HAMMOND NEMA Metal Enclosures
NEMA 3R GALVANIZED STEEL ENCLOSURES, HINGE DOOR WITH SNAP LATCH
Specifications:
• Provisions for padlocking on zinc-plated draw pull catch
• Easily removed knockouts on bottom of enclosure
• Panel studs provided for mounting optional panels
• Formed and spot welded from 16 gauge galvanized steel
• Drip-shield top and seam-free sides, front and back
• Galvanized steel hinge has stainless steel pin
MOUSER
STOCK NO.
546-C3R644HCR
546-C3R664HCR
546-C3R864HCR
546-C3R886HCR
546-C3R1086HCR
546-C3R12106HCR
546-C3R12126HCR
546-C3R121210HCR
Optional Panels for C3R
546-N1JP64
546-N1JP66
546-N1JP86
546-N1JP88
546-N1JP108
546-N1JP1210
546-N1JP1212
Hammond
Part No.
C3R644HCR
C3R664HCR
C3R864HCR
C3R886HCR
C3R1086HCR
C3R12106HCR
C3R12126HCR
C3R121210HCR
Series
N1JP64
N1JP66
N1JP86
N1JP88
N1JP108
N1JP1210
N1JP1212
A
A
A
A
A
A
A
A
H
8.00
8.00
10.00
10.00
12.00
14.00
14.00
14.00
Dimensions: in.
W
5.10
7.10
7.10
9.10
9.10
11.10
13.10
13.10
D
4.00
4.00
4.00
6.00
6.00
6.00
6.00
10.00
-
4.25
4.25
6.25
6.25
8.25
10.25
10.25
2.25
4.25
2.25
6.25
6.25
8.25
10.25
-
Fig.
• Designed for use as a wiring/junction box
• Provides protection against rain, sleet,
snow and dripping water
For quantities greater than listed, call for quote.
Panel Dimensions: in.
H
W
4.25
2.25
4.25
4.25
6.25
4.25
6.25
6.25
8.25
6.25
10.25
8.25
10.25
10.25
10.25
10.25
-
rear of the enclosure on collar studs
MOUSER
STOCK NO.
546-N1A16167
546-N1A20209
Hammond
Part No.
N1A16167
N1A20209
• A bonding stud is provided on the door and a grounding stud
Fig.
B
B
H
16.00
20.00
Dimensions: in.
W
16.00
20.00
D
7.00
9.00
4.50
4.54
5.33
6.25
7.33
9.38
11.15
Other sizes available. Contact a
Mouser Service Representative.
Designed for indoor use to house controls, instruments and components not requiring oil-tight or dust-tight protection.
is provided in the box
• Mounting holes are provided in the rear of the enclosure
Price
Each
39.01
31.12
34.78
50.09
45.21
66.80
73.40
121.14
-
NEMA 1 PANEL ENCLOSURES
• Enclosure is formed and spot welded from 14 gauge steel
• Removable 12 or 14 gauge inner panel is mounted in the
A
Applications:
Price
Each
164.71
223.65
Other sizes available. Contact a
Mouser Service Representative.
• Formed from 14 or 16 gauge steel
• Collar studs provided for mounting inner panel (ordered separately)
• Smooth, continuously welded seams ground smooth • Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes
Bonding
stud
provided
on
door
and
grounding
• Oil resistant gaskets are permanently secured
•
stud installed in enclosure
Hammond
C
C
H
16.00
20.00
Dimensions: in.
W
12.00
16.00
D
D
D
D
D
10.20
18.20
18.20
22.20
22.20
10.20
14.20
18.20
18.20
22.20
C
• Cover and enclosure are finished in recoatable
• UL 508 Type 3R, 4, 12, and 13
• CSA Type 3R, 4, 12, and 13
• Complies with: NEMA Type 3R, 4, 12, and 13
IEC 529, IP65
D
For quantities greater than listed, call for quote.
Price
Each
203.60
247.56
D
6.00
8.00
10.93
39.34
47.20
56.51
65.57
-
• Larger than standard NEMA panel used in same
size enclosure.
• 12 or 14 gauge steel construction.
• Slotted corner designed for easier mounting.
• Finished in White.
