–
102.–

102.–

102.–
102.–
102.–

137.–
137.–
137.–
137.–
137.–
137.–
137.–
137.–
137.–

137.–

137.–
137.–
137.–

–
–
408.–
408.–
–
–
408.–
408.–
–
–
408.–

–
–
408.–

all
all
107.– 130.– 165.– 206.– 265.– 323.– 478.– 603.– 772.– 1000.– 1000.–
157.–
157.–



157.–
157.–
157.–
157.–
157.–
157.–
157.–
157.–
157.–

157.–

157.–
157.–
157.–

213.–
213.–



213.–
213.–
213.–
213.–
213.–
213.–
213.–
213.–
213.–

213.–

213.–
213.–
213.–

243.–
243.–



243.–
243.–
243.–
243.–
243.–
243.–
243.–
243.–
243.–

243.–

243.–
243.–
243.–

314.–
314.–



314.–
314.–
314.–
314.–
314.–
314.–
314.–
314.–
314.–

314.–

314.–
314.–
314.–

408.–
408.–



408.–
408.–
408.–
408.–
408.–
408.–
408.–
408.–
408.–

408.–

408.–
408.–
408.–

–
408.–
–


Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
–
Not possible
O. R. Possible on request


1)
Only possible for 4-pole, 6-pole and 8-pole motors. The operating data
for converter-fed operation is also provided in a table on the rating plate.
Only possible in combination with order codes M38, M39, M73 and M75.
Recommended retail prices plus metal surcharges (MS)
2)
Plain text must be specified in the order: Voltage between 200 V and 690 V
(voltages outside this range are available on request), frequency, circuit,
for 60 Hz additionally required rated output in kW.
Siemens D 81.1 P · 03/2015
4/29
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Aluminum series 1MB10
10
20
30
On
request
■ Selection and ordering data
Types of construction
Type of
construction
code
14th
position
of the
Article
No.
1MB10 . . - . . . . . - . ■ . . (-Z)
Without flange
IM B3
A
4
For types of
construction
with order
code(s)
Article No.
with
additional
identification code
-Z
Motor category
Motor
version
Motor
type
(alum.)
1MB10.2
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
Order
code
Ex t (Zone 21/22)
Ex n (Zone 2)
IE1 Standard
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE2 High
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE3 Premium
Efficiency
Motor
version
–
all
all






1MB10.2
1MB10.1
1MB10.1
1MB10.3
1MB10.3
Motor
type
Frame size
80
90
100
112
132
160
IM B6 1)
T
–
all
all






IM B7 1)
U
–
all
all






IM B8 1)
V
–
all
all






IM V6 1)
D
–
all
all






IM V5
with protective
cover 1)
C
H00
all
all
54.–
54.–
78.40
78.40
137.–
137.–
With flange
acc. to DIN EN 50347
acc. to DIN 42948
F
–
all
all
FF165
A 200
52.10
FF165
A 200
62.50
FF215
A 250
77.40
FF215
A 250
96.10
FF265
A 300
125.–
FF300
A 350
162.–
IM V1
with protective
cover 1) 2)
G
H00
all
all
106.10
116.50
155.80
174.50
262.–
299.–
IM V3 1)
H
–
all
all
52.10
62.50
77.40
96.10
125.–
162.–
IM B35
J
–
all
all
69.90
79.90
96.10
126.–
158.–
228.–
IM B5
For legends and footnotes, see Page 4/31.
4/30
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Standard delivery times in working days:
10
20
30
Types of construction
Supplements to article numbers and special versions
On
request
Type of
construction
code
14th
position
of the
Article
No.
Types of construction
Aluminum series 1MB10
For types of
construction
with order
code(s)
Article No.
with
additional
identification code
-Z
Order
1MB10 . . - . . . . . - . ■ . . (-Z) code
With standard flange
acc. to DIN EN 50347
acc. to DIN 42948
1)
IM B14
K
–
Motor category
Motor
version
Ex t (Zone 21/22)
Ex n (Zone 2)
IE1 Standard
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE2 High
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE3 Premium
Efficiency
Motor
version
Motor
type
(alum.)
1MB10.2
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
1MB10.2
1MB10.1
1MB10.1
1MB10.3
1MB10.3
Motor
type
100
FT130
C 160
77.40
112
FT130
C 160
96.10
132
FT165
C 200
125.–
160
FT215
C 250
162.–
all
all
Frame size
80
90
FT100
FT115
C 120
C 140
52.10
62.50
IM V19 1)
L
–
all
all
52.10
62.50
77.40
96.10
125.–
162.–
IM V18
with protective
cover 1)
M
H00
all
all
106.10
116.50
155.80
174.50
262.–
299.–
IM B34
N
–
all
all
69.90
79.90
96.10
126.–
158.–
228.–
With special flange
IM B14 1)
acc. to DIN EN 50347
acc. to DIN 42948
K
P01
all
all
FT130
C 160
97.50
FT130
C 160
107.90
FT165
C 200
122.80
FT165
C 200
141.50
FT215
C 250
181.70
FT265
C 300
–
IM V19 1)
L
P01
all
all
–
–
122.80
141.50
181.70
–
IM V18
with protective
cover 1)
M
P01+H00
all
all
–
–
201.20
219.90
318.70
–
IM B34
N
P01
all
all
–
–
141.50
171.40
214.70
–

–
Standard version
Not possible
1)
The following applies for explosion-proof motors: In the case of the types
of construction with shaft extension down, the version "with protective
cover" is required. For types of construction with shaft extension pointing
upwards, a suitable cover must be implemented to prevent small parts
from falling into the fan cover (see the standard IEC/EN 60079-0).
The cover must not block the cooling air flow.
2)
The "Second shaft extension" option, order code L05 is not possible.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/31
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Cast-iron series 1MB15 Basic Line, 1MB16 Performance Line
10
20
On
request
30
■ Selection and ordering data
Types of construction
Type
of
construction
code
14th
position
of the
Article
No.
For
types
of construction with
order
code(s)
Article
No. with
additional
identification
code
-Z
Order
1MB15/6 . . - . . . . . - . ■ . . (-Z) code
Without flange
IM B3
A
–
4
Motor category
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132 160 180 200 225 250 280
315
315 L 315 L
S/M
2-pole 4-pole,
6-pole,
8-pole
Ex t (Zone 21/22) 1MB15.1 1MB15.1
Ex n (Zone 2)
1MB16.1 1MB16.1
IE2 High
Efficiency
Ex t (Zone 21/22) 1MB15.3 1MB15.3
Ex n (Zone 2)
1MB16.3 1MB16.3
IE3 Premium
Efficiency
Motor
Motor
Frame size
version
type
100
112
132 160 180 200 225 250 280
315
315 L 315 L
S/M
2-pole 4-pole,
6-pole,
8-pole
Motor
type
(alum.)
all
all












IM B6 1)
T
–
all
all












IM B7 1)
U
–
all
all












IM B8 1)
V
–
all
all












IM V6 1)
D
–
all
all












IM V5
with
protective
cover
C
H00
all
all
78.40 78.40 137.– 137.– 183.– 275.– 364.– 455.– 546.–
729.–
1170.– 729.–
all
FF215 FF215 FF265 FF300 FF300 FF350 FF400 FF500 FF500 FF600 FF600 FF600
A 250 A 250 A 300 A 350 A 350 A 400 A 450 A 550 A 550 A 660 A 660 A 660
77.40 96.10 125.– 162.– 256.– 311.– 402.– 483.– 703.– 1000.– –
–
1)
With flange
IM B5
acc. to DIN EN 50347
acc. to DIN 42948
F
–
all
G
H00
all
all
155.80 174.50 262.– 299.– 437.– 584.– 768.– 947.– 1250.– 1740.– 2160.– 1740.–
IM V3 1)
H
–
all
all
77.40 96.10 125.– 162.– 256.– 311.– 402.– 483.– 703.–
IM B35
J
–
all
all
96.10 126.– 158.– 228.– 346.– 455.– 672.– 915.– 1190.– 1570.– 1570.– 1570.–
IM V1
with
protective
cover
1) 2)
1000.– –
–
For legends and footnotes, see Page 4/33.
4/32
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Standard delivery times in working days:
10
20
Types of construction
30
Supplements to article numbers and special versions
On
request
Types of construction
Cast-iron series 1MB15 Basic Line, 1MB16 Performance Line
Type
of
construction
code
14th
position
of the
Article
No.
For
types
of construction with
order
code(s)
Article
No. with
additional
identification
code
-Z
Motor category
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132 160 180 200 225 250 280
315
315 L 315 L
S/M
2-pole 4-pole,
6-pole,
8-pole
Ex t (Zone 21/22) 1MB15.1 1MB15.1
Ex n (Zone 2)
1MB16.1 1MB16.1
IE2 High
Efficiency
Ex t (Zone 21/22) 1MB15.3 1MB15.3
Ex n (Zone 2)
1MB16.3 1MB16.3
IE3 Premium
Efficiency
Motor
Motor
Frame size
version
type
100
112
132 160 180 200 225 250 280
315
315 L 315 L
S/M
2-pole 4-pole,
Order
6-pole,
1MB15/6 . . - . . . . . - . ■ . . (-Z) code
8-pole
With standard flange
acc. to DIN EN 50347
FT130 FT130 FT165 FT215
acc. to DIN 42948
C 160 C 160 C 200 C 250
IM B14 1)
K
–
all
all
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
IM V19 1)
L
–
all
all
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
IM V18
with
protective
cover
M
H00
all
all
156.– 175.– 262.– 299.– –
–
–
–
–
–
–
–
IM B34 1)
N
–
all
all
96.10 126.– 158.– 228.– –
–
–
–
–
–
–
–
With special flange
IM B14 1)
acc. to DIN EN 50347
acc. to DIN 42948
K
P01
all
all
FT165 FT165 FT165 FT215
C 200 C 200 C 250 C 300
123.– 142.– 182.– –
–
–
–
–
–
–
–
–
IM V19 1)
L
P01
all
all
123.– 142.– 182.– –
–
–
–
–
–
–
–
–
IM V18
with
protective
cover
M
P01+
H00
all
all
201.– 220.– 319.– –
–
–
–
–
–
–
–
–
N
P01
all
all
142.– 171.– 215.– –
–
–
–
–
–
–
–
–
Motor
type
(alum.)
1) 2)
1)
IM B34

–
Standard version
Not possible
1)
The following applies for explosion-proof motors: In the case of the types
of construction with shaft extension down, the version "with protective
cover" is required. For types of construction with shaft extension pointing
upwards, a suitable cover must be implemented to prevent small parts
from falling into the fan cover (see the standard IEC/EN 60079-0).
The cover must not block the cooling air flow.
2)
The "Second shaft extension" option, order code L05 is not possible.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/33
4
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Aluminum series 1MA7
10
20
30
On
request
■ Selection and ordering data
Types of construction
Type of
construction code
12th
position
of the
Article
No.
Additional
identification code
with order
code and
plain text
if required
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
Motor type Motor type – Frame size
version
(alum.)
63
71
80
90
100
112
132
160
Zone 1 Ex e II. 1MA7
1MA7
Motor
Motor
Frame size
version
type
1MA7 . . . - . . . . ■
Without flange
IM B3
0
Order code
–
all
IM B6, IM B7,
IM B8 1)
0
–
IM V6 1)
0
IM V5
with
protective
cover
9
63
71
80
90
100
112
132
160
all








all
all








–
all
all








M1F
all
all
44.30
49.10
59.–
68.50
72.70
84.10
108.–
149.–
IM B5
acc. to DIN EN 50347
acc. to DIN 42948
1
–
all
all
FF115
A 140
42.90
FF130
A 160
47.50
FF165
A 200
53.80
FF165
A 200
64.80
FF215
A 250
79.80
FF215
A 250
99.50
FF265
A 300
130.–
FF300
A 350
166.–
IM V3 1)
1
–
all
all
42.90
47.50
53.80
64.80
79.80
99.50
130.–
166.–
IM V1
with
protective
cover
4
–
all
all
85.80
93.60
110.–
130.–
151.–
181.–
234.–
313.–
IM B35
6
–
all
all
60.40
64.80
72.30
83.30
99.50
130.–
163.–
235.–
With standard flange
IM B14 1)
acc. to DIN EN 50347
acc. to DIN 42948
2
–
all
all
FT75
C 90
42.90
FT85
C 105
47.50
FT100
C 120
53.80
FT115
C 140
64.80
FT130
C 160
79.80
FT130
C 160
99.50
FT165
C 200
130.–
FT215
C 250
166.–
IM V19 1)
2
–
all
all
42.90
47.50
53.80
64.80
79.80
99.50
130.–
166.–
IM V18
with
protective
cover
9
M2A
all
all
89.20
97.30
114.–
135.–
157.–
188.–
243.–
326.–
7
–
all
all
60.40
64.80
72.30
83.30
99.50
130.–
163.–
235.–
1) 2)
With flange
4
1) 2)
1) 2)
IM B34
For legends and footnotes, see Page 4/35.
4/34
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
30
Types of construction
Type of
construction code
12th
position
of the
Article
No.
Additional
identification code
with order
code and
plain text
if required
Types of construction
Aluminum series 1MA7
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
Motor type Motor type – Frame size
version
(alum.)
63
71
80
90
100
112
132
160
Zone 1 Ex e II. 1MA7
1MA7
Motor
Motor
Frame size
version
type
1MA7 . . . - . . . . ■
Order code
With special flange
acc. to DIN EN 50347
acc. to DIN 42948
IM B14 1)
3
–
all
IM V19 1)
3
–
IM V18
with
protective
cover
9
9
all
63
FT100
C 120
42.90
71
FT115
C 140
47.50
80
FT130
C 160
53.80
90
FT130
C 160
64.80
100
FT165
C 200
79.80
112
FT165
C 200
99.50
132
FT215
C 250
130.–
160
FT265
C 300
166.–
all
all
42.90
47.50
53.80
64.80
79.80
99.50
130.–
166.–
M2B
all
all
89.20
97.30
114.–
135.–
157.–
188.–
243.–
326.–
M2C
all
all
62.80
67.40
75.20
86.60
103
135.–
170.–
244.–
1) 2)
IM B34

Standard version
4
1)
The following applies for explosion-proof motors: In the case of the types
of construction with shaft extension down, the version "with protective
cover" is required. For types of construction with shaft extension pointing
upwards, a suitable cover must be implemented to prevent small parts
from falling into the fan cover (see the standard IEC/EN 60079-0).
The cover must not block the cooling air flow.
2)
The "Second shaft extension" option, order code K16 is not possible.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/35
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Cast-iron series 1MA6
10
20
On
request
30
■ Selection and ordering data
Types of construction
Type
of construction
code
12th
position
of the
Article
No.
Additional
identification
code
with
order
code
and plain
text if
required
Motor category Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor Motor type – Frame size
version type 100
112
132
160
180
200
225
250
280
315
(castS/M
iron)
Zone 1 1MA6 1MA6
Ex e II.
Motor
Motor Frame size
version type
100
112
1MA6 . . . - . . . . ■
Without flange
IM B3
0
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
132
160
180
200
225
250
280
315
S/M
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
Order
code
–
all
all












IM B6, IM B7,
IM B8 1) 2)
0
–
all
all












IM V6 1) 2) 4)
0
9
–
M1E
all
all
all
all










–
–
–
–
–
–
–
–
–
–
–
455.–
–

9
M1F
all
all
72.70
84.10
108.–
149.–
194.–
293.–
394.–
491.–
588.–
783.–
1260.– 783.–
all
FF215 FF215 FF300 FF300 FF300 FF350 FF400 FF500 FF500 FF600 FF600 FF600
A 250 A 250 A 300 A 350 A 350 A 400 A 450 A 550 A 550 A 660 A 660 A 660
79.80 99.50 130.– 166.– 265.– 322.– 417.– 499.– 729.– 1040.– –
–
IM V5
with
protective
cover
1) 2) 3) 4)
With flange
acc. to DIN EN 50347
acc. to DIN 42948
1
–
all
IM B5
4
IM V3 1) 5)
1
9
–
M1G
all
all
all
all
79.80
–
99.50
–
130.–
–
166.–
–
–
276.–
–
335.–
–
434.–
–
519.–
–
758.–
IM V1
with
protective
cover
4
–
all
all
151.–
181.–
234.–
313.–
454.–
604.–
794.–
978.–
1300.– 1800.– 2250.– 1800.–
IM B35
6
–
all
all
99.50
130.–
163.–
235.–
359.–
472.–
699.–
936.–
1230.– 1600.– 1600.– 1600.–
With standard flange
IM B14 1)
acc. to DIN EN 50347
acc. to DIN 42948
2
–
all
all
FT130 FT130 FT165 FT215
C 160 C 160 C 200 C 250
79.80 99.50 130.– 166.– –
–
–
–
–
–
–
–
IM V19 1)
2
–
all
all
79.80
99.50
130.–
166.–
–
–
–
–
–
–
–
–
IM V18
with
protective
cover
9
M2A
all
all
157.–
188.–
243.–
326.–
–
–
–
–
–
–
–
–
7
–
all
all
99.50
130.–
163.–
235.–
–
–
–
–
–
–
–
–
–
–
1080.– –
–
–
1) 3) 4) 5)
1) 3)
IM B34
For legends and footnotes, see Page 4/37.
4/36
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
Types of construction
30
On
request
Type
of construction
code
12th
position
of the
Article
No.
Additional
identification
code
with
order
code
and plain
text if
required
Types of construction
Cast-iron series 1MA6
Motor category Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor Motor type – Frame size
version type 100
112
132
160
180
200
225
250
280
315
(castS/M
iron)
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
Zone 1 1MA6 1MA6
Ex e II.
Motor
Motor Frame size
version type
100
112
200
225
250
280
315
S/M
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
all
FT165 FT165 FT215 FT265
C 200 C 200 C 250 C 300
79.80 99.50 130.– 166.– –
–
–
–
–
–
–
–
all
all
79.80
99.50
130.–
166.–
–
–
–
–
–
–
–
–
M2B
all
all
157.–
188.–
243.–
326.–
–
–
–
–
–
–
–
–
M2C
all
all
103.–
135.–
170.–
244.–
–
–
–
–
–
–
–
–
Order
1MA6 . . . - . . . . ■
code
With special flange
acc. to DIN EN 50347
acc. to DIN 42948
IM B14 1)
3
–
all
IM V19 1)
3
–
IM V18
with
protective
cover
9
9
132
160
180
1) 3)
IM B34


–
Standard version
Without additional charge
Not possible
4
1)
The following applies for explosion-proof motors: In the case of the types
of construction with shaft extension down, the version "with protective
cover" is required. For types of construction with shaft extension pointing
upwards, a suitable cover must be implemented to prevent small parts
from falling into the fan cover (see the standard IEC/EN 60079-0).
The cover must not block the cooling air flow.
2)
If motors of frame sizes 180 M to 315 L are fixed to the wall, it is
recommended that the motor feet are supported.
3)
The "Second shaft extension" option, order code K16 is not possible.
Recommended retail prices plus metal surcharges (MS)
4)
60 Hz version is available on request for 2-pole 1MA6 motors of frame size
315 L.
5)
1MA6 motors of frame sizes 225 S to 315 M are supplied with two screw-in
eyebolts conforming to IM B5, whereby one can be repositioned to
conform to IM V1 or IM V3. It is important to note that stress must not
be applied perpendicular to the ring plane.
Siemens D 81.1 P · 03/2015
4/37
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Aluminum series 1LA7, 1LA5, 1LA9
10
20
On
request
30
■ Selection and ordering data
Types of construction
Types
of construction
code
12th
position
of the
Article
No.
1LA . . . . - . . . . ■
Without flange
IM B3 5)
0
Additional
identification code
with order
code and
plain text
if required
Motor category
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type
63
71
80
90
100
112
132
160
180
200
(alum.)
1LA7
1LA7 $
1LA5 % 1)
225
Order
code
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
version
–
not possible for (











1LA9
1LA9 &
1LA9
1LA9 (
Motor
type
Frame size
63
71
80
90
100
112
132
160
180
200
225
IM B6,
IM B7,
IM B8 2) 5)
0
–
not possible for (











IM V6 2) 5)
0
–
not possible for (











IM V5
with
protective
cover
9
M1F
not possible for (
42.60 47.50 56.80 56.80 81.50 81.50 142.–
142.–
190.–
286.–
379.–
2) 3) 5)
With flange
4
IM B5
acc. to DIN EN 50347
acc. to DIN 42948
1
–
all
all
FF115 FF130 FF165 FF165 FF215 FF215 FF265 FF300 FF300 FF350 FF400
A 140 A 160 A 200 A 200 A 250 A 250 A 300 A 350 A 350 A 400 A 450
41.40 45.90 52.10 62.50 77.40 96.10 125.– 162.– 256.– 311.– 402.–
IM V3 2) 4)
1
9
–
M1G
all
all
all
all
41.40 45.90 52.10 62.50 77.40 96.10 125.–
–
–
–
–
–
–
–
162.–
–
–
266.–
–
323.–
–
418.–
IM V1
with
protective
cover
4
–
all
all
82.40 91.50 106.–
IM B35 5)
6
–
not possible for (
With standard flange
IM B14 2)
acc. to DIN EN 50347
acc. to DIN 42948
2
–
all
IM V19 2)
2
–
IM V18
with
protective
cover
9
7
117.–
156.–
175.–
262.–
303.–
437.–
584.–
768.–
58.60 62.50 69.90 79.90 96.10 126.–
158.–
228.–
346.–
455.–
672.–
all
FT75 FT85 FT100 FT115 FT130 FT130 FT165 FT215
C 90 C 105 C 120 C 140 C 160 C 160 C 200 C 250
41.40 45.90 52.10 62.50 77.40 96.10 125.– 162.– –
–
–
all
all
41.40 45.90 52.10 62.50 77.40 96.10 125.–
162.–
–
–
–
M2A
all
all
85.70 95.20 110.–
–
not possible for (
2) 3) 4)
122.–
162.–
182.–
272.–
315.–
–
–
–
58.60 62.50 69.90 79.90 96.10 126.–
158.–
228.–
–
–
–
2) 3)
IM B34 5)
For legends and footnotes, see Page 4/39.
4/38
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Standard delivery times in working days:
10
20
Types of construction
30
Types
of construction
code
12th
position
of the
Article
No.
Supplements to article numbers and special versions
On
request
Additional
identification code
with order
code and
plain text
if required
Types of construction
Aluminum series 1LA7, 1LA5, 1LA9
Motor category
Motor
version
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type
63
71
80
90
100
112
132
160
180
200
(alum.)
1LA7
1LA7 $
1LA5 % 1)
1LA9
1LA9 &
1LA9
1LA9 (
Order
1LA . . . . - . . . . ■
code
With special flange
acc. to DIN EN 50347
acc. to DIN 42948
IM B14 2)
3
–
all
Motor
type
all
Frame size
63
71
FT100 FT115
C 120 C 140
41.40 45.90
IM V19 2)
3
–
all
all
IM V18
with
protective
cover
9
M2B
all
all
9
M2C
not possible for (
80
FT130
C 160
52.10
90
FT130
C 160
62.50
160
180
FT265
C 300
162.– –
200
225
–
–
41.40 45.90 52.10 62.50 77.40 96.10 125.–
162.–
–
–
–
85.70 95.20 110.–
122.–
100
FT165
C 200
77.40
162.–
112
FT165
C 200
96.10
132
FT215
C 250
125.–
225
182.–
272.–
315.–
–
–
–
72.70 83.10 99.90 131.–
164.–
237.–
–
–
–
2) 3)
IM B34 5)

–
60.90 65.–
Standard version
Not possible
4
1)
Zone 2 is not possible for motor series 1LA5.
2)
The following applies for explosion-proof motors: In the case of the types
of construction with shaft extension down, the version "with protective
cover" is required. For types of construction with shaft extension pointing
upwards, a suitable cover must be implemented to prevent small parts
from falling into the fan cover (see the standard IEC/EN 60079-0).
The cover must not block the cooling air flow.
3)
4)
For frame sizes 180 M to 225 M, the 1LA5 motors can be supplied with two
additional eyebolts; state identification code "-Z" and order code K32.
5)
For the North America export version of 1LA9 with order code D42, types
of construction with feet are not possible for 2-pole, 4-pole and 6-pole
motors ≤ 200 hp NEMA Energy Efficient in accordance with NEMA MG1
Table 12-11.
The "Second shaft extension" option, order code K16 is not possible.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/39
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Types of construction
Cast-iron series 1LA6, 1LG4, 1LG6
10
20
On
request
30
■ Selection and ordering data
Types of construction
Types
of construction
code
12th
position
of the
Article
No.
Additional Motor category
identifica- Motor
tion code version
with order
code and
plain text
if required
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type 100 112 132 160 180 200 225 250 280
315
315 L 315 L
(castS/M
2-pole 4-pole,
iron)
6-pole,
8-pole
1LA6/ 1LA6 $
1LG4 %
1LG4
1LG6
1LG6 &
1LG6
1LG6 (
Motor Frame size
type
100 112
132
160
180
200
225
250
280
315
S/M
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
1LA . . . . - . . . . ■
1LG . . . . - . . . . ■
Without flange
IM B3 6)
0
Order
code
–
not possible for (












IM B6,
IM B7,
IM B8
0
–
not possible for (












0
9
–
M1E
not possible for (
not possible for (










–
–
–
–
–
–
–
–
–
–
–
–
438.– 
9
M1F
not possible for (
81.50 81.50 142.– 142.– 190.– 286.– 379.– 473.– 568.– 758.– 1220.– 758.–
1) 2) 6)
IM V6
1) 2) 4) 6)
4
IM V5
with
protective
cover
1) 2) 3) 4) 6)
With flange
IM B5
acc. to DIN EN 50347
acc. to DIN 42948
1
–
all
all
FF215 FF215 FF265 FF300 FF300 FF350 FF400 FF500 FF500 FF600 FF600 FF600
A 250 A 250 A 300 A 350 A 350 A 400 A 450 A 550 A 550 A 660 A 660 A 660
77.40 96.10 125.– 162.– 256.– 311.– 402.– 483.– 703.– 1000.– –
–
IM V3 1) 5)
1
9
–
M1G
all
all
all
all
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
–
–
–
266.– 323.– 418.– 502.– 731.– 1040.– –
IM V1
with
protective
cover
4
–
all
all
156.– 175.– 262.– 303.– 437.– 584.– 768.– 947.– 1250.– 1740.– 2160.– 1740.–
6
–
not possible for (
–
–
1) 3) 4) 5)
IM B35 6)
96.10 126.– 158.– 228.– 346.– 455.– 672.– 915.– 1190.– 1570.– 1570.– 1570.–
For legends and footnotes, see Page 4/41.
4/40
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Standard delivery times in working days:
10
20
Types of construction
30
Types
of construction
code
12th
position
of the
Article
No.
Supplements to article numbers and special versions
On
request
Types of construction
Cast-iron series 1LA6, 1LG4, 1LG6
Additional Motor category
identifica- Motor
tion code version
with order
code and
plain text
if required
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II,
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type 100 112 132 160 180 200 225 250 280
315
315 L 315 L
(castS/M
2-pole 4-pole,
iron)
6-pole,
8-pole
1LA6/ 1LA6 $
1LG4 %
1LG4
1LG6
1LG6 &
1LG6
1LG6 (
Motor Frame size
type
100 112
200
225
250
280
315
S/M
315 L 315 L
2-pole 4-pole,
6-pole,
8-pole
all
FT130 FT130 FT165 FT215
C 160 C 160 C 200 C 250
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
all
all
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
M2A
all
all
162.– 182.– 272.– 315.– –
–
–
–
–
–
–
–
–
all
all
96.10 126.– 158.– 228.– –
–
–
–
–
–
–
–
acc. to DIN EN 50347
acc. to DIN 42948
3
–
all
all
FT165 FT165 FT215 FT265
C 200 C 200 C 250 C 300
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
1LA . . . . - . . . . ■
Order
1LG . . . . - . . . . ■
code
With standard flange
acc. to DIN EN 50347
acc. to DIN 42948
IM B14 1)
2
–
all
IM V19 1)
2
–
IM V18
with
protective
cover
9
IM B34 6)
7
With special flange
132
160
180
1) 3)
IM B14
1)
4
IM V19 1)
3
–
all
all
77.40 96.10 125.– 162.– –
–
–
–
–
–
–
–
IM V18
with
protective
cover
9
M2B
all
all
162.– 182.– 272.– 315.– –
–
–
–
–
–
–
–
9
M2C
all
all
99.90 131.– 164.– 237.– –
–
–
–
–
–
–
–
1) 3)
IM B34 6)


–
1)
Standard version
Without additional charge
Not possible
The following applies for explosion-proof motors: In the case of the types
of construction with shaft extension down, the version "with protective
cover" is required. For types of construction with shaft extension pointing
upwards, a suitable cover must be implemented to prevent small parts
from falling into the fan cover (see the standard IEC/EN 60079-0).
The cover must not block the cooling air flow.
4)
60 Hz version is available on request for 2-pole 1LG4/1LG6 motors of
frame size 315 L.
5)
2)
1LG4/1LG6 motors of frame sizes 225 S to 315 M are supplied with two
screw-in eyebolts conforming to IM B5, whereby one can be repositioned
to conform to IM V1 or IM V3. It is important to note that stress must not be
applied perpendicular to the ring plane.
If motors of frame sizes 180 M to 315 L are fixed to the wall, it is
recommended that the motor feet are supported.
6)
3)
The "Second shaft extension" option, order code K16 is not possible.
For the North America export version of 1LG6 with order code D42, types
of construction with feet are not possible for 2-pole, 4-pole and 6-pole
motors ≤ 200 hp NEMA Energy Efficient in accordance with NEMA MG1
Table 12-11.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/41
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Motor protection
Aluminum series 1MB10
10
20
30
On
request
■ Selection and ordering data
Motor protection
Motor
protection
struction
code
15th
position
of the
Article
No.
1MB10 . . - . . . . . - . . ■ .
Motor protection (winding protection)
Without motor protection
A
Motor protection with PTC thermistors B
with 3 embedded temperature sensors
for tripping 1)
Motor protection with PTC thermistors C
with 6 embedded temperature sensors
for alarm and tripping 1)
Motor temperature detection with
F
embedded temperature sensor
1)
KTY 84-130
G
Motor temperature detection with
embedded temperature sensor
1)
2 × KTY 84-130
Installation of 3 external Pt100
H
resistance thermometers 1) 2)

–
Additional
identification code
with order
code and
plain text
if required
Motor category
Motor
version
Ex t (Zone 21/22)
Ex n (Zone 2)
IE1 Standard
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE2 High
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE3 Premium
Efficiency
Motor
Order code version
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
1MB10.2
1MB10.2
1MB10.1
1MB10.1
1MB10.3
1MB10.3
Motor type Frame size
80
90
100
112
132
160
–
–
all
all
all
all






35.30
41.40
114.–
114.–
171.–
171.–
–
all
all
168.–
168.–
195.–
195.–
261.–
261.–
–
all
all
100.–
100.–
114.–
114.–
171.–
171.–
–
all
all
201.–
201.–
229.–
229.–
342.–
342.–
–
all
all
–
–
1440.–
1440.–
1440.–
1440.–
Standard version
Not possible
4
1)
Evaluation with appropriate tripping unit (see Catalog IC 10) is
recommended.
4/42
Siemens D 81.1 P · 03/2015
2)
And in combination with the 15th position of MLFB "H", for frame sizes 100
to 160 order codes Q02 and Q03 are not possible. It can only be supplied
with a star or delta winding for direct switch-on (3 terminals).
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
30
On
request
Motor protection
Cast-iron series 1MB15 Basic Line, 1MB16 Performance Line
■ Selection and ordering data
Motor protection
Motor
protection
struction
code
15th
position
of the
Article
No.
Additional
identification
code
with
order
code
and
plain
text if
required
Order
1MB15/6 . . - . . . . . - . . ■ .
code
Motor protection (winding protection)
Without motor protection
A
–
Motor protection with PTC
B
–
thermistors with 3 embedded
temperature sensors for
tripping 1) 2)
C
–
Motor protection with PTC
thermistors with 6 embedded
temperature sensors for alarm
and tripping 2)
–
Motor temperature detection F
with embedded temperature
2)
sensor KTY 84-130
–
Motor temperature detection G
with embedded temperature
2)
sensors 2 × KTY 84-130
Installation of 3 external Pt100 H
–
resistance thermometers 2) 3)
Installation of 6 external Pt100 J
–
resistance thermometers
2)
in stator winding

–
Motor category
Motor
version
Motor
type
(alum.)
Ex t (Zone 21/22) 1MB15.1
Ex n (Zone 2)
1MB16.1
IE2 High
Efficiency
Ex t (Zone 21/22) 1MB15.3
Ex n (Zone 2)
1MB16.3
IE3 Premium
Efficiency
Motor
Motor
version
type
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
315
1MB15.1
1MB16.1
1MB15.3
1MB16.3
Frame size
100
112
132
160
180
200
225
250
280
315
all, except Performance Line 
all
all
114.–









114.–
171.–
171.–
227.–
227.–
310.–
310.–
386.–
386.–
all
all
195.–
195.–
261.–
261.–
401.–
401.–
521.–
521.–
647.–
647.–
all
all
114.–
114.–
171.–
171.–
322.–
322.–
441.–
572.–
572.–
843.–
all
all
229.–
229.–
342.–
342.–
523.–
523.–
719.–
974.–
974.–
1430.–
all
all
1440.– 1440.– 1440.– 1440.– 1440.– 1440.– 1440.– 1590.– 1590.– 1590.–
all
all
–
–
–
–
2350.– 2350.– 2350.– 2350.– 2350.– 2350.–
Standard version
Not possible
4
1)
For the Performance Line, motor protection by means of PTC thermistors
with 3 embedded temperature sensors for tripping (motor protection code
B) is already included in the base price. For the Performance Line, the
option "without motor protection" (motor protection code A) is not possible.
Recommended retail prices plus metal surcharges (MS)
2)
Evaluation with appropriate tripping unit (see Catalog IC 10) is
recommended.
3)
In combination with the 15th position of MLFB "H", order codes Q02 and
Q03 are not possible for frame sizes 100 to 160. It can only be supplied
with a star or delta winding for direct switch-on (3 terminals).
Siemens D 81.1 P · 03/2015
4/43
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Connection box position
Aluminum series 1MB10
10
20
30
On
request
■ Selection and ordering data
Connection box
4
6
5
Connection
box position
code
16th position
of the
Article No.

