1
CURRICULUM VITAE
Gurakuq Dajaku
INFORMATAT THEMELORE
FEAAM GmbH &
Universiteti Ushtarak i Mynihut
Werner-Heisenberg-Weg 39
85577 Neubiberg, Germany
Tel.: +49-89 6004-4120
Datëlindja: 22. 02. 1974,
Vendi i lindjës: Skënderaj, Kosovë.
Gjinia: M
Statusi civil: I martuar
e-mail: gurakuq.dajaku@unibw.de
EDUKIMI
2006
2002 -2006
Dr. -Ing., Universiteti Ushtarak i Mynihut
Studimet e Doktorratures në Universitetin Ushtarak të Mynihut
Teza : Modelimi Elektromagnetic dhe Termik i MakinavePM me
Shfrytezim te Lartë
1997
Inxhinier i diplomuar, Universiteti i Prishtinës, Fakulteti Teknik
Teza: Realizimi i PID Rregullatorit me Mikroprocesor
1992 -1997
Studimet në Universitetin e Prishtinës, Departamenti i Rregullimit
dhe Automatikes
KARRIERA PROFESIONALE DHE THIRRJET AKADEMIKE
2011-vazhdon
Ligjërues, Universiteti i Prishtinës, Fakulteti i Inxhinierisë
Elektrike, Kosovë
2008-vazhdon Ligjërues, Universiteti Ushtarak i Mynihut, Fakulteti i
Elektroteknikes dhe Informatikes, Gjermani
2007-vazhdon
2002-2006
Bashkpunëtor Shkencor pranë Kompanisë FEAAM GmbH (Qënder
Hulumtuese për Ngasje Elektrike në Mynih))
Asistent në Institutin për Ngasje Elektrike dhe Automatikë,
Univerëiteti Ushtarak i Mynihut, Gjermani
LËNDËT E MBAJTURA
2011- vazhdon
Modelimi dhe Simulimi i Sistemeve,
Universiteti i Prishtinës, Fakulteti i Inxhinierisë Elektrike, Kosovë
2008 - vazhdon
Analiza e Ngasjeve Elektrike me Elemente të Fundme,
Universiteti Ushtarak i Mynihut, Gjermani
2
PUBLIKIMET SHKENCORE
1.
Dajaku G.: “Electromagnetic and thermal modeling of highly utilized PM
machines”, (ISBN: 978-3-8322- 5415-5), Ph. D. Thesis 2006, University of
Federal Defence Munich, Institute for Electrical Drives and Actuators.
2.
Dajaku G., Gerling D.: “Three-dimensional analytical calculation of induction
machines with multilayer rotor structure in cylindrical coordinates”, Electrical
Engineering (Archiv für Elektrotechnik), Springer-Verlag, November 2003,
Germany.
3.
Dajaku G., Gerling D.: “Comparison of Different Calculation Methods for the
Induction Motor with Multilayer Rotor Structure”, 16th International
Conference on Electrical Machines (ICEM-04), 05.-08. September 2004,
Cracow, Poland.
4.
Dajaku G., Gerling D.: “Novel lumped-parameter thermal model for electrical
systems”, 11th European Conference on Power Electronics and Applications
(EPE), 11.-14. September 2005, Dresden, Germany.
Dajaku G., Gerling D.: “Torque Calculation of a PM Machine with Different FE
Calculation Methods”, 23rd CADFEM Users Meeting, 09.-11. November 2005,
Bonn, Germany.
5.
6.
Dajaku G., Gerling D.: “Thermal Calculation of Systems with Distributed Heat
Generation”, International Conference for Thermal, Thermomechanical and
Emerging Technology (ITHERM), 30.Mai - 02.Juni 2006, San Diego (CA),
USA.
7.
Dajaku G., Gerling D.: “Vergleich verschiedener FE Berechnungsmethoden für
das elektromagnetische Drehmoment von PM Maschinen”, NAFEMS Magazin,
July 2006, Nr. 2-2006.
8.
Dajaku G., Gerling D.: “An Improved Thermal Model for Electrical Machines”,
International Conference on Electrical Machines (ICEM-2006), 02.-05.
September 2006, Crete, Greece.
9.
Dajaku G., Gerling D.: “An Accurate Electromagnetic and Thermal Analysis of
Electric Machines for Hybrid Electric Vehicle”, 22nd International Battery,
Hybrid and Fuel Cell Electric Vehicle Symposium & Exposition (EVS-22), 23.28.10.2006, Yokohama, Japan.