E
NEMA 12, 13, 4 JIC ENCLOSURES CONTINUOUS HINGE, CLAMP COVER
Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
Specifications:
Finish:
Applications:
• Body formed from 16 or 14 gauge steel • A grounding stud is provided in the • Cover and enclosure are phosphatized, primed
• Instrument enclosures
and finished in recoatable smooth
• Covers are formed from 14 gauge steel enclosure and a bonding stud is
• Electrical junction boxes
provided on the door
ANSI/ASA 61 Gray Powder Coating
• Cover is secured with stainless steel
• Terminal wiring enclosures
clamps and screws
• Removable inner panel is finished in White Powder Coating
Does not meet JIC requirements
*Other
sizes available. Contact a Mouser Service Representative.
Metal Boxes
• Enclosure and door are finished in ANSI/ASA 61
Gray Powder Coating.
• Inner panel is finished in White Powder Coating.
• UL 50 Type 1
• CSA Type 1
• Complies with: NEMA Type 1, IEC 529, IP30
smooth ANSI/ASA 61 Gray Powder Coating.
Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wall mount applications.
Fig.
B
For quantities greater than listed, call for quote.
Panel Dimensions: in.
H
W
13.00
14.50
17.00
18.50
NEMA 4, 12 ECLIPSE SINGLE DOOR SERIES
MOUSER
Hammond
STOCK NO.
Part No.
546-EN4SD16126GY
EN4SD16126GY
546-EN4SD20168GY
EN4SD20168GY
Optional Panels for Eclipse Enclosures
546-EP1212
EP1212
546-EP2016
EP2016
546-EP2020
EP2020
546-EP2420
EP2420
546-EP2424
EP2424
• UL 50 Type 3R
• CSA Type 3R
• Complies with: NEMA Type 3R
• IEC 60529, IP24
*
MOUSER
STOCK NO.
546-1414N4PHA
546-1414N4PHI6
Hammond
Part No.
1414N4PHA
1414N4PHI6
Fig.
E
E
For quantities greater than listed, call for quote.
H
4.00
10.00
Dimensions: in.
W
4.00
8.00
D
3.00
6.00
Panel Dimensions: in.
H
W
8.75
6.88
NEMA 12, 13 LIFT OFF, SCREW COVER
• Body formed from 16 or 14 gauge steel
• Covers are formed from 14 gauge steel
• Cover is secured with captive, plated steel screws,
threaded into sealed wells
• A grounding stud is provided in the enclosure
Finish:
• Cover and enclosure are phosphatized, primed and finished in recoatable
smooth ANSI/ASA 61 gray powder coating
• Removable inner panel is finished in white powder coating
Other sizes available. Contact a Mouser Service Representative.
546-1414SCA
546-1414SCC
1414SCA
1414SCC
F
F
4.00
6.00
F
"Shipped Factory Direct"
Provides a degree of protection from falling dirt, dust, oil, and water.
Specifications:
Price
Each
56.90
118.62
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12, and 13
• Complies with: NEMA Type 3R, 4, 12, and 13
JIC EGP-1-1967 (unless marked)
IEC 529, IP66
4.00
4.00
3.00
3.00
Applications:
• Instrument enclosures
• Electrical junction boxes
• Terminal wiring enclosures
For quantities greater than listed, call for quote.
4.87
2.87
42.93
50.00
• UL 508 Type 12 and 13
• CSA Type 12, and 13
• Complies with: NEMA Type 12, and 13
JIC EGP-1-1967 (unless marked)
IEC 529, IP65
G
NEMA 4X STAINLESS STEEL JIC ENCLOSURES
Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion may be a problem.
Specifications:
• Body formed from 14 gauge Type 304 stainless steel
• Continuous hinged cover is secured with stainless steel
clamps and screws
546-1414N4PHSSE
546-1414N4PHSSO6
© Copyright 2014 Mouser Electronics
2230
1414N4PHSSE
1414N4PHSSO6
• A bonding stud is provided on the door
and a grounding stud is provided
in the enclosure
G
G
6.00
16.00
6.00
14.00
mouser.com/hammond-manufacturing
Finish:
• Cover and enclosure are natural stainless
steel with a smooth brushed finish
• Removable inner panel is finished in White Powder Coating
4.00
6.00
For quantities greater than listed, call for quote.
4.88
14.75
4.88
12.88
217.91
605.90
• UL 508 Type 3R, 4, 4X, and 12
• CSA Type 3R, 4, 4X, and 12
• Complies with: NEMA Type 3R, 4, 4X, and 12
JIC EGP-1-1967
IEC 529, IP66
(800) 346-6873
© Copyright 2014 Mouser Electronics