–
Motor category
Motor
version
■
Ex t (Zone 21/22)
Ex n (Zone 2)
IE1 Standard
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE2 High
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE3 Premium
Efficiency
Motor
Order code version
4
5
6
7
–
–
–
–
7
1MB10 . . - . . . . . - . . .
Connection box
Connection box top 1)
Connection box on RHS 2)
Connection box on LHS 2)
Connection box bottom 2) 3)
Additional
identification code
with order
code and
plain text
if required
all
all
all
all
1MB10 . 2
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
1MB10.2
1MB10 . 1
1MB10.1
1MB10 . 3
1MB10.3
Motor
type
Frame size
80
90
100
112
132
160
all
all
all
all






34.20
34.20
–
38.60
38.60
–
99.50
99.50
99.50
108.–
108.–
108.–
117.–
117.–
117.–
125.–
125.–
125.–
Motor type
(alum.)
Standard version
Not possible
4
1)
For types of construction with feet, cast feet are standard.
2)
For types of construction with feet, screwed-on feet are standard.
3)
Not generally possible for motors with feet.
4/44
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
On
request
30
Connection box position
Cast-iron series 1MB15 Basic Line, 1MB16 Performance Line
■ Selection and ordering data
Connection box
4
6
5
Connection
box position
code
16th position
of the
Article No.
■
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor
Motor type Motor type – Frame size
version
(alum.)
100
112 132 160 180 200 225 250 280
Ex t (Zone 21/22) 1MB15 .1 1MB15 .1
Ex n (Zone 2)
1MB16 .1 1MB16 .1
IE2 High
Efficiency
Ex t (Zone 21/22) 1MB15 .3 1MB15 .3
Ex n (Zone 2)
1MB16 .3 1MB16 .3
IE3 Premium
Efficiency
Motor
Motor type Frame size
Order code version
100
112 132 160 180 200 225 250 280
4
5
–
–
all
all
all
all

6
–
all
all
99.50 108.– 117.– 125.– 353.– 416.– 492.– 731.– 821.– 946.–
7
–
all
all
99.50 108.– 117.– 125.– –
7
1MB15/6 . . - . . . . . - . . .
Connection box
Connection box top 1)
Connection box
on RHS 2)
Connection box
on LHS 2)
Connection box bottom 2) 3)

–
Additional
identification code
with order
code and
plain text
if required
Motor category








315
315

99.50 108.– 117.– 125.– 353.– 416.– 492.– 731.– 821.– 946.–
–
–
–
–
–
Standard version
Not possible
4
1)
For types of construction with feet, cast feet are standard.
2)
For types of construction with feet, screwed-on feet are standard.
3)
Not generally possible for motors with feet.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/45
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Aluminum series 1MB10
10
20
30
On
request
■ Selection and ordering data
Special versions
1MB10 . . - . . . . . - . . . . -Z
Design for Zones according to ATEX
Design (IP55) for Zone 2 and 22,
for non-conductive dust 1)
Version for Zone 2 in
Ex nA IIB T3 Gc
VIK version
4
Additional
identification
code -Z
with order
code and
plain text
if required
Motor
version
Motor type
(alum.)
1MB10.2
1MB10.1
1MB10.1
1MB10.3
1MB10.3
Order code
Ex t (Zone 21/22)
Ex n (Zone 2)
IE1 Standard
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE2 High Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE3 Premium
Efficiency
Motor
version
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
1MB10.2
Motor
type
Frame size
80
90
100
112
132
160
B30
Zone 2 Ex n
1MB103
76.50
91.60
104.–
122.–
183.–
266.–
B31
Zone 2 Ex n
1MB103






C02
Zone 2 Ex n
IE2 High Efficiency 1MB1031
IE3 Premium
Efficiency
1MB1033
80.–
82.–
84.–
86.–
102.–
102.–
all
all
all
all












all
all






all
all






all
all
119.–
119.–
224.–
224.–
224.–
276.–
all
all


–
–
–
–
all
all
39.50
39.50
46.–
46.–
61.20
61.20
all
all
39.50
39.50
46.–
46.–
61.20
61.20
all
all
70.80
83.30
103.–
125.–
159.–
198.–
all
all
70.80
83.30
103.–
125.–
159.–
198.–
all
all
141.–
141.–
141.–
141.–
141.–
214.–
all
all
267.–
267.–
275.–
309.–
334.–
444.–
all
all
106.–
125.–
154.–
186.–
240.–
295.–
all
all
all
all
all
all
all
all
all
all







19.90
624.659.-

26.50
624.659.-

26.50
658.–
745.–

26.50
658.–
745.–

42.20
703.–
745.–

42.20
703.–
787.–
all
all
58.30
58.30
98.30
98.30
129.–
129.–
Motor connection and connection box
External grounding
Rotation of the connection box
R10
through 90°, entry from DE
Rotation of the connection box
R11
through 90°, entry from NDE
Rotation of the connection box
R12
through 180°
Cable gland, max. configuration,
R18
certified according to ATEX
Larger connection box
R50
Windings and insulation
Temperature class 155 (F), used acc.
N05
to 130 (B), coolant temperature 45 °C,
2)
derating approx. 4 %
Temperature class 155 (F), used acc.
N06
to 130 (B), coolant temperature 50 °C,
2)
derating approx. 8 %
N07
Temperature class 155 (F), used acc.
to 130 (B), coolant temperature 55 °C,
derating approx. 13 % 2)
Temperature class 155 (F), used acc.
N08
to 130 (B), coolant temperature 60 °C,
derating approx. 18 %
Increased air humidity/temperature
N20
with 30 to 60 g water per m³ of air
Increased air humidity/temperature
N21
with 60 to 100 g water per m³ of air
Temperature class 155 (F), used acc.
Y50 • and
to 130 (B), with higher coolant
specified
temperature and/or site altitude
output,
CT .. °C or
SA …. m
above
sea level
Colors and paint finish
Special finish in RAL 7030 stone gray
Unpainted (only cast-iron parts primed) S00
Unpainted, only primed
S01
Special finish sea air resistant
S03
Special finish in special RAL colors:
Y51 • and
For RAL colors, see "Special finish in
special finish
special RAL colors"
RAL ….
(see Catalog D 81.1 Part 1)
Y54 • and
Special finish in other standard RAL
special finish
colors: RAL 1002, 1013, 1015, 1019,
RAL ….
2003, 2004, 3000, 3007, 5007, 5009,
5010, 5012, 5015, 5017, 5018, 5019,
6011, 6019, 6021, 7000, 7001, 7004,
7011, 7016, 7022, 7031, 7032, 7033,
7035, 9001, 9002, 9005
(see Catalog D 81.1 Part 1)
Motor category
For legends and footnotes, see Page 4/48.
4/46
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Standard delivery times in working days:
10
20
Special versions
30
Supplements to article numbers and special versions
On
request
Additional
identification
code -Z
with order
code and
plain text
if required
Options
Aluminum series 1MB10
Motor category
Motor
version
Motor type
(alum.)
Ex t (Zone 21/22)
Ex n (Zone 2)
IE1 Standard
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE2 High Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE3 Premium
Efficiency
Motor
version
1MB10.2
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
1MB10.2
1MB10.1
1MB10.1
1MB10.3
1MB10.3
Motor
type
1MB10 . . - . . . . . - . . . . -Z Order code
Mechanical design and degrees of protection
Low-noise version for 2-pole motors
F77
all
all
with clockwise direction of rotation
Low-noise version for 2-pole motors with F78
all
all
counter-clockwise direction of rotation
Protective cover
H00
New! all
all
Vibration-proof version
H02
all
all
Condensation drainage holes 6)
H03
all
all
Rust-resistant screws (externally)
H07
all
all
IP65 degree of protection 4)
H20
Ex n (Zone 2)
1MB103
IP56 degree of protection 5)
H22
Ex n (Zone 2)
1MB103
Drive-end seal for flange-mounting
H23
all
all
motors, oil-tight to 0.1 bar 3)
Next larger standard flange
P01
New! all
all
Coolant temperature and site altitude
Coolant temperature
D03
all
all
–40 °C to +40 °C
Designs in accordance with standards and specifications
IEC Ex certification
D37
New! all
all
Bearings and lubrication
Located bearing DE
L20
all
all
Located bearing NDE
L21
all
all
Bearing design for increased cantilever L22
all
all
forces
Regreasing device
L23
all
all
Special bearing for DE and NDE,
L25
New! all
all
bearing size 63
Measuring nipple for SPM shock pulse Q01
all
all
measurement for bearing inspection
Balance and vibration quantity
Vibration quantity level A
all
all
Vibration quantity level B
L00
all
all
Half-key balancing
all
all
Balancing without key
L01
all
all
Full-key balancing
L02
all
all
Shaft and rotor
Shaft extension with standard
L04
all
all
dimensions without feather keyway
Second standard shaft extension
L05
all
all
Standard shaft made of stainless steel L06
all
all
Concentricity of shaft extension in
L07
all
all
accordance with DIN 42955 Tolerance R
Concentricity of shaft extension,
L08
all
all
coaxiality and linear movement in
accordance with DIN 42955 Tolerance R
for flange-mounting motors
all
all
Non-standard cylindrical shaft extension Y58 • and
identification
DE 7)
code
Non-standard cylindrical shaft extension Y59 • and
all
all
7)
NDE
identification
code
Heating and ventilation
Metal external fan 8)
F76
all, standard version for 1MB101
and 1MB102
9)
Anti-condensation heating for 230 V
Q02
all
all
Anti-condensation heating for 115 V 9) Q03
all
all
Frame size
80
90
100
112
132
160
–
–
–
–
595.–
595.–
–
–
–
–
595.–
595.–
54.–
141.64.40
64.40
143.158.46.–
54.–
160.71.80
64.40
143.158.49.20
78.40
180.–
78.70
78.70
143.–
158.–
54.80
78.40
199.–
85.90
78.70
143.–
158.–
59.90
137.–
216.–
93.10
93.10
143.–
158.–
73.10
137.–
234.–
100.–
93.10
214.–
235.–
107.–
45.40
45.40
45.40
56.70
56.70
–
379.–
443.–
568.–
694.–
883.–
1260.–
157.–
157.–
–
–
–
–
37.90
37.90
–
40.20
40.20
–
69.30
42.–
95.90
82.10
44.30
112.–
101.–
46.90
126.–
138.–
–
–
–
–
302.–
193.–
310.–
225.–
319.–
252.–
346.–
336.–
–
–
245.–
274.–
302.–
333.–






243.-
257.-
270.–
312.–
399.–
494.–






20.80
91.50
20.80
106.-
27.–
106.–
27.–
106.–
31.90
122.–
31.90
122.–
–
–
500.–
526.–
552.–
581.–
93.10
798.–
232.–
93.10
798.–
232.–
136.–
916.–
255.–
136.–
916.–
255.–
180.–
1060.–
388.–
207.–
1320.–
388.–
171.–
201.–
229.–
257.–
287.–
356.–
446.–
472.–
500.–
526.–
552.–
581.–
446.–
472.–
500.–
526.–
552.–
581.–


180.–
214.–
249.–
287.–
990.–
990.–
990.–
990.–
990.–
990.–
1000.–
1000.–
1050.–
1050.–
1100.–
1100.–

167.–
For legends and footnotes, see Page 4/48.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/47
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Aluminum series 1MB10
Special versions
1MB10 . . - . . . . . - . . . . -Z
Rating plate and extra rating plates
Second rating plate, loose
Rating plate, stainless steel
Extra rating plate or rating plate with
deviating rating plate data
4
10
Additional
identification
code -Z
with order
code and
plain text
if required
Order code
Motor category
•
–
30
On
request
Motor
version
Motor type
(alum.)
Ex t (Zone 21/22)
Ex n (Zone 2)
IE1 Standard
Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE2 High Efficiency
Ex t (Zone 21/22)
Ex n (Zone 2)
IE3 Premium
Efficiency
Motor
version
1MB10.2
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
1MB10.2
1MB10.1
1MB10.1
1MB10.3
1MB10.3
Motor
type
Frame size
80
90
100
112
132
160
all
all
all
20.10
40.20
70.80
20.10
40.20
70.80
20.10
40.20
103.–
20.10
40.20
125.–
20.10
40.20
159.–
20.10
40.20
198.–
all
39.50
39.50
39.50
39.50
39.50
39.50
all
39.50
39.50
39.50
39.50
39.50
39.50
all






all
27.30
27.30
27.30
27.30
27.30
27.30
all
65.–
65.–
65.–
65.–
65.–
65.–
all
4720.-
5400.-
6070.–
6470.–
7020.–
7420.–
all
all
all
all

–
–
61.20

–
–
61.20

27.50
27.50
61.20

27.50
27.50
61.20

27.50
27.50
61.20

27.50
27.50
61.20
M10
all
M11
all
Y80 • and
all
identification
code
Y82 •and
all
Extra rating plate with identification
identification
codes
code
Additional information on rating plate
Y84 • and
all
and on package label (max. 20
identification
characters)
code
Packaging, safety notes, documentation and test certificates
Printed Operating Instructions
all
(compact) for explosion-proof motors
enclosed in English and German 11)
Acceptance test certificate 3.1 in
B02
all
accordance with EN 10204 10)
Printed German/English Operating
B04
all
Instructions enclosed
Type test with heat run for horizontal
B83
all
motors, without acceptance
Wire-lattice pallet packaging
B99
all
Connected in star for dispatch
M01
all
Connected in delta for dispatch
M02
all
Printed Operating Instructions
Y98 • and
all
(compact) for explosion-proof motors
identification
enclosed in other official EU
code
languages 11)


20
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
Not possible
1)
Please inquire regarding combination with order codes D03 and C02.
Not possible in combination with order codes H20 and H22.
2)
No derating in combination with the following order code M2A, M2B, M2C,
M2D, M2E, M2F, M2G, M2H.
3)
Not possible for type of construction IM V3.
4)
For Zone 21, IP65 degree of protection is standard. Not possible for
Zone 22, because only IP55 degree of protection is required.
5)
Not admissible for Zone 21 (IP65 degree of protection) and Zone 22
(IP55 degree of protection).
6)
Supplied with the condensation drainage holes sealed at the drive end
DE and non-drive end NDE (IP55, IP56, IP65). If the condensation
drainage holes are required for motors of the IM B6, IM B7 or IM B8 type
of construction (feet on side or top), the motors must be ordered in the
respective type of construction and with order code H03, so that the
condensation drainage holes will be placed in the correct position.
4/48
Siemens D 81.1 P · 03/2015
7)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Not valid for: Conical shafts, non-standard threaded journals, non-standard shaft tolerances, friction welded
journals, extremely "thin" shafts, special geometry dimensions (e.g. square
journals), hollow shafts. Valid for non-standard shaft extensions DE or
NDE. The feather keys are supplied in every case. For order codes Y58,
Y59 and L05, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension
For an explanation of the order codes, see Catalog D 81.1 · 2014 Part 1
"Introduction".
8)
The metal external fan is not possible in combination with the low-noise
version – Order code F77 or F78.
9)
In combination with the 15th position of the Article No. "H", order codes
Q02 and Q03 are not possible for frame sizes 100 to 160.
It can only be supplied with a star or delta winding for direct switch-on
(3 terminals).
10)
The delivery time for the acceptance test certificate may differ from the
delivery time for the motor.
11)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Standard delivery times in working days:
10
20
30
Supplements to article numbers and special versions
On
request
Options
Cast-iron series 1MB15 Basic Line, 1MB16 Performance Line
■ Selection and ordering data
Special versions
Additional
identification
code
-Z
with
order
code
and
plain
text if
required
Order
1MB15/6 . . - . . . . . - . . . . -Z code
Design for Zones according to ATEX
B30
Design (IP55) for Zone 2 and 22,
for non-conductive dust 1)
Version for Zone 2 in
B31
Ex nA IIB T3 Gc
VIK version
C02
Motor protection (bearing protection)
Q72
Installation of 2 Pt100 screw-in
resistance thermometers in basic
circuit for rolling-contact bearings
Motor category
Motor
version
Motor
type
(castiron)
Ex t (Zone 21/22) 1MB15.1
Ex n (Zone 2)
1MB16.1
IE2 High
Efficiency
Ex t (Zone 21/22) 1MB15.3
Ex n (Zone 2)
1MB16.3
IE3 Premium
Efficiency
Motor
Motor
version
type
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
315
1MB15.1
1MB16.1
1MB15.3
1MB16.3
Frame size
100
112
132
160
180
200
225
250
280
315
Zone 2 Ex n
1MB1.3
104.–
122.–
183.–
266.–
473.–
580.–
651.–
685.–
725.–
765.–
Zone 2 Ex n
1MB1.3










Zone 2 Ex n
1MB1.3
84.–
86.–
102.–
102.–
176.–
184.–
208.–
317.–
547.–
849.–
all
all
–
–
–
–
4100.– 4100.– 4100.– 4100.– 4100.– 4100.–
Q78
all
all
–
–
–
–
4500.– 4500.– 4500.– 4500.– 4500.– 4500.–
Installation of 2 Pt100 double
Q79
screw-in resistance thermometers
in 3-wire circuit for rolling-contact
bearings 2) 3)
Motor connection and connection box
External grounding
Rotation of the connection box
R10
through 90°, entry from DE
Rotation of the connection box
R11
through 90°, entry from NDE
Rotation of the connection box
R12
through 180°
Stud terminal for cable connection, R17
accessories pack (3 items)
Cable gland, max. configuration,
R18
certified according to ATEX
Saddle terminal for connection
R19
without cable lug, accessories
pack (6 items)
Larger connection box
R50
Auxiliary terminal box,
R62
cast-iron (small)
Windings and insulation
Temperature class 155 (F), used
N05
acc. to 130 (B), coolant temperature
4)
45 °C, derating approx. 4 %
Temperature class 155 (F), used
N06
acc. to 130 (B), coolant temperature
4)
50 °C, derating approx. 8 %
Temperature class 155 (F), used
N07
acc. to 130 (B), coolant temperature
4)
55 °C, derating approx. 13 %
Temperature class 155 (F), used
N08
acc. to 130 (B), coolant temperature
60 °C, derating approx. 18 %
Increased air humidity/temperature N20
with 30 to 60 g water per m3 of air
Increased air humidity/temperature N21
with 60 to 100 g water per m3 of air
all
all
–
–
–
–
–
–
–
–
5400.– 5400.–
all
all
all
all














42.90
55.60
68.60
82.40
98.40
118.–
all
all




42.90
55.60
68.60
82.40
98.40
118.–
all
all




42.90
55.60
68.60
82.40
98.40
118.–
Zone 21 Ex tb
Zone 22 Ex tc
all
1MB1.1
1MB1.2
all
–
–
–
–
–
–
–
143.–
143.–
180.–
224.–
224.–
224.–
276.–
276.–
306.–
306.–
420.–
420.–
420.–
Standard version for
1MB153, 1MB163
–
–
–
–
–
–
–
700.–
700.–
700.–
all
all
all
all
274.–
–
274.–
–
319.–
–
355.–
–
1220.– 1220.– 1580.– 1810.– 1810.– 2130.–
270.– 270.– 270.– 270.– 270.– 270.–
all
all
46.–
46.–
61.20
61.20
78.–
78.–
88.60
88.60
104.–
104.–
all
all
46.–
46.–
61.20
61.20
78.–
78.–
88.60
88.60
104.–
104.–
all
all
103.–
125.–
159.–
198.–
255.–
311.–
460.–
580.–
742.–
964.–
all
all
103.–
125.–
159.–
198.–
445.–
530.–
890.–
1300.– 1390.– 1730.–
all
all
141.–
141.–
141.–
214.–
944.–
1200.– 1460.– 1790.– 2180.– 2670.–
all
all
275.–
309.–
334.–
444.–
4300.– 4690.– 5450.– 7190.– 8280.– 11800.–
2) 3)
Installation of 2 Pt100 screw-in
resistance thermometers in 3-wire
circuit for rolling-contact bearings
2) 3)
For legends and footnotes, see Page 4/52.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/49
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1MB15 Basic Line, 1MB16 Performance Line
Special versions
4
Additional
identification
code
-Z
with
order
code
and
plain
text if
required
Motor category
Motor
version
Motor
type
(castiron)
Ex t (Zone 21/22) 1MB15.1
Ex n (Zone 2)
1MB16.1
IE2 High
Efficiency
Ex t (Zone 21/22) 1MB15.3
Ex n (Zone 2)
1MB16.3
IE3 Premium
Efficiency
Motor
Motor
version
type
Order
1MB15/6 . . - . . . . . - . . . . -Z code
Windings and insulation (continued)
Y50 •
all
Temperature class 155 (F), used
acc. to 130 (B), with higher coolant and
specified
temperature and/or site altitude
output,
CT .. °C
or
SA …. m
above
sea level
Colors and paint finish
Standard version
Standard finish in RAL 7030
for 1MB15
stone gray
Unpainted (only cast-iron parts
S00
all
primed)
Unpainted, only primed
S01
all
Special finish sea air resistant
S03
all
Special paint for use offshore
S04
all
Special finish in RAL 7030
S10
Standard version
stone gray
for 1MB16
Special finish in special RAL colors: Y51 •
all
For RAL colors, see "Special finish and
in special RAL colors"
special
(see Catalog D 81.1 Part 1)
finish
RAL ….
Standard finish in other standard
Y53 •
all
RAL colors: RAL 1002, 1013, 1015, and
1019, 2003, 2004, 3000, 3007,
standard
5007, 5009, 5010, 5012, 5015,
finish
5017, 5018, 5019, 6011, 6019,
RAL ….
6021, 7000, 7001, 7004, 7011,
7016, 7022, 7031, 7032, 7033,
7035, 9001, 9002, 9005
(see Catalog D 81.1 Part 1)
Special finish in other standard RAL Y54 •
all
colors: RAL 1002, 1013, 1015,
and
1019, 2003, 2004, 3000, 3007,
special
5007, 5009, 5010, 5012, 5015,
finish
5017, 5018, 5019, 6011, 6019,
RAL ….
6021, 7000, 7001, 7004, 7011,
7016, 7022, 7031, 7032, 7033,
7035, 9001, 9002, 9005
(see Catalog D 81.1 Part 1)
Mechanical design and degrees of protection
Low-noise version for 2-pole motors F77
all
with clockwise direction of rotation
Low-noise version for 2-pole motors F78
all
with counter-clockwise direction of
rotation
Protective cover
H00
all
Vibration-proof version (continuous H02
all
vibration resistance according to
class 3M4 in accordance with
IEC 721-3-3:1994)
Condensation drainage holes 7)
all
Rust-resistant screws (externally) H07
all
IP65 degree of protection 5)
H20
Ex n (Zone 2)
IP56 degree of protection 6)
H22
Ex n (Zone 2)
Drive-end seal for flange-mounting H23
all
motors, oil-tight to 0.1 bar
Not possible for type of
construction IM V3
Next larger standard flange
P01
all
10
20
30
On
request
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
315
1MB15.1
1MB16.1
1MB15.3
1MB16.3
Frame size
100
112
132
160
180
200
225
250
280
154.–
186.–
240.–
295.–
382.–
469.–
690.–
868.–
1110.– 1440.–










all










all
all
all
26.50
658.–
2050.–
98.30
26.50
658.–
2160.–
98.30
42.20
703.–
2270.–
129.–
42.20
703.–
2390.–
129.–
79.30
718.–
2510.–
180.–
79.30
739.–
2640.–
225.–
79.30
771.–
3050.–
334.–
79.30
798.–
3970.–
404.–
79.30
825.–
4970.–
497.–
79.30
851.–
7680.–
638.–
all
745.–
745.–
745.–
787.–
787.–
787.–
787.–
848.–
848.–
848.–
1MB15
–
–
–
–
79.30
79.30
79.30
90.30
121.–
194.–
all
98.30
98.30
129.–
129.–
180.–
225.–
334.–
404.–
497.–
638.–
all
–
–
595.–
595.–
794.–
1400.– 1600.– 1700.– 2200.– 2600.–
all
–
–
595.–
595.–
794.–
1400.– 1600.– 1700.– 2200.– 2600.–
all
all
78.40
180.–
78.40
199.–
137.–
216.–
137.–
234.–
183.– 275.– 364.– 455.– 546.–
1000.– 1060.– 1100.– 1180.– 
729.–
all
all
1MB1.3
1MB1.3
all










78.70
143.–
158.–
54.80
78.70
143.–
158.–
59.90
93.10
143.–
158.–
73.10
93.10
214.–
235.–
107.–
107.–
287.–
313.–
138.–
121.–
356.–
393.–
171.–
162.–
430.–
473.–
227.–
193.–
502.–
551.–
302.–
201.–
572.–
631.–
379.–
267.–
644.–
707.–
455.–
all
45.40
56.70
56.70
–
–
–
–
–
–
–
all
315

For legends and footnotes, see Page 4/52.
4/50
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Standard delivery times in working days:
10
20
Special versions
30
Supplements to article numbers and special versions
On
request
Additional
identification
code
-Z
with
order
code
and
plain
text if
required
Options
Cast-iron series 1MB15 Basic Line, 1MB16 Performance Line
Motor category
Motor
version
Motor
type
(castiron)
Ex t (Zone 21/22) 1MB15.1
Ex n (Zone 2)
1MB16.1
IE2 High
Efficiency
Ex t (Zone 21/22) 1MB15.3
Ex n (Zone 2)
1MB16.3
IE3 Premium
Efficiency
Motor
Motor
version
type
Order
1MB15/6 . . - . . . . . - . . . . -Z code
Coolant temperature and site altitude
D03
all
all
Coolant temperature
–40 °C to +40 °C
Designs in accordance with standards and specifications
D37
all
all
IEC Ex certification
Bearings and lubrication
L20
all
all
Located bearing DE
Located bearing NDE
L21
all
all
Bearing design for increased
L22
all
all
cantilever forces
Regreasing device
L23
Standard version
for 1MB16 with
frame size 160 and above
Special bearing for DE and NDE,
L25
Standard version
bearing size 63
for 1MB16
Measuring nipple for SPM shock
Q01
all
all
pulse measurement for bearing
inspection
Balance and vibration quantity
all
all
Vibration quantity level A
Vibration quantity level B
L00
all
all
Half-key balancing
all
all
Balancing without key,
L01
all
all
key is supplied
Full-key balancing
L02
all
all
Shaft and rotor
L04
all
all
Shaft extension with standard
dimensions, without feather keyway
Second standard shaft extension
L05
all
all
Standard shaft made of stainless
L06
all
all
steel
Concentricity of shaft extension in L07
all
all
accordance with DIN 42955
Tolerance R
Concentricity of shaft extension,
L08
all
all
coaxiality and linear movement in
accordance with DIN 42955 Tolerance R for flange-mounting motors
Non-standard cylindrical shaft
Y58 •
all
all
extension DE 8)
and identification
code
Non-standard cylindrical shaft
Y59 •
all
all
8)
extension NDE
and identification
code
Heating and ventilation
F76
Ex n (Zone 2)
1MB1.3
Metal external fan 9)
Anti-condensation heating
Q02
all
all
for 230 V 3)
Anti-condensation heating
Q03
all
all
for 115 V 3)
Rating plate and extra rating plates
M10
all
all
Second rating plate, loose
Rating plate, stainless steel
M11
all
all
Extra rating plate or rating plate
Y80 •
all
all
with deviating rating plate data
and identification
code
Extra rating plate with identification Y82 •
all
all
codes
and identification
code
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
315
1MB15.1
1MB16.1
1MB15.3
1MB16.3
Frame size
100
112
132
160
568.–
694.–
883.–
1260.– 1520.– 1770.– 2140.– 2650.– 3530.– 4670.–
211.–
211.–
211.–
221.–
211.–
322.–
322.–
426.–
624.–
742.–
69.30
42.–
95.90
82.10
44.30
112.–
101.–
46.90
126.–
138.–
291.–
404.–
568.–
731.–
946.–
1020.–







167.–
265.–
307.–
346.–
400.–
448.–
500.–
302.–
310.–
319.–
346.–
364.–
410.–
455.–
546.–


193.–
225.–
252.–
336.–
446.–
549.–
780.–
1080.– 

245.–
274.–
302.–
333.–
359.–
388.–
417.–
446.–
474.–
503.–










270.–
312.–
399.–
494.–
775.–
780.–
856.–
1090.– 1270.– 1630.–










27.–
27.–
31.90
31.90
41.60
41.60
56.40
56.40
68.60
79.60
106.–
106.–
122.–
122.–
154.–
154.–
199.–
199.–
199.–
199.–
500.–
526.–
552.–
581.–
674.–
742.–
809.–
877.–
944.–
1010.–
136.–
160.–
136.–
220.–
180.–
340.–
207.–
540.–
313.–
643.–
347.–
959.–
365.– 381.– 450.– 494.–
1320.– 1570.– 2620.– 3190.–
255.–
255.–
388.–
388.–
201.–
226.–
269.–
352.–
352.–
538.–
229.–
257.–
287.–
356.–
430.–
502.–
572.–
644.–
717.–
787.–
500.–
526.–
552.–
581.–
674.–
742.–
809.–
877.–
944.–
1010.–
500.–
526.–
552.–
581.–
674.–
742.–
809.–
877.–
944.–
1010.–
180.–
990.–
214.– 249.– 287.– 322.– 356.– 393.– 430.– 465.– 502.–
1000.– 1050.– 1100.– 1150.– 1200.– 1250.– 1300.– 1300.– 1350.–
990.–
1000.– 1050.– 1100.– 1150.– 1200.– 1250.– 1300.– 1300.– 1350.–
20.10
40.20
103.–
20.10
40.20
125.–
20.10
40.20
159.–
20.10
40.20
198.–
64.40
49.10
255.–
64.40
49.10
311.–
64.40
66.–
460.–
64.40
66.–
580.–
64.40
66.–
742.–
64.40
66.–
964.–
39.50
39.50
39.50
39.50
66.–
66.–
66.–
82.40
82.40
104.–
180
200
225
250
280
315
For legends and footnotes, see Page 4/52.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/51
4
© Siemens AG 2015
SIMOTICS XP 1MB Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1MB15 Basic Line, 1MB16 Performance Line
Special versions
Additional
identification
code
-Z
with
order
code
and
plain
text if
required
Motor category
Motor
version
Motor
type
(castiron)
Ex t (Zone 21/22) 1MB15.1
Ex n (Zone 2)
1MB16.1
IE2 High
Efficiency
Ex t (Zone 21/22) 1MB15.3
Ex n (Zone 2)
1MB16.3
IE3 Premium
Efficiency
Motor
Motor
version
type
Order
1MB15/6 . . - . . . . . - . . . . -Z code
Rating plate and extra rating plates (continued)
Y84 •
all
Additional information on rating
and idenplate and on package label
tification
(max. 20 characters)
code
Packaging, safety notes, documentation and test certificates
all
Printed Operating Instructions
(compact) for explosion-proof
motors enclosed in English and
German 11)
Acceptance test certificate 3.1
B02
all
in accordance with EN 10204 10)
Printed German/English Operating B04
all
Instructions (compact) enclosed
Type test with heat run for horizontal B83
all
motors, with acceptance
Wire-lattice pallet packaging
B99
all
M01
all
Connected in star for dispatch
Connected in delta for dispatch
M02
all
Printed Operating Instructions
Y98 •
all
(compact) for explosion-proof
and idenmotors enclosed in other official
tification
EU languages 11)
code
4


•
–
10
20
30
On
request
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
315
1MB15.1
1MB16.1
1MB15.3
1MB16.3
Frame size
100
112
132
160
180
200
225
250
280
315
all
39.50
39.50
39.50
39.50
66.–
66.–
66.–
82.40
82.40
104.–
all










all
27.30
27.30
27.30
27.30
27.30
27.30
27.30
27.30
27.30
27.30
all
65.–
65.–
65.–
65.–
65.–
65.–
65.–
65.–
65.–
65.–
all
6070.– 6470.– 7020.– 7420.– 9400.– 9400.– 12400.– 12400.– 13600.– 13600.–
all
all
all
all

27.50
27.50
61.20

27.50
27.50
61.20

27.50
27.50
61.20

27.50
27.50
61.20
–
36.10
36.10
61.20
–
36.10
36.10
61.20
–
36.10
–
44.70
–
44.70
–
44.70




