Pricing Guide for Horizontal Above NEMA Motors – Rev. 0 http://www.usa.siemens.com/motors Section Part Page Date 1 RevRec 1 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Revision Record Rev. No. Section Part Page Date 0 All All All 11/12 Description NEW All information in this guide is subject to change without notice. Rev. No. 0 Approved: (Joseph Moreland) Title Date Business Manager 11/01/2012 Section Part Page Date 1 General 1 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 General Information As one of the World’s leading provider of large motors with Global service and support second to none, Siemens sells and manufactures a complete line of motors at the ISO-9001 Certified Norwood, OH plant. This 350,000 square foot facility has produced over 150,000 high voltage motors continuously since 1898. The Norwood plant offers horizontal AC squirrel-cage induction motors through 18,000 horsepower and voltage ranges from 460 through 13200 volts. The plant also manufactures a complete line of vertical motors. Larger induction motors as well as wound rotor and synchronous motors are also available from other Siemens plants located in Germany. The following pages covers horizontal induction motors through 5000HP. It is intended for use in pricing the more common ratings, enclosures and modifications. Special features or applications which could affect frame size and, therefore seriously impact cost and price, should be referred to factory for price and availability. Ratings that fall outside those covered in this book, as well as all vertical motors, should also be referred to factory for pricing and availability. For additional information and updates of our products and services visit our website at www.usa.siemens.com/motors and click on the “Large AC Above NEMA motors” link. NOTE: This Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 supersedes all previous issues of the Pricing Guide for Horizontal Above NEMA Motors. Section Part Page Date 1 General 2 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 General Information All ratings in this price guide are designed for the following; Horizontal Mounting 3 phase Class F insulation Service factor of 1.0 Maximum temperature rise of 80 degrees C by resistance at 1.0 service factor Maximum 40 degrees C ambient Altitude of 3300 feet or less Direct connection to a typical centrifugal load with rated voltage and frequency applied at the motor terminals and a load inertia value equal to or less than NEMA value for the rating. Also, during accelerating period, connected load torque shall be equal to, or less than, a torque which varies as square of the speed and is equal to 100% of full-load torque at rated speed. Frame sizes are estimated and are subject to change without notice. Frame sizes may have a suffix or combination of suffixes dependent upon enclosure, bearings, and/or features; D = Flanged. Indicates that motor is to be supplied with a D-flanged bearing housing. S = Short shaft. Indicates motor is to be supplied with Siemens standard short shaft extension for direct connection except on 680 frame series where no suffix is used. Y = Special mounting. Indicates motor is to be supplied with non-standard mounting dimensions. Z = Special shaft. Indicates motor is to be supplied with non-standard or special shaft dimensions. No Suffix = Indicates that motor is to be supplied with a Siemens standard long shaft extension except on 680 & 800 frame series. The long shaft is provided if Belt Drive modification is made from the Modification & Accessories Section. Some 680 frame ratings can be supplied with grease lubricated ball bearings. Refer exact requirements to factory for price and availability. Lead Times will be per the latest issue of the Norwood Product Lead Times document ANMC- 70000-xxxx. Section Part Page Date 1 Encl 3 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Enclosures – Designed To Meet All Application And Environmental Needs Horizontal Drip Proof / Weather Protected I (Type CG) / IC01 / IP23 Meets or exceeds industry standards for NEMA WP-type machines. Best suited for indoor applications where not exposed to extreme ambient conditions. Available through 10,000 HP. Horizontal Drip Proof / Weather Protected II (Type CGII) / IC01 / IP24 Meets or exceeds industry standards for NEMA WPII-type machines. Specifically designed for outdoor applications where motor is not likely to be protected by other structures. Available through 18,000 HP. Totally Enclosed Fan Cooled (Type CZ, CGZ, 1LA4) / IC411 / IP54-IP55 Totally Enclosed Air-to-Air Cooled (Type CAZ) / IC611 / IP54 Designed for indoor and outdoor applications where internal parts must be protected from adverse ambient conditions. Utilizes cooling fins on all four quadrants of yoke and housings. Available through 3,000 HP. Designed for indoor and outdoor applications where internal parts must be protected from adverse ambient conditions. Utilizes air-to-air tube-type heat exchangers. Available through 14,000 HP. Section Part Page Date 1 Encl 4 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Enclosures – Designed To Meet All Application And Environmental Needs Totally Enclosed Water-to-Air Cooled (Type CGG) / ICW81 / IP54 Same critical design requirements as the air-to-air cooled machine with the added benefit of low noise and efficient water cooling. Available through 18,000 HP. Section Part Page Date 1 MRPD 5 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Machine Readable Product Description (MRPD) Structure Siemens Norwood AboveNEMA motors has adopted the Machine-Readable Product Designation structure (MRPD). These designations, which are very similar in structure to those used by many other Siemens Business Units, will provide a clear means of product designation. The benefits of adopting the MRPD codes include: 1) Consistent communication between regional organizations, field sales personnel and the business unit 2) Improved processes within Norwood 3) Enables smoother transition into product standardization 4) Provides a basis for product lead-times The MRPD structure is generated by two segments: 1) Product codes - 12 Alpha-numeric characters which define: Enclosure Frame-size Motor speed (Number of poles) Rotor construction Voltage / Frequency Type of construction (horizontal, vertical, flange-mounted, etc) 2) Option codes - Standard accessories The next several pages describe the Product Code structure for; Modular (ODP/WPI, WPII, TEAAC and TEWAC enclosures) machines. TEFC machines. In the Modifications and Accessories Section, you will find the Option Codes and Categories listed. It is important that these codes, both Product and Options, are clearly indicated on the orders. The Categories, explained in more detail later, are listed as the minimum category for the given option. The base motor category or other options with higher categories may impact the overall category of the motor. The highest category will dictate the applicable lead-time of the motor. Section Part Page Date 1 MRPD 6 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Machine Readable Product Description (MRPD) Structure 3 1RA 1RN 1RP 1RQ 1SC 1SG 1SL Sub Group (Enclosure-type & Hazardous Area) ODP / WPI (IP23 / IC01), Non-hazardous Areas TEWAC (IP54 / ICW81), Non-hazardous Areas WPII (IP24 / IC01), Non-hazardous Areas TEAAC (IP54 / IC611 or IC616), Non-hazardous Areas WPII (IP24 / IC01), Hazardous Areas (Division 2 or Zone 2) TEAAC (IP54 / IC611 or IC616), Hazardous Areas (Division 2 or Zone 2) TEWAC (IP54 / ICW81), Hazardous Areas (Division 2 or Zone 2) 4 2 5+6 50 58 68 80 11 Factory Specifics 2 = Norwood-built Frame-size 500 Frame 580 Frame 680 Frame 800 Frame 1120 Frame 7 E Reserved for Factory Use This position will contain letters for Norwood-built motors 8 2 4 6 8 3 5 7 9 Number of Poles 2 pole motor 4 pole motor 6 pole motor 8 pole motor 10 pole motor 12 pole motor 14 pole motor Refer to factory for slower speeds 9 Cooling Type ODP / WPI, WPII & TEWAC - Standard Internal Fan Design TEAAC = Use H Code for TEAACs with Auxiliary Blowers for Cooling (IC616) TEAAC = Use J Code for TEAACs with Shaft-Mounted External Fan (IC611) H J 10 Rotor Construction Motors without VFD (Line Supply Operation) B Aluminum Die-cast E Copper-bar 11 Voltage, frequency Medium / High Voltage Applications 0 3300 V, 50 hz 1 6600 V, 60 hz 2 13200 V, 60 hz 3 4160 V, 60 hz 4 4000 V, 60 hz 5 2300 V, 60 hz 6 6000 V, 50 hz 7 6600 V, 50 hz 8 10000 V, 50 hz 9 other voltage/frequency Motors used with VFD L Low Voltage Drive - Aluminum Rotor M Low Voltage Drive - Copper Rotor N Medium Voltage Drive - Aluminum Rotor V Medium Voltage Drive - Copper Rotor Low Voltage Applications 0 690 V, -1 460 V, 60 hz 2 575 V, 60 hz 3 380 V, 50 hz 4 415 V, 50 hz 5 500 V, -6 7 660 V, -8 9 other voltage/frequency 12 0 1 3 4 8 9 Mounting Horizontal, foot-mounted NEMA D-Flange, with feet Vertical, hollow shaft Vertical, solid shaft, with canopy Vertical, solid shaft, without canopy Other types of mounting (requires additional text) 13 Z Option Code Means that the motors will have additional options 5 6 6 8 7 E - 8 2 9 H 10 E 11 3 12 0 Options Main Group Identification Induction Motor (Modular - ODP/WPI, WPII, TEWAC or TEAAC) Induction Motor (Modular) - Hazardous Areas 4 2 Mounting 1+2 1R 1S 3 P Rotor Type Volts / Hz 2 R Cooling Type 1 1 Framesize # of Poles Data Position Example Sub Group Factory Reserved Main Group MODULAR - Z Z Section Part Page Date 1 MRPD 7 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Machine Readable Product Description (MRPD) Structure 6 8 7 E Su b Gro up (Enclosu re -type & Haz ar do us Ar ea ) TEF C, IP54, Basic Version TEAO - F orc ed-ventilated TEF C, IP54, Hazardous Area (Divis ion 2 or Zone 2) 4 2 F actor y Sp ecifics 2 = Norwood-built F ra m e-siz e SH 400 Frame SH 450 Frame 500 F ram e 580 F ram e 708 F ram e 780 F ram e 880 F ram e 7 E Re ser ved fo r Fa cto ry Use This pos ition will c ontain l etters for Norwood-built m otors 8 2 4 6 8 3 5 7 9 Nu m b er o f Po les 2 pole motor 4 pole motor 6 pole motor 8 pole motor 10 pole motor 12 pole motor 14 pole motor Refer to factory for slower speeds 9 L N Ro tor T yp e Alum inum die-c ast Copper-bar 10 A M N V L in e Su pp ly or VFD (LV o r MV ) Line-s upply; Low V oltage (<1000 V ) VF D; Low Voltage (<1000 V) Line-s upply; Medium Voltage (>1000 V) VF D; M edium Voltage (> 1000 V) 11 Vo lta ge , fre qu en cy Line s upply operation, MV / HV 0 3300 V, 50 hz 1 6600 V, 60 hz 2 2300 V, 60 hz 3 3000 V, 50 hz 4 4160 V, 60 hz 5 4000 V, 60 hz 6 6000 V, 50 hz 7 6600 V, 50 hz 9 other volt age/frequency MV drive converter operation 0 2.3k V, 50 hz 1 2.3 k V, 60 hz 2 3.3 k V, 50 hz 3 3.3 k V, 60 hz 4 4.16 k V, 50 hz 5 4.16 k V, 60 hz 12 0 1 9 M ou nting Horiz ontal, foot-mounted NE MA D-Flange, with feet O ther types of m ounting (requires addi tional tex t) 13 Z O p tion Cod e M eans that the motors will have additional options Line 0 1 2 5 7 9 s upply /drive c onverter operation, LV 690 V 460 V 575 V 500 V 660 V Other Voltages - 8 2 9 L 10 N 11 3 12 0 Options 5 5 Mounting 4 2 Line Supply or VFD Volts / Hz 3 A M ain Gro up Id en tificatio n Induction Motor (TE FC), N on-Haz ardous Area Induction Motor (TE FC), H az ardous Area (Div. or Zone 2) Induction Motor for s pecial appli cation (TEAO) 3 A Q S 5 + 6 40 45 50 58 70 78 88 2 L F ram es iz e Rotor Ty pe 1 + 2 1L 1M 1P 1 1 S ub Group F actory # of Poles Data Pos ition E xam ple Main Group Reserv ed T EF C (All fra m es e xc ept SH56 0) - Z Z Section Part Page Date 1 MRPD 8 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Machine Readable Product Description (MRPD) Structure 5 5 6 6 7 0 Up pe r an d M ain Gro up Id en ti fica tio n Induction Motor (TE FC-IP55), Non-H az ardous Area Induction Motor (TE FC-IP55), Haz ardous Area (Div. or Zone 2) Induction Motor for s pecial appli cation (TEAO) 3 A Q S L ow er G r ou p Squirrel-c age, bas ic version TEAO - F orc ed-ventilated TEF C Haz ardous Area (Divis ion 2 or Zone 2) 4 4 Se ries H-Com pac t II 5 + 6 56 Sh aft Heigh t SH 560 Frame 7 0 2 Co de fo r re lative le ng th of th e stato r core Short 4 Long M edium 6 Ex tra long 8 2 4 6 8 9 Nu m b er o f Po les 2 pole motor 4 pole motor 6 pole motor 8 pole motor Refer to factory for slower speeds 9 A C Ro tor T yp e Alum inum die-c ast Copper-bar 10 A M N V W L in e Su pp ly or VFD (LV o r MV ) Line-s upply; Low V oltage M asterdrives Line-s upply; High V oltage M V drive c onverters O ther drive c onverters 11 Vo lta ge , fre qu en cy Line s upply operation, MV / HV 0 3300 V, 50 hz 1 6600 V, 60 hz 3 3000 V, 50 hz 4 4160 V, 60 hz 5 4000 V, 60 hz 6 6000 V, 50 hz 7 6600 V, 50 hz 9 other volt age/frequency MV drive converter operation 0 2.3k V, 50 hz 1 2.3 k V, 60 hz 2 3.3 k V, 50 hz 3 3.3 k V, 60 hz 4 4.16 k V, 50 hz 5 4.16 k V, 60 hz 12 0 9 M ou nting Horiz ontal, foot-mounted O ther types of m ounting (requires addi tional tex t) 13 Z O p tion Cod e M eans that the motors will have additional options Line 0 1 2 5 7 9 s upply /drive c onverter operation, LV 690 V 460 V 575 V 500 V 660 V Other Voltages - 8 2 9 C 10 N 11 5 12 0 Options 4 4 Mounting 3 A Line Supply or VFD Volts / Hz 2 L F ram es iz e Rotor Ty pe 1 + 2 1L 1M 1P 1 1 S ub Group F actory # of Poles Data Pos ition E xam ple Main Group Reserv ed T EF C (SH5 60 F ra me On ly ) - Z Z Section Part Page Date 1 Index 9 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Index Section 1 Base List Prices, Frame, and Features Part Part Part Part Part Part Part Part Part Part Part Part Part 1234561A 2A 3A 4A 5A 6A 5B ODP Enclosure - 60 Hertz WPI Enclosure - 60 Hertz WPII Enclosure - 60 Hertz TEWAC Enclosure - 60 Hertz TEFC Enclosure - 60 Hertz TEAAC Enclosure - 60 Hertz - ODP Enclosure - 50 Hertz - WPI Enclosure - 50 Hertz - WPII Enclosure - 50 Hertz - TEWAC Enclosure – 50 Hertz - TEFC Enclosure - 50 Hertz - TEAAC Enclosure - 50 Hertz – TEFC Enclosure per IEEE 841 Std – 2009 Page 1-10 1-10 1-10 1-7 1-10 1-7 1-3 1-3 1-3 1-2 1-2 1-2 1-4 Section 2 Modifications & Accessories Adjustable Speed Drives Altitude Ambient API 541 – 3rd or 4 th Editions API 547 – 2005 Assembly Balance – Precision Balance for Low Vibration Balance – Special Bearings – Insulation Bearings – Lubrication Systems Bearings - Oil Sump Heaters Bearing Protective Devices – Mechanical Bearing Protective Devices – Temperature Bearings – Sleeve Belt Drive Applications Cancellation Charges Chipper/Crusher Drives Couplings Current Transformers Differential Pressure Switch Direction of Rotation 1 2 2 3 3-6 7 7 7 8 8 8 9 10-11 12 13 14 14 15 15 15 15 All information in this guide is subject to change without notice. Please contact your local Siemens sales representative for information or assistance with any ratings or modifications not found in this book or with any Siemens products. Section Part Page Date 1 Index 10 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Index Section 2 Modifications & Accessories - continued Efficiency – Higher Than Standard Export Packaging Fan - External Cooling Fan Housing Filters Flanges Freight Frequency - 50 Hertz Ground Pads Hardware Hazardous Location / Temperature Code IEEE 841 Inrush Current Insulation Load Inertia Noise Requirements Paint Systems Rotor Construction / Corrosion Protection Service Factor Shaft Extension Shaft Seal Shipment Terms & Packaging Software Packages Soleplates / Slide Rails / Shims Space Heaters Starting – Reduced Voltage/Soft Start Startup Assistance Stator - Connections Stator -Insulation/Treatments Stator - Protective Devices Terminal Boxes / Differential & Surge Protection / Current Transformers / Standoff Insulators Tests Torques – Non-Standard Voltages Warranty Offerings Page 15 16 16-17 17 18 18 18 18 19 19 19 19 19 20 20 21 22 22 23 23 23 24 24 24 25 25 25 25 26 26 27-28 29-30 31 31 31 All information in this guide is subject to change without notice. Please contact your local Siemens sales representative for information or assistance with any ratings or modifications not found in this book or with any Siemens products. Section 1 Part 1 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 60 Hertz Basic List Prices 460 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2506-2BA10 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2507-4BA10 $42,909 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BA10 508 588 $44,841 $55,192 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-8BA10 1RA2612-3BA10 460 588 $55,753 Alum. Diecast Ball - Grease Lube 460 460 588 588 $93,427 $93,427 3600 460 508 1800 460 508 250 250 1200 900 460 460 250 720 250 250 600 514 300 300 HP RPM Voltage Frame 200 3600 460 508 $45,956 200 1800 460 508 $41,605 200 1200 460 508 200 200 900 720 460 460 200 600 200 200 514 450 250 250 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2614-5BA10 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-7BD10 1RA2618-9BD10 $46,690 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2506-2BA10 $42,909 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BA10 508 508 $44,841 $47,127 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-6BA10 1RA2514-8BA10 460 588 $56,060 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BA10 460 460 588 588 $67,335 $96,326 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2616-5BA10 1RA2621-7BD10 3600 460 508 $46,540 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BA10 1800 460 508 $43,551 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BA10 300 300 1200 900 460 460 508 508 $47,127 $50,971 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2514-6BA10 1RA2518-8BA10 300 720 460 588 $59,271 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-3BA10 300 300 600 514 460 460 588 5810 $76,037 $102,098 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-5BA10 1RA2623-7BD10 350 3600 460 508 $47,260 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BA10 350 1800 460 508 $44,841 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-4BA10 350 350 1200 900 460 460 508 508 $49,053 $53,717 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2516-6BA10 1RA2521-8BA10 350 720 460 588 $67,335 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-3BA10 350 400 600 3600 460 460 5810 508 $84,710 $48,537 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2623-5BA10 1RA2511-2BA10 400 1800 460 508 $47,127 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BA10 400 1200 460 508 $49,787 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BA10 400 400 900 720 460 460 5010 588 $61,587 $76,037 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2525-8BA10 1RA2618-3BA10 400 600 460 5810 $96,421 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BA10 450 450 3600 1800 460 460 508 508 $49,288 $47,832 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2511-2BA10 1RA2514-4BA10 450 1200 460 5010 $58,389 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BA10 450 900 460 5010 $65,714 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2530-8BA10 450 450 720 600 460 460 588 5810 $78,939 $117,668 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2621-3BA10 1RA2627-5BD10 500 3600 460 508 $52,884 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BA10 500 500 1800 1200 460 460 508 5010 $49,053 $62,050 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2516-4BA10 1RA2525-6BA10 500 900 460 588 $76,037 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BA10 500 720 460 5810 $84,710 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-3BA10 500 600 460 5810 $119,489 Self Bi-directional CG 1RA2627-5BD10 Copper Bar Copper Bar Copper Bar Ball - Grease Lube Section 1 Part 1 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 60 Hertz Basic List Prices 460 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BA10 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BA10 $63,885 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-6BA10 588 5810 $78,939 $100,280 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2621-8BA10 1RA2627-3BA10 460 508 $57,244 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BA10 460 460 5010 588 $58,389 $76,037 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2521-4BA10 1RA2618-6BA10 900 460 5810 $96,421 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BA10 3600 460 5010 $65,665 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BA10 1800 1200 460 460 5010 588 $60,218 $78,939 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2523-4BA10 1RA2621-6BA10 900 460 5810 $100,280 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BA10 HP RPM Voltage Frame 600 3600 460 508 $53,703 600 1800 460 508 $50,971 600 1200 460 5010 600 600 900 720 460 460 700 3600 700 700 1800 1200 700 800 800 800 800 Std. Rotor Construction - Std. Bearings & Lubrication Section 1 Part 1 3 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 60 Hertz Basic List Prices 2300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB50 $43,820 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BB50 508 588 $45,749 $57,536 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-8BB50 1RA2612-3BB50 2300 588 $58,704 Alum. Diecast Ball - Grease Lube 2300 2300 588 6811 $97,262 $171,327 3600 2300 508 1800 2300 508 250 250 1200 900 2300 2300 250 720 250 250 600 514 250 300 300 300 HP RPM Voltage Frame 200 3600 2300 508 $47,491 200 1800 2300 508 $43,820 200 1200 2300 508 200 200 900 720 2300 2300 200 600 200 200 514 450 250 250 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2614-5BB50 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2621-7BE50 1RA2718-9BE50 $48,226 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50 $44,476 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB50 508 508 $45,749 $49,965 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-6BB50 1RA2516-8BB50 2300 588 $58,440 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BB50 2300 2300 588 5810 $77,570 $103,976 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-5BB50 1RA2623-7BE50 450 2300 6811 $174,038 Self Bi-directional CG 1RA2718-9BE50 3600 2300 508 $48,984 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50 1800 1200 2300 2300 508 508 $45,749 $48,035 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-4BB50 1RA2514-6BB50 300 900 2300 508 $54,637 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-8BB50 300 300 720 600 2300 2300 588 588 $61,125 $79,875 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2614-3BB50 1RA2621-5BB50 300 514 2300 5810 $117,780 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-7BE50 300 450 2300 6811 $176,836 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE50 350 350 3600 1800 2300 2300 508 508 $49,767 $48,035 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2508-2BB50 1RA2514-4BB50 350 1200 2300 508 $49,965 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB50 350 350 900 720 2300 2300 5010 588 $64,799 $69,402 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2527-8BB50 1RA2616-3BB50 350 600 2300 5810 $86,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-5BB50 350 514 2300 6811 $171,327 Self Bi-directional CG 1RA2718-7BE50 350 400 450 3600 2300 2300 6811 508 $180,664 $50,662 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2721-9BE50 1RA2511-2BB50 400 1800 2300 508 $48,754 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB50 400 400 1200 900 2300 2300 508 5010 $51,894 $66,634 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-6BB50 1RA2530-8BB50 400 720 2300 588 $77,570 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-3BB50 400 600 2300 5810 $96,814 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BB50 400 400 514 450 2300 2300 6811 6811 $177,763 $183,522 Self Self Bi-directional Bi-directional CG CG 1RA2721-7BE50 1RA2721-9BE50 Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Section 1 Part 1 4 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 60 Hertz Basic List Prices 2300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB50 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB50 $59,307 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BB50 588 588 $77,570 $79,875 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-8BB50 1RA2621-3BB50 2300 5810 $117,780 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BE50 2300 2300 6811 6811 $180,576 $190,617 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2721-7BE50 1RA2725-9BE50 3600 2300 508 $52,255 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB50 1800 2300 508 $50,713 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB50 500 500 1200 900 2300 2300 5010 588 $62,782 $79,875 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2525-6BB50 1RA2621-8BB50 500 720 2300 5810 $86,588 Alum. Diecast Ball - Grease Lube 500 500 600 514 2300 2300 6811 6811 $171,327 $190,617 500 450 2300 6811 $197,047 600 3600 2300 508 $53,832 Alum. Diecast Ball - Grease Lube 600 600 1800 1200 2300 2300 508 5010 $51,894 $64,799 600 900 2300 5810 600 600 720 600 2300 2300 5810 6811 600 514 2300 6811 $201,748 Copper Bar 600 450 2300 6811 $208,181 Copper Bar 700 700 3600 1800 2300 2300 508 5010 $54,666 $60,985 700 1200 2300 588 700 700 900 720 2300 2300 5810 6811 700 600 2300 6811 $184,190 Copper Bar 700 514 2300 6813 $228,003 Copper Bar 700 800 450 3600 2300 2300 6813 508 $253,720 $58,186 800 1800 2300 5010 800 800 1200 900 2300 2300 588 5810 800 720 2300 6811 $190,617 Copper Bar 800 600 2300 6811 $197,047 Copper Bar 800 900 514 3600 2300 2300 6813 5010 $247,287 $66,610 900 1800 2300 5010 900 900 1200 900 2300 2300 5810 5812 900 720 2300 6811 $193,633 Copper Bar 900 600 2300 6811 $201,748 Copper Bar 900 514 2300 6813 $253,720 Copper Bar HP RPM Voltage Frame 450 3600 2300 508 $51,446 450 1800 2300 508 $49,965 450 1200 2300 5010 450 450 900 720 2300 2300 450 600 450 450 514 450 500 500 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2623-3BB50 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2718-5BE50 1RA2725-7BE50 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-9BE50 Self Uni-directional CG 1RA2513-2BB50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-4BB50 1RA2527-6BB50 $96,814 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB50 $100,393 $177,763 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2627-3BB50 1RA2721-5BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2730-7BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2732-9BE50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2513-2BB50 1RA2523-4BB50 $79,875 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB50 $100,393 $177,763 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2627-8BB50 1RA2721-3BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2723-5BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2734-7BE50 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2743-9BE50 1RA2515-2BB50 $64,799 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB50 $81,111 $117,780 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2621-6BB50 1RA2627-8BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE50 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2741-7BE50 1RA2516-2BB50 $65,769 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB50 $86,588 $133,445 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2623-6BB50 1RA2632-8BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2730-5BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2743-7BE50 Section 1 Part 1 5 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 60 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 2300 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD 1000 3600 2300 5010 $69,790 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB50 1000 1800 2300 5810 $82,549 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB50 1000 1200 2300 5810 $117,780 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-6BE50 1000 1000 900 720 2300 2300 5812 6811 $144,463 $197,047 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2636-8BE50 1RA2727-3BE50 1000 600 2300 6813 $234,436 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE50 1250 1250 3600 1800 2300 2300 5010 5810 $76,125 $96,814 Self Self Uni-directional Bi-directional CG CG 1RA2523-2BB50 1RA2625-4BB50 1250 1200 2300 5812 $133,445 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE50 1250 900 2300 6811 $182,464 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE50 1250 1250 720 600 2300 2300 6813 6813 $228,003 $253,720 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2734-3BE50 1RA2743-5BE50 1500 3600 2300 5810 $94,249 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB50 1500 1500 1800 1200 2300 2300 5810 5812 $100,393 $144,463 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2627-4BB50 1RA2636-6BE50 1500 900 2300 6811 $195,327 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE50 1500 720 2300 6813 $247,287 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-3BE50 1750 1750 3600 1800 2300 2300 5810 5812 $95,741 $113,759 Self Self Uni-directional Bi-directional CG CG 1RA2623-2BB50 1RA2632-4BB50 1750 1200 2300 6811 $195,327 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-6BE50 1750 1750 900 720 2300 2300 6813 6813 $228,003 $253,720 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2736-8BE50 1RA2743-3BE50 2000 3600 2300 5810 $105,427 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2623-2BB50 2000 1800 2300 5812 $144,095 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-4BE50 2000 2000 1200 900 2300 2300 6813 6813 $221,579 $240,863 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2734-6BE50 1RA2741-8BE50 2250 3600 2300 5812 $125,783 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2627-2BB50 2250 2250 1800 1200 2300 2300 6811 6813 $175,617 $234,436 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2725-4BE50 1RA2738-6BE50 2500 3600 2300 5812 $134,029 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB50 2500 1800 2300 6811 $180,439 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE50 2500 3000 1200 3600 2300 2300 6813 6811 $240,863 $183,920 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CG CG 1RA2741-6BE50 1RA2723-2BE50 3000 1800 2300 6813 $203,978 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-4BE50 3500 3500 3600 1800 2300 2300 6813 6813 $210,856 $216,832 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CG CG 1RA2727-2BE50 1RA2736-4BE50 4000 3600 2300 6813 $217,454 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2730-2BE50 4000 1800 2300 6813 $229,695 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE50 4500 5000 3600 3600 2300 2300 6813 6813 $224,054 $230,661 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CG CG 1RA2732-2BE50 1RA2734-2BE50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 1 6 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 60 Hertz Basic List Prices 4000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB40 $45,201 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BB40 $49,413 $58,796 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2514-8BB40 1RA2612-3BB40 588 $70,470 Alum. Diecast Ball - Grease Lube 5810 6811 $104,595 $172,349 HP RPM Voltage Frame 200 3600 4000 508 $48,912 200 1800 4000 508 $45,201 200 1200 4000 508 200 200 900 720 4000 4000 508 588 200 600 4000 200 200 514 450 4000 4000 250 3600 4000 508 250 1800 4000 508 250 250 1200 900 4000 4000 250 720 250 250 600 514 250 300 300 300 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2616-5BB40 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2623-7BE40 1RA2718-9BE40 $49,669 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40 $45,877 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB40 508 508 $47,127 $53,265 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-6BB40 1RA2518-8BB40 4000 588 $62,131 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-3BB40 4000 4000 588 5810 $78,881 $106,214 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-5BB40 1RA2623-7BE40 450 4000 6811 $175,076 Self Bi-directional CG 1RA2718-9BE40 3600 4000 508 $50,450 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40 1800 1200 4000 4000 508 508 $47,127 $49,413 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-4BB40 1RA2514-6BB40 300 900 4000 5010 $62,363 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-8BB40 300 300 720 600 4000 4000 588 588 $70,470 $81,991 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2616-3BB40 1RA2621-5BB40 300 514 4000 6811 $172,349 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-7BE40 300 450 4000 6811 $178,782 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-9BE40 350 350 3600 1800 4000 4000 508 508 $51,256 $49,413 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2508-2BB40 1RA2514-4BB40 350 1200 4000 508 $51,345 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB40 350 350 900 720 4000 4000 5010 588 $66,171 $78,881 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2527-8BB40 1RA2618-3BB40 350 600 4000 5810 $87,207 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-5BB40 350 514 4000 6811 $178,782 Self Bi-directional CG 1RA2721-7BE40 350 400 450 3600 4000 4000 6811 508 $181,611 $52,082 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2721-9BE40 1RA2511-2BB40 400 1800 4000 508 $50,153 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB40 400 400 1200 900 4000 4000 508 5010 $53,265 $82,029 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-6BB40 1RA2530-8BE40 400 720 4000 588 $81,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-3BB40 400 600 4000 5810 $98,921 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BB40 400 400 514 450 4000 4000 6811 6811 $181,611 $185,209 Self Self Bi-directional Bi-directional CG CG 1RA2721-7BE40 1RA2723-9BE40 Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Section 1 Part 1 7 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 60 Hertz Basic List Prices 4000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB40 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB40 $60,676 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BB40 588 5810 $78,881 $87,207 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-8BB40 1RA2623-3BB40 4000 5810 $119,003 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BE40 4000 4000 6811 6811 $185,209 $198,069 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2723-7BE40 1RA2727-9BE40 3600 4000 508 $53,720 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB40 1800 4000 508 $52,114 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB40 500 500 1200 900 4000 4000 5010 588 $64,342 $81,991 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2525-6BB40 1RA2621-8BB40 500 720 4000 5810 $101,616 Alum. Diecast Ball - Grease Lube 500 500 600 514 4000 4000 6811 6811 $178,782 $191,642 500 450 4000 6811 $202,763 600 3600 4000 508 $55,256 Alum. Diecast Ball - Grease Lube 600 600 1800 1200 4000 4000 508 5010 $53,265 $66,171 600 900 4000 5810 $98,921 600 600 720 600 4000 4000 6811 6811 $172,349 $181,611 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube 600 514 4000 6811 $202,763 Copper Bar 600 450 4000 6813 $237,701 Copper Bar 700 700 3600 1800 4000 4000 508 5010 $56,111 $62,363 700 1200 4000 588 700 700 900 720 4000 4000 5810 6811 700 600 4000 6811 $185,209 Copper Bar 700 514 4000 6813 $231,274 Copper Bar 700 800 450 3600 4000 4000 6813 508 $256,988 $59,604 800 1800 4000 5010 800 800 1200 900 4000 4000 5810 5810 800 720 4000 6811 $191,642 Copper Bar 800 600 4000 6811 $198,069 Copper Bar 800 900 514 3600 4000 4000 6813 5010 $250,561 $68,027 900 1800 4000 5010 900 900 1200 900 4000 4000 5810 5812 900 720 4000 6811 $198,069 Copper Bar 900 600 4000 6811 $202,763 Copper Bar HP RPM Voltage Frame 450 3600 4000 508 $52,889 450 1800 4000 508 $51,345 450 1200 4000 5010 450 450 900 720 4000 4000 450 600 450 450 514 450 500 500 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2627-3BB40 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2721-5BE40 1RA2725-7BE40 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-9BE40 Self Uni-directional CG 1RA2513-2BB40 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-4BB40 1RA2527-6BB40 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB40 Self Self Bi-directional Bi-directional CG CG 1RA2718-3BE40 1RA2721-5BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2730-7BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2736-9BE40 