Dajaku G., Gerling D.: “The correct analytical expression for the phase
inductance of the salient pole machines”, 2007 IEEE International Electric
Machines & Drives Conference (IEMDC 2007), 3-5 May Antalya, Turkey.
Dajaku G., Gerling D.: “A New Electromagnetic Model for PM Synchronous
Machines”, 12th European Conference on Power Electronics and Applications
(EPE 2007) 2 - 5 September 2007, Aalborg, Denmark.
Dajaku G., Gerling D.: “The Characteristics of the Total Phase Inductance and
the Angle Gamma for Salient Pole Synchronous Machines”, International
Conference on Electrical Machines and Systems (ICEMS 2007), 08.-11.
Oktober 2007, Seoul, South-Korea.
10.
11.
12
3
13
Dajaku G., Gerling D.: “Design of Permanent Magnet Machines for Hybrid
Vehicles”, 25th CADFEM Users Meeting, 21.-23. November 2007, Dresden,
Germany.
14
Gerling D., Dajaku G., Lange B.: “Electric Traction for Automobiles Comparison of Different Wheel-Hub Drives”, 23rd International Electric
Vehicle Symposium (EVS-23), 02.-05. Dezember 2007, Anaheim, CA (USA).
15
Dajaku G., Gerling D.: “Influence of the Air-gap Permeance Harmonics on the
Performances of the Salient Pole Synchronous PM Machines”, 18-th
International Conference on Electrical Machines (ICEM2008), 06.-09.
September 2008, Vilamoura, Portugal.
16
Dajaku G., Gerling D.: “Analysis of Different Permanent Magnet Machines for
Hybrid Vehicles Applications”, 26th CADFEM Users Meeting, 22.-24. October
2008, Darmstadt, Germany.
17
Dajaku G., Gerling D.: “FE Analysis of Different Permanent Magnet Machines
for Hybrid Vehicles Applications”, ANSYS-CADFEM Infoplaner, Ausgabe
01/2009.
18
Dajaku G., Gerling D.: “Magnetic Radial Force Density of the PM machine
with 12-teeth/10-poles Winding Topology”, International Electric Machines
and Drives Conference (IEMDC-2009), 03.-06. Mai 2009, Miami (FL), USA.
Dajaku G., Gerling D.: “Skewing Effect on the PM Flux-Linkage High
Harmonics of the PM Machines with Delta Winding”, 13th European
Conference on Power Electronics and Applications (EPE-2009), 08.-10.
September 2009, Barcelona, Spain.
19
20
Dajaku, G.; Gerling, D.: “Stator Slotting Effect on the Magnetic Field
Distribution of Salient Pole Synchronous Permanent-Magnet Machines”, IEEE
Transactions on Magnetics, Volume 46, No. 9, September 2010.
21.
Dajaku G., Gerling D.: “Determination of Air-Gap Flux Density due to Magnets
using the New Analytical Model”, 19-th International Conference on Electrical
Machines (ICEM2010), 06.-08. September 2010, Rome, Italy.
22.
Hetemi F., Dajaku G., Gerling D.: “Influence of Magnet Thickness and Magnet
Orientation on the Performance of IPMSM”, 19-th International Conference on
Electrical Machines (ICEM2010), 06.-08. September 2010, Rome, Italy.
23.
Gerling D., Dajaku G., Mühlbauer K.: “Electric Machine Design Tailored for
Powertrain Optimization”, The 25th World Battery, Hybrid and Fuel Cell
Electric Vehicle Symposium & Exhibition (EVS), 5.-9. November 2010,
Shenzhen, China.
24.
Gerling D., Dajaku G., Mühlbauer K.: “Cost-Effective Electric Traction Drive
with High Efficiency at Low-Load Operation”, VDE Kongress eMobility 2010,
8.-9. November, Leipzig, Germany.
25.
Dajaku G., Gerling D.: “A Novel 24-Slots/10-Poles Winding Topology for
Electric Machines”, International Electric Machines and Drives Conference
(IEMDC-2011), 15.-18. Mai 2011, Niagara Fall, Canada.
4
26.
Dajaku G., Gerling D.: “Evaluation of Iron Losses and Efficiency
Improvements in Electric Machines”, CADFEM Symposium "Energieeffizienz Elektrische Antriebe und Wandler", 18. Mai 2011, Vogel Convention Center,
Würzburg, Germany.
27.