61.20
61.20
61.20
61.20
Standard version
Without additional charge
This order code only determines the price of the version –
Additional plain text is required.
Not possible
1)
Please inquire regarding combination with order codes D03 and C02.
Not possible in combination with order codes H20 and H22.
2)
Evaluation with appropriate tripping unit (see Catalog IC 10) is
recommended. A certified tripping unit is necessary for use in hazardous
areas.
3)
In combination with the 15th position of MLFB "H", order codes Q02 and
Q03 are not possible for frame sizes 100 to 160. It can only be supplied
with a star or delta winding for direct switch-on (3 terminals).
4)
No derating in combination with the following order code M2A, M2B, M2C,
M2D, M2E, M2F, M2G, M2H.
5)
For Zone 21, IP65 degree of protection is standard. Not possible for
Zone 22, because only IP55 degree of protection is required.
6)
Not admissible for Zone 21 (IP65 degree of protection) and Zone 22
(IP55 degree of protection).
7)
Supplied with the condensation drainage holes sealed at the drive end
DE and non-drive end NDE (IP55, IP56, IP65). If the condensation
drainage holes are required for motors of the IM B6, IM B7 or IM B8 type
of construction (feet on side or top), the motors must be ordered in the
respective type of construction and with order code H03, so that the
condensation drainage holes will be placed in the correct position.
4/52
Siemens D 81.1 P · 03/2015
8)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Not valid for: Conical shafts, non-standard threaded journals, non-standard shaft tolerances, friction welded
journals, extremely "thin" shafts, special geometry dimensions (e.g. square
journals), hollow shafts. Valid for non-standard shaft extensions DE or
NDE. The feather keys are supplied in every case. For order codes Y58,
Y59 and L05, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension
For an explanation of the order codes, see Catalog D 81.1 · 2014 Part 1
"Introduction".
9)
The metal external fan is not possible in combination with the low-noise
version – Order code F77 or F78.
10)
The delivery time for the acceptance test certificate may differ from the
delivery time for the motor.
11)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
30
On
request
Options
Aluminum series 1MA7
■ Selection and ordering data
Special versions
Additional
identification
code -Z with
order code
and plain text
if required
1MA7 . . . - . . . . . -Z
Design for Zones according to ATEX
T1/T2 on rating plate 1)
C30
Motor protection
Motor protection with PTC thermistors A11
with 3 embedded temperature
sensors for tripping 2)
Motor protection with PTC thermistors A12
with 6 embedded temperature
sensors for alarm and tripping 2)
Motor connection and connection box
Connection box on RHS
K09
Connection box on LHS
K10
Rotation of the connection box
K83
through 90°, entry from DE
Rotation of the connection box
K84
through 90°, entry from NDE
Rotation of the connection box
K85
through 180°
Windings and insulation
Increased air humidity/temperature
C19
with 30 to 60 g water per m3 of air
Temperature class 155 (F), used acc. C22
to 130 (B), coolant temperature 45 °C,
derating approx. 4 % 3)
Temperature class 155 (F), used acc. C23
to 130 (B), coolant temperature 50 °C,
derating approx. 8 % 3)
Temperature class 155 (F), used acc. C24
to 130 (B), coolant temperature 55 °C,
derating approx. 13 % 3)
Temperature class 155 (F), used acc. C25
to 130 (B), coolant temperature 60 °C,
derating approx. 18 % 3)
C26
Increased air humidity/temperature
with 60 to 100 g water per m3 of air
Colors and paint finish
Special finish in RAL 7030
stone gray
Unpainted (only cast-iron parts
K23
primed)
Unpainted, only primed
K24
Special paint for use offshore
M91
Special finish in special RAL colors: Y51 • and
For RAL colors, see "Special finish in special finish
special RAL colors" in Catalog
RAL ….
D 81.1 · 2008 Part 0 "Introduction"
Special finish in other standard RAL Y54 • and
colors: RAL 1002, 1013, 1015, 1019, special finish
2003, 2004, 3000, 3007, 5007, 5009, RAL ….
5010, 5012, 5015, 5017, 5018, 5019,
6011, 6019, 6021, 7000, 7001, 7004,
7011, 7016, 7022, 7031, 7032, 7033,
7035, 9001, 9002, 9005
(see Catalog D 81.1 · 2008
Part 0 "Introduction")
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
Motor type Motor type – Frame size
version
(alum.)
63
71
80
90
100
112
132
160
Zone 1 Ex e II. 1MA7
1MA7
Motor
Motor
Frame size
version
type
63
71
80
90
100
112
132
160
all
all
–
–
–
–
–
–


all
all
96.80
96.80
111.–
111.–
126.–
126.–
185.–
185.–
all
all
165.–
165.–
191.–
191.–
215.–
215.–
285.–
285.–
all
all
all
all
all
all
–
–
16.80
–
–
18.60
37.–
37.–
20.40
41.70
41.70
24.–
107.–
107.–
61.–
116.–
116.–
75.90
127.–
127.–
101.–
135.–
135.–
124.–
all
all
16.80
18.60
20.40
24.–
61.–
75.90
101.–
124.–
all
all
16.80
18.60
20.40
24.–




all
all
153.–
153.–
153.–
153.–
153.–
153.–
153.–
232.–
all
all
42.70
42.70
42.70
42.70
50.–
50.–
66.10
66.10
all
all
42.70
42.70
42.70
42.70
50.–
50.–
66.10
66.10
all
all
59.50
69.80
79.10
92.80
115.–
139.–
178.–
219.–
all
all
59.50
69.80
79.10
92.80
115.–
139.–
178.–
219.–
all
all
279.–
279.–
289.–
289.–
297.–
334.–
361.–
480.–
all
all








all
all








all
all
all
all
all
all
21.50
O. R.
572.–
21.50
O. R.
572.–
21.50
O. R.
685.–
28.70
O. R.
685.–
28.70
O. R.
775.–
28.70
O. R.
775.–
45.70
O. R.
775.–
45.70
O. R.
818.–
all
all
63.–
63.–
63.–
63.–
106.–
106.–
139.–
139.–
For legends and footnotes, see Page 4/55.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/53
4
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Aluminum series 1MA7
Special versions
4
10
Additional
identification
code -Z with
order code
and plain text
if required
20
30
On
request
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
Motor type Motor type – Frame size
version
(alum.)
63
71
80
90
100
112
132
160
Zone 1 Ex e II. 1MA7
1MA7
Motor
Motor
Frame size
version
type
63
71
80
90
100
112
132
160
1MA7 . . . - . . . . . -Z
Mechanical design and degrees of protection
Drive-end seal for flange-mounting
K17
all
motors, oil-tight to 0.1 bar
Not possible for type of construction
IM V3
all
Low-noise version for 2-pole motors K37
with clockwise direction of rotation 4)
Low-noise version for 2-pole motors K38
all
with counter-clockwise direction of
rotation 4)
Degree of protection IP65
K50
all
Degree of protection IP56
K52
all
Vibration-proof version
L03
all
Condensation drainage holes 5)
L12
all
Rust-resistant screws (externally)
M27
all
Coolant temperature and site altitude
Coolant temperature –40 °C to +40 °C D19
all
for explosion-proof motors 6)
Designs in accordance with standards and specifications
Ex certification for Russia
D35
all
VIK version
K30
all
Bearings and lubrication
Bearing design for increased
K20
all
cantilever forces
Regreasing device
K40
all
Located bearing DE
K94
all
Located bearing NDE
L04
all
Balance and vibration quantity
Vibration quantity level A
all
Vibration quantity level B
K02
all
Full-key balancing
L68
all
Balancing without key
M37
all
Shaft and rotor
Concentricity of shaft extension,
K04
all
coaxiality and linear movement in
accordance with DIN 42955
Tolerance R flange-mounting motors 7)
K16
all
Second standard shaft extension 8)
Shaft extension with standard
K42
all
dimensions without feather keyway
Concentricity of shaft extension
L39
all
in accordance with DIN 42955
Tolerance R
Non-standard cylindrical
Y58 • and
all
shaft extension DE 9)
identification
code
Non-standard cylindrical
Y59 • and
all
shaft extension NDE 9)
identification
code
Heating and ventilation
Metal external fan
K35
all
Rating plate and extra rating plates
Second lubrication plate, loose
B06
all
Second rating plate, loose
K31
all
Extra rating plate or rating plate
Y80 • and
all
with deviating rating plate data
identification
code
Extra rating plate with identification
Y82 •and
all
codes
identification
code
Additional information on rating plate Y84 • and
all
and on package label
identification
(max. 20 characters)
code
all
44.90
47.10
49.70
53.20
59.30
64.80
79.–
115.–
all
–
–
–
–
–
–
644.–
644.–
all
–
–
–
–
–
–
644.–
644.–
all
all
all
all
all
155.–
268.–
108.–
54.30
–
155.–
268.–
128.–
62.20
–
155.–
268.–
147.–
69.70
69.70
155.–
268.–
166.–
77.70
69.70
155.–
294.–
187.–
85.10
85.10
155.–
294.–
207.–
92.90
85.10
155.–
294.–
225.–
101.–
101.–
232.–
294.–
243.–
108.–
101.–
all
272.–
342.–
410.–
479.–
615.–
751.–
955.–
1360.–
all
all
163.–
45.–
163.–
58.30
163.–
65.50
163.–
85.80
219.–
111.–
219.–
137.–
219.–
177.–
230.–
242.–
all
–
–
–
–
104.–
121.–
136.–
181.–
all
all
all
–
41.–
35.–
–
41.–
37.80
–
41.–
39.40
–
43.50
41.80
327.–
75.–
44.–
335.–
88.80
46.10
345.–
109.–
48.80
374.–
150.–
all
all
all
all








228.–
95.20
22.50
248.–
95.20
22.50
263.–
95.20
22.50
278.–
110.–
22.50
292.–
110.–
29.20
337.–
110.–
29.20
432.–
127.–
34.50
535.–
127.–
34.50
all
385.–
385.–
385.–
385.–
404.–
404.–
628.–
628.–
all
all
87.30
423.–
87.30
451.–
101.–
483.–
101.–
511.–
147.–
541.–
147.–
569.–
194.–
597.–
224.–
628.–
all
244.–
244.–
244.–
244.–
269.–
269.–
413.–
413.–
all
407.–
434.–
464.–
491.–
520.–
547.–
574.–
604.–
all
407.–
434.–
464.–
491.–
520.–
547.–
574.–
604.–
all
–
–
–
–
174.–
206.–
240.–
277.–
all
all
all
–
21.70
55.20
–
21.70
64.90
–
21.70
73.60
–
21.70
86.60
21.70
21.70
107.–
21.70
21.70
130.–
21.70
21.70
165.–
21.70
21.70
206.–
all
42.70
42.70
42.70
42.70
42.70
42.70
42.70
42.70
all
42.70
42.70
42.70
42.70
42.70
42.70
42.70
42.70

For legends and footnotes, see Page 4/55.
4/54
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Standard delivery times in working days:
10
20
Special versions
30
Supplements to article numbers and special versions
On
request
Options
Aluminum series 1MA7
Additional
identification
code -Z with
order code
and plain text
if required
Motor category
Additional charges plus MS EUR, standard delivery time (colored area)
Motor
Motor type Motor type – Frame size
version
(alum.)
63
71
80
90
100
112
132
160
Zone 1 Ex e II. 1MA7
1MA7
Motor
Motor
Frame size
version
type
1MA7 . . . - . . . . . -Z
63
71
80
90
100
112
132
160
Packaging, safety notes, documentation and test certificates
Printed Operating Instructions
all
all








(compact) for explosion-proof motors
enclosed in English and German 11)
Acceptance test certificate 3.1
B02
all
all
29.50
29.50
29.50
29.50
29.50
29.50
29.50
29.50
in accordance with EN 10204 10)
Printed German/English Operating
B23
all
all
66.10
66.10
66.10
66.10
66.10
66.10
66.10
66.10
Instructions enclosed
Wire-lattice pallet packaging
L99
all
all








Printed Operating Instructions
Y98 • and
all
all
63.60
63.60
63.60
63.60
63.60
63.60
63.60
63.60
(compact) for explosion-proof motors identification
enclosed in other official EU
code
languages 12)
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


4
1)
2-pole 1MA motors of frame size 132 to 160 are designed as standard with
double rating plate (T1/T2 and T3). If the motors are designed to order
codes A11/A12 or voltage code "9", the T3 output will be stamped on the
rating plate as standard. Alternatively, the "T1/T2 output on the rating plate
when ordered with order code C30" can be stamped.
2)
Evaluation with appropriate 3RN1 tripping unit (see Catalog IC 10) is
recommended. A certified tripping unit is necessary for use in hazardous
areas. Motor protection by means of PTC thermistor as sole protection
available on request.
3)
The maximum possible certified output will be supplied. In the case of
motors with T2/T3 output, T3 output will be supplied. The T2 output must
be ordered with the order code C30.
4)
1MA7 motors are up to 80 mm longer than normal. A second shaft extension is not possible.
5)
Supplied with the condensation drainage holes sealed at the drive end DE
and non-drive end NDE for IP55, IP56 and IP65 degrees of protection. If
condensation drainage holes are required in motors of the IM B6, IM B7 or
IM B8 type of construction (feet located on side or top), it is necessary to
relocate the bearing plates at the drive end (DE) and non-drive end (NDE)
so that the condensation drainage holes situated between the feet on
delivery are underneath.
6)
Not possible in combination with vibration-proof version, order code L03.
7)
Can be combined with deep-groove bearings of series 60.., 62.. and 63…
Not possible in combination with parallel roller bearings (e.g. bearings for
increased cantilever forces, order code K20).
Recommended retail prices plus metal surcharges (MS)
8)
Not possible for low-noise version (2-pole) for frame sizes 132 S to 160 L.
Version with protective cover not possible. Version with protective cover
not possible.
9)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Not valid for: Conical shafts, non-standard threaded journals, non-standard shaft tolerances, friction welded
journals, extremely "thin" shafts, special geometry dimensions (e.g. square
journals), hollow shafts. Valid for non-standard shaft extensions DE
or NDE.
The feather keys are supplied in every case. For order codes Y58, Y59
and K16, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension
For explanation of the order codes, see Catalog D 81.1 · 2008 Part 0
"Introduction".
10)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
11)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300.
Siemens D 81.1 P · 03/2015
4/55
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1MA6
10
20
30
On
request
■ Selection and ordering data
Special versions
4
Additional
identification
code -Z
with order
code and
plain text
if required
1MA6 . . . - . . . . . -Z
Design for Zones according to ATEX
T1/T2 on rating plate 1)
C30
Motor protection
Motor protection with PTC thermistors A11
with 3 embedded temperature
sensors for tripping 2)
Motor protection with PTC thermistors A12
with 6 embedded temperature
sensors for alarm and tripping 2)
A72
Installation of 2 Pt100 screw-in
resistance thermometers in basic
2)
circuit for rolling-contact bearings
A78
Installation of 2 Pt100 screw-in
resistance thermometers in 3-wire
circuit for rolling-contact bearings 2)
Motor connection and connection box
Connection box on RHS
K09
Connection box on LHS
K10
Connection box in cast-iron version K15
Rotation of the connection box
K83
through 90°, entry from DE
Rotation of the connection box
K84
through 90°, entry from NDE
K85
Rotation of the connection box
through 180°
L00
Next larger connection box
Auxiliary connection box 1XB3 020
L97
Windings and insulation
Increased air humidity/temperature
C19
with 30 to 60 g water per m3 of air
Temperature class 155 (F), used acc. C22
to 130 (B), coolant temperature 45 °C,
derating approx. 4 % 3)
Temperature class 155 (F), used acc. C23
to 130 (B), coolant temperature 50 °C,
derating approx. 8 % 3)
Temperature class 155 (F), used acc. C24
to 130 (B), coolant temperature 55 °C,
derating approx. 13 % 3)
Temperature class 155 (F), used acc. C25
to 130 (B), coolant temperature 60 °C,
derating approx. 18 % 3)
C26
Increased air humidity/temperature
with 60 to 100 g water per m3 of air
Colors and paint finish
Standard finish in RAL 7030
stone gray
Unpainted (only cast-iron parts
K23
primed)
Unpainted, only primed
K24
Special finish in RAL 7030
K26
4)
stone gray
Special paint for use offshore
M91
Special finish sea air resistant
M94
Special finish in special RAL colors: Y51 • and
For RAL colors, see Special finish in special
special RAL colors" in Catalog
finish
D 81.1 · 2008 Part 0 "Introduction"
RAL ….
Y53 • and
Standard finish in other standard
standard
RAL colors: RAL 1002, 1013, 1015,
1019, 2003, 2004, 3000, 3007, 5007, finish
5009, 5010, 5012, 5015, 5017, 5018, RAL ….
5019, 6011, 6019, 6021, 7000, 7001,
7004, 7011, 7016, 7022, 7031, 7032,
7033, 7035, 9001, 9002, 9005
(see Catalog D 81.1 · 2008
Part 0 "Introduction")
Motor category
Motor
Motor
version
type
(castiron)
Zone 1
1MA6
Ex e II.
Motor
Motor
version
type
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
Frame size
100
112
132
160
180
200
225
250
280
315
all
all
–
–


–
–
–
–
–
–
all
all
126.–
126.–
185.–
185.–
236.–
236.–
322.–
322.–
401.–
401.–
all
all
215.–
215.–
285.–
285.–
417.–
417.–
542.–
542.–
673.–
673.–
all
all
–
–
–
–
–
–
O. R.
O. R.
O. R.
O. R.
all
all
–
–
–
–
–
–
O. R.
O. R.
O. R.
O. R.
all
all
all
all
all
all
all
all
126.–
126.–
135.–
135.–
147.–
147.–
215.–
215.–
790.–
790.–
888.–
888.–
1020.–
1020.–







24.–
24.–
24.–
24.–
450.–
450.–
1400
60.10
532.–
532.–

382.–
382.–
1400
46.40
74.20
89.10
106.–
128.–
all
all
24.–
24.–
24.–
24.–
46.40
60.10
74.20
89.10
106.–
128.–
all
all
24.–
24.–
24.–
24.–
46.40
60.10
74.20
89.10
106.–
128.–
all
all
all
all
–
–
–
–
–
–
–
–
1350.– 1350.– 1730.– 1990.– 1990.– 2350.–
–
–
552.– 552.– 552.– 552.–
all
all
153.–
153.–
153.–
232.–
312.–
385.–
1580.– 1930.– 2360.– 2890.–
all
all
49.70
49.70
66.10
66.10
84.30
84.30
95.80
95.80
112.–
112.–
all
all
49.70
49.70
66.10
66.10
84.30
84.30
95.80
95.80
112.–
112.–
all
all
115.–
139.–
178.–
219.–
286.–
349.–
516.–
651.–
834.–
1080.–
all
all
115.–
139.–
178.–
219.–
286.–
349.–
516.–
651.–
834.–
1080.–
all
all
297.–
334.–
361.–
480.–
596.–
623.–
7320.– 9470.– 11800. 16100.
–
–
all
all
–
–
–
–
–
–




all
all










all
all
all
all
28.70
28.70
45.70
45.70
85.80
85.80






85.80
361.–
85.80
437.–
85.80
538.–
85.80
691.–
all
all
all
all
all
all
O. R.
711.–
775.–
O. R.
711.–
775.–
O. R.
760.–
775.–
O. R.
760.–
818.–
O. R.
834.–
818.–
O. R.
834.–
818.–
O. R.
834.–
818.–
O. R.
920.–
882.–
O. R.
920.–
882.–
O. R.
920.–
882.–
all
all
–
–
–
–
–
–
85.80
97.70
131.–
210.–
315
1MA6
For legends and footnotes, see Page 4/58.
4/56
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
20
30
On
request
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
Options
Cast-iron series 1MA6
Motor category
Motor
Motor
version
type
(castiron)
Zone 1
1MA6
Ex e II.
Motor
Motor
version
type
1MA6 . . . - . . . . . -Z
Colors and paint finish (continued)
Special finish in other standard
Y54 • and
all
RAL colors: RAL 1002, 1013, 1015,
special
1019, 2003, 2004, 3000, 3007, 5007, finish
5009, 5010, 5012, 5015, 5017, 5018, RAL ….
5019, 6011, 6019, 6021, 7000, 7001,
7004, 7011, 7016, 7022, 7031, 7032,
7033, 7035, 9001, 9002, 9005
(see Catalog D 81.1 · 2008
Part 0 "Introduction")
Mechanical design and degrees of protection
Drive-end seal for flange-mounting
K17
all
motors, oil-tight to 0.1 bar
Not possible for type of construction
IM V3, frame size 180 M and above
only available for 4-pole to 6-pole
motors
Low-noise version for 2-pole motors K37
all
with clockwise direction of rotation 5)
all
Low-noise version for 2-pole motors K38
with counter-clockwise direction of
5)
rotation
K50
all
Degree of protection IP65
Degree of protection IP56
K52
all
Vibration-proof version
L03
all
Condensation drainage holes 6)
L12
all
Rust-resistant screws (externally)
M27
all
Coolant temperature and site altitude
Coolant temperature -40 °C to +40 °C D19
all
for explosion-proof motors 7)
Designs in accordance with standards and specifications
Ex certification for Russia
D35
all
VIK version
K30
all
Bearings and lubrication
Measuring nipple for SPM shock pulse G50
all
measurement for bearing inspection
K20
all
Bearing design for increased
cantilever forces 8)
Regreasing device
K40
all
Located bearing DE
K94
all
Located bearing NDE
L04
all
Balance and vibration quantity
all
Vibration quantity level A
Vibration quantity level B
K02
all
Full-key balancing
Balancing without key
Shaft and rotor
Concentricity of shaft extension,
coaxiality and linear movement in
accordance with DIN 42955 Tolerance R for flange-mounting motors 9)
Second standard shaft extension 10)
Shaft extension with standard
dimensions, without feather keyway
Concentricity of shaft extension in
accordance with DIN 42955
Tolerance R
Non-standard cylindrical
shaft extension DE 11)
Non-standard cylindrical
shaft extension NDE 11)
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
315
1MA6
Frame size
100
112
132
160
180
200
225
250
280
315
all
106.–
106.–
139.–
139.–
194.–
243.–
361.–
437.–
538.–
691.–
all
59.30
64.80
79.–
115.–
150.–
185.–
245.–
327.–
410.–
492.–
all
–
–
644.–
644.–
859.–
859.–
1370.– 1580.– 1880.– 2460.–
all
–
–
644.–
644.–
859.–
859.–
1370.– 1580.– 1880.– 2460.–
all
all
all
all
all
155.–
294.–
187.–
85.10
85.10
155.–
294.–
207.–
92.90
85.10
155.–
294.–
225.–
101.–
101.–
232.–
294.–
–
108.–
101.–
653.–
653.–
–
115.–
115.–
716.–
716.–
–
124.–
131.–
758.–
758.–
–
970.–
970.–
–
1110.– 1240.–
1110.– 1240.–
–
–




175.–
209.–
217.–
289.–
all
615.–
751.–
955.–
1360.– 1640.– 1910.– 2320.– 2870.– 3820.– 5050.–
all
all
219.–
111.–
219.–
137.–
219.–
177.–
230.–
242.–
230.–
316.–
335.–
421.–
335.–
613.–
443.–
742.–
649.– 772.–
1190.– 2320.–
all
–
–
–
–
395.–
395.–
395.–
395.–
395.–
395.–
all
104.–
121.–
136.–
181.–
262.–
302.–
339.–
394.–
441.–
492.–
all
all
all
327.–
75.–
45.40
335.–
88.80
47.90
345.–
109.–
50.80
374.–
150.–
443.–
437.–
–
492.–
–
–
591.–
–
–



394.–
315.–
–
–
–
–
–
all
all










292.–
337.–
432.–
535.–
610.–
684.–
926.–
1180.– 1370.– 1770.–
9)
9)
9)
9)
L68
M37
all
all
all
all
110.–
29.20
110.–
29.20
127.–
34.50
127.–
34.50
160.–
45.–
160.–
45.–
207.–
61.–
207.–
61.–
207.–
74.20
207.–
86.10
K04
all
all
404.–
404.–
628.–
628.–
369.–
369.–
369.–
437.–
437.–
765.–
K16
K42
all
all
all
all
147.–
541.–
147.–
569.–
194.–
597.–
224.–
628.–
339.–
729.–
375.–
803.–
395.–
875.–
412.–
948.–
487.– 535.–
1020.– 1090.–
L39
all
all
269.–
269.–
413.–
413.–
213.–
239.–
285.–
375.–
375.–
572.–
Y58 • and
all
identification
code
Y59 • and
all
identification
code
all
520.–
547.–
574.–
604.–
701.–
772.–
841.–
912.–
982.–
1050.–
all
520.–
547.–
574.–
604.–
701.–
772.–
841.–
912.–
982.–
1050.–
For legends and footnotes, see Page 4/58.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/57
4
© Siemens AG 2015
SIMOTICS XP 1MA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1MA6
Special versions
10
Additional
identification
code -Z
with order
code and
plain text
if required
Motor category
Motor
Motor
version
type
(castiron)
Zone 1
1MA6
Ex e II.
Motor
Motor
version
type
1MA6 . . . - . . . . . -Z
Heating and ventilation
Metal external fan
K35
all
all
Anti-condensation heating for 230 V K45
all
all
Anti-condensation heating for 115 V K46
all
all
Rating plate and extra rating plates
Second lubrication plate, loose
B06
all
all
Second rating plate, loose
K31
all
all
Extra rating plate or rating plate
Y80 • and
all
all
with deviating rating plate data
identification
code
Y82 • and
all
all
Extra rating plate with identification
identification
codes
code
all
all
Additional information on rating plate Y84 • and
identification
and on package label
code
(max. 20 characters)
Packaging, safety notes, documentation and test certificates
Printed Operating Instructions
all
all
(compact) for explosion-proof motors
13)
enclosed in English and German
Acceptance test certificate 3.1
B02
all
all
in accordance with EN 10204 12)
B23
all
all
Printed German/English Operating
Instructions enclosed
Wire-lattice pallet packaging
L99
all
all
Printed Operating Instructions
Y98 • and
all
all
(compact) for explosion-proof motors identification
enclosed in other official EU
code
languages 13)
4
20
30
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
On
request
315
1MA6
Frame size
100
112
132
160
180
200
225
194.–
–
–
232.–
–
–
269.–
–
–
310.–
–
–
435.–
–
–
435.–
–
–
765.– 816.– 816.– 926.–
1210.– 1310.– 1450.– 1450.–
1210.– 1310.– 1450.– 1450.–
21.70
21.70
107.–
21.70
21.70
130.–
21.70
21.70
165.–
21.70
21.70
206.–
69.70
69.70
265.–
69.70
69.70
323.–
69.70
69.70
478.–
69.70
69.70
603.–
69.70
69.70
772.–
69.70
69.70
1000.–
42.70
42.70
42.70
42.70
71.30
71.30
71.30
89.10
89.10
112.–
42.70
42.70
42.70
42.70
71.30
71.30
71.30
89.10
89.10
112.–










29.50
29.50
29.50
29.50
29.50
29.50
29.50
29.50
29.50
29.50
66.10
66.10
66.10
66.10
66.10
66.10
66.10
66.10
66.10
66.10

63.60

63.60

63.60

63.60

63.60

63.60
–
63.60
–
63.60
–
63.60
–
63.60
250
280
315
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


1)
2)
2-pole 1MA motors of frame size 132 to 160 are designed as standard with
double rating plate (T1/T2 and T3). If the motors are designed to order
codes A11/A12 or voltage code "9", the T3 output will be stamped on the
rating plate as standard. Alternatively, the "T1/T2 output on the rating plate
when ordered with order code C30" can be stamped.
Evaluation with appropriate 3RN1 tripping unit (see Catalog IC 10) is
recommended. A certified tripping unit is necessary for use in hazardous
areas. Motor protection with PTC thermistors is available as sole protection
up to frame size 160 L on request. With frame size 180 M and above, it is
not permitted as sole protection; motor protection switch is required.
3)
The maximum possible certified output will be supplied. In the case of
motors with T2/T3 output, T3 output will be supplied. The T2 output must
be ordered with the order code C30.
4)
For frame sizes 100 to 200, do not specify an order code. Order code is
only necessary for frame sizes 225 to 315.
5)
1MA6 motors are up to 80 mm longer than normal. A second shaft
extension is not possible.
6)
Supplied with the condensation drainage holes sealed at the drive end DE
and non-drive end NDE for IP55, IP56 and IP65 degrees of protection. If
condensation drainage holes are required in motors of the IM B6, IM B7 or
IM B8 type of construction (feet located on side or top), it is necessary to
relocate the bearing plates at the drive end (DE) and non-drive end (NDE)
so that the condensation drainage holes situated between the feet on
delivery are underneath.
7)
Not possible in combination with vibration-proof version, order code L03.
8)
Not possible for 2-pole 1MA6 motors, frame size 315 L in vertical types of
construction; bearings for increased cantilever forces at vibration quantity
level B are available on request for 1MA6 motors of frame size 225 M and
above. Not possible for 1MA6 motors of frame size 225 M and above in
combination with concentricity of shaft extension, coaxiality and linear
movement according to DIN 42955 Tolerance R for flange-mounting types.
4/58
Siemens D 81.1 P · 03/2015
9)
Can be combined with deep-groove bearings of series 60.., 62.. and 63…
Not possible in combination with parallel roller bearings (e.g. bearings for
increased cantilever forces, order code K20).
10)
For motors of frame size 180 M and above in vertical type of construction
in version with second shaft extension on request. Not possible for lownoise version (2-pole) for frame sizes 132 S to 160 L. Version with
protective cover not possible.
11)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Not valid for: Conical shafts, non-standard threaded journals, non-standard shaft tolerances, friction welded
journals, extremely "thin" shafts, special geometry dimensions (e.g. square
journals), hollow shafts. Valid for non-standard shaft extensions DE or
NDE. The feather keys are supplied in every case. For order codes Y58,
Y59 and K16, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension
For explanation of the order codes, see Catalog D 81.1 · 2008 Part 0
"Introduction".
12)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
13)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Standard delivery times in working days:
10
20
30
Supplements to article numbers and special versions
On
request
Options
Aluminum series 1LA7, 1LA5, 1LA9
■ Selection and ordering data
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
1LA . . . . - . . . . . -Z
Design for Zones according to ATEX 2)
Ex nA II on VIK rating plate
C27
VIK version (comprises Zone 2 K30
for mains-fed operation, without
Ex nA II marking on rating plate)
Motor category
Motor
version
Motor
type
(alum.)
Zone 2 Ex nA II, 1LA7
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LA9
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LA9
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor
version
type
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
63
71
80
90
100
112
132
160
180
200
225
1LA5 % 1)
1LA7 $
1LA9 &
1LA9 (
Frame size
63
71
80
90
100
112
132
160
180
only possible for & and ( 41.70 41.70 41.70 41.70 41.70 41.70 41.70 41.70 –
only possible for & and ( 136.– 156.– 177.– 199.– 225.– 261.– 333.– 421.– –
200
225
–
–
–
–
8)
Design for Zone 21, as well as
Zone 22 for conductive dust
(IP65) for mains-fed operation 7)
Design for Zone 22 for
non-conductive dust (IP55)
for mains-fed operation
Design for Zone 21, as well as
Zone 22 for conductive dust
(IP65) for converter-fed
operation, with derating 3) 5) 7)
Design for Zone 22 for
non-conductive dust (IP55)
for converter-fed operation,
with derating 3) 5)
Design for Zone 2 for mains-fed
operation Ex nA II T3 according
to IEC/EN 60079-15 3)
Design for Zone 2 for converterfed operation, with derating
Ex nA II T3 according to
IEC/EN 60079-15 3) 4) 5)
Design (IP55) for Zone 2 and 22,
for non-conductive dust, for
mains-fed operation 6)
Design (IP55) for Zone 2 and 22,
for non-conductive dust,
for converter-fed operation,
with derating 4) 5) 6)
Alternative converter
(SIMOVERT MASTERDRIVES,
SINAMICS G110,
SINAMICS G120 (for 1LA
motors) or ET 200S FC
Motor protection
With PTC thermistors for alarm
for converter-fed operation
in Zones 2, 21, 22 9)
Motor protection with PTC
thermistors with 3 embedded
temperature sensors for
tripping 9)
Motor protection with PTC
thermistors with 6 embedded
temperature sensors for alarm
and tripping 9)
Motor temperature detection
with embedded temperature
sensor KTY 84-130 9)
Motor temperature detection
with embedded temperature
sensors 2 x KTY 84-130 9)
Installation of 3 Pt100 resistance
thermometers 9) 10)
M34
all
all
142.– 166.– 188.– 211.– 231.– 261.– 320.– 444.– 628.– 1010.– 1390.–
M35
all
all
61.–
M38
all
all
237.– 261.– 296.– 319.– 353.– 383.– 462.– 586.– 909.– 1290.– 1730.–
M39
all
all
153.– 166.– 191.– 209.– 237.– 254.– 336.– 426.– 778.– 1010.– 1260.–
M72
all
all
93.10 112.– 133.– 147.– 177.– 210.– 265.– 353.– –
–
–
M73
all
all
326.– 370.– 413.– 425.– 462.– 492.– 570.– 675.– –
–
–
M74
all
all
123.– 136.– 150.– 164.– 178.– 191.– 245.– 382.– –
–
–
M75
all
all
357.– 395.– 432.– 442.– 463.– 472.– 550.– 702.– –
–
–
Y68 • and
converter
type ….
all
all