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2513-2BB40 1RA2523-4BB40 $81,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB40 $101,616 $178,782 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2627-8BB40 1RA2721-3BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2723-5BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2734-7BE40 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2743-9BE40 1RA2515-2BB40 $66,171 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB40 $87,207 $119,003 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2623-6BB40 1RA2627-8BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE40 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2741-7BE40 1RA2516-2BB40 $67,162 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB40 $98,921 $134,671 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2625-6BB40 1RA2632-8BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2727-3BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2730-5BE40 Section 1 Part 1 8 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 60 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 4000 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD 1000 3600 4000 5010 $71,201 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB40 1000 1800 4000 5810 $83,701 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB40 1000 1200 4000 5810 $119,003 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-6BE40 1000 1000 900 720 4000 4000 5812 6811 $145,686 $202,763 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2636-8BE40 1RA2730-3BE40 1000 600 4000 6813 $237,701 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE40 1250 1250 3600 1800 4000 4000 5010 5810 $77,546 $98,921 Self Self Uni-directional Bi-directional CG CG 1RA2523-2BB40 1RA2625-4BB40 1250 1200 4000 5812 $134,671 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE40 1250 900 4000 6811 $183,474 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE40 1250 1250 720 600 4000 4000 6813 6813 $237,701 $256,988 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2736-3BE40 1RA2743-5BE40 1500 3600 4000 5810 $97,212 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB40 1500 1500 1800 1200 4000 4000 5810 5812 $101,616 $145,686 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2627-4BB40 1RA2636-6BE40 1500 900 4000 6811 $196,336 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE40 1500 720 4000 6813 $256,988 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE40 1750 1750 3600 1800 4000 4000 5810 5812 $98,750 $121,098 Self Self Uni-directional Bi-directional CG CG 1RA2623-2BB40 1RA2634-4BB40 1750 1200 4000 6811 $196,336 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-6BE40 1750 1750 900 720 4000 4000 6813 6813 $231,274 $261,054 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2736-8BE40 1RA2743-3BE40 2000 3600 4000 5810 $108,485 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2623-2BB40 2000 1800 4000 5812 $145,320 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-4BE40 2000 2000 1200 900 4000 4000 6813 6813 $224,847 $244,137 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2734-6BE40 1RA2741-8BE40 2250 3600 4000 5812 $138,322 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB40 2250 2250 1800 1200 4000 4000 6811 6813 $176,636 $237,701 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2725-4BE40 1RA2738-6BE40 2500 3600 4000 5812 $140,382 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB40 2500 1800 4000 6811 $181,464 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE40 2500 3000 1200 3600 4000 4000 6813 6811 $244,137 $184,955 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CG CG 1RA2741-6BE40 1RA2723-2BE40 3000 1800 4000 6813 $207,249 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-4BE40 3500 3500 3600 1800 4000 4000 6813 6813 $214,220 $220,109 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CG CG 1RA2727-2BE40 1RA2736-4BE40 4000 3600 4000 6813 $220,815 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2730-2BE40 4000 1800 4000 6813 $232,960 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE40 4500 5000 3600 3600 4000 4000 6813 6813 $227,415 $234,019 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CG CG 1RA2732-2BE40 1RA2734-2BE40 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 1 9 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 60 Hertz Basic List Prices 6600 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB10 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB10 $84,262 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10 588 6811 $81,152 $175,617 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-8BB10 1RA2718-3BE10 6600 6811 $175,617 Self Bi-directional CG 1RA2718-5BE10 6600 6600 508 508 $55,159 $55,463 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2511-2BB10 1RA2516-4BB10 1200 6600 588 $85,567 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10 900 6600 588 $82,409 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB10 400 400 720 600 6600 6600 6811 6811 $178,396 $182,047 Self Self Bi-directional Bi-directional CG CG 1RA2718-3BE10 1RA2721-5BE10 450 3600 6600 508 $56,012 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB10 450 450 1800 1200 6600 6600 5010 588 $62,581 $86,912 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-4BB10 1RA2621-6BB10 450 900 6600 588 $84,262 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB10 450 720 6600 6811 $182,047 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10 450 450 600 514 6600 6600 6811 6811 $184,927 $201,336 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2721-5BE10 1RA2727-7BE10 500 3600 6600 508 $59,518 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB10 500 500 1800 1200 6600 6600 5010 588 $64,799 $88,300 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2521-4BB10 1RA2621-6BB10 500 900 6600 5810 $106,515 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BB10 500 720 6600 6811 $184,927 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10 500 500 600 514 6600 6600 6811 6811 $188,477 $206,037 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2723-5BE10 1RA2730-7BE10 600 3600 6600 5010 $69,247 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB10 600 600 1800 1200 6600 6600 5010 5810 $66,481 $101,735 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2523-4BB10 1RA2625-6BB10 600 900 6600 5810 $123,902 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-8BE10 600 720 6600 6811 $187,900 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10 600 600 600 514 6600 6600 6811 6813 $201,336 $240,975 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2727-5BE10 1RA2736-7BE10 700 3600 6600 5010 $70,319 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB10 700 700 1800 1200 6600 6600 5010 5810 $68,460 $119,122 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2525-4BB10 1RA2625-6BE10 700 900 6600 5812 $133,445 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-8BE10 700 720 6600 6811 $194,903 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE10 700 700 600 514 6600 6600 6811 6813 $204,522 $253,832 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2727-5BE10 1RA2741-7BE10 800 3600 6600 5010 $75,463 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB10 800 800 1800 1200 6600 6600 588 5812 $81,152 $133,445 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-4BB10 1RA2630-6BE10 800 900 6600 5812 $139,561 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-8BE10 800 720 6600 6811 $197,987 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE10 800 600 6600 6811 $212,467 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-5BE10 HP RPM Voltage Frame 300 1800 6600 508 $53,537 350 1800 6600 508 $54,338 350 1200 6600 588 350 350 900 720 6600 6600 350 600 400 400 3600 1800 400 400 Std. Rotor Construction - Copper Bar Copper Bar Copper Bar Std. Bearings & Lubrication Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Section 1 Part 1 10 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 6600 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB10 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB10 Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE10 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2723-8BE10 1RA2730-3BE10 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE10 Self Self Uni-directional Bi-directional CG CG 1RA2518-2BB10 1RA2623-4BB10 HP RPM Voltage Frame 900 3600 6600 5010 $76,632 900 1800 6600 5810 $86,509 900 1200 6600 5812 $139,561 Copper Bar 900 900 900 720 6600 6600 6811 6811 $180,321 $206,037 Std. Bearings & Lubrication 900 600 6600 6813 $240,975 1000 1000 3600 1800 6600 6600 5010 5810 $77,836 $90,037 1000 1200 6600 5812 $145,686 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-6BE10 1000 900 6600 6811 $186,751 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE10 1000 1000 720 600 6600 6600 6813 6813 $234,542 $253,832 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2734-3BE10 1RA2741-5BE10 1250 3600 6600 5810 $98,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2621-2BB10 1250 1250 1800 1200 6600 6600 5810 6811 $101,735 $186,751 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2625-4BB10 1RA2725-6BE10 1250 900 6600 6811 $199,607 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE10 1250 720 6600 6813 $260,259 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE10 1500 1500 3600 1800 6600 6600 5810 5812 $106,854 $126,000 Self Self Uni-directional Bi-directional CG CG 1RA2623-2BB10 1RA2634-4BB10 1500 1200 6600 6811 $199,607 Self Bi-directional CG 1RA2730-6BE10 1500 1750 900 3600 6600 6600 6813 5810 $234,542 $108,544 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2736-8BE10 1RA2623-2BB10 1750 1800 6600 5812 $127,950 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2634-4BB10 1750 1200 6600 6813 $228,118 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-6BE10 1750 2000 900 3600 6600 6600 6813 5812 $247,405 $138,322 Copper Bar Alum. Diecast Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CG CG 1RA2741-8BE10 1RA2630-2BB10 2000 1800 6600 6811 $184,729 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE10 2000 2250 1200 3600 6600 6600 6813 5812 $240,975 $144,590 Copper Bar Alum. Diecast Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CG CG 1RA2738-6BE10 1RA2632-2BB10 2250 1800 6600 6811 $196,729 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-4BE10 2250 1200 6600 6813 $247,405 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-6BE10 2500 2500 3600 1800 6600 6600 6811 6813 $188,319 $216,950 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CG CG 1RA2723-2BE10 1RA2734-4BE10 3000 3600 6600 6813 $194,476 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2725-2BE10 3000 3500 1800 3600 6600 6600 6813 6813 $229,810 $224,185 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CG CG 1RA2738-4BE10 1RA2730-2BE10 3500 1800 6600 6813 $236,240 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE10 4000 3600 6600 6813 $237,377 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2734-2BE10 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 2 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 60 Hertz Basic List Prices 460 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2506-2BA10 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2507-4BA10 $43,599 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BA10 508 588 $45,531 $56,690 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-8BA10 1RA2612-3BA10 460 588 $57,229 Alum. Diecast Ball - Grease Lube 460 460 588 588 $94,902 $94,902 3600 460 508 1800 460 508 250 250 1200 900 460 460 250 720 250 250 600 514 300 300 HP RPM Voltage Frame 200 3600 460 508 $46,692 200 1800 460 508 $42,305 200 1200 460 508 200 200 900 720 460 460 200 600 200 200 514 450 250 250 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2614-5BA10 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-7BD10 1RA2618-9BD10 $47,438 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2506-2BA10 $43,599 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BA10 508 508 $45,531 $47,817 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-6BA10 1RA2514-8BA10 460 588 $57,582 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BA10 460 460 588 588 $68,811 $97,802 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2616-5BA10 1RA2621-7BD10 3600 460 508 $47,253 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BA10 1800 460 508 $44,251 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BA10 300 300 1200 900 460 460 508 508 $47,817 $51,661 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2514-6BA10 1RA2518-8BA10 300 720 460 588 $60,747 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-3BA10 300 300 600 514 460 460 588 5810 $77,512 $103,573 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-5BA10 1RA2623-7BD10 350 3600 460 508 $47,985 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BA10 350 1800 460 508 $45,531 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-4BA10 350 350 1200 900 460 460 508 508 $49,743 $54,407 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2516-6BA10 1RA2521-8BA10 350 720 460 588 $68,811 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-3BA10 350 400 600 3600 460 460 5810 508 $86,186 $49,250 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2623-5BA10 1RA2511-2BA10 400 1800 460 508 $47,817 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BA10 400 1200 460 508 $50,488 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BA10 400 400 900 720 460 460 5010 588 $62,277 $77,512 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2525-8BA10 1RA2618-3BA10 400 600 460 5810 $97,896 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BA10 450 450 3600 1800 460 460 508 508 $50,012 $48,533 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2511-2BA10 1RA2514-4BA10 450 1200 460 5010 $59,080 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BA10 450 900 460 5010 $66,404 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2530-8BA10 450 450 720 600 460 460 588 5810 $80,415 $119,143 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2621-3BA10 1RA2627-5BD10 500 3600 460 508 $53,598 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BA10 500 500 1800 1200 460 460 508 5010 $49,743 $62,740 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2516-4BA10 1RA2525-6BA10 500 900 460 588 $77,512 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BA10 500 720 460 5810 $86,186 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-3BA10 500 600 460 5810 $120,988 Self Bi-directional CG 1RA2627-5BD10 Copper Bar Copper Bar Copper Bar Ball - Grease Lube Section 1 Part 2 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 60 Hertz Basic List Prices 460 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BA10 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BA10 $64,575 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-6BA10 588 5810 $80,415 $101,756 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2621-8BA10 1RA2627-3BA10 460 508 $57,957 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BA10 460 460 5010 588 $59,080 $77,512 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2521-4BA10 1RA2618-6BA10 900 460 5810 $97,896 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BA10 3600 460 5010 $66,378 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BA10 1800 1200 460 460 5010 588 $60,909 $80,415 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2523-4BA10 1RA2621-6BA10 900 460 5810 $101,756 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BA10 HP RPM Voltage Frame 600 3600 460 508 $54,427 600 1800 460 508 $51,661 600 1200 460 5010 600 600 900 720 460 460 700 3600 700 700 1800 1200 700 800 800 800 800 Std. Rotor Construction - Std. Bearings & Lubrication Section 1 Part 2 3 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 60 Hertz Basic List Prices 2300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB50 $44,510 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BB50 508 588 $46,440 $59,034 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-8BB50 1RA2612-3BB50 2300 588 $60,180 Alum. Diecast Ball - Grease Lube 2300 2300 588 6811 $98,738 $174,860 3600 2300 508 1800 2300 508 250 250 1200 900 2300 2300 250 720 250 250 600 514 250 300 300 300 HP RPM Voltage Frame 200 3600 2300 508 $48,204 200 1800 2300 508 $44,510 200 1200 2300 508 200 200 900 720 2300 2300 200 600 200 200 514 450 250 250 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2614-5BB50 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2621-7BE50 1RA2718-9BE50 $48,950 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50 $45,177 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB50 508 508 $46,440 $50,655 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-6BB50 1RA2516-8BB50 2300 588 $59,962 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BB50 2300 2300 588 5810 $79,046 $105,451 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-5BB50 1RA2623-7BE50 450 2300 6811 $177,627 Self Bi-directional CG 1RA2718-9BE50 3600 2300 508 $49,720 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50 1800 1200 2300 2300 508 508 $46,440 $48,726 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-4BB50 1RA2514-6BB50 300 900 2300 508 $55,327 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-8BB50 300 300 720 600 2300 2300 588 588 $62,601 $81,351 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2614-3BB50 1RA2621-5BB50 300 514 2300 5810 $119,256 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-7BE50 300 450 2300 6811 $180,482 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE50 350 350 3600 1800 2300 2300 508 508 $50,514 $48,726 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2508-2BB50 1RA2514-4BB50 350 1200 2300 508 $50,655 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB50 350 350 900 720 2300 2300 5010 588 $65,490 $70,878 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2527-8BB50 1RA2616-3BB50 350 600 2300 5810 $88,064 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-5BB50 350 514 2300 6811 $174,860 Self Bi-directional CG 1RA2718-7BE50 350 400 450 3600 2300 2300 6811 508 $184,196 $51,375 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2721-9BE50 1RA2511-2BB50 400 1800 2300 508 $49,455 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB50 400 400 1200 900 2300 2300 508 5010 $52,584 $67,324 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-6BB50 1RA2530-8BB50 400 720 2300 588 $79,046 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-3BB50 400 600 2300 5810 $98,290 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BB50 400 400 514 450 2300 2300 6811 6811 $181,296 $187,111 Self Self Bi-directional Bi-directional CG CG 1RA2721-7BE50 1RA2721-9BE50 Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Section 1 Part 2 4 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 60 Hertz Basic List Prices 2300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB50 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB50 $59,997 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BB50 588 588 $79,046 $81,351 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-8BB50 1RA2621-3BB50 2300 5810 $119,256 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BE50 2300 2300 6811 6811 $184,165 $194,150 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2721-7BE50 1RA2725-9BE50 3600 2300 508 $52,991 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB50 1800 2300 508 $51,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB50 500 500 1200 900 2300 2300 5010 588 $63,472 $81,351 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2525-6BB50 1RA2621-8BB50 500 720 2300 5810 $88,064 Alum. Diecast Ball - Grease Lube 500 500 600 514 2300 2300 6811 6811 $174,860 $194,150 500 450 2300 6811 $200,579 600 3600 2300 508 $54,546 Alum. Diecast Ball - Grease Lube 600 600 1800 1200 2300 2300 508 5010 $52,584 $65,490 600 900 2300 5810 600 600 720 600 2300 2300 5810 6811 600 514 2300 6811 $205,280 Copper Bar 600 450 2300 6811 $211,713 Copper Bar 700 700 3600 1800 2300 2300 508 5010 $55,390 $61,676 700 1200 2300 588 700 700 900 720 2300 2300 5810 6811 700 600 2300 6811 $187,723 Copper Bar 700 514 2300 6813 $231,536 Copper Bar 700 800 450 3600 2300 2300 6813 508 $257,252 $58,899 800 1800 2300 5010 800 800 1200 900 2300 2300 588 5810 800 720 2300 6811 $194,150 Copper Bar 800 600 2300 6811 $200,579 Copper Bar 800 900 514 3600 2300 2300 6813 5010 $250,819 $67,323 900 1800 2300 5010 900 900 1200 900 2300 2300 5810 5812 900 720 2300 6811 $197,222 Copper Bar 900 600 2300 6811 $205,280 Copper Bar 900 514 2300 6813 $257,252 Copper Bar HP RPM Voltage Frame 450 3600 2300 508 $52,170 450 1800 2300 508 $50,655 450 1200 2300 5010 450 450 900 720 2300 2300 450 600 450 450 514 450 500 500 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2623-3BB50 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2718-5BE50 1RA2725-7BE50 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-9BE50 Self Uni-directional CG 1RA2513-2BB50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-4BB50 1RA2527-6BB50 $98,290 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB50 $101,869 $181,296 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2627-3BB50 1RA2721-5BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2730-7BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2732-9BE50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2513-2BB50 1RA2523-4BB50 $81,351 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB50 $101,869 $181,296 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2627-8BB50 1RA2721-3BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2723-5BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2734-7BE50 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2743-9BE50 1RA2515-2BB50 $65,490 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB50 $82,610 $119,256 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2621-6BB50 1RA2627-8BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE50 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2741-7BE50 1RA2516-2BB50 $66,470 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB50 $88,064 $134,921 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2623-6BB50 1RA2632-8BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2730-5BE50 Sleeve - Oil Lube Self Bi-directional CG 1RA2743-7BE50 Section 1 Part 2 5 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 60 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 2300 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD 1000 3600 2300 5010 $70,503 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB50 1000 1800 2300 5810 $84,024 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB50 1000 1200 2300 5810 $119,256 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-6BE50 1000 1000 900 720 2300 2300 5812 6811 $145,939 $200,579 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2636-8BE50 1RA2727-3BE50 1000 600 2300 6813 $237,969 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE50 1250 1250 3600 1800 2300 2300 5010 5810 $76,838 $98,290 Self Self Uni-directional Bi-directional CG CG 1RA2523-2BB50 1RA2625-4BB50 1250 1200 2300 5812 $134,921 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE50 1250 900 2300 6811 $185,997 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE50 1250 1250 720 600 2300 2300 6813 6813 $231,536 $257,252 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2734-3BE50 1RA2743-5BE50 1500 3600 2300 5810 $95,757 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB50 1500 1500 1800 1200 2300 2300 5810 5812 $101,869 $145,939 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2627-4BB50 1RA2636-6BE50 1500 900 2300 6811 $198,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE50 1500 720 2300 6813 $250,819 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-3BE50 1750 1750 3600 1800 2300 2300 5810 5812 $97,272 $115,235 Self Self Uni-directional Bi-directional CG CG 1RA2623-2BB50 1RA2632-4BB50 1750 1200 2300 6811 $198,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-6BE50 1750 1750 900 720 2300 2300 6813 6813 $231,536 $257,252 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2736-8BE50 1RA2743-3BE50 2000 3600 2300 5810 $106,984 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2623-2BB50 2000 1800 2300 5812 $145,570 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-4BE50 2000 2000 1200 900 2300 2300 6813 6813 $225,112 $244,396 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2734-6BE50 1RA2741-8BE50 2250 3600 2300 5812 $127,291 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2627-2BB50 2250 2250 1800 1200 2300 2300 6811 6813 $179,150 $237,969 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2725-4BE50 1RA2738-6BE50 2500 3600 2300 5812 $135,537 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB50 2500 1800 2300 6811 $183,972 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE50 2500 3000 1200 3600 2300 2300 6813 6811 $244,396 $187,543 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CG CG 1RA2741-6BE50 1RA2723-2BE50 3000 1800 2300 6813 $207,511 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-4BE50 3500 3500 3600 1800 2300 2300 6813 6813 $214,479 $220,364 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CG CG 1RA2727-2BE50 1RA2736-4BE50 4000 3600 2300 6813 $221,077 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2730-2BE50 4000 1800 2300 6813 $233,227 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE50 4500 5000 3600 3600 2300 2300 6813 6813 $227,677 $234,284 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CG CG 1RA2732-2BE50 1RA2734-2BE50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 2 6 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 60 Hertz Basic List Prices 4000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB40 $45,891 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BB40 $50,103 $60,271 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2514-8BB40 1RA2612-3BB40 588 $71,945 Alum. Diecast Ball - Grease Lube 5810 6811 $106,070 $175,882 HP RPM Voltage Frame 200 3600 4000 508 $49,625 200 1800 4000 508 $45,891 200 1200 4000 508 200 200 900 720 4000 4000 508 588 200 600 4000 200 200 514 450 4000 4000 250 3600 4000 508 250 1800 4000 508 250 250 1200 900 4000 4000 250 720 250 250 600 514 250 300 300 300 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2616-5BB40 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2623-7BE40 1RA2718-9BE40 $50,393 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40 $46,578 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB40 508 508 $47,817 $53,956 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-6BB40 1RA2518-8BB40 4000 588 $63,607 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-3BB40 4000 4000 588 5810 $80,357 $107,712 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-5BB40 1RA2623-7BE40 450 4000 6811 $178,665 Self Bi-directional CG 1RA2718-9BE40 3600 4000 508 $51,186 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40 1800 1200 4000 4000 508 508 $47,817 $50,103 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2512-4BB40 1RA2514-6BB40 300 900 4000 5010 $63,053 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-8BB40 300 300 720 600 4000 4000 588 588 $71,945 $83,466 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2616-3BB40 1RA2621-5BB40 300 514 4000 6811 $175,882 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-7BE40 300 450 4000 6811 $182,315 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-9BE40 350 350 3600 1800 4000 4000 508 508 $52,003 $50,103 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2508-2BB40 1RA2514-4BB40 350 1200 4000 508 $52,035 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB40 350 350 900 720 4000 4000 5010 588 $66,861 $80,357 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2527-8BB40 1RA2618-3BB40 350 600 4000 5810 $88,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-5BB40 350 514 4000 6811 $182,315 Self Bi-directional CG 1RA2721-7BE40 350 400 450 3600 4000 4000 6811 508 $185,199 $52,796 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2721-9BE40 1RA2511-2BB40 400 1800 4000 508 $50,853 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB40 400 400 1200 900 4000 4000 508 5010 $53,956 $82,720 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-6BB40 1RA2530-8BE40 400 720 4000 588 $83,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-3BB40 400 600 4000 5810 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BB40 400 400 514 450 4000 4000 6811 6811 $185,199 $188,741 Self Self Bi-directional Bi-directional CG CG 1RA2721-7BE40 1RA2723-9BE40 Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Section 1 Part 2 7 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 60 Hertz Basic List Prices 4000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB40 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB40 $61,366 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BB40 588 5810 $80,357 $88,683 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-8BB40 1RA2623-3BB40 4000 5810 $120,479 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BE40 4000 4000 6811 6811 $188,741 $201,601 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2723-7BE40 1RA2727-9BE40 3600 4000 508 $54,456 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB40 1800 4000 508 $52,814 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB40 500 500 1200 900 4000 4000 5010 588 $65,032 $83,466 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2525-6BB40 1RA2621-8BB40 500 720 4000 5810 $103,091 Alum. Diecast Ball - Grease Lube 500 500 600 514 4000 4000 6811 6811 $182,315 $195,174 500 450 4000 6811 $206,296 600 3600 4000 508 $55,970 Alum. Diecast Ball - Grease Lube 600 600 1800 1200 4000 4000 508 5010 $53,956 $66,861 600 900 4000 5810 $100,396 600 600 720 600 4000 4000 6811 6811 $175,882 $185,199 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube 600 514 4000 6811 $206,296 Copper Bar 600 450 4000 6813 $241,234 Copper Bar 700 700 3600 1800 4000 4000 508 5010 $56,836 $63,053 700 1200 4000 588 700 700 900 720 4000 4000 5810 6811 700 600 4000 6811 $188,741 Copper Bar 700 514 4000 6813 $234,807 Copper Bar 700 800 450 3600 4000 4000 6813 508 $260,520 $60,317 800 1800 4000 5010 800 800 1200 900 4000 4000 5810 5810 800 720 4000 6811 $195,174 Copper Bar 800 600 4000 6811 $201,601 Copper Bar 800 900 514 3600 4000 4000 6813 5010 $254,093 $68,741 900 1800 4000 5010 900 900 1200 900 4000 4000 5810 5812 900 720 4000 6811 $201,601 Copper Bar 900 600 4000 6811 $206,296 Copper Bar HP RPM Voltage Frame 450 3600 4000 508 $53,613 450 1800 4000 508 $52,035 450 1200 4000 5010 450 450 900 720 4000 4000 450 600 450 450 514 450 500 500 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2627-3BB40 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2721-5BE40 1RA2725-7BE40 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-9BE40 Self Uni-directional CG 1RA2513-2BB40 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-4BB40 1RA2527-6BB40 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB40 Self Self Bi-directional Bi-directional CG CG 1RA2718-3BE40 1RA2721-5BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2730-7BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2736-9BE40 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2513-2BB40 1RA2523-4BB40 $83,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB40 $103,091 $182,315 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2627-8BB40 1RA2721-3BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2723-5BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2734-7BE40 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2743-9BE40 1RA2515-2BB40 $66,861 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB40 $88,683 $120,479 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2623-6BB40 1RA2627-8BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE40 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2741-7BE40 1RA2516-2BB40 $67,862 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB40 $100,396 $136,146 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2625-6BB40 1RA2632-8BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2727-3BE40 Sleeve - Oil Lube Self Bi-directional CG 1RA2730-5BE40 Section 1 Part 2 8 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 60 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 4000 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD 1000 3600 4000 5010 $71,915 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB40 1000 1800 4000 5810 $85,177 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB40 1000 1200 4000 5810 $120,479 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-6BE40 1000 1000 900 720 4000 4000 5812 6811 $147,162 $206,296 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2636-8BE40 1RA2730-3BE40 1000 600 4000 6813 $241,234 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE40 1250 1250 3600 1800 4000 4000 5010 5810 $78,259 $100,396 Self Self Uni-directional Bi-directional CG CG 1RA2523-2BB40 1RA2625-4BB40 1250 1200 4000 5812 $136,146 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE40 1250 900 4000 6811 $187,006 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE40 1250 1250 720 600 4000 4000 6813 6813 $241,234 $260,520 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2736-3BE40 1RA2743-5BE40 1500 3600 4000 5810 $98,720 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB40 1500 1500 1800 1200 4000 4000 5810 5812 $103,091 $147,162 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2627-4BB40 1RA2636-6BE40 1500 900 4000 6811 $199,869 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE40 1500 720 4000 6813 $260,520 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE40 1750 1750 3600 1800 4000 4000 5810 5812 $100,282 $122,573 Self Self Uni-directional Bi-directional CG CG 1RA2623-2BB40 1RA2634-4BB40 1750 1200 4000 6811 $199,869 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-6BE40 1750 1750 900 720 4000 4000 6813 6813 $234,807 $264,642 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2736-8BE40 1RA2743-3BE40 2000 3600 4000 5810 $110,041 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2623-2BB40 2000 1800 4000 5812 $146,796 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-4BE40 2000 2000 1200 900 4000 4000 6813 6813 $228,380 $247,670 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2734-6BE40 1RA2741-8BE40 2250 3600 4000 5812 $139,830 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB40 2250 2250 1800 1200 4000 4000 6811 6813 $180,168 $241,234 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2725-4BE40 1RA2738-6BE40 2500 3600 4000 5812 $141,914 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB40 2500 1800 4000 6811 $184,997 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE40 2500 3000 1200 3600 4000 4000 6813 6811 $247,670 $188,578 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CG CG 1RA2741-6BE40 1RA2723-2BE40 3000 1800 4000 6813 $210,782 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-4BE40 3500 3500 3600 1800 4000 4000 6813 6813 $217,843 $223,642 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CG CG 1RA2727-2BE40 1RA2736-4BE40 4000 3600 4000 6813 $224,438 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2730-2BE40 4000 1800 4000 6813 $236,492 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE40 4500 5000 3600 3600 4000 4000 6813 6813 $231,038 $237,642 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CG CG 1RA2732-2BE40 1RA2734-2BE40 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 2 9 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 60 Hertz Basic List Prices 6600 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB10 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB10 $85,738 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10 588 6811 $82,628 $179,150 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-8BB10 1RA2718-3BE10 6600 6811 $179,150 Self Bi-directional CG 1RA2718-5BE10 6600 6600 508 508 $55,872 $56,153 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2511-2BB10 1RA2516-4BB10 1200 6600 588 $87,065 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10 