Dajaku G., Gerling D.: “Eddy Current Loss Minimization of PM Machines
using High-Efficiency 12-teeth/10-poles Windint Topology”, International
Conference on Electrical Machines and Systems (ICEMS-2011), 20.-23. August
2011, Beijing, China.
28.
Mayer, J.; Dajaku, G.; Gerling, D.: “Mathematical Optimization of the MMFFunction and -Spectrum in Concentrated Winding Machines”, International
Conference on Electrical Machines and Systems (ICEMS-2011), 20.-23. August
2011, Beijing, China.
29.
Dajaku G., Gerling D.: “Cost-Effective and High-Performance Motor Designs”,
1st International Electric Drives Production Conference 2011 (EDPC-2011),
27.-30. September 2011, Erlangen-Nürnberg, Germany.
30.
Gerling D., Dajaku G., Mühlbauer K.: “Comparison of Different Methods for
Efficiency Improvement of the Electrical Drive-Train”, 12-th Stuttgart
International Symposium, Automotive and Engine Technology, (FKFS12-2012),
13.-14. March 2012, Stuttgart, Germany.
31.
Dajaku G., Gerling D.: “Efficiency Improvements of Electric Machines for
Automotive Application”, 26th International Battery, Hybrid and Fuel Cell
Electric Vehicle Symposium & Exposition (EVS-26), 06.-09.05.2012, Los
Angeles, CA, USA.
32.
Dajaku G., Gerling D.: “Air-Gap Flux Density Characteristics of Salient Pole
Synchronous Permanent-Magnet Machines,” IEEE Transactions on Magnetics,
vol. 48, no. 7, July 2012, pp. 3676–3683.
33.
Dajaku G., Gerling D.: “A Novel 12-Teeth/10-Poles PM Machine with Flux
Barriers in Stator Yoke”, 20-th International Conference on Electrical
Machines (ICEM’2012), 02.-05. September 2012, Marseille, France.
34.
Xie W., Dajaku G., Gerling D.: “Analytical Method for Predicting the Air-Gap
Flux Density of Dual-Rotor Permanent-Magnet (DRPM) Machine”, 20-th
International Conference on Electrical Machines (ICEM’2012), 02.-05.
September 2012, Marseille, France.
35.
Dajaku G., Gerling D.: “Low Costs and High-Efficiency Electric Machines”,
2nd International Electric Drives Production Conference 2012 (EDPC-2012),
16.-17. October 2012, Erlangen-Nürnberg, Germany.
36.
Dajaku G., Gerling D.: “Different Novel Methods for Reduction of Low Space
Harmonics for the Fractional Slot Concentrated Windings”, The 15th
International Conference on Electrical Machines and Systems (ICEMS-2012),
21.-24. October 2012, Sapporo, Japan.
37.
Dajaku G., Gerling D.: “A Novel Tooth Concentrated Winding with Low Space
Harmonic Contents”, International Electric Machines and Drives Conference
(IEMDC-2013), 12.-15. Mai 2011, Chicago, USA.
5
38.
Xie W., Wang X., Dajaku G., Gerling D., Kennel R.: “Improvement and
Comparison of Efficiency and Low Cost Drive System based on DTC and
DTC-SVM”, International Electric Machines and Drives Conference (IEMDC2013), 12.-15. Mai 2011, Chicago, USA.
39.
Dajaku G., Gerling D.: “The Influence of Permeance Effect on the Magnetic
Radial Forces of PM Synchronous Machines,” IEEE Transactions on
Magnetics, (paper accepted).
40.
Dajaku G., Gerling D.: “New Self-Excited Synchronous Machine with Tooth
Concnetrated Winding”, 3nd International Electric Drives Production
Conference 2013 (EDPC-2013), 29.-30. October 2013, Erlangen-Nürnberg,
Germany (paper accepted).
Dajaku G., Gerling D.: “Different Novel Elctric Machine Designs for
Automotive Applications”, 27th International Battery, Hybrid and Fuel Cell
Electric Vehicle Symposium & Exposition (EVS-27), 17.-20. November, 2013,
Barcelona, Spain (paper accepted).
Dajaku G., Gerling D.: “Novel Winding Topologies for Synchronous and
Asynchronous Machines”, Haus der Technik, 26./27.. November, 2013,
Munich, Germany (paper accepted).
41.
42.
GJUHËT
Shqip
- gjuhë amtare
Anglisht
- rrjedhshëm
Ghermanisht - rrjedhshëm
Mynih, Maj, 2013
Gurakuq Dajaku
_______________