A10
only possible for $,
& and (
92.90 92.90 108.– 108.– 124.– 124.– 185.– 185.– 275.– 275.– –
A11
all
all
89.30 89.30 104.– 104.– 119.– 119.– 178.– 178.– 236.– 236.– 322.–
A12
all
all
152.– 152.– 175.– 175.– 203.– 203.– 271.– 271.– 417.– 417.– 542.–
A23
all
all
89.30 89.30 104.– 104.– 119.– 119.– 178.– 178.– 335.– 335.– 459.–
A25
all
all
179.– 179.– 209.– 209.– 238.– 238.– 356.– 356.– 544.– 544.– 748.–
A60
all
all
–
72.60 82.80 99.10 112.– 132.– 198.– 288.– 496.– 728.– 921.–

–

–

–





1500.– 1500.– 1500.– 1500.– 1500.– 1500.– 1500.–
For legends, see Page 4/63; for footnotes, see Page 4/64.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/59
4
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Aluminum series 1LA7, 1LA5, 1LA9
Special versions
4
Additional
identification
code -Z
with order
code and
plain text
if required
1LA . . . . - . . . . . -Z
Motor connection and connection box
One metal cable gland, certified J04
according to ATEX 8)
Connection box on RHS
K09
Connection box on LHS
K10
One metal cable gland 11)
K54
Cable gland, max. configuraK55
tion, certified according to ATEX
Rotation of the connection box K83
through 90°, entry from DE
Rotation of the connection box K84
through 90°, entry from NDE
Rotation of the connection box K85
through 180°
Next larger connection box
L00
External grounding
L13
Windings and insulation
Increased air humidity/
C19
temperature with 30 to 60 g
water per m3 of air
C22
Temperature class 155 (F),
used acc. to 130 (B),
coolant temperature 45 °C,
derating approx. 4 % 12)
C23
Temperature class 155 (F),
used acc. to 130 (B),
coolant temperature 50 °C,
derating approx. 8 % 12)
C24
Temperature class 155 (F),
used acc. to 130 (B),
coolant temperature 55 °C,
derating approx. 13 % 12)
C25
Temperature class 155 (F),
used acc. to 130 (B),
coolant temperature 60 °C,
derating approx. 18 %
C26
Increased air humidity/
temperature with 60 to 100 g
water per m3 of air
Temperature class 155 (F),
Y50 •
used acc. to 130 (B), with higher and
coolant temperature and/or site specified
altitude
output,
CT .. °C or
SA …. m
above
sea level
Colors and paint finish
Special finish in RAL 7030
stone gray
Unpainted
K23
(only cast-iron parts primed)
Unpainted, only primed
K24
Special finish sea air resistant
M94
10
Motor category
Motor
version
Motor
type
(alum.)
Zone 2 Ex nA II, 1LA7
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LA9
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LA9
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor
version
type
20
On
request
30
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
63
71
80
90
100
112
132
160
180
200
225
1LA5 % 1)
1LA7 $
1LA9 &
1LA9 (
Frame size
63
71
80
90
100
112
132
160
180
200
225
all
all
88.70 88.70 88.70 88.70 155.– 155.– 155.– 191.– –
–
–
all
all
all
all
all
all
all
all
–
–
61.60
O. R.
225.–
225.–
170.–
O. R.
266.–
266.–
170.–
O. R.
all
all
all
–
–
61.60
O. R.
37.–
37.–
61.60
O. R.
41.70
41.70
61.60
O. R.
107.–
107.–
115.–
O. R.
116.–
116.–
115.–
O. R.
127.–
127.–
115.–
O. R.
135.–
135.–
147.–
O. R.
191.–
191.–
147.–
O. R.
16.80 18.60 20.40 24.–
61.–
75.90 101.– 124.– 46.40 60.10 74.20
all
16.80 18.60 20.40 24.–
61.–
75.90 101.– 124.– 46.40 60.10 74.20
all
all
16.80 18.60 20.40 24.–




46.40 60.10 74.20
all
all
all
all
–
–
–
–
–
–
–
–
1320.– 1320.– 1320.–









all
all
153.– 153.– 153.– 153.– 153.– 153.– 153.– 232.– 312.– 385.– 465.–
all
all
42.70 42.70 42.70 42.70 49.70 49.70 66.10 66.10 84.30 84.30 95.80
all
all
42.70 42.70 42.70 42.70 49.70 49.70 66.10 66.10 84.30 84.30 95.80
all
all
57.40 67.50 76.50 90.10 111.– 135.– 172.– 214.– 276.– 336.– 497.–
all
all
57.40 67.50 76.50 90.10 111.– 135.– 172.– 214.– 276.– 336.– 497.–
all
all
279.– 279.– 289.– 289.– 297.– 334.– 361.– 480.– 596.– 623.– 840.–
all
all
82.80 97.10 110.– 130.– 160.– 193.– 250.– 307.– 397.– 488.– 718.–
all
all











all
all











all
all
all
all
21.50 21.50 21.50 28.70 28.70 28.70 45.70 45.70 85.80 85.80 85.80
675.– 675.– 675.– 675.– 711.– 711.– 760.– 760.– 834.– 834.– 834.–


For legends, see Page 4/63; for footnotes, see Page 4/64.
4/60
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Standard delivery times in working days:
10
20
Special versions
30
Supplements to article numbers and special versions
On
request
Additional
identification
code -Z
with order
code and
plain text
if required
Options
Aluminum series 1LA7, 1LA5, 1LA9
Motor category
Motor
version
Motor
type
(alum.)
Zone 2 Ex nA II, 1LA7
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LA9
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LA9
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor
version
type
1LA . . . . - . . . . . -Z
Colors and paint finish (continued)
Special finish in special
Y51 • and
all
all
RAL colors: For RAL colors, see special
"Special finish in special RAL
finish
colors" in Catalog D 81.1 · 2008 RAL ….
Part 0 "Introduction"
Special finish in other standard Y54 • and
all
all
RAL colors: RAL 1002, 1013,
special
1015, 1019, 2003, 2004, 3000, finish
3007, 5007, 5009, 5010, 5012, RAL ….
5015, 5017, 5018, 5019, 6011,
6019, 6021, 7000, 7001, 7004,
7011, 7016, 7022, 7031, 7032,
7033, 7035, 9001, 9002, 9005
(see Catalog D 81.1 · 2008
Part 0 "Introduction")
Special technology
Mounting of explosion-proof
H86
all
all
rotary pulse encoder for use in
Zones 2, 21, 22 13)
Mounting of explosion-proof
M97
all
all
separately driven fan II 3D for
use in Zone 22 14)
Mechanical design and degrees of protection
Drive-end seal for flangeK17
all
all
mounting motors, oil-tight to
0.1 bar. Not possible for type
of construction IM V3
only possible for %
With two additional eyebolts for K32
IM V1/IM V3
Low-noise version for 2-pole
K37
all
all
motors with clockwise direction
of rotation
Low-noise version for 2-pole
K38
all
all
motors with counter-clockwise
direction of rotation
K50
all
all
IP65 degree of protection 15)
IP56 degree of protection 16)
K52
all
all
Vibration-proof version
L03
all
all
Condensation drainage holes 17) L12
all
all
Rust-resistant screws
M27
all
all
(externally)
Mechanical protection for
M68
all
all
encoder 16)
Coolant temperature and site altitude
Coolant temperature -40 °C
D19
all
all
to +40 °C for explosion-proof
motors 17)
Designs in accordance with standards and specifications
Electrical according to
D30
all; for ( standard version
NEMA MG1-12
Ex certification for China
D32
only possible for & and (
(only valid for Zone 2)
China Energy Efficiency Label D34
only possible for & and (
Ex certification for Russia 22)
D35
all
all
NEMA Energy Efficient,
D42
only possible for (
North America version
according to NEMA MG1,
Table 12-11
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
63
71
80
90
100
112
132
160
180
200
225
1LA5 % 1)
1LA7 $
1LA9 &
1LA9 (
Frame size
63
71
80
90
100
112
132
160
180
200
225
572.– 572.– 685.– 685.– 775.– 775.– 775.– 818.– 818.– 818.– 818.–
63.–
63.–
63.–
63.–
106.– 106.– 139.– 139.– 194.– 243.– 361.–
–
–
–
–
9470.– 9470.– 9470.– 9470.– 9470.– 9470.– 9470.–
–
–
–
–
1970.– 2230.– 2510.– 2890.– 3140.– 3540.– 3940.–
44.90 47.10 49.70 53.20 59.30 64.80 79.–
115.– 150.– 185.– 245.–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
644.– 644.– 859.– 859.– 1370.–
–
–
–
–
–
–
644.– 644.– 859.– 859.– 1370.–
155.–
171.–
108.–
54.30
58.–
155.–
171.–
128.–
62.20
58.–
155.–
171.–
147.–
69.70
69.70
155.–
171.–
166.–
77.70
69.70
155.–
171.–
187.–
85.10
85.10
155.–
171.–
207.–
92.90
85.10
155.–
171.–
225.–
101.–
101.–
–
–
–
–
579.– 579.– 670.– 670.– 670.– 670.– 670.–
232.–
254.–
243.–
108.–
101.–
123.– 123.– 123.–
310.–
339.–
264.–
115.–
115.–
385.–
425.–
283.–
124.–
131.–
465.–
512.–
304.–
131.–
175.–
272.– 342.– 410.– 479.– 615.– 751.– 955.– 1360.– 1640.– 1910.– 2320.–
41.70 41.70 41.70 41.70 41.70 41.70 41.70 41.70 71.–
71.–
71.–
170.– 170.– 170.– 170.– 228.– 228.– 228.– 239.– –
–
–











163.– 163.– 163.– 163.– 219.– 219.– 219.– 230.– 230.– 335.– 335.–
O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. –
For legends, see Page 4/63; for footnotes, see Page 4/64.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/61
4
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Aluminum series 1LA7, 1LA5, 1LA9
Special versions
4
Additional
identification
code -Z
with order
code and
plain text
if required
1LA . . . . - . . . . . -Z
Bearings and lubrication
Measuring nipple for SPM shock G50
pulse measurement for bearing
inspection
Bearing design for increased
K20
cantilever forces
Regreasing device
K40
Located bearing DE
K94
Located bearing NDE
L04
Balance and vibration quantity
Vibration quantity level A
Vibration quantity level B
K02
Full-key balancing
L68
Balancing without key
M37
Shaft and rotor
Concentricity of shaft extension, K04
coaxiality and linear movement
in accordance with DIN 42955
Tolerance R for flange-mounting
motors 18)
Second standard shaft extension K16
Shaft extension with standard
K42
dimensions, without feather
keyway
Concentricity of shaft extension L39
in accordance with DIN 42955
Tolerance R
Standard shaft made of
M65
stainless steel
Non-standard cylindrical shaft Y58 • and
extension DE 19)
identification
code
Non-standard cylindrical shaft Y59 • and
19)
extension NDE
identification
code
Heating and ventilation
Fan cover for textile industry 20) H17
Metal external fan 21)
K35
Anti-condensation heating,
M15
Ex. 230 V
Anti-condensation heating,
M14
Ex. 115 V
Rating plate and extra rating plates
Second lubrication plate, loose B06
Second rating plate, loose
K31
Rating plate, stainless steel
M40
Extra rating plate or rating plate Y80 • and
with deviating rating plate data identification
code
Extra rating plate with
Y82 • and
identification code
identification
code
Additional information on rating Y84 • and
identification
plate and on package label
code
(max. 20 characters)
10
Motor category
Motor
version
Motor
type
(alum.)
Zone 2 Ex nA II, 1LA7
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LA9
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LA9
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor
version
type
20
On
request
30
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
63
71
80
90
100
112
132
160
180
200
225
1LA5 % 1)
1LA7 $
1LA9 &
1LA9 (
Frame size
63
71
80
90
100
112
132
160
180
200
225
all
all
–
–
–
–
265.– 296.– 327.– 360.– 388.– 420.– 451.–
all
all
–
–
–
–
104.– 121.– 136.– 181.– 228.– 269.– 302.–
all
all
all
all
all
all
–
41.–
37.–
–
–
41.– 41.–
39.30 41.–
–
327.– 335.– 345.– 374.– 394.– 443.– 492.–
43.50 75.– 88.80 109.– 150.– 315.– 437.– 615.–
43.50 49.– 51.60 54.80 



all
all
all
all
all
all
all
all



all
all
124.– 155.– 185.– 217.– 248.– 278.– 310.– 385.– 465.– 543.– 619.–
all
all
all
all
87.30 87.30 101.– 101.– 147.– 147.– 194.– 224.– 339.– 375.– 395.–
423.– 451.– 483.– 511.– 541.– 569.– 597.– 628.– 729.– 803.– 875.–
all
all
241.– 241.– 241.– 241.– 265.– 265.– 404.– 404.– 209.– 235.– 280.–








228.– 248.– 263.– 278.– 292.– 337.– 432.– 535.– 610.– 684.– 760.–
95.20 95.20 95.20 110.– 110.– 110.– 127.– 127.– 160.– 160.– 207.–
22.50 22.50 22.50 22.50 29.20 29.20 34.50 34.50 45.– 45.– 61.–
only possible for $ and % –
–
830.– 830.– 953.– 953.– 1100.– 1370.– 2440.– 2830.– 3060.–
all
all
407.– 434.– 464.– 491.– 520.– 547.– 574.– 604.– 701.– 772.– 841.–
all
all
407.– 434.– 464.– 491.– 520.– 547.– 574.– 604.– 701.– 772.– 841.–
all
all
all
all
all
all
–
–
124.– 201.– 326.– 465.– 590.– 697.– 697.– 976.– 976.–
155.– 155.– 155.– 155.– 194.– 232.– 269.– 310.– 348.– 385.– 425.–
–
–
O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.
all
all
–
–
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
all
all
all
all
only possible for & and (
all
all
–
21.70
41.80
55.20
–
21.70
41.80
64.90
–
21.70
41.80
73.60
–
21.70
41.80
86.60
21.70
21.70
41.80
107.–
21.70
21.70
41.80
130.–
21.70
21.70
41.80
165.–
21.70
21.70
41.80
206.–
69.70
69.70
–
265.–
69.70
69.70
–
323.–
69.70
69.70
–
478.–
all
all
42.70 42.70 42.70 42.70 42.70 42.70 42.70 42.70 71.30 71.30 71.30
all
all
42.70 42.70 42.70 42.70 42.70 42.70 42.70 42.70 71.30 71.30 71.30
For legends, see Page 4/63; for footnotes, see Page 4/64.
4/62
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Standard delivery times in working days:
10
20
Special versions
30
Supplements to article numbers and special versions
On
request
Additional
identification
code -Z
with order
code and
plain text
if required
Options
Aluminum series 1LA7, 1LA5, 1LA9
Motor category
Motor
version
Motor
type
(alum.)
Zone 2 Ex nA II, 1LA7
Zone 21/22 Ex t
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LA9
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LA9
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor
version
type
1LA . . . . - . . . . . -Z
Packaging, safety notes, documentation and test certificates
Printed Operating Instructions
all
(compact) for explosion-proof
motors enclosed in English and
German 23)
Acceptance test certificate 3.1 B02
all
in accordance with EN 10204 22)
Printed German/English
B23
all
Operating Instructions
(compact) enclosed
Type test with heat run for
F83
all
horizontal motors, with
acceptance
Wire-lattice pallet packaging
L99
all
Connected in star for dispatch M32
all
Connected in delta for dispatch M33
all
Printed Operating Instructions Y98 • and
all
(compact) for explosion-proof
identification
motors enclosed in other official code
EU languages 23)
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
63
71
80
90
100
112
132
160
180
200
225
1LA5 % 1)
1LA7 $
1LA9 &
1LA9 (
Frame size
63
71
80
90
100
112
132
160
180
200
225
all










all
29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50 29.50
all
66.10 66.10 66.10 66.10 66.10 66.10 66.10 66.10 66.10 66.10 66.10
all
4210.– 4210.– 4910.– 5620.– 6310.– 6730.– 7300.– 7720.– 8820.– 9850.– 10400.–
all
all
all
all

24.60
24.60
63.60


24.60
24.60
63.60

24.60
24.60
63.60

24.60
24.60
63.60

29.70
29.70
63.60

29.70
29.70
63.60

29.70
29.70
63.60

29.70
29.70
63.60

39.–
39.–
63.60
–
39.–
39.–
63.60
–
39.–
39.–
63.60
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


4
For footnotes, see Page 4/64.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/63
© Siemens AG 2015
SIMOTICS XP 1LA Explosion-Proof Motors
Supplements to article numbers and special versions
Options
Aluminum series 1LA7, 1LA5, 1LA9
4
1)
Zone 2 is not possible for motor series 1LA5. For Zone 2, instead of 1LA5
motors, 1LG4 motors are used.
2)
Anti-condensation heating not possible up to frame size 71 M.
3)
These motors do not have a rated voltage range stamped on the rating
plate.
4)
According to the standard, the motor and converter must be tested as a
unit. A "Manufacturer test certificate" is available for a defined spectrum of
Siemens motors (frame sizes 63 M to 315 L)/converters. Please inquire in
the case of a non-Siemens converter (additional charge).
5)
With this option, PTC thermistors for temperature class 130 (B) are
included. For compliance with the admissible temperature class 130 (B),
derating is necessary in the case of converter-fed operation in Zones 2, 21
and 22! The operating data for the MICROMASTER converter series from
Siemens are specified on the rating plate as standard. Derating information is available on request. For converter-fed operation, voltage
codes/order codes are only admissible with one voltage only.
6)
Please inquire regarding combination with order codes D19, K30 and
M97. Not possible in combination with order codes D32, K50 and K52.
7)
Zone 21 includes conductive and non-conductive dust.
8)
Order code J04 cannot be combined with order codes M34, M38, M72,
M73, M74 and M75, because they are already included as standard.
9)
Evaluation with appropriate tripping unit (see Catalog IC 10) is
recommended. A certified tripping unit is necessary for use in hazardous
areas. KTY 84-130 and Pt100 are not admissible as sole protection. For full
motor protection under mains-fed operation implemented only with PTC
thermistors, please inquire. Up to frame size 160 the combination A11 +
A25 is available on request.
10)
In combination with order code A60, for frame sizes 100 to 160 order
codes A11, A12, A22, A25, M14 and M15 are not possible. It can only be
supplied with a star or delta winding for direct switch-on (3 terminals).
11)
For 1LA7, 1LA5 and 1LA9 motors, additional charge only applies to Zone
22. Designs for Zones 2 and 21 already have a certified metal cable gland
in the standard version. For 1LA9 motors only possible for frame size 80
and above.
12)
There is no derating in combination with order codes L2A, L2C, L2Q, L2R,
L2S, L2T, L2U and L2V.
13)
Please inquire regarding combination with order codes C19, C26, L27 and
M97. Not possible in combination with order code K16. Combination with
a protective cover is not possible. In the case of a vertical mounting
position, therefore, a suitable cover must be implemented by the customer
to prevent small parts from falling into the fan cover (see the standard
IEC/EN 60079-0).
14)
Please inquire regarding combinations with order codes C19, C22, C23,
C24, C25, C26, C27, D19, H86, K30, K50 and K52. There is no derating in
combination with order codes 27, K16, K30, M72, M73, M34, M38, M74
and M75.
15)
Order code K50 (IP65 degree of protection) can only be ordered for
Zone 2. For Zone 21, IP65 degree of protection is standard. Not possible
for Zone 22, because only IP55 degree of protection is required.
4/64
Siemens D 81.1 P · 03/2015
Standard delivery times in working days:
10
20
30
On
request
16)
Order code K52 IP56 degree of protection can only be ordered for Zone 2.
Not admissible for Zone 21 (IP65 degree of protection) and Zone 22 (IP55
degree of protection).
17)
Supplied with the condensation drainage holes sealed at the drive end DE
and non-drive end NDE for IP55, IP56 and IP65 degrees of protection. If
condensation drainage holes are required in motors of the IM B6, IM B7 or
IM B8 type of construction (feet located on side or top), it is necessary to
relocate the bearing plates at the drive end (DE) and non-drive end (NDE)
so that the condensation drainage holes situated between the feet on
delivery are underneath.
18)
Can be combined with deep-groove bearings of series 60.., 62.. and 63…
Not possible in combination with parallel roller bearings (e.g. bearings for
increased cantilever forces, order code K20).
19)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Not valid for: Conical shafts, non-standard threaded journals, non-standard shaft tolerances, friction welded
journals, extremely "thin" shafts, special geometry dimensions (e.g. square
journals), hollow shafts. Valid for non-standard shaft extensions DE or
NDE. The feather keys are supplied in every case. For order codes Y58,
Y59 and K16, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension
For explanation of the order codes, see Catalog D 81.1 · 2008 Part 0
"Introduction".
20)
The special requirements of the textile industry regarding the sheet metal
cover open up the possibility that a finger may be inserted between the
cover and enclosure. The customer must implement appropriate
measures to ensure that the installed system is "finger-safe". For 1LA9
motors only possible for frame sizes 112 and 132.
21)
For 1LA5/6/7/9 motors and 1LG with metal external fan, converter-fed
operation is permitted. The metal external fan is standard for these motors
in the version for Zone 21/22. The metal external fan is not possible in
combination with the low-noise version – Order code K37 or K38.
22)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
23)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Standard delivery times in working days:
10
20
30
Supplements to article numbers and special versions
On
request
Options
Cast-iron series 1LA6, 1LG4, 1LG6
■ Selection and ordering data
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
1L . . . . . - . . . . . -Z
Design for Zones according to ATEX 1)
Ex nA II on VIK rating plate
C27
VIK version (comprises Zone 2 K30
for mains-fed operation, without Ex nA II marking on rating
plate)
Design for Zone 21, as well as M34
Zone 22 for conductive dust
(IP65) for mains-fed operation 6)
Design for Zone 22 for
M35
non-conductive dust (IP55),
for mains-fed operation
Design for Zone 21, as well as M38
Zone 22 for conductive dust
(IP65) for converter-fed
operation, with derating 2) 4) 6)
M39
Design for Zone 22 for
non-conductive dust (IP55),
for converter-fed operation,
with derating 2) 4)
Design for Zone 2 for mains-fed M72
operation Ex nA II T3 according
to IEC/EN 60079-15 2)
Design for Zone 2 for converter- M73
fed operation, with derating
Ex nA II T3 according to
IEC/EN 60079-15 2) 3) 4)
Design (IP55) for Zone 2 and M74
22, for non-conductive dust, for
mains-fed operation 5)
Design (IP55) for Zone 2 and M75
22, for non-conductive dust,
for converter-fed operation,
with derating 3) 4) 5)
Y68 • and
Alternative converter
(SIMOVERT MASTERDRIVES, converter
type .…
SINAMICS G110,
SINAMICS G120 (for 1LA
motors) or ET 200S FC
Motor protection
With PTC thermistors for alarm A10
for converter-fed operation in
Zones 2, 21, 22 8)
Motor protection with PTC
A11
thermistors with 3 embedded
temperature sensors for
tripping 8)
A12
Motor protection with PTC
thermistors with 6 embedded
temperature sensors for alarm
and tripping 8)
Motor temperature detection A23
with embedded temperature
sensor KTY 84-130 8)
Motor temperature detection A25
with embedded temperature
sensors 2 x KTY 84-130 8)
Installation of 3 Pt100
A60
resistance thermometers 8) 9)
Installation of 6 Pt100 resistance A61
thermometers in stator winding 8)
Motor category
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type 100
112
132
160
180
200
225
250
280
315
(castS/M
iron)
Zone 2 Ex nA II, 1LA6/ 1LA6 $
1LG4 %
Zone 21/22 Ex t 1LG4
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 &
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 (
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor Frame size
version
type 100
112
132
160
180
200
225
250
280
315
S/M
only possible for
& and (
only possible for
& and (
89.10
225.– 261.– 333.– 421.– 601.– 755.– 910.–
1160.– 1580.– 2100.– 2100.–
all
–
all
all
112.– 132.– 198.– 288.– 496.– 728.– 921.–
all
all
–
all
all
237.– 254.– 336.– 426.– 778.– 1010.– 1260.– 1450.– 1710.– 1860.– 1860.–
all
all
177.– 210.– 265.– 353.– 483.– 627.– 756.–
all
all
462.– 492.– 570.– 675.– 920.– 1190.– 1440.– 1750.– 2060.– 2460.– 2460.–
all
all
178.– 191.– 245.– 382.– 994.– 1260.– 1460.– 1650.– 1860.– 1990.– 1990.–
all
all
463.– 472.– 550.– 702.– 1420.– 1800.– 2130.– 2460.– 2800.– 3150.– 3150.–
all
all

all
all
all

–
–
1110.– 1290.– 1440.– 1440.–
909.– 1290.– 1730.– 2110.– 2640.– 3010.– 3010.–


1070.– 1290.– 1290.–


124.– 124.– 185.– 185.– 275.– 275.– 335.–
335.–
417.–
417.–
417.–
all
119.– 119.– 178.– 178.– 236.– 236.– 322.–
322.–
401.–
401.–
401.–
all
all
203.– 203.– 271.– 271.– 417.– 417.– 542.–
542.–
673.–
673.–
673.–
all
all
119.– 119.– 178.– 178.– 335.– 335.– 459.–
595.–
595.–
877.–
877.–
all
all
238.– 238.– 356.– 356.– 544.– 544.– 748.–
1010.– 1010.– 1490.– 1490.–
all
all
1500.– 1500.– 1500.– 1500.– 1500.– 1500.– 1500.– 1650.– 1650.– 1650.– 1650.–
all
all
–
–

914.–

–

628.– 1010.– 1390.– 1780.– 2200.– 2610.– 2610.–

–

–
107.–
all
–
–
107.–
315 L
41.70 41.70 41.70 41.70 71.30 71.30 71.30
–
89.10
315 L
2440.– 2440.– 2440.– 2440.– 2440.– 2440.– 2440.–
For legends, see Page 4/70; for footnotes, see Page 4/71.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/65
4
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA6, 1LG4, 1LG6
Special versions
4
Additional
identification
code -Z
with order
code and
plain text
if required
1L . . . . . - . . . . . -Z
Motor protection (continued)
Installation of 2 Pt100 screw-in A72
resistance thermometers in
basic circuit for rolling-contact
bearings 8) 10)
Installation of 2 Pt100 screw-in A78
resistance thermometers in
3-wire circuit for rolling-contact bearings 8)10)
Installation of 2 Pt100 double A80
screw-in resistance thermometers in 3-wire circuit for rollingcontact bearings 8)
Motor connection and connection box
J04
One metal cable gland,
certified according to ATEX 7)
K09
Connection box on RHS
K10
Connection box on LHS
K11
Connection box on top,
feet screwed on
Connection box in cast-iron
K15
version
One metal cable gland 11)
K54
Cable gland, max. configuration, K55
certified according to ATEX
Rotation of the connection box K83
through 90°, entry from DE
Rotation of the connection box K84
through 90°, entry from NDE
Rotation of the connection box K85
through 180°
L00
Next larger connection box
L13
External grounding
Auxiliary connection box
L97
1XB3 020
Saddle terminal for connection M47
without cable lug, accessories
pack, accessories pack
(6 items) 12)
Windings and insulation
C19
Increased air humidity/
temperature with 30 to 60 g
water per m3 of air
Temperature class 155 (F),
C22
used acc. to 130 (B),
coolant temperature 45 °C,
derating approx. 4 %
C23
Temperature class 155 (F),
used acc. to 130 (B),
coolant temperature 50 °C,
derating approx. 8 %
Temperature class 155 (F),
C24
used acc. to 130 (B),
coolant temperature 55 °C,
derating approx. 13 %
10
20
30
Motor category
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type 100
112
132
160
180
200
225
250
280
315
(castS/M
iron)
Zone 2 Ex nA II, 1LA6/ 1LA6 $
1LG4 %
Zone 21/22 Ex t 1LG4
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 &
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 (
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor Frame size
version
type 100
112
132
160
180
200
225
250
280
315
S/M
On
request
315 L
315 L
all
all
–
–
–
–
4430.– 4430.– 4430.– 4430.– 4430.– 4430.– 4430.–
all
all
–
–
–
–
4870.– 4870.– 4870.– 4870.– 4870.– 4870.– 4870.–
all
all
–
–
–
–
–
all
all
all
all
all
–
5840.– 5840.– 5840.–
155.– 155.– 155.– 191.– 191.– 212.– 212.–
291.–
291.–
291.–
all
all
all
126.– 135.– 147.– 215.– 382.– 450.– 532.–
126.– 135.– 147.– 215.– 382.– 450.– 532.–
–
–
–
–
382.– 450.– 532.–
790.–
790.–
790.–
888.–
888.–
888.–
1020.– 1020.–
1020.– 1020.–
1020.– 1020.–
all
all
–




all
all
all
all
115.– 115.– 115.– 147.– 147.– 170.– 170.–
O. R. O. R. O. R. O. R. O. R. O. R. O. R.
242.–
O. R.
242.–
O. R.
242.–
O. R.
242.–
O. R.
all
all
24.–
24.–
24.–
24.–
46.40 60.10 74.20
89.10
106.–
128.–
128.–
all
all
24.–
24.–
24.–
24.–
46.40 60.10 74.20
89.10
106.–
128.–
128.–
all
all
24.–
24.–
24.–
24.–
46.40 60.10 74.20
89.10
106.–
128.–
128.–
all
all
all
all
all
all
–
–
–
–
1320.– 1320.– 1710.– 1960.– 1960.– 2310.– 2310.–









–
–
–
–
228.– 228.– 552.–
552.–
552.–
552.–
552.–
all
all
–
–
–
–
–
543.–
543.–
641.–
641.–
all
all
153.– 153.– 153.– 232.– 1020.– 1300.– 1580.– 1930.– 2360.– 2890.– 2890.–
all
all
49.70 49.70 66.10 66.10 84.30 84.30 95.80
95.80
112.–
112.–
112.–
all
all
49.70 49.70 66.10 66.10 84.30 84.30 95.80
95.80
112.–
112.–
112.–
all
all
111.– 135.– 172.– 214.– 276.– 336.– 497.–
627.–
803.–
1040.– 1040.–
–
–
–
–
–
406.– 538.– 790.–

–

–
291.–
For legends, see Page 4/70; for footnotes, see Page 4/71.
4/66
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Standard delivery times in working days:
10
20
Special versions
30
Supplements to article numbers and special versions
On
request
Additional
identification
code -Z
with order
code and
plain text
if required
1L . . . . . - . . . . . -Z
Windings and insulation (continued)
C25
Temperature class 155 (F),
used acc. to 130 (B),
coolant temperature 60 °C,
derating approx. 18 %
C26
Increased air humidity/
temperature with 60 to 100 g
3
water per m of air
Temperature class 155 (F),
Y50 •
used acc. to 130 (B), with
and
higher coolant temperature
specified
and/or site altitude
output,
CT .. °C or
SA …. m
above
sea level
Colors and paint finish
Standard finish in RAL 7030
stone gray
Unpainted
K23
(only cast-iron parts primed)
Unpainted, only primed
K24
K26
Special finish in RAL 7030
13)
stone gray
Special paint for use offshore M91
Special finish sea air resistant M94
Y51 • and
Special finish in special
special
RAL colors: For RAL colors,
finish
see "Special finish in special
RAL ….
RAL colors" in Catalog
D 81.1 · 2008 Part 0
"Introduction"
Standard finish in other
Y53 • and
standard RAL colors:
standard
RAL 1002, 1013, 1015, 1019, finish
2003, 2004, 3000, 3007, 5007, RAL ….
5009, 5010, 5012, 5015, 5017,
5018, 5019, 6011, 6019, 6021,
7000, 7001, 7004, 7011, 7016,
7022, 7031, 7032, 7033, 7035,
9001, 9002, 9005
(see Catalog D 81.1 · 2008
Part 0 "Introduction")
Special finish in other standard Y54 • and
RAL colors: RAL 1002, 1013, special
1015, 1019, 2003, 2004, 3000, finish
3007, 5007, 5009, 5010, 5012, RAL ….
5015, 5017, 5018, 5019, 6011,
6019, 6021, 7000, 7001, 7004,
7011, 7016, 7022, 7031, 7032,
7033, 7035, 9001, 9002, 9005
(see Catalog D 81.1 · 2008
Part 0 "Introduction")
Special technology
H86
Mounting of explosion-proof
rotary pulse encoder for use
in Zones 2, 21, 22 14)
Mounting of explosion-proof
M95
separately driven fan Ex nA
for use in Zone 2 15)
Mounting of explosion-proof
M96
separately driven fan II 2D
for use in Zone 21 15)
Options
Cast-iron series 1LA6, 1LG4, 1LG6
Motor category
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type 100
112
132
160
180
200
225
250
280
315
(castS/M
iron)
Zone 2 Ex nA II, 1LA6/ 1LA6 $
1LG4 %
Zone 21/22 Ex t 1LG4
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 &
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 (
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor Frame size
version
type 100
112
132
160
180
200
225
250
280
315
S/M
all
111.– 135.– 172.– 214.– 276.– 336.– 497.–
all
all
297.– 334.– 361.– 480.– 4650.– 5080.– 5900.– 7780.– 8950.– 12800.– 12800.–
all
all
166.– 201.– 260.– 319.– 413.– 508.– 747.–
all
all
–
–
–
–


all
all






all
all
all
all
28.70 28.70 45.70 45.70 85.80 85.80 85.80




194.– 243.– 361.–
all
all
all
all
all
all
O. R. O. R. O. R. O. R. 2710.– 2860.– 3300.– 4300.– 5380.– 8310.– 8310.–
711.– 711.– 760.– 760.– 834.– 834.– 834.– 920.– 920.– 920.– 920.–
775.– 775.– 775.– 775.– 818.– 818.– 818.– 882.– 882.– 882.– 882.–
all
all
–
85.80 85.80 85.80
97.70
131.–
210.–
210.–
all
all
106.– 106.– 139.– 139.– 194.– 243.– 361.–
437.–
538.–
691.–
691.–
all
all
9470.– 9470.– 9470.– 9470.– 9470.– 9470.– 9470.– 9470.– 9470.– 9470.– 9470.–
all
all
–
–
–
–
–
–
3530.– 3790.– 4430.– 5040.– 5040.–
all
all
–
–
–
–
–
–
3790.– 4430.– 5170.– 5810.– 5810.–
–
–
803.–
315 L
all
–
627.–
315 L
1040.– 1040.–
939.–
1200.– 1560.– 1560.–