900 6600 588 $83,907 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB10 400 400 720 600 6600 6600 6811 6811 $181,984 $185,579 Self Self Bi-directional Bi-directional CG CG 1RA2718-3BE10 1RA2721-5BE10 450 3600 6600 508 $56,737 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB10 450 450 1800 1200 6600 6600 5010 588 $63,271 $88,434 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-4BB10 1RA2621-6BB10 450 900 6600 588 $85,738 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB10 450 720 6600 6811 $185,579 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10 450 450 600 514 6600 6600 6811 6811 $188,516 $204,869 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2721-5BE10 1RA2727-7BE10 500 3600 6600 508 $60,232 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB10 500 500 1800 1200 6600 6600 5010 588 $65,490 $89,847 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2521-4BB10 1RA2621-6BB10 500 900 6600 5810 $107,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BB10 500 720 6600 6811 $188,516 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10 500 500 600 514 6600 6600 6811 6811 $192,009 $209,570 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2723-5BE10 1RA2730-7BE10 600 3600 6600 5010 $69,960 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB10 600 600 1800 1200 6600 6600 5010 5810 $67,171 $103,210 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2523-4BB10 1RA2625-6BB10 600 900 6600 5810 $125,378 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-8BE10 600 720 6600 6811 $191,547 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10 600 600 600 514 6600 6600 6811 6813 $204,869 $244,508 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2727-5BE10 1RA2736-7BE10 700 3600 6600 5010 $71,043 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB10 700 700 1800 1200 6600 6600 5010 5810 $69,150 $120,598 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2525-4BB10 1RA2625-6BE10 700 900 6600 5812 $134,921 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-8BE10 700 720 6600 6811 $198,436 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE10 700 700 600 514 6600 6600 6811 6813 $208,111 $257,364 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2727-5BE10 1RA2741-7BE10 800 3600 6600 5010 $76,177 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB10 800 800 1800 1200 6600 6600 588 5812 $82,628 $134,921 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2618-4BB10 1RA2630-6BE10 800 900 6600 5812 $141,037 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-8BE10 800 720 6600 6811 $201,576 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE10 800 600 6600 6811 $216,000 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-5BE10 HP RPM Voltage Frame 300 1800 6600 508 $54,227 350 1800 6600 508 $55,039 350 1200 6600 588 350 350 900 720 6600 6600 350 600 400 400 3600 1800 400 400 Std. Rotor Construction - Copper Bar Copper Bar Copper Bar Std. Bearings & Lubrication Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Section 1 Part 2 10 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 6600 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB10 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB10 Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE10 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2723-8BE10 1RA2730-3BE10 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE10 Self Self Uni-directional Bi-directional CG CG 1RA2518-2BB10 1RA2623-4BB10 HP RPM Voltage Frame 900 3600 6600 5010 $77,356 900 1800 6600 5810 $87,985 900 1200 6600 5812 $141,037 Copper Bar 900 900 900 720 6600 6600 6811 6811 $183,854 $209,570 Std. Bearings & Lubrication 900 600 6600 6813 $244,508 1000 1000 3600 1800 6600 6600 5010 5810 $78,572 $91,512 1000 1200 6600 5812 $147,162 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-6BE10 1000 900 6600 6811 $190,283 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE10 1000 1000 720 600 6600 6600 6813 6813 $238,075 $257,364 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2734-3BE10 1RA2741-5BE10 1250 3600 6600 5810 $99,788 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2621-2BB10 1250 1250 1800 1200 6600 6600 5810 6811 $103,210 $190,283 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CG CG 1RA2625-4BB10 1RA2725-6BE10 1250 900 6600 6811 $203,140 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE10 1250 720 6600 6813 $263,791 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE10 1500 1500 3600 1800 6600 6600 5810 5812 $108,361 $127,476 Self Self Uni-directional Bi-directional CG CG 1RA2623-2BB10 1RA2634-4BB10 1500 1200 6600 6811 $203,140 Self Bi-directional CG 1RA2730-6BE10 1500 1750 900 3600 6600 6600 6813 5810 $238,075 $110,076 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2736-8BE10 1RA2623-2BB10 1750 1800 6600 5812 $129,449 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2634-4BB10 1750 1200 6600 6813 $231,651 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-6BE10 1750 2000 900 3600 6600 6600 6813 5812 $250,938 $139,830 Copper Bar Alum. Diecast Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CG CG 1RA2741-8BE10 1RA2630-2BB10 2000 1800 6600 6811 $188,262 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE10 2000 2250 1200 3600 6600 6600 6813 5812 $244,508 $146,098 Copper Bar Alum. Diecast Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CG CG 1RA2738-6BE10 1RA2632-2BB10 2250 1800 6600 6811 $200,262 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-4BE10 2250 1200 6600 6813 $250,938 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-6BE10 2500 2500 3600 1800 6600 6600 6811 6813 $191,942 $220,483 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CG CG 1RA2723-2BE10 1RA2734-4BE10 3000 3600 6600 6813 $198,099 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2725-2BE10 3000 3500 1800 3600 6600 6600 6813 6813 $233,343 $227,808 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CG CG 1RA2738-4BE10 1RA2730-2BE10 3500 1800 6600 6813 $239,773 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE10 4000 3600 6600 6813 $241,000 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2734-2BE10 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 3 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 60 Hertz Basic List Prices 460 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2506-2BA10 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2507-4BA10 $47,490 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-6BA10 $49,422 $62,161 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2512-8BA10 1RP2612-3BA10 588 $62,616 Alum. Diecast Ball - Grease Lube 588 588 $100,290 $100,290 460 508 460 508 1200 900 460 460 250 720 250 250 600 514 300 300 HP RPM Voltage Frame 200 3600 460 508 $50,840 200 1800 460 508 $46,254 200 1200 460 508 200 200 900 720 460 460 508 588 200 600 460 200 200 514 450 460 460 250 3600 250 1800 250 250 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CGII 1RP2614-5BA10 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2618-7BD10 1RP2618-9BD10 $51,652 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2506-2BA10 $47,490 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BA10 508 508 $49,422 $51,708 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2512-6BA10 1RP2514-8BA10 460 588 $63,138 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2612-3BA10 460 460 588 588 $74,198 $103,189 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2616-5BA10 1RP2621-7BD10 3600 460 508 $51,274 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BA10 1800 460 508 $48,201 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BA10 300 300 1200 900 460 460 508 508 $51,708 $55,552 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2514-6BA10 1RP2518-8BA10 300 720 460 588 $66,134 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2614-3BA10 300 300 600 514 460 460 588 5810 $82,899 $108,960 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2618-5BA10 1RP2623-7BD10 350 3600 460 508 $52,068 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BA10 350 1800 460 508 $49,422 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-4BA10 350 350 1200 900 460 460 508 508 $53,634 $58,298 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2516-6BA10 1RP2521-8BA10 350 720 460 588 $74,198 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2616-3BA10 350 400 600 3600 460 460 5810 508 $91,573 $53,271 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2623-5BA10 1RP2511-2BA10 400 1800 460 508 $51,708 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BA10 400 1200 460 508 $54,437 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-6BA10 400 400 900 720 460 460 5010 588 $66,168 $82,899 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2525-8BA10 1RP2618-3BA10 400 600 460 5810 $103,284 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-5BA10 450 450 3600 1800 460 460 508 508 $54,096 $52,482 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2511-2BA10 1RP2514-4BA10 450 1200 460 5010 $62,971 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-6BA10 450 900 460 5010 $70,295 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2530-8BA10 450 450 720 600 460 460 588 5810 $85,802 $124,530 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2621-3BA10 1RP2627-5BD10 500 3600 460 508 $57,619 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BA10 500 500 1800 1200 460 460 508 5010 $53,634 $66,631 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2516-4BA10 1RP2525-6BA10 500 900 460 588 $82,899 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-8BA10 500 720 460 5810 $91,573 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-3BA10 500 600 460 5810 $126,458 Self Bi-directional CGII 1RP2627-5BD10 Copper Bar Copper Bar Copper Bar Ball - Grease Lube Section 1 Part 3 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 60 Hertz Basic List Prices 460 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BA10 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-4BA10 $68,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-6BA10 588 5810 $85,802 $107,143 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2621-8BA10 1RP2627-3BA10 460 508 $61,979 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2515-2BA10 460 460 5010 588 $62,971 $82,899 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2521-4BA10 1RP2618-6BA10 900 460 5810 $103,284 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-8BA10 3600 460 5010 $70,399 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BA10 1800 1200 460 460 5010 588 $64,799 $85,802 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2523-4BA10 1RP2621-6BA10 900 460 5810 $107,143 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BA10 HP RPM Voltage Frame 600 3600 460 508 $58,511 600 1800 460 508 $55,552 600 1200 460 5010 600 600 900 720 460 460 700 3600 700 700 1800 1200 700 800 800 800 800 Std. Rotor Construction - Std. Bearings & Lubrication Section 1 Part 3 3 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 60 Hertz Basic List Prices 2300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB50 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BB50 $48,401 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-6BB50 $50,330 $64,505 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2512-8BB50 1RP2612-3BB50 588 $65,567 Alum. Diecast Ball - Grease Lube 588 6811 $104,125 $184,648 2300 508 2300 508 1200 900 2300 2300 250 720 250 250 600 514 250 300 300 300 HP RPM Voltage Frame 200 3600 2300 508 $52,226 200 1800 2300 508 $48,401 200 1200 2300 508 200 200 900 720 2300 2300 508 588 200 600 2300 200 200 514 450 2300 2300 250 3600 250 1800 250 250 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CGII 1RP2614-5BB50 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2621-7BE50 1RP2718-9BE50 $53,034 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB50 $49,126 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BB50 508 508 $50,330 $54,546 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2512-6BB50 1RP2516-8BB50 2300 588 $65,519 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2612-3BB50 2300 2300 588 5810 $84,433 $110,838 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2618-5BB50 1RP2623-7BE50 450 2300 6811 $187,570 Self Bi-directional CGII 1RP2718-9BE50 3600 2300 508 $53,868 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB50 1800 1200 2300 2300 508 508 $50,330 $52,617 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2512-4BB50 1RP2514-6BB50 300 900 2300 508 $59,218 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-8BB50 300 300 720 600 2300 2300 588 588 $67,988 $86,738 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2614-3BB50 1RP2621-5BB50 300 514 2300 5810 $124,643 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-7BE50 300 450 2300 6811 $190,585 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-9BE50 350 350 3600 1800 2300 2300 508 508 $54,728 $52,617 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2508-2BB50 1RP2514-4BB50 350 1200 2300 508 $54,546 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-6BB50 350 350 900 720 2300 2300 5010 588 $69,381 $76,265 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2527-8BB50 1RP2616-3BB50 350 600 2300 5810 $93,451 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-5BB50 350 514 2300 6811 $184,648 Self Bi-directional CGII 1RP2718-7BE50 350 400 450 3600 2300 2300 6811 508 $193,984 $55,396 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2721-9BE50 1RP2511-2BB50 400 1800 2300 508 $53,404 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB50 400 400 1200 900 2300 2300 508 5010 $56,475 $71,215 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2518-6BB50 1RP2530-8BB50 400 720 2300 588 $84,433 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-3BB50 400 600 2300 5810 $103,677 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-5BB50 400 400 514 450 2300 2300 6811 6811 $191,084 $197,054 Self Self Bi-directional Bi-directional CGII CGII 1RP2721-7BE50 1RP2721-9BE50 Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Section 1 Part 3 4 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 60 Hertz Basic List Prices 2300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB50 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB50 $63,888 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-6BB50 588 588 $84,433 $86,738 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2618-8BB50 1RP2621-3BB50 2300 5810 $124,643 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-5BE50 2300 2300 6811 6811 $194,108 $203,938 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2721-7BE50 1RP2725-9BE50 3600 2300 508 $57,138 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB50 1800 2300 508 $55,362 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB50 500 500 1200 900 2300 2300 5010 588 $67,363 $86,738 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2525-6BB50 1RP2621-8BB50 500 720 2300 5810 $93,451 Alum. Diecast Ball - Grease Lube 500 500 600 514 2300 2300 6811 6811 $184,648 $203,938 500 450 2300 6811 $210,368 600 3600 2300 508 $58,567 Alum. Diecast Ball - Grease Lube 600 600 1800 1200 2300 2300 508 5010 $56,475 $69,381 600 900 2300 5810 600 600 720 600 2300 2300 5810 6811 600 514 2300 6811 $215,069 Copper Bar 600 450 2300 6811 $221,502 Copper Bar 700 700 3600 1800 2300 2300 508 5010 $59,474 $65,566 700 1200 2300 588 700 700 900 720 2300 2300 5810 6811 700 600 2300 6811 $197,511 Copper Bar 700 514 2300 6813 $241,324 Copper Bar 700 800 450 3600 2300 2300 6813 508 $267,040 $62,921 800 1800 2300 5010 800 800 1200 900 2300 2300 588 5810 800 720 2300 6811 $203,938 Copper Bar 800 600 2300 6811 $210,368 Copper Bar 800 900 514 3600 2300 2300 6813 5010 $260,607 $71,345 900 1800 2300 5010 900 900 1200 900 2300 2300 5810 5812 900 720 2300 6811 $207,165 Copper Bar 900 600 2300 6811 $215,069 Copper Bar 900 514 2300 6813 $267,040 Copper Bar HP RPM Voltage Frame 450 3600 2300 508 $56,254 450 1800 2300 508 $54,546 450 1200 2300 5010 450 450 900 720 2300 2300 450 600 450 450 514 450 500 500 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CGII 1RP2623-3BB50 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2718-5BE50 1RP2725-7BE50 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-9BE50 Self Uni-directional CGII 1RP2513-2BB50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2518-4BB50 1RP2527-6BB50 $103,677 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-8BB50 $107,256 $191,084 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2627-3BB50 1RP2721-5BE50 Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-7BE50 Sleeve - Oil Lube Self Bi-directional CGII 1RP2732-9BE50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2513-2BB50 1RP2523-4BB50 $86,738 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB50 $107,256 $191,084 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2627-8BB50 1RP2721-3BE50 Sleeve - Oil Lube Self Bi-directional CGII 1RP2723-5BE50 Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-7BE50 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2743-9BE50 1RP2515-2BB50 $69,381 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-4BB50 $88,080 $124,643 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2621-6BB50 1RP2627-8BE50 Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-3BE50 Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-5BE50 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2741-7BE50 1RP2516-2BB50 $70,419 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-4BB50 $93,451 $140,308 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2623-6BB50 1RP2632-8BE50 Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-3BE50 Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-5BE50 Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-7BE50 Section 1 Part 3 5 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 60 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 2300 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD 1000 3600 2300 5010 $74,524 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB50 1000 1800 2300 5810 $89,412 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-4BB50 1000 1200 2300 5810 $124,643 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-6BE50 1000 1000 900 720 2300 2300 5812 6811 $151,326 $210,368 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2636-8BE50 1RP2727-3BE50 1000 600 2300 6813 $247,757 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-5BE50 1250 1250 3600 1800 2300 2300 5010 5810 $80,860 $103,677 Self Self Uni-directional Bi-directional CGII CGII 1RP2523-2BB50 1RP2625-4BB50 1250 1200 2300 5812 $140,308 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-6BE50 1250 900 2300 6811 $195,785 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-8BE50 1250 1250 720 600 2300 2300 6813 6813 $241,324 $267,040 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2734-3BE50 1RP2743-5BE50 1500 3600 2300 5810 $101,262 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2623-2BB50 1500 1500 1800 1200 2300 2300 5810 5812 $107,256 $151,326 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2627-4BB50 1RP2636-6BE50 1500 900 2300 6811 $208,648 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-8BE50 1500 720 2300 6813 $260,607 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-3BE50 1750 1750 3600 1800 2300 2300 5810 5812 $102,864 $120,622 Self Self Uni-directional Bi-directional CGII CGII 1RP2623-2BB50 1RP2632-4BB50 1750 1200 2300 6811 $208,648 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-6BE50 1750 1750 900 720 2300 2300 6813 6813 $241,324 $267,040 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2736-8BE50 1RP2743-3BE50 2000 3600 2300 5810 $112,665 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2623-2BB50 2000 1800 2300 5812 $150,957 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-4BE50 2000 2000 1200 900 2300 2300 6813 6813 $234,900 $254,184 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2734-6BE50 1RP2741-8BE50 2250 3600 2300 5812 $132,796 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2627-2BB50 2250 2250 1800 1200 2300 2300 6811 6813 $188,938 $247,757 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2725-4BE50 1RP2738-6BE50 2500 3600 2300 5812 $141,042 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2632-2BB50 2500 1800 2300 6811 $193,760 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-4BE50 2500 3000 1200 3600 2300 2300 6813 6811 $254,184 $197,581 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2741-6BE50 1RP2723-2BE50 3000 1800 2300 6813 $217,299 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2732-4BE50 3500 3500 3600 1800 2300 2300 6813 6813 $224,518 $230,153 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2727-2BE50 1RP2736-4BE50 4000 3600 2300 6813 $231,115 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2730-2BE50 4000 1800 2300 6813 $243,016 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-4BE50 4500 5000 3600 3600 2300 2300 6813 6813 $237,716 $244,323 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CGII CGII 1RP2732-2BE50 1RP2734-2BE50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 3 6 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 60 Hertz Basic List Prices 4000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB40 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BB40 $49,782 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-6BB40 $53,994 $65,659 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2514-8BB40 1RP2612-3BB40 588 $77,332 Alum. Diecast Ball - Grease Lube 5810 6811 $111,457 $185,670 HP RPM Voltage Frame 200 3600 4000 508 $53,646 200 1800 4000 508 $49,782 200 1200 4000 508 200 200 900 720 4000 4000 508 588 200 600 4000 200 200 514 450 4000 4000 250 3600 4000 508 250 1800 4000 508 250 250 1200 900 4000 4000 250 720 250 250 600 514 250 300 300 300 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CGII 1RP2616-5BB40 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2623-7BE40 1RP2718-9BE40 $54,477 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB40 $50,527 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BB40 508 508 $51,708 $57,847 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2512-6BB40 1RP2518-8BB40 4000 588 $68,994 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2614-3BB40 4000 4000 588 5810 $85,744 $113,183 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2618-5BB40 1RP2623-7BE40 450 4000 6811 $188,608 Self Bi-directional CGII 1RP2718-9BE40 3600 4000 508 $55,333 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB40 1800 1200 4000 4000 508 508 $51,708 $53,994 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2512-4BB40 1RP2514-6BB40 300 900 4000 5010 $66,944 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2523-8BB40 300 300 720 600 4000 4000 588 588 $77,332 $88,854 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2616-3BB40 1RP2621-5BB40 300 514 4000 6811 $185,670 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-7BE40 300 450 4000 6811 $192,103 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-9BE40 350 350 3600 1800 4000 4000 508 508 $56,217 $53,994 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2508-2BB40 1RP2514-4BB40 350 1200 4000 508 $55,926 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-6BB40 350 350 900 720 4000 4000 5010 588 $70,752 $85,744 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2527-8BB40 1RP2618-3BB40 350 600 4000 5810 $94,070 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-5BB40 350 514 4000 6811 $192,103 Self Bi-directional CGII 1RP2721-7BE40 350 400 450 3600 4000 4000 6811 508 $195,142 $56,817 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2721-9BE40 1RP2511-2BB40 400 1800 4000 508 $54,802 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB40 400 400 1200 900 4000 4000 508 5010 $57,847 $86,611 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2518-6BB40 1RP2530-8BE40 400 720 4000 588 $88,854 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-3BB40 400 600 4000 5810 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-5BB40 400 400 514 450 4000 4000 6811 6811 $195,142 $198,530 Self Self Bi-directional Bi-directional CGII CGII 1RP2721-7BE40 1RP2723-9BE40 Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Section 1 Part 3 7 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 60 Hertz Basic List Prices 4000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB40 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB40 $65,257 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-6BB40 588 5810 $85,744 $94,070 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2618-8BB40 1RP2623-3BB40 4000 5810 $125,866 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-5BE40 4000 4000 6811 6811 $198,530 $211,389 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2723-7BE40 1RP2727-9BE40 3600 4000 508 $58,604 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB40 1800 4000 508 $56,763 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB40 500 500 1200 900 4000 4000 5010 588 $68,923 $88,854 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2525-6BB40 1RP2621-8BB40 500 720 4000 5810 $108,479 Alum. Diecast Ball - Grease Lube 500 500 600 514 4000 4000 6811 6811 $192,103 $204,963 500 450 4000 6811 $216,084 600 3600 4000 508 $59,991 Alum. Diecast Ball - Grease Lube 600 600 1800 1200 4000 4000 508 5010 $57,847 $70,752 600 900 4000 5810 $105,784 600 600 720 600 4000 4000 6811 6811 $185,670 $195,142 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube 600 514 4000 6811 $216,084 Copper Bar 600 450 4000 6813 $251,022 Copper Bar 700 700 3600 1800 4000 4000 508 5010 $60,920 $66,944 700 1200 4000 588 700 700 900 720 4000 4000 5810 6811 700 600 4000 6811 $198,530 Copper Bar 700 514 4000 6813 $244,595 Copper Bar 700 800 450 3600 4000 4000 6813 508 $270,308 $64,338 800 1800 4000 5010 800 800 1200 900 4000 4000 5810 5810 800 720 4000 6811 $204,963 Copper Bar 800 600 4000 6811 $211,389 Copper Bar 800 900 514 3600 4000 4000 6813 5010 $263,882 $72,762 900 1800 4000 5010 900 900 1200 900 4000 4000 5810 5812 900 720 4000 6811 $211,389 Copper Bar 900 600 4000 6811 $216,084 Copper Bar HP RPM Voltage Frame 450 3600 4000 508 $57,697 450 1800 4000 508 $55,926 450 1200 4000 5010 450 450 900 720 4000 4000 450 600 450 450 514 450 500 500 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CGII 1RP2627-3BB40 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2721-5BE40 1RP2725-7BE40 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-9BE40 Self Uni-directional CGII 1RP2513-2BB40 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2518-4BB40 1RP2527-6BB40 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-8BB40 Self Self Bi-directional Bi-directional CGII CGII 1RP2718-3BE40 1RP2721-5BE40 Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-7BE40 Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-9BE40 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2513-2BB40 1RP2523-4BB40 $88,854 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB40 $108,479 $192,103 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2627-8BB40 1RP2721-3BE40 Sleeve - Oil Lube Self Bi-directional CGII 1RP2723-5BE40 Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-7BE40 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2743-9BE40 1RP2515-2BB40 $70,752 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-4BB40 $94,070 $125,866 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2623-6BB40 1RP2627-8BE40 Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-3BE40 Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-5BE40 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2741-7BE40 1RP2516-2BB40 $71,811 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-4BB40 $105,784 $141,534 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2625-6BB40 1RP2632-8BE40 Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-3BE40 Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-5BE40 Section 1 Part 3 8 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 60 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 4000 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD 1000 3600 4000 5010 $75,936 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB40 1000 1800 4000 5810 $90,564 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-4BB40 1000 1200 4000 5810 $125,866 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-6BE40 1000 1000 900 720 4000 4000 5812 6811 $152,549 $216,084 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2636-8BE40 1RP2730-3BE40 1000 600 4000 6813 $251,022 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-5BE40 1250 1250 3600 1800 4000 4000 5010 5810 $82,280 $105,784 Self Self Uni-directional Bi-directional CGII CGII 1RP2523-2BB40 1RP2625-4BB40 1250 1200 4000 5812 $141,534 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-6BE40 1250 900 4000 6811 $196,794 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-8BE40 1250 1250 720 600 4000 4000 6813 6813 $251,022 $270,308 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2736-3BE40 1RP2743-5BE40 1500 3600 4000 5810 $104,224 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2623-2BB40 1500 1500 1800 1200 4000 4000 5810 5812 $108,479 $152,549 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2627-4BB40 1RP2636-6BE40 1500 900 4000 6811 $209,657 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-8BE40 1500 720 4000 6813 $270,308 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-3BE40 1750 1750 3600 1800 4000 4000 5810 5812 $105,873 $127,960 Self Self Uni-directional Bi-directional CGII CGII 1RP2623-2BB40 1RP2634-4BB40 1750 1200 4000 6811 $209,657 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-6BE40 1750 1750 900 720 4000 4000 6813 6813 $244,595 $274,585 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2736-8BE40 1RP2743-3BE40 2000 3600 4000 5810 $115,723 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2623-2BB40 2000 1800 4000 5812 $152,183 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-4BE40 2000 2000 1200 900 4000 4000 6813 6813 $238,168 $257,458 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2734-6BE40 1RP2741-8BE40 2250 3600 4000 5812 $145,335 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2632-2BB40 2250 2250 1800 1200 4000 4000 6811 6813 $189,956 $251,022 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2725-4BE40 1RP2738-6BE40 2500 3600 4000 5812 $147,505 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2632-2BB40 2500 1800 4000 6811 $194,785 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-4BE40 2500 3000 1200 3600 4000 4000 6813 6811 $257,458 $198,617 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2741-6BE40 1RP2723-2BE40 3000 1800 4000 6813 $220,570 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2732-4BE40 3500 3500 3600 1800 4000 4000 6813 6813 $227,882 $233,430 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2727-2BE40 1RP2736-4BE40 4000 3600 4000 6813 $234,476 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2730-2BE40 4000 1800 4000 6813 $246,280 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-4BE40 4500 5000 3600 3600 4000 4000 6813 6813 $241,077 $247,681 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CGII CGII 1RP2732-2BE40 1RP2734-2BE40 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 3 9 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 60 Hertz Basic List Prices 6600 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB10 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB10 $91,125 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB10 588 6811 $88,015 $188,938 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2618-8BB10 1RP2718-3BE10 6600 6811 $188,938 Self Bi-directional CGII 1RP2718-5BE10 6600 6600 508 508 $59,893 $60,044 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2511-2BB10 1RP2516-4BB10 1200 6600 588 $92,536 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB10 900 6600 588 $89,378 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-8BB10 400 400 720 600 6600 6600 6811 6811 $191,927 $195,368 Self Self Bi-directional Bi-directional CGII CGII 1RP2718-3BE10 1RP2721-5BE10 450 3600 6600 508 $60,820 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB10 450 450 1800 1200 6600 6600 5010 588 $67,162 $93,991 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2518-4BB10 1RP2621-6BB10 450 900 6600 588 $91,125 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-8BB10 450 720 6600 6811 $195,368 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-3BE10 450 450 600 514 6600 6600 6811 6811 $198,459 $214,657 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2721-5BE10 1RP2727-7BE10 500 3600 6600 508 $64,253 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB10 500 500 1800 1200 6600 6600 5010 588 $69,381 $95,492 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2521-4BB10 1RP2621-6BB10 500 900 6600 5810 $113,378 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BB10 500 720 6600 6811 $198,459 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-3BE10 500 500 600 514 6600 6600 6811 6811 $201,798 $219,358 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2723-5BE10 1RP2730-7BE10 600 3600 6600 5010 $73,982 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BB10 600 600 1800 1200 6600 6600 5010 5810 $71,062 $108,598 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2523-4BB10 1RP2625-6BB10 600 900 6600 5810 $130,765 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BE10 600 720 6600 6811 $201,650 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-3BE10 600 600 600 514 6600 6600 6811 6813 $214,657 $254,296 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2727-5BE10 1RP2736-7BE10 700 3600 6600 5010 $75,127 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BB10 700 700 1800 1200 6600 6600 5010 5810 $73,041 $125,985 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2525-4BB10 1RP2625-6BE10 700 900 6600 5812 $140,308 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2630-8BE10 700 720 6600 6811 $208,224 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-3BE10 700 700 600 514 6600 6600 6811 6813 $218,054 $267,153 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2727-5BE10 1RP2741-7BE10 800 3600 6600 5010 $80,198 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB10 800 800 1800 1200 6600 6600 588 5812 $88,015 $140,308 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2618-4BB10 1RP2630-6BE10 800 900 6600 5812 $146,424 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-8BE10 800 720 6600 6811 $211,519 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-3BE10 800 600 6600 6811 $225,788 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2732-5BE10 HP RPM Voltage Frame 300 1800 6600 508 $58,118 350 1800 6600 508 $58,988 350 1200 6600 588 350 350 900 720 6600 6600 350 600 400 400 3600 1800 400 400 Std. Rotor Construction - Copper Bar Copper Bar Copper Bar Std. Bearings & Lubrication Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Section 1 Part 3 10 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 6600 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB10 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-4BB10 Ball - Grease Lube Self Bi-directional CGII 1RP2632-6BE10 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2723-8BE10 1RP2730-3BE10 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-5BE10 Self Self Uni-directional Bi-directional CGII CGII 1RP2518-2BB10 1RP2623-4BB10 HP RPM Voltage Frame 900 3600 6600 5010 $81,440 900 1800 6600 5810 $93,372 900 1200 6600 5812 $146,424 Copper Bar 900 900 900 720 6600 6600 6811 6811 $193,642 $219,358 Std. Bearings & Lubrication 900 600 6600 6813 $254,296 1000 1000 3600 1800 6600 6600 5010 5810 $82,720 $96,899 1000 1200 6600 5812 $152,549 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2634-6BE10 1000 900 6600 6811 $200,072 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-8BE10 1000 1000 720 600 6600 6600 6813 6813 $247,863 $267,153 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2734-3BE10 1RP2741-5BE10 1250 3600 6600 5810 $105,293 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2621-2BB10 1250 1250 1800 1200 6600 6600 5810 6811 $108,598 $200,072 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2625-4BB10 1RP2725-6BE10 1250 900 6600 6811 $212,928 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-8BE10 1250 720 6600 6813 $273,579 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-3BE10 1500 1500 3600 1800 6600 6600 5810 5812 $113,866 $132,863 Self Self Uni-directional Bi-directional CGII CGII 1RP2623-2BB10 1RP2634-4BB10 1500 1200 6600 6811 $212,928 Self Bi-directional CGII 1RP2730-6BE10 1500 1750 900 3600 6600 6600 6813 5810 $247,863 $115,668 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2736-8BE10 1RP2623-2BB10 1750 1800 6600 5812 $134,920 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2634-4BB10 1750 1200 6600 6813 $241,439 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-6BE10 1750 2000 900 3600 6600 6600 6813 5812 $260,726 $145,335 Copper Bar Alum. Diecast Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2741-8BE10 1RP2630-2BB10 2000 1800 6600 6811 $198,050 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-4BE10 2000 2250 1200 3600 6600 6600 6813 5812 $254,296 $151,603 Copper Bar Alum. Diecast Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2738-6BE10 1RP2632-2BB10 2250 1800 6600 6811 $210,050 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-4BE10 2250 1200 6600 6813 $260,726 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-6BE10 2500 2500 3600 1800 6600 6600 6811 6813 $201,981 $230,271 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2723-2BE10 1RP2734-4BE10 3000 3600 6600 6813 $208,137 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2725-2BE10 3000 3500 1800 3600 6600 6600 6813 6813 $243,131 $237,847 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2738-4BE10 1RP2730-2BE10 3500 1800 6600 6813 $249,561 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-4BE10 4000 3600 6600 6813 $251,038 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2734-2BE10 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 4 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEWAC ENCLOSURE 60 Hertz Basic List Prices 460 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2612-3BA10 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2614-5BA10 Ball - Grease Lube Self Bi-directional CGG 1RN2618-7BD10 $147,979 $112,327 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2618-9BD10 1RN2612-3BA10 588 $121,887 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-5BA10 588 588 $150,878 $113,823 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2621-7BD10 1RN2614-3BA10 460 588 $130,588 Alum. Diecast Ball - Grease Lube 460 5810 $156,649 720 600 460 460 588 5810 400 720 460 400 450 600 720 460 460 450 600 460 5810 $172,220 500 900 460 588 $130,588 500 500 720 600 460 460 5810 5810 $139,262 $174,885 600 900 460 588 600 700 720 1200 460 460 5810 588 700 900 460 800 1200 460 800 900 460 HP RPM Voltage Frame 200 720 460 588 $110,588 200 600 460 588 $110,305 200 514 460 588 $147,979 200 250 450 720 460 460 588 588 250 600 460 250 300 514 720 460 460 300 600 300 514 350 350 Std. Rotor Construction - Copper Bar Std. Bearings & Lubrication Self Bi-directional CGG 1RN2618-5BA10 Ball - Grease Lube Self Bi-directional CGG 1RN2623-7BD10 $121,887 $139,262 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2616-3BA10 1RN2623-5BA10 588 $130,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-3BA10 5810 588 $150,973 $133,491 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2625-5BA10 1RN2621-3BA10 Ball - Grease Lube Self Bi-directional CGG 1RN2627-5BD10 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-8BA10 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2623-3BA10 1RN2627-5BD10 $133,491 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-8BA10 $154,832 $130,588 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2627-3BA10 1RN2618-6BA10 5810 $150,973 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-8BA10 588 $133,491 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BA10 5810 $154,832 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-8BA10 Copper Bar Copper Bar Section 1 Part 4 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEWAC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 2300 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2612-3BB50 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2614-5BB50 Ball - Grease Lube Self Bi-directional CGG 1RN2621-7BE50 $258,140 $114,708 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2718-9BE50 1RN2612-3BB50 588 $132,122 Alum. Diecast Ball - Grease Lube 5810 6811 $158,527 $262,225 HP RPM Voltage Frame 200 720 2300 588 $112,932 200 600 2300 588 $113,256 200 514 2300 588 $151,814 200 250 450 720 2300 2300 6811 588 250 600 2300 250 250 514 450 2300 2300 300 720 2300 588 300 600 2300 588 300 300 514 450 2300 2300 5810 6811 $172,332 $266,441 350 720 2300 588 350 350 600 514 2300 2300 5810 6811 350 450 2300 6811 $267,477 400 720 2300 588 $132,122 Alum. Diecast Ball - Grease Lube 400 400 600 514 2300 2300 5810 6811 $151,366 $264,576 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube 400 450 2300 6811 $271,709 450 450 900 720 2300 2300 588 588 $132,122 $134,427 450 600 2300 5810 $172,332 Copper Bar 450 514 2300 6811 $268,763 Copper Bar 450 500 450 900 2300 2300 6811 588 $277,430 $134,427 500 720 2300 5810 $141,140 500 500 600 514 2300 2300 6811 6811 $258,140 $277,430 500 450 2300 6811 $283,860 600 900 2300 5810 $151,366 Alum. Diecast Ball - Grease Lube 600 600 720 600 2300 2300 5810 6811 $154,945 $264,576 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube 600 514 2300 6811 $288,561 600 700 450 1200 2300 2300 6811 588 $294,994 $134,427 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube 700 900 2300 5810 $154,945 Alum. Diecast Ball - Grease Lube 700 720 2300 6811 $264,576 Copper Bar Sleeve - Oil Lube 700 700 600 514 2300 2300 6811 6813 $271,003 $314,816 Copper Bar Copper Bar 700 450 2300 6813 $340,533 Copper Bar 800 800 1200 900 2300 2300 588 5810 $136,508 $172,332 800 720 2300 6811 $277,430 Copper Bar 800 600 2300 6811 $283,860 Copper Bar 800 514 2300 6813 $334,100 Copper Bar Copper Bar Self Bi-directional CGG 1RN2618-5BB50 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2623-7BE50 1RN2718-9BE50 $115,677 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2614-3BB50 $134,427 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-5BB50 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2627-7BE50 1RN2718-9BE50 $123,954 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-3BB50 $141,140 $258,140 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2623-5BB50 1RN2718-7BE50 Self Bi-directional CGG 1RN2721-9BE50 Self Bi-directional CGG 1RN2618-3BB50 Self Self Bi-directional Bi-directional CGG CGG 1RN2625-5BB50 1RN2721-7BE50 Self Bi-directional CGG 1RN2721-9BE50 Self Self Bi-directional Bi-directional CGG CGG 1RN2618-8BB50 1RN2621-3BB50 Ball - Grease Lube Self Bi-directional CGG 1RN2627-5BE50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-7BE50 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2725-9BE50 1RN2621-8BB50 Alum. Diecast Ball - Grease Lube Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-3BB50 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2718-5BE50 1RN2725-7BE50 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-9BE50 Self Bi-directional CGG 1RN2625-8BB50 Self Self Bi-directional Bi-directional CGG CGG 1RN2627-3BB50 1RN2721-5BE50 Self Bi-directional CGG 1RN2730-7BE50 Self Self Bi-directional Bi-directional CGG CGG 1RN2732-9BE50 1RN2621-6BB50 Self Bi-directional CGG 1RN2627-8BB50 Self Bi-directional CGG 1RN2721-3BE50 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2723-5BE50 1RN2734-7BE50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-9BE50 Self Self Bi-directional Bi-directional CGG CGG 1RN2621-6BB50 1RN2627-8BE50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-3BE50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-5BE50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-7BE50 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Section 1 Part 4 3 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEWAC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 2300 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD Self Bi-directional CGG 1RN2623-6BB50 Self Bi-directional CGG 1RN2632-8BE50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-3BE50 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2730-5BE50 1RN2743-7BE50 Self Bi-directional CGG 1RN2621-4BB50 Self Self Bi-directional Bi-directional CGG CGG 1RN2627-6BE50 1RN2636-8BE50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-3BE50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-5BE50 Self Self Bi-directional Bi-directional CGG CGG 1RN2625-4BB50 1RN2632-6BE50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-8BE50 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2734-3BE50 1RN2743-5BE50 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BB50 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-4BB50 Bi-directional Bi-directional CGG CGG 1RN2636-6BE50 1RN2730-8BE50 HP RPM Voltage Frame 900 1200 2300 5810 $141,140 900 900 2300 5812 $187,997 Copper Bar Ball - Grease Lube 900 720 2300 6811 $281,820 Copper Bar 900 900 600 514 2300 2300 6811 6813 $288,561 $340,533 Copper Bar Copper Bar 1000 1800 2300 5810 $137,101 1000 1000 1200 900 2300 2300 5810 5812 $172,332 $199,015 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube 1000 720 2300 6811 $283,860 Copper Bar 1000 600 2300 6813 $321,249 Copper Bar 1250 1250 1800 1200 2300 2300 5810 5812 $151,366 $187,997 1250 900 2300 6811 $269,277 Copper Bar 1250 1250 720 600 2300 2300 6813 6813 $314,816 $340,533 Copper Bar Copper Bar 1500 3600 2300 5810 $149,991 1500 1800 2300 5810 $154,945 1500 1500 1200 900 2300 2300 5812 6811 $199,015 $282,140 1500 720 2300 6813 $334,100 1750 1750 3600 1800 2300 2300 5810 5812 $152,364 $168,311 1750 1200 2300 6811 $282,140 Copper Bar 1750 900 2300 6813 $314,816 Copper Bar 1750 2000 720 3600 2300 2300 6813 5810 $340,533 $162,961 2000 1800 2300 5812 2000 2000 1200 900 2300 2300 6813 6813 2250 3600 2300 2250 1800 2300 2250 2500 1200 3600 2500 2500 3000 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-3BE50 Self Self Uni-directional Bi-directional CGG CGG 1RN2623-2BB50 1RN2632-4BB50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-6BE50 Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-8BE50 Copper Bar Alum. Diecast Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGG CGG 1RN2743-3BE50 1RN2623-2BB50 $198,646 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2636-4BE50 $308,393 $327,676 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2734-6BE50 1RN2741-8BE50 5812 $181,525 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG 1RN2627-2BB50 6811 $262,430 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-4BE50 2300 2300 6813 5812 $321,249 $189,771 Copper Bar Alum. Diecast Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGG CGG 1RN2738-6BE50 1RN2632-2BB50 1800 2300 6811 $267,252 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-4BE50 1200 3600 2300 2300 6813 6811 $327,676 $272,952 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGG CGG 1RN2741-6BE50 1RN2723-2BE50 3000 1800 2300 6813 $290,791 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2732-4BE50 3500 3600 2300 6813 $299,888 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2727-2BE50 3500 4000 1800 3600 2300 2300 6813 6813 $303,645 $306,486 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGG CGG 1RN2736-4BE50 1RN2730-2BE50 4000 1800 2300 6813 $316,508 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-4BE50 4500 5000 3600 3600 2300 2300 6813 6813 $313,086 $319,693 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CGG CGG 1RN2732-2BE50 1RN2734-2BE50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 4 4 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEWAC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 4000 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2612-3BB40 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-5BB40 Ball - Grease Lube Self Bi-directional CGG 1RN2623-7BE40 $259,162 $116,683 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2718-9BE40 1RN2614-3BB40 588 $133,433 Alum. Diecast Ball - Grease Lube 5810 6811 $161,610 $263,263 HP RPM Voltage Frame 200 720 4000 588 $113,348 200 600 4000 588 $125,021 200 514 4000 5810 $159,146 200 250 450 720 4000 4000 6811 588 250 600 4000 250 250 514 450 4000 4000 300 720 4000 588 300 600 4000 588 300 300 514 450 4000 4000 6811 6811 $259,162 $265,595 350 720 4000 588 $133,433 350 350 600 514 4000 4000 5810 6811 $141,759 $265,595 350 450 4000 6811 $269,797 400 720 4000 588 $136,543 Alum. Diecast Ball - Grease Lube 400 400 600 514 4000 4000 5810 6811 $153,473 $269,797 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube 400 450 4000 6811 $272,022 450 450 900 720 4000 4000 588 5810 $133,433 $141,759 450 600 4000 5810 $173,555 Copper Bar 450 514 4000 6811 $272,022 Copper Bar 450 500 450 900 4000 4000 6811 588 $284,882 $136,543 500 720 4000 5810 $156,168 500 500 600 514 4000 4000 6811 6811 $265,595 $278,455 500 450 4000 6811 $289,576 600 900 4000 5810 $153,473 600 600 720 600 4000 4000 6811 6811 $259,162 $269,797 Copper Bar Copper Bar 600 514 4000 6811 $289,576 Copper Bar 600 700 450 1200 4000 4000 6813 588 $324,514 $136,543 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube 700 900 4000 5810 $156,168 Alum. Diecast Ball - Grease Lube 700 720 4000 6811 $265,595 Copper Bar Sleeve - Oil Lube 700 700 600 514 4000 4000 6811 6813 $272,022 $318,087 Copper Bar Copper Bar 700 450 4000 6813 $343,801 Copper Bar 800 800 1200 900 4000 4000 5810 5810 $141,759 $173,555 800 720 4000 6811 $278,455 Copper Bar 800 600 4000 6811 $284,882 Copper Bar 800 514 4000 6813 $337,374 Copper Bar Copper Bar Self Bi-directional CGG 1RN2618-5BB40 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2623-7BE40 1RN2718-9BE40 $125,021 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-3BB40 $136,543 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-5BB40 Self Self Bi-directional Bi-directional CGG CGG 1RN2718-7BE40 1RN2721-9BE40 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-3BB40 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2623-5BB40 1RN2721-7BE40 Self Bi-directional CGG 1RN2721-9BE40 Self Bi-directional CGG 1RN2621-3BB40 Self Self Bi-directional Bi-directional CGG CGG 1RN2625-5BB40 1RN2721-7BE40 Self Bi-directional CGG 1RN2723-9BE40 Self Self Bi-directional Bi-directional CGG CGG 1RN2618-8BB40 1RN2623-3BB40 Ball - Grease Lube Self Bi-directional CGG 1RN2627-5BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2723-7BE40 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2727-9BE40 1RN2621-8BB40 Alum. Diecast Ball - Grease Lube Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-3BB40 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2721-5BE40 1RN2725-7BE40 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-9BE40 Self Bi-directional CGG 1RN2625-8BB40 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2718-3BE40 1RN2721-5BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-7BE40 Self Self Bi-directional Bi-directional CGG CGG 1RN2736-9BE40 1RN2621-6BB40 Self Bi-directional CGG 1RN2627-8BB40 Self Bi-directional CGG 1RN2721-3BE40 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2723-5BE40 1RN2734-7BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-9BE40 Self Self Bi-directional Bi-directional CGG CGG 1RN2623-6BB40 1RN2627-8BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-3BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-5BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-7BE40 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Section 1 Part 4 5 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEWAC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 4000 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD Self Bi-directional CGG 1RN2625-6BB40 Self Bi-directional CGG 1RN2632-8BE40 Self Bi-directional CGG 1RN2727-3BE40 Self Self Bi-directional Bi-directional CGG CGG 1RN2730-5BE40 1RN2621-4BB40 Ball - Grease Lube Self Bi-directional CGG 1RN2627-6BE40 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2636-8BE40 1RN2730-3BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-5BE40 Self Bi-directional CGG 1RN2625-4BB40 Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2632-6BE40 1RN2725-8BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-3BE40 Self Self Bi-directional Uni-directional CGG CGG 1RN2743-5BE40 1RN2623-2BB40 Self Bi-directional CGG 1RN2627-4BB40 Self Bi-directional CGG 1RN2636-6BE40 Self Self Bi-directional Bi-directional CGG CGG 1RN2730-8BE40 1RN2743-3BE40 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BB40 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2634-4BB40 1RN2730-6BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-8BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-3BE40 Self Self Uni-directional Bi-directional CGG CGG 1RN2623-2BB40 1RN2636-4BE40 Sleeve - Oil Lube Self Bi-directional CGG 1RN2734-6BE40 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGG CGG 1RN2741-8BE40 1RN2632-2BB40 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-4BE40 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2738-6BE40 $197,005 $268,277 Alum. Diecast Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CGG CGG 1RN2632-2BB40 1RN2727-4BE40 6813 $330,950 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-6BE40 6811 6813 $273,987 $294,062 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CGG CGG 1RN2723-2BE40 1RN2732-4BE40 4000 6813 $303,252 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2727-2BE40 4000 6813 $306,922 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-4BE40 3600 1800 4000 4000 6813 6813 $309,847 $319,773 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CGG CGG 1RN2730-2BE40 1RN2741-4BE40 4500 3600 4000 6813 $316,447 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2732-2BE40 5000 3600 4000 6813 $323,051 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2734-2BE40 HP RPM Voltage Frame 900 1200 4000 5810 $153,473 900 900 4000 5812 $189,223 Copper Bar Ball - Grease Lube 900 720 4000 6811 $284,882 Copper Bar Sleeve - Oil Lube 900 1000 600 1800 4000 4000 6811 5810 $289,576 $138,253 1000 1200 4000 5810 $173,555 Copper Bar 1000 1000 900 720 4000 4000 5812 6811 $200,238 $289,576 Copper Bar Copper Bar 1000 600 4000 6813 $324,514 Copper Bar 1250 1800 4000 5810 $153,473 1250 1250 1200 900 4000 4000 5812 6811 $189,223 $270,287 Copper Bar Copper Bar 1250 720 4000 6813 $324,514 Copper Bar 1250 1500 600 3600 4000 4000 6813 5810 $343,801 $152,953 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube 1500 1800 4000 5810 $156,168 Alum. Diecast Ball - Grease Lube 1500 1200 4000 5812 $200,238 Copper Bar Ball - Grease Lube 1500 1500 900 720 4000 4000 6811 6813 $283,150 $343,801 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube 1750 3600 4000 5810 $155,373 1750 1750 1800 1200 4000 4000 5812 6811 $175,649 $283,150 1750 900 4000 6813 $318,087 Copper Bar 1750 720 4000 6813 $349,241 Copper Bar 2000 2000 3600 1800 4000 4000 5810 5812 $166,019 $199,872 2000 1200 4000 6813 $311,660 Copper Bar 2000 2250 900 3600 4000 4000 6813 5812 $330,950 $194,064 Copper Bar Alum. Diecast 2250 1800 4000 6811 $263,449 2250 1200 4000 6813 $324,514 2500 2500 3600 1800 4000 4000 5812 6811 2500 1200 4000 3000 3000 3600 1800 4000 4000 3500 3600 3500 1800 4000 4000 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Sleeve - Oil Lube Copper Bar Ball - Grease Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 4 6 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEWAC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 6600 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BB10 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-8BB10 Self Bi-directional CGG 1RN2718-3BE10 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2718-5BE10 1RN2621-6BB10 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-8BB10 Self Self Bi-directional Bi-directional CGG CGG 1RN2718-3BE10 1RN2721-5BE10 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BB10 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-8BB10 HP RPM Voltage Frame 350 1200 6600 588 $138,814 350 900 6600 588 $135,704 350 720 6600 6811 $262,430 350 400 600 1200 6600 6600 6811 588 $262,430 $140,963 400 900 6600 588 $137,805 400 400 720 600 6600 6600 6811 6811 $266,582 $268,860 450 1200 6600 588 $143,179 450 900 6600 588 $138,814 450 450 720 600 6600 6600 6811 6811 $268,860 $273,114 450 514 6600 6811 $288,150 500 500 1200 900 6600 6600 588 5810 $145,466 $161,067 500 720 6600 6811 $273,114 Copper Bar 500 600 6600 6811 $275,290 Copper Bar 500 600 514 1200 6600 6600 6811 5810 $292,850 $156,287 600 900 6600 5810 $178,454 Copper Bar 600 600 720 600 6600 6600 6811 6811 $277,505 $288,150 Copper Bar Copper Bar 600 514 6600 6813 $327,788 700 1200 6600 5810 $173,674 700 700 900 720 6600 6600 5812 6811 700 600 6600 700 800 514 1800 6600 6600 800 1200 800 900 800 800 Copper Bar Copper Bar Copper Bar Std. Bearings & Lubrication Sleeve - Oil Lube Sleeve - Oil Lube Sleeve - Oil Lube Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2721-3BE10 1RN2721-5BE10 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-7BE10 Self Self Bi-directional Bi-directional CGG CGG 1RN2621-6BB10 1RN2627-8BB10 Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-3BE10 Sleeve - Oil Lube Self Bi-directional CGG 1RN2723-5BE10 Self Self Bi-directional Bi-directional CGG CGG 1RN2730-7BE10 1RN2625-6BB10 Ball - Grease Lube Self Bi-directional CGG 1RN2627-8BE10 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2721-3BE10 1RN2727-5BE10 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-7BE10 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2625-6BE10 $187,997 $281,717 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2630-8BE10 1RN2725-3BE10 6811 $292,709 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-5BE10 6813 588 $340,645 $135,704 Self Self Bi-directional Bi-directional CGG CGG 1RN2741-7BE10 1RN2618-4BB10 6600 5812 $187,997 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2630-6BE10 6600 5812 $194,113 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2632-8BE10 720 600 6600 6600 6811 6811 $286,174 $299,280 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2725-3BE10 1RN2732-5BE10 900 1800 6600 5810 $141,061 Self Bi-directional CGG 1RN2621-4BB10 900 900 1200 900 6600 6600 5812 6811 $194,113 $267,134 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2632-6BE10 1RN2723-8BE10 900 720 6600 6811 $292,850 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-3BE10 900 600 6600 6813 $327,788 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-5BE10 1000 1000 1800 1200 6600 6600 5810 5812 $144,588 $200,238 Self Self Bi-directional Bi-directional CGG CGG 1RN2623-4BB10 1RN2634-6BE10 1000 900 6600 6811 $273,564 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-8BE10 1000 1000 720 600 6600 6600 6813 6813 $321,355 $340,645 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2734-3BE10 1RN2741-5BE10 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Section 1 Part 4 7 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEWAC ENCLOSURE 60 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 6600 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD 1250 3600 6600 5810 $154,022 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2621-2BB10 1250 1800 6600 5810 $156,287 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-4BB10 1250 1200 6600 6811 $273,564 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-6BE10 1250 1250 900 720 6600 6600 6811 6813 $286,421 $347,072 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2730-8BE10 1RN2743-3BE10 1500 3600 6600 5810 $162,595 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BB10 1500 1500 1800 1200 6600 6600 5812 6811 $180,552 $286,421 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2634-4BB10 1RN2730-6BE10 1500 900 6600 6813 $321,355 Self Bi-directional CGG 1RN2736-8BE10 1750 3600 6600 5810 $165,168 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BB10 1750 1750 1800 1200 6600 6600 5812 6813 $183,347 $314,931 Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2634-4BB10 1RN2734-6BE10 1750 900 6600 6813 $334,218 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-8BE10 2000 2000 3600 1800 6600 6600 5812 6811 $194,064 $271,542 Alum. Diecast Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Bi-directional CGG CGG 1RN2630-2BB10 1RN2727-4BE10 2000 1200 6600 6813 $327,788 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2738-6BE10 2250 3600 6600 5812 $200,332 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG 1RN2632-2BB10 2250 2250 1800 1200 6600 6600 6811 6813 $283,542 $334,218 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2730-4BE10 1RN2741-6BE10 2500 3600 6600 6811 $277,351 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2723-2BE10 2500 3000 1800 3600 6600 6600 6813 6813 $303,763 $283,508 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGG CGG 1RN2734-4BE10 1RN2725-2BE10 3000 1800 6600 6813 $316,623 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2738-4BE10 3500 3600 6600 6813 $313,217 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2730-2BE10 3500 4000 1800 3600 6600 6600 6813 6813 $323,053 $326,409 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Bi-directional Uni-directional CGG CGG 1RN2741-4BE10 1RN2734-2BE10 Copper Bar Sleeve - Oil Lube Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 60 Hertz Basic List Prices 460 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-8LA10 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2621-3LA10 $77,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2621-5LA10 509 509 $49,844 $52,436 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2514-4LA10 1LA2518-6LA10 460 5011 $62,695 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-8LA10 460 460 588 5810 $78,923 $88,118 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2623-3LA10 1LA2625-5LA10 3600 460 509 $53,611 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2514-2LA10 1800 460 509 $51,735 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LA10 300 300 1200 900 460 460 509 5013 $54,427 $78,968 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2521-6LA10 1LA2532-8LA10 300 720 460 588 $80,105 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2623-3LA10 300 350 600 3600 460 460 5810 509 $113,174 $55,651 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CZ CZ 1LA2630-5NA10 1LA2516-2LA10 350 1800 460 509 $52,554 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LA10 350 1200 460 5011 $62,695 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-6LA10 350 350 900 720 460 460 5013 5810 $84,265 $93,973 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2537-8LA10 1LA2627-3LA10 350 600 460 Ball - Grease Lube Self Bi-directional CGZ 1LA2725-5NA10 400 400 3600 1800 460 460 509 5011 $56,532 $55,236 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2516-2LA10 1LA2518-4LA10 400 1200 460 5011 $64,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-6LA10 400 900 460 588 $78,923 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2623-8LA10 400 400 720 600 460 460 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2723-3NA10 1LA2730-5NA10 450 3600 460 509 $57,685 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2518-2LA10 450 450 1800 1200 460 460 5011 5013 $57,012 $78,968 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2521-4LA10 1LA2532-6LA10 450 900 460 5810 $93,973 Alum. Diecast Ball - Grease Lube 450 720 460 SH400 $146,288 450 500 600 3600 460 460 SH400 $152,888 5011 $64,336 500 1800 460 5011 500 500 1200 900 460 460 588 5812 500 720 460 SH400 $149,588 Copper Bar 500 600 460 SH400 $157,847 Copper Bar 600 600 3600 1800 460 460 5011 5011 600 1200 460 5810 600 600 900 720 460 460 5812 $140,920 SH450 $194,442 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube 600 600 460 SH450 $201,882 Copper Bar Ball - Grease Lube HP RPM Voltage Frame 200 900 460 509 $55,670 200 720 460 588 $77,413 200 600 460 588 250 250 1800 1200 460 460 250 900 250 250 720 600 300 300 SH400 $142,978 SH400 $139,681 SH400 $149,588 Std. Rotor Construction - Copper Bar Copper Bar Copper Bar Std. Bearings & Lubrication Self Bi-directional CZ 1LA2627-8LA10 Ball - Grease Lube Self Bi-directional CGZ 1LA2727-3NA10 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGZ CZ 1LA2732-5NA10 1LA2521-2LA10 $57,865 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LA10 $78,923 $129,298 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2623-6LA10 1LA2634-8NA10 Ball - Grease Lube Self Bi-directional CGZ 1LA2730-3NA10 Ball - Grease Lube Self Bi-directional CGZ 1LA2735-5NA10 $68,411 $60,596 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2525-2LA10 1LA2525-4LA10 $93,973 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-6LA10 Self Self Bi-directional Bi-directional CZ CGZ 1LA2641-8NA10 1LA2830-3NA10 Self Bi-directional CGZ 1LA2834-5NA10 Copper Bar Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 460 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2530-2LA10 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2532-4LA10 Ball - Grease Lube Self Bi-directional CZ 1LA2636-6NA10 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2727-8NA10 1LA2834-3NA10 SH450 $209,567 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-5NA10 5013 $96,168 SH400 $142,978 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CGZ 1LA2535-4NA10 1LA2725-6NA10 460 SH450 $194,442 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-8NA10 460 SH450 $209,567 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-3NA10 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2132-5NA10 HP RPM Voltage Frame 700 3600 460 5013 $84,539 700 1800 460 5013 $78,968 700 1200 460 5812 $133,177 Copper Bar 700 700 900 720 460 460 SH400 $146,288 SH450 $201,882 700 600 460 800 800 1800 1200 460 460 800 900 800 720 800 600 460 880 $277,207 Std. Bearings & Lubrication Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5 3 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 60 Hertz Basic List Prices 2300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2512-2LN20 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2512-4LN20 $51,527 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-6LN20 509 588 $56,642 $82,847 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2521-8LN20 1LA2616-3LN20 2300 5810 $92,885 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2625-5LN20 2300 2300 509 509 $54,579 $50,816 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2514-2LN20 1LA2514-4LN20 2300 509 $53,381 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-6LN20 2300 5011 $65,628 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-8LN20 720 600 2300 2300 588 5810 $84,528 $96,982 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2623-3LN20 1LA2627-5LN20 300 3600 2300 509 $55,443 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2514-2LN20 300 300 1800 1200 2300 2300 509 509 $52,707 $55,378 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2516-4LN20 1LA2521-6LN20 300 900 2300 5013 $79,979 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2532-8LN20 300 720 2300 5810 $92,885 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2625-3LN20 300 350 600 3600 2300 2300 SH400 $144,744 509 $56,617 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGZ CZ 1LA2725-5NN20 1LA2516-2LN20 350 1800 2300 509 $53,541 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LN20 350 350 1200 900 2300 2300 5011 5013 $63,637 $85,277 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2525-6LN20 1LA2537-8LN20 350 720 2300 5810 $100,504 Alum. Diecast Ball - Grease Lube 350 600 2300 400 400 3600 1800 2300 2300 509 5011 400 1200 2300 5011 400 400 900 720 2300 2300 400 600 2300 SH400 $154,649 Ball - Grease Lube 450 3600 2300 509 $58,651 Alum. Diecast Ball - Grease Lube 450 450 1800 1200 2300 2300 5011 5013 $57,929 $79,979 450 900 2300 5810 $98,434 450 450 720 600 2300 2300 500 3600 2300 5011 500 1800 2300 5011 500 500 1200 900 2300 2300 5013 5812 500 720 2300 SH400 $154,649 Copper Bar 500 600 2300 SH450 $207,595 Copper Bar HP RPM Voltage Frame 200 3600 2300 509 $52,548 200 1800 2300 509 $49,687 200 1200 2300 509 200 200 900 720 2300 2300 200 600 250 250 3600 1800 250 1200 250 900 250 250 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CZ 1LA2630-3LN20 Ball - Grease Lube Self Bi-directional CGZ 1LA2730-5NN20 $57,513 $56,150 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2516-2LN20 1LA2518-4LN20 $65,628 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-6LN20 5810 $96,982 SH400 $144,744 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CGZ 1LA2627-8LN20 1LA2725-3NN20 Self Bi-directional CGZ 1LA2732-5NN20 Self Uni-directional CZ 1LA2518-2LN20 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2521-4LN20 1LA2532-6LN20 Alum. Diecast Ball - Grease Lube SH400 $151,348 Copper Bar Copper Bar Self Bi-directional CZ 1LA2627-8LN20 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2730-3NN20 1LA2832-5NN20 $65,305 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2521-2LN20 $58,796 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN20 $85,277 $128,156 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2537-6LN20 1LA2632-8NN20 Ball - Grease Lube Self Bi-directional CGZ 1LA2732-3NN20 Ball - Grease Lube Self Bi-directional CGZ 1LA2836-5NN20 SH400 $151,348 SH450 $200,040 Copper Bar Copper Bar Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5 4 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 2300 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2525-2LN20 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-4LN20 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-6LN20 Bi-directional Bi-directional CZ CGZ 1LA2641-8NN20 1LA2832-3NN20 HP RPM Voltage Frame 600 3600 2300 5011 $69,380 600 1800 2300 5011 $61,510 600 1200 2300 5810 $96,982 600 600 900 720 2300 2300 5812 $143,667 SH450 $200,040 600 600 2300 SH450 $211,380 700 700 3600 1800 2300 2300 700 1200 2300 700 900 2300 700 700 720 600 2300 2300 SH450 $207,595 880 $273,796 800 3600 2300 5013 800 800 1800 1200 2300 2300 5013 5812 800 900 2300 Copper Bar 800 720 2300 880 $268,399 Copper Bar 800 900 600 3600 2300 2300 880 5810 $284,117 $129,368 900 1800 2300 5810 900 900 1200 900 2300 2300 900 720 2300 880 900 600 2300 880 1000 1000 3600 1800 2300 2300 5812 5812 1000 1200 1000 1000 900 720 1000 600 2300 1250 3600 2300 1250 1250 1800 1200 2300 2300 SH450 $196,259 SH450 $199,364 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self 1250 900 2300 880 $284,117 Copper Bar Ball - Grease Lube Self 1250 1500 720 3600 2300 2300 880 880 $299,577 $299,029 Copper Bar Copper Bar Ball - Grease Lube Self Bi-directional Sleeve - Oil Lube Flood Lube Required Uni-directional 1500 1800 2300 SH450 $199,364 Copper Bar Ball - Grease Lube Self 1500 1200 2300 SH450 $211,380 Copper Bar Ball - Grease Lube Self 1500 1500 900 720 2300 2300 880 $299,577 SH564 $434,262 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self 1750 3600 2300 $305,029 Copper Bar 1750 1750 1800 1200 2300 2300 SH450 $200,040 880 $284,117 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Bi-directional 1750 900 2300 SH562 $363,234 Copper Bar Ball - Grease Lube Self Uni-directional Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-5NN20 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2530-2LN20 1LA2530-4LN20 5013 5013 $85,604 $77,853 5812 $135,906 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2636-6NN20 SH400 $148,051 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2727-8NN20 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2836-3NN20 1LA2130-5NN20 $90,087 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2534-2LN20 $83,156 $143,667 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2535-4LN20 1LA2641-6NN20 Ball - Grease Lube Self Bi-directional CGZ 1LA2730-8NN20 Ball - Grease Lube Self Bi-directional CGZ 1LA2127-3NN20 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Uni-directional CGZ CZ 1LA2134-5NN20 1LA2627-2NN20 $117,333 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2630-4NN20 SH400 $151,348 SH450 $203,816 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2730-6NN20 1LA2834-8NN20 $278,946 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2132-3NN20 $294,426 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2138-5NN20 $164,511 $128,156 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Ball - Grease Lube Self Bi-directional CZ CZ 1LA2636-2NN20 1LA2632-4NN20 2300 SH450 $196,259 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-6NN20 2300 2300 SH450 $211,380 880 $284,117 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2838-8NN20 1LA2134-3NN20 $299,577 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-5NN20 SH450 $204,687 Copper Bar CGZ 1LA2827-2NN20 Uni-directional Bi-directional CGZ CGZ 1LA2830-4NN20 1LA2830-6NN20 Bi-directional CGZ 1LA2134-8NN20 CGZ CGZ 1LA2141-3NN20 1LA2127-2NN20 Uni-directional CGZ 1LA2830-4NN20 Bi-directional CGZ 1LA2838-6NN20 Bi-directional Uni-directional CGZ 1LA4 1LA2141-8NN20 1LA4564-3NN20 Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2130-2NN20 CGZ CGZ 1LA2832-4NN20 1LA2134-6NN20 1LA4 1LA4562-8NN20 SH400 $151,348 880 880 Sleeve - Oil Lube Flood Lube Required Uni-directional Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5 Page 5 Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 60 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 2300 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation MRPD 2000 3600 2300 880 $316,527 Copper Bar CGZ 1LA2134-2NN20 2000 1800 2300 880 $278,946 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2132-4NN20 2000 1200 2300 SH560 $330,065 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4560-6NN20 2000 2250 900 3600 2300 2300 SH564 $394,783 SH560 $335,730 Copper Bar Copper Bar Ball - Grease Lube Self Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4 1LA4564-8NN20 1LA4560-2NN20 2250 1800 2300 $294,426 Copper Bar Ball - Grease Lube Uni-directional CGZ 1LA2138-4NN20 2250 2500 1200 3600 2300 2300 SH562 $355,145 SH562 $359,998 Copper Bar Copper Bar Ball - Grease Lube Self Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4 1LA4562-6NN20 1LA4562-2NN20 2500 1800 2300 SH562 $303,370 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-4NN20 2500 1200 2300 SH564 $379,413 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-6NN20 3000 1800 2300 SH564 $340,583 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-4NN20 880 Sleeve - Oil Lube Flood Lube Required Uni-directional Type Self Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5 6 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 60 Hertz Basic List Prices 4000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2512-4LN50 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-6LN50 $58,100 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-8LN50 588 5810 $85,392 $94,469 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2623-3LN50 1LA2625-5LN50 4000 509 $56,040 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2514-2LN50 4000 4000 509 509 $52,271 $54,808 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2514-4LN50 1LA2518-6LN50 900 4000 5011 $67,052 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-8LN50 720 4000 588 $86,671 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2623-3LN50 250 300 600 3600 4000 4000 5810 509 $102,097 $56,927 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CZ CZ 1LA2630-5LN50 1LA2514-2LN50 300 1800 4000 509 $54,162 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LN50 300 300 1200 900 4000 4000 509 5013 $56,799 $81,493 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2521-6LN50 1LA2532-8LN50 300 720 4000 5810 $98,150 Alum. Diecast Ball - Grease Lube 300 600 4000 350 350 3600 1800 4000 4000 509 509 350 1200 4000 5011 350 350 900 720 4000 4000 350 600 4000 SH400 $161,371 Ball - Grease Lube 400 3600 4000 509 $58,987 Alum. Diecast Ball - Grease Lube 400 400 1800 1200 4000 4000 5011 5011 $57,525 $67,052 400 900 4000 5810 $98,150 400 400 720 600 4000 4000 450 3600 4000 509 450 1800 4000 5011 450 450 1200 900 4000 4000 5013 5810 450 720 4000 SH400 $156,415 450 500 600 3600 4000 4000 SH450 $205,636 5011 $66,763 500 1800 4000 5011 500 1200 4000 5013 500 500 900 720 4000 4000 5812 $137,271 SH400 $161,371 Copper Bar Copper Bar 500 600 4000 SH450 $209,411 Copper Bar HP RPM Voltage Frame 200 1800 4000 509 $50,371 200 1200 4000 509 $52,951 200 900 4000 509 200 200 720 600 4000 4000 250 3600 250 250 1800 1200 250 250 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CZ 1LA2627-3LN50 Ball - Grease Lube Self Bi-directional CGZ 1LA2727-5NN50 $58,069 $55,019 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2516-2LN50 1LA2516-4LN50 $65,064 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-6LN50 5013 $86,788 SH400 $146,502 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CGZ 1LA2537-8LN50 1LA2725-3NN50 Self Bi-directional CGZ 1LA2735-5NN50 Self Uni-directional CZ 1LA2516-2LN50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2518-4LN50 1LA2527-6LN50 Alum. Diecast Ball - Grease Lube SH400 $149,808 Copper Bar Copper Bar Self Bi-directional CZ 1LA2627-8LN50 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2730-3NN50 1LA2830-5NN50 $60,109 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2518-2LN50 $59,313 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN50 $81,493 $102,097 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2532-6LN50 1LA2630-8LN50 SH400 $153,105 SH450 $198,075 Copper Bar Copper Bar Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2732-3NN50 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGZ CZ 1LA2834-5NN50 1LA2521-2LN50 $60,201 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN50 $86,788 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2537-6LN50 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CGZ 1LA2636-8NN50 1LA2735-3NN50 Ball - Grease Lube Self Bi-directional CGZ 1LA2836-5NN50 Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5 7 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 4000 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2525-2LN50 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-4LN50 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-6LN50 Bi-directional Bi-directional CZ CGZ 1LA2641-8NN50 1LA2834-3NN50 HP RPM Voltage Frame 600 3600 4000 5011 $70,829 600 1800 4000 5011 $62,891 600 1200 4000 5810 $102,097 600 600 900 720 4000 4000 600 600 4000 880 $261,823 700 700 3600 1800 4000 4000 5013 5013 $87,215 $79,378 700 1200 4000 5812 $137,271 Copper Bar 700 900 4000 SH400 $149,808 Copper Bar 700 700 720 600 4000 4000 SH450 $213,196 880 $275,538 Copper Bar Copper Bar 800 3600 4000 5013 800 800 1800 1200 4000 4000 5013 5812 800 900 4000 Copper Bar 800 720 4000 880 $275,538 Copper Bar 800 900 600 3600 4000 4000 880 5810 $285,853 $131,112 900 1800 4000 5810 900 900 1200 900 4000 4000 900 720 4000 880 900 600 4000 880 1000 1000 3600 1800 4000 4000 5812 5812 1000 1200 1000 1000 900 720 1000 600 4000 1250 3600 4000 1250 1250 1800 1200 4000 4000 SH450 $198,075 SH450 $201,209 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self 1250 900 4000 880 $285,853 Copper Bar Ball - Grease Lube Self 1250 1500 720 3600 4000 4000 880 880 $301,324 $301,649 Copper Bar Copper Bar Ball - Grease Lube Self Bi-directional Sleeve - Oil Lube Flood Lube Required Uni-directional 1500 1800 4000 SH450 $201,209 Copper Bar Ball - Grease Lube Self 1500 1200 4000 SH450 $213,196 Copper Bar Ball - Grease Lube Self 1500 1500 900 720 4000 4000 880 $301,324 SH564 $438,648 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self 1750 3600 4000 $306,974 Copper Bar 1750 1750 1800 1200 4000 4000 SH450 $201,857 880 $285,853 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Bi-directional 1750 900 4000 SH562 $366,903 Copper Bar Ball - Grease Lube Self Uni-directional 5812 $145,029 SH450 $205,636 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2125-5NN50 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2530-2LN50 1LA2530-4LN50 Ball - Grease Lube Self Bi-directional CZ 1LA2636-6NN50 Ball - Grease Lube Self Bi-directional CGZ 1LA2727-8NN50 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2838-3NN50 1LA2130-5NN50 $91,695 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2534-2LN50 $84,664 $145,029 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2535-4LN50 1LA2641-6NN50 Ball - Grease Lube Self Bi-directional CGZ 1LA2735-8NN50 Ball - Grease Lube Self Bi-directional CGZ 1LA2130-3NN50 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Uni-directional CGZ CZ 1LA2134-5NN50 1LA2627-2NN50 $118,920 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2630-4NN50 SH400 $161,371 SH450 $205,636 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2735-6NN50 1LA2834-8NN50 $285,853 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-3NN50 $296,174 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2138-5NN50 $166,078 $141,156 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Ball - Grease Lube Self Bi-directional CZ CZ 1LA2636-2NN50 1LA2638-4NN50 4000 SH450 $198,075 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-6NN50 4000 4000 SH450 $213,196 880 $296,174 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2838-8NN50 1LA2138-3NN50 $301,324 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-5NN50 SH450 $206,639 Copper Bar CGZ 1LA2827-2NN50 Uni-directional Bi-directional CGZ CGZ 1LA2830-4NN50 1LA2830-6NN50 Bi-directional CGZ 1LA2134-8NN50 CGZ CGZ 1LA2141-3NN50 1LA2127-2NN50 Uni-directional CGZ 1LA2830-4NN50 Bi-directional CGZ 1LA2838-6NN50 Bi-directional Uni-directional CGZ 1LA4 1LA2141-8NN50 1LA4564-3NN50 Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2130-2NN50 CGZ CGZ 1LA2832-4NN50 1LA2134-6NN50 1LA4 1LA4562-8NN50 SH400 $161,371 880 880 Sleeve - Oil Lube Flood Lube Required Uni-directional Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5 Page 8 Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 60 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 4000 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation MRPD 2000 3600 4000 880 $318,466 Copper Bar CGZ 1LA2134-2NN50 2000 1800 4000 880 $280,694 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2132-4NN50 2000 1200 4000 SH560 $333,399 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4560-6NN50 2000 2250 900 3600 4000 4000 SH564 $398,771 SH560 $339,121 Copper Bar Copper Bar Ball - Grease Lube Self Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4 1LA4564-8NN50 1LA4560-2NN50 2250 1800 4000 $296,174 Copper Bar Ball - Grease Lube Uni-directional CGZ 1LA2138-4NN50 2250 2500 1200 3600 4000 4000 SH562 $358,732 SH562 $363,635 Copper Bar Copper Bar Ball - Grease Lube Self Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4 1LA4562-6NN50 1LA4562-2NN50 2500 1800 4000 SH562 $306,434 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-4NN50 2500 1200 4000 SH564 $383,246 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-6NN50 3000 3000 3600 1800 4000 4000 SH564 $411,846 SH564 $344,023 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Ball - Grease Lube Self Uni-directional 1LA4 1LA4 1LA4564-2NN50 1LA4564-4NN50 880 Sleeve - Oil Lube Flood Lube Required Uni-directional Type Self Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5 9 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 6600 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2621-6LN10 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2625-8LN10 Ball - Grease Lube Self Bi-directional CGZ 1LA2825-3NN10 $60,405 $60,277 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2514-2LN10 1LA2518-4LN10 $97,664 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2625-6LN10 5810 $101,171 SH450 $194,304 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CGZ 1LA2627-8LN10 1LA2825-3NN10 $62,433 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2516-2LN10 $62,056 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN10 $101,171 $105,112 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2627-6LN10 1LA2630-8LN10 HP RPM Voltage Frame 250 1200 6600 588 $90,212 250 900 6600 5810 $97,664 250 720 6600 300 300 3600 1800 6600 6600 509 5011 300 1200 6600 5810 300 300 900 720 6600 6600 350 3600 6600 509 350 1800 6600 5011 350 350 1200 900 6600 6600 5810 5810 350 720 6600 SH450 $197,428 350 400 600 3600 6600 6600 SH450 $210,632 5011 $69,670 400 1800 6600 5011 400 1200 6600 5810 400 400 900 720 6600 6600 5810 $121,938 SH450 $203,069 400 600 6600 SH450 $218,187 450 450 3600 1800 6600 6600 5011 5011 $73,745 $64,808 450 1200 6600 5810 $121,938 Copper Bar 450 900 6600 5812 $141,383 Copper Bar 450 450 720 600 6600 6600 SH450 $210,632 880 $266,673 Copper Bar Copper Bar 500 3600 6600 5013 500 500 1800 1200 6600 6600 5013 5810 500 900 6600 5812 $149,136 Copper Bar 500 720 6600 SH450 $218,187 Copper Bar 500 600 600 3600 6600 6600 880 5013 600 1800 6600 5013 600 600 1200 900 6600 6600 600 720 6600 880 600 600 6600 880 700 700 3600 1800 6600 6600 5810 5810 $134,305 $105,112 700 1200 6600 5812 $145,260 Copper Bar 700 700 900 720 6600 6600 SH400 $166,224 880 $285,703 Copper Bar Copper Bar 700 600 6600 Copper Bar SH450 $191,277 Ball - Grease Lube Self Bi-directional CGZ 1LA2825-3NN10 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGZ CZ 1LA2834-5NN10 1LA2521-2LN10 $63,853 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2523-4LN10 $105,112 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ Copper Bar 1LA2630-6LN10 Bi-directional Bi-directional CZ CGZ 1LA2630-8NN10 1LA2830-3NN10 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-5NN10 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2525-2LN10 1LA2523-4LN10 Ball - Grease Lube Self Bi-directional CZ 1LA2630-6NN10 Ball - Grease Lube Self Bi-directional CZ 1LA2636-8NN10 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2834-3NN10 1LA2125-5NN10 $90,411 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2530-2LN10 $82,404 $123,763 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2530-4LN10 1LA2630-6NN10 Ball - Grease Lube Self Bi-directional CZ 1LA2641-8NN10 Ball - Grease Lube Self Bi-directional CGZ 1LA2838-3NN10 $270,738 $94,894 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGZ CZ 1LA2125-5NN10 1LA2534-2LN10 $87,693 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2535-4LN10 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CGZ 1LA2636-6NN10 1LA2727-8NN10 $275,766 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2127-3NN10 $275,766 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2127-5NN10 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2627-2NN10 1LA2630-4LN10 Ball - Grease Lube Self Bi-directional CZ 1LA2638-6NN10 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGZ CGZ 1LA2735-8NN10 1LA2132-3NN10 Ball - Grease Lube Self Bi-directional CGZ 1LA2132-5NN10 5812 $141,383 SH400 $154,652 880 Copper Bar Std. Bearings & Lubrication $285,703 Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5 10 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 60 Hertz - 6600 Volt Basic List Prices Std. Rotor Construction 5812 $157,480 Copper Bar 5812 $133,625 Copper Bar Ball - Grease Lube Self Bi-directional 6600 SH400 $166,224 Copper Bar Ball - Grease Lube Self 900 720 6600 6600 SH450 $206,847 880 $296,018 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube 800 600 6600 880 $296,018 Copper Bar Ball - Grease Lube 900 900 3600 1800 6600 6600 5812 5812 $161,910 $137,507 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Ball - Grease Lube Self Bi-directional 900 1200 6600 SH400 $168,922 Copper Bar Ball - Grease Lube Self 900 900 6600 SH450 $218,187 Copper Bar Ball - Grease Lube Self 900 900 720 600 6600 6600 $306,339 $306,339 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self 1000 3600 6600 SH400 $175,167 Copper Bar 1000 1000 1800 1200 6600 6600 SH400 $161,259 SH450 $203,069 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional 1000 900 6600 880 $285,703 Copper Bar Ball - Grease Lube Self 1000 720 6600 880 $311,009 Copper Bar Ball - Grease Lube Self 1250 1250 3600 1800 6600 6600 SH450 $225,725 SH450 $203,069 Copper Bar Copper Bar 1250 1200 6600 $290,865 1250 1250 900 720 6600 6600 880 $301,186 SH562 $415,701 1500 3600 6600 $312,559 Copper Bar 1500 1800 6600 SH450 $206,847 Copper Bar Ball - Grease Lube Self Uni-directional 1500 1500 1200 900 6600 6600 880 $295,299 SH560 $339,811 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self 1500 720 6600 SH564 $451,808 Self 1750 1750 3600 1800 6600 6600 1750 1200 1750 900 2000 2000 HP RPM Voltage Frame 800 3600 6600 800 1800 6600 800 1200 800 800 880 880 880 880 Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD CZ 1LA2630-2NN10 CZ 1LA2632-4NN10 Bi-directional CGZ 1LA2735-6NN10 Self Self Bi-directional Bi-directional CGZ CGZ 1LA2832-8NN10 1LA2136-3NN10 Self Bi-directional CGZ 1LA2136-5NN10 CZ CZ 1LA2632-2NN10 1LA2634-4NN10 Bi-directional CGZ 1LA2735-6NN10 Bi-directional CGZ 1LA2838-8NN10 Bi-directional Bi-directional CGZ CGZ 1LA2141-3NN10 1LA2141-5NN10 CGZ 1LA2730-2NN10 CGZ CGZ 1LA2732-4NN10 1LA2830-6NN10 Bi-directional CGZ 1LA2132-8NN10 Bi-directional CGZ 1LA2141-3NN10 Sleeve - Oil Lube Flood Lube Required Uni-directional Ball - Grease Lube Self Uni-directional CGZ CGZ 1LA2834-2NN10 1LA2830-4NN10 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-6NN10 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Uni-directional CGZ 1LA4 1LA2138-8NN10 1LA4562-3NN10 Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2130-2NN10 CGZ 1LA2832-4NN10 Bi-directional Uni-directional CGZ 1LA4 1LA2134-6NN10 1LA4560-8NN10 Sleeve - Oil Lube Flood Lube Required Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional Copper Bar Ball - Grease Lube Uni-directional 1LA4 1LA4564-3NN10 $329,796 $285,703 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Ball - Grease Lube Self Uni-directional CGZ CGZ 1LA2136-2NN10 1LA2132-4NN10 6600 SH560 $336,833 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4560-6NN10 6600 SH562 $377,910 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-8NN10 3600 1800 6600 6600 SH560 $342,613 880 $290,865 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Ball - Grease Lube Self Uni-directional 1LA4 CGZ 1LA4560-2NN10 1LA2134-4NN10 2000 1200 6600 SH560 $343,401 Copper Bar Ball - Grease Lube Uni-directional 1LA4 1LA4560-6NN10 2000 2250 900 3600 6600 6600 SH564 $410,734 SH560 $349,294 Copper Bar Copper Bar Ball - Grease Lube Self Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4 1LA4564-8NN10 1LA4560-2NN10 2250 1800 6600 SH560 $295,427 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4560-4NN10 2250 1200 6600 SH562 $369,494 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-6NN10 2500 2500 3600 1800 6600 6600 SH562 $374,545 SH562 $315,628 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Ball - Grease Lube Self Uni-directional 1LA4 1LA4 1LA4562-2NN10 1LA4562-4NN10 2500 1200 6600 SH564 $394,744 Copper Bar Ball - Grease Lube Uni-directional 1LA4 1LA4564-6NN10 3000 3000 3600 1800 6600 6600 SH564 $424,201 SH564 $354,344 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Ball - Grease Lube Self Uni-directional 1LA4 1LA4 1LA4564-2NN10 1LA4564-4NN10 880 880 Self Self Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 6 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEAAC ENCLOSURE 60 Hertz Basic List Prices 460 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-3CA10 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-5CA10 Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-7CD10 $161,067 $108,637 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2627-9CD10 1RQ2616-3CA10 5810 $139,777 Alum. Diecast Ball - Grease Lube 5812 5812 $161,067 $175,500 460 588 460 5810 600 514 460 460 350 900 350 350 720 600 400 900 400 720 400 450 HP RPM Voltage Frame 200 720 460 588 $96,721 200 600 460 588 $117,616 200 514 460 5810 $144,976 200 250 450 720 460 460 5812 588 250 600 460 250 250 514 450 460 460 300 900 300 720 300 300 Std. Rotor Construction - Copper Bar Std. Bearings & Lubrication Self Uni-directional CAZ 1RQ2625-5CA10 Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2627-7CD10 1RQ2634-9CD10 $108,637 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-8CA10 $125,473 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-3CA10 5810 5812 $143,750 $175,500 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2627-5CA10 1RQ2634-7CD10 460 588 $117,616 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-8CA10 460 460 5810 5812 $139,777 $170,034 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2625-3CA10 1RQ2632-5CD10 460 588 $120,598 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-8CA10 460 5810 $143,750 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-3CA10 600 1200 460 460 5812 588 $180,043 $117,616 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2636-5CD10 1RQ2618-6CA10 450 900 460 5810 $127,588 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-8CA10 450 500 720 3600 460 460 5812 588 $170,034 $101,760 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2632-3CD10 1RQ2612-2CA10 500 1200 460 588 $120,598 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-6CA10 500 900 460 5810 $139,777 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-8CA10 500 600 720 3600 460 460 5812 5810 $175,500 $124,477 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2634-3CD10 1RQ2618-2CA10 600 1800 460 588 $117,616 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-4CA10 600 600 1200 900 460 460 5810 5812 $127,588 $162,951 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2623-6CA10 1RQ2630-8CD10 700 3600 460 5810 $126,446 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-2CA10 700 1800 460 5810 $125,473 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-4CA10 700 700 1200 900 460 460 5810 5812 $157,165 $175,500 Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2625-6CD10 1RQ2634-8CD10 800 3600 460 5810 $128,479 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-2CA10 800 800 1800 1200 460 460 5810 5812 $147,561 $161,067 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2630-4CA10 1RQ2627-6CD10 Copper Bar Copper Bar Copper Bar Copper Bar Section 1 Part 6 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEAAC ENCLOSURE 60 Hertz Basic List Prices 2300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-3CB50 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-5CB50 Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-7CE50 $168,003 $119,189 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2630-9CE50 1RQ2618-3CB50 5810 $140,177 Alum. Diecast Ball - Grease Lube 5812 5812 $168,003 $185,674 2300 588 2300 5810 600 514 2300 2300 300 450 350 350 900 720 350 350 HP RPM Voltage Frame 200 720 2300 588 $99,750 200 600 2300 588 $121,561 200 514 2300 5810 $157,564 200 250 450 720 2300 2300 5812 588 250 600 2300 250 250 514 450 2300 2300 300 900 300 720 300 300 Std. Rotor Construction - Copper Bar Std. Bearings & Lubrication Self Uni-directional CAZ 1RQ2625-5CB50 Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2630-7CE50 1RQ2636-9CE50 $119,189 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-8CB50 $127,588 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-3CB50 5810 5812 $143,863 $185,674 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2627-5CB50 1RQ2636-7CE50 2300 6811 $266,103 Self Uni-directional CAZ 1RQ2732-9CE50 2300 2300 588 5810 $121,561 $140,177 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2621-8CB50 1RQ2625-3CB50 600 2300 5812 $174,311 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-5CE50 514 2300 6811 $248,324 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-7CE50 350 400 450 900 2300 2300 6813 5810 $305,254 $127,588 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2738-9CE50 1RQ2623-8CB50 400 720 2300 5812 $168,003 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-3CE50 400 400 600 514 2300 2300 5812 6811 $185,674 $259,590 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2636-5CE50 1RQ2730-7CE50 400 450 2300 6813 $318,280 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-9CE50 450 3600 2300 588 $107,327 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB50 450 450 1200 900 2300 2300 588 5810 $119,189 $140,177 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2618-6CB50 1RQ2625-8CB50 450 720 2300 5812 $180,628 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-3CE50 450 450 600 514 2300 2300 6811 6811 $248,324 $266,103 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2725-5CE50 1RQ2732-7CE50 500 3600 2300 588 $109,025 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB50 500 1200 2300 588 $121,561 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-6CB50 500 500 900 720 2300 2300 5810 5812 $143,863 $185,674 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2627-8CB50 1RQ2636-3CE50 500 600 2300 6811 $254,829 Self Uni-directional CAZ 1RQ2727-5CE50 500 600 514 3600 2300 2300 6813 588 $305,254 $110,778 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2738-7CE50 1RQ2612-2CB50 600 1800 2300 588 $119,189 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-4CB50 600 1200 2300 5810 $127,588 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-6CB50 600 600 900 720 2300 2300 5812 6811 $174,311 $248,324 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2632-8CE50 1RQ2725-3CE50 600 600 2300 6811 $266,103 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-5CE50 600 514 2300 6813 $318,280 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-7CE50 Copper Bar Copper Bar Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Section 1 Part 6 3 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEAAC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 2300 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-2CB50 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-4CB50 Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-6CE50 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2636-8CE50 1RQ2730-3CE50 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-5CE50 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2616-2CB50 1RQ2623-4CB50 Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-6CE50 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2723-8CE50 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2734-3CE50 1RQ2743-5CE50 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB50 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2625-4CB50 1RQ2632-6CE50 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-8CE50 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-3CE50 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2621-2CB50 1RQ2627-4CB50 Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-6CE50 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2730-8CE50 1RQ2743-3CE50 Self Uni-directional CAZ 1RQ2623-2CB50 Self Uni-directional CAZ 1RQ2627-4CE50 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2734-6CE50 1RQ2738-8CE50 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-2CE50 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2636-4CE50 1RQ2738-6CE50 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-8CE50 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-2CE50 $238,006 $305,254 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2727-4CE50 1RQ2741-6CE50 5812 $195,635 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2632-2CE50 6813 6811 $267,873 $256,613 Copper Bar Copper Bar Sleeve - Oil Lube Self Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ CAZ 1RQ2732-4CE50 1RQ2723-2CE50 2300 6813 $280,906 Copper Bar Sleeve - Oil Lube Uni-directional CAZ 1RQ2736-4CE50 2300 6813 $267,265 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2725-2CE50 1800 3600 2300 2300 6813 6813 $293,932 $291,984 Copper Bar Copper Bar Sleeve - Oil Lube Self Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ CAZ 1RQ2741-4CE50 1RQ2727-2CE50 3000 1800 2300 6813 $298,332 Copper Bar Sleeve - Oil Lube CAZ 1RQ2741-4CE50 3500 4000 3600 3600 2300 2300 6813 6813 $306,105 $317,179 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ CAZB 1RQ2732-2CE50 1RQ2734-2BE50 HP RPM Voltage Frame 700 3600 2300 588 $111,710 700 1800 2300 5810 $125,473 700 1200 2300 5810 $161,256 Copper Bar 700 700 900 720 2300 2300 5812 6811 $185,674 $259,590 700 600 2300 6813 $305,254 800 800 3600 1800 2300 2300 588 5810 $116,072 $127,588 800 1200 2300 5812 $168,003 Copper Bar 800 900 2300 6811 $233,534 Copper Bar 800 800 720 600 2300 2300 6813 6813 $292,224 $318,280 Copper Bar Copper Bar 900 3600 2300 5810 $136,888 900 900 1800 1200 2300 2300 5810 5812 $140,177 $174,311 900 900 2300 6811 $240,050 Copper Bar 900 720 2300 6813 $305,254 Copper Bar 1000 1000 3600 1800 2300 2300 5810 5810 $139,054 $143,863 1000 1200 2300 5812 $185,674 Copper Bar 1000 1000 900 720 2300 2300 6811 6813 $253,080 $318,280 Copper Bar Copper Bar 1250 3600 2300 5810 $145,159 1250 1800 2300 5810 $161,256 Copper Bar Ball - Grease Lube 1250 1250 1200 900 2300 2300 6813 6813 $285,711 $298,732 Copper Bar Copper Bar 1500 3600 2300 5812 $179,405 1500 1500 1800 1200 2300 2300 5812 6813 $185,674 $298,732 1500 900 2300 6813 $311,761 1750 3600 2300 5812 $184,567 1750 1750 1800 1200 2300 2300 6811 6813 2000 3600 2300 2000 2250 1800 3600 2300 2300 2250 1800 2500 3600 2500 3000 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 6 4 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEAAC ENCLOSURE 60 Hertz Basic List Prices 4000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-3CB40 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-5CB40 Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-7CE40 $169,268 $120,549 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2630-9CE40 1RQ2618-3CB40 5810 $142,341 Alum. Diecast Ball - Grease Lube 5812 5812 $169,268 $186,942 4000 588 4000 5810 600 514 4000 4000 5812 5812 $169,268 $186,942 300 450 4000 6811 $267,133 350 350 900 720 4000 4000 588 5810 $123,750 $159,729 350 600 4000 5812 $178,101 Copper Bar 350 514 4000 6811 $249,345 Copper Bar 350 400 450 900 4000 4000 6813 5810 $308,572 $130,280 400 720 4000 5812 $169,268 Copper Bar 400 400 600 514 4000 4000 5812 6811 $186,942 $260,611 Copper Bar Copper Bar 400 450 4000 6813 $321,593 Copper Bar 450 3600 4000 588 $109,165 Alum. Diecast Ball - Grease Lube 450 450 1200 900 4000 4000 588 5810 $123,750 $142,341 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube 450 720 4000 5812 $181,896 Copper Bar 450 450 600 514 4000 4000 6811 6811 $249,345 $267,133 Copper Bar Copper Bar 500 3600 4000 588 $110,892 500 1200 4000 5810 $130,280 500 500 900 720 4000 4000 5810 5812 $145,128 $186,942 500 600 4000 6811 $255,858 500 600 514 3600 4000 4000 6813 588 $308,572 $112,675 Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube 600 1800 4000 588 $120,549 600 1200 4000 5810 $142,341 600 600 900 720 4000 4000 5812 6811 $178,101 $249,345 Copper Bar Copper Bar 600 600 4000 6811 $267,133 600 514 4000 6813 $321,593 HP RPM Voltage Frame 200 720 4000 588 $103,271 200 600 4000 588 $123,750 200 514 4000 5810 $159,729 200 250 450 720 4000 4000 5812 588 250 600 4000 250 250 514 450 4000 4000 300 900 300 720 300 300 Std. Rotor Construction - Copper Bar Std. Bearings & Lubrication Self Uni-directional CAZ 1RQ2625-5CB40 Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2630-7CE40 1RQ2636-9CE40 $120,549 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-8CB40 $130,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-3CB40 Copper Bar Copper Bar Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2630-5CE40 1RQ2636-7CE40 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-9CE40 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2621-8CB40 1RQ2625-3CE40 Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-5CE40 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-7CE40 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2738-9CE40 1RQ2623-8CB40 Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-3CE40 Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2636-5CE40 1RQ2730-7CE40 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-9CE40 Self Uni-directional CAZ 1RQ2612-2CB40 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2621-6CB40 1RQ2625-8CB40 Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-3CE40 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2725-5CE40 1RQ2732-7CE40 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB40 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-6CB40 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2627-8CB40 1RQ2636-3CE40 Self Uni-directional CAZ 1RQ2727-5CE40 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2738-7CE40 1RQ2612-2CB40 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-4CB40 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-6CB40 Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2632-8CE40 1RQ2725-3CE40 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-5CE40 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-7CE40 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Section 1 Part 6 5 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEAAC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 4000 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-2CB40 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-4CB40 Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-6CE40 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2636-8CE40 1RQ2730-3CE40 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-5CE40 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2616-2CB40 1RQ2623-4CB40 Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-6CE40 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2723-8CE40 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2734-3CE40 1RQ2743-5CE40 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-2CB40 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2625-4CB40 1RQ2632-6CE40 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-8CE40 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-3CE40 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2621-2CB40 1RQ2627-4CB40 Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-6CE40 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2730-8CE40 1RQ2743-3CE40 Self Uni-directional CAZ 1RQ2623-2CB40 Self Uni-directional CAZ 1RQ2627-4CE40 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2734-6CE40 1RQ2738-8CE40 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-2CE40 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2636-4CE40 1RQ2738-6CE40 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-8CE40 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-2CE40 $239,035 $308,572 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2727-4CE40 1RQ2741-6CE40 6811 $250,661 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2721-2CE40 6813 6811 $271,192 $257,732 Copper Bar Copper Bar Sleeve - Oil Lube Self Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ CAZ 1RQ2732-4CE40 1RQ2723-2CE40 4000 6813 $284,218 Copper Bar Sleeve - Oil Lube Uni-directional CAZ 1RQ2736-4CE40 4000 6813 $270,853 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2725-2CE40 1800 3600 4000 4000 6813 6813 $297,251 $295,578 Copper Bar Copper Bar Sleeve - Oil Lube Self Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ CAZ 1RQ2741-4CE40 1RQ2727-2CE40 3000 1800 4000 6813 $301,701 Copper Bar Sleeve - Oil Lube CAZ 1RQ2741-4CE40 3500 4000 3600 3600 4000 4000 6813 6813 $309,696 $320,764 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ CAZB 1RQ2732-2CE40 1RQ2734-2BE40 HP RPM Voltage Frame 700 3600 4000 588 $113,542 700 1800 4000 5810 $126,646 700 1200 4000 5810 $162,518 Copper Bar 700 700 900 720 4000 4000 5812 6811 $186,942 $260,611 700 600 4000 6813 $308,572 800 800 3600 1800 4000 4000 588 5810 $118,150 $130,280 800 1200 4000 5812 $169,268 Copper Bar 800 900 4000 6811 $234,560 Copper Bar 800 800 720 600 4000 4000 6813 6813 $295,540 $321,593 Copper Bar Copper Bar 900 3600 4000 5810 $133,530 900 900 1800 1200 4000 4000 5810 5812 $142,341 $178,101 900 900 4000 6811 $241,077 Copper Bar 900 720 4000 6813 $308,572 Copper Bar 1000 1000 3600 1800 4000 4000 5810 5810 $139,386 $145,128 1000 1200 4000 5812 $186,942 Copper Bar 1000 1000 900 720 4000 4000 6811 6813 $254,103 $321,593 Copper Bar Copper Bar 1250 3600 4000 5810 $148,202 1250 1800 4000 5810 $162,518 Copper Bar Ball - Grease Lube 1250 1250 1200 900 4000 4000 6813 6813 $289,024 $302,050 