85.80
437.–
85.80
538.–
85.80
691.–
85.80
691.–
For legends, see Page 4/70; for footnotes, see Page 4/71.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/67
4
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
Options
Cast-iron series 1LA6, 1LG4, 1LG6
Special versions
4
Additional
identification
code -Z
with order
code and
plain text
if required
10
20
30
Motor category
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type 100
112
132
160
180
200
225
250
280
315
(castS/M
iron)
Zone 2 Ex nA II, 1LA6/ 1LA6 $
1LG4 %
Zone 21/22 Ex t 1LG4
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 &
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 (
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor Frame size
version
type 100
112
132
160
180
200
225
250
280
315
S/M
1L . . . . . - . . . . . -Z
Special technology (continued)
M97
all
all
Mounting of explosion-proof
separately driven fan II 3D for
use in Zone 22 15)
Mechanical design and degrees of protection
K17
all
all
Drive-end seal for flangemounting motors, oil-tight to
0.1 bar.
Not possible for type of
construction IM V3 16)
K37
all
all
Low-noise version for 2-pole
motors with clockwise direction
of rotation 17)
Low-noise version for 2-pole
K38
all
all
motors with counter-clockwise
17)
direction of rotation
IP65 degree of protection 18) K50
all
all
all
all
IP56 degree of protection 19) K52
L03
all
all
Vibration-proof version
L12
all
all
Condensation drainage
holes 20)
Rust-resistant screws
M27
all
all
(externally)
Mechanical protection for
M68
all
all
encoder 21)
Coolant temperature and site altitude
all
all
Coolant temperature -40 °C to D19
+40 °C for explosion-proof
motor 19)
Designs in accordance with standards and specifications
D30
all; for ( standard verElectrical according to
sion
NEMA MG1-12
Ex certification for China
D32
only possible for
(only valid for Zone 2)
& and (
only possible for
China Energy Efficiency Label D34
& and (
Ex certification for Russia 25) D35
all
all
only possible for (
NEMA Energy Efficient, North D42
America version according to
NEMA MG1, Table 12-11
Bearings and lubrication
G50
all
all
Measuring nipple for SPM
shock pulse measurement
for bearing inspection
Bearing design for increased K20
all
all
cantilever forces 23)
K36
Special bearing for DE and
NDE, bearing size 63 24)
K40
all
all
Regreasing device
Located bearing DE
K94
all
all
L04
all
all
Located bearing NDE
Insulated bearing cartridge 33) L27
Balance and vibration quantity
all
all
Vibration quantity level A
Vibration quantity level B 25)
K02
all
all
L68
all
all
Full-key balancing
M37
all
all
Balancing without key
On
request
315 L
315 L
1970.– 2230.– 2510.– 2890.– 3140.– 3540.– 3940.– 3940.– 5380.– 6040.– 6040.–
59.30 64.80 79.–
115.– 150.– 185.– 245.–
327.–
410.–
492.–
492.–
–
–
644.– 644.– 859.– 859.– 1370.– 1580.– 1880.– 2460.– 2460.–
–
–
644.– 644.– 859.– 859.– 1370.– 1580.– 1880.– 2460.– 2460.–
155.–
171.–
187.–
85.10
155.–
171.–
207.–
92.90
155.–
171.–
225.–
101.–
232.–
254.–
243.–
108.–
310.– 385.– 465.–
339.– 425.– 512.–
–
–
–
543.–
596.–
–
619.–
682.–
–
697.–
764.–
–
697.–
764.–
–





85.10 85.10 101.– 101.– 115.– 131.– 175.–
209.–
217.–
289.–
289.–
579.– 579.– 670.– 670.– 210.– 210.– 210.–
210.–
210.–
210.–
210.–


615.– 751.– 955.– 1360.– 1640.– 1910.– 2320.– 2870.– 3820.– 5050.– 5050.–
41.70 41.70 41.70 41.70 71.30 71.30 71.30
89.10
89.10
107.–
107.–
228.– 228.– 228.– 239.– 239.– 348.– 348.–
461.–
675.–
803.–
803.–





219.– 219.– 219.– 230.– 230.– 335.– 335.–
–
–
–
–
O. R. O. R. O. R.
443.–
O. R.
649.–
O. R.
772.–
O. R.
772.–
O. R.
265.– 296.– 327.– 360.– 388.– 420.– 451.–
483.–
513.–
544.–
544.–
104.– 121.– 136.– 181.– 287.– 332.– 374.–
433.–
485.–
541.–
541.–
–
–
–
–
1120.– 2010.– 2010.– 2010.–
327.–
75.–
45.40
–
335.–
88.80
47.90
–
345.–
109.–
50.80
–
374.– 394.– 443.– 492.–
150.– 315.– 437.– 615.–
591.–
790.–







–
–
–
1750.– 1870.– 1930.– 2030.– 2030.–













464.– 571.– 811.–
292.– 337.– 432.– 535.– 610.– 684.– 926.–
110.– 110.– 127.– 127.– 160.– 160.– 207.–
29.20 29.20 34.50 34.50 45.– 45.– 61.–



1020.– 1100.– 1100.–





1180.– 1370.– 1770.– 1770.–
207.– 207.– 207.– 207.–
61.–
74.20 86.10 86.10
For legends, see Page 4/70; for footnotes, see Page 4/71.
4/68
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Standard delivery times in working days:
10
20
Special versions
30
Supplements to article numbers and special versions
On
request
Additional
identification
code -Z
with order
code and
plain text
if required
Options
Cast-iron series 1LA6, 1LG4, 1LG6
Motor category
Motor
version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type 100
112
132
160
180
200
225
250
280
315
(castS/M
iron)
Zone 2 Ex nA II, 1LA6/ 1LA6 $
1LG4 %
Zone 21/22 Ex t 1LG4
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 &
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 (
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor Frame size
version
type 100
112
132
160
180
200
225
250
280
315
S/M
1L . . . . . - . . . . . -Z
Shaft and rotor
Concentricity of shaft extension, K04
all
all
coaxiality and linear movement
in accordance with DIN 42955
Tolerance R for flange-mounting
motors 26)
K16
all
all
Second standard shaft
extension 27)
Shaft extension with standard K42
all
all
dimensions, without feather
keyway
Concentricity of shaft extension L39
all
all
in accordance with DIN 42955
Tolerance R
Standard shaft made of
M65
all
all
stainless steel
Y58 • and
all
all
Non-standard cylindrical
identification
shaft extension DE 28)
code
Non-standard cylindrical
Y59 • and
all
all
28)
shaft extension NDE
identification
code
Heating and ventilation
Fan cover for textile industry 29) H17
all
all
K35
all
all
Metal external fan 30)
M14
all
all
Anti-condensation heating,
Ex. 115 V 31)
M15
all
all
Anti-condensation heating,
Ex. 230 V 31)
Separately driven fan with
Y81 • and
all
all
non-standard voltage and/or identification
frequency
code
Rating plate and extra rating plates
Second lubrication plate, loose B06
all
all
K31
all
all
Second rating plate, loose
M40
all
all
Rating plate, stainless steel
Y80 • and
all
all
Extra rating plate or rating
identification
plate with deviating rating
code
plate data
Extra rating plate with
Y82 •and
all
all
identification codes
identification
code
Additional information on rating Y84 • and
all
all
plate and on package label
identification
(max. 20 characters)
code
Packaging, safety notes, documentation and test certificates
all
all
Printed Operating Instructions
(compact) for explosion-proof
motors enclosed in English
and German 33)
Acceptance test certificate 3.1 B02
all
all
in accordance with
32)
EN 10204
Printed German/English
B23
all
all
Operating Instructions
enclosed
Type test with heat run for
F83
all
all
horizontal motors,
with acceptance
Wire-lattice pallet packaging L99
all
all
all
all
Connected in star for dispatch M32
315 L
315 L
248.– 278.– 310.– 385.– 465.– 543.– 619.–
697.–
776.–
851.–
851.–
147.– 147.– 194.– 224.– 339.– 375.– 395.–
412.–
487.–
535.–
535.–
541.– 569.– 597.– 628.– 729.– 803.– 875.–
948.–
1020.– 1090.– 1090.–
265.– 265.– 404.– 404.– 209.– 235.– 280.–
366.–
366.–
560.–
560.–
953.– 953.– 1100.– 1370.– 669.– 997.– 1370.– 1630.– 2720.– 3320.– 3320.–
520.– 547.– 574.– 604.– 701.– 772.– 841.–
912.–
982.–
1050.– 1050.–
520.– 547.– 574.– 604.– 701.– 772.– 841.–
912.–
982.–
1050.– 1050.–
326.– 465.– 590.– 697.– –
–
–
194.– 232.– 269.– 310.– 348.– 385.– 425.–
O. R. O. R. O. R. O. R. O. R. O. R. O. R.
–
465.–
O. R.
–
503.–
O. R.
–
543.–
O. R.
–
543.–
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
–
–
–
–
–
–
2360.– 2360.– 2360.– 2530.– 2530.–
21.70
21.70
–
107.–
21.70
21.70
–
130.–
21.70
21.70
–
165.–
21.70
21.70
–
206.–
69.70
69.70
51.10
265.–
69.70
69.70
51.10
323.–
69.70
69.70
69.–
478.–
69.70
69.70
69.–
603.–
69.70
69.70
69.–
772.–
69.70
69.70
69.–
1000.–
69.70
69.70
69.–
1000.–
42.70 42.70 42.70 42.70 71.30 71.30 71.30
89.10
89.10
112.–
112.–
42.70 42.70 42.70 42.70 71.30 71.30 71.30
89.10
89.10
112.–
112.–





29.50 29.50 29.50 29.50 29.50 29.50 29.50
29.50
29.50
29.50
29.50
66.10 66.10 66.10 66.10 66.10 66.10 66.10
66.10
66.10
66.10
66.10






6310.– 6730.– 7300.– 7720.– 8820.– 9850.– 10400.– 10400.– 11600.– 13200.– 13200.–




–
29.70 29.70 29.70 29.70 39.–
–
39.–
–
39.–
–
48.40
–
48.40
–
48.40
–
48.40
For legends, see Page 4/70; for footnotes, see Page 4/71.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/69
4
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Supplements to article numbers and special versions
Options
Cast-iron series 1LA6, 1LG4, 1LG6
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
Motor category
Motor
version
Standard delivery times in working days:
10
20
30
Additional charges plus MS EUR, standard delivery time (colored area)
Motor Motor type – Frame size
type 100
112
132
160
180
200
225
250
280
315
(castS/M
iron)
Zone 2 Ex nA II, 1LA6/ 1LA6 $
1LG4 %
Zone 21/22 Ex t 1LG4
IE1 Standard
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 &
Zone 21/22 Ex t
IE2 High
Efficiency
Zone 2 Ex nA II, 1LG6
1LG6 (
Zone 21/22 Ex t
NEMA Energy
Efficient
Motor
Motor Frame size
version
type 100
112
132
160
180
200
225
250
280
315
1L . . . . . - . . . . . -Z
S/M
Packaging, safety notes, documentation and test certificates (continued)
M33
all
all
29.70 29.70 29.70 29.70 39.– 39.– 



Connected in delta for
dispatch
Printed Operating Instructions Y98 • and
all
all
63.60 63.60 63.60 63.60 63.60 63.60 63.60 63.60 63.60 63.60
(compact) for explosion-proof identification
motors enclosed in other
code
official EU languages 33)
On
request
315 L
315 L

63.60
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


4
For footnotes, see Page 4/71.
4/70
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS XP 1LA/1LG Explosion-Proof Motors
Standard delivery times in working days:
10
20
30
Supplements to article numbers and special versions
On
request
1)
Only permitted for use in accordance with temperature class 130 (B).
2)
These motors do not have a rated voltage range stamped on the rating
plate.
3)
According to the standard, the motor and converter must be tested as a
unit. A "Manufacturer test certificate" is available for a defined spectrum of
Siemens motors (frame sizes 63 M to 315 L)/converters. Please inquire in
the case of a non-Siemens converter (additional charge).
4)
With this option, PTC thermistors for temperature class 130 (B) are
included. For compliance with the admissible temperature class 130 (B),
derating is necessary in the case of converter-fed operation in Zones 2, 21
and 22! The operating data for the MICROMASTER converter series from
Siemens are specified on the rating plate as standard. Derating information is available on request. For converter-fed operation, voltage codes/
order codes are only admissible with one voltage only.
Options
Cast-iron series 1LA6, 1LG4, 1LG6
20)
For 1LA6 motors: Supplied with the condensation drainage holes sealed
at the drive end DE and non-drive end NDE for IP55, IP56 and IP65
degrees of protection. If condensation drainage holes are required in
motors of the IM B6, IM B7 or IM B8 type of construction (feet located on
side or top), it is necessary to relocate the bearing plates at the drive end
(DE) and non-drive end (NDE) so that the condensation drainage holes
situated between the feet on delivery are underneath.
21)
Not necessary when a rotary pulse encoder is combined with a separately
driven fan, because in this case the rotary pulse encoder is installed under
the fan cover
22)
Not possible in combination with order code L03.
23)
Not possible for 2-pole 1LG4 and 1LG6 motors, frame size 315 L in
vertical types of construction; bearings for increased cantilever forces at
vibration quantity level B are available on request for 1LG4 motors. Not
possible for 1LG4 and 1LG6 motors in the combination "Concentricity of
the shaft extension, coaxiality and linear movement in accordance with
DIN 42955 Tolerance R for flange-mounting motors" – Order code K04.
24)
With 4-pole to 8-pole motors of frame size 280 and above, standard
version.
5)
Please inquire regarding combination with order codes D19, K30, M95,
M96 and M97. Not possible in combination with order codes D32, K50
and K52.
6)
Zone 21 includes conductive and non-conductive dust.
7)
Order code J04 cannot be combined with order codes M34, M38, M72,
M73, M74 and M75, because they are already included as standard.
25)
8)
Evaluation with appropriate tripping unit (see Catalog IC 10) is
recommended. A certified tripping unit is necessary for use in hazardous
areas. KTY 84-130 and Pt100 are not admissible as sole protection. For full
motor protection under mains-fed operation implemented only with PTC
thermistors, please inquire. Up to frame size 160 the combination A11 +
A25 is available on request.
Not possible in combination with parallel roller bearings (e.g. bearings for
increased cantilever forces, order code K20).
26)
Can be combined with deep-groove bearings of series 60.., 62.. and 63…
Not possible in combination with parallel roller bearings (e.g. bearings for
increased cantilever forces, order code K20).
27)
Possible for motors of frame size 315 and above in vertical types of
construction or 2-pole for version with second shaft extension on request.
Version with protective cover not possible.
28)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Not valid for: Conical shafts, non-standard threaded journals, non-standard shaft tolerances, friction welded
journals, extremely "thin" shafts, special geometry dimensions (e.g. square
journals), hollow shafts. Valid for non-standard shaft extensions DE or
NDE. The feather keys are supplied in every case.
For order codes Y58, Y59 and K16, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension
For explanation of the order codes, see Catalog D 81.1 · 2008 Part 0
"Introduction".
29)
The special requirements of the textile industry regarding the sheet metal
cover open up the possibility that a finger may be inserted between the
cover and enclosure. The customer must implement appropriate
measures to ensure that the installed system is "finger-safe".
30)
For 1LA5/6/7/9 motors and 1LG with metal external fan, converter-fed
operation is permitted. The metal external fan is standard for these motors
in the version for Zone 21/22. The metal external fan is not possible in
combination with the low-noise version – Order code K37 or K38.
31)
For 1LG4/1LG6 motors in Zones 2, 21 and 22, order codes K45 and K46
for an anti-condensation heater are also possible.
32)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
33)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300.
9)
In combination with order code A60, for frame sizes 100 to 160 order
codes A11, A12, A22, A25, M14 and M15 are not possible. It can only be
supplied with a star or delta winding for direct switch-on (3 terminals).
10)
Order codes A72 or A78 are not possible in combination with order
code L27.
11)
For 1LA6, 1LG4 and 1LG6 motors, additional charge only applies to
Zone 22. Designs for Zones 2 and 21 already have a certified metal cable
gland in the standard version. Standard with designs for Zone 2, 21 and
VIK.
12)
Standard with designs for Zone 2, 21 and VIK.
13)
For frame sizes 100 to 160, do not specify an order code. Order code is
only necessary for frame sizes 180 to 315.
14)
Please inquire regarding combination with order codes C19, C26, L27,
M95, M96 and M97. Not possible in combination with order code K16.
Combination with a protective cover is not possible. In the case of a
vertical mounting position, therefore, a suitable cover must be implemented by the customer to prevent small parts from falling into the fan
cover (see the standard IEC/EN 60079-0).
15)
Please inquire regarding combinations with order codes C19, C22, C23,
C24, C25, C26, C27, D19, H86, K30, K50 and K52. Not possible in
combination with order code K16. The type of protection of the separately
driven fan must be selected to comply with that of the motor.
16)
Not possible for motor series 1LG4 for 2-pole motors.
17)
For 1LG4 motors, in the low-noise version, a second shaft extension is not
possible. Not necessary for 1LG6 motors because these motors are
already noise optimized.
18)
Order code K50 (IP65 degree of protection) can only be ordered for
Zone 2. For Zone 21, IP65 degree of protection is standard. Not possible
for Zone 22, because only IP55 degree of protection is required.
19)
Order code K52 IP56 degree of protection can only be ordered for Zone 2.
Not admissible for Zone 21 (IP65 degree of protection) and Zone 22 (IP55
degree of protection).
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
4/71
4
© Siemens AG 2015
SIMOTICS XP Explosion-Proof Motors
Supplements to article numbers and special versions
Standard delivery times in working days:
10
Notes
20
30
On
request
4
4/72
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP
Application-specific Motors
5
Orientation – In preparation
Loher motors – In preparation
Pump motors – In preparation
Fan motors – In preparation
Compressor motors – In preparation
5/2
5/2
5/2
5/3
5/4
5/4
5/4
5/5
5/6
5/6
5/8
5/9
5/9
5/10
5/11
5/11
5/12
5/13
5/13
5/15
5/17
5/17
5/17
5/18
5/19
5/20
5/21
5/22
5/23
5/29
Smoke-extraction motors
Motors with High Efficiency IE2
Self-ventilated motors with SIMOTICS DP –
Aluminum series 1PC1300
Self-ventilated motors with SIMOTICS DP –
Cast-iron series 1PC1301
Supplements to article numbers and
special versions
Voltages
• Aluminum series 1PC1300
• Cast-iron series 1PC1301
Types of construction
• Aluminum series 1PC1300
• Cast-iron series 1PC1301
Motor protection
• Aluminum series 1PC1300
• Cast-iron series 1PC1301
Connection box position
• Aluminum series 1PC1300
• Cast-iron series 1PC1301
Options
• Aluminum series 1PC1300
• Cast-iron series 1PC1301
Marine motors
Special versions
Standard Motors – Aluminum series
1LA7/5/9, 1LP7/5, 1PP7/5
Standard Motors – Cast-iron series
1LA6, 1LG4/6, 1LP4, 1PP4
Explosion-proof motors –
Aluminum series 1MA7
Explosion-proof motors –
Aluminum series 1LA7/5/9
Explosion-proof motors –
Cast-iron series 1MA6
Explosion-proof motors –
Cast-iron series 1LA6, 1LG4/6
Non-Standard Motors – Cast-iron series
1LA8, 1LL8, 1PQ8
Ordering example
Crane motors – In preparation
Roller table motors – In preparation
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
30
■ Overview
Category
Motors with High Efficiency IE2
Series version
Aluminum series 1PC1300
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class H (180)
Number of poles
2, 4, 6
Frame sizes (FS)
80 M ... 160 L
Rated output at 50 Hz
0.37 ... 18.5 kW
Synchronous speed
1000 ... 3000 rpm
Rated torque at 50 Hz
2.6 ... 108 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 5/4, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS

2-pole: 3000 rpm at 50 Hz
0.75
IE2
80 M
1.1
IE2
80 M
1.5
IE2
90 S
2.2
IE2
90 L
3
IE2
100 L
4
IE2
112 M
5.5
IE2
132 S
7.5
IE2
132 M
11
IE2
160 M
15
IE2
160 L
18.5
IE2
160 L
4-pole: 1500 rpm at 50 Hz
0.55
IE2
80 M
0.75
IE2
80 M
1.1
IE2
90 S
1.5
IE2
90 L
2.2
IE2
100 L
3
IE2
100 L
4
IE2
112 M
5.5
IE2
132 S
7.5
IE2
132 M
11
IE2
160 M
15
IE2
160 L
6-pole: 1000 rpm at 50 Hz
0.37
IE2
80 M
0.55
IE2
80 M
0.75
IE2
90 S
1.1
IE2
90 L
1.5
IE2
100 L
2.2
IE2
112 M
3
IE2
132 S
4
IE2
132 M
5.5
IE2
132 M
7.5
IE2
160 M
11
IE2
160 L
5
5/2
Siemens D 81.1 P · 03/2015
New
EUR
1PC1300-0DA2.-....
1PC1300-0DA3.-....
1PC1300-0EA0.-....
1PC1300-0EA4.-....
1PC1300-1AA4.-....
1PC1300-1BA2.-....
1PC1300-1CA0.-....
1PC1300-1CA1.-....
1PC1300-1DA2.-....
1PC1300-1DA3.-....
1PC1300-1DA4.-....
1170.–
1250.–
1360.–
1580.–
1720.–
2010.–
2490.–
2940.–
4060.–
4980.–
5690.–
1PC1300-0DB2.-....
1PC1300-0DB3.-....
1PC1300-0EB0.-....
1PC1300-0EB4.-....
1PC1300-1AB4.-....
1PC1300-1AB5.-....
1PC1300-1BB2.-....
1PC1300-1CB0.-....
1PC1300-1CB2.-....
1PC1300-1DB2.-....
1PC1300-1DB4.-....
1150.–
1200.–
1290.–
1420.–
1580.–
1770.–
2080.–
2530.–
3010.–
4090.–
5080.–
1PC1300-0DC2.-....
1PC1300-0DC3.-....
1PC1300-0EC0.-....
1PC1300-0EC4.-....
1PC1300-1AC4.-....
1PC1300-1BC2.-....
1PC1300-1CC0.-....
1PC1300-1CC2.-....
1PC1300-1CC3.-....
1PC1300-1DC2.-....
1PC1300-1DC4.-....
1170.–
1260.–
1360.–
1520.–
1660.–
1930.–
2360.–
2790.–
3340.–
4310.–
5460.–
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Overview of selection and ordering data
with base prices and standard delivery times
30
■ Overview (continued)
Category
Motors with High Efficiency IE2
Series version
Cast-iron series 1PC1301
Cooling
Self-ventilated (IC 411)
Degree of protection
IP55, optionally IP56 or IP65
Insulation
Thermal class H (200)
Number of poles
2, 4, 6
Frame sizes (FS)
180 M ... 315 L
Rated output at 50 Hz
15 ... 200 kW
Synchronous speed
1000 ... 3000 rpm
Rated torque at 50 Hz
71 ... 1282 Nm
Efficiency
High Efficiency IE2
Metal factor for metal surcharges (MS) N - W - - - - Price group (PG)
3Z1
Range of motors with Article No., delivery time and base price plus MS for type of construction IM B3 and connection box on top
(for article number supplements and special versions see from Page 5/4, for delivery times refer to colored background following the respective price)
Prated, IE
Frame
Article No.
Base
class
size
price
50 Hz
kW
FS

2-pole: 3000 rpm at 50 Hz
22
IE2
180 M
30
IE2
200 L
37
IE2
200 L
45
IE2
225 M
55
IE2
250 M
75
IE2
280 S
90
IE2
280 M
110
IE2
315 S
132
IE2
315 M
160
IE2
315 L
200
IE2
315 L
4-pole: 1500 rpm at 50 Hz
18.5
IE2
180 M
22
IE2
180 L
30
IE2
200 L
37
IE2
225 S
45
IE2
225 M
55
IE2
250 M
75
IE2
280 S
90
IE2
280 M
110
IE2
315 S
132
IE2
315 M
160
IE2
315 L
200
IE2
315 L
6-pole: 1000 rpm at 50 Hz
15
IE2
180 L
18.5
IE2
200 L
22
IE2
200 L
30
IE2
225 M
37
IE2
250 M
45
IE2
280 S
55
IE2
280 M
75
IE2
315 S
90
IE2
315 M
110
IE2
315 L
132
IE2
315 L
160
IE2
315 L
Recommended retail prices plus metal surcharges (MS)
New
EUR
1PC1301-1EA2.-....
1PC1301-2AA4.-....
1PC1301-2AA5.-....
1PC1301-2BA2.-....
1PC1301-2CA2.-....
1PC1301-2DA0.-....
1PC1301-2DA2.-....
1PC1301-3AA0.-....
1PC1301-3AA2.-....
1PC1301-3AA4.-....
1PC1301-3AA5.-....
6720.–
8700.–
10800.–
12200.–
15800.–
20200.–
24100.–
28700.–
33200.–
40300.–
51700.–
1PC1301-1EB2.-....
1PC1301-1EB4.-....
1PC1301-2AB5.-....
1PC1301-2BB0.-....
1PC1301-2BB2.-....
1PC1301-2CB2.-....
1PC1301-2DB0.-....
1PC1301-2DB2.-....
1PC1301-3AB0.-....
1PC1301-3AB2.-....
1PC1301-3AB4.-....
1PC1301-3AB5.-....
6030.–
6830.–
8910.–
10200.–
12000.–
15800.–
19100.–
22800.–
26400.–
33000.–
40400.–
50400.–
1PC1301-1EC4.-....
1PC1301-2AC4.-....
1PC1301-2AC5.-....
1PC1301-2BC2.-....
1PC1301-2CC2.-....
1PC1301-2DC0.-....
1PC1301-2DC2.-....
1PC1301-3AC0.-....
1PC1301-3AC2.-....
1PC1301-3AC4.-....
1PC1301-3AC5.-....
1PC1301-3AC6.-....
7050.–
8540.–
9810.–
12300.–
15900.–
19700.–
23200.–
28300.–
32300.–
38500.–
44100.–
54500.–
5
Siemens D 81.1 P · 03/2015
5/3
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Supplements to article numbers and special versions
Voltages – Aluminum series 1PC1300
20
On
request
■ Selection and ordering data
Voltages
Voltage
code
12th and
13th
position
of the
Article No.
Additional
Motor category
identification
code with
Motor version
Motor type
order code
(alum.)
and plain text
if required
IE2 High Efficiency 1PC1300
Motor version
1PC1300 - . . . . ■ - ■ . . .
Voltage at 50 Hz and 60 Hz
50 Hz 230 VΔ/400 VY
2 2
50 Hz 400 VΔ/690 VY
3 4
50 Hz 400 VY
0 2
50 Hz 500 VY
2 7
50 Hz 500 VΔ
4 0
Non-standard voltage and/or frequencies
Non-standard winding 1)
9 0
Motor type
Order code
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
1PC1300
Frame size
80
90
100
112
132
160


















all
all
all
all
all
all
all
all
all
all






–
–




M1Y • and
all
identification
code
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
–
–
–
–
–
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


5
1)
Special voltages or 60 Hz on request.
5/4
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
20
On
request
Supplements to article numbers and special versions
Voltages – Cast-iron series 1PC1301
■ Selection and ordering data
Voltages
Voltage
code
12th and
13th
position
of the
Article No.
Additional
Motor category
identification
code with
Motor version
Motor type
order code
(cast-iron)
and plain text
if required
IE2 High Efficiency 1PC1301
Motor version
1PC1301 - . . . . ■ - ■ . . .
Voltage at 50 Hz and 60 Hz
50 Hz 230 VΔ/400 VY
2 2
50 Hz 400 VΔ/690VY
3 4
50 Hz 500 VY
2 7
50 Hz 500 VΔ
4 0
Non-standard voltage and/or frequencies
Non-standard winding 1)
9 0
Motor type
Order code
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
180
200
225
250
280
315
1PC1301
Frame size
180
200
225
250
280
315
all
all
all
all
all
all
all
all
























M1Y • and
all
identification
code
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
–
–
–
–
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


5
1)
Special voltages or 60 Hz on request.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
5/5
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Supplements to article numbers and special versions
Types of construction – Aluminum series 1PC1300
20
On
request
■ Selection and ordering data
Types of construction
Type
of construction
code
14th
position
of the
Article
No.
Additional
identification code
with order
code and
plain text
if required
Motor category
Motor version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
IE2 High Efficiency 1PC1300
1PC1300
Motor version
5
Motor type Frame size
80
90
1PC1300 - . . . . . - . ■ . .
Without flange
IM B3
A
Order code
–
all
all

IM B6
T
–
all
all
IM B7
U
–
all
IM B8
V
–
IM V6
D
IM V5
without
protective
cover
100
112
132
160











all






all
all






–
all
all






C
–
all
all






IM B30
Z
P3A
all
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
IM V30
Z
P3C
all
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
IM V31
Z
P3D
all
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
With flange
acc. to DIN EN 50347
acc. to DIN 42 948
F
–
all
all
FF165
A 200
52.10
FF165
A 200
62.50
FF215
A 250
77.40
FF215
A 250
96.10
FF265
A 300
125.–
FF300
A 350
162.–
IM B5
IM V1
without
protective
cover
G
–
all
all
52.10
62.50
77.40
96.10
125.–
162.–
IM V3
H
–
all
all
52.10
62.50
77.40
96.10
125.–
162.–
IM B35
J
–
all
all
69.90
79.90
96.10
126.–
158.–
228.–
For legends, see Page 5/7.
5/6
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Supplements to article numbers and special versions
Types of construction – Aluminum series 1PC1300
20
Types of construction
Type
of construction
code
14th
position
of the
Article
No.
Additional
identification code
with order
code and
plain text
if required
Motor category
Motor version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type Motor type – Frame size
(alum.)
80
90
100
112
132
160
IE2 High Efficiency 1PC1300
1PC1300
Motor version
1PC1300 - . . . . . - . ■ . .
Order code
With standard flange
acc. to DIN EN 50347
acc. to DIN 42 948
IM B14
K
–
all
Motor type Frame size
80
FT100
C 120
all
52.10
90
FT115
C 140
62.50
100
FT130
C 160
77.40
112
FT130
C 160
96.10
132
FT165
C 200
125.–
160
FT165
C 200
162.–
IM V19
L
–
all
all
52.10
62.50
77.40
96.10
125.–
162.–
IM V18
without
protective
cover
M
–
all
all
52.10
62.50
77.40
96.10
125.–
162.–
IM B34
N
–
all
all
69.90
79.90
96.10
126.–
158.–
228.–
Standard version
O. R. Possible on request

5
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
5/7
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Supplements to article numbers and special versions
Types of construction – Cast-iron series 1PC1301
20
On
request
■ Selection and ordering data
Types of construction
Type
of construction
code
14th
position
of the
Article
No.
Additional
identification code
with order
code and
plain text
if required
Motor category
Motor version
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type
(cast-iron) 180
200
225
250
280
315
315 L
315 L
S/M
2-pole
4-pole,
6-pole,
8-pole
IE2 High Efficiency 1PC1301
1PC1301
Motor version
5
Motor type Frame size
180
200
225
250
280
315
S/M
315 L
2-pole
315 L
4-pole,
6-pole,
8-pole
1PC1301 - . . . . . - . ■ . .
Without flange
IM B3
A
Order code
–
all
all








IM B6
T
–
all
all








IM B7
U
–
all
all








IM B8
V
–
all
all








IM V6
D
–
all
all






437.–

IM V5
without
protective
cover
C
–
all
all






437.–

IM B30
Z
P3A
all
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
IM V30
Z
P3C
all
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
IM V31
Z
P3D
all
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
With flange
acc. to DIN EN 50347
acc. to DIN 42 948
F
–
all
all
FF215
A 250
256.–
FF215
A 250
311.–
FF265
A 300
402.–
FF300
A 350
483.–
FF300
A 350
703.–
FF350 FF400
A 400 A 450
1000.– –
FF500
A 550
–
IM B5
IM V1
without
protective
cover
G
–
all
all
255.–
309.–
404.–
492.–
706.–
1010.– 1430.–
1010.–
IM V3
H
–
all
all
256.–
311.–
402.–
483.–
703.–
1000.– –
–
IM B35
J
–
all
all
346.–
455.–
672.–
915.–
1190.– 1570.– 1570.–
1570.–