Copper Bar Copper Bar 1500 3600 4000 5812 $185,863 1500 1500 1800 1200 4000 4000 5812 6813 $186,942 $302,050 1500 900 4000 6813 $315,080 1750 3600 4000 5812 $188,804 1750 1750 1800 1200 4000 4000 6811 6813 2000 3600 4000 2000 2250 1800 3600 4000 4000 2250 1800 2500 3600 2500 3000 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 6 6 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEAAC ENCLOSURE 60 Hertz Basic List Prices 6600 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-6CB10 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-8CB10 $111,520 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB10 588 5810 $128,046 $133,189 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2621-6CB10 1RQ2623-8CB10 6600 6811 $263,935 Self Uni-directional CAZ 1RQ2730-7CE10 6600 6600 588 588 $113,285 $107,832 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2612-2CB10 1RQ2612-4CB10 6600 588 $130,060 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-6CB10 6600 5810 $150,180 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-8CB10 720 600 6600 6600 6811 6811 $233,121 $252,664 350 514 6600 6813 $298,855 400 400 3600 1800 6600 6600 588 588 $115,106 $109,502 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube 400 1200 6600 5810 $145,256 Alum. Diecast Ball - Grease Lube 400 900 6600 5810 $167,567 Copper Bar Ball - Grease Lube 400 400 720 600 6600 6600 6811 6811 $239,634 $263,935 Copper Bar Copper Bar 400 514 6600 6813 $311,888 Copper Bar 450 450 3600 1800 6600 6600 588 588 $116,987 $111,256 450 1200 6600 5810 $162,646 Copper Bar 450 900 6600 5810 $170,161 Copper Bar 450 450 720 600 6600 6600 6811 6811 $252,664 $270,445 450 514 6600 6813 $324,909 500 500 3600 1800 6600 6600 588 588 $119,240 $114,213 500 1200 6600 5810 $167,567 Copper Bar 500 900 6600 5812 $174,311 Copper Bar 500 500 720 600 6600 6600 6811 6813 $259,177 $305,372 Copper Bar Copper Bar 600 3600 6600 588 $120,508 600 600 1800 1200 6600 6600 5810 5812 $146,951 $174,311 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube 600 900 6600 5812 $191,988 Copper Bar 600 720 6600 6811 $270,445 Copper Bar 600 700 600 3600 6600 6600 6813 5810 $324,909 $134,620 700 1800 6600 5810 $150,579 Copper Bar 700 700 1200 900 6600 6600 5812 6811 $186,942 $244,395 Copper Bar Copper Bar 700 720 6600 6813 $311,888 Copper Bar HP RPM Voltage Frame 250 1200 6600 588 $126,095 250 900 6600 588 $122,881 300 3600 6600 588 300 300 1200 900 6600 6600 300 514 350 350 3600 1800 350 1200 350 900 350 350 Std. Rotor Construction - Copper Bar Std. Bearings & Lubrication Sleeve - Oil Lube Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2718-3CE10 1RQ2725-5CE10 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2734-7CE10 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2612-2CB10 1RQ2612-4CB10 Self Uni-directional CAZ 1RQ2625-6CB10 Self Uni-directional CAZ 1RQ2627-8CE10 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2721-3CE10 1RQ2730-5CE10 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-7CE10 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2612-2CB10 1RQ2614-4CB10 Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-6CE10 Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-8CE10 Copper Bar Copper Bar Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2725-3CE10 1RQ2732-5CE10 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-7CE10 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2614-2CB10 1RQ2616-4CB10 Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-6CE10 Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-8CE10 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2727-3CE10 1RQ2736-5CE10 Self Uni-directional CAZ 1RQ2616-2CB10 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2621-4CE10 1RQ2630-6CE10 Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-8CE10 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-3CE10 Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2743-5CE10 1RQ2618-2CB10 Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-4CE10 Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2634-6CE10 1RQ2725-8CE10 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-3CE10 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Copper Bar Sleeve - Oil Lube Alum. Diecast Ball - Grease Lube Section 1 Part 6 7 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEAAC ENCLOSURE 60 Hertz Basic List Prices Std. Rotor Construction - 6600 Volt Std. Bearings & Lubrication Std. Bearing Cooling Rotation Type MRPD Self Uni-directional CAZ 1RQ2621-2CB10 Self Uni-directional CAZ 1RQ2625-4CE10 Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2723-6CE10 Sleeve - Oil Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2727-8CE10 1RQ2743-3CE10 HP RPM Voltage Frame 800 3600 6600 5810 $142,349 800 1800 6600 5810 $162,646 Copper Bar Ball - Grease Lube 800 1200 6600 6811 $237,885 Copper Bar 800 800 900 720 6600 6600 6811 6813 $250,906 $324,909 Copper Bar Copper Bar 900 3600 6600 5810 $144,601 900 900 1800 1200 6600 6600 5810 6811 $167,567 $244,395 Copper Bar Copper Bar Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB10 Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2627-4CE10 1RQ2725-6CE10 900 900 6600 6811 $257,425 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-8CE10 1000 3600 6600 5810 $168,950 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-2CE10 1000 1000 1800 1200 6600 6600 5812 6811 $186,942 $257,425 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2634-4CE10 1RQ2730-6CE10 1000 900 6600 6813 $298,855 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2736-8CE10 1250 1250 3600 1800 6600 6600 5812 5812 $180,442 $189,836 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2625-2CE10 1RQ2634-4CE10 1250 1200 6600 6813 $298,855 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2736-6CE10 1250 900 6600 6813 $311,888 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-8CE10 1500 1500 3600 1800 6600 6600 5812 6811 $192,302 $257,425 Copper Bar Copper Bar Ball - Grease Lube Sleeve - Oil Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2632-2CE10 1RQ2730-4CE10 1500 1200 6600 6813 $311,888 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-6CE10 1750 1750 3600 1800 6600 6600 6811 6813 $261,332 $281,027 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Sleeve - Oil Lube Self Uni-directional CAZ CAZ 1RQ2723-2CE10 1RQ2734-4CE10 2000 3600 6600 6811 $265,575 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2723-2CE10 2000 1800 6600 6813 $294,050 Copper Bar Sleeve - Oil Lube Uni-directional CAZ 1RQ2738-4CE10 2250 2250 3600 1800 6600 6600 6813 6813 $274,457 $300,566 Copper Bar Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional Sleeve - Oil Lube Self Uni-directional CAZ CAZ 1RQ2725-2CE10 1RQ2741-4CE10 2500 3600 6600 6813 $299,176 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2727-2CE10 2500 3000 1800 3600 6600 6600 6813 6813 $305,066 $320,351 Copper Bar Copper Bar Sleeve - Oil Lube Self Uni-directional Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ CAZ 1RQ2741-4CE10 1RQ2734-2CE10 Self Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 1A 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 50 Hertz Basic List Prices 3300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB00 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-6BB00 $53,265 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-8BB00 508 508 $49,669 $47,127 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2508-2BB00 1RA2512-4BB00 3300 508 $49,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-6BB00 3300 3300 5010 508 $62,363 $52,082 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2523-8BB00 1RA2511-2BB00 1500 3300 508 $49,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB00 1000 3300 508 $51,345 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB00 300 350 750 3000 3300 3300 5010 508 $82,029 $52,889 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2530-8BE00 1RA2511-2BB00 350 1500 3300 508 $50,153 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB00 350 350 1000 750 3300 3300 508 588 $53,265 $62,131 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-6BB00 1RA2614-8BB00 400 3000 3300 508 $53,720 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB00 400 1500 3300 508 $51,345 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB00 400 400 1000 750 3300 3300 508 588 $56,003 $70,470 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2521-6BB00 1RA2616-8BB00 450 3000 3300 508 $55,256 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB00 450 450 1500 1000 3300 3300 508 5010 $53,265 $62,363 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-4BB00 1RA2523-6BB00 450 750 3300 588 $78,881 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB00 500 3000 3300 508 $56,111 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB00 500 500 1500 1000 3300 3300 508 5010 $54,063 $66,171 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-4BB00 1RA2527-6BB00 500 750 3300 588 $81,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB00 600 600 3000 1500 3300 3300 508 5010 $59,604 $60,676 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2515-2BB00 1RA2521-4BB00 600 1000 3300 588 $81,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB00 600 750 3300 5810 $98,921 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB00 700 700 3000 1500 3300 3300 5010 5010 $68,027 $66,171 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2516-2BB00 1RA2527-4BB00 700 1000 3300 5810 $87,207 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-6BB00 700 800 750 3000 3300 3300 5810 5010 $101,616 $71,201 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2627-8BB00 1RA2518-2BB00 800 1500 3300 5810 $83,701 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB00 800 1000 3300 5810 $98,921 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-6BB00 800 900 750 3000 3300 3300 5812 5010 $128,549 $74,375 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2630-8BE00 1RA2521-2BB00 900 1500 3300 5810 $87,207 Alum. Diecast Ball - Grease Lube 900 900 1000 750 3300 3300 5812 5812 $128,549 $145,686 1000 3000 3300 5010 1000 1500 3300 5810 1000 1000 3300 5812 $130,539 HP RPM Voltage Frame 200 3000 3300 508 $48,912 200 1000 3300 508 $47,127 200 750 3300 508 250 250 3000 1500 3300 3300 250 1000 250 300 750 3000 300 300 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2623-4BB00 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2630-6BE00 1RA2636-8BE00 $77,546 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2523-2BB00 $98,921 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB00 Self Bi-directional CG 1RA2630-6BE00 Copper Bar Copper Bar Copper Bar Ball - Grease Lube Section 1 Part 1A 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 50 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 3300 Volt Std. Bearings & Lubrication Alum. Diecast Ball - Grease Lube Std. Bearing Cooling Rotation Type MRPD 1250 3000 3300 5810 $89,698 Self Uni-directional CG 1RA2618-2BB00 1250 1500 3300 5812 $128,180 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-4BE00 1250 1000 3300 5812 $134,671 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE00 1500 1500 3000 1500 3300 3300 5810 5812 $114,978 $145,320 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2623-2BE00 1RA2636-4BE00 1500 1000 3300 5812 $145,686 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-6BE00 1750 3000 3300 5812 $133,626 Copper Bar Ball - Grease Lube Self Uni-directional CG 1RA2625-2BE00 Section 1 Part 1A 3 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features ODP ENCLOSURE 50 Hertz Basic List Prices 6000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB60 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB60 $59,518 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB60 5010 508 $64,799 $63,866 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2521-4BB60 1RA2515-2BB60 6000 5010 $65,769 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BB60 6000 6000 5010 5010 $69,247 $66,481 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2516-2BB60 1RA2523-4BB60 3000 6000 5010 $70,319 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB60 1500 6000 5010 $68,460 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-4BB60 700 700 3000 1500 6000 6000 5010 5810 $75,463 $86,509 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2518-2BB60 1RA2621-4BB60 800 3000 6000 5810 $90,748 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2618-2BB60 800 900 1500 3000 6000 6000 5810 5810 $90,037 $92,184 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2623-4BB60 1RA2618-2BB60 HP RPM Voltage Frame 300 1500 6000 508 $53,537 350 1500 6000 508 $55,463 400 3000 6000 508 400 450 1500 3000 6000 6000 450 1500 500 500 3000 1500 600 600 Std. Rotor Construction - Std. Bearings & Lubrication 900 1500 6000 5810 $101,735 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB60 1000 3000 6000 5810 $98,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2621-2BB60 1000 1250 1500 3000 6000 6000 5810 5810 $106,515 $99,835 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2627-4BB60 1RA2621-2BB60 1250 1500 6000 5812 $145,320 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-4BE60 1500 1750 3000 3000 6000 6000 5810 5812 $124,620 $149,922 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CG CG 1RA2623-2BE60 1RA2630-2BE60 Section 1 Part 2A 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 50 Hertz Basic List Prices 3300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB00 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-6BB00 $53,956 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-8BB00 508 508 $50,393 $47,817 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2508-2BB00 1RA2512-4BB00 3300 508 $50,103 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-6BB00 3300 3300 5010 508 $63,053 $52,796 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2523-8BB00 1RA2511-2BB00 1500 3300 508 $50,103 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB00 1000 3300 508 $52,035 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB00 300 350 750 3000 3300 3300 5010 508 $82,720 $53,613 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2530-8BE00 1RA2511-2BB00 350 1500 3300 508 $50,853 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB00 350 350 1000 750 3300 3300 508 588 $53,956 $63,607 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-6BB00 1RA2614-8BB00 400 3000 3300 508 $54,456 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB00 400 1500 3300 508 $52,035 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB00 400 400 1000 750 3300 3300 508 588 $56,693 $71,945 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2521-6BB00 1RA2616-8BB00 450 3000 3300 508 $55,970 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB00 450 450 1500 1000 3300 3300 508 5010 $53,956 $63,053 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-4BB00 1RA2523-6BB00 450 750 3300 588 $80,357 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB00 500 3000 3300 508 $56,836 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB00 500 500 1500 1000 3300 3300 508 5010 $54,763 $66,861 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2518-4BB00 1RA2527-6BB00 500 750 3300 588 $83,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB00 600 600 3000 1500 3300 3300 508 5010 $60,317 $61,366 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2515-2BB00 1RA2521-4BB00 600 1000 3300 588 $83,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB00 600 750 3300 5810 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB00 700 700 3000 1500 3300 3300 5010 5010 $68,741 $66,861 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2516-2BB00 1RA2527-4BB00 700 1000 3300 5810 $88,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-6BB00 700 800 750 3000 3300 3300 5810 5010 $103,091 $71,915 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2627-8BB00 1RA2518-2BB00 800 1500 3300 5810 $85,177 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB00 800 1000 3300 5810 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-6BB00 800 900 750 3000 3300 3300 5812 5010 $130,024 $75,088 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2630-8BE00 1RA2521-2BB00 900 1500 3300 5810 $88,683 Alum. Diecast Ball - Grease Lube 900 900 1000 750 3300 3300 5812 5812 $130,024 $147,162 1000 3000 3300 5010 1000 1500 3300 5810 1000 1000 3300 5812 $132,037 HP RPM Voltage Frame 200 3000 3300 508 $49,625 200 1000 3300 508 $47,817 200 750 3300 508 250 250 3000 1500 3300 3300 250 1000 250 300 750 3000 300 300 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CG 1RA2623-4BB00 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CG CG 1RA2630-6BE00 1RA2636-8BE00 $78,259 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2523-2BB00 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB00 Self Bi-directional CG 1RA2630-6BE00 Copper Bar Copper Bar Copper Bar Ball - Grease Lube Section 1 Part 2A 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 50 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 3300 Volt Std. Bearings & Lubrication Alum. Diecast Ball - Grease Lube Std. Bearing Cooling Rotation Type MRPD 1250 3000 3300 5810 $91,206 Self Uni-directional CG 1RA2618-2BB00 1250 1500 3300 5812 $129,655 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-4BE00 1250 1000 3300 5812 $136,146 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE00 1500 1500 3000 1500 3300 3300 5810 5812 $116,486 $146,796 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2623-2BE00 1RA2636-4BE00 1500 1000 3300 5812 $147,162 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-6BE00 1750 3000 3300 5812 $135,134 Copper Bar Ball - Grease Lube Self Uni-directional CG 1RA2625-2BE00 Section 1 Part 2A 3 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPI ENCLOSURE 50 Hertz Basic List Prices 6000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB60 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB60 $60,232 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB60 5010 508 $65,490 $64,579 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2521-4BB60 1RA2515-2BB60 6000 5010 $66,470 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BB60 6000 6000 5010 5010 $69,960 $67,171 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2516-2BB60 1RA2523-4BB60 3000 6000 5010 $71,043 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB60 1500 6000 5010 $69,150 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-4BB60 700 700 3000 1500 6000 6000 5010 5810 $76,177 $87,985 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CG CG 1RA2518-2BB60 1RA2621-4BB60 800 3000 6000 5810 $92,255 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2618-2BB60 800 900 1500 3000 6000 6000 5810 5810 $91,512 $93,715 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2623-4BB60 1RA2618-2BB60 HP RPM Voltage Frame 300 1500 6000 508 $54,227 350 1500 6000 508 $56,153 400 3000 6000 508 400 450 1500 3000 6000 6000 450 1500 500 500 3000 1500 600 600 Std. Rotor Construction - Std. Bearings & Lubrication 900 1500 6000 5810 $103,210 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB60 1000 3000 6000 5810 $99,788 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2621-2BB60 1000 1250 1500 3000 6000 6000 5810 5810 $107,991 $101,367 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CG CG 1RA2627-4BB60 1RA2621-2BB60 1250 1500 6000 5812 $146,796 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-4BE60 1500 1750 3000 3000 6000 6000 5810 5812 $126,128 $151,430 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CG CG 1RA2623-2BE60 1RA2630-2BE60 Section 1 Part 3A 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 50 Hertz Basic List Prices 3300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB00 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-6BB00 $57,847 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-8BB00 508 508 $54,477 $51,708 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2508-2BB00 1RP2512-4BB00 3300 508 $53,994 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-6BB00 3300 3300 5010 508 $66,944 $56,817 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2523-8BB00 1RP2511-2BB00 1500 3300 508 $53,994 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB00 1000 3300 508 $55,926 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-6BB00 300 350 750 3000 3300 3300 5010 508 $86,611 $57,697 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2530-8BE00 1RP2511-2BB00 350 1500 3300 508 $54,802 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB00 350 350 1000 750 3300 3300 508 588 $57,847 $68,994 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2518-6BB00 1RP2614-8BB00 400 3000 3300 508 $58,604 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB00 400 1500 3300 508 $55,926 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB00 400 400 1000 750 3300 3300 508 588 $60,584 $77,332 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2521-6BB00 1RP2616-8BB00 450 3000 3300 508 $59,991 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB00 450 450 1500 1000 3300 3300 508 5010 $57,847 $66,944 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2518-4BB00 1RP2523-6BB00 450 750 3300 588 $85,744 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-8BB00 500 3000 3300 508 $60,920 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB00 500 500 1500 1000 3300 3300 508 5010 $58,713 $70,752 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2518-4BB00 1RP2527-6BB00 500 750 3300 588 $88,854 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-8BB00 600 600 3000 1500 3300 3300 508 5010 $64,338 $65,257 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2515-2BB00 1RP2521-4BB00 600 1000 3300 588 $88,854 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB00 600 750 3300 5810 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-8BB00 700 700 3000 1500 3300 3300 5010 5010 $72,762 $70,752 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2516-2BB00 1RP2527-4BB00 700 1000 3300 5810 $94,070 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-6BB00 700 800 750 3000 3300 3300 5810 5010 $108,479 $75,936 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2627-8BB00 1RP2518-2BB00 800 1500 3300 5810 $90,564 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-4BB00 800 1000 3300 5810 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-6BB00 800 900 750 3000 3300 3300 5812 5010 $135,412 $79,110 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2630-8BE00 1RP2521-2BB00 900 1500 3300 5810 $94,070 Alum. Diecast Ball - Grease Lube 900 900 1000 750 3300 3300 5812 5812 $135,412 $152,549 1000 3000 3300 5010 1000 1500 3300 5810 1000 1000 3300 5812 $137,508 HP RPM Voltage Frame 200 3000 3300 508 $53,646 200 1000 3300 508 $51,708 200 750 3300 508 250 250 3000 1500 3300 3300 250 1000 250 300 750 3000 300 300 Std. Rotor Construction - Std. Bearings & Lubrication Self Bi-directional CGII 1RP2623-4BB00 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGII CGII 1RP2630-6BE00 1RP2636-8BE00 $82,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2523-2BB00 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-4BB00 Self Bi-directional CGII 1RP2630-6BE00 Copper Bar Copper Bar Copper Bar Ball - Grease Lube Section 1 Part 3A 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 50 Hertz HP RPM Voltage Frame Basic List Prices Std. Rotor Construction - 3300 Volt Std. Bearings & Lubrication Alum. Diecast Ball - Grease Lube Std. Bearing Cooling Rotation Type MRPD 1250 3000 3300 5810 $96,710 Self Uni-directional CGII 1RP2618-2BB00 1250 1500 3300 5812 $135,043 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2630-4BE00 1250 1000 3300 5812 $141,534 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-6BE00 1500 1500 3000 1500 3300 3300 5810 5812 $121,991 $152,183 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2623-2BE00 1RP2636-4BE00 1500 1000 3300 5812 $152,549 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-6BE00 1750 3000 3300 5812 $140,639 Copper Bar Ball - Grease Lube Self Uni-directional CGII 1RP2625-2BE00 Section 1 Part 3A 3 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features WPII ENCLOSURE 50 Hertz Basic List Prices 6000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB60 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB60 $64,253 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB60 5010 508 $69,381 $68,601 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2521-4BB60 1RP2515-2BB60 6000 5010 $70,419 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-4BB60 6000 6000 5010 5010 $73,982 $71,062 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2516-2BB60 1RP2523-4BB60 3000 6000 5010 $75,127 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BB60 1500 6000 5010 $73,041 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2525-4BB60 700 700 3000 1500 6000 6000 5010 5810 $80,198 $93,372 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGII CGII 1RP2518-2BB60 1RP2621-4BB60 800 3000 6000 5810 $97,760 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2618-2BB60 800 900 1500 3000 6000 6000 5810 5810 $96,899 $99,307 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2623-4BB60 1RP2618-2BB60 HP RPM Voltage Frame 300 1500 6000 508 $58,118 350 1500 6000 508 $60,044 400 3000 6000 508 400 450 1500 3000 6000 6000 450 1500 500 500 3000 1500 600 600 Std. Rotor Construction - Std. Bearings & Lubrication 900 1500 6000 5810 $108,598 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-4BB60 1000 3000 6000 5810 $105,293 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2621-2BB60 1000 1250 1500 3000 6000 6000 5810 5810 $113,378 $106,959 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGII CGII 1RP2627-4BB60 1RP2621-2BB60 1250 1500 6000 5812 $152,183 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2634-4BE60 1500 1750 3000 3000 6000 6000 5810 5812 $131,632 $156,935 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CGII CGII 1RP2623-2BE60 1RP2630-2BE60 Section 1 Part 4A 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEWAC ENCLOSURE 50 Hertz Basic List Prices 3300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2614-8BB00 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-8BB00 $133,433 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-8BB00 588 588 $136,543 $136,543 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2621-8BB00 1RN2621-6BB00 3300 5810 $153,473 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-8BB00 3300 3300 5810 5810 $141,759 $156,168 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2623-6BB00 1RN2627-8BB00 1500 3300 5810 $138,253 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-4BB00 1000 3300 5810 $153,473 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-6BB00 800 900 750 1500 3300 3300 5812 5810 $183,101 $141,759 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2630-8BE00 1RN2623-4BB00 900 1000 3300 5812 $183,101 Ball - Grease Lube Self Bi-directional CGG 1RN2630-6BE00 900 1000 750 1500 3300 3300 5812 5810 $200,238 $153,473 Copper Bar Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2636-8BE00 1RN2625-4BB00 1000 1000 3300 5812 $185,935 1250 3000 3300 5810 $145,439 1250 1250 1500 1000 3300 3300 5812 5812 $182,732 $189,223 Copper Bar Copper Bar 1500 3000 3300 5810 $170,720 1500 1500 1500 1000 3300 3300 5812 5812 $199,872 $200,238 1750 3000 3300 5812 $189,368 HP RPM Voltage Frame 350 750 3300 588 $116,683 400 750 3300 588 $125,021 450 750 3300 588 500 600 750 1000 3300 3300 600 750 700 700 1000 750 800 800 Std. Rotor Construction - Copper Bar Copper Bar Std. Bearings & Lubrication Ball - Grease Lube Self Bi-directional CGG 1RN2630-6BE00 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2618-2BB00 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2630-4BE00 1RN2632-6BE00 Copper Bar Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BE00 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CGG CGG 1RN2636-4BE00 1RN2636-6BE00 Copper Bar Ball - Grease Lube Self Uni-directional CGG 1RN2625-2BE00 Section 1 Part 4A 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEWAC ENCLOSURE 50 Hertz Basic List Prices Std. Rotor Construction - 6000 Volt Std. Bearings & Lubrication HP RPM Voltage Frame 700 1500 6000 5810 $141,061 Alum. Diecast Ball - Grease Lube 800 3000 6000 5810 $146,489 Alum. Diecast Ball - Grease Lube 800 1500 6000 5810 $144,588 900 900 3000 1500 6000 6000 5810 5810 1000 3000 6000 1000 1250 1500 3000 6000 6000 1250 1500 1500 3000 1750 3000 Std. Bearing Cooling Rotation Type MRPD Self Bi-directional CGG 1RN2621-4BB60 Self Uni-directional CGG 1RN2618-2BB60 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-4BB60 $148,807 $156,287 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CGG CGG 1RN2618-2BB60 1RN2625-4BB60 5810 $154,022 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2621-2BB60 5810 5810 $161,067 $156,459 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CGG CGG 1RN2627-4BB60 1RN2621-2BB60 6000 5812 $199,872 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2634-4BE60 6000 5810 $180,361 Copper Bar Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BE60 6000 5812 $205,664 Copper Bar Ball - Grease Lube Self Uni-directional CGG 1RN2630-2BE60 Section 1 Part 5A 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 50 Hertz Basic List Prices 3300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2514-4LN00 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-6LN00 $67,052 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-8LN00 509 509 $56,040 $54,162 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2514-2LN00 1LA2516-4LN00 3300 509 $56,799 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-6LN00 3300 3300 5013 509 $86,788 $58,069 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CZ CZ 1LA2537-8LN00 1LA2516-2LN00 3300 509 $55,019 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LN00 3300 5011 $67,052 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-6LN00 750 3000 3300 3300 5810 509 $98,150 $60,109 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Uni-directional CZ CZ 1LA2627-8LN00 1LA2518-2LN00 350 1500 3300 5011 $57,525 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-4LN00 350 350 1000 750 3300 3300 5013 5810 $81,493 $102,097 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2532-6LN00 1LA2630-8LN00 400 3000 3300 5011 $66,763 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2521-2LN00 400 1500 3300 5011 $59,313 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN00 400 400 1000 750 3300 3300 5013 5810 $86,788 $103,626 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2537-6LN00 1LA2630-8LN00 450 3000 3300 5011 $68,794 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2523-2LN00 450 450 1500 1000 3300 3300 5011 5810 $62,891 $98,150 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2525-4LN00 1LA2627-6LN00 450 750 3300 5812 $133,398 Ball - Grease Lube Self Bi-directional CZ 1LA2634-8NN00 500 3000 3300 5011 $70,829 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2525-2LN00 500 500 1500 1000 3300 3300 5013 5810 $79,378 $102,097 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2530-4LN00 1LA2630-6LN00 500 750 3300 5812 $141,156 600 600 3000 1500 3300 3300 5013 5013 $91,695 $84,664 600 1000 3300 5812 $133,398 Copper Bar 600 750 3300 5812 $145,029 Copper Bar 700 700 3000 1500 3300 3300 5810 5812 $113,343 $137,271 700 1000 3300 5812 $141,156 Copper Bar 800 900 1500 1500 3300 3300 5812 5812 $141,156 $143,269 Copper Bar Copper Bar HP RPM Voltage Frame 200 1500 3300 509 $52,271 200 1000 3300 509 $54,808 200 750 3300 5011 250 250 3000 1500 3300 3300 250 1000 250 300 750 3000 300 1500 300 1000 300 350 Std. Rotor Construction - Copper Bar Copper Bar Std. Bearings & Lubrication Ball - Grease Lube Self Bi-directional CZ 1LA2638-8NN00 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2534-2LN00 1LA2535-4LN00 Ball - Grease Lube Self Bi-directional CZ 1LA2634-6NN00 Ball - Grease Lube Self Bi-directional CZ 1LA2641-8NN00 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2627-2LN00 1LA2636-4NN00 Ball - Grease Lube Self Bi-directional CZ 1LA2638-6NN00 Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2638-4NN00 1LA2638-4NN00 Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 5A 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC ENCLOSURE 50 Hertz Basic List Prices 6000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2518-2LN60 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-8LN60 $69,670 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2521-2LN60 5011 5810 $63,853 $121,938 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2523-4LN60 1LA2630-8NN60 6000 5011 $73,745 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2525-2LN60 6000 6000 5011 5810 $64,808 $101,171 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2523-4LN60 1LA2627-6LN60 750 6000 5812 $137,507 Ball - Grease Lube Self Bi-directional CZ 1LA2634-8NN60 3000 6000 5013 $90,411 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2530-2LN60 1500 1000 6000 6000 5013 5810 $80,283 $105,112 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2527-4LN60 1LA2630-6LN60 400 750 6000 5812 $145,260 Ball - Grease Lube Self Bi-directional CZ 1LA2638-8NN60 450 450 3000 1500 6000 6000 5013 5013 $94,894 $82,404 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Bi-directional CZ CZ 1LA2534-2LN60 1LA2530-4LN60 450 1000 6000 5810 $106,686 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-6LN60 500 3000 6000 5810 $106,866 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2623-2LN60 500 500 1500 1000 6000 6000 5013 5812 $87,693 $133,625 Alum. Diecast Ball - Grease Lube Copper Bar Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2535-4LN60 1LA2632-6NN60 600 3000 6000 5810 $116,539 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2627-2LN60 600 600 1500 1000 6000 6000 5812 5812 $133,625 $145,260 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Bi-directional Bi-directional CZ CZ 1LA2632-4NN60 1LA2638-6NN60 700 1500 6000 5812 $137,507 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2634-4NN60 800 1500 6000 5812 $145,260 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2638-4NN60 HP RPM Voltage Frame 250 3000 6000 5011 $67,629 250 750 6000 5810 $101,171 300 3000 6000 5011 300 300 1500 750 6000 6000 350 3000 350 350 1500 1000 350 400 400 400 Std. Rotor Construction - Copper Bar Copper Bar Std. Bearings & Lubrication Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability. Section 1 Part 6A 1 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEAAC ENCLOSURE 50 Hertz Basic List Prices 3300 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB00 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-4CB00 $113,542 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-2CB00 588 588 $120,549 $118,150 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2618-4CB00 1RQ2616-2CB00 3300 588 $122,415 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-4CB00 3300 3300 5810 5810 $133,530 $130,280 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2618-2CB00 1RQ2623-4CB00 3000 3300 5810 $139,386 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB00 1500 3300 5810 $132,297 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-4CB00 1000 1000 3000 1500 3300 3300 5810 5810 $148,202 $145,128 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2623-2CB00 1RQ2627-4CB00 1250 3000 3300 5812 $180,701 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-2CE00 1250 1500 1500 3000 3300 3300 5812 5812 $178,101 $185,863 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2632-4CE00 1RQ2632-2CE00 HP RPM Voltage Frame 500 3000 3300 588 $109,165 500 1500 3300 588 $111,878 600 3000 3300 588 600 700 1500 3000 3300 3300 700 1500 800 800 3000 1500 900 900 Std. Rotor Construction - Std. Bearings & Lubrication Section 1 Part 6A 2 Page Date 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEAAC ENCLOSURE 50 Hertz Basic List Prices 6000 Volt Std. Bearing Cooling Rotation Type MRPD Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB60 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-4CB60 $113,285 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB60 588 588 $109,502 $115,106 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2612-4CB60 1RQ2612-2CB60 6000 588 $111,256 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-4CB60 6000 6000 588 588 $119,240 $114,213 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2614-2CB60 1RQ2616-4CB60 6000 588 $120,508 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-2CB60 6000 5810 $129,561 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-4CB60 3000 1500 6000 6000 5810 5810 $134,620 $133,189 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2618-2CB60 1RQ2623-4CB60 800 3000 6000 5810 $142,349 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB60 800 900 1500 3000 6000 6000 5810 5810 $145,256 $144,601 Alum. Diecast Ball - Grease Lube Alum. Diecast Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2625-4CB60 1RQ2621-2CB60 Alum. Diecast Ball - Grease Lube HP RPM Voltage Frame 350 3000 6000 588 $111,520 350 1500 6000 588 $107,832 400 3000 6000 588 400 450 1500 3000 6000 6000 450 1500 500 500 3000 1500 600 3000 600 1500 700 700 Std. Rotor Construction - Std. Bearings & Lubrication 900 1500 6000 5810 $150,180 Self Uni-directional CAZ 1RQ2627-4CB60 1000 3000 6000 5812 $180,442 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-2CE60 1000 1250 1500 3000 6000 6000 5812 5812 $186,942 $192,302 Copper Bar Copper Bar Ball - Grease Lube Ball - Grease Lube Self Self Uni-directional Uni-directional CAZ CAZ 1RQ2634-4CE60 1RQ2632-2CE60 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Base List Prices, Frame, and Features Section Part Page Date 1 5B 1 11/12 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient TEFC Enclosure per IEEE 841 Std- 2009 (Order Code R61 / Category 2) This specification addresses motor requirements on TEFC, anti-friction bearing motors through 500 HP. The Basic List Prices in the following tables include special features of this specification which are but not limited to; IP55 degree of protection which includes rotating shaft seals to provide maximum protection against contaminants entering the motor along the shaft Minimum guaranteed full load efficiency per IEEE 841 Table 2 (See General Comment #2) Cast iron fan housing Corrosion protection of rotor Alemite grease fittings Precision balance Maximum bearing temperature limits of 50C for 2-pole, 45C for 4-pole and slower Frame breather-drain Sealed leads between motor and terminal box Max. shaft indicator reading of 0.0015-in. for direct-connected, 0.002-in. if belt drive Motor foot flatness not to exceed 0.005-in. Special nameplate and auxiliary tags Testing per paragraph 9.2 General Comments to IEEE 841- 2009 All proposals to must contain the following comments in addition to any other applicable comments and/or exceptions already taken and depending upon the quotation request; 1. Para 6.8: Taking exception to 90 dbA sound power level. Quoting typical sound pressure level in dBA as measured per NEMA MG1, Part 9 at 3 feet and at no load. Consult factory for lower noise options. 