Standard version
O. R. Possible on request
5/8
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Supplements to article numbers and special versions
Motor protection – Aluminum series 1PC1300
10
■ Selection and ordering data
Motor protection
Motor
protection
code
15th
position
of the
Article No.
Additional
identification code
with order
code and
plain text
if required
Motor category
Motor version
IE2 High Efficiency 1PC1300
Motor version
1PC1300 - . . . . . - . . ■ .
Motor protection (winding protection)
Without motor protection
A
Motor protection with PTC
B
thermistors with 3 embedded
temperature sensors for tripping
Motor protection with PTC
C
thermistors with 6 embedded
temperature sensors for alarm
and tripping
Motor temperature detection with F
embedded temperature sensor
KTY 84-130

Motor type
(alum.)
Motor type
Order code
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
1PC1300
Frame size
80
90
100
112
132
160
–
–
all
all
all
all






150.–
150.–
150.–
150.–
225.–
225.–
–
all
all
296.–
296.–
296.–
296.–
399.–
399.–
–
all
all
231.–
231.–
231.–
231.–
307.–
307.–
Standard version
5
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
5/9
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Supplements to article numbers and special versions
Motor protection – Cast-iron series 1PC1301
20
■ Selection and ordering data
Motor protection
Motor
protection
code
15th
position
of the
Article No.
Additional
identification code
with order
code and
plain text
if required
Motor category
Motor version

Motor type
(cast-iron)
IE2 High Efficiency 1PC1301
Motor version
1PC1301 - . . . . . - . . ■ .
Motor protection (winding protection)
Without motor protection
A
Motor protection with PTC
B
thermistors with 3 embedded
temperature sensors for tripping
Motor protection with PTC
C
thermistors with 6 embedded
temperature sensors for alarm
and tripping
Motor temperature detection with F
embedded temperature sensor
KTY 84-130
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type
Order code
180
200
1PC1301
225
250
280
315
Frame size
180
200
225
250
280
315
–
–
all
all
all
all






324.–
324.–
361.–
423.–
423.–
423.–
–
all
all
591.–
591.–
626.–
749.–
749.–
749.–
–
all
all
500.–
500.–
657.–
657.–
657.–
1070.–
Standard version
5
5/10
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Supplements to article numbers and special versions
Connection box position – Aluminum series 1PC1300
10
■ Selection and ordering data
Connection box position
4
6
5
7
Connection box
position
code
16th
position
of the
Article No.
Additional
identification code
with order
code and
plain text
if required
■
Order code
4
5
6
7
–
–
–
–
Motor category
Motor version
IE2 High Efficiency 1PC1300
Motor version
1PC1300 - . . . . . - . . .
Connection box position 1)
Connection box on top
Connection box on RHS
Connection box on LHS
Connection box bottom 2)

–
Motor type
(alum.)
all
all
all
all
Motor type
all
all
all
all
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
1PC1300
Frame size
80
90
100
112
132
160






34.20
34.20
–
38.60
38.60
–
99.50
99.50
99.50
108.–
108.–
108.–
117.–
117.–
117.–
125.–
125.–
125.–
Standard version
Not possible
5
1)
This means the position of the base of connection box at the housing.
2)
For motors without feet.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
5/11
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Supplements to article numbers and special versions
Connection box position – Cast-iron series 1PC1301
20
On
request
■ Selection and ordering data
Connection box position
4
6
5
7
1PC1301 - . . . . . - . . .
Connection box position 1)
Connection box on top
Connection box on RHS
Connection box on LHS
Connection box bottom 2)
Connection
box
position
code
16th
position
of the
Article
No.
AddiMotor category
tional
identifi- Motor version
Motor type
cation
(cast-iron)
code
with
IE2 High Efficiency 1PC1301
order
code
and
plain
text if
required
Order
code
Motor version
■
4
5
6
7
–
–
–
–
all
all
all
all
Motor type
all
all
all
all
Additional charges plus MS EUR, standard delivery time
(colored area)
180
200
1PC1301
225
250
280
315
Frame size
180
200
225
250
280
315






353.–
353.–
O. R.
416.–
416.–
O. R.
492.–
492.–
O. R.
731.–
731.–
O. R.
821.–
821.–
O. R.
946.–
946.–
O. R.
Standard version
O. R. Possible on request

5
1)
This means the position of the base of connection box at the housing.
2)
For motors without feet.
5/12
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
30
On
request
Supplements to article numbers and special versions
Options – Aluminum series 1PC1300
■ Selection and ordering data
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
Motor category
Motor version
IE2 High Efficiency 1PC1300
Motor version
1PC1300 - . . . . . - . . . . -Z Order code
Motor protection (bearing protection)
Measuring nipple for SPM shock pulse Q01
measurement for bearing inspection
Prepared for mounting a
Q05
SIPLUS CMS 1000 vibration sensor
Motor connection and connection box
External grounding
H04
Connection box on NDE 1)
H08
Connection box on position 180°;
R12
connection from left
Connection box on position 0°;
R13
connection from right
One metal cable gland
Windings and insulation
Increased air humidity/temperature
N20
with 30 to 60 g water per m3 of air
Colors and paint finish
Standard finish in RAL 7030 stone gray
Unpainted (only cast-iron parts primed) S00
Unpainted, only primed
S01
Special finish sea air resistant
S03
Special finish in special RAL colors:
Y51 • and
For RAL colors, see "Special finish in
special finish
special RAL colors"
RAL….
(see Catalog D 81.1 Part 1)
Y54 • and
Special finish in other standard
special finish
RAL colors: RAL 1002, 1013, 1015,
RAL….
1019, 2003, 2004, 3000, 3007, 5007,
5009, 5010, 5012, 5015, 5017, 5018,
5019, 6011, 6019, 6021, 7000, 7001,
7004, 7011, 7016, 7022, 7031, 7032,
7033, 7035, 9001, 9002, 9005
(see Catalog D 81.1 Part 1)
Mechanical design and degrees of protection
Protective cover 2)
H00
Screwed-on (instead of cast) feet
H01
Condensation drainage holes
Rust-resistant screws (externally)
H07
Degree of protection IP65
H20
Degree of protection IP56
H22
Drive-end seal for flange-mounting
H23
motors, oil-tight to 0.1 bar
Next larger standard flange
P01
Coolant temperature and site altitude
Coolant temperature –30 to +40 °C
D04
Bearings and lubrication
Bearing design for increased cantilever L22
forces
Regreasing device
L23
Bearing insulation DE
Bearing insulation NDE
Balance and vibration quantity
Vibration quantity level A
Vibration quantity level B
L00
Half-key balancing (standard)
Balancing without key,
L01
key is supplied
Full-key balancing
L02
Motor type
(alum.)
Motor type
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
1PC1300
Frame size
80
90
100
112
132
160
all
all
–
–
245.–
274.–
302.–
333.–
all
all
–
–
359.–
359.–
359.–
359.–
all
all
all
all
all
all
22.80
80.–
22.80
92.–
27.50
114.–
27.50
140.–
27.50
181.–
27.50
246.–






all
all






all
all






all
all
–
–
141.–
141.–
141.–
214.–
all
all
all
all
all
all
all
all
all
all












19.90
O. R.
659.–
26.50
O. R.
659.–
26.50
658.–
745.–
26.50
658.–
745.–
42.20
703.–
745.–
42.20
703.–
787.–
all
all
58.30
58.30
98.30
98.30
129.–
129.–
all
all
all
all
all
all
all
all
all
all
all
all
all
all
54.–
86.40

–
143.–
158.–
46.–
54.–
86.40

–
143.–
158.–
49.20
78.40
99.50

78.70
143.–
158.–
54.80
78.40
108.–

78.70
143.–
158.–
59.90
137.–
117.–

93.10
143.–
158.–
73.10
137.–
125.–

93.10
214.–
235.–
107.–
all
all
–
–
O. R.
O. R.
O. R.
–
all
all
54.–
54.–
67.40
67.40
80.90
80.90
all
all
–
–
95.90
112.–
126.–
167.–
all
all
all
all
all
all
–
O. R.
O. R.
–
O. R.
O. R.
302.–
O. R.
O. R.
310.–
O. R.
O. R.
319.–
O. R.
O. R.
346.–
O. R.
O. R.
all
all
all
all
all
all
all
all






243.–
257.–
270.–
312.–
399.–
494.–






20.80
20.80
27.–
27.–
31.90
31.90
all
all
91.50
106.–
106.–
106.–
122.–
122.–
5
For legends and footnotes, see Page 5/14.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
5/13
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Supplements to article numbers and special versions
Options – Aluminum series 1PC1300
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
Motor category
Motor version
Non-standard shaft extension NDE 3)
Special shaft steel
Heating and ventilation
Without external fan and without
fan cover
Rating plate and extra rating plates
Extra rating plate for voltage tolerance
Motor type
(alum.)
IE2 High Efficiency 1PC1300
Motor version
1PC1300 - . . . . . - . . . . -Z
Shaft and rotor
Shaft extension with standard
dimensions without feather keyway
Second standard shaft extension
Concentricity of shaft extension in
accordance with DIN 42955
Tolerance R
Concentricity of shaft extension,
coaxiality and linear movement in
accordance with DIN 42955
Tolerance R for flange-mounting motors
Non-standard shaft extension, DE 3)
30
Motor type
Order code
On
request
Additional charges plus MS EUR, standard delivery time
(colored area)
Motor type – Frame size
80
90
100
112
132
160
1PC1300
Frame size
80
90
100
112
132
160
L04
all
all
–
–
500.–
526.–
552.–
581.–
L05
L07
all
all
all
all
93.10
232.–
93.10
232.–
136.–
255.–
136.–
255.–
180.–
388.–
207.–
388.–
L08
all
all
171.–
201.–
229.–
257.–
287.–
356.–
Y58 • and
identification
code
Y59 • and
identification
code
all
all
446.–
472.–
500.–
526.–
552.–
581.–
all
all
446.–
472.–
500.–
526.–
552.–
581.–
all
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
F90
all
all






B07
all
all
39.50
39.50
39.50
39.50
39.50
39.50
all
all
20.10
70.80
20.10
70.80
20.10
103.–
20.10
125.–
20.10
159.–
20.10
198.–
all
39.50
39.50
39.50
39.50
39.50
39.50
all
39.50
39.50
39.50
39.50
39.50
39.50
all
27.30
27.30
27.30
27.30
27.30
27.30
all
65.–
65.–
65.–
65.–
65.–
65.–
all
3700.–
3700.–
3700.–
3700.–
3700.–
3700.–
all
4720.–
5400.–
6070.–
6470.–
7020.–
7420.–
4)
M10
all
Y80 • and
all
identification
code
Y82 • and
all
Extra rating plate with identification
identification
codes
code
Additional information on rating plate
Y84 • and
all
and on package label
identification
(max. 20 characters)
code
Packaging, safety notes, documentation and test certificates
Acceptance test certificate 3.1 in
B02
all
accordance with EN 10204 EN 10204 5)
Printed German/English Operating
B04
all
Instructions enclosed 6)
Standard test (routine test)
B65
all
with acceptance
Type test with heat run for horizontal
B83
all
motors, without acceptance
Second rating plate, loose
Extra rating plate or rating plate with
deviating rating plate data
5
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


1)
Attention: Dimensions "C" and "CA" are not standard dimensions
according to EN 50347. Note the dimension specification according to
the dimension sheet generator!
2)
Order code H00 indicates mechanical protection.
3)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. Valid for
non-standard shaft extensions DE or NDE. The feather keys are supplied
in every case.
For order codes Y58 and L05, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension.
For an explanation of the order codes, see Catalog D 81.1 · 2014 Part 1
"Introduction".
5/14
Siemens D 81.1 P · 03/2015
4)
Can be ordered for 230 VΔ/400 VY or 400 VΔ/690 VY
(voltage code "22" or "34")
5)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
6)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
40
On
request
Supplements to article numbers and special versions
Options – Cast-iron series 1PC1301
■ Selection and ordering data
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
Motor category
Motor version
Motor type
(cast-iron)
IE2 High Efficiency 1PC1301
Motor version
1PC1301 - . . . . . - . . . . -Z Order code
Motor protection (bearing protection)
Measuring nipple for SPM shock pulse Q01
measurement for bearing inspection
Prepared for mounting a
Q05
SIPLUS CMS 1000 vibration sensor
Motor connection and connection box
External grounding
Connection box on NDE 1)
H08
R12
Connection box on position 180°;
connection from left
Connection box on position 0°;
R13
connection from right
One metal cable gland
Windings and insulation
N20
Increased air humidity/temperature
with 30 to 60 g water per m3 of air
Colors and paint finish
Standard finish in RAL 7030 stone gray
Unpainted (only cast-iron parts primed) S00
Unpainted, only primed
S01
S03
Special finish sea air resistant
S05
Inner varnishing
S10
Special finish in RAL 7030 stone gray
Y51 •
Special finish in special RAL colors:
and
For RAL colors, see "Special finish in
special
special RAL colors"
finish
(see Catalog D 81.1 Part 1)
RAL….
Y53 •
Standard finish in other standard
and
RAL colors: RAL 1002, 1013, 1015,
standard
1019, 2003, 2004, 3000, 3007, 5007,
finish
5009, 5010, 5012, 5015, 5017, 5018,
RAL….
5019, 6011, 6019, 6021, 7000, 7001,
7004, 7011, 7016, 7022, 7031, 7032,
7033, 7035, 9001, 9002, 9005
(see Catalog D 81.1 Part 1)
Y54 •
Special finish in other standard
and
RAL colors: RAL 1002, 1013, 1015,
special
1019, 2003, 2004, 3000, 3007, 5007,
finish
5009, 5010, 5012, 5015, 5017, 5018,
RAL….
5019, 6011, 6019, 6021, 7000, 7001,
7004, 7011, 7016, 7022, 7031, 7032,
7033, 7035, 9001, 9002, 9005
(see Catalog D 81.1 Part 1)
Mechanical design and degrees of protection
H01
Screwed-on (instead of cast) feet
Condensation drainage holes
Rust-resistant screws (externally)
H07
H20
Degree of protection IP65
H22
Degree of protection IP56
H23
Drive-end seal for flange-mounting
motors, oil-tight to 0.1 bar
Coolant temperature and site altitude
D04
Coolant temperature –30 to +40 °C
Bearings and lubrication
Bearing design for increased cantilever L22
forces
L23
Regreasing device
Bearing insulation DE
Bearing insulation NDE
Additional charges plus MS EUR, standard delivery time (colored
area)
180
200
1PC1301
225
250
280
315
180
200
225
250
280
315
Motor type
all
all
388.–
420.–
451.–
483.–
513.–
544.–
all
all
359.–
388.–
417.–
446.–
474.–
503.–
all
all
all
all
all
all






920.–
950.–
1000.–
1050.–
1100.–
1150.–






all
all






all
all






all
all
944.–
1200.–
1460.–
1790.–
2180.–
2670.–
all
all
all
all
all
all
all
all
all
all
all
all
all
all












79.30
718.–
60.–
180.–
787.–
79.30
739.–
65.–
225.–
787.–
79.30
771.–
85.–
334.–
787.–
79.30
798.–
105.–
404.–
848.–
79.30
825.–
120.–
497.–
848.–
79.30
851.–
130.–
638.–
848.–
all
all
79.30
79.30
79.30
90.30
121.–
194.–
all
all
180.–
225.–
334.–
404.–
497.–
638.–
all
all
all
all
all
all
all
all
all
all
all
all
353.–
416.–
492.–
731.–
821.–
946.–






107.–
287.–
313.–
138.–
121.–
356.–
393.–
171.–
162.–
430.–
473.–
227.–
193.–
502.–
551.–
302.–
201.–
572.–
631.–
379.–
267.–
644.–
707.–
455.–
all
all
108.–
135.–
135.–
1260.–
1800.–
2320.–
all
all
265.–
307.–
346.–
400.–
448.–
500.–
all
all
all
all
all
all
364.–
–
–
410.–
–
–
455.–
O. R.
O. R.
546.–
O. R.
O. R.


O. R.
O. R.
O. R.
O. R.
For legends and footnotes, see Page 5/16.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
5/15
5
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Smoke-extraction motors
Standard delivery times in working days:
Supplements to article numbers and special versions
Options – Cast-iron series 1PC1301
Special versions
Additional
identification
code -Z
with order
code and
plain text
if required
Motor category
Motor version
Non-standard cylindrical shaft
extension NDE 3)
Special shaft steel
Heating and ventilation
Without external fan and without
fan cover
Rating plate and extra rating plates
Extra rating plate for voltage tolerance 4)
Extra rating plate or rating plate with
deviating rating plate data
5
On
request
Additional charges plus MS EUR, standard delivery time (colored
area)
Motor type
(cast-iron)
IE2 High Efficiency 1PC1301
Motor version
1PC1301 - . . . . . - . . . . -Z
Balance and vibration quantity
Vibration quantity level A
Vibration quantity level B 2)
Half-key balancing (standard)
Balancing without key,
key is supplied
Full-key balancing
Shaft and rotor
Shaft extension with standard
dimensions without feather keyway
Second standard shaft extension
Concentricity of shaft extension in
accordance with DIN 42955
Tolerance R
Concentricity of shaft extension,
coaxiality and linear movement in
accordance with DIN 42955
Tolerance R for flange-mounting motors
Non-standard cylindrical shaft
extension DE 3)
40
180
200
1PC1301
225
250
280
315
180
200
225
250
280
315
Motor type
Order code
all
all
all
all






775.–
780.–
856.–
1090.–
1270.–
1630.–






L01
all
all
all
all
41.60
41.60
56.40
56.40
68.60
79.60
L02
all
all
154.–
154.–
199.–
199.–
199.–
199.–
L04
all
all
674.–
742.–
809.–
877.–
944.–
1010.–
L05
L07
all
all
all
all
313.–
201.–
347.–
226.–
365.–
269.–
381.–
352.–
450.–
352.–
494.–
538.–
L08
all
all
430.–
502.–
572.–
644.–
717.–
787.–
Y58 • and
identification
code
Y59 • and
identification
code
all
all
674.–
742.–
809.–
877.–
944.–
1010.–
all
all
674.–
742.–
809.–
877.–
944.–
1010.–
all
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
all
all






all
all
66.–
255.–
66.–
311.–
66.–
460.–
82.40
580.–
82.40
742.–
104.–
964.–
all
66.–
66.–
66.–
82.40
82.40
104.–
all
66.–
66.–
66.–
82.40
82.40
104.–
all
27.30
27.30
27.30
27.30
27.30
27.30
all
65.–
65.–
65.–
65.–
65.–
65.–
all
3700.–
3700.–
3700.–
3700.–
3700.–
3700.–
all
9400.–
9400.–
12400.–
12400.–
13600.–
13600.–
L00
F90
B07
all
Y80 • and
all
identification
code
Extra rating plate with identification
Y82 • and
all
codes
identification
code
Additional information on rating plate
Y84 • and
all
and on package label
identification
(max. 20 characters)
code
Packaging, safety notes, documentation and test certificates
B02
all
Acceptance test certificate 3.1 in
accordance with EN 10204 5)
B04
all
Printed German/English Operating
Instructions enclosed 6)
Standard test (routine test) with
B65
all
acceptance
B83
all
Type test with heat run for horizontal
motors, with acceptance
Standard version
Without additional charge
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible


1)
Attention: Dimensions "C" and "CA" are not standard dimensions
according to EN 50347. Note the dimension specification according to
the dimension sheet generator!
2)
For 2 pole motors on request (concerns frame sizes 225 to 315).
3)
When motors are ordered that have a longer or shorter shaft extension
than normal, the required position and length of the feather keyway must
be specified in a sketch. It must be ensured that only feather keys in
accordance with DIN 6885, Form A are permitted to be used. The feather
keyway is positioned centrally on the shaft extension. The length is defined
by the manufacturer normatively. Valid for non-standard shaft extensions
DE or NDE. The feather keys are supplied in every case.
For order codes Y58, Y59 and L05, the following applies:
– Dimensions D and DA ≤ inner diameter of roller bearing
(see dimension tables under "Dimensions")
– Dimensions E and EA ≤ 2 × length E (normal) of the shaft extension.
For an explanation of the order codes, see Catalog D 81.1 · 2014 Part 1
"Introduction".
5/16
Siemens D 81.1 P · 03/2015
4)
Can be ordered for 230 VΔ/400 VY or 400 VΔ/690 VY
(voltage code "22" or "34")
5)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
6)
The Operating Instructions (compact) are available in PDF format for all
official EU languages at
http://support.automation.siemens.com/WW/view/en/10803948/133300.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
10
On
request
Special versions
Standard Motors – Aluminum series 1LA7/5/9, 1LP7/5, 1PP7/5
■ Selection and ordering data
Options
Special versions
Additional
identification code
-Z
with order
code and
plain text
if required
Motor category
Motor
Motor
version
type
(alum.)
IE2/NEMA
1LA9
Energy
Efficient
IE1
1LA7/
1LA5
1LA9
1PP7/
1PP5
1LP7/
1LP5
Pole1LA7/
changing
1LA5
For con1LA7/
verter fed
1LA5
operation
only
Motor
Motor
version
type
1PP5 . . . - . . . . . -Z Order
1L . . . . . - . . . . . -Z code
Marine version – Basic version 1)
Without type test certificate
E00
all
according to ABS 50 °C/CCS
45 °C/RINA 45 °C, temperature
class 155 (F) used according
to 155 (F) (if acceptance test
certificate 3.1 according to
EN 10204 is required, this
must be ordered with order
code B02) 2)
With type test certificate
E11
all
according to GL
(Germanischer Lloyd),
Germany, CT 45 °C,
temperature class 155 (F),
used according to 155 (F) 3)
With type test certificate
E21
all
according to LR (Lloyds
Register), Great Britain,
CT 45 °C, temperature class
155 (F) used according to
155 (F) 3)
With type test certificate
E31
all
according to BV (Bureau
Veritas), France, CT 45 °C,
Temperature class 155 (F)
used according to 155 (F) 3)
With type test certificate
E46
all
according to RS (Russian
Maritime Register of
Shipping), Russia, CT 45 °C,
Temperature class 155 (F)
used according to 155 (F) 3)
E51
all
With type test certificate
according to DNV
(Det Norske Veritas), Norway,
CT 45 °C, temperature class
155 (F) used according to
155 (F) 3)
Marine version – Acceptance/certification
Individual acceptance by
E10
all
marine classification society
Type test with heat run
F83
all
for horizontal motors,
4)
with acceptance
Type test with heat run
plain text all
for vertical motors,
if required
4)
with acceptance
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
63
71
80
90
100
112
132
160
180
200
225
1LA9
1LA7
1LA5
1LA9 with increased output
1PP7
1PP5
1LP7
1LP5
1LA7
1LA5
1LA7
1LA5
Frame size
63
71
80
90
100
112
132
160
180
200
225
all
69.90
69.90
69.90
69.90
75.60
75.60
75.60
75.60
108.–
108.–
108.–
all
112.–
112.–
112.–
112.–
151.–
151.–
151.–
162.–
162.–
231.–
231.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
162.–
232.–
232.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
162.–
232.–
232.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
162.–
232.–
232.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
162.–
232.–
232.–
all
6930.– 6930.– 6930.– 6930.– 6930.– 6930.– 6930.– 6930.– 7810.– 7810.– 7810.–
all
4210.– 4210.– 4910.– 5620.– 6310.– 6730.– 7300.– 7720.– 8820.– 9850.– 10400.–
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R. Possible on request
1)
Motor for use in shipping for higher ambient temperature and/or used as
155 (F) according to 130 (B), order with details in plain text. The order codes
for the basic marine version (E00, E11, E21, E31, E51) cannot be combined
with each other. For the 1LA9 motor series with increased output, for order
codes E11, E31 and E51 derating of 4 % is required and for order codes
E00 and E21 derating of 8 % is required.
Recommended retail prices plus metal surcharges (MS)
2)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
3)
For 1LP7 and 1LP5 motors, certification is possible on request in
accordance with the classification societies GL, LR, BV, RS and DNV.
4)
Option or plain text data only necessary for one motor when ordering
several motors of the same type.
Siemens D 81.1 P · 03/2015
5/17
5
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
Special versions
Standard Motors – Cast-iron series 1LA6, 1LG4/6, 1LP4, 1PP4
Special versions
5
Additional
identification code
-Z
with order
code and
plain text
if required
Motor category
Motor
Motor
version
type
(castiron)
IE2/NEMA
1LG6
Energy
Efficient
IE3
1LG6
IE1
1LA6/
1LG4
1PP4
1LP4
Pole1LG4
changing
For con1LG6
verter fed
operation
only
Motor
Motor
version
type
1PP4 . . . - . . . . . -Z Order
1L . . . . . - . . . . . -Z code
Marine version – Basic version 2)
Without type test certificate
E00
all
according to ABS 50 °C/CCS
45 °C/RINA 45 °C, temperature
class 155 (F) used according
to 155 (F) (if acceptance test
certificate 3.1 according to
EN 10204 is required, this
must be ordered with order
code B02) 3)
E11
all
With type test certificate
according to GL
(Germanischer Lloyd),
Germany, CT 45 °C,
temperature class 155 (F),
used according to 155 (F) 4)
With type test certificate
E21
all
according to LR (Lloyds
Register), Great Britain,
CT 45 °C, temperature class
155 (F) used according to
155 (F) 4)
E31
all
With type test certificate
according to BV (Bureau
Veritas), France, CT 45 °C,
Temperature class 155 (F)
used according to 155 (F) 4)
E46
all
With type test certificate
according to RS (Russian
Maritime Register of
Shipping), Russia, CT 45 °C,
Temperature class 155 (F)
used according to 155 (F) 4)
E51
all
With type test certificate
according to DNV
(Det Norske Veritas), Norway,
CT 45 °C, temperature class
155 (F) used according to
155 (F) 4)
Marine version – Acceptance/certification
Individual acceptance by
E10
all
marine classification society plain text all
if required
Type test with heat run for
F83
all
horizontal motors,
5)
with acceptance
Type test with heat run for
plain text all
vertical motors,
if required
5)
with acceptance
10
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
280
On
request
315
1LG6 1)
1LG6 1)
1LA6
1LG4
1PP4
1LP4
1LG4
1LG6
Frame size
100
112
132
160
180
200
225
250
280
315
all
75.60
75.60
75.60
75.60
108.–
108.–
108.–
111.–
111.–
111.–
all
151.–
151.–
151.–
162.–
162.–
231.–
231.–
305.–
448.–
801.–
all
152.–
152.–
152.–
162.–
162.–
232.–
232.–
305.–
449.–
803.–
all
152.–
152.–
152.–
162.–
162.–
232.–
232.–
305.–
449.–
803.–
all
146.–
146.–
146.–
156.–
156.–
223.–
223.–
293.–
432.–
772.–
all
152.–
152.–
152.–
162.–
162.–
232.–
232.–
305.–
449.–
803.–
all
all
–
O. R.
–
O. R.
–
O. R.
–
O. R.
7810.–
–
7810.–
–
7810.–
–
8820.–
–
8820.–
–
8820.–
–
all
6310.–
6730.–
7300.–
7720.–
8820.–
9850.–
10400.– 10400.– 11600.– 13200.–
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R. Possible on request
–
Not possible
1)
2)
Order identically priced predecessor type for 2-pole motors 1LG6...2AA../
1LG6...2AB.. or 4-pole motors 1LG6...4AA.. to be ordered using options
for marine certificates. For increased output of motors 1LG6 ■■-■M■ ..
from 160 kW to 315 kW, a marine version is not possible.
3)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
4)
For 1LP4 motors, certification is possible on request in accordance with
the classification societies GL, LR, BV, RS and DNV.
Motor for use in shipping for higher ambient temperature and/or used as
155 (F) according to 130 (B), order with details in plain text. The order
codes for the basic marine version (E00, E11, E21, E31, E51) cannot be
combined with each other.
5)
Option or plain text data only necessary for one motor when ordering
several motors of the same type.
5/18
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
20
On
request
Special versions
Special versions
Explosion-proof motors – Aluminum series 1MA7
Additional
identification code
-Z
with order
code and
plain text
if required
Motor category
Motor
Motor
version
type
(alum.)
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
80
90
100
112
132
160
1MA7
63
1MA7
71
Zone 1
Ex e II
Motor
Order
version
1MA7 . . . - . . . . . -Z code
Marine version – Basic version 1)
Without type test certificate
E00
all
according to ABS 50 °C/CCS
45 °C/RINA 45 °C, temperature
class 155 (F) used according
to 155 (F) (if acceptance test
certificate 3.1 according to
EN 10204 is required, this
must be ordered with order
code B02) 2)
With type test certificate
E11
all
according to GL
(Germanischer Lloyd),
Germany, CT 45 °C,
temperature class 155 (F),
used according to 155 (F)
With type test certificate
E21
all
according to LR (Lloyds
Register), Great Britain,
CT 45 °C, temperature class
155 (F) used acc. to 155 (F)
With type test certificate
E31
all
according to BV (Bureau
Veritas), France, CT 45 °C,
Temperature class 155 (F)
used acc. to 155 (F)
E46
all
With type test certificate
according to RS (Russian
Maritime Register of
Shipping), Russia, CT 45 °C,
Temperature class 155 (F)
used acc. to 155 (F)
E51
all
With type test certificate
according to DNV
(Det Norske Veritas), Norway,
CT 45 °C, temperature class
155 (F) used acc. to 155 (F)
Marine version – Acceptance/certification
Individual acceptance by
plain text all
marine classification society if required
Type test with heat run for
plain text all
horizontal motors,
if required
3)
with acceptance
Type test with heat run for
plain text all
vertical motors,
if required
3)
with acceptance
Motor
type
Frame size
63
71
80
90
100
112
132
160
all
67.30
67.30
67.30
67.30
72.80
72.80
72.80
72.80
all
108.–
108.–
108.–
108.–
146.–
146.–
146.–
156.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R. Possible on request
1)
Motor for use in shipping for higher ambient temperature and/or used as
155 (F) according to 130 (B), order with details in plain text. The order codes
for the basic marine version (E00, E11, E21, E31, E51) cannot be combined
with each other. For the 1LA9 motor series with increased output, for order
codes E11, E31 and E51 derating of 4 % is required and for order codes
E00 and E21 derating of 8 % is required.
Recommended retail prices plus metal surcharges (MS)
2)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
3)
Option or plain text data only necessary for one motor when ordering
several motors of the same type.
Siemens D 81.1 P · 03/2015
5/19
5
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
Special versions
Explosion-proof motors – Aluminum series 1LA7/5/9
Special versions
5
Additional
identification code
-Z
with order
code and
plain text
if required
Motor category
Motor
Motor
version
type
(alum.)
Zone 2
1LA7
Ex nA II,
Zone 21/22
Ex t IE1
Zone 2
1LA9
Ex nA II,
Zone 21/22
Ex t IE2/
NEMA
Energy
Efficient
Motor
Motor
version
type
Order
1LA . . . . - . . . . . -Z code
Marine version – Basic version 3)
Without type test certificate
E00
all
according to ABS 50 °C/CCS
45 °C/RINA 45 °C, temperature
class 155 (F) used according
to 155 (F) (if acceptance test
certificate 3.1 according to
EN 10204 is required, this
must be ordered with order
code B02) 4)
With type test certificate
E11
all
according to GL
(Germanischer Lloyd),
Germany, CT 45 °C,
temperature class 155 (F),
used according to 155 (F)
With type test certificate
E21
all
according to LR (Lloyds
Register), Great Britain,
CT 45 °C, temperature class
155 (F) used acc. to 155 (F)
With type test certificate
E31
all
according to BV (Bureau
Veritas), France, CT 45 °C,
Temperature class 155 (F)
used acc. to 155 (F)
E46
all
With type test certificate
according to RS (Russian
Maritime Register of
Shipping), Russia, CT 45 °C,
Temperature class 155 (F)
used acc. to 155 (F)
E51
all
With type test certificate
according to DNV
(Det Norske Veritas), Norway,
CT 45 °C, temperature class
155 (F) used acc. to 155 (F)
Marine version – Acceptance/certification
Individual acceptance by
E10
all
marine classification society
Type test with heat run for
F83
all
horizontal motors,
with acceptance 5)
Type test with heat run for
plain text all
vertical motors,
if required
with acceptance 5)
10
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
63
71
80
90
100
112
132
160
180
1LA7
1LA5
On
request
200
225
1)
1LA9 2)
Frame size
63
71
80
90
100
112
132
160
180
200
225
all
67.30
67.30
67.30
67.30
72.80
72.80
72.80
72.80
104.–
104.–
104.–
all
108.–
108.–
108.–
108.–
146.–
146.–
146.–
156.–
156.–
223.–
223.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
162.–
232.–
232.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
162.–
232.–
232.–
all
108.–
108.–
108.–
108.–
146.–
146.–
146.–
156.–
156.–
223.–
223.–
all
112.–
112.–
112.–
112.–
152.–
152.–
152.–
162.–
162.–
232.–
232.–
all
6930.– 6930.– 6930.– 6930.– 6930.– 6930.– 6930.– 6930.– 7810.– 7810.– 7810.–
all
4210.– 4210.– 4910.– 5620.– 6310.– 6730.– 7300.– 7720.– 8820.– 9850.– 10400.–
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R. Possible on request
1)
Zone 2 Ex nA II is not possible for 1LA5 motors; for Zone 2 Ex nA II, 1LG4
motors are available.
4)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
2)
Zone 2 Ex nA II is not possible for 1LA9 motors in frame sizes 180 and
200.
5)
Option or plain text data only necessary for one motor when ordering
several motors of the same type.
3)
Motor for use in shipping for higher ambient temperature and/or used as
155 (F) according to 130 (B), order with details in plain text. The order codes
for the basic marine version (E00, E11, E21, E31, E51) cannot be combined
with each other. For the 1LA9 motor series with increased output, for order
codes E11, E31 and E51 derating of 4 % is required and for order codes
E00 and E21 derating of 8 % is required.
5/20
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
20
On
request
Special versions
Special versions
Explosion-proof motors – Cast-iron series 1MA6
Additional
identification code
-Z
with order
code and
plain text
if required
Motor category
Motor
Motor
version
type
(castiron)
Zone 1
1MA6
Ex e II
Motor
Order
version
1M . . . . . - . . . . . -Z code
Marine version – Basic version 1)
Without type test certificate
E00
all
according to ABS 50 °C/CCS
45 °C/RINA 45 °C, temperature
class 155 (F) used according
to 155 (F) (if acceptance test
certificate 3.1 according to
EN 10204 is required, this
must be ordered with order
code B02) 2)
With type test certificate
E11
all
according to GL
(Germanischer Lloyd),
Germany, CT 45 °C,
temperature class 155 (F),
used according to 155 (F)
With type test certificate
E21
all
according to LR (Lloyds
Register), Great Britain,
CT 45 °C, temperature class
155 (F) used acc. to 155 (F)
With type test certificate
E31
all
according to BV (Bureau
Veritas), France, CT 45 °C,
Temperature class 155 (F)
used acc. to 155 (F)
With type test certificate
E46 New! all
according to RS (Russian
Maritime Register of
Shipping), Russia, CT 45 °C,
temperature class 155 (F)
used according to 155 (F)
With type test certificate
E51
all
according to DNV
(Det Norske Veritas), Norway,
CT 45 °C, temperature class
155 (F), used according to
155 (F)
Marine version – Acceptance/certification
Individual acceptance by
plain text all
marine classification society if required
Type test with heat run for
plain text all
horizontal motors,
if required
3)
with acceptance
Type test with heat run for
plain text all
vertical motors,
if required
3)
with acceptance
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
1MA6
Motor
type
100
112
132
160
180
200
all
72.80
72.80
72.80
72.80
104.–
104.–
all
146.–
146.–
146.–
156.–
156.–
223.–
all
146.–
146.–
146.–
156.–
156.–
223.–
all
146.–
146.–
146.–
156.–
156.–
223.–
all
146.–
146.–
146.–
156.–
156.–
223.–
all
146.–
146.–
146.–
156.–
156.–
223.–
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R. Possible on request
1)
Motor for use in shipping for higher ambient temperature and/or used as
155 (F) according to 130 (B), order with details in plain text. The order
codes for the basic marine version (E00, E11, E21, E31, E51) cannot be
combined with each other.
Recommended retail prices plus metal surcharges (MS)
5
2)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
3)
Option or plain text data only necessary for one motor when ordering
several motors of the same type.
Siemens D 81.1 P · 03/2015
5/21
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
Special versions
Explosion-proof motors – Cast-iron series 1LA6, 1LG4/6
Special versions
5
Additional
identification code
-Z
with order
code and
plain text
if required
Motor category
Motor
Motor
version
type
(castiron)
Zone 2
1LA6/
Ex nA II, 1LG4
Zone 21/
22 Ex t
IE1
Zone 2
1LG6
Ex nA II,
Zone 21/
22 Ex t
IE2/
NEMA
Energy
Efficient
Motor
Motor
version
type
Order
1L . . . . . - . . . . . -Z code
Marine version – Basic version 3)
Without type test certificate
E00
all
according to ABS 50 °C/CCS
45 °C/RINA 45 °C, temperature
class 155 (F) used according
to 155 (F) (if acceptance test
certificate 3.1 according to
EN 10204 is required, this must
be ordered with order code
B02) 4)
With type test certificate
E11
all
according to GL (Germanischer
Lloyd), Germany, CT 45 °C,
Temperature class 155 (F)
used acc. to 155 (F)
E21
all
With type test certificate
according to LR (Lloyds
Register), Great Britain,
CT 45 °C, Temperature class
155 (F) used acc. to 155 (F)
With type test certificate
E31
all
according to BV (Bureau
Veritas), France, CT 45 °C,
Temperature class 155 (F)
used acc. to 155 (F)
With type test certificate
E46
all
according to RS (Russian
Maritime Register of Shipping),
Russia, CT 45 °C, Temperature
class 155 (F) used acc. to
155 (F)
With type test certificate
E51
all
according to DNV (Det Norske
Veritas), Norway, CT 45 °C,
temperature class 155 (F)
used acc. to 155 (F)
Marine version – Acceptance/certification
Individual acceptance by
E10
all
marine classification society
plain text all
if required
Type test with heat run for
F83
all
horizontal motors,
with acceptance 5)
plain text all
Type test with heat run for
if required
vertical motors,
with acceptance 5)
10
Additional charges plus MS EUR, standard delivery time (colored area)
Motor type – Frame size
100
112
132
160
180
200
225
250
1LA6 1)
On
request
280
315
1LG4
1LG6 2)
Frame size
100
112
132
160
180
200
225
250
280
315
all
72.80
72.80
72.80
72.80
104.–
104.–
104.–
107.–
107.–
107.–
all
146.–
146.–
146.–
156.–
156.–
223.–
223.–
293.–
432.–
772.–
all
152.–
152.–
152.–
162.–
162.–
232.–
232.–
305.–
449.–
803.–
all
152.–
152.–
152.–
162.–
162.–
232.–
232.–
305.–
449.–
803.–
all
146.–
146.–
146.–
156.–
156.–
223.–
223.–
293.–
432.–
772.–
all
152.–
152.–
152.–
162.–
162.–
232.–
232.–
305.–
449.–
803.–
all
all
–
O. R.
–
O. R.
–
O. R.
–
O. R.
7810.–
–
7810.–
–
7810.–
–
8820.–
–
8820.–
–
8820.–
–
all
6730.–
6730.–
7300.–
7720.–
8820.–
9850.–
10400.– 10400.– 11600.– 13200.–
all
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
•
This order code only determines the price of the version –
Additional plain text is required.
O. R. Possible on request
–
Not possible
1)
Zone 21 Ex tD is not possible for 1LA6 motors.
2)
Order identically priced predecessor type for 1LG6...2AA../ 1LG6...2AB..
or 4-pole motors 1LG6...4AA.. to be ordered using options for marine
certificates and explosion-proof version. For increased output of motors
1LG6 ■■-■M■ .. from 160 kW to 315 kW, a marine version and
Ex-version are not possible.
5/22
Siemens D 81.1 P · 03/2015
3)
Motor for use in shipping for higher ambient temperature and/or used as
155 (F) according to 130 (B), order with details in plain text. The order
codes for the basic marine version (E00, E11, E21, E31, E51) cannot be
combined with each other.
4)
The delivery time for the factory test certificate may differ from the delivery
time for the motor.
5)
Option or plain text data only necessary for one motor when ordering
several motors of the same type.
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
On
request
Special versions
N-compact Non-Standard Motors – Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
(castiron)
Mains-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z Order code
Marine version – Non-Essential Service
Technical design
Designed in accordance with ABS (American Bureau of Shipping), USA, X00
Non-Essential Service
Designed in accordance with BV (Bureau Veritas), France,
Non-Essential Service
X01
Designed in accordance with CCS (Chinese Classification Society),
China,
Non-Essential Service
–
Note: Non-Essential Service must be handled by CCS
as an Essential Service.
Designed in accordance with DNV (Det Norske Veritas), Norway,
Non-Essential Service
X03
Designed in accordance with GL (Germanischer Lloyd), Germany,
Non-Essential Service
X04
Designed in accordance with KR (Korean Register of Shipping), Korea, X05
Non-Essential Service
Designed in accordance with LR (Lloyds Register), Great Britain,
Non-Essential Service
X06
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex t
Motor
Motor
version
type
Mains-fed
operation
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Additional charges plus MS EUR,
standard delivery time (colored area)
Motor type – Frame size
315
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
355
400
450
Frame size
315
355
400
450
10200.–
10200.–
10200.–
10200.–
12500.–
10200.–
10700.–
10700.–
10700.–
10700.–
13300.–
10700.–
11200.–
11200.–
11200.–
11200.–
14200.–
11200.–
11800.–
11800.–
11800.–
11800.–
15600.–
11800.–
10200.–
10200.–
10200.–
10200.–
12500.–
10200.–
10700.–
10700.–
10700.–
10700.–
13300.–
10700.–
11200.–
11200.–
11200.–
11200.–
14200.–
11200.–
11800.–
11800.–
11800.–
11800.–
15600.–
11800.–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
10200.–
10200.–
10200.–
10200.–
12500.–
10200.–
10700.–
10700.–
10700.–
10700.–
13300.–
10700.–
11200.–
11200.–
11200.–
11200.–
14200.–
11200.–
11800.–
11800.–
11800.–
11800.–
15600.–
11800.–
10200.–
10200.–
10200.–
10200.–
12500.–
10200.–
10700.–
10700.–
10700.–
10700.–
13300.–
10700.–
11200.–
11200.–
11200.–
11200.–
14200.–
11200.–
11800.–
11800.–
11800.–
11800.–
15600.–
11800.–
10200.–
10200.–
10200.–
10200.–
12500.–
10200.–
10700.–
10700.–
10700.–
10700.–
13300.–
10700.–
11200.–
11200.–
11200.–
11200.–
14200.–
11200.–
11800.–
11800.–
11800.–
11800.–
15600.–
11800.–
10200.–
10200.–
10200.–
10200.–
12500.–
10200.–
10700.–
10700.–
10700.–
10700.–
13300.–
10700.–
11200.–
11200.–
11200.–
11200.–
14200.–
11200.–
11800.–
11800.–
11800.–
11800.–
15600.–
11800.–
For legends, see Page 5/28.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
5/23
5
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
On
request
Special versions
N-compact Non-Standard Motors – Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
(castiron)
Mains-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z Order code
Marine version – Essential Service
Technical design
Designed in accordance with ABS (American Bureau of Shipping), USA, X10
Essential Service
5
Designed in accordance with BV (Bureau Veritas), France,
Essential Service
X11
Designed in accordance with CCS (Chinese Classification Society),
China, Essential Service
X12
Designed in accordance with DNV (Det Norske Veritas), Norway,
Essential Service
X13
Designed in accordance with GL (Germanischer Lloyd), Germany,
Essential Service
X14
Designed in accordance with KR (Korean Register of Shipping), Korea, X15
Essential Service
Designed in accordance with LR (Lloyds Register), Great Britain,
Essential Service
X16
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex t
Motor
Motor
version
type
Mains-fed
operation
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Additional charges plus MS EUR,
standard delivery time (colored area)
Motor type – Frame size
315
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
355
400
450
Frame size
315
355
400
450
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
For legends, see Page 5/28.
5/24
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
On
request
Special versions
N-compact Non-Standard Motors – Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
(castiron)
Mains-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z Order code
Marine version – Essential Service (continued)
Certification
Certification for first motor according to ABS (American Bureau of
Shipping), USA, Essential Service
Certification for additional motors according to ABS (American Bureau
of Shipping), USA, Essential Service
Certification for first motor according to BV (Bureau Veritas), France,
Essential Service
Certification for additional motors according to BV (Bureau Veritas),
France, Essential Service
Certification for first motor according to CCS (Chinese Classification
Society), China, Essential Service
Certification for additional motors according to CCS (Chinese
Classification Society), China, Essential Service
Certification for first motor according to DNV (Det Norske Veritas),
Norway, Essential Service
Certification for additional motors according to DNV (Det Norske
Veritas), Norway, Essential Service
Certification for first motor according to GL (Germanischer Lloyd),
Deutschland, Essential Service
Certification for additional motors according to GL (Germanischer
Lloyd), Germany, Essential Service
Certification for first motor according to KR (Korean Register of
Shipping), Korea, Essential Service
Certification for additional motors according to KR (Korean Register of
Shipping), Korea, Essential Service
Certification for first motor according to LR (Lloyds Register),
Great Britain, Essential Service
Certification for additional motors according to LR (Lloyds Register),
Great Britain, Essential Service
Tests
Tests for first motor according to ABS (American Bureau of Shipping),
USA, Essential Service
Tests for additional motors according to ABS (American Bureau of
Shipping), USA, Essential Service
Tests for first motor according to BV (Bureau Veritas), France,
Essential Service
Tests for additional motors according to BV (Bureau Veritas), France,
Essential Service
Tests for first motor according to CCS (Chinese Classification Society),
China, Essential Service
Tests for additional motors according to CCS (Chinese Classification
Society), China, Essential Service
Tests for first motor according to DNV (Det Norske Veritas), Norway,
Essential Service
Tests for additional motors according to DNV (Det Norske Veritas),
Norway, Essential Service
Tests for first motor according to GL (Germanischer Lloyd),
Deutschland, Essential Service
Tests for additional motors according to GL (Germanischer Lloyd),
Deutschland, Essential Service
Tests for first motor according to KR (Korean Register of Shipping),
Korea, Essential Service
Tests for additional motors according to KR (Korean Register of
Shipping), Korea, Essential Service
Tests for first motor according to LR (Lloyds Register), Great Britain,
Essential Service
Tests for additional motors according to LR (Lloyds Register),
Great Britain, Essential Service
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex t
Motor
Motor
version
type
Additional charges plus MS EUR,
standard delivery time (colored area)
Motor type – Frame size
315
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
355
400
450
Frame size
315
355
400
450
J70
all
all
15100.– 15100.– 15100.– 15100.–
J71
all
all
570.–
J72
all
all
19800.– 19800.– 19800.– 19800.–
J73
all
all
570.–
J74
all
all
10600.– 10600.– 10600.– 10600.–
J75
all
all
570.–
J76
all
all
19300.– 19300.– 19300.– 19300.–
J77
all
all
570.–
J78
all
all
15200.– 15200.– 15200.– 15200.–
J79
all
all
570.–
570.–
570.–
570.–
J80
all
all
8260.–
8260.–
8260.–
8260.–
J81
all
all
570.–
570.–
570.–
570.–
J82
all
all
20100.– 20100.– 20100.– 20100.–
J83
all
all
570.–
X30
all
all
58200.– 61200.– 65500.– 72800.–
X31
all
all
17600.– 18400.– 19800.– 21900.–
X32
all
all
58200.– 61200.– 65500.– 72800.–
X33
all
all
17600.– 18400.– 19800.– 21900.–
X34
all
all
60400.– 63400.– 67900.– 75500.–
X35
all
all
17600.– 18400.– 19800.– 21900.–
X36
all
all
60400.– 63400.– 67900.– 75500.–
X37
all
all
16400.– 17300.– 18500.– 20600.–
X38
all
all
41400.– 43500.– 46600.– 51700.–
X39
all
all
32400.– 34100.– 36500.– 40600.–
X40
all
all
58200.– 61000.– 65500.– 72700.–
X41
all
all
16400.– 17300.– 18400.– 20500.–
X42
all
all
56100.– 58900.– 63000.– 70000.–
X43
all
all
15300.– 16100.– 17300.– 19200.–
570.–
570.–
570.–
570.–
570.–
570.–
570.–
570.–
570.–
570.–
570.–
570.–
570.–
570.–
570.–
For legends, see Page 5/28.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
5/25
5
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
On
request
Special versions
N-compact Non-Standard Motors – Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
(castiron)
Mains-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z Order code
Marine version – Essential Service for Propulsion
Technical design
Designed in accordance with ABS (American Bureau of Shipping), USA, X20
Essential Service for Propulsion
5
Designed in accordance with BV (Bureau Veritas), France,
Essential Service for Propulsion
X21
Designed in accordance with CCS (Chinese Classification Society),
China, Essential Service for Propulsion
X22
Designed in accordance with DNV (Det Norske Veritas), Norway,
Essential Service for Propulsion
X23
Designed in accordance with GL (Germanischer Lloyd), Germany,
Essential Service for Propulsion
X24
Designed in accordance with KR (Korean Register of Shipping), Korea, X25
Essential Service for Propulsion
Designed in accordance with LR (Lloyds Register), Great Britain,
Essential Service for Propulsion
X26
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex t
Motor
Motor
version
type
Mains-fed
operation
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Additional charges plus MS EUR,
standard delivery time (colored area)
Motor type – Frame size
315
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
355
400
450
Frame size
315
355
400
450
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
2850.–
2850.–
2850.–
2850.–
3530.–
2850.–
3020.–
3020.–
3020.–
3020.–
3750.–
3020.–
3240.–
3240.–
3240.–
3240.–
3980.–
3240.–
3590.–
3590.–
3590.–
3590.–
4390.–
3590.–
For legends, see Page 5/28.
5/26
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
On
request
Special versions
N-compact Non-Standard Motors – Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
(castiron)
Mains-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z
Marine version – Essential Service for Propulsion(continued)
Certification
Certification for first motor according to ABS (American Bureau of
Shipping), USA, Essential Service for Propulsion
Certification for additional motors according to ABS (American Bureau
of Shipping), USA, Essential Service for Propulsion
Certification for first motor according to BV (Bureau Veritas), France,
Essential Service for Propulsion
Additional charges plus MS EUR,
standard delivery time (colored area)
Motor type – Frame size
315
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
355
400
450
Frame size
315
355
400
450
Order code
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex t
Motor
Motor
version
type
N40
all
all
23100.– 23100.– 23100.– 23100.–
N41
all
all
11200.– 11200.– 11200.– 11200.–
N42
Mains-fed
operation
Certification for additional motors according to BV (Bureau Veritas),
France, Essential Service for Propulsion
N43
Certification for first motor according to CCS (Chinese Classification
Society), China, Essential Service for Propulsion
Certification for additional motors according to CCS (Chinese
Classification Society), China, Essential Service for Propulsion
Certification for first motor according to DNV (Det Norske Veritas),
Norway, Essential Service for Propulsion
N44
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
all
all
N45
all
N46
Mains-fed
operation
Certification for additional motors according to DNV (Det Norske
Veritas),
Norway, Essential Service for Propulsion
N47
Certification for first motor according to GL (Germanischer Lloyd),
Germany, Essential Service for Propulsion
N48
Certification for additional motors according to GL (Germanischer
Lloyd), Germany, Essential Service for Propulsion
N49
Certification for first motor according to KR (Korean Register of
Shipping), Korea, Essential Service for Propulsion
Certification for additional motors according to KR (Korean Register of
Shipping), Korea, Essential Service for Propulsion
all
28100.–
28100.–
28100.–
28100.–
29100.–
28100.–
28100.–
28100.–
28100.–
28100.–
29100.–
28100.–
33400.–
33400.–
33400.–
33400.–
34500.–
33400.–
33400.–
33400.–
33400.–
33400.–
34500.–
33400.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.– 12500.– 12500.– 12500.–
26000.– 26000.– 26000.– 26000.–
27800.–
27800.–
27800.–
27800.–
28900.–
27800.–
27800.–
27800.–
27800.–
27800.–
28900.–
27800.–
27800.–
27800.–
27800.–
27800.–
28900.–
27800.–
27800.–
27800.–
27800.–
27800.–
28900.–
27800.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
29600.–
29600.–
29600.–
29600.–
30800.–
29600.–
29600.–
29600.–
29600.–
29600.–
30800.–
29600.–
29600.–
29600.–
29600.–
29600.–
30800.–
29600.–
29600.–
29600.–
29600.–
29600.–
30800.–
29600.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
N50
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
all
all
N51
all
12500.– 12500.– 12500.– 12500.–
all
18800.– 18800.– 18800.– 18800.–
For legends, see Page 5/28.
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
5/27
5
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Standard delivery times in working days:
On
request
Special versions
N-compact Non-Standard Motors – Cast-iron series 1LA8, 1LL8, 1PQ8
Special versions
Additional
identification
code -Z
with order code
and plain text
if required
Motor category
Motor
version
Motor
type
(castiron)
Mains-fed
operation
1PQ8. . . - . . . . . -Z
1L . . . . . - . . . . . -Z Order code
Marine version – Essential Service for Propulsion(continued)
Certification (continued)
Certification for first motor according to LR (Lloyds Register),
N52
Great Britain, Essential Service for Propulsion
Certification for additional motors according to LR (Lloyds Register),
Great Britain, Essential Service for Propulsion
5
N53
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex t
Motor
Motor
version
type
Mains-fed
operation
1LA8
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Mains-fed
1LA8
operation
1LL8
Converter-fed 1LA8
operation
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
Tests
Tests for first motor according to ABS (American Bureau of Shipping), X60
all
USA, Essential Service for Propulsion
X61
all
Tests for additional motors according to ABS (American Bureau of
Shipping), USA, Essential Service for Propulsion
Tests for first motor according to BV (Bureau Veritas), France,
X62
all
Essential Service for Propulsion
X63
all
Tests for additional motors according to BV (Bureau Veritas), France,
Essential Service for Propulsion
all
Tests for first motor according to CCS (Chinese Classification Society), X64
China, Essential Service for Propulsion
Tests for additional motors according to CCS (Chinese Classification
X65
all
Society), China, Essential Service for Propulsion
X66
all
Tests for first motor according to DNV (Det Norske Veritas), Norway,
Essential Service for Propulsion
X67
all
Tests for additional motors according to DNV (Det Norske Veritas),
Norway, Essential Service for Propulsion
Tests for first motor according to GL (Germanischer Lloyd), Germany,
X68
all
Essential Service for Propulsion
X69
all
Tests for additional motors according to GL (Germanischer Lloyd),
Germany, Essential Service for Propulsion
X70
all
Tests for first motor according to KR (Korean Register of Shipping),
Korea, Essential Service for Propulsion
Tests for additional motors according to KR (Korean Register of
X71
all
Shipping), Korea, Essential Service for Propulsion
X72
all
Tests for first motor according to LR (Lloyds Register), Great Britain,
Essential Service for Propulsion
X73
all
Tests for additional motors according to LR (Lloyds Register),
Great Britain, Essential Service for Propulsion
Marine version – Additional options for Essential Service and Essential Service for Propulsion
Tests in presence of representatives of the customer
X99
all
(in addition to the inspector of the classification society)
E80 • and
Mains-fed
Motor for use in shipping, higher ambient temperature
identification
operation
and/or use of temperature class 155 (F) according to 130 (B)
code
Converter-fed
operation
315
1LA8
1LL8
1LA8
1LL8
1PQ8
1LA8
355
400
450
Frame size
315
355
400
450
32300.–
32300.–
32300.–
32300.–
33400.–
32300.–
32300.–
32300.–
32300.–
32300.–
33400.–
32300.–
32300.–
32300.–
32300.–
32300.–
33400.–
32300.–
32300.–
32300.–
32300.–
32300.–
33400.–
32300.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
12500.–
12500.–
12500.–
12500.–
13500.–
12500.–
all
58200.– 61200.– 65500.– 72800.–
all
17600.– 18400.– 19800.– 21900.–
all
58200.– 61200.– 65500.– 72800.–
all
17600.– 18400.– 19800.– 21900.–
all
60400.– 63400.– 67900.– 75500.–
all
17600.– 18400.– 19800.– 21900.–
all
60400.– 63400.– 67900.– 75500.–
all
16400.– 17300.– 18500.– 20600.–
all
41400.– 43500.– 46600.– 51700.–
all
32400.– 34100.– 36500.– 40600.–
all
58200.– 61000.– 65500.– 72700.–
all
16400.– 17300.– 18400.– 20500.–
all
56100.– 58900.– 63000.– 70000.–
all
15300.– 16100.– 17300.– 19200.–
all
1420.–
1420.–
1420.–
1420.–
18100.–
18100.–
18100.–
18100.–
21100.–
18100.–
20500.–
20500.–
20500.–
20500.–
23500.–
20500.–
38100.–
38100.–
38100.–
38100.–
41000.–
38100.–
46300.–
46300.–
46300.–
46300.–
49400.–
46300.–
1LA8
1LL8
1LA8
1LL8
1PQ8
Zone 2 Ex nA II, 1LA8
Zone 22 Ex tD
–
Additional charges plus MS EUR,
standard delivery time (colored area)
Motor type – Frame size
Not possible
5/28
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Special versions
N-compact Non-Standard Motors – Cast-iron series 1LA8, 1LL8, 1PQ8
Ordering example:
Selection criteria
Requirement
Structure of the Article No.
1st ordering example: 5 motors for Non-Essential Service according to GL (Germanischer Lloyd), Germany
Motor type
Non-standard motor specially designed for mains-fed operation, self-ventilated, 1LA8■■■-■■■■■
cast-iron version, IP55 degree of protection
Motor frame size/No. of poles/Speed 400/8-pole/750 rpm
1LA8405-8AB■■
Rated output
400 kW
Voltage and frequency
500 VΔ, 50 Hz
1LA8405-8AB5■
Type
IM B3
1LA8405-8AB50
Special versions
Technical design in accordance with GL (Germanischer Lloyd), Germany,
1LA8405-8AB50-Z X04
Non-Essential Service
Article No. for each of the 5 motors
1LA8405-8AB50-Z X04
2nd ordering example: 7 motors for Essential Service according to BV (Bureau Veritas), France
Motor type
Non-standard motor especially for converters, self-ventilated with
1LL8■■■-■■■■■
throughventilation, cast-iron version, IP23 degree of protection
Motor frame size/No. of poles/Speed 400/2-pole/3000 rpm
1LL8405-2PD■■
Rated output
1000 kW
Voltage and frequency
400 VΔ/690 VY, 50 Hz
1LL8405-2PD8■
Type
IM V1 with protective cover
1LL8405-2PD84
Special versions
1st motor
Technical design in accordance with BV (Bureau Veritas), France,
1LL8405-2PD84-Z X11
Essential Service
Necessary certification for first motor ordered in accordance with BV
1LL8405-2PD84-Z X11+J72
(Bureau Veritas), France, Essential Service
Necessary tests for first motor ordered in accordance with BV (Bureau Veritas), 1LL8405-2PD84-Z X11+J72+X32
France, Essential Service
Article No. for 1st motor
1LL8405-2PD84-Z X11+J72+X32
Additional 6 motors
Technical design in accordance with BV (Bureau Veritas), France,
1LL8405-2PD84-Z X11
(additional motors)
Essential Service
Necessary certifications for additional motors ordered in accordance with BV
1LL8405-2PD84-Z X11+J73
(Bureau Veritas), France, Essential Service
Necessary tests for additional motors ordered in accordance with BV (Bureau
1LL8405-2PD84-Z X11+J73+X33
Veritas), France, Essential Service
Article No. for the additional 6 motors
1LL8405-2PD84-Z X11+J73+X33
3rd ordering example: 3 motors for Essential Service for Propulsion according to ABS (American Bureau of Shipping), USA
Motor type
Non-standard motor specially designed for mains-fed operation, self-ventilated, 1LA8■■■-■■■■■
cast-iron version, IP55 degree of protection
Motor frame size/No. of poles/Speed 400/8-pole/750 rpm
1LA8405-8AB■■
Rated output
400 kW
Voltage and frequency
500 VΔ, 50 Hz
1LA8405-8AB5■
Type
IM B3
1LA8405-8AB50
Special versions
1st motor
Technical design in accordance with ABS (American Bureau of Shipping), USA, 1LA8405-8AB50-Z X20
Essential Service for Propulsion
Necessary certifications for first motor ordered in accordance with ABS
1LA8405-8AB50-Z X20+N40
(American Bureau of Shipping), USA, Essential Service for Propulsion
Necessary tests for first motor ordered in accordance with ABS
1LA8405-8AB50-Z X20+N40+X60
(American Bureau of Shipping), USA, Essential Service for Propulsion
Article No. for 1st motor
1LA8405-8AB50-Z X20+N40+X60
Additional 2 motors
Technical design in accordance with ABS (American Bureau of Shipping), USA, 1LA8405-8AB50-Z X20
(additional motors)
Essential Service for Propulsion
Necessary certifications for additional motors ordered in accordance with ABS 1LA8405-8AB50-Z X20+N41
(American Bureau of Shipping), USA, Essential Service for Propulsion
Necessary tests for additional motors ordered in accordance with ABS
1LA8405-8AB50-Z X20+N41+X61
(American Bureau of Shipping), USA, Essential Service for Propulsion
Article No. for the additional 2 motors
1LA8405-8AB50-Z X20+N41+X61
4th ordering example: 1 motor for Essential Service according to ABS (American Bureau of Shipping), USA, coolant temperature 60 °C:
Motor type
Non-standard motor specially designed for mains-fed operation, self-ventilated, 1LA8■■■-■■■■■
cast-iron version, IP55 degree of protection