2. Para 8.0: The minimum and nominal full load efficiencies per Table 2 are based upon efficiency evaluation per IEEE 112-2004, Methods E1 or F1 with assumed stray load loss. Include Comment 3 if space heaters are quoted as a base feature or option 3. Para. 11.b: Taking exception and quoting space heaters with 160 deg. C maximum sheath temperature. Include Comment 4 if motor if a hazardous location is not specified 4. Para 3.1.e: Motor offered is based on a non-hazardous area application. Include Comment 5 if motor is not direct-connected and is to be V-belt drive 5. Para 6.1.d: Taking exception and quoting L10 life of 17,500 hours pending receipt and review of motor and driven sheave sizes as well as the size, type and number of belts. Include Comment 6 if motor is 2-pole (3600 or 3000 RPM) 6. Para 6.9: Taking exception and quoting maximum vibration of 0.10 ips unfiltered as measured on the bearing housing. Section Part Page Date Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 1 5B 2 11/12 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC Enclosure per IEEE 841 Std- 2009 - continued (Order Code R61 / Category 2) 460 Volt 200 900 509 Min. Guar. FL Eff * 93.6 Alum. Diecast Bronze Typ. Noise dBA 80 Bi-directional CZ 1LA250M-8LA10-Z 250 900 5011 93.6 $70,835 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250P-8LA10-Z 300 900 5013 – $88,119 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250S-8LA10-Z 350 1200 5011 95.0 $89,530 Copper Bar Bronze 80 Bi-directional CZ 1LA250P-6NA10-Z 350 900 5013 – $93,417 Alum. Diecast 80 Bi-directional CZ 1LA250W-8LA10-Z 400 3600 509S 95.0 $63,619 Alum. Diecast 86 Uni-directional CZ 1LA250L-2LA10-Z HP RPM Frame Basic List Price $63,810 Std. Rotor Construction Cooling Fan Rotation Type MRPD 400 1800 5011 95.4 $68,736 Alum. Diecast Bronze Conductive Plastic Bronze 85 Bi-directional CZ 1LA250P-4LA10-Z 400 1200 5011 95.0 $91,518 Copper Bar Bronze 80 Bi-directional CZ 1LA250Q-6NA10-Z 400 900 5810 – $97,591 Alum. Diecast 80 Bi-directional CZ 1LA258H-8LA10-Z 450 3600 5011S 95.0 $72,305 Alum. Diecast 85 Uni-directional CZ 1LA250N-2LA10-Z 450 1800 5011 95.4 $70,661 Alum. Diecast Bronze Conductive Plastic Bronze 85 Bi-directional CZ 1LA250P-4LA10-Z 450 1200 5013 95.0 $92,405 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250W-6LA10-Z 450 900 5810 – $105,824 Alum. Diecast 80 Bi-directional CZ 1LA258K-8LA10-Z 500 3600 5011S 95.0 $74,345 Alum. Diecast 85 Uni-directional CZ 1LA250P-2LA10-Z 500 1800 5011 95.4 $72,638 Alum. Diecast Bronze Conductive Plastic Bronze 85 Bi-directional CZ 1LA250P-4LA10-Z 500 1200 5810 95.0 $97,591 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-6LA10-Z 500 900 5812 – $141,511 Copper Bar Bronze 80 Bi-directional CZ 1LA258M-8NA10-Z *Per IEEE841-2009, Table 2. Section Part Page Date Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 1 5B 3 11/12 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC Enclosure per IEEE 841 Std- 2009 - continued (Order Code R61 / Category 2) 2300 Volt Basic List Price Std. Rotor Construction HP RPM Frame Min. Guar. FL Eff 250 3600 509S 94.1 $60,513 Alum. Diecast 250 1800 509 94.1 $57,828 250 1200 509 94.1 $61,519 250 900 5011 94.1 300 3600 509S 300 1800 300 1200 300 Cooling Fan Typ. Noise dBA Rotation Type MRPD 1LA250H-2LN20-Z 86 Uni-directional CZ Alum. Diecast Conductive Plastic Bronze 84 Bi-directional CZ 1LA250K-4LN20-Z Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-6LN20-Z $73,768 Alum. Diecast 80 Bi-directional CZ 1LA250Q-8LN20-Z 94.1 $61,377 Alum. Diecast 86 Uni-directional CZ 1LA250H-2LN20-Z 509 94.1 $60,847 Alum. Diecast Bronze Conductive Plastic Bronze 84 Bi-directional CZ 1LA250K-4LN20-Z 509 94.1 $63,518 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-6LN20-Z 900 588 94.1 $93,036 Alum. Diecast 80 Bi-directional CZ 1LA258F-8LN20-Z 350 3600 509S 94.1 $62,551 Alum. Diecast 86 Uni-directional CZ 1LA250K-2LN20-Z 350 1800 509 94.1 $61,681 Alum. Diecast Bronze Conductive Plastic Bronze 84 Bi-directional CZ 1LA250K-4LN20-Z 350 1200 5011 94.1 $71,777 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250P-6LN20-Z 350 900 588 94.1 $94,001 Alum. Diecast 80 Bi-directional CZ 1LA258G-8LN20-Z 400 3600 509S 94.1 $63,447 Alum. Diecast 86 Uni-directional CZ 1LA250K-2LN20-Z 400 1800 5011 94.1 $64,290 Alum. Diecast Bronze Conductive Plastic Bronze 85 Bi-directional CZ 1LA250L-4LN20-Z 400 1200 5011 94.1 $73,768 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250Q-6LN20-Z 400 900 5810 94.1 $106,455 Alum. Diecast 80 Bi-directional CZ 1LA258J-8LN20-Z 450 3600 509S 94.1 $64,585 Alum. Diecast 86 Uni-directional CZ 1LA250L-2LN20-Z 450 1800 5011 94.1 $66,069 Alum. Diecast Bronze Conductive Plastic Bronze 85 Bi-directional CZ 1LA250M-4LN20-Z 450 1200 5013 94.1 $90,234 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250T-6LN20-Z 450 900 5810 94.1 $107,907 Alum. Diecast 80 Bi-directional CZ 1LA258J-8LN20-Z 500 3600 5011S 94.1 $71,239 Alum. Diecast 85 Uni-directional CZ 1LA250M-2LN20-Z 500 1800 5011 94.1 $66,936 Alum. Diecast Bronze Conductive Plastic Bronze 85 Bi-directional CZ 1LA250M-4LN20-Z 500 1200 5810 94.1 $102,358 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-6LN20-Z 500 900 5812 94.1 $137,629 Copper Bar Bronze 80 Bi-directional CZ 1LA258L-8NN20-Z *Per IEEE841-2009, Table 2. Section Part Page Date Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 1 5B 4 11/12 AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient Base List Prices, Frame, and Features TEFC Enclosure per IEEE 841 Std- 2009 - continued (Order Code R61 / Category 2) 4000 Volt Basic List Price Std. Rotor Construction HP RPM Frame Min. Guar. FL Eff 250 3600 509S 94.1 $61,974 Alum. Diecast 250 1800 509 94.1 $60,407 250 1200 509 94.1 $63,170 250 900 588 94.1 300 3600 509S 300 1800 300 1200 300 Cooling Fan Typ. Noise dBA Rotation Type MRPD 1LA250H-2LN50-Z 86 Uni-directional CZ Alum. Diecast Conductive Plastic Bronze 84 Bi-directional CZ 1LA250K-4LN50-Z Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-6LN50-Z $93,187 Alum. Diecast 80 Bi-directional CZ 1LA258E-8LN50-Z 94.1 $62,861 Alum. Diecast 86 Uni-directional CZ 1LA250H-2LN50-Z 509 94.1 $62,302 Alum. Diecast Bronze Conductive Plastic Bronze 84 Bi-directional CZ 1LA250K-4LN50-Z 509 94.1 $64,939 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-6LN50-Z 900 588 94.1 $93,851 Alum. Diecast 80 Bi-directional CZ 1LA258F-8LN50-Z 350 3600 509S 94.1 $64,003 Alum. Diecast 86 Uni-directional CZ 1LA250K-2LN50-Z 350 1800 509 94.1 $63,159 Alum. Diecast Bronze Conductive Plastic Bronze 84 Bi-directional CZ 1LA250K-4LN50-Z 350 1200 5011 94.1 $73,204 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250P-6LN50-Z 350 900 588 94.1 $94,865 Alum. Diecast 80 Bi-directional CZ 1LA258G-8LN50-Z 400 3600 509S 94.1 $64,921 Alum. Diecast 86 Uni-directional CZ 1LA250L-2LN50-Z 400 1800 5011 94.1 $65,665 Alum. Diecast Bronze Conductive Plastic Bronze 85 Bi-directional CZ 1LA250L-4LN50-Z 400 1200 5011 94.1 $75,192 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250Q-6LN50-Z 400 900 5810 94.1 $107,623 Alum. Diecast 80 Bi-directional CZ 1LA258J-8LN50-Z 450 3600 509S 94.1 $66,043 Alum. Diecast 86 Uni-directional CZ 1LA250L-2LN50-Z 450 1800 5011 94.1 $67,453 Alum. Diecast Bronze Conductive Plastic Bronze 85 Bi-directional CZ 1LA250M-4LN50-Z 450 1200 5013 94.1 $93,866 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250V-6LN50-Z 450 900 5810 94.1 $111,570 Alum. Diecast 80 Bi-directional CZ 1LA258K-8LN50-Z 500 3600 5011S 94.1 $72,697 Alum. Diecast 85 Uni-directional CZ 1LA250M-2LN50-Z 500 1800 5011 94.1 $68,341 Alum. Diecast Bronze Conductive Plastic Bronze 85 Bi-directional CZ 1LA250M-4LN50-Z 500 1200 5810 94.1 $103,942 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-6LN50-Z 500 900 5812 94.1 $146,744 Copper Bar Bronze 80 Bi-directional CZ 1LA258P-8NN50-Z *Per IEEE841-2009, Table 2. Section Part Page Date 2 1 1 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Adjustable Speed Drives (Except any TEFC Enclosure or any 2-pole in a 6813 frame*) The MRPD designation for motors used with ASDs is indicated in the motor’s basic MRPD structure. Refer to the Section 1, Part MRPD for more details. Motors to be used with filtered VFDs and are 4:1 VT or are 2:1 CT have a minimum base Category 1. *Any rating in a TEFC enclosure or any 2-pole ratings in any enclosure in a 6813 frame are not suitable for use with an ASD application. Refer to your local Siemens Sales representative for price and availability. Motors driven from an adjustable frequency control power source are subject to harmonics caused by non-sinusoidal wave shapes and voltage spikes. These may result in increased heating, decreased torque capability, and excessive shaft voltages; therefore, standard motor designs may not be suitable. Refer exact requirements including application (variable or constant torque), details of speed range, and type of inverter being used to your local Siemens Sales representative for price and availability. Policy Statement IGBT/BRG Siemens Norwood AC Induction Motors IGBT Control Induced Bearing Currents Siemens has had considerable, successful experience operating motors in the field in applications that utilize IGBT-type adjustable frequency controls. Throughout the industry, however, a few variable frequency control applications and installations have been shown to produce currents in the bearings of motors they control. Siemens Drives and Siemens Systems groups have the expertise and experience necessary to ensure the your installation is configured such that problem-free operation is attained. However, when Siemens motors are to be used with controls manufactured other companies, we defer system configuration details to that control manufacturer. If the application is such that a problem due to bearing currents could potentially occur then one of the following solutions should be implemented with the motor and control system; a) Use of a control output filter that reduces common mode voltage and the motor non-drive end bearing should be insulated. b) For 500 frame and larger motors in non-hazardous locations, insulate the drive end and non-drive end bearing and add a shaft grounding brush. Unless the grounding brush is provided on the motor drive end, an insulated coupling must be utilized to protect noninsulated bearings in the load equipment. Motors constructed in accordance with (b) are available. Consult your local Siemens Sales representative for price and availability. Section Part Page Date 2 1 2 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Altitude - Above 3300 Feet Motors are designed to operate within Class B temperature rise limits when operated at rated horsepower at altitudes up to 3300 ft. Option Description From 3301 - 5000 ft elevation - Utilization to Class F Category 1 List Adder 3% For operation above 5500 ft. altitude, refer to your local Siemens Sales representative for frame size and price. Ambient Motors are designed to operate within certain maximum temperature rise limits when the motor is operated in ambient temperatures from 0 C to 40 C. For Class B rated motors, the limit is 80 C rise by resistance at 1.0 service factor. Option Description From +40oC up to +45oC - Utilization to Class F From +46oC up to +50oC - Utilization to Class F Category 1 1 List Adder 2% 4% NOTE: Sleeve bearings may require flood lubrication in an ambient above 40 degrees C. Consult your local Siemens Sales representative for determination of bearing lubrication requirement in ambient conditions above 40 degrees C. Conversely, if a sleeve bearing motor is known to be subjected to temperatures below 0C, oil sump heaters are required and should be added to price…See List Adder under Bearings - Oil Sump Heaters. Section Part Page Date 2 1 3 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories API 541 – 3rd or 4th Edition (Please refer all inquiries to your local Siemens Sales representative) API 547 – 2005 (Option Code R67 / Category 3) Motor priced and offered using the following pages will not bear the API Monogram®. A motor requiring the application of the API Monogram® requires factory approval as well as receipt and review of the load curve, load inertia, and completed data sheets. Additional costs and lead time may be incurred. I. Basic Scope Ratings (hp) # Poles Voltage (V) Mounting Enclosures Rotor Mat'l Bearings Frames 250 - 3000 4-8 2300 - 6600 Horizontal TEFC or WPII Copper > 1000 hp Sleeve 500 - 680 < 800 2 2300 - 6600 Horizontal TEFC Sleeve 500 - 580 < 1250 2 2300 - 6600 Horizontal WPII Sleeve 500 - 580 1.2 Usual Service Conditions a) -25 oC - 40 oC b) <= 3300 ft c) Indoor or outdoor, severe duty applications d) Horizontal mounting e) Installation in Div. 2 or Zone 2 locations f) Constant frequency & sign wave g) Not subject to transient voltages h) Direct coupled Aluminum Aluminum <= 1000 hp 1.3 Unusual Service Conditions a) Exposure to: 1) Combustive, explosive, abrasive or conductive dust 2) Dirt interfering with normal ventilation 3) Nuclear radiation 4) Abnormal shock or vibrations 5) Abnormal thrusts 6) Higher altitudes or ambient temperatures 7) Recip or positive displacement loads b) Voltage or frequency variations greater than NEMA c) Supply voltage unbalance greater than NEMA d) Operation at speeds other than rated speed e) VFD applications f) Load inertia greater or starting conditions worse than NEMA g) Vertical mounting Section Part Page Date 2 1 4 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories II. Siemens Standard Motor Features for API 547 - 2005 Paragraph 2.1.1 2.1.2 2.2.2.7 2.3.1 2.4.1.2 & 2.4.1.3 2.4.1.2 d. 2.4.1.3 2.4.2.2 & 2.4.2.4 2.4.2.7 2.4.4 2.4.5.2 2.4.6 2.4.7.1.1 2.4.7.2.3 2.4.7.3.1 2.4.7.4.1 2.4.9.3 2.4.10 2.4.11 3.1.1 3.2.1 3.3 3.4 4.1.2 4.1.3.1 Standard Accessory / Motor Feature Included 1.0 Service factor on sine wave 85 dB(A) @ 3 feet, unloaded, free-field, sine wave power, guaranteed (except as noted in the comments section) Maximum 650% inrush current (based on NEMA inertia, standard centrifugal loads and FV starting) Class B Temperature @ 1.0 SF by Embedded Detector (RTD) 300 series stainless steel screens Automatic drains (for TEFC motor only) Stainless steel filters & provisions for differential pressure switch (WPII enclosures only) Vertical jacking screws Mounting surface criteria a. Mounting surface machined to 250 microinches b. Same horizontal plane within 0.005" c. Foot flatness within 0.005" d. Different mounting planes within 0.002"/foot f. Mounting surface shall be machined or spot-faced to a diameter of 2x the hole diameter 300 series stainless steel hardware Copper rotor with phosphor-free braze material for >1000 hp (Aluminum die-cast for <=1000 hp) please refer to Typical Options Section for pricing of copper rotor on ratings <=1000 hp, if required by the customer. "Stiff-rotor" motor design except 2-pole, WPII in 680 frames and 2-pole TEFC in all frames Split-sleeve bearings Constant Level Oilers (All Sleeve bearings) IP55 Shaft seals - please refer to comments & exceptions section Both bearings insulated Magnetic center and end float indication C5 core plate Special nameplates adjacent to all boxes and auxiliary devices Main terminal box to have minimum dimensions based on NEMA MG1, Part 20 = ANSI Type II 100 ohm stator RTDs (2/phase) - PT100 Bearing RTDs to be supplied with sleeve bearings Low temperature (200 oC) space heaters to be supplied Routine testing – unwitnessed - includes (In addition to Siemens standard routine testing): - High-potential of stator-mounted devices - Polarization index - No-load bearing temperature stabilization run Special balancing to meet vibration limits of 0.10 ips and spectrum frequency sweeps as defined by 4.1.3.1. Ground pads Section Part Page Date 2 1 5 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories III. API 547 – 2005 List Adders & Typical Options Total Adder for API 547 - 2005 <= 1000 hp 500 Frames 580 Frames WPII List Comments $40,523 Aluminum Rotors $41,046 Aluminum Rotors $42,689 Aluminum Rotors $41,319 Copper Rotors $42,513 Copper Rotors $44,154 Copper Rotors $41,160 Copper Rotors – Standard $43,457 Copper Rotors - Standard All except 4 pole applications 4 pole applications 2 & 4 pole applications 6 pole & slower applications $47,920 $51,433 $55,969 $49,577 Aluminum Rotors Aluminum Rotors Aluminum Rotors Aluminum Rotors 2 & 4 pole applications 6 pole & slower applications 2 pole applications 4 pole & slower applications 2 pole applications 4 pole applications 6 pole & slower applications 2 pole applications 4 pole & slower applications 2 pole applications 4 pole & slower applications $55,969 $49,577 $51,328 $59,811 $51,328 $69,837 $59,811 $51,328 $58,333 Aluminum Rotors Aluminum Rotors Sleeve is standard Copper Rotors – Standard Sleeve is standard Copper Rotors – Standard Copper Rotors – Standard Sleeve is standard Copper Rotors – Standard Sleeve is standard Copper Rotors – Standard Except 588 or 5812 frames – 6 pole applications For 588 or 5812 frames – 6 pole applications > 1000 hp 500 Frames 580 Frames 680 Frames Except 588 or 5812 frames – 6 pole applications For 588 or 5812 frames – 6 pole applications Except 6811 frame – 6 pole applications For 6811 frame – 6 pole applications <= 1000 hp 500 Frames 580 Frames > 1000 hp TEFC 580 Frames SH400 Frame SH450 Frame 880 Frame SH560/SH562/SH564 Frame Typical API 547 Options: 2.4.1.3 S35 = Differential Pressure SPDT Switch 2.4.5.1.2 A02 = Vibration Probes = Bently-Nevada 2.4.5.2 R68 = Copper Rotors for <= 1000 hp 2.4.5.2 R68 = Copper Rotors for <= 1000 hp List Price $1,957 $28,196 $18,274 $21,927 Applicable Frames All Frames All Frames 500 Frames 580 Frames Testing Options: Special Tests a) Complete Test 4.1.5 b) Unbalance Response d) Sealed Winding Conformance Unwitnessed Frame Dependent Witnessed Witnessed Frame Dependent $7.656 for WPII $9,806 for TEFC $11.955 for WPII $16,252 for TEFC Unwitnessed Frame Dependent Witnessed Frame Dependent Unwitnessed Refer to Tests Section Refer to Tests Section All Frames All Frames Refer to Tests Section Refer to Tests Section Section Part Page Date 2 1 6 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories IV. Comments, Exceptions & Clarifications to API 547 - 2005 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. General: The pricing offered is for the base motor including Siemens standard routine (unwitnessed) testing. Para 1.2.a: Motors are quoted for 0 to 40oC as standard. Oil sump heaters should be added for self-lube applications o below 0 C. Para 1.2.c: Motors are not suitable for offshore or severe corrosive duty as standard. Motor paint is Siemens standard if not otherwise specified. Para 2.1.2: Refer to the Section V. Noise Levels for API 547 – 2005 and make the appropriate exception per Note 1. 5. Para 2.2.2.3: Motor design is based on a 100% Square Curve which means the connected load torque varies as the square of the speed and is equal to 100% of the rated full load torque of the motor at rated speed. This is subject to change upon receipt and review of load information. Para 2.4.1.2 TEFC) & 2.4.1.3 (WPII): If specified on Data Sheet or if installation is an offshore platform, we are taking exception to 316 stainless steel and offering 300 series stainless steel. Para 2.4.6: Refer to Section II. Siemens Standard Motor Features for API 547 – 2005 and add the following comment, “A "stiff-rotor" motor design will be supplied as the rotor does not have substantial vibration amplitude increase or shift in phase angle per resonance (natural frequency) definition in API 541, Appendix F, paragraph F.1.7.” Para 2.4.7.1.5: The bearings used on SH400, SH450, 880, SH560, SH562, or SH564 frames feature line-to-line to clearance fit by design. Para 2.4.7.2.1 (WPII only): Taking exception to IP55-rated external shaft seals. Para 2.4.7.3.1: The seals provided on TEFC motors are not split. Para 3.4: Motor space heaters are not removable. Para 4.1.2: Only stator & stator-mounted devices will be high-potential tested. Para 4.1.3.2: Non-contacting eddy current probe measurements will only be taken when the probes are purchased with the motor. If only provisions for probes are purchased, the vibration limits per paragraph 4.1.3.1 shall apply. Para 4.2.1: The motor(s) offered will be provided with Siemens standard domestic packing. The motor(s) will not receive long-term storage preparation. If long-term storage preparation is required, please advise and Siemens will offer at an additional price. If Complete Test is added as a base feature or as an option, make the following comment: “Data Sheet 2 of 3, Line 32: A no load bearing temperature run (4.1.2.h) is not provided as standard when a Complete Test is purchased. Siemens reserves the option to use the procedure per paragraph 4.3.3.10 for hot vibration evaluation." V. Noise Levels for API 547 - 2005 Low Noise Values for API 547 - Guaranteed, No-load, Free-field, 3 feet WPII Enclosures 500 Frame <= 84 dB(A) - All speeds 580 Frame <= 85 dB(A) - All speeds 680 Frame <= 85 dB(A) - 2 pole / <= 84 dB(A) – all other speeds TEFC Enclosures 500 Frame <= 90 dB(A) - 2 pole / <=85 dB(A) – all other speeds 880 Frame = 87 dB(A) - 6 pole 580 Frame <= 85 dB(A) - All speeds 880 Frame <= 85 dB(A) - 8 pole & slower SH400 Frame <= 84 dB(A) - All speeds SH560/SH562/SH564 Frame = 88 dB(A) – 2 pole 880 Frame <= 85 dB(A) - 2 pole SH560/SH562/SH564 Frame = 89 dB(A) – 4 pole 880 Frame = 91 dB(A) - 4 pole SH560/SH562/SH564 Frame <= 85 dB(A) – 6 pole & slower Notes: 1. 2. The noise levels shown above may include sound attenuation measures. Also note that due to the sound attenuation measures, the standard dimensional print may not apply. Please refer to your local Siemens Sales representative for specific dimensions. Please take appropriate exception to Para 2.1.2 of the API 547 Standard on those that are higher than 85 dB(A). Please refer to your local Siemens Sales representative for frames not listed here or for motors with separately driven blowers. Section Part Page Date 2 1 7 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Assembly As a standard, motors are supplied for horizontal, foot mounting and NEMA F-1 assembly. Code K10 K09 Option Description F-1 Assembly F-2 Assembly Category 1 1 List Adder No Charge No Charge For other mounting options, refer exact requirements to your local Siemens Sales representative price and availability. Balance – Precision Balance for Low Vibration All of our horizontal motors are designed to be within NEMA Standard vibration limits as a standard. NEMA Standards on vibration are defined in limits of unfiltered maximum velocity in inches per second (IPS) as measured on the bearing housing with motor on a rigid mounting. A precision balance with limits less than the NEMA limits is available per following chart. Motor Speed 2-Pole 4-Pole 6-Pole 8-Pole 10-Pole Code R90 Precision Balance NEMA Standard Limits .15 IPS .15 IPS .15 IPS .12 IPS .09 IPS Option Description Precision Balance Precision Balance Vibration Limits .10 IPS .10 IPS .08 IPS .07 IPS .06 IPS Category 1 List Adder $1,264 Balance - Special Two pole motors can be provided with special balance to obtain maximum vibration of 1 mil (.001 in.) peak-topeak as measured on the shaft with shaft stick or 1.5 mils peak-to-peak with velocity probes, if furnished with motor. Code R91 R91 Option Description Special Balance - 500 & 580 Frames Special Balance - All Other Frames Category 2 2 List Adder $4,619 $7,363 Section Part Page Date 2 1 8 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Bearings - Insulation Code L27 L18 L18 L18 L18 L18 Option Description Non Drive End (NDE) Bearing Insulated – 500 Frame, 2 Pole Both Bearings Insulated except 500 & 580 Frames Both Bearings Insulated – 500 Frames, 2 Pole Both Bearings Insulated – 500 Frames, 4 Pole & slower Both Bearings Insulated – 580 Frame, TEFC (CZ) Enclosure Both Bearings Insulated – 580 Frame, All enclosures except TEFC Category 1 2 2 2 2 2 List Adder $1,770 $3,386 $4,224 $2,114 $2,602 $2,719 NOTE1: Insulating both bearings is not available if motor is for belt drive application. NOTE2: NDE bearing insulated is standard for 500 Frame, 4 Pole and slower. Bearings - Lubrication Systems As a standard, anti-friction bearing motors are grease lubricated and sleeve bearing motors are oil lubricated. Other lubrication options are available as follows: Code R32 R33 L66 Option Description Oil Site Gauge Constant Level Oilers; 1/Sleeve Bearing (Oil Rite) Provisions Only for Flood Lubrication; Sleeve Bearings Category 2 2 1 List Adder $1,552 $1,661 $1,221 Bearings - Oil Sump Heaters For operation of sleeve bearing motors at ambient temperatures below 0°C, oil sump heaters in either 120V or 240V are required. Specify volts at time of order. Code R36 R36 R36 R36 Option Description Sump Heaters for Non-hazardous Areas (All Frames except 680, 880, SH560, SH562, or SH564 Frame) Sump Heaters for Non-Hazardous Areas - 680, 880, SH560, SH562, or SH564 Frame) Sump Heaters for Hazardous Areas (All Frames except 680, 880, SH560, SH562, or SH564 Frame) Sump Heaters for Hazardous Areas - 680, 880, SH560, SH562, or SH564 Frame) Category List Adder 2 $2,412 2 $4,224 2 $6,232 2 $7,437 Section Part Page Date 2 1 9 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Bearing Protective Devices - Mechanical A. Vibration Switch - Intended for use with anti-friction bearing motors. The device is mounted on the motor frame. List Adder is for mounting of one device. Code R03 R03 R05 Option Description Robertshaw Model 365-A8 Vibraswitch Robertshaw Model 365-A8 Vibraswitch - Hazardous areas PMC / Beta 440 D-R Category 2 2 2 List Adder $3,023 $6,645 $4,677 B. Seismic Devices – A vibration transducer system for measurement of acceleration or velocity is available. List Adder includes supply and mounting of one device at each bearing. List Adder for Provisions Only includes Siemens standard procedure includes a mounting block with a 2-1/2 inch diameter spot-face hole for device. Refer details of device to be used to your local Siemens Sales representative for review by factory prior to order acceptance. Code R06 R07 R08 Option Description Acceleration Transducer System – Accelerometers; Bently-Nevada Velocity Transducer System – Velometers; Bently-Nevada Provisions Only for Vibration Transducers – Siemens Standard Category 2 2 1 List Adder $8,335 $7,737 $1,264 C. Velocity Vibration Probes - For use with sleeve bearing motors only. List Adder includes installation of probes, proximeters, and cable wired to a common auxiliary terminal box. Code A02 R00 A39 R02 Option Description Two Radial Probes on Each Bearing; Bently-Nevada 3300 Series 8mm1 Installation of One Phase Monitoring Probe2 Provisions Only for up to 2 Radial Probes per Bearing Provisions Only for 1 Phase Monitoring Probe2 Category 2 3 2 3 List Adder $28,196 $8,642 $7,330 $3,356 1 Internally-mounted radial probes or provisions for them are standard for all motors except Type CZ – 580 frame and larger. When Type CZ – 580 frame and larger motors are supplied with vibration probes or provisions for vibration probes, the "BA" and "C" dimensions will increase. Consult your local Siemens Sales representative or refer to the latest version of Dimension Prints for Above NEMA Motors ANSS60000 for exact dimensions. If externally-mounted mounted probes or provisions for them are required on motors where internally-mounted is standard, refer requirements to your local Siemens Sales representative for price and availability. 2 Only available if purchased in conjunction with Code A02 – Two Radial Probes on Each Bearing. Section Part Page Date 2 1 10 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Bearing Protective Devices - Temperature Only one type of temperature device can be provided per bearing. A. Resistance Temperature Detectors Bearing RTD's are available per the following chart. Stick-type are available for either anti-friction bearing or sleeve bearings. Embedded-type are available for sleeve bearing only. Code R79 A42 B10E R76 R09 B10F R18 R20 R19 R21 R24 R26 R25 R27 R13 R22 R17 Option Description (2) 100 Ohm Platinum (0.00385 TCR) DIN Std, single-element RTDs, 3-wire, 1/brg, stick-type (2) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs, 3-wire, 1/brg, stick-type (4) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs, 1/brg, stick-type (2) 100 Ohm Platinum (0.00385 TCR) DIN Std, single-element RTDs, 3-wire, 1/brg, Embedded per API – sleeve bearings only (2) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs, 3-wire, 1/brg, Embedded per API – sleeve bearings only (4) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs, 3-wire, 2/brg, Embedded per API – sleeve bearings only (2) 10 Ohm Copper (0.00427 TCR), single-element RTDs, 3-wire, 1/brg, stick-type (2) 10 Ohm Copper (0.00427 TCR), dual-element RTDs, 3-wire, 1/brg, stick-type (2) 10 Ohm Copper (0.00427 TCR), single-element RTDs, 3-wire, 1/brg, Embedded – sleeve bearings only (2) 10 Ohm Copper (0.00427 TCR), dual-element RTDs, 3-wire, 1/brg, Embedded – sleeve bearings only (2) 120 Ohm Nickel (0.00672 TCR), single-element RTDs, 3-wire, 1/brg, stick-type (2) 120 Ohm Nickel (0.00672 TCR), dual-element RTDs, 3-wire, 1/brg, stick-type (2) 120 Ohm Nickel (0.00672 TCR), single-element RTDs, 3-wire, 1/brg, Embedded – sleeve bearings only (2) 120 Ohm Nickel (0.00672 TCR), dual-element RTDs, 3-wire, 1/brg, Embedded – sleeve bearings only Provisions only for bearing RTDs or thermocouples, 2/brg Spring loaded fittings (for bearing RTDs or thermocouples stick type only) Stainless steel shielding for bearing RTDs (available only if purchased in conjunction with Bearing RTDs) Category List Adder 2 $2,534 1 $3,060 1 $6,122 2 $4,058 2 $4,650 2 $9,299 2 $2,534 2 $3,060 2 $4,058 2 $4,650 2 $2,534 2 $3,060 2 $4,058 2 1 $4,650 $293 1 $827 2 $565 Section Part Page Date 2 1 11 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Bearing Protective Devices – Temperature (continued) B. Thermocouples Bearing thermocouples are of the dual element type in a stainless steel sheath. List Adder includes supplying one thermocouple at each bearing. Stick-type are available for either anti-friction bearing or sleeve bearings. Embedded-type are available for sleeve bearing only. Code R11 R75 R28 R29 R34 R35 R37 R38 R13 R22 Option Description (2) Type EE chromel-constantan, dual-element thermocouples, 1/brg, stick-type (2) Type EE chromel-constantan, dual-element thermocouples, 1/brg, Embedded – sleeve bearings only (2) Type JJ iron-constantan, dual-element thermocouples, 1/brg, sticktype (2) Type JJ iron-constantan, dual-element thermocouples, 1/brg, Embedded – sleeve bearings only (2) Type KK chromel-alumel, dual-element thermocouples, 1/brg, sticktype (2) Type KK chromel-alumel, dual-element thermocouples, 1/brg, Embedded – sleeve bearings only (2) Type TT copper-constantan, dual-element thermocouples, 1/brg, stick-type (2) Type TT copper-constantan, dual-element thermocouples, 1/brg, Embedded – sleeve bearings only Provisions only for bearing RTDs or thermocouples, 2/brg Spring loaded fittings (for bearing RTDs or thermocouples stick type only) Category List Adder 2 $1,560 2 $1,754 3 $1,949 3 $2,193 3 $1,949 3 $2,193 3 $1,949 3 1 $2,193 $293 1 $827 C. Thermometer – Dial-Type (For Sleeve Bearing Only) Standard dial type thermometers are available for sleeve bearing units only in all frames except SH400, SH450, 880, SH560, SH562 or SH564 frames. They are capillary-type and are available with or without contacts. Standard operating range is typically 0 C to 120 C. List Adder includes supplying one thermometer at each bearing. Code A70 A71 R13 Option Description Dial-type bearing thermometers, capillary-type, without contacts Dial-type bearing thermometers, capillary-type, with contacts Provisions Only for One (1) per Bearing Temperature Device Category 3 3 List Adder $6,884 $8,175 1 $293 D. Temperature Relay (For Sleeve Bearing Only) Standard bearing temperature relays are either indicating type or non-indicating type. List Adder includes supplying one relay at each bearing. Code R42 R41 R13 Option Description Non-indicating bearing temperature relays (Remote Display Only) Indicating bearing temperature relays (Local Display Only) Provisions Only for One (1) per Bearing Temperature Device Category 3 3 List Adder $7,745 $8,605 1 $293 Section Part Page Date 2 1 12 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Bearings - Sleeve Basic List Prices may be modified with the appropriate adder to provide sleeve bearings where anti-friction bearings are standard. Code K96 K96 K96 K96 K96 Option Description 500 Frames; Open Enclosures 580 Frames; Open & TEAAC Enclosures 500 Frames; TEFC Enclosures 580 Frames; TEFC Enclosures SH400 - SH450 – 880 – SH560 - SH562 - SH564 Frames; TEFC Enclosures Category 1 1 1 1 List Adder $6,027 $8,148 $9,996 $12,124 2 $28,200 Sleeve bearings are generally self-cooled, oil ring lubricated but some require external flood lubrication. See the following Lubrication Table for standard lubrication requirements based on a maximum 40 degrees C ambient and 60 hertz operation. Consult your local Siemens Sales representative for ambient temperatures above 40 degrees C, other than 60 hertz operation, and/or for self-cooling of bearings where flood lubrication