Motor frame size/No. of poles/Speed 400/8-pole/750 rpm
1LA8405-8AB■■
Rated output
400 kW
Voltage and frequency
500 VΔ, 50 Hz
1LA8405-8AB5■
Type
IM B3
1LA8405-8AB50
Special versions
Technical design in accordance with ABS (American Bureau of Shipping), USA, 1LA8405-8AB50-Z X10
Essential Service
Necessary certifications for first motor ordered in accordance with ABS
1LA8405-8AB50-Z X10+J70
(American Bureau of Shipping), USA, Essential Service
Necessary tests for first motor ordered in accordance with ABS
1LA8405-8AB50-Z X10+J70+X30
(American Bureau of Shipping), USA, Essential Service
Motor for use in shipping, higher ambient temperature and/or use of temperature 1LA8405-8AB50-Z X10+J70+X30+E80
class 155 (F) according to 130 (B) – Coolant temperature 60 °C
Plain text: COOLANT TEMP CT60
Article No. for the motor
1LA8405-8AB50-Z X10+J70+X30+E80
Plain text: COOLANT TEMP CT60
Recommended retail prices plus metal surcharges (MS)
Siemens D 81.1 P · 03/2015
5/29
5
© Siemens AG 2015
SIMOTICS DP Application-specific Motors
Marine motors
Notes
5
5/30
Siemens D 81.1 P · 03/2015
Recommended retail prices plus metal surcharges (MS)
6
© Siemens AG 2015
Appendix
6/2
Partner at Siemens
6/3
6/3
Online Services
Information and Ordering in the Internet
and on DVD
Siemens Industry Automation and
Drive Technologies in the WWW
Product Selection using the
Interactive Catalog CA 01
Easy Shopping with the Industry Mall
Information and Download Center
Downloading Catalogs
6/3
6/3
6/3
6/4
6/4
6/5
6/5
6/6
6/6
6/6
6/7
6/7
6/7
6/8
6/8
6/8
6/9
6/9
6/9
6/13
6/13
Industry Services
Your machines and plant can do more
– with Industry Services.
Industry Services for the entire life cycle
Online Support
Technical Support
Spare Parts
Repair Services
Field Services
Training
Technical Consulting & Engineering
Support
Energy & Environmental Services
Modernization & Optimization Services
Plant Maintenance & Condition Monitoring
Service Contracts
6/14
6/14
6/14
6/14
6/14
6/15
Metal surcharges
Explanation of the raw material/
metal surcharges
Surcharge calculation
Structure of the metal factor
Weight method
Percentage method
Metal factor examples
Explanation of the raw material/
metal surcharges for dysprosium and
neodym (rare earths)
Surcharge calculation
Three-month average price
Structure of the metal factor
Weight method
Metal factor examples
Values of the metal factor
6/16
6/16
6/16
6/16
6/16
Conditions of sale and delivery
General Provisions
Prices
Additional Terms and Conditions
Export regulations
6/13
6/13
6/13
6/13
6/13
6/14
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Appendix
Partner at Siemens
At Siemens Industry we are resolutely pursuing the same goal:
long-term improvement of your competitive ability.
We are committed to this goal. Thanks to our commitment,
we continue to set new standards in automation and drive
technology. In all industries – worldwide.
At your service locally, around the globe for consulting, sales,
training, service, support, spare parts ... on the entire Industry
Automation and Drive Technologies range.
Your personal contact can be found in our Contacts Database at:
www.siemens.com/automation/partner
You start by selecting
• the required competence,
• products and branches,
• a country,
• a city
or by a
• location search or
• person search.
6
6/2
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Appendix
Online Services
Information and Ordering
in the Internet and on DVD
■ Siemens Industry Automation and Drive Technologies in the WWW
A detailed knowledge of the range of products and services
available is essential when planning and configuring automation
systems. It goes without saying that this information must always
be fully up-to-date.
Siemens Industry Automation and Drive Technologies has
therefore built up a comprehensive range of information in the
World Wide Web, which offers quick and easy access to all data
required.
Under the address
www.siemens.com/industry
you will find everything you need to know about products,
systems and services.
■ Product Selection using the Interactive Catalog CA 01
Detailed information together with convenient interactive
functions:
The interactive catalog CA 01 covers more than 80 000 products
and thus provides a full summary of the Siemens Industry
Automation and Drive Technologies product base.
Here you will find everything that you need to solve tasks in the
fields of automation, switchgear, installation and drives.
All information is linked into a user interface which is easy to
work with and intuitive.
After selecting the product of your choice you can order at the
press of a button, by fax or by online link.
Information on the interactive catalog CA 01 can be found in the
Internet under
www.siemens.com/automation/ca01
or on DVD.
■ Easy Shopping with the Industry Mall
The Industry Mall is the electronic ordering platform of
Siemens AG on the Internet. Here you have online access
to a huge range of products presented in an informative and
attractive way.
Data transfer via EDIFACT allows the whole procedure from
selection through ordering to tracking and tracing of the order to
be carried out. Availability checks, customer-specific discounts
and preparation of quotes are also possible.
Numerous additional functions are available to support you.
For example, powerful search functions make it easy to select
the required products. Configurators enable you to configure
complex product and system components quickly and easily.
CAx data types are also provided here.
Please visit the Industry Mall on the Internet under:
www.siemens.com/industrymall
Siemens D 81.1 P · 03/2015
6/3
6
© Siemens AG 2015
Appendix
Online Services
Information and Download Center
■ Downloading Catalogs
In addition to numerous other useful documents, you can also
find the catalogs listed on the back inside cover of this catalog
in the Information and Download Center. Without having to
register, you can download these catalogs in PDF format or
increasingly as digital page-turning e-books.
The filter dialog box above the first catalog displayed makes it
possible to carry out targeted searches. If you enter "MD 3" for
example, you will find both the MD 30.1 and MD 31.1 catalogs.
If you enter "ST 70" both the ST 70 catalog and the associated
news or add-ons are displayed.
Visit us on the web at:
www.siemens.com/industry/infocenter
.
6
6/4
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Appendix
Industry Services
Your machines and plant can do more
– with Industry Services.
Whether it is production or process industry - in view of rising
cost pressure, growing energy costs, and increasingly stringent
environmental regulations, services for industry are a crucial
competitive factor in manufacturing as well as in process
industries.
All over the world Siemens supports its customers with product,
system, and application-related services throughout the entire
life cycle of a plant. Right from the earliest stages of planning,
engineering, and building, all the way to operation and modernization. These services enable customers to benefit from the
Siemens experts’ unique technological and product knowledge
and industry expertise.
Thus downtimes are reduced and the utilization of resources
is optimized. The bottom line: increased plant productivity,
flexibility, and efficiency, plus reduced overall costs.
Discover all advantages of our service portfolio:
www.siemens.com/industry-services
7HFKQLFDO&RQVXOWLQJ
(QJLQHHULQJ6XSSRUW
(QHUJ\
(QYLURQPHQWDO6HUYLFHV
7HFKQLFDO&RQVXOWLQJ
(QJLQHHULQJ6XSSRUW
(QHUJ\
(QYLURQPHQWDO6HUYLFHV
0RGHUQL]DWLRQ
2SWLPL]DWLRQ6HUYLFHV
Modernization
Modernization
Planning
Planning
Online Support
Technical Support
Spare Parts
Repair Services
Field Services
Training
Operation
Operation
7HFKQLFDO&RQVXOWLQJ
(QJLQHHULQJ6XSSRUW
Engineer
Engineer
&
& Build
Build
(QHUJ\
(QYLURQPHQWDO6HUYLFHV
3ODQW0DLQWHQDQFH
&RQGLWLRQ0RQLWRULQJ
6HUYLFH&RQWUDFWV
(QHUJ\(QYLURQPHQWDO6HUYLFHV
0RGHUQL]DWLRQ2SWLPL]DWLRQ6HUYLFHV
G_DA65_EN_00270
Siemens supports its clients with technology based Services across a plant's entire life cycle.
6
Siemens D 81.1 P · 03/2015
6/5
© Siemens AG 2015
Appendix
Industry Services
Industry Services
for the entire life cycle
Online Support
Online support is a comprehensive information system for all
questions relating to products, systems, and solutions that
Siemens has developed for industry over time. With more than
300,000 documents, examples and tools, it offers users of automation and drive technology a way to quickly find up-to-date
information. The 24-hour service enables direct, central access
to detailed product information as well as numerous solution
examples for programming, configuration and application.
The content, in six languages, is increasingly multimediabased
– and now also available as a mobile app. Online support’s
"Technical Forum" offers users the opportunity to share information with each other. The "Support Request" option can be used
to contact Siemens’ technical support experts. The latest content, software updates, and news via newsletters and Twitter
ensure that industry users are always up to date.
www.siemens.com/industry/onlinesupport
Online Support App
Using the Online Support app, you can access over 300,000
documents covering all Siemens industrial products - anywhere,
any time. Regardless of whether you need help implementing
your project, fault-finding, expanding your system or are
planning a new machine.
You have access to FAQs, manuals, certificates, characteristics
curves, application examples, product notices (e.g. announcements of new products) and information on successor products
in the event that a product is discontinued.
Just scan the product code printed on the product directly using
the camera of your mobile device to immediately see all technical
information available on this product at a glance. The graphical
CAx information (3D model, circuit diagrams or EPLAN macros) is
also displayed. You can forward this information to your workplace
using the e-mail function.
"mySupport". You also receive selected news on new functions,
important articles or events in the News section.
Scan the QR code
for information on
our Online Support
app.
The app is available free of charge from the Apple App Store
(iOS) or from Google Play (Android).
www.siemens.com/industry/onlinesupportapp
The search function retrieves product information and articles
and supports you with a personalized suggestion list. You can
find your favorite pages – articles you need frequently – under
Technical Support
6
The ability to quickly analyze system and error messages and
take appropriate action are key factors in ensuring that plants
run safely and efficiently. Questions can arise at any time and in
any industry, whether it’s an individual product or a complete
automation solution. Siemens technical support offers individual
technical assistance in matters related to functionality, how to
operate, applications, and fault clearance in industrial products
and systems – at any time and globally, over the phone, by email, or via remote access. Experienced experts from Siemens
answer incoming questions promptly. Depending on the requirements, they first consult specialists in the areas of development,
on-site services, and sales. Technical support is also available
for discontinued products that are no longer available. Using the
support request number, any inquiry can be clearly identified
and systematically tracked.
http://support.automation.siemens.com/WW/view/en/16605032
6/6
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Appendix
Industry Services
Industry Services
for the entire life cycle
Spare Parts
Drive and automation systems must be available at all times.
Even a single missing spare part can bring the entire plant to a
standstill – and result in substantial financial losses for the operator. The spare parts services from Siemens protects against
such losses – with the aid of quickly available, original spare
parts that ensure smooth interaction with all other system components. Spare parts are kept on hand for up to ten years; defective parts can be returned. For many products and solutions,
individual spare parts packages ensure a preventive stock of
spare parts on-site. The spare parts services is available around
the world and around the clock. Optimum supply chain logistics
ensure that replacement components reach their destination as
quickly as possible. Siemens’ logistics experts take care of planning and management as well as procurement, transportation,
customs handling, warehousing, and complete order management for spare parts.
http://support.automation.siemens.com/WW/view/en/43502238
Repair Services
Reliable electrical and electronic equipment is crucial for operating continuous processes. That is why it is essential that motors and converters always undergo highly specialized repair
and maintenance. Siemens offers complete customer and repair
services – on site and in repair centers – as well as technical
emergency services worldwide. The repair services include all
measures necessary to quickly restore the functionality of defective units. In addition, services such as spare parts logistics,
spare parts storage and rapid manufacturing are available to
plant operators in all verticals. With a global network of certified
repair shops operated by Siemens as well as third parties,
Siemens handles the maintenance and overhaul of motors,
converters, and other devices as an authorized service partner.
http://support.automation.siemens.com/WW/view/en/16610214
Field Services
It’s a top priority in all industries: the availability of plants and
equipment. Siemens offers specialized maintenance services
such as inspection and upkeep as well as rapid fault clearance
in industrial plants – worldwide, continuously, and even with
emergency services as needed. The services include startup as
well as maintenance and fault clearance during operation. The
startup service includes checking the installation, function tests,
parameterization, integration tests for machines and plants, trial
operation, final acceptance, and employee training. All services,
including remote maintenance of drives, are also available as
elements of customized service contracts.
6
http://support.automation.siemens.com/WW/view/en/66012486
Siemens D 81.1 P · 03/2015
6/7
© Siemens AG 2015
Appendix
Industry Services
Industry Services
for the entire life cycle
Training
Increasingly, up-to-date knowledge is becoming a determining
factor in success. One of the key resources of any company is
well-trained staff that can make the right decision at the right
moment and take full advantage of the potential. With SITRAIN –
Training for Industry, Siemens offers comprehensive advanced
training programs. The technical training courses convey expertise and practical knowledge directly from the manufacturer.
SITRAIN covers Siemens’ entire product and system portfolio in
the field of automation and drives. Together with the customer,
Siemens determines the company’s individual training needs
and then develops an advanced training program tailored to the
desired requirements. Additional services guarantee that the
knowledge of all Siemens partners and their employees is always up-to-date.
http://support.automation.siemens.com/WW/view/en/43514324
Technical Consulting & Engineering Support
The efficiency of plants and processes leads to sustainable
economic success. Individual services from Siemens help save
substantial time and money while also guaranteeing maximum
safety. Technical consulting covers the selection of products and
systems for efficient industrial plants. The services include planning, consulting, and conceptual design as well as product
training, application support, and configuration verification – in
all phases of a plant’s lifecycle and in all questions related to
product safety. Engineering support offers competent assistance throughout the entire project, from developing a precise
structure for startup to product-specific preparation for implementation as well as support services in areas such as prototype
development, testing and acceptance.
http://support.automation.siemens.com/WW/view/en/16605680
Energy & Environmental Services
6
Efficient energy use and resource conservation – these top sustainability concerns pay off – both for the environment and for
companies. Siemens offers integrated solutions that unlock all
technical and organizational potential for successful environmental management. Customized consulting services are aimed
at sustainably lowering the cost of energy and environmental
protection and thus increasing plant efficiency and availability.
The experts provide support in the conceptual design and implementation of systematic solutions in energy and environmental management, enabling maximum energy efficiency and
optimized water consumption throughout the entire company.
Improved data transparency makes it possible to identify
savings potential, reduce emissions, optimize production
processes, and thereby noticeably cut costs.
http://support.automation.siemens.com/WW/view/en/42350774
6/8
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Appendix
Industry Services
Industry Services
for the entire life cycle
Modernization & Optimization Services
High machine availability, expanded functionality and selective
energy savings – in all industries, these are decisive factors for
increasing productivity and lowering costs. Whether a company
wants to modernize individual machines, optimize drive systems, or upgrade entire plants, Siemens’ experts support the
projects from planning to commissioning.
Expert consulting and project management with solution responsibility lead to security and make it possible to specifically identify savings potential in production. This secures investments
over the long term and increases economic efficiency in operation.
http://support.automation.siemens.com/WW/view/en/66005532
Plant Maintenance & Condition Monitoring
Modern industrial plants are complex and highly automated.
They must operate efficiently in order to ensure the company’s
competitive strength. In addition, the steadily increasing networking of machines and plants require consistent security concepts. Maintenance and status monitoring as well as the implementation of integrated security concepts by Siemens’ experts
support optimum plant use and avoid downtime. The services
include maintenance management as well as consulting on
maintenance concepts, including the complete handling and
execution of the necessary measures. Complete solutions also
cover remote services, including analysis, remote diagnosis,
and remote monitoring. These are based on the Siemens
Remote Services platform with certified IT security.
http://support.automation.siemens.com/WW/view/en/59456862
Service Contracts
Making maintenance costs calculable, reducing interfaces,
speeding up response times, and unburdening the company’s
resources – the reduced downtimes that these measures
achieve increase the productivity of a plant. Service contracts
from Siemens make maintenance and repairs more cost-effective and efficient. The service packages include local and remote maintenance for a system or product group in automation
and drive technology. Whether you need extended service
periods, defined response times, or special maintenance intervals, the services are compiled individually and according to
need. They can be adjusted flexibly at any time and used independently of each other. The expertise of Siemens’ specialists
and the capabilities of remote maintenance thus ensure reliable
and fast maintenance processes throughout a plant’s entire lifecycle.
6
http://support.automation.siemens.com/WW/view/en/65961857
Siemens D 81.1 P · 03/2015
6/9
© Siemens AG 2015
Appendix
Industry Services
Notes
6
6/10
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Appendix
Industry Services
Notes
6
Siemens D 81.1 P · 03/2015
6/11
© Siemens AG 2015
Appendix
Industry Services
Notes
6
6/12
Siemens D 81.1 P · 03/2015
© Siemens AG 2015
Appendix
Metal surcharges
■ Explanation of the raw material/metal surcharges 1) 2) 3) 4)
Surcharge calculation
To compensate for variations in the price of the raw materials
silver, copper, aluminum, lead, gold, dysprosium2) and/or
neodym2), surcharges are calculated on a daily basis using the
so-called metal factor for products containing these raw
materials. A surcharge for the respective raw material is calculated as a supplement to the price of a product if the basic
official price of the raw material in question is exceeded.
The surcharges are calculated in accordance with the following
criteria:
• Basic official price of the raw material
Basic official price from the day prior to receipt of the order or
prior to release order (= daily price) for3)
- Silver (sales price, processed)
- Gold (sales price, processed)
Percentage method
Use of the percentage method is indicated by the letters A-Z at
the respective digit of the metal factor.
The surcharge is increased - dependent on the deviation of the
daily price compared with the basic official price - using the percentage method in "steps" and consequently offers surcharges
that remain constant within the framework of this "step range". A
higher percentage rate is charged for each new step. The respective percentage level can be found in the table below.
Metal factor examples
LEA–––––
Basis for % surcharge: List price
Silver Basis 150 €, Step 50 €, 0.5 %
4)
and for
- Copper (lower DEL notation + 1 %)
- Aluminum (aluminum in cables) and
- Lead (lead in cables)
• Metal factor of the products
Certain products are displayed with a metal factor. The metal
factor determines the official price (for those raw materials
concerned) as of which the metal surcharges are applied and
the calculation method used (weight or percentage method).
An exact explanation is given below.
Copper Basis 150 €, Step 50 €, 0.1 %
No surcharge for aluminum
No surcharge for lead
No surcharge for gold
No surcharge for dysprosium
No surcharge for neodym
N –A6 ––––
Structure of the metal factor
Basis for % surcharge: Customer net price
The metal factor consists of several digits; the first digit indicates
whether the percentage method of calculation refers to the list
price or a possible discounted price (customer net price) (L = list
price / N = customer net price).
No surcharge for silver
Copper Basis 150 €, Step 50 €, 0.1 %
Aluminum acc. to weight, basic offic. price 225 €
The remaining digits indicate the method of calculation used for
the respective raw material. If no surcharge is added for a raw
material, a "-" is used.
No surcharge for lead
No surcharge for gold
No surcharge for dysprosium
1st digit
List or customer net price using the percentage method
2nd digit
for silver (AG)
3rd digit
for copper (CU)
4th digit
for aluminum (AL)
No basis necessary
5th digit
for lead (PB)
No surcharge for silver
6th digit
for gold (AU)
Copper acc. to weight, basic official price 150 €
7th digit
for dysprosium (Dy)2)
No surcharge for aluminum
8th digit
for neodym (Nd)2)
No surcharge for lead
No surcharge for neodym
– –3 – – – – –
No surcharge for gold
Weight method
The weight method uses the basic official price, the daily price
and the raw material weight. In order to calculate the surcharge,
the basic official price must be subtracted from the daily price.
The difference is then multiplied by the raw material weight.
No surcharge for dysprosium
No surcharge for neodym
The basic official price can be found in the table below using the
number (1 to 9) of the respective digit of the metal factor. The raw
material weight can be found in the respective product descriptions.
6
1)
2)
3)
4)
Refer to the separate explanation on the next page regarding the raw
materials dysprosium and neodym (= rare earths).
For a different method of calculation, refer to the separate explanation
for these raw materials on the next page.
Source: Umicore, Hanau (www.metalsmanagement.umicore.com).
Source: German Trade Association for Cables and Conductors
(www.kabelverband.org).
Siemens D 81.1 P · 03/2015
6/13
© Siemens AG 2015
Appendix
Metal surcharges
■ Explanation of the raw material/metal surcharges for dysprosium and neodym (rare earths)1) 2)
Surcharge calculation
To compensate for variations in the price of the raw materials
silver1), copper1), aluminum1), lead1), gold1), dysprosium and/or
neodym, surcharges are calculated on a daily basis using the
so-called metal factor for products containing these raw
materials. The surcharge for dysprosium and neodym is calculated as a supplement to the price of a product if the basic
official price of the raw material in question is exceeded.
The surcharge is calculated in accordance with the following
criteria:
• Basic official price of the raw material2)
Three-month basic average price (see below) in the period
before the quarter in which the order was received or the
release order took place (= average official price) for
- Dysprosium (Dy metal, 99 % min. FOB China; USD/kg)
- Neodym (Nd metal, 99 % min. FOB China; USD/kg)
• Metal factor of the products
Certain products are displayed with a metal factor. The metal
factor indicates (for those raw materials concerned) the basic
official price as of which the surcharges for dysprosium and
neodym are calculated using the weight method. An exact
explanation of the metal factor is given below.
Three-month average price
The prices of rare earths vary according to the foreign currency,
and there is no freely accessible stock exchange listing. This
makes it more difficult for all parties involved to monitor changes
in price. In order to avoid continuous adjustment of the surcharges, but to still ensure fair, transparent pricing, an average
price is calculated over a three-month period using the average
monthly foreign exchange rate from USD to EUR (source: European Central Bank). Since not all facts are immediately available
at the start of each month, a one-month buffer is allowed before
the new average price applies.
Examples of calculation of the average official price:
Period for calculation of
the average price:
Period during which the order/release order is
effected and the average price applies:
Sep 2012 - Nov 2012
Q1 in 2013 (Jan - Mar)
Dec 2012 - Feb 2013
Q2 in 2013 (Apr - Jun)
Mar 2013 - May 2013
Q3 in 2013 (Jul - Sep)
Jun 2013 - Aug 2013
Q4 in 2013 (Oct - Dec)
Structure of the metal factor
The metal factor consists of several digits; the first digit is not
relevant to the calculation of dysprosium and neodym.
The remaining digits indicate the method of calculation used for
the respective raw material. If no surcharge is added for a raw
material, a "-" is used.
6
1st digit
List or customer net price using the percentage method
2nd digit
for silver (AG)1)
3rd digit
for copper (CU)1)
4th digit
for aluminum (AL)1)
5th digit
for lead (PB)1)
6th digit
for gold (AU)1)
7th digit
for dysprosium (Dy)
8th digit
for neodym (Nd)
1)
2)
For a different method of calculation, refer to the separate explanation
for these raw materials on the previous page.
Source: Asian Metal Ltd (www.asianmetal.com)
6/14
Siemens D 81.1 P · 03/2015
Weight method
The weight method uses the basic official price, the average
price and the raw material weight. In order to calculate the surcharge, the basic official price must be subtracted from the average price. The difference is then multiplied by the raw material
weight.
The basic official price can be found in the table below using the
number (1 to 9) of the respective digit of the metal factor. Your
Sales contact can inform you of the raw material weight.
Metal factor examples
––––––71
No basis necessary
No surcharge for silver
No surcharge for copper
No surcharge for aluminum
No surcharge for lead
No surcharge for gold
Dysprosium acc. to weight, basic official price
300 €
Neodym acc. to weight, basic official price 50 €
© Siemens AG 2015
Appendix
Metal surcharges
■ Values of the metal factor
Percentage
method
Basic official Step range
price
in €
in €
% surcharge
1st step
% surcharge
2nd step
% surcharge
3rd step
% surcharge
4th step
Price in €
Price in €
Price in €
Price in €
% surcharge
per additional step
150.01 - 200.00
200.01 - 250.00
250.01 - 300.00
300.01 - 350.00
A
150
50
0.1
0.2
0.3
0.4
0.1
B
150
50
0.2
0.4
0.6
0.8
0.2
C
150
50
0.3
0.6
0.9
1.2
0.3
D
150
50
0.4
0.8
1.2
1.6
0.4
E
150
50
0.5
1.0
1.5
2.0
0.5
F
150
50
0.6
1.2
1.8
2.4
0.6
G
150
50
1.0
2.0
3.0
4.0
1.0
H
150
50
1.2
2.4
3.6
4.8
1.2
I
150
50
1.6
3.2
4.8
6.4
1.6
J
150
50
1.8
3.6
5.4
7.2
1.8
175.01 - 225.00
225.01 - 275.00
275.01 - 325.00
325.01 - 375.00
O
175
50
0.1
0.2
0.3
0.4
0.1
P
175
50
0.2
0.4
0.6
0.8
0.2
R
175
50
0.5
1.0
1.5
2.0
0.5
225.01 - 275.00
275.01 - 325.00
325.01 - 375.00
375.01 - 425.00
S
225
50
0.2
0.4
0.6
0.8
0.2
U
225
50
1.0
2.0
3.0
4.0
1.0
V
225
50
1.0
1.5
2.0
3.0
1.0
W
225
50
1.0
Y
Z
150
400
25
25
1.2
2.5
3.5
4.5
150.01 - 175.00
175.01 - 200.00
200.01 - 225.00
225.01 - 250.00
0.3
0.6
0.9
1.2
400.01 - 425.00
425.01 - 450.00
450.01 - 475.00
475.01 - 500.00
0.1
0.2
0.3
0.4
0.3
0.1
Price basis (1st digit)
L
Calculation based on the list price
N
Calculation based on the customer net price (discounted list price)
Weight
method
Basic official price in €
1
50
2
100
3
150
4
175
5
200
6
225
7
300
8
400
9
555
Calculation based on raw material weight
Miscellaneous
-
No metal surcharge
6
Siemens D 81.1 P · 03/2015
6/15
© Siemens AG 2015
Appendix
Conditions of sale and delivery, Export regulations
■ 1. General Provisions
By using this catalog you can acquire hardware and software
products described therein from Siemens AG subject to the
following Terms and Conditions of Sale and Delivery (hereinafter
referred to as "T&C"). Please note that the scope, the quality and
the conditions for supplies and services, including software
products, by any Siemens entity having a registered office
outside Germany, shall be subject exclusively to the General
Terms and Conditions of the respective Siemens entity. The
following T&C apply exclusively for orders placed with Siemens
Aktiengesellschaft, Germany.
1.1 For customers with a seat or registered office in
Germany
For customers with a seat or registered office in Germany, the
following applies subordinate to the T&C:
• the "General Terms of Payment"1) and,
• for software products, the "General License Conditions for
Software Products for Automation and Drives for Customers
with a Seat or Registered Office in Germany"1) and,
• for other supplies and services, the "General Conditions for
the Supply of Products and Services of the Electrical and
Electronics Industry"1).
1.2 For customers with a seat or registered office outside
Germany
For customers with a seat or registered office outside Germany,
the following applies subordinate to the T&C:
• the "General Terms of Payment"1) and,
• for software products, the "General License Conditions for
Software Products for Automation and Drives for Customers
with a Seat or Registered Office outside of Germany"1) and
• for other supplies and/or services, the "General Conditions for
Supplies of Siemens Industry for Customers with a Seat or
Registered Office outside of Germany"1).
■ 2. Prices
6
The prices are in € (Euro) ex point of delivery, exclusive of
packaging.
The sales tax (value added tax) is not included in the prices. It
shall be charged separately at the respective rate according to
the applicable statutory legal regulations.
Prices are subject to change without prior notice. We will charge
the prices valid at the time of delivery.
To compensate for variations in the price of raw materials (e.g.
silver, copper, aluminum, lead, gold, dysprosium and neodym),
surcharges are calculated on a daily basis using the so-called
metal factor for products containing these raw materials. A
surcharge for the respective raw material is calculated as a
supplement to the price of a product if the basic official price of
the raw material in question is exceeded.
The metal factor of a product indicates the basic official price
(for those raw materials concerned) as of which the surcharges
on the price of the product are applied, and with what method of
calculation.
You will find a detailed explanation of the metal factor on the
page headed "Metal surcharges".
To calculate the surcharge (except in the cases of dysprosium
and neodym), the official price from the day prior to that on which
the order was received or the release order was effected is used.
To calculate the surcharge applicable to dysprosium and
neodym ("rare earths"), the corresponding three-month basic
average price in the quarter prior to that in which the order was
received or the release order was effected is used with a onemonth buffer (details on the calculation can be found in the
explanation of the metal factor).
6/16
Siemens D 81.1 P · 03/2015
■ 3. Additional Terms and Conditions
The dimensions are in mm. In Germany, according to the
German law on units in measuring technology, data in inches
apply only to devices for export.
Illustrations are not binding.
Insofar as there are no remarks on the individual pages of this
catalog - especially with regard to data, dimensions and weights
given - these are subject to change without prior notice.
■ 4. Export regulations
We shall not be obligated to fulfill any agreement if such
fulfillment is prevented by any impediments arising out of
national or international foreign trade or customs requirements
or any embargoes and/or other sanctions.
Export of goods listed in this catalog may be subject to licensing
requirements. We will indicate in the delivery details whether
licenses are required under German, European and US export
lists. Goods labeled with "AL" not equal to "N" are subject to
European or German export authorization when being exported
out of the EU. Goods labeled with "ECCN" not equal to "N" are
subject to US re-export authorization.
The export indications can be viewed in advance in the
description of the respective goods on the "Industry Mall", our
online catalog system. Only the export labels "AL" and "ECCN"
indicated on order confirmations, delivery notes and invoices
are authoritative.
Even without a label, or with label "AL:N" or "ECCN:N", authorization may be required i.a. due to the final disposition and
intended use of goods.
If you transfer goods (hardware and/or software and/or
technology as well as corresponding documentation, regardless
of the mode of provision) delivered by us or works and services
(including all kinds of technical support) performed by us to a
third party worldwide, you must comply with all applicable
national and international (re-)export control regulations.
If required for the purpose of conducting export control checks,
you (upon request by us) shall promptly provide us with all information pertaining to the particular end customer, final disposition and intended use of goods delivered by us respectively
works and services provided by us, as well as to any export
control restrictions existing in this relation.
The products listed in this catalog may be subject to
European/German and/or US export regulations. Any export
requiring approval is therefore subject to authorization by the
relevant authorities.
Errors excepted and subject to change without prior notice.
1)
The text of the Terms and Conditions of Siemens AG can be
downloaded at
www.siemens.com/automation/salesmaterial-as/catalog/en/
terms_of_trade_en.pdf
© Siemens AG 2015
Catalogs
Industry Automation, Drive Technologies and Low-Voltage Power Distribution
Further information can be obtained from our branch offices
listed at www.siemens.com/automation/partner
System Solutions for Industry
Interactive Catalog on DVD
Catalog
Products for Automation and Drives, Low-Voltage Power CA 01
Distribution and Electrical Installation Technology
Building Control
GAMMA Building Control
Drive Systems
SINAMICS G130 Drive Converter Chassis Units
SINAMICS G150 Drive Converter Cabinet Units
SINAMICS GM150, SINAMICS SM150
Medium-Voltage Converters
SINAMICS PERFECT HARMONY GH180
Medium-Voltage Air-Cooled Drives
Germany Edition
SINAMICS G180
Converters – Compact Units, Cabinet Systems,
Cabinet Units Air-Cooled and Liquid-Cooled
SINAMICS S120 Chassis Format Units and
Cabinet Modules
SINAMICS S150 Converter Cabinet Units
SINAMICS DCM DC Converter, Control Module
SINAMICS DCM Cabinet
SINAMICS Inverters for Single-Axis Drives and
SIMOTICS Motors
SINAMICS G120P and SINAMICS G120P Cabinet
pump, fan, compressor converters
Three-Phase Induction Motors SIMOTICS HV,
SIMOTICS TN
• Series H-compact
• Series H-compact PLUS
Asynchronous Motors Standardline
Synchronous Motors with Permanent-Magnet
Technology, HT-direct
DC Motors
SIMOREG DC MASTER 6RA70 Digital Chassis
Converters
SIMOREG K 6RA22 Analog Chassis Converters
Digital: SIMOREG DC MASTER 6RM70 Digital
Converter Cabinet Units
SIMOVERT PM Modular Converter Systems
SIEMOSYN Motors
MICROMASTER 420/430/440 Inverters
MICROMASTER 411/COMBIMASTER 411
SIMODRIVE 611 universal and POSMO
ET G1
D 11
D 12
D 15.1
D 18.1
SENTRON · SIVACON · ALPHA
Protection, Switching, Measuring and Monitoring
Devices, Switchboards and Distribution Systems
Standards-Compliant Components for
Photovoltaic Plants
Electrical Components for the Railway Industry
TÜV-certified Power Monitoring System
3WT Air Circuit Breakers up to 4000 A
3VT Molded Case Circuit Breakers up to 1600 A
Digital: SIVACON System Cubicles, System Lighting
and System Air-Conditioning
Digital: ALPHA Distribution Systems
ALPHA FIX Terminal Blocks
SIVACON S4 Power Distribution Boards
Digital: SIVACON 8PS Busbar Trunking Systems
Digital: DELTA Switches and Socket Outlets
LV 10
LV 11
LV 12
LV 14
LV 35
LV 36
LV 50
LV 51
LV 52
LV 56
LV 70
ET D1
D 86.1
D 86.2
Motion Control
SINUMERIK & SIMODRIVE
Automation Systems for Machine Tools
SINUMERIK & SINAMICS
Equipment for Machine Tools
SINUMERIK 840D sl Type 1B
Equipment for Machine Tools
SINUMERIK 808
Equipment for Machine Tools
SINUMERIK 828
Equipment for Machine Tools
SIMOTION, SINAMICS S120 & SIMOTICS
Equipment for Production Machines
Drive and Control Components for Cranes
DA 12
DA 21.1
Power Supply
Power supply SITOP
KT 10.1
Safety Integrated
Safety Technology for Factory Automation
SI 10
SIMATIC HMI/PC-based Automation
Human Machine Interface Systems/
PC-based Automation
ST 80/
ST PC
SIMATIC Ident
Industrial Identification Systems
ID 10
D 23.1
D 23.2
D 31
D 35
D 84.1
DA 21.2
DA 22
DA 45
DA 48
DA 51.2
DA 51.3
DA 65.4
Low-Voltage Three-Phase-Motors
SIMOTICS Low-Voltage Motors
SIMOTICS FD Flexible Duty Motors
LOHER Low-Voltage Motors
MOTOX Geared Motors
SIMOGEAR Geared Motors
SIMOGEAR Gearboxes with adapter
D 81.1
D 81.8
D 83.1
D 87.1
MD 50.1
MD 50.11
Mechanical Driving Machines
FLENDER Standard Couplings
FLENDER High Performance Couplings
FLENDER SIG Standard industrial gear units
FLENDER SIP Standard industrial planetary gear units
MD 10.1
MD 10.2
MD 30.1
MD 31.1
Digital: These catalogs are only available as a PDF.
Catalog
D 21.3
Note: Additional catalogs on SIMODRIVE or SINAMICS
drive systems and SIMOTICS motors with SINUMERIK
and SIMOTION can be found under Motion Control
Process Instrumentation and Analytics
Field Instruments for Process Automation
Digital: SIPART Controllers and Software
Products for Weighing Technology
Digital: Process Analytical Instruments
Digital: Process Analytics,
Components for the System Integration
Low-Voltage Power Distribution and
Electrical Installation Technology
FI 01
MP 31
WT 10
PA 01
PA 11
SIMATIC Industrial Automation Systems
Products for Totally Integrated Automation
SIMATIC PCS 7 Process Control System
System components
SIMATIC PCS 7 Process Control System
Technology components
Add-ons for the SIMATIC PCS 7
Process Control System
NC 60
NC 61
NC 62
NC 81.1
NC 82
PM 21
CR 1
ST 70
ST PCS 7
ST PCS 7 T
ST PCS 7 AO
SIMATIC NET
Industrial Communication
IK PI
SIRIUS Industrial Controls
SIRIUS Industrial Controls
IC 10
Information and Download Center
Digital versions of the catalogs are available on the Internet at:
www.siemens.com/industry/infocenter
There you’ll find additional catalogs in other languages.
Please note the section "Downloading catalogs" on page
"Online services" in the appendix of this catalog.
© Siemens AG 2015
Security information
Siemens provides products and solutions with
industrial security functions that support the
secure operation of plants, solutions, machines,
equipment and/or networks. They are important
components in a holistic industrial security
concept. With this in mind, Siemens’ products
and solutions undergo continuous development.
Siemens recommends strongly that you regularly
check for product updates.
For the secure operation of Siemens products
and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept)
and integrate each component into a holistic,
state-of-the-art industrial security concept. Thirdparty products that may be in use should also be
considered. For more information about industrial
security, visit
http://www.siemens.com/industrialsecurity.
To stay informed about product updates as they
occur, sign up for a product-specific newsletter.
For more information, visit
http://support.automation.siemens.com.
Get more information
Siemens Motors:
www.siemens.com/motors
Local partners worldwide:
www.siemens.com/automation/partner
Siemens AG
Process Industries and Drives
Postfach 4848
90026 Nürnberg
GERMANY
www.siemens.com/drives
Subject to change without prior notice
PDF (E86060-P5581-A111-B1-7600)
E.9115.33.LDT
KG 0315 HOF 266 En
Produced in Germany
© Siemens AG 2015
Please scan the
QR code for more
information on
Siemens Motors.
The information provided in this catalog contains merely general
descriptions or characteristics of performance which in case of actual
use do not always apply as described or which may change as a result
of further development of the products. An obligation to provide the
respective characteristics shall only exist if expressly agreed in the
terms of contract. Availability and technical specifications are subject
to change without notice.
All product designations may be trademarks or product names of
Siemens AG or supplier companies whose use by third parties for their
own purposes could violate the rights of the owners.