is standard. Those units requiring flood lubrication are supplied with provisions only. Refer oil supply pressure, type of oil, and location of provisions (F1 or F2 side) to your local Siemens Sales representative for review by factory prior to order acceptance. Sleeve Bearing Lubrication Table 3600 RPM Enclosure OPEN TEFC TEAAC 500 Frame S S 588/5810 Frame S S F* 5812 Frame S F* F* 680 Frame S F* SH400 Frame F* SH450 Frame F* 880 Frame F* SH560/SH562/SH564 F Frame OPEN refers to ODP, WPI, or WPII enclosure. S = Self lubricated F* = Flood lubrication required 1800RPM OPEN S S S S - TEFC S S S S S S F* 1200 RPM and slower TEAAC S S - ALL S S S S S S S S *NOTE: Self cooling of bearings may be possible on ratings where flood lubrication is required. Refer all details to your local Siemens Sales representative for price and availability. Section Part Page Date 2 1 13 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Belt Drive Applications Motors to be used on belt drive applications have a larger shaft extension diameter and length than direct drive motors and have a roller bearing on the drive end. Motors with a ball bearing on the drive end should not be used on belt drive applications. Conversely, it is not recommended that motors with a roller bearing on the drive end be direct driven as excessive noise may occur. The chart indicates the minimum sheave diameters in inches recommended for belt drive motors in 500 and 580 frames. The adder can only be made to the ratings listed in the chart. For any drive applications falling outside of chart limitation, refer exact requirements to your local Siemens Sales representative for review by factory for price and availability. (List Adder does not include slide rails, see Soleplates/Slide Rails for appropriate addition.) Code R92 HP 200 250 300 350 400 450 500 600 700 800 900 HP 200 250 300 350 400 450 500 600 700 800 Option Description Modification for Belt Drive Applications 4 pole 12.0 13.0 14.0 14.5 15.0 16.5 18.5 22.0 24.5 27.5 31.0 4 pole 16.5 17.5 18.5 - Category 1 List Adder $2,014 ODP / WPI 6 pole 14.0 15.0 16.0 16.5 19.0 20.5 23.0 27.5 - Minimum Motor Sheave Pitch Diameter 500 FRAME WPII 8 pole 4 pole 6 pole 8 pole 15.5 12.0 14.0 15.5 16.5 13.0 15.0 19.0 17.0 14.0 17.0 23.0 19.5 14.5 20.0 26.5 22.5 16.0 23.0 30.5 18.0 25.5 20.0 28.5 24.0 34.0 24.5 28.0 31.5 - 4 pole 12.0 13.0 14.0 14.5 15.0 16.0 17.0 - TEFC 6 pole 14.0 15.0 16.0 16.5 18.0 - 8 pole 15.5 16.5 - ODP / WPI /WPII 6 pole 18.0 19.0 20.0 - 580 FRAME TEFC 4 pole 6 pole 16.0 16.5 15.0 17.5 16.0 18.0 16.5 19.0 17.5 20.0 18.5 19.0 - 4 pole 16.5 17.5 18.5 - TEAAC 6 pole 18.0 19.0 20.0 - 8 pole 17.5 18.5 19.5 20.0 20.5 - 8 pole 17.5 18.5 19.5 20.0 20.5 - 8 pole 15.5 16.5 17.5 18.5 19.5 20.0 - Section Part Page Date 2 1 14 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Cancellation Charges A minimum charge of 10% of the order value will be assessed for any order cancellation. For any order less than $ 5,000 (e.g. a parts order), a minimum charge of $ 500 (five hundred U.S. dollars) will be assessed for any order cancellation. The following graph will apply to determine cancellation charges after the order is received and entered at the factory. CANCELLATION CHARGES 100% % OF SELLING PRICE 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% % OF COMPLETION A charge of 15% (fifteen percent) of the total motor price will be assessed if an order is canceled after it has been released for engineering and drafting whether or not the drawings have been completed and/or submitted for approval. Chipper / Crusher Drives These special requirements often include higher than standard inertia and/or torque requirements. Refer such applications to your local Siemens Sales representative for review by factory for frame, pricing and availability. Section Part Page Date 2 1 15 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Couplings List Adder includes mounting only of shrink-fit, customer-supplied coupling which has been finish-bored and keyseated to our standard shaft dimensions. Couplings are to be sent freight prepaid to arrive at the factory at least six (6) weeks prior to scheduled shipment. Code L17 Option Description Mounting of Customer-Supplied, Machined & Balanced 1/2 Coupling Category 2 List Adder $3,386 NOTE: Mounting of couplings to special shaft dimensions or hydraulic couplings require procedures that vary with individual couplings. Refer to your local Siemens Sales representative for review by factory for availability and pricing. Current Transformers *NOTE: Refer to Terminal Box elsewhere in this section for pricing options. Differential Pressure Switch Dwyer Instruments Model No. 1950-1 integral type, explosion-proof pressure switch can be furnished with filtered motors to measure pressure drops across the filter caused by clogging of particles in the filter. Code S35 S36 Option Description Differential Pressure SPDT Switch Differential Pressure Gauge Category 1 3 List Adder $1,957 $1,591 Direction of Rotation Refer to Basic List Prices of rating. Those ratings indicated as “Uni-directional” in the “Rotation” column will require a direction of rotation (Option Code K97 or K98) to be specified at time of order placement. Code K97 K98 K99 Option Description Clockwise Viewed from Motor Drive End Counter-Clockwise Viewed from Motor Drive End Bi-Directional Rotation Category 1 1 1 List Adder No Charge No Charge No Charge Efficiency – Higher Than Standard For a special high efficiency design refer exact requirements to your local Siemens Sales representative for price and availability. Section Part Page Date 2 1 16 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Export Packaging For motors to be export packaged per Siemens standard for overseas shipment…List Adder 6% to the total motor price. Please add 5 working days to the standard lead-time for export boxing. See Shipment Terms & Packaging for additional information. Fan - External Cooling The chart below indicates standard cooling fan materials for TEFC (CZ & CGZ) and TEAAC (CAZ). Also indicated is price for alternate material. Frame & Type (Enclosure) 500 CZ (TEFC) 580 CZ (TEFC) 500 CZ (TEFC)& 580 CZ (TEFC) SH400/SH450/880 CGZ** (TEFC) SH400 CGZ** (TEFC) SH450/880 CGZ** (TEFC) All Frames CAZ (TEAAC) SH560/SH562/SH564 1LA4 (TEFC) SH560/SH562/SH564 1LA4 (TEFC) Frame & Type (Enclosure) 500 CZ (TEFC) 580 CZ (TEFC) 500 CZ (TEFC)& 580 CZ (TEFC) SH400/SH450/880 CGZ** (TEFC) SH400 CGZ** (TEFC) SH450/880 CGZ** (TEFC) All Frames CAZ (TEAAC) SH560/SH562/SH564 1LA4 (TEFC) SH560/SH562/SH564 1LA4 (TEFC) Frame & Type (Enclosure) 500 CZ (TEFC) 580 CZ (TEFC) Speed Standard Material Rotation 2-Pole Aluminum Uni-directional 2-Pole Aluminum hub with nonmetallic* blades Uni-directional 4-Pole & slower Aluminum Bi-directional 2-Pole Aluminum hub with nonmetallic* blades Uni-directional Aluminum Bi-directional 4-Pole & slower 4-Pole & slower All 2-Pole Aluminum Aluminum Steel hub with nonmetallic* blades Uni-directional Uni-directional 4-Pole & Slower Steel Speed Standard Material Rotation 2-Pole Aluminum Uni-directional 2-Pole Aluminum hub with nonmetallic* blades Uni-directional 4-Pole & slower Aluminum Bi-directional 2-Pole Aluminum hub with nonmetallic* blades Uni-directional Aluminum Bi-directional 4-Pole & slower 4-Pole & slower All 2-Pole Uni-directional Aluminum Aluminum Steel hub with nonmetallic* blades Uni-directional Uni-directional 4-Pole & Slower Steel Uni-directional Speed Standard Material Rotation 2-Pole Aluminum Uni-directional 2-Pole Aluminum hub with nonmetallic* blades Uni-directional Section Part Page Date 2 1 17 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories 500 CZ (TEFC)& 580 CZ (TEFC) SH400/SH450/880 CGZ** (TEFC) SH400 CGZ** (TEFC) SH450/880 CGZ** (TEFC) All Frames CAZ (TEAAC) SH560/SH562/SH564 1LA4 (TEFC) SH560/SH562/SH564 1LA4 (TEFC) Code S50 S51 S85 4-Pole & slower Aluminum Bi-directional 2-Pole Aluminum hub with nonmetallic* blades Uni-directional Aluminum Bi-directional 4-Pole & slower 4-Pole & slower All 2-Pole 4-Pole & Slower Aluminum Aluminum Steel hub with nonmetallic* blades Steel Option Description Anodized Aluminum Fan for 500 & 580 Frame, 2-Pole TEFC Only Bronze Fan for 500 & 580 Frame, TEFC Only Steel Fan, Uni-Directional for All CAZ (TEAAC) Uni-directional Uni-directional Uni-directional Category 2 2 2 List Adder $1,412 $3,215 $1,492 *Non-metallic blades may be polypropylene, polyamide, or vestamide. Consult your local Siemens Sales representative for exact material. **Refer to the your local Siemens Sales representative for review by factory for alternate materials for SH400/SH450/880/SH560/SH562/SH564 TEFC frames. Fan Housing Standard fan housing on TEFC 500 & 580 frame motors is cast-iron. All other frame sizes have steel fan housings. Section Part Page Date 2 1 18 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Filters All WPII motors have standard provisions for addition of filters. Various types of filters can be supplied as optional equipment on WPII motors. For filters on ODP or WPI enclosures, consult your local Siemens Sales representative. The standard filters below have an option Category 1. Filters Code Filter Material S30 S31 S32 Galvanized Steel Aluminum Stainless Steel Category 1 1 1 500 Frame $992 $924 $1,864 List Adder 580 Frame $1,064 $1,221 $2,364 680 Frame $1,408 $2,015 $3,368 NOTE: Other filter media is available. Refer exact requirements to your local Siemens Sales representative for price and availability. Flanges The MRPD designation for D-flange mounting is indicated in the motor’s basic MRPD structure. Refer to the Section 1, Part MRPD for more details. A D-flange is available for 500 and 580 frames in a ball bearing, single shaft, and direct connected application only. The D-flanged motor requires foot-mounted support. The D-flange is available for all enclosures in Basic List Prices. D-Flange is available per NEMA Standards or as Custom. The Custom D-Flange would require receipt and review of customer-supplied drawing by your local Siemens Sales representative for review by factory prior to order acceptance. Code R60 R60 R59 R59 D-Flange per NEMA Standard Frame 500 580 List Adder $3,712 $5,993 Custom D-Flange (Customer drawing required) 2 500 2 580 $3,712 $5,993 Category 2 2 Freight As a standard motors are sold FCA-Loaded factory, freight collect with domestic packing only. Frequency - 50 Hertz For 50 hertz ratings not found in the Basic List Price section, increase required HP by a factor of 1.2 and round up to the nearest comparable 60 hertz rating. (Example: To find 400HP - 50 hertz rating, multiply 400HP x 1.2 = 480HP. Use comparable 500HP - 60 hertz rating). See Voltage in this section for proper Basic List Price selection. Section Part Page Date 2 1 19 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Ground Pads Copper ground pads on motor frames. Code R54 Option Description Copper Ground Pads on Frames Category 1 List Adder $351 Hardware Standard external hardware is 300 series stainless steel for all enclosures. Also available is #316 stainless steel for all enclosure bolts, studs, and other fastening devices up through 0.5-inch (M12) size. For other specific hardware requirements refer to your local Siemens Sales representative for pricing and availability. Code R46 Option Description Stainless Steel #316 Hardware Category 3 List Adder $4,302 Hazardous Location / Temperature Code The MRPD designation for Division 2 areas is indicated in the motor’s basic MRPD structure. Refer to Section 1, Part MRPD for more details. Division 2 - For Class I, Groups B, C, and/or D use appropriate list price and frame for the customer-specified enclosure for 1.0 service factor. The motor will meet NEC Article 500 definition for motors permitted in the Class I, Group(s), Division 2 area(s). NEC requirements and restrictions must be observed. Certification of the motor for use in the Division 2 area is not normally provided. Temperature Code: Most ratings are available as a T3 temperature code as defined by NEC. For designs to meet other temperature codes as low as T4 refer exact requirements to your local Siemens Sales representative for review by factory for price and availability. Code D40 Option Description CSA Label for Class 1, Group D, Division 2 Only Category 1 List Adder $234 For 1.15 service factor see Service Factor elsewhere in this section for proper sizing. NOTE: The applicable Class(es) and Group(s) must be specified in the quotation and at time of order. For other classes and groups, refer exact requirements to your local Siemens Sales representative for review by factory for price and availability. Division 2 motors intended for adjustable speed drive application should be referred to your local Siemens Sales representative for review by factory. IEEE 841 Std-2009 (Order Code R61 / Category 2) See Base List Prices, Frame, and Features Section 5B for price, availability, and comments on motors per IEEE841-2009 specification. Inrush Current - Lower than Standard Typical standard inrush currents for most ratings is a maximum 650%. Lower inrush currents are available. This will affect other performance characteristics such as locked rotor torque or breakdown torque. Refer exact requirements to your local Siemens Sales representative for price and availability. Section Part Page Date 2 1 20 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Insulation Motors are supplied with a class F insulation system as standard. Load Inertia The table below lists load inertia values which our standard, polyphase motors can accelerate without injurious temperature rise under the following conditions: 1. Rated voltage and frequency applied at the motor terminals. 2. During accelerating period, connected load torque shall be equal to, or less than, a torque which varies as square of the speed and is equal to 100% of full-load torque at rated speed. 3. Two successive starts with motor at ambient temperature, or one start with motor not exceeding rated temperature. Subsequently, the number of permissible starts will depend upon the time required to accelerate the load from stand still to full speed, the thermal capacity of the motor, and the time required for the motor temperature to return to rated temperature after each such start. Driven equipment requiring higher than standard load inertia may require a larger frame size and/or special rotor designs. Refer exact requirements to your local Siemens Sales representative for price and availability. HP 200 250 300 350 400 450 500 600 700 800 900 1000 1250 1500 1750 2000 2250 2500 3000 3500 4000 4500 5000 3600 86 105 123 141 158 175 191 222 252 280 308 334 395 451 502 548 590 628 694 746 785 813 831 Standard Load Inertia (lb.-ft.2) Exclusive of Motor Inertia RPM 3000 1800 1500 1200 1000 135 831 1304 2238 3496 165 1017 1590 2744 4282 193 1197 1874 3239 5060 221 1373 2152 3723 5820 249 1546 2425 4199 6570 275 1714 2692 4666 7300 301 1880 2955 5130 8030 352 2202 3467 6030 9450 400 2514 3964 6900 10840 446 2815 4447 7760 12200 491 3108 4918 8590 13520 534 3393 5380 9410 14820 4073 11380 4712 13260 5310 15060 5880 16780 6420 18440 6930 20030 7860 8700 9460 10120 10720 900 4508 5540 6540 7530 8500 9460 10400 12250 14060 15830 17560 19260 23390 27350 31170 34860 720 7750 9530 11270 12980 14670 16320 17970 21190 24340 27440 30480 33470 40740 47750 Section Part Page Date 2 1 21 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Noise Requirements Typical no load, free field noise levels of standard design motors are shown below. For guaranteed levels, add 2 dba to the levels below those shown in the following chart. For 50HZ motors, deduct up to 4 dba but total dba with deduction is to be no lower than 80 dba. Typical Overall Level 'A' Scale (dbA at 1 Meter) Enclosure Frame 508 5010 588 5810 5812 6811 6813 3600 RPM 91 89 81 80 83 84 86 1800 RPM 84 84 83 83 83 81 83 1200 RPM 85 85 85 85 85 85 85 900 RPM & Slower 85 82 83 82 83 85 85 WPII 508 5010 588 5810 5812 6811 6813 81 80 80 81 82 83 83 80 81 82 80 81 80 82 82 82 85 82 85 86 82 82 82 83 81 82 82 82 TEFC 509 5011 5013 588 5810 5812 SH400 SH450 880 SH560/SH562/SH564 86 85 88 87 87 87 85 84 85 88 84 85 88 86 86 86 82 84 89 87 80 80 80 80 80 80 81 86 85 83 80 80 80 80 80 80 80 80 81 81 TEAAC 588 5810 5812 6811 6813 87 90 90 89 87 82 82 81 84 84 82 82 82 82 82 82 82 82 82 82 ODP/ WPI NOTE: Lower noise levels may be available. Lower noise level designs may affect motor dimensions. Refer requirements to your local Siemens Sales representative for details, price and availability. Section Part Page Date 2 1 22 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Paint Systems Norwood’s Standard Duty Paint System is a two-part epoxy system in Motor Blue. Refer to the adder below for Siemens Harsh Duty Paint System and Extreme Duty Paint System. Code S03 Option Description S13 Harsh Duty Painting System, Standard Color Extreme Duty Painting System, Standard Color – (All except WPII Enclosure in Frames 5810, 5812, 6811 & 6813) Extreme Duty Painting System, Standard Color – WPII Enclosure, Frame 5810 Extreme Duty Painting System, Standard Color – WPII Enclosure, Frame 5812 Extreme Duty Painting System, Standard Color – WPII Enclosure, Frame 6811 Extreme Duty Painting System, Standard Color – WPII Enclosure, Frame 6813 Standard Duty Painting System with Black Color RAL9005 Y53 Other Colors (Requires Additional Clarification - Munsell or RAL #) S07 S07 S07 S07 S07 Additional Working Weeks* 1 List Adder $4,541 2 $19,791 2 $25,643 2 $24,517 2 $20,979 2 $24,462 0 $1,694 1 $1,694 *If purchased, these Additional Working Weeks must be added to any published motor Lead Times. Rotor Construction / Corrosion Protection The MRPD designation for Copper-bar Rotors is indicated in the motor’s basic MRPD structure. Refer to Section 1, Part MRPD for more details. See Basic List Prices section for standard rotor construction of rating. When a fabricated copper bar rotor is required by specification, use the following List Adder on the rating where a die cast aluminum rotor construction is shown as standard. Category 2 2 2 Code S02 Copper Bar Rotor – Category 2 Frame 508 - 5013 588 - 5810 5812 Option Description Corrosion Protection for the Rotor List Adder $18,274 $21,927 $24,367 Category 1 List Adder $1,884 Section Part Page Date 2 1 23 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Service Factor For 1.15 service factor to accommodate overload conditions above rated horsepower, make the following list price additions to the basic motor price*. Option Description 1.15 SF / Class F Temperature Rise 1.15 SF / Class B Temperature Rise Category 1 2 Use Same HP Rating Next Larger HP** *For non-hazardous locations only. For Division 2 locations, size motor by increasing required HP by 1.15 and round up to nearest HP. **Size motor by increasing required HP by 1.15 and round up to nearest HP. Shaft Extension Standard shaft extension is a short shaft for direct connection. If specified at time of order, 4-pole and slower ball bearing motors can be supplied with a long shaft for direct connection at no charge. The long shaft is standard for belt drive application (See Belt Drive Applications elsewhere in this section). For special shaft extension, tapered or threaded shafts, double shaft extensions on TEFC or TEAAC motors, stub shafts on two-pole compressor motors, shafts longer than 20", special shaft material or other variations, refer exact requirements to your local Siemens Sales representative for review by factory for price and availability. Customer must furnish taper gages. Shaft Seal (Code R87,R88 / Category 2) A shaft seal is sometimes referred to as a shaft slinger or shaft flinger. All anti-friction bearing motors are supplied with a rubber, V-ring, external shaft seal as standard on all enclosures. For alternate rotating shaft seal* on drive end of any enclosure, see chart below. Frame 500 580 SH400 680-SH450 880/SH560/SH562/SH564 Rotating Shaft Seal – Category 2 Drive End List Adder Code R87 $1,267 Code R87 $1,869 Code R87 $2,171 Code R87 $2,659 Code R87 $2,659 Both Ends Code R88 Code R88 Code R88 Code R88 Code R88 List Adder $2,540 $3,739 $4,337 $4,842 $5,318 *When motors are supplied with rotating shaft seal(s), the "BA" and "C" dimensions may increase. Consult factory for exact dimension. All sleeve bearing motors are supplied with aluminum, labyrinth-type shaft seals. Alternate materials are available, refer exact requirements to your local Siemens Sales representative for price and availability. Section Part Page Date 2 1 24 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Shipment Terms & Packaging Standard shipment terms are FCA Loaded, Norwood, OH factory, freight collect with our standard domestic packaging only. Contact your local Siemens Sales representative for other Incoterms. Software Packages Software will be in our standard format and submitted electronically in the medium indicated unless expressly negotiated and entered as a separate line item on the purchase order. Our standard software package includes the following in *.pdf format; a) motor outline drawing b) the calculated motor electrical performance data including speed vs. torque, speed vs. current, and thermal limit curves c) motor instruction manual d) Our standard commercial test report Additional software options; Shaft details data for purposes of torsional analysis...List Adder $605 (Option Code = U68). Seismic analysis per item per location...List Adder $7,054 (Option Code = U66). Supplying software with additional information, in customer-specified formats, and/or in alternative electronic formats may be accommodated. Refer to Norwood Product Lead Times ANCM-70000-xxxx for software and documentation lead times and offerings. Soleplates / Slide Rails / Shims Code R93 R93 R94 R94 R95 R98 R98 R96 Option Description Norwood Standard 2-piece Soleplates (500 & 580 Frames) Norwood Standard 2-piece Soleplates (All Other Frames) Soleplates with prov. for horizontal jackscrews (500 & 580 Frames) Soleplates with prov. for horizontal jackscrews (All Other Frames) Slide Rails for 500 & 580 Frames Stainless Steel Shims (Siemens Standard – 500 & 580 Frames) Stainless Steel Shims (Siemens Standard – All OtherFrames) Vertical Jacking Screws Category 2 2 3 3 2 1 1 1 List Adder $8,811 $10,583 $15,489 $25,814 $5,074 $2,059 $3,084 $234 For special custom made adapter bases to match motor to existing equipment, refer exact details to factory for availability and pricing. Section Part Page Date 2 1 25 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Space Heaters 120/240 Volt, single phase space heaters with max. sheath temperature of 200 oC are standard on all WPII motors and are available as optional equipment on other enclosures. Heaters include leads wired to an auxiliary box mounted on the motor. Other voltages are available and exact requirements should be referred to your local Siemens Sales representative for price and availability. Code R40 Option Description 120/240 Volt, Single-Phase - Low Temp. (200 oC) Category 1 List Adder $1,380 Starting - Reduced Voltage/Soft Start Standard motors are designed for starting at 100% of nameplate voltage. Motors can accelerate normal loads at reduced voltage starting provided the voltage does not dip below 90% of rated voltage at the motor terminals. For soft start or starting on voltages at less than 90% of rated voltage, special electrical designs may be required. Refer complete details of load to be accelerated (driven equipment speed vs. torque curve and load inertia), available voltages, and any other requirements to your local Siemens Sales representative for price and availability. Startup Assistance Field Engineering Services are not included in any of the prices of this pricing guide. We do offer complete installation, field engineering assistance, startup, and repair services. If any of the services are required or for more details on these services, please contact the Siemens Technical Support Communication Center at 1-800-333-7421. Stator - Connections For wye-delta connections*, three leads are provided as standard on single voltage motors, six leads are provided as standard on dual voltage motors. Code S10 S11 S11 S16 Option Description Wye-Delta Connection* - for Low Voltage Motors Only Heavy-Duty Bracing (500 & 580 Frames) Heavy-Duty Bracing (All Other Frames) Longer Than Standard Leads - Up to a Maximum 60 Inches Category 2 2 2 2 List Adder $2,643 $1,053 $1,408 $872 Section Part Page Date 2 1 26 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Stator - Insulation/Treatments Generally, most low voltage motors have random wound coils with a polyester varnish type insulation. All motors 2300 volt and above have form wound stator coils with Siemens’ standard VPI insulation system. For form wound 460 volt system, use list price and frame of comparable 2300 volt rating. Performance data may vary slightly from published data. All insulation systems are class F, non-hygroscopic and are supplied with EPDM rubber lead cable. Because of some environmental conditions, additional stator treatments are available. An anti-fungus treatment (tropicalization) is for humid areas and an anti-abrasion treatment is for areas that may contain abrasive particles that may circulate inside a motor. Anti-abrasion treatment is for ODP, WPI, or WPII enclosures only. Code S00 S00 S01 S01 S01 Option Description Anti-fungus protection for the stator – 500 Frames Anti-fungus protection for the stator – All other Frames Anti-abrasion treatment for the stator – 500/580 Frames Anti-abrasion treatment for the stator – 680/SH400/SH450 Frames Anti-abrasion treatment for the stator – 880/SH560/SH562/SH564 Frames Category 1 1 1 List Adder $377 $627 $1,825 1 $2,032 1 $2,441 Stator - Protective Devices A. Resistance Temperature Detectors - Standard RTD options include a set of six, 3-wire RTD's with Teflon insulated, #22-gauge leads which meet IPTS-68 Standard. Code R65 R17 Option Description (6) 100 Ohm Platinum RTDs; 2/phase 304 Stainless Steel Shielding for Stator RTDs (available only if purchased in conjunction with Stator RTDs) Category 1 List Adder $1,377 2 $565 B. Thermistors - Standard thermistor option includes three Texas Instrument positive temperature coefficient (PTC) type sensors to be used with a Texas Instruments control module. Standard control module is manual reset type with trip indicator, 120 Volt single channel input. Modules with alarm channel are available at additional premium. Standard switch temperatures are 135 C, 155 C or 180 C. Code A16 R14 Option Description Thermistors - (6) PTC – 2/phase PTC control module Category 1 1 List Adder $1,509 $728 C. Thermostats - Texas Instruments (Klixon*) thermostats can be furnished with either normally-open or normally-closed contacts wired to main terminal box. Code R15 R16 Option Description Thermostat - (2) TI Klixon; normally open contacts Thermostat - (2) TI Klixon; normally closed contacts Category 2 1 List Adder $507 $507 Section Part Page Date 2 1 27 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Terminal Boxes / Differential & Surge Protection / Current Transformers / Standoff Insulators Auxiliary Boxes Our standard, cast-iron auxiliary boxes meet NEMA 4X requirements and is segregated to house space heater and temperature instrumentation leads if those devices are purchased. Stainless steel is an option. Code M51 M52 Option Description Auxiliary Box - Stainless Steel Separate Box for Temperature Instrumentation (separate from space heater box) Category 2 List Adder $2,341 2 $842 Main Terminal Box A – Main Terminal Box Size The standard main terminal box is selected on the basis of full load current of the motor and exceeds NEMA volume requirements (see table below). The standard main terminal box location is NEMA F-1 unless specified otherwise at time of order (See Assembly elsewhere in this section). HP Up to 700 701 - 1000 1001 - 1750 1751 - 3000 3001 - 5000 5001 - 7000 460 V or 575 V CI2 CI3 - <= 2300 V CI2 CI2 CI2 CI2 CI3 - <= 4160 V CI2 CI2 CI3 CI3 FS1.5 FS2 <= 6600 V CI3 CI3 CI3 FS3 FS3 FS3 Basic List Price of motor includes main terminal box per following chart. For larger main box, if standard box is CI2 use the following List Adder otherwise use the List Adder difference between the standard box and the desired box size. For main terminal boxes on voltage over 6600V or for larger boxes than those listed below, please refer to the your local Siemens Sales representative for price and availability. Code U80 U81 U82 U84 Box CI3 FS1.5 FS2 FS3 Option Description Cast-Iron – NEMA Type I (6370 cu. In. volume) Fabricated Steel – NEMA Type I (13900 cu. In. volume) Fabricated Steel – NEMA Type II (21750 cu. In. volume) Fabricated Steel – NEMA Type II (57276 cu. In. volume) Category 1 2 2 2 List Adder $2,079 $2,820 $3,017 $4,628 NOTE: Boxes CI2, CI3, and FS1.5 are mounted on the motor and are rotatable in 90-degree increments. Boxes FS2 and FS3 boxes will be free-standing with feet and will require customer to supply support from beneath. Section Part Page Date 2 1 28 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Use the following table to determine minimum main terminal box size for additional features and add for the additional features as listed below. Additional Features (1) Ammeter CT (3) Current Transformers Surge Protection Standoff Insulators Minimum Box Required FS1.5 (a),(b) FS2 (a) FS3 (c) FS1.5 (b) (a) Ametering current transformer and (3) current transformers together requires FS3 box. Ametering current transformer and standoff insulators together require minimum FS2 box. (c) FS3 terminal box will accommodate any combination of the Additional Features listed above. (b) B – Current Transformers / Differential Protection List Price does not include main terminal box. Add for the appropriate main terminal box under “Main Terminal Box”. Code U96 U90 Option Description (1) Ammeter CT (either Main or Neutral Lead - clarification text required) (3) CT's for Differential Protection, 50:5, mounting in main box Category 2 2 List Adder $1,464 $4,399 C – Surge Protection and Accessories Our standard surge protection consists of three lightning arrestors and one surge capacitor mounted in a fabricated terminal box. Price of these varies with motor voltage. See charts below for List Adders: Code U92 U92 U97 Option Description Surge Capacitor and Lightning Arrestors (up to 4160 V)** Surge Capacitor and Lightning Arrestors (over 4160 V & up to 6900 V)** 120/240 V Space Heater for Main Termain Box Category 2 3 2 List Adder $16,919 $23,232 $1,658 **NOTE: Surge protection is not available for motors intended for use with an adjustable frequency drive application. D – Standoff Insulators Standoff insulators are standard feature of FS2 or FS3 terminal boxes. For FS1 terminal box, add per List Adder below. Code U89 Option Description Standoff Insulators Category 2 List Adder $3,417 Section Part Page Date 2 1 29 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Tests Each motor is given tests as may be deemed essential by Siemens. The following is a List Adder table and descriptions of additional test options. An unwitnessed routine test is included at no charge with all motors ordered. When test reports are required, they must be specified at the time the motor is ordered. The test reports will be per NEMA MG1-20. Where applicable, standard value of stray load losses to be used will be per Siemens Product Engineering Standard or IEEE112 unless specified otherwise. Please refer to the Order Codes listed below Routine Test U04 Complete Test U34 Complete Test per API 547 F54 Polarization Index Test U28 Bearing Temperature Test U16 Sound Test (Walk-around) U01 U21 U05 U35 U29 U17 Routine Test Routine Test per API 547 Complete Test Complete Test per API 547 Bearing Temperature Test Sound Test (Walk-around) Frame 500 – 580 680 – SH400-SH450 880 – SH560 – SH562 – SH564 250-500 HP No Charge $13,084 $18,072 $1,530 $4,365 $3,575 List Adder Unwitnessed Tests* 501-1500 HP 1501-2500 HP No Charge No Charge $14,985 $18,547 $21,384 $25,426 $1,530 $1,530 $5,709 $6,856 $3,575 $3,575 2501-5000 HP No Charge $22,405 $30,554 $1,530 $8,104 $3,575 250-500 HP Witnessed Tests* 501-1500 HP 1501-2500 HP 2500-5000 HP $4,762 $13,100 $21,369 $24,378 $7,164 $7,411 $7,480 $14,409 $24,510 $29,637 $9,256 $7,411 Sealed Winding Conformance Test (Spray Test per NEMA MG1) Code = U46 Unwitnessed* $7,355 $8,085 $8,834 $9,339 $15,720 $30,357 $36,936 $11,212 $7,411 $11,515 $17,030 $36,664 $44,440 $13,245 $7,411 Code = U47 Witnessed* $12,033 $13,243 $14,435 *NOTE: Add five (5) working days to lead-time for each Unwitnessed Test or ten (10) working days for each Witnessed Test. Section Part Page Date 2 1 30 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Routine Test Each motor is given a routine test in accordance with ANSI C50.41, NEMA MG1-12 and/or MG1-20 to assure that it is free from electrical and mechanical defects. Included in the test are; Measurement of resistance of winding. Measurement of no load, current, power, and speed at rated voltage and frequency. Insulation resistance. High potential test per NEMA MG1-20. Mechanical balance and vibration per NEMA MG1-7. Complete Test Complete test per NEMA MG1-20 and test analysis includes; Routine test. Determination of efficiency at full, 3/4, and 1/2 loads. Determination of power factor at full, 3/4, and 1/2 loads. Temperature run by either dual frequency method or by direct load. Locked rotor current curve. This is done at reduced voltage to prevent thermal damage to motor. Determination of locked rotor and breakdown torques. Sound Pressure Test Test procedure in accordance with NEMA MG1 part 9. Bearing Temperature Test To determine the stabilized bearing temperature at no load. If a minimum test duration time is required, specify on order. Speed-Torque and Speed-Current Curves Test To provide curves of torque versus speed and input current versus speed at specified input voltages. Polarization Index Test Polarization in accordance with IEEE 45. Efficiency Test – Segregated Loss Method (E1) This test is an efficiency test and analysis in full accord with IEEE 112, Method E1. Efficiency Test – Equivalent Circuit Method (F1) This test is an efficiency test and analysis in full accord with IEEE 112, Method F1. Sealed Winding Conformance Test To test the sealed windings in accordance with NEMA MG1-20.18.2 – Test For Which Stator Cannot Be Submerged. Section Part Page Date 2 1 31 11/12 Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 Modifications & Accessories Torques - Non-Standard Starting or breakdown torques higher than standard usually require special rotor construction. If die cast rotors are standard, copper bar rotors may be required. Even where copper bar rotors are standard, special rotor bar material or rotor construction may be necessary. Refer to your local Siemens Sales representative for pricing, frame, and availability. Voltages The MRPD designation for Voltages is indicated in the motor’s basic MRPD structure. Refer to Section 1, Part MRPD for more details. For sizing and pricing of most common voltages use the following chart; Voltage 380 – 600 601 – 2400 2401 – 4160 4161-4800 4801 – 6900 6901 – 13,800 For 60HZ 440, 480, 575, 600 950, 1000, 2300, 2400 4000, 4160 4800 6600, 6900 Use 50HZ* 380, 415 3000, 3300 - 460 2300 4000 Refer To Your local Siemens Sales Representative 6600 5500, 6000, 6600, 6900 Refer To Your local Siemens Sales Representative *See Frequency elsewhere in this section for proper motor sizing. Warranty Offerings For a copy of our Standard Warranty or for options of a Deferred Warranty or Extended Operational Warranties refer detailed requirements to your local Siemens Sales representative for pricing and availability. Siemens Industry, Inc. Drive Technologies Division – Large Drives Industrial Applications - ANEMA Motors 4620 Forest Avenue Norwood, OH 45212-3396 Phone: 513-841-3100 Fax: 513-841-3101 ANSP-60000-1112 Rev.0 ©2012 Siemens Industry, Inc. All Rights Reserved. Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective companies. Specifications are subject to change without notice.